Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 13-10-2020 20:51:11

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

HDMI amdgpu

Bonjour,

Suite à l'installation toute fraîche sur un nouveau portable, j'ai un souci d'écran branché en HDMI.

PC portable :
Msi bravo 17
RYZEN 5 avec gpu graphic radeon rx 5500m

Installation :
Debian busters en mode legacy, kernel 4.9
Puis migration vers bullseye et le kernel 5.8.0-2
Sous KDE 5

Lors du boot, mon deuxième écran s'allume, le logo debian s'affiche (aussi bien sur le 2ième écran que sur le principal).
Puis à l'invite du mot de passe de session le 2ième écran s'éteint => plus d'HDMI.

J'ai installé le xrandr qui me renvois aucun écran HDMI de branché

ludo@debian-msi:~$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 382mm x 215mm
   1920x1080    144.03*+  60.01  
   1680x1050    144.03  
   1280x1024    144.03  
   1440x900     144.03  
   1280x800     144.03  
   1280x720     144.03  
   1024x768     144.03  
   800x600      144.03  
   640x480      144.03



En suivant les tutos j'ai bien installé les pilotes libre :

apt-get install xserver-xorg-video-amdgpu



ainsi que :

apt-get install apt install firmware-linux-nonfree firmware-amd-graphics libgl1-mesa-dri libglx-mesa0 mesa-vulkan-drivers xserver-xorg-video-all



Je viens à vous, après plusieurs jours de lecture de wiki et de forum (archlinux, debian-facile, linux-config, ...) je ne parviens pas à faire fonctionner la sortie HDMI .
(je suis en arrêt maladie pour 2 semaines, j'ai donc le temps de vous lire et de vous répondre tongue)

Merci d'avance.

Dernière modification par ludopika (14-10-2020 06:49:54)

Hors ligne

#2 14-10-2020 09:59:25

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

Bonjour
tout ce que tu a installé est normalement sur une installation neuve déjà.
sauf le firmware amd


apt --reinstall install firmware-amd-graphics
 


ps: utilise l'option "--reinstall install" c'est plus propre a moins que tu sois sur qu' is ne soient pas installé
ou alors vérifie leurs présences


apt policy firmware-amd-graphics
 


retour pour moi


firmware-amd-graphics:
  Installé : (aucun)
  Candidat : 20190114-2
 Table de version :
     20190114-2 500
        500 http://deb.debian.org/debian buster/non-free amd64 Packages
 



pour commencer un lspci


lspci
 



sur un portable c'est le multi-écran c'est spécial et activé l'écran externe peut être une touche du clavier ?
on peu vérifier ton driver


apt --reinstall install mesa-utils
 



puis en "user"


glxinfo -B
 



sinon ceci me semble correct


Lors du boot, mon deuxième écran s'allume, le logo debian s'affiche (aussi bien sur le 2ième écran que sur le principal).
Puis à l'invite du mot de passe de session le 2ième écran s'éteint => plus d'HDMI.
 


il faut trouver l'astuce pour soit afficher sur les deux (clone) , soit désactiver "eDP" (écran interne) et basculer sur le HDMI

il faut voir le log de X (sauf si tu est en wayland )

ps: pour bullseye tu a bien fait , matériel très récent (cpu R5 Renoir et gpu RX5500M ).

Hors ligne

#3 14-10-2020 14:46:02

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Bonjour robert2a,

Réponse pour les firmware-graphics :

root@debian-msi:~# apt --reinstall install firmware-amd-graphics
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'
état... Fait
0 mis à jour, 0 nouvellement installés, 1installés, 0 à enlever et 1 non mis à jour.
Il est nécessaire de prendre 0 o/4.934 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
(Lecture de la base de données... 168103 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../firmware-amd-graphics_20200918-1_all.deb ...
Dépaquetage de firmware-amd-graphics (20200918-1) sur (20200918-1) ...
Paramétrage de firmware-amd-graphics (20200918-1) ...
Traitement des actions différées (« triggers ») pour initramfs-tools (0.139) ...
update-initramfs: Generating /boot/initrd.img-5.8.0-2-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125a-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168fp-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_gpu_info.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_ta.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_asd.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_sos.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_rlc.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_mec2.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_mec.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_sdma.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_vcn.bin for module amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_smc.bin for module amdgpu



Vérification de la présence en user :

ludo@debian-msi:~$ apt policy firmware-amd-graphics
firmware-amd-graphics:
  Installé : 20200918-1
  Candidat : 20200918-1
 Table de version :
 *** 20200918-1 500
        500 http://ftp.be.debian.org/debian bullseye/non-free amd64 Packages
        100 /var/lib/dpkg/status
     20190114-2 500
        500 http://deb.debian.org/debian buster/non-free amd64 Packages



lspci :

ludo@debian-msi:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 7
01:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev c1)
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
03:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 14 [Radeon RX 5500/5500M / Pro 5500M] (rev c1)
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 HDMI Audio
04:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
06:00.0 Non-Volatile memory controller: Solid State Storage Technology Corporation Device 9100 (rev 03)
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Renoir (rev c7)
07:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
07:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir USB 3.1
07:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir USB 3.1
07:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor (rev 01)
07:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller
08:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)
08:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)



install mesa-utils :

root@debian-msi:~# apt --reinstall install mesa-utils
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'
état... Fait
Les paquets supplémentaires suivants seront installés :
  libglew2.1
Paquets suggérés :
  glew-utils
Les NOUVEAUX paquets suivants seront installés :
  libglew2.1 mesa-utils
0 mis à jour, 2 nouvellement installés, 0 à enlever et 1 non mis à jour.
Il est nécessaire de prendre 34,9 ko/195 ko dans les archives.
Après cette opération, 1.001 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de :1 http://ftp.be.debian.org/debian bullseye/main amd64 mesa-utils amd64 8.4.0-1+b1 [34,9 kB]
34,9 ko réceptionnés en 0s (272 ko/s)
Sélection du paquet libglew2.1:amd64 précédemment désélectionné.
(Lecture de la base de données... 168103 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libglew2.1_2.1.0-4+b1_amd64.deb ...
Dépaquetage de libglew2.1:amd64 (2.1.0-4+b1) ...
Sélection du paquet mesa-utils précédemment désélectionné.
Préparation du dépaquetage de .../mesa-utils_8.4.0-1+b1_amd64.deb ...
Dépaquetage de mesa-utils (8.4.0-1+b1) ...
Paramétrage de libglew2.1:amd64 (2.1.0-4+b1) ...
Paramétrage de mesa-utils (8.4.0-1+b1) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.3-2) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-3) ...



Et pour finir le glxinfo :

ludo@debian-msi:~$ glxinfo -b
33



Je tente un reboot et te tient au courant.

Dernière modification par ludopika (14-10-2020 14:53:36)

Hors ligne

#4 14-10-2020 15:15:51

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Re bonjour !

j'ai oublié de te répondre pour plasma ou wayland, j'utiise plasma smile

Le reboot ne s'est pas bien déroulé, l'écran fini par rester noir avec le curseur tout en haut (sans clignotement).
Après une petite attente (+/- 2 minutes) je l'ai éteint en mode "bourrin" avec le bouton physique, puisqu'aucune touche ne réagissaient pas.

En ce qui concerne le log X, je suis allé voir en utilisant might commander (en user).
Je t'avoue franchement ne pas trop savoir ou regarder :
screen17.png

Et donc toujours pas de sortie hdmi ni avec arandr (xrandr en mode graphique), ni en faisant FN + F2 (touche d'extension d'écran).

Merci à toi pour ton précieux temps et ton aide smile .

P.S. je dois préciser que l'install s'est faite sous mode vga=normal dans les options, sinon j'avais droit à un écran tout hachuré illisible.
J'en déduis que le framebuffer "merdouille" suite à mes recherches / lectures.
Peut-être une piste de ce coté là ?

Dernière modification par ludopika (14-10-2020 15:43:28)

Hors ligne

#5 15-10-2020 05:41:48

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

Bonjour
tu te trompe c'est -B


glxinfo -B
 


ps: majuscule et minuscule important  et en user la commande (de mon #2 )

pour plasma connaît pas , regarder dans /var/log/Xorg.o.log (le X est en  majuscule)
ou dans ton home dans les fichiers cachées  /home/tonuser/.local/  (de mémoire , tu dois trouver un Xorg.0.log )

sinon ta machine est très récente un peu normal pour les bugs

ps: a priori tu n'a qu'un gpu 5500M et ce n'est pas un apu (dans le processeur) mais pas sur  smile

Dernière modification par robert2a (15-10-2020 05:49:27)

Hors ligne

#6 15-10-2020 05:45:11

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Bonjour

Effectivement je me suis trompé.
Il y a maintenant un souci lors de la mise en veille ou shutdown. Le pc reste écran noir ...
J'ai regardé (lu) dans les logs boot, xorg, kernel, syslog mais je n'ai pas trouvé matière à chercher plus loin.
(c'est du javanais, mais rien n'indique une erreur)
Serait-ce encore un souci de jeunesse du kernel 5.8.0.2 ? attendre le kernel 5.9?

ludo@debian-msi:~$ glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: X.Org (0x1002)
    Device: AMD RENOIR (DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1) (0x1636)
    Version: 20.1.9
    Accelerated: yes
    Video memory: 512MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.6
    Max compat profile version: 4.6
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
    VBO free memory - total: 289 MB, largest block: 289 MB
    VBO free aux. memory - total: 3009 MB, largest block: 3009 MB
    Texture free memory - total: 289 MB, largest block: 289 MB
    Texture free aux. memory - total: 3009 MB, largest block: 3009 MB
    Renderbuffer free memory - total: 289 MB, largest block: 289 MB
    Renderbuffer free aux. memory - total: 3009 MB, largest block: 3009 MB
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 512 MB
    Total available memory: 3584 MB
    Currently available dedicated video memory: 289 MB
OpenGL vendor string: X.Org
OpenGL renderer string: AMD RENOIR (DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 20.1.9
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 20.1.9
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.1.9
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

Dernière modification par ludopika (15-10-2020 05:51:27)

Hors ligne

#7 15-10-2020 05:58:56

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

pour le retour de glxinfo -B c'est correct


03:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 14 [Radeon RX 5500/5500M / Pro 5500M] (rev c1)
 




01:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev c1)
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
 




07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Renoir (rev c7)
 



la je suis surpris , tu a deux gpu (display et vga) , deux PCI Express switch  (navi 10 xl )
si tu trouve le log de X ce serait bien

par exemple un :


cat /var/log/Xorg.0.log
 


ou dans ton /home/.......
et tu le poste ici

nota:


Il y a maintenant un souci lors de la mise en veille ou shutdown. Le pc reste écran noir ...
 


tu n'a plus qu'un souci de veille ? , la machine démarre correctement jusqu'au bureau ?

ps: au niveau portable je connais pas le nouveau matériel AMD , le type de cpu et gpu

tu remarque que le device est nommé "renoir" et pas "5500M"


Device: AMD RENOIR (DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1) (0x1636)
 

Dernière modification par robert2a (15-10-2020 06:10:03)

Hors ligne

#8 15-10-2020 06:08:21

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Il y a une floppée de ligne roll

[     5.976] (--) Log file renamed from "/var/log/Xorg.pid-697.log" to "/var/log/Xorg.0.log"
[     5.977]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     5.977] Build Operating System: Linux 4.19.0-8-amd64 x86_64 Debian
[     5.977] Current Operating System: Linux debian-msi 5.8.0-2-amd64 #1 SMP Debian 5.8.10-1 (2020-09-19) x86_64
[     5.977] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-2-amd64 root=UUID=077fd9c7-aadd-4e6e-a778-5a296906af4b ro vga=normal quiet
[     5.977] Build Date: 31 March 2020  10:14:40AM
[     5.977] xorg-server 2:1.20.8-2 (https://www.debian.org/support)
[     5.977] Current version of pixman: 0.36.0
[     5.977]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     5.977] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.977] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 15 06:09:25 2020
[     5.979] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.979] (==) No Layout section.  Using the first Screen section.
[     5.979] (==) No screen section available. Using defaults.
[     5.979] (**) |-->Screen "Default Screen Section" (0)
[     5.979] (**) |   |-->Monitor "<default monitor>"
[     5.980] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     5.980] (==) Automatically adding devices
[     5.980] (==) Automatically enabling devices
[     5.980] (==) Automatically adding GPU devices
[     5.980] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.982] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     5.982]  Entry deleted from font path.
[     5.984] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     5.984] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.984] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.984] (II) Loader magic: 0x563be73abe20
[     5.984] (II) Module ABI versions:
[     5.984]  X.Org ANSI C Emulation: 0.4
[     5.984]  X.Org Video Driver: 24.1
[     5.984]  X.Org XInput driver : 24.1
[     5.984]  X.Org Server Extension : 10.0
[     5.985] (++) using VT number 7

[     5.985] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.986] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.998] (II) xfree86: Adding drm device (/dev/dri/card1)
[     6.007] (--) PCI: (3@0:0:0) 1002:7340:1462:12ac rev 193, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfe500000/524288, BIOS @ 0x????????/131072
[     6.007] (--) PCI:*(7@0:0:0) 1002:1636:1462:12ac rev 199, Mem @ 0xb0000000/268435456, 0xc0000000/2097152, 0xfe400000/524288, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[     6.007] (II) LoadModule: "glx"
[     6.010] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.014] (II) Module glx: vendor="X.Org Foundation"
[     6.014]  compiled for 1.20.8, module version = 1.0.0
[     6.014]  ABI class: X.Org Server Extension, version 10.0
[     6.014] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[     6.014]  loading driver: amdgpu
[     6.014] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[     6.014]  loading driver: amdgpu
[     6.014] (==) Matched amdgpu as autoconfigured driver 0
[     6.014] (==) Matched ati as autoconfigured driver 1
[     6.014] (==) Matched modesetting as autoconfigured driver 2
[     6.014] (==) Matched fbdev as autoconfigured driver 3
[     6.014] (==) Matched vesa as autoconfigured driver 4
[     6.014] (==) Assigned the driver to the xf86ConfigLayout
[     6.014] (II) LoadModule: "amdgpu"
[     6.014] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[     6.016] (II) Module amdgpu: vendor="X.Org Foundation"
[     6.016]  compiled for 1.20.4, module version = 19.1.0
[     6.016]  Module class: X.Org Video Driver
[     6.016]  ABI class: X.Org Video Driver, version 24.0
[     6.016] (II) LoadModule: "ati"
[     6.016] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[     6.016] (II) Module ati: vendor="X.Org Foundation"
[     6.016]  compiled for 1.20.4, module version = 19.1.0
[     6.016]  Module class: X.Org Video Driver
[     6.016]  ABI class: X.Org Video Driver, version 24.0
[     6.095] (II) LoadModule: "radeon"
[     6.095] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[     6.098] (II) Module radeon: vendor="X.Org Foundation"
[     6.098]  compiled for 1.20.4, module version = 19.1.0
[     6.098]  Module class: X.Org Video Driver
[     6.098]  ABI class: X.Org Video Driver, version 24.0
[     6.098] (II) LoadModule: "modesetting"
[     6.098] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.099] (II) Module modesetting: vendor="X.Org Foundation"
[     6.099]  compiled for 1.20.8, module version = 1.20.8
[     6.099]  Module class: X.Org Video Driver
[     6.099]  ABI class: X.Org Video Driver, version 24.1
[     6.099] (II) LoadModule: "fbdev"
[     6.099] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     6.100] (II) Module fbdev: vendor="X.Org Foundation"
[     6.100]  compiled for 1.20.0, module version = 0.5.0
[     6.100]  Module class: X.Org Video Driver
[     6.100]  ABI class: X.Org Video Driver, version 24.0
[     6.100] (II) LoadModule: "vesa"
[     6.100] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     6.101] (II) Module vesa: vendor="X.Org Foundation"
[     6.101]  compiled for 1.20.9, module version = 2.5.0
[     6.101]  Module class: X.Org Video Driver
[     6.101]  ABI class: X.Org Video Driver, version 24.1
[     6.101] (II) AMDGPU: Driver for AMD Radeon:
  All GPUs supported by the amdgpu kernel driver
[     6.101] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
  ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
  ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
  ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
  ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
  ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
  ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
  ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
  ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
  ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
  ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
  ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
  ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
  ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
  ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
  ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
  ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
  ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
  ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
  ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
  ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
  ATI Radeon 9800PRO, ATI Radeon 9800XT,
  ATI Radeon Mobility 9600/9700 (M10/M11),
  ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
  ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
  ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
  ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
  ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
  ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
  ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
  ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
  ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
  ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
  ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
  ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
  ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
  ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
  ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
  ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
  ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
  ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
  ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
  ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
  ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
  ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
  ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
  ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
  ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
  ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
  ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
  ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
  ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
  ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
  ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
  ATI FireGL V3350, ATI Mobility Radeon X1450,
  ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
  ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
  ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
  ATI FireGL V3400, ATI Mobility FireGL V5250,
  ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
  ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
  ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
  ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
  ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
  ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
  ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
  ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
  ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
  ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
  ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
  ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
  AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
  ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
  ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
  ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
  ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
  ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
  ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
  ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
  ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
  ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
  ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
  ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
  ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
  ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
  ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
  ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
  ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
  ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
  ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
  ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
  ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
  ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
  ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
  ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
  ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
  ATI FireGL V3600, ATI Radeon HD 2600 LE,
  ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
  ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
  ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
  ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
  ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
  ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
  ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
  ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
  ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
  ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
  ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
  AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
  AMD Radeon HD 6300 Series Graphics,
  AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
  ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
  AMD Firestream 9350, ATI Radeon HD 5800 Series,
  ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
  ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
  ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
  ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
  REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
  ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
  AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
  AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
  ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
  MULLINS, KAVERI, HAWAII
[     6.103] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.103] (II) FBDEV: driver for framebuffer: fbdev
[     6.103] (II) VESA: driver for VESA chipsets: vesa
[     6.110] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[     6.117] (WW) Falling back to old probe method for modesetting
[     6.131] (WW) Falling back to old probe method for fbdev
[     6.131] (II) Loading sub module "fbdevhw"
[     6.131] (II) LoadModule: "fbdevhw"
[     6.131] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     6.132] (II) Module fbdevhw: vendor="X.Org Foundation"
[     6.132]  compiled for 1.20.8, module version = 0.0.2
[     6.132]  ABI class: X.Org Video Driver, version 24.1
[     6.132] (II) AMDGPU(G0): [KMS] Kernel modesetting enabled.
[     6.134] (II) AMDGPU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     6.134] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[     6.134] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     6.134] (==) AMDGPU(0): Default visual is TrueColor
[     6.135] (==) AMDGPU(0): RGB weight 888
[     6.135] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[     6.135] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x1636)
[     6.135] (II) Loading sub module "fb"
[     6.135] (II) LoadModule: "fb"
[     6.135] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.136] (II) Module fb: vendor="X.Org Foundation"
[     6.136]  compiled for 1.20.8, module version = 1.0.0
[     6.136]  ABI class: X.Org ANSI C Emulation, version 0.4
[     6.136] (II) Loading sub module "dri2"
[     6.136] (II) LoadModule: "dri2"
[     6.136] (II) Module "dri2" already built-in
[     6.282] (II) Loading sub module "glamoregl"
[     6.282] (II) LoadModule: "glamoregl"
[     6.282] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.288] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.288]  compiled for 1.20.8, module version = 1.0.1
[     6.288]  ABI class: X.Org ANSI C Emulation, version 0.4
[     6.312] (II) AMDGPU(0): glamor X acceleration enabled on AMD RENOIR (DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1)
[     6.312] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[     6.312] (==) AMDGPU(0): TearFree property default: auto
[     6.312] (==) AMDGPU(0): VariableRefresh: disabled
[     6.312] (II) AMDGPU(0): KMS Pageflipping: enabled
[     6.312] (II) AMDGPU(0): Output eDP has no monitor section
[     6.315] (II) AMDGPU(0): EDID for output eDP
[     6.315] (II) AMDGPU(0): Manufacturer: AUO  Model: 978f  Serial#: 0
[     6.315] (II) AMDGPU(0): Year: 2020  Week: 3
[     6.315] (II) AMDGPU(0): EDID Version: 1.4
[     6.315] (II) AMDGPU(0): Digital Display Input
[     6.315] (II) AMDGPU(0): 8 bits per channel
[     6.315] (II) AMDGPU(0): Digital interface is DisplayPort
[     6.315] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 38  vert.: 22
[     6.315] (II) AMDGPU(0): Gamma: 2.20
[     6.315] (II) AMDGPU(0): No DPMS capabilities specified
[     6.315] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[     6.315] (II) AMDGPU(0): First detailed timing is preferred mode
[     6.315] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[     6.315] (II) AMDGPU(0): Display is continuous-frequency
[     6.315] (II) AMDGPU(0): redX: 0.575 redY: 0.347   greenX: 0.352 greenY: 0.578
[     6.315] (II) AMDGPU(0): blueX: 0.161 blueY: 0.128   whiteX: 0.313 whiteY: 0.329
[     6.315] (II) AMDGPU(0): Manufacturer's mask: 0
[     6.315] (II) AMDGPU(0): Supported detailed timing:
[     6.315] (II) AMDGPU(0): clock: 368.1 MHz   Image Size:  382 x 215 mm
[     6.315] (II) AMDGPU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2102 h_border: 0
[     6.315] (II) AMDGPU(0): v_active: 1080  v_sync: 1090  v_sync_end 1095 v_blanking: 1216 v_border: 0
[     6.315] (II) AMDGPU(0): Supported detailed timing:
[     6.315] (II) AMDGPU(0): clock: 153.4 MHz   Image Size:  382 x 215 mm
[     6.315] (II) AMDGPU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2102 h_border: 0
[     6.315] (II) AMDGPU(0): v_active: 1080  v_sync: 1090  v_sync_end 1095 v_blanking: 1216 v_border: 0
[     6.315] (II) AMDGPU(0): Ranges: V min: 60 V max: 144 Hz, H min: 176 H max: 176 kHz, PixClock max 375 MHz
[     6.315] (II) AMDGPU(0):  B173HAN04.9
[     6.315] (II) AMDGPU(0): EDID (in hex):
[     6.315] (II) AMDGPU(0):  00ffffffffffff0006af8f9700000000
[     6.315] (II) AMDGPU(0):  031e0104a526167803707593585a9429
[     6.315] (II) AMDGPU(0):  20505400000001010101010101010101
[     6.315] (II) AMDGPU(0):  010101010101ce8f80b6703888403020
[     6.315] (II) AMDGPU(0):  a5007ed710000018ec3b80b670388840
[     6.315] (II) AMDGPU(0):  3020a5007ed710000018000000fd003c
[     6.315] (II) AMDGPU(0):  90b0b025010a202020202020000000fe
[     6.315] (II) AMDGPU(0):  004231373348414e30342e39200a007a
[     6.315] (II) AMDGPU(0): Printing probed modes for output eDP
[     6.315] (II) AMDGPU(0): Modeline "1920x1080"x144.0  368.14  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (175.1 kHz eP)
[     6.315] (II) AMDGPU(0): Modeline "1920x1080"x60.0  153.40  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (73.0 kHz e)
[     6.315] (II) AMDGPU(0): Modeline "1680x1050"x144.0  368.14  1680 1968 2000 2102  1050 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     6.315] (II) AMDGPU(0): Modeline "1280x1024"x144.0  368.14  1280 1968 2000 2102  1024 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     6.315] (II) AMDGPU(0): Modeline "1440x900"x144.0  368.14  1440 1968 2000 2102  900 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     6.315] (II) AMDGPU(0): Modeline "1280x800"x144.0  368.14  1280 1968 2000 2102  800 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     6.315] (II) AMDGPU(0): Modeline "1280x720"x144.0  368.14  1280 1968 2000 2102  720 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     6.315] (II) AMDGPU(0): Modeline "1024x768"x144.0  368.14  1024 1968 2000 2102  768 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     6.315] (II) AMDGPU(0): Modeline "800x600"x144.0  368.14  800 1968 2000 2102  600 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     6.315] (II) AMDGPU(0): Modeline "640x480"x144.0  368.14  640 1968 2000 2102  480 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     6.315] (II) AMDGPU(0): Output eDP connected
[     6.315] (II) AMDGPU(0): Using exact sizes for initial modes
[     6.315] (II) AMDGPU(0): Output eDP using initial mode 1920x1080 +0+0
[     6.315] (II) AMDGPU(0): mem size init: gart size :bf6b3000 vram size: s:1e397000 visible:1e397000
[     6.315] (==) AMDGPU(0): DPI set to (96, 96)
[     6.315] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.315] (II) Loading sub module "ramdac"
[     6.315] (II) LoadModule: "ramdac"
[     6.315] (II) Module "ramdac" already built-in
[     6.315] (==) AMDGPU(G0): Depth 24, (--) framebuffer bpp 32
[     6.315] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     6.315] (==) AMDGPU(G0): Default visual is TrueColor
[     6.315] (==) AMDGPU(G0): RGB weight 888
[     6.315] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC)
[     6.315] (--) AMDGPU(G0): Chipset: "Radeon RX 5500M" (ChipID = 0x7340)
[     6.315] (II) Loading sub module "fb"
[     6.315] (II) LoadModule: "fb"
[     6.315] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.315] (II) Module fb: vendor="X.Org Foundation"
[     6.315]  compiled for 1.20.8, module version = 1.0.0
[     6.315]  ABI class: X.Org ANSI C Emulation, version 0.4
[     6.315] (II) Loading sub module "dri2"
[     6.315] (II) LoadModule: "dri2"
[     6.315] (II) Module "dri2" already built-in
[     6.323] (II) Loading sub module "glamoregl"
[     6.323] (II) LoadModule: "glamoregl"
[     6.323] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.323] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.323]  compiled for 1.20.8, module version = 1.0.1
[     6.323]  ABI class: X.Org ANSI C Emulation, version 0.4
[     6.328] (II) AMDGPU(G0): glamor X acceleration enabled on Radeon RX 5500M (NAVI14, DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1)
[     6.328] (II) AMDGPU(G0): glamor detected, initialising EGL layer.
[     6.328] (==) AMDGPU(G0): TearFree property default: auto
[     6.328] (II) AMDGPU(G0): Output HDMI-A-1-0 has no monitor section
[     6.331] (II) AMDGPU(G0): EDID for output HDMI-A-1-0
[     6.331] (II) AMDGPU(G0): Manufacturer: IVM  Model: 560a  Serial#: 10004
[     6.331] (II) AMDGPU(G0): Year: 2011  Week: 34
[     6.331] (II) AMDGPU(G0): EDID Version: 1.3
[     6.331] (II) AMDGPU(G0): Digital Display Input
[     6.331] (II) AMDGPU(G0): Max Image Size [cm]: horiz.: 48  vert.: 27
[     6.331] (II) AMDGPU(G0): Gamma: 2.20
[     6.331] (II) AMDGPU(G0): DPMS capabilities: Off
[     6.331] (II) AMDGPU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[     6.331] (II) AMDGPU(G0): Default color space is primary color space
[     6.331] (II) AMDGPU(G0): First detailed timing is preferred mode
[     6.331] (II) AMDGPU(G0): redX: 0.648 redY: 0.339   greenX: 0.282 greenY: 0.603
[     6.331] (II) AMDGPU(G0): blueX: 0.143 blueY: 0.070   whiteX: 0.312 whiteY: 0.329
[     6.331] (II) AMDGPU(G0): Supported established timings:
[     6.331] (II) AMDGPU(G0): 720x400@70Hz
[     6.331] (II) AMDGPU(G0): 640x480@60Hz
[     6.331] (II) AMDGPU(G0): 640x480@67Hz
[     6.331] (II) AMDGPU(G0): 640x480@72Hz
[     6.331] (II) AMDGPU(G0): 640x480@75Hz
[     6.331] (II) AMDGPU(G0): 800x600@56Hz
[     6.331] (II) AMDGPU(G0): 800x600@60Hz
[     6.331] (II) AMDGPU(G0): 800x600@72Hz
[     6.331] (II) AMDGPU(G0): 800x600@75Hz
[     6.331] (II) AMDGPU(G0): 832x624@75Hz
[     6.331] (II) AMDGPU(G0): 1024x768@60Hz
[     6.331] (II) AMDGPU(G0): 1024x768@70Hz
[     6.331] (II) AMDGPU(G0): 1024x768@75Hz
[     6.331] (II) AMDGPU(G0): 1280x1024@75Hz
[     6.331] (II) AMDGPU(G0): 1152x864@75Hz
[     6.331] (II) AMDGPU(G0): Manufacturer's mask: 0
[     6.331] (II) AMDGPU(G0): Supported standard timings:
[     6.331] (II) AMDGPU(G0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     6.331] (II) AMDGPU(G0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     6.331] (II) AMDGPU(G0): #2: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[     6.331] (II) AMDGPU(G0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     6.331] (II) AMDGPU(G0): #4: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[     6.331] (II) AMDGPU(G0): #5: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[     6.331] (II) AMDGPU(G0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[     6.331] (II) AMDGPU(G0): Supported detailed timing:
[     6.331] (II) AMDGPU(G0): clock: 148.5 MHz   Image Size:  477 x 268 mm
[     6.331] (II) AMDGPU(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     6.331] (II) AMDGPU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     6.331] (II) AMDGPU(G0): Serial No: 1102813410004
[     6.331] (II) AMDGPU(G0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 84 kHz, PixClock max 175 MHz
[     6.331] (II) AMDGPU(G0): Monitor name: PLE2208HDS
[     6.331] (II) AMDGPU(G0): Supported detailed timing:
[     6.331] (II) AMDGPU(G0): clock: 27.0 MHz   Image Size:  160 x 90 mm
[     6.331] (II) AMDGPU(G0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[     6.331] (II) AMDGPU(G0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[     6.331] (II) AMDGPU(G0): Number of EDID sections to follow: 1
[     6.331] (II) AMDGPU(G0): EDID (in hex):
[     6.331] (II) AMDGPU(G0):   00ffffffffffff0026cd0a5614270000
[     6.331] (II) AMDGPU(G0):   2215010380301b782e3581a656489a24
[     6.331] (II) AMDGPU(G0):   125054bfef80714f8180818f9500950f
[     6.331] (II) AMDGPU(G0):   a940b3000101023a801871382d40582c
[     6.331] (II) AMDGPU(G0):   4500dd0c1100001e000000ff00313130
[     6.331] (II) AMDGPU(G0):   32383133343130303034000000fd0037
[     6.331] (II) AMDGPU(G0):   4c1e5411000a202020202020000000fc
[     6.331] (II) AMDGPU(G0):   00504c45323230384844530a20200195
[     6.331] (II) AMDGPU(G0):   02031b71230907078301000067030c00
[     6.331] (II) AMDGPU(G0):   2000802d43100403e2000f8c0ad08a20
[     6.331] (II) AMDGPU(G0):   e02d10103e9600a05a00000000000000
[     6.331] (II) AMDGPU(G0):   00000000000000000000000000000000
[     6.331] (II) AMDGPU(G0):   00000000000000000000000000000000
[     6.331] (II) AMDGPU(G0):   00000000000000000000000000000000
[     6.331] (II) AMDGPU(G0):   00000000000000000000000000000000
[     6.331] (II) AMDGPU(G0):   00000000000000000000000000000018
[     6.332] (--) AMDGPU(G0): HDMI max TMDS frequency 225000KHz
[     6.332] (II) AMDGPU(G0): Printing probed modes for output HDMI-A-1-0
[     6.332] (II) AMDGPU(G0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     6.332] (II) AMDGPU(G0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1280x800"x60.0  148.50  1280 2008 2052 2200  800 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     6.332] (II) AMDGPU(G0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     6.332] (II) AMDGPU(G0): mem size init: gart size :fe5be000 vram size: s:fd93d000 visible:f64b000
[     6.332] (==) AMDGPU(G0): DPI set to (96, 96)
[     6.332] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0)
[     6.332] (II) Loading sub module "ramdac"
[     6.332] (II) LoadModule: "ramdac"
[     6.332] (II) Module "ramdac" already built-in
[     6.332] (II) UnloadModule: "radeon"
[     6.332] (II) Unloading radeon
[     6.332] (II) UnloadModule: "modesetting"
[     6.332] (II) Unloading modesetting
[     6.332] (II) UnloadModule: "fbdev"
[     6.332] (II) Unloading fbdev
[     6.332] (II) UnloadSubModule: "fbdevhw"
[     6.332] (II) Unloading fbdevhw
[     6.332] (II) UnloadModule: "vesa"
[     6.332] (II) Unloading vesa
[     6.333] (II) AMDGPU(0): [DRI2] Setup complete
[     6.333] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     6.333] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[     6.408] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[     6.409] (II) AMDGPU(0): SYNC extension fences enabled
[     6.409] (II) AMDGPU(0): Present extension enabled
[     6.409] (==) AMDGPU(0): DRI3 enabled
[     6.409] (==) AMDGPU(0): Backing store enabled
[     6.409] (II) AMDGPU(0): Direct rendering enabled
[     6.422] (II) AMDGPU(0): Use GLAMOR acceleration.
[     6.422] (II) AMDGPU(0): Acceleration enabled
[     6.422] (==) AMDGPU(0): DPMS enabled
[     6.422] (==) AMDGPU(0): Silken mouse enabled
[     6.422] (II) AMDGPU(0): Set up textured video (glamor)
[     6.427] (II) AMDGPU(G0): [DRI2] Setup complete
[     6.427] (II) AMDGPU(G0): [DRI2]   DRI driver: radeonsi
[     6.427] (II) AMDGPU(G0): [DRI2]   VDPAU driver: radeonsi
[     6.442] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[     6.442] (==) AMDGPU(G0): Backing store enabled
[     6.442] (II) AMDGPU(G0): Direct rendering enabled
[     6.447] (II) AMDGPU(G0): Use GLAMOR acceleration.
[     6.447] (II) AMDGPU(G0): Acceleration enabled
[     6.447] (==) AMDGPU(G0): DPMS enabled
[     6.447] (==) AMDGPU(G0): Silken mouse enabled
[     6.466] (II) Initializing extension Generic Event Extension
[     6.466] (II) Initializing extension SHAPE
[     6.466] (II) Initializing extension MIT-SHM
[     6.466] (II) Initializing extension XInputExtension
[     6.467] (II) Initializing extension XTEST
[     6.467] (II) Initializing extension BIG-REQUESTS
[     6.467] (II) Initializing extension SYNC
[     6.467] (II) Initializing extension XKEYBOARD
[     6.468] (II) Initializing extension XC-MISC
[     6.468] (II) Initializing extension SECURITY
[     6.468] (II) Initializing extension XFIXES
[     6.468] (II) Initializing extension RENDER
[     6.468] (II) Initializing extension RANDR
[     6.468] (II) Initializing extension COMPOSITE
[     6.469] (II) Initializing extension DAMAGE
[     6.469] (II) Initializing extension MIT-SCREEN-SAVER
[     6.469] (II) Initializing extension DOUBLE-BUFFER
[     6.469] (II) Initializing extension RECORD
[     6.469] (II) Initializing extension DPMS
[     6.469] (II) Initializing extension Present
[     6.469] (II) Initializing extension DRI3
[     6.470] (II) Initializing extension X-Resource
[     6.470] (II) Initializing extension XVideo
[     6.470] (II) Initializing extension XVideo-MotionCompensation
[     6.470] (II) Initializing extension SELinux
[     6.470] (II) SELinux: Disabled on system
[     6.470] (II) Initializing extension GLX
[     6.478] (II) AIGLX: Loaded and initialized radeonsi
[     6.478] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.478] (II) Initializing extension XFree86-VidModeExtension
[     6.478] (II) Initializing extension XFree86-DGA
[     6.479] (II) Initializing extension XFree86-DRI
[     6.479] (II) Initializing extension DRI2
[     6.502] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[     6.583] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[     6.583] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.583] (II) LoadModule: "libinput"
[     6.583] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.585] (II) Module libinput: vendor="X.Org Foundation"
[     6.585]  compiled for 1.20.8, module version = 0.30.0
[     6.585]  Module class: X.Org XInput Driver
[     6.585]  ABI class: X.Org XInput driver, version 24.1
[     6.585] (II) Using input driver 'libinput' for 'Power Button'
[     6.585] (**) Power Button: always reports core events
[     6.585] (**) Option "Device" "/dev/input/event5"
[     6.585] (**) Option "_source" "server/udev"
[     6.588] (II) event5  - Power Button: is tagged by udev as: Keyboard
[     6.588] (II) event5  - Power Button: device is a keyboard
[     6.588] (II) event5  - Power Button: device removed
[     6.612] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[     6.612] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.612] (**) Option "xkb_model" "pc105"
[     6.612] (**) Option "xkb_layout" "fr"
[     6.612] (**) Option "xkb_variant" "latin9"
[     6.638] (II) event5  - Power Button: is tagged by udev as: Keyboard
[     6.638] (II) event5  - Power Button: device is a keyboard
[     6.638] (II) config/udev: Adding input device Video Bus (/dev/input/event1)
[     6.639] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.639] (II) Using input driver 'libinput' for 'Video Bus'
[     6.639] (**) Video Bus: always reports core events
[     6.639] (**) Option "Device" "/dev/input/event1"
[     6.639] (**) Option "_source" "server/udev"
[     6.640] (II) event1  - Video Bus: is tagged by udev as: Keyboard
[     6.640] (II) event1  - Video Bus: device is a keyboard
[     6.640] (II) event1  - Video Bus: device removed
[     6.708] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input2/event1"
[     6.708] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.708] (**) Option "xkb_model" "pc105"
[     6.708] (**) Option "xkb_layout" "fr"
[     6.708] (**) Option "xkb_variant" "latin9"
[     6.710] (II) event1  - Video Bus: is tagged by udev as: Keyboard
[     6.711] (II) event1  - Video Bus: device is a keyboard
[     6.712] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     6.712] (II) No input driver specified, ignoring this device.
[     6.712] (II) This device may have been added with another device file.
[     6.712] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     6.712] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.712] (II) Using input driver 'libinput' for 'Power Button'
[     6.712] (**) Power Button: always reports core events
[     6.712] (**) Option "Device" "/dev/input/event3"
[     6.712] (**) Option "_source" "server/udev"
[     6.713] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.714] (II) event3  - Power Button: device is a keyboard
[     6.714] (II) event3  - Power Button: device removed
[     6.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[     6.740] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     6.740] (**) Option "xkb_model" "pc105"
[     6.740] (**) Option "xkb_layout" "fr"
[     6.740] (**) Option "xkb_variant" "latin9"
[     6.742] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.742] (II) event3  - Power Button: device is a keyboard
[     6.743] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[     6.743] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.743] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.743] (**) Sleep Button: always reports core events
[     6.743] (**) Option "Device" "/dev/input/event4"
[     6.743] (**) Option "_source" "server/udev"
[     6.744] (II) event4  - Sleep Button: is tagged by udev as: Keyboard
[     6.744] (II) event4  - Sleep Button: device is a keyboard
[     6.744] (II) event4  - Sleep Button: device removed
[     6.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event4"
[     6.772] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.772] (**) Option "xkb_model" "pc105"
[     6.772] (**) Option "xkb_layout" "fr"
[     6.772] (**) Option "xkb_variant" "latin9"
[     6.774] (II) event4  - Sleep Button: is tagged by udev as: Keyboard
[     6.774] (II) event4  - Sleep Button: device is a keyboard
[     6.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[     6.775] (II) No input driver specified, ignoring this device.
[     6.775] (II) This device may have been added with another device file.
[     6.777] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse (/dev/input/event13)
[     6.777] (**) COOLER MASTER CM110 Gaming Mouse: Applying InputClass "libinput pointer catchall"
[     6.777] (II) Using input driver 'libinput' for 'COOLER MASTER CM110 Gaming Mouse'
[     6.777] (**) COOLER MASTER CM110 Gaming Mouse: always reports core events
[     6.777] (**) Option "Device" "/dev/input/event13"
[     6.777] (**) Option "_source" "server/udev"
[     6.839] (II) event13 - COOLER MASTER CM110 Gaming Mouse: is tagged by udev as: Mouse
[     6.839] (II) event13 - COOLER MASTER CM110 Gaming Mouse: device is a pointer
[     6.839] (II) event13 - COOLER MASTER CM110 Gaming Mouse: device removed
[     6.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.0/0003:2516:0119.0001/input/input14/event13"
[     6.877] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse" (type: MOUSE, id 10)
[     6.877] (**) Option "AccelerationScheme" "none"
[     6.877] (**) COOLER MASTER CM110 Gaming Mouse: (accel) selected scheme none/0
[     6.877] (**) COOLER MASTER CM110 Gaming Mouse: (accel) acceleration factor: 2.000
[     6.877] (**) COOLER MASTER CM110 Gaming Mouse: (accel) acceleration threshold: 4
[     6.939] (II) event13 - COOLER MASTER CM110 Gaming Mouse: is tagged by udev as: Mouse
[     6.939] (II) event13 - COOLER MASTER CM110 Gaming Mouse: device is a pointer
[     6.941] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse (/dev/input/mouse1)
[     6.941] (II) No input driver specified, ignoring this device.
[     6.941] (II) This device may have been added with another device file.
[     6.942] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse Keyboard (/dev/input/event14)
[     6.942] (**) COOLER MASTER CM110 Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[     6.942] (II) Using input driver 'libinput' for 'COOLER MASTER CM110 Gaming Mouse Keyboard'
[     6.942] (**) COOLER MASTER CM110 Gaming Mouse Keyboard: always reports core events
[     6.942] (**) Option "Device" "/dev/input/event14"
[     6.942] (**) Option "_source" "server/udev"
[     6.944] (II) event14 - COOLER MASTER CM110 Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[     6.944] (II) event14 - COOLER MASTER CM110 Gaming Mouse Keyboard: device is a keyboard
[     6.944] (II) event14 - COOLER MASTER CM110 Gaming Mouse Keyboard: device removed
[     6.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:2516:0119.0002/input/input15/event14"
[     6.961] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse Keyboard" (type: KEYBOARD, id 11)
[     6.961] (**) Option "xkb_model" "pc105"
[     6.961] (**) Option "xkb_layout" "fr"
[     6.961] (**) Option "xkb_variant" "latin9"
[     6.963] (II) event14 - COOLER MASTER CM110 Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[     6.964] (II) event14 - COOLER MASTER CM110 Gaming Mouse Keyboard: device is a keyboard
[     6.965] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse System Control (/dev/input/event15)
[     6.965] (**) COOLER MASTER CM110 Gaming Mouse System Control: Applying InputClass "libinput keyboard catchall"
[     6.965] (II) Using input driver 'libinput' for 'COOLER MASTER CM110 Gaming Mouse System Control'
[     6.965] (**) COOLER MASTER CM110 Gaming Mouse System Control: always reports core events
[     6.965] (**) Option "Device" "/dev/input/event15"
[     6.965] (**) Option "_source" "server/udev"
[     6.967] (II) event15 - COOLER MASTER CM110 Gaming Mouse System Control: is tagged by udev as: Keyboard
[     6.967] (II) event15 - COOLER MASTER CM110 Gaming Mouse System Control: device is a keyboard
[     6.968] (II) event15 - COOLER MASTER CM110 Gaming Mouse System Control: device removed
[     6.984] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:2516:0119.0002/input/input16/event15"
[     6.985] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse System Control" (type: KEYBOARD, id 12)
[     6.985] (**) Option "xkb_model" "pc105"
[     6.985] (**) Option "xkb_layout" "fr"
[     6.985] (**) Option "xkb_variant" "latin9"
[     6.987] (II) event15 - COOLER MASTER CM110 Gaming Mouse System Control: is tagged by udev as: Keyboard
[     6.987] (II) event15 - COOLER MASTER CM110 Gaming Mouse System Control: device is a keyboard
[     6.989] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse Consumer Control (/dev/input/event16)
[     6.989] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.989] (II) Using input driver 'libinput' for 'COOLER MASTER CM110 Gaming Mouse Consumer Control'
[     6.989] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: always reports core events
[     6.989] (**) Option "Device" "/dev/input/event16"
[     6.989] (**) Option "_source" "server/udev"
[     6.991] (II) event16 - COOLER MASTER CM110 Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[     6.991] (II) event16 - COOLER MASTER CM110 Gaming Mouse Consumer Control: device is a keyboard
[     6.991] (II) event16 - COOLER MASTER CM110 Gaming Mouse Consumer Control: device removed
[     7.004] (II) libinput: COOLER MASTER CM110 Gaming Mouse Consumer Control: needs a virtual subdevice
[     7.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:2516:0119.0002/input/input17/event16"
[     7.005] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse Consumer Control" (type: MOUSE, id 13)
[     7.005] (**) Option "AccelerationScheme" "none"
[     7.005] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: (accel) selected scheme none/0
[     7.005] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: (accel) acceleration factor: 2.000
[     7.005] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: (accel) acceleration threshold: 4
[     7.007] (II) event16 - COOLER MASTER CM110 Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[     7.007] (II) event16 - COOLER MASTER CM110 Gaming Mouse Consumer Control: device is a keyboard
[     7.008] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse (/dev/input/event17)
[     7.008] (II) No input driver specified, ignoring this device.
[     7.008] (II) This device may have been added with another device file.
[     7.009] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event10)
[     7.009] (II) No input driver specified, ignoring this device.
[     7.009] (II) This device may have been added with another device file.
[     7.009] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event11)
[     7.009] (II) No input driver specified, ignoring this device.
[     7.009] (II) This device may have been added with another device file.
[     7.010] (II) config/udev: Adding input device gpio-keys (/dev/input/event12)
[     7.010] (II) No input driver specified, ignoring this device.
[     7.010] (II) This device may have been added with another device file.
[     7.011] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     7.011] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     7.011] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     7.011] (**) AT Translated Set 2 keyboard: always reports core events
[     7.011] (**) Option "Device" "/dev/input/event0"
[     7.011] (**) Option "_source" "server/udev"
[     7.012] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.012] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     7.014] (II) event0  - AT Translated Set 2 keyboard: device removed
[     7.029] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     7.029] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[     7.029] (**) Option "xkb_model" "pc105"
[     7.029] (**) Option "xkb_layout" "fr"
[     7.029] (**) Option "xkb_variant" "latin9"
[     7.031] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.031] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     7.033] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[     7.033] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     7.033] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[     7.033] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     7.033] (**) Option "Device" "/dev/input/event8"
[     7.033] (**) Option "_source" "server/udev"
[     7.035] (II) event8  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     7.035] (II) event8  - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     7.037] (II) event8  - SynPS/2 Synaptics TouchPad: device is a touchpad
[     7.037] (II) event8  - SynPS/2 Synaptics TouchPad: device removed
[     7.073] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event8"
[     7.073] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[     7.075] (**) Option "AccelerationScheme" "none"
[     7.075] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[     7.075] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     7.075] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     7.076] (II) event8  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     7.077] (II) event8  - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     7.079] (II) event8  - SynPS/2 Synaptics TouchPad: device is a touchpad
[     7.080] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     7.080] (II) No input driver specified, ignoring this device.
[     7.080] (II) This device may have been added with another device file.
[     7.081] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     7.081] (II) No input driver specified, ignoring this device.
[     7.081] (II) This device may have been added with another device file.
[     7.081] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event7)
[     7.081] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     7.081] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[     7.081] (**) MSI WMI hotkeys: always reports core events
[     7.081] (**) Option "Device" "/dev/input/event7"
[     7.081] (**) Option "_source" "server/udev"
[     7.082] (II) event7  - MSI WMI hotkeys: is tagged by udev as: Keyboard
[     7.083] (II) event7  - MSI WMI hotkeys: device is a keyboard
[     7.083] (II) event7  - MSI WMI hotkeys: device removed
[     7.124] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event7"
[     7.124] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 16)
[     7.124] (**) Option "xkb_model" "pc105"
[     7.124] (**) Option "xkb_layout" "fr"
[     7.124] (**) Option "xkb_variant" "latin9"
[     7.126] (II) event7  - MSI WMI hotkeys: is tagged by udev as: Keyboard
[     7.126] (II) event7  - MSI WMI hotkeys: device is a keyboard
[     7.131] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[     7.131] (II) Using input driver 'libinput' for 'COOLER MASTER CM110 Gaming Mouse Consumer Control'
[     7.131] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: always reports core events
[     7.131] (**) Option "Device" "/dev/input/event16"
[     7.131] (**) Option "_source" "_driver/libinput"
[     7.132] (II) libinput: COOLER MASTER CM110 Gaming Mouse Consumer Control: is a virtual subdevice
[     7.132] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:2516:0119.0002/input/input17/event16"
[     7.132] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse Consumer Control" (type: KEYBOARD, id 17)
[     7.132] (**) Option "xkb_model" "pc105"
[     7.132] (**) Option "xkb_layout" "fr"
[     7.132] (**) Option "xkb_variant" "latin9"
[     7.137] (EE) Failed to open authorization file "/var/run/sddm/{6b6f0952-ccd6-4933-8a25-c2f786c9895c}": No such file or directory
[     8.280] (II) AMDGPU(0): EDID vendor "AUO", prod id 38799
[     8.280] (II) AMDGPU(0): Using EDID range info for horizontal sync
[     8.280] (II) AMDGPU(0): Using EDID range info for vertical refresh
[     8.280] (II) AMDGPU(0): Printing DDC gathered Modelines:
[     8.280] (II) AMDGPU(0): Modeline "1920x1080"x0.0  368.14  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (175.1 kHz eP)
[     8.280] (II) AMDGPU(0): Modeline "1920x1080"x0.0  153.40  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (73.0 kHz e)
[     8.381] (II) AMDGPU(0): EDID vendor "AUO", prod id 38799
[     8.381] (II) AMDGPU(0): Using hsync ranges from config file
[     8.381] (II) AMDGPU(0): Using vrefresh ranges from config file
[     8.381] (II) AMDGPU(0): Printing DDC gathered Modelines:
[     8.381] (II) AMDGPU(0): Modeline "1920x1080"x0.0  368.14  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (175.1 kHz eP)
[     8.381] (II) AMDGPU(0): Modeline "1920x1080"x0.0  153.40  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (73.0 kHz e)
 

Hors ligne

#9 15-10-2020 06:11:25

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

parfait tu a trouvé le bon a la date d'aujourd'hui


[     5.977] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 15 06:09:25 2020
 


je regarde .......

au niveau matériel bien deux choses pour le gpu


[     6.007] (--) PCI: (3@0:0:0) 1002:7340:1462:12ac rev 193, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfe500000/524288, BIOS @ 0x????????/131072
[     6.007] (--) PCI:*(7@0:0:0) 1002:1636:1462:12ac rev 199, Mem @ 0xb0000000/268435456, 0xc0000000/2097152, 0xfe400000/524288, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
 


tu a la même chose que moi avec le raven 2200G (apu)


[     6.135] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x1636)
 


inconnu mais normalement pas grave , mais ça me fait penser que ton processeur a un gpu intégré

Dernière modification par robert2a (15-10-2020 06:16:49)

Hors ligne

#10 15-10-2020 06:13:30

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Il y a également un Xorg.1.log

[  1805.122] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[  1805.122] _XSERVTransMakeAllCOTSServerListeners: server already running
[  1805.122] (--) Log file renamed from "/var/log/Xorg.pid-10961.log" to "/var/log/Xorg.1.log"
[  1805.123]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[  1805.123] Build Operating System: Linux 4.19.0-8-amd64 x86_64 Debian
[  1805.123] Current Operating System: Linux debian-msi 5.8.0-2-amd64 #1 SMP Debian 5.8.10-1 (2020-09-19) x86_64
[  1805.123] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-2-amd64 root=UUID=077fd9c7-aadd-4e6e-a778-5a296906af4b ro vga=normal quiet
[  1805.123] Build Date: 31 March 2020  10:14:40AM
[  1805.123] xorg-server 2:1.20.8-2 (https://www.debian.org/support)
[  1805.123] Current version of pixman: 0.36.0
[  1805.123]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[  1805.123] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1805.123] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Oct 14 15:39:14 2020
[  1805.124] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1805.124] (==) No Layout section.  Using the first Screen section.
[  1805.124] (==) No screen section available. Using defaults.
[  1805.124] (**) |-->Screen "Default Screen Section" (0)
[  1805.124] (**) |   |-->Monitor "<default monitor>"
[  1805.124] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[  1805.124] (==) Automatically adding devices
[  1805.124] (==) Automatically enabling devices
[  1805.124] (==) Automatically adding GPU devices
[  1805.124] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1805.124] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1805.124]  Entry deleted from font path.
[  1805.124] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[  1805.124] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1805.124] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1805.124] (II) Loader magic: 0x55b41de10e20
[  1805.124] (II) Module ABI versions:
[  1805.125]  X.Org ANSI C Emulation: 0.4
[  1805.125]  X.Org Video Driver: 24.1
[  1805.125]  X.Org XInput driver : 24.1
[  1805.125]  X.Org Server Extension : 10.0
[  1805.126] (++) using VT number 7

[  1805.126] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  1805.126] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1805.126] (II) xfree86: Adding drm device (/dev/dri/card1)
[  1805.126] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
 



La machine démarre bien jusqu'au bureau.
Par contre lors de la fermeture du clapet (écran) il n'y a pas moyen de le mettre en veille. A la ré-ouverture tout reste figé, ventilo tournant mais aucune touche active.

Et lorsque je lui demande un redémarrage, il affiche une série de log et puis reste figé écran noir avec un curseur en haut (sans clignotement)
Lorsque je tente un tty (ctrl + alt + F1 ou F2) il y a un plantage royal.

Dernière modification par ludopika (15-10-2020 06:27:19)

Hors ligne

#11 15-10-2020 06:19:45

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

le Xorg.1.log c'est l'ancien (il en garde deux) voir la date du log
la 5500 est bien reconnu


[     6.328] (II) AMDGPU(G0): glamor X acceleration enabled on Radeon RX 5500M (NAVI14, DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1)
 



ici tu vois que deux matériel graphique


[     6.333] (II) AMDGPU(0): [DRI2] Setup complete
[     6.333] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     6.333] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[     6.408] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[     6.409] (II) AMDGPU(0): SYNC extension fences enabled
[     6.409] (II) AMDGPU(0): Present extension enabled
[     6.409] (==) AMDGPU(0): DRI3 enabled
[     6.409] (==) AMDGPU(0): Backing store enabled
[     6.409] (II) AMDGPU(0): Direct rendering enabled
[     6.422] (II) AMDGPU(0): Use GLAMOR acceleration.
[     6.422] (II) AMDGPU(0): Acceleration enabled
[     6.422] (==) AMDGPU(0): DPMS enabled
[     6.422] (==) AMDGPU(0): Silken mouse enabled
[     6.422] (II) AMDGPU(0): Set up textured video (glamor)
[     6.427] (II) AMDGPU(G0): [DRI2] Setup complete
[     6.427] (II) AMDGPU(G0): [DRI2]   DRI driver: radeonsi
[     6.427] (II) AMDGPU(G0): [DRI2]   VDPAU driver: radeonsi
[     6.442] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[     6.442] (==) AMDGPU(G0): Backing store enabled
[     6.442] (II) AMDGPU(G0): Direct rendering enabled
[     6.447] (II) AMDGPU(G0): Use GLAMOR acceleration.
[     6.447] (II) AMDGPU(G0): Acceleration enabled
[     6.447] (==) AMDGPU(G0): DPMS enabled
[     6.447] (==) AMDGPU(G0): Silken mouse enabled
[     6.466] (II) Initializing extension Generic Event Extension
[     6.466] (II) Initializing extension SHAPE
[     6.466] (II) Initializing extension MIT-SHM
[     6.466] (II) Initializing extension XInputExtension
[     6.467] (II) Initializing extension XTEST
[     6.467] (II) Initializing extension BIG-REQUESTS
[     6.467] (II) Initializing extension SYNC
[     6.467] (II) Initializing extension XKEYBOARD
[     6.468] (II) Initializing extension XC-MISC
[     6.468] (II) Initializing extension SECURITY
[     6.468] (II) Initializing extension XFIXES
[     6.468] (II) Initializing extension RENDER
[     6.468] (II) Initializing extension RANDR
[     6.468] (II) Initializing extension COMPOSITE
[     6.469] (II) Initializing extension DAMAGE
[     6.469] (II) Initializing extension MIT-SCREEN-SAVER
[     6.469] (II) Initializing extension DOUBLE-BUFFER
[     6.469] (II) Initializing extension RECORD
[     6.469] (II) Initializing extension DPMS
[     6.469] (II) Initializing extension Present
[     6.469] (II) Initializing extension DRI3
[     6.470] (II) Initializing extension X-Resource
[     6.470] (II) Initializing extension XVideo
[     6.470] (II) Initializing extension XVideo-MotionCompensation
[     6.470] (II) Initializing extension SELinux
[     6.470] (II) SELinux: Disabled on system
[     6.470] (II) Initializing extension GLX
[     6.478] (II) AIGLX: Loaded and initialized radeonsi
[     6.478] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.478] (II) Initializing extension XFree86-VidModeExtension
[     6.478] (II) Initializing extension XFree86-DGA
[     6.479] (II) Initializing extension XFree86-DRI
[     6.479] (II) Initializing extension DRI2
[     6.502] (II) AMDGPU(0): Setting screen physical size to 508 x 285
 



ils sont la


     6.333] (II) AMDGPU(0): [DRI2] Setup complete
[     6.333] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     6.333] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi

et la

[     6.427] (II) AMDGPU(G0): [DRI2] Setup complete
[     6.427] (II) AMDGPU(G0): [DRI2]   DRI driver: radeonsi
[     6.427] (II) AMDGPU(G0): [DRI2]   VDPAU driver: radeonsi
 



pour moi le log est correct , mais aucune idée comment cela fonctionne   hmm

ps: voir mon #9 et #11 pour les commentaires sur le Xorg.0.log

en conclusion tu aurais deux gpu , un renoir dans le cpu (apu) et un discret "5500M"
et peut être un switch entre les deux pour une question d'énergie
mais bon sans certitude , je me trompe peut être  roll

ps: ce qui explique aussi le bug en sortie de veille (écran noir )
voir avec wayland (je n'ai pas les compétences) si le switch ne serait pas possible
tu va devoir arpenter le net pour avoir des infos sur cette machine , a priori bullseye prend bien en charge le matériel
une commande a faire pour les erreurs


journalctl -r -p err
 

Dernière modification par robert2a (15-10-2020 06:39:29)

Hors ligne

#12 15-10-2020 06:34:10

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Patience donc ...
Le docteur Linus Torvald va nous trouver un remède à base kernel nouvelle génération roll

Le "discret" , rx5500M, est censé être le gpu principal ...

Et oui j'ai bien vu tes log, avec les modifications en cours de route ... je suis en nuit blanche mais je garde un oeil ouvert encore tongue

Dernière modification par ludopika (15-10-2020 06:38:21)

Hors ligne

#13 15-10-2020 06:40:35

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

poste les erreurs , la dernière commande de mon #11

pour moi le noyau est suffisant , le matériel bien pris en charge (ainsi que le firmware-amd-graphics).

arrrf nuit blanche tongue

Dernière modification par robert2a (15-10-2020 06:42:40)

Hors ligne

#14 15-10-2020 06:45:55

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Ah voila les dernières que j'arrive à lire mais pas moyen de les retrouver dans un log.
Ta commande les donnes !

root@debian-msi:~# journalctl -r -p err
-- Logs begin at Wed 2020-10-14 04:44:04 CEST, end at Thu 2020-10-15 07:42:49 CEST. --
oct 15 06:09:25 debian-msi systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.
oct 15 06:09:25 debian-msi systemd-backlight[698]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device
oct 15 06:09:24 debian-msi bluetoothd[613]: sap-server: Operation not permitted (1)
oct 15 06:09:24 debian-msi bluetoothd[613]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
oct 15 06:09:24 debian-msi kernel: [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find connector for link!
oct 15 06:09:22 debian-msi kernel: iwlwifi 0000:04:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)
oct 15 06:09:22 debian-msi kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
oct 15 06:09:22 debian-msi kernel: iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-cc-a0-56.ucode (-2)
oct 15 06:09:21 debian-msi kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled
-- Reboot --
oct 15 06:08:36 debian-msi kernel: kernel BUG at mm/slub.c:304!
oct 15 06:08:30 debian-msi kernel: snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535
oct 15 06:08:29 debian-msi kernel: [drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-62).
oct 15 06:08:29 debian-msi kernel: [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <smu> failed -62
oct 15 06:08:29 debian-msi kernel: amdgpu: RunBtc failed!
oct 15 06:08:29 debian-msi kernel: amdgpu: failed send message:     RunBtc (58)         param: 0x00000000 response 0xffffffc2
oct 15 06:08:15 debian-msi systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.
oct 15 06:08:15 debian-msi systemd-backlight[712]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device
oct 15 06:08:14 debian-msi bluetoothd[642]: sap-server: Operation not permitted (1)
oct 15 06:08:14 debian-msi bluetoothd[642]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
oct 15 06:08:14 debian-msi kernel: [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find connector for link!
 



Je viens de tomber sur une page avec une histoire de :
    amdgpu.exp_hw_support=1
    amdgpu.runpm=0
à modifier dans le grub.cfg ... j'aime pas beaucoup tripatouiller la dedans ...


Et ca
runpm (int):
Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality.

exp_hw_support (int):
Enable experimental hw support (1 = enable). The default is 0 (disabled).

Dernière modification par ludopika (15-10-2020 07:18:04)

Hors ligne

#15 15-10-2020 06:54:34

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

tu a deux log le Reboot -- oct 15 06:08:36
et le oct 15 06:09:25

si tu veut un seul a chaque démarrage il faut efface le dossier /var/log/journal et un reboot


rm -R /var/log/journal
 



mais avant il te faut installer un firmware


apt --reinstall install firmware-iwlwifi
 



le plus récent


journalctl -r -p err
-- Logs begin at Wed 2020-10-14 04:44:04 CEST, end at Thu 2020-10-15 07:42:49 CEST. --
oct 15 06:09:25 debian-msi systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.
oct 15 06:09:25 debian-msi systemd-backlight[698]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device
oct 15 06:09:24 debian-msi bluetoothd[613]: sap-server: Operation not permitted (1)
oct 15 06:09:24 debian-msi bluetoothd[613]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
oct 15 06:09:24 debian-msi kernel: [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find connector for link!
oct 15 06:09:22 debian-msi kernel: iwlwifi 0000:04:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)
oct 15 06:09:22 debian-msi kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
oct 15 06:09:22 debian-msi kernel: iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-cc-a0-56.ucode (-2)
oct 15 06:09:21 debian-msi kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled
 



si je décortique en fonction du matériel .
pour la vidéo


oct 15 06:09:25 debian-msi systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.
oct 15 06:09:25 debian-msi systemd-backlight[698]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device
oct 15 06:09:24 debian-msi kernel: [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find connector for link!
 



pour le wifi (résolu avec le firmware )


oct 15 06:09:22 debian-msi kernel: iwlwifi 0000:04:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)
oct 15 06:09:22 debian-msi kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
oct 15 06:09:22 debian-msi kernel: iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-cc-a0-56.ucode (-2)
 



le reste pas important

Dernière modification par robert2a (15-10-2020 07:00:14)

Hors ligne

#16 15-10-2020 06:58:50

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Le paquet firmware-iwlwifi est déja installé, et j'ai rajouté également le firmware-realtek suite aux erreur de missing rtl-8169

root@debian-msi:~# apt --reinstall install firmware-iwlwifi
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'
état... Fait
0 mis à jour, 0 nouvellement installés, 1installés, 0 à enlever et 1 non mis à jour.
Il est nécessaire de prendre 0 o/9.926 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
(Lecture de la base de données... 168135 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../firmware-iwlwifi_20200918-1_all.deb ...
Dépaquetage de firmware-iwlwifi (20200918-1) sur (20200918-1) ...
Paramétrage de firmware-iwlwifi (20200918-1) ...

Hors ligne

#17 15-10-2020 07:07:06

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

tu trouvera ici des spécialistes du wifi et comment le résoudre  smile
ou attendre une mise a jour du firmvare iwlwifi

ps: dans le doute l'option "--reinstall" est pratique wink

pour ton #14 , il semble que ça touche l'autonomie de la batterie
mais la machine est plus stable


Je viens de tomber sur une page web avec une histoire de :
    amdgpu.exp_hw_support=1
    amdgpu.runpm=0
à modifier dans le grub.cfg ... j'aime pas beaucoup tripatouiller la dedans ...
 



sinon pas compliquer a faire


nano /etc/default/grub
 


l'original


# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
 


le modifier


# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="amdgpu.exp_hw_support=1 amdgpu.runpm=0 quiet"
GRUB_CMDLINE_LINUX=""
 



un update


update-grub
 



et reboot
pour revenir en arrière idem

Dernière modification par robert2a (15-10-2020 07:22:34)

Hors ligne

#18 15-10-2020 07:22:16

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Merci quand même, statut quo ...
Je n'ai pas plus avancé, sauf peut-être en #14 avec le grub.cfg
Et ta commande pour retrouver les log erreur je note smile

Je vais creuser chez les anglophones sait-on jamais que les rosbeaf soit en avance lol

Dernière modification par ludopika (15-10-2020 07:23:43)

Hors ligne

#19 15-10-2020 07:23:21

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

voir au dessus mon explication pour grub

tu forcera la 5500 sûrement et la batterie aura une autonomie moindre

Dernière modification par robert2a (15-10-2020 07:26:49)

Hors ligne

#20 15-10-2020 07:55:29

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Comment vérifier que la 5500 est forcé ?

Rien de changé, idem dans :

ludo@debian-msi:~$ glxinfo -B



J'ai vérifé c'est identique à tout à l'heure.

P.S.
Ah bah je me sens moins seul du coup avec cette page !! lol

Je m'auto répond, pour savoir si la 5500 est forcé, il faut :

ludo@debian-msi:~$ DRI_PRIME=1 glxinfo | grep "OpenGL renderer"


Réponse :

OpenGL renderer string: Radeon RX 5500M (NAVI14, DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1)



Donc oui elle est prioritaire, d'ou la commande "DRI_PRIME" (je suppose "driver maitre")

Bon les pistes deviennent un peu plus clair.
2 GPU qui se croisent et une gestion encore incomplète de l'ensemble.

Je continu avec mon masque et mon tuba dans les profondeurs de l'abime ...

Dernière modification par ludopika (15-10-2020 08:20:32)

Hors ligne

#21 15-10-2020 13:45:13

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

un oubli de ma part


DRI_PRIME=1 glxinfo -B
 



te donne le retour de la carte "1"


DRI_PRIME=0 glxinfo -B
 


te donne le retour de la carte "0"

tu veut lancer firefox


DRI_PRIME=1 firefox
 



a toi de voir 0 et 1 a quelle carte vidéo ça correspond
sur le retour de glxinfo -B cette ligne doit être différente


Device: AMD RENOIR (DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1) (0x1636)
 


pour moi c'est l' apu du cpu
pour preuve


À l'occasion du dernier CES, tenu en janvier à Las Vegas,
AMD annonçait toutefois du neuf.
Ses nouveaux processeurs pour ordinateurs portables,
nom de code « Renoir », arboreraient bientôt le design Zen 2 et la gravure en 7 nm.
 


=> https://www.clubic.com/processeur/proce … oyens.html
le second est la 5500M

moi a ta place je teste sur KDE ou Gnome le bureau wayland (sans les options de grub que tu a ajouté ).
et je teste "DRI_PRIME"
ps: il y a un petit paquet a ajouter (si pas déjà installé ) pour faire le switch entre les deux gpu

paquet switcheroo-control


apt policy switcheroo-control
 



switcheroo-control:
  Installé : (aucun)
  Candidat : 2.1-1
 Table de version :
     2.1-1 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages
 



le descriptif


D-Bus service to check the availability of dual-GPU
 
For systems that have both an integrated GPU and a dedicated GPU, this
package by default will force the integrated GPU to be used to save power.

You can launch individual apps using the dedicated GPU by running them
with the environment variable DRI_PRIME=1. Or you can right-click on the
app (while it's not running) in GNOME Shell's Activities Overview
and choose the "Launch using Dedicated Graphics Card" option.

If this default behavior is not appropriate, uninstall this package or
set xdg.force_integrated=0 as a kernel command-line option in your
bootloader.
 



par défaut c'est le renoir qui est actif (faible consommation )
pour tester enlever les options de grub
installer le paquet switcheroo-control
un reboot
tester avec ton bureau actuel
tester avec wayland (qui n'utilise pas le serveur X )

ps: j'ai le souvenir que ça fonctionne bien avec "Gnome + gdm3 + Wayland" comme retour de membre
tu nous dira si correct smile

remarque :
DRI_PRIME   fonctionne sans le paquet donc la première chose a faire vérifier la présence du paquet switcheroo-control
sur ma machine avec 0 ou 1 il me donne le même retour sans erreur  roll (je n'ai qu'une carte graphique sur une machine de bureau )

Dernière modification par robert2a (15-10-2020 13:51:26)

Hors ligne

#22 16-10-2020 02:43:31

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

ludo@debian-msi:~$ DRI_PRIME=1 glxinfo -B
Device: Radeon RX 5500M (NAVI14, DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1) (0x7340)



ludo@debian-msi:~$ DRI_PRIME=0 glxinfo -B
Device: AMD RENOIR (DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1) (0x1636)



DRI_PRIME=0 firefox démarre bien firefox.

                 ____________________________

You can launch individual apps using the dedicated GPU by running them
with the environment variable DRI_PRIME=1. Or you can right-click on the
app (while it's not running) in GNOME Shell's Activities Overview
and choose the "Launch using Dedicated Graphics Card" option.


Sous KDE le clic droit ne donne pas l'option du choix du gpu.
A suivre je dois vérifier plus tard la compatibilité KDE /  switcheroo-control

                 _____________________________


P.S.
C'est plus un memo pour moi, install wayland :

root@debian-msi:~# apt-get install plasma-workspace-wayland


=>1er essais de wayland sous KDE, un kernel panic est survenu.
=>2ième essais, ça à l'air de tenir ... a voir la stabilité sous jeux ou dans le temps.


Problème, au démarrage, Plasma se connecte direct avec ma session sans me demander les login / mdp
=> il fallait re-installer un ecran de connection dans les options de démarrage

Dernière modification par ludopika (16-10-2020 03:36:10)

Hors ligne

#23 16-10-2020 05:57:47

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : HDMI amdgpu

Bonjour

tu a le grub par défaut sans option ?
pour le Xorg.0.log tu peu l' effacer , sous wayland il ne va pas le recréer
pour l'utilitaire de connexion de KDE je connais pas (gdm3 sous gnome )
par défaut au démarrage tu est sous renoir
pour certaine application tu switch sur la 5500M (besoin de puissance)
tu a l' init des gpu sous /var/log/syslog
tu n' a pas encore installé "switcheroo-control" ?
l'autonomie de la batterie doit être correcte .

Dernière modification par robert2a (16-10-2020 05:59:22)

Hors ligne

#24 16-10-2020 17:08:15

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Bonjour.

Excuse moi pour le temps de réponse. Je me suis aperçu que debian louchait un peu à gauche ...

J'avais 3 partitions au départ :
- /racine
- /swap
- /home

Et debian utilisait encore un /home dans la partition /racine sans utiliser celle que je lui avait attribué.
Je me suis retrouvé avec /racine full, plus moyen d'installer quoi que ce soit, et une partition /home complètement vide ... en 12 ans de debian c'est la 1ere fois que j'ai ça.
J'ai donc décidé de tout réinstaller au propre, cette fois le /home est bien utilisé.

         _________________________

Donc oui grub sans option.
Switcheroo ne fonctionne qu'avec gnome.
Sous KDE il faut passer avec DRI_PRIME=1 ou 0.

Pour le moment nous avons compris que 2 GPU se disputent les droits TV, mais ça ne me dit pas comment avoir l'HDMI reconnu.

=> pour switcheroo-control je reviens sur mes écrits, il faut aller dans les options des applications depuis le lanceur d'appli.
    => clic droit sur l'appli => éditer les applications => onglet application => options avancées => cocher puce dédié au GPU

Pour l'utilisation de wayland c'est une catastrophe. Freeze sur freeze en moins de 10 secondes. Pas moyen de tester.
voici le grub sans les commentaires :

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_CMDLINE_LINUX=""
 

Dernière modification par ludopika (17-10-2020 02:39:24)

Hors ligne

#25 17-10-2020 01:46:34

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.8.14-amd64
(G)UI : KDE
Inscription : 01-09-2007

Re : HDMI amdgpu

Bonjour robert.

J'en suis à me demander si le sources.list ne fait pas obstacle. C'est mon 1er sous testing ...
Ca te semble correct ?

deb http://ftp.be.debian.org/debian/ bullseye main contrib non-free

deb http://security.debian.org testing-security/updates main contrib non-free

deb http://ftp.be.debian.org/debian/ bullseye-updates main contrib non-free

deb http://deb.debian.org/debian bullseye main contrib non-free

deb http://deb.debian.org/debian-security/ testing-security/updates main contrib non-free

deb http://deb.debian.org/debian testing-updates main contrib non-free

deb http://deb.debian.org/debian buster-backports main contrib non-free

deb http://www.deb-multimedia.org bullseye main non-free

deb http://files.eid.belgium.be/debian buster main

deb https://dl.winehq.org/wine-builds/debian/ buster main
 



Bon je tourne en rond, je vais dormir ... scratchhead.gif

Dernière modification par ludopika (17-10-2020 02:40:52)

Hors ligne

Pied de page des forums