Debian Debian-France Debian-Facile Debian-fr.org Debian-fr.xyz Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 14-12-2020 00:36:49

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 17-06-2018

debian qui perd ses billes

Bonjour,
J'ai un soucis récurrent :  le debian installé ne s'initialise plus  car il me sucre le driver nvidia,.
Je suis donc obliger en mode rescue de reinstaller les drivers nvidia propriétaire pour le faire refonctionner.

J'avais un autre soucis d'ou j'ai été obliger de reinstaller un autre driver vboxnetflt.

Avez vous ce genre problémes ?

Car le Debian installé perd souvent ses billes.

Merci.

Hors ligne

#2 14-12-2020 05:06:26

robert2a
Membre
Inscription : 15-11-2014

Re : debian qui perd ses billes

Bonsoir
non pas de problèmes .

tu a gnome sur une debian stretch , je suppose que  pas souvent de mise a jour.
l'installation d'un driver ne disparaît pas tout seul , tu dois faire quelque chose de mal pour le casser .

tu n' aurais pas les backports activés de stretch ?
si oui , il te faut les méta paquets des backports "linux-image-amd64" et "linux-headers-amd64" et utiliser le driver 340 des backports.
ça devrait résoudre le souci de vboxnetflt (virtualbox je suppose ) qui n'est disponible que sur les backports de stretch .
si je ne me trompe pas
ta machine ne supporte pas stable (debian buster)  ?

En ligne

#3 14-12-2020 23:29:29

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 17-06-2018

Re : debian qui perd ses billes

Tous était à jour.
Mon PC était allumé depuis 2 jours et demi et il y avais que les machine virtuelles (virtualbox) ,audacious,firefox,remmina qui ont tourné.
Firefox contient une trentaine d'onglet ouvertes (j'oublie de les fermer aprés visite) ,est ce cela ????

tu dois faire quelque chose de mal pour le casser .


Peux être mais je ne sais pas lequelle

Hors ligne

#4 14-12-2020 23:45:43

otyugh
CA Debian-Facile
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016
Site Web

Re : debian qui perd ses billes

Nah jamais eu ce souci.
Par contre j'installe assez rarement le driver proprio pour nvidia, gébérakement nouveau fait tout ce que je veux (sauf pour certains jeux).

Dernière modification par otyugh (14-12-2020 23:46:16)


datalove-datalove-s1-2.png agendadulibre-lagendadulibre.png arzinfo-arzinfo.png

En ligne

#5 15-12-2020 07:37:46

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : debian qui perd ses billes

Bonjour,
Comment as-tu réinstallé vboxnetfl ?
J’imagine que c’est lors des mises à jour qu’il y a suppression du driver Nvidia ?
Quels sont les retours de

apt update


et de la simulation d’une mise à jour :

apt -s upgrade

Hors ligne

#6 15-12-2020 15:53:37

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-16-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : debian qui perd ses billes

hello
j'avais eu se genre de soucis avec les modules virtualbox
comme dit robert2a ils faut les meta paquets sinon lors de la contruction des modules virtualbox tu as ce genre de message

This system is currently not set up to build kernel modules.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

En ligne

#7 15-12-2020 20:48:34

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 17-06-2018

Re : debian qui perd ses billes

chalu a écrit :

Bonjour,
Comment as-tu réinstallé vboxnetfl ?
J’imagine que c’est lors des mises à jour qu’il y a suppression du driver Nvidia ?
Quels sont les retours de

apt update


et de la simulation d’une mise à jour :

apt -s upgrade



J'ai reinstaller vboxnetflt avec sans doute la commande vboxconfig (de mémoire)

apt update me retourne ceux-ci :

apt update
Réception de:1 http://security.debian.org stretch/updates InRelease [53,0 kB]
Réception de:2 http://ftp.debian.org/debian stretch-backports InRelease [91,8 kB]
Ign:3 http://deb.debian.org/debian stretch InRelease                           
Ign:4 http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy InRelease   
Réception de:5 http://deb.debian.org/debian stretch-updates InRelease [93,6 kB]
Err:6 http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy Release     
  404  Not Found [IP : 2001:67c:1560:8008::19 80]
Atteint:7 http://deb.debian.org/debian stretch Release         
Lecture des listes de paquets... Fait
E: The repository 'http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.



et
apt -s upgrade me retourne :

apt -s upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-headers-4.9.0-8-amd64 linux-headers-4.9.0-8-common
  linux-headers-4.9.0-9-amd64 linux-headers-4.9.0-9-common
  linux-image-4.9.0-8-amd64 linux-image-4.9.0-9-amd64
Veuillez utiliser « apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.



voila;

Hors ligne

#8 16-12-2020 21:52:49

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 17-06-2018

Re : debian qui perd ses billes

Est ce cela peux être incriminer ?


xrandr --output HDMI-0 --brightness 0.5
xrandr --output VGA-0 --brightness 0.5
 



J'utilise ces commandes pour baisser le contraste.

Hors ligne

#9 20-12-2020 20:17:46

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 17-06-2018

Re : debian qui perd ses billes

up

Hors ligne

#10 20-12-2020 20:59:02

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-16-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : debian qui perd ses billes

on peu étrange ton sources.list, il est sensé servir a quoi ce dépôt ppa?
donne le retour de

cat /etc/apt/sources.list


cat /etc/apt/sources.list.d/*


apt policy linux-image-amd64 linux-headers-amd64 dkms


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

En ligne

#11 21-12-2020 22:18:55

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 17-06-2018

Re : debian qui perd ses billes


cat /etc/apt/sources.list
 



#

# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

# deb http://deb.debian.org/debian/ stretch main

#deprecier deb http://deb.debian.org/debian/ stretch/updates main
#deprecier deb-src http://deb.debian.org/debian/ stretch/updates main

# stretch-updates, previously known as 'volatile'
# deb http://deb.debian.org/debian/ stretch-updates main


#Added by my

# stretch-backports
# deb http://httpredir.debian.org/debian stretch-backports main contrib non-free

#https://blog.programster.org/debian-9-install-nvidia-drivers
# deb http://deb.debian.org/debian/ stretch contrib non-free

# deb http://deb.debian.org/debian/ stretch-updates contrib non-free

# deb http://security.debian.org/ stretch/updates main contrib non-free
 





cat /etc/apt/sources.list.d/*
 



deb http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy main
# deb-src http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy main
deb http://ftp.debian.org/debian stretch-backports main
deb http://ftp.debian.org/debian stretch-backports main
# Debian Stretch, dépôt principal + paquets non libres
deb http://deb.debian.org/debian/ stretch main contrib non-free
# Debian Stretch, mises à jour de sécurité + paquets non libres
deb http://security.debian.org/ stretch/updates main contrib non-free
# Debian Stretch, mises à jour "volatiles" + paquets non libres
deb http://deb.debian.org/debian/ stretch-updates main contrib non-free
# Debian Stretch, dépôt principal + paquets non libres
deb http://deb.debian.org/debian/ stretch main contrib non-free
# Debian Stretch, mises à jour de sécurité + paquets non libres
deb http://security.debian.org/ stretch/updates main contrib non-free
# Debian Stretch, mises à jour "volatiles" + paquets non libres
deb http://deb.debian.org/debian/ stretch-updates main contrib non-free
 




apt policy linux-image-amd64 linux-headers-amd64 dkms
 



inux-image-amd64:
  Installé : 4.9+80+deb9u12
  Candidat : 4.9+80+deb9u12
 Table de version :
     4.19+105+deb10u4~bpo9+1 100
        100 http://ftp.debian.org/debian stretch-backports/main amd64 Packages
 *** 4.9+80+deb9u12 500
        500 http://security.debian.org stretch/updates/main amd64 Packages
        100 /var/lib/dpkg/status
     4.9+80+deb9u11 500
        500 http://deb.debian.org/debian stretch/main amd64 Packages
linux-headers-amd64:
  Installé : 4.9+80+deb9u12
  Candidat : 4.9+80+deb9u12
 Table de version :
     4.19+105+deb10u4~bpo9+1 100
        100 http://ftp.debian.org/debian stretch-backports/main amd64 Packages
 *** 4.9+80+deb9u12 500
        500 http://security.debian.org stretch/updates/main amd64 Packages
        100 /var/lib/dpkg/status
     4.9+80+deb9u11 500
        500 http://deb.debian.org/debian stretch/main amd64 Packages
dkms:
  Installé : (aucun)
  Candidat : 2.3-2
 Table de version :
     2.6.1-4~bpo9+1 100
        100 http://ftp.debian.org/debian stretch-backports/main amd64 Packages
     2.3-2 500
        500 http://deb.debian.org/debian stretch/main amd64 Packages
 

Hors ligne

#12 22-12-2020 10:26:06

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-16-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : debian qui perd ses billes

Hello
j'aurais tendance a dire que c'est parce que dkms n'est pas installé que tu as des soucis avec ton driver nvidia

apt install dkms



Niveau fichier sources.list je comprend pas trop ta configuration
toutes les lignes sont inactive dans ton fichiers principales
pourtant les dépôts Stretch sont bien activé dans tes fichiers sources supplémentaire 

pourquoi ce dépôt?

deb http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy main


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

En ligne

#13 22-12-2020 21:44:36

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 17-06-2018

Re : debian qui perd ses billes


J'avais mis ce lien car j'avais besoin d'installer un paquet (dont je ne m'en souviens plus) non disponible sur Debian, en tout cas le lien ne marche pas..

Si installe dkms le driver nvidia proprio risque de ne plus fonctionner.

Dernière modification par sizy458 (22-12-2020 21:45:09)

Hors ligne

#14 20-04-2021 22:04:54

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 17-06-2018

Re : debian qui perd ses billes

Toujours le même probléme, je dois reinstaller par moment les drivers nvidia.
Voici le log recupérer :


[    23.424]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    23.425] X Protocol Version 11, Revision 0
[    23.425] Build Operating System: Linux 5.10.0-5-amd64 x86_64 Debian
[    23.425] Current Operating System: Linux persodebian 4.9.0-15-amd64 #1 SMP Debian 4.9.258-1 (2021-03-08) x86_64
[    23.425] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-15-amd64 root=UUID=5c455657-6dff-4962-956f-eaa1dde45996 ro single
[    23.425] Build Date: 15 April 2021  11:19:14AM
[    23.425] xorg-server 2:1.19.2-1+deb9u8 (https://www.debian.org/support)
[    23.425] Current version of pixman: 0.34.0
[    23.426]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    23.426] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.427] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 20 21:53:44 2021
[    23.438] (==) Using config file: "/etc/X11/xorg.conf"
[    23.438] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.512] (==) ServerLayout "Layout0"
[    23.512] (**) |-->Screen "Screen0" (0)
[    23.512] (**) |   |-->Monitor "Monitor0"
[    23.513] (**) |   |-->Device "Device0"
[    23.513] (**) |-->Input Device "Keyboard0"
[    23.513] (**) |-->Input Device "Mouse0"
[    23.513] (==) Automatically adding devices
[    23.513] (==) Automatically enabling devices
[    23.513] (==) Automatically adding GPU devices
[    23.513] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.557] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.557]  Entry deleted from font path.
[    23.581] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    23.581] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.581] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    23.581] (WW) Disabling Keyboard0
[    23.581] (WW) Disabling Mouse0
[    23.581] (II) Loader magic: 0x55ecf7ef6e00
[    23.581] (II) Module ABI versions:
[    23.581]  X.Org ANSI C Emulation: 0.4
[    23.581]  X.Org Video Driver: 23.0
[    23.581]  X.Org XInput driver : 24.1
[    23.582]  X.Org Server Extension : 10.0
[    23.582] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[    23.582] (++) using VT number 1

[    23.582] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.585] (--) PCI:*(0:1:0:0) 10de:0f01:10b0:0f01 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    23.585] (II) LoadModule: "glx"
[    23.607] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.664] (II) Module glx: vendor="X.Org Foundation"
[    23.664]  compiled for 1.19.2, module version = 1.0.0
[    23.664]  ABI class: X.Org Server Extension, version 10.0
[    23.664] (II) LoadModule: "nvidia"
[    23.679] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    23.730] (II) Module nvidia: vendor="NVIDIA Corporation"
[    23.730]  compiled for 4.0.2, module version = 1.0.0
[    23.730]  Module class: X.Org Video Driver
[    23.744] (II) NVIDIA dlloader X Driver  390.138  Thu May 14 03:33:57 PDT 2020
[    23.744] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    23.758] (II) Loading sub module "fb"
[    23.758] (II) LoadModule: "fb"
[    23.770] (II) Loading /usr/lib/xorg/modules/libfb.so
[    23.782] (II) Module fb: vendor="X.Org Foundation"
[    23.782]  compiled for 1.19.2, module version = 1.0.0
[    23.782]  ABI class: X.Org ANSI C Emulation, version 0.4
[    23.782] (II) Loading sub module "wfb"
[    23.782] (II) LoadModule: "wfb"
[    23.782] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    23.786] (II) Module wfb: vendor="X.Org Foundation"
[    23.786]  compiled for 1.19.2, module version = 1.0.0
[    23.786]  ABI class: X.Org ANSI C Emulation, version 0.4
[    23.786] (II) Loading sub module "ramdac"
[    23.786] (II) LoadModule: "ramdac"
[    23.786] (II) Module "ramdac" already built-in
[    23.803] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    23.803] (==) NVIDIA(0): RGB weight 888
[    23.803] (==) NVIDIA(0): Default visual is TrueColor
[    23.803] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    23.804] (**) NVIDIA(0): Enabling 2D acceleration
[    23.804] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[    23.804] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[    23.804] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[    23.804] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[    23.804] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[    24.551] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    24.551] (--) NVIDIA(0):     CRT-0
[    24.551] (--) NVIDIA(0):     CRT-1
[    24.551] (--) NVIDIA(0):     DFP-0
[    24.551] (--) NVIDIA(0):     DFP-1 (boot)
[    24.553] (II) NVIDIA(0): NVIDIA GPU GeForce GT 620 (GF108) at PCI:1:0:0 (GPU-0)
[    24.553] (--) NVIDIA(0): Memory: 2097152 kBytes
[    24.553] (--) NVIDIA(0): VideoBIOS: 70.08.ae.00.00
[    24.553] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    24.555] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    24.555] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    24.555] (--) NVIDIA(GPU-0):
[    24.570] (--) NVIDIA(GPU-0): DELL P2414H (CRT-1): connected
[    24.570] (--) NVIDIA(GPU-0): DELL P2414H (CRT-1): 400.0 MHz maximum pixel clock
[    24.570] (--) NVIDIA(GPU-0):
[    24.572] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    24.572] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    24.572] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    24.573] (--) NVIDIA(GPU-0):
[    24.587] (--) NVIDIA(GPU-0): ViewSonic VG2448 (DFP-1): connected
[    24.587] (--) NVIDIA(GPU-0): ViewSonic VG2448 (DFP-1): Internal TMDS
[    24.587] (--) NVIDIA(GPU-0): ViewSonic VG2448 (DFP-1): 225.0 MHz maximum pixel clock
[    24.587] (--) NVIDIA(GPU-0):
[    24.594] (==) NVIDIA(0):
[    24.594] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    24.594] (==) NVIDIA(0):     will be used as the requested mode.
[    24.594] (==) NVIDIA(0):
[    24.594] (II) NVIDIA(0): Validated MetaModes:
[    24.594] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select,CRT-1:nvidia-auto-select"
[    24.594] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[    24.600] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[    24.600] (--) NVIDIA(0):     option
[    24.600] (--) Depth 24 pixmap format is 32 bpp
[    24.601] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[    24.601] (II) NVIDIA:     access.
[    24.603] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    24.603] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    24.603] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    24.603] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    24.603] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    24.603] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    24.603] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    24.603] (II) NVIDIA(0):     Config Options in the README.
[    24.624] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select,CRT-1:nvidia-auto-select"
[    24.723] (==) NVIDIA(0): Disabling shared memory pixmaps
[    24.723] (==) NVIDIA(0): Backing store enabled
[    24.723] (==) NVIDIA(0): Silken mouse enabled
[    24.724] (**) NVIDIA(0): DPMS enabled
[    24.738] (II) Loading sub module "dri2"
[    24.738] (II) LoadModule: "dri2"
[    24.738] (II) Module "dri2" already built-in
[    24.738] (II) NVIDIA(0): [DRI2] Setup complete
[    24.738] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    24.739] (--) RandR disabled
[    24.747] (II) SELinux: Disabled on system
[    24.748] (II) AIGLX: Screen 0 is not DRI2 capable
[    24.748] (EE) AIGLX: reverting to software rendering
[    25.148] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch)
[    25.148] (EE) GLX: could not load software renderer
[    25.148] (II) GLX: no usable GL providers found for screen 0
[    25.478] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    25.478] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.478] (II) LoadModule: "libinput"
[    25.493] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    25.542] (II) Module libinput: vendor="X.Org Foundation"
[    25.542]  compiled for 1.19.0, module version = 0.23.0
[    25.542]  Module class: X.Org XInput Driver
[    25.542]  ABI class: X.Org XInput driver, version 24.1
[    25.542] (II) Using input driver 'libinput' for 'Power Button'
[    25.542] (**) Power Button: always reports core events
[    25.542] (**) Option "Device" "/dev/input/event5"
[    25.542] (**) Option "_source" "server/udev"
[    25.543] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    25.543] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    25.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5"
[    25.580] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    25.580] (**) Option "xkb_model" "pc105"
[    25.580] (**) Option "xkb_layout" "fr"
[    25.580] (**) Option "xkb_variant" "latin9"
[    25.613] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    25.613] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    25.614] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    25.614] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.614] (II) Using input driver 'libinput' for 'Power Button'
[    25.614] (**) Power Button: always reports core events
[    25.614] (**) Option "Device" "/dev/input/event4"
[    25.614] (**) Option "_source" "server/udev"
[    25.614] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    25.614] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    25.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4"
[    25.656] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    25.656] (**) Option "xkb_model" "pc105"
[    25.656] (**) Option "xkb_layout" "fr"
[    25.656] (**) Option "xkb_variant" "latin9"
[    25.657] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    25.657] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    25.658] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[    25.658] (II) No input driver specified, ignoring this device.
[    25.658] (II) This device may have been added with another device file.
[    25.658] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[    25.658] (II) No input driver specified, ignoring this device.
[    25.658] (II) This device may have been added with another device file.
[    25.659] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[    25.659] (II) No input driver specified, ignoring this device.
[    25.659] (II) This device may have been added with another device file.
[    25.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[    25.660] (II) No input driver specified, ignoring this device.
[    25.660] (II) This device may have been added with another device file.
[    25.661] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event0)
[    25.661] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    25.661] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[    25.661] (**) USB Optical Mouse: always reports core events
[    25.661] (**) Option "Device" "/dev/input/event0"
[    25.661] (**) Option "_source" "server/udev"
[    25.720] (II) input device 'USB Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[    25.720] (II) input device 'USB Optical Mouse', /dev/input/event0 is a pointer caps
[    25.760] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb2/2-4/2-4.3/2-4.3:1.0/0003:045E:0797.0001/input/input3/event0"
[    25.760] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[    25.760] (**) Option "AccelerationScheme" "none"
[    25.760] (**) USB Optical Mouse: (accel) selected scheme none/0
[    25.760] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    25.760] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    25.820] (II) input device 'USB Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[    25.820] (II) input device 'USB Optical Mouse', /dev/input/event0 is a pointer caps
[    25.821] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    25.821] (II) No input driver specified, ignoring this device.
[    25.821] (II) This device may have been added with another device file.
[    25.822] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[    25.823] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    25.823] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[    25.823] (**) Logitech USB Keyboard: always reports core events
[    25.823] (**) Option "Device" "/dev/input/event1"
[    25.823] (**) Option "_source" "server/udev"
[    25.823] (II) input device 'Logitech USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[    25.823] (II) input device 'Logitech USB Keyboard', /dev/input/event1 is a keyboard
[    25.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb2/2-4/2-4.4/2-4.4:1.0/0003:046D:C328.0002/input/input4/event1"
[    25.852] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[    25.852] (**) Option "xkb_model" "pc105"
[    25.852] (**) Option "xkb_layout" "fr"
[    25.852] (**) Option "xkb_variant" "latin9"
[    25.853] (II) input device 'Logitech USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[    25.853] (II) input device 'Logitech USB Keyboard', /dev/input/event1 is a keyboard
[    25.854] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[    25.854] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    25.854] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[    25.854] (**) Logitech USB Keyboard: always reports core events
[    25.854] (**) Option "Device" "/dev/input/event2"
[    25.854] (**) Option "_source" "server/udev"
[    25.855] (II) input device 'Logitech USB Keyboard', /dev/input/event2 is tagged by udev as: Keyboard
[    25.855] (II) input device 'Logitech USB Keyboard', /dev/input/event2 is a keyboard
[    25.888] (II) libinput: Logitech USB Keyboard: needs a virtual subdevice
[    25.888] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb2/2-4/2-4.4/2-4.4:1.1/0003:046D:C328.0003/input/input5/event2"
[    25.888] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: MOUSE, id 10)
[    25.888] (**) Option "AccelerationScheme" "none"
[    25.888] (**) Logitech USB Keyboard: (accel) selected scheme none/0
[    25.888] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[    25.888] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[    25.889] (II) input device 'Logitech USB Keyboard', /dev/input/event2 is tagged by udev as: Keyboard
[    25.889] (II) input device 'Logitech USB Keyboard', /dev/input/event2 is a keyboard
[    25.890] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7)
[    25.890] (II) No input driver specified, ignoring this device.
[    25.890] (II) This device may have been added with another device file.
[    25.890] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[    25.890] (II) No input driver specified, ignoring this device.
[    25.890] (II) This device may have been added with another device file.
[    25.891] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)
[    25.891] (II) No input driver specified, ignoring this device.
[    25.891] (II) This device may have been added with another device file.
[    25.891] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[    25.891] (II) No input driver specified, ignoring this device.
[    25.891] (II) This device may have been added with another device file.
[    25.892] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
[    25.892] (II) No input driver specified, ignoring this device.
[    25.892] (II) This device may have been added with another device file.
[    25.893] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12)
[    25.893] (II) No input driver specified, ignoring this device.
[    25.893] (II) This device may have been added with another device file.
[    25.893] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event13)
[    25.893] (II) No input driver specified, ignoring this device.
[    25.893] (II) This device may have been added with another device file.
[    25.894] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[    25.894] (II) No input driver specified, ignoring this device.
[    25.894] (II) This device may have been added with another device file.
[    25.894] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    25.894] (II) No input driver specified, ignoring this device.
[    25.894] (II) This device may have been added with another device file.
[    25.898] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    25.898] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[    25.898] (**) Logitech USB Keyboard: always reports core events
[    25.898] (**) Option "Device" "/dev/input/event2"
[    25.898] (**) Option "_source" "_driver/libinput"
[    25.898] (II) libinput: Logitech USB Keyboard: is a virtual subdevice
[    25.898] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb2/2-4/2-4.4/2-4.4:1.1/0003:046D:C328.0003/input/input5/event2"
[    25.898] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[    25.898] (**) Option "xkb_model" "pc105"
[    25.898] (**) Option "xkb_layout" "fr"
[    25.898] (**) Option "xkb_variant" "latin9"
[    25.899] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[    30.813] (II) UnloadModule: "libinput"
[    30.813] (II) UnloadModule: "libinput"
[    30.813] (II) UnloadModule: "libinput"
[    30.814] (II) UnloadModule: "libinput"
[    30.814] (II) UnloadModule: "libinput"
[    30.814] (II) UnloadModule: "libinput"
[    31.245] (II) NVIDIA(GPU-0): Deleting GPU-0
[    31.246] (II) Server terminated successfully (0). Closing log file.

 



Je ne sais pas ce qu'il se passe.
J'ai utiliser juste VirtualBox et audacious et xrandr, rien fait d'autre.
J'ai reinstaller les drivers nvidia et ca remarche.

Dernière modification par sizy458 (20-04-2021 22:05:36)

Hors ligne

Pied de page des forums