debian qui perd ses billes

sizy458 · 13-12-2020 23:36:49

Bonjour,
J'ai un soucis récurrent : le debian installé ne s'initialise plus car il me sucre le driver nvidia,.
Je suis donc obliger en mode rescue de reinstaller les drivers nvidia propriétaire pour le faire refonctionner.

J'avais un autre soucis d'ou j'ai été obliger de reinstaller un autre driver vboxnetflt.

Avez vous ce genre problémes ?

Car le Debian installé perd souvent ses billes.

Merci.

anonyme · 14-12-2020 04:06:26

Bonsoir
non pas de problèmes .

tu a gnome sur une debian stretch , je suppose que pas souvent de mise a jour.
l'installation d'un driver ne disparaît pas tout seul , tu dois faire quelque chose de mal pour le casser .

tu n' aurais pas les backports activés de stretch ?
si oui , il te faut les méta paquets des backports "linux-image-amd64" et "linux-headers-amd64" et utiliser le driver 340 des backports.
ça devrait résoudre le souci de vboxnetflt (virtualbox je suppose ) qui n'est disponible que sur les backports de stretch .
si je ne me trompe pas
ta machine ne supporte pas stable (debian buster) ?

sizy458 · 14-12-2020 22:29:29

Tous était à jour.
Mon PC était allumé depuis 2 jours et demi et il y avais que les machine virtuelles (virtualbox) ,audacious,firefox,remmina qui ont tourné.
Firefox contient une trentaine d'onglet ouvertes (j'oublie de les fermer aprés visite) ,est ce cela ????

tu dois faire quelque chose de mal pour le casser .

Peux être mais je ne sais pas lequelle

otyugh · 14-12-2020 22:45:43

Nah jamais eu ce souci.
Par contre j'installe assez rarement le driver proprio pour nvidia, gébérakement nouveau fait tout ce que je veux (sauf pour certains jeux).

Dernière modification par otyugh (14-12-2020 22:46:16)

chalu · 15-12-2020 06:37:46

Bonjour,
Comment as-tu réinstallé vboxnetfl ?
J’imagine que c’est lors des mises à jour qu’il y a suppression du driver Nvidia ?
Quels sont les retours de

apt update

et de la simulation d’une mise à jour :

apt -s upgrade 

Croutons · 15-12-2020 14:53:37

hello
j'avais eu se genre de soucis avec les modules virtualbox
comme dit anonyme ils faut les meta paquets sinon lors de la contruction des modules virtualbox tu as ce genre de message

This system is currently not set up to build kernel modules.

Please install the Linux kernel "header" files matching the current kernel

for adding new hardware support to the system.

The distribution packages containing the headers are probably:

sizy458 · 15-12-2020 19:48:34

chalu a écrit :

Bonjour,
Comment as-tu réinstallé vboxnetfl ?
J’imagine que c’est lors des mises à jour qu’il y a suppression du driver Nvidia ?
Quels sont les retours de
apt update

et de la simulation d’une mise à jour :
apt -s upgrade

J'ai reinstaller vboxnetflt avec sans doute la commande vboxconfig (de mémoire)

apt update me retourne ceux-ci :

apt update
Réception de:1 http://security.debian.org stretch/updates InRelease [53,0 kB]
Réception de:2 http://ftp.debian.org/debian stretch-backports InRelease [91,8 kB]
Ign:3 http://deb.debian.org/debian stretch InRelease
Ign:4 http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy InRelease
Réception de:5 http://deb.debian.org/debian stretch-updates InRelease [93,6 kB]
Err:6 http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy Release
404 Not Found [IP : 2001:67c:1560:8008::19 80]
Atteint:7 http://deb.debian.org/debian stretch Release
Lecture des listes de paquets... Fait
E: The repository 'http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.

et
apt -s upgrade me retourne :

apt -s upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
linux-headers-4.9.0-8-amd64 linux-headers-4.9.0-8-common
linux-headers-4.9.0-9-amd64 linux-headers-4.9.0-9-common
linux-image-4.9.0-8-amd64 linux-image-4.9.0-9-amd64
Veuillez utiliser « apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

voila;

sizy458 · 16-12-2020 20:52:49

Est ce cela peux être incriminer ?

xrandr --output HDMI-0 --brightness 0.5

xrandr --output VGA-0 --brightness 0.5

J'utilise ces commandes pour baisser le contraste.

sizy458 · 20-12-2020 19:17:46

up

Croutons · 20-12-2020 19:59:02

on peu étrange ton sources.list, il est sensé servir a quoi ce dépôt ppa?
donne le retour de

cat /etc/apt/sources.list

cat /etc/apt/sources.list.d/*

apt policy linux-image-amd64 linux-headers-amd64 dkms

sizy458 · 21-12-2020 21:18:55

cat /etc/apt/sources.list

 

# 

# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

# deb http://deb.debian.org/debian/ stretch main

#deprecier deb http://deb.debian.org/debian/ stretch/updates main

#deprecier deb-src http://deb.debian.org/debian/ stretch/updates main

# stretch-updates, previously known as 'volatile'

# deb http://deb.debian.org/debian/ stretch-updates main

#Added by my

# stretch-backports

# deb http://httpredir.debian.org/debian stretch-backports main contrib non-free

#https://blog.programster.org/debian-9-install-nvidia-drivers

# deb http://deb.debian.org/debian/ stretch contrib non-free

# deb http://deb.debian.org/debian/ stretch-updates contrib non-free

# deb http://security.debian.org/ stretch/updates main contrib non-free

cat /etc/apt/sources.list.d/*

 

deb http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy main

# deb-src http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy main

deb http://ftp.debian.org/debian stretch-backports main

deb http://ftp.debian.org/debian stretch-backports main

# Debian Stretch, dépôt principal + paquets non libres

deb http://deb.debian.org/debian/ stretch main contrib non-free

# Debian Stretch, mises à jour de sécurité + paquets non libres

deb http://security.debian.org/ stretch/updates main contrib non-free

# Debian Stretch, mises à jour "volatiles" + paquets non libres

deb http://deb.debian.org/debian/ stretch-updates main contrib non-free

# Debian Stretch, dépôt principal + paquets non libres

deb http://deb.debian.org/debian/ stretch main contrib non-free

# Debian Stretch, mises à jour de sécurité + paquets non libres

deb http://security.debian.org/ stretch/updates main contrib non-free

# Debian Stretch, mises à jour "volatiles" + paquets non libres

deb http://deb.debian.org/debian/ stretch-updates main contrib non-free

apt policy linux-image-amd64 linux-headers-amd64 dkms

 

inux-image-amd64:

  Installé : 4.9+80+deb9u12

  Candidat : 4.9+80+deb9u12

 Table de version :

     4.19+105+deb10u4~bpo9+1 100

        100 http://ftp.debian.org/debian stretch-backports/main amd64 Packages

 *** 4.9+80+deb9u12 500

        500 http://security.debian.org stretch/updates/main amd64 Packages

        100 /var/lib/dpkg/status

     4.9+80+deb9u11 500

        500 http://deb.debian.org/debian stretch/main amd64 Packages

linux-headers-amd64:

  Installé : 4.9+80+deb9u12

  Candidat : 4.9+80+deb9u12

 Table de version :

     4.19+105+deb10u4~bpo9+1 100

        100 http://ftp.debian.org/debian stretch-backports/main amd64 Packages

 *** 4.9+80+deb9u12 500

        500 http://security.debian.org stretch/updates/main amd64 Packages

        100 /var/lib/dpkg/status

     4.9+80+deb9u11 500

        500 http://deb.debian.org/debian stretch/main amd64 Packages

dkms:

  Installé : (aucun)

  Candidat : 2.3-2

 Table de version :

     2.6.1-4~bpo9+1 100

        100 http://ftp.debian.org/debian stretch-backports/main amd64 Packages

     2.3-2 500

        500 http://deb.debian.org/debian stretch/main amd64 Packages

Croutons · 22-12-2020 09:26:06

Hello
j'aurais tendance a dire que c'est parce que dkms n'est pas installé que tu as des soucis avec ton driver nvidia

apt install dkms

Niveau fichier sources.list je comprend pas trop ta configuration
toutes les lignes sont inactive dans ton fichiers principales
pourtant les dépôts Stretch sont bien activé dans tes fichiers sources supplémentaire

pourquoi ce dépôt?

deb http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy main

sizy458 · 22-12-2020 20:44:36

deb http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu groovy main

J'avais mis ce lien car j'avais besoin d'installer un paquet (dont je ne m'en souviens plus) non disponible sur Debian, en tout cas le lien ne marche pas..

Si installe dkms le driver nvidia proprio risque de ne plus fonctionner.

Dernière modification par sizy458 (22-12-2020 20:45:09)

sizy458 · 20-04-2021 21:04:54

Toujours le même probléme, je dois reinstaller par moment les drivers nvidia.
Voici le log recupérer :

[    23.424] 

X.Org X Server 1.19.2

Release Date: 2017-03-02

[    23.425] X Protocol Version 11, Revision 0

[    23.425] Build Operating System: Linux 5.10.0-5-amd64 x86_64 Debian

[    23.425] Current Operating System: Linux persodebian 4.9.0-15-amd64 #1 SMP Debian 4.9.258-1 (2021-03-08) x86_64

[    23.425] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-15-amd64 root=UUID=5c455657-6dff-4962-956f-eaa1dde45996 ro single

[    23.425] Build Date: 15 April 2021  11:19:14AM

[    23.425] xorg-server 2:1.19.2-1+deb9u8 (https://www.debian.org/support) 

[    23.425] Current version of pixman: 0.34.0

[    23.426]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    23.426] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    23.427] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 20 21:53:44 2021

[    23.438] (==) Using config file: "/etc/X11/xorg.conf"

[    23.438] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    23.512] (==) ServerLayout "Layout0"

[    23.512] (**) |-->Screen "Screen0" (0)

[    23.512] (**) |   |-->Monitor "Monitor0"

[    23.513] (**) |   |-->Device "Device0"

[    23.513] (**) |-->Input Device "Keyboard0"

[    23.513] (**) |-->Input Device "Mouse0"

[    23.513] (==) Automatically adding devices

[    23.513] (==) Automatically enabling devices

[    23.513] (==) Automatically adding GPU devices

[    23.513] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    23.557] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    23.557]  Entry deleted from font path.

[    23.581] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    23.581] (==) ModulePath set to "/usr/lib/xorg/modules"

[    23.581] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.

[    23.581] (WW) Disabling Keyboard0

[    23.581] (WW) Disabling Mouse0

[    23.581] (II) Loader magic: 0x55ecf7ef6e00

[    23.581] (II) Module ABI versions:

[    23.581]  X.Org ANSI C Emulation: 0.4

[    23.581]  X.Org Video Driver: 23.0

[    23.581]  X.Org XInput driver : 24.1

[    23.582]  X.Org Server Extension : 10.0

[    23.582] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)

[    23.582] (++) using VT number 1

[    23.582] (II) xfree86: Adding drm device (/dev/dri/card0)

[    23.585] (--) PCI:*(0:1:0:0) 10de:0f01:10b0:0f01 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072

[    23.585] (II) LoadModule: "glx"

[    23.607] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    23.664] (II) Module glx: vendor="X.Org Foundation"

[    23.664]  compiled for 1.19.2, module version = 1.0.0

[    23.664]  ABI class: X.Org Server Extension, version 10.0

[    23.664] (II) LoadModule: "nvidia"

[    23.679] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so

[    23.730] (II) Module nvidia: vendor="NVIDIA Corporation"

[    23.730]  compiled for 4.0.2, module version = 1.0.0

[    23.730]  Module class: X.Org Video Driver

[    23.744] (II) NVIDIA dlloader X Driver  390.138  Thu May 14 03:33:57 PDT 2020

[    23.744] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[    23.758] (II) Loading sub module "fb"

[    23.758] (II) LoadModule: "fb"

[    23.770] (II) Loading /usr/lib/xorg/modules/libfb.so

[    23.782] (II) Module fb: vendor="X.Org Foundation"

[    23.782]  compiled for 1.19.2, module version = 1.0.0

[    23.782]  ABI class: X.Org ANSI C Emulation, version 0.4

[    23.782] (II) Loading sub module "wfb"

[    23.782] (II) LoadModule: "wfb"

[    23.782] (II) Loading /usr/lib/xorg/modules/libwfb.so

[    23.786] (II) Module wfb: vendor="X.Org Foundation"

[    23.786]  compiled for 1.19.2, module version = 1.0.0

[    23.786]  ABI class: X.Org ANSI C Emulation, version 0.4

[    23.786] (II) Loading sub module "ramdac"

[    23.786] (II) LoadModule: "ramdac"

[    23.786] (II) Module "ramdac" already built-in

[    23.803] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32

[    23.803] (==) NVIDIA(0): RGB weight 888

[    23.803] (==) NVIDIA(0): Default visual is TrueColor

[    23.803] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)

[    23.804] (**) NVIDIA(0): Enabling 2D acceleration

[    23.804] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X

[    23.804] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X

[    23.804] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If

[    23.804] (EE) NVIDIA(0):     you continue to encounter problems, Please try

[    23.804] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.

[    24.551] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0

[    24.551] (--) NVIDIA(0):     CRT-0

[    24.551] (--) NVIDIA(0):     CRT-1

[    24.551] (--) NVIDIA(0):     DFP-0

[    24.551] (--) NVIDIA(0):     DFP-1 (boot)

[    24.553] (II) NVIDIA(0): NVIDIA GPU GeForce GT 620 (GF108) at PCI:1:0:0 (GPU-0)

[    24.553] (--) NVIDIA(0): Memory: 2097152 kBytes

[    24.553] (--) NVIDIA(0): VideoBIOS: 70.08.ae.00.00

[    24.553] (II) NVIDIA(0): Detected PCI Express Link width: 16X

[    24.555] (--) NVIDIA(GPU-0): CRT-0: disconnected

[    24.555] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock

[    24.555] (--) NVIDIA(GPU-0): 

[    24.570] (--) NVIDIA(GPU-0): DELL P2414H (CRT-1): connected

[    24.570] (--) NVIDIA(GPU-0): DELL P2414H (CRT-1): 400.0 MHz maximum pixel clock

[    24.570] (--) NVIDIA(GPU-0): 

[    24.572] (--) NVIDIA(GPU-0): DFP-0: disconnected

[    24.572] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS

[    24.572] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock

[    24.573] (--) NVIDIA(GPU-0): 

[    24.587] (--) NVIDIA(GPU-0): ViewSonic VG2448 (DFP-1): connected

[    24.587] (--) NVIDIA(GPU-0): ViewSonic VG2448 (DFP-1): Internal TMDS

[    24.587] (--) NVIDIA(GPU-0): ViewSonic VG2448 (DFP-1): 225.0 MHz maximum pixel clock

[    24.587] (--) NVIDIA(GPU-0): 

[    24.594] (==) NVIDIA(0): 

[    24.594] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"

[    24.594] (==) NVIDIA(0):     will be used as the requested mode.

[    24.594] (==) NVIDIA(0): 

[    24.594] (II) NVIDIA(0): Validated MetaModes:

[    24.594] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select,CRT-1:nvidia-auto-select"

[    24.594] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080

[    24.600] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config

[    24.600] (--) NVIDIA(0):     option

[    24.600] (--) Depth 24 pixmap format is 32 bpp

[    24.601] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory

[    24.601] (II) NVIDIA:     access.

[    24.603] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon

[    24.603] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X

[    24.603] (II) NVIDIA(0):     configuration option may not be set correctly.  When the

[    24.603] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will

[    24.603] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For

[    24.603] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and

[    24.603] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X

[    24.603] (II) NVIDIA(0):     Config Options in the README.

[    24.624] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select,CRT-1:nvidia-auto-select"

[    24.723] (==) NVIDIA(0): Disabling shared memory pixmaps

[    24.723] (==) NVIDIA(0): Backing store enabled

[    24.723] (==) NVIDIA(0): Silken mouse enabled

[    24.724] (**) NVIDIA(0): DPMS enabled

[    24.738] (II) Loading sub module "dri2"

[    24.738] (II) LoadModule: "dri2"

[    24.738] (II) Module "dri2" already built-in

[    24.738] (II) NVIDIA(0): [DRI2] Setup complete

[    24.738] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia

[    24.739] (--) RandR disabled

[    24.747] (II) SELinux: Disabled on system

[    24.748] (II) AIGLX: Screen 0 is not DRI2 capable

[    24.748] (EE) AIGLX: reverting to software rendering

[    25.148] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch)

[    25.148] (EE) GLX: could not load software renderer

[    25.148] (II) GLX: no usable GL providers found for screen 0

[    25.478] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[    25.478] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    25.478] (II) LoadModule: "libinput"

[    25.493] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    25.542] (II) Module libinput: vendor="X.Org Foundation"

[    25.542]  compiled for 1.19.0, module version = 0.23.0

[    25.542]  Module class: X.Org XInput Driver

[    25.542]  ABI class: X.Org XInput driver, version 24.1

[    25.542] (II) Using input driver 'libinput' for 'Power Button'

[    25.542] (**) Power Button: always reports core events

[    25.542] (**) Option "Device" "/dev/input/event5"

[    25.542] (**) Option "_source" "server/udev"

[    25.543] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    25.543] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    25.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5"

[    25.580] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    25.580] (**) Option "xkb_model" "pc105"

[    25.580] (**) Option "xkb_layout" "fr"

[    25.580] (**) Option "xkb_variant" "latin9"

[    25.613] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    25.613] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    25.614] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[    25.614] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    25.614] (II) Using input driver 'libinput' for 'Power Button'

[    25.614] (**) Power Button: always reports core events

[    25.614] (**) Option "Device" "/dev/input/event4"

[    25.614] (**) Option "_source" "server/udev"

[    25.614] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard

[    25.614] (II) input device 'Power Button', /dev/input/event4 is a keyboard

[    25.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4"

[    25.656] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[    25.656] (**) Option "xkb_model" "pc105"

[    25.656] (**) Option "xkb_layout" "fr"

[    25.656] (**) Option "xkb_variant" "latin9"

[    25.657] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard

[    25.657] (II) input device 'Power Button', /dev/input/event4 is a keyboard

[    25.658] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)

[    25.658] (II) No input driver specified, ignoring this device.

[    25.658] (II) This device may have been added with another device file.

[    25.658] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)

[    25.658] (II) No input driver specified, ignoring this device.

[    25.658] (II) This device may have been added with another device file.

[    25.659] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)

[    25.659] (II) No input driver specified, ignoring this device.

[    25.659] (II) This device may have been added with another device file.

[    25.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)

[    25.660] (II) No input driver specified, ignoring this device.

[    25.660] (II) This device may have been added with another device file.

[    25.661] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event0)

[    25.661] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"

[    25.661] (II) Using input driver 'libinput' for 'USB Optical Mouse'

[    25.661] (**) USB Optical Mouse: always reports core events

[    25.661] (**) Option "Device" "/dev/input/event0"

[    25.661] (**) Option "_source" "server/udev"

[    25.720] (II) input device 'USB Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse

[    25.720] (II) input device 'USB Optical Mouse', /dev/input/event0 is a pointer caps

[    25.760] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb2/2-4/2-4.3/2-4.3:1.0/0003:045E:0797.0001/input/input3/event0"

[    25.760] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)

[    25.760] (**) Option "AccelerationScheme" "none"

[    25.760] (**) USB Optical Mouse: (accel) selected scheme none/0

[    25.760] (**) USB Optical Mouse: (accel) acceleration factor: 2.000

[    25.760] (**) USB Optical Mouse: (accel) acceleration threshold: 4

[    25.820] (II) input device 'USB Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse

[    25.820] (II) input device 'USB Optical Mouse', /dev/input/event0 is a pointer caps

[    25.821] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)

[    25.821] (II) No input driver specified, ignoring this device.

[    25.821] (II) This device may have been added with another device file.

[    25.822] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)

[    25.823] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"

[    25.823] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'

[    25.823] (**) Logitech USB Keyboard: always reports core events

[    25.823] (**) Option "Device" "/dev/input/event1"

[    25.823] (**) Option "_source" "server/udev"

[    25.823] (II) input device 'Logitech USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard

[    25.823] (II) input device 'Logitech USB Keyboard', /dev/input/event1 is a keyboard

[    25.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb2/2-4/2-4.4/2-4.4:1.0/0003:046D:C328.0002/input/input4/event1"

[    25.852] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)

[    25.852] (**) Option "xkb_model" "pc105"

[    25.852] (**) Option "xkb_layout" "fr"

[    25.852] (**) Option "xkb_variant" "latin9"

[    25.853] (II) input device 'Logitech USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard

[    25.853] (II) input device 'Logitech USB Keyboard', /dev/input/event1 is a keyboard

[    25.854] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)

[    25.854] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"

[    25.854] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'

[    25.854] (**) Logitech USB Keyboard: always reports core events

[    25.854] (**) Option "Device" "/dev/input/event2"

[    25.854] (**) Option "_source" "server/udev"

[    25.855] (II) input device 'Logitech USB Keyboard', /dev/input/event2 is tagged by udev as: Keyboard

[    25.855] (II) input device 'Logitech USB Keyboard', /dev/input/event2 is a keyboard

[    25.888] (II) libinput: Logitech USB Keyboard: needs a virtual subdevice

[    25.888] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb2/2-4/2-4.4/2-4.4:1.1/0003:046D:C328.0003/input/input5/event2"

[    25.888] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: MOUSE, id 10)

[    25.888] (**) Option "AccelerationScheme" "none"

[    25.888] (**) Logitech USB Keyboard: (accel) selected scheme none/0

[    25.888] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000

[    25.888] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4

[    25.889] (II) input device 'Logitech USB Keyboard', /dev/input/event2 is tagged by udev as: Keyboard

[    25.889] (II) input device 'Logitech USB Keyboard', /dev/input/event2 is a keyboard

[    25.890] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7)

[    25.890] (II) No input driver specified, ignoring this device.

[    25.890] (II) This device may have been added with another device file.

[    25.890] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)

[    25.890] (II) No input driver specified, ignoring this device.

[    25.890] (II) This device may have been added with another device file.

[    25.891] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)

[    25.891] (II) No input driver specified, ignoring this device.

[    25.891] (II) This device may have been added with another device file.

[    25.891] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)

[    25.891] (II) No input driver specified, ignoring this device.

[    25.891] (II) This device may have been added with another device file.

[    25.892] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)

[    25.892] (II) No input driver specified, ignoring this device.

[    25.892] (II) This device may have been added with another device file.

[    25.893] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12)

[    25.893] (II) No input driver specified, ignoring this device.

[    25.893] (II) This device may have been added with another device file.

[    25.893] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event13)

[    25.893] (II) No input driver specified, ignoring this device.

[    25.893] (II) This device may have been added with another device file.

[    25.894] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)

[    25.894] (II) No input driver specified, ignoring this device.

[    25.894] (II) This device may have been added with another device file.

[    25.894] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)

[    25.894] (II) No input driver specified, ignoring this device.

[    25.894] (II) This device may have been added with another device file.

[    25.898] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"

[    25.898] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'

[    25.898] (**) Logitech USB Keyboard: always reports core events

[    25.898] (**) Option "Device" "/dev/input/event2"

[    25.898] (**) Option "_source" "_driver/libinput"

[    25.898] (II) libinput: Logitech USB Keyboard: is a virtual subdevice

[    25.898] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb2/2-4/2-4.4/2-4.4:1.1/0003:046D:C328.0003/input/input5/event2"

[    25.898] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)

[    25.898] (**) Option "xkb_model" "pc105"

[    25.898] (**) Option "xkb_layout" "fr"

[    25.898] (**) Option "xkb_variant" "latin9"

[    25.899] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)

[    30.813] (II) UnloadModule: "libinput"

[    30.813] (II) UnloadModule: "libinput"

[    30.813] (II) UnloadModule: "libinput"

[    30.814] (II) UnloadModule: "libinput"

[    30.814] (II) UnloadModule: "libinput"

[    30.814] (II) UnloadModule: "libinput"

[    31.245] (II) NVIDIA(GPU-0): Deleting GPU-0

[    31.246] (II) Server terminated successfully (0). Closing log file.

Je ne sais pas ce qu'il se passe.
J'ai utiliser juste VirtualBox et audacious et xrandr, rien fait d'autre.
J'ai reinstaller les drivers nvidia et ca remarche.

Dernière modification par sizy458 (20-04-2021 21:05:36)

Debian-facile

#1 13-12-2020 23:36:49

debian qui perd ses billes

#2 14-12-2020 04:06:26

Re : debian qui perd ses billes

#3 14-12-2020 22:29:29

Re : debian qui perd ses billes

#4 14-12-2020 22:45:43

Re : debian qui perd ses billes

#5 15-12-2020 06:37:46

Re : debian qui perd ses billes

#6 15-12-2020 14:53:37

Re : debian qui perd ses billes

#7 15-12-2020 19:48:34

Re : debian qui perd ses billes

#8 16-12-2020 20:52:49

Re : debian qui perd ses billes

#9 20-12-2020 19:17:46

Re : debian qui perd ses billes

#10 20-12-2020 19:59:02

Re : debian qui perd ses billes

#11 21-12-2020 21:18:55

Re : debian qui perd ses billes

#12 22-12-2020 09:26:06

Re : debian qui perd ses billes

#13 22-12-2020 20:44:36

Re : debian qui perd ses billes

#14 20-04-2021 21:04:54

Re : debian qui perd ses billes

Pied de page des forums