Debian Debian-France Debian-Facile Debian-fr.org Debian-fr.xyz Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 02-07-2021 16:20:13

sizy458
Membre
Distrib. : Debian Stretch
Noyau : 4.9.0-11-amd64
(G)UI : gnome
Inscription : 17-06-2018

graveur blu-ray impossible

Bonjour,
J'ai un nouveau graveur blu-ray externe USB , ca marchait trés bien avec mon graveur interne.
Quand je grave j'ai ceux-ci :


cdrskin -v dev=/dev/sr1 -dao /media/ciba/Elements/gravuretmp/ggyt.iso
 



cdrskin 1.4.6 : limited cdrecord compatibility wrapper for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given dev='/dev/sr1'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 1 burn_disc_blank "The drive holds a blank disc"
Current: BD-R sequential recording
Track 01: data  45006 MB        
Total size:    45006 MB (5120:48.18) = 23043464 sectors
Lout start:    45006 MB (5120:50/18) = 23043614 sectors
Starting to write CD/DVD at speed MAX in real SAO mode for single session.
Last chance to quit, starting real write in   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01:  195 of 45006 MB written (fifo 100%) [buf 100%]   0.7x.cdrskin: FAILURE : SCSI command 2Ah yielded host problem: 0x7 SG_ERR_DID_ERROR (Internal error detected in the host adapter)
cdrskin: FATAL : Lost connection to drive
cdrskin: FAILURE : Failed to synchronize drive cache. SCSI error : [0 00 00] (No error reported by SCSI transaction)

Track 01: Total bytes read/written: 204734464/204668928 (99936 sectors).
Writing  time:  101.647s
Cdrskin: fifo had 102047 puts and 99999 gets.
Cdrskin: fifo was 0 times empty and 4045 times full, min fill was 99%.
Min drive buffer fill was 100%
cdrskin: burning failed
cdrskin: FATAL : burning failed.
cdrskin: SORRY : Drive is already released


 




Comment résoudre ce pb de gravure  ?

Merci .

Dernière modification par sizy458 (02-07-2021 16:24:23)

Hors ligne

#2 03-07-2021 11:14:34

raleur
Membre
Inscription : 03-10-2014

Re : graveur blu-ray impossible

Tu as regardé dans les logs du noyau /var/log/kern.log au moment de l'erreur ?
Connexion USB 2 ou 3 ?
Alimentation propre ou par le bus USB ?

Dernière modification par raleur (03-07-2021 11:15:30)


Il vaut mieux montrer que raconter.

Hors ligne

#3 03-07-2021 14:47:10

sizy458
Membre
Distrib. : Debian Stretch
Noyau : 4.9.0-11-amd64
(G)UI : gnome
Inscription : 17-06-2018

Re : graveur blu-ray impossible

Connexion USB 3.0 et alimentation propre.
Les log:


ul  2 17:09:12 persodebian kernel: [ 6294.564078] usb 2-2: USB disconnect, device number 14
Jul  2 17:09:16 persodebian kernel: [ 6298.512770] usb 2-2: new SuperSpeed USB device number 15 using xhci_hcd
Jul  2 17:09:16 persodebian kernel: [ 6298.535884] usb 2-2: New USB device found, idVendor=13fd, idProduct=3940
Jul  2 17:09:16 persodebian kernel: [ 6298.535888] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul  2 17:09:16 persodebian kernel: [ 6298.535891] usb 2-2: Product:  BD-RE BU40N    
Jul  2 17:09:16 persodebian kernel: [ 6298.535894] usb 2-2: Manufacturer: HL-DT-ST
Jul  2 17:09:16 persodebian kernel: [ 6298.535896] usb 2-2: SerialNumber: 4D4F394B433739313933312020202020
Jul  2 17:09:16 persodebian kernel: [ 6298.538345] usb-storage 2-2:1.0: USB Mass Storage device detected
Jul  2 17:09:16 persodebian kernel: [ 6298.538464] usb-storage 2-2:1.0: Quirks match for vid 13fd pid 3940: 2000020
Jul  2 17:09:16 persodebian kernel: [ 6298.538538] scsi host10: usb-storage 2-2:1.0
Jul  2 17:09:17 persodebian kernel: [ 6299.548927] scsi 10:0:0:0: CD-ROM            HL-DT-ST BD-RE BU40N      1.04 PQ: 0 ANSI: 0
Jul  2 17:09:17 persodebian kernel: [ 6299.551197] sr 10:0:0:0: [sr2] scsi3-mmc drive: 153x/153x writer dvd-ram cd/rw xa/form2 cdda tray
Jul  2 17:09:17 persodebian kernel: [ 6299.551388] sr 10:0:0:0: Attached scsi CD-ROM sr2
Jul  2 17:09:17 persodebian kernel: [ 6299.551475] sr 10:0:0:0: Attached scsi generic sg4 type 5
Jul  2 17:10:28 persodebian kernel: [ 6370.564143] usb 2-2: USB disconnect, device number 15
Jul  2 17:10:28 persodebian kernel: [ 6370.564824] sr 10:0:0:0: [sr2] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Jul  2 17:10:28 persodebian kernel: [ 6370.564831] sr 10:0:0:0: [sr2] tag#0 CDB: Start/Stop Unit 1b 00 00 00 02 00 00 00 00 00 00 00
Jul  2 17:10:43 persodebian kernel: [ 6385.440020] usb 1-2: new high-speed USB device number 71 using xhci_hcd
Jul  2 17:10:43 persodebian kernel: [ 6386.304883] usb 2-2: new SuperSpeed USB device number 16 using xhci_hcd
Jul  2 17:10:43 persodebian kernel: [ 6386.327831] usb 2-2: New USB device found, idVendor=13fd, idProduct=3940
Jul  2 17:10:43 persodebian kernel: [ 6386.327833] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul  2 17:10:43 persodebian kernel: [ 6386.327834] usb 2-2: Product:  BD-RE BU40N    
Jul  2 17:10:43 persodebian kernel: [ 6386.327835] usb 2-2: Manufacturer: HL-DT-ST
Jul  2 17:10:43 persodebian kernel: [ 6386.327836] usb 2-2: SerialNumber: 4D4F394B433739313933312020202020
Jul  2 17:10:43 persodebian kernel: [ 6386.330007] usb-storage 2-2:1.0: USB Mass Storage device detected
Jul  2 17:10:43 persodebian kernel: [ 6386.330103] usb-storage 2-2:1.0: Quirks match for vid 13fd pid 3940: 2000020
Jul  2 17:10:43 persodebian kernel: [ 6386.330130] scsi host10: usb-storage 2-2:1.0
Jul  2 17:10:45 persodebian kernel: [ 6387.359287] scsi 10:0:0:0: CD-ROM            HL-DT-ST BD-RE BU40N      1.04 PQ: 0 ANSI: 0
Jul  2 17:10:45 persodebian kernel: [ 6387.460654] sr 10:0:0:0: [sr2] scsi3-mmc drive: 0x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jul  2 17:10:45 persodebian kernel: [ 6387.460809] sr 10:0:0:0: Attached scsi CD-ROM sr2
Jul  2 17:10:45 persodebian kernel: [ 6387.460921] sr 10:0:0:0: Attached scsi generic sg4 type 5
 

Hors ligne

#4 04-07-2021 10:51:24

raleur
Membre
Inscription : 03-10-2014

Re : graveur blu-ray impossible

On voit deux déconnexions du graveur à 17:09:12 et 17:10:28. Sont-elles de ton fait ?

Il vaut mieux montrer que raconter.

Hors ligne

#5 04-07-2021 12:47:50

jpt
Membre
Distrib. : Debian 10.8
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : graveur blu-ray impossible

Bonjour,

il faudrait peut-être se concentrer sur

sizy458 a écrit :

cdrskin: FAILURE : SCSI command 2Ah yielded host problem: 0x7 SG_ERR_DID_ERROR (Internal error detected in the host adapter)

et une recherche fait remonter de la lecture :

A DID_ERROR typically indicates the driver software detected some type of hardware error via an anomaly within the returned data from the HBA.

A hardware or san-based issue is present within the storage subsystem such that received fibre channel response frames contain invalid or conflicting information that the driver is not able to use or reconcile.

Please review the systems hardware, switch error counters, etc. to see if there is any indication of where the issue might lie. The most likely candidate is the HBA itself.

source
hba : https://fr.wikipedia.org/wiki/Contr%C3% … 4te_de_bus

et aussi

So we have as main suspects for the problem:
- The drive's inner electrics and mechanics.
- The power supply of the drive's box.
- The converter in the box from the drive's own bus controller to USB.  (Ye olde Parallel SCSI, old IDE, and SATA are candidates.)
- The USB controller in your computer (and its internal connections).
...
I now have a workaround for my problem with the Teac W5000U DVD drive
and 64 bit computer. Was somewhat hard to find, but I obtained a USB
controller card new enough to be PCI express but old enough not to
support USB 3.0. So far, have not suffered any more controller resets.

The card uses the ehci rather than xhci drivers. This suggests but does
not prove some sort of incompatibility between the DVD drive and xhci.
Since xhci is what everyone is supposed to be using these days, this
qualifies more as a workaround than a solution. But it is good enough
for me.

source (ça commence en bas de la page).


AMD Ryzen3 3200G sur Gigabyte B450M & Make Love Not War

En ligne

Pied de page des forums