Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 04-05-2022 15:24:15

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

[resolu] gpu RX6500XT sous sid (bookworm) qui freeze

Bonjour
impossible de démarrer sur cette carte graphique
a priori le souci est sur l'absence de /dev/dri/card0
le firmware est correct il me semble


beige_goby_*.bin
 


il y a 12 ".bin" a glisser dans /usr/lib/firmware/amdgpu/  au total
je sais pas si un souci de kernel ou de mesa ou du driver

impossible de démarrer aussi avec 2 cartes (une RX550 en position 0 et la RX6500XT en 1)
en mode console , firmware et drm semble correct
mais le serveur X fait une erreur fatale a cause de l'absence de /dev/dri/card0

je me doute que le matériel trop récent pour debian , mais pas trouvé la ou les causes
le noyau sous sid


uname -a
Linux amdtr4 5.17.0-1-amd64 #1 SMP PREEMPT Debian 5.17.3-1 (2022-04-18) x86_64 GNU/Linux
 


pour les logs je retrouve la mémoire 4Go , le bus pour moi PCIe 3 en X4 (la carte est en PCIe 4 X4 en natif) et aucune erreur particulière dans le syslog.
on fera un nouvel essai quand le firmware sera mit a jour sous sid

remarque : avec nomodeset je démarre sans problème avec une ou deux cartes mais bon aucun intérêt  . (en basse résolution ).

Dernière modification par robert2a (06-05-2022 16:11:00)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#2 04-05-2022 15:56:01

Debian Alain
Membre
Lieu : Bretagne
Distrib. : unstable sid / bullseye (stable)
Noyau : Linux sid 5.18.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

bonjour robert2a   smile  smile  smile

je sais pas  si çà pourra t'aider .

installe lshw et lance :

lshw -numeric -c display



amicalement ,

alain .

coyotus.png

Dernière modification par Debian Alain (04-05-2022 15:59:55)

Hors ligne

#3 04-05-2022 17:52:22

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze


journalctl -b -r -p err
mai 04 17:44:27 kabylake1 pulseaudio[1054]: Error opening PCM device front:0: Aucun fichier ou dossier de ce type
mai 04 17:44:27 kabylake1 lightdm[1112]: gkr-pam: unable to locate daemon control file
mai 04 17:44:05 kabylake1 kernel: amdgpu 0000:03:00.0: amdgpu: Fatal error during GPU init
mai 04 17:44:05 kabylake1 kernel: amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_init failed
mai 04 17:44:05 kabylake1 kernel: [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* sw_init of IP block <psp> failed -2
mai 04 17:44:05 kabylake1 kernel: [drm:psp_sw_init [amdgpu]] *ERROR* Failed to load psp firmware!
mai 04 17:44:05 kabylake1 kernel: amdgpu 0000:03:00.0: amdgpu: failed to init sos firmware
mai 04 17:44:05 kabylake1 kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
mai 04 17:44:05 kabylake1 kernel: amdgpu 0000:03:00.0: firmware: failed to load amdgpu/beige_goby_sos.bin (-2)
 




lshw -numeric -c display
  *-display NON-RÉCLAMÉ    
       description: VGA compatible controller
       produit: Navi 24 [Radeon RX 6400 / 6500 XT] [1002:743F]
       fabriquant: Advanced Micro Devices, Inc. [AMD/ATI] [1002]
       identifiant matériel: 0
       information bus: pci@0000:03:00.0
       version: c1
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm pciexpress msi vga_controller cap_list
       configuration: latency=0
       ressources: mémoire:c0000000-cfffffff mémoire:d0000000-d01fffff portE/S:e000(taille=256) mémoire:df000000-df0fffff mémoire:df100000-df11ffff
  *-display
       description: VGA compatible controller
       produit: HD Graphics 630 [8086:5912]
       fabriquant: Intel Corporation [8086]
       identifiant matériel: 2
       information bus: pci@0000:00:02.0
       nom logique: /dev/fb0
       version: 04
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom fb
       configuration: depth=32 driver=i915 latency=0 resolution=1440,900
       ressources: irq:144 mémoire:de000000-deffffff mémoire:b0000000-bfffffff portE/S:f000(taille=64) mémoire:c0000-dffff
 



je l'ai mit sur une machine intel ( amd a rocm installé en partiel) et puis en testing (pas sid) et sans le firmware a jour


apt policy firmware-amd-graphics
firmware-amd-graphics:
  Installé : 20210818-1
  Candidat : 20210818-1
 Table de version :
 *** 20210818-1 500
        500 https://deb.debian.org/debian bookworm/non-free amd64 Packages
        100 /var/lib/dpkg/status
 




uname -a
Linux kabylake1 5.17.0-1-amd64 #1 SMP PREEMPT Debian 5.17.3-1 (2022-04-18) x86_64 GNU/Linux
 




lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 05)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #17 (rev f0)
00:1b.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #21 (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #1 (rev f0)
00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation 200 Series PCH LPC Controller (Z270)
00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
01:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev c1)
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 24 [Radeon RX 6400 / 6500 XT] (rev c1)
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller
05:00.0 SATA controller: Kingston Technology Company, Inc. HyperX Predator PCIe AHCI SSD (rev 10)
07:00.0 USB controller: ASMedia Technology Inc. ASM2142 USB 3.1 Host Controller
 




dmesg | grep firmware
[    0.068207] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    3.493025] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[    3.493643] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.496450] amdgpu 0000:03:00.0: firmware: failed to load amdgpu/beige_goby_sos.bin (-2)
[    3.496621] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[    3.496793] amdgpu 0000:03:00.0: Direct firmware load for amdgpu/beige_goby_sos.bin failed with error -2
[    3.496806] amdgpu 0000:03:00.0: amdgpu: failed to init sos firmware
[    3.496924] [drm:psp_sw_init [amdgpu]] *ERROR* Failed to load psp firmware!
 





dmesg | grep drm
[    2.360042] systemd[1]: Starting Load Kernel Module drm...
[    2.385323] ACPI: bus type drm_connector registered
[    2.385872] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    2.386032] systemd[1]: Finished Load Kernel Module drm.
[    3.123041] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    3.123197] i915 0000:00:02.0: [drm] Transparent Hugepage mode 'huge=within_size'
[    3.139908] i915 0000:00:02.0: [drm] [ENCODER:94:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[    3.139910] i915 0000:00:02.0: [drm] [ENCODER:111:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[    3.167192] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    3.189701] [drm] amdgpu kernel modesetting enabled.
[    3.198970] fbcon: i915drmfb (fb0) is primary device
[    3.231653] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.332294] [drm] initializing kernel modesetting (BEIGE_GOBY 0x1002:0x743F 0x1DA2:0xE457 0xC1).
[    3.332337] [drm] register mmio base: 0xDF000000
[    3.332340] [drm] register mmio size: 1048576
[    3.333717] [drm] add ip block number 0 <nv_common>
[    3.333724] [drm] add ip block number 1 <gmc_v10_0>
[    3.333728] [drm] add ip block number 2 <navi10_ih>
[    3.333730] [drm] add ip block number 3 <psp>
[    3.333733] [drm] add ip block number 4 <smu>
[    3.333736] [drm] add ip block number 5 <dm>
[    3.333739] [drm] add ip block number 6 <gfx_v10_0>
[    3.333742] [drm] add ip block number 7 <sdma_v5_2>
[    3.333744] [drm] add ip block number 8 <vcn_v3_0>
[    3.363149] [drm] VCN(0) decode is enabled in VM mode
[    3.363170] [drm] GPU posting now...
[    3.363187] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.363202] [drm] Detected VRAM RAM=4080M, BAR=256M
[    3.363203] [drm] RAM width 64bits GDDR6
[    3.363221] [drm] amdgpu: 4080M of VRAM memory ready
[    3.363222] [drm] amdgpu: 4080M of GTT memory ready.
[    3.363228] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.363307] [drm] PCIE GART of 512M enabled (table at 0x0000008000000000).
[    3.493643] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.496924] [drm:psp_sw_init [amdgpu]] *ERROR* Failed to load psp firmware!
[    3.498376] [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* sw_init of IP block <psp> failed -2
[    3.505088] [drm] amdgpu: ttm finalized
 



tu a de quoi faire maintenant   wink

ps: la machine restera a l'arret le temps que les mises a jour entre
avec le bon firmware les ventilos sont a l'arret au repos , mais X plante (la les ventilateurs sont a fond )

Dernière modification par robert2a (04-05-2022 18:06:50)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#4 04-05-2022 18:47:31

Debian Alain
Membre
Lieu : Bretagne
Distrib. : unstable sid / bullseye (stable)
Noyau : Linux sid 5.18.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

@robert2a  smile   smile   smile

bon , je t'ai induit en erreur , je pensais que le firmware était prêt .
je me suis trompé .

trouvé ceci :

https://www.tomshardware.fr/amd-glisse- … e-navi-24/

https://git.kernel.org/pub/scm/linux/ke … mware.git/

avec ces firmwares là , çà foire aussi ?

amicalement ,

alain .

coyotus.png

Dernière modification par Debian Alain (04-05-2022 18:55:07)

Hors ligne

#5 04-05-2022 19:05:11

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

le deuxième lien ou j'ai récupéré les .bin pour cette carte , que j'ai glissé dans /lib/firmware/amdgpu (qui est un lien vers /usr/lib/firmware/amdgpu ).
je pense pas avoir fait d'erreur
pris l'archive la plus récente

Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#6 04-05-2022 19:33:57

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

ceci est un bout du syslog sur le threadripper , il semble que tout va bien (avec le firmware debian modifié) mais ce n'est pas le cas


May  4 14:34:19 amdtr4 kernel: [    8.505546] [drm] amdgpu kernel modesetting enabled.
May  4 14:34:19 amdtr4 kernel: [    8.506480] MCE: In-kernel MCE decoding enabled.
May  4 14:34:19 amdtr4 kernel: [    8.506749] amdgpu: Ignoring ACPI CRAT on non-APU system
May  4 14:34:19 amdtr4 kernel: [    8.506754] amdgpu: Virtual CRAT table created for CPU
May  4 14:34:19 amdtr4 kernel: [    8.506772] amdgpu: Topology: Add CPU node
May  4 14:34:19 amdtr4 kernel: [    8.506946] checking generic (c0000000 300000) vs hw (c0000000 10000000)
May  4 14:34:19 amdtr4 kernel: [    8.508651] checking generic (c0000000 300000) vs hw (c0000000 10000000)
May  4 14:34:19 amdtr4 kernel: [    8.508655] fb0: switching to amdgpu from EFI VGA
May  4 14:34:19 amdtr4 kernel: [    8.508777] Console: switching to colour dummy device 80x25
May  4 14:34:19 amdtr4 kernel: [    8.508861] amdgpu 0000:0b:00.0: vgaarb: deactivate vga console
May  4 14:34:19 amdtr4 kernel: [    8.509038] [drm] initializing kernel modesetting (BEIGE_GOBY 0x1002:0x743F 0x1DA2:0xE457 0xC1).
May  4 14:34:19 amdtr4 kernel: [    8.509043] amdgpu 0000:0b:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
May  4 14:34:19 amdtr4 kernel: [    8.509055] [drm] register mmio base: 0xD9900000
May  4 14:34:19 amdtr4 kernel: [    8.509056] [drm] register mmio size: 1048576
May  4 14:34:19 amdtr4 kernel: [    8.510397] [drm] add ip block number 0 <nv_common>
May  4 14:34:19 amdtr4 kernel: [    8.510399] [drm] add ip block number 1 <gmc_v10_0>
May  4 14:34:19 amdtr4 kernel: [    8.510400] [drm] add ip block number 2 <navi10_ih>
May  4 14:34:19 amdtr4 kernel: [    8.510401] [drm] add ip block number 3 <psp>
May  4 14:34:19 amdtr4 kernel: [    8.510402] [drm] add ip block number 4 <smu>
May  4 14:34:19 amdtr4 kernel: [    8.510403] [drm] add ip block number 5 <dm>
May  4 14:34:19 amdtr4 kernel: [    8.510405] [drm] add ip block number 6 <gfx_v10_0>
May  4 14:34:19 amdtr4 kernel: [    8.510406] [drm] add ip block number 7 <sdma_v5_2>
May  4 14:34:19 amdtr4 kernel: [    8.510407] [drm] add ip block number 8 <vcn_v3_0>
May  4 14:34:19 amdtr4 kernel: [    8.510429] amdgpu 0000:0b:00.0: No more image in the PCI ROM
May  4 14:34:19 amdtr4 kernel: [    8.510450] amdgpu 0000:0b:00.0: amdgpu: Fetched VBIOS from ROM BAR
May  4 14:34:19 amdtr4 kernel: [    8.510452] amdgpu: ATOM BIOS: 113-D6320100-S06
May  4 14:34:19 amdtr4 kernel: [    8.510463] [drm] VCN(0) decode is enabled in VM mode
May  4 14:34:19 amdtr4 kernel: [    8.510501] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
May  4 14:34:19 amdtr4 kernel: [    8.510514] amdgpu 0000:0b:00.0: BAR 2: releasing [mem 0xd0000000-0xd01fffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510517] amdgpu 0000:0b:00.0: BAR 0: releasing [mem 0xc0000000-0xcfffffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510534] pcieport 0000:0a:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510536] pcieport 0000:09:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510538] pcieport 0000:00:03.1: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510546] pcieport 0000:00:03.1: BAR 15: assigned [mem 0x10000000000-0x1017fffffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510549] pcieport 0000:09:00.0: BAR 15: assigned [mem 0x10000000000-0x1017fffffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510551] pcieport 0000:0a:00.0: BAR 15: assigned [mem 0x10000000000-0x1017fffffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510554] amdgpu 0000:0b:00.0: BAR 0: assigned [mem 0x10000000000-0x100ffffffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510562] amdgpu 0000:0b:00.0: BAR 2: assigned [mem 0x10100000000-0x101001fffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510570] pcieport 0000:00:03.1: PCI bridge to [bus 09-0b]
May  4 14:34:19 amdtr4 kernel: [    8.510573] pcieport 0000:00:03.1:   bridge window [io  0x1000-0x1fff]
May  4 14:34:19 amdtr4 kernel: [    8.510576] pcieport 0000:00:03.1:   bridge window [mem 0xd9900000-0xd9bfffff]
May  4 14:34:19 amdtr4 kernel: [    8.510578] pcieport 0000:00:03.1:   bridge window [mem 0x10000000000-0x1017fffffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510581] pcieport 0000:09:00.0: PCI bridge to [bus 0a-0b]
May  4 14:34:19 amdtr4 kernel: [    8.510583] pcieport 0000:09:00.0:   bridge window [io  0x1000-0x1fff]
May  4 14:34:19 amdtr4 kernel: [    8.510587] pcieport 0000:09:00.0:   bridge window [mem 0xd9900000-0xd9afffff]
May  4 14:34:19 amdtr4 kernel: [    8.510590] pcieport 0000:09:00.0:   bridge window [mem 0x10000000000-0x1017fffffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510595] pcieport 0000:0a:00.0: PCI bridge to [bus 0b]
May  4 14:34:19 amdtr4 kernel: [    8.510597] pcieport 0000:0a:00.0:   bridge window [io  0x1000-0x1fff]
May  4 14:34:19 amdtr4 kernel: [    8.510601] pcieport 0000:0a:00.0:   bridge window [mem 0xd9900000-0xd9afffff]
May  4 14:34:19 amdtr4 kernel: [    8.510604] pcieport 0000:0a:00.0:   bridge window [mem 0x10000000000-0x1017fffffff 64bit pref]
May  4 14:34:19 amdtr4 kernel: [    8.510628] amdgpu 0000:0b:00.0: amdgpu: VRAM: 4080M 0x0000008000000000 - 0x00000080FEFFFFFF (4080M used)
May  4 14:34:19 amdtr4 kernel: [    8.510630] amdgpu 0000:0b:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
May  4 14:34:19 amdtr4 kernel: [    8.510632] amdgpu 0000:0b:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
May  4 14:34:19 amdtr4 kernel: [    8.510641] [drm] Detected VRAM RAM=4080M, BAR=4096M
May  4 14:34:19 amdtr4 kernel: [    8.510642] [drm] RAM width 64bits GDDR6
May  4 14:34:19 amdtr4 kernel: [    8.510708] [drm] amdgpu: 4080M of VRAM memory ready
May  4 14:34:19 amdtr4 kernel: [    8.510709] [drm] amdgpu: 4080M of GTT memory ready.
May  4 14:34:19 amdtr4 kernel: [    8.510717] [drm] GART: num cpu pages 131072, num gpu pages 131072
May  4 14:34:19 amdtr4 kernel: [    8.510830] [drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
May  4 14:34:19 amdtr4 kernel: [    8.511751] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/beige_goby_sos.bin
May  4 14:34:19 amdtr4 kernel: [    8.512351] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/beige_goby_ta.bin
May  4 14:34:19 amdtr4 kernel: [    8.512356] amdgpu 0000:0b:00.0: amdgpu: PSP runtime database doesn't exist
 



je connais pas ce "PSP" sur les logs .


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#7 04-05-2022 20:09:47

Debian Alain
Membre
Lieu : Bretagne
Distrib. : unstable sid / bullseye (stable)
Noyau : Linux sid 5.18.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

je te donne les liens que j'ai trouvé .

malheureusement , pas de réponses .

sauf peut être un qui a passé à manjaro .

https://forums.gentoo.org/viewtopic-p-8 … 020e772a66

https://gitlab.freedesktop.org/drm/amd/-/issues/1795

https://www.reddit.com/r/linux4noobs/co … he_system/

amicalement ,

alain .

coyotus.png

Hors ligne

#8 05-05-2022 08:28:28

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

Bonjour
on dirait que cela est correct  : card0 =intel ;  card1 = amd


[     5.254] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/drm/card1 /dev/dri/card1
[     5.254] (II) config/udev: Adding drm device (/dev/dri/card1)
[     5.254] (II) xfree86: Adding drm device (/dev/dri/card1)
[     5.254] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/drm/card1
[     5.255] (II) LoadModule: "modesetting"
[     5.255] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.256] (II) Module modesetting: vendor="X.Org Foundation"
[     5.256]  compiled for 1.21.1.3, module version = 1.21.1
[     5.256]  Module class: X.Org Video Driver
[     5.256]  ABI class: X.Org Video Driver, version 25.2
[     5.256] (II) UnloadModule: "modesetting"
[     5.256] (II) Unloading modesetting
[     5.256] (II) Failed to load module "modesetting" (already loaded, 0)
[     5.256] (II) modeset(G0): using drv /dev/dri/card1
[     5.256] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[     5.256] (==) modeset(G0): RGB weight 888
[     5.256] (==) modeset(G0): Default visual is TrueColor
[     5.256] (II) Loading sub module "glamoregl"
[     5.256] (II) LoadModule: "glamoregl"
[     5.257] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.257] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.257]  compiled for 1.21.1.3, module version = 1.0.1
[     5.257]  ABI class: X.Org ANSI C Emulation, version 0.4
[     5.290] (II) modeset(G0): glamor X acceleration enabled on AMD BEIGE_GOBY (DRM 3.44.0, 5.17.0-1-amd64, LLVM 13.0.1)
[     5.290] (II) modeset(G0): glamor initialized
[     5.290] (II) modeset(G0): Output DP-1-2 has no monitor section
[     5.290] (II) modeset(G0): Output HDMI-1-4 has no monitor section
[     5.291] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[     5.291] (**) modeset(G0): Display dimensions: (400, 250) mm
[     5.291] (**) modeset(G0): DPI set to (65, 78)
[     5.291] (II) Loading sub module "fb"
[     5.291] (II) LoadModule: "fb"
[     5.291] (II) Module "fb" already built-in
[     5.422] (==) modeset(G0): Backing store enabled
[     5.422] (==) modeset(G0): Silken mouse enabled
[     5.422] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[     5.422] (==) modeset(G0): DPMS enabled
[     5.422] (II) modeset(G0): [DRI2] Setup complete
[     5.422] (II) modeset(G0): [DRI2]   DRI driver: radeonsi
[     5.422] (II) modeset(G0): [DRI2]   VDPAU driver: radeonsi
[     5.422] (II) modeset(G0): Damage tracking initialized
[     5.423] xf86: found device 2
 



donc sur bookworm a jour avec LLVM13 , et ajout des binaires dans /usr/lib/firmware/amdgpu/


journalctl -b -r -p err
mai 05 08:08:07 kabylake1 pulseaudio[1032]: Error opening PCM device front:0: Aucun fichier ou dossier de ce type
mai 05 08:08:07 kabylake1 lightdm[1119]: gkr-pam: unable to locate daemon control file
 



dmesg | grep drm
[    2.359122] systemd[1]: Starting Load Kernel Module drm...
[    2.386141] ACPI: bus type drm_connector registered
[    2.386606] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    2.386750] systemd[1]: Finished Load Kernel Module drm.
[    3.379617] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    3.380263] i915 0000:00:02.0: [drm] Transparent Hugepage mode 'huge=within_size'
[    3.431510] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.478510] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    3.493122] [drm] amdgpu kernel modesetting enabled.
[    3.493680] [drm] initializing kernel modesetting (BEIGE_GOBY 0x1002:0x743F 0x1DA2:0xE457 0xC1).
[    3.493696] [drm] register mmio base: 0xDF000000
[    3.493697] [drm] register mmio size: 1048576
[    3.495158] [drm] add ip block number 0 <nv_common>
[    3.495160] [drm] add ip block number 1 <gmc_v10_0>
[    3.495161] [drm] add ip block number 2 <navi10_ih>
[    3.495162] [drm] add ip block number 3 <psp>
[    3.495163] [drm] add ip block number 4 <smu>
[    3.495165] [drm] add ip block number 5 <dm>
[    3.495166] [drm] add ip block number 6 <gfx_v10_0>
[    3.495167] [drm] add ip block number 7 <sdma_v5_2>
[    3.495168] [drm] add ip block number 8 <vcn_v3_0>
[    3.505393] fbcon: i915drmfb (fb0) is primary device
[    3.527655] [drm] VCN(0) decode is enabled in VM mode
[    3.527677] [drm] GPU posting now...
[    3.527694] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.527708] [drm] Detected VRAM RAM=4080M, BAR=256M
[    3.527709] [drm] RAM width 64bits GDDR6
[    3.527725] [drm] amdgpu: 4080M of VRAM memory ready
[    3.527726] [drm] amdgpu: 4080M of GTT memory ready.
[    3.527732] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.527808] [drm] PCIE GART of 512M enabled (table at 0x0000008000000000).
[    3.535575] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    4.928638] [drm] Loading DMUB firmware via PSP: version=0x0202000C
[    4.933082] [drm] use_doorbell being set to: [true]
[    4.934156] [drm] Found VCN firmware Version ENC: 1.18 DEC: 2 VEP: 0 Revision: 14
[    5.001019] [drm] reserve 0xa00000 from 0x80fe000000 for PSP TMR
[    5.148463] [drm] Display Core initialized with v3.2.167!
[    5.149537] [drm] DMUB hardware initialized: version=0x0202000C
[    5.170938] [drm] kiq ring mec 2 pipe 1 q 0
[    5.173197] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    5.175532] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:03:00.0 on minor 1
[    5.176791] amdgpu 0000:03:00.0: [drm] Cannot find any crtc or sizes
[   12.197980] [drm] free PSP TMR buffer
[   20.352494] [drm] PCIE GART of 512M enabled (table at 0x0000008000000000).
[   20.352506] [drm] PSP is resuming...
[   20.420222] [drm] reserve 0xa00000 from 0x800f400000 for PSP TMR
[   20.533596] [drm] DMUB hardware initialized: version=0x0202000C
[   20.565125] [drm] kiq ring mec 2 pipe 1 q 0
[   20.567495] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[   20.570687] amdgpu 0000:03:00.0: [drm] Cannot find any crtc or sizes
[   20.570694] amdgpu 0000:03:00.0: [drm] Cannot find any crtc or sizes
[   28.164123] [drm] free PSP TMR buffer
 



dmesg | grep firmware
[    0.068161] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    3.431073] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[    3.431510] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.528686] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_sos.bin
[    3.529190] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_ta.bin
[    4.928214] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_smc.bin
[    4.928634] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_dmcub.bin
[    4.928638] [drm] Loading DMUB firmware via PSP: version=0x0202000C
[    4.929220] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_pfp.bin
[    4.929839] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_me.bin
[    4.930373] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_ce.bin
[    4.930806] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_rlc.bin
[    4.931375] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_mec.bin
[    4.931966] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_mec2.bin
[    4.933068] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_sdma.bin
[    4.934152] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_vcn.bin
[    4.934156] [drm] Found VCN firmware Version ENC: 1.18 DEC: 2 VEP: 0 Revision: 14
[    4.934163] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
 



donc a priori bien un souci sur sid  "et ou"  sur ma machine AMD
je démarre avec l'écran sur la carte RX6500XT pour confirmer que tout est correct.


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#9 05-05-2022 09:17:34

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

j'ai un souci avec lightdm aussi au démarrage
j'ai réussi a arriver jusque sur le bureau en mode dépannage => mdp root => puis ctrl+D.


glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: AMD (0x1002)
    Device: AMD BEIGE_GOBY (DRM 3.44.0, 5.17.0-1-amd64, LLVM 13.0.1) (0x743f)
    Version: 21.3.8
    Accelerated: yes
    Video memory: 4096MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.6
    Max compat profile version: 4.6
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
    VBO free memory - total: 3997 MB, largest block: 3997 MB
    VBO free aux. memory - total: 4059 MB, largest block: 4059 MB
    Texture free memory - total: 3997 MB, largest block: 3997 MB
    Texture free aux. memory - total: 4059 MB, largest block: 4059 MB
    Renderbuffer free memory - total: 3997 MB, largest block: 3997 MB
    Renderbuffer free aux. memory - total: 4059 MB, largest block: 4059 MB
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 4096 MB
    Total available memory: 8176 MB
    Currently available dedicated video memory: 3997 MB
OpenGL vendor string: AMD
OpenGL renderer string: AMD BEIGE_GOBY (DRM 3.44.0, 5.17.0-1-amd64, LLVM 13.0.1)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 21.3.8
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 21.3.8
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 21.3.8
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
 


a priori toujours ce souci "/dev/dri/card0" absent


journalctl -b -r -p err
mai 05 08:52:40 kabylake1 pulseaudio[1070]: Error opening PCM device front:0: Aucun fichier ou dossier de ce type
mai 05 08:52:40 kabylake1 lightdm[1145]: gkr-pam: unable to locate daemon control file
 



ls /dev/dri/
by-path  card0  renderD128
 



le gpu intel est désactivé , trouvé un cordon HDMI => DVI (l'écran n'a que VGA ou DVI comme entrée )
quand le démarrage bug


[     5.485] (EE) open /dev/fb0: No such file or directory
[     5.485] vesa: Ignoring device with a bound kernel driver
[     5.485] (EE) Screen 0 deleted because of no matching config section.
[     5.485] (II) UnloadModule: "modesetting"
[     5.485] (EE) Screen 0 deleted because of no matching config section.
[     5.485] (II) UnloadModule: "fbdev"
[     5.485] (II) UnloadSubModule: "fbdevhw"
[     5.485] (EE) Screen 0 deleted because of no matching config section.
[     5.485] (II) UnloadModule: "vesa"
[     5.485] (EE) Device(s) detected, but none match those in the config file.
[     5.485] (EE)
Fatal server error:
[     5.485] (EE) no screens found(EE)
[     5.485] (EE)
Please consult the The X.Org Foundation support
   at http://wiki.x.org
 for help.
[     5.485] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     5.485] (EE)
[     5.485] (EE) Server terminated with error (1). Closing log file.
 



roll


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#10 05-05-2022 09:46:53

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

les binaires ajoutés au firmware de debian


 beige_goby_ce.bin
 beige_goby_dmcub.bin
 beige_goby_me.bin
 beige_goby_mec2.bin
 beige_goby_mec.bin
 beige_goby_pfp.bin
 beige_goby_rlc.bin
 beige_goby_sdma.bin
 beige_goby_smc.bin
 beige_goby_sos.bin
 beige_goby_ta.bin
 beige_goby_vcn.bin
 




sensors
amdgpu-pci-0300
Adapter: PCI adapter
vddgfx:      700.00 mV
fan1:           0 RPM  (min =    0 RPM, max = 3300 RPM)
edge:         +30.0°C  (crit = +105.0°C, hyst = -273.1°C)
                       (emerg = +110.0°C)
junction:     +31.0°C  (crit = +105.0°C, hyst = -273.1°C)
                       (emerg = +110.0°C)
mem:          +28.0°C  (crit = +105.0°C, hyst = -273.1°C)
                       (emerg = +110.0°C)
slowPPT:     1000.00 mW (cap =  90.00 W)
 



avec un xorg.conf je vais forcer le driver "amdgpu" , X tente de charger tous les drivers ati , radeon et autres ........
normalement un warning du serveur X


[   235.651] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x743f)
 


le fichier /etc/X11/xorg.conf


Section "Device"
     Identifier "Device0"
     Driver     "amdgpu"
EndSection
 

Dernière modification par robert2a (05-05-2022 09:54:24)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#11 05-05-2022 10:05:43

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

le log de X


[     6.152]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[     6.152] Current Operating System: Linux kabylake1 5.17.0-1-amd64 #1 SMP PREEMPT Debian 5.17.3-1 (2022-04-18) x86_64
[     6.152] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.17.0-1-amd64 root=UUID=0c5904b3-058e-45ff-b891-2dfb1a0288c2 ro quiet
[     6.152] xorg-server 2:21.1.3-2+b1 (https://www.debian.org/support)
[     6.152] Current version of pixman: 0.40.0
[     6.152]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     6.152] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.152] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May  5 09:55:19 2022
[     6.152] (==) Using config file: "/etc/X11/xorg.conf"
[     6.152] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.152] (==) No Layout section.  Using the first Screen section.
[     6.152] (==) No screen section available. Using defaults.
[     6.152] (**) |-->Screen "Default Screen Section" (0)
[     6.152] (**) |   |-->Monitor "<default monitor>"
[     6.153] (==) No device specified for screen "Default Screen Section".
  Using the first device section listed.
[     6.153] (**) |   |-->Device "Device0"
[     6.153] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     6.153] (==) Automatically adding devices
[     6.153] (==) Automatically enabling devices
[     6.153] (==) Automatically adding GPU devices
[     6.153] (==) Automatically binding GPU devices
[     6.153] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.153] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".
[     6.153]  Entry deleted from font path.
[     6.153]  (Run 'mkfontdir' on "/usr/share/fonts/X11/cyrillic").
[     6.153] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     6.153] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.153] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.153] (II) Loader magic: 0x564d53c0af20
[     6.153] (II) Module ABI versions:
[     6.153]  X.Org ANSI C Emulation: 0.4
[     6.153]  X.Org Video Driver: 25.2
[     6.153]  X.Org XInput driver : 24.4
[     6.153]  X.Org Server Extension : 10.0
[     6.153] (++) using VT number 7

[     6.153] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.154] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.154] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/drm/card0
[     6.201] (--) PCI:*(3@0:0:0) 1002:743f:1da2:e457 rev 193, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdfa00000/1048576, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[     6.202] (II) LoadModule: "glx"
[     6.202] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.203] (II) Module glx: vendor="X.Org Foundation"
[     6.203]  compiled for 1.21.1.3, module version = 1.0.0
[     6.203]  ABI class: X.Org Server Extension, version 10.0
[     6.203] (II) LoadModule: "amdgpu"
[     6.203] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[     6.207] (II) Module amdgpu: vendor="X.Org Foundation"
[     6.207]  compiled for 1.21.1.3, module version = 22.0.0
[     6.207]  Module class: X.Org Video Driver
[     6.207]  ABI class: X.Org Video Driver, version 25.2
[     6.207] (II) AMDGPU: Driver for AMD Radeon:
  All GPUs supported by the amdgpu kernel driver
[     6.220] (II) AMDGPU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     6.220] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[     6.220] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     6.220] (==) AMDGPU(0): Default visual is TrueColor
[     6.220] (==) AMDGPU(0): RGB weight 888
[     6.220] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[     6.221] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x743f)
[     6.221] (II) Loading sub module "fb"
[     6.221] (II) LoadModule: "fb"
[     6.221] (II) Module "fb" already built-in
[     6.221] (II) Loading sub module "dri2"
[     6.221] (II) LoadModule: "dri2"
[     6.221] (II) Module "dri2" already built-in
[     6.338] (II) Loading sub module "glamoregl"
[     6.338] (II) LoadModule: "glamoregl"
[     6.338] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.342] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.342]  compiled for 1.21.1.3, module version = 1.0.1
[     6.342]  ABI class: X.Org ANSI C Emulation, version 0.4
[     6.354] (II) AMDGPU(0): glamor X acceleration enabled on AMD BEIGE_GOBY (DRM 3.44.0, 5.17.0-1-amd64, LLVM 13.0.1)
[     6.354] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[     6.354] (==) AMDGPU(0): TearFree property default: auto
[     6.354] (==) AMDGPU(0): VariableRefresh: disabled
[     6.354] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[     6.354] (II) AMDGPU(0): KMS Pageflipping: enabled
[     6.355] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[     6.355] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[     6.365] (II) AMDGPU(0): EDID for output DisplayPort-0
[     6.365] (II) AMDGPU(0): EDID for output HDMI-A-0
[     6.365] (II) AMDGPU(0): Manufacturer: ACR  Model: 1e  Serial#: 2500875315
[     6.365] (II) AMDGPU(0): Year: 2009  Week: 51
[     6.365] (II) AMDGPU(0): EDID Version: 1.3
[     6.365] (II) AMDGPU(0): Digital Display Input
[     6.365] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 40  vert.: 25
[     6.365] (II) AMDGPU(0): Gamma: 2.07
[     6.365] (II) AMDGPU(0): DPMS capabilities: Off
[     6.365] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[     6.365] (II) AMDGPU(0): First detailed timing is preferred mode
[     6.365] (II) AMDGPU(0): redX: 0.634 redY: 0.354   greenX: 0.286 greenY: 0.620
[     6.365] (II) AMDGPU(0): blueX: 0.138 blueY: 0.076   whiteX: 0.312 whiteY: 0.328
[     6.365] (II) AMDGPU(0): Supported established timings:
[     6.365] (II) AMDGPU(0): 720x400@70Hz
[     6.365] (II) AMDGPU(0): 640x480@60Hz
[     6.365] (II) AMDGPU(0): 640x480@67Hz
[     6.365] (II) AMDGPU(0): 640x480@72Hz
[     6.365] (II) AMDGPU(0): 640x480@75Hz
[     6.365] (II) AMDGPU(0): 800x600@56Hz
[     6.365] (II) AMDGPU(0): 800x600@60Hz
[     6.365] (II) AMDGPU(0): 800x600@72Hz
[     6.365] (II) AMDGPU(0): 800x600@75Hz
[     6.365] (II) AMDGPU(0): 832x624@75Hz
[     6.365] (II) AMDGPU(0): 1024x768@60Hz
[     6.365] (II) AMDGPU(0): 1024x768@70Hz
[     6.365] (II) AMDGPU(0): 1024x768@75Hz
[     6.365] (II) AMDGPU(0): 1280x1024@75Hz
[     6.365] (II) AMDGPU(0): Manufacturer's mask: 0
[     6.365] (II) AMDGPU(0): Supported standard timings:
[     6.365] (II) AMDGPU(0): #0: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[     6.365] (II) AMDGPU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     6.365] (II) AMDGPU(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     6.365] (II) AMDGPU(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[     6.365] (II) AMDGPU(0): #4: hsize: 1280  vsize 800  refresh: 60  vid: 129
[     6.365] (II) AMDGPU(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     6.365] (II) AMDGPU(0): Supported detailed timing:
[     6.365] (II) AMDGPU(0): clock: 106.5 MHz   Image Size:  408 x 255 mm
[     6.365] (II) AMDGPU(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[     6.365] (II) AMDGPU(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[     6.365] (II) AMDGPU(0): Serial No: LBT080444214
[     6.365] (II) AMDGPU(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[     6.365] (II) AMDGPU(0): Monitor name: Acer B193W
[     6.365] (II) AMDGPU(0): EDID (in hex):
[     6.365] (II) AMDGPU(0):  00ffffffffffff0004721e0033541095
[     6.365] (II) AMDGPU(0):  331301038028196b2a6760a25a499e23
[     6.365] (II) AMDGPU(0):  135054bfef00818f81809500950f8100
[     6.365] (II) AMDGPU(0):  714f010101019a29a0d0518422305098
[     6.365] (II) AMDGPU(0):  360098ff1000001c000000ff004c4254
[     6.365] (II) AMDGPU(0):  3038303434343231340a000000fd0037
[     6.365] (II) AMDGPU(0):  4b1e530e000a202020202020000000fc
[     6.365] (II) AMDGPU(0):  00416365722042313933570a20200015
[     6.365] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0
[     6.365] (II) AMDGPU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[     6.365] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "1280x720"x59.9  106.50  1280 1520 1672 1904  720 903 909 934 -hsync +vsync (55.9 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     6.365] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     6.365] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[     6.365] (II) AMDGPU(0): Output HDMI-A-0 connected
[     6.365] (II) AMDGPU(0): Using exact sizes for initial modes
[     6.365] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1440x900 +0+0
[     6.365] (II) AMDGPU(0): mem size init: gart size :fe478000 vram size: s:fd317000 visible:fb18000
[     6.365] (==) AMDGPU(0): DPI set to (96, 96)
[     6.365] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.365] (II) Loading sub module "ramdac"
[     6.365] (II) LoadModule: "ramdac"
[     6.365] (II) Module "ramdac" already built-in
[     6.366] (II) AMDGPU(0): [DRI2] Setup complete
[     6.366] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     6.366] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[     6.393] (II) AMDGPU(0): Front buffer pitch: 6144 bytes
[     6.394] (II) AMDGPU(0): SYNC extension fences enabled
[     6.394] (II) AMDGPU(0): Present extension enabled
[     6.394] (==) AMDGPU(0): DRI3 enabled
[     6.394] (==) AMDGPU(0): Backing store enabled
[     6.394] (II) AMDGPU(0): Direct rendering enabled
[     6.406] (II) AMDGPU(0): Use GLAMOR acceleration.
[     6.406] (II) AMDGPU(0): Acceleration enabled
[     6.406] (==) AMDGPU(0): DPMS enabled
[     6.406] (==) AMDGPU(0): Silken mouse enabled
[     6.406] (II) AMDGPU(0): Set up textured video (glamor)
[     6.415] (II) Initializing extension Generic Event Extension
[     6.415] (II) Initializing extension SHAPE
[     6.415] (II) Initializing extension MIT-SHM
[     6.415] (II) Initializing extension XInputExtension
[     6.416] (II) Initializing extension XTEST
[     6.416] (II) Initializing extension BIG-REQUESTS
[     6.416] (II) Initializing extension SYNC
[     6.416] (II) Initializing extension XKEYBOARD
[     6.416] (II) Initializing extension XC-MISC
[     6.417] (II) Initializing extension SECURITY
[     6.417] (II) Initializing extension XFIXES
[     6.417] (II) Initializing extension RENDER
[     6.417] (II) Initializing extension RANDR
[     6.417] (II) Initializing extension COMPOSITE
[     6.417] (II) Initializing extension DAMAGE
[     6.418] (II) Initializing extension MIT-SCREEN-SAVER
[     6.418] (II) Initializing extension DOUBLE-BUFFER
[     6.418] (II) Initializing extension RECORD
[     6.418] (II) Initializing extension DPMS
[     6.418] (II) Initializing extension Present
[     6.418] (II) Initializing extension DRI3
[     6.418] (II) Initializing extension X-Resource
[     6.419] (II) Initializing extension XVideo
[     6.419] (II) Initializing extension XVideo-MotionCompensation
[     6.419] (II) Initializing extension SELinux
[     6.419] (II) SELinux: Disabled on system
[     6.419] (II) Initializing extension GLX
[     6.426] (II) AIGLX: Loaded and initialized radeonsi
[     6.426] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.426] (II) Initializing extension XFree86-VidModeExtension
[     6.427] (II) Initializing extension XFree86-DGA
[     6.427] (II) Initializing extension XFree86-DRI
[     6.427] (II) Initializing extension DRI2
[     6.428] (II) AMDGPU(0): Setting screen physical size to 381 x 238
 



le démarrage correct , je passe en résolu , mais clair que pas parfait .


xrandr
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 16384 x 16384
DisplayPort-0 disconnected primary (normal left inverted right x axis y axis)
HDMI-A-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm
   1440x900      59.89*+  74.98  
   1280x1024     75.02    60.02  
   1280x800      59.91  
   1152x864      75.00  
   1280x720      59.89  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    72.81    66.67    59.94  
   720x400       70.08  
 



penser a faire (pour mettre a jour la base de données du matériel )


update-pciids
 



pour bullseye , il faut installer le noyau des backports et mettre a jour le firmware-amd-graphics
pas testé et cela risque d'être encore moins bon .

Dernière modification par robert2a (05-05-2022 10:32:27)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#12 05-05-2022 17:24:48

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

re,

il est question de temps


il y a peu être un souci avec ces lignes (kernel)
May  5 15:05:44 kabylake1 kernel: [    5.073015] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:478
 



si je démarre en mode rescue =>  puis un ctrl+d (après un certain temps)  ça fonctionne a chaque fois
si je démarre normalement je tombe sur un curseur clignotant

a priori /dev/fb0  arrive trop tard (ou pas du tout ) et le seveur X plante .


dmesg | grep -i REG_WAIT
[    5.073015] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:478
[    5.291562] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:478
 




[    5.094895] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:03:00.0 on minor 0
[    5.096789] fbcon: amdgpudrmfb (fb0) is primary device
[    5.291562] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:478
[    5.375303] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
 

Dernière modification par robert2a (05-05-2022 17:28:23)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#13 05-05-2022 17:42:30

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

je met le retour des DRM propre , il me semble que le souci est "MPC2" et "MPCC" mais je sais pas a quoi cela correspond


dmesg | grep -i drm
[    2.678496] ACPI: bus type drm_connector registered
[    3.303350] [drm] amdgpu kernel modesetting enabled.
[    3.307574] [drm] initializing kernel modesetting (BEIGE_GOBY 0x1002:0x743F 0x1DA2:0xE457 0xC1).
[    3.307593] [drm] register mmio base: 0xDFA00000
[    3.307595] [drm] register mmio size: 1048576
[    3.308626] [drm] add ip block number 0 <nv_common>
[    3.308629] [drm] add ip block number 1 <gmc_v10_0>
[    3.308630] [drm] add ip block number 2 <navi10_ih>
[    3.308632] [drm] add ip block number 3 <psp>
[    3.308633] [drm] add ip block number 4 <smu>
[    3.308635] [drm] add ip block number 5 <dm>
[    3.308636] [drm] add ip block number 6 <gfx_v10_0>
[    3.308638] [drm] add ip block number 7 <sdma_v5_2>
[    3.308639] [drm] add ip block number 8 <vcn_v3_0>
[    3.308683] [drm] VCN(0) decode is enabled in VM mode
[    3.308721] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.308976] [drm] Detected VRAM RAM=4080M, BAR=4096M
[    3.308979] [drm] RAM width 64bits GDDR6
[    3.309036] [drm] amdgpu: 4080M of VRAM memory ready
[    3.309039] [drm] amdgpu: 4080M of GTT memory ready.
[    3.309044] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.309143] [drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
[    4.661563] [drm] Loading DMUB firmware via PSP: version=0x0202000C
[    4.665981] [drm] use_doorbell being set to: [true]
[    4.666889] [drm] Found VCN firmware Version ENC: 1.18 DEC: 2 VEP: 0 Revision: 14
[    4.733353] [drm] reserve 0xa00000 from 0x80fe000000 for PSP TMR
[    4.879733] [drm] Display Core initialized with v3.2.167!
[    4.880689] [drm] DMUB hardware initialized: version=0x0202000C
[    5.073015] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:478
[    5.090120] [drm] kiq ring mec 2 pipe 1 q 0
[    5.092312] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    5.094895] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:03:00.0 on minor 0
[    5.096789] fbcon: amdgpudrmfb (fb0) is primary device
[    5.291562] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:478
[    5.375303] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
 



on parle beaucoup de MPC2 pour carte son


03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller
 

Dernière modification par robert2a (05-05-2022 18:25:27)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#14 06-05-2022 09:02:48

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] gpu RX6500XT sous sid (bookworm) qui freeze

j'ai résolu en installant le paquet plymouth (minimal , je ne l'utilise pas ).
a priori cela retarde le serveur X et lightdm le temps que "/dev/fb0" soit créer .
un bout du syslog qui me semble intéressant :


#démarrage

May  6 06:18:52 kabylake1 systemd-modules-load[317]: Inserted module 'drivetemp'
May  6 06:18:52 kabylake1 systemd-modules-load[317]: Inserted module 'coretemp'
May  6 06:18:52 kabylake1 systemd-modules-load[317]: Inserted module 'nct6775'
May  6 06:18:52 kabylake1 systemd[1]: Starting Flush Journal to Persistent Storage...
May  6 06:18:52 kabylake1 systemd[1]: Finished Flush Journal to Persistent Storage.
May  6 06:18:52 kabylake1 systemd[1]: Started Rule-based Manager for Device Events and Files.
May  6 06:18:52 kabylake1 systemd[1]: Starting Show Plymouth Boot Screen...
May  6 06:18:52 kabylake1 systemd[1]: Started Show Plymouth Boot Screen.
May  6 06:18:52 kabylake1 systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of a failed condition check (ConditionPathExists=!/run/plymouth/pid).
May  6 06:18:52 kabylake1 kernel: [    0.000000] microcode: microcode updated early to revision 0xec, date = 2021-04-29
May  6 06:18:52 kabylake1 systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.

May  6 06:18:52 kabylake1 kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.17.0-1-amd64 root=UUID=0c5904b3-058e-45ff-b891-2dfb1a0288c2 ro quiet

May  6 06:18:52 kabylake1 kernel: [    0.197078] pci 0000:03:00.0: BAR 0: assigned to efifb
May  6 06:18:52 kabylake1 kernel: [    0.197084] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]


May  6 06:18:52 kabylake1 kernel: [    0.206592] iommu: Default domain type: Translated
May  6 06:18:52 kabylake1 kernel: [    0.206592] iommu: DMA domain TLB invalidation policy: lazy mode
May  6 06:18:52 kabylake1 kernel: [    0.206596] pci 0000:03:00.0: vgaarb: setting as boot VGA device
May  6 06:18:52 kabylake1 kernel: [    0.206596] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
May  6 06:18:52 kabylake1 kernel: [    0.206596] pci 0000:03:00.0: vgaarb: bridge control possible
May  6 06:18:52 kabylake1 kernel: [    0.206596] vgaarb: loaded


May  6 06:18:52 kabylake1 kernel: [    0.253553] pci 0000:00:1b.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
May  6 06:18:52 kabylake1 kernel: [    0.253556] pci 0000:00:1b.0: BAR 15: assigned [mem 0x2000000000-0x20001fffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    0.253557] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90200000-0x903fffff]
May  6 06:18:52 kabylake1 kernel: [    0.253559] pci 0000:00:1c.0: BAR 15: assigned [mem 0x2000200000-0x20003fffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    0.253560] pci 0000:00:1d.0: BAR 14: assigned [mem 0x90400000-0x905fffff]
May  6 06:18:52 kabylake1 kernel: [    0.253562] pci 0000:00:1d.0: BAR 15: assigned [mem 0x2000400000-0x20005fffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    0.253564] pci 0000:00:1b.0: BAR 13: assigned [io  0x2000-0x2fff]
May  6 06:18:52 kabylake1 kernel: [    0.253565] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
May  6 06:18:52 kabylake1 kernel: [    0.253567] pci 0000:00:1d.0: BAR 13: assigned [io  0x4000-0x4fff]


May  6 06:18:52 kabylake1 kernel: [    0.579432] Linux agpgart interface v0.103
May  6 06:18:52 kabylake1 kernel: [    0.579479] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
May  6 06:18:52 kabylake1 kernel: [    0.579984] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
May  6 06:18:52 kabylake1 kernel: [    0.579986] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
May  6 06:18:52 kabylake1 kernel: [    0.580713] serio: i8042 KBD port at 0x60,0x64 irq 1
May  6 06:18:52 kabylake1 kernel: [    0.580798] mousedev: PS/2 mouse device common for all mice

May  6 06:18:52 kabylake1 kernel: [    0.582446] efifb: probing for efifb
May  6 06:18:52 kabylake1 kernel: [    0.582455] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
May  6 06:18:52 kabylake1 kernel: [    0.582457] efifb: mode is 1024x768x32, linelength=4096, pages=1
May  6 06:18:52 kabylake1 kernel: [    0.582458] efifb: scrolling: redraw
May  6 06:18:52 kabylake1 kernel: [    0.582458] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
May  6 06:18:52 kabylake1 kernel: [    0.582514] Console: switching to colour frame buffer device 128x48
May  6 06:18:52 kabylake1 kernel: [    0.583580] fb0: EFI VGA frame buffer device



May  6 06:18:52 kabylake1 kernel: [    1.135599] [drm] amdgpu kernel modesetting enabled.
May  6 06:18:52 kabylake1 kernel: [    1.135648] amdgpu: CRAT table not found
May  6 06:18:52 kabylake1 kernel: [    1.135650] amdgpu: Virtual CRAT table created for CPU
May  6 06:18:52 kabylake1 kernel: [    1.135658] amdgpu: Topology: Add CPU node
May  6 06:18:52 kabylake1 kernel: [    1.135720] checking generic (c0000000 300000) vs hw (c0000000 10000000)
May  6 06:18:52 kabylake1 kernel: [    1.135729] checking generic (c0000000 300000) vs hw (c0000000 10000000)
May  6 06:18:52 kabylake1 kernel: [    1.135730] fb0: switching to amdgpu from EFI VGA
May  6 06:18:52 kabylake1 kernel: [    1.135878] Console: switching to colour dummy device 80x25
May  6 06:18:52 kabylake1 kernel: [    1.135913] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
May  6 06:18:52 kabylake1 kernel: [    1.136062] [drm] initializing kernel modesetting (BEIGE_GOBY 0x1002:0x743F 0x1DA2:0xE457 0xC1).
May  6 06:18:52 kabylake1 kernel: [    1.136066] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
May  6 06:18:52 kabylake1 kernel: [    1.136075] [drm] register mmio base: 0xDFA00000
May  6 06:18:52 kabylake1 kernel: [    1.136076] [drm] register mmio size: 1048576
May  6 06:18:52 kabylake1 kernel: [    1.137097] [drm] add ip block number 0 <nv_common>
May  6 06:18:52 kabylake1 kernel: [    1.137098] [drm] add ip block number 1 <gmc_v10_0>
May  6 06:18:52 kabylake1 kernel: [    1.137099] [drm] add ip block number 2 <navi10_ih>
May  6 06:18:52 kabylake1 kernel: [    1.137099] [drm] add ip block number 3 <psp>
May  6 06:18:52 kabylake1 kernel: [    1.137100] [drm] add ip block number 4 <smu>
May  6 06:18:52 kabylake1 kernel: [    1.137101] [drm] add ip block number 5 <dm>
May  6 06:18:52 kabylake1 kernel: [    1.137101] [drm] add ip block number 6 <gfx_v10_0>
May  6 06:18:52 kabylake1 kernel: [    1.137102] [drm] add ip block number 7 <sdma_v5_2>
May  6 06:18:52 kabylake1 kernel: [    1.137103] [drm] add ip block number 8 <vcn_v3_0>
May  6 06:18:52 kabylake1 kernel: [    1.137112] amdgpu 0000:03:00.0: No more image in the PCI ROM
May  6 06:18:52 kabylake1 kernel: [    1.137122] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from ROM BAR
May  6 06:18:52 kabylake1 kernel: [    1.137124] amdgpu: ATOM BIOS: 113-D6320100-S06
May  6 06:18:52 kabylake1 kernel: [    1.137130] [drm] VCN(0) decode is enabled in VM mode
May  6 06:18:52 kabylake1 kernel: [    1.137154] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
May  6 06:18:52 kabylake1 kernel: [    1.137164] amdgpu 0000:03:00.0: BAR 2: releasing [mem 0xd0000000-0xd01fffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137166] amdgpu 0000:03:00.0: BAR 0: releasing [mem 0xc0000000-0xcfffffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137178] pcieport 0000:02:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137179] pcieport 0000:01:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137180] pcieport 0000:00:01.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137185] pcieport 0000:00:01.0: BAR 15: assigned [mem 0x2080000000-0x21ffffffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137187] pcieport 0000:01:00.0: BAR 15: assigned [mem 0x2080000000-0x21ffffffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137188] pcieport 0000:02:00.0: BAR 15: assigned [mem 0x2080000000-0x21ffffffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137190] amdgpu 0000:03:00.0: BAR 0: assigned [mem 0x2100000000-0x21ffffffff 64bit pref]
May  6 06:18:52 kabylake1 kernel: [    1.137201] amdgpu 0000:03:00.0: BAR 2: assigned [mem 0x2080000000-0x20801fffff 64bit pref]



May  6 06:18:52 kabylake1 kernel: [    1.137281] amdgpu 0000:03:00.0: amdgpu: VRAM: 4080M 0x0000008000000000 - 0x00000080FEFFFFFF (4080M used)
May  6 06:18:52 kabylake1 kernel: [    1.137283] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
May  6 06:18:52 kabylake1 kernel: [    1.137284] amdgpu 0000:03:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
May  6 06:18:52 kabylake1 kernel: [    1.137291] [drm] Detected VRAM RAM=4080M, BAR=4096M
May  6 06:18:52 kabylake1 kernel: [    1.137292] [drm] RAM width 64bits GDDR6
May  6 06:18:52 kabylake1 kernel: [    1.137328] [drm] amdgpu: 4080M of VRAM memory ready
May  6 06:18:52 kabylake1 kernel: [    1.137328] [drm] amdgpu: 4080M of GTT memory ready.
May  6 06:18:52 kabylake1 kernel: [    1.137331] [drm] GART: num cpu pages 131072, num gpu pages 131072
May  6 06:18:52 kabylake1 kernel: [    1.137406] [drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
May  6 06:18:52 kabylake1 kernel: [    1.137519] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_sos.bin
May  6 06:18:52 kabylake1 kernel: [    1.137553] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_ta.bin
May  6 06:18:52 kabylake1 kernel: [    1.137559] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist


May  6 06:18:52 kabylake1 kernel: [    2.463903] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_smc.bin
May  6 06:18:52 kabylake1 kernel: [    2.463910] amdgpu 0000:03:00.0: amdgpu: STB initialized to 2048 entries
May  6 06:18:52 kabylake1 kernel: [    2.463959] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_dmcub.bin
May  6 06:18:52 kabylake1 kernel: [    2.463961] [drm] Loading DMUB firmware via PSP: version=0x0202000C
May  6 06:18:52 kabylake1 kernel: [    2.464001] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_pfp.bin
May  6 06:18:52 kabylake1 kernel: [    2.464038] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_me.bin
May  6 06:18:52 kabylake1 kernel: [    2.464074] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_ce.bin
May  6 06:18:52 kabylake1 kernel: [    2.464096] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_rlc.bin
May  6 06:18:52 kabylake1 kernel: [    2.464132] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_mec.bin
May  6 06:18:52 kabylake1 kernel: [    2.464172] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_mec2.bin
May  6 06:18:52 kabylake1 kernel: [    2.465042] ata4.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
May  6 06:18:52 kabylake1 kernel: [    2.465046] ata4.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
May  6 06:18:52 kabylake1 kernel: [    2.465383] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_sdma.bin
May  6 06:18:52 kabylake1 kernel: [    2.465386] [drm] use_doorbell being set to: [true]
May  6 06:18:52 kabylake1 kernel: [    2.465481] amdgpu 0000:03:00.0: firmware: direct-loading firmware amdgpu/beige_goby_vcn.bin
May  6 06:18:52 kabylake1 kernel: [    2.465483] [drm] Found VCN firmware Version ENC: 1.18 DEC: 2 VEP: 0 Revision: 14
May  6 06:18:52 kabylake1 kernel: [    2.465487] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
May  6 06:18:52 kabylake1 kernel: [    2.466014] ata4.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133
May  6 06:18:52 kabylake1 kernel: [    2.468024] ata4.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
May  6 06:18:52 kabylake1 kernel: [    2.468026] ata4.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
May  6 06:18:52 kabylake1 kernel: [    2.468639] ata7.00: ATA-8: Kingston SHPM2280P2/240G, OC34L5TP, max UDMA/133
May  6 06:18:52 kabylake1 kernel: [    2.468642] ata7.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 32)
May  6 06:18:52 kabylake1 kernel: [    2.469058] ata4.00: configured for UDMA/133
May  6 06:18:52 kabylake1 kernel: [    2.471092] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24D5MT       2.00 PQ: 0 ANSI: 5
May  6 06:18:52 kabylake1 kernel: [    2.474271] ata7.00: configured for UDMA/133
May  6 06:18:52 kabylake1 kernel: [    2.495360] scsi 6:0:0:0: Direct-Access     ATA      Kingston SHPM228 L5TP PQ: 0 ANSI: 5


May  6 06:18:52 kabylake1 kernel: [    2.621862] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
May  6 06:18:52 kabylake1 kernel: [    2.636903] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
May  6 06:18:52 kabylake1 kernel: [    2.636932] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x0000000d, smu fw if version = 0x0000000f, smu fw version = 0x00491a00 (73.26.0)
May  6 06:18:52 kabylake1 kernel: [    2.636941] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
May  6 06:18:52 kabylake1 kernel: [    2.636954] amdgpu 0000:03:00.0: amdgpu: use vbios provided pptable
May  6 06:18:52 kabylake1 kernel: [    2.677874] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
May  6 06:18:52 kabylake1 kernel: [    2.678122] [drm] Display Core initialized with v3.2.167!
May  6 06:18:52 kabylake1 kernel: [    2.679087] [drm] DMUB hardware initialized: version=0x0202000C
May  6 06:18:52 kabylake1 kernel: [    2.879119] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:478
May  6 06:18:52 kabylake1 kernel: [    2.896028] [drm] kiq ring mec 2 pipe 1 q 0
May  6 06:18:52 kabylake1 kernel: [    2.898798] [drm] VCN decode and encode initialized successfully(under DPG Mode).
May  6 06:18:52 kabylake1 kernel: [    2.899893] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
May  6 06:18:52 kabylake1 kernel: [    2.900054] amdgpu: SRAT table not found
May  6 06:18:52 kabylake1 kernel: [    2.900055] amdgpu: Virtual CRAT table created for GPU
May  6 06:18:52 kabylake1 kernel: [    2.900113] amdgpu: Topology: Add dGPU node [0x743f:0x1002]
May  6 06:18:52 kabylake1 kernel: [    2.900115] kfd kfd: amdgpu: added device 1002:743f
May  6 06:18:52 kabylake1 kernel: [    2.900129] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 8, active_cu_number 16
May  6 06:18:52 kabylake1 kernel: [    2.900178] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900179] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900180] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900181] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900182] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900183] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900184] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900184] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900185] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900186] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900187] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
May  6 06:18:52 kabylake1 kernel: [    2.900188] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1
May  6 06:18:52 kabylake1 kernel: [    2.900776] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:03:00.0 on minor 0
May  6 06:18:52 kabylake1 kernel: [    2.903376] fbcon: amdgpudrmfb (fb0) is primary device
May  6 06:18:52 kabylake1 kernel: [    3.098039] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:478
May  6 06:18:52 kabylake1 kernel: [    3.159043] Console: switching to colour frame buffer device 180x56
May  6 06:18:52 kabylake1 kernel: [    3.180959] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
May  6 06:18:52 kabylake1 kernel: [    3.289204] PM: Image not found (code -22)



May  6 06:18:52 kabylake1 systemd[1]: Finished Permit User Sessions.
May  6 06:18:52 kabylake1 systemd[1]: Reached target Sound Card.
May  6 06:18:52 kabylake1 systemd[1]: Starting Light Display Manager...
May  6 06:18:52 kabylake1 systemd[1]: Starting Hold until boot process finishes up...


May  6 06:18:52 kabylake1 systemd[1]: Started Authorization Manager.
May  6 06:18:52 kabylake1 accounts-daemon[573]: started daemon version 22.07.5
May  6 06:18:52 kabylake1 systemd[1]: Started Accounts Service.
May  6 06:18:52 kabylake1 systemd[1]: Received SIGRTMIN+21 from PID 241 (plymouthd).
May  6 06:18:52 kabylake1 systemd[1]: Finished Hold until boot process finishes up.
May  6 06:18:52 kabylake1 systemd[1]: Started Getty on tty1.
May  6 06:18:52 kabylake1 systemd[1]: Reached target Login Prompts.
May  6 06:18:52 kabylake1 udisksd[586]: Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sda': Unexpected sense data returned:#012000>
May  6 06:18:52 kabylake1 systemd[1]: Started Light Display Manager.

May  6 06:18:52 kabylake1 systemd[1]: Reached target Graphical Interface.

May  6 06:18:52 kabylake1 systemd[1]: Startup finished in 17.801s (firmware) + 6.070s (loader) + 3.469s (kernel) + 1.551s (userspace) = 28.894s.
 



on verra dans le temps  smile
ps: pour les firmware => 17.801s (firmware) quand même roll


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

Pied de page des forums