Vous n'êtes pas identifié(e).
Pages : 1
en 2) les températures des disques durs :
sda : hdd principal mixte w10/debian en double boot
sdb : disque de sauvegarde windows
sdc : disque de sauvegarde clonezilla
sdd à sdf : disques de sauvegardes générales (musique , video ... etc )
la température de mes hdd monte facilement à 40 °c
pour terminer , je vous montre le pompon ; que j'aimerai bien qu'on m'explique :
le smartctl de sda :
vous aurez surement noté les lignes suivantes :
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 088 006 Pre-fail Always - 39760424
3 Spin_Up_Time 0x0003 093 090 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 675
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 35264876930
9 Power_On_Hours 0x0032 050 050 000 Old_age Always - 44247
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
Error 834 occurred at disk power-on lifetime: 37677 hours (1569 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 44246 -
# 2 Short offline Completed without error 00% 43303 -
# 3 Short offline Completed: read failure 10% 34897 10127352
# 4 Short offline Completed: read failure 10% 34823 10127352
# 5 Short offline Completed: read failure 30% 34538 10127352
# 6 Short offline Completed without error 00% 33775 -
que veulent bien vouloir dire tous ces messages d'erreur ? (sur sda)
merci
Dernière modification par Debian Alain (21-05-2017 10:16:26)
Hors ligne
S.M.A.R.T. <=> Self-Monitoring, Analysis and Reporting Technology
Dernière modification par MicP (21-05-2017 09:10:52)
Hors ligne
Hors ligne
Il vaut mieux montrer que raconter.
Hors ligne
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 44246 -
# 2 Short offline Completed without error 00% 43303 -
# 3 Short offline Completed: read failure 10% 34897 10127352
# 4 Short offline Completed: read failure 10% 34823 10127352
# 5 Short offline Completed: read failure 30% 34538 10127352
# 6 Short offline Completed without error 00% 33775 -
dans ce rapport , on voit que les 2 derniers messages d'erreur (#1 et #2) sont vierges .
je suppose que c'est de là que vient ton assertion .
pour le temps de mise en service , je suppose que ton commentaire vient de là :
9 Power_On_Hours 0x0032 050 050 000 Old_age Always - 44248
peux tu confirmer , raleur ?
en même temps : que penser de ce rapport là visible aussi sous gsmartcontrol :
rapport sur les 5 dernières erreurs d'après GSmartControl
erreurs de 834 à 830 incluses .
SMART Error Log Version: 1
ATA Error Count: 834 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 834 occurred at disk power-on lifetime: 37677 hours (1569 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f8 87 9a 00 Error: UNC at LBA = 0x009a87f8 = 10127352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 30 8a 9a 40 00 7d+11:40:04.319 READ FPDMA QUEUED
60 00 00 30 89 9a 40 00 7d+11:40:04.319 READ FPDMA QUEUED
60 00 00 30 88 9a 40 00 7d+11:40:04.318 READ FPDMA QUEUED
60 00 00 30 87 9a 40 00 7d+11:40:04.318 READ FPDMA QUEUED
60 00 00 30 86 9a 40 00 7d+11:40:04.318 READ FPDMA QUEUED
Error 833 occurred at disk power-on lifetime: 37677 hours (1569 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f8 87 9a 00 Error: UNC at LBA = 0x009a87f8 = 10127352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 e0 87 9a 40 00 7d+11:40:00.728 READ FPDMA QUEUED
61 00 20 40 d0 a4 40 00 7d+11:40:00.727 WRITE FPDMA QUEUED
60 00 20 c0 87 9a 40 00 7d+11:40:00.727 READ FPDMA QUEUED
61 00 20 20 d0 a4 40 00 7d+11:40:00.727 WRITE FPDMA QUEUED
60 00 20 a0 87 9a 40 00 7d+11:40:00.727 READ FPDMA QUEUED
Error 832 occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f8 87 9a 00 Error: UNC at LBA = 0x009a87f8 = 10127352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 30 8a 9a 40 00 6d+14:09:31.194 READ FPDMA QUEUED
60 00 00 30 89 9a 40 00 6d+14:09:31.194 READ FPDMA QUEUED
60 00 00 30 88 9a 40 00 6d+14:09:31.194 READ FPDMA QUEUED
60 00 00 30 87 9a 40 00 6d+14:09:31.194 READ FPDMA QUEUED
60 00 00 30 86 9a 40 00 6d+14:09:31.194 READ FPDMA QUEUED
Error 831 occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 87 9a 00 Error: WP at LBA = 0x009a87ff = 10127359
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 c0 56 5d 40 00 6d+14:09:27.608 WRITE FPDMA QUEUED
60 00 01 ff 87 9a 40 00 6d+14:09:27.607 READ FPDMA QUEUED
61 00 90 60 51 5f 40 00 6d+14:09:27.606 WRITE FPDMA QUEUED
61 00 08 58 63 3b 40 00 6d+14:09:27.606 WRITE FPDMA QUEUED
61 00 28 ff ff ff 4f 00 6d+14:09:27.606 WRITE FPDMA QUEUED
Error 830 occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 fe 87 9a 00 Error: UNC at LBA = 0x009a87fe = 10127358
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 b8 31 7b 43 00 6d+14:09:24.026 READ FPDMA QUEUED
61 00 10 40 56 5d 40 00 6d+14:09:24.026 WRITE FPDMA QUEUED
60 00 01 fe 87 9a 40 00 6d+14:09:24.026 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 6d+14:09:24.025 WRITE FPDMA QUEUED
2f 00 01 10 00 00 20 00 6d+14:09:23.872 READ LOG EXT
Dernière modification par Debian Alain (21-05-2017 10:03:23)
Hors ligne
à quoi ça ce verrait , d'ailleurs ?
Aux attributs Reallocated_Sector_Ct, Current_Pending_Sector ou Offline_Uncorrectable qui auraient une valeur brute (RAW) différente de 0.
c'est ça qui te fait dire que l'erreur a disparue ?
Ça, et les valeurs brutes nulles des attributs cités ci-dessus.
pour le temps de mise en service , je suppose que ton commentaire vient de là
Oui.
Dernière modification par raleur (21-05-2017 10:05:02)
Il vaut mieux montrer que raconter.
Hors ligne
Dernière modification par Debian Alain (21-05-2017 10:07:59)
Hors ligne
Dernière modification par raleur (21-05-2017 10:18:23)
Il vaut mieux montrer que raconter.
Hors ligne
Model Family: Seagate Barracuda Green (AF)
s'élève à combien ?
comment faut il l'interpréter ce fichu MTBF ?
voilà .
merci en particulier à raleur
.
https://fr.wikipedia.org/wiki/Temps_moyen_entre_pannes
https://fr.wikipedia.org/wiki/MTTF
Dernière modification par Debian Alain (21-05-2017 12:06:43)
Hors ligne
…c'est gentil MiCP , mais l'anglais et moi , …
Clique sur le mot S.M.A.R.T. (de mon précédent message comme dans celui-ci)
Ce mot apparaît en bleu sur ce forum (comme sur la plupart des pages web quand il s'agit d'un lien web)
je m'étais arrangé pour que ce lien te permette d'ouvrir la page WiKipédia (qui est rédigée en Français) concernant S.M.A.R.T.
=======
D'autres termes :
MTBF <=> Mean Time Between Failure <=> Temps moyen entre chaque panne
AFR <=> Annualized Failure Rate <=> Taux annuel de pannes
ARR <=> Annualized Replacement Rate <=> Taux annuel de remplacement
(Je n'ai pas trouvé de pages web en Français concernant ces deux derniers acronymes)
Dernière modification par MicP (23-05-2017 07:57:54)
Hors ligne
Pages : 1