logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 12-08-2018 09:44:15

tlax38
Membre
Distrib. : Debian Stretch 64bits GNOME
Inscription : 24-02-2018

Installation pilote CGU NVidia

Bonjour à tous,
Je reviens sur Debian après un passage sous w$ (avec le même laptop qu'auparavant).
Evidemment je me retape la configuration de mes pilotes notamment ma CG nvidia avec les même problèmes que dans mes sujets précédents; j'arrive à les résoudre sauf ce message d'erreur:

tlax38@tlax38-pc:~$ optirun glxgears
 



[ 5082.557605] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Unknown chipset: NV117

[ 5082.557648] [ERROR]Aborting because fallback start is disabled.
 



COmme j'ai relu ce sujet en particulier: https://debian-facile.org/viewtopic.php … 46#p265746 , j'ai bien installé le firmware.

et à part ça...

journalctl -r -p err



-- Logs begin at Sun 2018-08-12 08:30:33 CEST, end at Sun 2018-08-12 10:38:32 CEST. --
août 12 10:23:19 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:23:18 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:23:08 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:20:57 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:20:57 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:18:36 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:18:36 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:16:29 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:16:28 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:16:19 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:14:08 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:14:07 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:11:37 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:11:37 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 10:11:15 tlax38-pc systemd[901]: Failed to start Tracker metadata extractor.
août 12 09:55:11 tlax38-pc kernel: nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
août 12 09:55:11 tlax38-pc kernel: nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
août 12 09:55:11 tlax38-pc kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)
août 12 08:41:26 tlax38-pc bluetoothd[592]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)
août 12 08:30:48 tlax38-pc minissdpd[743]: setsockopt(udp, IP_ADD_MEMBERSHIP)(0.0.0.0): No such device
août 12 08:30:41 tlax38-pc bluetoothd[592]: sap-server: Operation not permitted (1)
août 12 08:30:41 tlax38-pc bluetoothd[592]: Sap driver initialization failed.
août 12 08:30:41 tlax38-pc bluetoothd[592]: Failed to obtain handles for "Service Changed" characteristic
août 12 08:30:40 tlax38-pc avahi-daemon[611]: chroot.c: open() failed: No such file or directory
août 12 08:30:36 tlax38-pc kernel: Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.7.bseq
août 12 08:30:36 tlax38-pc kernel: bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.bseq (-2)
août 12 08:30:36 tlax38-pc kernel: Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq(-2)
août 12 08:30:36 tlax38-pc kernel: bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq (-2)
août 12 08:30:35 tlax38-pc kernel: iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-3160-17.ucode (-2)
 



Le log X

root@tlax38-pc:/home/tlax38# cat /home/tlax38/.local/share/xorg/Xorg.0.log
 



[   654.890] (--) Log file renamed from "/home/tlax38/.local/share/xorg/Xorg.pid-914.log" to "/home/tlax38/.local/share/xorg/Xorg.0.log"
[   654.890]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[   654.890] X Protocol Version 11, Revision 0
[   654.890] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[   654.890] Current Operating System: Linux tlax38-pc 4.9.0-7-amd64 #1 SMP Debian 4.9.110-3+deb9u1 (2018-08-03) x86_64
[   654.890] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-7-amd64 root=UUID=a0865148-79f7-43fc-94e7-31d831649252 ro quiet
[   654.890] Build Date: 16 October 2017  08:19:45AM
[   654.890] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support)
[   654.890] Current version of pixman: 0.34.0
[   654.890]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[   654.890] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   654.890] (==) Log file: "/home/tlax38/.local/share/xorg/Xorg.0.log", Time: Sun Aug 12 08:41:23 2018
[   654.903] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   654.928] (==) No Layout section.  Using the first Screen section.
[   654.928] (==) No screen section available. Using defaults.
[   654.928] (**) |-->Screen "Default Screen Section" (0)
[   654.928] (**) |   |-->Monitor "<default monitor>"
[   654.928] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[   654.928] (==) Automatically adding devices
[   654.928] (==) Automatically enabling devices
[   654.928] (==) Automatically adding GPU devices
[   654.928] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   654.928] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   654.928]  Entry deleted from font path.
[   654.928] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[   654.928] (==) ModulePath set to "/usr/lib/xorg/modules"
[   654.928] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[   654.929] (II) Loader magic: 0x56282af77e00
[   654.929] (II) Module ABI versions:
[   654.929]  X.Org ANSI C Emulation: 0.4
[   654.929]  X.Org Video Driver: 23.0
[   654.929]  X.Org XInput driver : 24.1
[   654.929]  X.Org Server Extension : 10.0
[   654.929] (++) using VT number 2

[   654.930] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[   654.931] (II) xfree86: Adding drm device (/dev/dri/card0)
[   654.931] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[   654.932] (--) PCI:*(0:0:2:0) 8086:1612:1462:1139 rev 10, Mem @ 0xa1000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   654.932] (II) LoadModule: "glx"
[   654.938] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   654.957] (II) Module glx: vendor="X.Org Foundation"
[   654.957]  compiled for 1.19.2, module version = 1.0.0
[   654.957]  ABI class: X.Org Server Extension, version 10.0
[   654.957] (==) Matched modesetting as autoconfigured driver 0
[   654.957] (==) Matched fbdev as autoconfigured driver 1
[   654.957] (==) Matched vesa as autoconfigured driver 2
[   654.957] (==) Assigned the driver to the xf86ConfigLayout
[   654.957] (II) LoadModule: "modesetting"
[   654.957] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   654.958] (II) Module modesetting: vendor="X.Org Foundation"
[   654.958]  compiled for 1.19.2, module version = 1.19.2
[   654.958]  Module class: X.Org Video Driver
[   654.958]  ABI class: X.Org Video Driver, version 23.0
[   654.958] (II) LoadModule: "fbdev"
[   654.958] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   654.959] (II) Module fbdev: vendor="X.Org Foundation"
[   654.959]  compiled for 1.19.0, module version = 0.4.4
[   654.959]  Module class: X.Org Video Driver
[   654.959]  ABI class: X.Org Video Driver, version 23.0
[   654.959] (II) LoadModule: "vesa"
[   654.959] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   654.965] (II) Module vesa: vendor="X.Org Foundation"
[   654.965]  compiled for 1.19.0, module version = 2.3.4
[   654.965]  Module class: X.Org Video Driver
[   654.965]  ABI class: X.Org Video Driver, version 23.0
[   654.965] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   654.965] (II) FBDEV: driver for framebuffer: fbdev
[   654.965] (II) VESA: driver for VESA chipsets: vesa
[   654.965] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   654.965] (II) modeset(0): using drv /dev/dri/card0
[   654.965] (WW) Falling back to old probe method for fbdev
[   654.965] (II) Loading sub module "fbdevhw"
[   654.965] (II) LoadModule: "fbdevhw"
[   654.965] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   654.966] (II) Module fbdevhw: vendor="X.Org Foundation"
[   654.966]  compiled for 1.19.2, module version = 0.0.2
[   654.966]  ABI class: X.Org Video Driver, version 23.0
[   654.966] (WW) Falling back to old probe method for vesa
[   654.966] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   654.966] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[   654.966] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   654.966] (==) modeset(0): RGB weight 888
[   654.966] (==) modeset(0): Default visual is TrueColor
[   654.966] (II) Loading sub module "glamoregl"
[   654.966] (II) LoadModule: "glamoregl"
[   654.966] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   654.982] (II) Module glamoregl: vendor="X.Org Foundation"
[   654.982]  compiled for 1.19.2, module version = 1.0.0
[   654.982]  ABI class: X.Org ANSI C Emulation, version 0.4
[   654.982] (II) glamor: OpenGL accelerated X.org driver based.
[   654.988] (II) glamor: EGL version 1.4 (DRI2):
[   654.989] (II) modeset(0): glamor initialized
[   654.990] (II) modeset(0): Output eDP-1 has no monitor section
[   654.990] (II) modeset(0): Output DP-1 has no monitor section
[   654.991] (II) modeset(0): Output HDMI-1 has no monitor section
[   654.995] (II) modeset(0): Output HDMI-2 has no monitor section
[   654.996] (II) modeset(0): EDID for output eDP-1
[   654.996] (II) modeset(0): Manufacturer: CMN  Model: 1735  Serial#: 0
[   654.996] (II) modeset(0): Year: 2014  Week: 39
[   654.996] (II) modeset(0): EDID Version: 1.4
[   654.996] (II) modeset(0): Digital Display Input
[   654.996] (II) modeset(0): 6 bits per channel
[   654.996] (II) modeset(0): Digital interface is DisplayPort
[   654.996] (II) modeset(0): Max Image Size [cm]: horiz.: 38  vert.: 22
[   654.996] (II) modeset(0): Gamma: 2.20
[   654.996] (II) modeset(0): No DPMS capabilities specified
[   654.996] (II) modeset(0): Supported color encodings: RGB 4:4:4
[   654.996] (II) modeset(0): First detailed timing is preferred mode
[   654.996] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   654.996] (II) modeset(0): redX: 0.640 redY: 0.333   greenX: 0.313 greenY: 0.613
[   654.996] (II) modeset(0): blueX: 0.154 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[   654.996] (II) modeset(0): Manufacturer's mask: 0
[   654.996] (II) modeset(0): Supported detailed timing:
[   654.996] (II) modeset(0): clock: 140.0 MHz   Image Size:  382 x 215 mm
[   654.996] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2102 h_border: 0
[   654.996] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1110 v_border: 0
[   654.996] (II) modeset(0):  N173HGE-E11
[   654.996] (II) modeset(0):  CMN
[   654.996] (II) modeset(0):  N173HGE-E11
[   654.996] (II) modeset(0): EDID (in hex):
[   654.996] (II) modeset(0):   00ffffffffffff000dae351700000000
[   654.996] (II) modeset(0):   271801049526167802d495a355509d27
[   654.996] (II) modeset(0):   0f505400000001010101010101010101
[   654.996] (II) modeset(0):   010101010101b03680b670381e403020
[   654.996] (II) modeset(0):   35007ed710000018000000fe004e3137
[   654.996] (II) modeset(0):   334847452d4531310a20000000fe0043
[   654.996] (II) modeset(0):   4d4e0a202020202020202020000000fe
[   654.996] (II) modeset(0):   004e3137334847452d4531310a20009c
[   654.996] (II) modeset(0): Printing probed modes for output eDP-1
[   654.996] (II) modeset(0): Modeline "1920x1080"x60.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)
[   654.996] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[   654.996] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[   654.996] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[   654.996] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[   654.996] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   654.996] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   654.996] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[   654.996] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   654.996] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[   654.996] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[   654.996] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[   654.996] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   654.996] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   654.996] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   654.996] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   654.996] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   654.996] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   654.996] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   654.996] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   654.996] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   654.996] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   654.996] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   654.996] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   654.996] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[   654.996] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   654.996] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   654.996] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[   654.996] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   654.996] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   654.996] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[   654.996] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[   654.996] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[   654.996] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   654.996] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   654.996] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   654.996] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   654.996] (II) modeset(0): EDID for output DP-1
[   654.998] (II) modeset(0): EDID for output HDMI-1
[   655.001] (II) modeset(0): EDID for output HDMI-2
[   655.001] (II) modeset(0): Output eDP-1 connected
[   655.001] (II) modeset(0): Output DP-1 disconnected
[   655.001] (II) modeset(0): Output HDMI-1 disconnected
[   655.001] (II) modeset(0): Output HDMI-2 disconnected
[   655.001] (II) modeset(0): Using exact sizes for initial modes
[   655.001] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[   655.001] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   655.001] (==) modeset(0): DPI set to (96, 96)
[   655.001] (II) Loading sub module "fb"
[   655.001] (II) LoadModule: "fb"
[   655.002] (II) Loading /usr/lib/xorg/modules/libfb.so
[   655.002] (II) Module fb: vendor="X.Org Foundation"
[   655.002]  compiled for 1.19.2, module version = 1.0.0
[   655.002]  ABI class: X.Org ANSI C Emulation, version 0.4
[   655.002] (II) UnloadModule: "fbdev"
[   655.002] (II) Unloading fbdev
[   655.002] (II) UnloadSubModule: "fbdevhw"
[   655.002] (II) Unloading fbdevhw
[   655.002] (II) UnloadModule: "vesa"
[   655.002] (II) Unloading vesa
[   655.002] (==) Depth 24 pixmap format is 32 bpp
[   655.060] (==) modeset(0): Backing store enabled
[   655.060] (==) modeset(0): Silken mouse enabled
[   655.061] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   655.062] (==) modeset(0): DPMS enabled
[   655.062] (II) modeset(0): [DRI2] Setup complete
[   655.062] (II) modeset(0): [DRI2]   DRI driver: i965
[   655.062] (II) modeset(0): [DRI2]   VDPAU driver: i965
[   655.062] (--) RandR disabled
[   655.064] (II) SELinux: Disabled on system
[   655.067] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   655.067] (II) AIGLX: enabled GLX_ARB_create_context
[   655.067] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   655.067] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   655.067] (II) AIGLX: enabled GLX_INTEL_swap_event
[   655.067] (II) AIGLX: enabled GLX_SGI_swap_control
[   655.067] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   655.067] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   655.067] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   655.067] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   655.067] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   655.068] (II) AIGLX: Loaded and initialized i965
[   655.068] (II) GLX: Initialized DRI2 GL provider for screen 0
[   655.069] (II) modeset(0): Damage tracking initialized
[   655.069] (II) modeset(0): Setting screen physical size to 508 x 285
[   655.106] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[   655.106] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   655.106] (II) LoadModule: "libinput"
[   655.106] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   655.124] (II) Module libinput: vendor="X.Org Foundation"
[   655.124]  compiled for 1.19.0, module version = 0.23.0
[   655.124]  Module class: X.Org XInput Driver
[   655.124]  ABI class: X.Org XInput driver, version 24.1
[   655.124] (II) Using input driver 'libinput' for 'Power Button'
[   655.125] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 21 paused 0
[   655.125] (**) Power Button: always reports core events
[   655.125] (**) Option "Device" "/dev/input/event6"
[   655.125] (**) Option "_source" "server/udev"
[   655.125] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[   655.125] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[   655.125] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[   655.125] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   655.125] (**) Option "xkb_model" "pc105"
[   655.125] (**) Option "xkb_layout" "fr"
[   655.125] (**) Option "xkb_variant" "latin9"
[   655.136] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[   655.136] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[   655.136] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[   655.136] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   655.136] (II) Using input driver 'libinput' for 'Video Bus'
[   655.137] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 24 paused 0
[   655.137] (**) Video Bus: always reports core events
[   655.137] (**) Option "Device" "/dev/input/event12"
[   655.137] (**) Option "_source" "server/udev"
[   655.137] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard
[   655.137] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[   655.137] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13/event12"
[   655.137] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   655.137] (**) Option "xkb_model" "pc105"
[   655.137] (**) Option "xkb_layout" "fr"
[   655.137] (**) Option "xkb_variant" "latin9"
[   655.137] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard
[   655.137] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[   655.138] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[   655.138] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   655.138] (II) Using input driver 'libinput' for 'Video Bus'
[   655.138] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 25 paused 0
[   655.138] (**) Video Bus: always reports core events
[   655.138] (**) Option "Device" "/dev/input/event13"
[   655.138] (**) Option "_source" "server/udev"
[   655.138] (II) input device 'Video Bus', /dev/input/event13 is tagged by udev as: Keyboard
[   655.138] (II) input device 'Video Bus', /dev/input/event13 is a keyboard
[   655.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input14/event13"
[   655.138] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   655.138] (**) Option "xkb_model" "pc105"
[   655.138] (**) Option "xkb_layout" "fr"
[   655.138] (**) Option "xkb_variant" "latin9"
[   655.139] (II) input device 'Video Bus', /dev/input/event13 is tagged by udev as: Keyboard
[   655.139] (II) input device 'Video Bus', /dev/input/event13 is a keyboard
[   655.139] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   655.139] (II) No input driver specified, ignoring this device.
[   655.139] (II) This device may have been added with another device file.
[   655.139] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   655.139] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   655.139] (II) Using input driver 'libinput' for 'Power Button'
[   655.139] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[   655.139] (**) Power Button: always reports core events
[   655.139] (**) Option "Device" "/dev/input/event5"
[   655.139] (**) Option "_source" "server/udev"
[   655.140] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[   655.140] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[   655.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"
[   655.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   655.140] (**) Option "xkb_model" "pc105"
[   655.140] (**) Option "xkb_layout" "fr"
[   655.140] (**) Option "xkb_variant" "latin9"
[   655.140] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[   655.140] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[   655.140] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   655.140] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   655.140] (II) Using input driver 'libinput' for 'Sleep Button'
[   655.140] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[   655.140] (**) Sleep Button: always reports core events
[   655.140] (**) Option "Device" "/dev/input/event4"
[   655.140] (**) Option "_source" "server/udev"
[   655.141] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[   655.141] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[   655.141] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[   655.141] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[   655.141] (**) Option "xkb_model" "pc105"
[   655.141] (**) Option "xkb_layout" "fr"
[   655.141] (**) Option "xkb_variant" "latin9"
[   655.141] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[   655.141] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[   655.141] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[   655.141] (II) No input driver specified, ignoring this device.
[   655.141] (II) This device may have been added with another device file.
[   655.142] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[   655.142] (II) No input driver specified, ignoring this device.
[   655.142] (II) This device may have been added with another device file.
[   655.142] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[   655.142] (II) No input driver specified, ignoring this device.
[   655.142] (II) This device may have been added with another device file.
[   655.142] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[   655.142] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[   655.142] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[   655.200] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0
[   655.200] (**) USB Optical Mouse: always reports core events
[   655.200] (**) Option "Device" "/dev/input/event1"
[   655.200] (**) Option "_source" "server/udev"
[   655.200] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[   655.200] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[   655.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:1BCF:0007.0001/input/input3/event1"
[   655.200] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[   655.200] (**) Option "AccelerationScheme" "none"
[   655.200] (**) USB Optical Mouse: (accel) selected scheme none/0
[   655.200] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[   655.200] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[   655.201] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[   655.201] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[   655.201] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[   655.201] (II) No input driver specified, ignoring this device.
[   655.201] (II) This device may have been added with another device file.
[   655.201] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[   655.201] (II) No input driver specified, ignoring this device.
[   655.201] (II) This device may have been added with another device file.
[   655.201] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[   655.201] (II) No input driver specified, ignoring this device.
[   655.201] (II) This device may have been added with another device file.
[   655.202] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[   655.202] (II) No input driver specified, ignoring this device.
[   655.202] (II) This device may have been added with another device file.
[   655.202] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   655.202] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   655.202] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   655.202] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[   655.202] (**) AT Translated Set 2 keyboard: always reports core events
[   655.202] (**) Option "Device" "/dev/input/event0"
[   655.202] (**) Option "_source" "server/udev"
[   655.202] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   655.202] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   655.202] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   655.202] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   655.203] (**) Option "xkb_model" "pc105"
[   655.203] (**) Option "xkb_layout" "fr"
[   655.203] (**) Option "xkb_variant" "latin9"
[   655.203] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   655.203] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   655.203] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[   655.203] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   655.203] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[   655.203] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[   655.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   655.203] (**) Option "Device" "/dev/input/event2"
[   655.203] (**) Option "_source" "server/udev"
[   655.204] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is tagged by udev as: Touchpad
[   655.204] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is a touchpad
[   655.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[   655.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   655.204] (**) Option "AccelerationScheme" "none"
[   655.204] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   655.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   655.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   655.204] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is tagged by udev as: Touchpad
[   655.204] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is a touchpad
[   655.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   655.204] (II) No input driver specified, ignoring this device.
[   655.204] (II) This device may have been added with another device file.
[   655.204] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   655.204] (II) No input driver specified, ignoring this device.
[   655.204] (II) This device may have been added with another device file.
[   655.205] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event8)
[   655.205] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   655.205] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[   655.205] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 31 paused 0
[   655.205] (**) MSI WMI hotkeys: always reports core events
[   655.205] (**) Option "Device" "/dev/input/event8"
[   655.205] (**) Option "_source" "server/udev"
[   655.205] (II) input device 'MSI WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
[   655.205] (II) input device 'MSI WMI hotkeys', /dev/input/event8 is a keyboard
[   655.205] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8"
[   655.205] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 14)
[   655.205] (**) Option "xkb_model" "pc105"
[   655.205] (**) Option "xkb_layout" "fr"
[   655.205] (**) Option "xkb_variant" "latin9"
[   655.205] (II) input device 'MSI WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
[   655.205] (II) input device 'MSI WMI hotkeys', /dev/input/event8 is a keyboard
[   656.989] (II) modeset(0): EDID vendor "CMN", prod id 5941
[   656.989] (II) modeset(0): Printing DDC gathered Modelines:
[   656.989] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)
[   660.027] (II) modeset(0): EDID vendor "CMN", prod id 5941
[   660.027] (II) modeset(0): Printing DDC gathered Modelines:
[   660.027] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)
[  5082.223] (II) modeset(0): EDID vendor "CMN", prod id 5941
[  5082.223] (II) modeset(0): Printing DDC gathered Modelines:
[  5082.223] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)
[  5082.229] (II) modeset(0): EDID vendor "CMN", prod id 5941
[  5082.229] (II) modeset(0): Printing DDC gathered Modelines:
[  5082.229] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)
[  5082.234] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[  5082.234] (II) config/udev: Adding drm device (/dev/dri/card1)
[  5082.234] (II) xfree86: Adding drm device (/dev/dri/card1)
[  5082.514] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 61 paused 0
[  5082.514] (II) LoadModule: "modesetting"
[  5082.514] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  5082.515] (II) Module modesetting: vendor="X.Org Foundation"
[  5082.515]  compiled for 1.19.2, module version = 1.19.2
[  5082.515]  Module class: X.Org Video Driver
[  5082.515]  ABI class: X.Org Video Driver, version 23.0
[  5082.515] (II) UnloadModule: "modesetting"
[  5082.515] (II) Unloading modesetting
[  5082.515] (II) Failed to load module "modesetting" (already loaded, 0)
[  5082.515] (II) modeset(G0): using drv /dev/dri/card1
[  5082.530] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[  5082.530] (==) modeset(G0): RGB weight 888
[  5082.530] (==) modeset(G0): Default visual is TrueColor
[  5082.530] (II) Loading sub module "glamoregl"
[  5082.530] (II) LoadModule: "glamoregl"
[  5082.530] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  5082.530] (II) Module glamoregl: vendor="X.Org Foundation"
[  5082.530]  compiled for 1.19.2, module version = 1.0.0
[  5082.530]  ABI class: X.Org ANSI C Emulation, version 0.4
[  5082.530] (II) glamor: OpenGL accelerated X.org driver based.
[  5082.696] (II) glamor: EGL version 1.4 (DRI2):
[  5082.769] (II) modeset(G0): glamor initialized
[  5082.769] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[  5082.769] (**) modeset(G0): Display dimensions: (380, 220) mm
[  5082.770] (**) modeset(G0): DPI set to (68, 88)
[  5082.770] (II) Loading sub module "fb"
[  5082.770] (II) LoadModule: "fb"
[  5082.784] (II) Loading /usr/lib/xorg/modules/libfb.so
[  5082.784] (II) Module fb: vendor="X.Org Foundation"
[  5082.784]  compiled for 1.19.2, module version = 1.0.0
[  5082.784]  ABI class: X.Org ANSI C Emulation, version 0.4
[  5082.828] (==) modeset(G0): Backing store enabled
[  5082.828] (==) modeset(G0): Silken mouse enabled
[  5082.828] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  5082.828] (==) modeset(G0): DPMS enabled
[  5082.828] (II) modeset(G0): [DRI2] Setup complete
[  5082.828] (II) modeset(G0): [DRI2]   DRI driver: nouveau
[  5082.828] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau
[  5082.829] (II) modeset(G0): Damage tracking initialized
[  5082.829] xf86: found device 2
 



D'avance merci pour votre aide.


Laptop ASUS Rog Strix Scar II G715GV - 64bits - RAM: 16 Go
Intel Core I7 - 8750H @2.20 GHz

Hors ligne

#2 12-08-2018 12:40:58

SuShY
CA Debian-Facile
Lieu : Chartres
Distrib. : Debian Sid x86_64
Noyau : Linux > 6.0.0-2-amd64
(G)UI : i3WM - 4.21-1
Inscription : 06-01-2018
Site Web

Re : Installation pilote CGU NVidia

Hello, as-tu essayé ce wiki ? https://debian-facile.org/doc:materiel: … ia:accueil

Dernière modification par SuShY (12-08-2018 12:42:19)

Hors ligne

#3 12-08-2018 18:57:01

tlax38
Membre
Distrib. : Debian Stretch 64bits GNOME
Inscription : 24-02-2018

Re : Installation pilote CGU NVidia

Je viens de faire cette procédure; je me suis arrêté à l'étape de configuration du pilote libre car il est écrit "Si le pilote n'a pas été choisi par défaut," etc... mais je ne sais pas comment vérifier si le pilote a été choisi par défaut.

Laptop ASUS Rog Strix Scar II G715GV - 64bits - RAM: 16 Go
Intel Core I7 - 8750H @2.20 GHz

Hors ligne

#4 12-08-2018 20:10:39

SuShY
CA Debian-Facile
Lieu : Chartres
Distrib. : Debian Sid x86_64
Noyau : Linux > 6.0.0-2-amd64
(G)UI : i3WM - 4.21-1
Inscription : 06-01-2018
Site Web

Re : Installation pilote CGU NVidia

Quand tu fait la commande ci-dessous, c'est quoi le résultat ?

nvidia-detect

Hors ligne

#5 12-08-2018 20:21:22

tlax38
Membre
Distrib. : Debian Stretch 64bits GNOME
Inscription : 24-02-2018

Re : Installation pilote CGU NVidia

Detected NVIDIA GPUs:
01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 960M] [10de:139b] (rev a2)

Checking card:  NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
Your card is supported by the default drivers.
It is recommended to install the
    nvidia-driver
package.
 


Laptop ASUS Rog Strix Scar II G715GV - 64bits - RAM: 16 Go
Intel Core I7 - 8750H @2.20 GHz

Hors ligne

#6 12-08-2018 20:24:04

SuShY
CA Debian-Facile
Lieu : Chartres
Distrib. : Debian Sid x86_64
Noyau : Linux > 6.0.0-2-amd64
(G)UI : i3WM - 4.21-1
Inscription : 06-01-2018
Site Web

Re : Installation pilote CGU NVidia

Ok, dans ce cas fait ça et reboot, ca devrait fonctionner :

apt-get install nvidia-driver

Hors ligne

#7 12-08-2018 21:23:36

tlax38
Membre
Distrib. : Debian Stretch 64bits GNOME
Inscription : 24-02-2018

Re : Installation pilote CGU NVidia

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation :

Les paquets suivants contiennent des dépendances non satisfaites :
 nvidia-driver : Dépend: nvidia-driver-libs (= 384.130-1) mais ne sera pas installé ou
                          nvidia-driver-libs-nonglvnd (= 384.130-1) mais ne sera pas installé
E: Impossible de corriger les problèmes, des paquets défectueux sont en mode « garder en l'état ».
 


Laptop ASUS Rog Strix Scar II G715GV - 64bits - RAM: 16 Go
Intel Core I7 - 8750H @2.20 GHz

Hors ligne

#8 13-08-2018 22:32:24

pixia-factory
Membre
Lieu : Angers
Distrib. : siduction
Noyau : siduction kernel
(G)UI : xfce
Inscription : 19-07-2018

Re : Installation pilote CGU NVidia

Topic très intéressant que je ne manquerais pas de suivre, vous possédez une nvidia maxwell alors que je possède une génération Pascal... Avec cette techno obscure qu'est optirun/primus, vous ne passez pas par bumblebee pour l'install ? Comment ferez vous pour switcher d'une carte à l'autre ? Il y a donc un moyen de passez en chipset Intel sans planter la session en cours ? La résolution de votre topic pourrait m'aider à avancer dans le mien. J'aimerais tant une révision du tuto d'installation du pilote nvidia sur système bi-cgu sur debian facile mais je pense que je m'avance un peu. Bon courage en tout cas.

Linux ce n'est pas parce que c'est déjà fait qu'il n'y a rien à faire, Windows c'est ni fait ni à refaire !

Honor magicbook 14

Hors ligne

#9 14-08-2018 21:09:55

tlax38
Membre
Distrib. : Debian Stretch 64bits GNOME
Inscription : 24-02-2018

Re : Installation pilote CGU NVidia

@ pixia-factory: j'ai installé bumblebee en effet (enfin je crois). Pour ce qui est de switcher je ne le fais pas manuellement, je suppose que ça se fait automatiquement (si ça se fait).

Laptop ASUS Rog Strix Scar II G715GV - 64bits - RAM: 16 Go
Intel Core I7 - 8750H @2.20 GHz

Hors ligne

Pied de page des forums