[Résolu] Demarrage bloqué

Sillard · 07-03-2019 12:49:02

Bonjour.
Suite a un petit plantage j ai redemarré mon ordi. Pas en hardbootant mais en utilisant la fonction de redemarrage.
Tout c est bien passé.
J ai rentré le mdp pour le deverouillage du disque et c est apres que ca a planté.

Plus rien ne se.passe sur l ecran

La derniere ligne est :

[76.708915] bluetooth : loading patch file failed

Pouvez vous me venir en aide

Dernière modification par Sillard (10-03-2019 07:00:27)

Y316 · 07-03-2019 14:30:40

Cela va être difficile avec si peu d'informations.

J ai rentré le mdp pour le deverouillage du disque

A quel moment du processus de redémarrage ?

et c est apres que ca a planté.

:-) Planté dans la terre ou dans un pot ?

Sérieux !
Est-ce que tu peux démarrer le système et avoir accès à une console avec les touches [Ctrl + Alt + F1] ?
Si oui peux-tu te connecter en tant que root ?

Sillard · 07-03-2019 16:00:25

J ai rentré le mdp juste apres la petite invite demandant le type de demarrage : debian normal ou mode "expert".

Jusque la ca va et c est apres cela que tout s arrete.

J ai demarré a nouveau dans le second mode. J ai pu rentré mon mdp de SU et pour le moment je sauvegarde toutes mes donnees sur DD.

J ai essayé de lancer l interface graphique mais sans y parvenir.

Y316 · 07-03-2019 16:20:59

pour le moment je sauvegarde toutes mes donnees sur DD.

Trés bon reflex.
Quand ce sera fini, tu pourras renseigner ton profil et exécuter quelques diagnostics avec les commandes de cette page :
https://debian-facile.org/doc:systeme:i … -son-noyau

Quand cela sera fait tu pourras tenter un

startx

et ensuite de nouveau

dmesg

pour savoir ce qu'il se passe.
Post nous les réponses.

anonyme · 07-03-2019 18:22:26

Bonjour
inutile le startx , il précise qu il a déjà testé
le mode dépannage fonctionne bien , c'est déjà ça
selon ton bureau et ton gestionnaire de connexion que donne cette commande a partir du mdp "su" (donc en mode dépannage )
pour lightdm par exemple

service lightdm start

 

ps: pour gdm3 tu remplace "lightdm" par "gdm3"
dans la console tu devrais avoir des messages peu être
ça ressemble a un souci de driver vidéo
selon ton bureau tu peu visualiser en mode dépannage le Xorg.0.log
pour gdm3 dans /home/tonuser/.local/share/xorg/Xorg.0.log
pour lightdm dans /var/log/Xorg.0.log
a visualiser avec la commande "cat" par exemple ou l' envoyer dans un fichier

Sillard · 08-03-2019 08:22:58

Bonjour tout le monde.
Alors pour commencer j ai recuperé ma version de debian :
Debian4.9.0-8 AMD64 SMP debian 4.9.144-3.1 (19.02.2019)

Par contre impossible de recupérer ma version de gestionnaire de fenetre.

A tout a l heure pour la suite

Sillard · 08-03-2019 08:27:48

Si je lance :

service lightdm start

Il me repond que le service n a pas ete trouvé.

Si je lance

service gdm3 start

Aucun message... rien... l invite de commande revient juste en dessous

Edit à toto : J'ai édité ton message pour le rendre plus lisible. Je te laisse cliquer sur le lien Modifier au bas à droite de ce post pour voir comment le bb-code est utilisé pour ça.
Voir le tuto : Le code, ça pique moins les yeux en couleur

Sillard · 08-03-2019 08:34:57

anonyme a écrit :

Bonjour
inutile le startx , il précise qu il a déjà testé
le mode dépannage fonctionne bien , c'est déjà ça
selon ton bureau et ton gestionnaire de connexion que donne cette commande a partir du mdp "su" (donc en mode dépannage )
pour lightdm par exemple

service lightdm start

ps: pour gdm3 tu remplace "lightdm" par "gdm3"
dans la console tu devrais avoir des messages peu être
ça ressemble a un souci de driver vidéo
selon ton bureau tu peu visualiser en mode dépannage le Xorg.0.log
pour gdm3 dans /home/tonuser/.local/share/xorg/Xorg.0.log
pour lightdm dans /var/log/Xorg.0.log
a visualiser avec la commande "cat" par exemple ou l' envoyer dans un fichier

Et que dois je chercher dans ce fichier?

smolski · 08-03-2019 08:39:29

Sillard a écrit :

Et que dois je chercher dans ce fichier?

Tu envoies la commande cat indiquée et tu recopies tout (ou une grande partie de la fin...) le contenu de la sortie, ou, si tu le peux, seulement la partie qui concerne le problème.

cat ~/.local/share/xorg/Xorg.0.log

cat /var/log/Xorg.0.log

Les tutos :
https://debian-facile.org/doc:systeme:cat
https://debian-facile.org/doc:systeme-log

Force et courage

Dernière modification par smolski (08-03-2019 08:44:45)

Sillard · 08-03-2019 09:02:51

Ok alors je vais recopier car j ai pas moyen de copier / coller... suis sur mon tel a l heure actuelle

anonyme · 08-03-2019 09:32:42

Bonjour
donne le bureau que tu utilise ?
par exemple pour gnome une recherche sur gdm3

apt-cache policy gdm3

 

nota: je ne me souvient jamais du nom de celui de KDE pour le gestionnaire de connexion
sinon idem pour lightdm (mate , xfce4 etc ... pour les bureaux ).

tu peu donner aussi en plus du bureau , la carte graphique que tu utilise et le driver , machine de bureau ou portable ?

après relecture de ton #7 tu peu regarder le status (après le start )

service gdm3 status

 

il semble que tu utilise gdm3

Dernière modification par anonyme (08-03-2019 10:19:45)

Sillard · 08-03-2019 10:50:52

smolski a écrit :

Sillard a écrit :
Et que dois je chercher dans ce fichier?

Tu envoies la commande cat indiquée et tu recopies tout (ou une grande partie de la fin...) le contenu de la sortie, ou, si tu le peux, seulement la partie qui concerne le problème.
cat ~/.local/share/xorg/Xorg.0.log

cat /var/log/Xorg.0.log

Les tutos :
https://debian-facile.org/doc:systeme:cat
https://debian-facile.org/doc:systeme-log

Force et courage

Donc j ai affiché ce fichier et les erreurs que j ai sont les suivantes :

Load module: "nv"
Warning, couldn't open module nv
Unload module: "nv"
Unloading nv

Et

Falling back to old probe methodfor vesa
VGA arbiter: cannot open kernel arbiter, no multicard support

C est tout

Sillard · 08-03-2019 10:59:49

anonyme a écrit :

Bonjour
donne le bureau que tu utilise ?
par exemple pour gnome une recherche sur gdm3

apt-cache policy gdm3

nota: je ne me souvient jamais du nom de celui de KDE pour le gestionnaire de connexion
sinon idem pour lightdm (mate , xfce4 etc ... pour les bureaux ).

tu peu donner aussi en plus du bureau , la carte graphique que tu utilise et le driver , machine de bureau ou portable ?

après relecture de ton #7 tu peu regarder le status (après le start )

service gdm3 status

il semble que tu utilise gdm3

Alors apres la premiere commande :

Gdm3:
Installé : 3.22.3-3+deb9u2
Candidat : 3.22.3-3+deb9u2

Pour la seconde commande:

Il est actif mais j ai cette ligne :

Couldn't connect to system bus : impossible de se connecter : aucun fichier ou dossier de ce type

Y316 · 08-03-2019 11:04:49

Sillard a écrit :

Ok alors je vais recopier car j ai pas moyen de copier / coller... suis sur mon tel a l heure actuelle

Une facilité consiste à "écrire" le résultat d'une commande dans un fichier plutôt que sur l'écran.
Exemple

cat /var/log/Xorg.0.log

affiche à l'écran le contenu du log du serveur Xorg.

La commande

cat /var/log/Xorg.0.log > /depannageX

va écrire le résultat de la commande dans un fichier que j'ai appelé arbitrairement depannageX et que j'ai placé dans "/".
Le fichier en question n'a pas besoin d'être créé avant.
Si cela t'arrange tu peux l'enregistrer où tu veux sous n'importe quel nom. Exemples :

cat /var/log/Xorg.0.log > /home/tonuser/Bureau/panne

service gdm3 status > /depannageGDM

Pour le reste, je laisse la main aux spécialistes.

Douceur et tranquillité. :-)

Sillard · 08-03-2019 11:07:32

Y316 a écrit :

Sillard a écrit :
Ok alors je vais recopier car j ai pas moyen de copier / coller... suis sur mon tel a l heure actuelle
Une facilité consiste à "écrire" le résultat d'une commande dans un fichier plutôt que sur l'écran.
Exemple
cat /var/log/Xorg.0.log
affiche à l'écran le contenu du log du serveur Xorg.

La commande
cat /var/log/Xorg.0.log > /depannageX
va écrire le résultat de la commande dans un fichier que j'ai appelé arbitrairement depannageX et que j'ai placé dans "/".
Le fichier en question n'a pas besoin d'être créé avant.
Si cela t'arrange tu peux l'enregistrer où tu veux sous n'importe quel nom. Exemples :
cat /var/log/Xorg.0.log > /home/tonuser/Bureau/panne
service gdm3 status > /depannageGDM

Pour le reste, je laisse la main aux spécialistes.

Douceur et tranquillité. :-)

Merci pour cette information, j'essaierai de mettre en pratique

Sillard · 08-03-2019 11:10:18

Bon alors, cette ligne m'a mis la puce à l'oreille:

VGA arbiter: cannot open kernel arbiter, no multicard support

Ce que j'ai oublié de vous dire, c'est que d'habitude, je suis en multiecran (2) et lors de ma "panne", mon second écran était déconnecté.

Je viens de le reconnecter, et du coup il a démarré normalement on va dire, même si je l'ai trouvé un peu lent.

mais ça ne me donne pas la solution du pourquoi maintenant il ne veut plus démarré en simple écran????

Y316 · 08-03-2019 11:30:17

Si ton systeme fonctionne un peu, pense à renvoyer les résultats des commandes demandées plus haut par anonyme et smolsky.
Ce sera plus facile pour eux.

Et en testant l'écran2 en place de écran1 ?

anonyme · 08-03-2019 11:41:28

tu n'a pas un xorg.conf ?
dans /etc/X11/ ou dans /etc/X11/xorg.conf.d/tonfichier.conf

c'est le coup classique

sinon le log complet Xorg.0.log permet de mieux comprendre ( a la rigueur la fin avec les "inputs" ne nous intéresse pas trop , peuvent être ignoré)

Dernière modification par anonyme (08-03-2019 11:46:58)

Sillard · 08-03-2019 12:05:47

Y316 a écrit :

Si ton systeme fonctionne un peu, pense à renvoyer les résultats des commandes demandées plus haut par anonyme et smolsky.
Ce sera plus facile pour eux.

Et en testant l'écran2 en place de écran1 ?

oui je m'y colle de suite et mettre à jour mon profil aussi ça sera plus simple maintenant.

Sillard · 08-03-2019 12:10:43

anonyme a écrit :

tu n'a pas un xorg.conf ?
dans /etc/X11/ ou dans /etc/X11/xorg.conf.d/tonfichier.conf

c'est le coup classique

non, voilà ce que j'ai dans /etc/X11/ :
root@debian:/etc#

cd X11/

root@debian:/etc/X11#

ls -l

total 76

drwxr-xr-x 2 root root  4096 janv. 19 07:59 app-defaults

-rw-r--r-- 1 root root    15 janv. 19 08:02 default-display-manager

drwxr-xr-x 6 root root  4096 janv. 19 07:54 fonts

-rw-r--r-- 1 root root 17394 nov.  23  2016 rgb.txt

drwxr-xr-x 2 root root  4096 janv. 19 07:58 xinit

drwxr-xr-x 2 root root  4096 juil. 18  2017 xkb

-rwxr-xr-x 1 root root   709 nov.  23  2016 Xreset

drwxr-xr-x 2 root root  4096 janv. 19 07:42 Xreset.d

drwxr-xr-x 2 root root  4096 janv. 19 07:42 Xresources

-rwxr-xr-x 1 root root  3517 nov.  23  2016 Xsession

drwxr-xr-x 2 root root  4096 mars   3 07:17 Xsession.d

-rw-r--r-- 1 root root   265 nov.  23  2016 Xsession.options

drwxr-xr-x 2 root root  4096 janv. 19 07:58 xsm

-rw-r--r-- 1 root root    13 déc.   5  2016 XvMCConfig

-rw-r--r-- 1 root root   630 janv. 19 07:59 Xwrapper.config

Edit à toto : J'ai édité ton message pour le rendre plus lisible en séparant la commande seule de son retour. Je te laisse cliquer sur le lien Modifier au bas à droite de ce post pour voir comment le bb-code est utilisé pour ça.
Voir le tuto : Le code, ça pique moins les yeux en couleur

Dernière modification par Sillard (08-03-2019 12:11:35)

Sillard · 08-03-2019 12:15:53

anonyme a écrit :

sinon le log complet Xorg.0.log permet de mieux comprendre ( a la rigueur la fin avec les "inputs" ne nous intéresse pas trop , peuvent être ignoré)

Voilà

root@debian:/#

cat /var/log/Xorg.0.log

[ 12278.853] 

X.Org X Server 1.19.2

Release Date: 2017-03-02

[ 12278.858] X Protocol Version 11, Revision 0

[ 12278.860] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian

[ 12278.862] Current Operating System: Linux debian 4.9.0-8-amd64 #1 SMP Debian 4.9.144-3.1 (2019-02-19) x86_64

[ 12278.862] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/debian--vg-root ro single

[ 12278.865] Build Date: 03 November 2018  03:09:11AM

[ 12278.867] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support) 

[ 12278.869] Current version of pixman: 0.34.0

[ 12278.872]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[ 12278.872] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[ 12278.879] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar  7 17:13:39 2019

[ 12278.903] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[ 12278.945] (==) No Layout section.  Using the first Screen section.

[ 12278.946] (==) No screen section available. Using defaults.

[ 12278.946] (**) |-->Screen "Default Screen Section" (0)

[ 12278.946] (**) |   |-->Monitor "<default monitor>"

[ 12278.965] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[ 12278.965] (==) Automatically adding devices

[ 12278.965] (==) Automatically enabling devices

[ 12278.965] (==) Automatically adding GPU devices

[ 12278.965] (==) Max clients allowed: 256, resource mask: 0x1fffff

[ 12279.020] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[ 12279.020]  Entry deleted from font path.

[ 12279.067] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[ 12279.067] (==) ModulePath set to "/usr/lib/xorg/modules"

[ 12279.067] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[ 12279.067] (II) Loader magic: 0x5557ce2f1e00

[ 12279.067] (II) Module ABI versions:

[ 12279.067]  X.Org ANSI C Emulation: 0.4

[ 12279.067]  X.Org Video Driver: 23.0

[ 12279.067]  X.Org XInput driver : 24.1

[ 12279.067]  X.Org Server Extension : 10.0

[ 12279.067] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)

[ 12279.067] (++) using VT number 1

[ 12279.069] (II) xfree86: Adding drm device (/dev/dri/card1)

[ 12279.069] (II) xfree86: Adding drm device (/dev/dri/card0)

[ 12279.073] (--) PCI:*(0:0:2:0) 8086:0166:1043:1477 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072

[ 12279.073] (--) PCI: (0:1:0:0) 10de:0fdf:1043:1477 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288

[ 12279.073] (II) LoadModule: "glx"

[ 12279.082] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[ 12279.305] (II) Module glx: vendor="X.Org Foundation"

[ 12279.305]  compiled for 1.19.2, module version = 1.0.0

[ 12279.305]  ABI class: X.Org Server Extension, version 10.0

[ 12279.305] (==) Matched nouveau as autoconfigured driver 0

[ 12279.305] (==) Matched nv as autoconfigured driver 1

[ 12279.305] (==) Matched modesetting as autoconfigured driver 2

[ 12279.305] (==) Matched fbdev as autoconfigured driver 3

[ 12279.305] (==) Matched vesa as autoconfigured driver 4

[ 12279.305] (==) Assigned the driver to the xf86ConfigLayout

[ 12279.305] (II) LoadModule: "nouveau"

[ 12279.306] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so

[ 12279.342] (II) Module nouveau: vendor="X.Org Foundation"

[ 12279.342]  compiled for 1.19.3, module version = 1.0.13

[ 12279.342]  Module class: X.Org Video Driver

[ 12279.342]  ABI class: X.Org Video Driver, version 23.0

[ 12279.342] (II) LoadModule: "nv"

[ 12279.342] (WW) Warning, couldn't open module nv

[ 12279.342] (II) UnloadModule: "nv"

[ 12279.342] (II) Unloading nv

[ 12279.342] (EE) Failed to load module "nv" (module does not exist, 0)

[ 12279.342] (II) LoadModule: "modesetting"

[ 12279.342] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[ 12279.343] (II) Module modesetting: vendor="X.Org Foundation"

[ 12279.344]  compiled for 1.19.2, module version = 1.19.2

[ 12279.344]  Module class: X.Org Video Driver

[ 12279.344]  ABI class: X.Org Video Driver, version 23.0

[ 12279.344] (II) LoadModule: "fbdev"

[ 12279.344] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[ 12279.352] (II) Module fbdev: vendor="X.Org Foundation"

[ 12279.352]  compiled for 1.19.0, module version = 0.4.4

[ 12279.352]  Module class: X.Org Video Driver

[ 12279.352]  ABI class: X.Org Video Driver, version 23.0

[ 12279.352] (II) LoadModule: "vesa"

[ 12279.352] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[ 12279.365] (II) Module vesa: vendor="X.Org Foundation"

[ 12279.365]  compiled for 1.19.0, module version = 2.3.4

[ 12279.365]  Module class: X.Org Video Driver

[ 12279.365]  ABI class: X.Org Video Driver, version 23.0

[ 12279.365] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400

[ 12279.365] (II) NOUVEAU driver for NVIDIA chipset families :

[ 12279.365]  RIVA TNT        (NV04)

[ 12279.365]  RIVA TNT2       (NV05)

[ 12279.365]  GeForce 256     (NV10)

[ 12279.365]  GeForce 2       (NV11, NV15)

[ 12279.365]  GeForce 4MX     (NV17, NV18)

[ 12279.365]  GeForce 3       (NV20)

[ 12279.365]  GeForce 4Ti     (NV25, NV28)

[ 12279.365]  GeForce FX      (NV3x)

[ 12279.365]  GeForce 6       (NV4x)

[ 12279.365]  GeForce 7       (G7x)

[ 12279.365]  GeForce 8       (G8x)

[ 12279.365]  GeForce GTX 200 (NVA0)

[ 12279.365]  GeForce GTX 400 (NVC0)

[ 12279.365] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[ 12279.365] (II) FBDEV: driver for framebuffer: fbdev

[ 12279.365] (II) VESA: driver for VESA chipsets: vesa

[ 12279.366] (II) [drm] nouveau interface version: 1.3.1

[ 12279.371] (II) modeset(0): using drv /dev/dri/card0

[ 12279.371] (WW) Falling back to old probe method for fbdev

[ 12279.371] (II) Loading sub module "fbdevhw"

[ 12279.371] (II) LoadModule: "fbdevhw"

[ 12279.372] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[ 12279.399] (II) Module fbdevhw: vendor="X.Org Foundation"

[ 12279.400]  compiled for 1.19.2, module version = 0.0.2

[ 12279.400]  ABI class: X.Org Video Driver, version 23.0

[ 12279.400] (WW) Falling back to old probe method for vesa

[ 12279.400] (II) modeset(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[ 12279.400] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[ 12279.400] (==) modeset(0): RGB weight 888

[ 12279.400] (==) modeset(0): Default visual is TrueColor

[ 12279.400] (II) Loading sub module "glamoregl"

[ 12279.400] (II) LoadModule: "glamoregl"

[ 12279.400] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[ 12279.572] (II) Module glamoregl: vendor="X.Org Foundation"

[ 12279.573]  compiled for 1.19.2, module version = 1.0.0

[ 12279.573]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 12279.573] (II) glamor: OpenGL accelerated X.org driver based.

[ 12279.924] (II) glamor: EGL version 1.4 (DRI2):

[ 12280.092] (II) modeset(0): glamor initialized

[ 12280.093] (II) modeset(0): Output LVDS-1 has no monitor section

[ 12280.094] (II) modeset(0): Output VGA-1 has no monitor section

[ 12280.096] (II) modeset(0): Output HDMI-1 has no monitor section

[ 12280.096] (II) modeset(0): Output DP-1 has no monitor section

[ 12280.096] (II) modeset(0): EDID for output LVDS-1

[ 12280.096] (II) modeset(0): Manufacturer: AUO  Model: 129e  Serial#: 0

[ 12280.096] (II) modeset(0): Year: 2011  Week: 0

[ 12280.096] (II) modeset(0): EDID Version: 1.4

[ 12280.096] (II) modeset(0): Digital Display Input

[ 12280.096] (II) modeset(0): 6 bits per channel

[ 12280.096] (II) modeset(0): Digital interface is undefined

[ 12280.096] (II) modeset(0): Max Image Size [cm]: horiz.: 38  vert.: 21

[ 12280.096] (II) modeset(0): Gamma: 2.20

[ 12280.096] (II) modeset(0): No DPMS capabilities specified

[ 12280.096] (II) modeset(0): Supported color encodings: RGB 4:4:4 

[ 12280.096] (II) modeset(0): First detailed timing is preferred mode

[ 12280.096] (II) modeset(0): Preferred mode is native pixel format and refresh rate

[ 12280.096] (II) modeset(0): redX: 0.620 redY: 0.340   greenX: 0.325 greenY: 0.570

[ 12280.096] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329

[ 12280.096] (II) modeset(0): Manufacturer's mask: 0

[ 12280.096] (II) modeset(0): Supported detailed timing:

[ 12280.096] (II) modeset(0): clock: 97.5 MHz   Image Size:  382 x 214 mm

[ 12280.096] (II) modeset(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1754 h_border: 0

[ 12280.096] (II) modeset(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 926 v_border: 0

[ 12280.096] (II) modeset(0): Unknown vendor-specific block f

[ 12280.096] (II) modeset(0):  AUO

[ 12280.096] (II) modeset(0):  B173RTN01.2

[ 12280.096] (II) modeset(0): EDID (in hex):

[ 12280.096] (II) modeset(0):   00ffffffffffff0006af9e1200000000

[ 12280.096] (II) modeset(0):   001501049026157802c4959e57539226

[ 12280.096] (II) modeset(0):   0f505400000001010101010101010101

[ 12280.096] (II) modeset(0):   0101010101011b26409a60841a303020

[ 12280.096] (II) modeset(0):   36007ed6100000180000000f00000000

[ 12280.096] (II) modeset(0):   00000000000000000020000000fe0041

[ 12280.096] (II) modeset(0):   554f0a202020202020202020000000fe

[ 12280.096] (II) modeset(0):   004231373352544e30312e32200a00e5

[ 12280.096] (II) modeset(0): Printing probed modes for output LVDS-1

[ 12280.096] (II) modeset(0): Modeline "1600x900"x60.1   97.55  1600 1648 1680 1754  900 903 909 926 -hsync -vsync (55.6 kHz eP)

[ 12280.096] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)

[ 12280.097] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)

[ 12280.097] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)

[ 12280.097] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)

[ 12280.097] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)

[ 12280.097] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)

[ 12280.097] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)

[ 12280.097] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)

[ 12280.097] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)

[ 12280.097] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)

[ 12280.097] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)

[ 12280.097] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)

[ 12280.097] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)

[ 12280.097] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)

[ 12280.097] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)

[ 12280.097] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)

[ 12280.097] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)

[ 12280.097] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)

[ 12280.097] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)

[ 12280.097] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)

[ 12280.097] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)

[ 12280.097] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[ 12280.097] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)

[ 12280.097] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)

[ 12280.097] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)

[ 12280.097] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)

[ 12280.097] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)

[ 12280.097] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)

[ 12280.097] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)

[ 12280.098] (II) modeset(0): EDID for output VGA-1

[ 12280.100] (II) modeset(0): EDID for output HDMI-1

[ 12280.100] (II) modeset(0): EDID for output DP-1

[ 12280.100] (II) modeset(0): Output LVDS-1 connected

[ 12280.100] (II) modeset(0): Output VGA-1 disconnected

[ 12280.100] (II) modeset(0): Output HDMI-1 disconnected

[ 12280.100] (II) modeset(0): Output DP-1 disconnected

[ 12280.100] (II) modeset(0): Using exact sizes for initial modes

[ 12280.100] (II) modeset(0): Output LVDS-1 using initial mode 1600x900 +0+0

[ 12280.100] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[ 12280.100] (==) modeset(0): DPI set to (96, 96)

[ 12280.100] (II) Loading sub module "fb"

[ 12280.100] (II) LoadModule: "fb"

[ 12280.100] (II) Loading /usr/lib/xorg/modules/libfb.so

[ 12280.126] (II) Module fb: vendor="X.Org Foundation"

[ 12280.126]  compiled for 1.19.2, module version = 1.0.0

[ 12280.126]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 12280.126] (II) Loading sub module "dri2"

[ 12280.126] (II) LoadModule: "dri2"

[ 12280.126] (II) Module "dri2" already built-in

[ 12280.126] (--) NOUVEAU(G0): Chipset: "NVIDIA NVE7"

[ 12280.126] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32

[ 12280.126] (==) NOUVEAU(G0): RGB weight 888

[ 12280.126] (==) NOUVEAU(G0): Default visual is TrueColor

[ 12280.126] (==) NOUVEAU(G0): Using HW cursor

[ 12280.126] (==) NOUVEAU(G0): Allowed maximum DRI level 2.

[ 12280.126] (==) NOUVEAU(G0): GLX sync to VBlank enabled.

[ 12280.126] (==) NOUVEAU(G0): Page flipping enabled

[ 12280.126] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]

[ 12280.126] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.

[ 12280.126] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)

[ 12280.126] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)

[ 12280.126] (**) NOUVEAU(G0):  Mode "1600x900": 118.2 MHz (scaled from 0.0 MHz), 56.0 kHz, 59.9 Hz

[ 12280.127] (II) NOUVEAU(G0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz)

[ 12280.127] (==) NOUVEAU(G0): DPI set to (96, 96)

[ 12280.127] (II) Loading sub module "fb"

[ 12280.127] (II) LoadModule: "fb"

[ 12280.127] (II) Loading /usr/lib/xorg/modules/libfb.so

[ 12280.127] (II) Module fb: vendor="X.Org Foundation"

[ 12280.127]  compiled for 1.19.2, module version = 1.0.0

[ 12280.127]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 12280.127] (II) Loading sub module "shadowfb"

[ 12280.127] (II) LoadModule: "shadowfb"

[ 12280.127] (II) Loading /usr/lib/xorg/modules/libshadowfb.so

[ 12280.144] (II) Module shadowfb: vendor="X.Org Foundation"

[ 12280.144]  compiled for 1.19.2, module version = 1.0.0

[ 12280.144]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 12280.144] (II) UnloadModule: "fbdev"

[ 12280.144] (II) Unloading fbdev

[ 12280.144] (II) UnloadSubModule: "fbdevhw"

[ 12280.144] (II) Unloading fbdevhw

[ 12280.144] (II) UnloadModule: "vesa"

[ 12280.144] (II) Unloading vesa

[ 12280.144] (==) Depth 24 pixmap format is 32 bpp

[ 12280.509] (II) NOUVEAU(G0): Channel setup complete.

[ 12280.534] (II) NOUVEAU(G0): [COPY] async initialised.

[ 12280.593] (II) NOUVEAU(G0): Hardware support for Present enabled

[ 12280.593] (II) NOUVEAU(G0): [DRI2] Setup complete

[ 12280.593] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau

[ 12280.593] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau

[ 12280.593] (II) Loading sub module "exa"

[ 12280.593] (II) LoadModule: "exa"

[ 12280.593] (II) Loading /usr/lib/xorg/modules/libexa.so

[ 12280.596] (II) Module exa: vendor="X.Org Foundation"

[ 12280.596]  compiled for 1.19.2, module version = 2.6.0

[ 12280.596]  ABI class: X.Org Video Driver, version 23.0

[ 12280.597] (II) EXA(256): Driver allocated offscreen pixmaps

[ 12280.597] (II) EXA(256): Driver registered support for the following operations:

[ 12280.597] (II)         Solid

[ 12280.597] (II)         Copy

[ 12280.597] (II)         Composite (RENDER acceleration)

[ 12280.597] (II)         UploadToScreen

[ 12280.597] (II)         DownloadFromScreen

[ 12280.597] (==) NOUVEAU(G0): Backing store enabled

[ 12280.597] (==) NOUVEAU(G0): Silken mouse enabled

[ 12280.597] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.

[ 12280.597] (II) NOUVEAU(G0): [XvMC] Extension initialized.

[ 12280.597] (==) NOUVEAU(G0): DPMS enabled

[ 12280.597] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.

[ 12280.745] (==) modeset(0): Backing store enabled

[ 12280.745] (==) modeset(0): Silken mouse enabled

[ 12280.745] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[ 12280.745] (==) modeset(0): DPMS enabled

[ 12280.745] (II) modeset(0): [DRI2] Setup complete

[ 12280.745] (II) modeset(0): [DRI2]   DRI driver: i965

[ 12280.745] (II) modeset(0): [DRI2]   VDPAU driver: i965

[ 12280.745] (--) RandR disabled

[ 12280.762] (II) SELinux: Disabled on system

[ 12280.767] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[ 12280.767] (II) AIGLX: enabled GLX_ARB_create_context

[ 12280.767] (II) AIGLX: enabled GLX_ARB_create_context_profile

[ 12280.767] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile

[ 12280.767] (II) AIGLX: enabled GLX_INTEL_swap_event

[ 12280.767] (II) AIGLX: enabled GLX_SGI_swap_control

[ 12280.768] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[ 12280.768] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[ 12280.768] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float

[ 12280.768] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[ 12280.768] (II) AIGLX: enabled GLX_ARB_create_context_robustness

[ 12280.768] (II) AIGLX: Loaded and initialized i965

[ 12280.768] (II) GLX: Initialized DRI2 GL provider for screen 0

[ 12280.768] (II) NOUVEAU(G0): NVEnterVT is called.

[ 12280.787] (II) modeset(0): Damage tracking initialized

[ 12280.787] (II) modeset(0): Setting screen physical size to 423 x 238

[ 12281.295] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[ 12281.295] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[ 12281.295] (II) LoadModule: "libinput"

[ 12281.295] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[ 12281.592] (II) Module libinput: vendor="X.Org Foundation"

[ 12281.592]  compiled for 1.19.0, module version = 0.23.0

[ 12281.592]  Module class: X.Org XInput Driver

[ 12281.592]  ABI class: X.Org XInput driver, version 24.1

[ 12281.592] (II) Using input driver 'libinput' for 'Power Button'

[ 12281.592] (**) Power Button: always reports core events

[ 12281.592] (**) Option "Device" "/dev/input/event5"

[ 12281.592] (**) Option "_source" "server/udev"

[ 12281.593] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[ 12281.593] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[ 12281.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event5"

[ 12281.624] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[ 12281.624] (**) Option "xkb_model" "pc105"

[ 12281.624] (**) Option "xkb_layout" "fr"

[ 12281.624] (**) Option "xkb_variant" "latin9"

[ 12281.690] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[ 12281.690] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[ 12281.690] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event6)

[ 12281.690] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"

[ 12281.691] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'

[ 12281.691] (**) Asus Wireless Radio Control: always reports core events

[ 12281.691] (**) Option "Device" "/dev/input/event6"

[ 12281.691] (**) Option "_source" "server/udev"

[ 12281.691] (II) input device 'Asus Wireless Radio Control', /dev/input/event6 is tagged by udev as: Keyboard

[ 12281.691] (II) input device 'Asus Wireless Radio Control', /dev/input/event6 is a keyboard

[ 12281.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input13/event6"

[ 12281.732] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)

[ 12281.732] (**) Option "xkb_model" "pc105"

[ 12281.732] (**) Option "xkb_layout" "fr"

[ 12281.732] (**) Option "xkb_variant" "latin9"

[ 12281.733] (II) input device 'Asus Wireless Radio Control', /dev/input/event6 is tagged by udev as: Keyboard

[ 12281.733] (II) input device 'Asus Wireless Radio Control', /dev/input/event6 is a keyboard

[ 12281.733] (II) config/udev: Adding input device Video Bus (/dev/input/event10)

[ 12281.734] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[ 12281.734] (II) Using input driver 'libinput' for 'Video Bus'

[ 12281.734] (**) Video Bus: always reports core events

[ 12281.734] (**) Option "Device" "/dev/input/event10"

[ 12281.734] (**) Option "_source" "server/udev"

[ 12281.734] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard

[ 12281.734] (II) input device 'Video Bus', /dev/input/event10 is a keyboard

[ 12281.768] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17/event10"

[ 12281.768] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)

[ 12281.768] (**) Option "xkb_model" "pc105"

[ 12281.768] (**) Option "xkb_layout" "fr"

[ 12281.768] (**) Option "xkb_variant" "latin9"

[ 12281.769] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard

[ 12281.769] (II) input device 'Video Bus', /dev/input/event10 is a keyboard

[ 12281.770] (II) config/udev: Adding input device Video Bus (/dev/input/event9)

[ 12281.770] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[ 12281.770] (II) Using input driver 'libinput' for 'Video Bus'

[ 12281.770] (**) Video Bus: always reports core events

[ 12281.770] (**) Option "Device" "/dev/input/event9"

[ 12281.770] (**) Option "_source" "server/udev"

[ 12281.770] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard

[ 12281.770] (II) input device 'Video Bus', /dev/input/event9 is a keyboard

[ 12281.800] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input16/event9"

[ 12281.800] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)

[ 12281.800] (**) Option "xkb_model" "pc105"

[ 12281.800] (**) Option "xkb_layout" "fr"

[ 12281.800] (**) Option "xkb_variant" "latin9"

[ 12281.801] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard

[ 12281.801] (II) input device 'Video Bus', /dev/input/event9 is a keyboard

[ 12281.801] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)

[ 12281.802] (II) No input driver specified, ignoring this device.

[ 12281.802] (II) This device may have been added with another device file.

[ 12281.802] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)

[ 12281.802] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[ 12281.802] (II) Using input driver 'libinput' for 'Sleep Button'

[ 12281.802] (**) Sleep Button: always reports core events

[ 12281.802] (**) Option "Device" "/dev/input/event4"

[ 12281.802] (**) Option "_source" "server/udev"

[ 12281.803] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard

[ 12281.803] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard

[ 12281.832] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input11/event4"

[ 12281.832] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)

[ 12281.832] (**) Option "xkb_model" "pc105"

[ 12281.832] (**) Option "xkb_layout" "fr"

[ 12281.832] (**) Option "xkb_variant" "latin9"

[ 12281.833] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard

[ 12281.833] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard

[ 12281.835] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)

[ 12281.835] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"

[ 12281.835] (II) Using input driver 'libinput' for 'USB Optical Mouse'

[ 12281.835] (**) USB Optical Mouse: always reports core events

[ 12281.835] (**) Option "Device" "/dev/input/event1"

[ 12281.835] (**) Option "_source" "server/udev"

[ 12281.892] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse

[ 12281.892] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps

[ 12281.924] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:1BCF:0005.0001/input/input9/event1"

[ 12281.924] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)

[ 12281.924] (**) Option "AccelerationScheme" "none"

[ 12281.924] (**) USB Optical Mouse: (accel) selected scheme none/0

[ 12281.924] (**) USB Optical Mouse: (accel) acceleration factor: 2.000

[ 12281.924] (**) USB Optical Mouse: (accel) acceleration threshold: 4

[ 12281.984] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse

[ 12281.984] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps

[ 12281.986] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)

[ 12281.986] (II) No input driver specified, ignoring this device.

[ 12281.986] (II) This device may have been added with another device file.

[ 12281.987] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event15)

[ 12281.987] (**) ASUS USB2.0 Webcam: Applying InputClass "libinput keyboard catchall"

[ 12281.987] (II) Using input driver 'libinput' for 'ASUS USB2.0 Webcam'

[ 12281.987] (**) ASUS USB2.0 Webcam: always reports core events

[ 12281.987] (**) Option "Device" "/dev/input/event15"

[ 12281.987] (**) Option "_source" "server/udev"

[ 12281.988] (II) input device 'ASUS USB2.0 Webcam', /dev/input/event15 is tagged by udev as: Keyboard

[ 12281.988] (II) input device 'ASUS USB2.0 Webcam', /dev/input/event15 is a keyboard

[ 12282.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22/event15"

[ 12282.024] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 12)

[ 12282.024] (**) Option "xkb_model" "pc105"

[ 12282.024] (**) Option "xkb_layout" "fr"

[ 12282.024] (**) Option "xkb_variant" "latin9"

[ 12282.025] (II) input device 'ASUS USB2.0 Webcam', /dev/input/event15 is tagged by udev as: Keyboard

[ 12282.025] (II) input device 'ASUS USB2.0 Webcam', /dev/input/event15 is a keyboard

[ 12282.026] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)

[ 12282.026] (II) No input driver specified, ignoring this device.

[ 12282.026] (II) This device may have been added with another device file.

[ 12282.026] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)

[ 12282.026] (II) No input driver specified, ignoring this device.

[ 12282.026] (II) This device may have been added with another device file.

[ 12282.027] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)

[ 12282.027] (II) No input driver specified, ignoring this device.

[ 12282.027] (II) This device may have been added with another device file.

[ 12282.027] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)

[ 12282.027] (II) No input driver specified, ignoring this device.

[ 12282.027] (II) This device may have been added with another device file.

[ 12282.028] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)

[ 12282.028] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"

[ 12282.028] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'

[ 12282.028] (**) Asus WMI hotkeys: always reports core events

[ 12282.028] (**) Option "Device" "/dev/input/event8"

[ 12282.028] (**) Option "_source" "server/udev"

[ 12282.029] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard

[ 12282.029] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is a keyboard

[ 12282.064] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8"

[ 12282.064] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)

[ 12282.064] (**) Option "xkb_model" "pc105"

[ 12282.064] (**) Option "xkb_layout" "fr"

[ 12282.064] (**) Option "xkb_variant" "latin9"

[ 12282.065] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard

[ 12282.065] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is a keyboard

[ 12282.066] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[ 12282.066] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[ 12282.066] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[ 12282.066] (**) AT Translated Set 2 keyboard: always reports core events

[ 12282.066] (**) Option "Device" "/dev/input/event0"

[ 12282.066] (**) Option "_source" "server/udev"

[ 12282.066] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[ 12282.066] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[ 12282.104] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[ 12282.104] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)

[ 12282.104] (**) Option "xkb_model" "pc105"

[ 12282.104] (**) Option "xkb_layout" "fr"

[ 12282.104] (**) Option "xkb_variant" "latin9"

[ 12282.105] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[ 12282.105] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[ 12282.106] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event2)

[ 12282.106] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"

[ 12282.106] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'

[ 12282.106] (**) ETPS/2 Elantech Touchpad: always reports core events

[ 12282.106] (**) Option "Device" "/dev/input/event2"

[ 12282.106] (**) Option "_source" "server/udev"

[ 12282.106] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event2 is tagged by udev as: Touchpad

[ 12282.106] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event2 is a touchpad

[ 12282.136] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event2"

[ 12282.136] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)

[ 12282.136] (**) Option "AccelerationScheme" "none"

[ 12282.136] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0

[ 12282.136] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000

[ 12282.136] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4

[ 12282.137] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event2 is tagged by udev as: Touchpad

[ 12282.137] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event2 is a touchpad

[ 12282.138] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)

[ 12282.138] (II) No input driver specified, ignoring this device.

[ 12282.138] (II) This device may have been added with another device file.

[ 12282.138] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)

[ 12282.138] (II) No input driver specified, ignoring this device.

[ 12282.138] (II) This device may have been added with another device file.

[ 12282.164] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)

[ 12290.713] (II) UnloadModule: "libinput"

[ 12290.713] (II) UnloadModule: "libinput"

[ 12290.714] (II) UnloadModule: "libinput"

[ 12290.714] (II) UnloadModule: "libinput"

[ 12290.714] (II) UnloadModule: "libinput"

[ 12290.714] (II) UnloadModule: "libinput"

[ 12290.714] (II) UnloadModule: "libinput"

[ 12290.714] (II) UnloadModule: "libinput"

[ 12290.714] (II) UnloadModule: "libinput"

[ 12290.714] (II) UnloadModule: "libinput"

[ 12290.728] (II) NOUVEAU(G0): NVLeaveVT is called.

[ 12291.489] (II) Server terminated successfully (0). Closing log file.

Edit à toto : J'ai édité ton message pour le rendre plus lisible en séparant la commande seule de son retour. Je te laisse cliquer sur le lien Modifier au bas à droite de ce post pour voir comment le bb-code est utilisé pour ça.
Voir le tuto : Le code, ça pique moins les yeux en couleur

Sillard · 08-03-2019 12:28:54

Y316 a écrit :

Quand cela sera fait tu pourras tenter
dmesg
pour savoir ce qu'il se passe.
Post nous les réponses.

Voilà ce que ça donne :

[    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP D

ebian 4.9.144-3.1 (2019-02-19)

[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/debian--vg-root ro quiet

[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256

[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable

[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c97b9fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c97ba000-0x00000000c9dbafff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000c9dbb000-0x00000000c9dbdfff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9dbe000-0x00000000c9dd4fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9dd5000-0x00000000c9ddafff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9ddb000-0x00000000c9ddcfff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9ddd000-0x00000000c9de6fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9de7000-0x00000000c9f3dfff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9f3e000-0x00000000c9f41fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9f42000-0x00000000c9f8bfff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9f8c000-0x00000000c9fb1fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9fb2000-0x00000000c9fb4fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9fb5000-0x00000000c9fb6fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9fb7000-0x00000000c9fcdfff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9fce000-0x00000000c9fd3fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9fd4000-0x00000000c9fdbfff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9fdc000-0x00000000c9fdcfff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9fdd000-0x00000000c9febfff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9fec000-0x00000000c9fecfff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9fed000-0x00000000c9ff7fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000c9ff8000-0x00000000c9ffcfff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000c9ffd000-0x00000000ca028fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca029000-0x00000000ca029fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ca02a000-0x00000000ca039fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca03a000-0x00000000ca060fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ca061000-0x00000000ca073fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca074000-0x00000000ca074fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ca075000-0x00000000ca075fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca076000-0x00000000ca077fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ca078000-0x00000000ca078fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca079000-0x00000000ca07dfff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ca07e000-0x00000000ca094fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca095000-0x00000000ca639fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ca63a000-0x00000000ca8b9fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000ca8ba000-0x00000000ca8befff] ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000ca8bf000-0x00000000ca8bffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000ca8c0000-0x00000000ca902fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000ca903000-0x00000000cad11fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000cad12000-0x00000000caff3fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000caff4000-0x00000000caffffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f1fffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.7 present.

[    0.000000] DMI: ASUSTeK COMPUTER INC. N76VB/N76VB, BIOS N76VB.202 02/01/2013

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x22f200 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-CFFFF write-protect

[    0.000000]   D0000-E7FFF uncachable

[    0.000000]   E8000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 000000000 mask E00000000 write-back

[    0.000000]   1 base 200000000 mask FE0000000 write-back

[    0.000000]   2 base 220000000 mask FF0000000 write-back

[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable

[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable

[    0.000000]   5 base 0CC000000 mask FFC000000 uncachable

[    0.000000]   6 base 0CBC00000 mask FFFC00000 uncachable

[    0.000000]   7 base 22F800000 mask FFF800000 uncachable

[    0.000000]   8 base 22F400000 mask FFFC00000 uncachable

[    0.000000]   9 base 22F200000 mask FFFE00000 uncachable

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  

[    0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff889fc00fd810]

[    0.000000] Base memory trampoline at [ffff889fc0097000] 97000 size 24576

[    0.000000] BRK [0x8ef34000, 0x8ef34fff] PGTABLE

[    0.000000] BRK [0x8ef35000, 0x8ef35fff] PGTABLE

[    0.000000] BRK [0x8ef36000, 0x8ef36fff] PGTABLE

[    0.000000] BRK [0x8ef37000, 0x8ef37fff] PGTABLE

[    0.000000] BRK [0x8ef38000, 0x8ef38fff] PGTABLE

[    0.000000] BRK [0x8ef39000, 0x8ef39fff] PGTABLE

[    0.000000] BRK [0x8ef3a000, 0x8ef3afff] PGTABLE

[    0.000000] BRK [0x8ef3b000, 0x8ef3bfff] PGTABLE

[    0.000000] BRK [0x8ef3c000, 0x8ef3cfff] PGTABLE

[    0.000000] BRK [0x8ef3d000, 0x8ef3dfff] PGTABLE

[    0.000000] BRK [0x8ef3e000, 0x8ef3efff] PGTABLE

[    0.000000] BRK [0x8ef3f000, 0x8ef3ffff] PGTABLE

[    0.000000] RAMDISK: [mem 0x3583d000-0x36c15fff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)

[    0.000000] ACPI: XSDT 0x00000000CA88C078 00007C (v01 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: FACP 0x00000000CA89FA40 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: DSDT 0x00000000CA88C188 0138B4 (v02 _ASUS_ Notebook 00000013 INTL 20091112)

[    0.000000] ACPI: FACS 0x00000000CA8B7080 000040

[    0.000000] ACPI: APIC 0x00000000CA89FB50 000092 (v03 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: FPDT 0x00000000CA89FBE8 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)

[    0.000000] ACPI: ECDT 0x00000000CA89FC30 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)

[    0.000000] ACPI: MCFG 0x00000000CA89FCF8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)

[    0.000000] ACPI: HPET 0x00000000CA89FD38 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)

[    0.000000] ACPI: SSDT 0x00000000CA89FD70 00066E (v01 AhciR1 AhciTab1 00001000 INTL 20091112)

[    0.000000] ACPI: SSDT 0x00000000CA8A03E0 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)

[    0.000000] ACPI: SSDT 0x00000000CA8A0880 00094C (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)

[    0.000000] ACPI: SSDT 0x00000000CA8A11D0 000B18 (v01 PmRef  CpuPm    00003000 INTL 20051117)

[    0.000000] ACPI: MSDM 0x00000000CA639E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f1fffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x22f1f3000-0x22f1f7fff]

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022f1fffff]

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]

[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]

[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000c97b9fff]

[    0.000000]   node   0: [mem 0x00000000c9dbe000-0x00000000c9dd4fff]

[    0.000000]   node   0: [mem 0x00000000c9ddb000-0x00000000c9ddcfff]

[    0.000000]   node   0: [mem 0x00000000c9de7000-0x00000000c9f3dfff]

[    0.000000]   node   0: [mem 0x00000000c9f42000-0x00000000c9f8bfff]

[    0.000000]   node   0: [mem 0x00000000c9fb2000-0x00000000c9fb4fff]

[    0.000000]   node   0: [mem 0x00000000c9fb7000-0x00000000c9fcdfff]

[    0.000000]   node   0: [mem 0x00000000c9fd4000-0x00000000c9fdbfff]

[    0.000000]   node   0: [mem 0x00000000c9fdd000-0x00000000c9febfff]

[    0.000000]   node   0: [mem 0x00000000c9fed000-0x00000000c9ff7fff]

[    0.000000]   node   0: [mem 0x00000000c9ffd000-0x00000000ca028fff]

[    0.000000]   node   0: [mem 0x00000000ca02a000-0x00000000ca039fff]

[    0.000000]   node   0: [mem 0x00000000ca061000-0x00000000ca073fff]

[    0.000000]   node   0: [mem 0x00000000ca075000-0x00000000ca075fff]

[    0.000000]   node   0: [mem 0x00000000ca078000-0x00000000ca078fff]

[    0.000000]   node   0: [mem 0x00000000ca07e000-0x00000000ca094fff]

[    0.000000]   node   0: [mem 0x00000000ca8bf000-0x00000000ca8bffff]

[    0.000000]   node   0: [mem 0x00000000ca903000-0x00000000cad11fff]

[    0.000000]   node   0: [mem 0x00000000caff4000-0x00000000caffffff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022f1fffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f1fffff]

[    0.000000] On node 0 totalpages: 2067919

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3996 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 12849 pages used for memmap

[    0.000000]   DMA32 zone: 822323 pages, LIFO batch:31

[    0.000000]   Normal zone: 19400 pages used for memmap

[    0.000000]   Normal zone: 1241600 pages, LIFO batch:31

[    0.000000] Reserving Intel graphics memory at 0x00000000cbe00000-0x00000000cfdfffff

[    0.000000] ACPI: PM-Timer IO Port: 0x408

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]

[    0.000000] PM: Registered nosave memory: [mem 0xc97ba000-0xc9dbafff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9dbb000-0xc9dbdfff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9dd5000-0xc9ddafff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9ddd000-0xc9de6fff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9f3e000-0xc9f41fff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9f8c000-0xc9fb1fff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9fb5000-0xc9fb6fff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9fce000-0xc9fd3fff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9fdc000-0xc9fdcfff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9fec000-0xc9fecfff]

[    0.000000] PM: Registered nosave memory: [mem 0xc9ff8000-0xc9ffcfff]

[    0.000000] PM: Registered nosave memory: [mem 0xca029000-0xca029fff]

[    0.000000] PM: Registered nosave memory: [mem 0xca03a000-0xca060fff]

[    0.000000] PM: Registered nosave memory: [mem 0xca074000-0xca074fff]

[    0.000000] PM: Registered nosave memory: [mem 0xca076000-0xca077fff]

[    0.000000] PM: Registered nosave memory: [mem 0xca079000-0xca07dfff]

[    0.000000] PM: Registered nosave memory: [mem 0xca095000-0xca639fff]

[    0.000000] PM: Registered nosave memory: [mem 0xca63a000-0xca8b9fff]

[    0.000000] PM: Registered nosave memory: [mem 0xca8ba000-0xca8befff]

[    0.000000] PM: Registered nosave memory: [mem 0xca8c0000-0xca902fff]

[    0.000000] PM: Registered nosave memory: [mem 0xcad12000-0xcaff3fff]

[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]

[    0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1

[    0.000000] percpu: Embedded 35 pages/cpu @ffff88a1eee00000 s105304 r8192 d29864 u262144

[    0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 

[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2035585

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/debian--vg-root ro quiet

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 8037384K/8271676K available (6268K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 234292K reserved, 

0K cma-reserved)

[    0.000000] Kernel/User page tables isolation: enabled

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  Build-time adjustment of leaf fanout to 64.

[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8

[    0.000000] NR_IRQS:33024 nr_irqs:488 16

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[    0.000000] hpet clockevent registered

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] tsc: Detected 2394.783 MHz processor

[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.56 BogoMIPS (lpj=9579132)

[    0.000031] pid_max: default: 32768 minimum: 301

[    0.000047] ACPI: Core revision 20160831

[    0.014172] ACPI: 5 ACPI AML tables successfully acquired and loaded

[    0.014217] Security Framework initialized

[    0.014218] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.014222] AppArmor: AppArmor disabled by boot time parameter

[    0.014628] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.016630] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.017527] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.017534] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.017792] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[    0.017793] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[    0.017796] mce: CPU supports 9 MCE banks

[    0.017804] CPU0: Thermal monitoring enabled (TM1)

[    0.017815] process: using mwait in idle threads

[    0.017818] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8

[    0.017818] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

[    0.017820] Spectre V2 : Mitigation: Full generic retpoline

[    0.017821] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[    0.017821] Speculative Store Bypass: Vulnerable

[    0.018324] Freeing SMP alternatives memory: 24K

[    0.021688] ftrace: allocating 25295 entries in 99 pages

[    0.045412] smpboot: Max logical packages: 2

[    0.045486] x2apic: IRQ remapping doesn't support X2APIC mode

[    0.045948] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.085636] TSC deadline timer enabled

[    0.085639] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)

[    0.085642] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.

[    0.085666] ... version:                3

[    0.085667] ... bit width:              48

[    0.085668] ... generic registers:      4

[    0.085668] ... value mask:             0000ffffffffffff

[    0.085669] ... max period:             00007fffffffffff

[    0.085669] ... fixed-purpose events:   3

[    0.085670] ... event mask:             000000070000000f

[    0.086305] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.086422] x86: Booting SMP configuration:

[    0.086423] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7

[    0.104052] x86: Booted up 1 node, 8 CPUs

[    0.104054] smpboot: Total of 8 processors activated (38316.52 BogoMIPS)

[    0.110907] devtmpfs: initialized

[    0.110976] x86/mm: Memory block size: 128MB

[    0.113691] PM: Registering ACPI NVS region [mem 0xc97ba000-0xc9dbafff] (6295552 bytes)

[    0.113849] PM: Registering ACPI NVS region [mem 0xca63a000-0xca8b9fff] (2621440 bytes)

[    0.113913] PM: Registering ACPI NVS region [mem 0xca8c0000-0xca902fff] (274432 bytes)

[    0.113976] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.113988] futex hash table entries: 2048 (order: 5, 131072 bytes)

[    0.114043] pinctrl core: initialized pinctrl subsystem

[    0.114157] NET: Registered protocol family 16

[    0.126577] cpuidle: using governor ladder

[    0.142585] cpuidle: using governor menu

[    0.142627] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

[    0.142629] ACPI: bus type PCI registered

[    0.142645] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.142713] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)

[    0.142715] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820

[    0.142722] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.

[    0.142821] PCI: Using configuration type 1 for base access

[    0.142875] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

[    0.162760] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    0.163014] ACPI: Added _OSI(Module Device)

[    0.163015] ACPI: Added _OSI(Processor Device)

[    0.163015] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.163016] ACPI: Added _OSI(Processor Aggregator Device)

[    0.163019] ACPI : EC: EC started

[    0.163019] ACPI : EC: interrupt blocked

[    0.164068] ACPI: \: Used as first EC

[    0.164070] ACPI: \: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.164071] ACPI: \: Used as boot ECDT EC to handle transactions

[    0.164245] ACPI: Executed 1 blocks of module-level executable AML code

[    0.294776] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

[    0.335355] ACPI: Dynamic OEM Table Load:

[    0.335362] ACPI: SSDT 0xFFFF88A1E65B2000 000853 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)

[    0.335838] ACPI: Dynamic OEM Table Load:

[    0.335843] ACPI: SSDT 0xFFFF88A1E522EC00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)

[    0.336214] ACPI: Dynamic OEM Table Load:

[    0.336219] ACPI: SSDT 0xFFFF88A1E527E800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)

[    0.338126] ACPI : EC: EC stopped

[    0.338127] ACPI : EC: EC started

[    0.338127] ACPI : EC: interrupt blocked

[    0.338250] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC

[    0.338252] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.338253] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions

[    0.338254] ACPI: Interpreter enabled

[    0.338281] ACPI: (supports S0 S3 S4 S5)

[    0.338282] ACPI: Using IOAPIC for interrupt routing

[    0.338312] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.473695] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])

[    0.473700] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    1.621116] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]

[    1.621285] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]

[    1.621286] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration

[    1.621799] PCI host bridge to bus 0000:00

[    1.621801] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    1.621803] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    1.621804] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    1.621806] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]

[    1.621807] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]

[    1.621808] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]

[    1.621810] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]

[    1.621811] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]

[    1.621812] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]

[    1.621814] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]

[    1.621816] pci_bus 0000:00: root bus resource [bus 00-3e]

[    1.621823] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000

[    1.621929] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400

[    1.621964] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    1.622018] pci 0000:00:01.0: System wakeup disabled by ACPI

[    1.622062] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000

[    1.622072] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]

[    1.622078] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]

[    1.622083] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]

[    1.622234] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330

[    1.622255] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]

[    1.622330] pci 0000:00:14.0: PME# supported from D3hot D3cold

[    1.622386] pci 0000:00:14.0: System wakeup disabled by ACPI

[    1.622429] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000

[    1.622451] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1a000-0xf7a1a00f 64bit]

[    1.622529] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

[    1.622627] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320

[    1.622646] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a18000-0xf7a183ff]

[    1.622734] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[    1.622789] pci 0000:00:1a.0: System wakeup disabled by ACPI

[    1.622834] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300

[    1.622851] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]

[    1.622928] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    1.622987] pci 0000:00:1b.0: System wakeup disabled by ACPI

[    1.623030] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400

[    1.623112] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    1.623210] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400

[    1.623290] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[    1.623392] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400

[    1.623473] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold

[    1.623532] pci 0000:00:1c.3: System wakeup disabled by ACPI

[    1.623579] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320

[    1.623597] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a17000-0xf7a173ff]

[    1.623686] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[    1.623741] pci 0000:00:1d.0: System wakeup disabled by ACPI

[    1.623783] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100

[    1.623972] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601

[    1.623988] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]

[    1.623996] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]

[    1.624004] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]

[    1.624013] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]

[    1.624021] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]

[    1.624030] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a16000-0xf7a167ff]

[    1.624074] pci 0000:00:1f.2: PME# supported from D3hot

[    1.624163] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500

[    1.624180] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a15000-0xf7a150ff 64bit]

[    1.624202] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]

[    1.624351] pci 0000:01:00.0: [10de:0fdf] type 00 class 0x030200

[    1.624365] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]

[    1.624378] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]

[    1.624390] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]

[    1.624399] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]

[    1.624407] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]

[    1.633045] pci 0000:00:01.0: PCI bridge to [bus 01]

[    1.633050] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]

[    1.633054] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]

[    1.633060] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]

[    1.633139] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    1.633230] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000

[    1.633261] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]

[    1.633327] pci 0000:03:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]

[    1.633414] pci 0000:03:00.0: supports D1 D2

[    1.633415] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    1.633463] pci 0000:03:00.0: System wakeup disabled by ACPI

[    1.645059] pci 0000:00:1c.1: PCI bridge to [bus 03]

[    1.645070] pci 0000:00:1c.1:   bridge window [mem 0xf7900000-0xf79fffff]

[    1.645207] pci 0000:04:00.0: [1969:1091] type 00 class 0x020000

[    1.645239] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff 64bit]

[    1.645254] pci 0000:04:00.0: reg 0x18: [io  0xd000-0xd07f]

[    1.645397] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    1.645441] pci 0000:04:00.0: System wakeup disabled by ACPI

[    1.657190] pci 0000:00:1c.3: PCI bridge to [bus 04]

[    1.657194] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]

[    1.657199] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]

[    1.717685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)

[    1.717740] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)

[    1.717791] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)

[    1.717842] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)

[    1.717893] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.

[    1.717945] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.

[    1.717996] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12)

[    1.718048] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)

[    1.718220] ACPI: Enabled 4 GPEs in block 00 to 3F

[    1.718308] ACPI : EC: interrupt unblocked

[    1.718314] ACPI : EC: event unblocked

[    1.718321] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    1.718323] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events

[    1.718408] vgaarb: setting as boot device: PCI:0000:00:02.0

[    1.718409] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[    1.718412] vgaarb: loaded

[    1.718412] vgaarb: bridge control possible 0000:00:02.0

[    1.718479] PCI: Using ACPI for IRQ routing

[    1.720038] PCI: pci_cache_line_size set to 64 bytes

[    1.720204] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]

[    1.720205] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]

[    1.720206] e820: reserve RAM buffer [mem 0xc97ba000-0xcbffffff]

[    1.720211] e820: reserve RAM buffer [mem 0xc9dd5000-0xcbffffff]

[    1.720217] e820: reserve RAM buffer [mem 0xc9ddd000-0xcbffffff]

[    1.720222] e820: reserve RAM buffer [mem 0xc9f3e000-0xcbffffff]

[    1.720226] e820: reserve RAM buffer [mem 0xc9f8c000-0xcbffffff]

[    1.720231] e820: reserve RAM buffer [mem 0xc9fb5000-0xcbffffff]

[    1.720235] e820: reserve RAM buffer [mem 0xc9fce000-0xcbffffff]

[    1.720239] e820: reserve RAM buffer [mem 0xc9fdc000-0xcbffffff]

[    1.720243] e820: reserve RAM buffer [mem 0xc9fec000-0xcbffffff]

[    1.720247] e820: reserve RAM buffer [mem 0xc9ff8000-0xcbffffff]

[    1.720251] e820: reserve RAM buffer [mem 0xca029000-0xcbffffff]

[    1.720254] e820: reserve RAM buffer [mem 0xca03a000-0xcbffffff]

[    1.720258] e820: reserve RAM buffer [mem 0xca074000-0xcbffffff]

[    1.720261] e820: reserve RAM buffer [mem 0xca076000-0xcbffffff]

[    1.720264] e820: reserve RAM buffer [mem 0xca079000-0xcbffffff]

[    1.720266] e820: reserve RAM buffer [mem 0xca095000-0xcbffffff]

[    1.720268] e820: reserve RAM buffer [mem 0xca8c0000-0xcbffffff]

[    1.720270] e820: reserve RAM buffer [mem 0xcad12000-0xcbffffff]

[    1.720272] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]

[    1.720273] e820: reserve RAM buffer [mem 0x22f200000-0x22fffffff]

[    1.720415] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    1.720420] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[    1.722446] clocksource: Switched to clocksource hpet

[    1.728430] VFS: Disk quotas dquot_6.6.0

[    1.728456] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    1.728541] pnp: PnP ACPI init

[    1.728650] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved

[    1.728653] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    1.786636] system 00:01: [io  0x0680-0x069f] has been reserved

[    1.786638] system 00:01: [io  0x1000-0x100f] has been reserved

[    1.786640] system 00:01: [io  0xffff] has been reserved

[    1.786642] system 00:01: [io  0xffff] has been reserved

[    1.786643] system 00:01: [io  0x0400-0x0453] has been reserved

[    1.786645] system 00:01: [io  0x0458-0x047f] has been reserved

[    1.786646] system 00:01: [io  0x0500-0x057f] has been reserved

[    1.786648] system 00:01: [io  0x164e-0x164f] has been reserved

[    1.786651] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.786681] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)

[    1.786734] system 00:03: [io  0x0454-0x0457] has been reserved

[    1.786737] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    1.786793] system 00:04: [io  0x04d0-0x04d1] has been reserved

[    1.786795] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.786857] pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)

[    1.786897] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)

[    1.787082] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved

[    1.787084] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved

[    1.787086] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved

[    1.787088] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved

[    1.787090] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved

[    1.787092] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved

[    1.787093] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved

[    1.787096] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved

[    1.787098] system 00:07: [mem 0xff000000-0xffffffff] has been reserved

[    1.787100] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved

[    1.787101] system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved

[    1.787104] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.787184] system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved

[    1.787187] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.787341] system 00:09: [mem 0x20000000-0x201fffff] has been reserved

[    1.787343] system 00:09: [mem 0x40004000-0x40004fff] has been reserved

[    1.787345] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)

[    1.787378] pnp: PnP ACPI: found 10 devices

[    1.793760] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    1.793795] pci 0000:00:01.0: PCI bridge to [bus 01]

[    1.793797] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]

[    1.793800] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]

[    1.793802] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]

[    1.793806] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    1.793818] pci 0000:00:1c.1: PCI bridge to [bus 03]

[    1.793823] pci 0000:00:1c.1:   bridge window [mem 0xf7900000-0xf79fffff]

[    1.793831] pci 0000:00:1c.3: PCI bridge to [bus 04]

[    1.793834] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]

[    1.793839] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]

[    1.793849] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    1.793850] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    1.793852] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    1.793853] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]

[    1.793854] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]

[    1.793856] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]

[    1.793857] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]

[    1.793859] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]

[    1.793860] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]

[    1.793861] pci_bus 0000:00: resource 13 [mem 0xcfe00000-0xfeafffff window]

[    1.793863] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]

[    1.793864] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]

[    1.793865] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]

[    1.793867] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]

[    1.793869] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]

[    1.793870] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]

[    1.793992] NET: Registered protocol family 2

[    1.794180] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[    1.794304] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    1.794423] TCP: Hash tables configured (established 65536 bind 65536)

[    1.794451] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[    1.794473] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[    1.794533] NET: Registered protocol family 1

[    1.794547] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    1.846585] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag

[    1.846626] PCI: CLS 64 bytes, default 64

[    1.846670] Unpacking initramfs...

[    2.204843] Freeing initrd memory: 20324K

[    2.204850] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    2.204852] software IO TLB [mem 0xc57ba000-0xc97ba000] (64MB) mapped at [ffff88a0857ba000-ffff88a0897b9fff]

[    2.205284] audit: initializing netlink subsys (disabled)

[    2.205300] audit: type=2000 audit(1552039234.048:1): initialized

[    2.205707] workingset: timestamp_bits=40 max_order=21 bucket_order=0

[    2.205778] zbud: loaded

[    2.206640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[    2.206673] io scheduler noop registered

[    2.206674] io scheduler deadline registered

[    2.206686] io scheduler cfq registered (default)

[    2.207314] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    2.207318] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    2.207333] intel_idle: MWAIT substates: 0x21120

[    2.207333] intel_idle: v0.4.1 model 0x3A

[    2.207630] intel_idle: lapic_timer_reliable_states 0xffffffff

[    2.207828] GHES: HEST is not enabled!

[    2.207880] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    2.208331] Linux agpgart interface v0.103

[    2.208409] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

[    2.208410] AMD IOMMUv2 functionality not available on this system

[    2.209019] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

[    2.210789] i8042: Detected active multiplexing controller, rev 1.1

[    2.211721] serio: i8042 KBD port at 0x60,0x64 irq 1

[    2.211725] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[    2.211756] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[    2.211781] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[    2.211806] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[    2.211920] mousedev: PS/2 mouse device common for all mice

[    2.211961] rtc_cmos 00:02: RTC can wake from S4

[    2.212090] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

[    2.212115] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

[    2.212124] intel_pstate: Intel P-state driver initializing

[    2.212611] ledtrig-cpu: registered to indicate activity on CPUs

[    2.213134] NET: Registered protocol family 10

[    2.213587] mip6: Mobile IPv6

[    2.213590] NET: Registered protocol family 17

[    2.213594] mpls_gso: MPLS GSO support

[    2.214088] microcode: sig=0x306a9, pf=0x10, revision=0x15

[    2.214304] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[    2.214550] registered taskstats version 1

[    2.214580] zswap: loaded using pool lzo/zbud

[    2.214885] ima: No TPM chip found, activating TPM-bypass!

[    2.214888] ima: Allocated hash algorithm: sha256

[    2.215561] rtc_cmos 00:02: setting system clock to 2019-03-08 10:00:35 UTC (1552039235)

[    2.215854] PM: Hibernation image not present or could not be loaded.

[    2.217302] Freeing unused kernel memory: 1424K

[    2.217304] Write protecting the kernel read-only data: 12288k

[    2.218076] Freeing unused kernel memory: 1908K

[    2.222830] Freeing unused kernel memory: 1224K

[    2.233621] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    2.249749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    2.334617] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    2.334769] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    2.334789] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    2.386105] thermal LNXTHERM:00: registered as thermal_zone0

[    2.386108] ACPI: Thermal Zone [THRM] (56 C)

[    2.388054] ACPI: bus type USB registered

[    2.388086] usbcore: registered new interface driver usbfs

[    2.388099] usbcore: registered new interface driver hub

[    2.388130] usbcore: registered new device driver usb

[    2.388795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.389116] ehci-pci: EHCI PCI platform driver

[    2.389238] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[    2.390328] SCSI subsystem initialized

[    2.390836] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [74:d0:2b:1c:dd:e1]

[    2.392297] libata version 3.00 loaded.

[    2.395589] AVX version of gcm_enc/dec engaged.

[    2.395590] AES CTR mode by8 optimization enabled

[    2.411373] alx 0000:04:00.0 enp4s0: renamed from eth0

[    2.447237] ehci-pci 0000:00:1a.0: EHCI Host Controller

[    2.447257] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

[    2.447273] ehci-pci 0000:00:1a.0: debug port 2

[    2.451180] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported

[    2.451197] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a18000

[    2.466427] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[    2.466519] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    2.466521] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.466523] usb usb1: Product: EHCI Host Controller

[    2.466524] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd

[    2.466526] usb usb1: SerialNumber: 0000:00:1a.0

[    2.466800] hub 1-0:1.0: USB hub found

[    2.466808] hub 1-0:1.0: 2 ports detected

[    2.467054] ehci-pci 0000:00:1d.0: EHCI Host Controller

[    2.467059] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

[    2.467072] ehci-pci 0000:00:1d.0: debug port 2

[    2.470984] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported

[    2.470995] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a17000

[    2.486450] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[    2.486497] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[    2.486499] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.486500] usb usb2: Product: EHCI Host Controller

[    2.486501] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd

[    2.486503] usb usb2: SerialNumber: 0000:00:1d.0

[    2.486755] hub 2-0:1.0: USB hub found

[    2.486762] hub 2-0:1.0: 2 ports detected

[    2.487112] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    2.487123] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

[    2.488250] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930

[    2.488259] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[    2.488421] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

[    2.488424] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.488427] usb usb3: Product: xHCI Host Controller

[    2.488430] usb usb3: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd

[    2.488432] usb usb3: SerialNumber: 0000:00:14.0

[    2.488783] hub 3-0:1.0: USB hub found

[    2.488799] hub 3-0:1.0: 4 ports detected

[    2.489003] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    2.489009] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

[    2.489068] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003

[    2.489071] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.489073] usb usb4: Product: xHCI Host Controller

[    2.489076] usb usb4: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd

[    2.489093] usb usb4: SerialNumber: 0000:00:14.0

[    2.489431] hub 4-0:1.0: USB hub found

[    2.489448] hub 4-0:1.0: 4 ports detected

[    2.489728] ahci 0000:00:1f.2: version 3.0

[    2.489959] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode

[    2.489963] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 

[    2.499261] scsi host0: ahci

[    2.499597] scsi host1: ahci

[    2.499919] scsi host2: ahci

[    2.500201] scsi host3: ahci

[    2.500466] scsi host4: ahci

[    2.500659] scsi host5: ahci

[    2.500726] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 26

[    2.500727] ata2: DUMMY

[    2.500730] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 26

[    2.500731] ata4: DUMMY

[    2.500731] ata5: DUMMY

[    2.500732] ata6: DUMMY

[    2.794424] usb 1-1: new high-speed USB device number 2 using ehci-pci

[    2.813279] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    2.813323] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.814380] usb 3-1: new full-speed USB device number 2 using xhci_hcd

[    2.814388] usb 2-1: new high-speed USB device number 2 using ehci-pci

[    2.814603] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

[    2.814802] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded

[    2.814806] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

[    2.816017] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133

[    2.816020] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    2.817384] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

[    2.817576] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded

[    2.817581] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

[    2.818190] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded

[    2.818195] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

[    2.818736] ata3.00: ATAPI: TSSTcorp DVDWBD SN-406AB, AS01, max UDMA/100

[    2.818801] ata1.00: configured for UDMA/133

[    2.819295] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A560 PQ: 0 ANSI: 5

[    2.825362] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded

[    2.825367] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

[    2.825906] ata3.00: configured for UDMA/100

[    2.868641] scsi 2:0:0:0: CD-ROM            TSSTcorp DVDWBD SN-406AB  AS01 PQ: 0 ANSI: 5

[    2.884639] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[    2.884643] sd 0:0:0:0: [sda] 4096-byte physical blocks

[    2.884727] sd 0:0:0:0: [sda] Write Protect is off

[    2.884730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.884763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.895185] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[    2.895187] cdrom: Uniform CD-ROM driver Revision: 3.20

[    2.895491] sr 2:0:0:0: Attached scsi CD-ROM sr0

[    2.943169] usb 1-1: New USB device found, idVendor=8087, idProduct=0024

[    2.943173] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.943724] hub 1-1:1.0: USB hub found

[    2.943838] hub 1-1:1.0: 6 ports detected

[    2.955449] usb 3-1: New USB device found, idVendor=058f, idProduct=9254

[    2.955467] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.955469] usb 3-1: Product: Generic USB Hub

[    2.955471] usb 3-1: Manufacturer: ALCOR

[    2.955932] hub 3-1:1.0: USB hub found

[    2.956009] hub 3-1:1.0: 4 ports detected

[    2.962897] usb 2-1: New USB device found, idVendor=8087, idProduct=0024

[    2.962900] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.963300] hub 2-1:1.0: USB hub found

[    2.963456] hub 2-1:1.0: 6 ports detected

[    3.074674] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd

[    3.100146] usb 4-4: New USB device found, idVendor=1b1c, idProduct=1a03

[    3.100150] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    3.100153] usb 4-4: Product: Voyager 3.0

[    3.100156] usb 4-4: Manufacturer: Corsair

[    3.100158] usb 4-4: SerialNumber: AA4I0E9AI5NPS3UI

[    3.106102] usb-storage 4-4:1.0: USB Mass Storage device detected

[    3.106349] scsi host6: usb-storage 4-4:1.0

[    3.106480] usbcore: registered new interface driver usb-storage

[    3.107154] usbcore: registered new interface driver uas

[    3.163125]  sda: sda1 sda2 < sda5 >

[    3.163833] sd 0:0:0:0: [sda] Attached SCSI disk

[    3.230354] tsc: Refined TSC clocksource calibration: 2394.560 MHz

[    3.230365] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns

[    3.234381] usb 1-1.1: new full-speed USB device number 3 using ehci-pci

[    3.242383] usb 3-1.1: new low-speed USB device number 3 using xhci_hcd

[    3.306885] random: fast init done

[    3.323613] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)

[    3.337636] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0d.

[    3.344471] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362

[    3.344475] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    3.344477] usb 1-1.1: Product: Bluetooth USB Host Controller

[    3.344480] usb 1-1.1: Manufacturer: Atheros Communications

[    3.344482] usb 1-1.1: SerialNumber: Alaska Day 2006

[    3.347235] usb 3-1.1: New USB device found, idVendor=1bcf, idProduct=0005

[    3.347239] usb 3-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[    3.347242] usb 3-1.1: Product: USB Optical Mouse

[    3.351658] psmouse serio4: elantech: Elan sample query result 07, 15, 64

[    3.352609] hidraw: raw HID events driver (C) Jiri Kosina

[    3.356051] usbcore: registered new interface driver usbhid

[    3.356053] usbhid: USB HID core driver

[    3.357055] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:1BCF:0005.0001/input/input9

[    3.357180] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1.1/input0

[    3.419781] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8

[    3.422344] usb 1-1.3: new high-speed USB device number 4 using ehci-pci

[    3.637550] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2883

[    3.637554] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    3.637557] usb 1-1.3: Product: ASUS USB2.0 Webcam

[    3.637559] usb 1-1.3: Manufacturer: 04G626000611BQ3420003NG

[    3.762241] device-mapper: uevent: version 1.0.3

[    3.762412] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com

[    4.254607] clocksource: Switched to clocksource tsc

[    4.338863] scsi 6:0:0:0: Direct-Access     Corsair  Voyager 3.0      1100 PQ: 0 ANSI: 6

[    4.340195] sd 6:0:0:0: [sdb] 250068992 512-byte logical blocks: (128 GB/119 GiB)

[    4.340774] sd 6:0:0:0: [sdb] Write Protect is off

[    4.340780] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00

[    4.341334] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    4.346723]  sdb: sdb1

[    4.349403] sd 6:0:0:0: [sdb] Attached SCSI removable disk

[    6.750454] random: crng init done

[    6.750456] random: 7 urandom warning(s) missed due to ratelimiting

[   13.091201] NET: Registered protocol family 38

[   15.067531] PM: Starting manual resume from disk

[   15.067536] PM: Hibernation image partition 254:2 present

[   15.067538] PM: Looking for hibernation image.

[   15.067684] PM: Image not found (code -22)

[   15.067686] PM: Hibernation image not present or could not be loaded.

[   15.592565] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)

[   16.986015] ip_tables: (C) 2000-2006 Netfilter Core Team

[   17.161617] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +

GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)

[   17.162113] systemd[1]: Detected architecture x86-64.

[   17.186958] systemd[1]: Set hostname to <debian>.

[   18.539172] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[   18.539284] systemd[1]: Listening on LVM2 metadata daemon socket.

[   18.539334] systemd[1]: Listening on fsck to fsckd communication Socket.

[   18.539360] systemd[1]: Reached target Remote File Systems.

[   18.539432] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[   18.539502] systemd[1]: Listening on Device-mapper event daemon FIFOs.

[   18.539574] systemd[1]: Listening on Syslog Socket.

[   18.951491] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro

[   19.225401] systemd-journald[346]: Received request to flush runtime journal from PID 1

[   20.164405] lp: driver loaded but no devices found

[   20.390656] ppdev: user-space parallel port driver

[   22.518836] wmi: Mapper loaded

[   22.642171] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input10

[   22.741185] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11

[   22.824784] ACPI: Lid Switch [LID]

[   22.824849] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12

[   22.824853] ACPI: Sleep Button [SLPB]

[   22.824923] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13

[   22.824925] ACPI: Power Button [PWRF]

[   22.877131] ACPI: Battery Slot [BAT0] (battery present)

[   22.877235] ACPI: AC Adapter [AC0] (on-line)

[   22.996770] input: PC Speaker as /devices/platform/pcspkr/input/input14

[   23.193997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   23.319263] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer

[   23.319265] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

[   23.319267] RAPL PMU: hw unit of domain package 2^-16 Joules

[   23.319268] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules

[   23.380455] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000

044F (\GPIS) (20160831/utaddress-247)

[   23.380461] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000

047F (\PMIO) (20160831/utaddress-247)

[   23.380467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   23.380470] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000

057F (\GPIO) (20160831/utaddress-247)

[   23.380474] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000

0563 (\GP01) (20160831/utaddress-247)

[   23.380477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   23.380478] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000

057F (\GPIO) (20160831/utaddress-247)

[   23.380482] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000

0563 (\GP01) (20160831/utaddress-247)

[   23.380486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   23.380486] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000

057F (\GPIO) (20160831/utaddress-247)

[   23.380490] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000

0563 (\GP01) (20160831/utaddress-247)

[   23.380494] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   23.380495] lpc_ich: Resource conflict(s) found affecting gpio_ich

[   23.550729] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   23.550759] sr 2:0:0:0: Attached scsi generic sg1 type 5

[   23.550786] sd 6:0:0:0: Attached scsi generic sg2 type 0

[   24.434770] [drm] Initialized

[   24.444536] Bluetooth: Core ver 2.22

[   24.444551] NET: Registered protocol family 31

[   24.444552] Bluetooth: HCI device and connection manager initialized

[   24.444555] Bluetooth: HCI socket layer initialized

[   24.444558] Bluetooth: L2CAP socket layer initialized

[   24.444568] Bluetooth: SCO socket layer initialized

[   24.753979] asus_wmi: ASUS WMI generic driver loaded

[   24.773392] asus_wmi: Initialization: 0x1

[   24.773447] asus_wmi: BIOS WMI version: 7.9

[   24.773515] asus_wmi: SFUN value: 0x6a0877

[   24.775277] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input15

[   24.805439] asus_wmi: Number of fans: 1

[   25.163030] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC663: line_outs=2 (0x14/0x16/0x0/0x0/0x0) type:speaker

[   25.163034] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[   25.163037] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)

[   25.163039] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[   25.163042] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0

[   25.163043] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[   25.163046] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19

[   25.163049] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18

[   25.563986] intel_rapl: Found RAPL domain package

[   25.563991] intel_rapl: Found RAPL domain core

[   25.563994] intel_rapl: Found RAPL domain uncore

[   25.564008] intel_rapl: RAPL package 0 domain package locked by BIOS

[   25.623310] usbcore: registered new interface driver btusb

[   25.640666] ath: phy0: Disable PLL PowerSave

[   25.648409] ath: phy0: ASPM enabled: 0x42

[   25.648410] ath: EEPROM regdomain: 0x60

[   25.648411] ath: EEPROM indicates we should expect a direct regpair map

[   25.648413] ath: Country alpha2 being used: 00

[   25.648413] ath: Regpair used: 0x60

[   25.705930] usb 1-1.1: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2)

[   25.705992] usb 1-1.1: Direct firmware load for ar3k/AthrBT_0x01020200.dfu failed with error -2

[   25.705995] Bluetooth: Loading patch file failed

[   25.706053] ath3k: probe of 1-1.1:1.0 failed with error -2

[   25.706083] usbcore: registered new interface driver ath3k

[   25.944556] iTCO_vendor_support: vendor-support=0

[   26.022466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[   26.022514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)

[   26.022648] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[   26.423967] [drm] Memory usable by graphics device = 2048M

[   26.423970] [drm] Replacing VGA console driver

[   26.424805] Console: switching to colour dummy device 80x25

[   26.431639] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[   26.431640] [drm] Driver supports precise vblank timestamp query.

[   26.434267] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[   26.464594] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)

[   26.465447] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input19

[   26.466599] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[   26.471791] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20

[   26.472021] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[   26.472028] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0

[   26.487973] fbcon: inteldrmfb (fb0) is primary device

[   26.589726] Console: switching to colour frame buffer device 160x56

[   26.610309] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[   26.626035] MXM: GUID detected in BIOS

[   26.626097] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20160831/exoparg2-427)

[   26.626108] ACPI Error: Method parse/execution failed [\_SB.PCI0.GFX0._DSM] (Node ffff88a1e65c19b0), AE_AML_PACKAGE_LIMIT (20160831/pspa

rse-543)

[   26.626117] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM (0x300b)

[   26.626127] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments

-95)

[   26.626254] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments

-95)

[   26.626391] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, 

[   26.626445] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20160831/exoparg2-427)

[   26.626454] ACPI Error: Method parse/execution failed [\_SB.PCI0.GFX0._DSM] (Node ffff88a1e65c19b0), AE_AML_PACKAGE_LIMIT (20160831/pspa

rse-543)

[   26.626463] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP._DSM] (Node ffff88a1e65db370), AE_AML_PACKAGE_LIMIT (20160831

/psparse-543)

[   26.626470] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM (0x300b)

[   26.626478] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[   26.626607] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[   26.626704] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 

[   26.626708] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle

[   26.626980] nouveau 0000:01:00.0: NVIDIA GK107 (0e71f0a2)

[   26.636026] nouveau 0000:01:00.0: bios: version 80.07.95.00.08

[   26.719640] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16

[   26.719717] nouveau 0000:01:00.0: fb: 4096 MiB DDR3

[   26.719843] nouveau 0000:01:00.0: bus: MMIO write of ffffff1f FAULT at 6013d4 [ IBUS ]

[   26.719982] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17

[   26.720044] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18

[   26.720104] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21

[   26.786567] vga_switcheroo: enabled

[   26.786692] [TTM] Zone  kernel: Available graphics memory: 4031144 kiB

[   26.786693] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB

[   26.786693] [TTM] Initializing pool allocator

[   26.786697] [TTM] Initializing DMA pool allocator

[   26.786715] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB

[   26.786716] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB

[   26.786719] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid

[   26.786747] nouveau 0000:01:00.0: DRM: DCB version 4.0

[   26.786748] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid

[   26.919610] media: Linux media interface: v0.10

[   26.944069] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies

[   26.944075] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1

[   27.117761] Linux video capture interface: v2.00

[   27.563931] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)

[   27.581049] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!

[   27.581055] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!

[   27.581059] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!

[   27.581233] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22

[   27.581367] usbcore: registered new interface driver uvcvideo

[   27.581368] USB Video Class driver (1.1.1)

[   28.790507] Adding 8273916k swap on /dev/mapper/debian--vg-swap_1.  Priority:-1 extents:1 across:8273916k FS

[   29.122457] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[   29.122888] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffaaa282100000, irq=17

[   29.199730] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0

[   30.265142] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem

[   30.321333] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)

[   32.091728] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[   32.091979] nouveau 0000:01:00.0: DRM: evicting buffers...

[   32.091983] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...

[   32.092013] nouveau 0000:01:00.0: DRM: suspending client object trees...

[   32.097689] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

[   38.949920] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready

[   38.950809] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready

[   38.951688] alx 0000:04:00.0 enp4s0: NIC Up: 1 Gbps Full

[   38.951920] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready

[   38.958307] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   38.973166] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   38.998319] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   40.109413] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   41.222158] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

[   41.285473] wlp3s0: authenticate with 80:ea:96:f0:33:48

[   41.300234] wlp3s0: send auth to 80:ea:96:f0:33:48 (try 1/3)

[   41.302315] wlp3s0: authenticated

[   41.302783] wlp3s0: associate with 80:ea:96:f0:33:48 (try 1/3)

[   41.306911] wlp3s0: RX AssocResp from 80:ea:96:f0:33:48 (capab=0x1411 status=0 aid=2)

[   41.307066] wlp3s0: associated

[   41.311595] ath: EEPROM regdomain: 0x8028

[   41.311596] ath: EEPROM indicates we should expect a country code

[   41.311597] ath: doing EEPROM country->regdmn map search

[   41.311597] ath: country maps to regdmn code: 0x37

[   41.311598] ath: Country alpha2 being used: AT

[   41.311599] ath: Regpair used: 0x37

[   41.311600] ath: regdomain 0x8028 dynamically updated by country IE

[   41.759418] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 80:ea:96:f0:33:48

[   41.759747] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready

[   48.118338] nouveau 0000:01:00.0: DRM: resuming kernel object tree...

[   48.236678] nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]

[   48.257257] nouveau 0000:01:00.0: DRM: resuming client object trees...

[   55.129576] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[   55.129870] nouveau 0000:01:00.0: DRM: evicting buffers...

[   55.129875] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...

[   55.129908] nouveau 0000:01:00.0: DRM: suspending client object trees...

[   55.135552] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

[   57.040173] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   57.040176] Bluetooth: BNEP filters: protocol multicast

[   57.040181] Bluetooth: BNEP socket layer initialized

[   62.491704] alx 0000:04:00.0 enp4s0: Link Down

[   67.620402] nouveau 0000:01:00.0: DRM: resuming kernel object tree...

[   67.722091] nouveau 0000:01:00.0: bus: MMIO write of 6722081f FAULT at 6013d4 [ IBUS ]

[   67.742642] nouveau 0000:01:00.0: DRM: resuming client object trees...

[   73.047930] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[   73.048200] nouveau 0000:01:00.0: DRM: evicting buffers...

[   73.048205] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...

[   73.048238] nouveau 0000:01:00.0: DRM: suspending client object trees...

[   73.054191] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

[   82.259132] nouveau 0000:01:00.0: DRM: resuming kernel object tree...

[   82.375992] nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]

[   82.396618] nouveau 0000:01:00.0: DRM: resuming client object trees...

[   86.538518] fuse init (API version 7.26)

[   86.997252] alx 0000:04:00.0 enp4s0: NIC Up: 100 Mbps Full

[   91.990097] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[   91.990337] nouveau 0000:01:00.0: DRM: evicting buffers...

[   92.001271] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...

[   92.001298] nouveau 0000:01:00.0: DRM: suspending client object trees...

[   92.007443] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

[   96.489411] nouveau 0000:01:00.0: DRM: resuming kernel object tree...

[   96.613067] nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]

[   96.753685] nouveau 0000:01:00.0: DRM: resuming client object trees...

[  101.971764] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[  101.972008] nouveau 0000:01:00.0: DRM: evicting buffers...

[  101.972012] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...

[  101.972059] nouveau 0000:01:00.0: DRM: suspending client object trees...

[  101.977963] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

[  147.516950] nouveau 0000:01:00.0: DRM: resuming kernel object tree...

[  147.626342] nouveau 0000:01:00.0: bus: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]

[  147.765221] nouveau 0000:01:00.0: DRM: resuming client object trees...

[  153.164344] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[  153.164524] nouveau 0000:01:00.0: DRM: evicting buffers...

[  153.164526] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...

[  153.164567] nouveau 0000:01:00.0: DRM: suspending client object trees...

[  153.170273] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

[  311.707497] nouveau 0000:01:00.0: DRM: resuming kernel object tree...

[  311.817023] nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]

[  311.955698] nouveau 0000:01:00.0: DRM: resuming client object trees...

[  316.990830] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[  316.991088] nouveau 0000:01:00.0: DRM: evicting buffers...

[  316.991092] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...

[  316.991137] nouveau 0000:01:00.0: DRM: suspending client object trees...

[  316.996965] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

[  320.398491] nouveau 0000:01:00.0: DRM: resuming kernel object tree...

[  320.526629] nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]

[  320.666832] nouveau 0000:01:00.0: DRM: resuming client object trees...

[  325.949745] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsargu

ments-95)

[  325.949987] nouveau 0000:01:00.0: DRM: evicting buffers...

[  325.949992] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...

[  325.950037] nouveau 0000:01:00.0: DRM: suspending client object trees...

[  325.955901] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

root@debian:/#

anonyme · 08-03-2019 12:32:42

tes deux gpu sont bien détecté intel + nvidia

[ 12280.745] (II) modeset(0): [DRI2] Setup complete

[ 12280.745] (II) modeset(0): [DRI2]   DRI driver: i965

[ 12280.745] (II) modeset(0): [DRI2]   VDPAU driver: i965

[ 12280.593] (II) NOUVEAU(G0): [DRI2] Setup complete

[ 12280.593] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau

[ 12280.593] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau

pour utiliser le gpu nvidia il te faut bumblebee
avec la commande "optirun" pour utiliser la carte nvidia a la place de la carte intel

tu a regardé si ce dossier contient quelque chose ? => /etc/X11/xorg.conf.d/ et /usr/share/X11/xorg.conf.d/

[ 12278.903] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

 

pour moi par exemple /usr/share/X11/xorg.conf.d/ contient ceci (sous gnome )

/usr/share/X11/xorg.conf.d# ls

10-amdgpu.conf  10-evdev.conf  10-quirks.conf  40-libinput.conf  70-wacom.conf

ce log date de hier a 17h , tu a laissé la machine allumé ? (normalement il est généré a chaque démarrage )

[ 12278.879] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar  7 17:13:39 2019

 

tes deux gpu

[ 12279.069] (II) xfree86: Adding drm device (/dev/dri/card1)

[ 12279.069] (II) xfree86: Adding drm device (/dev/dri/card0)

[ 12279.073] (--) PCI:*(0:0:2:0) 8086:0166:1043:1477 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072

[ 12279.073] (--) PCI: (0:1:0:0) 10de:0fdf:1043:1477 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288

[ 12279.073] (II) LoadModule: "glx"

les sorties vidéo

[ 12280.100] (II) modeset(0): Output LVDS-1 connected

[ 12280.100] (II) modeset(0): Output VGA-1 disconnected

[ 12280.100] (II) modeset(0): Output HDMI-1 disconnected

[ 12280.100] (II) modeset(0): Output DP-1 disconnected

[ 12280.100] (II) modeset(0): Using exact sizes for initial modes

[ 12280.100] (II) modeset(0): Output LVDS-1 using initial mode 1600x900 +0+0

je ne vois qu'un écran (celui du portable ) => LVDS-1
ton deuxième écran est branché sur quelle sortie ? (vga-1 , hdmi-1 ou dp-1) et physiquement les 3 existent ?

pour tester (avec un écran) configuration ci dessus
pour intel

glxinfo -B

 

pour nvidia

optirun glxinfo -B

 

je ne vois rien d' anormal , pour l'instant je comprend pas trop ce blocage au démarrage de la machine et cette histoire un ou deux écrans.
si tu n'a pas de configuration statique le système va auto configuré ton affichage a chaque démarrage
le cpu prioritaire (principal) est le gpu intel , avec un ou deux écran
pour bumblebee en multi-écran je ne connais pas
si tu est en bureau étendu , c'est l'écran principal qui est utilisé (celui du portable) pour afficher (tu peu glisser/déposer une application sur l'écran2 par exemple)
tes deux écrans ont une définition identique ? => 1600x900

sinon je vois pas quel est le souci :rolleyes:

Dernière modification par anonyme (08-03-2019 13:14:11)

Y316 · 08-03-2019 13:06:21

Sillard a écrit :

Distrib. : Debian 6.3.0-18+deb9u1

Ta distribution est "Squeeze".
https://fr.wikipedia.org/wiki/Historiqu … _(Squeeze)
Y-a-t'il une raison particulière pour ne pas upgrader ton système ?

smolski · 08-03-2019 13:14:37

Y316 a écrit :

Y-a-t'il une raison particulière pour ne pas upgrader ton système ?

Voir le tuto :
https://debian-facile.org/doc:systeme:a … hes-debian

Debian-facile

#1 07-03-2019 12:49:02

[Résolu] Demarrage bloqué

#2 07-03-2019 14:30:40

Re : [Résolu] Demarrage bloqué

#3 07-03-2019 16:00:25

Re : [Résolu] Demarrage bloqué

#4 07-03-2019 16:20:59

Re : [Résolu] Demarrage bloqué

#5 07-03-2019 18:22:26

Re : [Résolu] Demarrage bloqué

#6 08-03-2019 08:22:58

Re : [Résolu] Demarrage bloqué

#7 08-03-2019 08:27:48

Re : [Résolu] Demarrage bloqué

#8 08-03-2019 08:34:57

Re : [Résolu] Demarrage bloqué

#9 08-03-2019 08:39:29

Re : [Résolu] Demarrage bloqué

#10 08-03-2019 09:02:51

Re : [Résolu] Demarrage bloqué

#11 08-03-2019 09:32:42

Re : [Résolu] Demarrage bloqué

#12 08-03-2019 10:50:52

Re : [Résolu] Demarrage bloqué

#13 08-03-2019 10:59:49

Re : [Résolu] Demarrage bloqué

#14 08-03-2019 11:04:49

Re : [Résolu] Demarrage bloqué

#15 08-03-2019 11:07:32

Re : [Résolu] Demarrage bloqué

#16 08-03-2019 11:10:18

Re : [Résolu] Demarrage bloqué

#17 08-03-2019 11:30:17

Re : [Résolu] Demarrage bloqué

#18 08-03-2019 11:41:28

Re : [Résolu] Demarrage bloqué

#19 08-03-2019 12:05:47

Re : [Résolu] Demarrage bloqué

#20 08-03-2019 12:10:43

Re : [Résolu] Demarrage bloqué

#21 08-03-2019 12:15:53

Re : [Résolu] Demarrage bloqué

#22 08-03-2019 12:28:54

Re : [Résolu] Demarrage bloqué

#23 08-03-2019 12:32:42

Re : [Résolu] Demarrage bloqué

#24 08-03-2019 13:06:21

Re : [Résolu] Demarrage bloqué

#25 08-03-2019 13:14:37

Re : [Résolu] Demarrage bloqué

Pied de page des forums