logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#76 02-10-2019 21:20:07

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

Oui, effectivement, c'est bizarre. hmm

Trouvé sur un autre site :

lscpu




Architecture:          x86_64
Mode(s) opératoire(s) des processeurs :32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) par cœur : 1
Cœur(s) par socket : 4
Socket(s):             1
Nœud(s) NUMA :       1
Identifiant constructeur :GenuineIntel
Famille de processeur :6
Modèle :             76
Model name:            Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz
Révision :           3
Vitesse du processeur en MHz :479.937
CPU max MHz:           2080,0000
CPU min MHz:           480,0000
BogoMIPS:              3199.83
Virtualisation :      VT-x
Cache L1d :           24K
Cache L1i :           32K
Cache L2 :            1024K
NUMA node0 CPU(s):     0-3
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch epb tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
 

#77 02-10-2019 23:19:24

guyzmo
Membre
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-11-rt-amd64
(G)UI : Mate desktop
Inscription : 27-09-2019

Re : [RESOLU] vlc ne lis pas les video .mov

Pour vous répondre le pc a bien 4 coeurs ,
en regardant les paquets xserver-xorg installé je me demande si il est bon de les avoirs installés, je vous écrits les paquets installé (même ceux que je trouve OK)

xserver-xorg
xserver-xorg-core
x-server-xorg-input-all
xserver-xorg-input-libinput
xserver-xorg-input-synaptics
xserver-xorg-input-wacom
xserver-xorg-legacy
xserver-xorg-video-all
xserver-xorg-video-amdgpu
xserver-xorg-video-ati(?)
xserver-xorg-video-fbdev
xserver-xorg-video-intel
xserver-xorg-video-nouveau
xserver-xorg-video-qxl
xserver-xorg-video-radeon(?)
xserver-xorg-video-vesa
xserver-xorg-video-vmware



est-il necessaire que j'installe xserver-xorg-dev (car lui n'est pas installé)

@Debian Alain

c'est un ami qui m'as installé ma debian stretch du coup je ne sais pas si les dépots sont okay  je te retourne la liste des depots présents




# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

# deb http://ftp.fr.debian.org/debian/ stretch main non-free contrib
# deb-src http://ftp.fr.debian.org/debian/ stretch main non-free contrib

# deb http://security.debian.org/debian-security/ stretch/updates main contrib non-free  
# deb-src http://security.debian.org/debian-security/ stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
# deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free
# deb-src http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free

# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

deb http://debian.proxad.net/debian/ stretch main non-free contrib
deb-src http://debian.proxad.net/debian/ stretch main non-free contrib

deb http://security.debian.org/debian-security/ stretch/updates main contrib non-free
deb-src http://security.debian.org/debian-security/ stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
deb http://debian.proxad.net/debian/ stretch-updates main contrib non-free
deb-src http://debian.proxad.net/debian/ stretch-updates main contrib non-free
 



Merci de m'eclaircir Si mes dépots sont okay..

J'ai fait la manipe


apt install --reinstall xserver-xorg-video-modesetting


Qui s'est re installé avec succès.

Puis

lspci -nnk | grep -iE "vga|3d|display" -A 3


00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21)
  Subsystem: Acer Incorporated [ALI] Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [1025:1013]
  Kernel modules: i915
00:13.0 SATA controller [0106]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [8086:22a3] (rev 21)
 



J'attend vos réponse avant d'envoyer un Mp @anonyme (que j'ai vu présent sur des poste en lien avec les carte graphique).

THANKS

Dernière modification par guyzmo (02-10-2019 23:31:13)

Hors ligne

#78 03-10-2019 04:38:34

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

Bonjour,

Comme tu es sous Mate-Desktop comme moi, post moi ton screenshot de ça :

Dans Outils système --> Moniteur système Mate

Mate_Syst_Monit.png

#79 03-10-2019 08:20:54

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [RESOLU] vlc ne lis pas les video .mov

pour les dépôts , je crains qu'ils ne soient à refaire .

essaies ceci :

passage en root :

su -


+ M.D.P. root



sauvegarde des dépôts  actuels :

mv /etc/apt/sources.list /etc/apt/sources.list.bak



création des nouveaux dépôts :

cat > /etc/apt/sources.list <<EOF
# Debian Stretch, dépôt principal + paquets non libres
deb http://deb.debian.org/debian/ stretch main contrib non-free
# Debian Stretch, mises à jour de sécurité + paquets non libres
deb http://security.debian.org/ stretch/updates main contrib non-free
# Debian Stretch, mises à jour "volatiles" + paquets non libres
deb http://deb.debian.org/debian/ stretch-updates main contrib non-free
# Debian Stretch, dépôt de rétroportages ("backports")
deb http://deb.debian.org/debian/ stretch-backports main contrib non-free
EOF

 


copie colle tout le bloc du tout premier "cat" au tout dernier "EOF"


mise à jour des dépôts :

apt update


mise à jour des paquets :

apt upgrade



par  contre , pour xserver-xorg-etc... , tu n'a pas lu les liens que j'ai mis . ou tu n'as pas compris .

apt install --reinstall -t stretch-backports xserver-xorg-video-modesetting


apt remove xserver-xorg-video-intel


et teste voir ...



liens :

sources stretch

intel HD graphics

https://wiki.debian.org/fr/GraphicsCard#Intel

Hors ligne

#80 03-10-2019 09:09:07

anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

Bonjour
@Debian Alain

=> https://tracker.debian.org/pkg/xserver- … odesetting

=> https://packages.debian.org/stretch/xse … odesetting

depuis stretch , c'est un paquet virtuel (version du serveur X et noyau , voir "modesetting" )
donc rien a installer , ta commande va renvoyer une erreur .

#81 03-10-2019 09:34:57

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [RESOLU] vlc ne lis pas les video .mov

merci anonyme .

comme il se peut que le paquet xserver-xorg-video-modesetting n'existe plus ,

je te propose de télécharger le codec quicktime (vidéos mov) ici :

apt install quicktime-x11utils


cela t'installera les codecs quick time . çà devrai aller mieux



liens :

https://packages.debian.org/stretch/quicktime-x11utils

en espérant que ton serveur graphique ne soit pas cassé .

Dernière modification par Debian Alain (03-10-2019 09:41:26)

Hors ligne

#82 03-10-2019 12:19:55

guyzmo
Membre
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-11-rt-amd64
(G)UI : Mate desktop
Inscription : 27-09-2019

Re : [RESOLU] vlc ne lis pas les video .mov

@Anonyme

voila le screenshot, désolé je ne suis pas arrivé a faire apparaitre l'image comme toi .. donc oui je voie qu'1coeur présent sur le monitor.

https://framapic.org/gallery#H8H5iTnofk … T1yiJe.png

@Debian Alain ,  je vais m'occuper de changer le sources list , et je regarde les lien que tu m'as transmit , c'ets vrai que certain lien (surtout lorsqu'il sont en anglais ) me perde un peu . Mais je fait mon maximum pour comprendre et suivre sans fautes les conseils donnée ou lus.


par  contre , pour xserver-xorg-etc... , tu n'a pas lu les liens que j'ai mis . ou tu n'as pas compris .

apt install --reinstall -t stretch-backports xserver-xorg-video-modesetting


apt remove xserver-xorg-video-intel


et teste voir ...



Dois-je suivre cette procedure (post#79) ou j'evite et je passe directement a la procedure du post #81 ?!

Hors ligne

#83 03-10-2019 12:27:17

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Hors ligne

#84 03-10-2019 12:27:30

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

guyzmo a écrit :

@Anonyme

voila le screenshot, désolé je ne suis pas arrivé a faire apparaitre l'image comme toi .. donc oui je voie qu'1coeur présent sur le monitor.

https://framapic.org/gallery#H8H5iTnofk … T1yiJe.png



fwPFSuT1yiJe.png

Donc, je ne veux pas dire de bétise, mais pour moi il y a un truc qui cloche.
Je ne suis pas un connaisseur, mais dans le bios, il n'y aurait pas un truc qui modifie "active/désactive" des coeurs ?
Retrouves vite tes 4 CPU, car la suite risque d'être problématique

Dernière modification par Anonyme (03-10-2019 12:35:58)

#85 03-10-2019 12:40:15

guyzmo
Membre
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-11-rt-amd64
(G)UI : Mate desktop
Inscription : 27-09-2019

Re : [RESOLU] vlc ne lis pas les video .mov

Debian Alain a écrit :

Les deux mon colonel.



Fait à la lettre ! le test fait avec mpv donne ce retour (toujours la meme chose )

user@debian:~$

mpv --hwdec=auto '/home/user/Documents/photo samsung/VID_20190818_170428.mp4'
Playing: /home/user/Documents/photo samsung/VID_20190818_170428.mp4



 (+) Video --vid=1 (*) (h264)
 (+) Audio --aid=1 --alang=eng (*) (aac)
libEGL warning: DRI2: failed to authenticate
[vo/opengl] Suspected software renderer or indirect context.
[vo/opengl] Suspected software renderer or indirect context.
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vo/vdpau] Error when calling vdp_device_create_x11: 1
[vo/xv] No Xvideo support found.
[vo/sdl] Using opengl
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
Running DIL (3.22.0) Version
DtsDeviceOpen: Opening HW in mode 0
DtsDeviceOpen: Create File Failed
Could not open codec.
Using software decoding.
VO: [sdl] 1920x1080 yuv420p
AO: [pulse] 48000Hz stereo 2ch float
AV: 00:00:00 / 00:00:43 (0%) A-V:  0.482 Dropped: 8

Audio/Video desynchronisation detected! Possible reasons include too slow
hardware, temporary CPU spikes, broken drivers, and broken files. Audio
position will not match to the video (see A-V status field).

(Paused) AV: 00:00:09 / 00:00:43 (22%) A-V: 10.792 Dropped: 215


@Anonyme

je vais regarder le bios et voir si je voie quoi que ce soit en lien avec les coeurs du processeur

Dernière modification par guyzmo (03-10-2019 12:41:03)

Hors ligne

#86 03-10-2019 12:44:25

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

guyzmo a écrit :


@Anonyme

je vais regarder le bios et voir si je voie quoi que ce soit en lien avec les coeurs du processeur




Attends l'avis d'un expert avant de bidouiller dans le bios. hmm


Audio/Video desynchronisation detected! Possible reasons include too slow
hardware

Traduction :

Désynchronisation audio/vidéo détectée ! Parmi les raisons possibles, mentionnons la lenteur excessive du processus
du matériel, des pics temporaires de CPU, des pilotes et des fichiers cassés.


 



Essaies une vidéo plus légère, "720x576" par exemple pour voir si ça passe sans laguer

Dernière modification par Anonyme (03-10-2019 12:51:24)

#87 03-10-2019 13:12:23

guyzmo
Membre
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-11-rt-amd64
(G)UI : Mate desktop
Inscription : 27-09-2019

Re : [RESOLU] vlc ne lis pas les video .mov

après avoir encoder la vidéo avec handbrake pour avoir une resolution 720*406 la video se lis bien , le son et l image son calé voilàle rendu

Playing: /home/user/Vidéos/VID_test.m4v
 (+) Video --vid=1 (*) (h264)
 (+) Audio --aid=1 --alang=eng (*) (aac)
File tags:
 Title: VID_20190818_170428
libEGL warning: DRI2: failed to authenticate
[vo/opengl] Suspected software renderer or indirect context.
[vo/opengl] Suspected software renderer or indirect context.
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vo/vdpau] Error when calling vdp_device_create_x11: 1
[vo/xv] No Xvideo support found.
[vo/sdl] Using opengl
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
Running DIL (3.22.0) Version
DtsDeviceOpen: Opening HW in mode 0
DtsDeviceOpen: Create File Failed
Could not open codec.
[lavf] Edit lists are not correctly supported (FFmpeg issue).
AO: [pulse] 48000Hz stereo 2ch float
Using software decoding.
VO: [sdl] 720x406 => 721x406 yuv420p
AV: 00:00:43 / 00:00:43 (99%) A-V:  0.000 Dropped: 226


Exiting... (End of file)



j'ai rien vue dans le bios en rapport avec le cpu , j'attend d'avoir l'avis d'expert .

Pour information mon installe de debian 9 a été assez galère car il a fallut que j ecrive "acpi=off" pour que l'installe ne plante pas celà n'as aucun lien?!

Hors ligne

#88 03-10-2019 13:19:42

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

guyzmo a écrit :



Pour information mon installe de debian 9 a été assez galère car il a fallut que j ecrive "acpi=off" pour que l'installe ne plante pas celà n'as aucun lien?!



Je ne peux pas te dire, je ne suis pas expert sur la chose hmm

#89 03-10-2019 13:23:15

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

Dis moi, tu n'a pas un Live CD, que tu pourrais charger sans installation pour vérifier au niveau du "Moniteur système Mate" si tu retrouve 4 CPU
Ça virait un doute.

Dernière modification par Anonyme (03-10-2019 13:24:21)

#90 03-10-2019 16:50:43

anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

Bonjour

il y a quelques paquets spécifiques pour intel , par exemple


The VA-API (Video Acceleration API) enables hardware accelerated video
decode/encode at various entry-points (VLD, IDCT, Motion Compensation
etc.) for the prevailing coding standards today (MPEG-2, MPEG-4
ASP/H.263, MPEG-4 AVC/H.264, and VC-1/WMV3). It provides an interface
to fully expose the video decode capabilities in today's GPUs.

This package contains the video decode and encode driver backend for the
Intel G45 chipsets and Intel HD Graphics for the Intel Core processor family.
The supported platforms include:
 * Cantiga, Intel GMA 4500MHD (GM45)
 * Ironlake, Intel HD Graphics for 2010 Intel Core processor family
 * Sandy Bridge, Intel HD Graphics for 2011 Intel Core processor family
 * Ivy Bridge
 * Haswell
 * Broadwell
 * Skylake
 * Kaby Lake
 * Coffee Lake
 * Cannon Lake

This package contains also contains the non-free encode shaders for VP8, VP9,
HEVC and AVC for generation 7.5 hardware or newer.
 


une version libre et une version propriétaire ( i965-va-driver)
la même chose pour intel-media-va-driver

libvdpau-va-gl1 etc .....
il faut chercher avec les mots clé "va" ou "vaapi" ou "intel"

il y a un paquet "vainfo" pour faire le point


Video Acceleration API (VA API) is a library ("libVA") and API specification
which enables and provides access to graphics hardware (GPU) acceleration for
video processing on Linux and UNIX based operating systems. Accelerated
processing includes video decoding, video encoding, subpicture blending and
rendering. The specification was originally designed by Intel for its GMA
(Graphics Media Accelerator) series of GPU hardware, the API is however not
limited to GPUs or Intel specific hardware, as other hardware and manufacturers
can also freely use this API for hardware accelerated video decoding.

This package provides the vainfo program.
 



il y a quelque temps j'ai optimisé un cpu/gpu intel , je ne saurai pas retrouver la trace sur le forum

ps: comme je suis tout nvidia , juste en test pour répondre a une demande

pour mesa


Mesa VA-API video acceleration drivers
 
These libraries provide the Video Acceleration API (VA-API) for Unix.
They provide accelerated video playback (incl. H.264) and video
post-processing for the supported graphics cards.

This package enables support for VA-API for some gallium drivers.
 



nota: le gpu intel doit bien fonctionner (DRM , mesa-utils , firmware ) , vérifier avec "glxinfo -B" que tout est correct et les DRM avec "dmesg"

Dernière modification par anonyme (03-10-2019 17:08:54)

#91 04-10-2019 00:43:49

guyzmo
Membre
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-11-rt-amd64
(G)UI : Mate desktop
Inscription : 27-09-2019

Re : [RESOLU] vlc ne lis pas les video .mov

@Anonyme
je viens de faire le test du live debian9 mate   et "lscpu" m'annonce bien 4 coeurs ....

je vais te citer les paquets installer en lien et faire une autres liste qui seront les paquets que je me demande si je dois les installer , si tu peux me donner ton avis ce serait simpa , Merci.

Paquet installés

-firmware-linux-free
-firmware-misc-nonfree
-intel-microcode(installé recemment)
-mesa-va-drivers
-i965-va-driver
-libdrm-intel1
-libva-drm1
-libva-wayland1
-libva-X11-1
-libva1
-libvdpau-va-gl1
-libx11-6
-libx11-dev
-libx11-doc
-va-driver-all
-vainfo
-vdpau-va-drivers




Paquets à installer?

-libyami-utils


Serait-il mieux pour moi de refaire une installe  ?!

Dernière modification par guyzmo (04-10-2019 03:52:51)

Hors ligne

#92 04-10-2019 00:50:15

guyzmo
Membre
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-11-rt-amd64
(G)UI : Mate desktop
Inscription : 27-09-2019

Re : [RESOLU] vlc ne lis pas les video .mov

glxinfo -B


name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: VMware, Inc. (0xffffffff)
    Device: llvmpipe (LLVM 3.9, 128 bits) (0xffffffff)
    Version: 13.0.6
    Accelerated: no
    Video memory: 3874MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 3.3
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.0
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.9, 128 bits)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 13.0.6
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 13.0.6
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.0 Mesa 13.0.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00



et

dmesg


[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 116 pages/cpu s437952 r8192 d28992 u2097152
[    0.000000] pcpu-alloc: s437952 r8192 d28992 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1011786
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-rt-amd64 root=UUID=0224725e-04c1-40ff-8983-d8068df1a4a0 ro i8042.nopnp acpi=off quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3944420K/4111476K available (6423K kernel code, 1155K rwdata, 2916K rodata, 1680K init, 856K bss, 167056K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[    0.000000]  RCU kthread priority: 1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:33024 nr_irqs:32 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000104] Security Framework initialized
[    0.000106] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.000117] AppArmor: AppArmor disabled by boot time parameter
[    0.001445] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.004669] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.005671] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005689] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006266] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.006267] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.006279] mce: CPU supports 6 MCE banks
[    0.006296] process: using mwait in idle threads
[    0.006301] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.006303] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.006306] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.006308] Spectre V2 : Mitigation: Full generic retpoline
[    0.006309] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.006311] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.016085] Freeing SMP alternatives memory: 24K
[    0.017180] ftrace: allocating 25279 entries in 99 pages
[    0.035985] spurious 8259A interrupt: IRQ7.
[    0.048922] smpboot: Max logical packages: 1
[    0.048930] smpboot: SMP motherboard not detected
[    0.048932] smpboot: SMP disabled
[    0.048972] TSC deadline timer enabled
[    0.049039] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.049064] ... version:                3
[    0.049066] ... bit width:              40
[    0.049067] ... generic registers:      2
[    0.049070] ... value mask:             000000ffffffffff
[    0.049071] ... max period:             0000007fffffffff
[    0.049073] ... fixed-purpose events:   3
[    0.049074] ... event mask:             0000000700000003
[    0.105270] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.113154] x86: Booted up 1 node, 1 CPUs
[    0.113158] smpboot: Total of 1 processors activated (3200.00 BogoMIPS)
[    0.114035] devtmpfs: initialized
[    0.114210] x86/mm: Memory block size: 128MB
[    0.125229] PM: Registering ACPI NVS region [mem 0x74994000-0x749d3fff] (262144 bytes)
[    0.125246] PM: Registering ACPI NVS region [mem 0x7a4d4000-0x7a5d3fff] (1048576 bytes)
[    0.125431] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.125451] futex hash table entries: 256 (order: 3, 32768 bytes)
[    0.125539] pinctrl core: initialized pinctrl subsystem
[    0.125888] NET: Registered protocol family 16
[    0.129217] cpuidle: using governor ladder
[    0.129232] cpuidle: using governor menu
[    0.129459] PCI: Using configuration type 1 for base access
[    0.133349] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.149371] ACPI: Interpreter disabled.
[    0.149542] vgaarb: loaded
[    0.153278] PCI: Probing PCI hardware
[    0.153281] PCI: root bus 00: using default resources
[    0.153284] PCI: Probing PCI hardware (bus 00)
[    0.153357] PCI host bridge to bus 0000:00
[    0.153365] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.153369] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.153373] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.153389] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.153542] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.153571] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.153585] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.153596] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.153729] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.153733] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.153795] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.153862] pci 0000:00:13.0: reg 0x20: [io  0x2060-0x207f]
[    0.153876] pci 0000:00:13.0: reg 0x24: [mem 0x9141c000-0x9141c7ff]
[    0.153942] pci 0000:00:13.0: PME# supported from D3hot
[    0.154073] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.154105] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[    0.154205] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.154338] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.154364] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
[    0.154378] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
[    0.154475] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.154594] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.154630] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[    0.154747] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.154875] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.154983] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.155105] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.155211] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.155353] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.155602] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.155658] pci 0000:00:1f.3: reg 0x10: [mem 0x91418000-0x9141801f]
[    0.155778] pci 0000:00:1f.3: reg 0x20: [io  0x2040-0x205f]
[    0.156144] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.156170] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.156210] pci 0000:01:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]
[    0.156235] pci 0000:01:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit]
[    0.156337] pci 0000:01:00.0: supports D1 D2
[    0.156341] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.165309] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.165317] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.165323] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.165450] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[    0.165483] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x9107ffff 64bit]
[    0.165553] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.165626] pci 0000:02:00.0: supports D1 D2
[    0.165629] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177322] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.177333] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    0.177364] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[    0.177461] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:229c]
[    0.177503] PCI: pci_cache_line_size set to 64 bytes
[    0.177579] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.177584] e820: reserve RAM buffer [mem 0x74994000-0x77ffffff]
[    0.177586] e820: reserve RAM buffer [mem 0x7a0d4000-0x7bffffff]
[    0.177589] e820: reserve RAM buffer [mem 0x7b342000-0x7bffffff]
[    0.181409] clocksource: Switched to clocksource refined-jiffies
[    0.211369] VFS: Disk quotas dquot_6.6.0
[    0.211411] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.211640] pnp: PnP ACPI: disabled
[    0.217146] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.217192] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.217198] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.217206] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.217225] pci 0000:02:00.0: BAR 6: assigned [mem 0x91080000-0x9108ffff pref]
[    0.217230] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.217238] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    0.217253] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.217256] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.217260] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.217263] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff]
[    0.217266] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
[    0.217346] NET: Registered protocol family 2
[    0.217801] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.218428] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
[    0.219013] TCP: Hash tables configured (established 32768 bind 32768)
[    0.219186] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[    0.219355] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[    0.219594] NET: Registered protocol family 1
[    0.219636] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.219668] PCI: setting IRQ 11 as level-triggered
[    0.219673] pci 0000:00:14.0: assigned PCI INT A -> IRQ 11
[    0.223586] PCI: CLS 64 bytes, default 64
[    0.223751] Unpacking initramfs...
[    0.976374] Freeing initrd memory: 18872K
[    0.976383] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.976387] software IO TLB: mapped [mem 0x760d4000-0x7a0d4000] (64MB)
[    0.976580] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.977397] audit: initializing netlink subsys (disabled)
[    0.977442] audit: type=2000 audit(1570128992.940:1): initialized
[    0.981152] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.986077] zbud: loaded
[    0.988643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.989098] io scheduler noop registered
[    0.989101] io scheduler deadline registered
[    0.989198] io scheduler cfq registered (default)
[    0.989379] PCI: setting IRQ 7 as level-triggered
[    0.989387] pcieport 0000:00:1c.0: assigned PCI INT A -> IRQ 7
[    0.989395] pcieport 0000:00:1c.0: sharing IRQ 7 with 0000:00:02.0
[    0.989425] pcieport 0000:00:1c.0: sharing IRQ 7 with 0000:01:00.0
[    0.989652] pcieport 0000:00:1c.1: assigned PCI INT B -> IRQ 11
[    0.989690] pcieport 0000:00:1c.1: sharing IRQ 11 with 0000:02:00.0
[    0.990013] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.990018] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.990025] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.990138] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.990141] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.990148] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[    0.990183] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.990204] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.990240] intel_idle: MWAIT substates: 0x33000020
[    0.990243] intel_idle: v0.4.1 model 0x4C
[    0.990356] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.990524] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.013048] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.013812] Linux agpgart interface v0.103
[    1.013960] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.013962] AMD IOMMUv2 functionality not available on this system
[    1.014162] i8042: PNP detection disabled
[    1.017727] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.017741] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.018093] mousedev: PS/2 mouse device common for all mice
[    1.018394] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.018492] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    1.018509] intel_pstate: Intel P-state driver initializing
[    1.019517] NET: Registered protocol family 10
[    1.022848] mip6: Mobile IPv6
[    1.022854] NET: Registered protocol family 17
[    1.022862] mpls_gso: MPLS GSO support
[    1.023348] microcode: sig=0x406c3, pf=0x1, revision=0x33e
[    1.023458] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.023888] registered taskstats version 1
[    1.023968] zswap: loaded using pool lzo/zbud
[    1.024095] ima: No TPM chip found, activating TPM-bypass!
[    1.024101] ima: Allocated hash algorithm: sha256
[    1.026785] rtc_cmos rtc_cmos: setting system clock to 2019-10-03 18:56:33 UTC (1570128993)
[    1.027026] PM: Hibernation image not present or could not be loaded.
[    1.030470] Freeing unused kernel memory: 1680K
[    1.030474] Write protecting the kernel read-only data: 12288k
[    1.032546] Freeing unused kernel memory: 1752K
[    1.040847] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.042683] Freeing unused kernel memory: 1180K
[    1.053263] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.090342] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.090613] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.090645] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.166084] SCSI subsystem initialized
[    1.169904] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.169959] r8169 0000:01:00.0: assigned PCI INT A -> IRQ 7
[    1.169967] r8169 0000:01:00.0: sharing IRQ 7 with 0000:00:02.0
[    1.170556] usbcore: registered new interface driver usbfs
[    1.170580] usbcore: registered new interface driver hub
[    1.172090] usbcore: registered new device driver usb
[    1.182780] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffac26c0a41000, 30:65:ec:77:b3:8b, XID 14100800 IRQ 18
[    1.182785] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.183846] PCI: setting IRQ 1 as level-triggered
[    1.183856] i801_smbus 0000:00:1f.3: found PCI INT B -> IRQ 1
[    1.185222] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.186052] xhci_hcd 0000:00:14.0: assigned PCI INT A -> IRQ 11
[    1.186138] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.186151] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.191291] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[    1.191307] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.192768] libata version 3.00 loaded.
[    1.196589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.196594] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.196597] usb usb1: Product: xHCI Host Controller
[    1.196599] usb usb1: Manufacturer: Linux 4.9.0-11-rt-amd64 xhci-hcd
[    1.196601] usb usb1: SerialNumber: 0000:00:14.0
[    1.196893] hub 1-0:1.0: USB hub found
[    1.196928] hub 1-0:1.0: 7 ports detected
[    1.197463] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.197471] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.197590] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.197593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.197596] usb usb2: Product: xHCI Host Controller
[    1.197598] usb usb2: Manufacturer: Linux 4.9.0-11-rt-amd64 xhci-hcd
[    1.197600] usb usb2: SerialNumber: 0000:00:14.0
[    1.198930] hub 2-0:1.0: USB hub found
[    1.199911] hub 2-0:1.0: 6 ports detected
[    1.201451] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
[    1.201495] ahci 0000:00:13.0: version 3.0
[    1.201512] PCI: setting IRQ 6 as level-triggered
[    1.201520] ahci 0000:00:13.0: found PCI INT A -> IRQ 6
[    1.208921] SSE version of gcm_enc/dec engaged.
[    1.213149] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.213156] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
[    1.224984] scsi host0: ahci
[    1.236867] scsi host1: ahci
[    1.237021] ata1: SATA max UDMA/133 abar m2048@0x9141c000 port 0x9141c100 irq 20
[    1.237025] ata2: SATA max UDMA/133 abar m2048@0x9141c000 port 0x9141c180 irq 20
[    1.298452] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.529221] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.565062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.565103] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.565840] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[    1.565845] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.566740] ata1.00: configured for UDMA/133
[    1.568194] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
[    1.569253] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[    1.570606] ata2.00: configured for UDMA/100
[    1.600355] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8HC    1.00 PQ: 0 ANSI: 5
[    1.628103] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.628106] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.628239] sd 0:0:0:0: [sda] Write Protect is off
[    1.628242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.628298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.644358] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.644361] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.644846] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.685562] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4a5f08)
[    1.687244] usb 1-3: New USB device found, idVendor=04f2, idProduct=b47f
[    1.687250] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.687254] usb 1-3: Product: VGA Webcam
[    1.687257] usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.687259] usb 1-3: SerialNumber: 0x0001
[    1.696581] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[    1.706353] psmouse serio1: elantech: Elan sample query result 09, 38, 95
[    1.721098]  sda: sda1 sda2
[    1.723328] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.759508] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2
[    1.808057] random: fast init done
[    1.811015] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.951744] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
[    1.951751] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.951756] usb 1-5: Product: USB2.0 Hub
[    1.953390] hub 1-5:1.0: USB hub found
[    1.953701] hub 1-5:1.0: 4 ports detected
[    1.993790] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    1.993814] clocksource: Switched to clocksource tsc
[    2.153892] PM: Starting manual resume from disk
[    2.153899] PM: Hibernation image partition 8:1 present
[    2.153900] PM: Looking for hibernation image.
[    2.154109] PM: Image not found (code -22)
[    2.154111] PM: Hibernation image not present or could not be loaded.
[    2.241828] usb 1-5.1: new full-speed USB device number 4 using xhci_hcd
[    2.343390] usb 1-5.1: New USB device found, idVendor=0489, idProduct=e078
[    2.343397] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.425802] usb 1-5.4: new high-speed USB device number 5 using xhci_hcd
[    2.484755] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.526169] usb 1-5.4: New USB device found, idVendor=0bda, idProduct=0129
[    2.526177] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.526181] usb 1-5.4: Product: USB2.0-CRW
[    2.526184] usb 1-5.4: Manufacturer: Generic
[    2.526187] usb 1-5.4: SerialNumber: 20100201396000000
[    2.542692] usbcore: registered new interface driver rtsx_usb
[    3.805446] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.921099] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.921524] systemd[1]: Detected architecture x86-64.
[    3.942122] systemd[1]: Set hostname to <debian>.
[    4.560721] random: crng init done
[    4.560726] random: 7 urandom warning(s) missed due to ratelimiting
[    5.420906] systemd[1]: Created slice System Slice.
[    5.423305] systemd[1]: Mounting POSIX Message Queue File System...
[    5.425997] systemd[1]: Mounting Debug File System...
[    5.426244] systemd[1]: Reached target User and Group Name Lookups.
[    5.427224] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.427525] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.427877] systemd[1]: Listening on Journal Audit Socket.
[    5.959918] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    6.158059] systemd-journald[211]: Received request to flush runtime journal from PID 1
[    6.535348] lp: driver loaded but no devices found
[    6.666155] ppdev: user-space parallel port driver
[    9.105398] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.203912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.204039] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    9.253798] [drm] Initialized
[    9.570543] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    9.794633] PCI: setting IRQ 10 as level-triggered
[    9.794642] snd_hda_intel 0000:00:1b.0: assigned PCI INT A -> IRQ 10
[    9.803867] snd_hda_intel 0000:00:1b.0: failed to add i915 component master (-19)
[   10.125672] Bluetooth: Core ver 2.22
[   10.126314] NET: Registered protocol family 31
[   10.126318] Bluetooth: HCI device and connection manager initialized
[   10.126326] Bluetooth: HCI socket layer initialized
[   10.126331] Bluetooth: L2CAP socket layer initialized
[   10.126349] Bluetooth: SCO socket layer initialized
[   10.152856] iTCO_vendor_support: vendor-support=0
[   10.154545] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.154626] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[   10.155714] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.250798] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.250806] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.250812] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.250815] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.250817] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.250823] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1b
[   10.286410] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[   10.287363] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[   10.297009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   10.299000] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   10.299608] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.518538] usbcore: registered new interface driver btusb
[   10.675470] usb 1-5.1: firmware: direct-loading firmware ar3k/AthrBT_0x31010000.dfu
[   10.798092] usb 1-5.1: firmware: direct-loading firmware ar3k/ramps_0x31010000_40.dfu
[   10.808094] usbcore: registered new interface driver ath3k
[   10.830008] intel_rapl: Found RAPL domain package
[   10.830012] intel_rapl: Found RAPL domain core
[   10.880207] usb 1-5.1: USB disconnect, device number 4
[   11.105747] usb 1-5.1: new full-speed USB device number 6 using xhci_hcd
[   11.206981] usb 1-5.1: New USB device found, idVendor=0489, idProduct=e078
[   11.206989] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.734779] ath9k 0000:02:00.0: assigned PCI INT A -> IRQ 11
[   11.735080] ath: phy0: WB335 2-ANT card detected
[   11.735083] ath: phy0: Set BT/WLAN RX diversity capability
[   11.744071] ath: phy0: Enable LNA combining
[   11.745317] ath: phy0: ASPM enabled: 0x42
[   11.745320] ath: EEPROM regdomain: 0x6c
[   11.745321] ath: EEPROM indicates we should expect a direct regpair map
[   11.745324] ath: Country alpha2 being used: 00
[   11.745326] ath: Regpair used: 0x6c
[   11.988700] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.989397] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffac26c1000000, irq=11
[   11.996556] media: Linux media interface: v0.10
[   12.144519] Linux video capture interface: v2.00
[   12.359825] uvcvideo: Found UVC 1.00 device VGA Webcam (04f2:b47f)
[   12.366424] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[   12.366436] uvcvideo 1-3:1.0: Entity type for entity Extension 7 was not initialized!
[   12.366441] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[   12.366446] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[   12.367563] input: VGA Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input7
[   12.368559] usbcore: registered new interface driver uvcvideo
[   12.368562] USB Video Class driver (1.1.1)
[   12.611043] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   12.799922] Adding 15624188k swap on /dev/sda1.  Priority:-1 extents:1 across:15624188k FS
[   21.203647] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   21.267284] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[   21.328449] r8169 0000:01:00.0 enp1s0: link down
[   21.328640] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   21.378940] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   21.393697] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   21.462953] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   22.612323] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   37.502177] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   38.572171] wlp2s0: authenticate with 00:19:70:74:90:c7
[   38.599051] wlp2s0: send auth to 00:19:70:74:90:c7 (try 1/3)
[   38.601799] wlp2s0: authenticated
[   38.609923] wlp2s0: associate with 00:19:70:74:90:c7 (try 1/3)
[   38.614053] wlp2s0: RX AssocResp from 00:19:70:74:90:c7 (capab=0x431 status=0 aid=6)
[   38.614199] wlp2s0: associated
[   38.838343] ath: EEPROM regdomain: 0x80fa
[   38.838347] ath: EEPROM indicates we should expect a country code
[   38.838350] ath: doing EEPROM country->regdmn map search
[   38.838351] ath: country maps to regdmn code: 0x37
[   38.838353] ath: Country alpha2 being used: FR
[   38.838355] ath: Regpair used: 0x37
[   38.838359] ath: regdomain 0x80fa dynamically updated by country IE
[   38.840055] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1248.115509] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 1489.820583] perf: interrupt took too long (3150 > 3133), lowering kernel.perf_event_max_sample_rate to 63500
[ 1710.204373] perf: interrupt took too long (3959 > 3937), lowering kernel.perf_event_max_sample_rate to 50500
[ 2125.631154] perf: interrupt took too long (4952 > 4948), lowering kernel.perf_event_max_sample_rate to 40250
[ 2802.977160] perf: interrupt took too long (6200 > 6190), lowering kernel.perf_event_max_sample_rate to 32250
[ 4891.646059] perf: interrupt took too long (7756 > 7750)
kernel.perf_event_max_sample_rate to 25750



Voyez vous une erreur car pour moi je comprend pas tout.
MERCI

Hors ligne

#93 04-10-2019 04:58:37

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

guyzmo a écrit :

@Anonyme
je viens de faire le test du live debian9 mate   et "lscpu" m'annonce bien 4 coeurs ....




Bonjour,

Donc, quelque chose merdouille sur ton installation. Ton matos, n'est pas en cause wink
Au niveau, des messages d'erreurs sur les différents choix de décodages dans la méthode Auto, tu n'es pas le seul sur le net à les avoir.
Il faut régler le problème de ces "3 CPU manquant" ( Personnellement, je ferais une installation propre, mais bon, ce n'est que mon avis.)


@anonyme

Bonjour,

dans dmesg, tu as :

x86: Booted up 1 node, 1 CPUs



?

How to fix that only one out of four cores of my CPU is detected?
https://askubuntu.com/questions/247028/ … s-detected

Dernière modification par Anonyme (04-10-2019 05:09:40)

#94 04-10-2019 08:11:32

anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

Bonjour

de ton #92 , ton gpu fonctionne mal


name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: VMware, Inc. (0xffffffff)
    Device: llvmpipe (LLVM 3.9, 128 bits) (0xffffffff)
    Version: 13.0.6
    Accelerated: no
 



commencer par le faire fonctionner correctement , sûrement un problème de DRM
a tout hasard , ce paquet est installé ? (oui selon ton #91  "paquet installé" )


apt-cache policy firmware-misc-nonfree
 



demande une bonne commande avec grep de dmesg
du genre


dmesg | grep drm
 


ps: tu peu remplacer "DRM" par "intel" (j'ai un peu regardé ton retour de dmesg , mais rien trouvé )

le retour de cette commande


journalctl -r -p err
 



on devrait voir les erreurs en autre du gpu

pour ceci


x86: Booted up 1 node, 1 CPUs
 



node et cpu c'est le nombre de processeur dans la machine , sinon c'est "cores" et "threads" , a faire confirmer  wink

Dernière modification par anonyme (04-10-2019 08:47:29)

#95 04-10-2019 08:26:26

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

On va y arriver tout doucement smile

#96 04-10-2019 08:31:06

anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

par exemple sur ma machine j'ai bien 1 nodes et 4 cpu (threads) , faut faire confirmer par un barbu roll


dmesg | grep node
 



[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009e0ffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20b000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x000000001129bfff]
[    0.000000]   node   0: [mem 0x00000000112b5000-0x000000001a133fff]
[    0.000000]   node   0: [mem 0x000000001a22e000-0x000000001a32ffff]
[    0.000000]   node   0: [mem 0x000000001b77d000-0x000000001dffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f33ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
[    0.000000] On node 0 totalpages: 3390308
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1
[    0.014107] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.130365] .... node  #0, CPUs:        #1  #2  #3
[    0.136065] smp: Brought up 1 node, 4 CPUs
[    3.868931] Parsing CRAT table with 1 nodes
[    3.869024] Topology: Add APU node [0x0:0x0]
[    4.170643] Topology: Add APU node [0x15dd:0x1002]
 


ps: tu peu tester la commande

Dernière modification par anonyme (04-10-2019 08:34:16)

#97 04-10-2019 08:33:52

anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

idem pour ceci (pour toi "intel" a la place de "amdgpu"


dmesg | grep amdgpu
 



[    3.868740] [drm] amdgpu kernel modesetting enabled.
[    3.870759] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    3.870760] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
[    3.870761] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfcb00000 -> 0xfcb7ffff
[    3.870763] fb0: switching to amdgpudrmfb from EFI VGA
[    3.871696] amdgpu 0000:08:00.0: vgaarb: deactivate vga console
[    3.877196] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_gpu_info.bin
[    3.877614] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_sdma.bin
[    3.898476] amdgpu 0000:08:00.0: VRAM: 3072M 0x000000F400000000 - 0x000000F4BFFFFFFF (3072M used)
[    3.898477] amdgpu 0000:08:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    3.898478] amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    3.898603] [drm] amdgpu: 3072M of VRAM memory ready
[    3.898606] [drm] amdgpu: 3072M of GTT memory ready.
[    3.899722] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_asd.bin
[    3.902522] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_pfp.bin
[    3.905574] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_me.bin
[    3.907736] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_ce.bin
[    3.910019] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_rlc.bin
[    3.912715] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_mec.bin
[    3.913954] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_mec2.bin
[    3.925632] amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/raven_vcn.bin
[    4.139351] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[    4.172180] fbcon: amdgpudrmfb (fb0) is primary device
[    4.220042] amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
[    4.236108] amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
[    4.236111] amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    4.236112] amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    4.236113] amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    4.236115] amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    4.236116] amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    4.236117] amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    4.236118] amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    4.236119] amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    4.236120] amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    4.236122] amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
[    4.236123] amdgpu 0000:08:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
[    4.236124] amdgpu 0000:08:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    4.236125] amdgpu 0000:08:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    4.236127] amdgpu 0000:08:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[    4.262260] [drm] Initialized amdgpu 3.32.0 20150101 for 0000:08:00.0 on minor 0
 

#98 04-10-2019 08:36:32

anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

pour les "drm" , c'est en minuscule (et pas DRM  roll  )


dmesg | grep drm
 



[    3.868740] [drm] amdgpu kernel modesetting enabled.
[    3.870763] fb0: switching to amdgpudrmfb from EFI VGA
[    3.874511] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1043:0x876B 0xC8).
[    3.874527] [drm] register mmio base: 0xFCB00000
[    3.874527] [drm] register mmio size: 524288
[    3.874555] [drm] add ip block number 0 <soc15_common>
[    3.874555] [drm] add ip block number 1 <gmc_v9_0>
[    3.874556] [drm] add ip block number 2 <vega10_ih>
[    3.874556] [drm] add ip block number 3 <psp>
[    3.874557] [drm] add ip block number 4 <gfx_v9_0>
[    3.874558] [drm] add ip block number 5 <sdma_v4_0>
[    3.874558] [drm] add ip block number 6 <powerplay>
[    3.874559] [drm] add ip block number 7 <dm>
[    3.874560] [drm] add ip block number 8 <vcn_v1_0>
[    3.877619] [drm] VCN decode is enabled in VM mode
[    3.877620] [drm] VCN encode is enabled in VM mode
[    3.877620] [drm] VCN jpeg decode is enabled in VM mode
[    3.898402] [drm] BIOS signature incorrect 0 0
[    3.898459] [drm] RAS INFO: ras initialized successfully, hardware ability[0] ras_mask[0]
[    3.898461] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.898482] [drm] Detected VRAM RAM=3072M, BAR=3072M
[    3.898482] [drm] RAM width 128bits DDR4
[    3.898603] [drm] amdgpu: 3072M of VRAM memory ready
[    3.898606] [drm] amdgpu: 3072M of GTT memory ready.
[    3.898616] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    3.898758] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[    3.923240] [drm] use_doorbell being set to: [true]
[    3.925636] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[    3.925643] [drm] PSP loading VCN firmware
[    3.946699] [drm] reserve 0x400000 from 0xf400c00000 for PSP TMR SIZE
[    4.139041] [drm] DM_PPLIB: values for F clock
[    4.139043] [drm] DM_PPLIB:   400000 in kHz
[    4.139044] [drm] DM_PPLIB:   933000 in kHz
[    4.139044] [drm] DM_PPLIB:   1200000 in kHz
[    4.139045] [drm] DM_PPLIB:   1467000 in kHz
[    4.139046] [drm] DM_PPLIB: values for DCF clock
[    4.139047] [drm] DM_PPLIB:   300000 in kHz
[    4.139048] [drm] DM_PPLIB:   600000 in kHz
[    4.139048] [drm] DM_PPLIB:   626000 in kHz
[    4.139049] [drm] DM_PPLIB:   654000 in kHz
[    4.139351] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[    4.145375] [drm] Display Core initialized with v3.2.27!
[    4.158343] [drm] SADs count is: -2, don't need to read it
[    4.158459] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.158459] [drm] Driver supports precise vblank timestamp query.
[    4.169632] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[    4.172129] [drm] fb mappable at 0x21000000
[    4.172130] [drm] vram apper at 0x20000000
[    4.172131] [drm] size 8294400
[    4.172131] [drm] fb depth is 24
[    4.172132] [drm]    pitch is 7680
[    4.172180] fbcon: amdgpudrmfb (fb0) is primary device
[    4.220042] amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
[    4.262260] [drm] Initialized amdgpu 3.32.0 20150101 for 0000:08:00.0 on minor 0
 



pour le cpu , tu a le "moniteur systéme" de ton bureau et "hardinfo" qui te donnera le nombre de cores/threads actif
le seul moyen de limiter le nombre de cores c'est par le bios (et pas tous) ou alors le cpu mal détecté mais jamais vue ça hmm
pour hardinfo tu installe le paquet


apt-get --reinstall install hardinfo
 


c'est une application graphique , tu va dans "cpu" et tu aura la description
dans ton menu => "information et benchmark du système"

Dernière modification par anonyme (04-10-2019 08:42:32)

#99 04-10-2019 08:38:27

Anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

@guyzmo


guyzmo a écrit :

.... par contre est ce que ça peux venir du acpi , car pour pouvoir installer debian sur ma machine j'ai du rajouter en ligne de commande au niveau du grub( avant 1re installation) "acpi=off"car sinon ça ne fonctionner pas .. peux etre est-ce lié?




cat /proc/cmdline




anonyme a écrit :


...
pour le cpu , tu a le "moniteur systéme" de ton bureau et "hardinfo" qui te donnera le nombre de cores/threads actif
le seul moyen de limiter le nombre de cores c'est par le bios (et pas tous)



Je lui ai déjà fait faire la manipulation wink

Dernière modification par Anonyme (04-10-2019 08:47:31)

#100 04-10-2019 08:45:22

anonyme
Invité

Re : [RESOLU] vlc ne lis pas les video .mov

hummm acpi=off c'est du provisoire , sans l'option la machine ne démarre pas ?
pas la peine de chercher plus , la machine ne fonctionnera jamais correctement si tu ignore les tables "acpi"

ps: j'ai modifié mon #94

enlève ce "acpi=off" et dit nous si la machine démarre et répond aux exemples (entre autre le #94 )

Dernière modification par anonyme (04-10-2019 08:53:51)

Pied de page des forums