Impossible de booter sur Debian

nam1962 · 01-01-2020 10:05:09

Hello !

Il m'arrive un truc curieux : j'installe Debian + Xfce sur l'ordi d''une cousine qui était sous W10, totalement vérolé et d'une lenteur inimaginable.

Je désactive fast boot et secure boot sur le Bios, j'installe Debian et là, je boucle sur le Bios au démarrage. Il n'indique plus d'ordre de boot (rien dans le menu).
Boot sur clef USB reste possible.
Par curiosité je teste une clef Manjaro qui me propose de choisir dans les bootloaders.
Le bootloader grub de Debian permet alors de démarrer.
Et là tout fonctionne parfaitement, y compris l'extinction.

Mais aucun démarrage sans cette curieuse procédure.
J'ai tenté ReFind, rien de mieux, Manjaro tout seul, rien de mieux.

~$ df -Th

Sys. de fichiers Type     Taille Utilisé Dispo Uti% Monté sur

udev             devtmpfs   1,9G       0  1,9G   0% /dev

tmpfs            tmpfs      384M    6,1M  378M   2% /run

/dev/mmcblk0p2   ext4        57G     12G   43G  21% /

tmpfs            tmpfs      1,9G     38M  1,9G   2% /dev/shm

tmpfs            tmpfs      5,0M    4,0K  5,0M   1% /run/lock

tmpfs            tmpfs      1,9G       0  1,9G   0% /sys/fs/cgroup

/dev/mmcblk0p1   vfat       248M    6,1M  242M   3% /boot/efi

/dev/sda4        ext4       458G    6,3G  428G   2% /home

tmpfs            tmpfs      384M     12K  384M   1% /run/user/1000

:~$ inxi -Fxxz

System:    Host: ordinosaure Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 Desktop: Xfce 4.12.4 

           tk: Gtk 2.24.32 wm: xfwm4 dm: LightDM Distro: Debian GNU/Linux 10 (buster) 

Machine:   Type: Portable System: Medion product: Akoya S6214T v: 1.0 serial: <filter> Chassis: type: 8 serial: <filter> 

           Mobo: Medion model: Akoya S6214T v: 1.0 serial: <filter> UEFI: American Megatrends v: 207 date: 09/30/2014 

Battery:   ID-1: BAT0 charge: 31.9 Wh condition: 32.7/35.8 Wh (91%) volts: 12.8/11.4 model: TKBSS T153355 serial: <filter> 

           status: Unknown 

           ID-2: BAT1 charge: 23.6 Wh condition: 23.8/28.1 Wh (85%) volts: 8.3/7.4 model: TKBSS T154150 serial: <filter> 

           status: Charging 

CPU:       Topology: Quad Core model: Intel Pentium N3540 bits: 64 type: MCP arch: Silvermont rev: 8 L2 cache: 1024 KiB 

           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 17326 

           Speed: 500 MHz min/max: 500/2166 MHz Core speeds (MHz): 1: 500 2: 500 3: 973 4: 1722 

Graphics:  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display vendor: Pegatron driver: i915 v: kernel 

           bus ID: 00:02.0 chip ID: 8086:0f31 

           Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa resolution: 1920x1080~60Hz 

           OpenGL: renderer: Mesa DRI Intel Bay Trail v: 4.2 Mesa 18.3.6 compat-v: 3.0 direct render: Yes 

Audio:     Device-1: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio vendor: Pegatron driver: snd_hda_intel 

           v: kernel bus ID: 00:1b.0 chip ID: 8086:0f04 

           Sound Server: ALSA v: k4.19.0-6-amd64 

Network:   Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel port: f000 bus ID: 01:00.0 chip ID: 8086:08b3 

           IF: wlp1s0 state: up mac: <filter> 

Drives:    Local Storage: total: 527.75 GiB used: 17.51 GiB (3.3%) 

           ID-1: /dev/mmcblk0 model: HCG8e size: 58.25 GiB serial: <filter> 

           ID-2: /dev/sda vendor: Western Digital model: WD5000LPCX-22VHAT1 size: 465.76 GiB speed: 1.5 Gb/s serial: <filter> 

           temp: 29 C 

           ID-3: /dev/sdb type: USB model: General USB Flash Disk size: 3.73 GiB serial: <filter> 

Partition: ID-1: / size: 56.84 GiB used: 11.30 GiB (19.9%) fs: ext4 dev: /dev/mmcblk0p2 

           ID-2: /home size: 457.45 GiB used: 6.21 GiB (1.4%) fs: ext4 dev: /dev/sda4 

Sensors:   System Temperatures: cpu: 49.0 C mobo: N/A 

           Fan Speeds (RPM): N/A 

Info:      Processes: 175 Uptime: 16m Memory: 3.75 GiB used: 1.25 GiB (33.3%) Init: systemd v: 241 runlevel: 5 Compilers: 

           gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: xfce4-terminal inxi: 3.0.32

Toute suggestion pour trouver comment booter sera tout bienvenue !

Jolie année à vous !

Dernière modification par nam1962 (05-01-2020 19:15:26)

raleur · 01-01-2020 10:17:25

Encore l'UEFI qui fait des siennes à tous les coups.
Essaye ça :

grub-install --removable

Je serais aussi intéressé par la sortie de

efibootmgr

Avec certains firmwares UEFI, on doit "enregistrer" le chargeur d'amorçage dans les paramètres de boot pour qu'ils acceptent de démarrer avec.

Si le firmware supporte l'amorçage BIOS/legacy, il peut être plus simple d'utiliser ce type d'amorçage, plus simple, pour s'épargner tous les bugs et contraintes débiles de l'amorçage UEFI natif.

nam1962 · 01-01-2020 12:24:02

Hello et merci !

:~$ efibootmgr

BootCurrent: 0003

Timeout: 6 seconds

BootOrder: 0003,0002,0000

Boot0000* rEFInd Boot Manager

Boot0002* debian

Boot0003* UEFI: General USB Flash Disk 1.0

Le grub-install est bien passé, je redémarre pour voir

raleur · 01-01-2020 17:24:53

Du nouveau ?
En tout cas il y a bien des entrées de boot EFI pour rEFInd et Debian. Si elles n'apparaissent pas dans les options d'amorçage UEFI du firmware, cela vient du firmware lui-même. J'ai déjà vu des firmwares qui semblaient ignorer totalement ces variables de boot.

nam1962 · 01-01-2020 18:46:35

Re !
Je suis rouge de honte et de rage !
Suite au grub-install, ça a quasi fonctionné : le Bios revoyait des bootloaders et l'un d'eux fonctonnait (UEFI je ne sais quoi) - un autre nommé debian me laissait à la porte, bloquant sur unable to load memory je ne sais plus quoi.
Bref, il fallait systématiquement passer par le Bios pour sélectionner le bon (il y avait 7 bootloaders suite à mes bidouilles antérieures).
Mais... Je les aivirés, puis ai eu l'idée idiote de reformater /boot/efi avec gparted.
Du coup suis bloqué !

As-tu une suggestion ou dois je faire une réinstall ?

Dernière modification par nam1962 (01-01-2020 19:46:22)

raleur · 01-01-2020 18:56:18

Démarrer avec l'installateur en mode rescue ou un système live, chrooter le système installé, monter la partition EFI sur /boot/efi et exécuter à nouveau

grub-install --removable

Je relance aussi la sugggestion de refaire l'amorçage en mode legacy si le firmware le supporte. Moins d'ennuis.

nam1962 · 01-01-2020 19:42:00

arf... ce bios ne propose pas de legacy...

je rame pour chrooter

root@debian:/home/user# mkdir /mnt/chroot

root@debian:/home/user# mount /dev/mmcblk0p1 /mnt/chroot

root@debian:/home/user# mount /dev/mmcblk0p1 /mnt/chroot/boot

mount: /mnt/chroot/boot: le point de montage n'existe pas.

root@debian:/home/user# lsblk

NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT

loop0          7:0    0   2,3G  1 loop /usr/lib/live/mount/rootfs/filesystem.squ

sda            8:0    0 465,8G  0 disk 

└─sda4         8:4    0 465,8G  0 part /media/user/b5e69839-5742-4fbc-8f27-5ad4c

sdb            8:16   1   3,8G  0 disk 

├─sdb1         8:17   1   2,7G  0 part /usr/lib/live/mount/medium

└─sdb2         8:18   1   2,9M  0 part 

mmcblk0      179:0    0  58,3G  0 disk 

├─mmcblk0p1  179:1    0   250M  0 part /mnt/chroot

└─mmcblk0p2  179:2    0    58G  0 part /media/user/5a61ae33-c233-45f4-83ae-7fad2

mmcblk0boot0 179:256  0     4M  1 disk 

mmcblk0boot1 179:512  0     4M  1 disk

[Edit] j'ai corrigé mes numéros de disque, mais maintenant j'ai

chroot /mnt/chroot

bash: chroot : commande introuvable

Dernière modification par nam1962 (01-01-2020 19:57:16)

raleur · 01-01-2020 20:06:15

A mon avis c'est plus simple de chrooter avec le mode rescue de l'installateur Debian que depuis un système live. Mais c'est toi qui vois...
Ce n'est pas la partition EFI qu'il faut monter sur le point de montage à chrooter, c'est la racine du système installé donc /dev/mmcblk0p2. Ne pas la monter dans /media. Et pas besoin de créer un répertoire "chroot" dans /mnt, /mnt peut servir directement de point de montage, il est prévu pour ça.

umount /dev/mmcblk0p1

umount /dev/mmcblk0p2

mount /dev/mmcblk0p2 /mnt

mount /dev/mmcblk0p1 /mnt/boot/efi

mount --rbind /proc /mnt/proc

mount --rbind /dev /mnt/dev

mount --rbind /sys /mnt/sys

chroot /mnt

Note que si grub-install est disponible dans le système live, tu peux réinstaller GRUB sans chroot :

umount /dev/mmcblk0p1

umount /dev/mmcblk0p2

mount /dev/mmcblk0p2 /mnt

mount /dev/mmcblk0p1 /mnt/boot/efi

grub-install --removable --boot-directory=/mnt/boot --efi-directory=/mnt/boot/efi

Edit : chroot est dans les coreutils, ce serait étonnant qu'il ne soit pas présent. Il est normalement dans /usr/sbin. Quel système live est-ce ?

Dernière modification par raleur (01-01-2020 20:12:52)

nam1962 · 01-01-2020 20:34:04

Vu, mais je coince à nouveau sur :

 bash: chroot : commande introuvable

raleur · 01-01-2020 21:03:30

C'est quel système live ?
Si grub-install est présent, tu peux tenter l'autre méthode.

nam1962 · 02-01-2020 09:48:41

C'est l'iso d-live nf 10.2.0 xf amd64 - soit sur Debian live with localisation soit sur debian installer (qui ne propose pas de recovery)

Comme je coinçais de partout, j'ai réinstallé (pas trop long car install neuve)
Il y a du mieux car ça trouve le bootloader, mais je rencontre deux sujets aléatoires :
- login/mot de passe non reconnus alors qu'ils sont bons - quand je réussis à loguer en tripotant le boot order je vois bien que c'est bon.
- le fait que l'un des bootloader ne logue pas

:~$ efibootmgr

BootCurrent: 0000

Timeout: 6 seconds

BootOrder: 0000,0002,0003

Boot0000* debian

Boot0002* UEFI OS

Boot0003* UEFI: General USB Flash Disk 1.0

[Edit] Groumpf, maintenant, après avoir démarré deux fois plus ou moins péniblement, il me fait tous les gags :
- soit il bloque sur "chargement du disque mémoire initial"
- soit il bloque sur un curseur clignotant en haut à gauche et aucun accès aux tty
- quand de là j'appuie sur le bouton power, lil stoppe tous les services puis bloque sur reboot: Power down

(j'utilise systemd-swap mais dans les sessions qui ont fonctionné il n'y avait pas de problème)

[Edit 2] j'ai fait un fsck sans erreurs sur le SD et un smartcontrol short sur le HDD sans erreurs

Dernière modification par nam1962 (02-01-2020 10:48:15)

raleur · 02-01-2020 15:04:44

nam1962 a écrit :

- login/mot de passe non reconnus alors qu'ils sont bons - quand je réussis à loguer en tripotant le boot order je vois bien que c'est bon.
- le fait que l'un des bootloader ne logue pas

Pourrais-tu être plus explicite ?

nam1962 · 03-01-2020 13:35:58

Hello, j'ai été un peu bousculé, en déplacements et mes réponses sont hachées !
1. après avoir passé les commandes prescrites, je suis tombé sur l'interface de login, mais pas possible de se loguer because mot de passe pas reconnu...
2.depuis et ayant fait une clean install, j'en suis à :
- soit il bloque sur "chargement du disque mémoire initial"
- soit il bloque sur un curseur clignotant en haut à gauche et aucun accès aux tty
- quand de là j'appuie sur le bouton power, il stoppe tous les services puis bloque sur reboot: Power down
Puis.....
- j'ai ajouté en chroot nomodeset au grub et maintenant le blocage est du genre : "hdaudio (...) unable to bind the codec"

Dernière modification par nam1962 (03-01-2020 13:36:15)

raleur · 03-01-2020 14:28:52

Et en mode dépannage ?

nam1962 · 03-01-2020 15:04:02

En mode dépannage ça bloque sur systemd-swap :

(13.215747] Adding 524284k swap on /var/lib/systemd-swap/swapc/1. priority-2 extents:17 across 3366908k SSFS

..puis si je tapes [Entrée] je vois défiler une dizaine de lignes et ça bloque sur un curseur clignotant en haut à gauche.
Impossible d'accèder au tty.
(je n'ai pas pu activer le service haveged à ce stade)

[Edit] au bout de plein de temps

[2141.06...] IPV6: ADDRCONF (NETDEV_UP): wlps0: link is not ready

Et toujours total blocage...

Dernière modification par nam1962 (03-01-2020 17:04:17)

raleur · 03-01-2020 17:42:04

nam1962 a écrit :

puis si je tapes [Entrée] je vois défiler une dizaine de lignes

Quelles lignes ?

nam1962 a écrit :

et ça bloque sur un curseur clignotant en haut à gauche

L'écran s'est effacé ou contient toujours les lignes précédentes ?

nam1962 · 03-01-2020 18:05:55

Pour ta première question : impossible à dire : une dizaine de lignes qui défilent à toute vitesse
Pour ta seconde question : l'écran est effacé, le curseur est en haut à gauche puis à intervalle très long et très différent, arrive le message :

[2141.06.....] IPv6: ADDRCONF (NETDEV_UP): wlp1s0: link is not ready

[Edit] si j'appuie sur le bouton power, j'obtiens ceci (bloqué ensuite, seul moyen, éteindre de force)

Dernière modification par nam1962 (03-01-2020 18:44:43)

nam1962 · 04-01-2020 15:52:46

J'ai supprimé nomodeset, je reviens au blocage initial : curseur en haut à gauche d'un écran noir muet...

Entretemps, j'ai flashé le Bios qui est passé d'une 2.02 datant de 2013 à une 7.04 datant de 2016 (rien n'a changé dans le menu Bios et aucune possibilité de désactiver l'UEFI)

Dernière modification par nam1962 (04-01-2020 15:59:02)

nam1962 · 04-01-2020 19:23:38

Ah, du nettement mieux !
J'ai à nouveau tout réinstallé en prenant soin de recréer /boot/efi.
Après premier redémarrage, je n'ai pas remis systemd-swap que je mets sur toutes mes autres installs mais une swap classique :

:~$ lsblk

NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT

sda            8:0    0 465,8G  0 disk 

├─sda1         8:1    0   6,5G  0 part [SWAP]

└─sda4         8:4    0 459,2G  0 part /home

mmcblk0      179:0    0  58,3G  0 disk 

├─mmcblk0p1  179:1    0   250M  0 part /boot/efi

└─mmcblk0p2  179:2    0    58G  0 part /

mmcblk0boot0 179:256  0     4M  1 disk 

mmcblk0boot1 179:512  0     4M  1 disk

Il me reste deux petits soucis :
- il y a trois bootloaders, seul l'UEFI OS est opérationnel, mais ils tournent et je suis obligé de repasser une fois sur deux par le Bios.
Comment ne garder que le bon ? (Exemple là : debian est repassé en premier)

:~$ efibootmgr

BootCurrent: 0002

Timeout: 6 seconds

BootOrder: 0000,0002

Boot0000* debian

Boot0002* UEFI OS

- le démarrage est un peu lent :

[    0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22

[    0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=9115f7fa-aaf5-4499-9726-ccd0575b5434 ro quiet

[    0.000000] x86/fpu: x87 FPU will use FXSAVE

[    0.000000] BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable

[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable

[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b928afff] usable

[    0.000000] BIOS-e820: [mem 0x00000000b928b000-0x00000000b92bafff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000b92bb000-0x00000000b92d4fff] ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000b92d5000-0x00000000b9932fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000b9933000-0x00000000b9be1fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000b9be2000-0x00000000b9c2dfff] type 20

[    0.000000] BIOS-e820: [mem 0x00000000b9c2e000-0x00000000b9c2efff] usable

[    0.000000] BIOS-e820: [mem 0x00000000b9c2f000-0x00000000b9c70fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000b9c71000-0x00000000b9dd9fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000b9dda000-0x00000000b9ff9fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] efi: EFI v2.31 by American Megatrends

[    0.000000] efi:  ACPI=0xb92c0000  ACPI 2.0=0xb92c0000  ESRT=0xb9bde018  SMBIOS=0xb9b29e18 

[    0.000000] secureboot: Secure boot could not be determined (mode 0)

[    0.000000] SMBIOS 2.8 present.

[    0.000000] DMI: Medion Akoya S6214T/Akoya S6214T, BIOS 704 06/14/2016

[    0.000000] tsc: Detected 2165.800 MHz processor

[    0.000030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000036] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000049] last_pfn = 0x140000 max_arch_pfn = 0x400000000

[    0.000055] MTRR default type: uncachable

[    0.000056] MTRR fixed ranges enabled:

[    0.000059]   00000-9FFFF write-back

[    0.000061]   A0000-FFFFF uncachable

[    0.000062] MTRR variable ranges enabled:

[    0.000065]   0 base 000000000 mask F80000000 write-back

[    0.000068]   1 base 080000000 mask FC0000000 write-back

[    0.000070]   2 base 0BA000000 mask FFE000000 uncachable

[    0.000072]   3 base 0BC000000 mask FFC000000 uncachable

[    0.000074]   4 base 100000000 mask FC0000000 write-back

[    0.000076]   5 disabled

[    0.000077]   6 disabled

[    0.000079]   7 disabled

[    0.000248] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  

[    0.000369] e820: update [mem 0xba000000-0xffffffff] usable ==> reserved

[    0.000381] last_pfn = 0xba000 max_arch_pfn = 0x400000000

[    0.006238] esrt: Reserving ESRT space from 0x00000000b9bde018 to 0x00000000b9bde050.

[    0.006252] BRK [0x116c01000, 0x116c01fff] PGTABLE

[    0.006256] BRK [0x116c02000, 0x116c02fff] PGTABLE

[    0.006259] BRK [0x116c03000, 0x116c03fff] PGTABLE

[    0.006343] BRK [0x116c04000, 0x116c04fff] PGTABLE

[    0.006348] BRK [0x116c05000, 0x116c05fff] PGTABLE

[    0.006540] BRK [0x116c06000, 0x116c06fff] PGTABLE

[    0.006600] BRK [0x116c07000, 0x116c07fff] PGTABLE

[    0.006621] BRK [0x116c08000, 0x116c08fff] PGTABLE

[    0.006680] BRK [0x116c09000, 0x116c09fff] PGTABLE

[    0.006806] BRK [0x116c0a000, 0x116c0afff] PGTABLE

[    0.006958] BRK [0x116c0b000, 0x116c0bfff] PGTABLE

[    0.007075] RAMDISK: [mem 0x30bc7000-0x345dafff]

[    0.007086] ACPI: Early table checksum verification disabled

[    0.007092] ACPI: RSDP 0x00000000B92C0000 000024 (v02 MEDION)

[    0.007099] ACPI: XSDT 0x00000000B92C0088 00008C (v01 MEDION MEDIONAG 01072009 AMI  00010013)

[    0.007109] ACPI: FACP 0x00000000B92D3B88 00010C (v05 MEDION MEDIONAG 01072009 AMI  00010013)

[    0.007118] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20180810/tbfadt-569)

[    0.007125] ACPI: DSDT 0x00000000B92C01A0 0139E5 (v02 MEDION MEDIONAG 01072009 INTL 20120913)

[    0.007132] ACPI: FACS 0x00000000B9928F80 000040

[    0.007138] ACPI: APIC 0x00000000B92D3C98 000084 (v03 MEDION MEDIONAG 01072009 AMI  00010013)

[    0.007145] ACPI: FPDT 0x00000000B92D3D20 000044 (v01 MEDION MEDIONAG 01072009 AMI  00010013)

[    0.007152] ACPI: ECDT 0x00000000B92D3D68 0000C1 (v01 MEDION MEDIONAG 00000001 OEM. 00000003)

[    0.007158] ACPI: MSDM 0x00000000B92D3E30 000055 (v03 MEDION MEDIONAG 00000000 TEST 00000000)

[    0.007165] ACPI: MCFG 0x00000000B92D3E88 00003C (v01 MEDION MEDIONAG 01072009 MSFT 00000097)

[    0.007171] ACPI: LPIT 0x00000000B92D3EC8 000104 (v01 MEDION MEDIONAG 00000003 VLV2 0100000D)

[    0.007178] ACPI: HPET 0x00000000B92D3FD0 000038 (v01 MEDION MEDIONAG 01072009 AMI. 00000005)

[    0.007185] ACPI: SSDT 0x00000000B92D4008 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)

[    0.007192] ACPI: SSDT 0x00000000B92D4770 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)

[    0.007199] ACPI: SSDT 0x00000000B92D4A00 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)

[    0.007205] ACPI: UEFI 0x00000000B92D4B80 000042 (v01 MEDION MEDIONAG 00000000      00000000)

[    0.007212] ACPI: BGRT 0x00000000B92D4BC8 000038 (v01 MEDION MEDIONAG 01072009 AMI  00010013)

[    0.007225] ACPI: Local APIC address 0xfee00000

[    0.007396] No NUMA configuration found

[    0.007398] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]

[    0.007406] NODE_DATA(0) allocated [mem 0x13fffb000-0x13fffffff]

[    0.007457] Zone ranges:

[    0.007459]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.007462]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.007464]   Normal   [mem 0x0000000100000000-0x000000013fffffff]

[    0.007467]   Device   empty

[    0.007469] Movable zone start for each node

[    0.007471] Early memory node ranges

[    0.007473]   node   0: [mem 0x0000000000001000-0x000000000008efff]

[    0.007474]   node   0: [mem 0x0000000000090000-0x000000000009dfff]

[    0.007476]   node   0: [mem 0x0000000000100000-0x000000001fffffff]

[    0.007478]   node   0: [mem 0x0000000020100000-0x00000000b928afff]

[    0.007479]   node   0: [mem 0x00000000b9c2e000-0x00000000b9c2efff]

[    0.007481]   node   0: [mem 0x00000000b9c71000-0x00000000b9dd9fff]

[    0.007482]   node   0: [mem 0x00000000b9ffa000-0x00000000b9ffffff]

[    0.007484]   node   0: [mem 0x0000000100000000-0x000000013fffffff]

[    0.007490] Reserved but unavailable: 98 pages

[    0.007494] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]

[    0.007497] On node 0 totalpages: 1020567

[    0.007499]   DMA zone: 64 pages used for memmap

[    0.007500]   DMA zone: 22 pages reserved

[    0.007502]   DMA zone: 3996 pages, LIFO batch:0

[    0.007703]   DMA32 zone: 11788 pages used for memmap

[    0.007705]   DMA32 zone: 754427 pages, LIFO batch:63

[    0.047974]   Normal zone: 4096 pages used for memmap

[    0.047977]   Normal zone: 262144 pages, LIFO batch:63

[    0.060573] x86/hpet: Will disable the HPET for this platform because it's not reliable

[    0.060582] Reserving Intel graphics memory at [mem 0xbb000000-0xbeffffff]

[    0.060674] ACPI: PM-Timer IO Port: 0x408

[    0.060678] ACPI: Local APIC address 0xfee00000

[    0.060691] ACPI: LAPIC_NMI (acpi_id[0x01] low res lint[0xf8])

[    0.060692] ACPI: NMI not connected to LINT 1!

[    0.060694] ACPI: LAPIC_NMI (acpi_id[0x02] low dfl lint[0x36])

[    0.060695] ACPI: NMI not connected to LINT 1!

[    0.060697] ACPI: LAPIC_NMI (acpi_id[0x03] low dfl lint[0x7a])

[    0.060698] ACPI: NMI not connected to LINT 1!

[    0.060700] ACPI: LAPIC_NMI (acpi_id[0x04] res level lint[0x1])

[    0.060714] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86

[    0.060718] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.060721] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.060723] ACPI: IRQ0 used by override.

[    0.060725] ACPI: IRQ9 used by override.

[    0.060729] Using ACPI (MADT) for SMP configuration information

[    0.060732] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[    0.060750] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.060791] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.060795] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]

[    0.060799] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]

[    0.060800] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]

[    0.060804] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]

[    0.060807] PM: Registered nosave memory: [mem 0xb928b000-0xb92bafff]

[    0.060809] PM: Registered nosave memory: [mem 0xb92bb000-0xb92d4fff]

[    0.060810] PM: Registered nosave memory: [mem 0xb92d5000-0xb9932fff]

[    0.060812] PM: Registered nosave memory: [mem 0xb9933000-0xb9be1fff]

[    0.060813] PM: Registered nosave memory: [mem 0xb9be2000-0xb9c2dfff]

[    0.060817] PM: Registered nosave memory: [mem 0xb9c2f000-0xb9c70fff]

[    0.060821] PM: Registered nosave memory: [mem 0xb9dda000-0xb9ff9fff]

[    0.060824] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]

[    0.060826] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]

[    0.060827] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]

[    0.060829] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]

[    0.060830] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]

[    0.060832] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]

[    0.060833] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]

[    0.060835] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]

[    0.060838] [mem 0xbf000000-0xe00f7fff] available for PCI devices

[    0.060840] Booting paravirtualized kernel on bare hardware

[    0.060846] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.266047] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0

[    0.266065] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1

[    0.266735] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288

[    0.266752] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152

[    0.266755] pcpu-alloc: [0] 0 1 2 3 

[    0.266803] Built 1 zonelists, mobility grouping on.  Total pages: 1004597

[    0.266806] Policy zone: Normal

[    0.266809] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=9115f7fa-aaf5-4499-9726-ccd0575b5434 ro quiet

[    0.284149] Calgary: detecting Calgary via BIOS EBDA area

[    0.284153] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.309296] Memory: 3818516K/4082268K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 263752K reserved, 0K cma-reserved)

[    0.309553] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.309566] Kernel/User page tables isolation: enabled

[    0.309662] ftrace: allocating 31872 entries in 125 pages

[    0.328716] rcu: Hierarchical RCU implementation.

[    0.328720] rcu:   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.

[    0.328722] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[    0.335654] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16

[    0.336030] Console: colour dummy device 80x25

[    0.336037] console [tty0] enabled

[    0.336084] ACPI: Core revision 20180810

[    0.336334] APIC: Switch to symmetric I/O mode setup

[    0.337180] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0

[    0.356343] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1f37ff50e1e, max_idle_ns: 440795224014 ns

[    0.356363] Calibrating delay loop (skipped), value calculated using timer frequency.. 4331.60 BogoMIPS (lpj=8663200)

[    0.356368] pid_max: default: 32768 minimum: 301

[    0.357494] Security Framework initialized

[    0.357496] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.357530] AppArmor: AppArmor initialized

[    0.358957] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.359705] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.359767] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.359792] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.360190] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[    0.360192] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[    0.360213] process: using mwait in idle threads

[    0.360220] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0

[    0.360221] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0

[    0.360224] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[    0.360227] Spectre V2 : Mitigation: Full generic retpoline

[    0.360228] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[    0.360229] Spectre V2 : Enabling Restricted Speculation for firmware calls

[    0.360241] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

[    0.360271] MDS: Mitigation: Clear CPU buffers

[    0.360547] Freeing SMP alternatives memory: 24K

[    0.366558] TSC deadline timer enabled

[    0.366564] smpboot: CPU0: Intel(R) Pentium(R) CPU  N3540  @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8)

[    0.366833] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.

[    0.366853] ... version:                3

[    0.366854] ... bit width:              40

[    0.366855] ... generic registers:      2

[    0.366857] ... value mask:             000000ffffffffff

[    0.366858] ... max period:             0000007fffffffff

[    0.366859] ... fixed-purpose events:   3

[    0.366860] ... event mask:             0000000700000003

[    0.366941] rcu: Hierarchical SRCU implementation.

[    0.367631] random: crng done (trusting CPU's manufacturer)

[    0.368037] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[    0.368176] smp: Bringing up secondary CPUs ...

[    0.368347] x86: Booting SMP configuration:

[    0.368347] .... node  #0, CPUs:      #1 #2 #3

[    0.372370] smp: Brought up 1 node, 4 CPUs

[    0.372378] smpboot: Max logical packages: 1

[    0.372388] smpboot: Total of 4 processors activated (17326.40 BogoMIPS)

[    0.373625] devtmpfs: initialized

[    0.373625] x86/mm: Memory block size: 128MB

[    0.373625] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)

[    0.373625] PM: Registering ACPI NVS region [mem 0xb92d5000-0xb9932fff] (6676480 bytes)

[    0.373625] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.373625] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.373625] pinctrl core: initialized pinctrl subsystem

[    0.373625] NET: Registered protocol family 16

[    0.376406] audit: initializing netlink subsys (disabled)

[    0.376422] audit: type=2000 audit(1578159907.040:1): state=initialized audit_enabled=0 res=1

[    0.376703] cpuidle: using governor ladder

[    0.376712] cpuidle: using governor menu

[    0.376770] ACPI: bus type PCI registered

[    0.376773] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.376898] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.376902] PCI: not using MMCONFIG

[    0.376904] PCI: Using configuration type 1 for base access

[    0.378167] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[    0.378167] ACPI: Added _OSI(Module Device)

[    0.378167] ACPI: Added _OSI(Processor Device)

[    0.378167] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.378167] ACPI: Added _OSI(Processor Aggregator Device)

[    0.378167] ACPI: Added _OSI(Linux-Dell-Video)

[    0.378167] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

[    0.378167] ACPI: EC: EC started

[    0.378167] ACPI: EC: interrupt blocked

[    0.378167] ACPI: \: Used as first EC

[    0.378167] ACPI: \: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.378167] ACPI: \: Used as boot ECDT EC to handle transactions

[    0.397189] ACPI: 4 ACPI AML tables successfully acquired and loaded

[    0.413335] ACPI: Dynamic OEM Table Load:

[    0.413346] ACPI: SSDT 0xFFFF965D3AAA1800 000419 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)

[    0.413989] ACPI: Dynamic OEM Table Load:

[    0.413998] ACPI: SSDT 0xFFFF965D3AAA7000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)

[    0.414906] ACPI: Dynamic OEM Table Load:

[    0.414914] ACPI: SSDT 0xFFFF965D3AB04800 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)

[    0.415337] ACPI: Dynamic OEM Table Load:

[    0.415344] ACPI: SSDT 0xFFFF965D3AAD3C00 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)

[    0.417096] ACPI: Interpreter enabled

[    0.417133] ACPI: (supports S0 S3 S4 S5)

[    0.417135] ACPI: Using IOAPIC for interrupt routing

[    0.417194] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.418041] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources

[    0.418072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.418812] ACPI: Enabled 9 GPEs in block 00 to 3F

[    0.427853] ACPI: Power Resource [USBC] (on)

[    0.430258] ACPI: Power Resource [PLPE] (on)

[    0.430663] ACPI: Power Resource [PLPE] (on)

[    0.437185] ACPI: Power Resource [CLK0] (on)

[    0.437266] ACPI: Power Resource [CLK1] (on)

[    0.519191] acpi DCK0000:00: ACPI dock station (docks/bays count: 1)

[    0.520497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.520505] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.520672] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

[    0.521418] PCI host bridge to bus 0000:00

[    0.521423] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]

[    0.521426] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]

[    0.521428] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]

[    0.521431] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.521433] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.521436] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]

[    0.521438] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]

[    0.521441] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0717ffe window]

[    0.521444] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.521455] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000

[    0.521660] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000

[    0.521674] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]

[    0.521684] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]

[    0.521694] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]

[    0.521712] pci 0000:00:02.0: BAR 2: assigned to efifb

[    0.521908] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601

[    0.521929] pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]

[    0.521938] pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]

[    0.521947] pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]

[    0.521956] pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]

[    0.521964] pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]

[    0.521973] pci 0000:00:13.0: reg 0x24: [mem 0xd0717000-0xd07177ff]

[    0.522020] pci 0000:00:13.0: PME# supported from D3hot

[    0.522192] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330

[    0.522213] pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit]

[    0.522271] pci 0000:00:14.0: PME# supported from D3hot D3cold

[    0.522446] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000

[    0.522475] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]

[    0.522488] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]

[    0.522589] pci 0000:00:1a.0: PME# supported from D0 D3hot

[    0.522765] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300

[    0.522790] pci 0000:00:1b.0: reg 0x10: [mem 0xd0710000-0xd0713fff 64bit]

[    0.522861] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.523027] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400

[    0.523095] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.523279] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100

[    0.523516] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500

[    0.523559] pci 0000:00:1f.3: reg 0x10: [mem 0xd0714000-0xd071401f]

[    0.523627] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]

[    0.524014] pci 0000:01:00.0: [8086:08b3] type 00 class 0x028000

[    0.524079] pci 0000:01:00.0: reg 0x10: [mem 0xd0600000-0xd0601fff 64bit]

[    0.524270] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold

[    0.524544] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.524550] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]

[    0.526246] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.526385] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.526513] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.526639] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.526765] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.526891] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.527017] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.527144] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.530120] ACPI: EC: interrupt unblocked

[    0.530140] ACPI: EC: event unblocked

[    0.530149] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.530152] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events

[    0.530316] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[    0.530316] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[    0.530316] pci 0000:00:02.0: vgaarb: bridge control possible

[    0.530316] vgaarb: loaded

[    0.530316] pps_core: LinuxPPS API ver. 1 registered

[    0.530316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.530316] PTP clock support registered

[    0.530316] EDAC MC: Ver: 3.0.0

[    0.530316] Registered efivars operations

[    0.532458] PCI: Using ACPI for IRQ routing

[    0.541127] PCI: pci_cache_line_size set to 64 bytes

[    0.541187] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]

[    0.541190] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]

[    0.541191] e820: reserve RAM buffer [mem 0xb928b000-0xbbffffff]

[    0.541194] e820: reserve RAM buffer [mem 0xb9c2f000-0xbbffffff]

[    0.541196] e820: reserve RAM buffer [mem 0xb9dda000-0xbbffffff]

[    0.541197] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]

[    0.541818] clocksource: Switched to clocksource tsc-early

[    0.561147] VFS: Disk quotas dquot_6.6.0

[    0.561182] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.561400] AppArmor: AppArmor Filesystem Enabled

[    0.561437] pnp: PnP ACPI init

[    0.561547] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.561749] system 00:01: [io  0x0680-0x069f] has been reserved

[    0.561753] system 00:01: [io  0x0400-0x047f] has been reserved

[    0.561756] system 00:01: [io  0x0500-0x05fe] has been reserved

[    0.561759] system 00:01: [io  0x0600-0x061f] has been reserved

[    0.561768] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.562072] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.562138] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)

[    0.562937] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved

[    0.562941] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved

[    0.562944] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved

[    0.562947] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved

[    0.562949] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved

[    0.562952] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved

[    0.562955] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved

[    0.562958] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved

[    0.562961] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved

[    0.562970] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.565280] pnp: PnP ACPI: found 5 devices

[    0.577374] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.577393] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000

[    0.577398] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000

[    0.577415] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    0.577419] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    0.577424] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]

[    0.577433] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    0.577436] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    0.577440] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.577443] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]

[    0.577448] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]

[    0.577456] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]

[    0.577458] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]

[    0.577461] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]

[    0.577463] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]

[    0.577466] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]

[    0.577468] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]

[    0.577470] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]

[    0.577473] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0717ffe window]

[    0.577476] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]

[    0.577478] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]

[    0.577659] NET: Registered protocol family 2

[    0.577974] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)

[    0.578024] TCP established hash table entries: 32768 (order: 6, 262144 bytes)

[    0.578147] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[    0.578290] TCP: Hash tables configured (established 32768 bind 32768)

[    0.578386] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[    0.578421] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[    0.578544] NET: Registered protocol family 1

[    0.578555] NET: Registered protocol family 44

[    0.578574] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.578930] PCI: CLS 64 bytes, default 64

[    0.579019] Unpacking initramfs...

[    2.038784] Freeing initrd memory: 59472K

[    2.038861] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    2.038874] software IO TLB: mapped [mem 0xb224b000-0xb624b000] (64MB)

[    2.038998] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f37ff50e1e, max_idle_ns: 440795224014 ns

[    2.039041] clocksource: Switched to clocksource tsc

[    2.040137] Initialise system trusted keyrings

[    2.040162] Key type blacklist registered

[    2.040456] workingset: timestamp_bits=40 max_order=20 bucket_order=0

[    2.043194] zbud: loaded

[    2.400330] Key type asymmetric registered

[    2.400333] Asymmetric key parser 'x509' registered

[    2.400379] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

[    2.400477] io scheduler noop registered

[    2.400478] io scheduler deadline registered

[    2.400558] io scheduler cfq registered (default)

[    2.400560] io scheduler mq-deadline registered

[    2.401300] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[    2.401330] efifb: probing for efifb

[    2.401354] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k

[    2.401357] efifb: mode is 1920x1080x32, linelength=7680, pages=1

[    2.401357] efifb: scrolling: redraw

[    2.401360] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0

[    2.413430] Console: switching to colour frame buffer device 240x67

[    2.425265] fb0: EFI VGA frame buffer device

[    2.425284] intel_idle: MWAIT substates: 0x33000020

[    2.425286] intel_idle: v0.4.1 model 0x37

[    2.425791] intel_idle: lapic_timer_reliable_states 0xffffffff

[    2.428565] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    2.449011] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    2.450158] hpet: number irqs doesn't agree with number of timers

[    2.450213] Linux agpgart interface v0.103

[    2.450288] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

[    2.450289] AMD IOMMUv2 functionality not available on this system

[    2.453287] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1

[    2.453290] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[    2.456044] serio: i8042 KBD port at 0x60,0x64 irq 1

[    2.456308] mousedev: PS/2 mouse device common for all mice

[    2.456431] rtc_cmos 00:00: RTC can wake from S4

[    2.457183] rtc_cmos 00:00: registered as rtc0

[    2.457220] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram

[    2.457239] intel_pstate: Intel P-state driver initializing

[    2.459059] ledtrig-cpu: registered to indicate activity on CPUs

[    2.463156] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    2.463880] NET: Registered protocol family 10

[    2.502562] Segment Routing with IPv6

[    2.502683] mip6: Mobile IPv6

[    2.502696] NET: Registered protocol family 17

[    2.503882] mpls_gso: MPLS GSO support

[    2.505497] mce: Using 6 MCE banks

[    2.506041] microcode: sig=0x30678, pf=0x8, revision=0x838

[    2.507090] microcode: Microcode Update Driver: v2.2.

[    2.507157] sched_clock: Marking stable (2506665742, 367382)->(2512291572, -5258448)

[    2.509738] registered taskstats version 1

[    2.509745] Loading compiled-in X.509 certificates

[    2.596582] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'

[    2.596615] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'

[    2.598130] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring

[    2.598181] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring

[    2.600141] zswap: loaded using pool lzo/zbud

[    2.602809] AppArmor: AppArmor sha1 policy hashing enabled

[    2.603780] rtc_cmos 00:00: setting system clock to 2020-01-04 17:45:09 UTC (1578159909)

[    2.614367] Freeing unused kernel image memory: 1584K

[    2.632798] Write protecting the kernel read-only data: 16384k

[    2.635721] Freeing unused kernel image memory: 2028K

[    2.637302] Freeing unused kernel image memory: 772K

[    2.658837] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    2.659427] x86/mm: Checking user space page tables

[    2.674327] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    2.674330] Run /init as init process

[    2.918673] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

[    2.918712] ACPI: Power Button [PWRB]

[    2.918813] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2

[    2.918827] ACPI: Sleep Button [SLPB]

[    2.918937] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3

[    2.918952] ACPI: Lid Switch [LID]

[    2.919040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[    2.919058] ACPI: Power Button [PWRF]

[    2.945571] hidraw: raw HID events driver (C) Jiri Kosina

[    2.950328] sdhci: Secure Digital Host Controller Interface driver

[    2.950330] sdhci: Copyright(c) Pierre Ossman

[    2.968057] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[    2.979734] thermal LNXTHERM:00: registered as thermal_zone0

[    2.979737] ACPI: Thermal Zone [THRM] (48 C)

[    2.994758] SCSI subsystem initialized

[    3.004680] mmc0: SDHCI controller on ACPI [80860F14:01] using ADMA

[    3.009109] ACPI: bus type USB registered

[    3.009158] usbcore: registered new interface driver usbfs

[    3.009178] usbcore: registered new interface driver hub

[    3.009226] usbcore: registered new device driver usb

[    3.020182] libata version 3.00 loaded.

[    3.030724] ahci 0000:00:13.0: version 3.0

[    3.030931] ahci 0000:00:13.0: controller can't do DEVSLP, turning off

[    3.039008] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    3.039022] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1

[    3.040264] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810

[    3.040271] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[    3.040751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[    3.040755] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.040757] usb usb1: Product: xHCI Host Controller

[    3.040759] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd

[    3.040761] usb usb1: SerialNumber: 0000:00:14.0

[    3.041205] hub 1-0:1.0: USB hub found

[    3.041223] hub 1-0:1.0: 6 ports detected

[    3.041460] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 1.5 Gbps 0x2 impl SATA mode

[    3.041465] ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part deso 

[    3.042848] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    3.042857] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2

[    3.042864] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed

[    3.043144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

[    3.043147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.043149] usb usb2: Product: xHCI Host Controller

[    3.043151] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd

[    3.043154] usb usb2: SerialNumber: 0000:00:14.0

[    3.043382] hub 2-0:1.0: USB hub found

[    3.043397] hub 2-0:1.0: 1 port detected

[    3.045425] scsi host0: ahci

[    3.046887] scsi host1: ahci

[    3.047051] ata1: DUMMY

[    3.047055] ata2: SATA max UDMA/133 abar m2048@0xd0717000 port 0xd0717180 irq 87

[    3.103093] mmc0: new HS200 MMC card at address 0001

[    3.110866] mmcblk0: mmc0:0001 HCG8e 58.3 GiB 

[    3.111259] mmcblk0boot0: mmc0:0001 HCG8e partition 1 4.00 MiB

[    3.111660] mmcblk0boot1: mmc0:0001 HCG8e partition 2 4.00 MiB

[    3.112020] mmcblk0rpmb: mmc0:0001 HCG8e partition 3 4.00 MiB, chardev (244:0)

[    3.119740]  mmcblk0: p1 p2

[    3.220859] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)

[    3.220862] fb: switching to inteldrmfb from EFI VGA

[    3.220900] Console: switching to colour dummy device 80x25

[    3.221055] [drm] Replacing VGA console driver

[    3.221165] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    3.221166] [drm] Driver supports precise vblank timestamp query.

[    3.221767] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    3.310012] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0

[    3.311369] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[    3.311850] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5

[    3.364188] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    3.365756] ata2.00: ATA-10: WDC WD5000LPCX-22VHAT1, 02.01A02, max UDMA/133

[    3.365764] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA

[    3.367799] ata2.00: configured for UDMA/133

[    3.368570] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000LPCX-2 1A02 PQ: 0 ANSI: 5

[    3.376785] usb 1-2: new high-speed USB device number 2 using xhci_hcd

[    3.434488] fbcon: inteldrmfb (fb0) is primary device

[    3.657846] usb 1-2: New USB device found, idVendor=04f2, idProduct=b3a3, bcdDevice=54.66

[    3.657858] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2

[    3.657867] usb 1-2: Product: USB2.0 HD UVC WebCam

[    3.657875] usb 1-2: Manufacturer: Chicony Electronics Co.,Ltd.

[    3.657883] usb 1-2: SerialNumber: 0x0001

[    3.796800] usb 1-3: new high-speed USB device number 3 using xhci_hcd

[    3.947636] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32

[    3.947648] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[    3.947656] usb 1-3: Product: USB2.0 Hub

[    3.950887] hub 1-3:1.0: USB hub found

[    3.951261] hub 1-3:1.0: 4 ports detected

[    3.952442] usb: port power management may be unreliable

[    4.084839] usb 1-4: new high-speed USB device number 4 using xhci_hcd

[    4.235940] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32

[    4.235952] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[    4.235961] usb 1-4: Product: USB2.0 Hub

[    4.237893] hub 1-4:1.0: USB hub found

[    4.238255] hub 1-4:1.0: 4 ports detected

[    4.316835] usb 1-3.1: new full-speed USB device number 5 using xhci_hcd

[    4.420584] usb 1-3.1: New USB device found, idVendor=0d62, idProduct=02b0, bcdDevice= 2.27

[    4.420604] usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    4.445110] usbcore: registered new interface driver usbhid

[    4.445112] usbhid: USB HID core driver

[    4.450363] input: HID 0d62:02b0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:0D62:02B0.0001/input/input6

[    4.508795] usb 1-3.3: new low-speed USB device number 6 using xhci_hcd

[    4.510105] hid-generic 0003:0D62:02B0.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0d62:02b0] on usb-0000:00:14.0-3.1/input0

[    4.511647] input: HID 0d62:02b0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:0D62:02B0.0002/input/input7

[    4.512254] input: HID 0d62:02b0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:0D62:02B0.0002/input/input8

[    4.569339] input: HID 0d62:02b0 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:0D62:02B0.0002/input/input9

[    4.569583] input: HID 0d62:02b0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:0D62:02B0.0002/input/input10

[    4.570325] hid-generic 0003:0D62:02B0.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [HID 0d62:02b0] on usb-0000:00:14.0-3.1/input1

[    4.620294] usb 1-3.3: New USB device found, idVendor=1bcf, idProduct=0007, bcdDevice= 0.14

[    4.620299] usb 1-3.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[    4.620302] usb 1-3.3: Product: USB Optical Mouse

[    4.633131] input: USB Optical Mouse Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:1BCF:0007.0003/input/input11

[    4.633945] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:1BCF:0007.0003/input/input12

[    4.634958] hid-generic 0003:1BCF:0007.0003: input,hiddev1,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3.3/input0

[    4.685096] Console: switching to colour frame buffer device 240x67

[    4.696788] usb 1-4.1: new high-speed USB device number 7 using xhci_hcd

[    4.721941] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[    4.751774] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)

[    4.751779] sd 1:0:0:0: [sda] 4096-byte physical blocks

[    4.751795] sd 1:0:0:0: [sda] Write Protect is off

[    4.751798] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    4.751821] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    4.799028] usb 1-4.1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60

[    4.799042] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    4.799052] usb 1-4.1: Product: USB2.0-CRW

[    4.799067] usb 1-4.1: Manufacturer: Generic

[    4.799073] usb 1-4.1: SerialNumber: 20100201396000000

[    4.815711] usbcore: registered new interface driver rtsx_usb

[    4.881024] usb 1-4.2: new full-speed USB device number 8 using xhci_hcd

[    4.984077] usb 1-4.2: New USB device found, idVendor=0eef, idProduct=c034, bcdDevice=83.00

[    4.984089] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    4.984096] usb 1-4.2: Product: eGalaxTouch EXC3000-0183-22.00.00

[    4.984103] usb 1-4.2: Manufacturer: eGalax Inc.

[    4.994390] input: eGalax Inc. eGalaxTouch EXC3000-0183-22.00.00 Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:0EEF:C034.0004/input/input13

[    4.995929] hid-generic 0003:0EEF:C034.0004: input,hiddev2,hidraw3: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC3000-0183-22.00.00] on usb-0000:00:14.0-4.2/input0

[    5.076816] usb 1-4.3: new full-speed USB device number 9 using xhci_hcd

[    5.152955]  sda: sda1 sda4

[    5.155954] sd 1:0:0:0: [sda] Attached SCSI disk

[    5.182509] usb 1-4.3: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01

[    5.182518] usb 1-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    5.272517] usb 1-4.4: new full-speed USB device number 10 using xhci_hcd

[    5.387971] usb 1-4.4: New USB device found, idVendor=048d, idProduct=8350, bcdDevice=10.14

[    5.387993] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    5.387997] usb 1-4.4: Product: ITE Device(8350)

[    5.388001] usb 1-4.4: Manufacturer: ITE Tech. Inc.

[    5.446529] hid-generic 0003:048D:8350.0005: hiddev3,hidraw4: USB HID v1.10 Device [ITE Tech. Inc. ITE Device(8350)] on usb-0000:00:14.0-4.4/input0

[    5.636371] raid6: sse2x1   gen()  1096 MB/s

[    5.704361] raid6: sse2x1   xor()  2187 MB/s

[    5.772373] raid6: sse2x2   gen()  1888 MB/s

[    5.840364] raid6: sse2x2   xor()  2593 MB/s

[    5.908358] raid6: sse2x4   gen()  2934 MB/s

[    5.976362] raid6: sse2x4   xor()  2430 MB/s

[    5.976364] raid6: using algorithm sse2x4 gen() 2934 MB/s

[    5.976365] raid6: .... xor() 2430 MB/s, rmw enabled

[    5.976366] raid6: using ssse3x2 recovery algorithm

[    6.000156] xor: measuring software checksum speed

[    6.036354]    prefetch64-sse:  6677.000 MB/sec

[    6.076353]    generic_sse:  6064.000 MB/sec

[    6.076355] xor: using function: prefetch64-sse (6677.000 MB/sec)

[    6.208721] Btrfs loaded, crc32c=crc32c-intel

[    6.497218] PM: Image not found (code -22)

[    6.661151] cryptd: max_cpu_qlen set to 1000

[    6.869307] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[    7.404471] systemd[1]: Inserted module 'autofs4'

[    7.492064] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)

[    7.517221] systemd[1]: Detected architecture x86-64.

[    7.544389] systemd[1]: Set hostname to <ordinosaure>.

[    7.545234] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument

[    7.820632] systemd[1]: Listening on initctl Compatibility Named Pipe.

[    7.821148] systemd[1]: Listening on udev Control Socket.

[    7.821216] systemd[1]: Reached target Remote File Systems.

[    7.828501] systemd[1]: Created slice User and Session Slice.

[    7.828542] systemd[1]: Reached target Slices.

[    7.829000] systemd[1]: Listening on fsck to fsckd communication Socket.

[    7.899797] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro

[    7.911533] lp: driver loaded but no devices found

[    7.926025] ppdev: user-space parallel port driver

[    8.077821] systemd-journald[215]: Received request to flush runtime journal from PID 1

[    8.311798] input: Intel Virtual Button driver as /devices/platform/INT33D6:00/input/input15

[    8.362454] ACPI: AC Adapter [AC0] (on-line)

[    8.374919] battery: ACPI: Battery Slot [BAT0] (battery present)

[    8.387706] battery: ACPI: Battery Slot [BAT1] (battery present)

[    8.437983] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)

[    8.469434] input: PC Speaker as /devices/platform/pcspkr/input/input16

[    8.469876] iTCO_vendor_support: vendor-support=0

[    8.481380] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[    8.481474] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)

[    8.482284] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    8.501282] EFI Variables Facility v0.08 2004-May-17

[    8.566337] pstore: Using compression: deflate

[    8.566356] pstore: Registered efi as persistent store backend

[    8.572941] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[    8.603785] sd 1:0:0:0: Attached scsi generic sg0 type 0

[    8.677226] Bluetooth: Core ver 2.22

[    8.677258] NET: Registered protocol family 31

[    8.677260] Bluetooth: HCI device and connection manager initialized

[    8.677266] Bluetooth: HCI socket layer initialized

[    8.677270] Bluetooth: L2CAP socket layer initialized

[    8.677282] Bluetooth: SCO socket layer initialized

[    8.706536] Intel(R) Wireless WiFi driver for Linux

[    8.706539] Copyright(c) 2003- 2015 Intel Corporation

[    8.706650] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)

[    8.735945] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[    8.735950] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[    8.735953] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)

[    8.735954] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[    8.735956] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[    8.735959] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18

[    8.735961] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12

[    8.738513] pci_bus 0000:01: Allocating resources

[    8.738546] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000

[    8.738565] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    8.738568] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    8.738576] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    8.738579] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    8.738886] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-3160-17.ucode

[    8.739644] iwlwifi 0000:01:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm

[    8.743531] pci_bus 0000:01: Allocating resources

[    8.743582] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000

[    8.743600] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    8.743604] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    8.743611] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    8.743614] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    8.862584] Bluetooth: HCI UART driver ver 2.3

[    8.862587] Bluetooth: HCI UART protocol H4 registered

[    8.862588] Bluetooth: HCI UART protocol BCSP registered

[    8.862617] Bluetooth: HCI UART protocol LL registered

[    8.862618] Bluetooth: HCI UART protocol ATH3K registered

[    8.862639] Bluetooth: HCI UART protocol Three-wire (H5) registered

[    8.862699] Bluetooth: HCI UART protocol Intel registered

[    8.862779] Bluetooth: HCI UART protocol Broadcom registered

[    8.862799] Bluetooth: HCI UART protocol QCA registered

[    8.862800] Bluetooth: HCI UART protocol AG6XX registered

[    8.862801] Bluetooth: HCI UART protocol Marvell registered

[    8.967419] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17

[    8.967543] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18

[    8.967656] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19

[    9.145689] intel_rapl: Found RAPL domain package

[    9.145693] intel_rapl: Found RAPL domain core

[    9.150227] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164

[    9.172760] iwlwifi 0000:01:00.0: base HW address: 30:3a:64:80:cb:e0

[    9.311789] Adding 6837244k swap on /dev/sda1.  Priority:-2 extents:1 across:6837244k FS

[    9.315441] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'

[    9.335529] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0

[    9.736484] media: Linux media interface: v0.10

[    9.766598] videodev: Linux video capture interface: v2.00

[    9.912139] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)

[    9.923929] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b3a3)

[    9.937833] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!

[    9.937840] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!

[    9.937843] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!

[    9.938013] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input20

[    9.938172] usbcore: registered new interface driver uvcvideo

[    9.938174] USB Video Class driver (1.1.1)

[   10.030218] audit: type=1400 audit(1578159916.923:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=649 comm="apparmor_parser"

[   10.031047] audit: type=1400 audit(1578159916.923:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=646 comm="apparmor_parser"

[   10.031056] audit: type=1400 audit(1578159916.923:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=646 comm="apparmor_parser"

[   10.031061] audit: type=1400 audit(1578159916.923:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=646 comm="apparmor_parser"

[   10.035511] audit: type=1400 audit(1578159916.927:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=650 comm="apparmor_parser"

[   10.035521] audit: type=1400 audit(1578159916.927:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=650 comm="apparmor_parser"

[   10.039240] audit: type=1400 audit(1578159916.931:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=653 comm="apparmor_parser"

[   10.042041] audit: type=1400 audit(1578159916.935:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=648 comm="apparmor_parser"

[   10.042051] audit: type=1400 audit(1578159916.935:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=648 comm="apparmor_parser"

[   10.042056] audit: type=1400 audit(1578159916.935:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=648 comm="apparmor_parser"

[   10.353145] usbcore: registered new interface driver btusb

[   10.401042] Bluetooth: hci0: read Intel version: 370710010002030d00

[   10.403080] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq

[   10.403088] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq

[   10.414310] input: eGalax Inc. eGalaxTouch EXC3000-0183-22.00.00 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:0EEF:C034.0004/input/input21

[   10.414642] hid-multitouch 0003:0EEF:C034.0004: input,hiddev2,hidraw3: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC3000-0183-22.00.00] on usb-0000:00:14.0-4.2/input0

[   10.547945] Bluetooth: hci0: unexpected event for opcode 0xfc2f

[   10.563980] Bluetooth: hci0: Intel firmware patch completed and activated

[   10.642501] pci_bus 0000:01: Allocating resources

[   10.642531] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000

[   10.642547] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[   10.642550] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[   10.642559] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[   10.642561] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[   10.655281] pci_bus 0000:01: Allocating resources

[   10.655311] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000

[   10.655326] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[   10.655329] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[   10.655337] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[   10.655340] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[   10.800131] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   10.800134] Bluetooth: BNEP filters: protocol multicast

[   10.800141] Bluetooth: BNEP socket layer initialized

[   11.218624] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   11.368697] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   11.547395] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   11.689140] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   14.989327] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   18.335203] wlp1s0: authenticate with 90:4d:4a:c2:5f:b6

[   18.339492] wlp1s0: send auth to 90:4d:4a:c2:5f:b6 (try 1/3)

[   18.341933] wlp1s0: authenticated

[   18.344404] wlp1s0: associate with 90:4d:4a:c2:5f:b6 (try 1/3)

[   18.348467] wlp1s0: RX AssocResp from 90:4d:4a:c2:5f:b6 (capab=0x1411 status=0 aid=5)

[   18.354732] wlp1s0: associated

[   18.786445] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready

[   21.938475] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=2a02:a03f:4657:8a00:0c0b:f9ff:8288:0f9a DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=156502 PROTO=UDP SPT=8612 DPT=8612 LEN=24 

[   21.938529] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=2a02:a03f:4657:8a00:0c0b:f9ff:8288:0f9a DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=482953 PROTO=UDP SPT=8612 DPT=8610 LEN=24 

[   21.938575] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=2a02:a03f:4657:8a00:323a:64ff:fe80:cbe0 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=621615 PROTO=UDP SPT=8612 DPT=8612 LEN=24 

[   21.938621] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=2a02:a03f:4657:8a00:323a:64ff:fe80:cbe0 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=624991 PROTO=UDP SPT=8612 DPT=8610 LEN=24 

[   21.938668] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:323a:64ff:fe80:cbe0 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=213382 PROTO=UDP SPT=8612 DPT=8612 LEN=24 

[   21.938715] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:323a:64ff:fe80:cbe0 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=190618 PROTO=UDP SPT=8612 DPT=8610 LEN=24 

[   21.949026] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=2a02:a03f:4657:8a00:0c0b:f9ff:8288:0f9a DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=156502 PROTO=UDP SPT=8612 DPT=8612 LEN=24 

[   21.949076] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=2a02:a03f:4657:8a00:0c0b:f9ff:8288:0f9a DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=482953 PROTO=UDP SPT=8612 DPT=8610 LEN=24 

[   21.949122] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=2a02:a03f:4657:8a00:323a:64ff:fe80:cbe0 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=621615 PROTO=UDP SPT=8612 DPT=8612 LEN=24 

[   21.949167] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=2a02:a03f:4657:8a00:323a:64ff:fe80:cbe0 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=624991 PROTO=UDP SPT=8612 DPT=8610 LEN=24 

[   23.894899] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=8151 PROTO=2 

[   32.320946] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[   32.905242] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15561 PROTO=2 

[  120.600251] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  157.298487] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  158.060895] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=63494 PROTO=2 

[  165.493883] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.

[  240.787559] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  282.378335] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  319.463220] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15124 PROTO=2 

[  360.950148] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  407.459071] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  532.537871] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  597.869903] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=56084 PROTO=2 

[  601.275587] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  657.619204] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  721.541600] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  782.595675] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  794.526985] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=48094 DF PROTO=UDP SPT=42109 DPT=50001 LEN=63 

[  794.527147] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=48095 DF PROTO=UDP SPT=33867 DPT=50002 LEN=63 

[  794.527252] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=48096 DF PROTO=UDP SPT=42897 DPT=50003 LEN=63 

[  794.527493] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=70 TOS=0x00 PREC=0x00 TTL=1 ID=48097 DF PROTO=UDP SPT=58675 DPT=50001 LEN=50 

[  794.527596] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=70 TOS=0x00 PREC=0x00 TTL=1 ID=48098 DF PROTO=UDP SPT=48991 DPT=50002 LEN=50 

[  794.527690] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=70 TOS=0x00 PREC=0x00 TTL=1 ID=48099 DF PROTO=UDP SPT=46198 DPT=50003 LEN=50 

[  795.530061] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=48312 DF PROTO=UDP SPT=42947 DPT=50001 LEN=63 

[  795.530202] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=48313 DF PROTO=UDP SPT=50108 DPT=50002 LEN=63 

[  795.530288] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=48314 DF PROTO=UDP SPT=39197 DPT=50003 LEN=63 

[  803.558159] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=49400 DF PROTO=UDP SPT=54444 DPT=50001 LEN=63 

[  841.601869] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  907.676058] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[  926.445921] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=1184 PROTO=2 

[  946.972086] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=37654 PROTO=2 

[  961.764838] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1031.857967] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=43911 PROTO=2 

[ 1032.756144] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1032.858969] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=36942 PROTO=2 

[ 1081.927598] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1157.836055] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1158.024865] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=64789 PROTO=2 

[ 1202.090357] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1238.560027] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=45368 PROTO=2 

[ 1282.916090] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1283.619196] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=55406 PROTO=2 

[ 1305.275609] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=47917 PROTO=2 

[ 1322.253169] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1407.893518] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1408.415692] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=65472 PROTO=2 

[ 1408.992348] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=18263 DF PROTO=UDP SPT=60246 DPT=50001 LEN=63 

[ 1408.992780] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=18264 DF PROTO=UDP SPT=43610 DPT=50002 LEN=63 

[ 1408.992949] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.39 DST=239.255.102.18 LEN=83 TOS=0x00 PREC=0x00 TTL=1 ID=18265 DF PROTO=UDP SPT=53283 DPT=50003 LEN=63 

[ 1442.313733] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1459.006899] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=25933 PROTO=2 

[ 1532.973495] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1562.476070] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1601.846193] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=48251 PROTO=2 

[ 1658.053519] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1658.921746] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15504 PROTO=2 

[ 1682.639193] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1783.133498] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1802.699400] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1908.213429] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 1922.862472] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 2033.190738] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 2043.127416] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

[ 2066.403206] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=45557 PROTO=2

raleur · 05-01-2020 00:03:18

nam1962 a écrit :

il y a trois bootloaders

efibootmgr n'en affiche que deux. Quel est le troisième ?
On peut voir la sortie détaillée avec l'option -v ?

nam1962 a écrit :

seul l'UEFI OS est opérationnel

C'est-à-dire ? Que se passe-t-il avec l'autre (debian) ?

nam1962 a écrit :

mais ils tournent et je suis obligé de repasser une fois sur deux par le Bios.

C'est-à-dire ?

nam1962 a écrit :

Comment ne garder que le bon ? (Exemple là : debian est repassé en premier)

Tu veux dire que le BootOrder change ?

nam1962 · 05-01-2020 06:59:02

raleur a écrit :

efibootmgr n'en affiche que deux. Quel est le troisième ?

On peut voir la sortie détaillée avec l'option -v ?

C'est assez hallucinant : hier matin trois, hier soir il n'y en avait plus que deux, ce matin :

:~$ efibootmgr -v

BootCurrent: 0002

Timeout: 6 seconds

BootOrder: 0001,0002,0000

Boot0000* debian  HD(1,GPT,c37e9a35-d870-4951-b8dc-8806ffd150ca,0x800,0x7d000)/File(\EFI\DEBIAN\SHIMX64.EFI)

Boot0001* debian  HD(1,GPT,c37e9a35-d870-4951-b8dc-8806ffd150ca,0x800,0x7d000)/File(\EFI\debian\shimx64.efi)

Boot0002* UEFI OS HD(1,GPT,c37e9a35-d870-4951-b8dc-8806ffd150ca,0x800,0x7d000)/File(\EFI\BOOT\BOOTX64.EFI)

A propos, le bon est le 0002, donc ça a changé depuis le boot ! et je ne vois pas le 0000 (avec ses majuscules) dans tree :

root@ordinosaure:/boot/efi# tree

.

├── chroot

└── EFI

    ├── BOOT

    │   ├── BOOTX64.CSV

    │   ├── BOOTX64.EFI

    │   ├── fbx64.efi

    │   ├── grub.cfg

    │   ├── grubx64.efi

    │   └── mmx64.efi

    └── debian

        ├── BOOTX64.CSV

        ├── fbx64.efi

        ├── grub.cfg

        ├── grubx64.efi

        ├── mmx64.efi

        └── shimx64.efi

4 directories, 12 files

Un nettoyage semble désirable, mais n'y connaissant rien dans le domain, j'attends des instructions !

raleur a écrit :

C'est-à-dire ? Que se passe-t-il avec l'autre (debian) ?

Je reste bloqué sur "chargement du disque mémoire initial"

raleur a écrit :

C'est-à-dire ?
Tu veux dire que le BootOrder change ?

Oui ! cf première réponse

Edit : après avoir redémarré, je me rends compte qu'un message apparaît (parfois, pas toujours) très brièvement au milieu de l'écran jusque après l'écran "Medion" préboot, la seule chose que je puisse en lire est "system bootorder..."

Dernière modification par nam1962 (05-01-2020 14:22:16)

raleur · 05-01-2020 15:29:33

Le système de fichiers FAT n'est pas sensible à la casse, donc peu importent les majuscules ou minuscules. Le contenu de EFI/debian et EFI/boot devrait être identique, seul le fichier shimx64.efi est renommé bootx64.efi. Donc je ne vois pas pourquoi le résultat serait différent.

Mais si seule l'entrée 0002 fonctionne, tu peux supprimer les deux autres ou les enlever du BootOrder.

nam1962 · 05-01-2020 15:57:22

Arghhh,
je viens de le faire en supprimant le répertoire debian dans /boot/efi/EFI et en passant

sudo efibootmgr -b 0000 -B

Résultat : plus de boot du tout, ca boucle sur le message (que j'ai enfin pu lire)

System BootOrder not found. Initializing defaults.

Reset System

Dois-je encore réinstaller ?

raleur · 05-01-2020 16:19:51

Et dans le menu et les options de boot UEFI ?

nam1962 · 05-01-2020 16:23:25

Plus que le choix d 'UEFI (0002) et après F10 ça boucle tout pareil

[Edit] Pour voir le Bios merdique que met Medion sur ses bouses :

[Edit] j'ai réussi à remettre l'entrée de Debian en chrootant puis :

sudo apt install grub-efi

sudo grub-install /dev/mmcblk0 --target=x86_64-efi --efi-directory=/boot/efi/

Mais j'en suis donc au même point.

Dernière modification par nam1962 (05-01-2020 17:12:54)

Debian-facile

#1 01-01-2020 10:05:09

Impossible de booter sur Debian

#2 01-01-2020 10:17:25

Re : Impossible de booter sur Debian

#3 01-01-2020 12:24:02

Re : Impossible de booter sur Debian

#4 01-01-2020 17:24:53

Re : Impossible de booter sur Debian

#5 01-01-2020 18:46:35

Re : Impossible de booter sur Debian

#6 01-01-2020 18:56:18

Re : Impossible de booter sur Debian

#7 01-01-2020 19:42:00

Re : Impossible de booter sur Debian

#8 01-01-2020 20:06:15

Re : Impossible de booter sur Debian

#9 01-01-2020 20:34:04

Re : Impossible de booter sur Debian

#10 01-01-2020 21:03:30

Re : Impossible de booter sur Debian

#11 02-01-2020 09:48:41

Re : Impossible de booter sur Debian

#12 02-01-2020 15:04:44

Re : Impossible de booter sur Debian

#13 03-01-2020 13:35:58

Re : Impossible de booter sur Debian

#14 03-01-2020 14:28:52

Re : Impossible de booter sur Debian

#15 03-01-2020 15:04:02

Re : Impossible de booter sur Debian

#16 03-01-2020 17:42:04

Re : Impossible de booter sur Debian

#17 03-01-2020 18:05:55

Re : Impossible de booter sur Debian

#18 04-01-2020 15:52:46

Re : Impossible de booter sur Debian

#19 04-01-2020 19:23:38

Re : Impossible de booter sur Debian

#20 05-01-2020 00:03:18

Re : Impossible de booter sur Debian

#21 05-01-2020 06:59:02

Re : Impossible de booter sur Debian

#22 05-01-2020 15:29:33

Re : Impossible de booter sur Debian

#23 05-01-2020 15:57:22

Re : Impossible de booter sur Debian

#24 05-01-2020 16:19:51

Re : Impossible de booter sur Debian

#25 05-01-2020 16:23:25

Re : Impossible de booter sur Debian

Pied de page des forums