bon j'ai réussi à lancer voyager .
maintenant , ma clé lance :
debian buster 32/64
emmabuntus 32/64
voyager 32/64
ubuntu 18.04.3 lts desktop/server (x64)
ubuntu 19.10 desktop/server (x64)
clonezilla testing edition (2.6.5-16)
je voudrai aussi lancer en plus :
super grub disk . (
https://www.supergrubdisk.org/)
system rescue cd (avira antivir autonome) (
https://www.commentcamarche.net/downloa … system-iso)
mais je n'y arrive pas .
un coup de main ?
merci .
dans le meilleur des cas , j'obtiens :
invalid magic number .
you need to load the kernel first .
(de mémoire)
mon grub.cfg :
#-----------------------------------
# DO NOT EDIT THIS FILE or use UTF8
# grub.cfg
#-----------------------------------
set timeout=20
set default=0
# décoration
set menu_color_normal=cyan/blue
set menu_color_highlight=white/yellow
#
# les .iso sont dans le dossier /ISO
# config FR les paramètres
set param='config lang=fr_FR.UTF-8 locales=fr_FR.UTF-8 bootkbd=fr keyboard-layouts=fr keyboard-model=pc105 timezone=Europe/Paris utc=yes'
################
# menus buster #
################
menuentry "DVD d'installation Debian Buster i386 (mode normal)" {
set isofile='/iso/debian-10.2.0-i386-DVD-1.iso'
loopback loop $isofile
echo " Buster 32 bits "
linux (loop)/install.386/vmlinuz priority=low
# initrd (loop)/install.386/initrd.gz
initrd '/initrd-i386.gz'
}
menuentry "DVD d'installation Debian Buster amd64 (mode normal)" {
set isofile='/iso/debian-10.2.0-amd64-DVD-1.iso'
loopback loop $isofile
echo " Buster 64 bits "
linux (loop)/install.amd/vmlinuz priority=low
# initrd (loop)/install.amd/initrd.gz
initrd '/initrd-amd64.gz'
}
####################
# menus emmabuntus #
####################
menuentry "DVD d'installation Emmabuntus DE 3 i386 (mode normal)" {
set isofile='/iso/emmabuntus-de3-i686-buster-1.00.iso'
loopback loop $isofile
echo " Emmabuntus DE 3 i386 "
linux (loop)/live/vmlinuz priority=low
# initrd (loop)/live/initrd.img
initrd '/install.386.gz'
}
menuentry "DVD d'installation Emmabuntus DE 3 amd64 (mode normal)" {
set isofile='/iso/emmabuntus-de3-amd64-buster-1.00.iso'
loopback loop $isofile
echo " Emmabuntus DE 3 X86-64 "
linux (loop)/live/vmlinuz priority=low
# initrd (loop)/live/initrd.img
initrd '/install.amd.gz'
}
####################
# entrées voyager #
####################
menuentry "DVD d'installation Voyager Debian i386 (mode normal)" {
set isofile='/iso/Voyager-10.1-Debian-i386.iso'
loopback loop $isofile
linux (loop)/live/vmlinuz-4.19.0-6-686 priority=medium
initrd '/install.386.gz'
}
menuentry "DVD d'installation Voyager Debian amd64 (mode normal)" {
set isofile='/iso/Voyager-10.1-Debian-amd64.iso'
loopback loop $isofile
linux (loop)/live/vmlinuz-4.19.0-6-amd64 priority=medium
initrd '/install.amd.gz'
}
############################
# menus ubuntu 18.04.3 lts #
############################
menuentry "Disque ubuntu-18.04.3-desktop-amd64" {
set isofile='/iso/ubuntu-18.04.3-desktop-amd64.iso'
# montage du fichier iso dans (loop)/
loopback loop $isofile
echo "Ubuntu gnome 18.04.3 lts desktop "
# linux (loop)/casper/vmlinuz locale=fr_FR bootkbd=fr console-setup/layoutcode=fr iso-scan/filename=$isofile boot=casper
linux (loop)/casper/vmlinuz locale=fr_FR boot=casper iso-scan/filename=$isofile $param
initrd (loop)/casper/initrd
}
menuentry "Disque ubuntu-18.04.3-live-server-amd64" {
set isofile='/iso/ubuntu-18.04.3-live-server-amd64.iso'
# montage du fichier iso dans (loop)/
loopback loop $isofile
echo "Ubuntu gnome 18.04.3 lts server "
# linux (loop)/casper/vmlinuz locale=fr_FR bootkbd=fr console-setup/layoutcode=fr iso-scan/filename=$isofile boot=casper
linux (loop)/casper/vmlinuz locale=fr_FR boot=casper iso-scan/filename=$isofile $param
initrd (loop)/casper/initrd
}
######################
# menus ubuntu 19.10 #
######################
menuentry "Disque ubuntu-19.10-desktop-amd64" {
set isofile='/iso/ubuntu-19.10-desktop-amd64.iso'
# montage du fichier iso dans (loop)/
loopback loop $isofile
echo "Ubuntu gnome 19.10 desktop "
# linux (loop)/casper/vmlinuz locale=fr_FR bootkbd=fr console-setup/layoutcode=fr iso-scan/filename=$isofile boot=casper
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile $param
initrd (loop)/casper/initrd
}
menuentry "Disque ubuntu-19.10-live-server-amd64" {
set isofile='/iso/ubuntu-19.10-live-server-amd64.iso'
# montage du fichier iso dans (loop)/
loopback loop $isofile
echo " Ubuntu gnome 19.10 server "
# linux (loop)/casper/vmlinuz locale=fr_FR bootkbd=fr console-setup/layoutcode=fr iso-scan/filename=$isofile boot=casper
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile $param
initrd (loop)/casper/initrd
}
################################################
# clonezilla #
################## exemple #####################
## Version FR et clavier FR + toram=filesystem.squashfs Monté en mémoire
## https://clonezilla.org/downloads/download.php?branch=alternative Clonezilla live version: 20191024-eoan
menuentry " Ma Live clonezilla-live-testing-2.6.5-16-amd64 " {
set isofile="/iso/clonezilla-live-2.6.5-16-amd64.iso"
loopback loop $isofile
echo "clonezilla-live-2.6.5-16-AMD64"
## config FR
## ajout locales= --> locales=fr_FR.UTF-8 + lang=fr_FR.UTF -8
## ajout keyboard-layouts= --> bootkbd=fr keyboard-layouts=fr keyboard-model=pc105
linux (loop)/live/vmlinuz boot=live config quiet components noswap edd=on nomodeset locales=fr_FR.UTF-8 lang=fr_FR.UTF-8 bootkbd=fr keyboard-layouts=fr keyboard-model=pc105 ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch="no" GRUB_GFXMODE=1024x768 ip=frommedia nosplash toram=filesystem.squashfs findiso=$isofile
initrd (loop)/live/initrd.img
}
################################################
# rescue - system
# menus ubuntu live custom antivirus
menuentry "ubuntu live custom antivirus avira " {
set isofile='/iso/rescue-system.iso'
# montage du fichier iso dans (loop)/
loopback loop $isofile
echo " antivirus autonome avira "
## config FR
## ajout locales= --> locales=fr_FR.UTF-8 + lang=fr_FR.UTF -8
## ajout keyboard-layouts= --> bootkbd=fr keyboard-layouts=fr keyboard-model=pc105
linux (loop)/casper/vmlinuz boot=casper config quiet components noswap edd=on nomodeset locales=fr_FR.UTF-8 lang=fr_FR.UTF-8 bootkbd=fr keyboard-layouts=fr keyboard-model=pc105 ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch="no" GRUB_GFXMODE=1024x768 ip=frommedia nosplash toram=filesystem.squashfs findiso=$isofile
# linux (loop)/casper/vmlinuz locale=fr_FR boot=casper iso-scan/filename=$isofile $param
initrd (loop)/casper/initrd.lz
}
## Version FR et clavier FR + toram=filesystem.squashfs Monté en mémoire
## https://clonezilla.org/downloads/download.php?branch=alternative Clonezilla live version: 20191024-eoan
menuentry "antivirus avira antivir autonome " {
set isofile="/iso/rescue-system.iso"
loopback loop $isofile
echo "antivirus autonome avira antivir (base ubuntu) "
## config FR
## ajout locales= --> locales=fr_FR.UTF-8 + lang=fr_FR.UTF -8
## ajout keyboard-layouts= --> bootkbd=fr keyboard-layouts=fr keyboard-model=pc105
linux (loop)/casper/vmlinuz boot=casper config quiet components noswap edd=on nomodeset locales=fr_FR.UTF-8 lang=fr_FR.UTF-8 bootkbd=fr keyboard-layouts=fr keyboard-model=pc105 ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch="no" GRUB_GFXMODE=1024x768 ip=frommedia nosplash toram=filesystem.squashfs findiso=$isofile
initrd (loop)/casper/initrd.img
}
la partie qui me pose problème :
# rescue - system
# menus ubuntu live custom antivirus
menuentry "ubuntu live custom antivirus avira " {
set isofile='/iso/rescue-system.iso'
# montage du fichier iso dans (loop)/
loopback loop $isofile
echo " antivirus autonome avira "
## config FR
## ajout locales= --> locales=fr_FR.UTF-8 + lang=fr_FR.UTF -8
## ajout keyboard-layouts= --> bootkbd=fr keyboard-layouts=fr keyboard-model=pc105
linux (loop)/casper/vmlinuz boot=casper config quiet components noswap edd=on nomodeset locales=fr_FR.UTF-8 lang=fr_FR.UTF-8 bootkbd=fr keyboard-layouts=fr keyboard-model=pc105 ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch="no" GRUB_GFXMODE=1024x768 ip=frommedia nosplash toram=filesystem.squashfs findiso=$isofile
# linux (loop)/casper/vmlinuz locale=fr_FR boot=casper iso-scan/filename=$isofile $param
initrd (loop)/casper/initrd.lz
}
## Version FR et clavier FR + toram=filesystem.squashfs Monté en mémoire
## https://clonezilla.org/downloads/download.php?branch=alternative Clonezilla live version: 20191024-eoan
menuentry "antivirus avira antivir autonome " {
set isofile="/iso/rescue-system.iso"
loopback loop $isofile
echo "antivirus autonome avira antivir (base ubuntu) "
## config FR
## ajout locales= --> locales=fr_FR.UTF-8 + lang=fr_FR.UTF -8
## ajout keyboard-layouts= --> bootkbd=fr keyboard-layouts=fr keyboard-model=pc105
linux (loop)/casper/vmlinuz boot=casper config quiet components noswap edd=on nomodeset locales=fr_FR.UTF-8 lang=fr_FR.UTF-8 bootkbd=fr keyboard-layouts=fr keyboard-model=pc105 ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch="no" GRUB_GFXMODE=1024x768 ip=frommedia nosplash toram=filesystem.squashfs findiso=$isofile
initrd (loop)/casper/initrd.img
}
je ne sais vraiment plus quoi faire . 
je suis à court de ressources . 
un coup de main est bienvenu.
trouvé ceci : https://doc.ubuntu-fr.org/tutoriel/grub … ions_linux
j'essaie avec system rescue cd , voir ...
si ceci a très bien fonctionné :
################
# Gparted live #
################
menuentry " G parted live " {
set isofile="/iso/gparted-live-1.1.0-1-i686.iso"
--set=root
loopback loop $isofile
linux (loop)/live/vmlinuz findiso=${isofile} boot=live union=overlay username=user config components noswap toram=filesystem.squashfs ip= net.ifnames=0 nosplash locales=fr_FR.UTF-8 keyboard-layouts=fr
initrd (loop)/live/initrd.img
}
en revanche , pour ce code , c'est la cata :
###################
# rescue - system #
###################
menuentry "systemrescuecd Officiel" {
set isofile="/iso/systemrescuecd-6.0.1.iso"
search --no-floppy --label USB-ISOs --set=root
loopback loop $isofile
echo 'Chargement du noyau Linux ...'
linux (loop)/sysresccd/boot/x86_64/vmlinuz img_label=USB-ISOs img_loop=$isofile archisobasedir=sysresccd copytoram setkmap=fr-latin9
echo 'Chargement de initramfs ...'
initrd (loop)/sysresccd/boot/x86_64/sysresccd.img
}
menuentry "systemrescuecd Classique" {
set isofile="/iso/systemrescuecd-6.0.1.iso"
--set=root
loopback loop $isofile
echo 'Chargement du noyau Linux ...'
linux (loop)/sysresccd/boot/x86_64/vmlinuz img_dev=/dev/sdb1 img_loop=$isofile archisobasedir=sysresccd copytoram setkmap=fr-latin9
echo 'Chargement de initramfs ...'
initrd (loop)/sysresccd/boot/x86_64/sysresccd.img
}
réponse du pc :
mounting '/dev/disk/by-label/USB-ISOs' to '/run/archiso/img_dev'
ERROR :
'/dev/disk/by-label/USB-ISOs' device did not show up after 30 seconds .
Falling back to interactive prompt .... etc ....
Dernière modification par Debian Alain (06-02-2020 15:55:10)
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
