Merci, ça s'éclaircit dans ma tête ! Oui, je sais bien que c'est pas un pc pour jouer
ça permet de juger rapidement des perfs avant/après.
Ca marche sous Ubuntu oui mais avec des perfs dégradées. J'ai bien essayé sous Debian de rajouter les firmware mais sans résultat.
Sans nomodeset rien ne boot (même avec X désactivé) mais avec, oui j'ai accès à une console.
Je veux bien un coup de main pour interpreter ça (les erreures de bios étaient presentes avant) :
$ dmesg
[ 0.000000] Linux version 4.19.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.98-1 (2020-01-26)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=26289c9c-eb2d-4c8a-9740-504be5f1c6e6 ro quiet nomodeset
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000084693fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000084694000-0x0000000084694fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000084695000-0x00000000846befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000846bf000-0x0000000086debfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000086dec000-0x0000000087732fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000087733000-0x0000000087812fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000087813000-0x0000000087babfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000087bac000-0x0000000087fa3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000087fa4000-0x0000000087ffdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000173ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x87917000 ACPI 2.0=0x87917000 SMBIOS=0x87ee9000 SMBIOS 3.0=0x87ee8000 ESRT=0x87eeae18
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Notebook W94_95_97JU/W94_95_97JU, BIOS 5.11 11/09/2017
[ 0.000000] tsc: Detected 2100.000 MHz processor
[ 0.005157] tsc: Detected 2112.000 MHz TSC
[ 0.005157] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005159] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.005167] last_pfn = 0x174000 max_arch_pfn = 0x400000000
[ 0.005233] MTRR default type: write-back
[ 0.005234] MTRR fixed ranges enabled:
[ 0.005235] 00000-9FFFF write-back
[ 0.005236] A0000-BFFFF uncachable
[ 0.005237] C0000-FFFFF write-protect
[ 0.005237] MTRR variable ranges enabled:
[ 0.005239] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.005240] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.005241] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.005241] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.005242] 4 base 008A000000 mask 7FFE000000 uncachable
[ 0.005243] 5 base 0089000000 mask 7FFF000000 uncachable
[ 0.005244] 6 base 0088800000 mask 7FFF800000 uncachable
[ 0.005244] 7 disabled
[ 0.005245] 8 disabled
[ 0.005245] 9 disabled
[ 0.006060] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.006210] last_pfn = 0x87fff max_arch_pfn = 0x400000000
[ 0.049921] esrt: Reserving ESRT space from 0x0000000087eeae18 to 0x0000000087eeae50.
[ 0.049929] Using GB pages for direct mapping
[ 0.049932] BRK [0x22401000, 0x22401fff] PGTABLE
[ 0.049933] BRK [0x22402000, 0x22402fff] PGTABLE
[ 0.049934] BRK [0x22403000, 0x22403fff] PGTABLE
[ 0.049959] BRK [0x22404000, 0x22404fff] PGTABLE
[ 0.049961] BRK [0x22405000, 0x22405fff] PGTABLE
[ 0.050210] BRK [0x22406000, 0x22406fff] PGTABLE
[ 0.050253] BRK [0x22407000, 0x22407fff] PGTABLE
[ 0.050255] BRK [0x22408000, 0x22408fff] PGTABLE
[ 0.050321] BRK [0x22409000, 0x22409fff] PGTABLE
[ 0.050366] RAMDISK: [mem 0x33b11000-0x35d7ffff]
[ 0.050372] ACPI: Early table checksum verification disabled
[ 0.050375] ACPI: RSDP 0x0000000087917000 000024 (v02 ALASKA)
[ 0.050378] ACPI: XSDT 0x0000000087917098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.050384] ACPI: FACP 0x000000008792FBB8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.050389] ACPI: DSDT 0x00000000879171D8 0189D9 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.050392] ACPI: FACS 0x0000000087B7BF80 000040
[ 0.050394] ACPI: APIC 0x000000008792FCC8 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.050397] ACPI: FPDT 0x000000008792FD50 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.050399] ACPI: FIDT 0x000000008792FD98 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.050401] ACPI: MCFG 0x000000008792FE38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.050404] ACPI: HPET 0x000000008792FE78 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.050406] ACPI: SSDT 0x000000008792FEB0 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.050409] ACPI: SSDT 0x00000000879301C8 001100 (v01 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.050412] ACPI: DBGP 0x00000000879312C8 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.050414] ACPI: DBG2 0x0000000087931300 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.050417] ACPI: SSDT 0x0000000087931358 003CDD (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.050420] ACPI: UEFI 0x0000000087935038 000042 (v01 00000000 00000000)
[ 0.050422] ACPI: SSDT 0x0000000087935080 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.050425] ACPI: BGRT 0x0000000087935ED8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.050427] ACPI: DMAR 0x0000000087935F10 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.050430] ACPI: TPM2 0x0000000087935FB8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.050433] ACPI: ASF! 0x0000000087935FF0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.050443] ACPI: Local APIC address 0xfee00000
[ 0.050631] No NUMA configuration found
[ 0.050632] Faking a node at [mem 0x0000000000000000-0x0000000173ffffff]
[ 0.050635] NODE_DATA(0) allocated [mem 0x173ff9000-0x173ffdfff]
[ 0.050658] Zone ranges:
[ 0.050659] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.050661] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.050662] Normal [mem 0x0000000100000000-0x0000000173ffffff]
[ 0.050663] Device empty
[ 0.050663] Movable zone start for each node
[ 0.050664] Early memory node ranges
[ 0.050665] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.050666] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.050667] node 0: [mem 0x0000000000100000-0x0000000084693fff]
[ 0.050667] node 0: [mem 0x00000000846bf000-0x0000000086debfff]
[ 0.050668] node 0: [mem 0x0000000087733000-0x0000000087812fff]
[ 0.050668] node 0: [mem 0x0000000087ffe000-0x0000000087ffefff]
[ 0.050669] node 0: [mem 0x0000000100000000-0x0000000173ffffff]
[ 0.050672] Reserved but unavailable: 98 pages
[ 0.050674] Initmem setup node 0 [mem 0x0000000000001000-0x0000000173ffffff]
[ 0.050675] On node 0 totalpages: 1027646
[ 0.050676] DMA zone: 64 pages used for memmap
[ 0.050677] DMA zone: 22 pages reserved
[ 0.050678] DMA zone: 3996 pages, LIFO batch:0
[ 0.050781] DMA32 zone: 8571 pages used for memmap
[ 0.050781] DMA32 zone: 548514 pages, LIFO batch:63
[ 0.066488] Normal zone: 7424 pages used for memmap
[ 0.066489] Normal zone: 475136 pages, LIFO batch:63
[ 0.078607] Reserving Intel graphics memory at [mem 0x89000000-0x8affffff]
[ 0.078813] ACPI: PM-Timer IO Port: 0x1808
[ 0.078815] ACPI: Local APIC address 0xfee00000
[ 0.078821] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.078822] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.078822] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.078823] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.078850] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.078852] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.078853] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.078855] ACPI: IRQ0 used by override.
[ 0.078856] ACPI: IRQ9 used by override.
[ 0.078858] Using ACPI (MADT) for SMP configuration information
[ 0.078859] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.078867] e820: update [mem 0x858a2000-0x85983fff] usable ==> reserved
[ 0.078877] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.078898] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.078900] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.078901] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.078902] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.078904] PM: Registered nosave memory: [mem 0x84694000-0x84694fff]
[ 0.078904] PM: Registered nosave memory: [mem 0x84695000-0x846befff]
[ 0.078906] PM: Registered nosave memory: [mem 0x858a2000-0x85983fff]
[ 0.078907] PM: Registered nosave memory: [mem 0x86dec000-0x87732fff]
[ 0.078909] PM: Registered nosave memory: [mem 0x87813000-0x87babfff]
[ 0.078909] PM: Registered nosave memory: [mem 0x87bac000-0x87fa3fff]
[ 0.078910] PM: Registered nosave memory: [mem 0x87fa4000-0x87ffdfff]
[ 0.078911] PM: Registered nosave memory: [mem 0x87fff000-0x87ffffff]
[ 0.078912] PM: Registered nosave memory: [mem 0x88000000-0x880fffff]
[ 0.078913] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff]
[ 0.078913] PM: Registered nosave memory: [mem 0x89000000-0x8affffff]
[ 0.078914] PM: Registered nosave memory: [mem 0x8b000000-0xdfffffff]
[ 0.078914] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.078915] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.078915] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.078916] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.078916] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.078917] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.078917] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.078918] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.078918] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.078920] [mem 0x8b000000-0xdfffffff] available for PCI devices
[ 0.078921] Booting paravirtualized kernel on bare hardware
[ 0.078925] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.190448] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[ 0.190458] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.190800] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288
[ 0.190810] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152
[ 0.190811] pcpu-alloc: [0] 0 1 2 3
[ 0.190835] Built 1 zonelists, mobility grouping on. Total pages: 1011565
[ 0.190836] Policy zone: Normal
[ 0.190838] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=26289c9c-eb2d-4c8a-9740-504be5f1c6e6 ro quiet nomodeset
[ 0.190927] You have booted with nomodeset. This means your GPU drivers are DISABLED
[ 0.190928] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[ 0.190928] Unless you actually understand what nomodeset does, you should reboot without enabling it
[ 0.200103] Calgary: detecting Calgary via BIOS EBDA area
[ 0.200105] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.220147] Memory: 3867692K/4110584K available (10252K kernel code, 1241K rwdata, 3320K rodata, 1592K init, 2276K bss, 242892K reserved, 0K cma-reserved)
[ 0.220249] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.220256] Kernel/User page tables isolation: enabled
[ 0.220310] ftrace: allocating 31847 entries in 125 pages
[ 0.235315] rcu: Hierarchical RCU implementation.
[ 0.235317] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.235318] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.238439] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[ 0.238754] spurious 8259A interrupt: IRQ7.
[ 0.238781] Console: colour dummy device 80x25
[ 0.238786] console [tty0] enabled
[ 0.238804] ACPI: Core revision 20180810
[ 0.239140] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.239170] hpet clockevent registered
[ 0.239244] APIC: Switch to symmetric I/O mode setup
[ 0.239246] DMAR: Host address width 39
[ 0.239248] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.239253] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.239254] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.239258] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.239259] DMAR: RMRR base: 0x000000874d5000 end: 0x000000874f4fff
[ 0.239260] DMAR: RMRR base: 0x00000088800000 end: 0x0000008affffff
[ 0.239262] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.239263] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.239264] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.239265] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.241360] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.241361] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.245302] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.263181] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns
[ 0.263197] Calibrating delay loop (skipped), value calculated using timer frequency.. 4224.00 BogoMIPS (lpj=8448000)
[ 0.263199] pid_max: default: 32768 minimum: 301
[ 0.263978] Security Framework initialized
[ 0.263979] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.264000] AppArmor: AppArmor initialized
[ 0.265240] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.265871] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.265898] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.265918] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.266145] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.266145] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.266163] CPU0: Thermal monitoring enabled (TM1)
[ 0.266180] process: using mwait in idle threads
[ 0.266183] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.266184] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.266185] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.266187] Spectre V2 : Mitigation: Full generic retpoline
[ 0.266187] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.266188] Speculative Store Bypass: Vulnerable
[ 0.266217] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.266502] Freeing SMP alternatives memory: 24K
[ 0.270842] TSC deadline timer enabled
[ 0.270846] smpboot: CPU0: Intel(R) Pentium(R) CPU 4405U @ 2.10GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.270963] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.270996] ... version: 4
[ 0.270997] ... bit width: 48
[ 0.270997] ... generic registers: 4
[ 0.270998] ... value mask: 0000ffffffffffff
[ 0.270998] ... max period: 00007fffffffffff
[ 0.270999] ... fixed-purpose events: 3
[ 0.271000] ... event mask: 000000070000000f
[ 0.271045] rcu: Hierarchical SRCU implementation.
[ 0.271183] random: crng done (trusting CPU's manufacturer)
[ 0.271183] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.271183] smp: Bringing up secondary CPUs ...
[ 0.271183] x86: Booting SMP configuration:
[ 0.271183] .... node #0, CPUs: #1 #2
[ 0.271183] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.271183] #3
[ 0.271183] smp: Brought up 1 node, 4 CPUs
[ 0.271183] smpboot: Max logical packages: 1
[ 0.271183] smpboot: Total of 4 processors activated (16896.00 BogoMIPS)
[ 0.271391] devtmpfs: initialized
[ 0.271391] x86/mm: Memory block size: 128MB
[ 0.271617] PM: Registering ACPI NVS region [mem 0x84694000-0x84694fff] (4096 bytes)
[ 0.271617] PM: Registering ACPI NVS region [mem 0x87813000-0x87babfff] (3772416 bytes)
[ 0.271617] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.271617] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.271617] pinctrl core: initialized pinctrl subsystem
[ 0.271617] NET: Registered protocol family 16
[ 0.271617] audit: initializing netlink subsys (disabled)
[ 0.271617] audit: type=2000 audit(1586701859.032:1): state=initialized audit_enabled=0 res=1
[ 0.271617] cpuidle: using governor ladder
[ 0.271617] cpuidle: using governor menu
[ 0.271617] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.271617] ACPI: bus type PCI registered
[ 0.271617] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.271617] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.271617] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.271617] PCI: Using configuration type 1 for base access
[ 0.271918] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.271918] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.271918] ACPI: Added _OSI(Module Device)
[ 0.271918] ACPI: Added _OSI(Processor Device)
[ 0.271918] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.271918] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.271918] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.271918] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.303332] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.306433] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.309815] ACPI: Dynamic OEM Table Load:
[ 0.309821] ACPI: SSDT 0xFFFF92E5AE5CC000 0005BB (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.310257] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.311426] ACPI: Dynamic OEM Table Load:
[ 0.311430] ACPI: SSDT 0xFFFF92E5AE629400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.311826] ACPI: Dynamic OEM Table Load:
[ 0.311829] ACPI: SSDT 0xFFFF92E5AE5F3300 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
[ 0.312116] ACPI: Dynamic OEM Table Load:
[ 0.312119] ACPI: SSDT 0xFFFF92E5AE6B0A00 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
[ 0.313002] ACPI: Dynamic OEM Table Load:
[ 0.313008] ACPI: SSDT 0xFFFF92E5AE5CE000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.313619] ACPI: Dynamic OEM Table Load:
[ 0.313622] ACPI: SSDT 0xFFFF92E5AE6B0600 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
[ 0.313998] ACPI: Dynamic OEM Table Load:
[ 0.314001] ACPI: SSDT 0xFFFF92E5AE6B1600 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.316040] ACPI: EC: EC started
[ 0.316041] ACPI: EC: interrupt blocked
[ 0.316726] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.316728] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.316730] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.316730] ACPI: Interpreter enabled
[ 0.316775] ACPI: (supports S0 S3 S4 S5)
[ 0.316777] ACPI: Using IOAPIC for interrupt routing
[ 0.316818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.317384] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.319789] ACPI: Power Resource [PG00] (on)
[ 0.319833] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG0.PG00._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[ 0.319842] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PG00._ON, AE_NOT_FOUND (20180810/psparse-516)
[ 0.320132] ACPI: Power Resource [PG01] (on)
[ 0.320175] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG1.PG01._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[ 0.320182] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG1.PG01._ON, AE_NOT_FOUND (20180810/psparse-516)
[ 0.320454] ACPI: Power Resource [PG02] (on)
[ 0.320496] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG2.PG02._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[ 0.320502] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG2.PG02._ON, AE_NOT_FOUND (20180810/psparse-516)
[ 0.336922] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.336927] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.336959] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.337490] PCI host bridge to bus 0000:00
[ 0.337492] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.337493] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.337494] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.337495] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.337496] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.337497] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.337498] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.337499] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.337500] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.337501] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.337502] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.337503] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.337504] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.337505] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.337506] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.337507] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.337508] pci_bus 0000:00: root bus resource [mem 0x8b000000-0xdfffffff window]
[ 0.337509] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.337510] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.337519] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.337647] pci 0000:00:02.0: [8086:1906] type 00 class 0x030000
[ 0.337660] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[ 0.337666] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.337671] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.337687] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.337867] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.337892] pci 0000:00:14.0: reg 0x10: [mem 0xdf210000-0xdf21ffff 64bit]
[ 0.337967] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.338123] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.338152] pci 0000:00:16.0: reg 0x10: [mem 0xdf22d000-0xdf22dfff 64bit]
[ 0.338233] pci 0000:00:16.0: PME# supported from D3hot
[ 0.338378] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.338399] pci 0000:00:17.0: reg 0x10: [mem 0xdf228000-0xdf229fff]
[ 0.338407] pci 0000:00:17.0: reg 0x14: [mem 0xdf22c000-0xdf22c0ff]
[ 0.338416] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.338424] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.338432] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.338441] pci 0000:00:17.0: reg 0x24: [mem 0xdf22b000-0xdf22b7ff]
[ 0.338487] pci 0000:00:17.0: PME# supported from D3hot
[ 0.338629] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.338707] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.338867] pci 0000:00:1c.1: [8086:9d11] type 01 class 0x060400
[ 0.338943] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.339129] pci 0000:00:1f.0: [8086:9d43] type 00 class 0x060100
[ 0.339369] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.339385] pci 0000:00:1f.2: reg 0x10: [mem 0xdf224000-0xdf227fff]
[ 0.339552] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[ 0.339580] pci 0000:00:1f.3: reg 0x10: [mem 0xdf220000-0xdf223fff 64bit]
[ 0.339608] pci 0000:00:1f.3: reg 0x20: [mem 0xdf200000-0xdf20ffff 64bit]
[ 0.339660] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.339854] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.339914] pci 0000:00:1f.4: reg 0x10: [mem 0xdf22a000-0xdf22a0ff 64bit]
[ 0.339983] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.340258] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
[ 0.340288] pci 0000:01:00.0: reg 0x10: [mem 0xdf115000-0xdf115fff]
[ 0.340335] pci 0000:01:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]
[ 0.340433] pci 0000:01:00.0: supports D1 D2
[ 0.340434] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.340552] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
[ 0.340583] pci 0000:01:00.1: reg 0x10: [io 0xe000-0xe0ff]
[ 0.340612] pci 0000:01:00.1: reg 0x18: [mem 0xdf114000-0xdf114fff 64bit]
[ 0.340630] pci 0000:01:00.1: reg 0x20: [mem 0xdf110000-0xdf113fff 64bit]
[ 0.340732] pci 0000:01:00.1: supports D1 D2
[ 0.340733] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340872] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.340875] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.340878] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.340979] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.341039] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
[ 0.341242] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.341448] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.341453] pci 0000:00:1c.1: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.342588] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.342638] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.342685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.342731] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.342778] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.342824] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.342870] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.342916] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.343490] ACPI: EC: interrupt unblocked
[ 0.343510] ACPI: EC: event unblocked
[ 0.343522] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.343528] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.343635] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.343635] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.343635] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.343635] vgaarb: loaded
[ 0.343635] pps_core: LinuxPPS API ver. 1 registered
[ 0.343635] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.343635] PTP clock support registered
[ 0.343635] EDAC MC: Ver: 3.0.0
[ 0.343635] Registered efivars operations
[ 0.343635] PCI: Using ACPI for IRQ routing
[ 0.372008] PCI: pci_cache_line_size set to 64 bytes
[ 0.372079] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.372080] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.372081] e820: reserve RAM buffer [mem 0x84694000-0x87ffffff]
[ 0.372083] e820: reserve RAM buffer [mem 0x858a2000-0x87ffffff]
[ 0.372084] e820: reserve RAM buffer [mem 0x86dec000-0x87ffffff]
[ 0.372085] e820: reserve RAM buffer [mem 0x87813000-0x87ffffff]
[ 0.372087] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]
[ 0.372183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.372183] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.373330] clocksource: Switched to clocksource tsc-early
[ 0.381160] VFS: Disk quotas dquot_6.6.0
[ 0.381176] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.381283] AppArmor: AppArmor Filesystem Enabled
[ 0.381301] pnp: PnP ACPI init
[ 0.381610] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.381612] system 00:00: [io 0xffff] has been reserved
[ 0.381613] system 00:00: [io 0xffff] has been reserved
[ 0.381615] system 00:00: [io 0xffff] has been reserved
[ 0.381616] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.381617] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.381620] system 00:00: [io 0x3322-0x3323] has been reserved
[ 0.381624] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.381726] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.381764] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.381768] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.381794] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.381906] pnp 00:04: Plug and Play ACPI device, IDs SYN1217 PNP0f13 (active)
[ 0.382137] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.382138] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.382139] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.382141] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.382142] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.382143] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.382144] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.382146] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.382147] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.382149] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.382152] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.382192] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.382193] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.382194] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.382196] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.382197] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.382198] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.382200] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.382202] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.382490] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.382492] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383583] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.383585] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.383586] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.383587] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.383588] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.383592] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384239] pnp: PnP ACPI: found 9 devices
[ 0.389907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.389929] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.389932] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.389936] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.389942] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.389946] pci 0000:00:1c.1: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.389953] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.389955] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.389956] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.389957] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.389958] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.389959] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.389960] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.389961] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.389962] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.389963] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.389964] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.389965] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.389966] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.389967] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.389968] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.389969] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.389970] pci_bus 0000:00: resource 20 [mem 0x8b000000-0xdfffffff window]
[ 0.389971] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[ 0.389972] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.389973] pci_bus 0000:01: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.389974] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
[ 0.390110] NET: Registered protocol family 2
[ 0.390278] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.390295] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.390393] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.390512] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.390546] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.390564] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.390613] NET: Registered protocol family 1
[ 0.390618] NET: Registered protocol family 44
[ 0.390629] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.391366] PCI: CLS 0 bytes, default 64
[ 0.391404] Unpacking initramfs...
[ 1.052981] Freeing initrd memory: 35260K
[ 1.067324] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.067326] software IO TLB: mapped [mem 0x7f978000-0x83978000] (64MB)
[ 1.067358] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns
[ 1.067374] clocksource: Switched to clocksource tsc
[ 1.068088] Initialise system trusted keyrings
[ 1.068098] Key type blacklist registered
[ 1.068145] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.069311] zbud: loaded
[ 1.228228] Key type asymmetric registered
[ 1.228230] Asymmetric key parser 'x509' registered
[ 1.228244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.228277] io scheduler noop registered
[ 1.228278] io scheduler deadline registered
[ 1.228316] io scheduler cfq registered (default)
[ 1.228317] io scheduler mq-deadline registered
[ 1.228807] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.228825] efifb: probing for efifb
[ 1.228841] efifb: framebuffer at 0xc0000000, using 4160k, total 4160k
[ 1.228843] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.228843] efifb: scrolling: redraw
[ 1.228844] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.231271] Console: switching to colour frame buffer device 170x48
[ 1.233526] fb0: EFI VGA frame buffer device
[ 1.233534] intel_idle: MWAIT substates: 0x11142120
[ 1.233535] intel_idle: v0.4.1 model 0x4E
[ 1.233731] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.234502] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.234981] Linux agpgart interface v0.103
[ 1.235023] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.235024] AMD IOMMUv2 functionality not available on this system
[ 1.235312] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
[ 1.784115] i8042: Detected active multiplexing controller, rev 1.1
[ 1.786814] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.786817] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.786840] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.786858] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.786874] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.787023] mousedev: PS/2 mouse device common for all mice
[ 1.787067] rtc_cmos 00:01: RTC can wake from S4
[ 1.787580] rtc_cmos 00:01: registered as rtc0
[ 1.787593] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.787603] intel_pstate: Intel P-state driver initializing
[ 1.787857] intel_pstate: HWP enabled
[ 1.787881] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.788254] NET: Registered protocol family 10
[ 1.790617] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.796459] Segment Routing with IPv6
[ 1.796484] mip6: Mobile IPv6
[ 1.796486] NET: Registered protocol family 17
[ 1.796642] mpls_gso: MPLS GSO support
[ 1.797187] mce: Using 8 MCE banks
[ 1.797223] microcode: sig=0x406e3, pf=0x80, revision=0xba
[ 1.797413] microcode: Microcode Update Driver: v2.2.
[ 1.797425] sched_clock: Marking stable (1796945476, 462972)->(1806278499, -8870051)
[ 1.797601] registered taskstats version 1
[ 1.797602] Loading compiled-in X.509 certificates
[ 1.834288] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.834306] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.834744] zswap: loaded using pool lzo/zbud
[ 1.834856] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.835722] rtc_cmos 00:01: setting system clock to 2020-04-12 14:31:00 UTC (1586701860)
[ 1.837058] Freeing unused kernel image memory: 1592K
[ 1.871324] Write protecting the kernel read-only data: 16384k
[ 1.872059] Freeing unused kernel image memory: 2028K
[ 1.872349] Freeing unused kernel image memory: 776K
[ 1.883014] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.883016] x86/mm: Checking user space page tables
[ 1.892734] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.892736] Run /init as init process
[ 1.962286] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 1.962309] ACPI: Power Button [PWRB]
[ 1.962369] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 1.962385] ACPI: Sleep Button [SLPB]
[ 1.962434] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[ 1.962439] ACPI: Lid Switch [LID0]
[ 1.962485] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 1.962491] ACPI: Power Button [PWRF]
[ 1.979100] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.979102] ACPI: Thermal Zone [TZ0] (55 C)
[ 1.988508] SCSI subsystem initialized
[ 1.998884] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 2.004632] ACPI: bus type USB registered
[ 2.004660] usbcore: registered new interface driver usbfs
[ 2.004670] usbcore: registered new interface driver hub
[ 2.004699] usbcore: registered new device driver usb
[ 2.025220] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.025263] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.030905] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 2.035440] libata version 3.00 loaded.
[ 2.036451] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.036457] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.037531] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 2.037536] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.037714] cryptd: max_cpu_qlen set to 1000
[ 2.037751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.037752] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.037754] usb usb1: Product: xHCI Host Controller
[ 2.037755] usb usb1: Manufacturer: Linux 4.19.0-8-amd64 xhci-hcd
[ 2.037755] usb usb1: SerialNumber: 0000:00:14.0
[ 2.037877] hub 1-0:1.0: USB hub found
[ 2.037893] hub 1-0:1.0: 12 ports detected
[ 2.038471] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.038474] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.038477] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.038512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 2.038514] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.038515] usb usb2: Product: xHCI Host Controller
[ 2.038515] usb usb2: Manufacturer: Linux 4.19.0-8-amd64 xhci-hcd
[ 2.038516] usb usb2: SerialNumber: 0000:00:14.0
[ 2.038620] hub 2-0:1.0: USB hub found
[ 2.038631] hub 2-0:1.0: 4 ports detected
[ 2.043484] ahci 0000:00:17.0: version 3.0
[ 2.043763] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.043766] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 2.047404] libphy: r8169: probed
[ 2.047751] r8169 0000:01:00.1 eth0: RTL8411, 80:fa:5b:22:76:47, XID 5c800800, IRQ 125
[ 2.047753] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.052625] SSE version of gcm_enc/dec engaged.
[ 2.062086] scsi host0: ahci
[ 2.062376] scsi host1: ahci
[ 2.062465] ata1: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b100 irq 124
[ 2.062467] ata2: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b180 irq 124
[ 2.074065] r8169 0000:01:00.1 enp1s0f1: renamed from eth0
[ 2.371233] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[ 2.377801] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.378331] ata2: SATA link down (SStatus 4 SControl 300)
[ 2.379521] ata1.00: ATA-9: LDLC, KFS11004, max UDMA/133
[ 2.379523] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.388802] ata1.00: configured for UDMA/133
[ 2.388809] ahci 0000:00:17.0: port does not support device sleep
[ 2.389707] scsi 0:0:0:0: Direct-Access ATA LDLC 1004 PQ: 0 ANSI: 5
[ 2.394558] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.394566] sd 0:0:0:0: [sda] Write Protect is off
[ 2.394568] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.394576] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.396150] sda: sda1 sda2 sda3 sda4
[ 2.396423] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.557088] usb 1-6: New USB device found, idVendor=04f2, idProduct=b551, bcdDevice=32.07
[ 2.557090] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.557091] usb 1-6: Product: Chicony USB 2.0 Camera
[ 2.557092] usb 1-6: Manufacturer: Generic
[ 2.557093] usb 1-6: SerialNumber: 200901010001
[ 2.617291] PM: Image not found (code -22)
[ 2.687235] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 2.837312] usb 1-7: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=22.01
[ 2.837314] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.837315] usb 1-7: Product: USB Receiver
[ 2.837316] usb 1-7: Manufacturer: Logitech
[ 2.873108] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.878456] usbcore: registered new interface driver usbhid
[ 2.878458] usbhid: USB HID core driver
[ 2.965056] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C52F.0001/input/input11
[ 2.965152] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-7/input0
[ 2.965382] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C52F.0002/input/input12
[ 3.023324] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7/input1
[ 3.092301] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.232506] psmouse serio2: synaptics: queried max coordinates: x [..5712], y [..4872]
[ 3.349281] psmouse serio2: synaptics: queried min coordinates: x [1336..], y [1122..]
[ 3.349287] psmouse serio2: synaptics: Your touchpad (PNP: SYN1217 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 3.499325] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3175, fw id: 2024995
[ 3.514268] systemd[1]: Inserted module 'autofs4'
[ 3.538762] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 3.557010] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.575427] systemd[1]: Detected architecture x86-64.
[ 3.579760] systemd[1]: Set hostname to <w95>.
[ 3.705764] systemd[1]: Listening on Journal Audit Socket.
[ 3.705817] systemd[1]: Reached target Remote File Systems.
[ 3.706925] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.706992] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.707105] systemd[1]: Listening on Journal Socket.
[ 3.707969] systemd[1]: Starting Set the console keyboard layout...
[ 3.708933] systemd[1]: Mounting Huge Pages File System...
[ 3.737683] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.894913] systemd-journald[252]: Received request to flush runtime journal from PID 1
[ 3.926919] ACPI: AC Adapter [AC] (on-line)
[ 3.972407] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80
[ 3.972513] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80
[ 3.973243] battery: ACPI: Battery Slot [BAT0] (battery absent)
[ 4.009560] input: PC Speaker as /devices/platform/pcspkr/input/input17
[ 4.013086] iTCO_vendor_support: vendor-support=0
[ 4.016846] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.017378] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 4.017395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.023667] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.028285] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 4.034507] EFI Variables Facility v0.08 2004-May-17
[ 4.069261] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 4.069264] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.069264] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.069265] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.069266] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.069267] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 4.071512] media: Linux media interface: v0.10
[ 4.136797] pstore: Using compression: deflate
[ 4.136812] pstore: Registered efi as persistent store backend
[ 4.147203] videodev: Linux video capture interface: v2.00
[ 4.180279] Intel(R) Wireless WiFi driver for Linux
[ 4.180280] Copyright(c) 2003- 2015 Intel Corporation
[ 4.180374] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 4.196883] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode
[ 4.197529] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 4.250479] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b551)
[ 4.295440] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 4.295443] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.295445] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.295447] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.295681] input: Chicony USB 2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input18
[ 4.295897] usbcore: registered new interface driver uvcvideo
[ 4.295898] USB Video Class driver (1.1.1)
[ 4.323102] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 4.397386] Adding 2946044k swap on /dev/sda3. Priority:-2 extents:1 across:2946044k SSFS
[ 4.400035] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 4.409647] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7265, REV=0x210
[ 4.427665] iwlwifi 0000:02:00.0: base HW address: 60:57:18:ec:73:7c
[ 4.495501] intel_rapl: Found RAPL domain package
[ 4.495504] intel_rapl: Found RAPL domain core
[ 4.495505] intel_rapl: Found RAPL domain uncore
[ 4.495507] intel_rapl: Found RAPL domain dram
[ 4.501161] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.501534] thermal thermal_zone2: failed to read out thermal zone (-61)
[ 4.504734] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.550655] audit: type=1400 audit(1586701863.208:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=444 comm="apparmor_parser"
[ 4.552065] audit: type=1400 audit(1586701863.212:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=445 comm="apparmor_parser"
[ 4.552071] audit: type=1400 audit(1586701863.212:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=445 comm="apparmor_parser"
[ 4.552074] audit: type=1400 audit(1586701863.212:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=445 comm="apparmor_parser"
[ 4.552128] audit: type=1400 audit(1586701863.212:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=446 comm="apparmor_parser"
[ 4.562952] audit: type=1400 audit(1586701863.220:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=448 comm="apparmor_parser"
[ 4.562959] audit: type=1400 audit(1586701863.220:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=448 comm="apparmor_parser"
[ 4.563052] audit: type=1400 audit(1586701863.220:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=450 comm="apparmor_parser"
[ 4.563055] audit: type=1400 audit(1586701863.220:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=450 comm="apparmor_parser"
[ 5.091040] NET: Registered protocol family 3
[ 5.103900] NET: Registered protocol family 5
[ 5.231093] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.044547] r8169 0000:01:00.1: firmware: direct-loading firmware rtl_nic/rtl8411-2.fw
[ 10.044800] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[ 10.157170] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 10.157378] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 11.757385] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 11.757400] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 12.390219] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 12.557818] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[ 12.689394] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 12.817096] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[ 12.949734] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 14.499876] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 14.499890] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 64.553958] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
[ 64.579942] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 64.579945] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 64.579946] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 64.579947] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 64.579948] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 64.579949] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 64.579950] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 64.594844] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[ 64.595206] hdaudio hdaudioC0D2: Unable to bind the codec
[ 64.595434] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 64.596179] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 64.596278] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 930.485347] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[ 930.636724] usb 1-1: New USB device found, idVendor=1516, idProduct=8628, bcdDevice= 2.00
[ 930.636729] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 930.636731] usb 1-1: Product: FlashDisk
[ 930.636734] usb 1-1: Manufacturer: USB2.0
[ 930.636736] usb 1-1: SerialNumber: 00000000000000000CD251D0
[ 930.662995] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 930.663124] scsi host2: usb-storage 1-1:1.0
[ 930.663234] usbcore: registered new interface driver usb-storage
[ 930.666555] usbcore: registered new interface driver uas
[ 931.690309] scsi 2:0:0:0: Direct-Access USB2.0 FlashDisk 1.00 PQ: 0 ANSI: 2
[ 931.690946] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 931.691517] sd 2:0:0:0: [sdb] 998656 512-byte logical blocks: (511 MB/488 MiB)
[ 931.691716] sd 2:0:0:0: [sdb] Write Protect is off
[ 931.691722] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 931.691902] sd 2:0:0:0: [sdb] No Caching mode page found
[ 931.691989] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 931.697424] sdb: sdb1
[ 931.698497] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1115.147061] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1184.713542] usb 1-1: USB disconnect, device number 4
[ 5165.874780] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 5166.026058] usb 1-3: New USB device found, idVendor=1516, idProduct=8628, bcdDevice= 2.00
[ 5166.026063] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5166.026066] usb 1-3: Product: FlashDisk
[ 5166.026068] usb 1-3: Manufacturer: USB2.0
[ 5166.026070] usb 1-3: SerialNumber: 00000000000000000CD251D0
[ 5166.027631] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 5166.027984] scsi host2: usb-storage 1-3:1.0
[ 5166.467933] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5167.039618] scsi 2:0:0:0: Direct-Access USB2.0 FlashDisk 1.00 PQ: 0 ANSI: 2
[ 5167.040250] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5167.043085] sd 2:0:0:0: [sdb] 998656 512-byte logical blocks: (511 MB/488 MiB)
[ 5167.043299] sd 2:0:0:0: [sdb] Write Protect is off
[ 5167.043304] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5167.043512] sd 2:0:0:0: [sdb] No Caching mode page found
[ 5167.045914] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5167.049505] sdb: sdb1
[ 5167.050585] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 5168.073272] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 5180.575332] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5181.896957] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5183.516004] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 5185.592162] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5187.339563] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 5188.542946] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5189.965117] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[ 5190.097207] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 5191.341540] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5191.518988] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[ 5191.653202] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 5194.761579] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 5194.761594] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 5196.426167] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5198.029451] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off