Bonjour,
Je viens de recycler un vieux serveur HP sous Debian 10.
HP ProLiant ML110 G2
Intel Pentium 4 CPU 3.20GHz
RAM 1G
J’ai installé lm-sensors et puis lance sensors-detect, en validant tout.
Quand je lance la commande sensors
root@matrix:~# sensors
w83792d-i2c-0-2f
Adapter: SMBus I801 adapter at 3080
VcoreA: +1.35 V (min = +0.00 V, max = +2.04 V)
VcoreB: +1.27 V (min = +0.00 V, max = +2.04 V)
in2: +3.32 V (min = +2.80 V, max = +3.79 V)
in3: +3.04 V (min = +2.53 V, max = +3.41 V)
in4: +3.15 V (min = +2.67 V, max = +3.62 V)
in5: +3.14 V (min = +0.00 V, max = +4.08 V)
+5V: +5.06 V (min = +4.49 V, max = +5.50 V)
5VSB: +4.75 V (min = +4.49 V, max = +5.50 V)
Vbat: +2.86 V (min = +2.69 V, max = +3.30 V)
fan1: 2250 RPM (min = 750 RPM, div = 8)
fan2: 2678 RPM (min = 750 RPM, div = 8)
fan3: 0 RPM (min = 750 RPM, div = 8) ALARM
fan4: 0 RPM (min = 750 RPM, div = 8) ALARM
fan5: 0 RPM (min = 750 RPM, div = 8) ALARM
temp1: +33.0°C (high = +80.0°C, hyst = +127.0°C)
temp2: +37.0°C (high = +85.0°C, hyst = +127.0°C)
temp3: +34.5°C (high = +60.0°C, hyst = +127.0°C)
intrusion0: OK
Un rapide tour sur le bios de démarrage de la machine me donne
CPU 42 °
Système 37° (surement temp2 sur sensors)
Bref la température du CPU n’est pas affichée dans sensors.
Avez vous une piste pour connaître la température du CPU avec sensors ?
cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) 4 CPU 3.20GHz
stepping : 1
microcode : 0xd
cpu MHz : 3200.118
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts cpuid pni dtes64 monitor ds_cpl cid cx16 xtpr pti
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
bogomips : 6400.23
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) 4 CPU 3.20GHz
stepping : 1
microcode : 0xd
cpu MHz : 3200.118
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 1
initial apicid : 1
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts cpuid pni dtes64 monitor ds_cpl cid cx16 xtpr pti
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
bogomips : 6400.23
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
sensors3.conf
chip "lm78-*" "lm79-*" "lm80-*" "lm96080-*"
label temp1 "M/B Temp"
chip "w83792d-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in6 "+5V"
label in7 "5VSB"
label in8 "Vbat"
set in6_min 5.0 * 0.90
set in6_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "w83793-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in7 "+5V"
label in8 "5VSB"
label in9 "Vbat"
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 5.0 * 0.90
set in8_max 5.0 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
chip "w83795g-*" "w83795adg-*"
label in12 "+3.3V"
label in13 "3VSB"
label in14 "Vbat"
set in12_min 3.3 * 0.90
set in12_max 3.3 * 1.10
set in13_min 3.3 * 0.90
set in13_max 3.3 * 1.10
set in14_min 3.0 * 0.90
set in14_max 3.3 * 1.10
chip "via686a-*"
label in0 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
chip "adm1025-*" "ne1619-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp1 "CPU Temp"
label temp2 "M/B Temp"
chip "lm87-*" "adm1024-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
label temp1 "M/B Temp"
label temp2 "CPU Temp"
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
label in8 "Vbat"
chip "fscpos-*" "fscher-*"
#FSC "Hermes"
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label temp1 "CPU Temp"
label temp2 "M/B Temp"
label temp3 "Aux Temp"
chip "fscscy-*"
#FSC "Scylla"
label in0 "+12V"
label in1 "+5V"
label in2 "+3.3V"
label temp1 "CPU0 Temp"
label temp2 "CPU1 Temp"
label temp3 "M/B Temp"
label temp4 "Aux Temp"
chip "fschds-*"
# Fujitsu Technology Solutions, "Hades"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp2 "Super I/O Temp"
label temp3 "System Temp"
# Fans
label fan1 "PSU Fan"
label fan2 "CPU Fan"
label fan3 "System FAN2"
label fan4 "System FAN3"
label fan5 "System FAN4"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
chip "fscsyl-*"
# Fujitsu Technology Solutions, "Syleus"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp4 "Super I/O Temp"
label temp5 "Northbridge Temp"
# Fans
label fan1 "CPU Fan"
label fan2 "System FAN2"
label fan3 "System FAN3"
label fan4 "System FAN4"
label fan7 "PSU Fan"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label in3 "+3.3V"
label in5 "+3.3V-Aux"
chip "vt1211-*"
label in5 "+3.3V"
label temp2 "SIO Temp"
chip "vt8231-*"
label in5 "+3.3V"
chip "smsc47m192-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
label temp1 "SIO Temp"
chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" \
"emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
chip "emc6w201-*"
label in2 "+3.3V"
label in3 "+5V"
label temp6 "M/B Temp"
chip "pc87365-*" "pc87366-*"
# Voltage inputs
label in7 "3VSB"
label in8 "VDD"
label in9 "Vbat"
label in10 "AVDD"
compute in7 @*2, @/2
compute in8 @*2, @/2
compute in10 @*2, @/2
# These are the operating conditions as recommended by National
# Semiconductor
set in7_min 3.0
set in7_max 3.6
set in8_min 3.0
set in8_max 3.6
set in10_min 3.0
set in10_max 3.6
# Depending on the hardware setup, the battery voltage may or may not
# be monitored.
# set in9_min 2.4
# set in9_max 3.6
label temp3 "SIO Temp"
set temp3_min 0
set temp3_max 70
set temp3_crit 85
chip "adm1030-*" "adm1031-*"
label temp1 "M/B Temp"
chip "w83627thf-*"
label in3 "+5V"
label in7 "5VSB"
label in8 "Vbat"
# Internal resistors
compute in3 @ * (1 + 34/51), @ / (1 + 34/51)
compute in7 @ * (1 + 34/51), @ / (1 + 34/51)
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
# The battery voltage may or may not be monitored.
# set in8_min 3.0 * 0.90
# set in8_max 3.0 * 1.10
chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" \
"nct6779-*" "nct6791-*" "nct6795-*" "nct6796-*"
label in0 "Vcore"
label in2 "AVCC"
label in3 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 3.3 * 0.90
set in3_max 3.3 * 1.10
set in7_min 3.3 * 0.90
set in7_max 3.3 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.3 * 1.10
chip "w83627uhg-*"
label in2 "AVCC"
label in3 "+5V"
label in7 "5VSB"
label in8 "Vbat"
set in2_min 5.0 * 0.90
set in2_max 5.0 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.3 * 1.10
chip "f71805f-*"
label in0 "+3.3V"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
chip "f71872f-*"
label in0 "+3.3V"
label in9 "Vbat"
label in10 "3VSB"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
set in10_min 3.3 * 0.90
set in10_max 3.3 * 1.10
chip "k8temp-*"
label temp1 "Core0 Temp"
label temp2 "Core0 Temp"
label temp3 "Core1 Temp"
label temp4 "Core1 Temp"
chip "dme1737-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch311x-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch5027-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch5127-*"
label in2 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "f71808e-*" "f71808a-*" "f71862fg-*" "f71869-*" "f71869a-*" "f71882fg-*" \
"f71889fg-*" "f71889ed-*" "f71889a-*"
label in0 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
compute in0 @*2, @/2
compute in7 @*2, @/2
compute in8 @*2, @/2
chip "f71858fg-*" "f8000-*"
label in0 "+3.3V"
label in1 "3VSB"
label in2 "Vbat"
compute in0 @*2, @/2
compute in1 @*2, @/2
compute in2 @*2, @/2
chip "f71868a-*"
label in0 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
label in9 "5VSB"
compute in0 @*2, @/2
compute in7 @*2, @/2
compute in8 @*2, @/2
compute in9 @*3, @/3
chip "f81865f-*"
label in0 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
compute in0 @*2, @/2
compute in5 @*2, @/2
compute in6 @*2, @/2
chip "adt7473-*" "adt7475-*"
label in2 "+3.3V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
label temp2 "Board Temp"
chip "adt7476-*" "adt7490-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your ADT7476 is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
Dernière modification par Magenta (21-04-2020 15:30:43)
L'échec est le fondement de la réussite.