logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 29-04-2020 16:15:35

Anonyme
Invité

[Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Bonjour,

J'ai un petit problème  à l'arrêt ou au redémarrage de PC. (C'est pas tout le temps)

Je suis sous Mate avec Archlinux d'installé.
Une carte Nvidia et le pilote propriètaire (indispensable)
Une carte audio pci Audigy 2 ZS.
Un noyau 5.4.35-1-lts et le 5.6

sudo journalctl -r -p err




-- Logs begin at Wed 2020-04-29 16:41:20 CEST, end at Wed 2020-04-29 16:56:36 CEST. --
-- No entries --
 



ne donne rien.


Dans le /etc/systemd/logind.conf j'ai décommenté le :

KillUserProcesses=yes



J'utilise en permanence un script pour voir le log shutdown-log.txt qui ne varie pas d'un poil dans mes arrêts ou reboot.
https://gist.github.com/AttilaSATAN/d51 … cd73e172d7


...
...
...
[14967.914712] audit: type=1131 audit(1588167102.622:7616): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[14967.914846] audit: type=1131 audit(1588167102.622:7617): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[14967.914937] audit: type=1131 audit(1588167102.622:7618): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[14968.827599] systemd-shutdown[1]: Syncing filesystems and block devices.
[14968.935451] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[14968.939794] systemd-journald[325]: Received SIGTERM from PID 1 (systemd-shutdow).
[14969.016418] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[14969.020553] systemd-shutdown[1]: Unmounting file systems.
[14969.021530] [622807]: Remounting '/' read-only in with options '(null)'.
[14969.122938] EXT4-fs (sda3): re-mounted. Opts: (null)
[14969.163295] systemd-shutdown[1]: All filesystems unmounted.
[14969.163301] systemd-shutdown[1]: Deactivating swaps.
[14969.163366] systemd-shutdown[1]: All swaps deactivated.
[14969.163371] systemd-shutdown[1]: Detaching loop devices.
[14969.163514] systemd-shutdown[1]: All loop devices detached.
[14969.163519] systemd-shutdown[1]: Detaching DM devices.
[14969.163604] systemd-shutdown[1]: All DM devices detached.
[14969.163609] systemd-shutdown[1]: All filesystems, swaps, loop devices and DM devices detached.
[14969.413831] EXT4-fs (sda3): re-mounted. Opts: data=ordered
 



La seul piste que j'ai et qui pour moi est une évidence, c'est le temps que ça met pour que le PC s'arrête qui est d'une minute montre en main.
Le problème se produit le plus souvent lors de l'écoute d'une radio en streaming avec Deadbeef et que je stop franco avant l'arrêt dans la foulé de l'ordi ou bien avec un streaming visionné avec firefox et que je ferme par sa croix.
L'extinction de la machine se fait par Système -- Éteindre , sous Mate.
Je remarque que ce GUI à un compte à rebour de 60 secondes avant arrêt sans intervention de l'utilisateur.
On dirait que c'est le compte à rebours qui s'effectue et pas l'action immédiate de l'utisateur sur le bouton Arrêt.
J'ai donc cet écran noir avec le tiret qui clignote pendant 1 minutes avant l'arrêt ou le reboot.
J'ai donc fait deux commande sur mon tableau de bord avec :

systemctl poweroff



et

systemctl reboot



Ces deux commande, elles, n'ont pas de problème. Si je passe par elles, ce bug disparait.

Je n'arrive pas à trouver quelles commandes sont utilisées par le gui.

Je n'ai aucune freeze, pas de problème de mémoire, de disques durs en apparence et juste ce maigre indice.

Avec ce problème, je ne sais même pas les fichiers logs que je peux vous faire voir.

Une idée ? neutral

Dernière modification par Anonyme (04-05-2020 14:25:37)

#2 30-04-2020 15:03:24

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Un redémarrage lent :


[    0.000000] microcode: microcode updated early to revision 0x1d, date = 2018-05-11
[    0.000000] Linux version 5.4.35-1-lts (linux-lts@archlinux) (gcc version 9.3.0 (Arch Linux 9.3.0-1)) #1 SMP Thu, 23 Apr 2020 09:14:46 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4761844c-f398-4cdc-9c14-95023a3edae0 rw intremap=off pcie_aspm=off audit=0 loglevel=3 quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/P6X58D-E, BIOS 0803    08/06/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3073.732 MHz processor
[    0.002535] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002536] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002541] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.002545] MTRR default type: uncachable
[    0.002546] MTRR fixed ranges enabled:
[    0.002547]   00000-9FFFF write-back
[    0.002548]   A0000-BFFFF uncachable
[    0.002550]   C0000-E3FFF write-protect
[    0.002551]   E4000-EBFFF write-through
[    0.002552]   EC000-FFFFF write-protect
[    0.002553] MTRR variable ranges enabled:
[    0.002554]   0 base 000000000 mask E00000000 write-back
[    0.002556]   1 base 200000000 mask FC0000000 write-back
[    0.002557]   2 base 0C0000000 mask FC0000000 uncachable
[    0.002558]   3 base 0BF800000 mask FFF800000 uncachable
[    0.002559]   4 disabled
[    0.002560]   5 disabled
[    0.002561]   6 disabled
[    0.002562]   7 disabled
[    0.003195] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003303] total RAM covered: 8184M
[    0.003751] Found optimal setting for mtrr clean up
[    0.003752]  gran_size: 64K  chunk_size: 16M   num_reg: 5    lose cover RAM: 0G
[    0.004297] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.004302] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[    0.013710] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[    0.020199] check: Scanning 1 areas for low memory corruption
[    0.020205] BRK [0x235801000, 0x235801fff] PGTABLE
[    0.020207] BRK [0x235802000, 0x235802fff] PGTABLE
[    0.020208] BRK [0x235803000, 0x235803fff] PGTABLE
[    0.020232] BRK [0x235804000, 0x235804fff] PGTABLE
[    0.020234] BRK [0x235805000, 0x235805fff] PGTABLE
[    0.020278] BRK [0x235806000, 0x235806fff] PGTABLE
[    0.020293] BRK [0x235807000, 0x235807fff] PGTABLE
[    0.020311] BRK [0x235808000, 0x235808fff] PGTABLE
[    0.020328] BRK [0x235809000, 0x235809fff] PGTABLE
[    0.020343] BRK [0x23580a000, 0x23580afff] PGTABLE
[    0.020359] BRK [0x23580b000, 0x23580bfff] PGTABLE
[    0.020374] BRK [0x23580c000, 0x23580cfff] PGTABLE
[    0.020407] RAMDISK: [mem 0x36737000-0x37392fff]
[    0.020414] ACPI: Early table checksum verification disabled
[    0.020417] ACPI: RSDP 0x00000000000FB9E0 000014 (v00 ACPIAM)
[    0.020421] ACPI: RSDT 0x00000000BF780000 000048 (v01 080612 RSDT0944 20120806 MSFT 00000097)
[    0.020426] ACPI: FACP 0x00000000BF780200 000084 (v01 080612 FACP0944 20120806 MSFT 00000097)
[    0.020432] ACPI: DSDT 0x00000000BF7804B0 00B384 (v01 A1631  A1631001 00000001 INTL 20060113)
[    0.020436] ACPI: FACS 0x00000000BF798000 000040
[    0.020439] ACPI: APIC 0x00000000BF780390 0000D8 (v01 080612 APIC0944 20120806 MSFT 00000097)
[    0.020443] ACPI: MCFG 0x00000000BF780470 00003C (v01 080612 OEMMCFG  20120806 MSFT 00000097)
[    0.020446] ACPI: OEMB 0x00000000BF798040 000072 (v01 080612 OEMB0944 20120806 MSFT 00000097)
[    0.020450] ACPI: HPET 0x00000000BF78F4B0 000038 (v01 080612 OEMHPET  20120806 MSFT 00000097)
[    0.020454] ACPI: DMAR 0x00000000BF7980C0 000128 (v01 AMI    OEMDMAR  00000001 MSFT 00000097)
[    0.020457] ACPI: ASPT 0x00000000BF798490 000034 (v06 080612 PerfTune 20120806 MSFT 00000097)
[    0.020461] ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 080612 OEMOSFR  20120806 MSFT 00000097)
[    0.020465] ACPI: SSDT 0x00000000BF79A500 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.020474] ACPI: Local APIC address 0xfee00000
[    0.020570] No NUMA configuration found
[    0.020571] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.020574] NODE_DATA(0) allocated [mem 0x23fffc000-0x23fffffff]
[    0.020603] Zone ranges:
[    0.020604]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.020605]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.020606]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.020607]   Device   empty
[    0.020608] Movable zone start for each node
[    0.020609] Early memory node ranges
[    0.020610]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.020611]   node   0: [mem 0x0000000000100000-0x00000000bf77ffff]
[    0.020612]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
[    0.020648] Zeroed struct page in unavailable ranges: 2275 pages
[    0.020649] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.020650] On node 0 totalpages: 2094877
[    0.020651]   DMA zone: 64 pages used for memmap
[    0.020652]   DMA zone: 21 pages reserved
[    0.020653]   DMA zone: 3997 pages, LIFO batch:0
[    0.020739]   DMA32 zone: 12190 pages used for memmap
[    0.020740]   DMA32 zone: 780160 pages, LIFO batch:63
[    0.039724]   Normal zone: 20480 pages used for memmap
[    0.039725]   Normal zone: 1310720 pages, LIFO batch:63
[    0.066470] ACPI: PM-Timer IO Port: 0x808
[    0.066473] ACPI: Local APIC address 0xfee00000
[    0.066490] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.066496] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[    0.066498] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.066500] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.066502] ACPI: IRQ0 used by override.
[    0.066503] ACPI: IRQ9 used by override.
[    0.066506] Using ACPI (MADT) for SMP configuration information
[    0.066507] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.066513] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.066525] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.066527] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.066528] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.066529] PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
[    0.066529] PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
[    0.066531] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[    0.066532] PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff]
[    0.066533] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
[    0.066533] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.066534] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.066535] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.066536] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.066537] [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.066538] Booting paravirtualized kernel on bare hardware
[    0.066541] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.257949] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[    0.258382] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.258389] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.258390] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.258415] Built 1 zonelists, mobility grouping on.  Total pages: 2062122
[    0.258416] Policy zone: Normal
[    0.258418] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4761844c-f398-4cdc-9c14-95023a3edae0 rw intremap=off pcie_aspm=off audit=0 loglevel=3 quiet
[    0.258483] PCIe ASPM is disabled
[    0.258494] audit: disabled (until reboot)
[    0.259079] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.259351] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.259514] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.263850] Calgary: detecting Calgary via BIOS EBDA area
[    0.263851] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.287748] Memory: 8125236K/8379508K available (12291K kernel code, 1325K rwdata, 4040K rodata, 1724K init, 3436K bss, 254272K reserved, 0K cma-reserved)
[    0.287755] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
[    0.287932] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.287946] Kernel/User page tables isolation: enabled
[    0.287964] ftrace: allocating 38416 entries in 151 pages
[    0.303747] rcu: Hierarchical RCU implementation.
[    0.303748] rcu:   RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.303749] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.303750] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.307283] NR_IRQS: 20736, nr_irqs: 960, preallocated irqs: 16
[    0.311039] Console: colour VGA+ 80x25
[    0.311042] printk: console [tty0] enabled
[    0.311062] ACPI: Core revision 20190816
[    0.311147] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.311160] APIC: Switch to symmetric I/O mode setup
[    0.311161] Switched APIC routing to physical flat.
[    0.311804] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.361159] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c4e5923dd4, max_idle_ns: 440795228285 ns
[    0.361163] Calibrating delay loop (skipped), value calculated using timer frequency.. 6147.46 BogoMIPS (lpj=30737320)
[    0.361165] pid_max: default: 32768 minimum: 301
[    0.361203] LSM: Security Framework initializing
[    0.361207] Yama: becoming mindful.
[    0.361242] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.361258] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.361271] *** VALIDATE tmpfs ***
[    0.361430] *** VALIDATE proc ***
[    0.361487] *** VALIDATE cgroup1 ***
[    0.361489] *** VALIDATE cgroup2 ***
[    0.361534] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.361546] process: using mwait in idle threads
[    0.361549] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.361549] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.361552] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.361553] Spectre V2 : Mitigation: Full generic retpoline
[    0.361554] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.361554] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.361556] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.361556] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.361558] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.361560] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.361744] Freeing SMP alternatives memory: 32K
[    0.500371] smpboot: CPU0: Intel(R) Core(TM) i7 CPU         950  @ 3.07GHz (family: 0x6, model: 0x1a, stepping: 0x5)
[    0.500490] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
[    0.500496] core: CPU erratum AAJ80 worked around
[    0.500497] core: CPUID marked event: 'bus cycles' unavailable
[    0.500498] ... version:                3
[    0.500498] ... bit width:              48
[    0.500499] ... generic registers:      4
[    0.500500] ... value mask:             0000ffffffffffff
[    0.500500] ... max period:             000000007fffffff
[    0.500501] ... fixed-purpose events:   3
[    0.500501] ... event mask:             000000070000000f
[    0.500546] rcu: Hierarchical SRCU implementation.
[    0.501160] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.501160] smp: Bringing up secondary CPUs ...
[    0.501160] x86: Booting SMP configuration:
[    0.501160] .... node  #0, CPUs:        #1  #2  #3  #4
[    0.503537] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.503537]   #5  #6  #7
[    0.511211] smp: Brought up 1 node, 8 CPUs
[    0.511211] smpboot: Max logical packages: 2
[    0.511211] smpboot: Total of 8 processors activated (49179.71 BogoMIPS)
[    0.515371] devtmpfs: initialized
[    0.515371] x86/mm: Memory block size: 128MB
[    0.515371] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
[    0.515371] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.515371] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.515371] pinctrl core: initialized pinctrl subsystem
[    0.515371] PM: RTC time: 09:04:11, date: 2020-04-30
[    0.515371] NET: Registered protocol family 16
[    0.515371] cpuidle: using governor ladder
[    0.515371] cpuidle: using governor menu
[    0.515371] ACPI: bus type PCI registered
[    0.515371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.515371] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.515371] PCI: not using MMCONFIG
[    0.515371] PCI: Using configuration type 1 for base access
[    0.515371] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.521269] ACPI: Added _OSI(Module Device)
[    0.521270] ACPI: Added _OSI(Processor Device)
[    0.521271] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.521271] ACPI: Added _OSI(Processor Aggregator Device)
[    0.521272] ACPI: Added _OSI(Linux-Dell-Video)
[    0.521273] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.521274] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.529153] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.541455] ACPI: Dynamic OEM Table Load:
[    0.541455] ACPI: SSDT 0xFFFF8BF8B5F4C000 00202C (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.543289] ACPI: Interpreter enabled
[    0.543308] ACPI: (supports S0 S1 S3 S4 S5)
[    0.543309] ACPI: Using IOAPIC for interrupt routing
[    0.543347] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.552037] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.552052] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.552263] ACPI: Enabled 13 GPEs in block 00 to 3F
[    0.559998] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.560003] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI HPX-Type3]
[    0.560007] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND)
[    0.560343] PCI host bridge to bus 0000:00
[    0.560345] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.560346] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.560347] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.560348] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.560349] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.560350] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[    0.560352] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.560363] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[    0.560390] pci 0000:00:00.0: enabling Extended Tags
[    0.560421] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.560518] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[    0.560543] pci 0000:00:01.0: enabling Extended Tags
[    0.560576] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.560686] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[    0.560713] pci 0000:00:02.0: enabling Extended Tags
[    0.560744] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.560850] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[    0.560875] pci 0000:00:03.0: enabling Extended Tags
[    0.560909] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.561017] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[    0.561044] pci 0000:00:07.0: enabling Extended Tags
[    0.561078] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.561192] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[    0.561311] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[    0.561429] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[    0.561545] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[    0.561653] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.561691] pci 0000:00:1a.0: reg 0x20: [io  0xb800-0xb81f]
[    0.561812] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    0.561850] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
[    0.561970] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    0.562009] pci 0000:00:1a.2: reg 0x20: [io  0xbc00-0xbc1f]
[    0.562134] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.562153] pci 0000:00:1a.7: reg 0x10: [mem 0xf9eff000-0xf9eff3ff]
[    0.562226] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.562324] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.562398] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.562504] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[    0.562578] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.562687] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.562727] pci 0000:00:1d.0: reg 0x20: [io  0xb080-0xb09f]
[    0.562853] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.562891] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
[    0.563012] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.563050] pci 0000:00:1d.2: reg 0x20: [io  0xb480-0xb49f]
[    0.563176] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.563195] pci 0000:00:1d.7: reg 0x10: [mem 0xf9efe000-0xf9efe3ff]
[    0.563269] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.563368] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.563507] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    0.563581] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.563584] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.563587] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.563702] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    0.563717] pci 0000:00:1f.2: reg 0x10: [io  0xac00-0xac07]
[    0.563723] pci 0000:00:1f.2: reg 0x14: [io  0xa880-0xa883]
[    0.563729] pci 0000:00:1f.2: reg 0x18: [io  0xa800-0xa807]
[    0.563735] pci 0000:00:1f.2: reg 0x1c: [io  0xa480-0xa483]
[    0.563741] pci 0000:00:1f.2: reg 0x20: [io  0xa400-0xa41f]
[    0.563748] pci 0000:00:1f.2: reg 0x24: [mem 0xf9efc000-0xf9efc7ff]
[    0.563783] pci 0000:00:1f.2: PME# supported from D3hot
[    0.563876] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.563892] pci 0000:00:1f.3: reg 0x10: [mem 0xf9efd000-0xf9efd0ff 64bit]
[    0.563909] pci 0000:00:1f.3: reg 0x20: [io  0x1000-0x101f]
[    0.564022] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.564067] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[    0.564088] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[    0.564173] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.564234] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.564237] pci 0000:00:02.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
[    0.564268] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.564308] pci 0000:04:00.0: [10de:1c82] type 00 class 0x030000
[    0.564327] pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.564336] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.564346] pci 0000:04:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.564353] pci 0000:04:00.0: reg 0x24: [io  0xcc00-0xcc7f]
[    0.564359] pci 0000:04:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[    0.564437] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:07.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.564473] pci 0000:04:00.1: [10de:0fb9] type 00 class 0x040300
[    0.564487] pci 0000:04:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[    0.564596] pci 0000:00:07.0: PCI bridge to [bus 04]
[    0.564599] pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
[    0.564601] pci 0000:00:07.0:   bridge window [mem 0xfa000000-0xfbcfffff]
[    0.564604] pci 0000:00:07.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.564636] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.564644] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.564690] pci 0000:05:00.0: [11ab:4364] type 00 class 0x020000
[    0.564719] pci 0000:05:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[    0.564730] pci 0000:05:00.0: reg 0x18: [io  0xd800-0xd8ff]
[    0.564767] pci 0000:05:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref]
[    0.564831] pci 0000:05:00.0: supports D1 D2
[    0.564832] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.564891] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.564893] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.564896] pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.564913] pci_bus 0000:07: extended config space not accessible
[    0.564930] pci 0000:07:00.0: [1102:0004] type 00 class 0x040100
[    0.564944] pci 0000:07:00.0: reg 0x10: [io  0xe880-0xe8bf]
[    0.565010] pci 0000:07:00.0: supports D1 D2
[    0.565043] pci 0000:07:00.1: [1102:7003] type 00 class 0x098000
[    0.565056] pci 0000:07:00.1: reg 0x10: [io  0xec00-0xec07]
[    0.565122] pci 0000:07:00.1: supports D1 D2
[    0.565155] pci 0000:07:00.2: [1102:4001] type 00 class 0x0c0010
[    0.565170] pci 0000:07:00.2: reg 0x10: [mem 0xfbeff800-0xfbefffff]
[    0.565178] pci 0000:07:00.2: reg 0x14: [mem 0xfbef8000-0xfbefbfff]
[    0.565241] pci 0000:07:00.2: supports D1 D2
[    0.565242] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
[    0.565310] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.565313] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.565316] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.565320] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.565321] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.565322] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.565323] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.565324] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.565326] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[    0.565981] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.566046] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.566110] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.566175] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.566239] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.566303] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.566367] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.566431] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[    0.566550] iommu: Default domain type: Translated
[    0.566568] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.566568] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.566568] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.566568] vgaarb: loaded
[    0.566568] ACPI: bus type USB registered
[    0.566568] usbcore: registered new interface driver usbfs
[    0.566568] usbcore: registered new interface driver hub
[    0.566568] usbcore: registered new device driver usb
[    0.566568] pps_core: LinuxPPS API ver. 1 registered
[    0.566568] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.566568] PTP clock support registered
[    0.566568] EDAC MC: Ver: 3.0.0
[    0.566568] PCI: Using ACPI for IRQ routing
[    0.572108] PCI: Discovered peer bus ff
[    0.572108] PCI: root bus ff: using default resources
[    0.572109] PCI: Probing PCI hardware (bus ff)
[    0.572126] PCI host bridge to bus 0000:ff
[    0.572128] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    0.572129] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[    0.572130] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    0.572132] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.572136] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[    0.572171] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[    0.572208] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[    0.572239] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[    0.572272] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[    0.572302] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[    0.572335] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[    0.572366] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[    0.572399] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[    0.572432] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[    0.572466] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[    0.572498] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[    0.572529] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[    0.572559] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[    0.572590] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[    0.572623] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[    0.572656] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[    0.572687] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[    0.572721] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[    0.572761] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    0.572763] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.572767] PCI: pci_cache_line_size set to 64 bytes
[    0.572832] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.572833] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[    0.572917] NetLabel: Initializing
[    0.572918] NetLabel:  domain hash size = 128
[    0.572918] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.572935] NetLabel:  unlabeled traffic allowed by default
[    0.572942] hpet: 4 channels of 0 reserved for per-cpu timers
[    0.572942] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.572942] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.573890] clocksource: Switched to clocksource tsc-early
[    0.581639] *** VALIDATE bpf ***
[    0.581715] VFS: Disk quotas dquot_6.6.0
[    0.581733] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.581753] *** VALIDATE ramfs ***
[    0.581756] *** VALIDATE hugetlbfs ***
[    0.581790] pnp: PnP ACPI init
[    0.581878] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[    0.581879] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.581881] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.581882] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.581883] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[    0.581885] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[    0.581889] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.581954] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.582178] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.582182] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.582443] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.582444] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.582446] system 00:03: [io  0x0500-0x057f] could not be reserved
[    0.582447] system 00:03: [io  0x0600-0x0607] has been reserved
[    0.582449] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.582450] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.582451] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.582455] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.582590] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.582594] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.582728] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.582730] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.582733] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.582847] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.582851] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.583046] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.583047] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.583049] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.583050] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.583051] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.583055] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.583201] pnp: PnP ACPI: found 8 devices
[    0.584303] thermal_sys: Registered thermal governor 'fair_share'
[    0.584304] thermal_sys: Registered thermal governor 'bang_bang'
[    0.584305] thermal_sys: Registered thermal governor 'step_wise'
[    0.584305] thermal_sys: Registered thermal governor 'user_space'
[    0.584306] thermal_sys: Registered thermal governor 'power_allocator'
[    0.588837] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.588874] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[    0.588876] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000 add_align 100000
[    0.588878] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.588887] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[    0.588891] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.588893] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.588895] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.588901] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.588904] pci 0000:00:02.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
[    0.588909] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.588915] pci 0000:00:07.0: PCI bridge to [bus 04]
[    0.588917] pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
[    0.588920] pci 0000:00:07.0:   bridge window [mem 0xfa000000-0xfbcfffff]
[    0.588922] pci 0000:00:07.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.588925] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.588927] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.588930] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
[    0.588933] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.588937] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.588939] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.588942] pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.588944] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.588949] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.588951] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.588954] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.588960] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.588961] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.588962] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.588963] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.588964] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.588965] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.588967] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[    0.588968] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.588969] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbcfffff]
[    0.588970] pci_bus 0000:04: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.588971] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.588972] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[    0.588973] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.588974] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.588975] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.588976] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.588978] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.588979] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.588980] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.588981] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.588982] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.588983] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.588984] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.588985] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.589037] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.589038] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.589067] NET: Registered protocol family 2
[    0.589257] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.589314] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.589478] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.589578] TCP: Hash tables configured (established 65536 bind 65536)
[    0.589629] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.589662] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.589726] NET: Registered protocol family 1
[    0.589730] NET: Registered protocol family 44
[    0.591401] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.591412] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.591449] PCI: CLS 256 bytes, default 64
[    0.591561] Trying to unpack rootfs image as initramfs...
[    0.719245] Freeing initrd memory: 12656K
[    0.719274] DMAR: Host address width 39
[    0.719275] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
[    0.719288] DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
[    0.719289] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
[    0.719290] DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff
[    0.719291] DMAR: ATSR flags: 0x0
[    0.759105] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.759108] software IO TLB: mapped [mem 0xbb780000-0xbf780000] (64MB)
[    0.759269] check: Scanning for low memory corruption every 60 seconds
[    0.759647] Initialise system trusted keyrings
[    0.759656] Key type blacklist registered
[    0.759692] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.760816] zbud: loaded
[    0.765412] Key type asymmetric registered
[    0.765413] Asymmetric key parser 'x509' registered
[    0.765419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.765459] io scheduler mq-deadline registered
[    0.765460] io scheduler kyber registered
[    0.765481] io scheduler bfq registered
[    0.765888] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.766270] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.766327] intel_idle: MWAIT substates: 0x1120
[    0.766328] intel_idle: v0.4.1 model 0x1A
[    0.766591] intel_idle: lapic_timer_reliable_states 0x2
[    0.766642] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.766659] ACPI: Power Button [PWRB]
[    0.766690] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.766774] ACPI: Power Button [PWRF]
[    0.767230] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.767742] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.767742] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.768730] usbcore: registered new interface driver usbserial_generic
[    0.768733] usbserial: USB Serial support registered for generic
[    0.768749] rtc_cmos 00:01: RTC can wake from S4
[    0.768926] rtc_cmos 00:01: registered as rtc0
[    0.768949] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.769002] intel_pstate: CPU model not supported
[    0.769317] ledtrig-cpu: registered to indicate activity on CPUs
[    0.769362] drop_monitor: Initializing network drop monitor service
[    0.769511] NET: Registered protocol family 10
[    0.776950] Segment Routing with IPv6
[    0.776983] NET: Registered protocol family 17
[    0.777905] RAS: Correctable Errors collector initialized.
[    0.777973] microcode: sig=0x106a5, pf=0x2, revision=0x1d
[    0.778218] microcode: Microcode Update Driver: v2.2.
[    0.778221] IPI shorthand broadcast: enabled
[    0.778226] sched_clock: Marking stable (774655975, 3557072)->(802848139, -24635092)
[    0.778368] registered taskstats version 1
[    0.778374] Loading compiled-in X.509 certificates
[    0.783087] Loaded X.509 cert 'Build time autogenerated kernel key: e7309a3d3f50615c8caeda5b11526982b8d3c4fa'
[    0.783126] zswap: loaded using pool lzo/zbud
[    0.783407] Key type ._fscrypt registered
[    0.783409] Key type .fscrypt registered
[    0.789552] Key type big_key registered
[    0.789984] PM:   Magic number: 0:708:71
[    0.790109] rtc_cmos 00:01: setting system clock to 2020-04-30T09:04:12 UTC (1588237452)
[    0.791308] Freeing unused decrypted memory: 2040K
[    0.791651] Freeing unused kernel image memory: 1724K
[    0.876542] Write protecting the kernel read-only data: 18432k
[    0.877157] Freeing unused kernel image memory: 2012K
[    0.877292] Freeing unused kernel image memory: 56K
[    0.889817] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.889894] x86/mm: Checking user space page tables
[    0.901957] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.901958] Run /init as init process
[    0.978631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.980316] ehci-pci: EHCI PCI platform driver
[    0.980556] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.980564] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.980576] ehci-pci 0000:00:1a.7: debug port 1
[    0.984495] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[    0.984510] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9eff000
[    0.994264] SCSI subsystem initialized
[    1.001350] libata version 3.00 loaded.
[    1.004672] ahci 0000:00:1f.2: version 3.0
[    1.004859] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.004893] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.004895] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
[    1.006346] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.006406] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.006408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.006409] usb usb1: Product: EHCI Host Controller
[    1.006410] usb usb1: Manufacturer: Linux 5.4.35-1-lts ehci_hcd
[    1.006411] usb usb1: SerialNumber: 0000:00:1a.7
[    1.006511] hub 1-0:1.0: USB hub found
[    1.006522] hub 1-0:1.0: 6 ports detected
[    1.006669] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.006674] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    1.006760] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[    1.006980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.006981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.006982] usb usb2: Product: xHCI Host Controller
[    1.006983] usb usb2: Manufacturer: Linux 5.4.35-1-lts xhci-hcd
[    1.006984] usb usb2: SerialNumber: 0000:02:00.0
[    1.007063] hub 2-0:1.0: USB hub found
[    1.007074] hub 2-0:1.0: 2 ports detected
[    1.007175] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.007179] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    1.007186] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.007189] ehci-pci 0000:00:1d.7: debug port 1
[    1.007189] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    1.007192] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[    1.010161] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.010201] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    1.010202] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.010203] usb usb4: Product: xHCI Host Controller
[    1.010205] usb usb4: Manufacturer: Linux 5.4.35-1-lts xhci-hcd
[    1.010206] usb usb4: SerialNumber: 0000:02:00.0
[    1.010289] hub 4-0:1.0: USB hub found
[    1.010303] hub 4-0:1.0: 2 ports detected
[    1.011103] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[    1.011114] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9efe000
[    1.036520] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.036679] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.036681] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.036682] usb usb3: Product: EHCI Host Controller
[    1.036683] usb usb3: Manufacturer: Linux 5.4.35-1-lts ehci_hcd
[    1.036684] usb usb3: SerialNumber: 0000:00:1d.7
[    1.036926] hub 3-0:1.0: USB hub found
[    1.036983] hub 3-0:1.0: 6 ports detected
[    1.039953] uhci_hcd: USB Universal Host Controller Interface driver
[    1.040112] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.040116] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    1.040124] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.040147] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    1.040218] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.040220] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.040221] usb usb5: Product: UHCI Host Controller
[    1.040222] usb usb5: Manufacturer: Linux 5.4.35-1-lts uhci_hcd
[    1.040223] usb usb5: SerialNumber: 0000:00:1a.0
[    1.040360] hub 5-0:1.0: USB hub found
[    1.040371] hub 5-0:1.0: 2 ports detected
[    1.040589] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.040592] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[    1.040597] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.040618] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    1.040678] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.040680] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.040681] usb usb6: Product: UHCI Host Controller
[    1.040682] usb usb6: Manufacturer: Linux 5.4.35-1-lts uhci_hcd
[    1.040683] usb usb6: SerialNumber: 0000:00:1a.1
[    1.040865] hub 6-0:1.0: USB hub found
[    1.040879] hub 6-0:1.0: 2 ports detected
[    1.041142] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.041146] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[    1.041151] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.041172] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[    1.041234] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.041235] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.041236] usb usb7: Product: UHCI Host Controller
[    1.041237] usb usb7: Manufacturer: Linux 5.4.35-1-lts uhci_hcd
[    1.041238] usb usb7: SerialNumber: 0000:00:1a.2
[    1.041388] hub 7-0:1.0: USB hub found
[    1.041401] hub 7-0:1.0: 2 ports detected
[    1.041738] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.041742] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.041747] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.041763] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    1.042058] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.042060] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.042061] usb usb8: Product: UHCI Host Controller
[    1.042062] usb usb8: Manufacturer: Linux 5.4.35-1-lts uhci_hcd
[    1.042063] usb usb8: SerialNumber: 0000:00:1d.0
[    1.042204] hub 8-0:1.0: USB hub found
[    1.042214] hub 8-0:1.0: 2 ports detected
[    1.042416] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.042420] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    1.042425] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.042441] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    1.042496] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.042497] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.042498] usb usb9: Product: UHCI Host Controller
[    1.042499] usb usb9: Manufacturer: Linux 5.4.35-1-lts uhci_hcd
[    1.042500] usb usb9: SerialNumber: 0000:00:1d.1
[    1.042634] hub 9-0:1.0: USB hub found
[    1.042645] hub 9-0:1.0: 2 ports detected
[    1.042844] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.042849] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    1.042854] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.042870] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    1.042928] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.042930] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.042931] usb usb10: Product: UHCI Host Controller
[    1.042932] usb usb10: Manufacturer: Linux 5.4.35-1-lts uhci_hcd
[    1.042933] usb usb10: SerialNumber: 0000:00:1d.2
[    1.043062] hub 10-0:1.0: USB hub found
[    1.043071] hub 10-0:1.0: 2 ports detected
[    1.066513] firewire_ohci 0000:07:00.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.146774] scsi host0: ahci
[    1.146889] scsi host1: ahci
[    1.146987] scsi host2: ahci
[    1.147079] scsi host3: ahci
[    1.147187] scsi host4: ahci
[    1.147275] scsi host5: ahci
[    1.147320] ata1: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc100 irq 31
[    1.147322] ata2: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc180 irq 31
[    1.147323] ata3: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc200 irq 31
[    1.147324] ata4: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc280 irq 31
[    1.147326] ata5: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc300 irq 31
[    1.147327] ata6: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc380 irq 31
[    1.591449] firewire_core 0000:07:00.2: created device fw0: GUID 00023c01510e311f, S400
[    1.661289] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[    1.661297] usb 9-1: new low-speed USB device number 2 using uhci_hcd
[    1.671305] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.718905] ata1.00: ATA-7: MAXTOR STM380815AS, 3.AAD, max UDMA/133
[    1.718908] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 32)
[    1.777210] ata1.00: configured for UDMA/133
[    1.777557] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM380815 D    PQ: 0 ANSI: 5
[    1.831266] tsc: Refined TSC clocksource calibration: 3073.644 MHz
[    1.831275] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c4e063b40d, max_idle_ns: 440795254442 ns
[    1.831438] clocksource: Switched to clocksource tsc
[    1.890539] usb 9-1: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20
[    1.890542] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.890544] usb 9-1: Product: USB-PS/2 Optical Mouse
[    1.890546] usb 9-1: Manufacturer: Logitech
[    1.893272] usb 7-1: New USB device found, idVendor=05e3, idProduct=0681, bcdDevice= 1.00
[    1.893275] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.893277] usb 7-1: Product: GameCube to USB convertor
[    1.893279] usb 7-1: Manufacturer: Austgame
[    1.897207] hidraw: raw HID events driver (C) Jiri Kosina
[    1.936414] usbcore: registered new interface driver usbhid
[    1.936415] usbhid: USB HID core driver
[    1.938203] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/0003:046D:C050.0001/input/input2
[    1.938282] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[    1.938397] input: Austgame GameCube to USB convertor as /devices/pci0000:00/0000:00:1a.2/usb7/7-1/7-1:1.0/0003:05E3:0681.0002/input/input3
[    1.938528] hid-generic 0003:05E3:0681.0002: input,hiddev0,hidraw1: USB HID v1.00 Joystick [Austgame GameCube to USB convertor] on usb-0000:00:1a.2-1/input0
[    2.011311] random: fast init done
[    2.113506] ata2: SATA link down (SStatus 0 SControl 300)
[    2.611274] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.611561] ata3.00: ATAPI: PLEXTOR DVDR   PX-880SA, 1.12, max UDMA/100
[    2.612358] ata3.00: configured for UDMA/100
[    2.615328] scsi 2:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-880SA  1.12 PQ: 0 ANSI: 5
[    2.741261] usb 9-2: new low-speed USB device number 3 using uhci_hcd
[    3.018534] usb 9-2: New USB device found, idVendor=413c, idProduct=2105, bcdDevice= 3.52
[    3.018537] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.018539] usb 9-2: Product: Dell USB Keyboard
[    3.018541] usb 9-2: Manufacturer: Dell
[    3.086763] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/0003:413C:2105.0003/input/input4
[    3.161276] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.161435] hid-generic 0003:413C:2105.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2/input0
[    3.227223] ata4.00: ATA-8: WDC WD10EARS-67Y5B1, 80.00A80, max UDMA/133
[    3.227225] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    3.229362] ata4.00: configured for UDMA/133
[    3.229659] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EARS-67Y 0A80 PQ: 0 ANSI: 5
[    3.564442] ata5: SATA link down (SStatus 0 SControl 300)
[    3.894440] ata6: SATA link down (SStatus 0 SControl 300)
[    3.898443] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    3.898444] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.898446] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    3.898463] sd 0:0:0:0: [sda] Write Protect is off
[    3.898464] sd 3:0:0:0: [sdb] Write Protect is off
[    3.898466] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.898466] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.898500] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.898500] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.954876]  sdb: sdb1
[    3.955460] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.000575]  sda: sda1 sda2 sda3 sda4
[    4.001535] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.004292] sr 2:0:0:0: [sr0] scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.004294] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.061681] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    5.058385] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    6.942971] systemd[1]: systemd 245.5-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.971391] systemd[1]: Detected architecture x86-64.
[    7.094270] systemd[1]: Set hostname to <PC1>.
[    8.676976] systemd[1]: /usr/lib/systemd/system/fancontrol.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid \xe2\x86\x92 /run/fancontrol.pid; please update the unit file accordingly.
[    8.695463] random: systemd: uninitialized urandom read (16 bytes read)
[    8.696204] systemd[1]: Created slice system-getty.slice.
[    8.696236] random: systemd: uninitialized urandom read (16 bytes read)
[    8.696433] systemd[1]: Created slice system-modprobe.slice.
[    8.696445] random: systemd: uninitialized urandom read (16 bytes read)
[    8.696667] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.696907] systemd[1]: Created slice User and Session Slice.
[    8.696960] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.697008] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.697175] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.697211] systemd[1]: Reached target Local Encrypted Volumes.
[    8.697225] systemd[1]: Reached target Login Prompts.
[    8.697245] systemd[1]: Reached target Paths.
[    8.697261] systemd[1]: Reached target Remote File Systems.
[    8.697274] systemd[1]: Reached target Slices.
[    8.697340] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.702650] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.703033] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.704662] systemd[1]: Listening on Process Core Dump Socket.
[    8.704713] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.750680] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[    8.750832] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.750928] systemd[1]: Listening on Journal Socket.
[    8.762251] systemd[1]: Listening on udev Control Socket.
[    8.762329] systemd[1]: Listening on udev Kernel Socket.
[    8.763067] systemd[1]: Mounting Huge Pages File System...
[    8.763835] systemd[1]: Mounting POSIX Message Queue File System...
[    8.764668] systemd[1]: Mounting Kernel Debug File System...
[    8.765660] systemd[1]: Mounting Kernel Trace File System...
[    8.766524] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    8.767618] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.768610] systemd[1]: Starting Load Kernel Module drm...
[    8.851412] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    8.851446] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    8.852856] systemd[1]: Starting Journal Service...
[    8.881336] systemd[1]: Starting Load Kernel Modules...
[    8.882305] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.883270] systemd[1]: Starting udev Coldplug all Devices...
[    8.884843] systemd[1]: Mounted Huge Pages File System.
[    8.884993] systemd[1]: Mounted POSIX Message Queue File System.
[    8.885130] systemd[1]: Mounted Kernel Debug File System.
[    8.885266] systemd[1]: Mounted Kernel Trace File System.
[    8.885800] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    8.947656] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    8.948786] systemd[1]: Finished Remount Root and Kernel File Systems.
[    8.948905] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    9.086695] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    9.087750] systemd[1]: Starting Load/Save Random Seed...
[    9.087801] systemd[1]: Condition check resulted in Create System Users being skipped.
[    9.088757] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.187610] Linux agpgart interface v0.103
[    9.217343] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.217412] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    9.217460] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    9.233294] systemd[1]: Started LVM2 metadata daemon.
[    9.246500] systemd[1]: Finished udev Coldplug all Devices.
[    9.307628] systemd[1]: Started Journal Service.
[    9.460439] systemd-journald[324]: Received client request to flush runtime journal.
[    9.525780] gameport gameport0: EMU10K1 is pci0000:07:00.1/gameport0, io 0xec00, speed 934kHz
[    9.621434] input: Microsoft SideWinder GamePad as /devices/pci0000:00/0000:00:1e.0/0000:07:00.1/gameport0/input/input5
[   11.568232] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[   11.568253] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[   11.568268] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   11.569930] i5500_temp 0000:00:14.3: Sensor seems to be disabled
[   11.605584] ACPI Warning: SystemIO range 0x0000000000001000-0x000000000000101F conflicts with OpRegion 0x0000000000001000-0x000000000000100F (\SMRG) (20190816/utaddress-204)
[   11.605591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.631179] random: crng init done
[   11.631180] random: 7 urandom warning(s) missed due to ratelimiting
[   12.021681] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   12.021946] mousedev: PS/2 mouse device common for all mice
[   12.022180] sky2: driver version 1.30
[   12.022281] sky2 0000:05:00.0: Yukon-2 EC Ultra chip revision 3
[   12.022479] sky2 0000:05:00.0 eth0: addr 20:cf:30:3e:61:8a
[   12.801902] sky2 0000:05:00.0 enp5s0: renamed from eth0
[   12.815323] IPMI message handler: version 39.2
[   12.836410] ipmi device interface
[   13.079975] snd_emu10k1 0000:07:00.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[   13.181826] sr 2:0:0:0: [sr0] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.181832] sr 2:0:0:0: [sr0] tag#9 Sense Key : Illegal Request [current]
[   13.181836] sr 2:0:0:0: [sr0] tag#9 Add. Sense: Read of scrambled sector without authentication
[   13.181840] sr 2:0:0:0: [sr0] tag#9 CDB: Read(10) 28 00 00 3d 05 00 00 00 40 00
[   13.181844] blk_update_request: I/O error, dev sr0, sector 15995904 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[   13.201331] Adding 8388604k swap on /dev/sda2.  Priority:-2 extents:1 across:8388604k FS
[   13.311831] sr 2:0:0:0: [sr0] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.311836] sr 2:0:0:0: [sr0] tag#10 Sense Key : Illegal Request [current]
[   13.311840] sr 2:0:0:0: [sr0] tag#10 Add. Sense: Read of scrambled sector without authentication
[   13.311844] sr 2:0:0:0: [sr0] tag#10 CDB: Read(10) 28 00 00 3d 05 00 00 00 02 00
[   13.311847] blk_update_request: I/O error, dev sr0, sector 15995904 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   13.311851] Buffer I/O error on dev sr0, logical block 1999488, async page read
[   15.326509] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   15.443488] nvidia: loading out-of-tree module taints kernel.
[   15.443497] nvidia: module license 'NVIDIA' taints kernel.
[   15.443498] Disabling lock debugging due to kernel taint
[   15.450288] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   15.452796] EXT4-fs (sda1): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl
[   15.452940] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[   15.460778] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[   15.461306] nvidia 0000:04:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[   15.561655] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  440.82  Wed Apr  1 20:04:33 UTC 2020
[   15.768868] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  440.82  Wed Apr  1 19:41:29 UTC 2020
[   15.820731] [drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
[   15.820735] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:04:00.0 on minor 0
[   16.427395] w83627ehf: Found W83667HG chip at 0x290
[   16.427425] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB.PCI0.SBRG.SIOR.HWRE) (20190816/utaddress-204)
[   16.427431] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.640146] 8021q: 802.1Q VLAN Support v1.8
[   17.925727] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   17.967108] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   18.271046] sky2 0000:05:00.0 enp5s0: enabling interface
[   19.972880] sky2 0000:05:00.0 enp5s0: Link is up at 100 Mbps, full duplex, flow control both
[   19.972903] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[   25.331440] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[   25.331738] caller _nv000908rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[   30.178474] fuse: init (API version 7.31)
[   30.178514] *** VALIDATE fuse ***
[   30.178518] *** VALIDATE fuse ***
[   68.293672] UDF-fs: INFO Mounting volume 'PMP_S4_D1', timestamp 2007/04/10 08:49 (1000)
[  384.671984] VFS: busy inodes on changed media or resized disk sr0
[  497.550570] UDF-fs: INFO Mounting volume 'LA_CHUTE_DVD1_SCN', timestamp 2005/06/23 10:58 (1000)
[ 1093.442255] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79900
[ 1279.445190] nvidia-uvm: Loaded the UVM driver, major device number 237.
[ 1376.771421] perf: interrupt took too long (3429 > 3127), lowering kernel.perf_event_max_sample_rate to 58300
[ 4360.301454] perf: interrupt took too long (4355 > 4286), lowering kernel.perf_event_max_sample_rate to 45900
[17750.323187] systemd-shutdown[1]: Syncing filesystems and block devices.
[17750.422119] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[17750.426513] systemd-journald[324]: Received SIGTERM from PID 1 (systemd-shutdow).
[17750.502069] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[17750.506130] systemd-shutdown[1]: Unmounting file systems.
[17750.507069] [744919]: Remounting '/' read-only in with options '(null)'.
[17750.683022] EXT4-fs (sda3): re-mounted. Opts: (null)
[17750.704819] systemd-shutdown[1]: All filesystems unmounted.
[17750.704826] systemd-shutdown[1]: Deactivating swaps.
[17750.704893] systemd-shutdown[1]: All swaps deactivated.
[17750.704898] systemd-shutdown[1]: Detaching loop devices.
[17750.705044] systemd-shutdown[1]: All loop devices detached.
[17750.705049] systemd-shutdown[1]: Detaching DM devices.
[17750.705135] systemd-shutdown[1]: All DM devices detached.
[17750.705140] systemd-shutdown[1]: All filesystems, swaps, loop devices and DM devices detached.
[17750.965999] EXT4-fs (sda3): re-mounted. Opts: data=ordered
 

#3 30-04-2020 16:25:02

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Salut,

Ce que je trouve d'étrange dans tes logs :

[17750.502069] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[17750.506130] systemd-shutdown[1]: Unmounting file systems.
[17750.507069] 744919]: Remounting '/' read-only in with options '(null)'.
[17750.683022] EXT4-fs (sda3): re-mounted. Opts: (null)
[17750.704819] systemd-shutdown[1]: All filesystems unmounted.
[17750.704826] systemd-shutdown[1]: Deactivating swaps.
[17750.704893] systemd-shutdown[1]: All swaps deactivated.
[17750.704898] systemd-shutdown[1]: Detaching loop devices.
[17750.705044] systemd-shutdown[1]: All loop devices detached.
[17750.705049] systemd-shutdown[1]: Detaching DM devices.
[17750.705135] systemd-shutdown[1]: All DM devices detached.
[17750.705140] systemd-shutdown[1]: All filesystems, swaps, loop devices and DM devices detached.
[17750.965999] EXT4-fs (sda3): re-mounted. Opts: data=ordered



C'est que sda3, ce trouve "démonté", puis remonté de nouveau...C'est valable pour ton premier log également.

sda3 contient ton système ?

Vigen.

Dernière modification par vigen (30-04-2020 16:26:37)

Hors ligne

#4 30-04-2020 18:22:49

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

vigen a écrit :



sda3 contient ton système ?

Vigen.



Bonsoir,

oui, c'est bien ça.

Dernière modification par Anonyme (30-04-2020 18:23:03)

#5 01-05-2020 12:57:00

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Bon par prudence, j'ai fait un clonage de mon dique de 80 go ( déjà viellisant) et restauré tout ça sur un WD Blue de 500go quasi neuf.
Ce disque de 80 go m'inquiète un peu, par moment, on dirait "qu'il se coupe" (comme un petit clac et un bruit de redémarrage).
Mise à part une grande surface non allouée sur mon disque, qui me servira pour mon home juste devant, je vais partir sur ça et tester si le problème persiste. smile

le log après arrêt normal :


[    0.000000] microcode: microcode updated early to revision 0x1d, date = 2018-05-11
[    0.000000] Linux version 5.4.36-1-lts (linux-lts@archlinux) (gcc version 9.3.0 (Arch Linux 9.3.0-1)) #1 SMP Wed, 29 Apr 2020 16:23:03 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4761844c-f398-4cdc-9c14-95023a3edae0 rw intremap=off pcie_aspm=off audit=0 quiet loglevel=3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/P6X58D-E, BIOS 0803    08/06/2012
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E3FFF write-protect
[    0.000000]   E4000-EBFFF write-through
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8184M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 16M   num_reg: 5    lose cover RAM: 0G
[    0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] BRK [0x95e01000, 0x95e01fff] PGTABLE
[    0.000000] BRK [0x95e02000, 0x95e02fff] PGTABLE
[    0.000000] BRK [0x95e03000, 0x95e03fff] PGTABLE
[    0.000000] BRK [0x95e04000, 0x95e04fff] PGTABLE
[    0.000000] BRK [0x95e05000, 0x95e05fff] PGTABLE
[    0.000000] BRK [0x95e06000, 0x95e06fff] PGTABLE
[    0.000000] BRK [0x95e07000, 0x95e07fff] PGTABLE
[    0.000000] BRK [0x95e08000, 0x95e08fff] PGTABLE
[    0.000000] BRK [0x95e09000, 0x95e09fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3673b000-0x37394fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB9E0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000BF780000 000048 (v01 080612 RSDT0944 20120806 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BF780200 000084 (v01 080612 FACP0944 20120806 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BF7804B0 00B384 (v01 A1631  A1631001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000BF798000 000040
[    0.000000] ACPI: APIC 0x00000000BF780390 0000D8 (v01 080612 APIC0944 20120806 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BF780470 00003C (v01 080612 OEMMCFG  20120806 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BF798040 000072 (v01 080612 OEMB0944 20120806 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BF78F4B0 000038 (v01 080612 OEMHPET  20120806 MSFT 00000097)
[    0.000000] ACPI: DMAR 0x00000000BF7980C0 000128 (v01 AMI    OEMDMAR  00000001 MSFT 00000097)
[    0.000000] ACPI: ASPT 0x00000000BF798490 000034 (v06 080612 PerfTune 20120806 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 080612 OEMOSFR  20120806 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BF79A500 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fff9000-0x23fffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf77ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000] Zeroed struct page in unavailable ranges: 2275 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.000000] On node 0 totalpages: 2094877
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12190 pages used for memmap
[    0.000000]   DMA32 zone: 780160 pages, LIFO batch:63
[    0.000000]   Normal zone: 20480 pages used for memmap
[    0.000000]   Normal zone: 1310720 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2062122
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4761844c-f398-4cdc-9c14-95023a3edae0 rw intremap=off pcie_aspm=off audit=0 quiet loglevel=3
[    0.000000] PCIe ASPM is disabled
[    0.000000] audit: disabled (until reboot)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8125232K/8379508K available (12291K kernel code, 1326K rwdata, 4040K rodata, 1724K init, 3436K bss, 254276K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 38417 entries in 151 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:   RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 20736, nr_irqs: 960, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20190816
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] Switched APIC routing to physical flat.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060000] tsc: PIT calibration matches HPET. 1 loops
[    0.060000] tsc: Detected 3073.644 MHz processor
[    0.000003] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c4e063b40d, max_idle_ns: 440795254442 ns
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6147.28 BogoMIPS (lpj=30736440)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000044] LSM: Security Framework initializing
[    0.000048] Yama: becoming mindful.
[    0.000083] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000111] *** VALIDATE tmpfs ***
[    0.000270] *** VALIDATE proc ***
[    0.000325] *** VALIDATE cgroup1 ***
[    0.000326] *** VALIDATE cgroup2 ***
[    0.000370] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.000382] process: using mwait in idle threads
[    0.000385] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.000386] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.000388] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.000390] Spectre V2 : Mitigation: Full generic retpoline
[    0.000390] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.000391] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.000392] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.000393] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.000394] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.000396] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.000578] Freeing SMP alternatives memory: 32K
[    0.136239] smpboot: CPU0: Intel(R) Core(TM) i7 CPU         950  @ 3.07GHz (family: 0x6, model: 0x1a, stepping: 0x5)
[    0.136384] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
[    0.136390] core: CPU erratum AAJ80 worked around
[    0.136391] core: CPUID marked event: 'bus cycles' unavailable
[    0.136392] ... version:                3
[    0.136392] ... bit width:              48
[    0.136393] ... generic registers:      4
[    0.136393] ... value mask:             0000ffffffffffff
[    0.136394] ... max period:             000000007fffffff
[    0.136394] ... fixed-purpose events:   3
[    0.136395] ... event mask:             000000070000000f
[    0.136440] rcu: Hierarchical SRCU implementation.
[    0.137567] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.137717] smp: Bringing up secondary CPUs ...
[    0.137832] x86: Booting SMP configuration:
[    0.137833] .... node  #0, CPUs:        #1  #2  #3  #4
[    0.142391] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.142391]   #5  #6  #7
[    0.150053] smp: Brought up 1 node, 8 CPUs
[    0.150053] smpboot: Max logical packages: 2
[    0.150053] smpboot: Total of 8 processors activated (49178.30 BogoMIPS)
[    0.154373] devtmpfs: initialized
[    0.154373] x86/mm: Memory block size: 128MB
[    0.154373] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
[    0.154373] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.154373] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.154373] pinctrl core: initialized pinctrl subsystem
[    0.154373] PM: RTC time: 11:15:27, date: 2020-05-01
[    0.154373] NET: Registered protocol family 16
[    0.154373] cpuidle: using governor ladder
[    0.154373] cpuidle: using governor menu
[    0.154373] ACPI: bus type PCI registered
[    0.154373] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.154373] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.154373] PCI: not using MMCONFIG
[    0.154373] PCI: Using configuration type 1 for base access
[    0.154373] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.160113] ACPI: Added _OSI(Module Device)
[    0.160114] ACPI: Added _OSI(Processor Device)
[    0.160114] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.160115] ACPI: Added _OSI(Processor Aggregator Device)
[    0.160116] ACPI: Added _OSI(Linux-Dell-Video)
[    0.160117] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.160117] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.167760] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.181304] ACPI: Dynamic OEM Table Load:
[    0.181304] ACPI: SSDT 0xFFFF9E96F5F8C000 00202C (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.190571] ACPI: Interpreter enabled
[    0.190590] ACPI: (supports S0 S1 S3 S4 S5)
[    0.190591] ACPI: Using IOAPIC for interrupt routing
[    0.190629] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.191901] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.191916] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.192125] ACPI: Enabled 13 GPEs in block 00 to 3F
[    0.199801] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.199805] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI HPX-Type3]
[    0.199809] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND)
[    0.200146] PCI host bridge to bus 0000:00
[    0.200148] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.200149] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.200151] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.200152] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.200153] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.200154] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[    0.200155] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.200166] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[    0.200193] pci 0000:00:00.0: enabling Extended Tags
[    0.200224] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.200321] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[    0.200346] pci 0000:00:01.0: enabling Extended Tags
[    0.200379] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.200489] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[    0.200515] pci 0000:00:02.0: enabling Extended Tags
[    0.200547] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.200649] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[    0.200674] pci 0000:00:03.0: enabling Extended Tags
[    0.200707] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.200814] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[    0.200841] pci 0000:00:07.0: enabling Extended Tags
[    0.200875] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.200984] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[    0.201103] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[    0.201219] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[    0.201336] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[    0.201442] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.201481] pci 0000:00:1a.0: reg 0x20: [io  0xb800-0xb81f]
[    0.201602] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    0.201641] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
[    0.201762] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    0.201800] pci 0000:00:1a.2: reg 0x20: [io  0xbc00-0xbc1f]
[    0.201926] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.201946] pci 0000:00:1a.7: reg 0x10: [mem 0xf9eff000-0xf9eff3ff]
[    0.202019] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.202118] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.202193] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.202299] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[    0.202373] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.202481] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.202520] pci 0000:00:1d.0: reg 0x20: [io  0xb080-0xb09f]
[    0.202648] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.202687] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
[    0.202808] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.202846] pci 0000:00:1d.2: reg 0x20: [io  0xb480-0xb49f]
[    0.202974] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.202993] pci 0000:00:1d.7: reg 0x10: [mem 0xf9efe000-0xf9efe3ff]
[    0.203067] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.203166] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.203306] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    0.203380] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.203383] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.203386] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.203502] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    0.203517] pci 0000:00:1f.2: reg 0x10: [io  0xac00-0xac07]
[    0.203523] pci 0000:00:1f.2: reg 0x14: [io  0xa880-0xa883]
[    0.203530] pci 0000:00:1f.2: reg 0x18: [io  0xa800-0xa807]
[    0.203536] pci 0000:00:1f.2: reg 0x1c: [io  0xa480-0xa483]
[    0.203542] pci 0000:00:1f.2: reg 0x20: [io  0xa400-0xa41f]
[    0.203548] pci 0000:00:1f.2: reg 0x24: [mem 0xf9efc000-0xf9efc7ff]
[    0.203584] pci 0000:00:1f.2: PME# supported from D3hot
[    0.203678] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.203694] pci 0000:00:1f.3: reg 0x10: [mem 0xf9efd000-0xf9efd0ff 64bit]
[    0.203711] pci 0000:00:1f.3: reg 0x20: [io  0x1000-0x101f]
[    0.203826] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.203871] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[    0.203893] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[    0.203977] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.204038] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.204042] pci 0000:00:02.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
[    0.204072] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.204113] pci 0000:04:00.0: [10de:1c82] type 00 class 0x030000
[    0.204132] pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.204141] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.204151] pci 0000:04:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.204157] pci 0000:04:00.0: reg 0x24: [io  0xcc00-0xcc7f]
[    0.204164] pci 0000:04:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[    0.204242] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:07.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.204277] pci 0000:04:00.1: [10de:0fb9] type 00 class 0x040300
[    0.204292] pci 0000:04:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[    0.204401] pci 0000:00:07.0: PCI bridge to [bus 04]
[    0.204404] pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
[    0.204406] pci 0000:00:07.0:   bridge window [mem 0xfa000000-0xfbcfffff]
[    0.204409] pci 0000:00:07.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.204442] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.204449] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.204496] pci 0000:05:00.0: [11ab:4364] type 00 class 0x020000
[    0.204525] pci 0000:05:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[    0.204536] pci 0000:05:00.0: reg 0x18: [io  0xd800-0xd8ff]
[    0.204574] pci 0000:05:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref]
[    0.204638] pci 0000:05:00.0: supports D1 D2
[    0.204639] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.204698] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.204701] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.204703] pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.204721] pci_bus 0000:07: extended config space not accessible
[    0.204738] pci 0000:07:00.0: [1102:0004] type 00 class 0x040100
[    0.204752] pci 0000:07:00.0: reg 0x10: [io  0xe880-0xe8bf]
[    0.204818] pci 0000:07:00.0: supports D1 D2
[    0.204852] pci 0000:07:00.1: [1102:7003] type 00 class 0x098000
[    0.204865] pci 0000:07:00.1: reg 0x10: [io  0xec00-0xec07]
[    0.204931] pci 0000:07:00.1: supports D1 D2
[    0.204964] pci 0000:07:00.2: [1102:4001] type 00 class 0x0c0010
[    0.204980] pci 0000:07:00.2: reg 0x10: [mem 0xfbeff800-0xfbefffff]
[    0.204988] pci 0000:07:00.2: reg 0x14: [mem 0xfbef8000-0xfbefbfff]
[    0.205050] pci 0000:07:00.2: supports D1 D2
[    0.205052] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
[    0.205120] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.205123] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.205126] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.205130] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.205131] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.205133] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.205134] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.205135] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.205136] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[    0.205791] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.205856] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.205921] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.205985] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.206049] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.206113] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.206177] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.206242] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[    0.206360] iommu: Default domain type: Translated
[    0.206377] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.206377] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.206377] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.206377] vgaarb: loaded
[    0.206377] ACPI: bus type USB registered
[    0.206377] usbcore: registered new interface driver usbfs
[    0.206377] usbcore: registered new interface driver hub
[    0.206377] usbcore: registered new device driver usb
[    0.206377] pps_core: LinuxPPS API ver. 1 registered
[    0.206377] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.206377] PTP clock support registered
[    0.206377] EDAC MC: Ver: 3.0.0
[    0.206377] PCI: Using ACPI for IRQ routing
[    0.211966] PCI: Discovered peer bus ff
[    0.211967] PCI: root bus ff: using default resources
[    0.211968] PCI: Probing PCI hardware (bus ff)
[    0.211985] PCI host bridge to bus 0000:ff
[    0.211986] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    0.211987] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[    0.211989] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    0.211990] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.211994] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[    0.212029] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[    0.212066] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[    0.212097] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[    0.212129] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[    0.212160] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[    0.212192] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[    0.212224] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[    0.212257] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[    0.212290] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[    0.212324] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[    0.212357] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[    0.212388] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[    0.212419] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[    0.212450] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[    0.212483] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[    0.212517] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[    0.212548] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[    0.212582] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[    0.212622] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    0.212624] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.212628] PCI: pci_cache_line_size set to 64 bytes
[    0.212693] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.212694] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[    0.212777] NetLabel: Initializing
[    0.212777] NetLabel:  domain hash size = 128
[    0.212778] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.212795] NetLabel:  unlabeled traffic allowed by default
[    0.212802] hpet: 4 channels of 0 reserved for per-cpu timers
[    0.212802] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.212802] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.212802] clocksource: Switched to clocksource tsc-early
[    0.220360] *** VALIDATE bpf ***
[    0.220437] VFS: Disk quotas dquot_6.6.0
[    0.220455] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.220474] *** VALIDATE ramfs ***
[    0.220477] *** VALIDATE hugetlbfs ***
[    0.220512] pnp: PnP ACPI init
[    0.220597] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[    0.220599] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.220600] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.220602] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.220603] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[    0.220605] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[    0.220609] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.220675] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.220897] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.220901] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221160] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.221162] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.221163] system 00:03: [io  0x0500-0x057f] could not be reserved
[    0.221165] system 00:03: [io  0x0600-0x0607] has been reserved
[    0.221167] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.221168] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.221169] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.221173] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221308] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.221311] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221446] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.221448] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.221451] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221565] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.221569] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221763] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.221765] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.221766] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.221768] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.221769] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.221773] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.221920] pnp: PnP ACPI: found 8 devices
[    0.223029] thermal_sys: Registered thermal governor 'fair_share'
[    0.223030] thermal_sys: Registered thermal governor 'bang_bang'
[    0.223031] thermal_sys: Registered thermal governor 'step_wise'
[    0.223031] thermal_sys: Registered thermal governor 'user_space'
[    0.223032] thermal_sys: Registered thermal governor 'power_allocator'
[    0.227564] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.227600] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[    0.227602] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000 add_align 100000
[    0.227604] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.227613] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[    0.227617] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.227619] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.227621] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.227628] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.227631] pci 0000:00:02.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
[    0.227635] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.227641] pci 0000:00:07.0: PCI bridge to [bus 04]
[    0.227643] pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
[    0.227646] pci 0000:00:07.0:   bridge window [mem 0xfa000000-0xfbcfffff]
[    0.227648] pci 0000:00:07.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.227652] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.227654] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.227657] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
[    0.227660] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.227664] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.227666] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.227669] pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.227671] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.227676] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.227678] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.227681] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.227687] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.227688] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.227689] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.227690] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.227692] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.227693] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.227694] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[    0.227695] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.227696] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbcfffff]
[    0.227697] pci_bus 0000:04: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.227699] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.227700] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[    0.227701] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.227702] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.227703] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.227704] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.227705] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.227706] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.227707] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.227709] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.227710] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.227711] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.227712] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.227713] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.227763] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.227764] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.227794] NET: Registered protocol family 2
[    0.227976] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.228033] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.228197] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.228297] TCP: Hash tables configured (established 65536 bind 65536)
[    0.228346] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.228379] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.228443] NET: Registered protocol family 1
[    0.228447] NET: Registered protocol family 44
[    0.230140] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.230151] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.230187] PCI: CLS 256 bytes, default 64
[    0.230300] Trying to unpack rootfs image as initramfs...
[    0.359139] Freeing initrd memory: 12648K
[    0.359165] DMAR: Host address width 39
[    0.359166] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
[    0.359179] DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
[    0.359181] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
[    0.359181] DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff
[    0.359182] DMAR: ATSR flags: 0x0
[    0.416939] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.416941] software IO TLB: mapped [mem 0xbb780000-0xbf780000] (64MB)
[    0.417106] check: Scanning for low memory corruption every 60 seconds
[    0.417485] Initialise system trusted keyrings
[    0.417493] Key type blacklist registered
[    0.417529] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.418656] zbud: loaded
[    0.423132] Key type asymmetric registered
[    0.423133] Asymmetric key parser 'x509' registered
[    0.423147] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.423188] io scheduler mq-deadline registered
[    0.423189] io scheduler kyber registered
[    0.423215] io scheduler bfq registered
[    0.423636] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.424022] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.424088] intel_idle: MWAIT substates: 0x1120
[    0.424089] intel_idle: v0.4.1 model 0x1A
[    0.424346] intel_idle: lapic_timer_reliable_states 0x2
[    0.424397] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.424415] ACPI: Power Button [PWRB]
[    0.424445] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.424584] ACPI: Power Button [PWRF]
[    0.425238] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.426236] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.426236] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.427317] usbcore: registered new interface driver usbserial_generic
[    0.427321] usbserial: USB Serial support registered for generic
[    0.427338] rtc_cmos 00:01: RTC can wake from S4
[    0.427595] rtc_cmos 00:01: registered as rtc0
[    0.427610] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.427647] intel_pstate: CPU model not supported
[    0.427898] ledtrig-cpu: registered to indicate activity on CPUs
[    0.427939] drop_monitor: Initializing network drop monitor service
[    0.428086] NET: Registered protocol family 10
[    0.434820] Segment Routing with IPv6
[    0.434838] NET: Registered protocol family 17
[    0.435776] RAS: Correctable Errors collector initialized.
[    0.435848] microcode: sig=0x106a5, pf=0x2, revision=0x1d
[    0.436116] microcode: Microcode Update Driver: v2.2.
[    0.436119] IPI shorthand broadcast: enabled
[    0.436126] sched_clock: Marking stable (496107322, -59995318)->(459775402, -23663398)
[    0.436295] registered taskstats version 1
[    0.436300] Loading compiled-in X.509 certificates
[    0.439914] Loaded X.509 cert 'Build time autogenerated kernel key: 4dedd4ee17eacad176637c178d9c6431c3bbadfb'
[    0.439947] zswap: loaded using pool lzo/zbud
[    0.440191] Key type ._fscrypt registered
[    0.440192] Key type .fscrypt registered
[    0.446260] Key type big_key registered
[    0.446580] PM:   Magic number: 4:951:275
[    0.446584] misc udmabuf: hash matches
[    0.446598] tty tty12: hash matches
[    0.446607] edac mc: hash matches
[    0.446707] rtc_cmos 00:01: setting system clock to 2020-05-01T11:15:28 UTC (1588331728)
[    0.448004] Freeing unused decrypted memory: 2040K
[    0.448339] Freeing unused kernel image memory: 1724K
[    0.614286] Write protecting the kernel read-only data: 18432k
[    0.614903] Freeing unused kernel image memory: 2012K
[    0.615056] Freeing unused kernel image memory: 56K
[    0.627570] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.627646] x86/mm: Checking user space page tables
[    0.639984] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.639986] Run /init as init process
[    0.713515] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.714992] ehci-pci: EHCI PCI platform driver
[    0.715220] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.715227] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.715238] ehci-pci 0000:00:1a.7: debug port 1
[    0.719141] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[    0.719159] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9eff000
[    0.724320] SCSI subsystem initialized
[    0.731134] libata version 3.00 loaded.
[    0.734429] ahci 0000:00:1f.2: version 3.0
[    0.734624] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.734658] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.734660] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
[    0.744158] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.744380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.744381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.744383] usb usb1: Product: EHCI Host Controller
[    0.744384] usb usb1: Manufacturer: Linux 5.4.36-1-lts ehci_hcd
[    0.744385] usb usb1: SerialNumber: 0000:00:1a.7
[    0.744537] hub 1-0:1.0: USB hub found
[    0.744601] hub 1-0:1.0: 6 ports detected
[    0.745159] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.745165] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.745259] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[    0.745519] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.745520] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.745522] usb usb2: Product: xHCI Host Controller
[    0.745523] usb usb2: Manufacturer: Linux 5.4.36-1-lts xhci-hcd
[    0.745524] usb usb2: SerialNumber: 0000:02:00.0
[    0.745674] hub 2-0:1.0: USB hub found
[    0.745689] hub 2-0:1.0: 2 ports detected
[    0.745888] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.745892] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    0.745901] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.745902] ehci-pci 0000:00:1d.7: debug port 1
[    0.745903] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    0.745906] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[    0.748655] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.748690] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.748691] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.748693] usb usb4: Product: xHCI Host Controller
[    0.748694] usb usb4: Manufacturer: Linux 5.4.36-1-lts xhci-hcd
[    0.748695] usb usb4: SerialNumber: 0000:02:00.0
[    0.748831] hub 4-0:1.0: USB hub found
[    0.748845] hub 4-0:1.0: 2 ports detected
[    0.749808] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[    0.749821] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9efe000
[    0.774286] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.774705] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.774709] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.774711] usb usb3: Product: EHCI Host Controller
[    0.774713] usb usb3: Manufacturer: Linux 5.4.36-1-lts ehci_hcd
[    0.774715] usb usb3: SerialNumber: 0000:00:1d.7
[    0.775036] hub 3-0:1.0: USB hub found
[    0.775107] hub 3-0:1.0: 6 ports detected
[    0.777791] uhci_hcd: USB Universal Host Controller Interface driver
[    0.777963] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.777967] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    0.777973] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.777995] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.778061] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.778063] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.778064] usb usb5: Product: UHCI Host Controller
[    0.778065] usb usb5: Manufacturer: Linux 5.4.36-1-lts uhci_hcd
[    0.778066] usb usb5: SerialNumber: 0000:00:1a.0
[    0.778205] hub 5-0:1.0: USB hub found
[    0.778218] hub 5-0:1.0: 2 ports detected
[    0.778653] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.778657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[    0.778662] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.778684] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.778767] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.778768] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.778769] usb usb6: Product: UHCI Host Controller
[    0.778770] usb usb6: Manufacturer: Linux 5.4.36-1-lts uhci_hcd
[    0.778771] usb usb6: SerialNumber: 0000:00:1a.1
[    0.778959] hub 6-0:1.0: USB hub found
[    0.778973] hub 6-0:1.0: 2 ports detected
[    0.779280] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.779284] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[    0.779289] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.779309] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[    0.779424] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.779426] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.779427] usb usb7: Product: UHCI Host Controller
[    0.779428] usb usb7: Manufacturer: Linux 5.4.36-1-lts uhci_hcd
[    0.779429] usb usb7: SerialNumber: 0000:00:1a.2
[    0.779581] hub 7-0:1.0: USB hub found
[    0.779594] hub 7-0:1.0: 2 ports detected
[    0.779921] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.779927] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    0.779932] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.779948] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.780009] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.780011] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.780012] usb usb8: Product: UHCI Host Controller
[    0.780013] usb usb8: Manufacturer: Linux 5.4.36-1-lts uhci_hcd
[    0.780014] usb usb8: SerialNumber: 0000:00:1d.0
[    0.780146] hub 8-0:1.0: USB hub found
[    0.780160] hub 8-0:1.0: 2 ports detected
[    0.780423] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.780427] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    0.780432] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.780447] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.780512] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.780513] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.780514] usb usb9: Product: UHCI Host Controller
[    0.780515] usb usb9: Manufacturer: Linux 5.4.36-1-lts uhci_hcd
[    0.780516] usb usb9: SerialNumber: 0000:00:1d.1
[    0.780650] hub 9-0:1.0: USB hub found
[    0.780662] hub 9-0:1.0: 2 ports detected
[    0.780917] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.780921] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    0.780926] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.780942] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.781001] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.781002] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.781003] usb usb10: Product: UHCI Host Controller
[    0.781005] usb usb10: Manufacturer: Linux 5.4.36-1-lts uhci_hcd
[    0.781006] usb usb10: SerialNumber: 0000:00:1d.2
[    0.781131] hub 10-0:1.0: USB hub found
[    0.781144] hub 10-0:1.0: 2 ports detected
[    0.784317] firewire_ohci 0000:07:00.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    0.894712] scsi host0: ahci
[    0.894833] scsi host1: ahci
[    0.894914] scsi host2: ahci
[    0.895000] scsi host3: ahci
[    0.895074] scsi host4: ahci
[    0.895203] scsi host5: ahci
[    0.895260] ata1: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc100 irq 31
[    0.895261] ata2: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc180 irq 31
[    0.895263] ata3: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc200 irq 31
[    0.895264] ata4: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc280 irq 31
[    0.895266] ata5: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc300 irq 31
[    0.895267] ata6: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc380 irq 31
[    1.310237] firewire_core 0000:07:00.2: created device fw0: GUID 00023c01510e311f, S400
[    1.360169] usb 9-1: new low-speed USB device number 2 using uhci_hcd
[    1.360180] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[    1.420121] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.421254] ata1.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
[    1.421257] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    1.422569] ata1.00: configured for UDMA/133
[    1.422773] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
[    1.470082] tsc: Refined TSC clocksource calibration: 3073.644 MHz
[    1.470093] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c4e063b40d, max_idle_ns: 440795254442 ns
[    1.470165] clocksource: Switched to clocksource tsc
[    1.580530] usb 9-1: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20
[    1.580533] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.580535] usb 9-1: Product: USB-PS/2 Optical Mouse
[    1.580537] usb 9-1: Manufacturer: Logitech
[    1.581386] usb 7-1: New USB device found, idVendor=05e3, idProduct=0681, bcdDevice= 1.00
[    1.581390] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.581392] usb 7-1: Product: GameCube to USB convertor
[    1.581394] usb 7-1: Manufacturer: Austgame
[    1.587203] hidraw: raw HID events driver (C) Jiri Kosina
[    1.626529] usbcore: registered new interface driver usbhid
[    1.626530] usbhid: USB HID core driver
[    1.628294] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/0003:046D:C050.0001/input/input2
[    1.628326] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[    1.628436] input: Austgame GameCube to USB convertor as /devices/pci0000:00/0000:00:1a.2/usb7/7-1/7-1:1.0/0003:05E3:0681.0002/input/input3
[    1.628491] hid-generic 0003:05E3:0681.0002: input,hiddev0,hidraw1: USB HID v1.00 Joystick [Austgame GameCube to USB convertor] on usb-0000:00:1a.2-1/input0
[    1.720120] random: fast init done
[    1.753264] ata2: SATA link down (SStatus 0 SControl 300)
[    2.250119] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.250411] ata3.00: ATAPI: PLEXTOR DVDR   PX-880SA, 1.12, max UDMA/100
[    2.251291] ata3.00: configured for UDMA/100
[    2.253220] scsi 2:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-880SA  1.12 PQ: 0 ANSI: 5
[    2.340114] usb 9-2: new low-speed USB device number 3 using uhci_hcd
[    2.597525] usb 9-2: New USB device found, idVendor=413c, idProduct=2105, bcdDevice= 3.52
[    2.597528] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.597531] usb 9-2: Product: Dell USB Keyboard
[    2.597533] usb 9-2: Manufacturer: Dell
[    2.642999] ata4: SATA link down (SStatus 0 SControl 300)
[    2.665750] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/0003:413C:2105.0003/input/input4
[    2.730267] hid-generic 0003:413C:2105.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2/input0
[    2.973292] ata5: SATA link down (SStatus 0 SControl 300)
[    3.303298] ata6: SATA link down (SStatus 0 SControl 300)
[    3.307412] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.307434] sd 0:0:0:0: [sda] Write Protect is off
[    3.307437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.307471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.377586]  sda: sda1 sda2 sda3 sda4
[    3.378566] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.443170] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.443173] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.510493] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.257567] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    5.621187] systemd[1]: systemd 245.5-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.650264] systemd[1]: Detected architecture x86-64.
[    5.727962] systemd[1]: Set hostname to <PC1>.
[    7.188996] systemd[1]: /usr/lib/systemd/system/fancontrol.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid \xe2\x86\x92 /run/fancontrol.pid; please update the unit file accordingly.
[    7.220888] random: systemd: uninitialized urandom read (16 bytes read)
[    7.221676] systemd[1]: Created slice system-getty.slice.
[    7.221708] random: systemd: uninitialized urandom read (16 bytes read)
[    7.221912] systemd[1]: Created slice system-modprobe.slice.
[    7.221924] random: systemd: uninitialized urandom read (16 bytes read)
[    7.222118] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.222386] systemd[1]: Created slice User and Session Slice.
[    7.222440] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.222489] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.222653] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.222685] systemd[1]: Reached target Local Encrypted Volumes.
[    7.222700] systemd[1]: Reached target Login Prompts.
[    7.222720] systemd[1]: Reached target Paths.
[    7.222735] systemd[1]: Reached target Remote File Systems.
[    7.222749] systemd[1]: Reached target Slices.
[    7.222813] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.232520] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.232861] systemd[1]: Listening on LVM2 poll daemon socket.
[    7.234409] systemd[1]: Listening on Process Core Dump Socket.
[    7.234461] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.268975] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[    7.269125] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.269221] systemd[1]: Listening on Journal Socket.
[    7.280113] systemd[1]: Listening on udev Control Socket.
[    7.280188] systemd[1]: Listening on udev Kernel Socket.
[    7.280936] systemd[1]: Mounting Huge Pages File System...
[    7.281715] systemd[1]: Mounting POSIX Message Queue File System...
[    7.282533] systemd[1]: Mounting Kernel Debug File System...
[    7.283355] systemd[1]: Mounting Kernel Trace File System...
[    7.284415] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    7.285241] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    7.286284] systemd[1]: Starting Load Kernel Module drm...
[    7.331203] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    7.331266] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    7.332528] systemd[1]: Starting Journal Service...
[    7.415891] systemd[1]: Starting Load Kernel Modules...
[    7.416811] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.417523] systemd[1]: Starting udev Coldplug all Devices...
[    7.418662] systemd[1]: Mounted Huge Pages File System.
[    7.418779] systemd[1]: Mounted POSIX Message Queue File System.
[    7.418881] systemd[1]: Mounted Kernel Debug File System.
[    7.418987] systemd[1]: Mounted Kernel Trace File System.
[    7.419373] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    7.448278] Linux agpgart interface v0.103
[    7.468183] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    7.469074] systemd[1]: Finished Remount Root and Kernel File Systems.
[    7.469167] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    7.571085] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    7.571864] systemd[1]: Starting Load/Save Random Seed...
[    7.571891] systemd[1]: Condition check resulted in Create System Users being skipped.
[    7.572554] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.573483] systemd[1]: Started LVM2 metadata daemon.
[    7.589095] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.589165] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    7.649598] systemd[1]: Finished udev Coldplug all Devices.
[    7.658858] systemd[1]: modprobe@drm.service: Succeeded.
[    7.659262] systemd[1]: Finished Load Kernel Module drm.
[    7.696102] systemd[1]: Started Journal Service.
[    7.736788] systemd-journald[318]: Received client request to flush runtime journal.
[    7.841701] gameport gameport0: EMU10K1 is pci0000:07:00.1/gameport0, io 0xec00, speed 933kHz
[    7.920417] input: Microsoft SideWinder GamePad as /devices/pci0000:00/0000:00:1e.0/0000:07:00.1/gameport0/input/input5
[    9.080457] i5500_temp 0000:00:14.3: Sensor seems to be disabled
[    9.080972] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[    9.081005] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[    9.081021] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[    9.159132] ACPI Warning: SystemIO range 0x0000000000001000-0x000000000000101F conflicts with OpRegion 0x0000000000001000-0x000000000000100F (\SMRG) (20190816/utaddress-204)
[    9.159138] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.321494] sky2: driver version 1.30
[    9.321587] sky2 0000:05:00.0: Yukon-2 EC Ultra chip revision 3
[    9.321780] sky2 0000:05:00.0 eth0: addr 20:cf:30:3e:61:8a
[    9.356682] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    9.358624] mousedev: PS/2 mouse device common for all mice
[    9.604905] IPMI message handler: version 39.2
[    9.620368] ipmi device interface
[    9.830438] sky2 0000:05:00.0 enp5s0: renamed from eth0
[    9.880143] Adding 8388604k swap on /dev/sda2.  Priority:-2 extents:1 across:8388604k FS
[   10.497034] snd_emu10k1 0000:07:00.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[   10.650106] random: crng init done
[   10.650108] random: 7 urandom warning(s) missed due to ratelimiting
[   11.561198] nvidia: loading out-of-tree module taints kernel.
[   11.561207] nvidia: module license 'NVIDIA' taints kernel.
[   11.561207] Disabling lock debugging due to kernel taint
[   11.568067] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   11.577467] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[   11.578092] nvidia 0000:04:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[   11.666674] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   11.678298] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  440.82  Wed Apr  1 20:04:33 UTC 2020
[   11.826621] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  440.82  Wed Apr  1 19:41:29 UTC 2020
[   11.842016] EXT4-fs (sda1): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl
[   11.895694] [drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
[   11.895697] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:04:00.0 on minor 0
[   11.986344] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[   12.758119] w83627ehf: Found W83667HG chip at 0x290
[   12.758142] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB.PCI0.SBRG.SIOR.HWRE) (20190816/utaddress-204)
[   12.758146] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.646875] 8021q: 802.1Q VLAN Support v1.8
[   13.838260] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.863440] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   14.115710] sky2 0000:05:00.0 enp5s0: enabling interface
[   15.799159] sky2 0000:05:00.0 enp5s0: Link is up at 100 Mbps, full duplex, flow control both
[   15.799182] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[   19.205742] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[   19.205933] caller _nv000908rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[   23.238343] fuse: init (API version 7.31)
[   23.238383] *** VALIDATE fuse ***
[   23.238387] *** VALIDATE fuse ***
[ 1009.419790] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79900
[ 1312.490257] perf: interrupt took too long (3188 > 3126), lowering kernel.perf_event_max_sample_rate to 62700
[ 1721.371346] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 1721.507286] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 1721.511667] systemd-journald[318]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 1721.641438] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 1721.645386] systemd-shutdown[1]: Unmounting file systems.
[ 1721.646319] [71776]: Remounting '/' read-only in with options '(null)'.
[ 1721.723956] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 1721.730522] systemd-shutdown[1]: All filesystems unmounted.
[ 1721.730528] systemd-shutdown[1]: Deactivating swaps.
[ 1721.730590] systemd-shutdown[1]: All swaps deactivated.
[ 1721.730594] systemd-shutdown[1]: Detaching loop devices.
[ 1721.730733] systemd-shutdown[1]: All loop devices detached.
[ 1721.730738] systemd-shutdown[1]: Detaching DM devices.
[ 1721.730822] systemd-shutdown[1]: All DM devices detached.
[ 1721.730827] systemd-shutdown[1]: All filesystems, swaps, loop devices and DM devices detached.
[ 1721.907288] EXT4-fs (sda3): re-mounted. Opts: data=ordered
 



moi, ce qui me chagine c'est ça (je ne sais pas ce que ça veut dire) :


[ 1009.419790] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79900
[ 1312.490257] perf: interrupt took too long (3188 > 3126), lowering kernel.perf_event_max_sample_rate to 62700
 

Dernière modification par Anonyme (01-05-2020 12:59:15)

#6 02-05-2020 13:17:28

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Anonyme a écrit :

moi, ce qui me chagine c'est ça (je ne sais pas ce que ça veut dire) :


[ 1009.419790] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79900
[ 1312.490257] perf: interrupt took too long (3188 > 3126), lowering kernel.perf_event_max_sample_rate to 62700



Ce n'est pas grave, j'ai les mêmes. C'est un système très pointu de mesures de performances du noyau.
Je ne sais pas trop à quoi ça sert…

Hors ligne

#7 02-05-2020 17:16:04

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Bonjour

Merci enicar

OK wink

Je viens de voir que j'ai passé en résolu sans vraiment mettre la solution.

C'est les services LVM2

J'ai désactivé et masqué tous ce qui si rapproche.


lvm2-activation-early.service masked disabled    
lvm2-activation-net.service   masked disabled    
lvm2-activation.service       masked disabled    
lvm2-lvmetad.service          masked disabled    
lvm2-lvmpolld.service         masked disabled    
lvm2-monitor.service          masked disabled    
lvm2-pvscan@.service          masked disabled    
lvm2-lvmetad.socket           masked disabled    
lvm2-lvmpolld.socket          masked disabled  
 



un config dans /etc/lvm ou j'ai passé une option à 0

et un

sudo systemctl mask systemd-udev-settle



et tout ça sans trop savoir le risque.

La seule chose que j'ai compris, c'est que j'en ai pas "besoin"

ça me pompait tellement que j'y suis allé à l'arrache comme un bourrin mad

Le but, c'est que ça fonctionne et que j'ai rien compris à quoi servait LVM .


systemd-analyze blame



( Maintenant c'est udisks2.service qui est plus long de 2 secondes )



5.793s udisks2.service                  
3.334s systemd-random-seed.service      
2.901s polkit.service                    
2.467s dev-sda3.device                  
1.757s NetworkManager.service            
1.582s upower.service                    
1.505s systemd-logind.service            
1.430s dhcpcd.service                    
1.044s systemd-journal-flush.service    
 806ms systemd-udevd.service            
 711ms systemd-tmpfiles-setup-dev.service
 482ms systemd-fsck@dev-sda1.service    
 460ms systemd-modules-load.service      
 446ms lm_sensors.service                
 388ms systemd-journald.service          
 341ms modprobe@drm.service              
 340ms systemd-tmpfiles-setup.service    
 268ms boot.mount                        
 224ms systemd-udev-trigger.service      
 222ms systemd-fsck@dev-sda4.service    
 156ms user@1000.service                
 124ms lightdm.service                  
 114ms alsa-restore.service              
 105ms dev-sda2.swap                    
 105ms home.mount                        
  89ms systemd-tmpfiles-clean.service    
  78ms dev-hugepages.mount              
  77ms dev-mqueue.mount                  
  77ms sys-kernel-debug.mount            
  76ms sys-kernel-tracing.mount          
  75ms kmod-static-nodes.service        
  73ms systemd-sysctl.service            
  59ms systemd-update-utmp.service      
  52ms tmp.mount                        
  44ms systemd-remount-fs.service        
  23ms user-runtime-dir@1000.service    
  17ms systemd-user-sessions.service    
   7ms sys-fs-fuse-connections.mount    
   1ms sys-kernel-config.mount
 




mais là c'est quand même mieux que 25 :


systemd-analyze
 




Startup finished in 5.211s (kernel) + 8.503s (userspace) = 13.715s
graphical.target reached after 8.276s in userspace
 

Dernière modification par Anonyme (02-05-2020 17:30:30)

#8 02-05-2020 17:56:36

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

LVM wink

Hors ligne

#9 02-05-2020 18:05:21

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

vigen a écrit :



Donc pas utile pour moi ce truc je pense tongue

#10 02-05-2020 19:05:43

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

LVM c'est un super système, je l'utilise depuis 2007. Ça me permet de faire évoluer la taille
de mes « partitions = volumes logiques » à chaud. Ça me permet aussi d'agréger 2 disques durs
et d'avoir mes volumes logiques comme si je n'avais qu'un seul disque.

Après c'est un choix lors de l'installation. Évidemment je pourrais faire sans. En 2007, j'ai juste voulu essayer,
c'était le choix proposé par défaut lors de l'installation de je ne sais plus quelle version de debian wink
Depuis, j'ai appris à m'en servir et j'ai gardé cette façon de faire. Ça fait aussi un truc de plus à apprendre.
Je comprends qu'on n'ait pas envie de l'utiliser.

Hors ligne

#11 02-05-2020 19:24:46

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

@enicar

de toute façon, je viens de remettre ma sauvegarde car je ne sais pas si c'est une impression, mais sans LVM, mon bureau est moins réactif.
Un exemple à ma connection, un fond noir de 3 secondes puis mon beau fond d'écran....

Je ne sais pas si c'est lié, mais en tout cas c'est un constat smile
Ça glisse, c'est rapide ...

Dernière modification par Anonyme (02-05-2020 19:26:20)

#12 02-05-2020 19:31:47

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Anonyme a écrit :

ais sans LVM, mon bureau est moins réactif.


Ça n'a rien à voir. Soit tu utilises LVM car ton système a été initialisé pour cela.
Soit tu as fait un partitionnement classique auquel cas LVM ne te sert effectivement
à rien.
Ça se fait lors de l'installation après c'est trop tard à moins de tout refaire.
Donc je ne sais pas ce que tu imagines à ce sujet…
Pour savoir tu peux faire :


fdisk -l
 


Une partition initialisée pour LVM devrait avoir un numéro d'id de 8e et un type Linux LVM.

Hors ligne

#13 02-05-2020 19:40:58

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).


Disque /dev/sda : 465,78 GiB, 500107862016 octets, 976773168 secteurs
Modèle de disque : WDC WD5000AAKS-0
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x9ab6949f

Périphérique Amorçage    Début       Fin Secteurs Taille Id Type
/dev/sda1    *            2048   1050623  1048576   512M 83 Linux
/dev/sda2              1050624  17827839 16777216     8G 82 partition d'échange Linux / Solaris
/dev/sda3             17827840  59770879 41943040    20G 83 Linux
/dev/sda4             59770880 156301487 96530608    46G 83 Linux
 



Mon problème, c'est ça en fait :

https://www.reddit.com/r/archlinux/comm … oot_fixed/

Dernière modification par Anonyme (02-05-2020 19:42:21)

#14 02-05-2020 19:45:31

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Bref tu n'as pas de partition en LVM, et donc tu n'as pas besoin de LVM…
Tu dois pouvoir purger le paquet lvm2. Quant à ton impression de ralentissement je ne sais
d'où ça peut venir mais certainement pas de là.

EDIT: pense à purger le paquet udisks2-lvm2 (il dépend de lvm2).

Dernière modification par enicar (02-05-2020 19:48:08)

Hors ligne

#15 02-05-2020 19:53:17

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Ben non tongue

Je peux rien faire smile

[patrick@PC1 Desktop]$
 sudo pacman -R  lvm2
[sudo] Mot de passe de patrick :
vérification des dépendances…
erreur : la préparation de la transaction a échoué (la satisfaction des dépendances a échoué)
:: la suppression de lvm2 casse la dépendance « lvm2 » requise par libblockdev



[patrick@PC1 Desktop]$ sudo pacman -R  lvm2 libblockdev
vérification des dépendances…
erreur : la préparation de la transaction a échoué (la satisfaction des dépendances a échoué)
:: la suppression de libblockdev casse la dépendance « libblockdev » requise par udisks2



[patrick@PC1 Desktop]$ sudo pacman -R  lvm2 libblockdev udisks2
vérification des dépendances…
erreur : la préparation de la transaction a échoué (la satisfaction des dépendances a échoué)
:: la suppression de udisks2 casse la dépendance « udisks2 » requise par gnome-disk-utility
:: la suppression de udisks2 casse la dépendance « udisks2 » requise par gvfs
[patrick@PC1 Desktop]$
 

#16 02-05-2020 19:58:06

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Non mais, c'est un faux problème de dépendance. Il suffit de supprimer libblockdev-lvm2.
Mais peut-être que ça va râler parce il existe un paquet libblock-dev-plugins-all qui les installe tous.
Il suffit de garder juste ceux dont tu as besoin. Dans aptitude en ncurses, ça se voit bien mais évidemment
je ne sais comment sont fichus les dépendances des paquets archlinux…

Hors ligne

#17 02-05-2020 20:01:13

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

ça, c'est bon :

sudo pacman -Rdd  lvm2





Paquets (1) lvm2-2.02.187-1

Taille totale supprimée :  6,66 MiB

:: Voulez-vous désinstaller ces paquets ? [O/n]
 

Dernière modification par Anonyme (02-05-2020 20:01:32)

#18 02-05-2020 20:12:54

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

enicar a écrit :

...je ne sais
d'où ça peut venir mais certainement pas de là.



Simple, j'ai dù virer un service qui ne fallait pas, .... un pro des conneries va pas changer à mon age. big_smile


Donc, désinstallation du paquet lvm2 par -Rdd

Un :

systemd-analyze




Startup finished in 5.584s (kernel) + 12.109s (userspace) = 17.694s
graphical.target reached after 9.059s in userspace
 





systemd-analyze blame
 




3.399s dev-sda3.device                      
3.399s systemd-random-seed.service          
3.012s accounts-daemon.service              
2.472s polkit.service                        
2.362s udisks2.service                      
1.771s upower.service                        
1.654s NetworkManager.service                
1.544s systemd-logind.service                
1.411s dhcpcd.service                        
1.069s systemd-journal-flush.service        
 979ms ldconfig.service                      
 880ms systemd-fsck@dev-sda1.service        
 744ms systemd-sysusers.service              
 652ms systemd-modules-load.service          
 624ms systemd-tmpfiles-setup-dev.service    
 548ms systemd-udevd.service                
 547ms systemd-tmpfiles-setup.service        
 453ms systemd-journald.service              
 394ms modprobe@drm.service                  
 319ms lm_sensors.service                    
 283ms systemd-udev-trigger.service          
 260ms boot.mount                            
 237ms home.mount                            
 229ms systemd-fsck@dev-sda4.service        
 188ms systemd-sysctl.service                
 171ms systemd-journal-catalog-update.service
 161ms tmp.mount                            
 139ms dev-sda2.swap                        
 130ms user@1000.service                    
 122ms lightdm.service                      
 115ms alsa-restore.service                  
  66ms systemd-update-utmp.service          
  62ms dev-hugepages.mount                  
  61ms dev-mqueue.mount                      
  60ms sys-kernel-debug.mount                
  59ms sys-kernel-tracing.mount              
  59ms kmod-static-nodes.service            
  36ms systemd-remount-fs.service            
  20ms systemd-user-sessions.service        
  16ms systemd-update-done.service          
  12ms user-runtime-dir@1000.service        
   5ms sys-fs-fuse-connections.mount        
   2ms sys-kernel-config.mount        
 



Plus de trace de lvm et un bureau toujours aussi réactif wink

Dernière modification par Anonyme (02-05-2020 20:15:44)

#19 02-05-2020 20:18:14

--gilles--
Membre
Lieu : Orléans - La Source
Distrib. : Debian 12
Noyau : Linux 6.1.0-26-amd64
(G)UI : Gnome - mutter 43.8-0+deb12u1
Inscription : 15-02-2016

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Anonyme, bonjour, je vois ceci dans tes messages d'erreur :

[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0

[    1.720120] random: fast init done

[    7.220888] random: systemd: uninitialized urandom read (16 bytes read)

[    7.221708] random: systemd: uninitialized urandom read (16 bytes read)

[    7.221924] random: systemd: uninitialized urandom read (16 bytes read)

[    7.571864] systemd[1]: Starting Load/Save Random Seed...

[   10.650106] random: crng init done

[   10.650108] random: 7 urandom warning(s) missed due to ratelimiting
 

10 secondes pour initialiser le générateur de nombres aléatoires cnrg après 7 warnings !


Chez moi :

dmesg  | grep random

[    0.189074] random: get_random_u64 called from __kmem_cache_create+0x3e/0x530 with crng_init=0
[    1.067065] random: fast init done
[    2.330405] random: lvm: uninitialized urandom read (4 bytes read)
[    2.364678] random: lvm: uninitialized urandom read (2 bytes read)
[    2.540566] random: lvm: uninitialized urandom read (4 bytes read)
[    3.947163] random: crng init done
[    3.948704] random: 1 urandom warning(s) missed due to ratelimiting

 


Si tout le monde pense pareil, c'est qu'aucune personne ne pense beaucoup.
 Intel® Core™2 Duo E8500  × 2
4,0 Gio DDR3 - 1333 MHz
Et si vous cherchiez votre solution dans le wiki => https://debian-facile.org/accueil palestine.png

En ligne

#20 02-05-2020 20:26:19

--gilles--
Membre
Lieu : Orléans - La Source
Distrib. : Debian 12
Noyau : Linux 6.1.0-26-amd64
(G)UI : Gnome - mutter 43.8-0+deb12u1
Inscription : 15-02-2016

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

J'ai trois fois plus de services démarrés que toi et mon démarrage dure à peu près la même durée. La génération des nombres aléatoires dure trop longtemps chez toi, tu devrais essayer d'installer le paquet haveged qui est prévu pour ces cas :

https://packages.debian.org/fr/buster/haveged

Si tout le monde pense pareil, c'est qu'aucune personne ne pense beaucoup.
 Intel® Core™2 Duo E8500  × 2
4,0 Gio DDR3 - 1333 MHz
Et si vous cherchiez votre solution dans le wiki => https://debian-facile.org/accueil palestine.png

En ligne

#21 02-05-2020 20:29:37

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Je viens juste de le faire suite à précédent post wink

Je regardes tout ça

#22 02-05-2020 21:00:34

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Changer clavier et souris (disque dur neuf)

sudo pacman -S haveged




sudo systemctl enable haveged
sudo systemctl start haveged
 






uname -r


5.4.36-1-lts



dmesg  | grep random





[    0.288582] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
[    1.982142] random: fast init done
[    7.260854] random: systemd: uninitialized urandom read (16 bytes read)
[    7.261668] random: systemd: uninitialized urandom read (16 bytes read)
[    7.261875] random: systemd: uninitialized urandom read (16 bytes read)
[    8.309361] random: crng init done
[    8.309363] random: 7 urandom warning(s) missed due to ratelimiting
 






uname -r


5.6.8-arch1-1



dmesg  | grep random




[    0.098628] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
[    2.735908] random: fast init done
[    6.145084] random: crng init done
 



Rien avec le kernel 5.6.8-arch1-1

smile

EDIT:
Sur le le kernel 5.6.8-arch1-1

systemd-analyze



Startup finished in 5.229s (kernel) + 10.927s (userspace) = 16.156s
graphical.target reached after 7.893s in userspace




systemd-analyze blame




2.994s accounts-daemon.service          
2.419s dev-sda3.device                  
2.396s polkit.service                    
2.213s udisks2.service                  
1.717s NetworkManager.service            
1.471s systemd-logind.service            
1.469s dhcpcd.service                    
1.417s upower.service                    
 912ms systemd-udevd.service            
 619ms systemd-fsck@dev-sda1.service    
 529ms systemd-fsck@dev-sda4.service    
 522ms systemd-journal-flush.service    
 512ms systemd-tmpfiles-setup.service    
 434ms systemd-modules-load.service      
 369ms systemd-tmpfiles-setup-dev.service
 339ms systemd-journald.service          
 302ms lm_sensors.service                
 247ms systemd-udev-trigger.service      
 229ms modprobe@drm.service              
 211ms systemd-random-seed.service      
 185ms dev-sda2.swap                    
 178ms home.mount                        
 171ms alsa-restore.service              
 131ms lightdm.service                  
 128ms user@1000.service                
 118ms boot.mount                        
  85ms systemd-remount-fs.service        
  55ms systemd-sysctl.service            
  54ms systemd-update-utmp.service      
  46ms dev-hugepages.mount              
  45ms dev-mqueue.mount                  
  45ms sys-kernel-debug.mount            
  44ms sys-kernel-tracing.mount          
  43ms kmod-static-nodes.service        
  31ms systemd-user-sessions.service    
  20ms tmp.mount                        
  16ms user-runtime-dir@1000.service    
   6ms sys-fs-fuse-connections.mount    
   2ms sys-kernel-config.mount
 



C'est un peu mieux :

Maintenant:


2.994s accounts-daemon.service          
2.419s dev-sda3.device
1.471s systemd-logind.service                  
2.396s polkit.service                    
2.213s udisks2.service
 



Avant:


3.399s dev-sda3.device                      
3.399s systemd-random-seed.service          
3.012s accounts-daemon.service              
2.472s polkit.service                        
2.362s udisks2.service  
 

Dernière modification par Anonyme (02-05-2020 21:14:12)

#23 04-05-2020 14:24:13

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Je confirme que maintenant le problème est bien résolu sur ma machine.
On désinstallant proprement lvm2 de mon ordinateur, ces reboot ou ces arrêts trainant en longueur n'ont plus recommencé.
Ce problème chez moi à commencé vers les kernels en versions 5.

ça pourra toujours servir, car sur ce problème, je ne suis pas le seul. smile

Résolu.

Dernière modification par Anonyme (04-05-2020 14:24:45)

#24 16-07-2020 16:33:06

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

Bonjour

Je rajoute tout de même le même problème constaté pour les utilisateurs de Archlinux. C'est on jamais, ça peut sevir ( en fin de post ) :

http://frederic.bezies.free.fr/blog/?p= … ment-49440


modifie ton fichier system.conf (/etc/systemd/system.conf)
Remplace: #DefaultTimeoutStopSec=90s
par: DefaultTimeoutStopSec=30s
(Enlève bien le #) , c’est le minimum qu’on peut mettre)
 

#25 18-07-2020 11:22:10

Anonyme
Invité

Re : [Résolu] Problème aléatoire à l'extinction de la machine (Trop long).

C'est Before=shutdown.target dans le fichier usr/lib/systemd/system/lvm2-lvmetad.service qui manquait dans la version que j'avais lors de mon post smile

Pied de page des forums