logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 30-08-2020 18:33:18

sizy458
Membre
Distrib. : Debian 11
Noyau : 5.10.0-8-amd64
(G)UI : gnome
Inscription : 16-06-2018

gravure bdr 50gb

Bonjour,

Y a t'il moyen de savoir sous linux (debian) si mon graveur supporte la gravure de bdr 50gb ??



Pas d'Info ci dessous :


wodim /dev/sr0
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
Device was not specified. Trying to find an appropriate drive...
Detected CD-R drive: /dev/cdrw
Using /dev/cdrom of unknown capabilities
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identification : 'BD-RW   BDR-208D'
Revision       : '1.10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Speed set to 53940 KB/s
wodim: Drive needs to reload the media to return to proper status.
wodim: WARNING: Total disk size unknown. Data may not fit on disk.
Speed set to 53940 KB/s
Starting to write CD/DVD at speed 306.0 in real TAO mode for single session.
Last chance to quit, starting real write in    0 seconds. Operation starts.
Errno: 5 (Input/output error), read track info scsi sendcmd: no error
CDB:  52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.013s timeout 240s
wodim: Cannot get next writable address for 'invisible' track.
wodim: This means that we are checking recorded media.
wodim: This media cannot be written in streaming mode anymore.
wodim: If you like to write to 'preformatted' RW media, try to blank the media first.
wodim: Cannot get next writable address.
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.015s timeout 480s
cmd finished after 0.015s timeout 480s
wodim: Cannot fixate disk.
root@persodebian:/home/caili# wodim dev=/dev/sr0 -prcap
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identification : 'BD-RW   BDR-208D'
Revision       : '1.10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.

Drive capabilities, per MMC-3 page 2A:

  Does read CD-R media
  Does write CD-R media
  Does read CD-RW media
  Does write CD-RW media
  Does read DVD-ROM media
  Does read DVD-R media
  Does write DVD-R media
  Does read DVD-RAM media
  Does not write DVD-RAM media
  Does support test writing

  Does read Mode 2 Form 1 blocks
  Does read Mode 2 Form 2 blocks
  Does read digital audio blocks
  Does restart non-streamed digital audio reads accurately
  Does support Buffer-Underrun-Free recording
  Does read multi-session CDs
  Does read fixed-packet CD media using Method 2
  Does not read CD bar code
  Does not read R-W subcode information
  Does read raw P-W subcode data from lead in
  Does return CD media catalog number
  Does return CD ISRC information
  Does not support C2 error pointers
  Does not deliver composite A/V data

  Does play audio CDs
  Number of volume control levels: 256
  Does support individual volume control setting for each channel
  Does support independent mute setting for each channel
  Does not support digital output on port 1
  Does not support digital output on port 2

  Loading mechanism type: tray
  Does support ejection of CD via START/STOP command
  Does not lock media on power up via prevent jumper
  Does allow media to be locked in the drive via PREVENT/ALLOW command
  Is currently in a media-locked state
  Does not support changing side of disk
  Does not have load-empty-slot-in-changer feature
  Does not support Individual Disk Present feature

  Maximum read  speed: 53940 kB/s (CD 306x, DVD 38x)
  Current read  speed: 53940 kB/s (CD 306x, DVD 38x)
  Maximum write speed: 53940 kB/s (CD 306x, DVD 38x)
  Current write speed: 53940 kB/s (CD 306x, DVD 38x)
  Rotational control selected: CLV/PCAV
  Buffer size in KB: 4000
  Copy management revision supported: 1
  Number of supported write speeds: 6
  Write speed # 0: 53940 kB/s CLV/PCAV (CD 306x, DVD 38x)
  Write speed # 1: 44950 kB/s CLV/PCAV (CD 255x, DVD 32x)
  Write speed # 2: 35960 kB/s CLV/PCAV (CD 204x, DVD 25x)
  Write speed # 3: 26970 kB/s CLV/PCAV (CD 153x, DVD 19x)
  Write speed # 4: 17980 kB/s CLV/PCAV (CD 102x, DVD 12x)
  Write speed # 5:  8990 kB/s CLV/PCAV (CD  51x, DVD  6x)

Supported CD-RW media types according to MMC-4 feature 0x37:
  Does write multi speed       CD-RW media
  Does write high  speed       CD-RW media
  Does write ultra high speed  CD-RW media
  Does write ultra high speed+ CD-RW media

 




Merci.

Dernière modification par sizy458 (31-08-2020 02:55:02)

Hors ligne

#2 28-09-2020 09:47:00

jpt
Banni(e)
Distrib. : Debian 10.8
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : gravure bdr 50gb

Yep !

sizy458 a écrit :

Y a-t-il moyen de savoir sous linux (debian) si mon graveur supporte la gravure de bdr 50gb ??


Excusez mon ignorance mais, c'est quoi, bdr ?


AMD Ryzen3 3200G sur Gigabyte B450M & Make Love Not War

Hors ligne

#3 28-09-2020 10:02:22

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : gravure bdr 50gb

bdr : blu - ray - disc

simple couche : 25 GB
double couche : 50 GB
multi couche   : 100 GB et plus

inconvénient : le prix : 2 - 3 € mini / disque

https://fr.wikipedia.org/wiki/Disque_Blu-ray

https://www.ldlc.com/consommables/cd-dv … ray/c4485/

Hors ligne

#4 28-09-2020 10:11:40

raleur
Membre
Inscription : 03-10-2014

Re : gravure bdr 50gb

"Blu-ray disc", ça donnerait plutôt BRD, mais l'abréviation officielle est BD.
Dans le contexte (référence modèle), je soupçonne que ça veut dire "Blu-ray Disc Rewritable" (réinscriptible) ou "Recordable" (enregistrable).

Il vaut mieux montrer que raconter.

Hors ligne

#5 28-09-2020 10:12:56

jpt
Banni(e)
Distrib. : Debian 10.8
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : gravure bdr 50gb

Debian Alain a écrit :

bdr : blu - ray - disc


Ah !
Vu comme ça...
Parce que moi, j'avais traduit par base - de - registre, qui ressemblait plus à b-d-r, tu vois le truc ? big_smile


AMD Ryzen3 3200G sur Gigabyte B450M & Make Love Not War

Hors ligne

#6 28-09-2020 10:20:52

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : gravure bdr 50gb

raleur  a écrit :

"Blu-ray disc", ça donnerait plutôt BRD, mais l'abréviation officielle est BD.



râleur n'a pas  tord .

stricto - senso , c'est vrai .

mais on trouve couramment  l' abréviation  "bdr"  et je sais plus si çà fait référence aux disques reinscriptibles ou en "lecture seule"  ...

Hors ligne

Pied de page des forums