logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 27-09-2020 10:26:22

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

[abandon] plantage total au démarrage serveur graphique

Bonjour,
depuis la mise à niveau vers Buster 10.5 j'ai un soucis avec le serveur graphique selon le noyau que j'utilise.

Je n'ai pas trouvé de question identique, à part celle-ci :

Freeze au lancement interface graphique / Ati Rage 128 par Henri IV    Installation de Debian     2     15-02-2017 20:54:46 par Henri IV


mais ça ne correspond pas exactement au problème que je rencontre.

Si je démarre sur le noyau 4.19.0-6-amd64, pas de problème, tout fonctionne normalement.
Dès que j'essaie de démarrer sur un noyau plus récent, j'ai systématiquement un plantage total de la machine juste après l'authentification et je dois éteindre l'ordi par la méthode bourrin en appuyant 5 secondes sur le bouton marche/arrêt. Si j'essaie de démarrer en mode recovery avec Grub, tout va bien tant que je ne lance pas le serveur graphique

startx


là plantage !

J'ai cherché un peu partout sur le net mais je ne trouve pas vraiment de solution. J'imagine qu'il doit peut-être y avoir un problème de paramétrage de Xorg, mais où ?
Une idée ? Merci smile

Pour info (on ne sait jamais !) :

dpkg -l | grep linux


ii  binutils-x86-64-linux-gnu                         2.31.1-16                                    amd64        GNU binary utilities, for x86-64-linux-gnu target
ii  console-setup-linux                               1.193~deb10u1                                all          Linux specific part of console-setup
ii  firmware-linux                                    20190114-2                                   all          Binary firmware for various drivers in the Linux kernel (metapackage)
ii  firmware-linux-free                               3.4                                          all          Binary firmware for various drivers in the Linux kernel
ii  firmware-linux-nonfree                            20190114-2                                   all          Binary firmware for various drivers in the Linux kernel (meta-package)
ii  fonts-linuxlibertine                              5.3.0-4                                      all          Linux Libertine family of fonts
ii  libselinux1:amd64                                 2.8-1+b1                                     amd64        SELinux runtime shared libraries
ii  libv4l-0:amd64                                    1.16.3-3                                     amd64        Collection of video4linux support libraries
ii  libv4lconvert0:amd64                              1.16.3-3                                     amd64        Video4linux frame format conversion library
ii  linux-base                                        4.6                                          all          Linux image base package
ii  linux-compiler-gcc-8-x86                          4.19.146-1                                   amd64        Compiler for Linux on x86 (meta-package)
ii  linux-cpupower                                    4.19.146-1                                   amd64        CPU power management tools for Linux
ii  linux-headers-4.19.0-10-amd64                     4.19.132-1                                   amd64        Header files for Linux 4.19.0-10-amd64
ii  linux-headers-4.19.0-10-common                    4.19.132-1                                   all          Common header files for Linux 4.19.0-10
ii  linux-headers-4.19.0-11-amd64                     4.19.146-1                                   amd64        Header files for Linux 4.19.0-11-amd64
ii  linux-headers-4.19.0-11-common                    4.19.146-1                                   all          Common header files for Linux 4.19.0-11
ii  linux-headers-4.19.0-6-amd64                      4.19.67-2+deb10u2                            amd64        Header files for Linux 4.19.0-6-amd64
ii  linux-headers-4.19.0-6-common                     4.19.67-2+deb10u2                            all          Common header files for Linux 4.19.0-6
ii  linux-headers-4.19.0-8-amd64                      4.19.98-1+deb10u1                            amd64        Header files for Linux 4.19.0-8-amd64
ii  linux-headers-4.19.0-8-common                     4.19.98-1+deb10u1                            all          Common header files for Linux 4.19.0-8
ii  linux-headers-4.19.0-9-amd64                      4.19.118-2+deb10u1                           amd64        Header files for Linux 4.19.0-9-amd64
ii  linux-headers-4.19.0-9-common                     4.19.118-2+deb10u1                           all          Common header files for Linux 4.19.0-9
ii  linux-headers-amd64                               4.19+105+deb10u6                             amd64        Header files for Linux amd64 configuration (meta-package)
ii  linux-image-4.19.0-10-amd64                       4.19.132-1                                   amd64        Linux 4.19 for 64-bit PCs (signed)
ii  linux-image-4.19.0-11-amd64                       4.19.146-1                                   amd64        Linux 4.19 for 64-bit PCs (signed)
ii  linux-image-4.19.0-6-amd64                        4.19.67-2+deb10u2                            amd64        Linux 4.19 for 64-bit PCs (signed)
ii  linux-image-4.19.0-8-amd64                        4.19.98-1+deb10u1                            amd64        Linux 4.19 for 64-bit PCs (signed)
ii  linux-image-4.19.0-9-amd64                        4.19.118-2+deb10u1                           amd64        Linux 4.19 for 64-bit PCs (signed)
ii  linux-image-amd64                                 4.19+105+deb10u6                             amd64        Linux for 64-bit PCs (meta-package)
ii  linux-kbuild-4.19                                 4.19.146-1                                   amd64        Kbuild infrastructure for Linux 4.19
ii  linux-libc-dev:amd64                              4.19.146-1                                   amd64        Linux support headers for userspace development
ii  skypeforlinux                                     8.64.0.81                                    amd64        Skype keeps the world talking, for free.
ii  util-linux                                        2.33.1-0.1                                   amd64        miscellaneous system utilities
ii  util-linux-locales                                2.33.1-0.1                                   all          locales files for util-linux
 



lshw


hp-probook                  
    description: Ordinateur Bloc-notes
    produit: HP ProBook 470 G3 (P4P67EA)
    fabriquant: HP
    numéro de série: 5CD6258S96
    bits: 64 bits
    fonctionnalités: smbios-2.7 dmi-2.7 smp vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=notebook family=103C_5336AN frontpanel_password=disabled keyboard_password=disabled power-on_password=disabled sku=P4P67EA uuid=7EE07533-DFF1-E711-961C-4BACB9008042
  *-core
       description: Carte mère
       produit: 8102
       fabriquant: HP
       identifiant matériel: 0
       version: KBC Version 40.71
       numéro de série: PFMLB038J300TA
     *-cache:0
          description: L1 cache
          identifiant matériel: 0
          emplacement: L1 Cache
          taille: 64KiB
          capacité: 64KiB
          fonctionnalités: synchronous internal write-back data
          configuration: level=1
     *-cache:1
          description: L1 cache
          identifiant matériel: 1
          emplacement: L1 Cache
          taille: 64KiB
          capacité: 64KiB
          fonctionnalités: synchronous internal write-back instruction
          configuration: level=1
     *-cache:2
          description: L2 cache
          identifiant matériel: 2
          emplacement: L2 Cache
          taille: 512KiB
          capacité: 512KiB
          fonctionnalités: synchronous internal write-back unified
          configuration: level=2
     *-cache:3
          description: L3 cache
          identifiant matériel: 3
          emplacement: L3 Cache
          taille: 3MiB
          capacité: 3MiB
          fonctionnalités: synchronous internal write-back unified
          configuration: level=3
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz
          fabriquant: Intel Corp.
          identifiant matériel: 4
          information bus: cpu@0
          version: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz
          numéro de série: To Be Filled By O.E.M.
          emplacement: U3E1
          taille: 1407MHz
          capacité: 4005MHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp cpufreq
          configuration: cores=2 enabledcores=2 threads=4
     *-memory
          description: Mémoire Système
          identifiant matériel: 5
          emplacement: Carte mère
          taille: 8GiB
        *-bank:0
             description: SODIMM DDR3 Synchrone Unbuffered (Unregistered) 1600 MHz (0,6 ns)
             produit: M471B5173EB0-YK0
             fabriquant: Samsung
             identifiant matériel: 0
             numéro de série: 15BAACCE
             emplacement: Bottom-Slot 1(top)
             taille: 4GiB
             bits: 64 bits
             horloge: 1600MHz (0.6ns)
        *-bank:1
             description: SODIMM DDR3 Synchrone Unbuffered (Unregistered) 1600 MHz (0,6 ns)
             produit: CT51264BF160BJ.M8F
             fabriquant: Unknown - [0x9B85]
             identifiant matériel: 1
             numéro de série: E0089FC5
             emplacement: Bottom-Slot 2(under)
             taille: 4GiB
             bits: 64 bits
             horloge: 1600MHz (0.6ns)
     *-firmware
          description: BIOS
          fabriquant: HP
          identifiant matériel: b
          version: N78 Ver. 01.19
          date: 10/17/2017
          taille: 64KiB
          capacité: 16MiB
          fonctionnalités: pci pcmcia upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification netboot uefi
     *-pci
          description: Host bridge
          produit: Skylake Host Bridge/DRAM Registers
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 08
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=skl_uncore
          ressources: irq:0
        *-display
             description: VGA compatible controller
             produit: HD Graphics 520
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 07
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:129 mémoire:e1000000-e1ffffff mémoire:c0000000-cfffffff portE/S:5000(taille=64) mémoire:c0000-dffff
        *-usb
             description: USB controller
             produit: Sunrise Point-LP USB 3.0 xHCI Controller
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:126 mémoire:e2400000-e240ffff
           *-usbhost:0
                produit: xHCI Host Controller
                fabriquant: Linux 4.19.0-6-amd64 xhci-hcd
                identifiant matériel: 0
                information bus: usb@1
                nom logique: usb1
                version: 4.19
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=12 speed=480Mbit/s
              *-usb:0
                   description: Souris
                   produit: USB Optical Mouse
                   fabriquant: Logitech
                   identifiant matériel: 4
                   information bus: usb@1:4
                   version: 72.00
                   fonctionnalités: usb-2.00
                   configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
              *-usb:1
                   description: Vidéo
                   produit: HP HD Camera
                   fabriquant: SunplusIT Inc
                   identifiant matériel: 6
                   information bus: usb@1:6
                   version: 98.85
                   fonctionnalités: usb-2.00
                   configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
              *-usb:2
                   description: Interface sans fil Bluetooth
                   fabriquant: Intel Corp.
                   identifiant matériel: 7
                   information bus: usb@1:7
                   version: 0.01
                   fonctionnalités: bluetooth usb-2.00
                   configuration: driver=btusb maxpower=100mA speed=12Mbit/s
              *-usb:3 NON-RÉCLAMÉ
                   description: Périphérique USB générique
                   produit: VFS495 Fingerprint Reader
                   fabriquant: Validity Sensors, Inc.
                   identifiant matériel: 8
                   information bus: usb@1:8
                   version: 1.04
                   numéro de série: 003020f9ab9b
                   fonctionnalités: usb-1.10
                   configuration: maxpower=100mA speed=12Mbit/s
           *-usbhost:1
                produit: xHCI Host Controller
                fabriquant: Linux 4.19.0-6-amd64 xhci-hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 4.19
                fonctionnalités: usb-3.00
                configuration: driver=hub slots=6 speed=5000Mbit/s
        *-generic
             description: Signal processing controller
             produit: Sunrise Point-LP Thermal subsystem
             fabriquant: Intel Corporation
             identifiant matériel: 14.2
             information bus: pci@0000:00:14.2
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi cap_list
             configuration: driver=intel_pch_thermal latency=0
             ressources: irq:18 mémoire:e242a000-e242afff
        *-communication
             description: Communication controller
             produit: Sunrise Point-LP CSME HECI #1
             fabriquant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             ressources: irq:128 mémoire:e242b000-e242bfff
        *-sata
             description: SATA controller
             produit: Sunrise Point-LP SATA Controller [AHCI mode]
             fabriquant: Intel Corporation
             identifiant matériel: 17
             information bus: pci@0000:00:17.0
             nom logique: scsi0
             nom logique: scsi1
             version: 21
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: sata msi pm ahci_1.0 bus_master cap_list emulated
             configuration: driver=ahci latency=0
             ressources: irq:125 mémoire:e2428000-e2429fff mémoire:e242e000-e242e0ff portE/S:5080(taille=8) portE/S:5088(taille=4) portE/S:5040(taille=32) mémoire:e242c000-e242c7ff
           *-disk
                description: ATA Disk
                produit: TOSHIBA MQ01ABD1
                fabriquant: Toshiba
                identifiant matériel: 0
                information bus: scsi@0:0.0.0
                nom logique: /dev/sda
                version: 2C
                numéro de série: 6673SNIBS
                taille: 931GiB (1TB)
                fonctionnalités: gpt-1.00 partitioned partitioned:gpt
                configuration: ansiversion=5 guid=1fd770c7-c8f5-45c1-a1fe-6368f83300a6 logicalsectorsize=512 sectorsize=4096
              *-volume:0
                   description: Windows FAT volume
                   fabriquant: mkfs.fat
                   identifiant matériel: 1
                   information bus: scsi@0:0.0.0,1
                   nom logique: /dev/sda1
                   nom logique: /boot/efi
                   version: FAT32
                   numéro de série: 911e-4dfe
                   taille: 510MiB
                   capacité: 511MiB
                   fonctionnalités: boot fat initialized
                   configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro state=mounted
              *-volume:1
                   description: EXT4 volume
                   fabriquant: Linux
                   identifiant matériel: 2
                   information bus: scsi@0:0.0.0,2
                   nom logique: /dev/sda2
                   nom logique: /
                   version: 1.0
                   numéro de série: edf1fef6-ab40-4bc9-91bf-80b0d9c76636
                   taille: 27GiB
                   fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                   configuration: created=2020-02-14 15:30:42 filesystem=ext4 lastmountpoint=/ modified=2020-09-27 10:33:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro mounted=2020-09-27 10:33:49 name=racine state=mounted
              *-volume:2
                   description: Linux swap volume
                   fabriquant: Linux
                   identifiant matériel: 3
                   information bus: scsi@0:0.0.0,3
                   nom logique: /dev/sda3
                   version: 1
                   numéro de série: c75323ba-5177-4ee7-b2ed-63bae4dae7dd
                   taille: 8086MiB
                   capacité: 8087MiB
                   fonctionnalités: nofs swap initialized
                   configuration: filesystem=swap name=memoire pagesize=4095
              *-volume:3
                   description: EXT4 volume
                   fabriquant: Linux
                   identifiant matériel: 4
                   information bus: scsi@0:0.0.0,4
                   nom logique: /dev/sda4
                   nom logique: /home
                   version: 1.0
                   numéro de série: 6956b2ec-f80d-46d7-82c1-1dff8bbdbb45
                   taille: 895GiB
                   fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                   configuration: created=2020-02-14 15:30:44 filesystem=ext4 lastmountpoint=/home modified=2020-09-27 10:33:57 mount.fstype=ext4 mount.options=rw,relatime mounted=2020-09-27 10:33:57 name=maison state=mounted
           *-cdrom
                description: DVD-RAM writer
                produit: DVDRW  DU8A6SH
                fabriquant: hp
                identifiant matériel: 1
                information bus: scsi@1:0.0.0
                nom logique: /dev/cdrom
                nom logique: /dev/cdrw
                nom logique: /dev/dvd
                nom logique: /dev/dvdrw
                nom logique: /dev/sr0
                version: DH61
                fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
                configuration: ansiversion=5 status=nodisc
        *-pci:0
             description: PCI bridge
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:120 portE/S:3000(taille=4096) mémoire:e2000000-e20fffff portE/S:d0000000(taille=270532608)
           *-display
                description: Display controller
                produit: Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445]
                fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: 83
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm pciexpress msi bus_master cap_list rom
                configuration: driver=amdgpu latency=0
                ressources: irq:132 mémoire:d0000000-dfffffff mémoire:e0000000-e01fffff portE/S:3000(taille=256) mémoire:e2000000-e203ffff mémoire:e2040000-e205ffff
        *-pci:1
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #5
             fabriquant: Intel Corporation
             identifiant matériel: 1c.4
             information bus: pci@0000:00:1c.4
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:121 portE/S:4000(taille=4096) mémoire:e2100000-e21fffff
           *-network
                description: Ethernet interface
                produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                nom logique: enp2s0
                version: 15
                numéro de série: ec:8e:b5:42:78:dc
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical tp aui bnc mii fibre 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=MII
                ressources: irq:16 portE/S:4000(taille=256) mémoire:e2104000-e2104fff mémoire:e2100000-e2103fff
        *-pci:2
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #6
             fabriquant: Intel Corporation
             identifiant matériel: 1c.5
             information bus: pci@0000:00:1c.5
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:122 mémoire:e2200000-e22fffff
           *-network
                description: Interface réseau sans fil
                produit: Wireless 3165
                fabriquant: Intel Corporation
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                nom logique: wlp3s0
                version: 81
                numéro de série: b8:81:98:4b:06:6d
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=iwlwifi driverversion=4.19.0-6-amd64 firmware=29.1044073957.0 ip=192.168.1.18 latency=0 link=yes multicast=yes wireless=IEEE 802.11
                ressources: irq:130 mémoire:e2200000-e2201fff
        *-pci:3
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #9
             fabriquant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:123 portE/S:6000(taille=4096) mémoire:e2300000-e23fffff portE/S:be900000(taille=2097152)
           *-generic
                description: Unassigned class
                produit: RTS522A PCI Express Card Reader
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:04:00.0
                version: 01
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list
                configuration: driver=rtsx_pci latency=0
                ressources: irq:124 mémoire:e2300000-e2300fff
        *-isa
             description: ISA bridge
             produit: Sunrise Point-LP LPC Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 21
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master
             configuration: latency=0
        *-memory NON-RÉCLAMÉ
             description: Memory controller
             produit: Sunrise Point-LP PMC
             fabriquant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 21
             bits: 32 bits
             horloge: 33MHz (30.3ns)
             configuration: latency=0
             ressources: mémoire:e2420000-e2423fff
        *-multimedia
             description: Audio device
             produit: Sunrise Point-LP HD Audio
             fabriquant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=64
             ressources: irq:131 mémoire:e2424000-e2427fff mémoire:e2410000-e241ffff
        *-serial
             description: SMBus
             produit: Sunrise Point-LP SMBus
             fabriquant: Intel Corporation
             identifiant matériel: 1f.4
             information bus: pci@0000:00:1f.4
             version: 21
             bits: 64 bits
             horloge: 33MHz
             configuration: driver=i801_smbus latency=0
             ressources: irq:16 mémoire:e242d000-e242d0ff portE/S:efa0(taille=32)
     *-pnp00:00
          produit: PnP device PNP0c02
          identifiant matériel: 6
          fonctionnalités: pnp
          configuration: driver=system
     *-pnp00:01
          produit: PnP device PNP0c02
          identifiant matériel: 7
          fonctionnalités: pnp
          configuration: driver=system
     *-pnp00:02
          produit: PnP device PNP0c02
          identifiant matériel: 8
          fonctionnalités: pnp
          configuration: driver=system
     *-pnp00:03
          produit: PnP device PNP0b00
          identifiant matériel: 9
          fonctionnalités: pnp
          configuration: driver=rtc_cmos
     *-pnp00:04
          produit: PnP device INT3f0d
          fabriquant: Interphase Corporation
          identifiant matériel: a
          fonctionnalités: pnp
          configuration: driver=system
     *-pnp00:05
          produit: PnP device HPQ8002
          fabriquant: HP
          identifiant matériel: c
          fonctionnalités: pnp
          configuration: driver=i8042 kbd
     *-pnp00:06
          produit: PnP device SYN302d
          fabriquant: Synaptics Inc
          identifiant matériel: d
          fonctionnalités: pnp
          configuration: driver=i8042 aux
     *-pnp00:07
          produit: PnP device PNP0c02
          identifiant matériel: e
          fonctionnalités: pnp
          configuration: driver=system
     *-pnp00:08
          produit: PnP device PNP0c02
          identifiant matériel: f
          fonctionnalités: pnp
          configuration: driver=system
     *-pnp00:09
          produit: PnP device IFX0102
          fabriquant: Infineon Technologies AG
          identifiant matériel: 10
          fonctionnalités: pnp
          configuration: driver=tpm_tis
  *-battery
       produit: RI04044
       fabriquant: 131-22-34
       identifiant matériel: 1
       emplacement: Primary
       capacité: 43660mWh
       configuration: voltage=14,8V

Dernière modification par golestin (19-11-2020 11:56:23)

Hors ligne

#2 27-09-2020 17:47:44

jpt
Banni(e)
Distrib. : Debian 10.8
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : [abandon] plantage total au démarrage serveur graphique

Salut,

Si X plante, c'est d'abord ça qu'il nous faut :

cat /var/log/Xorg.0.log | grep EE

et on verra le reste après.

Dernière modification par jpt (27-09-2020 17:48:13)


AMD Ryzen3 3200G sur Gigabyte B450M & Make Love Not War

Hors ligne

#3 27-09-2020 17:55:15

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

peut être aussi , golestin big_smile  big_smile  big_smile

lspci -nnk | egrep "VGA|3D|Display" -A3



tes soucis ressemblent à un pilote graphique qui ne se  charge pas .

carte nvidia ( très fréquent ) ou amd  ? à moins que ... intel ?

cette commande nous renseignera .

Dernière modification par Debian Alain (27-09-2020 18:32:23)

Hors ligne

#4 27-09-2020 18:27:38

anonyme
Invité

Re : [abandon] plantage total au démarrage serveur graphique

bonsoir

un nettoyage sur les noyaux 5.xx ?
une piste c'est de tester modeset (du noyau ) uniquement  ou le driver ati uniquement.

par exemple faire un nomodeset=1 a partir de grub et utiliser le paquet xserver-xorg-video-ati
ou
supprimer le paquet xserver-xorg-video-ati et tester avec le modeset du noyau

pour comprendre ce qu il se passe le Xorg.0.log


cat /var/log/Xorg.0.log
 


ps: si tu arrive a prendre la main avec "Ctrl+Alt+F2"

démarrer en mode dépannage aussi

a titre indicatif pour cela


un plantage total de la machine juste après l'authentification
 



ne fait pas de "authentification"
le serveur X est déjà lancé (a l'invite de connexion )
donc c'est après que cela se gâte
la combinaison de touches au clavier ci dessus va te donner une console pour taper tes commandes

nota : tu est sous le bureau KDE ? , c'est bien cela

Dernière modification par anonyme (27-09-2020 18:30:16)

#5 28-09-2020 14:52:10

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Salut jpt et Debian Alain et anonyme !

Suivant vos conseils, voilà ce que j'obtiens en démarrant avec le noyau 4.19.0-6-amd64 sous KDE.

cat /var/log/Xorg.0.log | grep EE


        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   305.670] (EE) systemd-logind: failed to get session: PID 816 does not belong to any known session



lspci -nnk | egrep "VGA|3D|Display" -A3


00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 520 [8086:1916] (rev 07)
  Subsystem: Hewlett-Packard Company Skylake GT2 [HD Graphics 520] [103c:8102]
  Kernel driver in use: i915
  Kernel modules: i915
--
01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] [1002:6900] (rev 83)
  Subsystem: Hewlett-Packard Company Radeon R7 M340 [103c:811c]
  Kernel driver in use: amdgpu
  Kernel modules: amdgpu
 



Si je démarre avec le noyau 4.19.0-11-amd64 (recovery mode) en mode console (donc sans lancer X), j'obtiens exactement la même chose.
Le résultat de la première commande me paraissant suspect, je ne vais pas plus loin pour l'instant et j'attends sagement old_geek.gif de vos nouvelles smile

Et, oui, je suis bien sous KDE Plasma 5.14.5

Hors ligne

#6 28-09-2020 14:57:23

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Et voici le résultat global de la commande

cat /var/log/Xorg.0.log


[   305.011]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[   305.030] Build Operating System: Linux 4.19.0-10-amd64 x86_64 Debian
[   305.036] Current Operating System: Linux hp-probook 4.19.0-10-amd64 #1 SMP Debian 4.19.132-1 (2020-07-24) x86_64
[   305.036] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64 root=UUID=edf1fef6-ab40-4bc9-91bf-80b0d9c76636 ro single
[   305.044] Build Date: 27 August 2020  08:51:48AM
[   305.047] xorg-server 2:1.20.4-1+deb10u1 (https://www.debian.org/support)
[   305.050] Current version of pixman: 0.36.0
[   305.056]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   305.056] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   305.068] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 21 16:02:53 2020
[   305.093] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   305.118] (==) No Layout section.  Using the first Screen section.
[   305.118] (==) No screen section available. Using defaults.
[   305.118] (**) |-->Screen "Default Screen Section" (0)
[   305.118] (**) |   |-->Monitor "<default monitor>"
[   305.132] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   305.132] (==) Automatically adding devices
[   305.132] (==) Automatically enabling devices
[   305.132] (==) Automatically adding GPU devices
[   305.132] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   305.174] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   305.174]    Entry deleted from font path.
[   305.194] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[   305.194] (==) ModulePath set to "/usr/lib/xorg/modules"
[   305.194] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   305.194] (II) Loader magic: 0x55d61d444e20
[   305.194] (II) Module ABI versions:
[   305.194]    X.Org ANSI C Emulation: 0.4
[   305.194]    X.Org Video Driver: 24.0
[   305.194]    X.Org XInput driver : 24.1
[   305.194]    X.Org Server Extension : 10.0
[   305.195] (++) using VT number 1

[   305.670] (EE) systemd-logind: failed to get session: PID 816 does not belong to any known session
[   305.672] (II) xfree86: Adding drm device (/dev/dri/card0)
[   305.675] (II) xfree86: Adding drm device (/dev/dri/card1)
[   305.681] (--) PCI:*(0@0:2:0) 8086:1916:103c:8102 rev 7, Mem @ 0xe1000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   305.681] (--) PCI: (1@0:0:0) 1002:6900:103c:811c rev 131, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xe2000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[   305.681] (II) LoadModule: "glx"
[   305.693] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   305.777] (II) Module glx: vendor="X.Org Foundation"
[   305.777]    compiled for 1.20.4, module version = 1.0.0
[   305.777]    ABI class: X.Org Server Extension, version 10.0
[   305.777] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[   305.777]    loading driver: amdgpu
[   305.777] (==) Matched amdgpu as autoconfigured driver 0
[   305.777] (==) Matched ati as autoconfigured driver 1
[   305.777] (==) Matched modesetting as autoconfigured driver 2
[   305.778] (==) Matched fbdev as autoconfigured driver 3
[   305.778] (==) Matched vesa as autoconfigured driver 4
[   305.778] (==) Assigned the driver to the xf86ConfigLayout
[   305.778] (II) LoadModule: "amdgpu"
[   305.805] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[   305.853] (II) Module amdgpu: vendor="X.Org Foundation"
[   305.853]    compiled for 1.20.3, module version = 18.1.99
[   305.853]    Module class: X.Org Video Driver
[   305.853]    ABI class: X.Org Video Driver, version 24.0
[   305.853] (II) LoadModule: "ati"
[   305.854] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   305.869] (II) Module ati: vendor="X.Org Foundation"
[   305.869]    compiled for 1.20.4, module version = 19.0.1
[   305.869]    Module class: X.Org Video Driver
[   305.869]    ABI class: X.Org Video Driver, version 24.0
 

Hors ligne

#7 28-09-2020 15:22:55

jpt
Banni(e)
Distrib. : Debian 10.8
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour,

systemd-logind: failed to get session: PID 816 does not belong to any known session

Je ne m'attendais pas à ça, qui ne me parle absolument pas. Tu devrais googler cette ligne, j'ai testé, ça remonte 110 000 réponses !

Moi je n'ai pas le temps, mon problème récemment résolu vient de retomber en panne.


AMD Ryzen3 3200G sur Gigabyte B450M & Make Love Not War

Hors ligne

#8 28-09-2020 15:30:27

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour,

merci jpt, moi aussi j'ai eu quelques soucis avec VB au début, maintenant j'ai compris qu'il ne faut pas forcément updater, j'en reste à la 6.1.2 et ça marche très bien sous Buster !

Hors ligne

#9 28-09-2020 15:46:18

Jean-Pierre Pinson
Adhérent(e)
Lieu : Orléans
Distrib. : Debian Sid 64bits Ordi.: Thinkpad T400
Noyau : de cerise
(G)UI : xfce
Inscription : 04-03-2017

Re : [abandon] plantage total au démarrage serveur graphique

Bonbjour golestin

KDE Plasma 5.14.5 ça fonctionne avec Wayland ça ?

Et comme Wayland n'est pas encore très au point, Je te conseillerais plutôt de changer d'environnement de bureau, pour essayer xfce qui lui fonctionne avec Xorg

Dernière modification par Jean-Pierre Pinson (28-09-2020 17:14:54)


Debian sid
Bureau : xfce
Ordinateur : Thinkpad T400 libreboot

Hors ligne

#10 28-09-2020 16:00:56

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

bonbjour golestin big_smile  big_smile  big_smile

que donnent  : ?

cat ~/.local/share/xorg/Xorg.0.log | grep "(EE)"

ou / et

cat /var/log/Xorg.0.log | grep "(EE)"

(normalement redondants)

aussi  :

systemctl status display-manager

Dernière modification par Debian Alain (28-09-2020 16:11:50)

Hors ligne

#11 29-09-2020 09:19:48

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour Jean-Pierre Pinson,

le problème ne vient pas de KDE car, quel que soit l'environnement que je choisis, dès que j'ai cliqué sur le OK de l'identification, ça plante !

Hors ligne

#12 29-09-2020 09:31:40

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour Debian Alain !

Voici :

cat ~/.local/share/xorg/Xorg.0.log | grep "(EE)"


        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.



cat /var/log/Xorg.0.log | grep "(EE)"


        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   305.670] (EE) systemd-logind: failed to get session: PID 816 does not belong to any known session


(redondant, en effet smile )

systemctl status display-manager


● gdm.service - GNOME Display Manager
   Loaded: loaded (/lib/systemd/system/gdm.service; static; vendor preset: enabled)
   Active: active (running) since Tue 2020-09-29 09:32:02 CEST; 51min ago
  Process: 898 ExecStartPre=/usr/share/gdm/generate-config (code=exited, status=0/SUCCESS)
 Main PID: 925 (gdm3)
    Tasks: 3 (limit: 4915)
   Memory: 6.6M
   CGroup: /system.slice/gdm.service
           └─925 /usr/sbin/gdm3

sept. 29 09:32:00 hp-probook systemd[1]: Starting GNOME Display Manager...
sept. 29 09:32:02 hp-probook systemd[1]: Started GNOME Display Manager.
sept. 29 09:32:07 hp-probook gdm-launch-environment][945]: pam_unix(gdm-launch-environment:session): session opened for user Debian-gdm by (uid=0)
sept. 29 09:33:05 hp-probook gdm-password][2044]: pam_unix(gdm-password:session): session opened for user jean-paul by (uid=0)

Hors ligne

#13 29-09-2020 09:47:40

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

bonjour golestin big_smile  big_smile  big_smile

tu n'utilises que kde , comme bureau ? ou aussi gnome ?

tu as essayé d'installer et de configurer sddm ?

https://fr.wikipedia.org/wiki/KDE_Display_Manager
https://debian-facile.org/doc:environnements:kde:sddm

ou de lancer kde en mode X (org) ?

normalement , gdm devrai te le permettre (roue crantée , en bas à droite dans les dernières versions)

attention , wayland n'est pas encore parfaitement au point .
dans l'ensemble , c'est bon . mais y a parfois des soucis .

Dernière modification par Debian Alain (29-09-2020 09:52:37)

Hors ligne

#14 29-09-2020 10:14:41

jpt
Banni(e)
Distrib. : Debian 10.8
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour,

golestin a écrit :

cat ~/.local/share/xorg/Xorg.0.log | grep "(EE)"
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

cat /var/log/Xorg.0.log | grep "(EE)"
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   305.670] (EE) systemd-logind: failed to get session: PID 816 does not belong to any known session


(redondant, en effet smile )


Ben non, j'ne trouve pas que ça soit redondant : on a dans les deux logs une ligne identique d'informations (dont on se contre-fiche, celle-la on l'aura toujours, que les .log soient truffés d'erreur ou qu'il n'y en ait aucune), et uniquement dans le /var/log/Xorg.0.log une vraie erreur, que je t'ai suggéré de googler, hier ; l'as-tu fait ?


Jean-Pierre Pinson a écrit :

Et comme Wayland n'est pas encore très au point,

Debian Alain a écrit :

attention, wayland n'est pas encore parfaitement au point.
dans l'ensemble, c'est bon. mais y a parfois des soucis.

C'est de Debian dont on parle, là ? Au secours, laissez-moi sortir ! mad

Dernière modification par jpt (29-09-2020 10:17:27)


AMD Ryzen3 3200G sur Gigabyte B450M & Make Love Not War

Hors ligne

#15 29-09-2020 10:33:36

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

que donne : ?

ps -ef | grep 816

Hors ligne

#16 29-09-2020 11:39:51

--gilles--
Membre
Lieu : Orléans - La Source
Distrib. : Debian 12
Noyau : Linux 6.1.0-18-amd64
(G)UI : Gnome - mutter 43.8-0+deb12u1
Inscription : 15-02-2016

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour à tous, puisque systemd-logind pose problème, que donne ?  :

systemctl status systemd-logind


Si tout le monde pense pareil, c'est qu'aucune personne ne pense beaucoup.
 Intel® Core™2 Duo E8500  × 2
4,0 Gio DDR3 - 1333 MHz
Et si vous cherchiez votre solution dans le wiki => https://debian-facile.org/accueil palestine.png

Hors ligne

#17 29-09-2020 13:40:51

Jean-Pierre Pinson
Adhérent(e)
Lieu : Orléans
Distrib. : Debian Sid 64bits Ordi.: Thinkpad T400
Noyau : de cerise
(G)UI : xfce
Inscription : 04-03-2017

Re : [abandon] plantage total au démarrage serveur graphique

golestin a écrit :

Bonjour Jean-Pierre Pinson,

le problème ne vient pas de KDE car, quel que soit l'environnement que je choisis, dès que j'ai cliqué sur le OK de l'identification, ça plante !





Quelle autre environnement as-tu choisi ? car gnome fonctionne aussi avec Wayland !

Le problème n'est pas kde ni gnome, mais bel et bien Wayland !

Dernière modification par Jean-Pierre Pinson (29-09-2020 13:45:40)


Debian sid
Bureau : xfce
Ordinateur : Thinkpad T400 libreboot

Hors ligne

#18 29-09-2020 14:48:27

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

tu n'utilises que kde , comme bureau ? ou aussi gnome ?



J'ai essayé avec KDE, Gnome, Cinnamon, bref, quel que soit l'environnement, j'ai le plantage.

systemd-logind: failed to get session: PID 816 does not belong to any known session

et uniquement dans le /var/log/Xorg.0.log une vraie erreur, que je t'ai suggéré de googler, hier ; l'as-tu fait ?



J'ai Qwanté plutôt que googlé cette erreur mais il y a tellement de posts à dépouiller que je cherche encore... Beaucoup de posts qui datent d'avant 2014 aussi, donc peu pertinents je pense... Bref pour l'instant je n'ai pas encore trouvé smile

Hors ligne

#19 29-09-2020 14:54:01

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Debian Alain


ps -ef | grep 816


jean-pa+  1641  1618  3 15:38 ?        00:00:24 /usr/bin/kwin_x11 -session 1014914a8fdf000158169575500000011360000_1601378625_69532
jean-pa+  1688  1593  0 15:38 ?        00:00:00 /usr/lib/x86_64-linux-gnu/libexec/org_kde_powerdevil -session 1014914a8fdf000158169577600000011360009_1601378614_124543
jean-pa+  3002  2995  0 15:49 pts/1    00:00:00 grep 816



et :

--gilles--


systemctl status systemd-logind


● systemd-logind.service - Login Service
   Loaded: loaded (/lib/systemd/system/systemd-logind.service; static; vendor preset: enabled)
   Active: active (running) since Tue 2020-09-29 15:37:28 CEST; 13min ago
     Docs: man:systemd-logind.service(8)
           man:logind.conf(5)
           https://www.freedesktop.org/wiki/Software/systemd/logind
           https://www.freedesktop.org/wiki/Software/systemd/multiseat
 Main PID: 800 (systemd-logind)
   Status: "Processing requests..."
    Tasks: 1 (limit: 4915)
   Memory: 2.4M
   CGroup: /system.slice/systemd-logind.service
           └─800 /lib/systemd/systemd-logind

sept. 29 15:37:25 hp-probook systemd-logind[800]: New seat seat0.
sept. 29 15:37:25 hp-probook systemd-logind[800]: Watching system buttons on /dev/input/event6 (Power Button)
sept. 29 15:37:25 hp-probook systemd-logind[800]: Watching system buttons on /dev/input/event5 (Lid Switch)
sept. 29 15:37:25 hp-probook systemd-logind[800]: Watching system buttons on /dev/input/event4 (Sleep Button)
sept. 29 15:37:26 hp-probook systemd-logind[800]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
sept. 29 15:37:28 hp-probook systemd[1]: Started Login Service.
sept. 29 15:37:34 hp-probook systemd-logind[800]: New session c1 of user Debian-gdm.
sept. 29 15:38:28 hp-probook systemd-logind[800]: New session 2 of user jean-paul.
sept. 29 15:38:40 hp-probook systemd-logind[800]: Session c1 logged out. Waiting for processes to exit.
sept. 29 15:38:42 hp-probook systemd-logind[800]: Removed session c1.
 

Hors ligne

#20 29-09-2020 16:46:17

anonyme
Invité

Re : [abandon] plantage total au démarrage serveur graphique

tu a deux cartes graphiques sur cette machine ?


[   305.681] (--) PCI:*(0@0:2:0) 8086:1916:103c:8102 rev 7, Mem @ 0xe1000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   305.681] (--) PCI: (1@0:0:0) 1002:6900:103c:811c rev 131, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xe2000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
 

#21 29-09-2020 17:25:00

golestin
Membre
Distrib. : Debian Buster 10.9
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

tu a deux cartes graphiques sur cette machine ?



Aucune idée !!! Je n'ai jamais ouvert la machine, je ne sais même pas si je peux (ça doit être possible, mais comment ???). Mais ça m'étonnerait fort ! J'ai juste une trappe pour la RAM au dos.
Là j'avoue que je suis nul en matos big_smile big_smile

Dernière modification par golestin (29-09-2020 17:40:36)

Hors ligne

#22 29-09-2020 17:42:33

jpt
Banni(e)
Distrib. : Debian 10.8
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : [abandon] plantage total au démarrage serveur graphique

anonyme a écrit :

tu a deux cartes graphiques sur cette machine ?
[   305.681] (--) PCI:*(0@0:2:0) 8086:1916:103c:8102 rev 7, Mem @ 0xe1000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   305.681] (--) PCI: (1@0:0:0) 1002:6900:103c:811c rev 131, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xe2000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072


Ce n'est peut-être pas impossible :

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 520 [8086:1916] (rev 07)
  Subsystem: Hewlett-Packard Company Skylake GT2 [HD Graphics 520] [103c:8102]
  Kernel driver in use: i915
  Kernel modules: i915
--
01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] [1002:6900] (rev 83)
  Subsystem: Hewlett-Packard Company Radeon R7 M340 [103c:811c]
  Kernel driver in use: amdgpu
  Kernel modules: amdgpu

Mais après, perso, je ne sais pas quoi faire de cette information. Il y a des choses qui sont très diffciles à diagnostiquer à distance...

(c'est dommage qu'on ne puisse pas mettre des couleurs différentes aux textes...)

EDIT : il y a ça dans le 1er post :

     ...
     *-pci
          description: Host bridge
          produit: Skylake Host Bridge/DRAM Registers
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 08
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=skl_uncore
          ressources: irq:0
        *-display
             description: VGA compatible controller
             produit: HD Graphics 520
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 07
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:129 mémoire:e1000000-e1ffffff mémoire:c0000000-cfffffff portE/S:5000(taille=64) mémoire:c0000-dffff
        ...
        *-pci:0
             description: PCI bridge
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:120 portE/S:3000(taille=4096) mémoire:e2000000-e20fffff portE/S:d0000000(taille=270532608)
           *-display
                description: Display controller
                produit: Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445]
                fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: 83
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm pciexpress msi bus_master cap_list rom
                configuration: driver=amdgpu latency=0
                ressources: irq:132 mémoire:d0000000-dfffffff mémoire:e0000000-e01fffff portE/S:3000(taille=256) mémoire:e2000000-e203ffff mémoire:e2040000-e205ffff

Dernière modification par jpt (29-09-2020 17:55:35)


AMD Ryzen3 3200G sur Gigabyte B450M & Make Love Not War

Hors ligne

#23 29-09-2020 18:04:28

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : [abandon] plantage total au démarrage serveur graphique

jpt a écrit :

C'est de Debian dont on parle, là ? Au secours, laissez-moi sortir ! mad


Tout le monde peut sortir, tu t'es enfermé tout seul lol

Jean-Pierre Pinson a écrit :


Le problème n'est pas kde ni gnome, mais bel et bien Wayland !


Il a essayé cinnamon qui n'utilise pas wayland donc le problème est (sans doute) ailleurs
d'ailleurs, il semble que KDE lance par défaut une session Xorg contrairement à Gnome

GNOME 3.20+ (Wayland used by default in Debian 10 and newer, older versions use Xorg by default)

KDE Plasma 5.4+ (Xorg is used by default, Wayland requires the plasma-workspace-wayland package to be installed)


https://wiki.debian.org/Wayland#Supported_environments

Hors ligne

#24 29-09-2020 19:24:57

--gilles--
Membre
Lieu : Orléans - La Source
Distrib. : Debian 12
Noyau : Linux 6.1.0-18-amd64
(G)UI : Gnome - mutter 43.8-0+deb12u1
Inscription : 15-02-2016

Re : [abandon] plantage total au démarrage serveur graphique

Le résultat de :

systemctl status systemd-logind

est correct. À mon avis cela doit être les étapes suivantes qui posent problème.


Si tout le monde pense pareil, c'est qu'aucune personne ne pense beaucoup.
 Intel® Core™2 Duo E8500  × 2
4,0 Gio DDR3 - 1333 MHz
Et si vous cherchiez votre solution dans le wiki => https://debian-facile.org/accueil palestine.png

Hors ligne

#25 30-09-2020 11:35:11

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

un peu en désespoir de cause , au pif , peux tu nous communiquer les fichiers complets : ?

cat ~/.local/share/xorg/Xorg.0.log

(fais très attention au "tilde")

cat /var/log/Xorg.0.log

Hors ligne

Pied de page des forums