Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 30-09-2020 13:54:08

--gilles--
Membre
Lieu : Orléans - La Source
Distrib. : debian 11
Noyau : Linux 5.9.0-4-amd64
(G)UI : mutter 3.38.1-2
Inscription : 15-02-2016

Re : [abandon] plantage total au démarrage serveur graphique

Il y a aussi à voir :

journalctl --pager -r -p err




systemd-analyze blame




Regarder cat /var/log/messages  à l'heure et à la minute du plantage genre :
cat /var/log/messages | grep "Oct  1 11:37"

À  la place de "Oct  1 11:37", il faut mettre l'abrégé du mois en anglais, le jour et l'heure du plantage.

Je laisse les autres analyser le résultat de ces commandes.

Dernière modification par --gilles-- (30-09-2020 13:59:13)


Nos vies commencent à prendre fin le jour où nous devenons silencieux à propos des choses qui comptent. Martin Luther King

Hors ligne

#27 30-09-2020 15:40:00

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour
deux gpu donc on commence part en isoler un


*-display
             description: VGA compatible controller
             produit: HD Graphics 520
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
 


intel cool driver libre , on met le firmware "firmware-misc-nofree"


 *-display
                description: Display controller
                produit: Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445]
                fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
 



ampd cool driver libre , on met le firmware "firmware-amd-graphics

comme il faut bien commencer par quelque chose on désactive amd
sur grub "radeon.modeset=0"
on le blacklist  "blacklist radeon"

on regarde comment se comporte intel (toujours pas vue de Xorg.0.log exploitable )

quand c'est bon on passe sur la radeon (et savoir comment on va faire le switch entre intel et  amd )
encore une fois si il arrive a l'invite de connexion avec un serveur X (le driver video est chargé sinon écran noir )
je veut contrarier personne mais wayland en driver libre c'est le top , il suffit d installer le switch pour basculer de l'un a l autre (désolé mais pas l'habitude sur ce genre de souci )
Wayland utilise le modeset (modesetting) du noyau , si le matériel est bien initialisé ça tourne parfaitement.
avec wayland  pas une histoire de "prime" ou un truc dans ce genre ?
a priori fonctionne bien sous gnome + wayland

par exemple :


For systems that have both an integrated GPU and a dedicated GPU, this
package by default will force the integrated GPU to be used to save power.

You can launch individual apps using the dedicated GPU by running them
with the environment variable DRI_PRIME=1. Or you can right-click on the
app (while it's not running) in GNOME Shell's Activities Overview
and choose the "Launch using Dedicated Graphics Card" option.

If this default behavior is not appropriate, uninstall this package or
set xdg.force_integrated=0 as a kernel command-line option in your
bootloader.
 



le paquet "switcheroo-control"

la première chose est de passer sur le bureau avec le gpu intel  (il a la main a partir de l'invite de connexion pour installer les firmwares "Ctrl+Alt+F2" et se logger en root )
idem pour récupérer des logs

Dernière modification par robert2a (30-09-2020 16:04:27)

Hors ligne

#28 01-10-2020 07:55:10

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Pour info :

Debian Alain :

tu n'utilises que kde , comme bureau ? ou aussi gnome ?

tu as essayé d'installer et de configurer sddm ?



J'ai installé puis démarré avec sddm, ça ne change rien, mais je m'en doutais !:)
J'ai essayé plusieurs environnements graphique, même topo !!

Hors ligne

#29 01-10-2020 08:00:06

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

cat ~/.local/share/xorg/Xorg.0.log


[   107.515] (--) Log file renamed from "/home/jean-paul/.local/share/xorg/Xorg.pid-1498.log" to "/home/jean-paul/.local/share/xorg/Xorg.0.log"
[   107.539]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[   107.539] Build Operating System: Linux 4.19.0-10-amd64 x86_64 Debian
[   107.539] Current Operating System: Linux hp-probook 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) x86_64
[   107.539] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=edf1fef6-ab40-4bc9-91bf-80b0d9c76636 ro quiet
[   107.539] Build Date: 27 August 2020  08:51:48AM
[   107.539] xorg-server 2:1.20.4-1+deb10u1 (https://www.debian.org/support)
[   107.539] Current version of pixman: 0.36.0
[   107.539]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   107.539] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   107.539] (==) Log file: "/home/jean-paul/.local/share/xorg/Xorg.0.log", Time: Wed Sep 30 11:23:01 2020
[   107.556] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   107.584] (==) No Layout section.  Using the first Screen section.
[   107.584] (==) No screen section available. Using defaults.
[   107.584] (**) |-->Screen "Default Screen Section" (0)
[   107.585] (**) |   |-->Monitor "<default monitor>"
[   107.586] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   107.586] (==) Automatically adding devices
[   107.586] (==) Automatically enabling devices
[   107.586] (==) Automatically adding GPU devices
[   107.586] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   107.586] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   107.586]    Entry deleted from font path.
[   107.586] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[   107.586] (==) ModulePath set to "/usr/lib/xorg/modules"
[   107.586] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   107.586] (II) Loader magic: 0x563954662e20
[   107.586] (II) Module ABI versions:
[   107.586]    X.Org ANSI C Emulation: 0.4
[   107.586]    X.Org Video Driver: 24.0
[   107.586]    X.Org XInput driver : 24.1
[   107.586]    X.Org Server Extension : 10.0
[   107.589] (++) using VT number 2

[   107.595] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[   107.597] (II) xfree86: Adding drm device (/dev/dri/card0)
[   107.600] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[   107.601] (II) xfree86: Adding drm device (/dev/dri/card1)
[   107.604] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[   107.610] (--) PCI:*(0@0:2:0) 8086:1916:103c:8102 rev 7, Mem @ 0xe1000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   107.610] (--) PCI: (1@0:0:0) 1002:6900:103c:811c rev 131, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xe2000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[   107.610] (II) LoadModule: "glx"
[   107.627] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   107.678] (II) Module glx: vendor="X.Org Foundation"
[   107.678]    compiled for 1.20.4, module version = 1.0.0
[   107.678]    ABI class: X.Org Server Extension, version 10.0
[   107.678] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[   107.678]    loading driver: amdgpu
[   107.678] (==) Matched amdgpu as autoconfigured driver 0
[   107.678] (==) Matched ati as autoconfigured driver 1
[   107.678] (==) Matched modesetting as autoconfigured driver 2
[   107.678] (==) Matched fbdev as autoconfigured driver 3
[   107.678] (==) Matched vesa as autoconfigured driver 4
[   107.678] (==) Assigned the driver to the xf86ConfigLayout
[   107.678] (II) LoadModule: "amdgpu"
[   107.679] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[   107.691] (II) Module amdgpu: vendor="X.Org Foundation"
[   107.692]    compiled for 1.20.3, module version = 18.1.99
[   107.692]    Module class: X.Org Video Driver
[   107.692]    ABI class: X.Org Video Driver, version 24.0
[   107.692] (II) LoadModule: "ati"
[   107.692] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   107.702] (II) Module ati: vendor="X.Org Foundation"
[   107.702]    compiled for 1.20.4, module version = 19.0.1
[   107.702]    Module class: X.Org Video Driver
[   107.702]    ABI class: X.Org Video Driver, version 24.0
[   107.703] (II) LoadModule: "modesetting"
[   107.703] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   107.713] (II) Module modesetting: vendor="X.Org Foundation"
[   107.713]    compiled for 1.20.4, module version = 1.20.4
[   107.713]    Module class: X.Org Video Driver
[   107.713]    ABI class: X.Org Video Driver, version 24.0
[   107.713] (II) LoadModule: "fbdev"
[   107.713] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   107.714] (II) Module fbdev: vendor="X.Org Foundation"
[   107.714]    compiled for 1.20.0, module version = 0.5.0
[   107.714]    Module class: X.Org Video Driver
[   107.714]    ABI class: X.Org Video Driver, version 24.0
[   107.714] (II) LoadModule: "vesa"
[   107.714] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   107.715] (II) Module vesa: vendor="X.Org Foundation"
[   107.715]    compiled for 1.20.1, module version = 2.4.0
[   107.715]    Module class: X.Org Video Driver
[   107.715]    ABI class: X.Org Video Driver, version 24.0
[   107.715] (II) AMDGPU: Driver for AMD Radeon:
        All GPUs supported by the amdgpu kernel driver
[   107.715] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   107.715] (II) FBDEV: driver for framebuffer: fbdev
[   107.715] (II) VESA: driver for VESA chipsets: vesa
[   107.715] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   107.715] (II) modeset(0): using drv /dev/dri/card0
[   107.715] (WW) Falling back to old probe method for fbdev
[   107.715] (II) Loading sub module "fbdevhw"
[   107.715] (II) LoadModule: "fbdevhw"
[   107.716] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   107.727] (II) Module fbdevhw: vendor="X.Org Foundation"
[   107.727]    compiled for 1.20.4, module version = 0.0.2
[   107.727]    ABI class: X.Org Video Driver, version 24.0
[   107.727] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   107.727] (II) modeset(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   107.727] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   107.728] (==) modeset(0): RGB weight 888
[   107.728] (==) modeset(0): Default visual is TrueColor
[   107.728] (II) Loading sub module "glamoregl"
[   107.728] (II) LoadModule: "glamoregl"
[   107.728] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   107.751] (II) Module glamoregl: vendor="X.Org Foundation"
[   107.751]    compiled for 1.20.4, module version = 1.0.1
[   107.751]    ABI class: X.Org ANSI C Emulation, version 0.4
[   107.795] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 520 (Skylake GT2)
[   107.795] (II) modeset(0): glamor initialized
[   107.796] (II) modeset(0): Output eDP-1 has no monitor section
[   107.801] (II) modeset(0): Output HDMI-1 has no monitor section
[   107.811] (II) modeset(0): Output DP-1 has no monitor section
[   107.815] (II) modeset(0): Output HDMI-2 has no monitor section
[   107.816] (II) modeset(0): EDID for output eDP-1
[   107.816] (II) modeset(0): Manufacturer: CMN  Model: 1738  Serial#: 0
[   107.816] (II) modeset(0): Year: 2015  Week: 12
[   107.816] (II) modeset(0): EDID Version: 1.4
[   107.816] (II) modeset(0): Digital Display Input
[   107.816] (II) modeset(0): 6 bits per channel
[   107.816] (II) modeset(0): Digital interface is DisplayPort
[   107.816] (II) modeset(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[   107.816] (II) modeset(0): Gamma: 2.20
[   107.816] (II) modeset(0): No DPMS capabilities specified
[   107.816] (II) modeset(0): Supported color encodings: RGB 4:4:4
[   107.816] (II) modeset(0): First detailed timing is preferred mode
[   107.816] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   107.816] (II) modeset(0): redX: 0.646 redY: 0.338   greenX: 0.316 greenY: 0.614
[   107.816] (II) modeset(0): blueX: 0.157 blueY: 0.044   whiteX: 0.313 whiteY: 0.329
[   107.816] (II) modeset(0): Manufacturer's mask: 0
[   107.816] (II) modeset(0): Supported detailed timing:
[   107.816] (II) modeset(0): clock: 152.8 MHz   Image Size:  381 x 214 mm
[   107.816] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2250 h_border: 0
[   107.816] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1132 v_border: 0
[   107.816] (II) modeset(0): Supported detailed timing:
[   107.816] (II) modeset(0): clock: 101.9 MHz   Image Size:  381 x 214 mm
[   107.816] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2250 h_border: 0
[   107.816] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1132 v_border: 0
[   107.816] (II) modeset(0): Unknown vendor-specific block 2
[   107.816] (II) modeset(0): EDID (in hex):
[   107.816] (II) modeset(0):   00ffffffffffff000dae381700000000
[   107.816] (II) modeset(0):   0c1901049526157802a155a556519d28
[   107.816] (II) modeset(0):   0b505400000001010101010101010101
[   107.816] (II) modeset(0):   010101010101b43b804a713834403020
[   107.816] (II) modeset(0):   35007dd61000001acd27804a71383440
[   107.816] (II) modeset(0):   302035007dd61000001a000000000000
[   107.816] (II) modeset(0):   00000000000000000000000000000002
[   107.816] (II) modeset(0):   000c33ff0f3c96161d489600000000db
[   107.817] (II) modeset(0): Printing probed modes for output eDP-1
[   107.817] (II) modeset(0): Modeline "1920x1080"x60.0  152.84  1920 1968 2000 2250  1080 1083 1088 1132 +hsync -vsync (67.9 kHz eP)
[   107.817] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[   107.817] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[   107.817] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[   107.817] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[   107.817] (II) modeset(0): Modeline "1920x1080"x40.0  101.89  1920 1968 2000 2250  1080 1083 1088 1132 +hsync -vsync (45.3 kHz e)
[   107.817] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[   107.817] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[   107.817] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[   107.817] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   107.817] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[   107.817] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[   107.817] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[   107.817] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   107.817] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[   107.817] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[   107.817] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   107.817] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[   107.817] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[   107.817] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[   107.817] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[   107.817] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[   107.817] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[   107.817] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   107.817] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   107.817] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   107.817] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   107.817] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   107.817] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   107.817] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   107.817] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[   107.817] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[   107.817] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   107.817] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   107.817] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[   107.817] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   107.817] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[   107.817] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   107.817] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   107.817] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   107.817] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   107.817] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   107.817] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   107.817] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   107.817] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   107.817] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   107.817] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   107.817] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[   107.817] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   107.818] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[   107.818] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[   107.818] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   107.818] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[   107.818] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[   107.818] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[   107.818] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   107.818] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   107.818] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   107.818] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   107.818] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[   107.818] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[   107.818] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[   107.818] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[   107.818] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[   107.818] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[   107.818] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[   107.818] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[   107.818] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[   107.818] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   107.818] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   107.818] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   107.818] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[   107.818] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[   107.818] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[   107.818] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[   107.818] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   107.818] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   107.818] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[   107.818] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[   107.818] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   107.818] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[   107.818] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[   107.818] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[   107.818] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[   107.821] (II) modeset(0): EDID for output HDMI-1
[   107.832] (II) modeset(0): EDID for output DP-1
[   107.832] (II) modeset(0): Printing probed modes for output DP-1
[   107.832] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   107.832] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   107.832] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   107.832] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[   107.832] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   107.835] (II) modeset(0): EDID for output HDMI-2
[   107.835] (II) modeset(0): Output eDP-1 connected
[   107.835] (II) modeset(0): Output HDMI-1 disconnected
[   107.835] (II) modeset(0): Output DP-1 connected
[   107.835] (II) modeset(0): Output HDMI-2 disconnected
[   107.835] (II) modeset(0): Using fuzzy aspect match for initial modes
[   107.835] (II) modeset(0): Output eDP-1 using initial mode 1024x768 +0+0
[   107.835] (II) modeset(0): Output DP-1 using initial mode 1024x768 +0+0
[   107.835] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   107.835] (==) modeset(0): DPI set to (96, 96)
[   107.835] (II) Loading sub module "fb"
[   107.835] (II) LoadModule: "fb"
[   107.848] (II) Loading /usr/lib/xorg/modules/libfb.so
[   107.861] (II) Module fb: vendor="X.Org Foundation"
[   107.861]    compiled for 1.20.4, module version = 1.0.0
[   107.861]    ABI class: X.Org ANSI C Emulation, version 0.4
[   107.861] (==) AMDGPU(G0): Depth 24, (--) framebuffer bpp 32
[   107.861] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   107.861] (==) AMDGPU(G0): Default visual is TrueColor
[   107.861] (==) AMDGPU(G0): RGB weight 888
[   107.861] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC)
[   107.861] (--) AMDGPU(G0): Chipset: "AMD Radeon (TM) R7 M340" (ChipID = 0x6900)
[   107.861] (II) Loading sub module "fb"
[   107.861] (II) LoadModule: "fb"
[   107.861] (II) Loading /usr/lib/xorg/modules/libfb.so
[   107.861] (II) Module fb: vendor="X.Org Foundation"
[   107.861]    compiled for 1.20.4, module version = 1.0.0
[   107.861]    ABI class: X.Org ANSI C Emulation, version 0.4
[   107.861] (II) Loading sub module "dri2"
[   107.861] (II) LoadModule: "dri2"
[   107.861] (II) Module "dri2" already built-in
[   107.946] (II) Loading sub module "glamoregl"
[   107.946] (II) LoadModule: "glamoregl"
[   107.946] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   107.946] (II) Module glamoregl: vendor="X.Org Foundation"
[   107.946]    compiled for 1.20.4, module version = 1.0.1
[   107.946]    ABI class: X.Org ANSI C Emulation, version 0.4
[   107.956] (II) AMDGPU(G0): glamor X acceleration enabled on AMD Radeon (TM) R7 M340 (ICELAND, DRM 3.27.0, 4.19.0-6-amd64, LLVM 7.0.1)
[   107.956] (II) AMDGPU(G0): glamor detected, initialising EGL layer.
[   107.956] (==) AMDGPU(G0): TearFree property default: auto
[   107.956] (==) AMDGPU(G0): VariableRefresh: disabled
[   107.956] (II) AMDGPU(G0): mem size init: gart size :bfd75000 vram size: s:3feb4000 visible:feb4000
[   107.956] (==) AMDGPU(G0): DPI set to (96, 96)
[   107.956] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0)
[   107.956] (II) Loading sub module "ramdac"
[   107.956] (II) LoadModule: "ramdac"
[   107.956] (II) Module "ramdac" already built-in
[   107.956] (II) UnloadModule: "fbdev"
[   107.956] (II) Unloading fbdev
[   107.956] (II) UnloadSubModule: "fbdevhw"
[   107.956] (II) Unloading fbdevhw
[   107.956] (II) UnloadModule: "vesa"
[   107.956] (II) Unloading vesa
[   107.961] (II) AMDGPU(G0): [DRI2] Setup complete
[   107.961] (II) AMDGPU(G0): [DRI2]   DRI driver: radeonsi
[   107.961] (II) AMDGPU(G0): [DRI2]   VDPAU driver: radeonsi
[   107.961] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[   107.962] (==) AMDGPU(G0): Backing store enabled
[   107.962] (II) AMDGPU(G0): Direct rendering enabled
[   108.476] (II) AMDGPU(G0): Use GLAMOR acceleration.
[   108.476] (II) AMDGPU(G0): Acceleration enabled
[   108.476] (==) AMDGPU(G0): DPMS enabled
[   108.476] (==) AMDGPU(G0): Silken mouse enabled
[   108.594] (==) modeset(0): Backing store enabled
[   108.594] (==) modeset(0): Silken mouse enabled
[   108.704] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   108.705] (==) modeset(0): DPMS enabled
[   108.706] (II) modeset(0): [DRI2] Setup complete
[   108.706] (II) modeset(0): [DRI2]   DRI driver: i965
[   108.706] (II) modeset(0): [DRI2]   VDPAU driver: i965
[   108.706] (II) Initializing extension Generic Event Extension
[   108.707] (II) Initializing extension SHAPE
[   108.707] (II) Initializing extension MIT-SHM
[   108.707] (II) Initializing extension XInputExtension
[   108.708] (II) Initializing extension XTEST
[   108.708] (II) Initializing extension BIG-REQUESTS
[   108.709] (II) Initializing extension SYNC
[   108.709] (II) Initializing extension XKEYBOARD
[   108.710] (II) Initializing extension XC-MISC
[   108.710] (II) Initializing extension SECURITY
[   108.710] (II) Initializing extension XFIXES
[   108.711] (II) Initializing extension RENDER
[   108.711] (II) Initializing extension RANDR
[   108.712] (II) Initializing extension COMPOSITE
[   108.712] (II) Initializing extension DAMAGE
[   108.712] (II) Initializing extension MIT-SCREEN-SAVER
[   108.713] (II) Initializing extension DOUBLE-BUFFER
[   108.713] (II) Initializing extension RECORD
[   108.713] (II) Initializing extension DPMS
[   108.714] (II) Initializing extension Present
[   108.714] (II) Initializing extension DRI3
[   108.714] (II) Initializing extension X-Resource
[   108.715] (II) Initializing extension XVideo
[   108.715] (II) Initializing extension XVideo-MotionCompensation
[   108.715] (II) Initializing extension SELinux
[   108.715] (II) SELinux: Disabled on system
[   108.715] (II) Initializing extension GLX
[   108.730] (II) AIGLX: Loaded and initialized i965
[   108.730] (II) GLX: Initialized DRI2 GL provider for screen 0
[   108.730] (II) Initializing extension XFree86-VidModeExtension
[   108.730] (II) Initializing extension XFree86-DGA
[   108.731] (II) Initializing extension XFree86-DRI
[   108.731] (II) Initializing extension DRI2
[   108.751] (II) modeset(0): Damage tracking initialized
[   108.751] (II) modeset(0): Setting screen physical size to 270 x 203
[   108.899] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   108.899] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   108.899] (II) LoadModule: "libinput"
[   108.899] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   108.920] (II) Module libinput: vendor="X.Org Foundation"
[   108.920]    compiled for 1.20.4, module version = 0.28.2
[   108.920]    Module class: X.Org XInput Driver
[   108.920]    ABI class: X.Org XInput driver, version 24.1
[   108.920] (II) Using input driver 'libinput' for 'Power Button'
[   108.921] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0
[   108.922] (**) Power Button: always reports core events
[   108.922] (**) Option "Device" "/dev/input/event5"
[   108.922] (**) Option "_source" "server/udev"
[   108.923] (II) event5  - Power Button: is tagged by udev as: Keyboard
[   108.923] (II) event5  - Power Button: device is a keyboard
[   108.924] (II) event5  - Power Button: device removed
[   108.924] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event5"
[   108.924] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   108.924] (**) Option "xkb_model" "pc105"
[   108.924] (**) Option "xkb_layout" "fr"
[   108.924] (**) Option "xkb_variant" "latin9"
[   108.948] (II) event5  - Power Button: is tagged by udev as: Keyboard
[   108.948] (II) event5  - Power Button: device is a keyboard
[   108.948] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[   108.948] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   108.948] (II) Using input driver 'libinput' for 'Video Bus'
[   108.950] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 30 paused 0
[   108.950] (**) Video Bus: always reports core events
[   108.950] (**) Option "Device" "/dev/input/event9"
[   108.950] (**) Option "_source" "server/udev"
[   108.951] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[   108.951] (II) event9  - Video Bus: device is a keyboard
[   108.951] (II) event9  - Video Bus: device removed
[   108.951] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event9"
[   108.951] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   108.951] (**) Option "xkb_model" "pc105"
[   108.951] (**) Option "xkb_layout" "fr"
[   108.951] (**) Option "xkb_variant" "latin9"
[   108.952] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[   108.952] (II) event9  - Video Bus: device is a keyboard
[   108.953] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[   108.953] (II) No input driver specified, ignoring this device.
[   108.953] (II) This device may have been added with another device file.
[   108.953] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   108.953] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   108.953] (II) Using input driver 'libinput' for 'Sleep Button'
[   108.955] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[   108.955] (**) Sleep Button: always reports core events
[   108.955] (**) Option "Device" "/dev/input/event3"
[   108.955] (**) Option "_source" "server/udev"
[   108.956] (II) event3  - Sleep Button: is tagged by udev as: Keyboard
[   108.956] (II) event3  - Sleep Button: device is a keyboard
[   108.956] (II) event3  - Sleep Button: device removed
[   108.956] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3"
[   108.956] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   108.956] (**) Option "xkb_model" "pc105"
[   108.956] (**) Option "xkb_layout" "fr"
[   108.956] (**) Option "xkb_variant" "latin9"
[   108.958] (II) event3  - Sleep Button: is tagged by udev as: Keyboard
[   108.958] (II) event3  - Sleep Button: device is a keyboard
[   108.959] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[   108.959] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[   108.959] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[   108.961] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 32 paused 0
[   108.961] (**) Logitech USB Optical Mouse: always reports core events
[   108.961] (**) Option "Device" "/dev/input/event1"
[   108.961] (**) Option "_source" "server/udev"
[   108.962] (II) event1  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   108.962] (II) event1  - Logitech USB Optical Mouse: device is a pointer
[   108.963] (II) event1  - Logitech USB Optical Mouse: device removed
[   108.963] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C077.0001/input/input8/event1"
[   108.963] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[   108.963] (**) Option "AccelerationScheme" "none"
[   108.963] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[   108.963] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[   108.963] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[   108.964] (II) event1  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   108.964] (II) event1  - Logitech USB Optical Mouse: device is a pointer
[   108.965] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[   108.965] (II) No input driver specified, ignoring this device.
[   108.965] (II) This device may have been added with another device file.
[   108.966] (II) config/udev: Adding input device HP HD Camera: HP HD Camera (/dev/input/event17)
[   108.966] (**) HP HD Camera: HP HD Camera: Applying InputClass "libinput keyboard catchall"
[   108.966] (II) Using input driver 'libinput' for 'HP HD Camera: HP HD Camera'
[   108.968] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 33 paused 0
[   108.968] (**) HP HD Camera: HP HD Camera: always reports core events
[   108.968] (**) Option "Device" "/dev/input/event17"
[   108.968] (**) Option "_source" "server/udev"
[   108.969] (II) event17 - HP HD Camera: HP HD Camera: is tagged by udev as: Keyboard
[   108.969] (II) event17 - HP HD Camera: HP HD Camera: device is a keyboard
[   108.969] (II) event17 - HP HD Camera: HP HD Camera: device removed
[   108.969] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input24/event17"
[   108.969] (II) XINPUT: Adding extended input device "HP HD Camera: HP HD Camera" (type: KEYBOARD, id 10)
[   108.969] (**) Option "xkb_model" "pc105"
[   108.969] (**) Option "xkb_layout" "fr"
[   108.969] (**) Option "xkb_variant" "latin9"
[   108.971] (II) event17 - HP HD Camera: HP HD Camera: is tagged by udev as: Keyboard
[   108.971] (II) event17 - HP HD Camera: HP HD Camera: device is a keyboard
[   108.972] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[   108.972] (II) No input driver specified, ignoring this device.
[   108.972] (II) This device may have been added with another device file.
[   108.972] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[   108.972] (II) No input driver specified, ignoring this device.
[   108.972] (II) This device may have been added with another device file.
[   108.973] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[   108.973] (II) No input driver specified, ignoring this device.
[   108.973] (II) This device may have been added with another device file.
[   108.973] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[   108.973] (II) No input driver specified, ignoring this device.
[   108.973] (II) This device may have been added with another device file.
[   108.973] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[   108.974] (II) No input driver specified, ignoring this device.
[   108.974] (II) This device may have been added with another device file.
[   108.974] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event16)
[   108.974] (II) No input driver specified, ignoring this device.
[   108.974] (II) This device may have been added with another device file.
[   108.975] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   108.975] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   108.975] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   108.977] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 34 paused 0
[   108.977] (**) AT Translated Set 2 keyboard: always reports core events
[   108.977] (**) Option "Device" "/dev/input/event0"
[   108.977] (**) Option "_source" "server/udev"
[   108.979] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   108.979] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   108.979] (II) event0  - AT Translated Set 2 keyboard: device removed
[   108.979] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   108.979] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   108.979] (**) Option "xkb_model" "pc105"
[   108.979] (**) Option "xkb_layout" "fr"
[   108.979] (**) Option "xkb_variant" "latin9"
[   108.980] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   108.980] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   108.981] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[   108.981] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   108.981] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[   108.983] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0
[   108.983] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   108.983] (**) Option "Device" "/dev/input/event2"
[   108.983] (**) Option "_source" "server/udev"
[   108.984] (II) event2  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[   108.985] (II) event2  - SynPS/2 Synaptics TouchPad: device is a touchpad
[   108.986] (II) event2  - SynPS/2 Synaptics TouchPad: device removed
[   108.986] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input7/event2"
[   108.986] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   108.986] (**) Option "AccelerationScheme" "none"
[   108.987] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   108.987] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   108.987] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   108.988] (II) event2  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[   108.989] (II) event2  - SynPS/2 Synaptics TouchPad: device is a touchpad
[   108.989] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   108.990] (II) No input driver specified, ignoring this device.
[   108.990] (II) This device may have been added with another device file.
[   108.990] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event10)
[   108.990] (II) No input driver specified, ignoring this device.
[   108.990] (II) This device may have been added with another device file.
[   108.990] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[   108.990] (II) No input driver specified, ignoring this device.
[   108.990] (II) This device may have been added with another device file.
[   108.991] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   108.991] (II) No input driver specified, ignoring this device.
[   108.991] (II) This device may have been added with another device file.
[   108.992] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event7)
[   108.992] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[   108.992] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[   108.993] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 36 paused 0
[   108.993] (**) HP Wireless hotkeys: always reports core events
[   108.993] (**) Option "Device" "/dev/input/event7"
[   108.993] (**) Option "_source" "server/udev"
[   108.994] (II) event7  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[   108.994] (II) event7  - HP Wireless hotkeys: device is a keyboard
[   108.994] (II) event7  - HP Wireless hotkeys: device removed
[   108.994] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event7"
[   108.994] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[   108.994] (**) Option "xkb_model" "pc105"
[   108.994] (**) Option "xkb_layout" "fr"
[   108.994] (**) Option "xkb_variant" "latin9"
[   108.995] (II) event7  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[   108.995] (II) event7  - HP Wireless hotkeys: device is a keyboard
[   108.996] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[   108.996] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   108.996] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[   108.997] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 37 paused 0
[   108.997] (**) HP WMI hotkeys: always reports core events
[   108.997] (**) Option "Device" "/dev/input/event8"
[   108.997] (**) Option "_source" "server/udev"
[   108.998] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[   108.998] (II) event8  - HP WMI hotkeys: device is a keyboard
[   108.998] (II) event8  - HP WMI hotkeys: device removed
[   108.998] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event8"
[   108.998] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[   108.998] (**) Option "xkb_model" "pc105"
[   108.998] (**) Option "xkb_layout" "fr"
[   108.998] (**) Option "xkb_variant" "latin9"
[   108.999] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[   108.999] (II) event8  - HP WMI hotkeys: device is a keyboard
[   120.657] (II) modeset(0): Allocate new frame buffer 2944x1080 stride
[   527.188] (**) Option "fd" "27"
[   527.188] (II) event5  - Power Button: device removed
[   527.188] (**) Option "fd" "30"
[   527.188] (II) event9  - Video Bus: device removed
[   527.188] (**) Option "fd" "31"
[   527.188] (II) event3  - Sleep Button: device removed
[   527.188] (**) Option "fd" "32"
[   527.188] (II) event1  - Logitech USB Optical Mouse: device removed
[   527.189] (**) Option "fd" "33"
[   527.189] (II) event17 - HP HD Camera: HP HD Camera: device removed
[   527.189] (**) Option "fd" "34"
[   527.189] (II) event0  - AT Translated Set 2 keyboard: device removed
[   527.189] (**) Option "fd" "35"
[   527.189] (II) event2  - SynPS/2 Synaptics TouchPad: device removed
[   527.189] (**) Option "fd" "36"
[   527.189] (II) event7  - HP Wireless hotkeys: device removed
[   527.189] (**) Option "fd" "37"
[   527.189] (II) event8  - HP WMI hotkeys: device removed
[   527.203] (II) UnloadModule: "libinput"
[   527.203] (II) systemd-logind: releasing fd for 13:72
[   527.317] (II) UnloadModule: "libinput"
[   527.318] (II) systemd-logind: releasing fd for 13:71
[   527.357] (II) UnloadModule: "libinput"
[   527.358] (II) systemd-logind: releasing fd for 13:66
[   527.394] (II) UnloadModule: "libinput"
[   527.394] (II) systemd-logind: releasing fd for 13:64
[   527.409] (II) UnloadModule: "libinput"
[   527.410] (II) systemd-logind: releasing fd for 13:81
[   527.449] (II) UnloadModule: "libinput"
[   527.449] (II) systemd-logind: releasing fd for 13:65
[   527.498] (II) UnloadModule: "libinput"
[   527.498] (II) systemd-logind: releasing fd for 13:67
[   527.526] (II) UnloadModule: "libinput"
[   527.526] (II) systemd-logind: releasing fd for 13:73
[   527.574] (II) UnloadModule: "libinput"
[   527.574] (II) systemd-logind: releasing fd for 13:69
[   527.603] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   527.603] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   527.603] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   529.086] (II) Server terminated successfully (0). Closing log file.

Hors ligne

#30 01-10-2020 08:02:30

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

cat /var/log/Xorg.0.log


[    38.161] (--) Log file renamed from "/var/log/Xorg.pid-967.log" to "/var/log/Xorg.0.log"
[    38.247]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    38.247] Build Operating System: Linux 4.19.0-10-amd64 x86_64 Debian
[    38.247] Current Operating System: Linux hp-probook 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) x86_64
[    38.247] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=edf1fef6-ab40-4bc9-91bf-80b0d9c76636 ro quiet
[    38.248] Build Date: 27 August 2020  08:51:48AM
[    38.248] xorg-server 2:1.20.4-1+deb10u1 (https://www.debian.org/support)
[    38.248] Current version of pixman: 0.36.0
[    38.248]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    38.248] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    38.248] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  1 08:05:29 2020
[    38.423] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    38.596] (==) No Layout section.  Using the first Screen section.
[    38.596] (==) No screen section available. Using defaults.
[    38.596] (**) |-->Screen "Default Screen Section" (0)
[    38.596] (**) |   |-->Monitor "<default monitor>"
[    38.620] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    38.620] (==) Automatically adding devices
[    38.620] (==) Automatically enabling devices
[    38.620] (==) Automatically adding GPU devices
[    38.620] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    38.662] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    38.662]    Entry deleted from font path.
[    38.716] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[    38.716] (==) ModulePath set to "/usr/lib/xorg/modules"
[    38.716] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    38.716] (II) Loader magic: 0x55ebf1409e20
[    38.716] (II) Module ABI versions:
[    38.716]    X.Org ANSI C Emulation: 0.4
[    38.716]    X.Org Video Driver: 24.0
[    38.716]    X.Org XInput driver : 24.1
[    38.716]    X.Org Server Extension : 10.0
[    38.717] (++) using VT number 7

[    38.718] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    38.719] (II) xfree86: Adding drm device (/dev/dri/card0)
[    38.724] (II) xfree86: Adding drm device (/dev/dri/card1)
[    38.731] (--) PCI:*(0@0:2:0) 8086:1916:103c:8102 rev 7, Mem @ 0xe1000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    38.731] (--) PCI: (1@0:0:0) 1002:6900:103c:811c rev 131, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xe2000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    38.731] (II) LoadModule: "glx"
[    38.738] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    39.231] (II) Module glx: vendor="X.Org Foundation"
[    39.231]    compiled for 1.20.4, module version = 1.0.0
[    39.231]    ABI class: X.Org Server Extension, version 10.0
[    39.231] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[    39.231]    loading driver: amdgpu
[    39.231] (==) Matched amdgpu as autoconfigured driver 0
[    39.231] (==) Matched ati as autoconfigured driver 1
[    39.231] (==) Matched modesetting as autoconfigured driver 2
[    39.231] (==) Matched fbdev as autoconfigured driver 3
[    39.231] (==) Matched vesa as autoconfigured driver 4
[    39.231] (==) Assigned the driver to the xf86ConfigLayout
[    39.231] (II) LoadModule: "amdgpu"
[    39.237] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    39.690] (II) Module amdgpu: vendor="X.Org Foundation"
[    39.690]    compiled for 1.20.3, module version = 18.1.99
[    39.690]    Module class: X.Org Video Driver
[    39.690]    ABI class: X.Org Video Driver, version 24.0
[    39.690] (II) LoadModule: "ati"
[    39.691] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    39.802] (II) Module ati: vendor="X.Org Foundation"
[    39.802]    compiled for 1.20.4, module version = 19.0.1
[    39.802]    Module class: X.Org Video Driver
[    39.802]    ABI class: X.Org Video Driver, version 24.0
[    39.824] (II) LoadModule: "modesetting"
[    39.824] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    39.846] (II) Module modesetting: vendor="X.Org Foundation"
[    39.846]    compiled for 1.20.4, module version = 1.20.4
[    39.846]    Module class: X.Org Video Driver
[    39.846]    ABI class: X.Org Video Driver, version 24.0
[    39.846] (II) LoadModule: "fbdev"
[    39.846] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    39.847] (II) Module fbdev: vendor="X.Org Foundation"
[    39.847]    compiled for 1.20.0, module version = 0.5.0
[    39.847]    Module class: X.Org Video Driver
[    39.847]    ABI class: X.Org Video Driver, version 24.0
[    39.847] (II) LoadModule: "vesa"
[    39.847] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    39.847] (II) Module vesa: vendor="X.Org Foundation"
[    39.847]    compiled for 1.20.1, module version = 2.4.0
[    39.847]    Module class: X.Org Video Driver
[    39.847]    ABI class: X.Org Video Driver, version 24.0
[    39.848] (II) AMDGPU: Driver for AMD Radeon:
        All GPUs supported by the amdgpu kernel driver
[    39.848] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    39.848] (II) FBDEV: driver for framebuffer: fbdev
[    39.848] (II) VESA: driver for VESA chipsets: vesa
[    39.873] (II) modeset(0): using drv /dev/dri/card0
[    39.873] (WW) Falling back to old probe method for fbdev
[    39.873] (II) Loading sub module "fbdevhw"
[    39.873] (II) LoadModule: "fbdevhw"
[    39.874] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    39.882] (II) Module fbdevhw: vendor="X.Org Foundation"
[    39.882]    compiled for 1.20.4, module version = 0.0.2
[    39.882]    ABI class: X.Org Video Driver, version 24.0
[    39.882] (II) AMDGPU(G0): [KMS] Kernel modesetting enabled.
[    39.957] (II) modeset(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    39.957] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    39.957] (==) modeset(0): RGB weight 888
[    39.957] (==) modeset(0): Default visual is TrueColor
[    39.957] (II) Loading sub module "glamoregl"
[    39.957] (II) LoadModule: "glamoregl"
[    39.958] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    40.040] (II) Module glamoregl: vendor="X.Org Foundation"
[    40.041]    compiled for 1.20.4, module version = 1.0.1
[    40.041]    ABI class: X.Org ANSI C Emulation, version 0.4
[    41.576] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 520 (Skylake GT2)
[    41.576] (II) modeset(0): glamor initialized
[    41.578] (II) modeset(0): Output eDP-1 has no monitor section
[    41.582] (II) modeset(0): Output HDMI-1 has no monitor section
[    41.582] (II) modeset(0): Output DP-1 has no monitor section
[    41.586] (II) modeset(0): Output HDMI-2 has no monitor section
[    41.589] (II) modeset(0): EDID for output eDP-1
[    41.589] (II) modeset(0): Manufacturer: CMN  Model: 1738  Serial#: 0
[    41.589] (II) modeset(0): Year: 2015  Week: 12
[    41.589] (II) modeset(0): EDID Version: 1.4
[    41.589] (II) modeset(0): Digital Display Input
[    41.589] (II) modeset(0): 6 bits per channel
[    41.589] (II) modeset(0): Digital interface is DisplayPort
[    41.589] (II) modeset(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[    41.589] (II) modeset(0): Gamma: 2.20
[    41.589] (II) modeset(0): No DPMS capabilities specified
[    41.589] (II) modeset(0): Supported color encodings: RGB 4:4:4
[    41.589] (II) modeset(0): First detailed timing is preferred mode
[    41.589] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    41.589] (II) modeset(0): redX: 0.646 redY: 0.338   greenX: 0.316 greenY: 0.614
[    41.589] (II) modeset(0): blueX: 0.157 blueY: 0.044   whiteX: 0.313 whiteY: 0.329
[    41.589] (II) modeset(0): Manufacturer's mask: 0
[    41.589] (II) modeset(0): Supported detailed timing:
[    41.589] (II) modeset(0): clock: 152.8 MHz   Image Size:  381 x 214 mm
[    41.589] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2250 h_border: 0
[    41.589] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1132 v_border: 0
[    41.589] (II) modeset(0): Supported detailed timing:
[    41.589] (II) modeset(0): clock: 101.9 MHz   Image Size:  381 x 214 mm
[    41.589] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2250 h_border: 0
[    41.589] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1132 v_border: 0
[    41.589] (II) modeset(0): Unknown vendor-specific block 2
[    41.589] (II) modeset(0): EDID (in hex):
[    41.589] (II) modeset(0):   00ffffffffffff000dae381700000000
[    41.589] (II) modeset(0):   0c1901049526157802a155a556519d28
[    41.589] (II) modeset(0):   0b505400000001010101010101010101
[    41.589] (II) modeset(0):   010101010101b43b804a713834403020
[    41.589] (II) modeset(0):   35007dd61000001acd27804a71383440
[    41.589] (II) modeset(0):   302035007dd61000001a000000000000
[    41.589] (II) modeset(0):   00000000000000000000000000000002
[    41.589] (II) modeset(0):   000c33ff0f3c96161d489600000000db
[    41.590] (II) modeset(0): Printing probed modes for output eDP-1
[    41.590] (II) modeset(0): Modeline "1920x1080"x60.0  152.84  1920 1968 2000 2250  1080 1083 1088 1132 +hsync -vsync (67.9 kHz eP)
[    41.590] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    41.590] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    41.590] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    41.590] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    41.590] (II) modeset(0): Modeline "1920x1080"x40.0  101.89  1920 1968 2000 2250  1080 1083 1088 1132 +hsync -vsync (45.3 kHz e)
[    41.590] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    41.590] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    41.590] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    41.590] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    41.590] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    41.591] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    41.591] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    41.591] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    41.591] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    41.591] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    41.591] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    41.591] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    41.591] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    41.591] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    41.591] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    41.591] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    41.591] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    41.591] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    41.591] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    41.591] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    41.591] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    41.591] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    41.591] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    41.591] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    41.591] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    41.591] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    41.591] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    41.591] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    41.591] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    41.591] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    41.591] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    41.591] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    41.591] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    41.591] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    41.591] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    41.591] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    41.591] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    41.591] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    41.591] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    41.592] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    41.592] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    41.592] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    41.592] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    41.592] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    41.592] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    41.592] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    41.592] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    41.592] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    41.592] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    41.592] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    41.592] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    41.592] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    41.592] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    41.592] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    41.592] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    41.592] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    41.592] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    41.592] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    41.592] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    41.592] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    41.592] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    41.592] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    41.592] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    41.592] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    41.592] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    41.592] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    41.592] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    41.592] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    41.592] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    41.592] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    41.592] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    41.592] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    41.592] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    41.592] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    41.592] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    41.592] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    41.592] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    41.592] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    41.596] (II) modeset(0): EDID for output HDMI-1
[    41.596] (II) modeset(0): EDID for output DP-1
[    41.600] (II) modeset(0): EDID for output HDMI-2
[    41.600] (II) modeset(0): Output eDP-1 connected
[    41.600] (II) modeset(0): Output HDMI-1 disconnected
[    41.600] (II) modeset(0): Output DP-1 disconnected
[    41.600] (II) modeset(0): Output HDMI-2 disconnected
[    41.600] (II) modeset(0): Using exact sizes for initial modes
[    41.600] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[    41.600] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    41.600] (==) modeset(0): DPI set to (96, 96)
[    41.600] (II) Loading sub module "fb"
[    41.600] (II) LoadModule: "fb"
[    41.649] (II) Loading /usr/lib/xorg/modules/libfb.so
[    41.764] (II) Module fb: vendor="X.Org Foundation"
[    41.764]    compiled for 1.20.4, module version = 1.0.0
[    41.764]    ABI class: X.Org ANSI C Emulation, version 0.4
[    41.765] (==) AMDGPU(G0): Depth 24, (--) framebuffer bpp 32
[    41.765] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    41.765] (==) AMDGPU(G0): Default visual is TrueColor
[    41.765] (==) AMDGPU(G0): RGB weight 888
[    41.765] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC)
[    41.765] (--) AMDGPU(G0): Chipset: "AMD Radeon (TM) R7 M340" (ChipID = 0x6900)
[    41.765] (II) Loading sub module "fb"
[    41.765] (II) LoadModule: "fb"
[    41.765] (II) Loading /usr/lib/xorg/modules/libfb.so
[    41.765] (II) Module fb: vendor="X.Org Foundation"
[    41.765]    compiled for 1.20.4, module version = 1.0.0
[    41.765]    ABI class: X.Org ANSI C Emulation, version 0.4
[    41.765] (II) Loading sub module "dri2"
[    41.766] (II) LoadModule: "dri2"
[    41.766] (II) Module "dri2" already built-in
[    45.014] (II) Loading sub module "glamoregl"
[    45.014] (II) LoadModule: "glamoregl"
[    45.014] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    45.014] (II) Module glamoregl: vendor="X.Org Foundation"
[    45.014]    compiled for 1.20.4, module version = 1.0.1
[    45.014]    ABI class: X.Org ANSI C Emulation, version 0.4
[    45.082] (II) AMDGPU(G0): glamor X acceleration enabled on AMD Radeon (TM) R7 M340 (ICELAND, DRM 3.27.0, 4.19.0-6-amd64, LLVM 7.0.1)
[    45.082] (II) AMDGPU(G0): glamor detected, initialising EGL layer.
[    45.082] (==) AMDGPU(G0): TearFree property default: auto
[    45.083] (==) AMDGPU(G0): VariableRefresh: disabled
[    45.083] (II) AMDGPU(G0): mem size init: gart size :bfd75000 vram size: s:3feb4000 visible:feb4000
[    45.083] (==) AMDGPU(G0): DPI set to (96, 96)
[    45.083] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0)
[    45.083] (II) Loading sub module "ramdac"
[    45.083] (II) LoadModule: "ramdac"
[    45.083] (II) Module "ramdac" already built-in
[    45.083] (II) UnloadModule: "fbdev"
[    45.083] (II) Unloading fbdev
[    45.083] (II) UnloadSubModule: "fbdevhw"
[    45.083] (II) Unloading fbdevhw
[    45.083] (II) UnloadModule: "vesa"
[    45.083] (II) Unloading vesa
[    45.094] (II) AMDGPU(G0): [DRI2] Setup complete
[    45.094] (II) AMDGPU(G0): [DRI2]   DRI driver: radeonsi
[    45.094] (II) AMDGPU(G0): [DRI2]   VDPAU driver: radeonsi
[    45.095] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[    45.100] (==) AMDGPU(G0): Backing store enabled
[    45.100] (II) AMDGPU(G0): Direct rendering enabled
[    45.341] (II) AMDGPU(G0): Use GLAMOR acceleration.
[    45.341] (II) AMDGPU(G0): Acceleration enabled
[    45.341] (==) AMDGPU(G0): DPMS enabled
[    45.341] (==) AMDGPU(G0): Silken mouse enabled
[    45.463] (==) modeset(0): Backing store enabled
[    45.463] (==) modeset(0): Silken mouse enabled
[    45.507] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    45.507] (==) modeset(0): DPMS enabled
[    45.508] (II) modeset(0): [DRI2] Setup complete
[    45.508] (II) modeset(0): [DRI2]   DRI driver: i965
[    45.508] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    45.508] (II) Initializing extension Generic Event Extension
[    45.509] (II) Initializing extension SHAPE
[    45.509] (II) Initializing extension MIT-SHM
[    45.509] (II) Initializing extension XInputExtension
[    45.526] (II) Initializing extension XTEST
[    45.526] (II) Initializing extension BIG-REQUESTS
[    45.526] (II) Initializing extension SYNC
[    45.527] (II) Initializing extension XKEYBOARD
[    45.527] (II) Initializing extension XC-MISC
[    45.527] (II) Initializing extension SECURITY
[    45.528] (II) Initializing extension XFIXES
[    45.528] (II) Initializing extension RENDER
[    45.528] (II) Initializing extension RANDR
[    45.529] (II) Initializing extension COMPOSITE
[    45.529] (II) Initializing extension DAMAGE
[    45.529] (II) Initializing extension MIT-SCREEN-SAVER
[    45.530] (II) Initializing extension DOUBLE-BUFFER
[    45.530] (II) Initializing extension RECORD
[    45.530] (II) Initializing extension DPMS
[    45.531] (II) Initializing extension Present
[    45.531] (II) Initializing extension DRI3
[    45.531] (II) Initializing extension X-Resource
[    45.532] (II) Initializing extension XVideo
[    45.532] (II) Initializing extension XVideo-MotionCompensation
[    45.532] (II) Initializing extension SELinux
[    45.532] (II) SELinux: Disabled on system
[    45.532] (II) Initializing extension GLX
[    45.546] (II) AIGLX: Loaded and initialized i965
[    45.547] (II) GLX: Initialized DRI2 GL provider for screen 0
[    45.547] (II) Initializing extension XFree86-VidModeExtension
[    45.547] (II) Initializing extension XFree86-DGA
[    45.547] (II) Initializing extension XFree86-DRI
[    45.547] (II) Initializing extension DRI2
[    45.706] (II) modeset(0): Damage tracking initialized
[    45.707] (II) modeset(0): Setting screen physical size to 508 x 285
[    46.111] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    46.111] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.111] (II) LoadModule: "libinput"
[    46.111] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    46.150] (II) Module libinput: vendor="X.Org Foundation"
[    46.150]    compiled for 1.20.4, module version = 0.28.2
[    46.150]    Module class: X.Org XInput Driver
[    46.150]    ABI class: X.Org XInput driver, version 24.1
[    46.150] (II) Using input driver 'libinput' for 'Power Button'
[    46.150] (**) Power Button: always reports core events
[    46.150] (**) Option "Device" "/dev/input/event5"
[    46.150] (**) Option "_source" "server/udev"
[    46.185] (II) event5  - Power Button: is tagged by udev as: Keyboard
[    46.185] (II) event5  - Power Button: device is a keyboard
[    46.185] (II) event5  - Power Button: device removed
[    46.205] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event5"
[    46.205] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    46.205] (**) Option "xkb_model" "pc105"
[    46.205] (**) Option "xkb_layout" "fr"
[    46.205] (**) Option "xkb_variant" "latin9"
[    46.286] (II) event5  - Power Button: is tagged by udev as: Keyboard
[    46.287] (II) event5  - Power Button: device is a keyboard
[    46.288] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    46.288] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    46.288] (II) Using input driver 'libinput' for 'Video Bus'
[    46.288] (**) Video Bus: always reports core events
[    46.288] (**) Option "Device" "/dev/input/event10"
[    46.288] (**) Option "_source" "server/udev"
[    46.290] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[    46.290] (II) event10 - Video Bus: device is a keyboard
[    46.290] (II) event10 - Video Bus: device removed
[    46.325] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event10"
[    46.325] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    46.325] (**) Option "xkb_model" "pc105"
[    46.325] (**) Option "xkb_layout" "fr"
[    46.325] (**) Option "xkb_variant" "latin9"
[    46.327] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[    46.328] (II) event10 - Video Bus: device is a keyboard
[    46.329] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    46.329] (II) No input driver specified, ignoring this device.
[    46.329] (II) This device may have been added with another device file.
[    46.330] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    46.330] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    46.330] (II) Using input driver 'libinput' for 'Sleep Button'
[    46.330] (**) Sleep Button: always reports core events
[    46.330] (**) Option "Device" "/dev/input/event3"
[    46.330] (**) Option "_source" "server/udev"
[    46.331] (II) event3  - Sleep Button: is tagged by udev as: Keyboard
[    46.331] (II) event3  - Sleep Button: device is a keyboard
[    46.331] (II) event3  - Sleep Button: device removed
[    46.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3"
[    46.361] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    46.361] (**) Option "xkb_model" "pc105"
[    46.361] (**) Option "xkb_layout" "fr"
[    46.361] (**) Option "xkb_variant" "latin9"
[    46.363] (II) event3  - Sleep Button: is tagged by udev as: Keyboard
[    46.363] (II) event3  - Sleep Button: device is a keyboard
[    46.366] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[    46.366] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    46.366] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[    46.366] (**) Logitech USB Optical Mouse: always reports core events
[    46.366] (**) Option "Device" "/dev/input/event1"
[    46.366] (**) Option "_source" "server/udev"
[    46.369] (II) event1  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[    46.369] (II) event1  - Logitech USB Optical Mouse: device is a pointer
[    46.369] (II) event1  - Logitech USB Optical Mouse: device removed
[    46.401] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C077.0001/input/input8/event1"
[    46.401] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[    46.402] (**) Option "AccelerationScheme" "none"
[    46.402] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[    46.402] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    46.402] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    46.405] (II) event1  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[    46.405] (II) event1  - Logitech USB Optical Mouse: device is a pointer
[    46.406] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    46.406] (II) No input driver specified, ignoring this device.
[    46.406] (II) This device may have been added with another device file.
[    46.408] (II) config/udev: Adding input device HP HD Camera: HP HD Camera (/dev/input/event18)
[    46.408] (**) HP HD Camera: HP HD Camera: Applying InputClass "libinput keyboard catchall"
[    46.408] (II) Using input driver 'libinput' for 'HP HD Camera: HP HD Camera'
[    46.408] (**) HP HD Camera: HP HD Camera: always reports core events
[    46.408] (**) Option "Device" "/dev/input/event18"
[    46.408] (**) Option "_source" "server/udev"
[    46.410] (II) event18 - HP HD Camera: HP HD Camera: is tagged by udev as: Keyboard
[    46.410] (II) event18 - HP HD Camera: HP HD Camera: device is a keyboard
[    46.410] (II) event18 - HP HD Camera: HP HD Camera: device removed
[    46.449] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input25/event18"
[    46.449] (II) XINPUT: Adding extended input device "HP HD Camera: HP HD Camera" (type: KEYBOARD, id 10)
[    46.449] (**) Option "xkb_model" "pc105"
[    46.449] (**) Option "xkb_layout" "fr"
[    46.449] (**) Option "xkb_variant" "latin9"
[    46.452] (II) event18 - HP HD Camera: HP HD Camera: is tagged by udev as: Keyboard
[    46.452] (II) event18 - HP HD Camera: HP HD Camera: device is a keyboard
[    46.454] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    46.454] (II) No input driver specified, ignoring this device.
[    46.454] (II) This device may have been added with another device file.
[    46.454] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    46.454] (II) No input driver specified, ignoring this device.
[    46.454] (II) This device may have been added with another device file.
[    46.455] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    46.455] (II) No input driver specified, ignoring this device.
[    46.455] (II) This device may have been added with another device file.
[    46.456] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[    46.456] (II) No input driver specified, ignoring this device.
[    46.456] (II) This device may have been added with another device file.
[    46.457] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[    46.457] (II) No input driver specified, ignoring this device.
[    46.457] (II) This device may have been added with another device file.
[    46.458] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event16)
[    46.458] (II) No input driver specified, ignoring this device.
[    46.458] (II) This device may have been added with another device file.
[    46.458] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event17)
[    46.459] (II) No input driver specified, ignoring this device.
[    46.459] (II) This device may have been added with another device file.
[    46.460] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    46.460] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    46.460] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    46.460] (**) AT Translated Set 2 keyboard: always reports core events
[    46.460] (**) Option "Device" "/dev/input/event0"
[    46.460] (**) Option "_source" "server/udev"
[    46.462] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    46.462] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    46.463] (II) event0  - AT Translated Set 2 keyboard: device removed
[    46.477] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    46.477] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    46.477] (**) Option "xkb_model" "pc105"
[    46.477] (**) Option "xkb_layout" "fr"
[    46.477] (**) Option "xkb_variant" "latin9"
[    46.480] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    46.480] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    46.482] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[    46.482] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    46.482] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    46.482] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    46.482] (**) Option "Device" "/dev/input/event2"
[    46.482] (**) Option "_source" "server/udev"
[    46.484] (II) event2  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    46.486] (II) event2  - SynPS/2 Synaptics TouchPad: device is a touchpad
[    46.486] (II) event2  - SynPS/2 Synaptics TouchPad: device removed
[    46.518] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input7/event2"
[    46.518] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    46.519] (**) Option "AccelerationScheme" "none"
[    46.519] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    46.519] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    46.519] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    46.521] (II) event2  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    46.522] (II) event2  - SynPS/2 Synaptics TouchPad: device is a touchpad
[    46.524] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    46.524] (II) No input driver specified, ignoring this device.
[    46.524] (II) This device may have been added with another device file.
[    46.525] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event9)
[    46.525] (II) No input driver specified, ignoring this device.
[    46.525] (II) This device may have been added with another device file.
[    46.526] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    46.526] (II) No input driver specified, ignoring this device.
[    46.526] (II) This device may have been added with another device file.
[    46.526] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    46.527] (II) No input driver specified, ignoring this device.
[    46.527] (II) This device may have been added with another device file.
[    46.528] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event7)
[    46.528] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    46.528] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[    46.528] (**) HP Wireless hotkeys: always reports core events
[    46.528] (**) Option "Device" "/dev/input/event7"
[    46.528] (**) Option "_source" "server/udev"
[    46.529] (II) event7  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[    46.529] (II) event7  - HP Wireless hotkeys: device is a keyboard
[    46.529] (II) event7  - HP Wireless hotkeys: device removed
[    46.565] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event7"
[    46.565] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[    46.565] (**) Option "xkb_model" "pc105"
[    46.565] (**) Option "xkb_layout" "fr"
[    46.565] (**) Option "xkb_variant" "latin9"
[    46.567] (II) event7  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[    46.567] (II) event7  - HP Wireless hotkeys: device is a keyboard
[    46.568] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[    46.568] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    46.568] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    46.568] (**) HP WMI hotkeys: always reports core events
[    46.568] (**) Option "Device" "/dev/input/event8"
[    46.568] (**) Option "_source" "server/udev"
[    46.569] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    46.569] (II) event8  - HP WMI hotkeys: device is a keyboard
[    46.570] (II) event8  - HP WMI hotkeys: device removed
[    46.605] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event8"
[    46.605] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[    46.605] (**) Option "xkb_model" "pc105"
[    46.605] (**) Option "xkb_layout" "fr"
[    46.605] (**) Option "xkb_variant" "latin9"
[    46.607] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    46.607] (II) event8  - HP WMI hotkeys: device is a keyboard
[    46.691] (EE) Failed to open authorization file "/var/run/sddm/{826e562c-28d2-4a8f-a1cb-ecaf2376b320}": No such file or directory
[    73.124] (II) modeset(0): EDID vendor "CMN", prod id 5944
[    73.124] (II) modeset(0): Printing DDC gathered Modelines:
[    73.125] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1968 2000 2250  1080 1083 1088 1132 +hsync -vsync (67.9 kHz eP)
[    73.125] (II) modeset(0): Modeline "1920x1080"x0.0  101.89  1920 1968 2000 2250  1080 1083 1088 1132 +hsync -vsync (45.3 kHz e)
[    78.069] (II) modeset(0): EDID vendor "CMN", prod id 5944
[    78.069] (II) modeset(0): Printing DDC gathered Modelines:
[    78.069] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1968 2000 2250  1080 1083 1088 1132 +hsync -vsync (67.9 kHz eP)
[    78.069] (II) modeset(0): Modeline "1920x1080"x0.0  101.89  1920 1968 2000 2250  1080 1083 1088 1132 +hsync -vsync (45.3 kHz e)
 

Hors ligne

#31 01-10-2020 08:04:55

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

journalctl --pager -r -p err


-- Logs begin at Thu 2020-10-01 08:05:04 CEST, end at Thu 2020-10-01 09:03:20 CEST. --
oct. 01 08:05:06 hp-probook kernel: pstore: crypto_comp_decompress failed, ret = -22!
 

Hors ligne

#32 01-10-2020 08:07:22

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

systemd-analyze blame


         12.297s NetworkManager-wait-online.service
          8.231s ModemManager.service
          7.551s udisks2.service
          5.443s apache2.service
          5.385s dev-sda2.device
          5.274s accounts-daemon.service
          4.674s lm-sensors.service
          3.999s avahi-daemon.service
          3.952s minidlna.service
          3.928s bluetooth.service
          3.916s systemd-logind.service
          3.910s iio-sensor-proxy.service
          3.888s nmbd.service
          3.879s wpa_supplicant.service
          3.879s NetworkManager.service
          3.876s switcheroo-control.service
          3.864s pppd-dns.service
          3.864s rsyslog.service
          3.861s vboxdrv.service
          3.830s networking.service
          1.994s smbd.service
          1.909s ssh.service
          1.903s colord.service
          1.159s systemd-fsck@dev-disk-by\x2duuid-6956b2ec\x2df80d\x2d46d7\x2d82c1\x2d1dff8bbdbb45.service
          1.157s polkit.service
           958ms apparmor.service
           934ms systemd-fsck@dev-disk-by\x2duuid-911E\x2d4DFE.service
           916ms systemd-udevd.service
           836ms keyboard-setup.service
           806ms plymouth-start.service
           770ms systemd-modules-load.service
           687ms upower.service
           472ms systemd-remount-fs.service
           420ms plymouth-quit-wait.service
           420ms plymouth-quit.service
           414ms sys-kernel-debug.mount
           410ms dev-hugepages.mount
           382ms systemd-timesyncd.service
           373ms dev-mqueue.mount
           371ms hddtemp.service
           363ms systemd-sysusers.service
           359ms tlp.service
           338ms sddm.service
           308ms systemd-journald.service
           255ms rtkit-daemon.service
           234ms systemd-tmpfiles-setup-dev.service
           231ms systemd-tmpfiles-setup.service
           226ms vboxautostart-service.service
           225ms systemd-user-sessions.service
           218ms boot-efi.mount
           198ms systemd-udev-trigger.service
           177ms ifupdown-pre.service
           121ms vboxballoonctrl-service.service
           118ms systemd-sysctl.service
           112ms systemd-journal-flush.service
           110ms home.mount
           107ms systemd-tmpfiles-clean.service
            96ms systemd-update-utmp.service
            95ms dev-disk-by\x2duuid-c75323ba\x2d5177\x2d4ee7\x2db2ed\x2d63bae4dae7dd.swap
            92ms user@1000.service
            87ms vboxweb-service.service
            72ms systemd-backlight@backlight:intel_backlight.service
            64ms alsa-restore.service
            62ms systemd-random-seed.service
            53ms plymouth-read-write.service
            37ms console-setup.service
            35ms kmod-static-nodes.service
            25ms systemd-update-utmp-runlevel.service
            18ms user-runtime-dir@1000.service
             5ms sys-fs-fuse-connections.mount
 

Hors ligne

#33 01-10-2020 11:09:15

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour
c'est le #30 le plus récent je vois commencer par celui la
ps:  a priori tu utilise plusieurs bureaux , celui du 30/09/20  correspond a gnome par exemple [en #29) , celui du 01/10/20 (en #30) comme mate ou xfce

a priori les deux cartes fonctionnent bien intel et nvidia sur le #30

sur le #29 trouvé ceci


[   107.727] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
 



sur le #30


[    41.596] (II) modeset(0): EDID for output HDMI-1
[    41.596] (II) modeset(0): EDID for output DP-1
[    41.600] (II) modeset(0): EDID for output HDMI-2
[    41.600] (II) modeset(0): Output eDP-1 connected
[    41.600] (II) modeset(0): Output HDMI-1 disconnected
[    41.600] (II) modeset(0): Output DP-1 disconnected
[    41.600] (II) modeset(0): Output HDMI-2 disconnected
[    41.600] (II) modeset(0): Using exact sizes for initial modes
[    41.600] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[    41.600] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    41.600] (==) modeset(0): DPI set to (96, 96)
 




[    45.707] (II) modeset(0): Setting screen physical size to 508 x 285
 



deux cartes graphiques et un écran , qui est connecté sur  DP-1 ?

mon #27 ça vaut vraiment le coup de désactiver une carte graphique (au hasard amd radeon )

je me trompe peut être mais a mon avis sur l'invite de connexion tu est sous intel avec l'affichage
ça coince au chargement du bureau ou le système fait n'importe quoi
en tout cas ton système est propre (pas un souci de driver video , juste deux cartes => un écran (sur le #30 , le #29 est moins bien )
X peut gérer deux cartes mais sur un pc de bureau par exemple en libre (hier j'ai testé sur une CM "MSI" une GTX660 + écran  et une GTX250 sans écran avec "nouveau" ça tourne nickel )
sur le portable c'est une ou l'autre , physiquement la machine n'est pas configurer pour activer les deux (matériel)
il y a des gens sur le forum qui connaisent le couple "intel + amd" sur portable et comment switch de l'une sur l'autre (serveur X ou Wayland )
comme tu est en modeset (modesetting du noyau ou KMS ) pour les deux gpu , c'est parfait pour fonctionner correctement

nota: sur ton #29 tu utilise "modeset" pour intel  et "amdgpu" pour la radeon (le driver est "radeon" pour une R7 )
ma R9 270X utilise le driver "radeon" vérifier sur une machine , c'est étrange ,  =>   https://www.techpowerup.com/gpu-specs/r … m340.c2687

Dernière modification par robert2a (01-10-2020 12:00:27)

Hors ligne

#34 05-10-2020 09:05:57

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour robert2a,

je suis étonné que le constructeur ait mis 2 cartes graphiques dans un ordinateur portable plutôt dédié à une utilisation bureautique.
Je suis allé voir sur le site de HP : https://support.hp.com/fr-fr/document/c04845559
Le constructeur ne mentionne pas qu'il y a 2 cartes : il ne parle que de la carte Intel intégrée. En tout cas, aucun mot sur une éventuelle carte radeon !

Du coup, je suis un peu perdu : pourquoi il apparaît 2 cartes dans le log de Xorg.0 si physiquement il n'y en a qu'une ??? scratchhead.gif

Je suis aussi allé fouiller dans les fichiers de config de Grub ( /etc/grub.d et /etc/default/grub ) et je n'ai rien trouvé concernant la carte graphique...

Hors ligne

#35 05-10-2020 09:27:28

jpt
Membre
Distrib. : Debian 10.6
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour,

golestin a écrit :

Du coup, je suis un peu perdu : pourquoi il apparaît 2 cartes dans le log de Xorg.0 si physiquement il n'y en a qu'une ??? https://debian-facile.org/img/smilies/x … chhead.gif

2 GPU ça ne veut pas dire 2 cartes -- oui, je me suis gourré il y a qq jours quand j'ai écrit

jpt a écrit :

Ce n'est peut-être pas impossible

en réponse (logs à l'appui) à une question de robert2a qui s'interrogeait sur la possible présence de deux cartes.

Et c'est vrai que sur certains de ses posts il parle de deux cartes et sur d'autres de deux GPU.

De + en + compliquée, l'informatique, de nos jours...

Dernière modification par jpt (05-10-2020 09:28:00)


Ryzen3 3200G - Gigabyte B450M & Make Love Not War

Hors ligne

#36 05-10-2020 09:47:17

Debian Alain
Adhérent(e)
Lieu : Bretagne
Distrib. : stable / testing
Noyau : Linux 5.9.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

les portables étant devenus des chefs d'oeuvre d'intégration et de miniaturisation ,

on parle souvent , par  abus de language , de carte réseau , carte wifi , carte graphique , etc ...

en fait , on fait une analogie avec les pc  "tour" où les cartes graphiques , son , et réseau étaient à l'origine bien visibles .

et montées à la main .

depuis longtemps ce n'est plus le cas , beaucoup de composants ont été intégrés (mme les cartes graphiques) .

mais l'usage est resté .

donc distinguer une "carte graphique" d'un  GPU , revient  souvent  au mme .

ce sont deux façons de s'exprimer totalement identiques .

Hors ligne

#37 09-10-2020 15:44:18

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Debian Alain a écrit :

les portables étant devenus des chefs d'oeuvre d'intégration et de miniaturisation ,

donc distinguer une "carte graphique" d'un  GPU , revient  souvent  au mme .

ce sont deux façons de s'exprimer totalement identiques .



D'accord, ça j'ai bien compris smile
Mais si le constructeur ne mentionne qu'un seul GPU, pourquoi Debian en voit-il deux, c'est là ma vraie question ! Problème lors de l'installation ?? Le système croit qu'il y a plusieurs GPU car il y a plusieurs processeurs intégrant chacun une carte graphique ?? scratchhead.gif Le constructeur précise pourtant qu'il n'y a qu'une carte graphique Intel...

Hors ligne

#38 09-10-2020 16:03:36

Debian Alain
Adhérent(e)
Lieu : Bretagne
Distrib. : stable / testing
Noyau : Linux 5.9.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

bonjour golestin  smile  smile  smile

on n' a pas  pensé te demander çà dès le départ .

tu peux installer inxi ?

apt install inxi



et nous poster les retours suivants ?

dmesg | grep DMI:


inxi -Fr

Hors ligne

#39 10-10-2020 09:43:27

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Debian Alain a écrit :



tu peux installer inxi ?



inxi déjà installé big_smile

dmesg | grep DMI:


[    0.000000] DMI: HP HP ProBook 470 G3/8102, BIOS N78 Ver. 01.19 10/17/2017


et :

inxi -Fr


System:    Host: hp-probook Kernel: 4.19.0-6-amd64 x86_64 bits: 64 Console: tty 1 Distro: Debian GNU/Linux 10 (buster)
Machine:   Type: Laptop System: HP product: HP ProBook 470 G3 v: N/A serial: 5CD6258S96
           Mobo: HP model: 8102 v: KBC Version 40.71 serial: PFMLB038J300TA UEFI: HP v: N78 Ver. 01.19 date: 10/17/2017
Battery:   ID-1: BAT0 charge: 41.4 Wh condition: 41.4/41.4 Wh (100%)
CPU:       Topology: Dual Core model: Intel Core i3-6100U bits: 64 type: MT MCP L2 cache: 3072 KiB
           Speed: 797 MHz min/max: 400/2300 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800
Graphics:  Device-1: Intel HD Graphics 520 driver: i915 v: kernel
           Device-2: AMD Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] driver: amdgpu v: kernel
           Display: server: X.org 1.20.4 driver: amdgpu,modesetting FAILED: ati unloaded: fbdev,vesa tty: 271x68
           Message: Advanced graphics data unavailable in console for root.
Audio:     Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel
           Sound Server: ALSA v: k4.19.0-6-amd64
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
           IF: enp2s0 state: down mac: ec:8e:b5:42:78:dc
           Device-2: Intel Wireless 3165 driver: iwlwifi
           IF: wlp3s0 state: up mac: b8:81:98:4b:06:6d
Drives:    Local Storage: total: 931.51 GiB used: 414.82 GiB (44.5%)
           ID-1: /dev/sda vendor: Toshiba model: MQ01ABD100 size: 931.51 GiB
Partition: ID-1: / size: 27.38 GiB used: 16.50 GiB (60.3%) fs: ext4 dev: /dev/sda2
           ID-2: /home size: 880.12 GiB used: 398.32 GiB (45.3%) fs: ext4 dev: /dev/sda4
           ID-3: swap-1 size: 7.90 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3
Sensors:   System Temperatures: cpu: 51.0 C mobo: 41.0 C gpu: amdgpu temp: 511 C
           Fan Speeds (RPM): N/A
Repos:     Active apt repos in: /etc/apt/sources.list
           1: deb http://deb.debian.org/debian/ buster main contrib non-free
           2: deb-src http://deb.debian.org/debian/ buster main contrib non-free
           3: deb http://security.debian.org/debian-security buster/updates main contrib non-free
           4: deb-src http://security.debian.org/debian-security buster/updates main contrib non-free
           5: deb http://deb.debian.org/debian/ buster-updates main contrib non-free
           6: deb-src http://deb.debian.org/debian/ buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/dropbox.list
           1: deb [arch=i386,amd64] http://linux.dropbox.com/debian buster main
           No active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list
           1: deb [arch=amd64] https://repo.skype.com/deb stable main
Info:      Processes: 221 Uptime: 45m Memory: 7.66 GiB used: 1.83 GiB (23.9%) Init: systemd runlevel: 5 Shell: bash
           inxi: 3.0.32
 



OK c'est bon je commencer à piger ...

Graphics:  Device-1: Intel HD Graphics 520 driver: i915 v: kernel
           Device-2: AMD Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] driver: amdgpu v: kernel
           Display: server: X.org 1.20.4 driver: amdgpu,modesetting FAILED: ati unloaded: fbdev,vesa tty: 271x68


il y aurait donc bien 2 cartes graphiques !!!
Mais je ne suis pas sûr de comprendre la dernière ligne : amdgpu ne se chargerait pas normalement, d'où le conflit entre les deux cartes ???

En tous les cas, robert2a et jpt étaient sur la bonne voie ... respect wink

Dernière modification par golestin (10-10-2020 09:50:01)

Hors ligne

#40 12-10-2020 08:24:10

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

robert2a a écrit :

Bonjour
comme il faut bien commencer par quelque chose on désactive amd
sur grub "radeon.modeset=0"
on le blacklist  "blacklist radeon"



Voilà, j'ai modifié /etc/default/grub comme ci-dessus, et quand je fais :

update-grub


/usr/sbin/grub-mkconfig: 11: /etc/default/grub: radeon.modeset=0: not found
 


voilà l'erreur que j'obtiens !

Hors ligne

#41 12-10-2020 09:25:43

Debian Alain
Adhérent(e)
Lieu : Bretagne
Distrib. : stable / testing
Noyau : Linux 5.9.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

bonjour golestin  big_smile  big_smile  big_smile

tu peux nous donner le contenu de  ton /etc/default/grub ?

cat /etc/default/grub

Hors ligne

#42 12-10-2020 09:50:52

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

pas de problème big_smile :

cat /etc/default/grub


# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT="0"
GRUB_TIMEOUT="15"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
 



Bien sûr c'est "l'ancien grub", après avoir retiré ce que robert2a préconisait !

Hors ligne

#43 12-10-2020 09:56:04

Debian Alain
Adhérent(e)
Lieu : Bretagne
Distrib. : stable / testing
Noyau : Linux 5.9.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandon] plantage total au démarrage serveur graphique

robert2a est souvent très avisé . largement plus que moi .

tu as pensé à ceci : ?

GRUB_CMDLINE_LINUX_DEFAULT="quiet radeon.modeset=0"



nano /etc/modprobe.d/radeon.conf

blacklist radeon



puis reboot ?

Dernière modification par Debian Alain (12-10-2020 11:01:52)

Hors ligne

#44 12-10-2020 15:54:29

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

je viens de faire... toujours plantage au même moment sad

Hors ligne

#45 12-10-2020 15:55:42

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

je viens de faire... toujours plantage au même moment sad

Hors ligne

#46 12-10-2020 18:13:14

jpt
Membre
Distrib. : Debian 10.6
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : [abandon] plantage total au démarrage serveur graphique

C'est curieux, ton histoire :
le 28 septembre tu nous remontes ça :

golestin a écrit :

Salut jpt et Debian Alain et robert2a !

Suivant vos conseils, voilà ce que j'obtiens en démarrant avec le noyau 4.19.0-6-amd64 sous KDE.

cat /var/log/Xorg.0.log | grep EE


[   305.670] (EE) systemd-logind: failed to get session: PID 816 does not belong to any known session


et le 1er octobre post n° 30 il y a ça, presque tout en bas du log :

golestin a écrit :

cat /var/log/Xorg.0.log


[    46.691] (EE) Failed to open authorization file "/var/run/sddm/{826e562c-28d2-4a8f-a1cb-ecaf2376b320}": No such file or directory



Comment se fait-il qu'on n'ait pas les mêmes erreurs ? Je me demande si on ne fait pas fausse route en cherchant dans X, tu parlais de plantage total, as-tu tenté quand c'est planté d'avoir une console en faisant Ctrl-Alt-Fx avec x de 1 à 6 ? Et la touche "Verr Num" du clavier numérique, elle bascule ou pas ?

De plus, l'erreur du 28/09 ne doit pas en être une puisque tu nous dis dans ton premier post

golestin a écrit :

Si je démarre sur le noyau 4.19.0-6-amd64, pas de problème, tout fonctionne normalement.




Malheureusement, avec mes soucis, je n'ai pas trop le temps de creuser plus.

Dernière modification par jpt (12-10-2020 18:22:55)


Ryzen3 3200G - Gigabyte B450M & Make Love Not War

Hors ligne

#47 12-10-2020 21:27:03

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Bonsoir jpt

jpt a écrit :

C'est curieux, ton histoire :
...

Comment se fait-il qu'on n'ait pas les mêmes erreurs ? Je me demande si on ne fait pas fausse route en cherchant dans X, tu parlais de plantage total, as-tu tenté quand c'est planté d'avoir une console en faisant Ctrl-Alt-Fx avec x de 1 à 6 ? Et la touche "Verr Num" du clavier numérique, elle bascule ou pas ?

De plus, l'erreur du 28/09 ne doit pas en être une puisque tu nous dis dans ton premier post

golestin a écrit :

Si je démarre sur le noyau 4.19.0-6-amd64, pas de problème, tout fonctionne normalement.



oui, je suis bien d'accord avec toi, c'est un peu déroutant.
Je te confirme que, juste après l'authentification, ma bécane se plante totalement : souris, clavier totalement gelés. Plus aucune touche active, je n'ai pas d'autre choix de forcer l'arrêt en appuyant 5 secondes sur le bouton d'alimentation. (J'ai même une fois attendu au moins 15 minutes en me disant que, peut-être un process était en cours et qu'il finirait bien par s'interrompre wink , mais non !)

Hors ligne

#48 12-10-2020 22:44:40

jpt
Membre
Distrib. : Debian 10.6
Noyau : Linux 5.7.10 (backports)
(G)UI : LXDE
Inscription : 12-09-2020

Re : [abandon] plantage total au démarrage serveur graphique

golestin a écrit :

Si je démarre sur le noyau 4.19.0-6-amd64, pas de problème, tout fonctionne normalement.

Ce sont tous les autres noyaux qui mettent la pagaille ?

Et ils sortent d'où, ces autres noyaux ? Compilation des sources ou apt-get install ?


Ryzen3 3200G - Gigabyte B450M & Make Love Not War

Hors ligne

#49 13-10-2020 14:39:15

golestin
Adhérent(e)
Distrib. : Debian Buster 10.5
Noyau : Linux 4.19.0-6-amd64
(G)UI : KDE Plasma 5.14.5
Inscription : 10-10-2016

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour jpt smile
Je ne sais pas si ce sont les autres noyaux qui mettent la pagaille.
Tous ces autres noyaux proviennent des mises à jour automatiques faites par Discover.
Sous les précédentes version de Debian, j'avais les mêmes options de mises à jour, les mêmes logiciels installés, le même ordi, et les mises à jour du noyau fonctionnaient très bien. C'est depuis Buster que le problème est apparu et seulement à partir du noyau 4.19.0-8.

Hors ligne

#50 14-10-2020 10:20:43

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandon] plantage total au démarrage serveur graphique

Bonjour
tu a deux gpu (ton retour de Xorg.0.log) de ton #30 et le retour de ton lspci


[    38.719] (II) xfree86: Adding drm device (/dev/dri/card0)
[    38.724] (II) xfree86: Adding drm device (/dev/dri/card1)
[    38.731] (--) PCI:*(0@0:2:0) 8086:1916:103c:8102 rev 7, Mem @ 0xe1000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    38.731] (--) PCI: (1@0:0:0) 1002:6900:103c:811c rev 131, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xe2000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
 



le noyau actuel de buster


4.19.0-11-amd64 #1 SMP Debian 4.19.146-1 (2020-09-17) x86_64 GNU/Linux
 



sinon pas d'idées pour ton souci

Hors ligne

Pied de page des forums