Debian Debian-France Debian-Facile Debian-fr.org Debian-fr.xyz Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 02-11-2020 14:07:18

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

J'ai mis à jour le sources.list que tu m'avais donné.
résultat:

root@pommard:/home/thomas# apt update
Réception de :1 http://deb.debian.org/debian-security bullseye-security/updates InRelease [44,1 kB]
Réception de :2 http://deb.debian.org/debian bullseye-updates InRelease [38,8 kB]
Atteint :3 http://deb.debian.org/debian bullseye InRelease
Réception de :4 http://deb.debian.org/debian bullseye/contrib amd64 Packages [48,6 kB]
Réception de :5 http://deb.debian.org/debian bullseye/contrib Translation-en [44,8 kB]
Réception de :6 http://deb.debian.org/debian bullseye/non-free amd64 Packages [95,2 kB]
Réception de :7 http://deb.debian.org/debian bullseye/non-free Translation-en [90,4 kB]
362 ko réceptionnés en 1s (321 ko/s)                                    
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
root@pommard:/home/thomas# apt-get --reinstall install firmware-misc-nonfree firmware-iwlwifi intel-microcode firmware-realteck
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet firmware-realteck
 

Hors ligne

#27 02-11-2020 14:09:58

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

fait un copier/coller dans la console , realtek tu a fait une erreur => "realteck"

un copier/coller de ma commande => apt-get --reinstall install firmware-misc-nonfree firmware-iwlwifi intel-microcode firmware-realtek

pour le sources.list j'ai fait une erreur , enfin j'appris cela hier
pour la ligne  du dépôt "security"

j'ai modifier mon #15 et le #21 est correct
la ligne a modifier


deb http://security.debian.org/debian-security bullseye-security/updates main contrib non-free
 


autant faire les choses correctement
toi le ligne doit être comme ceci


deb http://deb.debian.org/debian-security bullseye-security/updates main contrib non-free
 


alors quelle doit commencer par "deb http://security.debian.org"
les deux autres ne change pas

ps: les firmwares tu a réussi a les installer ?

Dernière modification par robert2a (02-11-2020 14:51:25)

Hors ligne

#28 02-11-2020 17:10:58

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

Robert,
voici le résultat:

remove plymouth:

root@pommard:/home/thomas# apt-get remove --purge plymouth* libplymouth4
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Note : sélection de plymouth-themes pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-theme pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-label pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-script pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-spinfinity pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-solar pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-dev pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-drm pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-all pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-glow pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-theme-hamara pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-fade-in pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-spinner pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-theme-breeze pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-x11 pour l'expression rationnelle « plymouth* »
Le paquet « plymouth-dev » n'est pas installé, et ne peut donc être supprimé
Le paquet « plymouth-drm » n'est pas installé, et ne peut donc être supprimé
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-all »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-fade-in »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-glow »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-script »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-solar »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-spinfinity »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-spinner »
Le paquet « plymouth-theme-breeze » n'est pas installé, et ne peut donc être supprimé
Le paquet « plymouth-themes » n'est pas installé, et ne peut donc être supprimé
Le paquet « plymouth-x11 » n'est pas installé, et ne peut donc être supprimé
Le paquet « plymouth-theme-hamara » n'est pas installé, et ne peut donc être supprimé
Les paquets suivants seront ENLEVÉS :
  libplymouth4* plymouth* plymouth-label*
0 mis à jour, 0 nouvellement installés, 3 à enlever et 0 non mis à jour.
Après cette opération, 862 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 106964 fichiers et répertoires déjà installés.)
Suppression de plymouth-label (0.9.4-3) ...
Suppression de plymouth (0.9.4-3) ...
update-initramfs: deferring update (trigger activated)
Suppression de libplymouth4:amd64 (0.9.4-3) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-4) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.3-2) ...
Traitement des actions différées (« triggers ») pour initramfs-tools (0.139) ...
update-initramfs: Generating /boot/initrd.img-5.9.0-1-amd64
(Lecture de la base de données... 106872 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de plymouth (0.9.4-3) ...
Traitement des actions différées (« triggers ») pour systemd (246.6-2) ...
 



lusb:

Bus 002 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 002: ID 1d5c:5002 Fresco Logic USB3.0 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 13d3:56d3 IMC Networks USB2.0 HD UVC WebCam
Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 001 Device 006: ID 2000:dd00 CMX Systems
Bus 001 Device 005: ID 1a40:0801 Terminus Technology Inc.
Bus 001 Device 004: ID 1d5c:5012 Fresco Logic USB2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 



cat /etc/apt/sources.list :

#

# deb cdrom:[Debian GNU/Linux testing _Bullseye_ - Official Snapshot amd64 NETINST 20201026-03:36]/ bullseye main

#deb cdrom:[Debian GNU/Linux testing _Bullseye_ - Official Snapshot amd64 NETINST 20201026-03:36]/ bullseye main

#deb http://deb.debian.org/debian/ bullseye main
#deb-src http://deb.debian.org/debian/ bullseye main

deb http://deb.debian.org/debian-security bullseye-security/updates main contrib non-free
deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
deb http://deb.debian.org/debian/ bullseye main contrib non-free

#deb http://security.debian.org/debian-security bullseye-security main
#deb-src http://security.debian.org/debian-security bullseye-security main

# This system was installed using small removable media
# (e.g. netinst, live or single CD). The matching "deb cdrom"
# entries were disabled at the end of the installation process.
# For information about how to configure apt package sources,
# see the sources.list(5) manual.
 


journalctl:

root@pommard:/home/thomas# journalctl -r -p err
-- Logs begin at Mon 2020-11-02 11:02:15 CET, end at Mon 2020-11-02 16:06:10>
nov. 02 16:06:10 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:06:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:06:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:53 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:40 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:27 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:23 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:10 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:40 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:27 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:54 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:24 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:54 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:41 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:32 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:28 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:24 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:20 pommard kernel: r8152 2-1.1:1.0: firmware: failed to load r>
nov. 02 15:50:19 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:15 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:15 pommard kernel: hdaudio hdaudioC0D2: Unable to bind the cod>
nov. 02 15:50:11 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:49:24 pommard lightdm[723]: gkr-pam: unable to locate daemon cont>
nov. 02 15:49:13 pommard bluetoothd[572]: sap-server: Operation not permitte>
nov. 02 15:49:13 pommard bluetoothd[572]: profiles/sap/server.c:sap_server_r>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: check git://git.kerne>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: maximum version suppo>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: minimum version requi>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: firmware_class: See https://wiki.debian.org>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
-- Reboot --
nov. 02 15:48:47 pommard kernel: Bluetooth: hci0: setting interface failed (>
nov. 02 15:48:35 pommard bluetoothd[554]: Failed to set privacy: Rejected (0>
nov. 02 15:48:35 pommard bluetoothd[554]: sap-server: Operation not permitte>
nov. 02 15:48:35 pommard bluetoothd[554]: profiles/sap/server.c:sap_server_r>
nov. 02 15:48:34 pommard kernel: Bluetooth: hci0: Retrieving Intel exception>
nov. 02 15:48:34 pommard kernel: Bluetooth: hci0: Hardware error 0x0a
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: check git://git.kerne>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: maximum version suppo>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: minimum version requi>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:48:34 pommard kernel: firmware_class: See https://wiki.debian.org>
nov. 02 15:48:34 pommard kernel: i915 0000:00:02.0: firmware: failed to load>
-- Reboot --
 


et j'ai fait un reinstall des paquets dont realtek (bien orthographié big_smile)
je fais refaire un reboot avec le dock débranché, avec nomodeset=1

MAJ 17h14
reboot fait.
Si je boote sans nomodeset=1, j'ai un écran noir donc pas le GUI de login Xfce
J'ai donc fait un boot avec nomodeset=1 et le dock débranché, j'arrive à me connecter.
Le changement, la carte Wifi fonctionne.
J'ai pu me connecter à mon réseau Wifi.
Si je branche le dock, le réseau filaire est détectée comme avant.

ça change la vie d'avoir un GUI pour poster les logs dans le forum. Car avant je devais faire des photos de l'écran avec mon smartphone.

la carte audio fonctionne. J'ai le son de mon portable! youpi.
par contre si je branche une enceinte sur mon dock, le son ne sort pas par l'enceinte mais uniquement par les haut-parleurs de mon portable.

Dernière modification par NormandiePi (02-11-2020 17:24:49)

Hors ligne

#29 02-11-2020 20:15:08

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

pour le souces.list je le remet de nouveau


#mise a jour de sécurité
deb http://security.debian.org/debian-security bullseye-security main contrib non-free
#mise a jour des paquets
deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
#dépot de base de debian
deb http://deb.debian.org/debian/ bullseye main contrib non-free
 


le reste ne sert plus a rien

pour journalctl je t'ai dit de supprimer le dossier journal
tu aura comme retour que celui du dernier démarrage et plus le séparateur "reboot" , tu passera de "persistent" a "volatile"
ce qui te donnerai cela


-- Logs begin at Mon 2020-11-02 11:02:15 CET, end at Mon 2020-11-02 16:06:10>
nov. 02 16:06:10 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:06:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:06:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:53 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:40 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:27 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:23 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:10 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:40 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:27 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: check git://git.kerne>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: maximum version suppo>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: minimum version requi>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: firmware_class: See https://wiki.debian.org>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 16:01:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:54 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:24 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:54 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:41 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:32 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:28 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:24 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:20 pommard kernel: r8152 2-1.1:1.0: firmware: failed to load r>
nov. 02 15:50:19 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:15 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:15 pommard kernel: hdaudio hdaudioC0D2: Unable to bind the cod>
nov. 02 15:50:11 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:49:24 pommard lightdm[723]: gkr-pam: unable to locate daemon cont>
nov. 02 15:49:13 pommard bluetoothd[572]: sap-server: Operation not permitte>
nov. 02 15:49:13 pommard bluetoothd[572]: profiles/sap/server.c:sap_server_r>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: check git://git.kerne>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: maximum version suppo>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: minimum version requi>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: firmware_class: See https://wiki.debian.org>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
 



il manque la fin des lignes c'est plutôt génant

pour ce que tu explique pour le démarrage , nomodeset=1 je ne t'ai pas dit de l'enlever pour l'instant
par contre le dock ce serait bien de savoir comment le faire fonctionner correctement
pour le wifi normal tu a le firmware, bien que je vois quelque chose mais il manque la fin des lignes


nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: check git://git.kerne>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: maximum version suppo>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: minimum version requi>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: firmware_class: See https://wiki.debian.org>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
 


c'est pas gagné encore a priori ça demande des paquets encore plus récent et peut être un noyau (pour le dock par exemple )

il faudrait de la matière grise mais ça ne ce bouscule pas au portillon sur le forum  roll

Dernière modification par robert2a (02-11-2020 20:30:44)

Hors ligne

#30 03-11-2020 00:06:31

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

voici les logs de Xorg:


[     4.200]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     4.200] Build Operating System: Linux 4.19.0-8-amd64 x86_64 Debian
[     4.200] Current Operating System: Linux pommard 5.9.0-1-amd64 #1 SMP Debian 5.9.1-1 (2020-10-17) x86_64
[     4.200] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64 root=UUID=d81f20a8-e73c-4594-9ca6-745480ea954d ro nomodeset=1 quiet
[     4.201] Build Date: 31 March 2020  10:14:40AM
[     4.201] xorg-server 2:1.20.8-2 (https://www.debian.org/support)
[     4.201] Current version of pixman: 0.36.0
[     4.201]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     4.201] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.201] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  2 22:40:59 2020
[     4.202] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.203] (==) No Layout section.  Using the first Screen section.
[     4.203] (==) No screen section available. Using defaults.
[     4.203] (**) |-->Screen "Default Screen Section" (0)
[     4.203] (**) |   |-->Monitor "<default monitor>"
[     4.204] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     4.204] (==) Automatically adding devices
[     4.204] (==) Automatically enabling devices
[     4.204] (==) Automatically adding GPU devices
[     4.204] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     4.206] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     4.207]  Entry deleted from font path.
[     4.208] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     4.208] (==) ModulePath set to "/usr/lib/xorg/modules"
[     4.208] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.208] (II) Loader magic: 0x5608c85f1e20
[     4.208] (II) Module ABI versions:
[     4.208]  X.Org ANSI C Emulation: 0.4
[     4.208]  X.Org Video Driver: 24.1
[     4.208]  X.Org XInput driver : 24.1
[     4.208]  X.Org Server Extension : 10.0
[     4.210] (++) using VT number 7

[     4.210] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     4.215] (--) PCI:*(0@0:2:0) 8086:3ea0:1043:17d1 rev 0, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[     4.215] (II) LoadModule: "glx"
[     4.216] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.223] (II) Module glx: vendor="X.Org Foundation"
[     4.223]  compiled for 1.20.8, module version = 1.0.0
[     4.223]  ABI class: X.Org Server Extension, version 10.0
[     4.223] (==) Matched modesetting as autoconfigured driver 0
[     4.223] (==) Matched fbdev as autoconfigured driver 1
[     4.223] (==) Matched vesa as autoconfigured driver 2
[     4.223] (==) Assigned the driver to the xf86ConfigLayout
[     4.223] (II) LoadModule: "modesetting"
[     4.223] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.224] (II) Module modesetting: vendor="X.Org Foundation"
[     4.224]  compiled for 1.20.8, module version = 1.20.8
[     4.224]  Module class: X.Org Video Driver
[     4.224]  ABI class: X.Org Video Driver, version 24.1
[     4.224] (II) LoadModule: "fbdev"
[     4.224] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.225] (II) Module fbdev: vendor="X.Org Foundation"
[     4.225]  compiled for 1.20.0, module version = 0.5.0
[     4.225]  Module class: X.Org Video Driver
[     4.225]  ABI class: X.Org Video Driver, version 24.0
[     4.225] (II) LoadModule: "vesa"
[     4.225] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.225] (II) Module vesa: vendor="X.Org Foundation"
[     4.225]  compiled for 1.20.9, module version = 2.5.0
[     4.225]  Module class: X.Org Video Driver
[     4.225]  ABI class: X.Org Video Driver, version 24.1
[     4.226] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.226] (II) FBDEV: driver for framebuffer: fbdev
[     4.226] (II) VESA: driver for VESA chipsets: vesa
[     4.230] (EE) open /dev/dri/card0: No such file or directory
[     4.230] (WW) Falling back to old probe method for modesetting
[     4.230] (EE) open /dev/dri/card0: No such file or directory
[     4.230] (II) Loading sub module "fbdevhw"
[     4.230] (II) LoadModule: "fbdevhw"
[     4.231] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.231] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.231]  compiled for 1.20.8, module version = 0.0.2
[     4.231]  ABI class: X.Org Video Driver, version 24.1
[     4.231] (EE) Unable to find a valid framebuffer device
[     4.231] (WW) Falling back to old probe method for fbdev
[     4.231] (II) Loading sub module "fbdevhw"
[     4.231] (II) LoadModule: "fbdevhw"
[     4.232] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.232] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.232]  compiled for 1.20.8, module version = 0.0.2
[     4.232]  ABI class: X.Org Video Driver, version 24.1
[     4.232] (II) FBDEV(2): using default device
[     4.232] vesa: Refusing to run on UEFI
[     4.232] (EE) Screen 0 deleted because of no matching config section.
[     4.232] (II) UnloadModule: "modesetting"
[     4.232] (EE) Screen 0 deleted because of no matching config section.
[     4.232] (II) UnloadModule: "fbdev"
[     4.232] (II) UnloadSubModule: "fbdevhw"
[     4.232] (II) FBDEV(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     4.232] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     4.232] (==) FBDEV(0): RGB weight 888
[     4.232] (==) FBDEV(0): Default visual is TrueColor
[     4.232] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.232] (II) FBDEV(0): hardware: EFI VGA (video memory: 1920kB)
[     4.232] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[     4.232] (II) FBDEV(0): checking modes against framebuffer device...
[     4.232] (II) FBDEV(0): checking modes against monitor...
[     4.232] (II) FBDEV(0): Virtual size is 800x600 (pitch 800)
[     4.232] (**) FBDEV(0):  Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz
[     4.232] (II) FBDEV(0): Modeline "current"x0.0   48.00  800 832 928 1024  600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
[     4.232] (==) FBDEV(0): DPI set to (96, 96)
[     4.232] (II) Loading sub module "fb"
[     4.232] (II) LoadModule: "fb"
[     4.232] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.233] (II) Module fb: vendor="X.Org Foundation"
[     4.233]  compiled for 1.20.8, module version = 1.0.0
[     4.233]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.233] (**) FBDEV(0): using shadow framebuffer
[     4.233] (II) Loading sub module "shadow"
[     4.233] (II) LoadModule: "shadow"
[     4.233] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     4.234] (II) Module shadow: vendor="X.Org Foundation"
[     4.234]  compiled for 1.20.8, module version = 1.1.0
[     4.234]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.234] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[     4.235] (==) FBDEV(0): Backing store enabled
[     4.237] (==) FBDEV(0): DPMS enabled
[     4.237] (II) Initializing extension Generic Event Extension
[     4.237] (II) Initializing extension SHAPE
[     4.237] (II) Initializing extension MIT-SHM
[     4.238] (II) Initializing extension XInputExtension
[     4.238] (II) Initializing extension XTEST
[     4.238] (II) Initializing extension BIG-REQUESTS
[     4.239] (II) Initializing extension SYNC
[     4.239] (II) Initializing extension XKEYBOARD
[     4.239] (II) Initializing extension XC-MISC
[     4.239] (II) Initializing extension SECURITY
[     4.240] (II) Initializing extension XFIXES
[     4.240] (II) Initializing extension RENDER
[     4.240] (II) Initializing extension RANDR
[     4.241] (II) Initializing extension COMPOSITE
[     4.241] (II) Initializing extension DAMAGE
[     4.241] (II) Initializing extension MIT-SCREEN-SAVER
[     4.242] (II) Initializing extension DOUBLE-BUFFER
[     4.242] (II) Initializing extension RECORD
[     4.242] (II) Initializing extension DPMS
[     4.242] (II) Initializing extension Present
[     4.243] (II) Initializing extension DRI3
[     4.243] (II) Initializing extension X-Resource
[     4.243] (II) Initializing extension XVideo
[     4.243] (II) Initializing extension XVideo-MotionCompensation
[     4.243] (II) Initializing extension SELinux
[     4.243] (II) SELinux: Disabled on system
[     4.243] (II) Initializing extension GLX
[     4.244] (II) AIGLX: Screen 0 is not DRI2 capable
[     4.370] (II) IGLX: Loaded and initialized swrast
[     4.370] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     4.370] (II) Initializing extension XFree86-VidModeExtension
[     4.370] (II) Initializing extension XFree86-DGA
[     4.370] (II) Initializing extension XFree86-DRI
[     4.370] (II) Initializing extension DRI2
[     4.419] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     4.419] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.419] (II) LoadModule: "libinput"
[     4.419] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.421] (II) Module libinput: vendor="X.Org Foundation"
[     4.421]  compiled for 1.20.8, module version = 0.30.0
[     4.421]  Module class: X.Org XInput Driver
[     4.421]  ABI class: X.Org XInput driver, version 24.1
[     4.421] (II) Using input driver 'libinput' for 'Power Button'
[     4.421] (**) Power Button: always reports core events
[     4.421] (**) Option "Device" "/dev/input/event4"
[     4.421] (**) Option "_source" "server/udev"
[     4.426] (II) event4  - Power Button: is tagged by udev as: Keyboard
[     4.426] (II) event4  - Power Button: device is a keyboard
[     4.426] (II) event4  - Power Button: device removed
[     4.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[     4.454] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.454] (**) Option "xkb_model" "pc105"
[     4.454] (**) Option "xkb_layout" "fr"
[     4.454] (**) Option "xkb_variant" "latin9"
[     4.484] (II) event4  - Power Button: is tagged by udev as: Keyboard
[     4.484] (II) event4  - Power Button: device is a keyboard
[     4.485] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     4.485] (II) No input driver specified, ignoring this device.
[     4.485] (II) This device may have been added with another device file.
[     4.485] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     4.485] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.485] (II) Using input driver 'libinput' for 'Power Button'
[     4.485] (**) Power Button: always reports core events
[     4.485] (**) Option "Device" "/dev/input/event3"
[     4.485] (**) Option "_source" "server/udev"
[     4.487] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     4.487] (II) event3  - Power Button: device is a keyboard
[     4.487] (II) event3  - Power Button: device removed
[     4.514] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[     4.514] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     4.514] (**) Option "xkb_model" "pc105"
[     4.514] (**) Option "xkb_layout" "fr"
[     4.514] (**) Option "xkb_variant" "latin9"
[     4.517] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     4.517] (II) event3  - Power Button: device is a keyboard
[     4.519] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event8)
[     4.519] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[     4.520] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[     4.520] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[     4.520] (**) Option "Device" "/dev/input/event8"
[     4.520] (**) Option "_source" "server/udev"
[     4.523] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[     4.523] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[     4.524] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[     4.590] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10/event8"
[     4.590] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 8)
[     4.590] (**) Option "xkb_model" "pc105"
[     4.590] (**) Option "xkb_layout" "fr"
[     4.590] (**) Option "xkb_variant" "latin9"
[     4.594] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[     4.595] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[     4.597] (II) config/udev: Adding input device ELAN1301:00 04F3:30C6 Mouse (/dev/input/event6)
[     4.597] (**) ELAN1301:00 04F3:30C6 Mouse: Applying InputClass "libinput pointer catchall"
[     4.597] (II) Using input driver 'libinput' for 'ELAN1301:00 04F3:30C6 Mouse'
[     4.597] (**) ELAN1301:00 04F3:30C6 Mouse: always reports core events
[     4.597] (**) Option "Device" "/dev/input/event6"
[     4.597] (**) Option "_source" "server/udev"
[     4.601] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: is tagged by udev as: Mouse Pointingstick
[     4.602] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: device is a pointer
[     4.603] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: device removed
[     4.666] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input8/event6"
[     4.666] (II) XINPUT: Adding extended input device "ELAN1301:00 04F3:30C6 Mouse" (type: MOUSE, id 9)
[     4.666] (**) Option "AccelerationScheme" "none"
[     4.666] (**) ELAN1301:00 04F3:30C6 Mouse: (accel) selected scheme none/0
[     4.666] (**) ELAN1301:00 04F3:30C6 Mouse: (accel) acceleration factor: 2.000
[     4.666] (**) ELAN1301:00 04F3:30C6 Mouse: (accel) acceleration threshold: 4
[     4.670] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: is tagged by udev as: Mouse Pointingstick
[     4.671] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: device is a pointer
[     4.674] (II) config/udev: Adding input device ELAN1301:00 04F3:30C6 Mouse (/dev/input/mouse0)
[     4.674] (II) No input driver specified, ignoring this device.
[     4.674] (II) This device may have been added with another device file.
[     4.675] (II) config/udev: Adding input device ELAN1301:00 04F3:30C6 Touchpad (/dev/input/event7)
[     4.675] (**) ELAN1301:00 04F3:30C6 Touchpad: Applying InputClass "libinput touchpad catchall"
[     4.675] (II) Using input driver 'libinput' for 'ELAN1301:00 04F3:30C6 Touchpad'
[     4.675] (**) ELAN1301:00 04F3:30C6 Touchpad: always reports core events
[     4.675] (**) Option "Device" "/dev/input/event7"
[     4.675] (**) Option "_source" "server/udev"
[     4.679] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: is tagged by udev as: Touchpad
[     4.684] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: device is a touchpad
[     4.684] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: device removed
[     4.735] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input9/event7"
[     4.735] (II) XINPUT: Adding extended input device "ELAN1301:00 04F3:30C6 Touchpad" (type: TOUCHPAD, id 10)
[     4.739] (**) Option "AccelerationScheme" "none"
[     4.740] (**) ELAN1301:00 04F3:30C6 Touchpad: (accel) selected scheme none/0
[     4.740] (**) ELAN1301:00 04F3:30C6 Touchpad: (accel) acceleration factor: 2.000
[     4.740] (**) ELAN1301:00 04F3:30C6 Touchpad: (accel) acceleration threshold: 4
[     4.744] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: is tagged by udev as: Touchpad
[     4.748] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: device is a touchpad
[     4.750] (II) config/udev: Adding input device ELAN1301:00 04F3:30C6 Touchpad (/dev/input/mouse1)
[     4.751] (II) No input driver specified, ignoring this device.
[     4.751] (II) This device may have been added with another device file.
[     4.752] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event1)
[     4.752] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     4.752] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[     4.752] (**) Asus WMI hotkeys: always reports core events
[     4.752] (**) Option "Device" "/dev/input/event1"
[     4.752] (**) Option "_source" "server/udev"
[     4.754] (II) event1  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[     4.755] (II) event1  - Asus WMI hotkeys: device is a keyboard
[     4.755] (II) event1  - Asus WMI hotkeys: device removed
[     4.802] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event1"
[     4.802] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[     4.802] (**) Option "xkb_model" "pc105"
[     4.802] (**) Option "xkb_layout" "fr"
[     4.802] (**) Option "xkb_variant" "latin9"
[     4.805] (II) event1  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[     4.805] (II) event1  - Asus WMI hotkeys: device is a keyboard
[     4.808] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.808] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     4.808] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     4.808] (**) AT Translated Set 2 keyboard: always reports core events
[     4.808] (**) Option "Device" "/dev/input/event0"
[     4.808] (**) Option "_source" "server/udev"
[     4.811] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.811] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     4.813] (II) event0  - AT Translated Set 2 keyboard: device removed
[     4.842] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.842] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     4.842] (**) Option "xkb_model" "pc105"
[     4.842] (**) Option "xkb_layout" "fr"
[     4.842] (**) Option "xkb_variant" "latin9"
[     4.846] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.846] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     4.850] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     4.850] (II) No input driver specified, ignoring this device.
[     4.850] (II) This device may have been added with another device file.
[    65.146] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    65.146] (II) No input driver specified, ignoring this device.
[    65.146] (II) This device may have been added with another device file.
[    65.147] (II) config/udev: Adding input device HDA Intel PCH Headset Mic (/dev/input/event9)
[    65.147] (II) No input driver specified, ignoring this device.
[    65.147] (II) This device may have been added with another device file.
[    82.673] (II) config/udev: Adding input device C&T EarPods_TC01_K9I (/dev/input/event11)
[    82.673] (**) C&T EarPods_TC01_K9I: Applying InputClass "libinput keyboard catchall"
[    82.673] (II) Using input driver 'libinput' for 'C&T EarPods_TC01_K9I'
[    82.673] (**) C&T EarPods_TC01_K9I: always reports core events
[    82.673] (**) Option "Device" "/dev/input/event11"
[    82.673] (**) Option "_source" "server/udev"
[    82.674] (II) event11 - C&T EarPods_TC01_K9I: is tagged by udev as: Keyboard
[    82.674] (II) event11 - C&T EarPods_TC01_K9I: device is a keyboard
[    82.675] (II) event11 - C&T EarPods_TC01_K9I: device removed
[    82.741] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.3/0003:2000:DD00.0002/input/input13/event11"
[    82.741] (II) XINPUT: Adding extended input device "C&T EarPods_TC01_K9I" (type: KEYBOARD, id 13)
[    82.741] (**) Option "xkb_model" "pc105"
[    82.741] (**) Option "xkb_layout" "fr"
[    82.741] (**) Option "xkb_variant" "latin9"
[    82.741] (WW) Option "xkb_options" requires a string value
[    82.744] (II) event11 - C&T EarPods_TC01_K9I: is tagged by udev as: Keyboard
[    82.744] (II) event11 - C&T EarPods_TC01_K9I: device is a keyboard
[    82.745] (EE) event7  - ELAN1301:00 04F3:30C6 Touchpad: client bug: event processing lagging behind by 66ms, your system is too slow



Tous les firmawares sont OK même avec realtek et non realteck ! kernal_panic.gif

Pour attirer les foules dans cette file, il faut peut-être parlé oenologie big_smile
car mes serveurs, et portables ont tous des noms de cépages ! mon Asus c'est du Pommard big_smile

Hors ligne

#31 03-11-2020 00:52:17

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

il faut que tu me donne les lignes entières des erreurs pour faire des recherches (pas tronqué a droite )

il me manque aussi le retour de lspci


lspci
 



ps : tu a aussi "lspci -vnk"  (en root) plus verbeux .

faudra peut être faire des demandes séparé , le wifi par exemple sur réseau , le dock sur système etc ......
il y a deux membres sur le forum qui si c'est possible te donneront une solution
il faut être réactif et précis dans tes réponses

maintenant que tu est sur le bureau ça va être plus facile
tu a juste a préciser en début que le dock branché et sans nomodeset=1 , debian ne démarre pas

ton gpu (un seul)


[     4.215] (--) PCI:*(0@0:2:0) 8086:3ea0:1043:17d1 rev 0, Mem @ 0x6000000000/16777216,
0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
 

Dernière modification par robert2a (03-11-2020 01:41:05)

Hors ligne

#32 03-11-2020 01:24:57

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

le journalctl avec les lignes complètes suite au reboot:

-- Logs begin at Tue 2020-11-03 00:16:17 CET, end at Tue 2020-11-03 00:18:00>
nov. 03 00:17:30 pommard wpa_supplicant[538]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0

nov. 03 00:17:19 pommard kernel: hdaudio hdaudioC0D2: Unable to bind the codec
nov. 03 00:17:19 pommard wpa_supplicant[538]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0

nov. 03 00:17:06 pommard wpa_supplicant[538]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0

nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: Unhandled alg: 0x71b
nov. 03 00:17:01 pommard wpa_supplicant[538]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: Unhandled alg: 0x707
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
 

Hors ligne

#33 03-11-2020 01:33:25

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

donc un reboot , tu a bien supprimé le dossier /var/log/journal , et les firmwares ok et le dock débranché ?
il manque la première ligne avec la date
et je vois plus d'erreur

tu a testé de nouveau sans "nomodeset=1" ?

un exemple sur ma machine (aucune erreur et la date du log)


journalctl -r -p err
-- Logs begin at Mon 2020-11-02 21:46:41 CET, end at Tue 2020-11-03 00:29:08 CET. --
-- No entries --
 


le dernier démarrage de ma machine est a 21h46 le 02/11/2020

comme info sur le log de X


[     4.200] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64
root=UUID=d81f20a8-e73c-4594-9ca6-745480ea954d ro nomodeset=1 quiet
 


tu vois comment le noyau est lancé (ici avec nomodeset=1)
idem tu a une date de fraîcheur


[     4.201] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  2 22:40:59 2020
 

Dernière modification par robert2a (03-11-2020 01:54:41)

Hors ligne

#34 03-11-2020 02:14:09

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

oups je vois la date tongue des erreurs maintenant  hmm
humm bref .........


-- Logs begin at Tue 2020-11-03 00:16:17 CET, end at Tue 2020-11-03 00:18:00>
 


donc de 00h16 a 00h18 le 03/11/2020
tu m'a fait une blague , il n'y a plus rien , que du wifi et rien de grave et un hdaudio

Hors ligne

#35 03-11-2020 09:47:39

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

Oui il n'y a rien de grave.
Voici le journal à l'instant au reboot avec nomodeset=1 et dock non-branché:

root@pommard:/home/thomas# journalctl -r -p err
-- Logs begin at Tue 2020-11-03 08:41:04 CET, end at Tue 2020-11-03 08:41:31>
nov. 03 08:41:18 pommard lightdm[719]: gkr-pam: unable to locate daemon cont>
nov. 03 08:41:05 pommard bluetoothd[537]: sap-server: Operation not permitte>
nov. 03 08:41:05 pommard bluetoothd[537]: profiles/sap/server.c:sap_server_r>
nov. 03 08:41:04 pommard kernel: firmware_class: See [url]https://wiki.debian.org[/url]>
nov. 03 08:41:04 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
 


Si je branche le dock et n'indique pas nomodeset, j'obtiens toujours un écran noir donc on a un pb avec le dock et encore autre chose .
Par exemple dans dmesg on voit un pb avec la webcam? regarde à 2.59s

[    2.593900] uvcvideo: Found UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56d3)
[    2.601852] uvcvideo: Failed to initialize entity for entity 6
[    2.601853] uvcvideo: Failed to register entities (-22).


dmesg complet:

[    0.076491] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.076506] process: using mwait in idle threads
[    0.076508] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.076508] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.076510] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.076511] Spectre V2 : Mitigation: Full generic retpoline
[    0.076512] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.076512] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.076513] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.076513] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.076514] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.076517] SRBDS: Mitigation: Microcode
[    0.076517] MDS: Mitigation: Clear CPU buffers
[    0.076661] Freeing SMP alternatives memory: 32K
[    0.078111] smpboot: CPU0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xb)
[    0.078201] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.078225] ... version:                4
[    0.078225] ... bit width:              48
[    0.078225] ... generic registers:      4
[    0.078226] ... value mask:             0000ffffffffffff
[    0.078226] ... max period:             00007fffffffffff
[    0.078226] ... fixed-purpose events:   3
[    0.078227] ... event mask:             000000070000000f
[    0.078254] rcu: Hierarchical SRCU implementation.
[    0.078547] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.078596] smp: Bringing up secondary CPUs ...
[    0.078648] x86: Booting SMP configuration:
[    0.078649] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.083366] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.083366]  #5 #6 #7
[    0.085878] smp: Brought up 1 node, 8 CPUs
[    0.085878] smpboot: Max logical packages: 1
[    0.085878] smpboot: Total of 8 processors activated (31999.48 BogoMIPS)
[    0.097786] node 0 deferred pages initialised in 12ms
[    0.100234] devtmpfs: initialized
[    0.100234] x86/mm: Memory block size: 128MB
[    0.100234] PM: Registering ACPI NVS region [mem 0x89881000-0x89932fff] (729088 bytes)
[    0.100234] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.100234] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.100234] pinctrl core: initialized pinctrl subsystem
[    0.100234] NET: Registered protocol family 16
[    0.100234] audit: initializing netlink subsys (disabled)
[    0.100234] audit: type=2000 audit(1604393421.048:1): state=initialized audit_enabled=0 res=1
[    0.100234] thermal_sys: Registered thermal governor 'fair_share'
[    0.100234] thermal_sys: Registered thermal governor 'bang_bang'
[    0.100234] thermal_sys: Registered thermal governor 'step_wise'
[    0.100234] thermal_sys: Registered thermal governor 'user_space'
[    0.100234] cpuidle: using governor ladder
[    0.100234] cpuidle: using governor menu
[    0.100234] ACPI: bus type PCI registered
[    0.100234] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.100234] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.100234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.100234] PCI: Using configuration type 1 for base access
[    0.101886] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.102266] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.102266] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.190986] ACPI: Added _OSI(Module Device)
[    0.190986] ACPI: Added _OSI(Processor Device)
[    0.190986] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.190986] ACPI: Added _OSI(Processor Aggregator Device)
[    0.190986] ACPI: Added _OSI(Linux-Dell-Video)
[    0.190986] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.190986] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.233836] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.239212] ACPI: Dynamic OEM Table Load:
[    0.239216] ACPI: SSDT 0xFFFF95D3346BA800 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.240120] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.241149] ACPI: Dynamic OEM Table Load:
[    0.241152] ACPI: SSDT 0xFFFF95D3346C6000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.242131] ACPI: Dynamic OEM Table Load:
[    0.242134] ACPI: SSDT 0xFFFF95D3076DB000 00053F (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.243148] ACPI: Dynamic OEM Table Load:
[    0.243150] ACPI: SSDT 0xFFFF95D334777E00 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.244058] ACPI: Dynamic OEM Table Load:
[    0.244062] ACPI: SSDT 0xFFFF95D3076D8000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.245147] ACPI: Dynamic OEM Table Load:
[    0.245150] ACPI: SSDT 0xFFFF95D3076DB800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.246163] ACPI: Dynamic OEM Table Load:
[    0.246165] ACPI: SSDT 0xFFFF95D3346C3800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.247192] ACPI: Dynamic OEM Table Load:
[    0.247196] ACPI: SSDT 0xFFFF95D3076F7000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.248522] ACPI: Dynamic OEM Table Load:
[    0.248524] ACPI: SSDT 0xFFFF95D3346C7C00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.251811] ACPI: EC: EC started
[    0.251811] ACPI: EC: interrupt blocked
[    0.254190] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.254191] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions
[    0.254192] ACPI: Interpreter enabled
[    0.254223] ACPI: (supports S0 S3 S4 S5)
[    0.254224] ACPI: Using IOAPIC for interrupt routing
[    0.254250] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.255064] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.259155] ACPI: Power Resource [PXP] (on)
[    0.377625] ACPI: Power Resource [PXP] (off)
[    0.379850] ACPI: Power Resource [BTPR] (on)
[    0.381521] ACPI: Power Resource [USBC] (on)
[    0.381745] ACPI: Power Resource [PAUD] (on)
[    0.386536] ACPI: Power Resource [V0PR] (on)
[    0.387126] ACPI: Power Resource [V1PR] (on)
[    0.387694] ACPI: Power Resource [V2PR] (on)
[    0.391566] ACPI: Power Resource [PXTC] (off)
[    0.395220] ACPI: Power Resource [WRST] (on)
[    0.407311] ACPI: Power Resource [FN00] (off)
[    0.407362] ACPI: Power Resource [FN01] (off)
[    0.407415] ACPI: Power Resource [FN02] (off)
[    0.407464] ACPI: Power Resource [FN03] (off)
[    0.407512] ACPI: Power Resource [FN04] (off)
[    0.407987] ACPI: Power Resource [PIN] (off)
[    0.408294] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.408298] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.410570] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.411334] PCI host bridge to bus 0000:00
[    0.411335] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.411336] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.411337] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.411338] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.411338] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.411339] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.411339] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.411340] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.411340] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.411341] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.411342] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.411342] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.411359] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
[    0.411631] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
[    0.411639] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
[    0.411643] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.411647] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.411659] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.411766] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.411774] pci 0000:00:04.0: reg 0x10: [mem 0x6001110000-0x6001117fff 64bit]
[    0.411917] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.411925] pci 0000:00:08.0: reg 0x10: [mem 0x600112a000-0x600112afff 64bit]
[    0.412071] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
[    0.412089] pci 0000:00:12.0: reg 0x10: [mem 0x6001129000-0x6001129fff 64bit]
[    0.412259] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
[    0.412273] pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit]
[    0.412325] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.412621] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
[    0.412636] pci 0000:00:14.2: reg 0x10: [mem 0x6001120000-0x6001121fff 64bit]
[    0.412646] pci 0000:00:14.2: reg 0x18: [mem 0x6001128000-0x6001128fff 64bit]
[    0.412784] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000
[    0.412805] pci 0000:00:14.3: reg 0x10: [mem 0x600111c000-0x600111ffff 64bit]
[    0.412935] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.413128] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000
[    0.413206] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.413610] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
[    0.413629] pci 0000:00:16.0: reg 0x10: [mem 0x6001126000-0x6001126fff 64bit]
[    0.413698] pci 0000:00:16.0: PME# supported from D3hot
[    0.413875] pci 0000:00:17.0: [8086:9dd3] type 00 class 0x010601
[    0.413887] pci 0000:00:17.0: reg 0x10: [mem 0x90100000-0x90101fff]
[    0.413893] pci 0000:00:17.0: reg 0x14: [mem 0x90103000-0x901030ff]
[    0.413898] pci 0000:00:17.0: reg 0x18: [io  0x3090-0x3097]
[    0.413905] pci 0000:00:17.0: reg 0x1c: [io  0x3080-0x3083]
[    0.413912] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.413917] pci 0000:00:17.0: reg 0x24: [mem 0x90102000-0x901027ff]
[    0.413952] pci 0000:00:17.0: PME# supported from D3hot
[    0.414095] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400
[    0.414163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.414186] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.414417] pci 0000:00:1e.0: [8086:9da8] type 00 class 0x078000
[    0.414495] pci 0000:00:1e.0: reg 0x10: [mem 0x6001125000-0x6001125fff 64bit]
[    0.414554] pci 0000:00:1e.0: reg 0x18: [mem 0x6001124000-0x6001124fff 64bit]
[    0.414888] pci 0000:00:1e.3: [8086:9dab] type 00 class 0x0c8000
[    0.415011] pci 0000:00:1e.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.415401] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
[    0.415690] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040380
[    0.415719] pci 0000:00:1f.3: reg 0x10: [mem 0x6001118000-0x600111bfff 64bit]
[    0.415755] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
[    0.415830] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.416338] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
[    0.416362] pci 0000:00:1f.4: reg 0x10: [mem 0x6001122000-0x60011220ff 64bit]
[    0.416390] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.416517] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
[    0.416531] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.416714] pci 0000:01:00.0: [15b7:5003] type 00 class 0x010802
[    0.416733] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x90003fff 64bit]
[    0.416951] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.416954] pci 0000:00:1d.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.418941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.418997] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[    0.419051] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419158] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419211] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419264] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419317] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.426900] ACPI: EC: interrupt unblocked
[    0.426900] ACPI: EC: event unblocked
[    0.426916] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.426916] ACPI: EC: GPE=0x50
[    0.426917] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC initialization complete
[    0.426918] ACPI: \_SB_.PCI0.LPCB.H_EC: EC: Used to handle transactions and events
[    0.426964] iommu: Default domain type: Translated
[    0.426971] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.426971] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.426971] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.426971] vgaarb: loaded
[    0.426971] EDAC MC: Ver: 3.0.0
[    0.429710] Registered efivars operations
[    0.429773] NetLabel: Initializing
[    0.429773] NetLabel:  domain hash size = 128
[    0.429773] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.429783] NetLabel:  unlabeled traffic allowed by default
[    0.429784] PCI: Using ACPI for IRQ routing
[    0.471871] PCI: pci_cache_line_size set to 64 bytes
[    0.472076] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.472077] e820: reserve RAM buffer [mem 0x822e1000-0x83ffffff]
[    0.472077] e820: reserve RAM buffer [mem 0x8234e000-0x83ffffff]
[    0.472078] e820: reserve RAM buffer [mem 0x8575b000-0x87ffffff]
[    0.472078] e820: reserve RAM buffer [mem 0x8a00f000-0x8bffffff]
[    0.472079] e820: reserve RAM buffer [mem 0x26e000000-0x26fffffff]
[    0.472566] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.472568] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.473710] clocksource: Switched to clocksource tsc-early
[    0.480274] VFS: Disk quotas dquot_6.6.0
[    0.480284] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.480365] AppArmor: AppArmor Filesystem Enabled
[    0.480377] pnp: PnP ACPI init
[    0.480463] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.480467] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.480610] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.480611] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.480613] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.480692] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.480694] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.480805] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.480940] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.480941] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.480941] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.480942] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.480943] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.480944] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.480944] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.480945] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.480947] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.481100] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.481101] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.481102] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.481103] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.481103] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.481104] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.481105] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.481107] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.481311] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.481313] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482081] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482915] pnp: PnP ACPI: found 8 devices
[    0.488120] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.488163] NET: Registered protocol family 2
[    0.488248] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.488283] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.488398] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.488446] TCP: Hash tables configured (established 65536 bind 65536)
[    0.488474] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.488492] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.488525] NET: Registered protocol family 1
[    0.488528] NET: Registered protocol family 44
[    0.488538] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[    0.488593] pci 0000:00:1e.3: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[    0.488647] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.488650] pci 0000:00:1d.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.488655] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.488656] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.488656] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.488657] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[    0.488657] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[    0.488658] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
[    0.488659] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
[    0.488659] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
[    0.488660] pci_bus 0000:00: resource 12 [mem 0x90000000-0xdfffffff window]
[    0.488660] pci_bus 0000:00: resource 13 [mem 0x4000000000-0x7fffffffff window]
[    0.488661] pci_bus 0000:00: resource 14 [mem 0xfc800000-0xfe7fffff window]
[    0.488662] pci_bus 0000:01: resource 1 [mem 0x90000000-0x900fffff]
[    0.488756] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.489094] PCI: CLS 64 bytes, default 64
[    0.489124] Trying to unpack rootfs image as initramfs...
[    0.789835] Freeing initrd memory: 31448K
[    0.789873] DMAR: No ATSR found
[    0.789926] DMAR: dmar0: Using Queued invalidation
[    0.789930] DMAR: dmar1: Using Queued invalidation
[    0.790137] pci 0000:00:00.0: Adding to iommu group 0
[    0.790146] pci 0000:00:02.0: Adding to iommu group 1
[    0.790157] pci 0000:00:04.0: Adding to iommu group 2
[    0.790166] pci 0000:00:08.0: Adding to iommu group 3
[    0.790187] pci 0000:00:12.0: Adding to iommu group 4
[    0.790207] pci 0000:00:14.0: Adding to iommu group 5
[    0.790216] pci 0000:00:14.2: Adding to iommu group 5
[    0.790224] pci 0000:00:14.3: Adding to iommu group 6
[    0.790237] pci 0000:00:15.0: Adding to iommu group 7
[    0.790249] pci 0000:00:16.0: Adding to iommu group 8
[    0.790258] pci 0000:00:17.0: Adding to iommu group 9
[    0.790271] pci 0000:00:1d.0: Adding to iommu group 10
[    0.790288] pci 0000:00:1e.0: Adding to iommu group 11
[    0.790297] pci 0000:00:1e.3: Adding to iommu group 11
[    0.790320] pci 0000:00:1f.0: Adding to iommu group 12
[    0.790330] pci 0000:00:1f.3: Adding to iommu group 12
[    0.790340] pci 0000:00:1f.4: Adding to iommu group 12
[    0.790350] pci 0000:00:1f.5: Adding to iommu group 12
[    0.790365] pci 0000:01:00.0: Adding to iommu group 13
[    0.793271] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.793272] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.793274] software IO TLB: mapped [mem 0x7de39000-0x81e39000] (64MB)
[    0.793363] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.793937] Initialise system trusted keyrings
[    0.793975] Key type blacklist registered
[    0.794033] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.795257] zbud: loaded
[    0.795419] integrity: Platform Keyring initialized
[    0.795421] Key type asymmetric registered
[    0.795422] Asymmetric key parser 'x509' registered
[    0.795429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.795475] io scheduler mq-deadline registered
[    0.798040] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    0.798097] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[    0.798132] pcieport 0000:00:1d.0: DPC: enabled with IRQ 122
[    0.798133] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.798228] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.798243] efifb: probing for efifb
[    0.798254] efifb: framebuffer at 0x4000000000, using 1920k, total 1920k
[    0.798255] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.798255] efifb: scrolling: redraw
[    0.798256] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.798341] Console: switching to colour frame buffer device 100x37
[    0.799332] fb0: EFI VGA frame buffer device
[    0.799339] intel_idle: MWAIT substates: 0x11142120
[    0.799339] intel_idle: v0.5.1 model 0x8E
[    0.799824] intel_idle: Local APIC timer is reliable in all C-states
[    0.803130] thermal LNXTHERM:00: registered as thermal_zone0
[    0.803131] ACPI: Thermal Zone [TZ00] (59 C)
[    0.803347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.804088] Linux agpgart interface v0.103
[    0.804115] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.804115] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.804708] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.804708] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.807931] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.808035] mousedev: PS/2 mouse device common for all mice
[    0.808275] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.809170] rtc_cmos rtc_cmos: registered as rtc0
[    0.809384] rtc_cmos rtc_cmos: setting system clock to 2020-11-03T08:50:22 UTC (1604393422)
[    0.809399] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.809406] intel_pstate: Intel P-state driver initializing
[    0.810246] intel_pstate: HWP enabled
[    0.810389] ledtrig-cpu: registered to indicate activity on CPUs
[    0.810895] NET: Registered protocol family 10
[    0.815716] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.818309] Segment Routing with IPv6
[    0.818324] mip6: Mobile IPv6
[    0.818325] NET: Registered protocol family 17
[    0.818543] mpls_gso: MPLS GSO support
[    0.819429] microcode: sig=0x806eb, pf=0x80, revision=0xd6
[    0.819686] microcode: Microcode Update Driver: v2.2.
[    0.819689] IPI shorthand broadcast: enabled
[    0.819698] sched_clock: Marking stable (814848666, 4490523)->(823760521, -4421332)
[    0.820193] registered taskstats version 1
[    0.820194] Loading compiled-in X.509 certificates
[    0.851172] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    0.851186] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    0.851208] zswap: loaded using pool lzo/zbud
[    0.852075] Key type ._fscrypt registered
[    0.852076] Key type .fscrypt registered
[    0.852076] Key type fscrypt-provisioning registered
[    0.852145] AppArmor: AppArmor sha1 policy hashing enabled
[    0.853584] integrity: Loading X.509 certificate: UEFI:db
[    0.853766] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    0.853767] integrity: Loading X.509 certificate: UEFI:db
[    0.854032] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    0.854032] integrity: Loading X.509 certificate: UEFI:db
[    0.854049] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.854049] integrity: Loading X.509 certificate: UEFI:db
[    0.854067] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.854067] integrity: Loading X.509 certificate: UEFI:db
[    0.854213] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.857908] Freeing unused kernel image (initmem) memory: 1636K
[    0.930230] Write protecting the kernel read-only data: 18432k
[    0.931581] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.931883] Freeing unused kernel image (rodata/data gap) memory: 332K
[    1.005075] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.005079] Run /init as init process
[    1.005080]   with arguments:
[    1.005080]     /init
[    1.005081]   with environment:
[    1.005081]     HOME=/
[    1.005081]     TERM=linux
[    1.005082]     BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64
[    1.078895] hid: raw HID events driver (C) Jiri Kosina
[    1.092475] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.092667] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.099276] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    1.099642] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.104362] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.104429] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.107406] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.109171] SCSI subsystem initialized
[    1.120070] ACPI: bus type USB registered
[    1.120091] usbcore: registered new interface driver usbfs
[    1.120098] usbcore: registered new interface driver hub
[    1.120137] usbcore: registered new device driver usb
[    1.125137] nvme nvme0: pci function 0000:01:00.0
[    1.129628] libata version 3.00 loaded.
[    1.133379] nvme nvme0: 8/0/0 default/read/poll queues
[    1.133488] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    1.136009] ahci 0000:00:17.0: version 3.0
[    1.136022] ahci 0000:00:17.0: enabling device (0000 -> 0003)
[    1.136319] i2c_hid i2c-ELAN1301:00: supply vdd not found, using dummy regulator
[    1.136361] i2c_hid i2c-ELAN1301:00: supply vddl not found, using dummy regulator
[    1.136393] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode
[    1.136397] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst
[    1.137078] scsi host0: ahci
[    1.137308] scsi host1: ahci
[    1.137430] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.137439] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.137455] scsi host2: ahci
[    1.137561] ata1: DUMMY
[    1.137562] ata2: DUMMY
[    1.137566] ata3: SATA max UDMA/133 abar m2048@0x90102000 port 0x90102200 irq 132
[    1.138556] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    1.138562] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.138780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[    1.138782] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.138783] usb usb1: Product: xHCI Host Controller
[    1.138784] usb usb1: Manufacturer: Linux 5.9.0-1-amd64 xhci-hcd
[    1.138785] usb usb1: SerialNumber: 0000:00:14.0
[    1.138921] hub 1-0:1.0: USB hub found
[    1.138940] hub 1-0:1.0: 12 ports detected
[    1.139678]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
[    1.140108] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.140111] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.140114] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.140156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[    1.140158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.140159] usb usb2: Product: xHCI Host Controller
[    1.140160] usb usb2: Manufacturer: Linux 5.9.0-1-amd64 xhci-hcd
[    1.140161] usb usb2: SerialNumber: 0000:00:14.0
[    1.140282] hub 2-0:1.0: USB hub found
[    1.140298] hub 2-0:1.0: 6 ports detected
[    1.140475] usb: port power management may be unreliable
[    1.286377] i2c i2c-1: Failed to register i2c client XXXX0000:01 at 0x15 (-16)
[    1.286406] i2c i2c-1: failed to add I2C device XXXX0000:01 from ACPI
[    1.286683] i2c i2c-1: Failed to register i2c client XXXX0000:03 at 0x15 (-16)
[    1.286705] i2c i2c-1: failed to add I2C device XXXX0000:03 from ACPI
[    1.286900] i2c i2c-1: Failed to register i2c client XXXX0000:05 at 0x15 (-16)
[    1.286923] i2c i2c-1: failed to add I2C device XXXX0000:05 from ACPI
[    1.305829] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    1.306517] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    1.307046] dw-apb-uart.1: ttyS0 at MMIO 0x6001125000 (irq = 20, base_baud = 7500000) is a 16550A
[    1.307834] intel-lpss 0000:00:1e.3: enabling device (0000 -> 0002)
[    1.308430] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    1.451355] ata3: SATA link down (SStatus 4 SControl 300)
[    1.461506] input: ELAN1301:00 04F3:30C6 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input1
[    1.461760] input: ELAN1301:00 04F3:30C6 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input2
[    1.462005] hid-generic 0018:04F3:30C6.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1301:00 04F3:30C6] on i2c-ELAN1301:00
[    1.473750] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.542460] PM: Image not found (code -22)
[    1.648598] usb 1-4: New USB device found, idVendor=13d3, idProduct=56d3, bcdDevice=18.54
[    1.648600] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.648601] usb 1-4: Product: USB2.0 HD UVC WebCam
[    1.648602] usb 1-4: Manufacturer: Azurewave
[    1.648604] usb 1-4: SerialNumber: 0x0001
[    1.660616] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null)
[    1.706614] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    1.758056] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    1.770639] systemd[1]: Inserted module 'autofs4'
[    1.777799] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    1.809732] tsc: Refined TSC clocksource calibration: 1992.018 MHz
[    1.809740] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d7369390, max_idle_ns: 881590493256 ns
[    1.809959] clocksource: Switched to clocksource tsc
[    1.854527] systemd[1]: systemd 246.6-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.874277] systemd[1]: Detected architecture x86-64.
[    1.894627] systemd[1]: Set hostname to <pommard>.
[    1.927038] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[    1.927042] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.002306] systemd[1]: Queued start job for default target Graphical Interface.
[    2.003330] systemd[1]: Created slice system-getty.slice.
[    2.003623] systemd[1]: Created slice system-modprobe.slice.
[    2.003853] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.004111] systemd[1]: Created slice User and Session Slice.
[    2.004177] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.004229] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.004418] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.004462] systemd[1]: Reached target Local Encrypted Volumes.
[    2.004498] systemd[1]: Reached target Paths.
[    2.004518] systemd[1]: Reached target Remote File Systems.
[    2.004533] systemd[1]: Reached target Slices.
[    2.004680] systemd[1]: Listening on Syslog Socket.
[    2.004783] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.004840] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.005000] systemd[1]: Listening on Journal Audit Socket.
[    2.005094] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.005206] systemd[1]: Listening on Journal Socket.
[    2.005352] systemd[1]: Listening on udev Control Socket.
[    2.005443] systemd[1]: Listening on udev Kernel Socket.
[    2.006375] systemd[1]: Mounting Huge Pages File System...
[    2.007300] systemd[1]: Mounting POSIX Message Queue File System...
[    2.008265] systemd[1]: Mounting Kernel Debug File System...
[    2.009366] systemd[1]: Mounting Kernel Trace File System...
[    2.010595] systemd[1]: Starting Set the console keyboard layout...
[    2.012070] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.013076] systemd[1]: Starting Load Kernel Module drm...
[    2.013454] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.013502] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.015246] systemd[1]: Starting Journal Service...
[    2.016659] systemd[1]: Starting Load Kernel Modules...
[    2.017657] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.018930] systemd[1]: Starting Coldplug All udev Devices...
[    2.021673] systemd[1]: Mounted Huge Pages File System.
[    2.022010] systemd[1]: Mounted POSIX Message Queue File System.
[    2.022186] systemd[1]: Mounted Kernel Debug File System.
[    2.022351] systemd[1]: Mounted Kernel Trace File System.
[    2.023120] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.029998] systemd[1]: Finished Load Kernel Modules.
[    2.030342] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    2.030482] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[    2.031556] EXT4-fs (nvme0n1p7): re-mounted. Opts: errors=remount-ro
[    2.031953] systemd[1]: Starting Apply Kernel Variables...
[    2.034434] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.035428] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.035491] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.036850] systemd[1]: Starting Load/Save Random Seed...
[    2.038307] systemd[1]: Starting Create System Users...
[    2.043384] systemd[1]: Finished Apply Kernel Variables.
[    2.052206] systemd[1]: Finished Load/Save Random Seed.
[    2.055311] systemd[1]: Finished Create System Users.
[    2.056660] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.070925] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.073204] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    2.073707] systemd[1]: modprobe@drm.service: Succeeded.
[    2.074310] systemd[1]: Finished Load Kernel Module drm.
[    2.112723] systemd[1]: Finished Set the console keyboard layout.
[    2.112899] systemd[1]: Reached target Local File Systems (Pre).
[    2.123211] systemd[1]: Finished Coldplug All udev Devices.
[    2.124614] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[    2.128083] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[    2.133364] systemd[1]: Started Rule-based Manager for Device Events and Files.
[    2.180382] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:00/PNP0C0D:00/input/input3
[    2.189584] intel_pmc_core INT33A1:00:  initialized
[    2.193843] ACPI: Lid Switch [LID0]
[    2.194017] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    2.194070] ACPI: Power Button [PWRB]
[    2.194162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    2.194226] ACPI: Power Button [PWRF]
[    2.354149] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    2.358896] systemd[1]: Found device WDC PC SN520 SDAPNUW-256G-1002 8.
[    2.360616] mc: Linux media interface: v0.10
[    2.365343] intel_rapl_common: Found RAPL domain package
[    2.365345] intel_rapl_common: Found RAPL domain dram
[    2.366378] systemd[1]: Found device WDC PC SN520 SDAPNUW-256G-1002 SYSTEM.
[    2.371267] systemd[1]: Activating swap /dev/disk/by-uuid/7782352e-719b-4ef8-8969-987f5f975373...
[    2.372568] systemd[1]: Starting File System Check on /dev/disk/by-uuid/8EA6-FE87...
[    2.377209] EFI Variables Facility v0.08 2004-May-17
[    2.378327] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.378824] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    2.380254] iTCO_vendor_support: vendor-support=0
[    2.395478] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.396402] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    2.397361] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    2.397812] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.399451] systemd[1]: Started File System Check Daemon to report status.
[    2.400131] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    2.400282] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    2.412538] cryptd: max_cpu_qlen set to 1000
[    2.413085] videodev: Linux video capture interface: v2.00
[    2.414161] pstore: Using crash dump compression: deflate
[    2.414171] pstore: Registered efi as persistent store backend
[    2.447053] systemd[1]: Finished File System Check on /dev/disk/by-uuid/8EA6-FE87.
[    2.448410] systemd[1]: Mounting /boot/efi...
[    2.542325] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.545604] Intel(R) Wireless WiFi driver for Linux
[    2.545660] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    2.547709] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.547756] AVX2 version of gcm_enc/dec engaged.
[    2.547757] AES CTR mode by8 optimization enabled
[    2.547794] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    2.552371] iwlwifi 0000:00:14.3: firmware: direct-loading firmware iwlwifi-9000-pu-b0-jf-b0-46.ucode
[    2.552394] iwlwifi 0000:00:14.3: WRT: Overriding region id 0
[    2.552395] iwlwifi 0000:00:14.3: WRT: Overriding region id 1
[    2.552397] iwlwifi 0000:00:14.3: WRT: Overriding region id 2
[    2.552398] iwlwifi 0000:00:14.3: WRT: Overriding region id 3
[    2.552399] iwlwifi 0000:00:14.3: WRT: Overriding region id 4
[    2.552400] iwlwifi 0000:00:14.3: WRT: Overriding region id 6
[    2.552401] iwlwifi 0000:00:14.3: WRT: Overriding region id 8
[    2.552402] iwlwifi 0000:00:14.3: WRT: Overriding region id 9
[    2.552403] iwlwifi 0000:00:14.3: WRT: Overriding region id 10
[    2.552404] iwlwifi 0000:00:14.3: WRT: Overriding region id 11
[    2.552405] iwlwifi 0000:00:14.3: WRT: Overriding region id 15
[    2.552406] iwlwifi 0000:00:14.3: WRT: Overriding region id 16
[    2.552407] iwlwifi 0000:00:14.3: WRT: Overriding region id 18
[    2.552408] iwlwifi 0000:00:14.3: WRT: Overriding region id 19
[    2.552409] iwlwifi 0000:00:14.3: WRT: Overriding region id 20
[    2.552410] iwlwifi 0000:00:14.3: WRT: Overriding region id 21
[    2.552416] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
[    2.552417] iwlwifi 0000:00:14.3: Found debug configuration: 0
[    2.552793] iwlwifi 0000:00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
[    2.552813] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2)
[    2.552850] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[    2.557779] Adding 1000444k swap on /dev/nvme0n1p8.  Priority:-2 extents:1 across:1000444k SSFS
[    2.564536] systemd[1]: Activated swap /dev/disk/by-uuid/7782352e-719b-4ef8-8969-987f5f975373.
[    2.564654] systemd[1]: Reached target Swap.
[    2.568120] input: ELAN1301:00 04F3:30C6 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input7
[    2.568253] input: ELAN1301:00 04F3:30C6 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input8
[    2.570366] hid-multitouch 0018:04F3:30C6.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1301:00 04F3:30C6] on i2c-ELAN1301:00
[    2.572777] asus_wmi: ASUS WMI generic driver loaded
[    2.577442] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.577444] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.577444] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.577445] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.577446] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.577446] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.577953] asus_wmi: Initialization: 0x1
[    2.578248] asus_wmi: BIOS WMI version: 8.1
[    2.578523] asus_wmi: SFUN value: 0x4a0061
[    2.578528] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[    2.578531] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[    2.586013] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9
[    2.593900] uvcvideo: Found UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56d3)
[    2.601852] uvcvideo: Failed to initialize entity for entity 6
[    2.601853] uvcvideo: Failed to register entities (-22).
[    2.601944] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10
[    2.618886] usbcore: registered new interface driver uvcvideo
[    2.618887] USB Video Class driver (1.1.1)
[    2.629762] battery: new extension: ASUS Battery Extension
[    2.687794] systemd[1]: Mounted /boot/efi.
[    2.687938] systemd[1]: Reached target Local File Systems.
[    2.689452] systemd[1]: Starting Load AppArmor profiles...
[    2.690862] systemd[1]: Starting Set console font and keymap...
[    2.690957] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[    2.691031] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[    2.695127] systemd[1]: Started Journal Service.
[    2.738033] audit: type=1400 audit(1604389824.420:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=401 comm="apparmor_parser"
[    2.738038] audit: type=1400 audit(1604389824.420:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=400 comm="apparmor_parser"
[    2.738424] audit: type=1400 audit(1604389824.424:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=399 comm="apparmor_parser"
[    2.738974] audit: type=1400 audit(1604389824.424:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=397 comm="apparmor_parser"
[    2.738977] audit: type=1400 audit(1604389824.424:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=397 comm="apparmor_parser"
[    2.741588] audit: type=1400 audit(1604389824.424:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=404 comm="apparmor_parser"
[    2.741593] audit: type=1400 audit(1604389824.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=404 comm="apparmor_parser"
[    2.741597] audit: type=1400 audit(1604389824.424:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=404 comm="apparmor_parser"
[    2.741907] audit: type=1400 audit(1604389824.428:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=402 comm="apparmor_parser"
[    2.922693] iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318
[    3.016702] iwlwifi 0000:00:14.3: base HW address: fc:77:74:62:b8:53
[    3.027570] intel_rapl_common: Found RAPL domain package
[    3.027573] intel_rapl_common: Found RAPL domain core
[    3.027574] intel_rapl_common: Found RAPL domain uncore
[    3.027575] intel_rapl_common: Found RAPL domain dram
[    3.035442] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    3.059090] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    3.059122] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.097283] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.097730] thermal thermal_zone6: failed to read out thermal zone (-61)
[    3.112950] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    3.208693] Bluetooth: Core ver 2.22
[    3.208713] NET: Registered protocol family 31
[    3.208714] Bluetooth: HCI device and connection manager initialized
[    3.208719] Bluetooth: HCI socket layer initialized
[    3.208724] Bluetooth: L2CAP socket layer initialized
[    3.208735] Bluetooth: SCO socket layer initialized
[    3.219256] usbcore: registered new interface driver btusb
[    3.220671] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[    3.221676] Bluetooth: hci0: Device revision is 2
[    3.221678] Bluetooth: hci0: Secure boot is enabled
[    3.221679] Bluetooth: hci0: OTP lock is enabled
[    3.221680] Bluetooth: hci0: API lock is enabled
[    3.221681] Bluetooth: hci0: Debug lock is disabled
[    3.221683] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    3.224090] bluetooth hci0: firmware: direct-loading firmware intel/ibt-17-16-1.sfi
[    3.224095] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[    3.478490] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.478492] Bluetooth: BNEP filters: protocol multicast
[    3.478497] Bluetooth: BNEP socket layer initialized
[    4.790039] Bluetooth: hci0: Waiting for firmware download to complete
[    4.790683] Bluetooth: hci0: Firmware loaded in 1534132 usecs
[    4.790808] Bluetooth: hci0: Waiting for device to boot
[    4.804632] Bluetooth: hci0: Device booted in 13619 usecs
[    4.804934] bluetooth hci0: firmware: direct-loading firmware intel/ibt-17-16-1.ddc
[    4.804937] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[    4.806754] Bluetooth: hci0: Applying Intel DDC parameters completed
[    4.809823] Bluetooth: hci0: Firmware revision 0.1 build 241 week 36 2020
[    4.870575] NET: Registered protocol family 38
[   20.737856] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[   20.886824] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5012, bcdDevice= 1.00
[   20.886831] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   20.886836] usb 1-1: Product: USB2.0 Hub
[   20.886840] usb 1-1: Manufacturer: Fresco Logic, Inc.
[   20.887888] hub 1-1:1.0: USB hub found
[   20.887940] hub 1-1:1.0: 5 ports detected
[   21.013920] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[   21.035234] usb 2-1: New USB device found, idVendor=1d5c, idProduct=5002, bcdDevice= 1.00
[   21.035240] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   21.035244] usb 2-1: Product: USB3.0 Hub
[   21.035246] usb 2-1: Manufacturer: Fresco Logic, Inc.
[   21.037135] hub 2-1:1.0: USB hub found
[   21.037212] hub 2-1:1.0: 4 ports detected
[   21.450281] usb 1-1.2: new high-speed USB device number 5 using xhci_hcd
[   21.550586] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0801, bcdDevice= 1.00
[   21.550593] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   21.550597] usb 1-1.2: Product: USB 2.0 Hub
[   21.551697] hub 1-1.2:1.0: USB hub found
[   21.551740] hub 1-1.2:1.0: 4 ports detected
[   21.629838] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[   21.651670] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[   21.651672] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[   21.651674] usb 2-1.1: Product: USB 10/100/1000 LAN
[   21.651675] usb 2-1.1: Manufacturer: Realtek
[   21.651676] usb 2-1.1: SerialNumber: 000001
[   21.862325] usb 1-1.2.2: new full-speed USB device number 6 using xhci_hcd
[   21.986652] usb 1-1.2.2: New USB device found, idVendor=2000, idProduct=dd00, bcdDevice=11.16
[   21.986658] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   21.986661] usb 1-1.2.2: Product: EarPods_TC01_K9I
[   21.986664] usb 1-1.2.2: Manufacturer: C&T
[   21.986667] usb 1-1.2.2: SerialNumber: U2dc0z7ws53a79rn
[   22.009824] input: C&T EarPods_TC01_K9I as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.3/0003:2000:DD00.0002/input/input11
[   22.074296] hid-generic 0003:2000:DD00.0002: input,hidraw1: USB HID v1.00 Device [C&T EarPods_TC01_K9I] on usb-0000:00:14.0-1.2.2/input3
[   22.074374] usbcore: registered new interface driver usbhid
[   22.074375] usbhid: USB HID core driver
[   22.081791] usbcore: registered new interface driver snd-usb-audio
[   25.110278] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   29.198144] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   33.286028] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   33.286122] usb usb2-port2: attempt power cycle
[   37.689867] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   41.761766] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   41.798691] usbcore: registered new interface driver r8152
[   41.808539] usbcore: registered new interface driver cdc_ether
[   41.882052] usb 2-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[   41.910655] r8152 2-1.1:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw
[   41.929515] r8152 2-1.1:1.0: load rtl8153a-4 v2 02/07/20 successfully
[   41.960061] r8152 2-1.1:1.0 eth0: v1.11.11
[   41.982735] r8152 2-1.1:1.0 enx00e04c68000f: renamed from eth0
[   45.735696] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c68000f: link becomes ready
[   45.735965] r8152 2-1.1:1.0 enx00e04c68000f: carrier on
[   46.057763] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   50.353784] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   54.665730] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   58.954114] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   59.608269] wlo1: authenticate with a0:04:60:b9:e5:e0
[   59.618297] wlo1: send auth to a0:04:60:b9:e5:e0 (try 1/3)
[   59.659922] wlo1: authenticated
[   59.661715] wlo1: associate with a0:04:60:b9:e5:e0 (try 1/3)
[   59.846278] wlo1: associate with a0:04:60:b9:e5:e0 (try 2/3)
[   59.895422] wlo1: RX AssocResp from a0:04:60:b9:e5:e0 (capab=0x431 status=0 aid=1)
[   59.922955] wlo1: associated
[   60.464696] iwlwifi 0000:00:14.3: No beacon heard and the time event is over already...
[   60.464795] wlo1: Connection to AP a0:04:60:b9:e5:e0 lost
[   63.250106] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   64.525734] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
[   64.556721] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC294: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[   64.556724] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   64.556725] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   64.556726] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   64.556727] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   64.556728] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   64.556729] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   65.009486] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[   65.009681] hdaudio hdaudioC0D2: Unable to bind the codec
[   65.009979] input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   65.010058] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   67.464019] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   70.555517] wlo1: authenticate with a0:04:60:b9:e5:e0
[   70.567910] wlo1: send auth to a0:04:60:b9:e5:e0 (try 1/3)
[   70.713083] wlo1: send auth to a0:04:60:b9:e5:e0 (try 2/3)
[   70.720440] wlo1: authenticated
[   70.724730] wlo1: associate with a0:04:60:b9:e5:e0 (try 1/3)
[   70.910301] wlo1: associate with a0:04:60:b9:e5:e0 (try 2/3)
[   70.945201] wlo1: RX AssocResp from a0:04:60:b9:e5:e0 (capab=0x431 status=0 aid=1)
[   70.960795] wlo1: associated
[   71.526932] iwlwifi 0000:00:14.3: No beacon heard and the time event is over already...
[   71.527024] wlo1: Connection to AP a0:04:60:b9:e5:e0 lost
[   71.724293] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   75.994051] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
root@pommard:/home/thomas#
 

Dernière modification par NormandiePi (03-11-2020 09:59:56)

Hors ligne

#36 03-11-2020 11:41:23

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

Bonjour
ton cpu => https://www.intel.fr/content/www/fr/fr/ … 8265u.html

vue que intel n'a pas modifié quelque chose depuis la série "skylake" je vois pas trop le souci pour le gpu intégré
tu a essayé de désactivé le "secure-boot" dans le bios ?
il me manque toujours le retour de lspci


lspci
 



depuis le début aussi tu fais les tests avec le dock et nomodeset=1
tu peu pas simplement démarrer avec le dock et nomodeset=1
ou sans le dock et sans nomodeset=1

essaie de poster le retour de la commande "lspci"

Hors ligne

#37 03-11-2020 11:55:36

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

si tu veut essayer celle ci


lspci -nnk | grep -i vga -A3
 

Hors ligne

#38 03-11-2020 12:24:47

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

je pense aussi que dans le bios en plus de désactiver le secure-boot , désactiver tout ce qui touche a la sécurité qui pourrai empêcher debian de démarrer
et le dock de fonctionner correctement
il reste la question du ou des gpu sur cette machine , mais il me faut le retour des commandes

que windows 10 soit instable avec cette machine c'est pas rassurant (de ton #1 )

=> https://wiki.archlinux.org/index.php/AS … X430/UX530

Dernière modification par robert2a (03-11-2020 12:41:17)

Hors ligne

#39 03-11-2020 15:14:22

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

je vais laisser tomber ce fil
quelques liens
=> https://www.kernel.org/doc/html/v4.13/a … rbolt.html
=> https://wiki.archlinux.org/index.php/Thunderbolt
=> https://www.kernel.org/doc/html/latest/ … rbolt.html
=> https://forum.ubuntu-fr.org/viewtopic.php?id=2037545
=> https://www.phoronix.com/scan.php?page= … rbolt-Work  (ton noyau est supérieur au 5.2 )

une recherche avec "linux Thunderbolt" te donnera des réponses pour GNU Linux
ça pour le dock en USB3 type C et supérieur

pour le gpu intel aucune difficulté ( a moins d un bug ) , il est pris en charge par le noyau
au pire tu peu enlever le paquet de X (moins performant)


apt-get remove --purge xserver-xorg-video-intel
 



pour moi tout est dans la configuration du bios et la sécurité
le secure boot , le module TPM si il existe , la sécurité pour Thunderbolt
Bonne lecture @++

Hors ligne

#40 03-11-2020 15:39:19

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

Merci encore pour tout le temps que tu as passé.

J'avais fait des tests encore hier soir avec toutes les combinaisons:
1. boot avec dock branché sans nomodeset=1 : crash, écran noir au démarrage
2. boot sans dock sans nomodeset=1 : crash, écran noir au démarrage
3. boot avec dock branché avec nomodeset=1 : OK, j'arrive à me connecter
4. boot sans dock avec nomodeset=1 : OK, j'arrive à me connecter

résultat du lspci:

root@pommard:/home/thomas# lspci -nnk | grep -i vga -A3
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 620 (Whiskey Lake) [8086:3ea0]
  DeviceName: Onboard - Video
  Subsystem: ASUSTeK Computer Inc. UHD Graphics 620 (Whiskey Lake) [1043:17d1]
  Kernel modules: i915
 



Je viens de faire une MAJ de i2c-tools:

apt-get install i2c-tools
 

Dernière modification par NormandiePi (03-11-2020 16:13:30)

Hors ligne

#41 03-11-2020 15:56:03

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

teste ceci


dmesg | grep drm
 

Hors ligne

#42 03-11-2020 16:14:44

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

voici le résultat:

root@pommard:/home/thomas# dmesg | grep drm
[    2.064502] systemd[1]: Starting Load Kernel Module drm...
[    2.113382] systemd[1]: modprobe@drm.service: Succeeded.
[    2.113963] systemd[1]: Finished Load Kernel Module drm.
 



Pour le pb de ma webcam, c'est étrange car ici:
https://www.ideasonboard.org/uvc/
on ne voit pas la ref de ma webcam mais les ref : 13d3:5* qui ont des soucis.

UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56d3)

Dernière modification par NormandiePi (03-11-2020 16:21:36)

Hors ligne

#43 03-11-2020 16:22:51

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

correct puisque tu utilise "nomodeset=1"
si le noyau charge le firmware et les drm ça donne quelque chose de ce genre


dmesg | grep drm
[    3.265166] systemd[1]: Starting Load Kernel Module drm...
[    3.291512] systemd[1]: modprobe@drm.service: Succeeded.
[    3.291774] systemd[1]: Finished Load Kernel Module drm.
[    3.973467] [drm] amdgpu kernel modesetting enabled.
[    3.974113] fb0: switching to amdgpudrmfb from EFI VGA
[    3.976342] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1043:0x876B 0xC8).
[    3.976354] [drm] register mmio base: 0xFCB00000
[    3.976354] [drm] register mmio size: 524288
[    3.976368] [drm] add ip block number 0 <soc15_common>
[    3.976369] [drm] add ip block number 1 <gmc_v9_0>
[    3.976369] [drm] add ip block number 2 <vega10_ih>
[    3.976370] [drm] add ip block number 3 <psp>
[    3.976370] [drm] add ip block number 4 <gfx_v9_0>
[    3.976371] [drm] add ip block number 5 <sdma_v4_0>
[    3.976372] [drm] add ip block number 6 <powerplay>
[    3.976372] [drm] add ip block number 7 <dm>
[    3.976373] [drm] add ip block number 8 <vcn_v1_0>
[    3.998488] [drm] BIOS signature incorrect 0 0
[    3.999979] [drm] VCN decode is enabled in VM mode
[    3.999980] [drm] VCN encode is enabled in VM mode
[    3.999980] [drm] JPEG decode is enabled in VM mode
[    4.000045] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    4.000062] [drm] Detected VRAM RAM=3072M, BAR=3072M
[    4.000063] [drm] RAM width 128bits DDR4
[    4.000257] [drm] amdgpu: 3072M of VRAM memory ready
[    4.000261] [drm] amdgpu: 3072M of GTT memory ready.
[    4.000263] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    4.000427] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[    4.019622] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[    4.019633] [drm] PSP loading VCN firmware
[    4.040679] [drm] reserve 0x400000 from 0xf4bfc00000 for PSP TMR
[    4.269541] [drm] kiq ring mec 2 pipe 1 q 0
[    4.269953] [drm] DM_PPLIB: values for F clock
[    4.269954] [drm] DM_PPLIB:   400000 in kHz, 3649 in mV
[    4.269955] [drm] DM_PPLIB:   933000 in kHz, 4074 in mV
[    4.269956] [drm] DM_PPLIB:   1200000 in kHz, 4399 in mV
[    4.269957] [drm] DM_PPLIB:   1467000 in kHz, 4399 in mV
[    4.269959] [drm] DM_PPLIB: values for DCF clock
[    4.269960] [drm] DM_PPLIB:   300000 in kHz, 3649 in mV
[    4.269961] [drm] DM_PPLIB:   600000 in kHz, 4074 in mV
[    4.269961] [drm] DM_PPLIB:   626000 in kHz, 4250 in mV
[    4.269962] [drm] DM_PPLIB:   654000 in kHz, 4399 in mV
[    4.270203] [drm] Display Core initialized with v3.2.95!
[    4.310944] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[    4.313626] [drm] fb mappable at 0x20BCA000
[    4.313626] [drm] vram apper at 0x20000000
[    4.313627] [drm] size 8294400
[    4.313627] [drm] fb depth is 24
[    4.313628] [drm]    pitch is 7680
[    4.313693] fbcon: amdgpudrmfb (fb0) is primary device
[    4.389620] amdgpu 0000:08:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    4.417646] [drm] Initialized amdgpu 3.39.0 20150101 for 0000:08:00.0 on minor 0
 


et ton gpu fonctionne correctement (moi c'est un apu amd pour exemple )

tu a regardé cette histoire de sécurité dans le bios ?

Hors ligne

#44 03-11-2020 16:29:12

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

Oui j'ai bien "secure boot" disable et tous les autres trucs de security sur USB en autres sont "disable"
Avec Win10 et cet Asus, il faut être disable sinon impossible de booter sur une clé USB.

Dernière modification par NormandiePi (03-11-2020 16:29:49)

Hors ligne

#45 03-11-2020 16:31:30

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

le wiki debian


Prise en charge du noyau

Configuration du noyau

Si vous utilisez un noyau d'origine, tout devrait bien se passer.

Prise en charge de l'espace utilisateur

Outre la prise en charge du noyau évoquée ci-dessus, l'un des composants de l'espace utilisateur suivants peut être nécessaire pour le bon fonctionnement de votre webcam:

    libv4l-0 (voir la section 'wrappers' de son README)

Applications

Vidéo

    mplayer - Peut être utilisé pour afficher la vidéo de la webcam en appelant mplayer tv: //

    xawtv - Une suite de logiciels liés à video4linux, qui peut être utilisée pour visualiser des vidéos de webcam.

    cheese - "Cheese utilise votre webcam pour prendre des photos et des vidéos, applique des effets spéciaux sophistiqués et vous permet de partager le plaisir avec les autres."

    camorama - N'a pas été mis à jour depuis 2007, mais il fonctionne comme une simple visionneuse de webcam.

    mouvement - Détection de mouvement à l'aide d'une webcam.

    ekiga - "Ekiga (anciennement GnomeMeeting) est une application VoIP et de vidéoconférence open source pour GNOME."

    kopete - Le client de messagerie instantanée KDE - prend en charge la vidéo pour divers protocoles.

D'autres applications sont répertoriées ici .

Du son

Parfois, les webcams incluent un microphone à l'intérieur. Vérifiez le niveau d'entrée avec un mélangeur:

    alsamixer (dans alsa-utils )

    KMix (en kmix )

    GNOME alsamixer (dans gnome-alsamixer )

    alsamixergui

Ressources individuelles de caméra / chipset

    Logitech QuickCam Express (046d: 0840) (français)

    Logitech QuickCam Messenger (046d: 08da) (français)

    ALi Corp. Asus PW210 - Webcam intégrée (0402: 5602)

    pwc et pwcx (français)

    Pixart Imaging, Inc

 



le lien ici =>  https://wiki.debian.org/Webcam

tu a le paquet  "libv4l-0" que tu peut installer (il est installé sur ma machine )

Dernière modification par robert2a (03-11-2020 16:35:33)

Hors ligne

#46 03-11-2020 16:43:01

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

tu a le paquet  "libv4l-0" que tu peut installer (il est installé sur ma machine )


J'étais en train de voir ça avant que tu me le demande.
J'ai le paquet d'installer.
Je pars en réunion.

Hors ligne

#47 03-11-2020 16:58:08

robert2a
Membre
Inscription : 15-11-2014

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

ok bonne recherche  smile  et bonne réunion

Hors ligne

#48 09-11-2020 23:49:33

NormandiePi
Membre
Lieu : Orne
Distrib. : Debian 10.6
Noyau : Linux Kernel 4.19.0
(G)UI : XFCE
Inscription : 29-10-2020

Re : [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431

Bonsoir,
Après une longue pause (1 semaine), je me suis remis sur mon problème d'installation de la Debian sur mon Asus Zenbook.

La version qui permet d'aller plus loin est la version bullseye testing.

Il y a plusieurs problème:
Je n'arrive à me connecter que si j'ajoute "nomodeset=1" dans le GRUB
mais j'ai un écran 800x600
1. problème de son (USB2-port2 dans kern.log)
2. problème I2C
3. peut-être d'autres problèmes liés au dock au moins.

Pour le problème de son, j'ai pu temporairement avoir du son uniquement sur le PC mais pas avec l'enceinte branchée sur le dock car il y a un souci à ce niveau.

Voici ce qui est branché sur les ports USB:

root@pommard:/home/thomas# lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 10000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
        |__ Port 2: Dev 6, If 0, Class=Hub, Driver=hub/4p, 480M
            |__ Port 2: Dev 7, If 1, Class=Audio, Driver=snd-usb-audio, 12M
            |__ Port 2: Dev 7, If 2, Class=Audio, Driver=snd-usb-audio, 12M
            |__ Port 2: Dev 7, If 0, Class=Audio, Driver=snd-usb-audio, 12M
            |__ Port 2: Dev 7, If 3, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 4: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 10: Dev 4, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 10: Dev 4, If 1, Class=Wireless, Driver=btusb, 12M
 


J'ai cette erreur là (quand le dock est branché au portable)

thomas@pommard:~$ /usr/sbin/alsactl init
alsa-lib main.c:983:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
Found hardware: "HDA-Intel" "Realtek ALC294" "HDA:10ec0294,104317d1,00100004 HDA:8086280b,80860101,00100000" "0x1043" "0x17d1"
Hardware is initialized using a generic method
alsa-lib main.c:983:(snd_use_case_mgr_open) error: failed to import hw:1 use case configuration -2
Found hardware: "USB-Audio" "USB Mixer" "USB2000:dd00" "" ""
Hardware is initialized using a generic method
 



Solution trouvée: il faut désactiver le port USB2 sur lequel est branchée l'enceinte sur le dock:

root@pommard:/home/thomas# echo disabled | sudo tee /sys/bus/usb/devices/usb2/power/wakeup
 



Résultat:

disabled
 



Pour tester le son sur le portable:

speaker-test -c 2 -l 1 -t wav
 



NB: au prochain reboot, le port USB2-port2 sera à nouveau activé donc je n'aurai plus de son. J'ai au moins la solution palliative. Je pourrai soit mettre le port dans une blacklist ou avoir un script lancé au démarrage de la Debian Bullseye.
Je continue avec mon baton de pélerin pour résoudre les autres problèmes.
[MAJ 10/11/20] correction faute grammaire.

Dernière modification par NormandiePi (10-11-2020 11:45:38)

Hors ligne

Pied de page des forums