logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 20-11-2020 18:15:07

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Plus de sons.

Bonsoir à tous smile

Buster, XFCE.

Noyau :


Linux DEB-KOR 5.8.0-0.bpo.2-amd64 #1 SMP Debian 5.8.10-1~bpo10+1 (2020-09-26) x86_64 GNU/Linux

 




Bécane installée en juin. Les sons sortaient.
Plus à présent, et ce, avant la mise à jour.

Mais sur Zomm, ou autre site, l'utilisateur était vu, entendait les autres, mais eux ne le voyaient pas. Et ce, depuis le début, ce que j'ignorais.


lspci :


00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5500 (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
02:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
03:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01)
04:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)

 



J'ai pensé à une fausse manip. Mais ça vient peut-être bien de moi.

Regardez :

file.php?h=R685d4217e8250340feac6c98b777e979

Pas moyen d'activer les sons. Ni sur le casque (j'ai testé) ni sur les hauts-parleurs...

Que faire ?
Merci smile

Dernière modification par Lupa (20-11-2020 18:15:54)

Hors ligne

#2 20-11-2020 23:44:14

Anonyme-14
Invité

Re : Plus de sons.

Bonsoir, as-tu installé les drivers firmware-intel-sound non-free ?

#3 21-11-2020 08:17:57

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Bonjour.
Oui. Il y est.
C'est bien le paquet firmware-intel-soundxxx.deb ?

dmesg :


[    0.087334] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    5.164473] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    5.164703] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    5.758362] usb 2-5: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu
[    5.799175] usb 2-5: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu
[    5.864760] r8169 0000:02:00.1: firmware: direct-loading firmware rtl_nic/rtl8411-2.fw

 

Dernière modification par Lupa (21-11-2020 08:23:49)

Hors ligne

#4 21-11-2020 08:40:44

Anonyme-14
Invité

Re : Plus de sons.

que donne ?

cat /proc/asound/cards

Dernière modification par Anonyme-14 (21-11-2020 08:53:27)

#5 21-11-2020 08:56:58

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Ceci :



 0 [HDMI           ]: HDA-Intel - HDA Intel HDMI
                      HDA Intel HDMI at 0xc4210000 irq 53
 1 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xc4214000 irq 54

 

Hors ligne

#6 21-11-2020 09:06:03

Anonyme-14
Invité

Re : Plus de sons.

Peux-tu essayer

nano /etc/asound.conf


et ajouter les lignes

   
defaults.pcm.card 0
defaults.ctl.card 1
 


et un p'tit redémarrage éventuellement.

#7 21-11-2020 09:13:52

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Mais... Je n'ai pas ce fichier dans /etc...
Je le crée ?

Hors ligne

#8 21-11-2020 09:14:45

Anonyme-14
Invité

Re : Plus de sons.

oui, puis si cela ne donne rien, tu pourras le supprimer

#9 21-11-2020 09:20:27

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Je l'ai créé. Avec ces deux lignes.
Même pépin.
Pas de sons ni en user ni en root, et contrôle de volume, idem : désactivé.

Hors ligne

#10 21-11-2020 09:25:50

Anonyme-14
Invité

Re : Plus de sons.

le son est branché sur un câble hdmi ?

#11 21-11-2020 09:28:31

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Non. Ce sont les haut-parleurs qui sortent le son. Et le micro qui sert de périphérique d'entrée. C'est un portable.

Hors ligne

#12 21-11-2020 09:32:09

Anonyme-14
Invité

Re : Plus de sons.

Que donne ?

pacmd list-cards

#13 21-11-2020 09:44:08

Anonyme-14
Invité

Re : Plus de sons.

essaies également avec une musique en cours cette commande pour voir l'état.

pacmd list-sinks

#14 21-11-2020 09:44:12

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Retour :


2 card(s) available.
    index: 0
  name: <alsa_card.pci-0000_00_03.0>
  driver: <module-alsa-card.c>
  owner module: 6
  properties:
    alsa.card = "0"
    alsa.card_name = "HDA Intel HDMI"
    alsa.long_card_name = "HDA Intel HDMI at 0xc4210000 irq 53"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:03.0"
    sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.id = "160c"
    device.product.name = "Broadwell-U Audio Controller"
    device.form_factor = "internal"
    device.string = "0"
    device.description = "Audio interne"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
  profiles:
    output:hdmi-stereo: Sortie Digital Stereo (HDMI) (priority 5900, available: no)
    output:hdmi-surround: Sortie Digital Surround 5.1 (HDMI) (priority 800, available: no)
    output:hdmi-surround71: Sortie Digital Surround 7.1 (HDMI) (priority 800, available: no)
    output:hdmi-stereo-extra1: Sortie Digital Stereo (HDMI 2) (priority 5700, available: no)
    output:hdmi-surround-extra1: Sortie Digital Surround 5.1 (HDMI 2) (priority 600, available: no)
    output:hdmi-surround71-extra1: Sortie Digital Surround 7.1 (HDMI 2) (priority 600, available: no)
    output:hdmi-stereo-extra2: Sortie Digital Stereo (HDMI 3) (priority 5700, available: no)
    output:hdmi-surround-extra2: Sortie Digital Surround 5.1 (HDMI 3) (priority 600, available: no)
    output:hdmi-surround71-extra2: Sortie Digital Surround 7.1 (HDMI 3) (priority 600, available: no)
    output:hdmi-stereo-extra3: Sortie Digital Stereo (HDMI 4) (priority 5700, available: no)
    output:hdmi-surround-extra3: Sortie Digital Surround 5.1 (HDMI 4) (priority 600, available: no)
    output:hdmi-surround71-extra3: Sortie Digital Surround 7.1 (HDMI 4) (priority 600, available: no)
    output:hdmi-stereo-extra4: Sortie Digital Stereo (HDMI 5) (priority 5700, available: no)
    output:hdmi-surround-extra4: Sortie Digital Surround 5.1 (HDMI 5) (priority 600, available: no)
    output:hdmi-surround71-extra4: Sortie Digital Surround 7.1 (HDMI 5) (priority 600, available: no)
    off: Éteint (priority 0, available: unknown)
  active profile: <off>
  ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
      properties:
        device.icon_name = "video-display"
    hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
      properties:
        device.icon_name = "video-display"
    hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
      properties:
        device.icon_name = "video-display"
    hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
      properties:
        device.icon_name = "video-display"
    hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
      properties:
        device.icon_name = "video-display"
    index: 1
  name: <alsa_card.pci-0000_00_1b.0>
  driver: <module-alsa-card.c>
  owner module: 7
  properties:
    alsa.card = "1"
    alsa.card_name = "HDA Intel PCH"
    alsa.long_card_name = "HDA Intel PCH at 0xc4214000 irq 54"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:1b.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.id = "9ca0"
    device.product.name = "Wildcat Point-LP High Definition Audio Controller"
    device.form_factor = "internal"
    device.string = "1"
    device.description = "Audio interne"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
  profiles:
    input:analog-stereo: Entrée Stéréo analogique (priority 65, available: unknown)
    output:analog-stereo: Sortie Stéréo analogique (priority 6500, available: unknown)
    output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (priority 6565, available: unknown)
    off: Éteint (priority 0, available: unknown)
  active profile: <output:analog-stereo+input:analog-stereo>
  sinks:
    alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Audio interne Stéréo analogique
  sources:
    alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Audio interne Stéréo analogique
    alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Audio interne Stéréo analogique
  ports:
    analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
      properties:
        device.icon_name = "audio-input-microphone"
    analog-output-speaker: Haut-parleurs (priority 10000, latency offset 0 usec, available: unknown)
      properties:
        device.icon_name = "audio-speakers"
    analog-output-headphones: Casque audio (priority 9000, latency offset 0 usec, available: no)
      properties:
        device.icon_name = "audio-headphones"
 

Hors ligne

#15 21-11-2020 10:08:01

Anonyme-14
Invité

Re : Plus de sons.

comme indiqué précedemment et pendant qu'une musique est en cours, exemple avec Firefox sur youtube, pour voir l'état.

pacmd list-sinks


et

pacmd list-sink-inputs

#16 21-11-2020 10:17:02

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Toujours pareil.

pacmd list-sinks :


1 sink(s) available.
  * index: 0
  name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
  driver: <module-alsa-card.c>
  flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
  state: SUSPENDED
  suspend cause: IDLE
  priority: 9039
  volume: front-left: 78643 / 120% / 4,75 dB,   front-right: 78643 / 120% / 4,75 dB
          balance 0,00
  base volume: 65536 / 100% / 0,00 dB
  volume steps: 65537
  muted: yes
  current latency: 0,00 ms
  max request: 0 KiB
  max rewind: 0 KiB
  monitor source: 0
  sample spec: s16le 2ch 48000Hz
  channel map: front-left,front-right
               Stéréo
  used by: 0
  linked by: 0
  configured latency: 0,00 ms; range is 0,50 .. 1837,50 ms
  card: 1 <alsa_card.pci-0000_00_1b.0>
  module: 7
  properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "ALC283 Analog"
    alsa.id = "ALC283 Analog"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "1"
    alsa.card_name = "HDA Intel PCH"
    alsa.long_card_name = "HDA Intel PCH at 0xc4214000 irq 54"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:1b.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.id = "9ca0"
    device.product.name = "Wildcat Point-LP High Definition Audio Controller"
    device.form_factor = "internal"
    device.string = "front:1"
    device.buffering.buffer_size = "352800"
    device.buffering.fragment_size = "176400"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Stéréo analogique"
    device.description = "Audio interne Stéréo analogique"
    alsa.mixer_name = "Realtek ALC283"
    alsa.components = "HDA:10ec0283,10250940,00100003"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
  ports:
    analog-output-speaker: Haut-parleurs (priority 10000, latency offset 0 usec, available: unknown)
      properties:
        device.icon_name = "audio-speakers"
    analog-output-headphones: Casque audio (priority 9000, latency offset 0 usec, available: no)
      properties:
        device.icon_name = "audio-headphones"
  active port: <analog-output-speaker>

 



pacmd list-sink-inputs


0 sink input(s) available.

 



Peut-être une bonne réinstall bien propre ? scratchhead.gif

Dernière modification par Lupa (21-11-2020 10:24:44)

Hors ligne

#17 21-11-2020 10:24:33

Anonyme-14
Invité

Re : Plus de sons.

Je vois


state: SUSPENDED
suspend cause: IDLE
muted: yes
alsa.mixer_name = "Realtek ALC283"
 



Installer les pilotes realtek pourrait-il résoudre le problème ?

#18 21-11-2020 10:33:19

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Je le fais et donne le retour . Merci wink
Ca ne change rien.
MAIS : le firmware Realtek ALC283 : non trouvé.
Trouvé et installé celui-ci : firmware-realtek_20200918-1~bpo10+1_all.deb

Dernière modification par Lupa (21-11-2020 10:42:51)

Hors ligne

#19 21-11-2020 11:18:43

Anonyme-14
Invité

Re : Plus de sons.

ok, désinstalles le, un coup pour rien.

systemctl --user enable pulseaudio && systemctl --user start pulseaudio



est-ce que cette commande retourne une erreur ? Si oui ou non, redémarres l'ordi quand même et relances la même commande.

#20 21-11-2020 11:29:50

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Déjà saisie depuis le début, mais j'en suis plus là wink
La commande ne retourne aucune erreur.
Je désinstalle le paquet realtek quand-même.
Saisi la commande à nouveau après désinstallation de Realtek.
Rien de changé.

Hors ligne

#21 21-11-2020 11:39:28

Anonyme-14
Invité

Re : Plus de sons.

une autre possibilité est de lancer pulseaudio pour le système entier puis de tuer la bête.

ps ax | grep pulse


sudo killall pulseaudio



tu peux aussi supprimer les réglages utilisateur, je ne sais pas si cela va résoudre mais cela va régénérer un nouveau fichier config quand pulseaudio va redémarrer.

rm -rf /tmp/pulse* ~/.pulse* ~/.config/pulse


pulseaudio -k


pulseaudio --start



dis donc dis donc c'est embêtant de ne pas avoir de son...

Dernière modification par Anonyme-14 (21-11-2020 11:54:41)

#22 21-11-2020 12:17:45

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Les sons sont revenus !

Réponses :


root@DEB-KOR:~# ps ax | grep pulse
 2441 ?        S<l    0:00 /bin/pulseaudio
 2973 pts/0    S+     0:00 grep pulse

 




Répertoire vide :
/tmp/pulse-PKdhtXMmr18n


root@DEB-KOR:~# killall pulseudio
pulseudio: aucun processus trouvé

J'ai saisi (en user) -k et --start
Puis lancé la lecture d'une vidéo, de même sur Youtube, et ça a remarché.

Je tente un dmesg pour que tu puisses voir si tout est correct.


[    0.086619] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    5.365142] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    5.365280] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    5.999416] r8169 0000:02:00.1: firmware: failed to load rtl_nic/rtl8411-2.fw (-2)
[    6.000542] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[    6.001260] r8169 0000:02:00.1: Direct firmware load for rtl_nic/rtl8411-2.fw failed with error -2
[    6.001276] r8169 0000:02:00.1: Unable to load firmware rtl_nic/rtl8411-2.fw (-2)

 




Le complet (ç'est long !)


[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-11-12
[    0.000000] Linux version 5.8.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc-8 (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Debian 5.8.10-1~bpo10+1 (2020-09-26)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-0.bpo.2-amd64 root=UUID=52be145a-4735-4fda-9572-fa4dfc525cf9 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096eb9fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000096eba000-0x00000000977b9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000977ba000-0x000000009c8cefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c8cf000-0x000000009cdbefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cdbf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire E5-571G/EA50_HB   , BIOS V1.26 12/18/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.788 MHz processor
[    0.000833] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000834] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000841] last_pfn = 0x15f000 max_arch_pfn = 0x400000000
[    0.000845] MTRR default type: uncachable
[    0.000846] MTRR fixed ranges enabled:
[    0.000847]   00000-9FFFF write-back
[    0.000848]   A0000-BFFFF uncachable
[    0.000849]   C0000-E7FFF write-protect
[    0.000850]   E8000-EFFFF write-combining
[    0.000850]   F0000-FFFFF write-protect
[    0.000851] MTRR variable ranges enabled:
[    0.000853]   0 base 0000000000 mask 7F80000000 write-back
[    0.000854]   1 base 0080000000 mask 7FE0000000 write-back
[    0.000854]   2 base 009D000000 mask 7FFF000000 uncachable
[    0.000855]   3 base 009E000000 mask 7FFE000000 uncachable
[    0.000856]   4 base 00FFA00000 mask 7FFFE00000 write-protect
[    0.000857]   5 base 00FFC00000 mask 7FFFC00000 write-protect
[    0.000858]   6 base 0100000000 mask 7F80000000 write-back
[    0.000859]   7 base 015F000000 mask 7FFF000000 uncachable
[    0.000859]   8 base 0160000000 mask 7FE0000000 uncachable
[    0.000860]   9 disabled
[    0.001181] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001309] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.010454] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[    0.010802] Using GB pages for direct mapping
[    0.011076] RAMDISK: [mem 0x32823000-0x35408fff]
[    0.011082] ACPI: Early table checksum verification disabled
[    0.011084] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.011088] ACPI: XSDT 0x000000009CFC5188 0000DC (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.011093] ACPI: FACP 0x000000009CFF2000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011098] ACPI: DSDT 0x000000009CFD8000 013AD4 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.011101] ACPI: FACS 0x000000009CFB8000 000040
[    0.011103] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011105] ACPI: UEFI 0x000000009CFFC000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.011108] ACPI: SSDT 0x000000009CFF8000 003E78 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.011111] ACPI: MSDM 0x000000009CFF7000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011113] ACPI: ASF! 0x000000009CFF6000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011116] ACPI: ASPT 0x000000009CFF5000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011118] ACPI: BOOT 0x000000009CFF4000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011121] ACPI: DBGP 0x000000009CFF3000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011124] ACPI: HPET 0x000000009CFF1000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011126] ACPI: LPIT 0x000000009CFF0000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.011129] ACPI: APIC 0x000000009CFEF000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011131] ACPI: MCFG 0x000000009CFEE000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011134] ACPI: WDAT 0x000000009CFED000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011137] ACPI: SSDT 0x000000009CFD4000 00342F (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.011139] ACPI: SSDT 0x000000009CFEC000 000BD3 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.011142] ACPI: SSDT 0x000000009CFD3000 000539 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.011144] ACPI: SSDT 0x000000009CFD2000 000B74 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.011147] ACPI: SSDT 0x000000009CFCB000 006264 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.011150] ACPI: SSDT 0x000000009CFC7000 00361B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.011152] ACPI: DMAR 0x000000009CFC6000 0000D4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011155] ACPI: CSRT 0x000000009CFC4000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.011158] ACPI: FPDT 0x000000009CFC3000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.011165] ACPI: Local APIC address 0xfee00000
[    0.011249] No NUMA configuration found
[    0.011250] Faking a node at [mem 0x0000000000000000-0x000000015effffff]
[    0.011254] NODE_DATA(0) allocated [mem 0x15eff9000-0x15effdfff]
[    0.011278] Zone ranges:
[    0.011278]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011280]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011281]   Normal   [mem 0x0000000100000000-0x000000015effffff]
[    0.011281]   Device   empty
[    0.011282] Movable zone start for each node
[    0.011283] Early memory node ranges
[    0.011284]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.011285]   node   0: [mem 0x0000000000100000-0x0000000096eb9fff]
[    0.011286]   node   0: [mem 0x00000000977ba000-0x000000009c8cefff]
[    0.011287]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.011287]   node   0: [mem 0x0000000100000000-0x000000015effffff]
[    0.011493] Zeroed struct page in unavailable ranges: 20627 pages
[    0.011494] Initmem setup node 0 [mem 0x0000000000001000-0x000000015effffff]
[    0.011496] On node 0 totalpages: 1027949
[    0.011497]   DMA zone: 64 pages used for memmap
[    0.011497]   DMA zone: 21 pages reserved
[    0.011498]   DMA zone: 3997 pages, LIFO batch:0
[    0.011551]   DMA32 zone: 9920 pages used for memmap
[    0.011552]   DMA32 zone: 634832 pages, LIFO batch:63
[    0.020345]   Normal zone: 6080 pages used for memmap
[    0.020347]   Normal zone: 389120 pages, LIFO batch:63
[    0.020820] Reserving Intel graphics memory at [mem 0x9e000000-0x9fffffff]
[    0.020891] ACPI: PM-Timer IO Port: 0x1808
[    0.020893] ACPI: Local APIC address 0xfee00000
[    0.020910] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.020912] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.020913] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.020914] ACPI: IRQ0 used by override.
[    0.020915] ACPI: IRQ9 used by override.
[    0.020917] Using ACPI (MADT) for SMP configuration information
[    0.020919] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.020922] TSC deadline timer available
[    0.020923] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.020942] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.020944] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.020944] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.020945] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.020945] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.020947] PM: hibernation: Registered nosave memory: [mem 0x96eba000-0x977b9fff]
[    0.020949] PM: hibernation: Registered nosave memory: [mem 0x9c8cf000-0x9cdbefff]
[    0.020949] PM: hibernation: Registered nosave memory: [mem 0x9cdbf000-0x9cfbefff]
[    0.020950] PM: hibernation: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[    0.020951] PM: hibernation: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
[    0.020952] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.020952] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.020953] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.020954] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.020954] PM: hibernation: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.020955] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.020955] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.020956] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.020956] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.020957] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.020958] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.020958] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.020959] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.020959] PM: hibernation: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.020961] [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.020962] Booting paravirtualized kernel on bare hardware
[    0.020965] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.025976] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.026288] percpu: Embedded 55 pages/cpu s184856 r8192 d32232 u524288
[    0.026294] pcpu-alloc: s184856 r8192 d32232 u524288 alloc=1*2097152
[    0.026295] pcpu-alloc: [0] 0 1 2 3
[    0.026320] Built 1 zonelists, mobility grouping on.  Total pages: 1011864
[    0.026321] Policy zone: Normal
[    0.026322] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-0.bpo.2-amd64 root=UUID=52be145a-4735-4fda-9572-fa4dfc525cf9 ro quiet
[    0.026732] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.026914] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.026963] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.044760] Memory: 2549140K/4111796K available (12291K kernel code, 1292K rwdata, 4060K rodata, 1632K init, 1864K bss, 210288K reserved, 0K cma-reserved)
[    0.044769] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
[    0.044912] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.044927] Kernel/User page tables isolation: enabled
[    0.044943] ftrace: allocating 35332 entries in 139 pages
[    0.059602] ftrace: allocated 139 pages with 4 groups
[    0.059725] rcu: Hierarchical RCU implementation.
[    0.059726] rcu:   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.059727]  Rude variant of Tasks RCU enabled.
[    0.059728] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.059729] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.063677] NR_IRQS: 33024, nr_irqs: 728, preallocated irqs: 16
[    0.063995] random: crng done (trusting CPU's manufacturer)
[    0.065921] Console: colour VGA+ 80x25
[    0.065925] printk: console [tty0] enabled
[    0.065944] ACPI: Core revision 20200528
[    0.066166] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.066177] APIC: Switch to symmetric I/O mode setup
[    0.066179] DMAR: Host address width 39
[    0.066180] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.066185] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.066186] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.066189] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.066190] DMAR: RMRR base: 0x0000009cd65000 end: 0x0000009cd84fff
[    0.066192] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.066193] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.066195] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.066195] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.066196] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.066197] DMAR-IR: Use '
intremap=no_x2apic_optout' to override the BIOS setting.
[    0.066877] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.066878] x2apic: IRQ remapping doesn'
t support X2APIC mode
[    0.067503] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.086180] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa2f755c52, max_idle_ns: 440795303691 ns
[    0.086185] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.57 BogoMIPS (lpj=8779152)
[    0.086187] pid_max: default: 32768 minimum: 301
[    0.086222] LSM: Security Framework initializing
[    0.086228] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.086256] AppArmor: AppArmor initialized
[    0.086257] TOMOYO Linux initialized
[    0.086286] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.086298] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.086598] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.086611] process: using mwait in idle threads
[    0.086614] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.086615] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.086617] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.086618] Spectre V2 : Mitigation: Full generic retpoline
[    0.086619] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.086619] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.086621] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.086621] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.086622] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.086626] SRBDS: Mitigation: Microcode
[    0.086626] MDS: Mitigation: Clear CPU buffers
[    0.086831] Freeing SMP alternatives memory: 32K
[    0.090267] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.090416] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.090433] ... version:                3
[    0.090434] ... bit width:              48
[    0.090435] ... generic registers:      4
[    0.090435] ... value mask:             0000ffffffffffff
[    0.090436] ... max period:             00007fffffffffff
[    0.090436] ... fixed-purpose events:   3
[    0.090437] ... event mask:             000000070000000f
[    0.090476] rcu: Hierarchical SRCU implementation.
[    0.091181] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.091239] smp: Bringing up secondary CPUs ...
[    0.091329] x86: Booting SMP configuration:
[    0.091330] .... node  #0, CPUs:      #1 #2
[    0.094283] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.094307]  #3
[    0.094684] smp: Brought up 1 node, 4 CPUs
[    0.094684] smpboot: Max logical packages: 1
[    0.094684] smpboot: Total of 4 processors activated (17558.30 BogoMIPS)
[    0.101462] node 0 deferred pages initialised in 4ms
[    0.101467] devtmpfs: initialized
[    0.101467] x86/mm: Memory block size: 128MB
[    0.102224] PM: Registering ACPI NVS region [mem 0x9cdbf000-0x9cfbefff] (2097152 bytes)
[    0.102289] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.102289] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.102289] pinctrl core: initialized pinctrl subsystem
[    0.102355] thermal_sys: Registered thermal governor 'fair_share'
[    0.102356] thermal_sys: Registered thermal governor 'bang_bang'
[    0.102357] thermal_sys: Registered thermal governor 'step_wise'
[    0.102358] thermal_sys: Registered thermal governor 'user_space'
[    0.102483] NET: Registered protocol family 16
[    0.102564] audit: initializing netlink subsys (disabled)
[    0.102574] audit: type=2000 audit(1605957238.036:1): state=initialized audit_enabled=0 res=1
[    0.102574] cpuidle: using governor ladder
[    0.102574] cpuidle: using governor menu
[    0.102574] Simple Boot Flag at 0x44 set to 0x1
[    0.102574] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.102574] ACPI: bus type PCI registered
[    0.102574] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.102574] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.102574] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.102574] PCI: Using configuration type 1 for base access
[    0.102574] ENERGY_PERF_BIAS: Set to '
normal', was 'performance'
[    0.102574] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.102574] mtrr: probably your BIOS does not setup all CPUs.
[    0.102574] mtrr: corrected configuration.
[    0.103184] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.103184] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.274308] ACPI: Added _OSI(Module Device)
[    0.274308] ACPI: Added _OSI(Processor Device)
[    0.274308] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.274308] ACPI: Added _OSI(Processor Aggregator Device)
[    0.274308] ACPI: Added _OSI(Linux-Dell-Video)
[    0.274308] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.274308] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.289561] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.294696] ACPI: Dynamic OEM Table Load:
[    0.294705] ACPI: SSDT 0xFFFF88F58773C400 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.295921] ACPI: Dynamic OEM Table Load:
[    0.295928] ACPI: SSDT 0xFFFF88F5875B9000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.297123] ACPI: Dynamic OEM Table Load:
[    0.297129] ACPI: SSDT 0xFFFF88F587686800 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.299138] ACPI: EC: EC started
[    0.299139] ACPI: EC: interrupt blocked
[    0.299480] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.299482] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.299483] ACPI: Interpreter enabled
[    0.299523] ACPI: (supports S0 S3 S4 S5)
[    0.299524] ACPI: Using IOAPIC for interrupt routing
[    0.299558] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.300169] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    0.300182] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.312097] ACPI: Power Resource [PC05] (on)
[    0.314776] ACPI: Power Resource [FN00] (off)
[    0.314849] ACPI: Power Resource [FN01] (off)
[    0.314917] ACPI: Power Resource [FN02] (off)
[    0.314988] ACPI: Power Resource [FN03] (off)
[    0.315055] ACPI: Power Resource [FN04] (off)
[    0.315956] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.315962] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.316838] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.316839] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.317693] PCI host bridge to bus 0000:00
[    0.317695] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.317696] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.317698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.317699] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[    0.317700] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.317710] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.318003] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.318015] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
[    0.318021] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.318026] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.318039] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[    0.318327] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.318337] pci 0000:00:03.0: reg 0x10: [mem 0xc4210000-0xc4213fff 64bit]
[    0.318657] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.318676] pci 0000:00:14.0: reg 0x10: [mem 0xc4200000-0xc420ffff 64bit]
[    0.318733] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.319011] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.319033] pci 0000:00:16.0: reg 0x10: [mem 0xc4219000-0xc421901f 64bit]
[    0.319100] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.319397] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.319417] pci 0000:00:1b.0: reg 0x10: [mem 0xc4214000-0xc4217fff 64bit]
[    0.319474] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.319760] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.320060] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.320079] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.320081] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.320399] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.320480] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.320498] pci 0000:00:1c.2: Enabling MPC IRBNCE
[    0.320499] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[    0.320806] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.320884] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.320901] pci 0000:00:1c.3: Enabling MPC IRBNCE
[    0.320903] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[    0.321208] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.321285] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.321302] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    0.321304] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    0.321614] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.326575] pci 0000:00:1d.0: reg 0x10: [mem 0xc421d000-0xc421d3ff]
[    0.328165] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.328451] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.328834] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.328849] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.328855] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.328861] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.328867] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.328873] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.328880] pci 0000:00:1f.2: reg 0x24: [mem 0xc421c000-0xc421c7ff]
[    0.328913] pci 0000:00:1f.2: PME# supported from D3hot
[    0.329187] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.329203] pci 0000:00:1f.3: reg 0x10: [mem 0xc4218000-0xc42180ff 64bit]
[    0.329221] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.329513] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.329546] pci 0000:00:1f.6: reg 0x10: [mem 0xc421b000-0xc421bfff 64bit]
[    0.329949] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.330011] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
[    0.330041] pci 0000:02:00.0: reg 0x10: [mem 0xc4105000-0xc4105fff]
[    0.330102] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.330196] pci 0000:02:00.0: supports D1 D2
[    0.330197] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.330349] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
[    0.330378] pci 0000:02:00.1: reg 0x10: [io  0x4000-0x40ff]
[    0.330405] pci 0000:02:00.1: reg 0x18: [mem 0xc4104000-0xc4104fff 64bit]
[    0.330422] pci 0000:02:00.1: reg 0x20: [mem 0xc4100000-0xc4103fff 64bit]
[    0.330523] pci 0000:02:00.1: supports D1 D2
[    0.330524] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.330669] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.330671] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.330674] pci 0000:00:1c.2:   bridge window [mem 0xc4100000-0xc41fffff]
[    0.330730] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[    0.330762] pci 0000:03:00.0: reg 0x10: [mem 0xc4000000-0xc407ffff 64bit]
[    0.330813] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.330887] pci 0000:03:00.0: supports D1 D2
[    0.330888] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.331030] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.331034] pci 0000:00:1c.3:   bridge window [mem 0xc4000000-0xc40fffff]
[    0.331091] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
[    0.331117] pci 0000:04:00.0: reg 0x10: [mem 0xc3000000-0xc3ffffff]
[    0.331132] pci 0000:04:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.331147] pci 0000:04:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.331157] pci 0000:04:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.331167] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.331186] pci 0000:04:00.0: Enabling HDA controller
[    0.331279] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link)
[    0.331374] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.331376] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.331379] pci 0000:00:1c.4:   bridge window [mem 0xc3000000-0xc3ffffff]
[    0.331383] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.396441] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.396490] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.396537] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.396585] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.396632] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.396679] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.396727] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.396777] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.397193] ACPI: EC: interrupt unblocked
[    0.397194] ACPI: EC: event unblocked
[    0.397203] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.397204] ACPI: EC: GPE=0x27
[    0.397207] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.397208] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.397279] iommu: Default domain type: Translated
[    0.397294] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.397294] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.397294] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.397294] vgaarb: loaded
[    0.587443] EDAC MC: Ver: 3.0.0
[    0.587515] NetLabel: Initializing
[    0.587515] NetLabel:  domain hash size = 128
[    0.587515] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.587515] NetLabel:  unlabeled traffic allowed by default
[    0.587515] PCI: Using ACPI for IRQ routing
[    0.589125] PCI: pci_cache_line_size set to 64 bytes
[    0.589172] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.589173] e820: reserve RAM buffer [mem 0x96eba000-0x97ffffff]
[    0.589174] e820: reserve RAM buffer [mem 0x9c8cf000-0x9fffffff]
[    0.589175] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.589176] e820: reserve RAM buffer [mem 0x15f000000-0x15fffffff]
[    0.589735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.589740] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.595207] clocksource: Switched to clocksource tsc-early
[    0.605843] VFS: Disk quotas dquot_6.6.0
[    0.605862] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.605993] AppArmor: AppArmor Filesystem Enabled
[    0.606012] pnp: PnP ACPI init
[    0.606255] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.606257] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.606258] system 00:00: [io  0xffff] has been reserved
[    0.606260] system 00:00: [io  0xffff] has been reserved
[    0.606261] system 00:00: [io  0xffff] has been reserved
[    0.606262] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.606263] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.606269] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.606322] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.606368] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.606372] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.606399] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.678755] system 00:04: [mem 0xfe102000-0xfe102fff] has been reserved
[    0.678757] system 00:04: [mem 0xfe104000-0xfe104fff] has been reserved
[    0.678759] system 00:04: [mem 0xfe106000-0xfe106fff] has been reserved
[    0.678762] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.679645] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.679646] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.679648] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.679649] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.679650] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.679652] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.679653] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.679654] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.679656] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.679657] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.679658] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.679660] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.679663] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.679877] pnp: PnP ACPI: found 6 devices
[    0.685640] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.685702] NET: Registered protocol family 2
[    0.685847] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.685880] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.685968] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.686054] TCP: Hash tables configured (established 32768 bind 32768)
[    0.686097] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.686112] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.686156] NET: Registered protocol family 1
[    0.686161] NET: Registered protocol family 44
[    0.686165] pci 0000:02:00.0: can'
t claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.686167] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.686168] pci 0000:04:00.0: can'
t claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.686173] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.686175] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.686176] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.686189] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[    0.686194] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.686197] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.686199] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.686201] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.686205] pci 0000:00:1c.0:   bridge window [mem 0xa0100000-0xa02fffff]
[    0.686208] pci 0000:00:1c.0:   bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.686214] pci 0000:02:00.0: BAR 6: assigned [mem 0xc4110000-0xc411ffff pref]
[    0.686215] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.686217] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.686220] pci 0000:00:1c.2:   bridge window [mem 0xc4100000-0xc41fffff]
[    0.686227] pci 0000:03:00.0: BAR 6: assigned [mem 0xc4080000-0xc408ffff pref]
[    0.686228] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.686231] pci 0000:00:1c.3:   bridge window [mem 0xc4000000-0xc40fffff]
[    0.686238] pci 0000:04:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.686240] pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.686241] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.686242] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.686246] pci 0000:00:1c.4:   bridge window [mem 0xc3000000-0xc3ffffff]
[    0.686248] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.686254] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.686255] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.686256] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.686257] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
[    0.686259] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.686260] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[    0.686261] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.686262] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.686263] pci_bus 0000:02: resource 1 [mem 0xc4100000-0xc41fffff]
[    0.686264] pci_bus 0000:03: resource 1 [mem 0xc4000000-0xc40fffff]
[    0.686265] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.686266] pci_bus 0000:04: resource 1 [mem 0xc3000000-0xc3ffffff]
[    0.686267] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.686390] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.686475] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.686476] pci 0000:00:14.0: PCI INT A: no GSI
[    0.710293] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x643 took 19287 usecs
[    0.710322] PCI: CLS 64 bytes, default 64
[    0.710368] Trying to unpack rootfs image as initramfs...
[    1.466396] Freeing initrd memory: 44952K
[    1.466550] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[    1.466563] DMAR: No ATSR found
[    1.466605] DMAR: dmar1: Using Queued invalidation
[    1.466670] pci 0000:00:00.0: Adding to iommu group 0
[    1.466681] pci 0000:00:03.0: Adding to iommu group 1
[    1.466691] pci 0000:00:14.0: Adding to iommu group 2
[    1.466706] pci 0000:00:16.0: Adding to iommu group 3
[    1.466715] pci 0000:00:1b.0: Adding to iommu group 4
[    1.466725] pci 0000:00:1c.0: Adding to iommu group 5
[    1.466735] pci 0000:00:1c.2: Adding to iommu group 6
[    1.466745] pci 0000:00:1c.3: Adding to iommu group 7
[    1.466754] pci 0000:00:1c.4: Adding to iommu group 8
[    1.466764] pci 0000:00:1d.0: Adding to iommu group 9
[    1.466789] pci 0000:00:1f.0: Adding to iommu group 10
[    1.466799] pci 0000:00:1f.2: Adding to iommu group 10
[    1.466810] pci 0000:00:1f.3: Adding to iommu group 10
[    1.466819] pci 0000:00:1f.6: Adding to iommu group 10
[    1.466848] pci 0000:02:00.0: Adding to iommu group 11
[    1.466869] pci 0000:02:00.1: Adding to iommu group 11
[    1.466878] pci 0000:03:00.0: Adding to iommu group 12
[    1.466889] pci 0000:04:00.0: Adding to iommu group 13
[    1.469262] platform INTL9C60:00: Adding to iommu group 14
[    1.469315] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.469316] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.469318] software IO TLB: mapped [mem 0x988cf000-0x9c8cf000] (64MB)
[    1.469754] Initialise system trusted keyrings
[    1.469767] Key type blacklist registered
[    1.469818] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.471055] zbud: loaded
[    1.471215] integrity: Platform Keyring initialized
[    1.471217] Key type asymmetric registered
[    1.471218] Asymmetric key parser '
x509' registered
[    1.471225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.471276] io scheduler mq-deadline registered
[    1.471610] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[    1.471636] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    1.471882] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
[    1.472060] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
[    1.472222] pcieport 0000:00:1c.4: PME: Signaling with IRQ 45
[    1.472305] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.472324] intel_idle: MWAIT substates: 0x11142120
[    1.472324] intel_idle: v0.5.1 model 0x3D
[    1.472557] intel_idle: Local APIC timer is reliable in all C-states
[    1.472999] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200528/psargs-330)
[    1.473066] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20200528/psparse-531)
[    1.473214] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200528/psargs-330)
[    1.473276] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20200528/psparse-531)
[    1.473380] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200528/psargs-330)
[    1.473442] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20200528/psparse-531)
[    1.473537] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200528/psargs-330)
[    1.473599] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20200528/psparse-531)
[    1.473804] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.474264] Linux agpgart interface v0.103
[    1.474301] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.474301] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.474595] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[    1.474596] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.480154] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.480421] mousedev: PS/2 mouse device common for all mice
[    1.480462] rtc_cmos 00:01: RTC can wake from S4
[    1.480674] rtc_cmos 00:01: registered as rtc0
[    1.480719] rtc_cmos 00:01: setting system clock to 2020-11-21T11:13:59 UTC (1605957239)
[    1.480739] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.480750] intel_pstate: Intel P-state driver initializing
[    1.480941] ledtrig-cpu: registered to indicate activity on CPUs
[    1.481216] NET: Registered protocol family 10
[    1.488189] Segment Routing with IPv6
[    1.488213] mip6: Mobile IPv6
[    1.488216] NET: Registered protocol family 17
[    1.488256] mpls_gso: MPLS GSO support
[    1.488460] microcode: sig=0x306d4, pf=0x40, revision=0x2f
[    1.488475] microcode: Microcode Update Driver: v2.2.
[    1.488479] IPI shorthand broadcast: enabled
[    1.488486] sched_clock: Marking stable (1486116906, 2296474)->(1499871057, -11457677)
[    1.488565] registered taskstats version 1
[    1.488567] Loading compiled-in X.509 certificates
[    1.490757] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.523233] Loaded X.509 cert '
Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.523252] Loaded X.509 cert '
Debian Secure Boot Signer 2020: 00b55eb3b9'
[    1.523274] zswap: loaded using pool lzo/zbud
[    1.523412] Key type ._fscrypt registered
[    1.523413] Key type .fscrypt registered
[    1.523413] Key type fscrypt-provisioning registered
[    1.523459] AppArmor: AppArmor sha1 policy hashing enabled
[    1.524892] Freeing unused kernel image (initmem) memory: 1632K
[    1.550301] Write protecting the kernel read-only data: 18432k
[    1.551457] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    1.551630] Freeing unused kernel image (rodata/data gap) memory: 36K
[    1.729224] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.729227] x86/mm: Checking user space page tables
[    1.884009] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.884035] Run /init as init process
[    1.884048]   with arguments:
[    1.884049]     /init
[    1.884050]   with environment:
[    1.884051]     HOME=/
[    1.884051]     TERM=linux
[    1.884052]     BOOT_IMAGE=/boot/vmlinuz-5.8.0-0.bpo.2-amd64
[    1.954308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input1
[    1.954337] ACPI: Lid Switch [LID0]
[    1.954424] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.954447] ACPI: Sleep Button [SLPB]
[    1.954497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.954536] ACPI: Power Button [PWRF]
[    1.962285] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[    1.962288] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[    1.962290] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[    1.962292] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[    1.963401] hid: raw HID events driver (C) Jiri Kosina
[    1.982390] i2c_hid i2c-SYN1B7E:01: supply vdd not found, using dummy regulator
[    1.982409] i2c_hid i2c-SYN1B7E:01: supply vddl not found, using dummy regulator
[    1.987695] ACPI: bus type USB registered
[    1.987713] usbcore: registered new interface driver usbfs
[    1.987719] usbcore: registered new interface driver hub
[    1.987742] usbcore: registered new device driver usb
[    2.002342] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    2.009798] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    2.018614] ehci_hcd: USB 2.0 '
Enhanced' Host Controller (EHCI) Driver
[    2.019683] ehci-pci: EHCI PCI platform driver
[    2.027921] SCSI subsystem initialized
[    2.029184] r8169 0000:02:00.1: can'
t disable ASPM; OS doesn't have ASPM control
[    2.034167] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.034175] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    2.034199] ehci-pci 0000:00:1d.0: debug port 2
[    2.038140] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.038161] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc421d000
[    2.038288] xhci_hcd 0000:00:14.0: can'
t derive routing for PCI INT A
[    2.038289] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    2.038943] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.038970] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.038972] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    2.040274] i2c i2c-2: 1/2 memory slots populated (from DMI)
[    2.042315] i2c i2c-2: Successfully instantiated SPD at 0x50
[    2.050224] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.050410] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    2.050412] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.050414] usb usb1: Product: EHCI Host Controller
[    2.050415] usb usb1: Manufacturer: Linux 5.8.0-0.bpo.2-amd64 ehci_hcd
[    2.050417] usb usb1: SerialNumber: 0000:00:1d.0
[    2.050567] hub 1-0:1.0: USB hub found
[    2.050575] hub 1-0:1.0: 2 ports detected
[    2.050880] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.050890] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.051976] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    2.051981] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.052178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    2.052180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.052182] usb usb2: Product: xHCI Host Controller
[    2.052183] usb usb2: Manufacturer: Linux 5.8.0-0.bpo.2-amd64 xhci-hcd
[    2.052185] usb usb2: SerialNumber: 0000:00:14.0
[    2.052321] hub 2-0:1.0: USB hub found
[    2.052335] hub 2-0:1.0: 11 ports detected
[    2.057893] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.057898] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.057902] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.057951] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[    2.057953] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.057955] usb usb3: Product: xHCI Host Controller
[    2.057956] usb usb3: Manufacturer: Linux 5.8.0-0.bpo.2-amd64 xhci-hcd
[    2.057958] usb usb3: SerialNumber: 0000:00:14.0
[    2.058092] hub 3-0:1.0: USB hub found
[    2.058101] hub 3-0:1.0: 4 ports detected
[    2.065047] libata version 3.00 loaded.
[    2.071621] ahci 0000:00:1f.2: version 3.0
[    2.071816] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.074229] libphy: r8169: probed
[    2.074426] r8169 0000:02:00.1 eth0: RTL8411b, f0:76:1c:84:91:36, XID 5c8, IRQ 48
[    2.074428] r8169 0000:02:00.1 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    2.085863] r8169 0000:02:00.1 enp2s0f1: renamed from eth0
[    2.086712] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    2.086716] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part deso sadm sds apst
[    2.087685] scsi host0: ahci
[    2.092739] scsi host1: ahci
[    2.093087] scsi host2: ahci
[    2.098203] scsi host3: ahci
[    2.098280] ata1: SATA max UDMA/133 abar m2048@0xc421c000 port 0xc421c100 irq 49
[    2.098282] ata2: SATA max UDMA/133 abar m2048@0xc421c000 port 0xc421c180 irq 49
[    2.098283] ata3: DUMMY
[    2.098284] ata4: DUMMY
[    2.134385] battery: [Firmware Bug]: battery: (dis)charge rate invalid.
[    2.134567] battery: ACPI: Battery Slot [BAT1] (battery present)
[    2.159548] ACPI Warning: \_SB.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-66)
[    2.159776] pci 0000:04:00.0: optimus capabilities: enabled, status dynamic power,
[    2.159777] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PXSX handle
[    2.159804] nouveau 0000:04:00.0: enabling device (0106 -> 0107)
[    2.159950] nouveau 0000:04:00.0: NVIDIA GF117 (0d7000a2)
[    2.211668] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.212949] Console: switching to colour dummy device 80x25
[    2.213095] [drm] ACPI BIOS requests an excessive sleep of 10000 ms, using 1500 ms instead
[    2.222065] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.223476] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.224793] nouveau 0000:04:00.0: bios: version 75.17.86.00.2a
[    2.307799] nouveau 0000:04:00.0: fb: 2048 MiB DDR3
[    2.308185] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
[    2.321527] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.322219] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.322321] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[    2.322333] ACPI: Video Device [PXSX] (multi-head: yes  rom: yes  post: no)
[    2.322382] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:52/LNXVIDEO:01/input/input5
[    2.390236] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.406227] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[    2.412844] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.414778] ata1.00: supports DRM functions and may not be fully accessible
[    2.415634] ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
[    2.415635] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.418020] ata1.00: supports DRM functions and may not be fully accessible
[    2.420835] ata1.00: configured for UDMA/133
[    2.430914] ahci 0000:00:1f.2: port does not support device sleep
[    2.431095] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    2.498226] tsc: Refined TSC clocksource calibration: 2194.920 MHz
[    2.498231] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa373f688b, max_idle_ns: 440795233648 ns
[    2.502278] clocksource: Switched to clocksource tsc
[    2.520887] fbcon: i915drmfb (fb0) is primary device
[    2.562636] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[    2.562637] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.562964] hub 1-1:1.0: USB hub found
[    2.563134] hub 1-1:1.0: 8 ports detected
[    2.591419] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    2.591421] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.591422] usb 2-2: Product: USB2.0 Hub
[    2.592584] hub 2-2:1.0: USB hub found
[    2.592854] hub 2-2:1.0: 4 ports detected
[    2.726239] usb 2-5: new full-speed USB device number 3 using xhci_hcd
[    2.744908] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.747878] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
[    2.750297] ata2.00: configured for UDMA/100
[    2.754509] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8HC    1.00 PQ: 0 ANSI: 5
[    2.935519] usb 2-5: string descriptor 0 read error: -22
[    2.935522] usb 2-5: New USB device found, idVendor=0489, idProduct=e04e, bcdDevice= 0.02
[    2.935523] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.014225] usb 2-2.2: new high-speed USB device number 4 using xhci_hcd
[    3.123846] usb 2-2.2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
[    3.123847] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.123848] usb 2-2.2: Product: DataTraveler 3.0
[    3.123849] usb 2-2.2: Manufacturer: Kingston
[    3.123850] usb 2-2.2: SerialNumber: E0D55EA573F5F42049B24025
[    3.129832] usb-storage 2-2.2:1.0: USB Mass Storage device detected
[    3.129965] scsi host4: usb-storage 2-2.2:1.0
[    3.130062] usbcore: registered new interface driver usb-storage
[    3.131402] input: SYN1B7E:01 06CB:2970 Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input6
[    3.131731] input: SYN1B7E:01 06CB:2970 Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input7
[    3.131812] hid-generic 0018:06CB:2970.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7E:01 06CB:2970] on i2c-SYN1B7E:01
[    3.131859] usbcore: registered new interface driver uas
[    3.242222] usb 2-7: new high-speed USB device number 5 using xhci_hcd
[    3.448029] usb 2-7: New USB device found, idVendor=04f2, idProduct=b452, bcdDevice=29.69
[    3.448030] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.448031] usb 2-7: Product: HD WebCam
[    3.448032] usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd.
[    3.448033] usb 2-7: SerialNumber: 0001
[    3.470219] usb 2-2.3: new low-speed USB device number 6 using xhci_hcd
[    3.568547] Console: switching to colour frame buffer device 170x48
[    3.590764] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.593239] usb 2-2.3: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30
[    3.593240] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.593241] usb 2-2.3: Product: HP Basic USB Keyboard
[    3.593242] usb 2-2.3: Manufacturer: CHICONY
[    3.606743] vga_switcheroo: enabled
[    3.606909] [TTM] Zone  kernel: Available graphics memory: 1975102 KiB
[    3.606909] [TTM] Initializing pool allocator
[    3.606923] [TTM] Initializing DMA pool allocator
[    3.606940] nouveau 0000:04:00.0: DRM: VRAM: 2048 MiB
[    3.606941] nouveau 0000:04:00.0: DRM: GART: 1048576 MiB
[    3.606943] nouveau 0000:04:00.0: DRM: Pointer to TMDS table not found
[    3.606944] nouveau 0000:04:00.0: DRM: DCB version 4.0
[    3.608019] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:03F0:0024.0002/input/input9
[    3.608540] nouveau 0000:04:00.0: DRM: MM: using COPY0 for buffer copies
[    3.608912] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 1
[    3.626780] ata1.00: Enabling discard_zeroes_data
[    3.626838] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.626847] sd 0:0:0:0: [sda] Write Protect is off
[    3.626849] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.626866] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.642476] ata1.00: Enabling discard_zeroes_data
[    3.645531]  sda: sda1 sda2 < sda5 >
[    3.645952] ata1.00: Enabling discard_zeroes_data
[    3.647130] sd 0:0:0:0: [sda] supports TCG Opal
[    3.647132] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.657688] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.657690] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.666607] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-2.3/input0
[    3.666730] usbcore: registered new interface driver usbhid
[    3.666733] usbhid: USB HID core driver
[    3.671158] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.674248] usb 2-2.4: new low-speed USB device number 7 using xhci_hcd
[    3.779195] usb 2-2.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    3.779198] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.779199] usb 2-2.4: Product: USB Optical Mouse
[    3.779200] usb 2-2.4: Manufacturer: Logitech
[    3.783607] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.4/2-2.4:1.0/0003:046D:C077.0003/input/input10
[    3.783698] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2.4/input0
[    4.080879] process '
/usr/bin/fstype' started with executable stack
[    4.090075] PM: Image not found (code -22)
[    4.130945] scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 3.0      PQ: 0 ANSI: 6
[    4.132031] sd 4:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB)
[    4.132547] sd 4:0:0:0: [sdb] Write Protect is off
[    4.132553] sd 4:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[    4.132809] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn'
t support DPO or FUA
[    4.148667]  sdb: sdb1
[    4.150165] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    4.186994] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.268931] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    4.334801] systemd[1]: Inserted module 'autofs4'
[    4.349079] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.366511] systemd[1]: Detected architecture x86-64.
[    4.391089] systemd[1]: Set hostname to <DEB-KOR>.
[    4.480173] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
[    4.489896] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[    4.494021] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[    4.496839] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[    4.516036] systemd[1]: Listening on udev Control Socket.
[    4.516195] systemd[1]: Listening on Syslog Socket.
[    4.516260] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.550086] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.588577] lp: driver loaded but no devices found
[    4.600301] ppdev: user-space parallel port driver
[    4.603433] RPC: Registered named UNIX socket transport module.
[    4.603434] RPC: Registered udp transport module.
[    4.603435] RPC: Registered tcp transport module.
[    4.603436] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.670375] systemd-journald[244]: Received request to flush runtime journal from PID 1
[    4.683110] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    4.864950] audit: type=1400 audit(1605957242.877:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=356 comm="apparmor_parser"
[    4.865509] audit: type=1400 audit(1605957242.877:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=355 comm="apparmor_parser"
[    4.865513] audit: type=1400 audit(1605957242.877:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=355 comm="apparmor_parser"
[    4.865515] audit: type=1400 audit(1605957242.877:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=355 comm="apparmor_parser"
[    4.870564] audit: type=1400 audit(1605957242.885:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=357 comm="apparmor_parser"
[    4.870749] audit: type=1400 audit(1605957242.885:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=354 comm="apparmor_parser"
[    4.870752] audit: type=1400 audit(1605957242.885:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=354 comm="apparmor_parser"
[    4.878814] audit: type=1400 audit(1605957242.893:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=353 comm="apparmor_parser"
[    4.878819] audit: type=1400 audit(1605957242.893:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=353 comm="apparmor_parser"
[    4.888290] ACPI: AC Adapter [ACAD] (on-line)
[    5.028307] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    5.088085] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    5.088087] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.088088] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.088089] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.105461] mc: Linux media interface: v0.10
[    5.135382] iTCO_vendor_support: vendor-support=0
[    5.135533] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.135615] cryptd: max_cpu_qlen set to 1000
[    5.135798] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.135840] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    5.144251] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.144306] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    5.159748] input: SYN1B7E:01 06CB:2970 Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input12
[    5.163551] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.170308] input: SYN1B7E:01 06CB:2970 Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input13
[    5.179819] hid-multitouch 0018:06CB:2970.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7E:01 06CB:2970] on i2c-SYN1B7E:01
[    5.226754] at24 2-0050: supply vcc not found, using dummy regulator
[    5.227309] at24 2-0050: 256 byte spd EEPROM, read-only
[    5.231596] AVX2 version of gcm_enc/dec engaged.
[    5.231597] AES CTR mode by8 optimization enabled
[    5.263405] acer_wmi: Acer Laptop ACPI-WMI Extras
[    5.263438] acer_wmi: Function bitmap for Communication Button: 0x801
[    5.270073] videodev: Linux video capture interface: v2.00
[    5.295283] input: Acer WMI hotkeys as /devices/virtual/input/input15
[    5.356410] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.356757] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    5.357100] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    5.357433] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.365142] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    5.365280] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    5.381141] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.406365] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b452)
[    5.424950] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized!
[    5.424953] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized!
[    5.424955] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized!
[    5.425042] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input21
[    5.427402] usbcore: registered new interface driver uvcvideo
[    5.427403] USB Video Class driver (1.1.1)
[    5.437138] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    5.440251] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    5.440377] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    5.451823] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    5.453502] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    5.480415] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.480418] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.480421] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.480422] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.480423] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.480425] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x12
[    5.584359] ath: phy0: ASPM enabled: 0x42
[    5.584361] ath: EEPROM regdomain: 0x6c
[    5.584362] ath: EEPROM indicates we should expect a direct regpair map
[    5.584364] ath: Country alpha2 being used: 00
[    5.584364] ath: Regpair used: 0x6c
[    5.585480] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.585838] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb1f0c2780000, irq=19
[    5.590262] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.590377] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    5.606667] Adding 4110332k swap on /dev/sda5.  Priority:-2 extents:1 across:4110332k SSFS
[    5.621703] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[    5.715486] Bluetooth: Core ver 2.22
[    5.715501] NET: Registered protocol family 31
[    5.715502] Bluetooth: HCI device and connection manager initialized
[    5.715506] Bluetooth: HCI socket layer initialized
[    5.715509] Bluetooth: L2CAP socket layer initialized
[    5.715513] Bluetooth: SCO socket layer initialized
[    5.760179] usbcore: registered new interface driver btusb
[    5.762753] usbcore: registered new interface driver ath3k
[    5.770746] intel_rapl_common: Found RAPL domain package
[    5.770748] intel_rapl_common: Found RAPL domain core
[    5.770749] intel_rapl_common: Found RAPL domain uncore
[    5.770753] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    5.851153] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.851155] Bluetooth: BNEP filters: protocol multicast
[    5.851160] Bluetooth: BNEP socket layer initialized
[    5.999416] r8169 0000:02:00.1: firmware: failed to load rtl_nic/rtl8411-2.fw (-2)
[    6.000542] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[    6.001260] r8169 0000:02:00.1: Direct firmware load for rtl_nic/rtl8411-2.fw failed with error -2
[    6.001276] r8169 0000:02:00.1: Unable to load firmware rtl_nic/rtl8411-2.fw (-2)
[    6.026247] Generic FE-GE Realtek PHY r8169-201:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-201:00, irq=IGNORE)
[    6.146438] r8169 0000:02:00.1 enp2s0f1: Link is Down
[    7.016529] NFSD: Using UMH upcall client tracking operations.
[    7.016533] NFSD: starting 90-second grace period (net f00000a8)
[    7.328421] broken atomic modeset userspace detected, disabling atomic
[    7.860314] nouveau 0000:04:00.0: bus: MMIO write of 2010001f FAULT at 6013d4 [ IBUS ]
[    8.476209] r8169 0000:02:00.1 enp2s0f1: Link is Up - 100Mbps/Full - flow control rx/tx
[    8.476228] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f1: link becomes ready
[   10.033415] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[   48.223218] usb 2-2: USB disconnect, device number 2
[   48.223221] usb 2-2.2: USB disconnect, device number 4
[   48.290936] usb 2-2.3: USB disconnect, device number 6
[   48.394785] usb 2-2.4: USB disconnect, device number 7
[   48.729671] usb 2-2: new full-speed USB device number 8 using xhci_hcd
[   48.857482] usb 2-2: device descriptor read/64, error -71
[   49.093069] usb 2-2: device descriptor read/64, error -71
[   49.328727] usb 2-2: new full-speed USB device number 9 using xhci_hcd
[   49.456540] usb 2-2: device descriptor read/64, error -71
[   49.692149] usb 2-2: device descriptor read/64, error -71
[   49.800012] usb usb2-port2: attempt power cycle
[   50.450977] usb 2-2: new full-speed USB device number 10 using xhci_hcd
[   50.451150] usb 2-2: Device not responding to setup address.
[   50.658807] usb 2-2: Device not responding to setup address.
[   50.866451] usb 2-2: device not accepting address 10, error -71
[   50.994129] usb 2-2: new full-speed USB device number 11 using xhci_hcd
[   50.994304] usb 2-2: Device not responding to setup address.
[   51.202118] usb 2-2: Device not responding to setup address.
[   51.409555] usb 2-2: device not accepting address 11, error -71
[   51.409616] usb usb2-port2: unable to enumerate USB device
[   70.429015] usb 2-2: new full-speed USB device number 12 using xhci_hcd
[   70.853739] usb 2-2: not running at top speed; connect to a high speed hub
[   70.855291] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[   70.855296] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   70.855299] usb 2-2: Product: USB2.0 Hub
[   70.856338] hub 2-2:1.0: USB hub found
[   70.856642] hub 2-2:1.0: 4 ports detected
[   71.144916] usb 2-2.3: new low-speed USB device number 13 using xhci_hcd
[   71.260372] usb 2-2.3: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30
[   71.260377] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   71.260381] usb 2-2.3: Product: HP Basic USB Keyboard
[   71.260383] usb 2-2.3: Manufacturer: CHICONY
[   71.270667] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:03F0:0024.0004/input/input23
[   71.329300] hid-generic 0003:03F0:0024.0004: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-2.3/input0
[   71.408940] usb 2-2.4: new low-speed USB device number 14 using xhci_hcd
[   71.513117] usb 2-2.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[   71.513123] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   71.513126] usb 2-2.4: Product: USB Optical Mouse
[   71.513129] usb 2-2.4: Manufacturer: Logitech
[   71.515912] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.4/2-2.4:1.0/0003:046D:C077.0005/input/input24
[   71.516222] hid-generic 0003:046D:C077.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2.4/input0
[   81.126519] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=478659 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[   81.126589] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=543607 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[   81.136586] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=478659 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[   81.136610] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=543607 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[   96.112670] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=478659 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[   96.112741] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=543607 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[   96.122843] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=478659 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[   96.122867] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=543607 PROTO=UDP SPT=8612 DPT=8610 LEN=24

 



Au passage : chapeau, l'artiste ! Sans toi, je réinstallais.

Reste une question : comment savoir si on entend l'user lorsqu'il parle dans le micro ? Peut-être avec VLC, et en enregistrant ?

Dernière modification par Lupa (21-11-2020 12:36:23)

Hors ligne

#23 21-11-2020 12:39:13

Anonyme-14
Invité

Re : Plus de sons.

tongue super alors ! Passes en résolu si ça te convient.

Pour savoir si tu entends une autre personne, avoir une discussion en test direct ...

#24 21-11-2020 12:49:46

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Plus de sons.

Ah...

Pas VLC en enregistrement ? Bon.

Et les firmwares ? Je viens de faire une image CloneZilla : je tente le coup de les réinstaller.
Je donne le retour wink

Hors ligne

#25 21-11-2020 13:15:57

Anonyme-14
Invité

Re : Plus de sons.

entre la commande

pactl load-module module-loopback



montes un peu le volume et dis bonjour au micro smile

et donc pour arrêter le test

pactl unload-module module-loopback

Dernière modification par Anonyme-14 (21-11-2020 13:20:54)

Pied de page des forums