[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-11-12
[ 0.000000] Linux version 5.8.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc-8 (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Debian 5.8.10-1~bpo10+1 (2020-09-26)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-0.bpo.2-amd64 root=UUID=52be145a-4735-4fda-9572-fa4dfc525cf9 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096eb9fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000096eba000-0x00000000977b9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000977ba000-0x000000009c8cefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c8cf000-0x000000009cdbefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cdbf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire E5-571G/EA50_HB , BIOS V1.26 12/18/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.788 MHz processor
[ 0.000833] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000834] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000841] last_pfn = 0x15f000 max_arch_pfn = 0x400000000
[ 0.000845] MTRR default type: uncachable
[ 0.000846] MTRR fixed ranges enabled:
[ 0.000847] 00000-9FFFF write-back
[ 0.000848] A0000-BFFFF uncachable
[ 0.000849] C0000-E7FFF write-protect
[ 0.000850] E8000-EFFFF write-combining
[ 0.000850] F0000-FFFFF write-protect
[ 0.000851] MTRR variable ranges enabled:
[ 0.000853] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000854] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000854] 2 base 009D000000 mask 7FFF000000 uncachable
[ 0.000855] 3 base 009E000000 mask 7FFE000000 uncachable
[ 0.000856] 4 base 00FFA00000 mask 7FFFE00000 write-protect
[ 0.000857] 5 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000858] 6 base 0100000000 mask 7F80000000 write-back
[ 0.000859] 7 base 015F000000 mask 7FFF000000 uncachable
[ 0.000859] 8 base 0160000000 mask 7FE0000000 uncachable
[ 0.000860] 9 disabled
[ 0.001181] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001309] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.010454] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[ 0.010802] Using GB pages for direct mapping
[ 0.011076] RAMDISK: [mem 0x32823000-0x35408fff]
[ 0.011082] ACPI: Early table checksum verification disabled
[ 0.011084] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.011088] ACPI: XSDT 0x000000009CFC5188 0000DC (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.011093] ACPI: FACP 0x000000009CFF2000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011098] ACPI: DSDT 0x000000009CFD8000 013AD4 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.011101] ACPI: FACS 0x000000009CFB8000 000040
[ 0.011103] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011105] ACPI: UEFI 0x000000009CFFC000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.011108] ACPI: SSDT 0x000000009CFF8000 003E78 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.011111] ACPI: MSDM 0x000000009CFF7000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011113] ACPI: ASF! 0x000000009CFF6000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011116] ACPI: ASPT 0x000000009CFF5000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011118] ACPI: BOOT 0x000000009CFF4000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011121] ACPI: DBGP 0x000000009CFF3000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011124] ACPI: HPET 0x000000009CFF1000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011126] ACPI: LPIT 0x000000009CFF0000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.011129] ACPI: APIC 0x000000009CFEF000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011131] ACPI: MCFG 0x000000009CFEE000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011134] ACPI: WDAT 0x000000009CFED000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011137] ACPI: SSDT 0x000000009CFD4000 00342F (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.011139] ACPI: SSDT 0x000000009CFEC000 000BD3 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.011142] ACPI: SSDT 0x000000009CFD3000 000539 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.011144] ACPI: SSDT 0x000000009CFD2000 000B74 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.011147] ACPI: SSDT 0x000000009CFCB000 006264 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.011150] ACPI: SSDT 0x000000009CFC7000 00361B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.011152] ACPI: DMAR 0x000000009CFC6000 0000D4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011155] ACPI: CSRT 0x000000009CFC4000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011158] ACPI: FPDT 0x000000009CFC3000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.011165] ACPI: Local APIC address 0xfee00000
[ 0.011249] No NUMA configuration found
[ 0.011250] Faking a node at [mem 0x0000000000000000-0x000000015effffff]
[ 0.011254] NODE_DATA(0) allocated [mem 0x15eff9000-0x15effdfff]
[ 0.011278] Zone ranges:
[ 0.011278] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011280] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011281] Normal [mem 0x0000000100000000-0x000000015effffff]
[ 0.011281] Device empty
[ 0.011282] Movable zone start for each node
[ 0.011283] Early memory node ranges
[ 0.011284] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.011285] node 0: [mem 0x0000000000100000-0x0000000096eb9fff]
[ 0.011286] node 0: [mem 0x00000000977ba000-0x000000009c8cefff]
[ 0.011287] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.011287] node 0: [mem 0x0000000100000000-0x000000015effffff]
[ 0.011493] Zeroed struct page in unavailable ranges: 20627 pages
[ 0.011494] Initmem setup node 0 [mem 0x0000000000001000-0x000000015effffff]
[ 0.011496] On node 0 totalpages: 1027949
[ 0.011497] DMA zone: 64 pages used for memmap
[ 0.011497] DMA zone: 21 pages reserved
[ 0.011498] DMA zone: 3997 pages, LIFO batch:0
[ 0.011551] DMA32 zone: 9920 pages used for memmap
[ 0.011552] DMA32 zone: 634832 pages, LIFO batch:63
[ 0.020345] Normal zone: 6080 pages used for memmap
[ 0.020347] Normal zone: 389120 pages, LIFO batch:63
[ 0.020820] Reserving Intel graphics memory at [mem 0x9e000000-0x9fffffff]
[ 0.020891] ACPI: PM-Timer IO Port: 0x1808
[ 0.020893] ACPI: Local APIC address 0xfee00000
[ 0.020910] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.020912] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.020913] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.020914] ACPI: IRQ0 used by override.
[ 0.020915] ACPI: IRQ9 used by override.
[ 0.020917] Using ACPI (MADT) for SMP configuration information
[ 0.020919] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.020922] TSC deadline timer available
[ 0.020923] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.020942] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.020944] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.020944] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.020945] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.020945] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.020947] PM: hibernation: Registered nosave memory: [mem 0x96eba000-0x977b9fff]
[ 0.020949] PM: hibernation: Registered nosave memory: [mem 0x9c8cf000-0x9cdbefff]
[ 0.020949] PM: hibernation: Registered nosave memory: [mem 0x9cdbf000-0x9cfbefff]
[ 0.020950] PM: hibernation: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.020951] PM: hibernation: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
[ 0.020952] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[ 0.020952] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.020953] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.020954] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.020954] PM: hibernation: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.020955] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.020955] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.020956] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.020956] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.020957] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.020958] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.020958] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.020959] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.020959] PM: hibernation: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.020961] [mem 0xa0000000-0xdfffffff] available for PCI devices
[ 0.020962] Booting paravirtualized kernel on bare hardware
[ 0.020965] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.025976] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.026288] percpu: Embedded 55 pages/cpu s184856 r8192 d32232 u524288
[ 0.026294] pcpu-alloc: s184856 r8192 d32232 u524288 alloc=1*2097152
[ 0.026295] pcpu-alloc: [0] 0 1 2 3
[ 0.026320] Built 1 zonelists, mobility grouping on. Total pages: 1011864
[ 0.026321] Policy zone: Normal
[ 0.026322] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-0.bpo.2-amd64 root=UUID=52be145a-4735-4fda-9572-fa4dfc525cf9 ro quiet
[ 0.026732] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.026914] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.026963] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.044760] Memory: 2549140K/4111796K available (12291K kernel code, 1292K rwdata, 4060K rodata, 1632K init, 1864K bss, 210288K reserved, 0K cma-reserved)
[ 0.044769] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
[ 0.044912] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.044927] Kernel/User page tables isolation: enabled
[ 0.044943] ftrace: allocating 35332 entries in 139 pages
[ 0.059602] ftrace: allocated 139 pages with 4 groups
[ 0.059725] rcu: Hierarchical RCU implementation.
[ 0.059726] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.059727] Rude variant of Tasks RCU enabled.
[ 0.059728] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.059729] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.063677] NR_IRQS: 33024, nr_irqs: 728, preallocated irqs: 16
[ 0.063995] random: crng done (trusting CPU's manufacturer)
[ 0.065921] Console: colour VGA+ 80x25
[ 0.065925] printk: console [tty0] enabled
[ 0.065944] ACPI: Core revision 20200528
[ 0.066166] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.066177] APIC: Switch to symmetric I/O mode setup
[ 0.066179] DMAR: Host address width 39
[ 0.066180] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.066185] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.066186] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.066189] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.066190] DMAR: RMRR base: 0x0000009cd65000 end: 0x0000009cd84fff
[ 0.066192] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[ 0.066193] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[ 0.066195] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.066195] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.066196] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.066197] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.066877] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.066878] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.067503] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086180] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa2f755c52, max_idle_ns: 440795303691 ns
[ 0.086185] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.57 BogoMIPS (lpj=8779152)
[ 0.086187] pid_max: default: 32768 minimum: 301
[ 0.086222] LSM: Security Framework initializing
[ 0.086228] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.086256] AppArmor: AppArmor initialized
[ 0.086257] TOMOYO Linux initialized
[ 0.086286] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.086298] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.086598] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.086611] process: using mwait in idle threads
[ 0.086614] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.086615] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.086617] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.086618] Spectre V2 : Mitigation: Full generic retpoline
[ 0.086619] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.086619] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.086621] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.086621] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.086622] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.086626] SRBDS: Mitigation: Microcode
[ 0.086626] MDS: Mitigation: Clear CPU buffers
[ 0.086831] Freeing SMP alternatives memory: 32K
[ 0.090267] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.090416] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.090433] ... version: 3
[ 0.090434] ... bit width: 48
[ 0.090435] ... generic registers: 4
[ 0.090435] ... value mask: 0000ffffffffffff
[ 0.090436] ... max period: 00007fffffffffff
[ 0.090436] ... fixed-purpose events: 3
[ 0.090437] ... event mask: 000000070000000f
[ 0.090476] rcu: Hierarchical SRCU implementation.
[ 0.091181] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.091239] smp: Bringing up secondary CPUs ...
[ 0.091329] x86: Booting SMP configuration:
[ 0.091330] .... node #0, CPUs: #1 #2
[ 0.094283] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.094307] #3
[ 0.094684] smp: Brought up 1 node, 4 CPUs
[ 0.094684] smpboot: Max logical packages: 1
[ 0.094684] smpboot: Total of 4 processors activated (17558.30 BogoMIPS)
[ 0.101462] node 0 deferred pages initialised in 4ms
[ 0.101467] devtmpfs: initialized
[ 0.101467] x86/mm: Memory block size: 128MB
[ 0.102224] PM: Registering ACPI NVS region [mem 0x9cdbf000-0x9cfbefff] (2097152 bytes)
[ 0.102289] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.102289] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.102289] pinctrl core: initialized pinctrl subsystem
[ 0.102355] thermal_sys: Registered thermal governor 'fair_share'
[ 0.102356] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.102357] thermal_sys: Registered thermal governor 'step_wise'
[ 0.102358] thermal_sys: Registered thermal governor 'user_space'
[ 0.102483] NET: Registered protocol family 16
[ 0.102564] audit: initializing netlink subsys (disabled)
[ 0.102574] audit: type=2000 audit(1605957238.036:1): state=initialized audit_enabled=0 res=1
[ 0.102574] cpuidle: using governor ladder
[ 0.102574] cpuidle: using governor menu
[ 0.102574] Simple Boot Flag at 0x44 set to 0x1
[ 0.102574] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.102574] ACPI: bus type PCI registered
[ 0.102574] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.102574] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.102574] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.102574] PCI: Using configuration type 1 for base access
[ 0.102574] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.102574] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.102574] mtrr: probably your BIOS does not setup all CPUs.
[ 0.102574] mtrr: corrected configuration.
[ 0.103184] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.103184] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.274308] ACPI: Added _OSI(Module Device)
[ 0.274308] ACPI: Added _OSI(Processor Device)
[ 0.274308] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.274308] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.274308] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.274308] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.274308] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.289561] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.294696] ACPI: Dynamic OEM Table Load:
[ 0.294705] ACPI: SSDT 0xFFFF88F58773C400 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.295921] ACPI: Dynamic OEM Table Load:
[ 0.295928] ACPI: SSDT 0xFFFF88F5875B9000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.297123] ACPI: Dynamic OEM Table Load:
[ 0.297129] ACPI: SSDT 0xFFFF88F587686800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.299138] ACPI: EC: EC started
[ 0.299139] ACPI: EC: interrupt blocked
[ 0.299480] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.299482] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.299483] ACPI: Interpreter enabled
[ 0.299523] ACPI: (supports S0 S3 S4 S5)
[ 0.299524] ACPI: Using IOAPIC for interrupt routing
[ 0.299558] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.300169] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 0.300182] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.312097] ACPI: Power Resource [PC05] (on)
[ 0.314776] ACPI: Power Resource [FN00] (off)
[ 0.314849] ACPI: Power Resource [FN01] (off)
[ 0.314917] ACPI: Power Resource [FN02] (off)
[ 0.314988] ACPI: Power Resource [FN03] (off)
[ 0.315055] ACPI: Power Resource [FN04] (off)
[ 0.315956] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.315962] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.316838] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.316839] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.317693] PCI host bridge to bus 0000:00
[ 0.317695] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.317696] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.317698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.317699] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[ 0.317700] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.317710] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.318003] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.318015] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
[ 0.318021] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.318026] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.318039] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.318327] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.318337] pci 0000:00:03.0: reg 0x10: [mem 0xc4210000-0xc4213fff 64bit]
[ 0.318657] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.318676] pci 0000:00:14.0: reg 0x10: [mem 0xc4200000-0xc420ffff 64bit]
[ 0.318733] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.319011] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.319033] pci 0000:00:16.0: reg 0x10: [mem 0xc4219000-0xc421901f 64bit]
[ 0.319100] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.319397] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.319417] pci 0000:00:1b.0: reg 0x10: [mem 0xc4214000-0xc4217fff 64bit]
[ 0.319474] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.319760] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.320060] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.320079] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.320081] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.320399] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[ 0.320480] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.320498] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.320499] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.320806] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.320884] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.320901] pci 0000:00:1c.3: Enabling MPC IRBNCE
[ 0.320903] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 0.321208] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[ 0.321285] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.321302] pci 0000:00:1c.4: Enabling MPC IRBNCE
[ 0.321304] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 0.321614] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.326575] pci 0000:00:1d.0: reg 0x10: [mem 0xc421d000-0xc421d3ff]
[ 0.328165] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.328451] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.328834] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.328849] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.328855] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.328861] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.328867] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.328873] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.328880] pci 0000:00:1f.2: reg 0x24: [mem 0xc421c000-0xc421c7ff]
[ 0.328913] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.329187] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.329203] pci 0000:00:1f.3: reg 0x10: [mem 0xc4218000-0xc42180ff 64bit]
[ 0.329221] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 0.329513] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 0.329546] pci 0000:00:1f.6: reg 0x10: [mem 0xc421b000-0xc421bfff 64bit]
[ 0.329949] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.330011] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
[ 0.330041] pci 0000:02:00.0: reg 0x10: [mem 0xc4105000-0xc4105fff]
[ 0.330102] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.330196] pci 0000:02:00.0: supports D1 D2
[ 0.330197] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.330349] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
[ 0.330378] pci 0000:02:00.1: reg 0x10: [io 0x4000-0x40ff]
[ 0.330405] pci 0000:02:00.1: reg 0x18: [mem 0xc4104000-0xc4104fff 64bit]
[ 0.330422] pci 0000:02:00.1: reg 0x20: [mem 0xc4100000-0xc4103fff 64bit]
[ 0.330523] pci 0000:02:00.1: supports D1 D2
[ 0.330524] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330669] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.330671] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.330674] pci 0000:00:1c.2: bridge window [mem 0xc4100000-0xc41fffff]
[ 0.330730] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[ 0.330762] pci 0000:03:00.0: reg 0x10: [mem 0xc4000000-0xc407ffff 64bit]
[ 0.330813] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.330887] pci 0000:03:00.0: supports D1 D2
[ 0.330888] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.331030] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.331034] pci 0000:00:1c.3: bridge window [mem 0xc4000000-0xc40fffff]
[ 0.331091] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
[ 0.331117] pci 0000:04:00.0: reg 0x10: [mem 0xc3000000-0xc3ffffff]
[ 0.331132] pci 0000:04:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.331147] pci 0000:04:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.331157] pci 0000:04:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.331167] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.331186] pci 0000:04:00.0: Enabling HDA controller
[ 0.331279] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link)
[ 0.331374] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.331376] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.331379] pci 0000:00:1c.4: bridge window [mem 0xc3000000-0xc3ffffff]
[ 0.331383] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.396441] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.396490] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.396537] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.396585] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.396632] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.396679] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.396727] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.396777] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.397193] ACPI: EC: interrupt unblocked
[ 0.397194] ACPI: EC: event unblocked
[ 0.397203] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.397204] ACPI: EC: GPE=0x27
[ 0.397207] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.397208] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.397279] iommu: Default domain type: Translated
[ 0.397294] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.397294] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.397294] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.397294] vgaarb: loaded
[ 0.587443] EDAC MC: Ver: 3.0.0
[ 0.587515] NetLabel: Initializing
[ 0.587515] NetLabel: domain hash size = 128
[ 0.587515] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.587515] NetLabel: unlabeled traffic allowed by default
[ 0.587515] PCI: Using ACPI for IRQ routing
[ 0.589125] PCI: pci_cache_line_size set to 64 bytes
[ 0.589172] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.589173] e820: reserve RAM buffer [mem 0x96eba000-0x97ffffff]
[ 0.589174] e820: reserve RAM buffer [mem 0x9c8cf000-0x9fffffff]
[ 0.589175] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.589176] e820: reserve RAM buffer [mem 0x15f000000-0x15fffffff]
[ 0.589735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.589740] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.595207] clocksource: Switched to clocksource tsc-early
[ 0.605843] VFS: Disk quotas dquot_6.6.0
[ 0.605862] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.605993] AppArmor: AppArmor Filesystem Enabled
[ 0.606012] pnp: PnP ACPI init
[ 0.606255] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.606257] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.606258] system 00:00: [io 0xffff] has been reserved
[ 0.606260] system 00:00: [io 0xffff] has been reserved
[ 0.606261] system 00:00: [io 0xffff] has been reserved
[ 0.606262] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.606263] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.606269] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.606322] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.606368] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.606372] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.606399] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.678755] system 00:04: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.678757] system 00:04: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.678759] system 00:04: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.678762] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.679645] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.679646] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.679648] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.679649] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.679650] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.679652] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.679653] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.679654] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.679656] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.679657] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.679658] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[ 0.679660] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[ 0.679663] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.679877] pnp: PnP ACPI: found 6 devices
[ 0.685640] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.685702] NET: Registered protocol family 2
[ 0.685847] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.685880] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.685968] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.686054] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.686097] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.686112] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.686156] NET: Registered protocol family 1
[ 0.686161] NET: Registered protocol family 44
[ 0.686165] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.686167] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.686168] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.686173] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.686175] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.686176] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.686189] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[ 0.686194] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.686197] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.686199] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.686201] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.686205] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff]
[ 0.686208] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.686214] pci 0000:02:00.0: BAR 6: assigned [mem 0xc4110000-0xc411ffff pref]
[ 0.686215] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.686217] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.686220] pci 0000:00:1c.2: bridge window [mem 0xc4100000-0xc41fffff]
[ 0.686227] pci 0000:03:00.0: BAR 6: assigned [mem 0xc4080000-0xc408ffff pref]
[ 0.686228] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.686231] pci 0000:00:1c.3: bridge window [mem 0xc4000000-0xc40fffff]
[ 0.686238] pci 0000:04:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.686240] pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.686241] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.686242] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.686246] pci 0000:00:1c.4: bridge window [mem 0xc3000000-0xc3ffffff]
[ 0.686248] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.686254] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.686255] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.686256] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.686257] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
[ 0.686259] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.686260] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[ 0.686261] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.686262] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.686263] pci_bus 0000:02: resource 1 [mem 0xc4100000-0xc41fffff]
[ 0.686264] pci_bus 0000:03: resource 1 [mem 0xc4000000-0xc40fffff]
[ 0.686265] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.686266] pci_bus 0000:04: resource 1 [mem 0xc3000000-0xc3ffffff]
[ 0.686267] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.686390] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.686475] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.686476] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.710293] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x643 took 19287 usecs
[ 0.710322] PCI: CLS 64 bytes, default 64
[ 0.710368] Trying to unpack rootfs image as initramfs...
[ 1.466396] Freeing initrd memory: 44952K
[ 1.466550] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[ 1.466563] DMAR: No ATSR found
[ 1.466605] DMAR: dmar1: Using Queued invalidation
[ 1.466670] pci 0000:00:00.0: Adding to iommu group 0
[ 1.466681] pci 0000:00:03.0: Adding to iommu group 1
[ 1.466691] pci 0000:00:14.0: Adding to iommu group 2
[ 1.466706] pci 0000:00:16.0: Adding to iommu group 3
[ 1.466715] pci 0000:00:1b.0: Adding to iommu group 4
[ 1.466725] pci 0000:00:1c.0: Adding to iommu group 5
[ 1.466735] pci 0000:00:1c.2: Adding to iommu group 6
[ 1.466745] pci 0000:00:1c.3: Adding to iommu group 7
[ 1.466754] pci 0000:00:1c.4: Adding to iommu group 8
[ 1.466764] pci 0000:00:1d.0: Adding to iommu group 9
[ 1.466789] pci 0000:00:1f.0: Adding to iommu group 10
[ 1.466799] pci 0000:00:1f.2: Adding to iommu group 10
[ 1.466810] pci 0000:00:1f.3: Adding to iommu group 10
[ 1.466819] pci 0000:00:1f.6: Adding to iommu group 10
[ 1.466848] pci 0000:02:00.0: Adding to iommu group 11
[ 1.466869] pci 0000:02:00.1: Adding to iommu group 11
[ 1.466878] pci 0000:03:00.0: Adding to iommu group 12
[ 1.466889] pci 0000:04:00.0: Adding to iommu group 13
[ 1.469262] platform INTL9C60:00: Adding to iommu group 14
[ 1.469315] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.469316] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.469318] software IO TLB: mapped [mem 0x988cf000-0x9c8cf000] (64MB)
[ 1.469754] Initialise system trusted keyrings
[ 1.469767] Key type blacklist registered
[ 1.469818] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.471055] zbud: loaded
[ 1.471215] integrity: Platform Keyring initialized
[ 1.471217] Key type asymmetric registered
[ 1.471218] Asymmetric key parser 'x509' registered
[ 1.471225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.471276] io scheduler mq-deadline registered
[ 1.471610] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[ 1.471636] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.471882] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
[ 1.472060] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
[ 1.472222] pcieport 0000:00:1c.4: PME: Signaling with IRQ 45
[ 1.472305] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.472324] intel_idle: MWAIT substates: 0x11142120
[ 1.472324] intel_idle: v0.5.1 model 0x3D
[ 1.472557] intel_idle: Local APIC timer is reliable in all C-states
[ 1.472999] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200528/psargs-330)
[ 1.473066] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20200528/psparse-531)
[ 1.473214] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200528/psargs-330)
[ 1.473276] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20200528/psparse-531)
[ 1.473380] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200528/psargs-330)
[ 1.473442] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20200528/psparse-531)
[ 1.473537] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECRD], AE_NOT_FOUND (20200528/psargs-330)
[ 1.473599] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20200528/psparse-531)
[ 1.473804] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.474264] Linux agpgart interface v0.103
[ 1.474301] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.474301] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.474595] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[ 1.474596] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.480154] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.480421] mousedev: PS/2 mouse device common for all mice
[ 1.480462] rtc_cmos 00:01: RTC can wake from S4
[ 1.480674] rtc_cmos 00:01: registered as rtc0
[ 1.480719] rtc_cmos 00:01: setting system clock to 2020-11-21T11:13:59 UTC (1605957239)
[ 1.480739] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.480750] intel_pstate: Intel P-state driver initializing
[ 1.480941] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.481216] NET: Registered protocol family 10
[ 1.488189] Segment Routing with IPv6
[ 1.488213] mip6: Mobile IPv6
[ 1.488216] NET: Registered protocol family 17
[ 1.488256] mpls_gso: MPLS GSO support
[ 1.488460] microcode: sig=0x306d4, pf=0x40, revision=0x2f
[ 1.488475] microcode: Microcode Update Driver: v2.2.
[ 1.488479] IPI shorthand broadcast: enabled
[ 1.488486] sched_clock: Marking stable (1486116906, 2296474)->(1499871057, -11457677)
[ 1.488565] registered taskstats version 1
[ 1.488567] Loading compiled-in X.509 certificates
[ 1.490757] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.523233] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.523252] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 1.523274] zswap: loaded using pool lzo/zbud
[ 1.523412] Key type ._fscrypt registered
[ 1.523413] Key type .fscrypt registered
[ 1.523413] Key type fscrypt-provisioning registered
[ 1.523459] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.524892] Freeing unused kernel image (initmem) memory: 1632K
[ 1.550301] Write protecting the kernel read-only data: 18432k
[ 1.551457] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.551630] Freeing unused kernel image (rodata/data gap) memory: 36K
[ 1.729224] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.729227] x86/mm: Checking user space page tables
[ 1.884009] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.884035] Run /init as init process
[ 1.884048] with arguments:
[ 1.884049] /init
[ 1.884050] with environment:
[ 1.884051] HOME=/
[ 1.884051] TERM=linux
[ 1.884052] BOOT_IMAGE=/boot/vmlinuz-5.8.0-0.bpo.2-amd64
[ 1.954308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input1
[ 1.954337] ACPI: Lid Switch [LID0]
[ 1.954424] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.954447] ACPI: Sleep Button [SLPB]
[ 1.954497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.954536] ACPI: Power Button [PWRF]
[ 1.962285] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 1.962288] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 1.962290] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 1.962292] wmi_bus wmi_bus-PNP0C14:02: WQ data block query control method not found
[ 1.963401] hid: raw HID events driver (C) Jiri Kosina
[ 1.982390] i2c_hid i2c-SYN1B7E:01: supply vdd not found, using dummy regulator
[ 1.982409] i2c_hid i2c-SYN1B7E:01: supply vddl not found, using dummy regulator
[ 1.987695] ACPI: bus type USB registered
[ 1.987713] usbcore: registered new interface driver usbfs
[ 1.987719] usbcore: registered new interface driver hub
[ 1.987742] usbcore: registered new device driver usb
[ 2.002342] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 2.009798] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 2.018614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.019683] ehci-pci: EHCI PCI platform driver
[ 2.027921] SCSI subsystem initialized
[ 2.029184] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 2.034167] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.034175] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.034199] ehci-pci 0000:00:1d.0: debug port 2
[ 2.038140] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.038161] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc421d000
[ 2.038288] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 2.038289] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 2.038943] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 2.038970] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.038972] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 2.040274] i2c i2c-2: 1/2 memory slots populated (from DMI)
[ 2.042315] i2c i2c-2: Successfully instantiated SPD at 0x50
[ 2.050224] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.050410] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 2.050412] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.050414] usb usb1: Product: EHCI Host Controller
[ 2.050415] usb usb1: Manufacturer: Linux 5.8.0-0.bpo.2-amd64 ehci_hcd
[ 2.050417] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.050567] hub 1-0:1.0: USB hub found
[ 2.050575] hub 1-0:1.0: 2 ports detected
[ 2.050880] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.050890] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.051976] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 2.051981] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.052178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 2.052180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.052182] usb usb2: Product: xHCI Host Controller
[ 2.052183] usb usb2: Manufacturer: Linux 5.8.0-0.bpo.2-amd64 xhci-hcd
[ 2.052185] usb usb2: SerialNumber: 0000:00:14.0
[ 2.052321] hub 2-0:1.0: USB hub found
[ 2.052335] hub 2-0:1.0: 11 ports detected
[ 2.057893] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.057898] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.057902] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.057951] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 2.057953] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.057955] usb usb3: Product: xHCI Host Controller
[ 2.057956] usb usb3: Manufacturer: Linux 5.8.0-0.bpo.2-amd64 xhci-hcd
[ 2.057958] usb usb3: SerialNumber: 0000:00:14.0
[ 2.058092] hub 3-0:1.0: USB hub found
[ 2.058101] hub 3-0:1.0: 4 ports detected
[ 2.065047] libata version 3.00 loaded.
[ 2.071621] ahci 0000:00:1f.2: version 3.0
[ 2.071816] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.074229] libphy: r8169: probed
[ 2.074426] r8169 0000:02:00.1 eth0: RTL8411b, f0:76:1c:84:91:36, XID 5c8, IRQ 48
[ 2.074428] r8169 0000:02:00.1 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 2.085863] r8169 0000:02:00.1 enp2s0f1: renamed from eth0
[ 2.086712] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 2.086716] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part deso sadm sds apst
[ 2.087685] scsi host0: ahci
[ 2.092739] scsi host1: ahci
[ 2.093087] scsi host2: ahci
[ 2.098203] scsi host3: ahci
[ 2.098280] ata1: SATA max UDMA/133 abar m2048@0xc421c000 port 0xc421c100 irq 49
[ 2.098282] ata2: SATA max UDMA/133 abar m2048@0xc421c000 port 0xc421c180 irq 49
[ 2.098283] ata3: DUMMY
[ 2.098284] ata4: DUMMY
[ 2.134385] battery: [Firmware Bug]: battery: (dis)charge rate invalid.
[ 2.134567] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 2.159548] ACPI Warning: \_SB.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-66)
[ 2.159776] pci 0000:04:00.0: optimus capabilities: enabled, status dynamic power,
[ 2.159777] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PXSX handle
[ 2.159804] nouveau 0000:04:00.0: enabling device (0106 -> 0107)
[ 2.159950] nouveau 0000:04:00.0: NVIDIA GF117 (0d7000a2)
[ 2.211668] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.212949] Console: switching to colour dummy device 80x25
[ 2.213095] [drm] ACPI BIOS requests an excessive sleep of 10000 ms, using 1500 ms instead
[ 2.222065] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.223476] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.224793] nouveau 0000:04:00.0: bios: version 75.17.86.00.2a
[ 2.307799] nouveau 0000:04:00.0: fb: 2048 MiB DDR3
[ 2.308185] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
[ 2.321527] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.322219] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 2.322321] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[ 2.322333] ACPI: Video Device [PXSX] (multi-head: yes rom: yes post: no)
[ 2.322382] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:52/LNXVIDEO:01/input/input5
[ 2.390236] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.406227] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[ 2.412844] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.414778] ata1.00: supports DRM functions and may not be fully accessible
[ 2.415634] ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
[ 2.415635] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.418020] ata1.00: supports DRM functions and may not be fully accessible
[ 2.420835] ata1.00: configured for UDMA/133
[ 2.430914] ahci 0000:00:1f.2: port does not support device sleep
[ 2.431095] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
[ 2.498226] tsc: Refined TSC clocksource calibration: 2194.920 MHz
[ 2.498231] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa373f688b, max_idle_ns: 440795233648 ns
[ 2.502278] clocksource: Switched to clocksource tsc
[ 2.520887] fbcon: i915drmfb (fb0) is primary device
[ 2.562636] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 2.562637] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.562964] hub 1-1:1.0: USB hub found
[ 2.563134] hub 1-1:1.0: 8 ports detected
[ 2.591419] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[ 2.591421] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.591422] usb 2-2: Product: USB2.0 Hub
[ 2.592584] hub 2-2:1.0: USB hub found
[ 2.592854] hub 2-2:1.0: 4 ports detected
[ 2.726239] usb 2-5: new full-speed USB device number 3 using xhci_hcd
[ 2.744908] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.747878] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
[ 2.750297] ata2.00: configured for UDMA/100
[ 2.754509] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC 1.00 PQ: 0 ANSI: 5
[ 2.935519] usb 2-5: string descriptor 0 read error: -22
[ 2.935522] usb 2-5: New USB device found, idVendor=0489, idProduct=e04e, bcdDevice= 0.02
[ 2.935523] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.014225] usb 2-2.2: new high-speed USB device number 4 using xhci_hcd
[ 3.123846] usb 2-2.2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
[ 3.123847] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.123848] usb 2-2.2: Product: DataTraveler 3.0
[ 3.123849] usb 2-2.2: Manufacturer: Kingston
[ 3.123850] usb 2-2.2: SerialNumber: E0D55EA573F5F42049B24025
[ 3.129832] usb-storage 2-2.2:1.0: USB Mass Storage device detected
[ 3.129965] scsi host4: usb-storage 2-2.2:1.0
[ 3.130062] usbcore: registered new interface driver usb-storage
[ 3.131402] input: SYN1B7E:01 06CB:2970 Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input6
[ 3.131731] input: SYN1B7E:01 06CB:2970 Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input7
[ 3.131812] hid-generic 0018:06CB:2970.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7E:01 06CB:2970] on i2c-SYN1B7E:01
[ 3.131859] usbcore: registered new interface driver uas
[ 3.242222] usb 2-7: new high-speed USB device number 5 using xhci_hcd
[ 3.448029] usb 2-7: New USB device found, idVendor=04f2, idProduct=b452, bcdDevice=29.69
[ 3.448030] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.448031] usb 2-7: Product: HD WebCam
[ 3.448032] usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 3.448033] usb 2-7: SerialNumber: 0001
[ 3.470219] usb 2-2.3: new low-speed USB device number 6 using xhci_hcd
[ 3.568547] Console: switching to colour frame buffer device 170x48
[ 3.590764] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 3.593239] usb 2-2.3: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30
[ 3.593240] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.593241] usb 2-2.3: Product: HP Basic USB Keyboard
[ 3.593242] usb 2-2.3: Manufacturer: CHICONY
[ 3.606743] vga_switcheroo: enabled
[ 3.606909] [TTM] Zone kernel: Available graphics memory: 1975102 KiB
[ 3.606909] [TTM] Initializing pool allocator
[ 3.606923] [TTM] Initializing DMA pool allocator
[ 3.606940] nouveau 0000:04:00.0: DRM: VRAM: 2048 MiB
[ 3.606941] nouveau 0000:04:00.0: DRM: GART: 1048576 MiB
[ 3.606943] nouveau 0000:04:00.0: DRM: Pointer to TMDS table not found
[ 3.606944] nouveau 0000:04:00.0: DRM: DCB version 4.0
[ 3.608019] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:03F0:0024.0002/input/input9
[ 3.608540] nouveau 0000:04:00.0: DRM: MM: using COPY0 for buffer copies
[ 3.608912] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 1
[ 3.626780] ata1.00: Enabling discard_zeroes_data
[ 3.626838] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 3.626847] sd 0:0:0:0: [sda] Write Protect is off
[ 3.626849] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.626866] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.642476] ata1.00: Enabling discard_zeroes_data
[ 3.645531] sda: sda1 sda2 < sda5 >
[ 3.645952] ata1.00: Enabling discard_zeroes_data
[ 3.647130] sd 0:0:0:0: [sda] supports TCG Opal
[ 3.647132] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.657688] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.657690] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.666607] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-2.3/input0
[ 3.666730] usbcore: registered new interface driver usbhid
[ 3.666733] usbhid: USB HID core driver
[ 3.671158] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.674248] usb 2-2.4: new low-speed USB device number 7 using xhci_hcd
[ 3.779195] usb 2-2.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 3.779198] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.779199] usb 2-2.4: Product: USB Optical Mouse
[ 3.779200] usb 2-2.4: Manufacturer: Logitech
[ 3.783607] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.4/2-2.4:1.0/0003:046D:C077.0003/input/input10
[ 3.783698] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2.4/input0
[ 4.080879] process '/usr/bin/fstype' started with executable stack
[ 4.090075] PM: Image not found (code -22)
[ 4.130945] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6
[ 4.132031] sd 4:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB)
[ 4.132547] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.132553] sd 4:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 4.132809] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.148667] sdb: sdb1
[ 4.150165] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.186994] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.268931] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 4.334801] systemd[1]: Inserted module 'autofs4'
[ 4.349079] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.366511] systemd[1]: Detected architecture x86-64.
[ 4.391089] systemd[1]: Set hostname to <DEB-KOR>.
[ 4.480173] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
[ 4.489896] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[ 4.494021] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[ 4.496839] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[ 4.516036] systemd[1]: Listening on udev Control Socket.
[ 4.516195] systemd[1]: Listening on Syslog Socket.
[ 4.516260] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.550086] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.588577] lp: driver loaded but no devices found
[ 4.600301] ppdev: user-space parallel port driver
[ 4.603433] RPC: Registered named UNIX socket transport module.
[ 4.603434] RPC: Registered udp transport module.
[ 4.603435] RPC: Registered tcp transport module.
[ 4.603436] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.670375] systemd-journald[244]: Received request to flush runtime journal from PID 1
[ 4.683110] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.864950] audit: type=1400 audit(1605957242.877:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=356 comm="apparmor_parser"
[ 4.865509] audit: type=1400 audit(1605957242.877:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=355 comm="apparmor_parser"
[ 4.865513] audit: type=1400 audit(1605957242.877:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=355 comm="apparmor_parser"
[ 4.865515] audit: type=1400 audit(1605957242.877:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=355 comm="apparmor_parser"
[ 4.870564] audit: type=1400 audit(1605957242.885:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=357 comm="apparmor_parser"
[ 4.870749] audit: type=1400 audit(1605957242.885:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=354 comm="apparmor_parser"
[ 4.870752] audit: type=1400 audit(1605957242.885:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=354 comm="apparmor_parser"
[ 4.878814] audit: type=1400 audit(1605957242.893:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=353 comm="apparmor_parser"
[ 4.878819] audit: type=1400 audit(1605957242.893:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=353 comm="apparmor_parser"
[ 4.888290] ACPI: AC Adapter [ACAD] (on-line)
[ 5.028307] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 5.088085] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 5.088087] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.088088] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.088089] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.105461] mc: Linux media interface: v0.10
[ 5.135382] iTCO_vendor_support: vendor-support=0
[ 5.135533] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.135615] cryptd: max_cpu_qlen set to 1000
[ 5.135798] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.135840] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5.144251] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.144306] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 5.159748] input: SYN1B7E:01 06CB:2970 Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input12
[ 5.163551] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.170308] input: SYN1B7E:01 06CB:2970 Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input13
[ 5.179819] hid-multitouch 0018:06CB:2970.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7E:01 06CB:2970] on i2c-SYN1B7E:01
[ 5.226754] at24 2-0050: supply vcc not found, using dummy regulator
[ 5.227309] at24 2-0050: 256 byte spd EEPROM, read-only
[ 5.231596] AVX2 version of gcm_enc/dec engaged.
[ 5.231597] AES CTR mode by8 optimization enabled
[ 5.263405] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 5.263438] acer_wmi: Function bitmap for Communication Button: 0x801
[ 5.270073] videodev: Linux video capture interface: v2.00
[ 5.295283] input: Acer WMI hotkeys as /devices/virtual/input/input15
[ 5.356410] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.356757] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 5.357100] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 5.357433] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.365142] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 5.365280] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 5.381141] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.406365] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b452)
[ 5.424950] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.424953] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.424955] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.425042] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input21
[ 5.427402] usbcore: registered new interface driver uvcvideo
[ 5.427403] USB Video Class driver (1.1.1)
[ 5.437138] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 5.440251] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 5.440377] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 5.451823] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 5.453502] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 5.480415] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 5.480418] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.480421] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 5.480422] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 5.480423] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 5.480425] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
[ 5.584359] ath: phy0: ASPM enabled: 0x42
[ 5.584361] ath: EEPROM regdomain: 0x6c
[ 5.584362] ath: EEPROM indicates we should expect a direct regpair map
[ 5.584364] ath: Country alpha2 being used: 00
[ 5.584364] ath: Regpair used: 0x6c
[ 5.585480] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.585838] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb1f0c2780000, irq=19
[ 5.590262] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 5.590377] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 5.606667] Adding 4110332k swap on /dev/sda5. Priority:-2 extents:1 across:4110332k SSFS
[ 5.621703] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[ 5.715486] Bluetooth: Core ver 2.22
[ 5.715501] NET: Registered protocol family 31
[ 5.715502] Bluetooth: HCI device and connection manager initialized
[ 5.715506] Bluetooth: HCI socket layer initialized
[ 5.715509] Bluetooth: L2CAP socket layer initialized
[ 5.715513] Bluetooth: SCO socket layer initialized
[ 5.760179] usbcore: registered new interface driver btusb
[ 5.762753] usbcore: registered new interface driver ath3k
[ 5.770746] intel_rapl_common: Found RAPL domain package
[ 5.770748] intel_rapl_common: Found RAPL domain core
[ 5.770749] intel_rapl_common: Found RAPL domain uncore
[ 5.770753] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 5.851153] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.851155] Bluetooth: BNEP filters: protocol multicast
[ 5.851160] Bluetooth: BNEP socket layer initialized
[ 5.999416] r8169 0000:02:00.1: firmware: failed to load rtl_nic/rtl8411-2.fw (-2)
[ 6.000542] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 6.001260] r8169 0000:02:00.1: Direct firmware load for rtl_nic/rtl8411-2.fw failed with error -2
[ 6.001276] r8169 0000:02:00.1: Unable to load firmware rtl_nic/rtl8411-2.fw (-2)
[ 6.026247] Generic FE-GE Realtek PHY r8169-201:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-201:00, irq=IGNORE)
[ 6.146438] r8169 0000:02:00.1 enp2s0f1: Link is Down
[ 7.016529] NFSD: Using UMH upcall client tracking operations.
[ 7.016533] NFSD: starting 90-second grace period (net f00000a8)
[ 7.328421] broken atomic modeset userspace detected, disabling atomic
[ 7.860314] nouveau 0000:04:00.0: bus: MMIO write of 2010001f FAULT at 6013d4 [ IBUS ]
[ 8.476209] r8169 0000:02:00.1 enp2s0f1: Link is Up - 100Mbps/Full - flow control rx/tx
[ 8.476228] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f1: link becomes ready
[ 10.033415] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 48.223218] usb 2-2: USB disconnect, device number 2
[ 48.223221] usb 2-2.2: USB disconnect, device number 4
[ 48.290936] usb 2-2.3: USB disconnect, device number 6
[ 48.394785] usb 2-2.4: USB disconnect, device number 7
[ 48.729671] usb 2-2: new full-speed USB device number 8 using xhci_hcd
[ 48.857482] usb 2-2: device descriptor read/64, error -71
[ 49.093069] usb 2-2: device descriptor read/64, error -71
[ 49.328727] usb 2-2: new full-speed USB device number 9 using xhci_hcd
[ 49.456540] usb 2-2: device descriptor read/64, error -71
[ 49.692149] usb 2-2: device descriptor read/64, error -71
[ 49.800012] usb usb2-port2: attempt power cycle
[ 50.450977] usb 2-2: new full-speed USB device number 10 using xhci_hcd
[ 50.451150] usb 2-2: Device not responding to setup address.
[ 50.658807] usb 2-2: Device not responding to setup address.
[ 50.866451] usb 2-2: device not accepting address 10, error -71
[ 50.994129] usb 2-2: new full-speed USB device number 11 using xhci_hcd
[ 50.994304] usb 2-2: Device not responding to setup address.
[ 51.202118] usb 2-2: Device not responding to setup address.
[ 51.409555] usb 2-2: device not accepting address 11, error -71
[ 51.409616] usb usb2-port2: unable to enumerate USB device
[ 70.429015] usb 2-2: new full-speed USB device number 12 using xhci_hcd
[ 70.853739] usb 2-2: not running at top speed; connect to a high speed hub
[ 70.855291] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[ 70.855296] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 70.855299] usb 2-2: Product: USB2.0 Hub
[ 70.856338] hub 2-2:1.0: USB hub found
[ 70.856642] hub 2-2:1.0: 4 ports detected
[ 71.144916] usb 2-2.3: new low-speed USB device number 13 using xhci_hcd
[ 71.260372] usb 2-2.3: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30
[ 71.260377] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 71.260381] usb 2-2.3: Product: HP Basic USB Keyboard
[ 71.260383] usb 2-2.3: Manufacturer: CHICONY
[ 71.270667] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:03F0:0024.0004/input/input23
[ 71.329300] hid-generic 0003:03F0:0024.0004: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-2.3/input0
[ 71.408940] usb 2-2.4: new low-speed USB device number 14 using xhci_hcd
[ 71.513117] usb 2-2.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 71.513123] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 71.513126] usb 2-2.4: Product: USB Optical Mouse
[ 71.513129] usb 2-2.4: Manufacturer: Logitech
[ 71.515912] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.4/2-2.4:1.0/0003:046D:C077.0005/input/input24
[ 71.516222] hid-generic 0003:046D:C077.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2.4/input0
[ 81.126519] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=478659 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 81.126589] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=543607 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 81.136586] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=478659 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 81.136610] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=543607 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 96.112670] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=478659 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 96.112741] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=543607 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 96.122843] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=478659 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 96.122867] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=543607 PROTO=UDP SPT=8612 DPT=8610 LEN=24