bonjour,
Ma carte Wifi Broadcom Corporation BCM4306 802.11b/g fonctionne sur Debian 8
avec le paquet firmware-b43-installer, merci éfpé !
Mais lorsque je l'installe sur un station Debian10 : pas d'accès Wifi.
DEVICE TYPE STATE CONNECTION
enp2s0 ethernet indisponible --
wlan0 wifi indisponible --
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
grep -i 'fail' /var/log/syslog
wpa_supplicant[434]: wlan0: CTRL-EVENT-SCAN-FAILED ret=-16
NetworkManager[445]: <info> [1606321542.7437] device (wlan0): state change: config -> unavailable (reason 'supplicant-failed', sys-iface-state: 'managed')
Le module paraît correctement installé:
b43 454656 0
bcma 61440 1 b43
mac80211 835584 1 b43
cfg80211 774144 2 b43,mac80211
rng_core 16384 1 b43
ssb 90112 1 b43
mmc_core 176128 2 b43,ssb
filename: /lib/modules/4.19.0-12-amd64/kernel/drivers/net/wireless/broadcom/b43/b43.ko
...................
depends: mac80211,ssb,bcma,mmc_core,cfg80211,rng-core
......................
retpoline: Y
intree: Y
name: b43
........
Ce qui me surprend c'est que "wlan0" n'est pas renommé ???
Dernière modification par gargamel79 (08-12-2020 10:52:38)