Écran noir après grub

madiwas · 07-12-2020 22:08:49

Bonjour,

Mon Debian 10.7 (64 bits) avec le kernel 4.19.0-6-amd64 x86_64 dont le ssd est chiffré boot normalement sur l'image 4.19.0-6-amd64, cependant, toutes les versions supérieures freeze même la dernière 4.19.0-13-amd64.

De souvenir, je n'avais pû installer Debian sur mon PC, j'avais dû faire l'installation sur une autre machine Lenovo X220, pour en suite mettre le disque sur ma machine, qui fonctionne à merveille sous le noyau 4.19.0-6-amd64.

Je rencontre aussi des problèmes avec VirtualBox, qui ne se met pas à jour depuis tout ce temps... est-ce peut-être à cause de la version du dkms et de mon noyau actuel ?

Cela fait beaucoup, mais j'imagine que tout cela est lié, avez-vous une idée de ce qui peu se passer ?

PC : Lenovo T430u
Je viens de changer la pile du BIOS, au cas où, car de temps en temps j'avais des alertes de ce côté, mais pas mieux...

Debian Alain · 07-12-2020 22:24:37

tu as quoi comme cpu , madiwas ?

lscpu

et comme ram :

free -h

Dernière modification par Debian Alain (07-12-2020 22:25:44)

madiwas · 08-12-2020 07:53:09

Bonjour Alain,

Voici ce que j'ai :

Architecture : x86_64
Mode(s) opératoire(s) des processeurs : 32-bit, 64-bit
Boutisme : Little Endian
Tailles des adresses: 36 bits physical, 48 bits virtual
Processeur(s) : 4
Liste de processeur(s) en ligne : 0-3
Thread(s) par cœur : 2
Cœur(s) par socket : 2
Socket(s) : 1
Nœud(s) NUMA : 1
Identifiant constructeur : GenuineIntel
Famille de processeur : 6
Modèle : 58
Nom de modèle : Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz
Révision : 9
Vitesse du processeur en MHz : 1026.043
Vitesse maximale du processeur en MHz : 2600,0000
Vitesse minimale du processeur en MHz : 800,0000
BogoMIPS : 3392.41
Virtualisation : VT-x
Cache L1d : 32K
Cache L1i : 32K
Cache L2 : 256K
Cache L3 : 3072K
Nœud NUMA 0 de processeur(s) : 0-3
Drapaux : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm cpuid_fault epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms xsaveopt dtherm ida arat pln pts flush_l1d

# free -h
total used free shared buff/cache available
Mem: 6,5Gi 3,5Gi 697Mi 321Mi 2,3Gi 2,4Gi
Swap: 7,6Gi 0B 7,6Gi

Debian Alain · 08-12-2020 09:15:06

sais pas . ce que je vois , madiwas , c'est que tu es un peu juste en ram .

donc : -- ta ram --

-- ton pc --

Croutons · 08-12-2020 09:30:03

Debian Alain a écrit :

sais pas . ce que je vois , madiwas , c'est que tu es un peu juste en ram .

comment un peu juste pourquoi faire?
la ram rien a voir dans l'histoire, on est pas sous Windows10 hein
faudrait voir dans les fichiers log la différence des messages entre le noyau qui fonctionne et les autres

Je rencontre aussi des problèmes avec VirtualBox, qui ne se met pas à jour depuis tout ce temps

Normale a part si le dépot Oracle a été ajouté

Debian Alain · 08-12-2020 09:43:02

croutons a écrit :

comment un peu juste pourquoi faire?

ben 600 -700 Mo pour travailler , c'est pas beaucoup . tout dépend ce qu'on fait bien sûr ...

croutons a écrit :

la ram rien a voir dans l'histoire, on est pas sous Windows10 hein

non , bien sûr .on est pas sous w$ .

croutons a écrit :

faudrait voir dans les fichiers log la différence des messages entre le noyau qui fonctionne et les autres

peut être ceci pour commencer :
distribution :

lsb_release -a 

version de la distribution :

cat /etc/*version

noyau :

uname -a 

retours du noyau : (pour les erreurs critiques)

dmesg -l crit | tail -n 100

retours du noyau : (pour les erreurs courantes)

dmesg -l err | tail -n 100

"syslog" (les 100 dernières lignes)

cat /var/log/syslog | tail -n 100

"messages" (les 100 dernières lignes)

cat /var/log/messages | tail -n 100

journalctl :
erreurs critiques :

journalctl -r -p crit | tail -n 100

erreurs classiques :

journalctl -r -p err | tail -n 100

Dernière modification par Debian Alain (08-12-2020 13:56:44)

raleur · 08-12-2020 10:41:58

Debian Alain a écrit :

ben 600 -700 Mo pour travailler , c'est pas beaucoup

Ou vois-tu 600-700 Mo pour travailler ?

Debian Alain · 08-12-2020 10:52:50

là :

# free -h
total used free shared buff/cache available
Mem: 6,5Gi 3,5Gi 697Mi 321Mi 2,3Gi 2,4Gi
Swap: 7,6Gi 0B 7,6Gi

raleur · 08-12-2020 11:01:58

Ce n'est que la quantité de mémoire libre (inutilisée). Une gestion efficace de la mémoire ne doit pas en laisser beaucoup, car la mémoire inutilisée est de la mémoire gaspillée.
Il faut plutôt regarder la colonne "available" (disponible), qui inclut la mémoire occupée par divers caches qui peut être libérée assez rapidement (mais faut pas rêver, "disponible" ne signifie pas forcément libérable sans dégrader la réactivité du système).
Un bon indicateur que la mémoire est suffisante est que le swap n'est pas utilisé.

Debian Alain · 08-12-2020 11:09:39

râleur a écrit :

Un bon indicateur que la mémoire est suffisante est que le swap n'est pas utilisé.

oui , j' y ai pensé . mais sans confirmation , je ne me suis pas avancé là dessus .

madiwas · 08-12-2020 13:53:51

Re-

Mon problème ne vient pas du manque de RAM... voici les informations demandées dont certaines sont déjà dans le corps de ma demande

:

lsb_release -a

No LSB modules are available.

Distributor ID: Debian

Description:  Debian GNU/Linux 10 (buster)

Release:  10

Codename: buster

cat /etc/*version

10.7

uname -a 

Linux sun 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) x86_64 GNU/Linux

dmesg -l crit | tail -n 100

n’affiche rien

dmesg -l err | tail -n 100

[   75.258623] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error

[   75.258625] thinkpad_acpi: Error probing battery 2

[   75.258711] battery: extension failed to load: ThinkPad Battery Extension

[   76.936094] r8169 0000:09:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)

[   76.936100] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware

[   77.750421] sd 4:0:0:0: [sdc] No Caching mode page found

[   77.750426] sd 4:0:0:0: [sdc] Assuming drive cache: write through

cat /var/log/syslog | tail -n 100

[   75.258623] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error

[   75.258625] thinkpad_acpi: Error probing battery 2

[   75.258711] battery: extension failed to load: ThinkPad Battery Extension

[   76.936094] r8169 0000:09:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)

[   76.936100] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware

[   77.750421] sd 4:0:0:0: [sdc] No Caching mode page found

[   77.750426] sd 4:0:0:0: [sdc] Assuming drive cache: write through

root@sun:~# cat /var/log/syslog | tail -n 100

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5388] device (enp9s0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5486] policy: auto-activating connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5504] device (enp9s0): Activation: starting connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5507] device (enp9s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5513] manager: NetworkManager state is now CONNECTING

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5520] device (enp9s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5539] device (enp9s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5550] dhcp4 (enp9s0): activation: beginning transaction (timeout in 45 seconds)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5669] dhcp4 (enp9s0): dhclient started with pid 10710

Dec  8 10:57:47 sun avahi-daemon[1255]: Joining mDNS multicast group on interface enp9s0.IPv6 with address fe80::a9e:1ff:fe2e:3be5.

Dec  8 10:57:47 sun avahi-daemon[1255]: New relevant interface enp9s0.IPv6 for mDNS.

Dec  8 10:57:47 sun avahi-daemon[1255]: Registering new address record for fe80::a9e:1ff:fe2e:3be5 on enp9s0.*.

Dec  8 10:57:47 sun dhclient[10710]: DHCPREQUEST for 192.168.1.35 on enp9s0 to 255.255.255.255 port 67

Dec  8 10:57:47 sun dhclient[10710]: DHCPACK of 192.168.1.35 from 192.168.1.10

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6195] dhcp4 (enp9s0):   address 192.168.1.35

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6195] dhcp4 (enp9s0):   plen 24 (255.255.255.0)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   gateway 192.168.1.10

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   lease time 43200

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   nameserver '192.168.1.10'

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0): state changed unknown -> bound

Dec  8 10:57:47 sun avahi-daemon[1255]: Joining mDNS multicast group on interface enp9s0.IPv4 with address 192.168.1.35.

Dec  8 10:57:47 sun avahi-daemon[1255]: New relevant interface enp9s0.IPv4 for mDNS.

Dec  8 10:57:47 sun avahi-daemon[1255]: Registering new address record for 192.168.1.35 on enp9s0.IPv4.

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6212] device (enp9s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6240] device (enp9s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6244] device (enp9s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6251] manager: NetworkManager state is now CONNECTED_LOCAL

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6301] manager: NetworkManager state is now CONNECTED_SITE

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6303] policy: set 'DHCP' (enp9s0) as default for IPv4 routing and DNS

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6347] device (enp9s0): Activation: successful, device activated.

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6358] manager: NetworkManager state is now CONNECTED_GLOBAL

Dec  8 10:57:47 sun dhclient[10710]: bound to 192.168.1.35 -- renewal in 17804 seconds.

Dec  8 10:57:47 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=1258 comm="/usr/sbin/NetworkManager --no-daemon ")

Dec  8 10:57:47 sun systemd[1]: Starting Network Manager Script Dispatcher Service...

Dec  8 10:57:47 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'

Dec  8 10:57:47 sun systemd[1]: Started Network Manager Script Dispatcher Service.

Dec  8 10:57:47 sun nm-dispatcher: req:1 'up' [enp9s0]: new request (1 scripts)

Dec  8 10:57:47 sun nm-dispatcher: req:1 'up' [enp9s0]: start running ordered scripts...

Dec  8 10:57:47 sun nm-dispatcher: req:2 'connectivity-change': new request (1 scripts)

Dec  8 10:57:47 sun nm-dispatcher: req:2 'connectivity-change': start running ordered scripts...

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:49 sun avahi-daemon[1255]: Leaving mDNS multicast group on interface enp9s0.IPv6 with address fe80::a9e:1ff:fe2e:3be5.

Dec  8 10:57:49 sun avahi-daemon[1255]: Joining mDNS multicast group on interface enp9s0.IPv6 with address 2a01:e35:2ff3:d080:a9e:1ff:fe2e:3be5.

Dec  8 10:57:49 sun avahi-daemon[1255]: Registering new address record for 2a01:e35:2ff3:d080:a9e:1ff:fe2e:3be5 on enp9s0.*.

Dec  8 10:57:49 sun NetworkManager[1258]: <info>  [1607421469.2783] policy: set 'DHCP' (enp9s0) as default for IPv6 routing and DNS

Dec  8 10:57:49 sun avahi-daemon[1255]: Withdrawing address record for fe80::a9e:1ff:fe2e:3be5 on enp9s0.

Dec  8 10:57:50 sun avahi-daemon[1255]: Registering new address record for 2a01:e35:2ff3:d080:a1bf:68a5:b6f:38d5 on enp9s0.*.

Dec  8 10:57:58 sun systemd[1]: NetworkManager-dispatcher.service: Succeeded.

Dec  8 11:02:09 sun smartd[1254]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 71 to 72

Dec  8 11:17:01 sun CRON[10928]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 11:30:01 sun CRON[10982]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 11:32:09 sun smartd[1254]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 72 to 71

Dec  8 11:33:51 sun systemd[1]: Started Run anacron jobs.

Dec  8 11:33:51 sun anacron[11005]: Anacron 2.3 started on 2020-12-08

Dec  8 11:33:51 sun anacron[11005]: Normal exit (0 jobs run)

Dec  8 11:33:51 sun systemd[1]: anacron.service: Succeeded.

Dec  8 11:54:35 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.560' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 11:54:35 sun systemd[1]: Starting Hostname Service...

Dec  8 11:54:35 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 11:54:35 sun systemd[1]: Started Hostname Service.

Dec  8 11:55:32 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 12:02:09 sun smartd[1254]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 63 to 61

Dec  8 12:14:07 sun kernel: [19043.747543] perf: interrupt took too long (6263 > 6257), lowering kernel.perf_event_max_sample_rate to 31750

Dec  8 12:17:01 sun CRON[11355]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 12:30:01 sun CRON[11419]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 12:32:09 sun smartd[1254]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 61 to 62

Dec  8 12:33:51 sun systemd[1]: Started Run anacron jobs.

Dec  8 12:33:51 sun anacron[11437]: Anacron 2.3 started on 2020-12-08

Dec  8 12:33:51 sun anacron[11437]: Normal exit (0 jobs run)

Dec  8 12:33:51 sun systemd[1]: anacron.service: Succeeded.

Dec  8 12:58:02 sun Tor[1475]: Heartbeat: Tor's uptime is 5:59 hours, with 0 circuits open. I've sent 112 kB and received 509 kB.

Dec  8 12:58:02 sun Tor[1475]: Average packaged cell fullness: 76.908%. TLS write overhead: 6%

Dec  8 13:02:18 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.565' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 13:02:18 sun systemd[1]: Starting Hostname Service...

Dec  8 13:02:18 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 13:02:18 sun systemd[1]: Started Hostname Service.

Dec  8 13:02:48 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 13:03:51 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:03:51 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:03 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:03 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:10 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:10 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:14 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:14 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:17:01 sun CRON[11943]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 13:28:29 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service' requested by ':1.572' (uid=1000 pid=12046 comm="/usr/lib/chromium/chromium --show-component-extens")

Dec  8 13:28:29 sun systemd[1]: Condition check resulted in Bluetooth service being skipped.

Dec  8 13:30:01 sun CRON[12246]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 13:31:51 sun systemd[1]: Started Run anacron jobs.

Dec  8 13:31:51 sun anacron[12265]: Anacron 2.3 started on 2020-12-08

Dec  8 13:31:51 sun anacron[12265]: Normal exit (0 jobs run)

Dec  8 13:31:51 sun systemd[1]: anacron.service: Succeeded.

cat /var/log/messages | tail -n 100

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5388] device (enp9s0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5486] policy: auto-activating connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5504] device (enp9s0): Activation: starting connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5507] device (enp9s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5513] manager: NetworkManager state is now CONNECTING

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5520] device (enp9s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5539] device (enp9s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5550] dhcp4 (enp9s0): activation: beginning transaction (timeout in 45 seconds)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5669] dhcp4 (enp9s0): dhclient started with pid 10710

Dec  8 10:57:47 sun avahi-daemon[1255]: Joining mDNS multicast group on interface enp9s0.IPv6 with address fe80::a9e:1ff:fe2e:3be5.

Dec  8 10:57:47 sun avahi-daemon[1255]: New relevant interface enp9s0.IPv6 for mDNS.

Dec  8 10:57:47 sun avahi-daemon[1255]: Registering new address record for fe80::a9e:1ff:fe2e:3be5 on enp9s0.*.

Dec  8 10:57:47 sun dhclient[10710]: DHCPREQUEST for 192.168.1.35 on enp9s0 to 255.255.255.255 port 67

Dec  8 10:57:47 sun dhclient[10710]: DHCPACK of 192.168.1.35 from 192.168.1.10

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6195] dhcp4 (enp9s0):   address 192.168.1.35

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6195] dhcp4 (enp9s0):   plen 24 (255.255.255.0)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   gateway 192.168.1.10

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   lease time 43200

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   nameserver '192.168.1.10'

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0): state changed unknown -> bound

Dec  8 10:57:47 sun avahi-daemon[1255]: Joining mDNS multicast group on interface enp9s0.IPv4 with address 192.168.1.35.

Dec  8 10:57:47 sun avahi-daemon[1255]: New relevant interface enp9s0.IPv4 for mDNS.

Dec  8 10:57:47 sun avahi-daemon[1255]: Registering new address record for 192.168.1.35 on enp9s0.IPv4.

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6212] device (enp9s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6240] device (enp9s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6244] device (enp9s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6251] manager: NetworkManager state is now CONNECTED_LOCAL

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6301] manager: NetworkManager state is now CONNECTED_SITE

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6303] policy: set 'DHCP' (enp9s0) as default for IPv4 routing and DNS

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6347] device (enp9s0): Activation: successful, device activated.

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6358] manager: NetworkManager state is now CONNECTED_GLOBAL

Dec  8 10:57:47 sun dhclient[10710]: bound to 192.168.1.35 -- renewal in 17804 seconds.

Dec  8 10:57:47 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=1258 comm="/usr/sbin/NetworkManager --no-daemon ")

Dec  8 10:57:47 sun systemd[1]: Starting Network Manager Script Dispatcher Service...

Dec  8 10:57:47 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'

Dec  8 10:57:47 sun systemd[1]: Started Network Manager Script Dispatcher Service.

Dec  8 10:57:47 sun nm-dispatcher: req:1 'up' [enp9s0]: new request (1 scripts)

Dec  8 10:57:47 sun nm-dispatcher: req:1 'up' [enp9s0]: start running ordered scripts...

Dec  8 10:57:47 sun nm-dispatcher: req:2 'connectivity-change': new request (1 scripts)

Dec  8 10:57:47 sun nm-dispatcher: req:2 'connectivity-change': start running ordered scripts...

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:47 sun gvfsd[2247]: mkdir failed on directory /var/cache/samba: Permission non accordée

Dec  8 10:57:49 sun avahi-daemon[1255]: Leaving mDNS multicast group on interface enp9s0.IPv6 with address fe80::a9e:1ff:fe2e:3be5.

Dec  8 10:57:49 sun avahi-daemon[1255]: Joining mDNS multicast group on interface enp9s0.IPv6 with address 2a01:e35:2ff3:d080:a9e:1ff:fe2e:3be5.

Dec  8 10:57:49 sun avahi-daemon[1255]: Registering new address record for 2a01:e35:2ff3:d080:a9e:1ff:fe2e:3be5 on enp9s0.*.

Dec  8 10:57:49 sun NetworkManager[1258]: <info>  [1607421469.2783] policy: set 'DHCP' (enp9s0) as default for IPv6 routing and DNS

Dec  8 10:57:49 sun avahi-daemon[1255]: Withdrawing address record for fe80::a9e:1ff:fe2e:3be5 on enp9s0.

Dec  8 10:57:50 sun avahi-daemon[1255]: Registering new address record for 2a01:e35:2ff3:d080:a1bf:68a5:b6f:38d5 on enp9s0.*.

Dec  8 10:57:58 sun systemd[1]: NetworkManager-dispatcher.service: Succeeded.

Dec  8 11:02:09 sun smartd[1254]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 71 to 72

Dec  8 11:17:01 sun CRON[10928]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 11:30:01 sun CRON[10982]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 11:32:09 sun smartd[1254]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 72 to 71

Dec  8 11:33:51 sun systemd[1]: Started Run anacron jobs.

Dec  8 11:33:51 sun anacron[11005]: Anacron 2.3 started on 2020-12-08

Dec  8 11:33:51 sun anacron[11005]: Normal exit (0 jobs run)

Dec  8 11:33:51 sun systemd[1]: anacron.service: Succeeded.

Dec  8 11:54:35 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.560' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 11:54:35 sun systemd[1]: Starting Hostname Service...

Dec  8 11:54:35 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 11:54:35 sun systemd[1]: Started Hostname Service.

Dec  8 11:55:32 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 12:02:09 sun smartd[1254]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 63 to 61

Dec  8 12:14:07 sun kernel: [19043.747543] perf: interrupt took too long (6263 > 6257), lowering kernel.perf_event_max_sample_rate to 31750

Dec  8 12:17:01 sun CRON[11355]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 12:30:01 sun CRON[11419]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 12:32:09 sun smartd[1254]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 61 to 62

Dec  8 12:33:51 sun systemd[1]: Started Run anacron jobs.

Dec  8 12:33:51 sun anacron[11437]: Anacron 2.3 started on 2020-12-08

Dec  8 12:33:51 sun anacron[11437]: Normal exit (0 jobs run)

Dec  8 12:33:51 sun systemd[1]: anacron.service: Succeeded.

Dec  8 12:58:02 sun Tor[1475]: Heartbeat: Tor's uptime is 5:59 hours, with 0 circuits open. I've sent 112 kB and received 509 kB.

Dec  8 12:58:02 sun Tor[1475]: Average packaged cell fullness: 76.908%. TLS write overhead: 6%

Dec  8 13:02:18 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.565' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 13:02:18 sun systemd[1]: Starting Hostname Service...

Dec  8 13:02:18 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 13:02:18 sun systemd[1]: Started Hostname Service.

Dec  8 13:02:48 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 13:03:51 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:03:51 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:03 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:03 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:10 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:10 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:14 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:14 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:17:01 sun CRON[11943]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 13:28:29 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service' requested by ':1.572' (uid=1000 pid=12046 comm="/usr/lib/chromium/chromium --show-component-extens")

Dec  8 13:28:29 sun systemd[1]: Condition check resulted in Bluetooth service being skipped.

Dec  8 13:30:01 sun CRON[12246]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 13:31:51 sun systemd[1]: Started Run anacron jobs.

Dec  8 13:31:51 sun anacron[12265]: Anacron 2.3 started on 2020-12-08

Dec  8 13:31:51 sun anacron[12265]: Normal exit (0 jobs run)

Dec  8 13:31:51 sun systemd[1]: anacron.service: Succeeded.

root@sun:~# cat /var/log/messages | tail -n 100

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5380] device (enp9s0): Activation: starting connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5388] device (enp9s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5397] device (enp9s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5405] device (enp9s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5410] dhcp4 (enp9s0): activation: beginning transaction (timeout in 45 seconds)

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5432] dhcp4 (enp9s0): dhclient started with pid 6264

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5949] dhcp4 (enp9s0):   address 192.168.1.35

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5949] dhcp4 (enp9s0):   plen 24 (255.255.255.0)

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5949] dhcp4 (enp9s0):   gateway 192.168.1.10

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5950] dhcp4 (enp9s0):   lease time 43200

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5950] dhcp4 (enp9s0):   nameserver '192.168.1.10'

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5950] dhcp4 (enp9s0): state changed unknown -> bound

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5966] device (enp9s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5976] device (enp9s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.5979] device (enp9s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.6119] policy: set 'DHCP' (enp9s0) as default for IPv4 routing and DNS

Dec  8 07:56:50 sun NetworkManager[1258]: <info>  [1607410610.6166] device (enp9s0): Activation: successful, device activated.

Dec  8 07:56:53 sun NetworkManager[1258]: <info>  [1607410613.2809] policy: set 'DHCP' (enp9s0) as default for IPv6 routing and DNS

Dec  8 08:02:14 sun kernel: [ 3930.926008] perf: interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 79250

Dec  8 08:04:44 sun org.kde.ActivityManager[2182]: Service started, version: 7.0.0

Dec  8 08:15:28 sun kernel: [ 4725.074288] wlp3s0: deauthenticating from 68:a3:78:8a:41:6e by local choice (Reason: 3=DEAUTH_LEAVING)

Dec  8 08:15:28 sun NetworkManager[1258]: <info>  [1607411728.2919] manager: rfkill: WiFi hardware radio set disabled

Dec  8 08:15:28 sun NetworkManager[1258]: <info>  [1607411728.2928] device (wlp3s0): state change: activated -> unavailable (reason 'none', sys-iface-state: 'managed')

Dec  8 08:15:28 sun NetworkManager[1258]: <info>  [1607411728.3263] dhcp4 (wlp3s0): canceled DHCP transaction, DHCP client pid 4743

Dec  8 08:15:28 sun NetworkManager[1258]: <info>  [1607411728.3264] dhcp4 (wlp3s0): state changed bound -> done

Dec  8 08:15:28 sun NetworkManager[1258]: <info>  [1607411728.3319] device (wlp3s0): set-hw-addr: set MAC address to 96:52:64:60:C6:5B (scanning)

Dec  8 08:15:28 sun NetworkManager[1258]: <info>  [1607411728.3571] audit: op="radio-control" arg="wireless-enabled" pid=2483 uid=1000 result="success"

Dec  8 08:15:28 sun NetworkManager[1258]: <info>  [1607411728.3585] manager: rfkill: WiFi now disabled by radio killswitch

Dec  8 08:17:47 sun kernel: [ 4864.168133] perf: interrupt took too long (3161 > 3151), lowering kernel.perf_event_max_sample_rate to 63250

Dec  8 08:26:21 sun WebKitNetworkProcess[6806]: Memory pressure relief: Total: res = 8499200/8654848/155648, res+swap = 3878912/3878912/0

Dec  8 08:26:21 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8691712/8712192/20480, res+swap = 3956736/3956736/0

Dec  8 08:26:21 sun WebKitNetworkProcess[6200]: Memory pressure relief: Total: res = 10792960/10813440/20480, res+swap = 6045696/6045696/0

Dec  8 08:30:35 sun WebKitNetworkProcess[6806]: Memory pressure relief: Total: res = 8638464/8642560/4096, res+swap = 3870720/3870720/0

Dec  8 08:30:35 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8671232/8675328/4096, res+swap = 3919872/3919872/0

Dec  8 08:30:35 sun WebKitNetworkProcess[6200]: Memory pressure relief: Total: res = 10772480/10776576/4096, res+swap = 6012928/6012928/0

Dec  8 08:31:50 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8675328/8675328/0, res+swap = 3919872/3919872/0

Dec  8 08:31:51 sun WebKitNetworkProcess[6200]: Memory pressure relief: Total: res = 10776576/10776576/0, res+swap = 6012928/6012928/0

Dec  8 08:31:51 sun WebKitNetworkProcess[6806]: Memory pressure relief: Total: res = 8642560/8642560/0, res+swap = 3870720/3870720/0

Dec  8 08:32:26 sun WebKitNetworkProcess[6200]: Memory pressure relief: Total: res = 10776576/10776576/0, res+swap = 6012928/6012928/0

Dec  8 08:32:31 sun WebKitNetworkProcess[6806]: Memory pressure relief: Total: res = 8642560/8642560/0, res+swap = 3870720/3870720/0

Dec  8 08:32:32 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8675328/8675328/0, res+swap = 3919872/3919872/0

Dec  8 08:33:09 sun WebKitNetworkProcess[6806]: Memory pressure relief: Total: res = 8642560/8642560/0, res+swap = 3870720/3870720/0

Dec  8 08:33:10 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8675328/8675328/0, res+swap = 3919872/3919872/0

Dec  8 08:33:10 sun WebKitNetworkProcess[6200]: Memory pressure relief: Total: res = 10776576/10776576/0, res+swap = 6012928/6012928/0

Dec  8 08:37:05 sun WebKitNetworkProcess[6806]: Memory pressure relief: Total: res = 8642560/8642560/0, res+swap = 3870720/3870720/0

Dec  8 08:37:05 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8675328/8675328/0, res+swap = 3919872/3919872/0

Dec  8 08:37:05 sun WebKitNetworkProcess[6200]: Memory pressure relief: Total: res = 10776576/10776576/0, res+swap = 6012928/6012928/0

Dec  8 08:38:07 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8675328/8675328/0, res+swap = 3919872/3919872/0

Dec  8 08:38:48 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8675328/8675328/0, res+swap = 3919872/3919872/0

Dec  8 08:41:24 sun WebKitNetworkProcess[6806]: Memory pressure relief: Total: res = 8642560/8642560/0, res+swap = 3870720/3870720/0

Dec  8 08:41:24 sun WebKitNetworkProcess[3294]: Memory pressure relief: Total: res = 8675328/8675328/0, res+swap = 3919872/3919872/0

Dec  8 08:41:25 sun WebKitNetworkProcess[6200]: Memory pressure relief: Total: res = 10776576/10776576/0, res+swap = 6012928/6012928/0

Dec  8 08:50:33 sun kernel: [ 6830.318459] perf: interrupt took too long (3977 > 3951), lowering kernel.perf_event_max_sample_rate to 50250

Dec  8 09:06:19 sun WebKitNetworkProcess[6200]: Memory pressure relief: Total: res = 10776576/10776576/0, res+swap = 6012928/6012928/0

Dec  8 09:26:14 sun kernel: [ 8970.869365] audit: type=1400 audit(1607415974.229:25): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/8297/mountinfo" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000

Dec  8 09:26:14 sun kernel: [ 8970.869527] audit: type=1400 audit(1607415974.229:26): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/8297/cgroup" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000

Dec  8 09:26:14 sun kernel: [ 8970.869565] audit: type=1400 audit(1607415974.229:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/memory/user.slice/user-1000.slice/session-2.scope/memory.use_hierarchy" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:14 sun kernel: [ 8970.869597] audit: type=1400 audit(1607415974.229:28): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/memory/user.slice/user-1000.slice/session-2.scope/memory.limit_in_bytes" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:14 sun kernel: [ 8970.869618] audit: type=1400 audit(1607415974.229:29): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/memory/user.slice/user-1000.slice/session-2.scope/memory.stat" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:14 sun kernel: [ 8970.871137] audit: type=1400 audit(1607415974.229:30): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.cfs_quota_us" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:14 sun kernel: [ 8970.871156] audit: type=1400 audit(1607415974.229:31): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.cfs_period_us" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:14 sun kernel: [ 8970.871173] audit: type=1400 audit(1607415974.229:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.shares" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:14 sun kernel: [ 8970.871196] audit: type=1400 audit(1607415974.229:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.cfs_quota_us" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:14 sun kernel: [ 8970.871212] audit: type=1400 audit(1607415974.229:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.cfs_period_us" pid=8297 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:41 sun kernel: [ 8998.363827] kauditd_printk_skb: 44 callbacks suppressed

Dec  8 09:26:41 sun kernel: [ 8998.363829] audit: type=1400 audit(1607416001.723:79): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/memory/user.slice/user-1000.slice/session-2.scope/memory.limit_in_bytes" pid=8297 comm=433120436F6D70696C657254687265 requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 09:26:41 sun kernel: [ 8998.364126] audit: type=1400 audit(1607416001.723:80): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/memory/user.slice/user-1000.slice/session-2.scope/memory.stat" pid=8297 comm=433120436F6D70696C657254687265 requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dec  8 10:03:49 sun kernel: [11225.779115] perf: interrupt took too long (5006 > 4971), lowering kernel.perf_event_max_sample_rate to 39750

Dec  8 10:56:58 sun kernel: [14414.443065] r8169 0000:09:00.0 enp9s0: Link is Down

Dec  8 10:57:04 sun NetworkManager[1258]: <info>  [1607421424.0804] device (enp9s0): state change: activated -> unavailable (reason 'carrier-changed', sys-iface-state: 'managed')

Dec  8 10:57:04 sun NetworkManager[1258]: <info>  [1607421424.1158] dhcp4 (enp9s0): canceled DHCP transaction, DHCP client pid 6264

Dec  8 10:57:04 sun NetworkManager[1258]: <info>  [1607421424.1159] dhcp4 (enp9s0): state changed bound -> done

Dec  8 10:57:04 sun NetworkManager[1258]: <info>  [1607421424.1338] manager: NetworkManager state is now DISCONNECTED

Dec  8 10:57:47 sun kernel: [14463.923486] r8169 0000:09:00.0 enp9s0: Link is Up - 1Gbps/Full - flow control rx/tx

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5376] device (enp9s0): carrier: link connected

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5388] device (enp9s0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5486] policy: auto-activating connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5504] device (enp9s0): Activation: starting connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5507] device (enp9s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5513] manager: NetworkManager state is now CONNECTING

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5520] device (enp9s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5539] device (enp9s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5550] dhcp4 (enp9s0): activation: beginning transaction (timeout in 45 seconds)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.5669] dhcp4 (enp9s0): dhclient started with pid 10710

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6195] dhcp4 (enp9s0):   address 192.168.1.35

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6195] dhcp4 (enp9s0):   plen 24 (255.255.255.0)

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   gateway 192.168.1.10

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   lease time 43200

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0):   nameserver '192.168.1.10'

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6196] dhcp4 (enp9s0): state changed unknown -> bound

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6212] device (enp9s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6240] device (enp9s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6244] device (enp9s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6251] manager: NetworkManager state is now CONNECTED_LOCAL

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6301] manager: NetworkManager state is now CONNECTED_SITE

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6303] policy: set 'DHCP' (enp9s0) as default for IPv4 routing and DNS

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6347] device (enp9s0): Activation: successful, device activated.

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6358] manager: NetworkManager state is now CONNECTED_GLOBAL

Dec  8 10:57:49 sun NetworkManager[1258]: <info>  [1607421469.2783] policy: set 'DHCP' (enp9s0) as default for IPv6 routing and DNS

Dec  8 12:14:07 sun kernel: [19043.747543] perf: interrupt took too long (6263 > 6257), lowering kernel.perf_event_max_sample_rate to 31750

/!\ pour rappelle, si je boote sur le premier kernel, mon PC ne démarre pas il laisse juste un curseur qui clignote comme s'il ne trouvait pas de disque dur... /!\ donc rien à voir avec la RAM si je puis me permettre.

Merci encore pour vos réponses, j'espère qu'une bonne proposition va passer ;-)

Croutons · 08-12-2020 14:19:53

ce sont les messages avec quel noyau?
en faite vu que ça freeze il faudrait que tu notes l'heure précise au moment ou tu boot avec le dernier noyau histoire de pouvoir retrouver les infos dans les fichiers log

Dernière modification par Croutons (08-12-2020 14:21:56)

madiwas · 08-12-2020 14:27:51

Merci Croutons pour ton message,

Toutes les informations communiquées sont à partir du kernel 4.19.0-6, impossible de booter sur les autres. je peux rebooter, mais j'ai pas trouvé grand chose dans les log, après je ne suis pas un expert juste un débutant confirmé ;-)

Quel log veux-tu voir ?

Debian Alain · 08-12-2020 14:40:43

sinon , pour dépanner , tu peux utiliser pastebinit ;
justement ,, pour faire un pastebin de tes commandes .
exemple :

df -h |pastebinit

https://paste.debian.net/1176070/

firefox https://paste.debian.net/1176070/

installation :

apt install --reinstall pastebinit 

je l'utilise facilement en user . sur mon bureau . jamais testé en recovery mode .
(n'oublie pas d'y relancer ta connexion. en recovery , il n'y a pas de connexion , faut la lancer à la main)

Dernière modification par Debian Alain (08-12-2020 14:44:12)

madiwas · 08-12-2020 14:46:24

Voici :

http://paste.debian.net/1176071/

Croutons · 08-12-2020 15:10:35

il y a des mises à jour a faire
regarde les éventuels erreurs

apt update 

apt upgrade

madiwas · 08-12-2020 21:30:29

Sorry

je ne m'attendais pas à ce retour

je passe apt update && apt upgrade tous les jours sur mon ThinkPad... et les MAJs suivantes ne passent pas :

virtualbox-dkms/inconnu 6.1.16-dfsg-6~~bpo10+1 amd64 [pouvant être mis à jour depuis : 6.1.10-dfsg-1~~bpo10+1]
virtualbox-qt/inconnu 6.1.16-dfsg-6~~bpo10+1 amd64 [pouvant être mis à jour depuis : 6.1.10-dfsg-1~~bpo10+1]
virtualbox/inconnu 6.1.16-dfsg-6~~bpo10+1 amd64 [pouvant être mis à jour depuis : 6.1.10-dfsg-1~~bpo10+1]

Mais ce n'est pas ma préoccupation première... j'aimerais beaucoup trouver une aide sur mon problème de boot

Debian Alain · 09-12-2020 08:38:56

peut être : ?

dpkg -l | grep -iE "linux-image-|linux-headers-"

sinon , sans grande conviction .
est ce que ceci pourrait t'aider ?

installation :

apt install --reinstall boot-info-script

lancement :

sudo bootinfoscript ~/Téléchargements/bootinfoscript.txt

exploitation :

cat -n ~/Téléchargements/bootinfoscript.txt 

si possible , copier coller l'intégralité du fichier ici 

éventuellement :

 cat -n ~/Téléchargements/bootinfoscript.txt | pastebinit

et copier / coller le résultat ici (la ligne de réponse de pastebinit) 

sinon , tu as pensé faire du rangement dans ton /home ? il est plein ....

voire à sauvegarder ce qui peut l'être et / ou effacer ce que tu peux ....

Dernière modification par Debian Alain (09-12-2020 08:55:19)

madiwas · 09-12-2020 09:20:09

Bonjour Alain,

Voici ce que me retourne ta commande :

dpkg -l | grep -iE "linux-image-|linux-headers-"

ii  linux-headers-4.19.0-12-amd64                 4.19.152-1                                   amd64        Header files for Linux 4.19.0-12-amd64

ii  linux-headers-4.19.0-12-common                4.19.152-1                                   all          Common header files for Linux 4.19.0-12

ii  linux-headers-4.19.0-13-amd64                 4.19.160-2                                   amd64        Header files for Linux 4.19.0-13-amd64

ii  linux-headers-4.19.0-13-common                4.19.160-2                                   all          Common header files for Linux 4.19.0-13

ii  linux-headers-4.19.0-6-all-amd64              4.19.67-2+deb10u2                            amd64        All header files for Linux 4.19 (meta-package)

ii  linux-headers-4.19.0-6-amd64                  4.19.67-2+deb10u2                            amd64        Header files for Linux 4.19.0-6-amd64

ii  linux-headers-4.19.0-6-cloud-amd64            4.19.67-2+deb10u2                            amd64        Header files for Linux 4.19.0-6-cloud-amd64

ri  linux-headers-4.19.0-6-common                 4.19.67-2+deb10u2                            all          Common header files for Linux 4.19.0-6

ii  linux-headers-4.19.0-6-common-rt              4.19.67-2+deb10u2                            all          Common header files for Linux 4.19.0-6-rt

ii  linux-headers-4.19.0-6-rt-amd64               4.19.67-2+deb10u2                            amd64        Header files for Linux 4.19.0-6-rt-amd64

ii  linux-headers-amd64                           4.19+105+deb10u8                             amd64        Header files for Linux amd64 configuration (meta-package)

rc  linux-image-4.19.0-10-amd64                   4.19.132-1                                   amd64        Linux 4.19 for 64-bit PCs (signed)

rc  linux-image-4.19.0-11-amd64                   4.19.146-1                                   amd64        Linux 4.19 for 64-bit PCs (signed)

ii  linux-image-4.19.0-12-amd64                   4.19.152-1                                   amd64        Linux 4.19 for 64-bit PCs (signed)

ii  linux-image-4.19.0-13-amd64                   4.19.160-2                                   amd64        Linux 4.19 for 64-bit PCs (signed)

ii  linux-image-4.19.0-6-amd64                    4.19.67-2+deb10u2                            amd64        Linux 4.19 for 64-bit PCs (signed)

rc  linux-image-4.19.0-8-amd64                    4.19.98-1+deb10u1                            amd64        Linux 4.19 for 64-bit PCs (signed)

rc  linux-image-4.19.0-9-amd64                    4.19.118-2+deb10u1                           amd64        Linux 4.19 for 64-bit PCs (signed)

ii  linux-image-amd64                             4.19+105+deb10u8                             amd64        Linux for 64-bit PCs (meta-package)

Pour le bootinfo =>

 more bootinfoscript.txt

                  Boot Info Script 0.77      [10 June 2018]

============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 

    the same hard drive for core.img. core.img is at this location and looks 

    for (,msdos1)/grub. It also embeds following components:

    modules

    ---------------------------------------------------------------------------

    fshelp ext2 part_msdos biosdisk

    ---------------------------------------------------------------------------

sdb1: __________________________________________________________________________

    File system:       ext4

    Boot sector type:  -

    Boot sector info: 

    Operating System:  

    Boot files:        /grub/grub.cfg /grub/i386-pc/core.img

sdb2: __________________________________________________________________________

    File system:       Extended Partition

    Boot sector type:  Unknown

    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       crypto_LUKS

    Boot sector type:  Unknown

    Boot sector info: 

sda: ___________________________________________________________________________

    File system:       crypto_LUKS

    Boot sector type:  Unknown

    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sdb _____________________________________________________________________

Disque /dev/sdb : 238,5 GiB, 256060514304 octets, 500118192 secteurs

Modèle de disque : SanDisk SD6SF1M2

Unités : secteur de 1 × 512 = 512 octets

Taille de secteur (logique / physique) : 512 octets / 512 octets

taille d'E/S (minimale / optimale) : 512 octets / 512 octets

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048     3,905,535     3,903,488  83 Linux

/dev/sdb2           3,907,582   500,117,503   496,209,922   5 Extended

/dev/sdb5           3,907,584   500,117,503   496,209,920  83 Linux

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/mapper/myData b5c49846-320e-4958-b6a2-2b5a512bb62e   ext4       data

/dev/mapper/sda5_crypt 4BkGwy-yjnA-UlR8-cD3w-MKpB-oTFc-PTEERe LVM2_member 

/dev/mapper/sun-home b256cc44-e0cd-4431-bf63-3ff85909ac54   ext4       

/dev/mapper/sun-racine 0448d7b6-190d-40fe-957a-801b0f01e42d   ext4       

/dev/mapper/sun-swap 592ba59c-a874-47f9-b9e4-9139b621dc26   swap       

/dev/sda         241a19a5-63ed-450f-92c3-b4b0bf4da9bd   crypto_LUKS 

/dev/sdb1        463f49ef-a972-4c1e-a652-65301e50cdcc   ext4       

/dev/sdb5        41c6d7b8-6f24-41da-970a-28f45b973573   crypto_LUKS 

========================= "ls -l /dev/disk/by-id" output: ======================

total 0

lrwxrwxrwx 1 root root  9 déc.   8 14:34 ata-Samsung_SSD_850_PRO_512GB_S250NXAG911749J -> ../../sda

lrwxrwxrwx 1 root root  9 déc.   8 14:34 ata-SanDisk_SD6SF1M256GG56_133959400468 -> ../../sdb

lrwxrwxrwx 1 root root 10 déc.   8 14:34 ata-SanDisk_SD6SF1M256GG56_133959400468-part1 -> ../../sdb1

lrwxrwxrwx 1 root root 10 déc.   8 14:34 ata-SanDisk_SD6SF1M256GG56_133959400468-part2 -> ../../sdb2

lrwxrwxrwx 1 root root 10 déc.   8 14:34 ata-SanDisk_SD6SF1M256GG56_133959400468-part5 -> ../../sdb5

lrwxrwxrwx 1 root root 10 déc.   8 14:36 dm-name-myData -> ../../dm-4

lrwxrwxrwx 1 root root 10 déc.   8 14:34 dm-name-sda5_crypt -> ../../dm-0

lrwxrwxrwx 1 root root 10 déc.   8 14:34 dm-name-sun-home -> ../../dm-3

lrwxrwxrwx 1 root root 10 déc.   8 14:34 dm-name-sun-racine -> ../../dm-1

lrwxrwxrwx 1 root root 10 déc.   8 14:34 dm-name-sun-swap -> ../../dm-2

lrwxrwxrwx 1 root root 10 déc.   8 14:36 dm-uuid-CRYPT-LUKS2-241a19a563ed450f92c3b4b0bf4da9bd-myData -> ../../dm-4

lrwxrwxrwx 1 root root 10 déc.   8 14:34 dm-uuid-CRYPT-LUKS2-41c6d7b86f2441da970a28f45b973573-sda5_crypt -> ../../dm-0

lrwxrwxrwx 1 root root 10 déc.   8 14:34 dm-uuid-LVM-9i2DuK4vaOp37jnhb4C6H7xErd9Gf8o6Dad1ecsoNLVCOZLN7fIV440e6E12H8yP -> ../../dm-3

lrwxrwxrwx 1 root root 10 déc.   8 14:34 dm-uuid-LVM-9i2DuK4vaOp37jnhb4C6H7xErd9Gf8o6JNweKLsZMgFDovjf6it5McaYqkJX3Vyz -> ../../dm-1

lrwxrwxrwx 1 root root 10 déc.   8 14:34 dm-uuid-LVM-9i2DuK4vaOp37jnhb4C6H7xErd9Gf8o6swgojG7ZJbbR5COq8ViaYj32EQ5lA1m4 -> ../../dm-2

lrwxrwxrwx 1 root root 10 déc.   8 14:34 lvm-pv-uuid-4BkGwy-yjnA-UlR8-cD3w-MKpB-oTFc-PTEERe -> ../../dm-0

lrwxrwxrwx 1 root root  9 déc.   8 14:34 wwn-0x5001b44a3c2f3814 -> ../../sdb

lrwxrwxrwx 1 root root 10 déc.   8 14:34 wwn-0x5001b44a3c2f3814-part1 -> ../../sdb1

lrwxrwxrwx 1 root root 10 déc.   8 14:34 wwn-0x5001b44a3c2f3814-part2 -> ../../sdb2

lrwxrwxrwx 1 root root 10 déc.   8 14:34 wwn-0x5001b44a3c2f3814-part5 -> ../../sdb5

lrwxrwxrwx 1 root root  9 déc.   8 14:34 wwn-0x500253884009b8cd -> ../../sda

========================= "ls -R /dev/mapper/" output: =========================

/dev/mapper:

control

myData

sda5_crypt

sun-home

sun-racine

sun-swap

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/mapper/myData /home/madiwas/myData     ext4       (rw,relatime)

/dev/mapper/sun-home /home                    ext4       (rw,relatime)

/dev/mapper/sun-racine /                        ext4       (rw,relatime,errors=remount-ro)

/dev/sdb1        /boot                    ext4       (rw,relatime)

============================= sdb1/grub/grub.cfg: ==============================

--------------------------------------------------------------------------------

#

# DO NOT EDIT THIS FILE

#

# It is automatically generated by grub-mkconfig using templates

# from /etc/grub.d and settings from /etc/default/grub

#

### BEGIN /etc/grub.d/00_header ###

if [ -s $prefix/grubenv ]; then

  set have_grubenv=true

  load_env

fi

if [ "${next_entry}" ] ; then

   set default="${next_entry}"

   set next_entry=

   save_env next_entry

   set boot_once=true

else

   set default="0"

fi

if [ x"${feature_menuentry_id}" = xy ]; then

  menuentry_id_option="--id"

else

  menuentry_id_option=""

fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then

  set saved_entry="${prev_saved_entry}"

  save_env saved_entry

  set prev_saved_entry=

  save_env prev_saved_entry

  set boot_once=true

fi

function savedefault {

  if [ -z "${boot_once}" ]; then

    saved_entry="${chosen}"

    save_env saved_entry

  fi

}

function load_video {

  if [ x$feature_all_video_module = xy ]; then

    insmod all_video

  else

    insmod efi_gop

    insmod efi_uga

    insmod ieee1275_fb

    insmod vbe

    insmod vga

    insmod video_bochs

    insmod video_cirrus

  fi

}

if [ x$feature_default_font_path = xy ] ; then

   font=unicode

else

insmod lvm

insmod ext2

set root='lvmid/9i2DuK-4vaO-p37j-nhb4-C6H7-xErd-9Gf8o6/JNweKL-sZMg-FDov-jf6i-t5Mc-aYqk-JX3Vyz'

if [ x$feature_platform_search_hint = xy ]; then

  search --no-floppy --fs-uuid --set=root --hint='lvmid/9i2DuK-4vaO-p37j-nhb4-C6H7-xErd-9Gf8o6/JNweKL-sZMg-FDov-jf6i-t5Mc-aYqk-JX3Vyz'  0448d7b6-190d-40fe-957a-801b0f01e42d

else

  search --no-floppy --fs-uuid --set=root 0448d7b6-190d-40fe-957a-801b0f01e42d

fi

    font="/usr/share/grub/unicode.pf2"

fi

if loadfont $font ; then

  set gfxmode=auto

  load_video

  insmod gfxterm

  set locale_dir=$prefix/locale

  set lang=fr_FR

  insmod gettext

fi

terminal_output gfxterm

if [ "${recordfail}" = 1 ] ; then

  set timeout=30

else

  if [ x$feature_timeout_style = xy ] ; then

    set timeout_style=menu

    set timeout=5

  # Fallback normal timeout code in case the timeout_style feature is

  # unavailable.

  else

    set timeout=5

  fi

fi

### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###

insmod lvm

insmod ext2

set root='lvmid/9i2DuK-4vaO-p37j-nhb4-C6H7-xErd-9Gf8o6/JNweKL-sZMg-FDov-jf6i-t5Mc-aYqk-JX3Vyz'

if [ x$feature_platform_search_hint = xy ]; then

  search --no-floppy --fs-uuid --set=root --hint='lvmid/9i2DuK-4vaO-p37j-nhb4-C6H7-xErd-9Gf8o6/JNweKL-sZMg-FDov-jf6i-t5Mc-aYqk-JX3Vyz'  0448d7b6-190d-40fe-957a-801b0f01e42d

else

  search --no-floppy --fs-uuid --set=root 0448d7b6-190d-40fe-957a-801b0f01e42d

fi

insmod png

if background_image /usr/share/desktop-base/futureprototype-theme/grub/grub-4x3.png; then

  set color_normal=white/black

  set color_highlight=black/white

else

  set menu_color_normal=cyan/blue

  set menu_color_highlight=white/blue

fi

### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###

function gfxmode {

  set gfxpayload="${1}"

}

set linux_gfx_mode=

export linux_gfx_mode

menuentry 'Debian GNU/Linux' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0448d7b6-190d-40fe-957a-801b0f01e42d' {

  load_video

  insmod gzio

  if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

  insmod part_msdos

  insmod ext2

  set root='hd1,msdos1'

  if [ x$feature_platform_search_hint = xy ]; then

    search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  463f49ef-a972-4c1e-a652-65301e50cdcc

  else

    search --no-floppy --fs-uuid --set=root 463f49ef-a972-4c1e-a652-65301e50cdcc

  fi

  echo  'Chargement de Linux 4.19.0-13-amd64…'

  linux /vmlinuz-4.19.0-13-amd64 root=/dev/mapper/sun-racine ro  quiet

  echo  'Chargement du disque mémoire initial…'

  initrd  /initrd.img-4.19.0-13-amd64

}

submenu 'Options avancées pour Debian GNU/Linux' $menuentry_id_option 'gnulinux-advanced-0448d7b6-190d-40fe-957a-801b0f01e42d' {

  menuentry 'Debian GNU/Linux, avec Linux 4.19.0-13-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-13-amd64-advanced-0448d7b6-190d-40fe-957a-801b0f01e4

2d' {

    load_video

    insmod gzio

    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

    insmod part_msdos

    insmod ext2

    set root='hd1,msdos1'

    if [ x$feature_platform_search_hint = xy ]; then

      search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  463f49ef-a972-4c1e-a652-65301e50cdcc

    else

      search --no-floppy --fs-uuid --set=root 463f49ef-a972-4c1e-a652-65301e50cdcc

    fi

    echo  'Chargement de Linux 4.19.0-13-amd64…'

    linux /vmlinuz-4.19.0-13-amd64 root=/dev/mapper/sun-racine ro  quiet

    echo  'Chargement du disque mémoire initial…'

    initrd  /initrd.img-4.19.0-13-amd64

  }

  menuentry 'Debian GNU/Linux, with Linux 4.19.0-13-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-13-amd64-recovery-0448d7b6-190d-40fe

-957a-801b0f01e42d' {

    load_video

    insmod gzio

    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

    insmod part_msdos

    insmod ext2

    set root='hd1,msdos1'

    if [ x$feature_platform_search_hint = xy ]; then

      search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  463f49ef-a972-4c1e-a652-65301e50cdcc

    else

      search --no-floppy --fs-uuid --set=root 463f49ef-a972-4c1e-a652-65301e50cdcc

    fi

    echo  'Chargement de Linux 4.19.0-13-amd64…'

    linux /vmlinuz-4.19.0-13-amd64 root=/dev/mapper/sun-racine ro single 

    echo  'Chargement du disque mémoire initial…'

    initrd  /initrd.img-4.19.0-13-amd64

  }

  menuentry 'Debian GNU/Linux, avec Linux 4.19.0-12-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-12-amd64-advanced-0448d7b6-190d-40fe-957a-801b0f01e4

2d' {

    load_video

    insmod gzio

    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

    insmod part_msdos

    insmod ext2

    set root='hd1,msdos1'

    if [ x$feature_platform_search_hint = xy ]; then

      search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  463f49ef-a972-4c1e-a652-65301e50cdcc

    else

      search --no-floppy --fs-uuid --set=root 463f49ef-a972-4c1e-a652-65301e50cdcc

    fi

    echo  'Chargement de Linux 4.19.0-12-amd64…'

    linux /vmlinuz-4.19.0-12-amd64 root=/dev/mapper/sun-racine ro  quiet

    echo  'Chargement du disque mémoire initial…'

    initrd  /initrd.img-4.19.0-12-amd64

  }

  menuentry 'Debian GNU/Linux, with Linux 4.19.0-12-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-12-amd64-recovery-0448d7b6-190d-40fe

-957a-801b0f01e42d' {

    load_video

    insmod gzio

    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

    insmod part_msdos

    insmod ext2

    set root='hd1,msdos1'

    if [ x$feature_platform_search_hint = xy ]; then

      search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  463f49ef-a972-4c1e-a652-65301e50cdcc

    else

      search --no-floppy --fs-uuid --set=root 463f49ef-a972-4c1e-a652-65301e50cdcc

    fi

    echo  'Chargement de Linux 4.19.0-12-amd64…'

    linux /vmlinuz-4.19.0-12-amd64 root=/dev/mapper/sun-racine ro single 

    echo  'Chargement du disque mémoire initial…'

    initrd  /initrd.img-4.19.0-12-amd64

  }

  menuentry 'Debian GNU/Linux, avec Linux 4.19.0-6-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-6-amd64-advanced-0448d7b6-190d-40fe-957a-801b0f01e42d

' {

    load_video

    insmod gzio

    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

    insmod part_msdos

    insmod ext2

    set root='hd1,msdos1'

    if [ x$feature_platform_search_hint = xy ]; then

      search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  463f49ef-a972-4c1e-a652-65301e50cdcc

    else

      search --no-floppy --fs-uuid --set=root 463f49ef-a972-4c1e-a652-65301e50cdcc

    fi

    echo  'Chargement de Linux 4.19.0-6-amd64…'

    linux /vmlinuz-4.19.0-6-amd64 root=/dev/mapper/sun-racine ro  quiet

    echo  'Chargement du disque mémoire initial…'

    initrd  /initrd.img-4.19.0-6-amd64

  }

  menuentry 'Debian GNU/Linux, with Linux 4.19.0-6-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.19.0-6-amd64-recovery-0448d7b6-190d-40fe-9

57a-801b0f01e42d' {

    load_video

    insmod gzio

    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi

    insmod part_msdos

    insmod ext2

    set root='hd1,msdos1'

    if [ x$feature_platform_search_hint = xy ]; then

      search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  463f49ef-a972-4c1e-a652-65301e50cdcc

    else

      search --no-floppy --fs-uuid --set=root 463f49ef-a972-4c1e-a652-65301e50cdcc

    fi

    echo  'Chargement de Linux 4.19.0-6-amd64…'

    linux /vmlinuz-4.19.0-6-amd64 root=/dev/mapper/sun-racine ro single 

    echo  'Chargement du disque mémoire initial…'

    initrd  /initrd.img-4.19.0-6-amd64

  }

}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###

### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###

# This file provides an easy way to add custom menu entries.  Simply type the

# menu entries you want to add after this comment.  Be careful not to change

# the 'exec tail' line above.

### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###

if [ -f  ${config_directory}/custom.cfg ]; then

  source ${config_directory}/custom.cfg

elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then

  source $prefix/custom.cfg;

fi

### END /etc/grub.d/41_custom ###

--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   0.168949127 = 0.181407744    grub/grub.cfg                                  2

   0.157005310 = 0.168583168    grub/i386-pc/core.img                          1

   0.224639893 = 0.241205248    vmlinuz-4.19.0-12-amd64                        2

   0.173862457 = 0.186683392    vmlinuz-4.19.0-13-amd64                        2

   0.146507263 = 0.157310976    vmlinuz-4.19.0-6-amd64                         1

   0.326225281 = 0.350281728    initrd.img-4.19.0-12-amd64                     1

   0.402149200 = 0.431804416    initrd.img-4.19.0-13-amd64                     4

   0.258190155 = 0.277229568    initrd.img-4.19.0-6-amd64                      3

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sdb2

00000000  49 6d 70 6c 49 4e 53 5f  32 38 41 53 61 6e 53 74  |ImplINS_28ASanSt|

00000010  61 63 6b 56 61 72 69 61  62 6c 65 44 65 73 63 72  |ackVariableDescr|

00000020  69 70 74 69 6f 6e 45 45  45 00 5f 5a 4e 4b 34 6c  |iptionEEE._ZNK4l|

00000030  6c 76 6d 31 39 41 52 4d  41 73 6d 42 61 63 6b 65  |lvm19ARMAsmBacke|

00000040  6e 64 44 61 72 77 69 6e  32 39 67 65 6e 65 72 61  |ndDarwin29genera|

00000050  74 65 43 6f 6d 70 61 63  74 55 6e 77 69 6e 64 45  |teCompactUnwindE|

00000060  6e 63 6f 64 69 6e 67 45  4e 53 5f 38 41 72 72 61  |ncodingENS_8Arra|

00000070  79 52 65 66 49 4e 53 5f  31 36 4d 43 43 46 49 49  |yRefINS_16MCCFII|

00000080  6e 73 74 72 75 63 74 69  6f 6e 45 45 45 00 5f 5a  |nstructionEEE._Z|

00000090  4e 34 6c 6c 76 6d 32 34  4c 6f 6f 70 56 65 63 74  |N4llvm24LoopVect|

000000a0  6f 72 69 7a 61 74 69 6f  6e 50 6c 61 6e 6e 65 72  |orizationPlanner|

000000b0  33 32 63 6f 6c 6c 65 63  74 54 72 69 76 69 61 6c  |32collectTrivial|

000000c0  6c 79 44 65 61 64 49 6e  73 74 72 75 63 74 69 6f  |lyDeadInstructio|

000000d0  6e 73 45 52 4e 53 5f 31  35 53 6d 61 6c 6c 50 74  |nsERNS_15SmallPt|

000000e0  72 53 65 74 49 6d 70 6c  49 50 4e 53 5f 31 31 49  |rSetImplIPNS_11I|

000000f0  6e 73 74 72 75 63 74 69  6f 6e 45 45 45 00 5f 5a  |nstructionEEE._Z|

00000100  4e 34 6c 6c 76 6d 31 39  56 50 6c 61 6e 48 43 46  |N4llvm19VPlanHCF|

00000110  47 54 72 61 6e 73 66 6f  72 6d 73 32 35 56 50 49  |GTransforms25VPI|

00000120  6e 73 74 72 75 63 74 69  6f 6e 73 54 6f 56 50 52  |nstructionsToVPR|

00000130  65 63 69 70 65 73 45 52  53 74 31 30 75 6e 69 71  |ecipesERSt10uniq|

00000140  75 65 5f 70 74 72 49 4e  53 5f 35 56 50 6c 61 6e  |ue_ptrINS_5VPlan|

00000150  45 53 74 31 34 64 65 66  61 75 6c 74 5f 64 65 6c  |ESt14default_del|

00000160  65 74 65 49 53 32 5f 45  45 50 4e 53 5f 39 4d 61  |eteIS2_EEPNS_9Ma|

00000170  70 56 65 63 74 6f 72 49  50 4e 53 5f 37 50 48 49  |pVectorIPNS_7PHI|

00000180  4e 6f 64 65 45 4e 53 5f  31 39 49 6e 64 75 63 74  |NodeENS_19Induct|

00000190  69 6f 6e 44 65 73 63 72  69 70 74 6f 72 45 4e 53  |ionDescriptorENS|

000001a0  5f 38 44 65 6e 73 65 4d  61 70 49 53 39 5f 6a 4e  |_8DenseMapIS9_jN|

000001b0  53 5f 31 32 44 65 6e 73  65 4d 61 70 49 6e 00 3c  |S_12DenseMapIn.<|

000001c0  0a f3 83 fe ff ff 02 00  00 00 00 90 93 1d 00 00  |................|

000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|

00000200

Unknown BootLoader on sdb5

00000000  4c 55 4b 53 ba be 00 02  00 00 00 00 00 00 40 00  |LUKS..........@.|

00000010  00 00 00 00 00 00 00 0b  00 00 00 00 00 00 00 00  |................|

00000020  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

00000040  00 00 00 00 00 00 00 00  73 68 61 32 35 36 00 00  |........sha256..|

00000050  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

00000060  00 00 00 00 00 00 00 00  ef be 2f 17 45 0d 9d a0  |........../.E...|

00000070  47 25 d0 b2 70 12 f3 1e  3f 51 a3 f3 24 b2 dc 08  |G%..p...?Q..$...|

00000080  79 64 90 68 5a 5c 4a c8  0c 98 20 cd f5 9a b4 6b  |yd.hZ\J... ....k|

00000090  11 1a d9 80 7a 42 b7 50  86 e2 76 ba 9d 08 83 21  |....zB.P..v....!|

000000a0  1f fa b0 d2 03 9c 03 e5  34 31 63 36 64 37 62 38  |........41c6d7b8|

000000b0  2d 36 66 32 34 2d 34 31  64 61 2d 39 37 30 61 2d  |-6f24-41da-970a-|

000000c0  32 38 66 34 35 62 39 37  33 35 37 33 00 00 00 00  |28f45b973573....|

000000d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

000001c0  22 83 32 1b f6 81 c6 b9  88 98 72 26 a2 c4 73 29  |".2.......r&..s)|

000001d0  9e 78 4f 02 86 ad 1e aa  c9 c9 ec 63 07 3c a3 bb  |.xO........c.<..|

000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

00000200

Unknown BootLoader on sda

00000000  4c 55 4b 53 ba be 00 02  00 00 00 00 00 00 40 00  |LUKS..........@.|

00000010  00 00 00 00 00 00 00 0a  00 00 00 00 00 00 00 00  |................|

00000020  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

00000040  00 00 00 00 00 00 00 00  73 68 61 32 35 36 00 00  |........sha256..|

00000050  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

00000060  00 00 00 00 00 00 00 00  26 8e 84 b2 9d 4f b4 88  |........&....O..|

00000070  26 a6 a3 35 11 6d 4f 50  28 56 06 70 e9 e4 b4 6b  |&..5.mOP(V.p...k|

00000080  78 c2 38 3d 92 62 84 6e  dd e0 7c e2 2f 06 e5 55  |x.8=.b.n..|./..U|

00000090  07 98 d2 f1 24 5a 1f 5f  aa 92 25 5c ef 65 44 e9  |....$Z._..%\.eD.|

000000a0  9e fc 9f 7b 6e 0d 83 00  32 34 31 61 31 39 61 35  |...{n...241a19a5|

000000b0  2d 36 33 65 64 2d 34 35  30 66 2d 39 32 63 33 2d  |-63ed-450f-92c3-|

000000c0  62 34 62 30 62 66 34 64  61 39 62 64 00 00 00 00  |b4b0bf4da9bd....|

000000d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

000001c0  e7 07 a4 9a fc 45 ff 97  8e 56 f9 e4 ef a3 54 ef  |.....E...V....T.|

000001d0  42 a7 55 4f 43 76 b1 fe  52 73 0a c9 2f a2 83 be  |B.UOCv..Rs../...|

000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

*

00000200

=============================== StdErr Messages: ===============================

/usr/sbin/bootinfoscript: ligne 2553: 352223232S : valeur trop grande pour la base (le symbole erroné est « 352223232S »)

mdadm: No arrays found in config file or automatically

J'ai comme l'impression que ta dernière question va me rapprocher de la solution

Croutons · 09-12-2020 09:30:47

madiwas a écrit :

Quel log veux-tu voir ?

l'idée c'est d'avoir les logs d'un noyau qui plante
il te faut avoir une horloge avec affichage des secondes qui soit synchronisé sur le net comme ton ordi
un téléphone portable devrait faire l'affaire

tu démarres ton ordi sur le dernier noyau
Quand il freeze tu l'éteint et tu attend quelques minutes
tu redémarres sur le noyau qui fonctionne et tu copies colle les logs qui correspondent a l'heure que tu as noté
La commande less te permet de navigué dans les fichiers log avec les touches de direction , page down et page up
la lecture commence en début de fichier, le plus simple est de se positionner a la fin et de remonter (se sera moins long)
un appuie sur la touche Fin(a droite de la touche Suppr) permet un positionnement en fin de fichier

less /var/log/messages

less /var/log/syslog

le truc c'est de bien espacer les différentes actions de quelques minutes sinon tu ne te retrouvera pas car l'heure sera trop rapproché dans les fichiers log

Debian Alain · 09-12-2020 09:35:56

ce que je vois , c'est surtout une belle pagaille dans les headers du noyau 4.19.0-6

ii  linux-headers-4.19.0-6-all-amd64              4.19.67-2+deb10u2                            amd64        All header files for Linux 4.19 (meta-package)

ii  linux-headers-4.19.0-6-amd64                  4.19.67-2+deb10u2                            amd64        Header files for Linux 4.19.0-6-amd64

ii  linux-headers-4.19.0-6-cloud-amd64            4.19.67-2+deb10u2                            amd64        Header files for Linux 4.19.0-6-cloud-amd64

ri  linux-headers-4.19.0-6-common                 4.19.67-2+deb10u2                            all          Common header files for Linux 4.19.0-6

ii  linux-headers-4.19.0-6-common-rt              4.19.67-2+deb10u2                            all          Common header files for Linux 4.19.0-6-rt

ii  linux-headers-4.19.0-6-rt-amd64               4.19.67-2+deb10u2                            amd64        Header files for Linux 4.19.0-6-rt-amd64

ii  linux-headers-amd64                           4.19+105+deb10u8                             amd64        Header files for Linux amd64 configuration (meta-package)

si je pouvais savoir quels headers sont en service , je t'aurai volontiers aidé à faire du tri ....

je vois pas trop où çà nous mène , çà : all , cloud , rt ???

madiwas · 09-12-2020 09:48:17

Merci encore pour votre aide !

J'ai redémarré mon PC hier à 14h30, ce dernier est à l'heure via le NTP de univ-lyon1.fr...

Voici donc les extraits des deux fichiers de log demandés :

less /var/log/message

Dec  8 10:57:47 sun NetworkManager[1258]: <info>  [1607421467.6358] manager: NetworkManager state is now CONNECTED_GLOBAL

Dec  8 10:57:49 sun NetworkManager[1258]: <info>  [1607421469.2783] policy: set 'DHCP' (enp9s0) as default for IPv6 routing and DNS

Dec  8 12:14:07 sun kernel: [19043.747543] perf: interrupt took too long (6263 > 6257), lowering kernel.perf_event_max_sample_rate to 31750

Dec  8 14:34:31 sun kernel: [    0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)

Dec  8 14:34:31 sun kernel: [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=/dev/mapper/sun-racine ro quiet

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-provided physical RAM map:

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b065efff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000b065f000-0x00000000bae9efff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fdffffff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] NX (Execute Disable) protection: active

Dec  8 14:34:31 sun kernel: [    0.000000] SMBIOS 2.7 present.

Dec  8 14:34:31 sun kernel: [    0.000000] DMI: LENOVO 335337G/335337G, BIOS H6ETA0WW (2.18 ) 06/01/2018

Dec  8 14:34:31 sun kernel: [    0.000000] tsc: Fast TSC calibration using PIT

Dec  8 14:34:31 sun kernel: [    0.000000] tsc: Detected 1696.288 MHz processor

Dec  8 14:34:31 sun kernel: [    0.003070] last_pfn = 0x1fe000 max_arch_pfn = 0x400000000

Dec  8 14:34:31 sun kernel: [    0.004350] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  

Dec  8 14:34:31 sun kernel: [    0.004555] last_pfn = 0xb065f max_arch_pfn = 0x400000000

Dec  8 14:34:31 sun kernel: [    0.004760] found SMP MP-table at [mem 0x000f0100-0x000f010f]

Dec  8 14:34:31 sun kernel: [    0.005503] RAMDISK: [mem 0x3588d000-0x36c3dfff]

Dec  8 14:34:31 sun kernel: [    0.005508] ACPI: Early table checksum verification disabled

Dec  8 14:34:31 sun kernel: [    0.005586] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)

Dec  8 14:34:31 sun kernel: [    0.005592] ACPI: XSDT 0x00000000BAFFE170 0000A4 (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005599] ACPI: FACP 0x00000000BAFEB000 00010C (v05 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005608] ACPI: DSDT 0x00000000BAFED000 00E5E2 (v02 LENOVO IVB-CPT  00000000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.005613] ACPI: FACS 0x00000000BAF67000 000040

Dec  8 14:34:31 sun kernel: [    0.005617] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO TP-H6    00002180 PTL  00000001)

Dec  8 14:34:31 sun kernel: [    0.005622] ACPI: TCPA 0x00000000BAFFC000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)

Dec  8 14:34:31 sun kernel: [    0.005627] ACPI: ASF! 0x00000000BAFEC000 0000A5 (v32 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005632] ACPI: HPET 0x00000000BAFE9000 000038 (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005636] ACPI: APIC 0x00000000BAFE8000 000098 (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005640] ACPI: MCFG 0x00000000BAFE7000 00003C (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005645] ACPI: FPDT 0x00000000BAFE6000 000064 (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005649] ACPI: SSDT 0x00000000BAFE5000 0008A2 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.005654] ACPI: SSDT 0x00000000BAFE4000 000A92 (v01 PmRef  CpuPm    00003000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.005658] ACPI: DMAR 0x00000000BAFE3000 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)

Dec  8 14:34:31 sun kernel: [    0.005663] ACPI: UEFI 0x00000000BAFE2000 00003E (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005668] ACPI: UEFI 0x00000000BAFE1000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)

Dec  8 14:34:31 sun kernel: [    0.005672] ACPI: POAT 0x00000000BAFE0000 000055 (v03 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005677] ACPI: UEFI 0x00000000BAFDF000 0002BA (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005681] ACPI: DBG2 0x00000000BAFDE000 00006B (v00 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005807] No NUMA configuration found

Dec  8 14:34:31 sun kernel: [    0.005808] Faking a node at [mem 0x0000000000000000-0x00000001fdffffff]

Dec  8 14:34:31 sun kernel: [    0.005813] NODE_DATA(0) allocated [mem 0x1fdff8000-0x1fdffcfff]

Dec  8 14:34:31 sun kernel: [    0.005852] Zone ranges:

Dec  8 14:34:31 sun kernel: [    0.005854]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

Dec  8 14:34:31 sun kernel: [    0.005856]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

Dec  8 14:34:31 sun kernel: [    0.005857]   Normal   [mem 0x0000000100000000-0x00000001fdffffff]

Dec  8 14:34:31 sun kernel: [    0.005859]   Device   empty

Dec  8 14:34:31 sun kernel: [    0.005860] Movable zone start for each node

Dec  8 14:34:31 sun kernel: [    0.005861] Early memory node ranges

Dec  8 14:34:31 sun kernel: [    0.005862]   node   0: [mem 0x0000000000001000-0x000000000009cfff]

Dec  8 14:34:31 sun kernel: [    0.005863]   node   0: [mem 0x0000000000100000-0x000000001fffffff]

Dec  8 14:34:31 sun kernel: [    0.005864]   node   0: [mem 0x0000000020200000-0x0000000040003fff]

Dec  8 14:34:31 sun kernel: [    0.005865]   node   0: [mem 0x0000000040005000-0x00000000b065efff]

Dec  8 14:34:31 sun kernel: [    0.005866]   node   0: [mem 0x0000000100000000-0x00000001fdffffff]

Dec  8 14:34:31 sun kernel: [    0.005871] Reserved but unavailable: 100 pages

Dec  8 14:34:31 sun kernel: [    0.005873] Initmem setup node 0 [mem 0x0000000000001000-0x00000001fdffffff]

Dec  8 14:34:31 sun kernel: [    0.076859] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]

Dec  8 14:34:31 sun kernel: [    0.077130] ACPI: PM-Timer IO Port: 0x408

Dec  8 14:34:31 sun kernel: [    0.077143] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

Dec  8 14:34:31 sun kernel: [    0.077144] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

Dec  8 14:34:31 sun kernel: [    0.077157] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

Dec  8 14:34:31 sun kernel: [    0.077159] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

Dec  8 14:34:31 sun kernel: [    0.077162] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

Dec  8 14:34:31 sun kernel: [    0.077168] Using ACPI (MADT) for SMP configuration information

Dec  8 14:34:31 sun kernel: [    0.077170] ACPI: HPET id: 0x8086a301 base: 0xfed00000

Dec  8 14:34:31 sun kernel: [    0.077177] smpboot: Allowing 8 CPUs, 4 hotplug CPUs

Dec  8 14:34:31 sun kernel: [    0.077206] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

Dec  8 14:34:31 sun kernel: [    0.077209] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]

Dec  8 14:34:31 sun kernel: [    0.077210] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]

Dec  8 14:34:31 sun kernel: [    0.077211] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

Dec  8 14:34:31 sun kernel: [    0.077211] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

Dec  8 14:34:31 sun kernel: [    0.077214] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]

Dec  8 14:34:31 sun kernel: [    0.077216] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]

Dec  8 14:34:31 sun kernel: [    0.077218] PM: Registered nosave memory: [mem 0xb065f000-0xbae9efff]

Dec  8 14:34:31 sun kernel: [    0.077219] PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff]

Dec  8 14:34:31 sun kernel: [    0.077220] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]

Dec  8 14:34:31 sun kernel: [    0.077220] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff]

Dec  8 14:34:31 sun kernel: [    0.077221] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]

Dec  8 14:34:31 sun kernel: [    0.077222] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]

Dec  8 14:34:31 sun kernel: [    0.077223] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]

Dec  8 14:34:31 sun kernel: [    0.077224] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

Dec  8 14:34:31 sun kernel: [    0.077224] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]

Dec  8 14:34:31 sun kernel: [    0.077225] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]

Dec  8 14:34:31 sun kernel: [    0.077226] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]

Dec  8 14:34:31 sun kernel: [    0.077227] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]

Dec  8 14:34:31 sun kernel: [    0.077228] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]

Dec  8 14:34:31 sun kernel: [    0.077229] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]

Dec  8 14:34:31 sun kernel: [    0.077229] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]

Dec  8 14:34:31 sun kernel: [    0.077230] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

Dec  8 14:34:31 sun kernel: [    0.077231] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]

Dec  8 14:34:31 sun kernel: [    0.077232] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]

Dec  8 14:34:31 sun kernel: [    0.077234] [mem 0xbfa00000-0xf7ffffff] available for PCI devices

Dec  8 14:34:31 sun kernel: [    0.077236] Booting paravirtualized kernel on bare hardware

Dec  8 14:34:31 sun kernel: [    0.077239] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

Dec  8 14:34:31 sun kernel: [    0.250134] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0

Dec  8 14:34:31 sun kernel: [    0.250146] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1

Dec  8 14:34:31 sun kernel: [    0.250484] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144

Dec  8 14:34:31 sun kernel: [    0.250530] Built 1 zonelists, mobility grouping on.  Total pages: 1734739

Dec  8 14:34:31 sun kernel: [    0.250532] Policy zone: Normal

Dec  8 14:34:31 sun kernel: [    0.250534] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=/dev/mapper/sun-racine ro quiet

Dec  8 14:34:31 sun kernel: [    0.281488] Memory: 6824112K/7049192K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 225080K reserved, 0K cma-reserved)

Dec  8 14:34:31 sun kernel: [    0.281625] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

Dec  8 14:34:31 sun kernel: [    0.281633] Kernel/User page tables isolation: enabled

Dec  8 14:34:31 sun kernel: [    0.281695] ftrace: allocating 31872 entries in 125 pages

Dec  8 14:34:31 sun kernel: [    0.301553] rcu: Hierarchical RCU implementation.

Dec  8 14:34:31 sun kernel: [    0.301556] rcu:   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.

Dec  8 14:34:31 sun kernel: [    0.301557] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8

Dec  8 14:34:31 sun kernel: [    0.306556] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16

Dec  8 14:34:31 sun kernel: [    0.308536] Console: colour VGA+ 80x25

Dec  8 14:34:31 sun kernel: [    0.308543] console [tty0] enabled

Dec  8 14:34:31 sun kernel: [    0.308567] ACPI: Core revision 20180810

Dec  8 14:34:31 sun kernel: [    0.308925] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

Dec  8 14:34:31 sun kernel: [    0.308945] APIC: Switch to symmetric I/O mode setup

Dec  8 14:34:31 sun kernel: [    0.308947] DMAR: Host address width 36

Dec  8 14:34:31 sun kernel: [    0.308949] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

Dec  8 14:34:31 sun kernel: [    0.308955] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a

Dec  8 14:34:31 sun kernel: [    0.308956] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

Dec  8 14:34:31 sun kernel: [    0.308960] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a

Dec  8 14:34:31 sun kernel: [    0.308961] DMAR: RMRR base: 0x000000ba2ba000 end: 0x000000ba2d0fff

Dec  8 14:34:31 sun kernel: [    0.308965] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff

Dec  8 14:34:31 sun kernel: [    0.308967] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1

Dec  8 14:34:31 sun kernel: [    0.308968] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

Dec  8 14:34:31 sun kernel: [    0.308970] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.

Dec  8 14:34:31 sun kernel: [    0.309529] DMAR-IR: Enabled IRQ remapping in x2apic mode

Dec  8 14:34:31 sun kernel: [    0.309531] x2apic enabled

Dec  8 14:34:31 sun kernel: [    0.309539] Switched APIC routing to cluster x2apic.

Dec  8 14:34:31 sun kernel: [    0.310009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

Dec  8 14:34:31 sun kernel: [    0.328944] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1873749fe79, max_idle_ns: 440795217464 ns

Dec  8 14:34:31 sun kernel: [    0.328965] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.57 BogoMIPS (lpj=6785152)

Dec  8 14:34:31 sun kernel: [    0.328969] pid_max: default: 32768 minimum: 301

Dec  8 14:34:31 sun kernel: [    0.329013] Security Framework initialized

Dec  8 14:34:31 sun kernel: [    0.329014] Yama: disabled by default; enable with sysctl kernel.yama.*

Dec  8 14:34:31 sun kernel: [    0.329039] AppArmor: AppArmor initialized

Dec  8 14:34:31 sun kernel: [    0.330678] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

Dec  8 14:34:31 sun kernel: [    0.331511] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

Dec  8 14:34:31 sun kernel: [    0.331550] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.331578] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.331878] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

Dec  8 14:34:31 sun kernel: [    0.331879] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

Dec  8 14:34:31 sun kernel: [    0.331903] process: using mwait in idle threads

Dec  8 14:34:31 sun kernel: [    0.331906] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8

Dec  8 14:34:31 sun kernel: [    0.331908] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

Dec  8 14:34:31 sun kernel: [    0.331910] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

Dec  8 14:34:31 sun kernel: [    0.331911] Spectre V2 : Mitigation: Full generic retpoline

Dec  8 14:34:31 sun kernel: [    0.331912] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

Dec  8 14:34:31 sun kernel: [    0.331913] Spectre V2 : Enabling Restricted Speculation for firmware calls

Dec  8 14:34:31 sun kernel: [    0.331924] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

Dec  8 14:34:31 sun kernel: [    0.331925] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl

Dec  8 14:34:31 sun kernel: [    0.331926] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp

Dec  8 14:34:31 sun kernel: [    0.331969] MDS: Vulnerable: Clear CPU buffers attempted, no microcode

Dec  8 14:34:31 sun kernel: [    0.332245] Freeing SMP alternatives memory: 24K

Dec  8 14:34:31 sun kernel: [    0.337045] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)

Dec  8 14:34:31 sun kernel: [    0.337183] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.

Dec  8 14:34:31 sun kernel: [    0.337215] ... version:                3

Dec  8 14:34:31 sun kernel: [    0.337216] ... bit width:              48

Dec  8 14:34:31 sun kernel: [    0.337217] ... generic registers:      4

Dec  8 14:34:31 sun kernel: [    0.337218] ... value mask:             0000ffffffffffff

Dec  8 14:34:31 sun kernel: [    0.337218] ... max period:             00007fffffffffff

Dec  8 14:34:31 sun kernel: [    0.337219] ... fixed-purpose events:   3

Dec  8 14:34:31 sun kernel: [    0.337220] ... event mask:             000000070000000f

Dec  8 14:34:31 sun kernel: [    0.337272] rcu: Hierarchical SRCU implementation.

Dec  8 14:34:31 sun kernel: [    0.337804] random: crng done (trusting CPU's manufacturer)

Dec  8 14:34:31 sun kernel: [    0.338382] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

Dec  8 14:34:31 sun kernel: [    0.338476] smp: Bringing up secondary CPUs ...

Dec  8 14:34:31 sun kernel: [    0.338585] x86: Booting SMP configuration:

Dec  8 14:34:31 sun kernel: [    0.338587] .... node  #0, CPUs:      #1

Dec  8 14:34:31 sun kernel: [    0.341176] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.

Dec  8 14:34:31 sun kernel: [    0.341176]  #2 #3

Dec  8 14:34:31 sun kernel: [    0.345016] smp: Brought up 1 node, 4 CPUs

Dec  8 14:34:31 sun kernel: [    0.345016] smpboot: Max logical packages: 2

Dec  8 14:34:31 sun kernel: [    0.345016] smpboot: Total of 4 processors activated (13570.30 BogoMIPS)

Dec  8 14:34:31 sun kernel: [    0.349295] devtmpfs: initialized

Dec  8 14:34:31 sun kernel: [    0.349295] x86/mm: Memory block size: 128MB

Dec  8 14:34:31 sun kernel: [    0.349814] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)

Dec  8 14:34:31 sun kernel: [    0.349814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

Dec  8 14:34:31 sun kernel: [    0.349814] futex hash table entries: 2048 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.349814] pinctrl core: initialized pinctrl subsystem

Dec  8 14:34:31 sun kernel: [    0.349814] NET: Registered protocol family 16

Dec  8 14:34:31 sun kernel: [    0.349814] audit: initializing netlink subsys (disabled)

Dec  8 14:34:31 sun kernel: [    0.349814] audit: type=2000 audit(1607434403.040:1): state=initialized audit_enabled=0 res=1

Dec  8 14:34:31 sun kernel: [    0.349814] cpuidle: using governor ladder

Dec  8 14:34:31 sun kernel: [    0.349814] cpuidle: using governor menu

Dec  8 14:34:31 sun kernel: [    0.349814] ACPI: bus type PCI registered

Dec  8 14:34:31 sun kernel: [    0.349814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

Dec  8 14:34:31 sun kernel: [    0.349814] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)

Dec  8 14:34:31 sun kernel: [    0.349814] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820

Dec  8 14:34:31 sun kernel: [    0.349814] PCI: Using configuration type 1 for base access

Dec  8 14:34:31 sun kernel: [    0.349814] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

Dec  8 14:34:31 sun kernel: [    0.349814] mtrr: your CPUs had inconsistent variable MTRR settings

Dec  8 14:34:31 sun kernel: [    0.349814] mtrr: probably your BIOS does not setup all CPUs.

Dec  8 14:34:31 sun kernel: [    0.349814] mtrr: corrected configuration.

Dec  8 14:34:31 sun kernel: [    0.350035] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Module Device)

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Processor Device)

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(3.0 _SCP Extensions)

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Processor Aggregator Device)

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Linux-Dell-Video)

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

Dec  8 14:34:31 sun kernel: [    0.366943] ACPI: 3 ACPI AML tables successfully acquired and loaded

Dec  8 14:34:31 sun kernel: [    0.370623] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

Dec  8 14:34:31 sun kernel: [    0.371289] ACPI: Dynamic OEM Table Load:

Dec  8 14:34:31 sun kernel: [    0.371302] ACPI: SSDT 0xFFFF8ACEB50E4000 00096A (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.371889] ACPI: Dynamic OEM Table Load:

Dec  8 14:34:31 sun kernel: [    0.371897] ACPI: SSDT 0xFFFF8ACEB50C2C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.372291] ACPI: Dynamic OEM Table Load:

Dec  8 14:34:31 sun kernel: [    0.372298] ACPI: SSDT 0xFFFF8ACEB50CFA00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.373547] ACPI: EC: EC started

Dec  8 14:34:31 sun kernel: [    0.373548] ACPI: EC: interrupt blocked

Dec  8 14:34:31 sun kernel: [    0.809130] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC

Dec  8 14:34:31 sun kernel: [    0.809133] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62

Dec  8 14:34:31 sun kernel: [    0.809135] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions

Dec  8 14:34:31 sun kernel: [    0.809136] ACPI: Interpreter enabled

Dec  8 14:34:31 sun kernel: [    0.809172] ACPI: (supports S0 S3 S4 S5)

Dec  8 14:34:31 sun kernel: [    0.809173] ACPI: Using IOAPIC for interrupt routing

Dec  8 14:34:31 sun kernel: [    0.809212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

Dec  8 14:34:31 sun kernel: [    0.809572] ACPI: Enabled 7 GPEs in block 00 to 3F

Dec  8 14:34:31 sun kernel: [    0.819034] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])

Dec  8 14:34:31 sun kernel: [    0.819041] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

Dec  8 14:34:31 sun kernel: [    0.819219] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

Dec  8 14:34:31 sun kernel: [    0.819820] PCI host bridge to bus 0000:00

Dec  8 14:34:31 sun kernel: [    0.819823] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

Dec  8 14:34:31 sun kernel: [    0.819825] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

Dec  8 14:34:31 sun kernel: [    0.819827] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

Dec  8 14:34:31 sun kernel: [    0.819829] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]

Dec  8 14:34:31 sun kernel: [    0.819830] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]

Dec  8 14:34:31 sun kernel: [    0.819832] pci_bus 0000:00: root bus resource [bus 00-3e]

Dec  8 14:34:31 sun kernel: [    0.822865] pci 0000:00:1c.0: PCI bridge to [bus 02]

Dec  8 14:34:31 sun kernel: [    0.823635] pci 0000:00:1c.1: PCI bridge to [bus 03]

Dec  8 14:34:31 sun rsyslogd: imuxsock: Acquired UNIX socket '/run/systemd/journal/syslog' (fd 3) from systemd.  [v8.1901.0]

Dec  8 14:34:31 sun rsyslogd:  [origin software="rsyslogd" swVersion="8.1901.0" x-pid="725" x-info="https://www.rsyslog.com"] start

Dec  8 14:34:31 sun kernel: [    0.824783] pci 0000:00:1c.2: PCI bridge to [bus 04-08]

Dec  8 14:34:31 sun kernel: [    0.825288] pci 0000:00:1c.3: PCI bridge to [bus 09]

Dec  8 14:34:31 sun kernel: [    0.825934] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)

Dec  8 14:34:31 sun kernel: [    0.826005] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)

Dec  8 14:34:31 sun kernel: [    0.826073] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)

Dec  8 14:34:31 sun kernel: [    0.826143] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7

Dec  8 14:34:31 sun kernel: [    0.826211] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.

Dec  8 14:34:31 sun kernel: [    0.826278] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.

Dec  8 14:34:31 sun kernel: [    0.826346] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7

Dec  8 14:34:31 sun kernel: [    0.826412] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)

Dec  8 14:34:31 sun kernel: [    0.827676] ACPI: EC: interrupt unblocked

Dec  8 14:34:31 sun kernel: [    0.827685] ACPI: EC: event unblocked

Dec  8 14:34:31 sun kernel: [    0.827692] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62

Dec  8 14:34:31 sun kernel: [    0.827694] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events

Dec  8 14:34:31 sun kernel: [    0.827787] pci 0000:00:02.0: vgaarb: setting as boot VGA device

Dec  8 14:34:31 sun kernel: [    0.827787] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

Dec  8 14:34:31 sun kernel: [    0.827787] pci 0000:00:02.0: vgaarb: bridge control possible

Dec  8 14:34:31 sun kernel: [    0.827787] vgaarb: loaded

Dec  8 14:34:31 sun kernel: [    0.827787] pps_core: LinuxPPS API ver. 1 registered

Dec  8 14:34:31 sun kernel: [    0.827787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

Dec  8 14:34:31 sun kernel: [    0.827787] PTP clock support registered

Dec  8 14:34:31 sun kernel: [    0.827787] EDAC MC: Ver: 3.0.0

Dec  8 14:34:31 sun kernel: [    0.827787] PCI: Using ACPI for IRQ routing

Dec  8 14:34:31 sun kernel: [    0.830376] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

Dec  8 14:34:31 sun kernel: [    0.830376] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

Dec  8 14:34:31 sun kernel: [    0.831026] clocksource: Switched to clocksource tsc-early

Dec  8 14:34:31 sun kernel: [    0.842988] VFS: Disk quotas dquot_6.6.0

Dec  8 14:34:31 sun kernel: [    0.843010] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

Dec  8 14:34:31 sun kernel: [    0.843150] AppArmor: AppArmor Filesystem Enabled

Dec  8 14:34:31 sun kernel: [    0.843173] pnp: PnP ACPI init

Dec  8 14:34:31 sun kernel: [    0.843370] system 00:00: [io  0x0680-0x069f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843372] system 00:00: [io  0x2000-0x2003] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843374] system 00:00: [io  0x0800-0x080f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843376] system 00:00: [io  0xffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843378] system 00:00: [io  0x0400-0x0453] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843380] system 00:00: [io  0x0458-0x047f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843381] system 00:00: [io  0x0500-0x057f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843383] system 00:00: [io  0x1600-0x16fe] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843385] system 00:00: [io  0xfe00] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843387] system 00:00: [io  0x0700-0x070f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843495] system 00:02: [io  0x0454-0x0457] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843801] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843803] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843805] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843807] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843809] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843811] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843813] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved

Dec  8 14:34:31 sun kernel: [    0.843815] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843817] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved

Dec  8 14:34:31 sun kernel: [    0.843819] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved

Dec  8 14:34:31 sun kernel: [    0.843821] system 00:06: [mem 0xfffff000-0xffffffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.844739] pnp: PnP ACPI: found 7 devices

Dec  8 14:34:31 sun kernel: [    0.851035] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

Dec  8 14:34:31 sun kernel: [    0.851086] pci 0000:00:1c.0: PCI bridge to [bus 02]

Dec  8 14:34:31 sun kernel: [    0.851104] pci 0000:00:1c.1: PCI bridge to [bus 03]

Dec  8 14:34:31 sun kernel: [    0.851110] pci 0000:00:1c.1:   bridge window [mem 0xe1600000-0xe16fffff]

Dec  8 14:34:31 sun kernel: [    0.851121] pci 0000:00:1c.2: PCI bridge to [bus 04-08]

Dec  8 14:34:31 sun kernel: [    0.851125] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]

Dec  8 14:34:31 sun kernel: [    0.851131] pci 0000:00:1c.2:   bridge window [mem 0xe0e00000-0xe15fffff]

Dec  8 14:34:31 sun kernel: [    0.851136] pci 0000:00:1c.2:   bridge window [mem 0xe0400000-0xe0bfffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.851144] pci 0000:00:1c.3: PCI bridge to [bus 09]

Dec  8 14:34:31 sun kernel: [    0.851147] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]

Dec  8 14:34:31 sun kernel: [    0.851153] pci 0000:00:1c.3:   bridge window [mem 0xe0d00000-0xe0dfffff]

Dec  8 14:34:31 sun kernel: [    0.851157] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe0cfffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.851310] NET: Registered protocol family 2

Dec  8 14:34:31 sun kernel: [    0.851503] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)

Dec  8 14:34:31 sun kernel: [    0.851540] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

Dec  8 14:34:31 sun kernel: [    0.851713] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

Dec  8 14:34:31 sun kernel: [    0.851871] TCP: Hash tables configured (established 65536 bind 65536)

Dec  8 14:34:31 sun kernel: [    0.851922] UDP hash table entries: 4096 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.851952] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.852038] NET: Registered protocol family 1

Dec  8 14:34:31 sun kernel: [    0.852044] NET: Registered protocol family 44

Dec  8 14:34:31 sun kernel: [    0.852058] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

Dec  8 14:34:31 sun kernel: [    0.852846] Unpacking initramfs...

Dec  8 14:34:31 sun kernel: [    1.335555] Freeing initrd memory: 20164K

Dec  8 14:34:31 sun kernel: [    1.364986] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

Dec  8 14:34:31 sun kernel: [    1.364989] software IO TLB: mapped [mem 0xac65f000-0xb065f000] (64MB)

Dec  8 14:34:31 sun kernel: [    1.365847] Initialise system trusted keyrings

Dec  8 14:34:31 sun kernel: [    1.365859] Key type blacklist registered

Dec  8 14:34:31 sun kernel: [    1.365920] workingset: timestamp_bits=40 max_order=21 bucket_order=0

Dec  8 14:34:31 sun kernel: [    1.367587] zbud: loaded

Dec  8 14:34:31 sun kernel: [    1.633908] Key type asymmetric registered

Dec  8 14:34:31 sun kernel: [    1.633910] Asymmetric key parser 'x509' registered

Dec  8 14:34:31 sun kernel: [    1.633923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

Dec  8 14:34:31 sun kernel: [    1.633969] io scheduler noop registered

Dec  8 14:34:31 sun kernel: [    1.633970] io scheduler deadline registered

Dec  8 14:34:31 sun kernel: [    1.634015] io scheduler cfq registered (default)

Dec  8 14:34:31 sun kernel: [    1.634016] io scheduler mq-deadline registered

Dec  8 14:34:31 sun kernel: [    1.634892] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

Dec  8 14:34:31 sun kernel: [    1.635498] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

Dec  8 14:34:31 sun kernel: [    1.636087] Linux agpgart interface v0.103

Dec  8 14:34:31 sun kernel: [    1.636154] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

Dec  8 14:34:31 sun kernel: [    1.636154] AMD IOMMUv2 functionality not available on this system

Dec  8 14:34:31 sun kernel: [    1.636534] i8042: PNP: PS/2 Controller [PNP0303:PSK2,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

Dec  8 14:34:31 sun kernel: [    1.638885] i8042: Detected active multiplexing controller, rev 1.1

Dec  8 14:34:31 sun kernel: [    1.641600] serio: i8042 KBD port at 0x60,0x64 irq 1

Dec  8 14:34:31 sun kernel: [    1.641605] serio: i8042 AUX0 port at 0x60,0x64 irq 12

Dec  8 14:34:31 sun kernel: [    1.641641] serio: i8042 AUX1 port at 0x60,0x64 irq 12

Dec  8 14:34:31 sun kernel: [    1.641668] serio: i8042 AUX2 port at 0x60,0x64 irq 12

Dec  8 14:34:31 sun kernel: [    1.641693] serio: i8042 AUX3 port at 0x60,0x64 irq 12

Dec  8 14:34:31 sun kernel: [    1.642026] mousedev: PS/2 mouse device common for all mice

Dec  8 14:34:31 sun kernel: [    1.642095] rtc_cmos 00:01: RTC can wake from S4

Dec  8 14:34:31 sun kernel: [    1.642373] rtc_cmos 00:01: registered as rtc0

Dec  8 14:34:31 sun kernel: [    1.642406] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

Dec  8 14:34:31 sun kernel: [    1.642424] intel_pstate: Intel P-state driver initializing

Dec  8 14:34:31 sun kernel: [    1.642884] ledtrig-cpu: registered to indicate activity on CPUs

Dec  8 14:34:31 sun kernel: [    1.643931] NET: Registered protocol family 10

Dec  8 14:34:31 sun kernel: [    1.662654] Segment Routing with IPv6

Dec  8 14:34:31 sun kernel: [    1.662702] mip6: Mobile IPv6

Dec  8 14:34:31 sun kernel: [    1.662706] NET: Registered protocol family 17

Dec  8 14:34:31 sun kernel: [    1.662879] mpls_gso: MPLS GSO support

Dec  8 14:34:31 sun kernel: [    1.663458] mce: Using 7 MCE banks

Dec  8 14:34:31 sun kernel: [    1.663579] microcode: sig=0x306a9, pf=0x10, revision=0x20

Dec  8 14:34:31 sun kernel: [    1.663799] microcode: Microcode Update Driver: v2.2.

Dec  8 14:34:31 sun kernel: [    1.663828] sched_clock: Marking stable (1661597550, 2182448)->(1671138147, -7358149)

Dec  8 14:34:31 sun kernel: [    1.664066] registered taskstats version 1

Dec  8 14:34:31 sun kernel: [    1.664067] Loading compiled-in X.509 certificates

Dec  8 14:34:31 sun kernel: [    1.684820] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

Dec  8 14:34:31 sun kernel: [    1.707910] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'

Dec  8 14:34:31 sun kernel: [    1.707925] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'

Dec  8 14:34:31 sun kernel: [    1.707942] zswap: loaded using pool lzo/zbud

Dec  8 14:34:31 sun kernel: [    1.708050] AppArmor: AppArmor sha1 policy hashing enabled

Dec  8 14:34:31 sun kernel: [    1.708400] rtc_cmos 00:01: setting system clock to 2020-12-08 13:33:25 UTC (1607434405)

Dec  8 14:34:31 sun kernel: [    1.709767] Freeing unused kernel image memory: 1584K

Dec  8 14:34:31 sun kernel: [    1.729077] Write protecting the kernel read-only data: 16384k

Dec  8 14:34:31 sun kernel: [    1.730310] Freeing unused kernel image memory: 2028K

Dec  8 14:34:31 sun kernel: [    1.730789] Freeing unused kernel image memory: 772K

Dec  8 14:34:31 sun kernel: [    1.742095] x86/mm: Checked W+X mappings: passed, no W+X pages found.

Dec  8 14:34:31 sun kernel: [    1.742097] x86/mm: Checking user space page tables

Dec  8 14:34:31 sun kernel: [    1.749718] x86/mm: Checked W+X mappings: passed, no W+X pages found.

Dec  8 14:34:31 sun kernel: [    1.749720] Run /init as init process

Dec  8 14:34:31 sun kernel: [    1.884035] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3

Dec  8 14:34:31 sun kernel: [    1.884056] ACPI: Lid Switch [LID]

Dec  8 14:34:31 sun kernel: [    1.884120] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4

Dec  8 14:34:31 sun kernel: [    1.884131] ACPI: Power Button [PWRB]

Dec  8 14:34:31 sun kernel: [    1.884188] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5

Dec  8 14:34:31 sun kernel: [    1.884200] ACPI: Sleep Button [SLPB]

Dec  8 14:34:31 sun kernel: [    1.884257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6

Dec  8 14:34:31 sun kernel: [    1.884269] ACPI: Power Button [PWRF]

Dec  8 14:34:31 sun kernel: [    1.893574] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)

Dec  8 14:34:31 sun kernel: [    1.924013] cryptd: max_cpu_qlen set to 1000

Dec  8 14:34:31 sun kernel: [    1.927602] SCSI subsystem initialized

Dec  8 14:34:31 sun kernel: [    1.938506] AVX version of gcm_enc/dec engaged.

Dec  8 14:34:31 sun kernel: [    1.938508] AES CTR mode by8 optimization enabled

Dec  8 14:34:31 sun kernel: [    1.969655] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 impl SATA mode

Dec  8 14:34:31 sun kernel: [    1.969659] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 

Dec  8 14:34:31 sun kernel: [    1.978738] thermal LNXTHERM:00: registered as thermal_zone0

Dec  8 14:34:31 sun kernel: [    1.978741] ACPI: Thermal Zone [TZ00] (53 C)

Dec  8 14:34:31 sun kernel: [    1.981532] scsi host0: ahci

Dec  8 14:34:31 sun kernel: [    1.981835] scsi host1: ahci

Dec  8 14:34:31 sun kernel: [    1.981972] scsi host2: ahci

Dec  8 14:34:31 sun kernel: [    1.982104] scsi host3: ahci

Dec  8 14:34:31 sun kernel: [    1.982179] ata1: SATA max UDMA/133 abar m2048@0xe1718000 port 0xe1718100 irq 26

Dec  8 14:34:31 sun kernel: [    1.982181] ata2: DUMMY

Dec  8 14:34:31 sun kernel: [    1.982184] ata3: SATA max UDMA/133 abar m2048@0xe1718000 port 0xe1718200 irq 26

Dec  8 14:34:31 sun kernel: [    1.982185] ata4: DUMMY

Dec  8 14:34:31 sun kernel: [    2.048795] [drm] Replacing VGA console driver

Dec  8 14:34:31 sun kernel: [    2.049764] Console: switching to colour dummy device 80x25

Dec  8 14:34:31 sun kernel: [    2.050875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

Dec  8 14:34:31 sun kernel: [    2.050888] [drm] Driver supports precise vblank timestamp query.

Dec  8 14:34:31 sun kernel: [    2.082252] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

Dec  8 14:34:31 sun kernel: [    2.267732] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0

Dec  8 14:34:31 sun kernel: [    2.268385] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

Dec  8 14:34:31 sun kernel: [    2.268611] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13

Dec  8 14:34:31 sun kernel: [    2.299249] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

Dec  8 14:34:31 sun kernel: [    2.299308] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Dec  8 14:34:31 sun kernel: [    2.299954] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

Dec  8 14:34:31 sun kernel: [    2.299956] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

Dec  8 14:34:31 sun kernel: [    2.300962] ata3.00: ATA-8: SanDisk SD6SF1M256GG56, X231200, max UDMA/133

Dec  8 14:34:31 sun kernel: [    2.300966] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA

Dec  8 14:34:31 sun kernel: [    2.301947] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

Dec  8 14:34:31 sun kernel: [    2.301949] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

Dec  8 14:34:31 sun kernel: [    2.302255] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

Dec  8 14:34:31 sun kernel: [    2.302257] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

Dec  8 14:34:31 sun kernel: [    2.302434] ata1.00: supports DRM functions and may not be fully accessible

Dec  8 14:34:31 sun kernel: [    2.303238] ata3.00: configured for UDMA/133

Dec  8 14:34:31 sun kernel: [    2.307208] ata1.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133

Dec  8 14:34:31 sun kernel: [    2.307211] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA

Dec  8 14:34:31 sun kernel: [    2.313523] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

Dec  8 14:34:31 sun kernel: [    2.313526] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

Dec  8 14:34:31 sun kernel: [    2.313734] ata1.00: supports DRM functions and may not be fully accessible

Dec  8 14:34:31 sun kernel: [    2.323688] ata1.00: configured for UDMA/133

Dec  8 14:34:31 sun kernel: [    2.334102] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5

Dec  8 14:34:31 sun kernel: [    2.334713] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SD6SF1M2 200  PQ: 0 ANSI: 5

Dec  8 14:34:31 sun kernel: [    2.389007] tsc: Refined TSC clocksource calibration: 1696.147 MHz

Dec  8 14:34:31 sun kernel: [    2.389034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872ef8535c, max_idle_ns: 440795255355 ns

Dec  8 14:34:31 sun kernel: [    2.389048] clocksource: Switched to clocksource tsc

Dec  8 14:34:31 sun kernel: [    2.465631] fbcon: inteldrmfb (fb0) is primary device

Dec  8 14:34:31 sun kernel: [    2.618176] psmouse serio4: synaptics: queried max coordinates: x [..5702], y [..4714]

Dec  8 14:34:31 sun kernel: [    2.653703] psmouse serio4: synaptics: queried min coordinates: x [1240..], y [1140..]

Dec  8 14:34:31 sun kernel: [    2.653720] psmouse serio4: synaptics: Your touchpad (PNP: LEN0051 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.

Dec  8 14:34:31 sun kernel: [    2.723841] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00/0x0, board id: 2228, fw id: 1212753

Dec  8 14:34:31 sun kernel: [    2.723859] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0

Dec  8 14:34:31 sun kernel: [    2.765999] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12

Dec  8 14:34:31 sun kernel: [    3.350666] Console: switching to colour frame buffer device 170x48

Dec  8 14:34:31 sun kernel: [    3.375309] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

Dec  8 14:34:31 sun kernel: [    3.400899] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)

Dec  8 14:34:31 sun kernel: [    3.400904] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)

Dec  8 14:34:31 sun kernel: [    3.400910] sd 0:0:0:0: [sda] Write Protect is off

Dec  8 14:34:31 sun kernel: [    3.400913] sd 2:0:0:0: [sdb] Write Protect is off

Dec  8 14:34:31 sun kernel: [    3.400927] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Dec  8 14:34:31 sun kernel: [    3.400929] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Dec  8 14:34:31 sun kernel: [    3.405035] sd 0:0:0:0: [sda] supports TCG Opal

Dec  8 14:34:31 sun kernel: [    3.405037] sd 0:0:0:0: [sda] Attached SCSI disk

Dec  8 14:34:31 sun kernel: [    3.407450]  sdb: sdb1 sdb2 < sdb5 >

Dec  8 14:34:31 sun kernel: [    3.407755] sd 2:0:0:0: [sdb] Attached SCSI disk

Dec  8 14:34:31 sun kernel: [    3.475163] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3

Dec  8 14:34:31 sun kernel: [    3.715126] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input14

Dec  8 14:34:31 sun kernel: [    3.778598] device-mapper: uevent: version 1.0.3

Dec  8 14:34:31 sun kernel: [    3.778705] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com

Dec  8 14:34:31 sun kernel: [   65.610216] NET: Registered protocol family 38

Dec  8 14:34:31 sun kernel: [   66.135152] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)

Dec  8 14:34:31 sun kernel: [   66.793745] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro

Dec  8 14:34:31 sun kernel: [   66.816008] lp: driver loaded but no devices found

Dec  8 14:34:31 sun kernel: [   66.823245] ppdev: user-space parallel port driver

Dec  8 14:34:31 sun kernel: [   67.061653] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)

Dec  8 14:34:31 sun kernel: [   67.061662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Dec  8 14:34:31 sun kernel: [   67.061665] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)

Dec  8 14:34:31 sun kernel: [   67.061671] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Dec  8 14:34:31 sun kernel: [   67.061672] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)

Dec  8 14:34:31 sun kernel: [   67.061677] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Dec  8 14:34:31 sun kernel: [   67.061678] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)

Dec  8 14:34:31 sun kernel: [   67.061682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Dec  8 14:34:31 sun kernel: [   67.061683] lpc_ich: Resource conflict(s) found affecting gpio_ich

Dec  8 14:34:31 sun kernel: [   67.068690] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

Dec  8 14:34:31 sun kernel: [   67.080327] Non-volatile memory driver v1.3

Dec  8 14:34:31 sun kernel: [   67.109792] ACPI: AC Adapter [ACAD] (on-line)

Dec  8 14:34:31 sun kernel: [   67.120570] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)

Dec  8 14:34:31 sun kernel: [   67.131051] ACPI: bus type USB registered

Dec  8 14:34:31 sun kernel: [   67.131084] usbcore: registered new interface driver usbfs

Dec  8 14:34:31 sun kernel: [   67.131096] usbcore: registered new interface driver hub

Dec  8 14:34:31 sun kernel: [   67.131132] usbcore: registered new device driver usb

Dec  8 14:34:31 sun kernel: [   67.155201] battery: ACPI: Battery Slot [BAT1] (battery present)

Dec  8 14:34:31 sun kernel: [   67.158865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Dec  8 14:34:31 sun kernel: [   67.159391] thinkpad_acpi: ThinkPad ACPI Extras v0.26

Dec  8 14:34:31 sun kernel: [   67.159393] thinkpad_acpi: http://ibm-acpi.sf.net/

Dec  8 14:34:31 sun kernel: [   67.159394] thinkpad_acpi: ThinkPad BIOS H6ETA0WW (2.18 ), EC unknown

Dec  8 14:34:31 sun kernel: [   67.159395] thinkpad_acpi: Lenovo ThinkPad T430u, model 335337G

Dec  8 14:34:31 sun kernel: [   67.160785] ehci-pci: EHCI PCI platform driver

Dec  8 14:34:31 sun kernel: [   67.160964] ehci-pci 0000:00:1a.0: EHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.160972] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

Dec  8 14:34:31 sun kernel: [   67.160987] ehci-pci 0000:00:1a.0: debug port 2

Dec  8 14:34:31 sun kernel: [   67.164918] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe171a000

Dec  8 14:34:31 sun kernel: [   67.164978] sd 0:0:0:0: Attached scsi generic sg0 type 0

Dec  8 14:34:31 sun kernel: [   67.166474] sd 2:0:0:0: Attached scsi generic sg1 type 0

Dec  8 14:34:31 sun kernel: [   67.174015] tpm tpm0: TPM is disabled/deactivated (0x6)

Dec  8 14:34:31 sun kernel: [   67.174896] thinkpad_acpi: radio switch found; radios are enabled

Dec  8 14:34:31 sun kernel: [   67.174909] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode

Dec  8 14:34:31 sun kernel: [   67.174927] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver

Dec  8 14:34:31 sun kernel: [   67.174928] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...

Dec  8 14:34:31 sun kernel: [   67.179704] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

Dec  8 14:34:31 sun kernel: [   67.179789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

Dec  8 14:34:31 sun kernel: [   67.179791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Dec  8 14:34:31 sun kernel: [   67.179793] usb usb1: Product: EHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.179794] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd

Dec  8 14:34:31 sun kernel: [   67.179795] usb usb1: SerialNumber: 0000:00:1a.0

Dec  8 14:34:31 sun kernel: [   67.179984] hub 1-0:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.179994] hub 1-0:1.0: 3 ports detected

Dec  8 14:34:31 sun kernel: [   67.180345] ehci-pci 0000:00:1d.0: EHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.180352] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

Dec  8 14:34:31 sun kernel: [   67.180366] ehci-pci 0000:00:1d.0: debug port 2

Dec  8 14:34:31 sun kernel: [   67.184447] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe1719000

Dec  8 14:34:31 sun kernel: [   67.186167] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked

Dec  8 14:34:31 sun kernel: [   67.188881] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one

Dec  8 14:34:31 sun kernel: [   67.189190] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)

Dec  8 14:34:31 sun kernel: [   67.196979] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

Dec  8 14:34:31 sun kernel: [   67.197058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

Dec  8 14:34:31 sun kernel: [   67.197060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Dec  8 14:34:31 sun kernel: [   67.197062] usb usb2: Product: EHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.197063] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd

Dec  8 14:34:31 sun kernel: [   67.197065] usb usb2: SerialNumber: 0000:00:1d.0

Dec  8 14:34:31 sun kernel: [   67.197231] hub 2-0:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.197242] hub 2-0:1.0: 3 ports detected

Dec  8 14:34:31 sun kernel: [   67.202931] battery: extension unregistered: ThinkPad Battery Extension

Dec  8 14:34:31 sun kernel: [   67.203042] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15

Dec  8 14:34:31 sun kernel: [   67.236187] input: PC Speaker as /devices/platform/pcspkr/input/input16

Dec  8 14:34:31 sun kernel: [   67.239785] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer

Dec  8 14:34:31 sun kernel: [   67.239787] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

Dec  8 14:34:31 sun kernel: [   67.239788] RAPL PMU: hw unit of domain package 2^-16 Joules

Dec  8 14:34:31 sun kernel: [   67.239789] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules

Dec  8 14:34:31 sun kernel: [   67.280314] xhci_hcd 0000:00:14.0: xHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.280320] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

Dec  8 14:34:31 sun kernel: [   67.280855] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control

Dec  8 14:34:31 sun kernel: [   67.281393] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930

Dec  8 14:34:31 sun kernel: [   67.284571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

Dec  8 14:34:31 sun kernel: [   67.284575] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Dec  8 14:34:31 sun kernel: [   67.284576] usb usb3: Product: xHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.284578] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd

Dec  8 14:34:31 sun kernel: [   67.284579] usb usb3: SerialNumber: 0000:00:14.0

Dec  8 14:34:31 sun kernel: [   67.284774] hub 3-0:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.284812] hub 3-0:1.0: 4 ports detected

Dec  8 14:34:31 sun kernel: [   67.285864] xhci_hcd 0000:00:14.0: xHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.285870] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

Dec  8 14:34:31 sun kernel: [   67.285875] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed

Dec  8 14:34:31 sun kernel: [   67.285948] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

Dec  8 14:34:31 sun kernel: [   67.285950] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Dec  8 14:34:31 sun kernel: [   67.285952] usb usb4: Product: xHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.285953] usb usb4: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd

Dec  8 14:34:31 sun kernel: [   67.285955] usb usb4: SerialNumber: 0000:00:14.0

Dec  8 14:34:31 sun kernel: [   67.286130] hub 4-0:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.286144] hub 4-0:1.0: 4 ports detected

Dec  8 14:34:31 sun kernel: [   67.310510] libphy: r8169: probed

Dec  8 14:34:31 sun kernel: [   67.311026] r8169 0000:09:00.0 eth0: RTL8168evl/8111evl, 08:9e:01:2e:3b:e5, XID 2c900800, IRQ 30

Dec  8 14:34:31 sun kernel: [   67.311030] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

Dec  8 14:34:31 sun kernel: [   67.330253] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

Dec  8 14:34:31 sun kernel: [   67.340271] Intel(R) Wireless WiFi driver for Linux

Dec  8 14:34:31 sun kernel: [   67.340272] Copyright(c) 2003- 2015 Intel Corporation

Dec  8 14:34:31 sun kernel: [   67.340486] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control

Dec  8 14:34:31 sun kernel: [   67.343122] iTCO_vendor_support: vendor-support=0

Dec  8 14:34:31 sun kernel: [   67.369875] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

Dec  8 14:34:31 sun kernel: [   67.369938] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)

Dec  8 14:34:31 sun kernel: [   67.371734] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

Dec  8 14:34:31 sun kernel: [   67.378221] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-2030-6.ucode

Dec  8 14:34:31 sun kernel: [   67.378443] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm

Dec  8 14:34:31 sun kernel: [   67.418183] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

Dec  8 14:34:31 sun kernel: [   67.418186] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

Dec  8 14:34:31 sun kernel: [   67.418188] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)

Dec  8 14:34:31 sun kernel: [   67.418190] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

Dec  8 14:34:31 sun kernel: [   67.418191] snd_hda_codec_realtek hdaudioC0D0:    inputs:

Dec  8 14:34:31 sun kernel: [   67.418193] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18

Dec  8 14:34:31 sun kernel: [   67.418195] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12

Dec  8 14:34:31 sun kernel: [   67.437595] r8169 0000:09:00.0 enp9s0: renamed from eth0

Dec  8 14:34:31 sun kernel: [   67.512977] usb 1-1: new high-speed USB device number 2 using ehci-pci

Dec  8 14:34:31 sun kernel: [   67.552970] usb 2-1: new high-speed USB device number 2 using ehci-pci

Dec  8 14:34:31 sun kernel: [   67.566967] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17

Dec  8 14:34:31 sun kernel: [   67.567792] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18

Dec  8 14:34:31 sun kernel: [   67.567865] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19

Dec  8 14:34:31 sun kernel: [   67.567934] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20

Dec  8 14:34:31 sun kernel: [   67.568002] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21

Dec  8 14:34:31 sun kernel: [   67.582685] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled

Dec  8 14:34:31 sun kernel: [   67.582687] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled

Dec  8 14:34:31 sun kernel: [   67.582689] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled

Dec  8 14:34:31 sun kernel: [   67.582690] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8

Dec  8 14:34:31 sun kernel: [   67.587740] psmouse serio5: Failed to deactivate mouse on synaptics-pt/serio0: -5

Dec  8 14:34:31 sun kernel: [   67.624977] usb 3-2: new full-speed USB device number 2 using xhci_hcd

Dec  8 14:34:31 sun kernel: [   67.651512] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0

Dec  8 14:34:31 sun kernel: [   67.676554] intel_rapl: Found RAPL domain package

Dec  8 14:34:31 sun kernel: [   67.676556] intel_rapl: Found RAPL domain core

Dec  8 14:34:31 sun kernel: [   67.676557] intel_rapl: Found RAPL domain uncore

Dec  8 14:34:31 sun kernel: [   67.676563] intel_rapl: RAPL package 0 domain package locked by BIOS

Dec  8 14:34:31 sun kernel: [   67.678031] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

Dec  8 14:34:31 sun kernel: [   67.678034] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

Dec  8 14:34:31 sun kernel: [   67.680641] hub 1-1:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.680716] hub 1-1:1.0: 4 ports detected

Dec  8 14:34:31 sun kernel: [   67.702767] Adding 7999484k swap on /dev/mapper/sun-swap.  Priority:-2 extents:1 across:7999484k SSFS

Dec  8 14:34:31 sun kernel: [   67.709588] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

Dec  8 14:34:31 sun kernel: [   67.709591] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

Dec  8 14:34:31 sun kernel: [   67.710085] hub 2-1:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.710793] hub 2-1:1.0: 6 ports detected

Dec  8 14:34:31 sun kernel: [   67.775588] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10

Dec  8 14:34:31 sun kernel: [   67.775592] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

Dec  8 14:34:31 sun kernel: [   67.775594] usb 3-2: Product: USB Receiver

Dec  8 14:34:31 sun kernel: [   67.775595] usb 3-2: Manufacturer: Logitech

Dec  8 14:34:31 sun kernel: [   67.778210] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)

Dec  8 14:34:31 sun kernel: [   67.787081] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

Dec  8 14:34:31 sun kernel: [   67.846657] audit: type=1400 audit(1607434471.632:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=669 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.846662] audit: type=1400 audit(1607434471.632:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=669 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.848820] audit: type=1400 audit(1607434471.632:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=671 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.850174] audit: type=1400 audit(1607434471.636:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=670 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.850179] audit: type=1400 audit(1607434471.636:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.850181] audit: type=1400 audit(1607434471.636:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=670 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.851420] audit: type=1400 audit(1607434471.636:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=674 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.855258] audit: type=1400 audit(1607434471.640:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=678 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.857291] audit: type=1400 audit(1607434471.644:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=677 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.857680] audit: type=1400 audit(1607434471.644:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=676 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.904978] usb 3-4: new high-speed USB device number 3 using xhci_hcd

Dec  8 14:34:31 sun udisksd[722]: udisks daemon version 2.8.1 starting

Dec  8 14:34:31 sun kernel: [   68.171525] usb 3-4: New USB device found, idVendor=5986, idProduct=0523, bcdDevice=14.02

Dec  8 14:34:31 sun kernel: [   68.171529] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2

Dec  8 14:34:31 sun kernel: [   68.171530] usb 3-4: Product: Integrated Camera

Dec  8 14:34:31 sun kernel: [   68.171532] usb 3-4: Manufacturer: Generic

Dec  8 14:34:31 sun kernel: [   68.171534] usb 3-4: SerialNumber: 200901010001

Dec  8 14:34:31 sun mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4"

Dec  8 14:34:31 sun mtp-probe: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2"

Dec  8 14:34:31 sun mtp-probe: bus: 3, device: 3 was not an MTP device

Dec  8 14:34:31 sun mtp-probe: bus: 3, device: 2 was not an MTP device

Dec  8 14:34:32 sun kernel: [   68.317130] media: Linux media interface: v0.10

Dec  8 14:34:32 sun kernel: [   68.318162] hidraw: raw HID events driver (C) Jiri Kosina

Dec  8 14:34:32 sun kernel: [   68.329898] usbcore: registered new interface driver usbhid

Dec  8 14:34:32 sun kernel: [   68.329899] usbhid: USB HID core driver

Dec  8 14:34:32 sun mtp-probe: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2"

Dec  8 14:34:32 sun mtp-probe: bus: 3, device: 2 was not an MTP device

Dec  8 14:34:32 sun kernel: [   68.343921] videodev: Linux video capture interface: v2.00

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1366] NetworkManager (version 1.14.6) is starting... (for the first time)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1367] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1387] wifi-nl80211: (wlp3s0): using nl80211 for WiFi device control

Dec  8 14:34:32 sun udisksd[722]: failed to load module mdraid: libbd_mdraid.so.2: cannot open shared object file: No such file or directory

Dec  8 14:34:32 sun kernel: [   68.357283] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1729] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"

Dec  8 14:34:32 sun kernel: [   68.384330] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0523)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1790] manager[0x56499a0f6030]: monitoring kernel firmware directory '/lib/firmware'.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1792] monitoring ifupdown state file '/run/network/ifstate'.

Dec  8 14:34:32 sun udisksd[722]: Failed to load the 'mdraid' libblockdev plugin

Dec  8 14:34:32 sun kernel: [   68.395105] uvcvideo 3-4:1.0: Entity type for entity Extension 4 was not initialized!

Dec  8 14:34:32 sun kernel: [   68.395108] uvcvideo 3-4:1.0: Entity type for entity Processing 2 was not initialized!

Dec  8 14:34:32 sun kernel: [   68.395110] uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized!

Dec  8 14:34:32 sun kernel: [   68.395296] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input22

Dec  8 14:34:32 sun kernel: [   68.395543] usbcore: registered new interface driver uvcvideo

Dec  8 14:34:32 sun kernel: [   68.395544] USB Video Class driver (1.1.1)

Dec  8 14:34:32 sun mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4"

Dec  8 14:34:32 sun mtp-probe: bus: 3, device: 3 was not an MTP device

Dec  8 14:34:32 sun kernel: [   68.480433] input: Logitech Unifying Device. Wireless PID:101b Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input23

Dec  8 14:34:32 sun kernel: [   68.480564] hid-generic 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-2:1

Dec  8 14:34:32 sun vboxdrv.sh: Starting VirtualBox services.

Dec  8 14:34:32 sun kernel: [   68.551604] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input27

Dec  8 14:34:32 sun kernel: [   68.551784] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-2:1

Dec  8 14:34:32 sun kernel: [   68.591620] vboxdrv: loading out-of-tree module taints kernel.

Dec  8 14:34:32 sun kernel: [   68.591899] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel

Dec  8 14:34:32 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:32 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:32 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:32 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:32 sun turnserver: 0: TLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:32 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:32 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:32 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:32 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:32 sun turnserver: 0: Redis supported

Dec  8 14:34:32 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:32 sun turnserver: 0: MySQL supported

Dec  8 14:34:32 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:32 sun turnserver: 0: Domain name: 

Dec  8 14:34:32 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:32 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:32 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:32 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:32 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:32 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:32 sun kernel: [   68.654834] vboxdrv: TSC mode is Invariant, tentative frequency 1696147696 Hz

Dec  8 14:34:32 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:32 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4897] hostname: hostname: using hostnamed

Dec  8 14:34:32 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4897] hostname: hostname changed from (none) to "sun"

Dec  8 14:34:32 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4900] dns-mgr[0x56499a1030f0]: init: dns=default, rc-manager=resolvconf

Dec  8 14:34:32 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:32 sun kernel: [   68.939791] VBoxNetFlt: Successfully started.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4910] rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi)

Dec  8 14:34:32 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4914] manager[0x56499a0f6030]: rfkill: WiFi hardware radio set disabled

Dec  8 14:34:32 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:32 sun kernel: [   68.961386] VBoxNetAdp: Successfully started.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4914] manager[0x56499a0f6030]: rfkill: WWAN hardware radio set disabled

Dec  8 14:34:32 sun turnserver: 0: TLS supported

Dec  8 14:34:32 sun kernel: [   68.987675] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready

Dec  8 14:34:32 sun kernel: [   68.987870] r8169 0000:09:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2

Dec  8 14:34:32 sun kernel: [   68.987874] r8169 0000:09:00.0 enp9s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)

Dec  8 14:34:32 sun kernel: [   68.991170] RTL8211E Gigabit Ethernet r8169-900:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)

Dec  8 14:34:32 sun turnserver: 0: DTLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:32 sun udisksd[722]: Acquired the name org.freedesktop.UDisks2 on the system message bus

Dec  8 14:34:32 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:32 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:32 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:32 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5912] ifupdown:       interface-parser: parsing file /etc/network/interfaces

Dec  8 14:34:32 sun turnserver: 0: Redis supported

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5913] ifupdown:       interface-parser: source line includes interfaces file(s) /etc/network/interfaces.d/*

Dec  8 14:34:32 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:32 sun NetworkManager[741]: <warn>  [1607434472.5913] ifupdown: interfaces file /etc/network/interfaces.d/* doesn't exist

Dec  8 14:34:32 sun turnserver: 0: MySQL supported

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5913] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces

Dec  8 14:34:32 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5914] ifupdown: management mode: unmanaged

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5914] settings: Loaded settings plugin: SettingsPluginIfupdown ("/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-settings-plugin-ifupdown.so")

Dec  8 14:34:32 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5914] settings: Loaded settings plugin: NMSKeyfilePlugin (internal)

Dec  8 14:34:32 sun turnserver: 0: Domain name: 

Dec  8 14:34:32 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6035] keyfile: new connection /etc/NetworkManager/system-connections/Auto SFR_A2DF_Ext.nmconnection (d6f2dbf8-5a37-46f2-88a5-cd1ff6df6a47,"Auto SFR_A2DF_Ext")

Dec  8 14:34:32 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6064] keyfile: new connection /etc/NetworkManager/system-connections/Auto SFR_A2DF.nmconnection (c532a6eb-d203-454e-865e-bf13dcccad37,"Auto SFR_A2DF")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6088] keyfile: new connection /etc/NetworkManager/system-connections/Auto SFR_D3AF.nmconnection (57e5d22c-0e4d-4864-8770-163c9f964cbe,"Auto SFR_D3AF")

Dec  8 14:34:32 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6120] keyfile: new connection /etc/NetworkManager/system-connections/Auto FairCastle.nmconnection (b6b7698b-4ffe-480c-8d7d-c78654f037b7,"Auto FairCastle")

Dec  8 14:34:32 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6148] keyfile: new connection /etc/NetworkManager/system-connections/Auto Lalis-2G.nmconnection (691400e4-1f6e-48e4-88af-a1059078bf0b,"Auto Lalis-2G")

Dec  8 14:34:32 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6182] keyfile: new connection /etc/NetworkManager/system-connections/Auto litle-castel.nmconnection (958a24cb-0fda-4a4b-895d-64bc6d7a9a0f,"Auto litle-castel")

Dec  8 14:34:32 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6236] keyfile: new connection /etc/NetworkManager/system-connections/Auto Castel.nmconnection (455209ad-a71b-43f4-9b52-9033b53acac0,"Auto Castel")

Dec  8 14:34:32 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6266] keyfile: new connection /etc/NetworkManager/system-connections/freebox_cathy.nmconnection (f3e0faf3-2c1c-4792-93d2-a44278ab39f3,"freebox_cathy")

Dec  8 14:34:32 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6295] keyfile: new connection /etc/NetworkManager/system-connections/Auto LitleBoat.nmconnection (c9ac6baa-bfc6-4060-924b-c04c4b2e87e9,"Auto LitleBoat")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6359] keyfile: new connection /etc/NetworkManager/system-connections/192.168.1.6.nmconnection (266e10fd-51db-4e1d-9231-6f82216a23b4,"192.168.1.6")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6416] keyfile: new connection /etc/NetworkManager/system-connections/192.168.2.2.nmconnection (268b7833-1fb4-417c-8a89-b7764e27d655,"192.168.2.2")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6453] keyfile: new connection /etc/NetworkManager/system-connections/Auto OpenWrt.nmconnection (d5e27b61-5683-4701-a0e6-ba5e42881468,"Auto OpenWrt")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6536] keyfile: new connection /etc/NetworkManager/system-connections/Auto wifi-01.nmconnection (de48816a-5dbc-48b8-a857-41984954ab3a,"Auto wifi-01")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6590] keyfile: new connection /etc/NetworkManager/system-connections/Hotspot.nmconnection (06e0143f-46f0-4767-9230-6f08cb0a46f7,"Hotspot")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6656] keyfile: new connection /etc/NetworkManager/system-connections/Auto Bbox-46A04483.nmconnection (b21dbee3-438f-43a7-8ad4-c2a3a763397e,"Auto Bbox-46A04483")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6693] keyfile: new connection /etc/NetworkManager/system-connections/Auto Bbox-37terAvenueJonkind.nmconnection (ec0e5a6e-11d5-4797-8387-626b4a1876f6,"Auto Bbox-37terAvenueJonkind")

Dec  8 14:34:32 sun NetworkManager[741]: <warn>  [1607434472.6756] keyfile: cannot load /etc/NetworkManager/system-connections/Hotspot.nmconnection.bak due to conflicting UUID for /etc/NetworkManager/system-connections/Hotspot.nmconnection (06e0143f-46f0-4767-9230-6f08cb0a46f7,"Hotspot")

Dec  8 14:34:32 sun kernel: [   69.106480] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6825] keyfile: new connection /etc/NetworkManager/system-connections/Auto 12.nmconnection (5d194f1d-a8eb-4c03-b500-8d116b36931c,"Auto 12")

Dec  8 14:34:32 sun vboxdrv.sh: VirtualBox services started.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6867] keyfile: new connection /etc/NetworkManager/system-connections/10.0.0.10_8.nmconnection (4fbb05b5-0af5-437c-92dc-3f8958628bbc,"10.0.0.10/8")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6923] keyfile: new connection /etc/NetworkManager/system-connections/DHCP.nmconnection (051f69e2-8743-4fea-b376-dc5a2888c605,"DHCP")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6981] keyfile: new connection /etc/NetworkManager/system-connections/192.168.0.100_24.nmconnection (e4508d2b-aa93-4e90-becb-20fc13c46dcc,"192.168.0.100/24")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7047] keyfile: new connection /etc/NetworkManager/system-connections/Auto Bbox-B64BA508.nmconnection (b5b06ec1-1e8f-4130-9d74-cc1c5b2d882d,"Auto Bbox-B64BA508")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7090] keyfile: new connection /etc/NetworkManager/system-connections/Auto Lalis.nmconnection (f45c770e-6f9b-435d-a25b-c1289dcd3f7d,"Auto Lalis")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7136] keyfile: new connection /etc/NetworkManager/system-connections/Auto castle_2.4GHz.nmconnection (de597337-e386-4b2b-b043-ad88e4e4cee1,"Auto castle_2.4GHz")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7448] manager: rfkill: WiFi disabled by radio killswitch; disabled by state file

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7449] manager: rfkill: WWAN enabled by radio killswitch; disabled by state file

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7451] manager: Networking is enabled by state file

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7453] dhcp-init: Using DHCP client 'dhclient'

Dec  8 14:34:32 sun kernel: [   69.111006] r8169 0000:09:00.0 enp9s0: Link is Down

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7545] Loaded device plugin: NMTeamFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-team.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7650] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-bluetooth.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7670] Loaded device plugin: NMAtmManager (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-adsl.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7713] Loaded device plugin: NMWifiFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-wifi.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7736] Loaded device plugin: NMWwanFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-wwan.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7751] device (lo): carrier: link connected

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7756] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7773] manager: (enp9s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7788] device (enp9s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')

Dec  8 14:34:32 sun colord[829]: failed to get session [pid 748]: Aucune donnée disponible

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.9033] device (wlp3s0): driver supports Access Point (AP) mode

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.9196] manager: (wlp3s0): new 802.11 WiFi device (/org/freedesktop/NetworkManager/Devices/3)

Dec  8 14:34:32 sun colord[829]: failed to get session [pid 748]: Aucune donnée disponible

Dec  8 14:34:32 sun kernel: [   69.145870] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.9370] device (wlp3s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')

Dec  8 14:34:32 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.9414] device (wlp3s0): set-hw-addr: set MAC address to EA:DB:F1:BE:94:74 (scanning)

Dec  8 14:34:32 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:32 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:32 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:32 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:32 sun turnserver: 0: TLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:32 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:32 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:32 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:32 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun turnserver: 0: Redis supported

Dec  8 14:34:33 sun colord[829]: failed to get session [pid 748]: Aucune donnée disponible

Dec  8 14:34:33 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver: 0: MySQL supported

Dec  8 14:34:33 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:33 sun turnserver: 0: Domain name: 

Dec  8 14:34:33 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:33 sun NetworkManager[741]: <info>  [1607434473.1325] modem-manager: ModemManager available

Dec  8 14:34:33 sun NetworkManager[741]: <info>  [1607434473.1326] supplicant: wpa_supplicant running

Dec  8 14:34:33 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:33 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:33 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:33 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:33 sun turnserver: 0: TLS supported

Dec  8 14:34:33 sun turnserver: 0: DTLS supported

Dec  8 14:34:33 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:33 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:33 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:33 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:33 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun turnserver: 0: Redis supported

Dec  8 14:34:33 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver: 0: MySQL supported

Dec  8 14:34:33 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:33 sun turnserver: 0: Domain name: 

Dec  8 14:34:33 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:33 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:33 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:33 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:33 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:33 sun turnserver: 0: TLS supported

Dec  8 14:34:33 sun turnserver: 0: DTLS supported

Dec  8 14:34:33 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:33 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:33 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:33 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:33 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun turnserver: 0: Redis supported

Dec  8 14:34:33 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver: 0: MySQL supported

Dec  8 14:34:33 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:33 sun turnserver: 0: Domain name: 

Dec  8 14:34:33 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:35 sun kernel: [   71.387736] fuse init (API version 7.27)

Dec  8 14:34:35 sun kernel: [   72.098687] r8169 0000:09:00.0 enp9s0: Link is Up - 1Gbps/Full - flow control rx/tx

Dec  8 14:34:35 sun kernel: [   72.098698] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8911] device (enp9s0): carrier: link connected

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8917] device (enp9s0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8931] policy: auto-activating connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8944] device (enp9s0): Activation: starting connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8946] device (enp9s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8952] manager: NetworkManager state is now CONNECTING

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8956] device (enp9s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8963] device (enp9s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.9050] dhcp4 (enp9s0): activation: beginning transaction (timeout in 45 seconds)

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.9156] dhcp4 (enp9s0): dhclient started with pid 1134

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0015] dhcp4 (enp9s0):   address 192.168.1.35

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0015] dhcp4 (enp9s0):   plen 24 (255.255.255.0)

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0016] dhcp4 (enp9s0):   gateway 192.168.1.10

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0016] dhcp4 (enp9s0):   lease time 43200

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0016] dhcp4 (enp9s0):   nameserver '192.168.1.10'

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0016] dhcp4 (enp9s0): state changed unknown -> bound

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0032] device (enp9s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0043] device (enp9s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0047] device (enp9s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0054] manager: NetworkManager state is now CONNECTED_LOCAL

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0131] manager: NetworkManager state is now CONNECTED_SITE

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0133] policy: set 'DHCP' (enp9s0) as default for IPv4 routing and DNS

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0190] device (enp9s0): Activation: successful, device activated.

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0202] manager: NetworkManager state is now CONNECTED_GLOBAL

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0208] manager: startup complete

Dec  8 14:34:37 sun NetworkManager[741]: <info>  [1607434477.0001] policy: set 'DHCP' (enp9s0) as default for IPv6 routing and DNS

Dec  8 14:34:47 sun kernel: [   83.309425] logitech-hidpp-device 0003:046D:101B.0004: HID++ 1.0 device connected.

Dec  8 14:34:47 sun goa-daemon[1841]: goa-daemon version 3.30.1 starting

Dec  8 14:34:49 sun /cinnamon-killer-daemon: Bound Cinnamon restart to <Control><Alt>Escape.

Dec  8 14:34:50 sun NetworkManager[741]: <info>  [1607434490.1490] agent-manager: req[0x56499a1dbc10, :1.105/org.freedesktop.nm-applet/1000]: agent registered

Dec  8 14:36:13 sun kernel: [  170.302188] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)

Dec  8 14:52:42 sun NetworkManager[741]: <info>  [1607435562.5904] manager: sleep: sleep requested (sleeping: no  enabled: yes)

Dec  8 14:52:42 sun NetworkManager[741]: <info>  [1607435562.5907] manager: NetworkManager state is now ASLEEP

Dec  8 14:52:42 sun kernel: [ 1159.309884] PM: hibernation entry

Dec  8 14:52:42 sun kernel: [ 1159.310297] (NULL device *): firmware: direct-loading firmware iwlwifi-2030-6.ucode

Dec  8 14:52:42 sun kernel: [ 1159.310335] PM: Syncing filesystems ... 

Dec  8 21:05:24 sun kernel: [ 1159.354871] PM: done.

less /var/log/syslog

Dec  8 11:54:35 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.560' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 11:54:35 sun systemd[1]: Starting Hostname Service...

Dec  8 11:54:35 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 11:54:35 sun systemd[1]: Started Hostname Service.

Dec  8 11:55:32 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 12:02:09 sun smartd[1254]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 63 to 61

Dec  8 12:14:07 sun kernel: [19043.747543] perf: interrupt took too long (6263 > 6257), lowering kernel.perf_event_max_sample_rate to 31750

Dec  8 12:17:01 sun CRON[11355]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 12:30:01 sun CRON[11419]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 12:32:09 sun smartd[1254]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 61 to 62

Dec  8 12:33:51 sun systemd[1]: Started Run anacron jobs.

Dec  8 12:33:51 sun anacron[11437]: Anacron 2.3 started on 2020-12-08

Dec  8 12:33:51 sun anacron[11437]: Normal exit (0 jobs run)

Dec  8 12:33:51 sun systemd[1]: anacron.service: Succeeded.

Dec  8 12:58:02 sun Tor[1475]: Heartbeat: Tor's uptime is 5:59 hours, with 0 circuits open. I've sent 112 kB and received 509 kB.

Dec  8 12:58:02 sun Tor[1475]: Average packaged cell fullness: 76.908%. TLS write overhead: 6%

Dec  8 13:02:18 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.565' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 13:02:18 sun systemd[1]: Starting Hostname Service...

Dec  8 13:02:18 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 13:02:18 sun systemd[1]: Started Hostname Service.

Dec  8 13:02:48 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 13:03:51 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:03:51 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:03 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:03 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:10 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:10 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:14 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:04:14 sun rtkit-daemon[2319]: Supervising 7 threads of 5 processes of 1 users.

Dec  8 13:17:01 sun CRON[11943]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 13:28:29 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service' requested by ':1.572' (uid=1000 pid=12046 comm="/usr/lib/chromium/chromium --show-component-extens")

Dec  8 13:28:29 sun systemd[1]: Condition check resulted in Bluetooth service being skipped.

Dec  8 13:30:01 sun CRON[12246]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 13:31:51 sun systemd[1]: Started Run anacron jobs.

Dec  8 13:31:51 sun anacron[12265]: Anacron 2.3 started on 2020-12-08

Dec  8 13:31:51 sun anacron[12265]: Normal exit (0 jobs run)

Dec  8 13:31:51 sun systemd[1]: anacron.service: Succeeded.

Dec  8 13:56:09 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.577' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 13:56:09 sun systemd[1]: Starting Hostname Service...

Dec  8 13:56:09 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 13:56:09 sun systemd[1]: Started Hostname Service.

Dec  8 13:56:51 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 14:02:09 sun smartd[1254]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 71 to 70

Dec  8 14:02:09 sun smartd[1254]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 62 to 61

Dec  8 14:04:40 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.582' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 14:04:40 sun systemd[1]: Starting Hostname Service...

Dec  8 14:04:40 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 14:04:40 sun systemd[1]: Started Hostname Service.

Dec  8 14:05:10 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 14:06:08 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.584' (uid=1000 pid=3350 comm="firefox-esr ")

Dec  8 14:06:08 sun systemd[1]: Starting Hostname Service...

Dec  8 14:06:08 sun dbus-daemon[1251]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 14:06:08 sun systemd[1]: Started Hostname Service.

Dec  8 14:06:38 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 14:17:01 sun CRON[13104]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Dec  8 14:28:18 sun systemd[2157]: gnome-terminal-server.service: Succeeded.

Dec  8 14:30:01 sun CRON[13242]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)

Dec  8 14:30:22 sun x-session-manager[2174]: WARNING: t+27128,84272s: Requesting system shutdown...

Dec  8 14:30:22 sun x-session-manager[2174]: WARNING: t+27128,84419s: Attempting to shutdown using systemd...

Dec  8 14:30:22 sun systemd[2157]: at-spi-dbus-bus.service: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Stopped target Sound Card.

Dec  8 14:30:22 sun systemd[1]: Stopping Availability of block devices...

Dec  8 14:30:22 sun systemd[1]: Stopping Daemon for power management...

Dec  8 14:30:22 sun systemd[1]: systemd-rfkill.socket: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.

Dec  8 14:30:22 sun systemd[1]: Stopped target Timers.

Dec  8 14:30:22 sun systemd[1]: Stopping Authorization Manager...

Dec  8 14:30:22 sun systemd[1]: Stopping Manage, Install and Generate Color Profiles...

Dec  8 14:30:22 sun systemd[1]: man-db.timer: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Stopped Daily man-db regeneration.

Dec  8 14:30:22 sun systemd[1]: anacron.timer: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Stopped Trigger anacron every hour.

Dec  8 14:30:22 sun systemd[1]: apt-daily-upgrade.timer: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Stopped Daily apt upgrade and clean activities.

Dec  8 14:30:22 sun systemd[1]: apt-daily.timer: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Stopped Daily apt download activities.

Dec  8 14:30:22 sun systemd[1]: Stopping RealtimeKit Scheduling Policy Service...

Dec  8 14:30:22 sun systemd[1]: lvm2-lvmpolld.socket: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Closed LVM2 poll daemon socket.

Dec  8 14:30:22 sun systemd[1]: Stopped target Graphical Interface.

Dec  8 14:30:22 sun dbus-daemon[1251]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.5' (uid=0 pid=1258 comm="/usr/sbin/NetworkManager --no-daemon ")

Dec  8 14:30:22 sun systemd[1]: Stopping Light Display Manager...

Dec  8 14:30:22 sun systemd[1]: Stopping Accounts Service...

Dec  8 14:30:22 sun systemd[1]: Stopped target Multi-User System.

Dec  8 14:30:22 sun systemd[1]: Stopping Erlang Port Mapper Daemon...

Dec  8 14:30:22 sun systemd[1]: Stopping LSB: exim Mail Transport Agent...

Dec  8 14:30:22 sun systemd[1]: Stopping Glances...

Dec  8 14:30:22 sun systemd[1]: lm-sensors.service: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Stopped Initialize hardware monitoring sensors.

Dec  8 14:30:22 sun systemd[1]: Stopping A high performance web server and a reverse proxy server...

Dec  8 14:30:22 sun systemd[1]: tor.service: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Stopped Anonymizing overlay network for TCP (multi-instance-master).

Dec  8 14:30:22 sun systemd[1]: openvpn.service: Succeeded.

Dec  8 14:30:22 sun systemd[1]: Stopped OpenVPN service.

Dec  8 14:30:22 sun systemd[1]: Stopping LSB: Jitsi conference Focus...

Dec  8 14:34:31 sun systemd-modules-load[407]: Inserted module 'lp'

Dec  8 14:34:31 sun systemd-modules-load[407]: Inserted module 'ppdev'

Dec  8 14:34:31 sun systemd-modules-load[407]: Inserted module 'parport_pc'

Dec  8 14:34:31 sun systemd-tmpfiles[422]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:1] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher → /run/speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun systemd-tmpfiles[422]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:2] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.cache → /run/speech-dispatcher/.cache; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun systemd-tmpfiles[422]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:3] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.speech-dispatcher → /run/speech-dispatcher/.speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun systemd-tmpfiles[422]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:4] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.cache/speech-dispatcher → /run/speech-dispatcher/.cache/speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun systemd-tmpfiles[422]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:5] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/log → /run/speech-dispatcher/log; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun systemd[1]: Starting Flush Journal to Persistent Storage...

Dec  8 14:34:31 sun lvm[408]:   3 logical volume(s) in volume group "sun" monitored

Dec  8 14:34:31 sun systemd[1]: Started Flush Journal to Persistent Storage.

Dec  8 14:34:31 sun systemd[1]: Started udev Kernel Device Manager.

Dec  8 14:34:31 sun systemd[1]: Starting Show Plymouth Boot Screen...

Dec  8 14:34:31 sun systemd[1]: plymouth-start.service: Succeeded.

Dec  8 14:34:31 sun systemd[1]: Started Show Plymouth Boot Screen.

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.

Dec  8 14:34:31 sun systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.

Dec  8 14:34:31 sun systemd[1]: Created slice system-systemd\x2dbacklight.slice.

Dec  8 14:34:31 sun systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...

Dec  8 14:34:31 sun systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.

Dec  8 14:34:31 sun systemd-udevd[431]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.

Dec  8 14:34:31 sun systemd-udevd[454]: Using default interface naming scheme 'v240'.

Dec  8 14:34:31 sun systemd-udevd[454]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.

Dec  8 14:34:31 sun systemd[1]: Found device /dev/mapper/sun-swap.

Dec  8 14:34:31 sun systemd[1]: Found device /dev/mapper/sun-home.

Dec  8 14:34:31 sun systemd-udevd[432]: Using default interface naming scheme 'v240'.

Dec  8 14:34:31 sun systemd[1]: Found device SanDisk_SD6SF1M256GG56 5.

Dec  8 14:34:31 sun systemd-udevd[431]: Using default interface naming scheme 'v240'.

Dec  8 14:34:31 sun systemd-udevd[431]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.

Dec  8 14:34:31 sun systemd[1]: Found device SanDisk_SD6SF1M256GG56 1.

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in File System Check on Root Device being skipped.

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.

Dec  8 14:34:31 sun systemd[1]: Starting File System Check on /dev/mapper/sun-home...

Dec  8 14:34:31 sun systemd[1]: Starting Show Plymouth Boot Screen...

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in FUSE Control File System being skipped.

Dec  8 14:34:31 sun systemd[1]: Starting File System Check on /dev/disk/by-uuid/463f49ef-a972-4c1e-a652-65301e50cdcc...

Dec  8 14:34:31 sun systemd[1]: Activating swap /dev/mapper/sun-swap...

Dec  8 14:34:31 sun systemd[1]: Created slice system-lvm2\x2dpvscan.slice.

Dec  8 14:34:31 sun systemd[1]: Starting LVM event activation on device 254:0...

Dec  8 14:34:31 sun systemd[1]: Starting Cryptography Setup for sda5_crypt...

Dec  8 14:34:31 sun systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.

Dec  8 14:34:31 sun systemd[1]: Starting Load/Save RF Kill Switch Status...

Dec  8 14:34:31 sun systemd[1]: Started File System Check Daemon to report status.

Dec  8 14:34:31 sun systemd-cryptsetup[618]: Volume sda5_crypt already active.

Dec  8 14:34:31 sun systemd[1]: Activated swap /dev/mapper/sun-swap.

Dec  8 14:34:31 sun systemd[1]: Started Cryptography Setup for sda5_crypt.

Dec  8 14:34:31 sun systemd[1]: plymouth-start.service: Succeeded.

Dec  8 14:34:31 sun kernel: [    0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)

Dec  8 14:34:31 sun kernel: [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=/dev/mapper/sun-racine ro quiet

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

Dec  8 14:34:31 sun systemd-udevd[437]: Using default interface naming scheme 'v240'.

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256

Dec  8 14:34:31 sun kernel: [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-provided physical RAM map:

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable

Dec  8 14:34:31 sun systemd[1]: Started Show Plymouth Boot Screen.

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b065efff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000b065f000-0x00000000bae9efff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved

Dec  8 14:34:31 sun systemd-fsck[611]: /dev/mapper/sun-home: clean, 109810/11010048 files, 40336051/44027904 blocks

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved

Dec  8 14:34:31 sun systemd[1]: Started File System Check on /dev/mapper/sun-home.

Dec  8 14:34:31 sun kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fdffffff] usable

Dec  8 14:34:31 sun kernel: [    0.000000] NX (Execute Disable) protection: active

Dec  8 14:34:31 sun kernel: [    0.000000] SMBIOS 2.7 present.

Dec  8 14:34:31 sun kernel: [    0.000000] DMI: LENOVO 335337G/335337G, BIOS H6ETA0WW (2.18 ) 06/01/2018

Dec  8 14:34:31 sun kernel: [    0.000000] tsc: Fast TSC calibration using PIT

Dec  8 14:34:31 sun kernel: [    0.000000] tsc: Detected 1696.288 MHz processor

Dec  8 14:34:31 sun systemd[1]: Mounting /home...

Dec  8 14:34:31 sun kernel: [    0.003056] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

Dec  8 14:34:31 sun kernel: [    0.003059] e820: remove [mem 0x000a0000-0x000fffff] usable

Dec  8 14:34:31 sun kernel: [    0.003070] last_pfn = 0x1fe000 max_arch_pfn = 0x400000000

Dec  8 14:34:31 sun kernel: [    0.003077] MTRR default type: uncachable

Dec  8 14:34:31 sun kernel: [    0.003078] MTRR fixed ranges enabled:

Dec  8 14:34:31 sun kernel: [    0.003080]   00000-9FFFF write-back

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.

Dec  8 14:34:31 sun kernel: [    0.003081]   A0000-BFFFF uncachable

Dec  8 14:34:31 sun kernel: [    0.003082]   C0000-FFFFF write-protect

Dec  8 14:34:31 sun kernel: [    0.003083] MTRR variable ranges enabled:

Dec  8 14:34:31 sun kernel: [    0.003086]   0 base 0FFC00000 mask FFFC00000 write-protect

Dec  8 14:34:31 sun kernel: [    0.003087]   1 base 000000000 mask F80000000 write-back

Dec  8 14:34:31 sun kernel: [    0.003088]   2 base 080000000 mask FC0000000 write-back

Dec  8 14:34:31 sun kernel: [    0.003090]   3 base 0BC000000 mask FFC000000 uncachable

Dec  8 14:34:31 sun kernel: [    0.003091]   4 base 0BB000000 mask FFF000000 uncachable

Dec  8 14:34:31 sun systemd[1]: Reached target Local Encrypted Volumes.

Dec  8 14:34:31 sun kernel: [    0.003092]   5 base 100000000 mask F00000000 write-back

Dec  8 14:34:31 sun kernel: [    0.003093]   6 base 1FE000000 mask FFE000000 uncachable

Dec  8 14:34:31 sun kernel: [    0.003094]   7 disabled

Dec  8 14:34:31 sun kernel: [    0.003095]   8 disabled

Dec  8 14:34:31 sun kernel: [    0.003096]   9 disabled

Dec  8 14:34:31 sun kernel: [    0.004350] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  

Dec  8 14:34:31 sun kernel: [    0.004555] last_pfn = 0xb065f max_arch_pfn = 0x400000000

Dec  8 14:34:31 sun kernel: [    0.004760] found SMP MP-table at [mem 0x000f0100-0x000f010f]

Dec  8 14:34:31 sun systemd[1]: Reached target Swap.

Dec  8 14:34:31 sun kernel: [    0.004869] BRK [0x19bc01000, 0x19bc01fff] PGTABLE

Dec  8 14:34:31 sun kernel: [    0.004872] BRK [0x19bc02000, 0x19bc02fff] PGTABLE

Dec  8 14:34:31 sun kernel: [    0.004873] BRK [0x19bc03000, 0x19bc03fff] PGTABLE

Dec  8 14:34:31 sun kernel: [    0.004925] BRK [0x19bc04000, 0x19bc04fff] PGTABLE

Dec  8 14:34:31 sun kernel: [    0.004929] BRK [0x19bc05000, 0x19bc05fff] PGTABLE

Dec  8 14:34:31 sun systemd[1]: Started Load/Save RF Kill Switch Status.

Dec  8 14:34:31 sun kernel: [    0.005151] BRK [0x19bc06000, 0x19bc06fff] PGTABLE

Dec  8 14:34:31 sun kernel: [    0.005152] BRK [0x19bc07000, 0x19bc07fff] PGTABLE

Dec  8 14:34:31 sun kernel: [    0.005282] BRK [0x19bc08000, 0x19bc08fff] PGTABLE

Dec  8 14:34:31 sun kernel: [    0.005333] BRK [0x19bc09000, 0x19bc09fff] PGTABLE

Dec  8 14:34:31 sun kernel: [    0.005503] RAMDISK: [mem 0x3588d000-0x36c3dfff]

Dec  8 14:34:31 sun kernel: [    0.005508] ACPI: Early table checksum verification disabled

Dec  8 14:34:31 sun kernel: [    0.005586] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)

Dec  8 14:34:31 sun systemd-fsck[615]: /dev/sdb1: clean, 347/122160 files, 42499/487936 blocks

Dec  8 14:34:31 sun kernel: [    0.005592] ACPI: XSDT 0x00000000BAFFE170 0000A4 (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005599] ACPI: FACP 0x00000000BAFEB000 00010C (v05 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005608] ACPI: DSDT 0x00000000BAFED000 00E5E2 (v02 LENOVO IVB-CPT  00000000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.005613] ACPI: FACS 0x00000000BAF67000 000040

Dec  8 14:34:31 sun kernel: [    0.005617] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO TP-H6    00002180 PTL  00000001)

Dec  8 14:34:31 sun kernel: [    0.005622] ACPI: TCPA 0x00000000BAFFC000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)

Dec  8 14:34:31 sun lvm[617]:   3 logical volume(s) in volume group "sun" now active

Dec  8 14:34:31 sun kernel: [    0.005627] ACPI: ASF! 0x00000000BAFEC000 0000A5 (v32 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005632] ACPI: HPET 0x00000000BAFE9000 000038 (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005636] ACPI: APIC 0x00000000BAFE8000 000098 (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005640] ACPI: MCFG 0x00000000BAFE7000 00003C (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005645] ACPI: FPDT 0x00000000BAFE6000 000064 (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005649] ACPI: SSDT 0x00000000BAFE5000 0008A2 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.005654] ACPI: SSDT 0x00000000BAFE4000 000A92 (v01 PmRef  CpuPm    00003000 INTL 20061109)

Dec  8 14:34:31 sun systemd[1]: Started File System Check on /dev/disk/by-uuid/463f49ef-a972-4c1e-a652-65301e50cdcc.

Dec  8 14:34:31 sun kernel: [    0.005658] ACPI: DMAR 0x00000000BAFE3000 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)

Dec  8 14:34:31 sun kernel: [    0.005663] ACPI: UEFI 0x00000000BAFE2000 00003E (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005668] ACPI: UEFI 0x00000000BAFE1000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)

Dec  8 14:34:31 sun kernel: [    0.005672] ACPI: POAT 0x00000000BAFE0000 000055 (v03 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005677] ACPI: UEFI 0x00000000BAFDF000 0002BA (v01 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005681] ACPI: DBG2 0x00000000BAFDE000 00006B (v00 LENOVO TP-H6    00002180 PTL  00000002)

Dec  8 14:34:31 sun kernel: [    0.005693] ACPI: Local APIC address 0xfee00000

Dec  8 14:34:31 sun kernel: [    0.005807] No NUMA configuration found

Dec  8 14:34:31 sun kernel: [    0.005808] Faking a node at [mem 0x0000000000000000-0x00000001fdffffff]

Dec  8 14:34:31 sun kernel: [    0.005813] NODE_DATA(0) allocated [mem 0x1fdff8000-0x1fdffcfff]

Dec  8 14:34:31 sun kernel: [    0.005852] Zone ranges:

Dec  8 14:34:31 sun kernel: [    0.005854]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

Dec  8 14:34:31 sun systemd[1]: Mounting /boot...

Dec  8 14:34:31 sun kernel: [    0.005856]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

Dec  8 14:34:31 sun kernel: [    0.005857]   Normal   [mem 0x0000000100000000-0x00000001fdffffff]

Dec  8 14:34:31 sun kernel: [    0.005859]   Device   empty

Dec  8 14:34:31 sun kernel: [    0.005860] Movable zone start for each node

Dec  8 14:34:31 sun kernel: [    0.005861] Early memory node ranges

Dec  8 14:34:31 sun kernel: [    0.005862]   node   0: [mem 0x0000000000001000-0x000000000009cfff]

Dec  8 14:34:31 sun kernel: [    0.005863]   node   0: [mem 0x0000000000100000-0x000000001fffffff]

Dec  8 14:34:31 sun systemd[1]: Mounted /home.

Dec  8 14:34:31 sun kernel: [    0.005864]   node   0: [mem 0x0000000020200000-0x0000000040003fff]

Dec  8 14:34:31 sun kernel: [    0.005865]   node   0: [mem 0x0000000040005000-0x00000000b065efff]

Dec  8 14:34:31 sun kernel: [    0.005866]   node   0: [mem 0x0000000100000000-0x00000001fdffffff]

Dec  8 14:34:31 sun kernel: [    0.005871] Reserved but unavailable: 100 pages

Dec  8 14:34:31 sun kernel: [    0.005873] Initmem setup node 0 [mem 0x0000000000001000-0x00000001fdffffff]

Dec  8 14:34:31 sun kernel: [    0.005875] On node 0 totalpages: 1762298

Dec  8 14:34:31 sun kernel: [    0.005877]   DMA zone: 64 pages used for memmap

Dec  8 14:34:31 sun systemd[1]: Mounted /boot.

Dec  8 14:34:31 sun kernel: [    0.005878]   DMA zone: 21 pages reserved

Dec  8 14:34:31 sun kernel: [    0.005879]   DMA zone: 3996 pages, LIFO batch:0

Dec  8 14:34:31 sun kernel: [    0.006037]   DMA32 zone: 11218 pages used for memmap

Dec  8 14:34:31 sun kernel: [    0.006039]   DMA32 zone: 717918 pages, LIFO batch:63

Dec  8 14:34:31 sun kernel: [    0.037203]   Normal zone: 16256 pages used for memmap

Dec  8 14:34:31 sun kernel: [    0.037205]   Normal zone: 1040384 pages, LIFO batch:63

Dec  8 14:34:31 sun systemd[1]: Reached target Local File Systems.

Dec  8 14:34:31 sun systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...

Dec  8 14:34:31 sun systemd[1]: Starting Enable support for additional executable binary formats...

Dec  8 14:34:31 sun systemd[1]: Starting Load AppArmor profiles...

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.

Dec  8 14:34:31 sun systemd[1]: Starting Create Volatile Files and Directories...

Dec  8 14:34:31 sun systemd[1]: Starting Set console font and keymap...

Dec  8 14:34:31 sun systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 656 (update-binfmts)

Dec  8 14:34:31 sun systemd[1]: Mounting Arbitrary Executable File Formats File System...

Dec  8 14:34:31 sun systemd[1]: Received SIGRTMIN+20 from PID 207 (plymouthd).

Dec  8 14:34:31 sun systemd[1]: plymouth-read-write.service: Succeeded.

Dec  8 14:34:31 sun kernel: [    0.076859] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]

Dec  8 14:34:31 sun kernel: [    0.077130] ACPI: PM-Timer IO Port: 0x408

Dec  8 14:34:31 sun kernel: [    0.077133] ACPI: Local APIC address 0xfee00000

Dec  8 14:34:31 sun kernel: [    0.077143] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

Dec  8 14:34:31 sun kernel: [    0.077144] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

Dec  8 14:34:31 sun kernel: [    0.077157] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

Dec  8 14:34:31 sun systemd-tmpfiles[658]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:1] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher → /run/speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun kernel: [    0.077159] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

Dec  8 14:34:31 sun kernel: [    0.077162] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

Dec  8 14:34:31 sun kernel: [    0.077163] ACPI: IRQ0 used by override.

Dec  8 14:34:31 sun kernel: [    0.077165] ACPI: IRQ9 used by override.

Dec  8 14:34:31 sun kernel: [    0.077168] Using ACPI (MADT) for SMP configuration information

Dec  8 14:34:31 sun kernel: [    0.077170] ACPI: HPET id: 0x8086a301 base: 0xfed00000

Dec  8 14:34:31 sun kernel: [    0.077177] smpboot: Allowing 8 CPUs, 4 hotplug CPUs

Dec  8 14:34:31 sun kernel: [    0.077206] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

Dec  8 14:34:31 sun systemd-tmpfiles[658]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:2] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.cache → /run/speech-dispatcher/.cache; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun kernel: [    0.077209] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]

Dec  8 14:34:31 sun kernel: [    0.077210] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]

Dec  8 14:34:31 sun kernel: [    0.077211] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

Dec  8 14:34:31 sun kernel: [    0.077211] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

Dec  8 14:34:31 sun kernel: [    0.077214] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]

Dec  8 14:34:31 sun kernel: [    0.077216] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]

Dec  8 14:34:31 sun systemd-tmpfiles[658]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:3] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.speech-dispatcher → /run/speech-dispatcher/.speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun kernel: [    0.077218] PM: Registered nosave memory: [mem 0xb065f000-0xbae9efff]

Dec  8 14:34:31 sun kernel: [    0.077219] PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff]

Dec  8 14:34:31 sun kernel: [    0.077220] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]

Dec  8 14:34:31 sun kernel: [    0.077220] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff]

Dec  8 14:34:31 sun kernel: [    0.077221] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]

Dec  8 14:34:31 sun kernel: [    0.077222] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]

Dec  8 14:34:31 sun kernel: [    0.077223] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]

Dec  8 14:34:31 sun kernel: [    0.077224] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

Dec  8 14:34:31 sun systemd-tmpfiles[658]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:4] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.cache/speech-dispatcher → /run/speech-dispatcher/.cache/speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun kernel: [    0.077224] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]

Dec  8 14:34:31 sun kernel: [    0.077225] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]

Dec  8 14:34:31 sun kernel: [    0.077226] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]

Dec  8 14:34:31 sun kernel: [    0.077227] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]

Dec  8 14:34:31 sun kernel: [    0.077228] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]

Dec  8 14:34:31 sun kernel: [    0.077229] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]

Dec  8 14:34:31 sun kernel: [    0.077229] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]

Dec  8 14:34:31 sun kernel: [    0.077230] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

Dec  8 14:34:31 sun kernel: [    0.077231] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]

Dec  8 14:34:31 sun kernel: [    0.077232] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]

Dec  8 14:34:31 sun kernel: [    0.077234] [mem 0xbfa00000-0xf7ffffff] available for PCI devices

Dec  8 14:34:31 sun kernel: [    0.077236] Booting paravirtualized kernel on bare hardware

Dec  8 14:34:31 sun systemd-tmpfiles[658]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:5] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/log → /run/speech-dispatcher/log; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:34:31 sun kernel: [    0.077239] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

Dec  8 14:34:31 sun kernel: [    0.250134] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0

Dec  8 14:34:31 sun kernel: [    0.250146] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1

Dec  8 14:34:31 sun kernel: [    0.250484] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144

Dec  8 14:34:31 sun kernel: [    0.250495] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152

Dec  8 14:34:31 sun kernel: [    0.250497] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 

Dec  8 14:34:31 sun systemd[1]: Started Tell Plymouth To Write Out Runtime Data.

Dec  8 14:34:31 sun kernel: [    0.250530] Built 1 zonelists, mobility grouping on.  Total pages: 1734739

Dec  8 14:34:31 sun kernel: [    0.250532] Policy zone: Normal

Dec  8 14:34:31 sun kernel: [    0.250534] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=/dev/mapper/sun-racine ro quiet

Dec  8 14:34:31 sun kernel: [    0.256143] Calgary: detecting Calgary via BIOS EBDA area

Dec  8 14:34:31 sun kernel: [    0.256145] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

Dec  8 14:34:31 sun kernel: [    0.281488] Memory: 6824112K/7049192K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 225080K reserved, 0K cma-reserved)

Dec  8 14:34:31 sun systemd[1]: Started Set console font and keymap.

Dec  8 14:34:31 sun kernel: [    0.281625] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

Dec  8 14:34:31 sun kernel: [    0.281633] Kernel/User page tables isolation: enabled

Dec  8 14:34:31 sun kernel: [    0.281695] ftrace: allocating 31872 entries in 125 pages

Dec  8 14:34:31 sun kernel: [    0.301553] rcu: Hierarchical RCU implementation.

Dec  8 14:34:31 sun kernel: [    0.301556] rcu:   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.

Dec  8 14:34:31 sun kernel: [    0.301557] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8

Dec  8 14:34:31 sun kernel: [    0.306556] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16

Dec  8 14:34:31 sun apparmor.systemd[657]: Restarting AppArmor

Dec  8 14:34:31 sun kernel: [    0.308536] Console: colour VGA+ 80x25

Dec  8 14:34:31 sun kernel: [    0.308543] console [tty0] enabled

Dec  8 14:34:31 sun kernel: [    0.308567] ACPI: Core revision 20180810

Dec  8 14:34:31 sun kernel: [    0.308925] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

Dec  8 14:34:31 sun kernel: [    0.308939] hpet clockevent registered

Dec  8 14:34:31 sun kernel: [    0.308945] APIC: Switch to symmetric I/O mode setup

Dec  8 14:34:31 sun apparmor.systemd[657]: Reloading AppArmor profiles

Dec  8 14:34:31 sun kernel: [    0.308947] DMAR: Host address width 36

Dec  8 14:34:31 sun kernel: [    0.308949] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

Dec  8 14:34:31 sun kernel: [    0.308955] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a

Dec  8 14:34:31 sun kernel: [    0.308956] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

Dec  8 14:34:31 sun kernel: [    0.308960] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a

Dec  8 14:34:31 sun kernel: [    0.308961] DMAR: RMRR base: 0x000000ba2ba000 end: 0x000000ba2d0fff

Dec  8 14:34:31 sun kernel: [    0.308965] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff

Dec  8 14:34:31 sun systemd[1]: Started LVM event activation on device 254:0.

Dec  8 14:34:31 sun kernel: [    0.308967] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1

Dec  8 14:34:31 sun kernel: [    0.308968] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

Dec  8 14:34:31 sun kernel: [    0.308970] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.

Dec  8 14:34:31 sun kernel: [    0.309529] DMAR-IR: Enabled IRQ remapping in x2apic mode

Dec  8 14:34:31 sun kernel: [    0.309531] x2apic enabled

Dec  8 14:34:31 sun kernel: [    0.309539] Switched APIC routing to cluster x2apic.

Dec  8 14:34:31 sun kernel: [    0.310009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

Dec  8 14:34:31 sun kernel: [    0.328944] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1873749fe79, max_idle_ns: 440795217464 ns

Dec  8 14:34:31 sun kernel: [    0.328965] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.57 BogoMIPS (lpj=6785152)

Dec  8 14:34:31 sun kernel: [    0.328969] pid_max: default: 32768 minimum: 301

Dec  8 14:34:31 sun systemd[1]: Mounted Arbitrary Executable File Formats File System.

Dec  8 14:34:31 sun kernel: [    0.329013] Security Framework initialized

Dec  8 14:34:31 sun kernel: [    0.329014] Yama: disabled by default; enable with sysctl kernel.yama.*

Dec  8 14:34:31 sun kernel: [    0.329039] AppArmor: AppArmor initialized

Dec  8 14:34:31 sun kernel: [    0.330678] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

Dec  8 14:34:31 sun kernel: [    0.331511] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

Dec  8 14:34:31 sun kernel: [    0.331550] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.331578] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.331878] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

Dec  8 14:34:31 sun systemd[1]: Started Enable support for additional executable binary formats.

Dec  8 14:34:31 sun kernel: [    0.331879] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

Dec  8 14:34:31 sun kernel: [    0.331903] process: using mwait in idle threads

Dec  8 14:34:31 sun kernel: [    0.331906] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8

Dec  8 14:34:31 sun kernel: [    0.331908] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

Dec  8 14:34:31 sun kernel: [    0.331910] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

Dec  8 14:34:31 sun kernel: [    0.331911] Spectre V2 : Mitigation: Full generic retpoline

Dec  8 14:34:31 sun kernel: [    0.331912] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

Dec  8 14:34:31 sun kernel: [    0.331913] Spectre V2 : Enabling Restricted Speculation for firmware calls

Dec  8 14:34:31 sun apparmor.systemd[657]: Skipping profile in /etc/apparmor.d/disable: usr.bin.thunderbird

Dec  8 14:34:31 sun kernel: [    0.331924] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

Dec  8 14:34:31 sun kernel: [    0.331925] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl

Dec  8 14:34:31 sun kernel: [    0.331926] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp

Dec  8 14:34:31 sun systemd[1]: Started Create Volatile Files and Directories.

Dec  8 14:34:31 sun kernel: [    0.331969] MDS: Vulnerable: Clear CPU buffers attempted, no microcode

Dec  8 14:34:31 sun kernel: [    0.332245] Freeing SMP alternatives memory: 24K

Dec  8 14:34:31 sun kernel: [    0.337041] TSC deadline timer enabled

Dec  8 14:34:31 sun kernel: [    0.337045] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)

Dec  8 14:34:31 sun systemd[1]: Starting Update UTMP about System Boot/Shutdown...

Dec  8 14:34:31 sun kernel: [    0.337183] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.

Dec  8 14:34:31 sun kernel: [    0.337215] ... version:                3

Dec  8 14:34:31 sun kernel: [    0.337216] ... bit width:              48

Dec  8 14:34:31 sun kernel: [    0.337217] ... generic registers:      4

Dec  8 14:34:31 sun systemd[1]: Starting Network Time Synchronization...

Dec  8 14:34:31 sun systemd[1]: Started Update UTMP about System Boot/Shutdown.

Dec  8 14:34:31 sun systemd[1]: Started Load AppArmor profiles.

Dec  8 14:34:31 sun systemd[1]: Starting Raise network interfaces...

Dec  8 14:34:31 sun systemd[1]: Started Raise network interfaces.

Dec  8 14:34:31 sun systemd[1]: Started Network Time Synchronization.

Dec  8 14:34:31 sun systemd[1]: Reached target System Time Synchronized.

Dec  8 14:34:31 sun systemd[1]: Reached target System Initialization.

Dec  8 14:34:31 sun systemd[1]: Listening on PC/SC Smart Card Daemon Activation Socket.

Dec  8 14:34:31 sun systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.

Dec  8 14:34:31 sun systemd[1]: Listening on CUPS Scheduler.

Dec  8 14:34:31 sun kernel: [    0.337218] ... value mask:             0000ffffffffffff

Dec  8 14:34:31 sun systemd[1]: Started Trigger anacron every hour.

Dec  8 14:34:31 sun kernel: [    0.337218] ... max period:             00007fffffffffff

Dec  8 14:34:31 sun kernel: [    0.337219] ... fixed-purpose events:   3

Dec  8 14:34:31 sun kernel: [    0.337220] ... event mask:             000000070000000f

Dec  8 14:34:31 sun kernel: [    0.337272] rcu: Hierarchical SRCU implementation.

Dec  8 14:34:31 sun kernel: [    0.337804] random: crng done (trusting CPU's manufacturer)

Dec  8 14:34:31 sun kernel: [    0.338382] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

Dec  8 14:34:31 sun kernel: [    0.338476] smp: Bringing up secondary CPUs ...

Dec  8 14:34:31 sun systemd[1]: Started CUPS Scheduler.

Dec  8 14:34:31 sun kernel: [    0.338585] x86: Booting SMP configuration:

Dec  8 14:34:31 sun kernel: [    0.338587] .... node  #0, CPUs:      #1

Dec  8 14:34:31 sun kernel: [    0.341176] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.

Dec  8 14:34:31 sun kernel: [    0.341176]  #2 #3

Dec  8 14:34:31 sun kernel: [    0.345016] smp: Brought up 1 node, 4 CPUs

Dec  8 14:34:31 sun kernel: [    0.345016] smpboot: Max logical packages: 2

Dec  8 14:34:31 sun systemd[1]: Reached target Paths.

Dec  8 14:34:31 sun kernel: [    0.345016] smpboot: Total of 4 processors activated (13570.30 BogoMIPS)

Dec  8 14:34:31 sun kernel: [    0.349295] devtmpfs: initialized

Dec  8 14:34:31 sun kernel: [    0.349295] x86/mm: Memory block size: 128MB

Dec  8 14:34:31 sun kernel: [    0.349814] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)

Dec  8 14:34:31 sun kernel: [    0.349814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

Dec  8 14:34:31 sun kernel: [    0.349814] futex hash table entries: 2048 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.349814] pinctrl core: initialized pinctrl subsystem

Dec  8 14:34:31 sun kernel: [    0.349814] NET: Registered protocol family 16

Dec  8 14:34:31 sun systemd[1]: Listening on Erlang Port Mapper Daemon Activation Socket.

Dec  8 14:34:31 sun kernel: [    0.349814] audit: initializing netlink subsys (disabled)

Dec  8 14:34:31 sun kernel: [    0.349814] audit: type=2000 audit(1607434403.040:1): state=initialized audit_enabled=0 res=1

Dec  8 14:34:31 sun kernel: [    0.349814] cpuidle: using governor ladder

Dec  8 14:34:31 sun kernel: [    0.349814] cpuidle: using governor menu

Dec  8 14:34:31 sun kernel: [    0.349814] ACPI: bus type PCI registered

Dec  8 14:34:31 sun kernel: [    0.349814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

Dec  8 14:34:31 sun systemd[1]: Listening on UUID daemon activation socket.

Dec  8 14:34:31 sun kernel: [    0.349814] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)

Dec  8 14:34:31 sun kernel: [    0.349814] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820

Dec  8 14:34:31 sun kernel: [    0.349814] PCI: Using configuration type 1 for base access

Dec  8 14:34:31 sun kernel: [    0.349814] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

Dec  8 14:34:31 sun kernel: [    0.349814] mtrr: your CPUs had inconsistent variable MTRR settings

Dec  8 14:34:31 sun systemd[1]: Started Daily rotation of log files.

Dec  8 14:34:31 sun kernel: [    0.349814] mtrr: probably your BIOS does not setup all CPUs.

Dec  8 14:34:31 sun kernel: [    0.349814] mtrr: corrected configuration.

Dec  8 14:34:31 sun kernel: [    0.350035] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Module Device)

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Processor Device)

Dec  8 14:34:31 sun systemd[1]: Started Daily apt download activities.

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(3.0 _SCP Extensions)

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Processor Aggregator Device)

Dec  8 14:34:31 sun systemd[1]: Started Daily man-db regeneration.

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Linux-Dell-Video)

Dec  8 14:34:31 sun kernel: [    0.350035] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

Dec  8 14:34:31 sun kernel: [    0.366943] ACPI: 3 ACPI AML tables successfully acquired and loaded

Dec  8 14:34:31 sun kernel: [    0.370623] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

Dec  8 14:34:31 sun kernel: [    0.371289] ACPI: Dynamic OEM Table Load:

Dec  8 14:34:31 sun kernel: [    0.371302] ACPI: SSDT 0xFFFF8ACEB50E4000 00096A (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)

Dec  8 14:34:31 sun systemd[1]: Started Daily apt upgrade and clean activities.

Dec  8 14:34:31 sun kernel: [    0.371889] ACPI: Dynamic OEM Table Load:

Dec  8 14:34:31 sun kernel: [    0.371897] ACPI: SSDT 0xFFFF8ACEB50C2C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.372291] ACPI: Dynamic OEM Table Load:

Dec  8 14:34:31 sun kernel: [    0.372298] ACPI: SSDT 0xFFFF8ACEB50CFA00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)

Dec  8 14:34:31 sun kernel: [    0.373547] ACPI: EC: EC started

Dec  8 14:34:31 sun kernel: [    0.373548] ACPI: EC: interrupt blocked

Dec  8 14:34:31 sun systemd[1]: Started Daily Cleanup of Temporary Directories.

Dec  8 14:34:31 sun kernel: [    0.809130] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC

Dec  8 14:34:31 sun kernel: [    0.809133] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62

Dec  8 14:34:31 sun kernel: [    0.809135] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions

Dec  8 14:34:31 sun kernel: [    0.809136] ACPI: Interpreter enabled

Dec  8 14:34:31 sun kernel: [    0.809172] ACPI: (supports S0 S3 S4 S5)

Dec  8 14:34:31 sun kernel: [    0.809173] ACPI: Using IOAPIC for interrupt routing

Dec  8 14:34:31 sun kernel: [    0.809212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

Dec  8 14:34:31 sun systemd[1]: Reached target Timers.

Dec  8 14:34:31 sun kernel: [    0.809572] ACPI: Enabled 7 GPEs in block 00 to 3F

Dec  8 14:34:31 sun kernel: [    0.819034] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])

Dec  8 14:34:31 sun kernel: [    0.819041] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

Dec  8 14:34:31 sun kernel: [    0.819219] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

Dec  8 14:34:31 sun kernel: [    0.819820] PCI host bridge to bus 0000:00

Dec  8 14:34:31 sun kernel: [    0.819823] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

Dec  8 14:34:31 sun systemd[1]: Listening on D-Bus System Message Bus Socket.

Dec  8 14:34:31 sun kernel: [    0.819825] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

Dec  8 14:34:31 sun kernel: [    0.819827] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

Dec  8 14:34:31 sun kernel: [    0.819829] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]

Dec  8 14:34:31 sun kernel: [    0.819830] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]

Dec  8 14:34:31 sun systemd[1]: Reached target Sockets.

Dec  8 14:34:31 sun kernel: [    0.819832] pci_bus 0000:00: root bus resource [bus 00-3e]

Dec  8 14:34:31 sun kernel: [    0.819843] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000

Dec  8 14:34:31 sun kernel: [    0.819967] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000

Dec  8 14:34:31 sun kernel: [    0.819982] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]

Dec  8 14:34:31 sun systemd[1]: Reached target Basic System.

Dec  8 14:34:31 sun kernel: [    0.819990] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.819995] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]

Dec  8 14:34:31 sun kernel: [    0.820143] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330

Dec  8 14:34:31 sun kernel: [    0.820173] pci 0000:00:14.0: reg 0x10: [mem 0xe1700000-0xe170ffff 64bit]

Dec  8 14:34:31 sun kernel: [    0.820261] pci 0000:00:14.0: PME# supported from D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.820366] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000

Dec  8 14:34:31 sun systemd[1]: Starting Switcheroo Control Proxy service...

Dec  8 14:34:31 sun kernel: [    0.820398] pci 0000:00:16.0: reg 0x10: [mem 0xe1715000-0xe171500f 64bit]

Dec  8 14:34:31 sun kernel: [    0.820488] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.820605] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320

Dec  8 14:34:31 sun kernel: [    0.820634] pci 0000:00:1a.0: reg 0x10: [mem 0xe171a000-0xe171a3ff]

Dec  8 14:34:31 sun kernel: [    0.820735] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.820841] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300

Dec  8 14:34:31 sun kernel: [    0.820870] pci 0000:00:1b.0: reg 0x10: [mem 0xe1710000-0xe1713fff 64bit]

Dec  8 14:34:31 sun systemd[1]: Started Manage Sound Card State (restore and store).

Dec  8 14:34:31 sun kernel: [    0.820966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.821077] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400

Dec  8 14:34:31 sun kernel: [    0.821192] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.821308] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400

Dec  8 14:34:31 sun kernel: [    0.821415] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.821525] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400

Dec  8 14:34:31 sun alsactl[720]: alsactl 1.1.8 daemon started

Dec  8 14:34:31 sun kernel: [    0.821633] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.821742] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400

Dec  8 14:34:31 sun kernel: [    0.821848] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.821963] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320

Dec  8 14:34:31 sun systemd[1]: Starting Initialize hardware monitoring sensors...

Dec  8 14:34:31 sun kernel: [    0.821991] pci 0000:00:1d.0: reg 0x10: [mem 0xe1719000-0xe17193ff]

Dec  8 14:34:31 sun kernel: [    0.822092] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.822197] pci 0000:00:1f.0: [8086:1e58] type 00 class 0x060100

Dec  8 14:34:31 sun kernel: [    0.822410] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601

Dec  8 14:34:31 sun systemd[1]: Starting Disk Manager...

Dec  8 14:34:31 sun kernel: [    0.822433] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]

Dec  8 14:34:31 sun kernel: [    0.822444] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]

Dec  8 14:34:31 sun kernel: [    0.822455] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]

Dec  8 14:34:31 sun kernel: [    0.822465] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]

Dec  8 14:34:31 sun kernel: [    0.822474] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]

Dec  8 14:34:31 sun systemd[1]: Started Self Monitoring and Reporting Technology (SMART) Daemon.

Dec  8 14:34:31 sun kernel: [    0.822484] pci 0000:00:1f.2: reg 0x24: [mem 0xe1718000-0xe17187ff]

Dec  8 14:34:31 sun kernel: [    0.822536] pci 0000:00:1f.2: PME# supported from D3hot

Dec  8 14:34:31 sun kernel: [    0.822632] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500

Dec  8 14:34:31 sun kernel: [    0.822657] pci 0000:00:1f.3: reg 0x10: [mem 0xe1714000-0xe17140ff 64bit]

Dec  8 14:34:31 sun kernel: [    0.822683] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]

Dec  8 14:34:31 sun kernel: [    0.822865] pci 0000:00:1c.0: PCI bridge to [bus 02]

Dec  8 14:34:31 sun kernel: [    0.822997] pci 0000:03:00.0: [8086:0888] type 00 class 0x028000

Dec  8 14:34:31 sun systemd[1]: Starting Save/Restore Sound Card State...

Dec  8 14:34:31 sun kernel: [    0.823073] pci 0000:03:00.0: reg 0x10: [mem 0xe1600000-0xe1601fff 64bit]

Dec  8 14:34:31 sun kernel: [    0.823361] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.823635] pci 0000:00:1c.1: PCI bridge to [bus 03]

Dec  8 14:34:31 sun kernel: [    0.823642] pci 0000:00:1c.1:   bridge window [mem 0xe1600000-0xe16fffff]

Dec  8 14:34:31 sun systemd[1]: Starting System Logging Service...

Dec  8 14:34:31 sun rsyslogd: imuxsock: Acquired UNIX socket '/run/systemd/journal/syslog' (fd 3) from systemd.  [v8.1901.0]

Dec  8 14:34:31 sun rsyslogd:  [origin software="rsyslogd" swVersion="8.1901.0" x-pid="725" x-info="https://www.rsyslog.com"] start

Dec  8 14:34:31 sun kernel: [    0.823784] pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000

Dec  8 14:34:31 sun kernel: [    0.823895] pci 0000:04:00.0: reg 0x10: [mem 0xe0e00000-0xe0e00fff]

Dec  8 14:34:31 sun kernel: [    0.824444] pci 0000:04:00.0: supports D1 D2

Dec  8 14:34:31 sun kernel: [    0.824445] pci 0000:04:00.0: PME# supported from D1 D2 D3hot

Dec  8 14:34:31 sun kernel: [    0.824783] pci 0000:00:1c.2: PCI bridge to [bus 04-08]

Dec  8 14:34:31 sun kernel: [    0.824787] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]

Dec  8 14:34:31 sun kernel: [    0.824792] pci 0000:00:1c.2:   bridge window [mem 0xe0e00000-0xe15fffff]

Dec  8 14:34:31 sun kernel: [    0.824799] pci 0000:00:1c.2:   bridge window [mem 0xe0400000-0xe0bfffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.824891] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000

Dec  8 14:34:31 sun kernel: [    0.824931] pci 0000:09:00.0: reg 0x10: [io  0x3000-0x30ff]

Dec  8 14:34:31 sun kernel: [    0.824970] pci 0000:09:00.0: reg 0x18: [mem 0xe0c04000-0xe0c04fff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.824993] pci 0000:09:00.0: reg 0x20: [mem 0xe0c00000-0xe0c03fff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.825127] pci 0000:09:00.0: supports D1 D2

Dec  8 14:34:31 sun kernel: [    0.825128] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold

Dec  8 14:34:31 sun kernel: [    0.825288] pci 0000:00:1c.3: PCI bridge to [bus 09]

Dec  8 14:34:31 sun kernel: [    0.825293] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]

Dec  8 14:34:31 sun kernel: [    0.825297] pci 0000:00:1c.3:   bridge window [mem 0xe0d00000-0xe0dfffff]

Dec  8 14:34:31 sun kernel: [    0.825304] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe0cfffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.825934] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)

Dec  8 14:34:31 sun kernel: [    0.826005] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)

Dec  8 14:34:31 sun kernel: [    0.826073] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)

Dec  8 14:34:31 sun kernel: [    0.826143] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7

Dec  8 14:34:31 sun kernel: [    0.826211] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.

Dec  8 14:34:31 sun kernel: [    0.826278] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.

Dec  8 14:34:31 sun kernel: [    0.826346] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7

Dec  8 14:34:31 sun kernel: [    0.826412] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)

Dec  8 14:34:31 sun kernel: [    0.827676] ACPI: EC: interrupt unblocked

Dec  8 14:34:31 sun kernel: [    0.827685] ACPI: EC: event unblocked

Dec  8 14:34:31 sun kernel: [    0.827692] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62

Dec  8 14:34:31 sun kernel: [    0.827694] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events

Dec  8 14:34:31 sun kernel: [    0.827787] pci 0000:00:02.0: vgaarb: setting as boot VGA device

Dec  8 14:34:31 sun kernel: [    0.827787] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

Dec  8 14:34:31 sun kernel: [    0.827787] pci 0000:00:02.0: vgaarb: bridge control possible

Dec  8 14:34:31 sun kernel: [    0.827787] vgaarb: loaded

Dec  8 14:34:31 sun kernel: [    0.827787] pps_core: LinuxPPS API ver. 1 registered

Dec  8 14:34:31 sun kernel: [    0.827787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

Dec  8 14:34:31 sun kernel: [    0.827787] PTP clock support registered

Dec  8 14:34:31 sun kernel: [    0.827787] EDAC MC: Ver: 3.0.0

Dec  8 14:34:31 sun kernel: [    0.827787] PCI: Using ACPI for IRQ routing

Dec  8 14:34:31 sun kernel: [    0.830104] PCI: pci_cache_line_size set to 64 bytes

Dec  8 14:34:31 sun kernel: [    0.830233] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]

Dec  8 14:34:31 sun kernel: [    0.830235] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]

Dec  8 14:34:31 sun kernel: [    0.830236] e820: reserve RAM buffer [mem 0xb065f000-0xb3ffffff]

Dec  8 14:34:31 sun kernel: [    0.830237] e820: reserve RAM buffer [mem 0x1fe000000-0x1ffffffff]

Dec  8 14:34:31 sun kernel: [    0.830376] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

Dec  8 14:34:31 sun kernel: [    0.830376] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

Dec  8 14:34:31 sun kernel: [    0.831026] clocksource: Switched to clocksource tsc-early

Dec  8 14:34:31 sun kernel: [    0.842988] VFS: Disk quotas dquot_6.6.0

Dec  8 14:34:31 sun kernel: [    0.843010] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

Dec  8 14:34:31 sun kernel: [    0.843150] AppArmor: AppArmor Filesystem Enabled

Dec  8 14:34:31 sun kernel: [    0.843173] pnp: PnP ACPI init

Dec  8 14:34:31 sun kernel: [    0.843370] system 00:00: [io  0x0680-0x069f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843372] system 00:00: [io  0x2000-0x2003] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843374] system 00:00: [io  0x0800-0x080f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843376] system 00:00: [io  0xffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843378] system 00:00: [io  0x0400-0x0453] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843380] system 00:00: [io  0x0458-0x047f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843381] system 00:00: [io  0x0500-0x057f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843383] system 00:00: [io  0x1600-0x16fe] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843385] system 00:00: [io  0xfe00] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843387] system 00:00: [io  0x0700-0x070f] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843394] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)

Dec  8 14:34:31 sun kernel: [    0.843427] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)

Dec  8 14:34:31 sun kernel: [    0.843495] system 00:02: [io  0x0454-0x0457] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843500] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

Dec  8 14:34:31 sun kernel: [    0.843528] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)

Dec  8 14:34:31 sun kernel: [    0.843553] pnp 00:04: Plug and Play ACPI device, IDs LEN0051 PNP0f13 (active)

Dec  8 14:34:31 sun kernel: [    0.843622] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)

Dec  8 14:34:31 sun kernel: [    0.843801] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843803] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843805] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843807] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843809] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843811] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843813] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved

Dec  8 14:34:31 sun kernel: [    0.843815] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843817] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved

Dec  8 14:34:31 sun kernel: [    0.843819] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved

Dec  8 14:34:31 sun kernel: [    0.843821] system 00:06: [mem 0xfffff000-0xffffffff] has been reserved

Dec  8 14:34:31 sun kernel: [    0.843825] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

Dec  8 14:34:31 sun kernel: [    0.844739] pnp: PnP ACPI: found 7 devices

Dec  8 14:34:31 sun kernel: [    0.851035] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

Dec  8 14:34:31 sun kernel: [    0.851086] pci 0000:00:1c.0: PCI bridge to [bus 02]

Dec  8 14:34:31 sun kernel: [    0.851104] pci 0000:00:1c.1: PCI bridge to [bus 03]

Dec  8 14:34:31 sun kernel: [    0.851110] pci 0000:00:1c.1:   bridge window [mem 0xe1600000-0xe16fffff]

Dec  8 14:34:31 sun kernel: [    0.851121] pci 0000:00:1c.2: PCI bridge to [bus 04-08]

Dec  8 14:34:31 sun kernel: [    0.851125] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]

Dec  8 14:34:31 sun kernel: [    0.851131] pci 0000:00:1c.2:   bridge window [mem 0xe0e00000-0xe15fffff]

Dec  8 14:34:31 sun kernel: [    0.851136] pci 0000:00:1c.2:   bridge window [mem 0xe0400000-0xe0bfffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.851144] pci 0000:00:1c.3: PCI bridge to [bus 09]

Dec  8 14:34:31 sun kernel: [    0.851147] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]

Dec  8 14:34:31 sun kernel: [    0.851153] pci 0000:00:1c.3:   bridge window [mem 0xe0d00000-0xe0dfffff]

Dec  8 14:34:31 sun kernel: [    0.851157] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe0cfffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.851166] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

Dec  8 14:34:31 sun kernel: [    0.851168] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

Dec  8 14:34:31 sun kernel: [    0.851170] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

Dec  8 14:34:31 sun kernel: [    0.851171] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]

Dec  8 14:34:31 sun kernel: [    0.851173] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]

Dec  8 14:34:31 sun kernel: [    0.851175] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff]

Dec  8 14:34:31 sun kernel: [    0.851176] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]

Dec  8 14:34:31 sun kernel: [    0.851178] pci_bus 0000:04: resource 1 [mem 0xe0e00000-0xe15fffff]

Dec  8 14:34:31 sun kernel: [    0.851180] pci_bus 0000:04: resource 2 [mem 0xe0400000-0xe0bfffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.851181] pci_bus 0000:09: resource 0 [io  0x3000-0x3fff]

Dec  8 14:34:31 sun kernel: [    0.851183] pci_bus 0000:09: resource 1 [mem 0xe0d00000-0xe0dfffff]

Dec  8 14:34:31 sun kernel: [    0.851184] pci_bus 0000:09: resource 2 [mem 0xe0c00000-0xe0cfffff 64bit pref]

Dec  8 14:34:31 sun kernel: [    0.851310] NET: Registered protocol family 2

Dec  8 14:34:31 sun kernel: [    0.851503] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)

Dec  8 14:34:31 sun kernel: [    0.851540] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

Dec  8 14:34:31 sun kernel: [    0.851713] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

Dec  8 14:34:31 sun kernel: [    0.851871] TCP: Hash tables configured (established 65536 bind 65536)

Dec  8 14:34:31 sun kernel: [    0.851922] UDP hash table entries: 4096 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.851952] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

Dec  8 14:34:31 sun kernel: [    0.852038] NET: Registered protocol family 1

Dec  8 14:34:31 sun kernel: [    0.852044] NET: Registered protocol family 44

Dec  8 14:34:31 sun kernel: [    0.852058] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

Dec  8 14:34:31 sun kernel: [    0.852784] PCI: CLS 64 bytes, default 64

Dec  8 14:34:31 sun kernel: [    0.852846] Unpacking initramfs...

Dec  8 14:34:31 sun kernel: [    1.335555] Freeing initrd memory: 20164K

Dec  8 14:34:31 sun kernel: [    1.364986] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

Dec  8 14:34:31 sun kernel: [    1.364989] software IO TLB: mapped [mem 0xac65f000-0xb065f000] (64MB)

Dec  8 14:34:31 sun kernel: [    1.365847] Initialise system trusted keyrings

Dec  8 14:34:31 sun kernel: [    1.365859] Key type blacklist registered

Dec  8 14:34:31 sun kernel: [    1.365920] workingset: timestamp_bits=40 max_order=21 bucket_order=0

Dec  8 14:34:31 sun kernel: [    1.367587] zbud: loaded

Dec  8 14:34:31 sun kernel: [    1.633908] Key type asymmetric registered

Dec  8 14:34:31 sun kernel: [    1.633910] Asymmetric key parser 'x509' registered

Dec  8 14:34:31 sun kernel: [    1.633923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

Dec  8 14:34:31 sun kernel: [    1.633969] io scheduler noop registered

Dec  8 14:34:31 sun kernel: [    1.633970] io scheduler deadline registered

Dec  8 14:34:31 sun kernel: [    1.634015] io scheduler cfq registered (default)

Dec  8 14:34:31 sun kernel: [    1.634016] io scheduler mq-deadline registered

Dec  8 14:34:31 sun kernel: [    1.634892] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

Dec  8 14:34:31 sun kernel: [    1.634911] intel_idle: MWAIT substates: 0x21120

Dec  8 14:34:31 sun kernel: [    1.634912] intel_idle: v0.4.1 model 0x3A

Dec  8 14:34:31 sun kernel: [    1.635121] intel_idle: lapic_timer_reliable_states 0xffffffff

Dec  8 14:34:31 sun kernel: [    1.635498] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

Dec  8 14:34:31 sun kernel: [    1.636087] Linux agpgart interface v0.103

Dec  8 14:34:31 sun kernel: [    1.636154] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>

Dec  8 14:34:31 sun kernel: [    1.636154] AMD IOMMUv2 functionality not available on this system

Dec  8 14:34:31 sun kernel: [    1.636534] i8042: PNP: PS/2 Controller [PNP0303:PSK2,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

Dec  8 14:34:31 sun kernel: [    1.638885] i8042: Detected active multiplexing controller, rev 1.1

Dec  8 14:34:31 sun kernel: [    1.641600] serio: i8042 KBD port at 0x60,0x64 irq 1

Dec  8 14:34:31 sun kernel: [    1.641605] serio: i8042 AUX0 port at 0x60,0x64 irq 12

Dec  8 14:34:31 sun kernel: [    1.641641] serio: i8042 AUX1 port at 0x60,0x64 irq 12

Dec  8 14:34:31 sun kernel: [    1.641668] serio: i8042 AUX2 port at 0x60,0x64 irq 12

Dec  8 14:34:31 sun kernel: [    1.641693] serio: i8042 AUX3 port at 0x60,0x64 irq 12

Dec  8 14:34:31 sun kernel: [    1.642026] mousedev: PS/2 mouse device common for all mice

Dec  8 14:34:31 sun kernel: [    1.642095] rtc_cmos 00:01: RTC can wake from S4

Dec  8 14:34:31 sun kernel: [    1.642373] rtc_cmos 00:01: registered as rtc0

Dec  8 14:34:31 sun kernel: [    1.642406] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

Dec  8 14:34:31 sun kernel: [    1.642424] intel_pstate: Intel P-state driver initializing

Dec  8 14:34:31 sun kernel: [    1.642884] ledtrig-cpu: registered to indicate activity on CPUs

Dec  8 14:34:31 sun kernel: [    1.643931] NET: Registered protocol family 10

Dec  8 14:34:31 sun kernel: [    1.662654] Segment Routing with IPv6

Dec  8 14:34:31 sun kernel: [    1.662702] mip6: Mobile IPv6

Dec  8 14:34:31 sun kernel: [    1.662706] NET: Registered protocol family 17

Dec  8 14:34:31 sun kernel: [    1.662879] mpls_gso: MPLS GSO support

Dec  8 14:34:31 sun kernel: [    1.663458] mce: Using 7 MCE banks

Dec  8 14:34:31 sun kernel: [    1.663579] microcode: sig=0x306a9, pf=0x10, revision=0x20

Dec  8 14:34:31 sun kernel: [    1.663799] microcode: Microcode Update Driver: v2.2.

Dec  8 14:34:31 sun kernel: [    1.663828] sched_clock: Marking stable (1661597550, 2182448)->(1671138147, -7358149)

Dec  8 14:34:31 sun kernel: [    1.664066] registered taskstats version 1

Dec  8 14:34:31 sun kernel: [    1.664067] Loading compiled-in X.509 certificates

Dec  8 14:34:31 sun kernel: [    1.684820] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

Dec  8 14:34:31 sun kernel: [    1.707910] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'

Dec  8 14:34:31 sun kernel: [    1.707925] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'

Dec  8 14:34:31 sun kernel: [    1.707942] zswap: loaded using pool lzo/zbud

Dec  8 14:34:31 sun kernel: [    1.708050] AppArmor: AppArmor sha1 policy hashing enabled

Dec  8 14:34:31 sun kernel: [    1.708400] rtc_cmos 00:01: setting system clock to 2020-12-08 13:33:25 UTC (1607434405)

Dec  8 14:34:31 sun kernel: [    1.709767] Freeing unused kernel image memory: 1584K

Dec  8 14:34:31 sun kernel: [    1.729077] Write protecting the kernel read-only data: 16384k

Dec  8 14:34:31 sun kernel: [    1.730310] Freeing unused kernel image memory: 2028K

Dec  8 14:34:31 sun kernel: [    1.730789] Freeing unused kernel image memory: 772K

Dec  8 14:34:31 sun kernel: [    1.742095] x86/mm: Checked W+X mappings: passed, no W+X pages found.

Dec  8 14:34:31 sun kernel: [    1.742097] x86/mm: Checking user space page tables

Dec  8 14:34:31 sun kernel: [    1.749718] x86/mm: Checked W+X mappings: passed, no W+X pages found.

Dec  8 14:34:31 sun kernel: [    1.749720] Run /init as init process

Dec  8 14:34:31 sun kernel: [    1.884035] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3

Dec  8 14:34:31 sun kernel: [    1.884056] ACPI: Lid Switch [LID]

Dec  8 14:34:31 sun kernel: [    1.884120] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4

Dec  8 14:34:31 sun kernel: [    1.884131] ACPI: Power Button [PWRB]

Dec  8 14:34:31 sun kernel: [    1.884188] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5

Dec  8 14:34:31 sun kernel: [    1.884200] ACPI: Sleep Button [SLPB]

Dec  8 14:34:31 sun kernel: [    1.884257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6

Dec  8 14:34:31 sun kernel: [    1.884269] ACPI: Power Button [PWRF]

Dec  8 14:34:31 sun kernel: [    1.893574] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)

Dec  8 14:34:31 sun kernel: [    1.924013] cryptd: max_cpu_qlen set to 1000

Dec  8 14:34:31 sun kernel: [    1.927602] SCSI subsystem initialized

Dec  8 14:34:31 sun kernel: [    1.938506] AVX version of gcm_enc/dec engaged.

Dec  8 14:34:31 sun kernel: [    1.938508] AES CTR mode by8 optimization enabled

Dec  8 14:34:31 sun kernel: [    1.952146] libata version 3.00 loaded.

Dec  8 14:34:31 sun kernel: [    1.959334] ahci 0000:00:1f.2: version 3.0

Dec  8 14:34:31 sun kernel: [    1.969655] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 impl SATA mode

Dec  8 14:34:31 sun kernel: [    1.969659] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 

Dec  8 14:34:31 sun kernel: [    1.978738] thermal LNXTHERM:00: registered as thermal_zone0

Dec  8 14:34:31 sun kernel: [    1.978741] ACPI: Thermal Zone [TZ00] (53 C)

Dec  8 14:34:31 sun kernel: [    1.981532] scsi host0: ahci

Dec  8 14:34:31 sun kernel: [    1.981835] scsi host1: ahci

Dec  8 14:34:31 sun kernel: [    1.981972] scsi host2: ahci

Dec  8 14:34:31 sun kernel: [    1.982104] scsi host3: ahci

Dec  8 14:34:31 sun kernel: [    1.982179] ata1: SATA max UDMA/133 abar m2048@0xe1718000 port 0xe1718100 irq 26

Dec  8 14:34:31 sun kernel: [    1.982181] ata2: DUMMY

Dec  8 14:34:31 sun kernel: [    1.982184] ata3: SATA max UDMA/133 abar m2048@0xe1718000 port 0xe1718200 irq 26

Dec  8 14:34:31 sun kernel: [    1.982185] ata4: DUMMY

Dec  8 14:34:31 sun kernel: [    2.048795] [drm] Replacing VGA console driver

Dec  8 14:34:31 sun kernel: [    2.049764] Console: switching to colour dummy device 80x25

Dec  8 14:34:31 sun kernel: [    2.050875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

Dec  8 14:34:31 sun kernel: [    2.050888] [drm] Driver supports precise vblank timestamp query.

Dec  8 14:34:31 sun kernel: [    2.082252] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

Dec  8 14:34:31 sun kernel: [    2.267732] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0

Dec  8 14:34:31 sun kernel: [    2.268385] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

Dec  8 14:34:31 sun kernel: [    2.268611] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13

Dec  8 14:34:31 sun kernel: [    2.299249] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

Dec  8 14:34:31 sun kernel: [    2.299308] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Dec  8 14:34:31 sun kernel: [    2.299950] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded

Dec  8 14:34:31 sun kernel: [    2.299954] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

Dec  8 14:34:31 sun kernel: [    2.299956] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

Dec  8 14:34:31 sun kernel: [    2.300962] ata3.00: ATA-8: SanDisk SD6SF1M256GG56, X231200, max UDMA/133

Dec  8 14:34:31 sun kernel: [    2.300966] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA

Dec  8 14:34:31 sun kernel: [    2.301943] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded

Dec  8 14:34:31 sun kernel: [    2.301947] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

Dec  8 14:34:31 sun kernel: [    2.301949] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

Dec  8 14:34:31 sun kernel: [    2.302252] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded

Dec  8 14:34:31 sun kernel: [    2.302255] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

Dec  8 14:34:31 sun kernel: [    2.302257] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

Dec  8 14:34:31 sun kernel: [    2.302434] ata1.00: supports DRM functions and may not be fully accessible

Dec  8 14:34:31 sun kernel: [    2.303238] ata3.00: configured for UDMA/133

Dec  8 14:34:31 sun kernel: [    2.307206] ata1.00: disabling queued TRIM support

Dec  8 14:34:31 sun kernel: [    2.307208] ata1.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133

Dec  8 14:34:31 sun kernel: [    2.307211] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA

Dec  8 14:34:31 sun kernel: [    2.313519] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded

Dec  8 14:34:31 sun kernel: [    2.313523] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out

Dec  8 14:34:31 sun kernel: [    2.313526] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

Dec  8 14:34:31 sun kernel: [    2.313734] ata1.00: supports DRM functions and may not be fully accessible

Dec  8 14:34:31 sun kernel: [    2.318615] ata1.00: disabling queued TRIM support

Dec  8 14:34:31 sun kernel: [    2.323688] ata1.00: configured for UDMA/133

Dec  8 14:34:31 sun kernel: [    2.334102] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5

Dec  8 14:34:31 sun kernel: [    2.334713] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SD6SF1M2 200  PQ: 0 ANSI: 5

Dec  8 14:34:31 sun kernel: [    2.389007] tsc: Refined TSC clocksource calibration: 1696.147 MHz

Dec  8 14:34:31 sun kernel: [    2.389034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872ef8535c, max_idle_ns: 440795255355 ns

Dec  8 14:34:31 sun kernel: [    2.389048] clocksource: Switched to clocksource tsc

Dec  8 14:34:31 sun kernel: [    2.465631] fbcon: inteldrmfb (fb0) is primary device

Dec  8 14:34:31 sun kernel: [    2.618176] psmouse serio4: synaptics: queried max coordinates: x [..5702], y [..4714]

Dec  8 14:34:31 sun kernel: [    2.653703] psmouse serio4: synaptics: queried min coordinates: x [1240..], y [1140..]

Dec  8 14:34:31 sun kernel: [    2.653720] psmouse serio4: synaptics: Your touchpad (PNP: LEN0051 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.

Dec  8 14:34:31 sun kernel: [    2.723841] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00/0x0, board id: 2228, fw id: 1212753

Dec  8 14:34:31 sun kernel: [    2.723859] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0

Dec  8 14:34:31 sun kernel: [    2.765999] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12

Dec  8 14:34:31 sun kernel: [    3.350666] Console: switching to colour frame buffer device 170x48

Dec  8 14:34:31 sun kernel: [    3.375309] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

Dec  8 14:34:31 sun kernel: [    3.400899] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)

Dec  8 14:34:31 sun kernel: [    3.400904] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)

Dec  8 14:34:31 sun kernel: [    3.400910] sd 0:0:0:0: [sda] Write Protect is off

Dec  8 14:34:31 sun kernel: [    3.400912] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

Dec  8 14:34:31 sun kernel: [    3.400913] sd 2:0:0:0: [sdb] Write Protect is off

Dec  8 14:34:31 sun kernel: [    3.400915] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00

Dec  8 14:34:31 sun kernel: [    3.400927] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Dec  8 14:34:31 sun kernel: [    3.400929] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Dec  8 14:34:31 sun kernel: [    3.405035] sd 0:0:0:0: [sda] supports TCG Opal

Dec  8 14:34:31 sun kernel: [    3.405037] sd 0:0:0:0: [sda] Attached SCSI disk

Dec  8 14:34:31 sun kernel: [    3.407450]  sdb: sdb1 sdb2 < sdb5 >

Dec  8 14:34:31 sun kernel: [    3.407755] sd 2:0:0:0: [sdb] Attached SCSI disk

Dec  8 14:34:31 sun kernel: [    3.475163] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3

Dec  8 14:34:31 sun kernel: [    3.715126] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input14

Dec  8 14:34:31 sun kernel: [    3.778598] device-mapper: uevent: version 1.0.3

Dec  8 14:34:31 sun kernel: [    3.778705] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com

Dec  8 14:34:31 sun kernel: [   65.610216] NET: Registered protocol family 38

Dec  8 14:34:31 sun kernel: [   65.968065] PM: Image not found (code -22)

Dec  8 14:34:31 sun kernel: [   66.135152] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)

Dec  8 14:34:31 sun kernel: [   66.793745] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro

Dec  8 14:34:31 sun kernel: [   66.816008] lp: driver loaded but no devices found

Dec  8 14:34:31 sun kernel: [   66.823245] ppdev: user-space parallel port driver

Dec  8 14:34:31 sun kernel: [   67.061653] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)

Dec  8 14:34:31 sun kernel: [   67.061662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Dec  8 14:34:31 sun kernel: [   67.061665] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)

Dec  8 14:34:31 sun kernel: [   67.061671] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Dec  8 14:34:31 sun kernel: [   67.061672] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)

Dec  8 14:34:31 sun kernel: [   67.061677] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Dec  8 14:34:31 sun kernel: [   67.061678] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)

Dec  8 14:34:31 sun kernel: [   67.061682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Dec  8 14:34:31 sun kernel: [   67.061683] lpc_ich: Resource conflict(s) found affecting gpio_ich

Dec  8 14:34:31 sun kernel: [   67.068690] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

Dec  8 14:34:31 sun kernel: [   67.080327] Non-volatile memory driver v1.3

Dec  8 14:34:31 sun kernel: [   67.109792] ACPI: AC Adapter [ACAD] (on-line)

Dec  8 14:34:31 sun kernel: [   67.120570] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)

Dec  8 14:34:31 sun kernel: [   67.131051] ACPI: bus type USB registered

Dec  8 14:34:31 sun kernel: [   67.131084] usbcore: registered new interface driver usbfs

Dec  8 14:34:31 sun kernel: [   67.131096] usbcore: registered new interface driver hub

Dec  8 14:34:31 sun kernel: [   67.131132] usbcore: registered new device driver usb

Dec  8 14:34:31 sun kernel: [   67.155201] battery: ACPI: Battery Slot [BAT1] (battery present)

Dec  8 14:34:31 sun kernel: [   67.158865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Dec  8 14:34:31 sun kernel: [   67.159391] thinkpad_acpi: ThinkPad ACPI Extras v0.26

Dec  8 14:34:31 sun kernel: [   67.159393] thinkpad_acpi: http://ibm-acpi.sf.net/

Dec  8 14:34:31 sun kernel: [   67.159394] thinkpad_acpi: ThinkPad BIOS H6ETA0WW (2.18 ), EC unknown

Dec  8 14:34:31 sun kernel: [   67.159395] thinkpad_acpi: Lenovo ThinkPad T430u, model 335337G

Dec  8 14:34:31 sun kernel: [   67.160785] ehci-pci: EHCI PCI platform driver

Dec  8 14:34:31 sun kernel: [   67.160964] ehci-pci 0000:00:1a.0: EHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.160972] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

Dec  8 14:34:31 sun kernel: [   67.160987] ehci-pci 0000:00:1a.0: debug port 2

Dec  8 14:34:31 sun kernel: [   67.164894] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported

Dec  8 14:34:31 sun kernel: [   67.164918] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe171a000

Dec  8 14:34:31 sun kernel: [   67.164978] sd 0:0:0:0: Attached scsi generic sg0 type 0

Dec  8 14:34:31 sun kernel: [   67.166474] sd 2:0:0:0: Attached scsi generic sg1 type 0

Dec  8 14:34:31 sun kernel: [   67.174015] tpm tpm0: TPM is disabled/deactivated (0x6)

Dec  8 14:34:31 sun kernel: [   67.174896] thinkpad_acpi: radio switch found; radios are enabled

Dec  8 14:34:31 sun kernel: [   67.174909] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode

Dec  8 14:34:31 sun kernel: [   67.174927] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver

Dec  8 14:34:31 sun kernel: [   67.174928] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...

Dec  8 14:34:31 sun kernel: [   67.179704] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

Dec  8 14:34:31 sun kernel: [   67.179789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

Dec  8 14:34:31 sun kernel: [   67.179791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Dec  8 14:34:31 sun kernel: [   67.179793] usb usb1: Product: EHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.179794] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd

Dec  8 14:34:31 sun kernel: [   67.179795] usb usb1: SerialNumber: 0000:00:1a.0

Dec  8 14:34:31 sun kernel: [   67.179984] hub 1-0:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.179994] hub 1-0:1.0: 3 ports detected

Dec  8 14:34:31 sun kernel: [   67.180345] ehci-pci 0000:00:1d.0: EHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.180352] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

Dec  8 14:34:31 sun kernel: [   67.180366] ehci-pci 0000:00:1d.0: debug port 2

Dec  8 14:34:31 sun kernel: [   67.184276] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported

Dec  8 14:34:31 sun kernel: [   67.184447] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe1719000

Dec  8 14:34:31 sun kernel: [   67.186167] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked

Dec  8 14:34:31 sun kernel: [   67.188881] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one

Dec  8 14:34:31 sun kernel: [   67.189190] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)

Dec  8 14:34:31 sun kernel: [   67.196979] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

Dec  8 14:34:31 sun kernel: [   67.197058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

Dec  8 14:34:31 sun kernel: [   67.197060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Dec  8 14:34:31 sun kernel: [   67.197062] usb usb2: Product: EHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.197063] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd

Dec  8 14:34:31 sun kernel: [   67.197065] usb usb2: SerialNumber: 0000:00:1d.0

Dec  8 14:34:31 sun kernel: [   67.197231] hub 2-0:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.197242] hub 2-0:1.0: 3 ports detected

Dec  8 14:34:31 sun kernel: [   67.202840] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error

Dec  8 14:34:31 sun kernel: [   67.202843] thinkpad_acpi: Error probing battery 2

Dec  8 14:34:31 sun kernel: [   67.202928] battery: extension failed to load: ThinkPad Battery Extension

Dec  8 14:34:31 sun kernel: [   67.202931] battery: extension unregistered: ThinkPad Battery Extension

Dec  8 14:34:31 sun kernel: [   67.203042] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15

Dec  8 14:34:31 sun kernel: [   67.236187] input: PC Speaker as /devices/platform/pcspkr/input/input16

Dec  8 14:34:31 sun kernel: [   67.239785] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer

Dec  8 14:34:31 sun kernel: [   67.239787] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

Dec  8 14:34:31 sun kernel: [   67.239788] RAPL PMU: hw unit of domain package 2^-16 Joules

Dec  8 14:34:31 sun kernel: [   67.239789] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules

Dec  8 14:34:31 sun kernel: [   67.280314] xhci_hcd 0000:00:14.0: xHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.280320] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

Dec  8 14:34:31 sun kernel: [   67.280855] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control

Dec  8 14:34:31 sun kernel: [   67.281393] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930

Dec  8 14:34:31 sun kernel: [   67.281399] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

Dec  8 14:34:31 sun kernel: [   67.284571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

Dec  8 14:34:31 sun kernel: [   67.284575] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Dec  8 14:34:31 sun kernel: [   67.284576] usb usb3: Product: xHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.284578] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd

Dec  8 14:34:31 sun kernel: [   67.284579] usb usb3: SerialNumber: 0000:00:14.0

Dec  8 14:34:31 sun kernel: [   67.284774] hub 3-0:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.284812] hub 3-0:1.0: 4 ports detected

Dec  8 14:34:31 sun kernel: [   67.285864] xhci_hcd 0000:00:14.0: xHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.285870] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

Dec  8 14:34:31 sun kernel: [   67.285875] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed

Dec  8 14:34:31 sun kernel: [   67.285948] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

Dec  8 14:34:31 sun kernel: [   67.285950] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Dec  8 14:34:31 sun kernel: [   67.285952] usb usb4: Product: xHCI Host Controller

Dec  8 14:34:31 sun kernel: [   67.285953] usb usb4: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd

Dec  8 14:34:31 sun kernel: [   67.285955] usb usb4: SerialNumber: 0000:00:14.0

Dec  8 14:34:31 sun kernel: [   67.286130] hub 4-0:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.286144] hub 4-0:1.0: 4 ports detected

Dec  8 14:34:31 sun kernel: [   67.310510] libphy: r8169: probed

Dec  8 14:34:31 sun kernel: [   67.311026] r8169 0000:09:00.0 eth0: RTL8168evl/8111evl, 08:9e:01:2e:3b:e5, XID 2c900800, IRQ 30

Dec  8 14:34:31 sun kernel: [   67.311030] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

Dec  8 14:34:31 sun kernel: [   67.330253] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

Dec  8 14:34:31 sun kernel: [   67.340271] Intel(R) Wireless WiFi driver for Linux

Dec  8 14:34:31 sun kernel: [   67.340272] Copyright(c) 2003- 2015 Intel Corporation

Dec  8 14:34:31 sun kernel: [   67.340486] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control

Dec  8 14:34:31 sun kernel: [   67.343122] iTCO_vendor_support: vendor-support=0

Dec  8 14:34:31 sun kernel: [   67.369875] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

Dec  8 14:34:31 sun kernel: [   67.369938] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)

Dec  8 14:34:31 sun kernel: [   67.371734] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

Dec  8 14:34:31 sun kernel: [   67.378221] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-2030-6.ucode

Dec  8 14:34:31 sun kernel: [   67.378443] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm

Dec  8 14:34:31 sun kernel: [   67.418183] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

Dec  8 14:34:31 sun kernel: [   67.418186] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

Dec  8 14:34:31 sun kernel: [   67.418188] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)

Dec  8 14:34:31 sun kernel: [   67.418190] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

Dec  8 14:34:31 sun kernel: [   67.418191] snd_hda_codec_realtek hdaudioC0D0:    inputs:

Dec  8 14:34:31 sun kernel: [   67.418193] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18

Dec  8 14:34:31 sun kernel: [   67.418195] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12

Dec  8 14:34:31 sun kernel: [   67.437595] r8169 0000:09:00.0 enp9s0: renamed from eth0

Dec  8 14:34:31 sun kernel: [   67.512977] usb 1-1: new high-speed USB device number 2 using ehci-pci

Dec  8 14:34:31 sun kernel: [   67.552970] usb 2-1: new high-speed USB device number 2 using ehci-pci

Dec  8 14:34:31 sun kernel: [   67.566967] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17

Dec  8 14:34:31 sun kernel: [   67.567792] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18

Dec  8 14:34:31 sun kernel: [   67.567865] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19

Dec  8 14:34:31 sun kernel: [   67.567934] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20

Dec  8 14:34:31 sun kernel: [   67.568002] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21

Dec  8 14:34:31 sun kernel: [   67.582685] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled

Dec  8 14:34:31 sun kernel: [   67.582687] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled

Dec  8 14:34:31 sun kernel: [   67.582689] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled

Dec  8 14:34:31 sun kernel: [   67.582690] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8

Dec  8 14:34:31 sun kernel: [   67.587740] psmouse serio5: Failed to deactivate mouse on synaptics-pt/serio0: -5

Dec  8 14:34:31 sun kernel: [   67.624977] usb 3-2: new full-speed USB device number 2 using xhci_hcd

Dec  8 14:34:31 sun kernel: [   67.647598] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'

Dec  8 14:34:31 sun kernel: [   67.651512] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0

Dec  8 14:34:31 sun kernel: [   67.676554] intel_rapl: Found RAPL domain package

Dec  8 14:34:31 sun kernel: [   67.676556] intel_rapl: Found RAPL domain core

Dec  8 14:34:31 sun kernel: [   67.676557] intel_rapl: Found RAPL domain uncore

Dec  8 14:34:31 sun kernel: [   67.676563] intel_rapl: RAPL package 0 domain package locked by BIOS

Dec  8 14:34:31 sun kernel: [   67.678031] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

Dec  8 14:34:31 sun kernel: [   67.678034] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

Dec  8 14:34:31 sun kernel: [   67.680641] hub 1-1:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.680716] hub 1-1:1.0: 4 ports detected

Dec  8 14:34:31 sun kernel: [   67.702767] Adding 7999484k swap on /dev/mapper/sun-swap.  Priority:-2 extents:1 across:7999484k SSFS

Dec  8 14:34:31 sun kernel: [   67.709588] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

Dec  8 14:34:31 sun kernel: [   67.709591] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

Dec  8 14:34:31 sun kernel: [   67.710085] hub 2-1:1.0: USB hub found

Dec  8 14:34:31 sun kernel: [   67.710793] hub 2-1:1.0: 6 ports detected

Dec  8 14:34:31 sun kernel: [   67.775588] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10

Dec  8 14:34:31 sun kernel: [   67.775592] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

Dec  8 14:34:31 sun kernel: [   67.775594] usb 3-2: Product: USB Receiver

Dec  8 14:34:31 sun kernel: [   67.775595] usb 3-2: Manufacturer: Logitech

Dec  8 14:34:31 sun kernel: [   67.778210] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)

Dec  8 14:34:31 sun kernel: [   67.787081] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

Dec  8 14:34:31 sun kernel: [   67.846657] audit: type=1400 audit(1607434471.632:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=669 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.846662] audit: type=1400 audit(1607434471.632:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=669 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.848820] audit: type=1400 audit(1607434471.632:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=671 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.850174] audit: type=1400 audit(1607434471.636:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=670 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.850179] audit: type=1400 audit(1607434471.636:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.850181] audit: type=1400 audit(1607434471.636:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=670 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.851420] audit: type=1400 audit(1607434471.636:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=674 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.855258] audit: type=1400 audit(1607434471.640:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=678 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.857291] audit: type=1400 audit(1607434471.644:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=677 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.857680] audit: type=1400 audit(1607434471.644:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=676 comm="apparmor_parser"

Dec  8 14:34:31 sun kernel: [   67.904978] usb 3-4: new high-speed USB device number 3 using xhci_hcd

Dec  8 14:34:31 sun udisksd[722]: udisks daemon version 2.8.1 starting

Dec  8 14:34:31 sun smartd[723]: smartd 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-6-amd64] (local build)

Dec  8 14:34:31 sun smartd[723]: Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Dec  8 14:34:31 sun smartd[723]: Opened configuration file /etc/smartd.conf

Dec  8 14:34:31 sun smartd[723]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf

Dec  8 14:34:31 sun smartd[723]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda, type changed from 'scsi' to 'sat'

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda [SAT], opened

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda [SAT], Samsung SSD 850 PRO 512GB, S/N:S250NXAG911749J, WWN:5-002538-84009b8cd, FW:EXM02B6Q, 512 GB

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda [SAT], found in smartd database: Samsung based SSDs

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda [SAT], can't monitor Current_Pending_Sector count - no Attribute 197

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda [SAT], can't monitor Offline_Uncorrectable count - no Attribute 198

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.Samsung_SSD_850_PRO_512GB-S250NXAG911749J.ata.state

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb, type changed from 'scsi' to 'sat'

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], opened

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], SanDisk SD6SF1M256GG56, S/N:133959400468, WWN:5-001b44-a3c2f3814, FW:X231200, 256 GB

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], not found in smartd database.

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], can't monitor Current_Pending_Sector count - no Attribute 197

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], can't monitor Offline_Uncorrectable count - no Attribute 198

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.SanDisk_SD6SF1M256GG56-133959400468.ata.state

Dec  8 14:34:31 sun smartd[723]: Monitoring 2 ATA/SATA, 0 SCSI/SAS and 0 NVMe devices

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 61 to 60

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.Samsung_SSD_850_PRO_512GB-S250NXAG911749J.ata.state

Dec  8 14:34:31 sun smartd[723]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.SanDisk_SD6SF1M256GG56-133959400468.ata.state

Dec  8 14:34:31 sun systemd[1]: Started Run anacron jobs.

Dec  8 14:34:31 sun systemd[1]: Starting LSB: Jitsi conference Focus...

Dec  8 14:34:31 sun systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.

Dec  8 14:34:31 sun anacron[731]: Anacron 2.3 started on 2020-12-08

Dec  8 14:34:31 sun systemd[1]: Starting Login Service...

Dec  8 14:34:31 sun systemd[1]: Starting Modem Manager...

Dec  8 14:34:31 sun systemd[1]: Started Regular background program processing daemon.

Dec  8 14:34:31 sun anacron[731]: Normal exit (0 jobs run)

Dec  8 14:34:31 sun systemd[1]: Starting Restore /etc/resolv.conf if the system crashed before the ppp link was shut down...

Dec  8 14:34:31 sun systemd[1]: Started D-Bus System Message Bus.

Dec  8 14:34:31 sun cron[736]: (CRON) INFO (pidfile fd = 3)

Dec  8 14:34:31 sun systemd[1]: Starting WPA supplicant...

Dec  8 14:34:31 sun systemd[1]: Starting Network Manager...

Dec  8 14:34:31 sun kernel: [   68.171525] usb 3-4: New USB device found, idVendor=5986, idProduct=0523, bcdDevice=14.02

Dec  8 14:34:31 sun kernel: [   68.171529] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2

Dec  8 14:34:31 sun kernel: [   68.171530] usb 3-4: Product: Integrated Camera

Dec  8 14:34:31 sun kernel: [   68.171532] usb 3-4: Manufacturer: Generic

Dec  8 14:34:31 sun kernel: [   68.171534] usb 3-4: SerialNumber: 200901010001

Dec  8 14:34:31 sun cron[736]: (CRON) INFO (Running @reboot jobs)

Dec  8 14:34:31 sun systemd[1]: Starting Accounts Service...

Dec  8 14:34:31 sun systemd[1]: Starting Avahi mDNS/DNS-SD Stack...

Dec  8 14:34:31 sun systemd[1]: Starting VirtualBox Linux kernel module...

Dec  8 14:34:31 sun systemd[1]: Starting Anonymizing overlay network for TCP (multi-instance-master)...

Dec  8 14:34:31 sun systemd[1]: Started CUPS Scheduler.

Dec  8 14:34:31 sun systemd[1]: Started System Logging Service.

Dec  8 14:34:31 sun systemd[1]: switcheroo-control.service: Succeeded.

Dec  8 14:34:31 sun mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4"

Dec  8 14:34:31 sun mtp-probe: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2"

Dec  8 14:34:31 sun mtp-probe: bus: 3, device: 3 was not an MTP device

Dec  8 14:34:31 sun mtp-probe: bus: 3, device: 2 was not an MTP device

Dec  8 14:34:32 sun systemd[1]: Started Switcheroo Control Proxy service.

Dec  8 14:34:32 sun systemd[1]: Started Save/Restore Sound Card State.

Dec  8 14:34:32 sun systemd[1]: anacron.service: Succeeded.

Dec  8 14:34:32 sun systemd[1]: pppd-dns.service: Succeeded.

Dec  8 14:34:32 sun systemd[1]: Started Restore /etc/resolv.conf if the system crashed before the ppp link was shut down.

Dec  8 14:34:32 sun ModemManager[734]: <info>  ModemManager (version 1.10.0) starting in system bus...

Dec  8 14:34:32 sun systemd[1]: Started Anonymizing overlay network for TCP (multi-instance-master).

Dec  8 14:34:32 sun sensors[772]: coretemp-isa-0000

Dec  8 14:34:32 sun sensors[772]: Adapter: ISA adapter

Dec  8 14:34:32 sun sensors[772]: Package id 0:  +58.0°C  (high = +87.0°C, crit = +105.0°C)

Dec  8 14:34:32 sun sensors[772]: Core 0:        +53.0°C  (high = +87.0°C, crit = +105.0°C)

Dec  8 14:34:32 sun sensors[772]: Core 1:        +58.0°C  (high = +87.0°C, crit = +105.0°C)

Dec  8 14:34:32 sun sensors[772]: acpitz-acpi-0

Dec  8 14:34:32 sun sensors[772]: Adapter: ACPI interface

Dec  8 14:34:32 sun sensors[772]: temp1:        +58.0°C  (crit = +130.0°C)

Dec  8 14:34:32 sun sensors[772]: thinkpad-isa-0000

Dec  8 14:34:32 sun sensors[772]: Adapter: ISA adapter

Dec  8 14:34:32 sun sensors[772]: fan1:        3166 RPM

Dec  8 14:34:32 sun sensors[772]: temp1:        +58.0°C

Dec  8 14:34:32 sun sensors[772]: temp2:         +0.0°C

Dec  8 14:34:32 sun sensors[772]: temp3:        +58.0°C

Dec  8 14:34:32 sun sensors[772]: temp4:         +0.0°C

Dec  8 14:34:32 sun sensors[772]: temp5:         +0.0°C

Dec  8 14:34:32 sun sensors[772]: temp6:         +0.0°C

Dec  8 14:34:32 sun sensors[772]: temp7:        +29.0°C

Dec  8 14:34:32 sun sensors[772]: temp8:         +0.0°C

Dec  8 14:34:32 sun avahi-daemon[744]: Found user 'avahi' (UID 112) and group 'avahi' (GID 120).

Dec  8 14:34:32 sun wpa_supplicant[740]: Successfully initialized wpa_supplicant

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Activating systemd to hand-off: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.4' (uid=0 pid=734 comm="/usr/sbin/ModemManager --filter-policy=strict ")

Dec  8 14:34:32 sun kernel: [   68.317130] media: Linux media interface: v0.10

Dec  8 14:34:32 sun kernel: [   68.318162] hidraw: raw HID events driver (C) Jiri Kosina

Dec  8 14:34:32 sun kernel: [   68.329898] usbcore: registered new interface driver usbhid

Dec  8 14:34:32 sun kernel: [   68.329899] usbhid: USB HID core driver

Dec  8 14:34:32 sun mtp-probe: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2"

Dec  8 14:34:32 sun mtp-probe: bus: 3, device: 2 was not an MTP device

Dec  8 14:34:32 sun kernel: [   68.343921] videodev: Linux video capture interface: v2.00

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1366] NetworkManager (version 1.14.6) is starting... (for the first time)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1367] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1387] wifi-nl80211: (wlp3s0): using nl80211 for WiFi device control

Dec  8 14:34:32 sun udisksd[722]: failed to load module mdraid: libbd_mdraid.so.2: cannot open shared object file: No such file or directory

Dec  8 14:34:32 sun kernel: [   68.357283] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2

Dec  8 14:34:32 sun systemd[1]: Started Run anacron jobs.

Dec  8 14:34:32 sun systemd[1]: Reached target Sound Card.

Dec  8 14:34:32 sun systemd[1]: Started Initialize hardware monitoring sensors.

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Successfully activated service 'org.freedesktop.systemd1'

Dec  8 14:34:32 sun anacron[816]: Anacron 2.3 started on 2020-12-08

Dec  8 14:34:32 sun anacron[816]: Normal exit (0 jobs run)

Dec  8 14:34:32 sun avahi-daemon[744]: Successfully dropped root privileges.

Dec  8 14:34:32 sun avahi-daemon[744]: avahi-daemon 0.7 starting up.

Dec  8 14:34:32 sun avahi-daemon[744]: Successfully called chroot().

Dec  8 14:34:32 sun systemd[1]: anacron.service: Succeeded.

Dec  8 14:34:32 sun avahi-daemon[744]: Successfully dropped remaining capabilities.

Dec  8 14:34:32 sun systemd[1]: Started Network Manager.

Dec  8 14:34:32 sun systemd[1]: Started Avahi mDNS/DNS-SD Stack.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1729] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"

Dec  8 14:34:32 sun kernel: [   68.384330] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0523)

Dec  8 14:34:32 sun systemd[1]: Started Make remote CUPS printers available locally.

Dec  8 14:34:32 sun systemd[1]: Starting Network Manager Wait Online...

Dec  8 14:34:32 sun systemd[1]: Starting Authorization Manager...

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1790] manager[0x56499a0f6030]: monitoring kernel firmware directory '/lib/firmware'.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.1792] monitoring ifupdown state file '/run/network/ifstate'.

Dec  8 14:34:32 sun avahi-daemon[744]: No service file found in /etc/avahi/services.

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.6' (uid=0 pid=741 comm="/usr/sbin/NetworkManager --no-daemon ")

Dec  8 14:34:32 sun avahi-daemon[744]: Network interface enumeration completed.

Dec  8 14:34:32 sun avahi-daemon[744]: Server startup complete. Host name is sun.local. Local service cookie is 2649270902.

Dec  8 14:34:32 sun systemd[1]: Started WPA supplicant.

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service' requested by ':1.9' (uid=0 pid=748 comm="/usr/sbin/cupsd -l ")

Dec  8 14:34:32 sun udisksd[722]: Failed to load the 'mdraid' libblockdev plugin

Dec  8 14:34:32 sun kernel: [   68.395105] uvcvideo 3-4:1.0: Entity type for entity Extension 4 was not initialized!

Dec  8 14:34:32 sun kernel: [   68.395108] uvcvideo 3-4:1.0: Entity type for entity Processing 2 was not initialized!

Dec  8 14:34:32 sun kernel: [   68.395110] uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized!

Dec  8 14:34:32 sun kernel: [   68.395296] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input22

Dec  8 14:34:32 sun kernel: [   68.395543] usbcore: registered new interface driver uvcvideo

Dec  8 14:34:32 sun kernel: [   68.395544] USB Video Class driver (1.1.1)

Dec  8 14:34:32 sun jicofo[732]: Starting jicofo: jicofo started.

Dec  8 14:34:32 sun mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4"

Dec  8 14:34:32 sun systemd[1]: Started LSB: Jitsi conference Focus.

Dec  8 14:34:32 sun mtp-probe: bus: 3, device: 3 was not an MTP device

Dec  8 14:34:32 sun systemd[1]: Starting Manage, Install and Generate Color Profiles...

Dec  8 14:34:32 sun systemd[1]: Starting Hostname Service...

Dec  8 14:34:32 sun systemd[1]: Reached target Network.

Dec  8 14:34:32 sun systemd[1]: Started Erlang Port Mapper Daemon.

Dec  8 14:34:32 sun systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.

Dec  8 14:34:32 sun systemd[1]: Starting Anonymizing overlay network for TCP...

Dec  8 14:34:32 sun systemd[1]: Started Glances.

Dec  8 14:34:32 sun systemd[1]: Started Prosody XMPP Server.

Dec  8 14:34:32 sun systemd[1]: Starting High performance HTTP 1.1 webserver written in Erlang...

Dec  8 14:34:32 sun polkitd[822]: started daemon version 0.105 using authority implementation `local' version `0.105'

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'

Dec  8 14:34:32 sun accounts-daemon[743]: started daemon version 0.6.45

Dec  8 14:34:32 sun systemd[1]: Starting OpenVPN service...

Dec  8 14:34:32 sun systemd[1]: Starting coTURN STUN/TURN Server...

Dec  8 14:34:32 sun systemd[1]: Starting Permit User Sessions...

Dec  8 14:34:32 sun systemd[1]: Starting A high performance web server and a reverse proxy server...

Dec  8 14:34:32 sun kernel: [   68.480433] input: Logitech Unifying Device. Wireless PID:101b Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input23

Dec  8 14:34:32 sun kernel: [   68.480564] hid-generic 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-2:1

Dec  8 14:34:32 sun systemd[1]: Starting OpenBSD Secure Shell server...

Dec  8 14:34:32 sun systemd[1]: Starting VirtualBox Web Service...

Dec  8 14:34:32 sun systemd[1]: Started OpenVPN service.

Dec  8 14:34:32 sun vboxdrv.sh[745]: vboxdrv.sh: Starting VirtualBox services.

Dec  8 14:34:32 sun systemd[1]: Started Permit User Sessions.

Dec  8 14:34:32 sun systemd[1]: Started Authorization Manager.

Dec  8 14:34:32 sun systemd[1]: Started Accounts Service.

Dec  8 14:34:32 sun systemd[1]: Started Login Service.

Dec  8 14:34:32 sun systemd[1]: Starting Light Display Manager...

Dec  8 14:34:32 sun vboxdrv.sh: Starting VirtualBox services.

Dec  8 14:34:32 sun systemd[1]: Starting Hold until boot process finishes up...

Dec  8 14:34:32 sun kernel: [   68.551604] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input27

Dec  8 14:34:32 sun kernel: [   68.551784] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-2:1

Dec  8 14:34:32 sun systemd[1]: vboxweb.service: Can't open PID file /run/vboxweb.pid (yet?) after start: No such file or directory

Dec  8 14:34:32 sun systemd[1]: vboxweb.service: Failed with result 'protocol'.

Dec  8 14:34:32 sun systemd[1]: Failed to start VirtualBox Web Service.

Dec  8 14:34:32 sun systemd[1]: Started Modem Manager.

Dec  8 14:34:32 sun kernel: [   68.591620] vboxdrv: loading out-of-tree module taints kernel.

Dec  8 14:34:32 sun kernel: [   68.591899] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel

Dec  8 14:34:32 sun systemd[1]: Started OpenBSD Secure Shell server.

Dec  8 14:34:32 sun kernel: [   68.630356] vboxdrv: Found 4 processor cores

Dec  8 14:34:32 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:32 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:32 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:32 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:32 sun turnserver: 0: TLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:32 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:32 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:32 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:32 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:32 sun tor[856]: Dec 08 14:34:32.432 [notice] Tor 0.3.5.12 running on Linux with Libevent 2.1.8-stable, OpenSSL 1.1.1d, Zlib 1.2.11, Liblzma 5.2.4, and Libzstd 1.3.8.

Dec  8 14:34:32 sun tor[856]: Dec 08 14:34:32.433 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:32 sun turnserver: 0: Redis supported

Dec  8 14:34:32 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:32 sun turnserver: 0: MySQL supported

Dec  8 14:34:32 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:32 sun turnserver: 0: Domain name: 

Dec  8 14:34:32 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:32 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:32 sun turnserver: 0: #012CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:32 sun tor[856]: Dec 08 14:34:32.437 [notice] Read configuration file "/usr/share/tor/tor-service-defaults-torrc".

Dec  8 14:34:32 sun tor[856]: Dec 08 14:34:32.439 [notice] Read configuration file "/etc/tor/torrc".

Dec  8 14:34:32 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:32 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:32 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:32 sun systemd[1]: Started Manage, Install and Generate Color Profiles.

Dec  8 14:34:32 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:32 sun systemd[1]: Received SIGRTMIN+21 from PID 207 (plymouthd).

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Successfully activated service 'org.freedesktop.ColorManager'

Dec  8 14:34:32 sun kernel: [   68.654834] vboxdrv: TSC mode is Invariant, tentative frequency 1696147696 Hz

Dec  8 14:34:32 sun kernel: [   68.654836] vboxdrv: Successfully loaded version 6.1.10_Debian (interface 0x002d0001)

Dec  8 14:34:32 sun turnserver[846]: Usage: turnserver [options]

Dec  8 14:34:32 sun turnserver[846]: Options:

Dec  8 14:34:32 sun turnserver[846]:  -d, --listening-device#011<device-name>#011#011Listener interface device (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:32 sun turnserver[846]:  -p, --listening-port#011#011<port>#011#011TURN listener port (Default: 3478).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Note: actually, TLS & DTLS sessions can connect to the "plain" TCP & UDP port(s), too,

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011if allowed by configuration.

Dec  8 14:34:32 sun turnserver[846]:  --tls-listening-port#011#011<port>#011#011TURN listener port for TLS & DTLS listeners

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(Default: 5349).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Note: actually, "plain" TCP & UDP sessions can connect to the TLS & DTLS port(s), too,

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011if allowed by configuration. The TURN server

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011"automatically" recognizes the type of traffic. Actually, two listening

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011endpoints (the "plain" one and the "tls" one) are equivalent in terms of

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011functionality; but we keep both endpoints to satisfy the RFC 5766 specs.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011For secure TCP connections, we currently support SSL version 3 and

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011TLS versions 1.0, 1.1 and 1.2. For secure UDP connections, we support

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011DTLS version 1.

Dec  8 14:34:32 sun turnserver[846]:  --alt-listening-port<port>#011<port>#011#011Alternative listening port for STUN CHANGE_REQUEST (in RFC 5780 sense,

Dec  8 14:34:32 sun turnserver[846]:                                                 or in old RFC 3489 sense, default is "listening port plus one").

Dec  8 14:34:32 sun turnserver[846]:  --alt-tls-listening-port#011<port>#011#011Alternative listening port for TLS and DTLS,

Dec  8 14:34:32 sun turnserver[846]:  #011#011#011#011#011#011the default is "TLS/DTLS port plus one".

Dec  8 14:34:32 sun turnserver[846]:  -L, --listening-ip#011#011<ip>#011#011Listener IP address of relay server. Multiple listeners can be specified.

Dec  8 14:34:32 sun turnserver[846]:  --aux-server#011#011#011<ip:port>#011Auxiliary STUN/TURN server listening endpoint.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Auxiliary servers do not have alternative ports and

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011they do not support RFC 5780 functionality (CHANGE REQUEST).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Valid formats are 1.2.3.4:5555 for IPv4 and [1:2::3:4]:5555 for IPv6.

Dec  8 14:34:32 sun turnserver[846]:  --udp-self-balance#011#011#011#011(recommended for older Linuxes only) Automatically balance UDP traffic

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011over auxiliary servers (if configured).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The load balancing is using the ALTERNATE-SERVER mechanism.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The TURN client must support 300 ALTERNATE-SERVER response for this functionality.

Dec  8 14:34:32 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:32 sun systemd[1]: Received SIGRTMIN+21 from PID 207 (plymouthd).

Dec  8 14:34:32 sun turnserver[846]:  -i, --relay-device#011#011<device-name>#011Relay interface device for relay sockets (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:32 sun turnserver[846]:  -E, --relay-ip#011#011<ip>#011#011#011Relay address (the local IP address that will be used to relay the

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011packets to the peer).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Multiple relay addresses may be used.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The same IP(s) can be used as both listening IP(s) and relay IP(s).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011If no relay IP(s) specified, then the turnserver will apply the default

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011policy: it will decide itself which relay addresses to be used, and it

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011will always be using the client socket IP address as the relay IP address

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011of the TURN session (if the requested relay address family is the same

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011as the family of the client socket).

Dec  8 14:34:32 sun turnserver[846]:  -X, --external-ip  <public-ip[/private-ip]>#011TURN Server public/private address mapping, if the server is behind NAT.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011In that situation, if a -X is used in form "-X ip" then that ip will be reported

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011as relay IP address of all allocations. This scenario works only in a simple case

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011when one single relay address is be used, and no STUN CHANGE_REQUEST

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011functionality is required.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011That single relay address must be mapped by NAT to the 'external' IP.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011For that 'external' IP, NAT must forward ports directly (relayed port 12345

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011must be always mapped to the same 'external' port 12345).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011In more complex case when more than one IP address is involved,

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011that option must be used several times in the command line, each entry must

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011have form "-X public-ip/private-ip", to map all involved addresses.

Dec  8 14:34:32 sun turnserver[846]:  --allow-loopback-peers#011#011#011#011Allow peers on the loopback addresses (127.x.x.x and ::1).

Dec  8 14:34:32 sun turnserver[846]:  --no-multicast-peers#011#011#011#011Disallow peers on well-known broadcast addresses (224.0.0.0 and above, and FFXX:*).

Dec  8 14:34:32 sun turnserver[846]:  -m, --relay-threads#011#011<number>#011Number of relay threads to handle the established connections

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(in addition to authentication thread and the listener thread).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011If explicitly set to 0 then application runs in single-threaded mode.

Dec  8 14:34:32 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:32 sun systemd[1]: plymouth-quit-wait.service: Succeeded.

Dec  8 14:34:32 sun tor[856]: Configuration was valid

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011If not set then a default OS-dependent optimal algorithm will be employed.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The default thread number is the number of CPUs.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011In older systems (pre-Linux 3.9) the number of UDP relay threads always equals

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011the number of listening endpoints (unless -m 0 is set).

Dec  8 14:34:32 sun turnserver[846]:  --min-port#011#011#011<port>#011#011Lower bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Default value is 49152, according to RFC 5766.

Dec  8 14:34:32 sun turnserver[846]:  --max-port#011#011#011<port>#011#011Upper bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Default value is 65535, according to RFC 5766.

Dec  8 14:34:32 sun turnserver[846]:  -v, --verbose#011#011#011#011#011'Moderate' verbose mode.

Dec  8 14:34:32 sun turnserver[846]:  -V, --Verbose#011#011#011#011#011Extra verbose mode, very annoying (for debug purposes only).

Dec  8 14:34:32 sun turnserver[846]:  -o, --daemon#011#011#011#011#011Start process as daemon (detach from current shell).

Dec  8 14:34:32 sun turnserver[846]:  --prod       #011 #011#011#011#011Production mode: hide the software version.

Dec  8 14:34:32 sun turnserver[846]:  -f, --fingerprint#011#011#011#011Use fingerprints in the TURN messages.

Dec  8 14:34:32 sun turnserver[846]:  -a, --lt-cred-mech#011#011#011#011Use the long-term credential mechanism.

Dec  8 14:34:32 sun turnserver[846]:  -z, --no-auth#011#011#011#011#011Do not use any credential mechanism, allow anonymous access.

Dec  8 14:34:32 sun turnserver[846]:  -u, --user#011#011#011<user:pwd>#011User account, in form 'username:password', for long-term credentials.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Cannot be used with TURN REST API.

Dec  8 14:34:32 sun turnserver[846]:  -r, --realm#011#011#011<realm>#011#011The default realm to be used for the users when no explicit

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011origin/realm relationship was found in the database.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Must be used with long-term credentials

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011mechanism or with TURN REST API.

Dec  8 14:34:32 sun turnserver[846]:  --check-origin-consistency#011#011#011The flag that sets the origin consistency check:

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011across the session, all requests must have the same

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011main ORIGIN attribute value (if the ORIGIN was

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011initially used by the session).

Dec  8 14:34:32 sun turnserver[846]:  -q, --user-quota#011#011<number>#011Per-user allocation quota: how many concurrent allocations a user can create.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun turnserver[846]:  -Q, --total-quota#011#011<number>#011Total allocations quota: global limit on concurrent allocations.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun turnserver: 0: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:32 sun systemd[1]: Started Hold until boot process finishes up.

Dec  8 14:34:32 sun turnserver[846]:  -s, --max-bps#011#011#011<number>#011Default max bytes-per-second bandwidth a TURN session is allowed to handle

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(input and output network streams are treated separately). Anything above

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011that limit will be dropped or temporary suppressed

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(within the available buffer limits).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun turnserver[846]:  -B, --bps-capacity#011#011<number>#011Maximum server capacity.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Total bytes-per-second bandwidth the TURN server is allowed to allocate

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011for the sessions, combined (input and output network streams are treated separately).

Dec  8 14:34:32 sun turnserver[846]:  -c#011#011#011#011<filename>#011Configuration file name (default - turnserver.conf).

Dec  8 14:34:32 sun turnserver[846]:  -b, , --db, --userdb#011<filename>#011#011SQLite database file name; default - /var/db/turndb or

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011    /usr/local/var/db/turndb or /var/lib/turn/turndb.

Dec  8 14:34:32 sun turnserver[846]:  -e, --psql-userdb, --sql-userdb <conn-string>#011PostgreSQL database connection string, if used (default - empty, no PostreSQL DB used).

Dec  8 14:34:32 sun turnserver[846]: #011#011                                This database can be used for long-term credentials mechanism users,

Dec  8 14:34:32 sun turnserver[846]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011See http://www.postgresql.org/docs/8.4/static/libpq-connect.html for 8.x PostgreSQL

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011versions format, see

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011for 9.x and newer connection string formats.

Dec  8 14:34:32 sun turnserver[846]:  -M, --mysql-userdb#011<connection-string>#011MySQL database connection string, if used (default - empty, no MySQL DB used).

Dec  8 14:34:32 sun turnserver[846]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:32 sun turnserver[846]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:32 sun turnserver[846]: #011        #011          #011#011"host=<ip-addr> dbname=<database-name> user=<database-user> \

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds> read_timeout=<seconds>".

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Successfully activated service 'org.freedesktop.hostname1'

Dec  8 14:34:32 sun systemd[1]: Started Light Display Manager.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The connection string parameters for the secure communications (SSL):

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011ca, capath, cert, key, cipher

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(see http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html for the

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011command options description).

Dec  8 14:34:32 sun turnserver[846]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:32 sun turnserver[846]:  --secret-key-file#011<filename>#011#011This is the file path which contain secret key of aes encryption while using MySQL password encryption.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011If you want to use in the MySQL connection string the password in encrypted format,

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011then set in this option the file path of the secret key. The key which is used to encrypt MySQL password.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Warning: If this option is set, then MySQL password must be set in "mysql-userdb" option in encrypted format!

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011If you want to use cleartext password then do not set this option!

Dec  8 14:34:32 sun turnserver[846]:  -N, --redis-userdb#011<connection-string>#011Redis user database connection string, if used (default - empty, no Redis DB used).

Dec  8 14:34:32 sun turnserver[846]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:32 sun turnserver[846]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:32 sun turnserver[846]: #011        #011          #011#011"host=<ip-addr> dbname=<db-number> \

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds>".

Dec  8 14:34:32 sun turnserver[846]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:32 sun turnserver[846]:  -O, --redis-statsdb#011<connection-string>#011Redis status and statistics database connection string, if used

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(default - empty, no Redis stats DB used).

Dec  8 14:34:32 sun turnserver[846]: #011                                #011This database keeps allocations status information, and it can be also used for publishing

Dec  8 14:34:32 sun turnserver[846]: #011#011                                and delivering traffic and allocation event notifications.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The connection string has the same parameters as redis-userdb connection string.

Dec  8 14:34:32 sun turnserver[846]:  --use-auth-secret#011#011#011#011TURN REST API flag.

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=741 comm="/usr/sbin/NetworkManager --no-daemon ")

Dec  8 14:34:32 sun systemd[1]: Started Getty on tty1.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Flag that sets a special authorization option that is based upon authentication secret

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(TURN Server REST API, see TURNServerRESTAPI.pdf). This option is used with timestamp.

Dec  8 14:34:32 sun turnserver[846]:  --static-auth-secret#011#011<secret>#011'Static' authentication secret value (a string) for TURN REST API only.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011If not set, then the turn server will try to use the 'dynamic' value

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011in turn_secret table in user database (if present).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011That database value can be changed on-the-fly

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011by a separate program, so this is why it is 'dynamic'.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Multiple shared secrets can be used (both in the database and in the "static" fashion).

Dec  8 14:34:32 sun turnserver[846]:  --server-name#011#011#011#011#011Server name used for

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011the oAuth authentication purposes.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The default value is the realm name.

Dec  8 14:34:32 sun turnserver[846]:  --oauth#011#011#011#011#011Support oAuth authentication.

Dec  8 14:34:32 sun turnserver[846]:  -n#011#011#011#011#011#011Do not use configuration file, take all parameters from the command line only.

Dec  8 14:34:32 sun turnserver[846]:  --cert#011#011#011<filename>#011#011Certificate file, PEM format. Same file search rules

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011If both --no-tls and --no_dtls options

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011are specified, then this parameter is not needed.

Dec  8 14:34:32 sun turnserver[846]:  --pkey#011#011#011<filename>#011#011Private key file, PEM format. Same file search rules

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011If both --no-tls and --no-dtls options

Dec  8 14:34:32 sun turnserver[846]:  --pkey-pwd#011#011<password>#011#011If the private key file is encrypted, then this password to be used.

Dec  8 14:34:32 sun turnserver[846]:  --cipher-list#011<"cipher-string">#011#011Allowed OpenSSL cipher list for TLS/DTLS connections.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Default value is "DEFAULT".

Dec  8 14:34:32 sun turnserver[846]:  --CA-file#011#011<filename>#011#011CA file in OpenSSL format.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Forces TURN server to verify the client SSL certificates.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011By default, no CA is set and no client certificate check is performed.

Dec  8 14:34:32 sun turnserver[846]:  --ec-curve-name#011<curve-name>#011#011Curve name for EC ciphers, if supported by OpenSSL

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011library (TLS and DTLS). The default value is prime256v1,

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011if pre-OpenSSL 1.0.2 is used. With OpenSSL 1.0.2+,

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011an optimal curve will be automatically calculated, if not defined

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011by this option.

Dec  8 14:34:32 sun systemd[1]: Reached target Login Prompts.

Dec  8 14:34:32 sun turnserver[846]:  --dh566#011#011#011#011#011Use 566 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:32 sun turnserver[846]:  --dh2066#011#011#011#011#011Use 2066 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:32 sun turnserver[846]:  --dh-file#011<dh-file-name>#011#011#011Use custom DH TLS key, stored in PEM format in the file.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Flags --dh566 and --dh2066 are ignored when the DH key is taken from a file.

Dec  8 14:34:32 sun turnserver[846]:  --no-tlsv1#011#011#011#011#011Do not allow TLSv1/DTLSv1 protocol.

Dec  8 14:34:32 sun turnserver[846]:  --no-tlsv1_1#011#011#011#011#011Do not allow TLSv1.1 protocol.

Dec  8 14:34:32 sun turnserver[846]:  --no-tlsv1_2#011#011#011#011#011Do not allow TLSv1.2/DTLSv1.2 protocol.

Dec  8 14:34:32 sun turnserver[846]:  --no-udp#011#011#011#011#011Do not start UDP client listeners.

Dec  8 14:34:32 sun turnserver[846]:  --no-tcp#011#011#011#011#011Do not start TCP client listeners.

Dec  8 14:34:32 sun turnserver[846]:  --no-tls#011#011#011#011#011Do not start TLS client listeners.

Dec  8 14:34:32 sun turnserver[846]:  --no-dtls#011#011#011#011#011Do not start DTLS client listeners.

Dec  8 14:34:32 sun turnserver[846]:  --no-udp-relay#011#011#011#011#011Do not allow UDP relay endpoints, use only TCP relay option.

Dec  8 14:34:32 sun turnserver[846]:  --no-tcp-relay#011#011#011#011#011Do not allow TCP relay endpoints, use only UDP relay options.

Dec  8 14:34:32 sun turnserver[846]:  -l, --log-file#011#011<filename>#011#011Option to set the full path name of the log file.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011By default, the turnserver tries to open a log file in

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011/var/log/turnserver/, /var/log, /var/tmp, /tmp and . (current) directories

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(which open operation succeeds first that file will be used).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011With this option you can set the definite log file name.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The special names are "stdout" and "-" - they will force everything

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011to the stdout; and "syslog" name will force all output to the syslog.

Dec  8 14:34:32 sun turnserver[846]:  --no-stdout-log#011#011#011#011Flag to prevent stdout log messages.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011By default, all log messages are going to both stdout and to

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011a log file. With this option everything will be going to the log file only

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(unless the log file itself is stdout).

Dec  8 14:34:32 sun turnserver[846]:  --syslog#011#011#011#011#011Output all log information into the system log (syslog), do not use the file output.

Dec  8 14:34:32 sun turnserver[846]:  --simple-log#011#011#011#011#011This flag means that no log file rollover will be used, and the log file

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011name will be constructed as-is, without PID and date appendage.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011This option can be used, for example, together with the logrotate tool.

Dec  8 14:34:32 sun systemd[1]: Started Hostname Service.

Dec  8 14:34:32 sun turnserver[846]:  --stale-nonce[=<value>]#011#011#011Use extra security with nonce value having limited lifetime (default 600 secs).

Dec  8 14:34:32 sun turnserver[846]:  --max-allocate-lifetime#011<value>#011#011Set the maximum value for the allocation lifetime. Default to 3600 secs.

Dec  8 14:34:32 sun turnserver[846]:  --channel-lifetime#011#011<value>#011#011Set the lifetime for channel binding, default to 600 secs.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011This value MUST not be changed for production purposes.

Dec  8 14:34:32 sun turnserver[846]:  --permission-lifetime#011#011<value>#011#011Set the value for the lifetime of the permission. Default to 300 secs.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011This MUST not be changed for production purposes.

Dec  8 14:34:32 sun turnserver[846]:  -S, --stun-only#011#011#011#011Option to set standalone STUN operation only, all TURN requests will be ignored.

Dec  8 14:34:32 sun turnserver[846]:      --no-stun#011#011#011#011#011Option to suppress STUN functionality, only TURN requests will be processed.

Dec  8 14:34:32 sun turnserver[846]:  --alternate-server#011#011<ip:port>#011Set the TURN server to redirect the allocate requests (UDP and TCP services).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:32 sun turnserver[846]:  --tls-alternate-server#011<ip:port>#011#011Set the TURN server to redirect the allocate requests (DTLS and TLS services).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:32 sun turnserver[846]:  -C, --rest-api-separator#011<SYMBOL>#011This is the timestamp/username separator symbol (character) in TURN REST API.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The default value is ':'.

Dec  8 14:34:32 sun turnserver[846]:  --max-allocate-timeout=<seconds>#011#011Max time, in seconds, allowed for full allocation establishment. Default is 60.

Dec  8 14:34:32 sun turnserver[846]:  --allowed-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are explicitly allowed to connect to the

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011turn server. Multiple allowed-peer-ip can be set.

Dec  8 14:34:32 sun turnserver[846]:  --denied-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are not allowed to connect to the turn server.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Multiple denied-peer-ip can be set.

Dec  8 14:34:32 sun turnserver[846]:  --pidfile <"pid-file-name">#011#011#011File name to store the pid of the process.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Default is /var/run/turnserver.pid (if superuser account is used) or

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011/var/tmp/turnserver.pid .

Dec  8 14:34:32 sun turnserver[846]:  --secure-stun#011#011#011#011#011Require authentication of the STUN Binding request.

Dec  8 14:34:32 sun dbus-daemon[739]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'

Dec  8 14:34:32 sun systemd[1]: coturn.service: Control process exited, code=exited, status=255/EXCEPTION

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011By default, the clients are allowed anonymous access to the STUN Binding functionality.

Dec  8 14:34:32 sun turnserver[846]:  --proc-user <user-name>#011#011#011User name to run the turnserver process.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011will make an attempt to change the current user ID to that user.

Dec  8 14:34:32 sun turnserver[846]:  --proc-group <group-name>#011#011#011Group name to run the turnserver process.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011will make an attempt to change the current group ID to that group.

Dec  8 14:34:32 sun turnserver[846]:  --mobility#011#011#011#011#011Mobility with ICE (MICE) specs support.

Dec  8 14:34:32 sun turnserver[846]:  -K, --keep-address-family#011#011#011TURN server allocates address family according TURN

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011Client <=> Server communication address family.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011!! It breaks RFC6156 section-4.2 (violates default IPv4) !!

Dec  8 14:34:32 sun turnserver[846]:  --no-cli#011#011#011#011#011Turn OFF the CLI support. By default it is always ON.

Dec  8 14:34:32 sun turnserver[846]:  --cli-ip=<IP>#011#011#011#011#011Local system IP address to be used for CLI server endpoint. Default value

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:32 sun turnserver[846]:  --cli-port=<port>#011#011#011#011CLI server port. Default is 5766.

Dec  8 14:34:32 sun turnserver[846]:  --cli-password=<password>#011#011#011CLI access password. Default is empty (no password).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011For the security reasons, it is recommended to use the encrypted

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011for of the password (see the -P command in the turnadmin utility).

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011The dollar signs in the encrypted form must be escaped.

Dec  8 14:34:32 sun turnserver[846]:  --web-admin#011#011#011#011#011Enable Turn Web-admin support. By default it is disabled.

Dec  8 14:34:32 sun turnserver[846]:  --web-admin-ip=<IP>#011#011#011#011Local system IP address to be used for Web-admin server endpoint. Default value

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:32 sun turnserver[846]:  --web-admin-port=<port>#011#011#011Web-admin server port. Default is 8080.

Dec  8 14:34:32 sun turnserver[846]:  --web-admin-listen-on-workers#011#011#011Enable for web-admin server to listens on STUN/TURN workers STUN/TURN ports.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011By default it is disabled for security resons!

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011(This behavior used to be the default behavior, and was enabled by default.)

Dec  8 14:34:32 sun turnserver[846]:  --server-relay#011#011#011#011#011Server relay. NON-STANDARD AND DANGEROUS OPTION. Only for those applications

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011when we want to run server applications on the relay endpoints.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011This option eliminates the IP permissions check on the packets

Dec  8 14:34:32 sun systemd[1]: coturn.service: Failed with result 'exit-code'.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011incoming to the relay endpoints.

Dec  8 14:34:32 sun turnserver[846]:  --cli-max-output-sessions#011#011#011Maximum number of output sessions in ps CLI command.

Dec  8 14:34:32 sun turnserver[846]: #011#011#011#011#011#011This value can be changed on-the-fly in CLI. The default value is 256.

Dec  8 14:34:32 sun turnserver[846]:  --ne=[1|2|3]#011#011#011#011#011Set network engine type for the process (for internal purposes).

Dec  8 14:34:32 sun turnserver[846]:  -h#011#011#011#011#011#011Help

Dec  8 14:34:32 sun turnserver[846]:  For more information, see the wiki pages:

Dec  8 14:34:32 sun turnserver[846]: #011https://github.com/coturn/coturn/wiki/

Dec  8 14:34:32 sun turnserver[846]: 0: log file opened: /var/tmp/turn_846_2020-12-08.log

Dec  8 14:34:32 sun turnserver[846]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 0.0.0.0-0.255.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 10.0.0.0-10.255.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 100.64.0.0-100.127.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 169.254.0.0-169.254.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 172.16.0.0-172.31.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 192.0.0.0-192.0.0.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 192.0.2.0-192.0.2.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 192.88.99.0-192.88.99.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 192.168.0.0-192.168.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 198.18.0.0-198.19.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 198.51.100.0-198.51.100.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 203.0.113.0-203.0.113.255

Dec  8 14:34:32 sun turnserver[846]: 0: Black listing: 240.0.0.0-255.255.255.255

Dec  8 14:34:32 sun turnserver[846]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun turnserver[846]: 0:

Dec  8 14:34:32 sun turnserver[846]: RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server

Dec  8 14:34:32 sun turnserver[846]: Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:32 sun turnserver[846]: 0:

Dec  8 14:34:32 sun turnserver[846]: Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:32 sun turnserver[846]: 0:

Dec  8 14:34:32 sun turnserver[846]: Due to the open files/sockets limitation,

Dec  8 14:34:32 sun turnserver[846]: max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:32 sun turnserver[846]: 0:

Dec  8 14:34:32 sun turnserver[846]: ==== Show him the instruments, Practical Frost: ====

Dec  8 14:34:32 sun turnserver[846]: 0: TLS supported

Dec  8 14:34:32 sun turnserver[846]: 0: DTLS supported

Dec  8 14:34:32 sun turnserver[846]: 0: DTLS 1.2 supported

Dec  8 14:34:32 sun turnserver[846]: 0: TURN/STUN ALPN supported

Dec  8 14:34:32 sun turnserver[846]: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:32 sun turnserver[846]: 0: GCM (AEAD) supported

Dec  8 14:34:32 sun turnserver[846]: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:32 sun turnserver[846]: 0:

Dec  8 14:34:32 sun turnserver[846]: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:32 sun turnserver[846]: 0: Redis supported

Dec  8 14:34:32 sun turnserver[846]: 0: PostgreSQL supported

Dec  8 14:34:32 sun turnserver[846]: 0: MySQL supported

Dec  8 14:34:32 sun turnserver[846]: 0: MongoDB is not supported

Dec  8 14:34:32 sun turnserver[846]: 0:

Dec  8 14:34:32 sun turnserver[846]: 0: Default Net Engine version: 3 (UDP thread per CPU core)

Dec  8 14:34:32 sun turnserver[846]: =====================================================

Dec  8 14:34:32 sun systemd[1]: Failed to start coTURN STUN/TURN Server.

Dec  8 14:34:32 sun turnserver[846]: 0: Domain name:

Dec  8 14:34:32 sun turnserver[846]: 0: Default realm: sun.0i0.fr

Dec  8 14:34:32 sun turnserver[846]: 0:

Dec  8 14:34:32 sun turnserver[846]: CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:32 sun turnserver[846]: 0: ERROR:

Dec  8 14:34:32 sun turnserver[846]: CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:32 sun turnserver[846]: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:32 sun turnserver[846]: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:32 sun turnserver[846]: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:32 sun turnserver[846]: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:32 sun turnserver[846]: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:32 sun turnserver[846]: 0: Listener address to use: ::1

Dec  8 14:34:32 sun turnserver[846]: 0: ERROR: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4897] hostname: hostname: using hostnamed

Dec  8 14:34:32 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4897] hostname: hostname changed from (none) to "sun"

Dec  8 14:34:32 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:32 sun turnserver[960]: Usage: turnserver [options]

Dec  8 14:34:32 sun turnserver[960]: Options:

Dec  8 14:34:32 sun turnserver[960]:  -d, --listening-device#011<device-name>#011#011Listener interface device (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:32 sun turnserver[960]:  -p, --listening-port#011#011<port>#011#011TURN listener port (Default: 3478).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Note: actually, TLS & DTLS sessions can connect to the "plain" TCP & UDP port(s), too,

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011if allowed by configuration.

Dec  8 14:34:32 sun turnserver[960]:  --tls-listening-port#011#011<port>#011#011TURN listener port for TLS & DTLS listeners

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(Default: 5349).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Note: actually, "plain" TCP & UDP sessions can connect to the TLS & DTLS port(s), too,

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011if allowed by configuration. The TURN server

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011"automatically" recognizes the type of traffic. Actually, two listening

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011endpoints (the "plain" one and the "tls" one) are equivalent in terms of

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011functionality; but we keep both endpoints to satisfy the RFC 5766 specs.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011For secure TCP connections, we currently support SSL version 3 and

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011TLS versions 1.0, 1.1 and 1.2. For secure UDP connections, we support

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011DTLS version 1.

Dec  8 14:34:32 sun turnserver[960]:  --alt-listening-port<port>#011<port>#011#011Alternative listening port for STUN CHANGE_REQUEST (in RFC 5780 sense,

Dec  8 14:34:32 sun turnserver[960]:                                                 or in old RFC 3489 sense, default is "listening port plus one").

Dec  8 14:34:32 sun turnserver[960]:  --alt-tls-listening-port#011<port>#011#011Alternative listening port for TLS and DTLS,

Dec  8 14:34:32 sun turnserver[960]:  #011#011#011#011#011#011the default is "TLS/DTLS port plus one".

Dec  8 14:34:32 sun turnserver[960]:  -L, --listening-ip#011#011<ip>#011#011Listener IP address of relay server. Multiple listeners can be specified.

Dec  8 14:34:32 sun turnserver[960]:  --aux-server#011#011#011<ip:port>#011Auxiliary STUN/TURN server listening endpoint.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Auxiliary servers do not have alternative ports and

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011they do not support RFC 5780 functionality (CHANGE REQUEST).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Valid formats are 1.2.3.4:5555 for IPv4 and [1:2::3:4]:5555 for IPv6.

Dec  8 14:34:32 sun turnserver[960]:  --udp-self-balance#011#011#011#011(recommended for older Linuxes only) Automatically balance UDP traffic

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011over auxiliary servers (if configured).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The load balancing is using the ALTERNATE-SERVER mechanism.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The TURN client must support 300 ALTERNATE-SERVER response for this functionality.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4900] dns-mgr[0x56499a1030f0]: init: dns=default, rc-manager=resolvconf

Dec  8 14:34:32 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:32 sun tor[929]: Dec 08 14:34:32.704 [notice] Tor 0.3.5.12 running on Linux with Libevent 2.1.8-stable, OpenSSL 1.1.1d, Zlib 1.2.11, Liblzma 5.2.4, and Libzstd 1.3.8.

Dec  8 14:34:32 sun tor[929]: Dec 08 14:34:32.704 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning

Dec  8 14:34:32 sun tor[929]: Dec 08 14:34:32.704 [notice] Read configuration file "/usr/share/tor/tor-service-defaults-torrc".

Dec  8 14:34:32 sun tor[929]: Dec 08 14:34:32.704 [notice] Read configuration file "/etc/tor/torrc".

Dec  8 14:34:32 sun turnserver[960]:  -i, --relay-device#011#011<device-name>#011Relay interface device for relay sockets (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:32 sun turnserver[960]:  -E, --relay-ip#011#011<ip>#011#011#011Relay address (the local IP address that will be used to relay the

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011packets to the peer).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Multiple relay addresses may be used.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The same IP(s) can be used as both listening IP(s) and relay IP(s).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011If no relay IP(s) specified, then the turnserver will apply the default

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011policy: it will decide itself which relay addresses to be used, and it

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011will always be using the client socket IP address as the relay IP address

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011of the TURN session (if the requested relay address family is the same

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011as the family of the client socket).

Dec  8 14:34:32 sun turnserver[960]:  -X, --external-ip  <public-ip[/private-ip]>#011TURN Server public/private address mapping, if the server is behind NAT.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011In that situation, if a -X is used in form "-X ip" then that ip will be reported

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011as relay IP address of all allocations. This scenario works only in a simple case

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011when one single relay address is be used, and no STUN CHANGE_REQUEST

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011functionality is required.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011That single relay address must be mapped by NAT to the 'external' IP.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011For that 'external' IP, NAT must forward ports directly (relayed port 12345

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011must be always mapped to the same 'external' port 12345).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011In more complex case when more than one IP address is involved,

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011that option must be used several times in the command line, each entry must

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011have form "-X public-ip/private-ip", to map all involved addresses.

Dec  8 14:34:32 sun turnserver[960]:  --allow-loopback-peers#011#011#011#011Allow peers on the loopback addresses (127.x.x.x and ::1).

Dec  8 14:34:32 sun turnserver[960]:  --no-multicast-peers#011#011#011#011Disallow peers on well-known broadcast addresses (224.0.0.0 and above, and FFXX:*).

Dec  8 14:34:32 sun turnserver[960]:  -m, --relay-threads#011#011<number>#011Number of relay threads to handle the established connections

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(in addition to authentication thread and the listener thread).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011If explicitly set to 0 then application runs in single-threaded mode.

Dec  8 14:34:32 sun kernel: [   68.939791] VBoxNetFlt: Successfully started.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4910] rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi)

Dec  8 14:34:32 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:32 sun tor[929]: Dec 08 14:34:32.727 [notice] Opening Socks listener on 127.0.0.1:9050

Dec  8 14:34:32 sun tor[929]: Dec 08 14:34:32.727 [notice] Opened Socks listener on 127.0.0.1:9050

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011If not set then a default OS-dependent optimal algorithm will be employed.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The default thread number is the number of CPUs.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011In older systems (pre-Linux 3.9) the number of UDP relay threads always equals

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011the number of listening endpoints (unless -m 0 is set).

Dec  8 14:34:32 sun turnserver[960]:  --min-port#011#011#011<port>#011#011Lower bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Default value is 49152, according to RFC 5766.

Dec  8 14:34:32 sun turnserver[960]:  --max-port#011#011#011<port>#011#011Upper bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Default value is 65535, according to RFC 5766.

Dec  8 14:34:32 sun turnserver[960]:  -v, --verbose#011#011#011#011#011'Moderate' verbose mode.

Dec  8 14:34:32 sun turnserver[960]:  -V, --Verbose#011#011#011#011#011Extra verbose mode, very annoying (for debug purposes only).

Dec  8 14:34:32 sun turnserver[960]:  -o, --daemon#011#011#011#011#011Start process as daemon (detach from current shell).

Dec  8 14:34:32 sun turnserver[960]:  --prod       #011 #011#011#011#011Production mode: hide the software version.

Dec  8 14:34:32 sun turnserver[960]:  -f, --fingerprint#011#011#011#011Use fingerprints in the TURN messages.

Dec  8 14:34:32 sun turnserver[960]:  -a, --lt-cred-mech#011#011#011#011Use the long-term credential mechanism.

Dec  8 14:34:32 sun turnserver[960]:  -z, --no-auth#011#011#011#011#011Do not use any credential mechanism, allow anonymous access.

Dec  8 14:34:32 sun turnserver[960]:  -u, --user#011#011#011<user:pwd>#011User account, in form 'username:password', for long-term credentials.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Cannot be used with TURN REST API.

Dec  8 14:34:32 sun turnserver[960]:  -r, --realm#011#011#011<realm>#011#011The default realm to be used for the users when no explicit

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011origin/realm relationship was found in the database.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Must be used with long-term credentials

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011mechanism or with TURN REST API.

Dec  8 14:34:32 sun turnserver[960]:  --check-origin-consistency#011#011#011The flag that sets the origin consistency check:

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011across the session, all requests must have the same

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011main ORIGIN attribute value (if the ORIGIN was

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011initially used by the session).

Dec  8 14:34:32 sun turnserver[960]:  -q, --user-quota#011#011<number>#011Per-user allocation quota: how many concurrent allocations a user can create.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun turnserver[960]:  -Q, --total-quota#011#011<number>#011Total allocations quota: global limit on concurrent allocations.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4914] manager[0x56499a0f6030]: rfkill: WiFi hardware radio set disabled

Dec  8 14:34:32 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:32 sun turnserver[960]:  -s, --max-bps#011#011#011<number>#011Default max bytes-per-second bandwidth a TURN session is allowed to handle

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(input and output network streams are treated separately). Anything above

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011that limit will be dropped or temporary suppressed

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(within the available buffer limits).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun turnserver[960]:  -B, --bps-capacity#011#011<number>#011Maximum server capacity.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Total bytes-per-second bandwidth the TURN server is allowed to allocate

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011for the sessions, combined (input and output network streams are treated separately).

Dec  8 14:34:32 sun turnserver[960]:  -c#011#011#011#011<filename>#011Configuration file name (default - turnserver.conf).

Dec  8 14:34:32 sun turnserver[960]:  -b, , --db, --userdb#011<filename>#011#011SQLite database file name; default - /var/db/turndb or

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011    /usr/local/var/db/turndb or /var/lib/turn/turndb.

Dec  8 14:34:32 sun turnserver[960]:  -e, --psql-userdb, --sql-userdb <conn-string>#011PostgreSQL database connection string, if used (default - empty, no PostreSQL DB used).

Dec  8 14:34:32 sun turnserver[960]: #011#011                                This database can be used for long-term credentials mechanism users,

Dec  8 14:34:32 sun turnserver[960]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011See http://www.postgresql.org/docs/8.4/static/libpq-connect.html for 8.x PostgreSQL

Dec  8 14:34:32 sun kernel: [   68.961386] VBoxNetAdp: Successfully started.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011versions format, see

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011for 9.x and newer connection string formats.

Dec  8 14:34:32 sun turnserver[960]:  -M, --mysql-userdb#011<connection-string>#011MySQL database connection string, if used (default - empty, no MySQL DB used).

Dec  8 14:34:32 sun turnserver[960]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:32 sun turnserver[960]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:32 sun turnserver[960]: #011        #011          #011#011"host=<ip-addr> dbname=<database-name> user=<database-user> \

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds> read_timeout=<seconds>".

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.4914] manager[0x56499a0f6030]: rfkill: WWAN hardware radio set disabled

Dec  8 14:34:32 sun turnserver: 0: TLS supported

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The connection string parameters for the secure communications (SSL):

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011ca, capath, cert, key, cipher

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(see http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html for the

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011command options description).

Dec  8 14:34:32 sun turnserver[960]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:32 sun turnserver[960]:  --secret-key-file#011<filename>#011#011This is the file path which contain secret key of aes encryption while using MySQL password encryption.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011If you want to use in the MySQL connection string the password in encrypted format,

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011then set in this option the file path of the secret key. The key which is used to encrypt MySQL password.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Warning: If this option is set, then MySQL password must be set in "mysql-userdb" option in encrypted format!

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011If you want to use cleartext password then do not set this option!

Dec  8 14:34:32 sun turnserver[960]:  -N, --redis-userdb#011<connection-string>#011Redis user database connection string, if used (default - empty, no Redis DB used).

Dec  8 14:34:32 sun turnserver[960]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:32 sun turnserver[960]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:32 sun turnserver[960]: #011        #011          #011#011"host=<ip-addr> dbname=<db-number> \

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds>".

Dec  8 14:34:32 sun turnserver[960]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:32 sun turnserver[960]:  -O, --redis-statsdb#011<connection-string>#011Redis status and statistics database connection string, if used

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(default - empty, no Redis stats DB used).

Dec  8 14:34:32 sun turnserver[960]: #011                                #011This database keeps allocations status information, and it can be also used for publishing

Dec  8 14:34:32 sun turnserver[960]: #011#011                                and delivering traffic and allocation event notifications.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The connection string has the same parameters as redis-userdb connection string.

Dec  8 14:34:32 sun turnserver[960]:  --use-auth-secret#011#011#011#011TURN REST API flag.

Dec  8 14:34:32 sun systemd[1]: Starting Network Manager Script Dispatcher Service...

Dec  8 14:34:32 sun kernel: [   68.987675] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready

Dec  8 14:34:32 sun kernel: [   68.987862] r8169 0000:09:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)

Dec  8 14:34:32 sun kernel: [   68.987867] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware

Dec  8 14:34:32 sun kernel: [   68.987870] r8169 0000:09:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2

Dec  8 14:34:32 sun kernel: [   68.987874] r8169 0000:09:00.0 enp9s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)

Dec  8 14:34:32 sun kernel: [   68.991170] RTL8211E Gigabit Ethernet r8169-900:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)

Dec  8 14:34:32 sun turnserver: 0: DTLS supported

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Flag that sets a special authorization option that is based upon authentication secret

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(TURN Server REST API, see TURNServerRESTAPI.pdf). This option is used with timestamp.

Dec  8 14:34:32 sun turnserver[960]:  --static-auth-secret#011#011<secret>#011'Static' authentication secret value (a string) for TURN REST API only.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011If not set, then the turn server will try to use the 'dynamic' value

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011in turn_secret table in user database (if present).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011That database value can be changed on-the-fly

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011by a separate program, so this is why it is 'dynamic'.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Multiple shared secrets can be used (both in the database and in the "static" fashion).

Dec  8 14:34:32 sun turnserver[960]:  --server-name#011#011#011#011#011Server name used for

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011the oAuth authentication purposes.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The default value is the realm name.

Dec  8 14:34:32 sun turnserver[960]:  --oauth#011#011#011#011#011Support oAuth authentication.

Dec  8 14:34:32 sun turnserver[960]:  -n#011#011#011#011#011#011Do not use configuration file, take all parameters from the command line only.

Dec  8 14:34:32 sun turnserver[960]:  --cert#011#011#011<filename>#011#011Certificate file, PEM format. Same file search rules

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011If both --no-tls and --no_dtls options

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011are specified, then this parameter is not needed.

Dec  8 14:34:32 sun turnserver[960]:  --pkey#011#011#011<filename>#011#011Private key file, PEM format. Same file search rules

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011If both --no-tls and --no-dtls options

Dec  8 14:34:32 sun turnserver[960]:  --pkey-pwd#011#011<password>#011#011If the private key file is encrypted, then this password to be used.

Dec  8 14:34:32 sun turnserver[960]:  --cipher-list#011<"cipher-string">#011#011Allowed OpenSSL cipher list for TLS/DTLS connections.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Default value is "DEFAULT".

Dec  8 14:34:32 sun turnserver[960]:  --CA-file#011#011<filename>#011#011CA file in OpenSSL format.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Forces TURN server to verify the client SSL certificates.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011By default, no CA is set and no client certificate check is performed.

Dec  8 14:34:32 sun turnserver[960]:  --ec-curve-name#011<curve-name>#011#011Curve name for EC ciphers, if supported by OpenSSL

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011library (TLS and DTLS). The default value is prime256v1,

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011if pre-OpenSSL 1.0.2 is used. With OpenSSL 1.0.2+,

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011an optimal curve will be automatically calculated, if not defined

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011by this option.

Dec  8 14:34:32 sun systemd[1]: Started Disk Manager.

Dec  8 14:34:32 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:32 sun turnserver[960]:  --dh566#011#011#011#011#011Use 566 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:32 sun turnserver[960]:  --dh2066#011#011#011#011#011Use 2066 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:32 sun turnserver[960]:  --dh-file#011<dh-file-name>#011#011#011Use custom DH TLS key, stored in PEM format in the file.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Flags --dh566 and --dh2066 are ignored when the DH key is taken from a file.

Dec  8 14:34:32 sun turnserver[960]:  --no-tlsv1#011#011#011#011#011Do not allow TLSv1/DTLSv1 protocol.

Dec  8 14:34:32 sun turnserver[960]:  --no-tlsv1_1#011#011#011#011#011Do not allow TLSv1.1 protocol.

Dec  8 14:34:32 sun turnserver[960]:  --no-tlsv1_2#011#011#011#011#011Do not allow TLSv1.2/DTLSv1.2 protocol.

Dec  8 14:34:32 sun turnserver[960]:  --no-udp#011#011#011#011#011Do not start UDP client listeners.

Dec  8 14:34:32 sun turnserver[960]:  --no-tcp#011#011#011#011#011Do not start TCP client listeners.

Dec  8 14:34:32 sun turnserver[960]:  --no-tls#011#011#011#011#011Do not start TLS client listeners.

Dec  8 14:34:32 sun turnserver[960]:  --no-dtls#011#011#011#011#011Do not start DTLS client listeners.

Dec  8 14:34:32 sun turnserver[960]:  --no-udp-relay#011#011#011#011#011Do not allow UDP relay endpoints, use only TCP relay option.

Dec  8 14:34:32 sun turnserver[960]:  --no-tcp-relay#011#011#011#011#011Do not allow TCP relay endpoints, use only UDP relay options.

Dec  8 14:34:32 sun turnserver[960]:  -l, --log-file#011#011<filename>#011#011Option to set the full path name of the log file.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011By default, the turnserver tries to open a log file in

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011/var/log/turnserver/, /var/log, /var/tmp, /tmp and . (current) directories

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(which open operation succeeds first that file will be used).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011With this option you can set the definite log file name.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The special names are "stdout" and "-" - they will force everything

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011to the stdout; and "syslog" name will force all output to the syslog.

Dec  8 14:34:32 sun turnserver[960]:  --no-stdout-log#011#011#011#011Flag to prevent stdout log messages.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011By default, all log messages are going to both stdout and to

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011a log file. With this option everything will be going to the log file only

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(unless the log file itself is stdout).

Dec  8 14:34:32 sun turnserver[960]:  --syslog#011#011#011#011#011Output all log information into the system log (syslog), do not use the file output.

Dec  8 14:34:32 sun turnserver[960]:  --simple-log#011#011#011#011#011This flag means that no log file rollover will be used, and the log file

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011name will be constructed as-is, without PID and date appendage.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011This option can be used, for example, together with the logrotate tool.

Dec  8 14:34:32 sun udisksd[722]: Acquired the name org.freedesktop.UDisks2 on the system message bus

Dec  8 14:34:32 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:32 sun turnserver[960]:  --stale-nonce[=<value>]#011#011#011Use extra security with nonce value having limited lifetime (default 600 secs).

Dec  8 14:34:32 sun turnserver[960]:  --max-allocate-lifetime#011<value>#011#011Set the maximum value for the allocation lifetime. Default to 3600 secs.

Dec  8 14:34:32 sun turnserver[960]:  --channel-lifetime#011#011<value>#011#011Set the lifetime for channel binding, default to 600 secs.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011This value MUST not be changed for production purposes.

Dec  8 14:34:32 sun turnserver[960]:  --permission-lifetime#011#011<value>#011#011Set the value for the lifetime of the permission. Default to 300 secs.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011This MUST not be changed for production purposes.

Dec  8 14:34:32 sun turnserver[960]:  -S, --stun-only#011#011#011#011Option to set standalone STUN operation only, all TURN requests will be ignored.

Dec  8 14:34:32 sun turnserver[960]:      --no-stun#011#011#011#011#011Option to suppress STUN functionality, only TURN requests will be processed.

Dec  8 14:34:32 sun turnserver[960]:  --alternate-server#011#011<ip:port>#011Set the TURN server to redirect the allocate requests (UDP and TCP services).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:32 sun turnserver[960]:  --tls-alternate-server#011<ip:port>#011#011Set the TURN server to redirect the allocate requests (DTLS and TLS services).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:32 sun turnserver[960]:  -C, --rest-api-separator#011<SYMBOL>#011This is the timestamp/username separator symbol (character) in TURN REST API.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The default value is ':'.

Dec  8 14:34:32 sun turnserver[960]:  --max-allocate-timeout=<seconds>#011#011Max time, in seconds, allowed for full allocation establishment. Default is 60.

Dec  8 14:34:32 sun turnserver[960]:  --allowed-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are explicitly allowed to connect to the

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011turn server. Multiple allowed-peer-ip can be set.

Dec  8 14:34:32 sun turnserver[960]:  --denied-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are not allowed to connect to the turn server.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Multiple denied-peer-ip can be set.

Dec  8 14:34:32 sun turnserver[960]:  --pidfile <"pid-file-name">#011#011#011File name to store the pid of the process.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Default is /var/run/turnserver.pid (if superuser account is used) or

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011/var/tmp/turnserver.pid .

Dec  8 14:34:32 sun turnserver[960]:  --secure-stun#011#011#011#011#011Require authentication of the STUN Binding request.

Dec  8 14:34:32 sun systemd[1]: Started Network Manager Script Dispatcher Service.

Dec  8 14:34:32 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011By default, the clients are allowed anonymous access to the STUN Binding functionality.

Dec  8 14:34:32 sun turnserver[960]:  --proc-user <user-name>#011#011#011User name to run the turnserver process.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011will make an attempt to change the current user ID to that user.

Dec  8 14:34:32 sun turnserver[960]:  --proc-group <group-name>#011#011#011Group name to run the turnserver process.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011will make an attempt to change the current group ID to that group.

Dec  8 14:34:32 sun turnserver[960]:  --mobility#011#011#011#011#011Mobility with ICE (MICE) specs support.

Dec  8 14:34:32 sun turnserver[960]:  -K, --keep-address-family#011#011#011TURN server allocates address family according TURN

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011Client <=> Server communication address family.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011!! It breaks RFC6156 section-4.2 (violates default IPv4) !!

Dec  8 14:34:32 sun turnserver[960]:  --no-cli#011#011#011#011#011Turn OFF the CLI support. By default it is always ON.

Dec  8 14:34:32 sun turnserver[960]:  --cli-ip=<IP>#011#011#011#011#011Local system IP address to be used for CLI server endpoint. Default value

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:32 sun turnserver[960]:  --cli-port=<port>#011#011#011#011CLI server port. Default is 5766.

Dec  8 14:34:32 sun turnserver[960]:  --cli-password=<password>#011#011#011CLI access password. Default is empty (no password).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011For the security reasons, it is recommended to use the encrypted

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011for of the password (see the -P command in the turnadmin utility).

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011The dollar signs in the encrypted form must be escaped.

Dec  8 14:34:32 sun turnserver[960]:  --web-admin#011#011#011#011#011Enable Turn Web-admin support. By default it is disabled.

Dec  8 14:34:32 sun turnserver[960]:  --web-admin-ip=<IP>#011#011#011#011Local system IP address to be used for Web-admin server endpoint. Default value

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:32 sun turnserver[960]:  --web-admin-port=<port>#011#011#011Web-admin server port. Default is 8080.

Dec  8 14:34:32 sun turnserver[960]:  --web-admin-listen-on-workers#011#011#011Enable for web-admin server to listens on STUN/TURN workers STUN/TURN ports.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011By default it is disabled for security resons!

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011(This behavior used to be the default behavior, and was enabled by default.)

Dec  8 14:34:32 sun turnserver[960]:  --server-relay#011#011#011#011#011Server relay. NON-STANDARD AND DANGEROUS OPTION. Only for those applications

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011when we want to run server applications on the relay endpoints.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011This option eliminates the IP permissions check on the packets

Dec  8 14:34:32 sun systemd[1]: coturn.service: Service RestartSec=100ms expired, scheduling restart.

Dec  8 14:34:32 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011incoming to the relay endpoints.

Dec  8 14:34:32 sun turnserver[960]:  --cli-max-output-sessions#011#011#011Maximum number of output sessions in ps CLI command.

Dec  8 14:34:32 sun turnserver[960]: #011#011#011#011#011#011This value can be changed on-the-fly in CLI. The default value is 256.

Dec  8 14:34:32 sun turnserver[960]:  --ne=[1|2|3]#011#011#011#011#011Set network engine type for the process (for internal purposes).

Dec  8 14:34:32 sun turnserver[960]:  -h#011#011#011#011#011#011Help

Dec  8 14:34:32 sun turnserver[960]:  For more information, see the wiki pages:

Dec  8 14:34:32 sun turnserver[960]: #011https://github.com/coturn/coturn/wiki/

Dec  8 14:34:32 sun turnserver[960]: 0: log file opened: /var/tmp/turn_960_2020-12-08.log

Dec  8 14:34:32 sun turnserver[960]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 0.0.0.0-0.255.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 10.0.0.0-10.255.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 100.64.0.0-100.127.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 169.254.0.0-169.254.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 172.16.0.0-172.31.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 192.0.0.0-192.0.0.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 192.0.2.0-192.0.2.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 192.88.99.0-192.88.99.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 192.168.0.0-192.168.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 198.18.0.0-198.19.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 198.51.100.0-198.51.100.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 203.0.113.0-203.0.113.255

Dec  8 14:34:32 sun turnserver[960]: 0: Black listing: 240.0.0.0-255.255.255.255

Dec  8 14:34:32 sun turnserver[960]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun turnserver[960]: 0:

Dec  8 14:34:32 sun turnserver[960]: RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server

Dec  8 14:34:32 sun turnserver[960]: Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:32 sun turnserver[960]: 0:

Dec  8 14:34:32 sun turnserver[960]: Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:32 sun turnserver[960]: 0:

Dec  8 14:34:32 sun turnserver[960]: Due to the open files/sockets limitation,

Dec  8 14:34:32 sun turnserver[960]: max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:32 sun turnserver[960]: 0:

Dec  8 14:34:32 sun turnserver[960]: ==== Show him the instruments, Practical Frost: ====

Dec  8 14:34:32 sun turnserver[960]: 0: TLS supported

Dec  8 14:34:32 sun turnserver[960]: 0: DTLS supported

Dec  8 14:34:32 sun turnserver[960]: 0: DTLS 1.2 supported

Dec  8 14:34:32 sun turnserver[960]: 0: TURN/STUN ALPN supported

Dec  8 14:34:32 sun turnserver[960]: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:32 sun turnserver[960]: 0: GCM (AEAD) supported

Dec  8 14:34:32 sun turnserver[960]: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:32 sun turnserver[960]: 0:

Dec  8 14:34:32 sun turnserver[960]: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:32 sun turnserver[960]: 0: Redis supported

Dec  8 14:34:32 sun turnserver[960]: 0: PostgreSQL supported

Dec  8 14:34:32 sun turnserver[960]: 0: MySQL supported

Dec  8 14:34:32 sun turnserver[960]: 0: MongoDB is not supported

Dec  8 14:34:32 sun turnserver[960]: 0:

Dec  8 14:34:32 sun turnserver[960]: 0: Default Net Engine version: 3 (UDP thread per CPU core)

Dec  8 14:34:32 sun turnserver[960]: =====================================================

Dec  8 14:34:32 sun systemd[1]: coturn.service: Scheduled restart job, restart counter is at 1.

Dec  8 14:34:32 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:32 sun turnserver[960]: 0: Domain name:

Dec  8 14:34:32 sun turnserver[960]: 0: Default realm: sun.0i0.fr

Dec  8 14:34:32 sun turnserver[960]: 0:

Dec  8 14:34:32 sun turnserver[960]: CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:32 sun turnserver[960]: 0: ERROR:

Dec  8 14:34:32 sun turnserver[960]: CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:32 sun turnserver[960]: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:32 sun turnserver[960]: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:32 sun turnserver[960]: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:32 sun turnserver[960]: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:32 sun turnserver[960]: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:32 sun turnserver[960]: 0: Listener address to use: ::1

Dec  8 14:34:32 sun turnserver[960]: 0: ERROR: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:32 sun systemd[1]: Stopped coTURN STUN/TURN Server.

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun systemd[1]: Starting coTURN STUN/TURN Server...

Dec  8 14:34:32 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5912] ifupdown:       interface-parser: parsing file /etc/network/interfaces

Dec  8 14:34:32 sun turnserver: 0: Redis supported

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5913] ifupdown:       interface-parser: source line includes interfaces file(s) /etc/network/interfaces.d/*

Dec  8 14:34:32 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:32 sun NetworkManager[741]: <warn>  [1607434472.5913] ifupdown: interfaces file /etc/network/interfaces.d/* doesn't exist

Dec  8 14:34:32 sun turnserver: 0: MySQL supported

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5913] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces

Dec  8 14:34:32 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5914] ifupdown: management mode: unmanaged

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5914] settings: Loaded settings plugin: SettingsPluginIfupdown ("/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-settings-plugin-ifupdown.so")

Dec  8 14:34:32 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.5914] settings: Loaded settings plugin: NMSKeyfilePlugin (internal)

Dec  8 14:34:32 sun turnserver: 0: Domain name: 

Dec  8 14:34:32 sun systemd[1]: nginx.service: Failed to parse PID from file /run/nginx.pid: Invalid argument

Dec  8 14:34:32 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6035] keyfile: new connection /etc/NetworkManager/system-connections/Auto SFR_A2DF_Ext.nmconnection (d6f2dbf8-5a37-46f2-88a5-cd1ff6df6a47,"Auto SFR_A2DF_Ext")

Dec  8 14:34:32 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6064] keyfile: new connection /etc/NetworkManager/system-connections/Auto SFR_A2DF.nmconnection (c532a6eb-d203-454e-865e-bf13dcccad37,"Auto SFR_A2DF")

Dec  8 14:34:32 sun turnserver: 0: #012CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6088] keyfile: new connection /etc/NetworkManager/system-connections/Auto SFR_D3AF.nmconnection (57e5d22c-0e4d-4864-8770-163c9f964cbe,"Auto SFR_D3AF")

Dec  8 14:34:32 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6120] keyfile: new connection /etc/NetworkManager/system-connections/Auto FairCastle.nmconnection (b6b7698b-4ffe-480c-8d7d-c78654f037b7,"Auto FairCastle")

Dec  8 14:34:32 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6148] keyfile: new connection /etc/NetworkManager/system-connections/Auto Lalis-2G.nmconnection (691400e4-1f6e-48e4-88af-a1059078bf0b,"Auto Lalis-2G")

Dec  8 14:34:32 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6182] keyfile: new connection /etc/NetworkManager/system-connections/Auto litle-castel.nmconnection (958a24cb-0fda-4a4b-895d-64bc6d7a9a0f,"Auto litle-castel")

Dec  8 14:34:32 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6236] keyfile: new connection /etc/NetworkManager/system-connections/Auto Castel.nmconnection (455209ad-a71b-43f4-9b52-9033b53acac0,"Auto Castel")

Dec  8 14:34:32 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6266] keyfile: new connection /etc/NetworkManager/system-connections/freebox_cathy.nmconnection (f3e0faf3-2c1c-4792-93d2-a44278ab39f3,"freebox_cathy")

Dec  8 14:34:32 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6295] keyfile: new connection /etc/NetworkManager/system-connections/Auto LitleBoat.nmconnection (c9ac6baa-bfc6-4060-924b-c04c4b2e87e9,"Auto LitleBoat")

Dec  8 14:34:32 sun turnserver: 0: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6359] keyfile: new connection /etc/NetworkManager/system-connections/192.168.1.6.nmconnection (266e10fd-51db-4e1d-9231-6f82216a23b4,"192.168.1.6")

Dec  8 14:34:32 sun Tor[929]: Tor 0.3.5.12 running on Linux with Libevent 2.1.8-stable, OpenSSL 1.1.1d, Zlib 1.2.11, Liblzma 5.2.4, and Libzstd 1.3.8.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6416] keyfile: new connection /etc/NetworkManager/system-connections/192.168.2.2.nmconnection (268b7833-1fb4-417c-8a89-b7764e27d655,"192.168.2.2")

Dec  8 14:34:32 sun Tor[929]: Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6453] keyfile: new connection /etc/NetworkManager/system-connections/Auto OpenWrt.nmconnection (d5e27b61-5683-4701-a0e6-ba5e42881468,"Auto OpenWrt")

Dec  8 14:34:32 sun Tor[929]: Read configuration file "/usr/share/tor/tor-service-defaults-torrc".

Dec  8 14:34:32 sun systemd[1]: Started A high performance web server and a reverse proxy server.

Dec  8 14:34:32 sun Tor[929]: Read configuration file "/etc/tor/torrc".

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6536] keyfile: new connection /etc/NetworkManager/system-connections/Auto wifi-01.nmconnection (de48816a-5dbc-48b8-a857-41984954ab3a,"Auto wifi-01")

Dec  8 14:34:32 sun Tor[929]: Opening Socks listener on 127.0.0.1:9050

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6590] keyfile: new connection /etc/NetworkManager/system-connections/Hotspot.nmconnection (06e0143f-46f0-4767-9230-6f08cb0a46f7,"Hotspot")

Dec  8 14:34:32 sun Tor[929]: Opened Socks listener on 127.0.0.1:9050

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6656] keyfile: new connection /etc/NetworkManager/system-connections/Auto Bbox-46A04483.nmconnection (b21dbee3-438f-43a7-8ad4-c2a3a763397e,"Auto Bbox-46A04483")

Dec  8 14:34:32 sun nm-dispatcher: req:1 'hostname': new request (1 scripts)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6693] keyfile: new connection /etc/NetworkManager/system-connections/Auto Bbox-37terAvenueJonkind.nmconnection (ec0e5a6e-11d5-4797-8387-626b4a1876f6,"Auto Bbox-37terAvenueJonkind")

Dec  8 14:34:32 sun nm-dispatcher: req:1 'hostname': start running ordered scripts...

Dec  8 14:34:32 sun NetworkManager[741]: <warn>  [1607434472.6756] keyfile: cannot load /etc/NetworkManager/system-connections/Hotspot.nmconnection.bak due to conflicting UUID for /etc/NetworkManager/system-connections/Hotspot.nmconnection (06e0143f-46f0-4767-9230-6f08cb0a46f7,"Hotspot")

Dec  8 14:34:32 sun kernel: [   69.106480] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready

Dec  8 14:34:32 sun Tor[929]: Parsing GEOIP IPv4 file /usr/share/tor/geoip.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6825] keyfile: new connection /etc/NetworkManager/system-connections/Auto 12.nmconnection (5d194f1d-a8eb-4c03-b500-8d116b36931c,"Auto 12")

Dec  8 14:34:32 sun vboxdrv.sh: VirtualBox services started.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6867] keyfile: new connection /etc/NetworkManager/system-connections/10.0.0.10_8.nmconnection (4fbb05b5-0af5-437c-92dc-3f8958628bbc,"10.0.0.10/8")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6923] keyfile: new connection /etc/NetworkManager/system-connections/DHCP.nmconnection (051f69e2-8743-4fea-b376-dc5a2888c605,"DHCP")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.6981] keyfile: new connection /etc/NetworkManager/system-connections/192.168.0.100_24.nmconnection (e4508d2b-aa93-4e90-becb-20fc13c46dcc,"192.168.0.100/24")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7047] keyfile: new connection /etc/NetworkManager/system-connections/Auto Bbox-B64BA508.nmconnection (b5b06ec1-1e8f-4130-9d74-cc1c5b2d882d,"Auto Bbox-B64BA508")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7090] keyfile: new connection /etc/NetworkManager/system-connections/Auto Lalis.nmconnection (f45c770e-6f9b-435d-a25b-c1289dcd3f7d,"Auto Lalis")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7136] keyfile: new connection /etc/NetworkManager/system-connections/Auto castle_2.4GHz.nmconnection (de597337-e386-4b2b-b043-ad88e4e4cee1,"Auto castle_2.4GHz")

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7448] manager: rfkill: WiFi disabled by radio killswitch; disabled by state file

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7449] manager: rfkill: WWAN enabled by radio killswitch; disabled by state file

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7451] manager: Networking is enabled by state file

Dec  8 14:34:32 sun systemd[1]: coturn.service: Control process exited, code=exited, status=255/EXCEPTION

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7453] dhcp-init: Using DHCP client 'dhclient'

Dec  8 14:34:32 sun systemd[1]: coturn.service: Failed with result 'exit-code'.

Dec  8 14:34:32 sun kernel: [   69.111006] r8169 0000:09:00.0 enp9s0: Link is Down

Dec  8 14:34:32 sun systemd[1]: Failed to start coTURN STUN/TURN Server.

Dec  8 14:34:32 sun nm-dispatcher: req:2 'connectivity-change': new request (1 scripts)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7545] Loaded device plugin: NMTeamFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-team.so)

Dec  8 14:34:32 sun nm-dispatcher: req:2 'connectivity-change': start running ordered scripts...

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7650] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-bluetooth.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7670] Loaded device plugin: NMAtmManager (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-adsl.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7713] Loaded device plugin: NMWifiFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-wifi.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7736] Loaded device plugin: NMWwanFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/1.14.6/libnm-device-plugin-wwan.so)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7751] device (lo): carrier: link connected

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7756] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7773] manager: (enp9s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.7788] device (enp9s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')

Dec  8 14:34:32 sun systemd[1]: coturn.service: Service RestartSec=100ms expired, scheduling restart.

Dec  8 14:34:32 sun systemd[1]: coturn.service: Scheduled restart job, restart counter is at 2.

Dec  8 14:34:32 sun systemd[1]: Stopped coTURN STUN/TURN Server.

Dec  8 14:34:32 sun systemd[1]: Starting coTURN STUN/TURN Server...

Dec  8 14:34:32 sun systemd[1]: Started VirtualBox Linux kernel module.

Dec  8 14:34:32 sun systemd[1]: Starting vboxballoonctrl-service.service...

Dec  8 14:34:32 sun systemd[1]: Starting vboxautostart-service.service...

Dec  8 14:34:32 sun colord[829]: failed to get session [pid 748]: Aucune donnée disponible

Dec  8 14:34:32 sun systemd[1]: Started vboxballoonctrl-service.service.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.9033] device (wlp3s0): driver supports Access Point (AP) mode

Dec  8 14:34:32 sun systemd[1]: Started vboxautostart-service.service.

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.9196] manager: (wlp3s0): new 802.11 WiFi device (/org/freedesktop/NetworkManager/Devices/3)

Dec  8 14:34:32 sun colord[829]: failed to get session [pid 748]: Aucune donnée disponible

Dec  8 14:34:32 sun kernel: [   69.145870] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.9370] device (wlp3s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')

Dec  8 14:34:32 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:32 sun NetworkManager[741]: <info>  [1607434472.9414] device (wlp3s0): set-hw-addr: set MAC address to EA:DB:F1:BE:94:74 (scanning)

Dec  8 14:34:32 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:32 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:32 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:32 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:32 sun turnserver: 0: TLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS supported

Dec  8 14:34:32 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:32 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:32 sun turnserver[994]: Usage: turnserver [options]

Dec  8 14:34:32 sun turnserver[994]: Options:

Dec  8 14:34:32 sun turnserver[994]:  -d, --listening-device#011<device-name>#011#011Listener interface device (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:32 sun turnserver[994]:  -p, --listening-port#011#011<port>#011#011TURN listener port (Default: 3478).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Note: actually, TLS & DTLS sessions can connect to the "plain" TCP & UDP port(s), too,

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011if allowed by configuration.

Dec  8 14:34:32 sun turnserver[994]:  --tls-listening-port#011#011<port>#011#011TURN listener port for TLS & DTLS listeners

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011(Default: 5349).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Note: actually, "plain" TCP & UDP sessions can connect to the TLS & DTLS port(s), too,

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011if allowed by configuration. The TURN server

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011"automatically" recognizes the type of traffic. Actually, two listening

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011endpoints (the "plain" one and the "tls" one) are equivalent in terms of

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011functionality; but we keep both endpoints to satisfy the RFC 5766 specs.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011For secure TCP connections, we currently support SSL version 3 and

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011TLS versions 1.0, 1.1 and 1.2. For secure UDP connections, we support

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011DTLS version 1.

Dec  8 14:34:32 sun turnserver[994]:  --alt-listening-port<port>#011<port>#011#011Alternative listening port for STUN CHANGE_REQUEST (in RFC 5780 sense,

Dec  8 14:34:32 sun turnserver[994]:                                                 or in old RFC 3489 sense, default is "listening port plus one").

Dec  8 14:34:32 sun turnserver[994]:  --alt-tls-listening-port#011<port>#011#011Alternative listening port for TLS and DTLS,

Dec  8 14:34:32 sun turnserver[994]:  #011#011#011#011#011#011the default is "TLS/DTLS port plus one".

Dec  8 14:34:32 sun turnserver[994]:  -L, --listening-ip#011#011<ip>#011#011Listener IP address of relay server. Multiple listeners can be specified.

Dec  8 14:34:32 sun turnserver[994]:  --aux-server#011#011#011<ip:port>#011Auxiliary STUN/TURN server listening endpoint.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Auxiliary servers do not have alternative ports and

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011they do not support RFC 5780 functionality (CHANGE REQUEST).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Valid formats are 1.2.3.4:5555 for IPv4 and [1:2::3:4]:5555 for IPv6.

Dec  8 14:34:32 sun turnserver[994]:  --udp-self-balance#011#011#011#011(recommended for older Linuxes only) Automatically balance UDP traffic

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011over auxiliary servers (if configured).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011The load balancing is using the ALTERNATE-SERVER mechanism.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011The TURN client must support 300 ALTERNATE-SERVER response for this functionality.

Dec  8 14:34:32 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:32 sun turnserver[994]:  -i, --relay-device#011#011<device-name>#011Relay interface device for relay sockets (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:32 sun turnserver[994]:  -E, --relay-ip#011#011<ip>#011#011#011Relay address (the local IP address that will be used to relay the

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011packets to the peer).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Multiple relay addresses may be used.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011The same IP(s) can be used as both listening IP(s) and relay IP(s).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011If no relay IP(s) specified, then the turnserver will apply the default

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011policy: it will decide itself which relay addresses to be used, and it

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011will always be using the client socket IP address as the relay IP address

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011of the TURN session (if the requested relay address family is the same

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011as the family of the client socket).

Dec  8 14:34:32 sun turnserver[994]:  -X, --external-ip  <public-ip[/private-ip]>#011TURN Server public/private address mapping, if the server is behind NAT.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011In that situation, if a -X is used in form "-X ip" then that ip will be reported

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011as relay IP address of all allocations. This scenario works only in a simple case

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011when one single relay address is be used, and no STUN CHANGE_REQUEST

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011functionality is required.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011That single relay address must be mapped by NAT to the 'external' IP.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011For that 'external' IP, NAT must forward ports directly (relayed port 12345

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011must be always mapped to the same 'external' port 12345).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011In more complex case when more than one IP address is involved,

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011that option must be used several times in the command line, each entry must

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011have form "-X public-ip/private-ip", to map all involved addresses.

Dec  8 14:34:32 sun turnserver[994]:  --allow-loopback-peers#011#011#011#011Allow peers on the loopback addresses (127.x.x.x and ::1).

Dec  8 14:34:32 sun turnserver[994]:  --no-multicast-peers#011#011#011#011Disallow peers on well-known broadcast addresses (224.0.0.0 and above, and FFXX:*).

Dec  8 14:34:32 sun turnserver[994]:  -m, --relay-threads#011#011<number>#011Number of relay threads to handle the established connections

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011(in addition to authentication thread and the listener thread).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011If explicitly set to 0 then application runs in single-threaded mode.

Dec  8 14:34:32 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011If not set then a default OS-dependent optimal algorithm will be employed.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011The default thread number is the number of CPUs.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011In older systems (pre-Linux 3.9) the number of UDP relay threads always equals

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011the number of listening endpoints (unless -m 0 is set).

Dec  8 14:34:32 sun turnserver[994]:  --min-port#011#011#011<port>#011#011Lower bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Default value is 49152, according to RFC 5766.

Dec  8 14:34:32 sun turnserver[994]:  --max-port#011#011#011<port>#011#011Upper bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Default value is 65535, according to RFC 5766.

Dec  8 14:34:32 sun turnserver[994]:  -v, --verbose#011#011#011#011#011'Moderate' verbose mode.

Dec  8 14:34:32 sun turnserver[994]:  -V, --Verbose#011#011#011#011#011Extra verbose mode, very annoying (for debug purposes only).

Dec  8 14:34:32 sun turnserver[994]:  -o, --daemon#011#011#011#011#011Start process as daemon (detach from current shell).

Dec  8 14:34:32 sun turnserver[994]:  --prod       #011 #011#011#011#011Production mode: hide the software version.

Dec  8 14:34:32 sun turnserver[994]:  -f, --fingerprint#011#011#011#011Use fingerprints in the TURN messages.

Dec  8 14:34:32 sun turnserver[994]:  -a, --lt-cred-mech#011#011#011#011Use the long-term credential mechanism.

Dec  8 14:34:32 sun turnserver[994]:  -z, --no-auth#011#011#011#011#011Do not use any credential mechanism, allow anonymous access.

Dec  8 14:34:32 sun turnserver[994]:  -u, --user#011#011#011<user:pwd>#011User account, in form 'username:password', for long-term credentials.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Cannot be used with TURN REST API.

Dec  8 14:34:32 sun turnserver[994]:  -r, --realm#011#011#011<realm>#011#011The default realm to be used for the users when no explicit

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011origin/realm relationship was found in the database.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Must be used with long-term credentials

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011mechanism or with TURN REST API.

Dec  8 14:34:32 sun turnserver[994]:  --check-origin-consistency#011#011#011The flag that sets the origin consistency check:

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011across the session, all requests must have the same

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011main ORIGIN attribute value (if the ORIGIN was

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011initially used by the session).

Dec  8 14:34:32 sun turnserver[994]:  -q, --user-quota#011#011<number>#011Per-user allocation quota: how many concurrent allocations a user can create.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun turnserver[994]:  -Q, --total-quota#011#011<number>#011Total allocations quota: global limit on concurrent allocations.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:32 sun systemd[1]: coturn.service: Control process exited, code=exited, status=255/EXCEPTION

Dec  8 14:34:32 sun turnserver[994]:  -s, --max-bps#011#011#011<number>#011Default max bytes-per-second bandwidth a TURN session is allowed to handle

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011(input and output network streams are treated separately). Anything above

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011that limit will be dropped or temporary suppressed

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011(within the available buffer limits).

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:32 sun turnserver[994]:  -B, --bps-capacity#011#011<number>#011Maximum server capacity.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011Total bytes-per-second bandwidth the TURN server is allowed to allocate

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011for the sessions, combined (input and output network streams are treated separately).

Dec  8 14:34:32 sun turnserver[994]:  -c#011#011#011#011<filename>#011Configuration file name (default - turnserver.conf).

Dec  8 14:34:32 sun turnserver[994]:  -b, , --db, --userdb#011<filename>#011#011SQLite database file name; default - /var/db/turndb or

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011    /usr/local/var/db/turndb or /var/lib/turn/turndb.

Dec  8 14:34:32 sun turnserver[994]:  -e, --psql-userdb, --sql-userdb <conn-string>#011PostgreSQL database connection string, if used (default - empty, no PostreSQL DB used).

Dec  8 14:34:32 sun turnserver[994]: #011#011                                This database can be used for long-term credentials mechanism users,

Dec  8 14:34:32 sun turnserver[994]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011See http://www.postgresql.org/docs/8.4/static/libpq-connect.html for 8.x PostgreSQL

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011versions format, see

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011for 9.x and newer connection string formats.

Dec  8 14:34:32 sun turnserver[994]:  -M, --mysql-userdb#011<connection-string>#011MySQL database connection string, if used (default - empty, no MySQL DB used).

Dec  8 14:34:32 sun turnserver[994]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:32 sun turnserver[994]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:32 sun turnserver[994]: #011        #011          #011#011"host=<ip-addr> dbname=<database-name> user=<database-user> \

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds> read_timeout=<seconds>".

Dec  8 14:34:32 sun turnserver: 0: 

Dec  8 14:34:32 sun systemd[1]: coturn.service: Failed with result 'exit-code'.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011The connection string parameters for the secure communications (SSL):

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011ca, capath, cert, key, cipher

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011(see http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html for the

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011command options description).

Dec  8 14:34:32 sun turnserver[994]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:32 sun turnserver[994]:  --secret-key-file#011<filename>#011#011This is the file path which contain secret key of aes encryption while using MySQL password encryption.

Dec  8 14:34:32 sun turnserver[994]: #011#011#011#011#011#011If you want to use in the MySQL connection string the password in encrypted format,

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011then set in this option the file path of the secret key. The key which is used to encrypt MySQL password.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Warning: If this option is set, then MySQL password must be set in "mysql-userdb" option in encrypted format!

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011If you want to use cleartext password then do not set this option!

Dec  8 14:34:33 sun turnserver[994]:  -N, --redis-userdb#011<connection-string>#011Redis user database connection string, if used (default - empty, no Redis DB used).

Dec  8 14:34:33 sun turnserver[994]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:33 sun turnserver[994]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:33 sun turnserver[994]: #011        #011          #011#011"host=<ip-addr> dbname=<db-number> \

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds>".

Dec  8 14:34:33 sun turnserver[994]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:33 sun turnserver[994]:  -O, --redis-statsdb#011<connection-string>#011Redis status and statistics database connection string, if used

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011(default - empty, no Redis stats DB used).

Dec  8 14:34:33 sun turnserver[994]: #011                                #011This database keeps allocations status information, and it can be also used for publishing

Dec  8 14:34:33 sun turnserver[994]: #011#011                                and delivering traffic and allocation event notifications.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011The connection string has the same parameters as redis-userdb connection string.

Dec  8 14:34:33 sun turnserver[994]:  --use-auth-secret#011#011#011#011TURN REST API flag.

Dec  8 14:34:33 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun systemd[1]: Failed to start coTURN STUN/TURN Server.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Flag that sets a special authorization option that is based upon authentication secret

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011(TURN Server REST API, see TURNServerRESTAPI.pdf). This option is used with timestamp.

Dec  8 14:34:33 sun turnserver[994]:  --static-auth-secret#011#011<secret>#011'Static' authentication secret value (a string) for TURN REST API only.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011If not set, then the turn server will try to use the 'dynamic' value

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011in turn_secret table in user database (if present).

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011That database value can be changed on-the-fly

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011by a separate program, so this is why it is 'dynamic'.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Multiple shared secrets can be used (both in the database and in the "static" fashion).

Dec  8 14:34:33 sun turnserver[994]:  --server-name#011#011#011#011#011Server name used for

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011the oAuth authentication purposes.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011The default value is the realm name.

Dec  8 14:34:33 sun turnserver[994]:  --oauth#011#011#011#011#011Support oAuth authentication.

Dec  8 14:34:33 sun turnserver[994]:  -n#011#011#011#011#011#011Do not use configuration file, take all parameters from the command line only.

Dec  8 14:34:33 sun turnserver[994]:  --cert#011#011#011<filename>#011#011Certificate file, PEM format. Same file search rules

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011If both --no-tls and --no_dtls options

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011are specified, then this parameter is not needed.

Dec  8 14:34:33 sun turnserver[994]:  --pkey#011#011#011<filename>#011#011Private key file, PEM format. Same file search rules

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011If both --no-tls and --no-dtls options

Dec  8 14:34:33 sun turnserver[994]:  --pkey-pwd#011#011<password>#011#011If the private key file is encrypted, then this password to be used.

Dec  8 14:34:33 sun turnserver[994]:  --cipher-list#011<"cipher-string">#011#011Allowed OpenSSL cipher list for TLS/DTLS connections.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Default value is "DEFAULT".

Dec  8 14:34:33 sun turnserver[994]:  --CA-file#011#011<filename>#011#011CA file in OpenSSL format.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Forces TURN server to verify the client SSL certificates.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011By default, no CA is set and no client certificate check is performed.

Dec  8 14:34:33 sun turnserver[994]:  --ec-curve-name#011<curve-name>#011#011Curve name for EC ciphers, if supported by OpenSSL

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011library (TLS and DTLS). The default value is prime256v1,

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011if pre-OpenSSL 1.0.2 is used. With OpenSSL 1.0.2+,

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011an optimal curve will be automatically calculated, if not defined

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011by this option.

Dec  8 14:34:33 sun turnserver: 0: Redis supported

Dec  8 14:34:33 sun colord[829]: failed to get session [pid 748]: Aucune donnée disponible

Dec  8 14:34:33 sun turnserver[994]:  --dh566#011#011#011#011#011Use 566 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:33 sun turnserver[994]:  --dh2066#011#011#011#011#011Use 2066 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:33 sun turnserver[994]:  --dh-file#011<dh-file-name>#011#011#011Use custom DH TLS key, stored in PEM format in the file.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Flags --dh566 and --dh2066 are ignored when the DH key is taken from a file.

Dec  8 14:34:33 sun turnserver[994]:  --no-tlsv1#011#011#011#011#011Do not allow TLSv1/DTLSv1 protocol.

Dec  8 14:34:33 sun turnserver[994]:  --no-tlsv1_1#011#011#011#011#011Do not allow TLSv1.1 protocol.

Dec  8 14:34:33 sun turnserver[994]:  --no-tlsv1_2#011#011#011#011#011Do not allow TLSv1.2/DTLSv1.2 protocol.

Dec  8 14:34:33 sun turnserver[994]:  --no-udp#011#011#011#011#011Do not start UDP client listeners.

Dec  8 14:34:33 sun turnserver[994]:  --no-tcp#011#011#011#011#011Do not start TCP client listeners.

Dec  8 14:34:33 sun turnserver[994]:  --no-tls#011#011#011#011#011Do not start TLS client listeners.

Dec  8 14:34:33 sun turnserver[994]:  --no-dtls#011#011#011#011#011Do not start DTLS client listeners.

Dec  8 14:34:33 sun turnserver[994]:  --no-udp-relay#011#011#011#011#011Do not allow UDP relay endpoints, use only TCP relay option.

Dec  8 14:34:33 sun turnserver[994]:  --no-tcp-relay#011#011#011#011#011Do not allow TCP relay endpoints, use only UDP relay options.

Dec  8 14:34:33 sun turnserver[994]:  -l, --log-file#011#011<filename>#011#011Option to set the full path name of the log file.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011By default, the turnserver tries to open a log file in

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011/var/log/turnserver/, /var/log, /var/tmp, /tmp and . (current) directories

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011(which open operation succeeds first that file will be used).

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011With this option you can set the definite log file name.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011The special names are "stdout" and "-" - they will force everything

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011to the stdout; and "syslog" name will force all output to the syslog.

Dec  8 14:34:33 sun turnserver[994]:  --no-stdout-log#011#011#011#011Flag to prevent stdout log messages.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011By default, all log messages are going to both stdout and to

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011a log file. With this option everything will be going to the log file only

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011(unless the log file itself is stdout).

Dec  8 14:34:33 sun turnserver[994]:  --syslog#011#011#011#011#011Output all log information into the system log (syslog), do not use the file output.

Dec  8 14:34:33 sun turnserver[994]:  --simple-log#011#011#011#011#011This flag means that no log file rollover will be used, and the log file

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011name will be constructed as-is, without PID and date appendage.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011This option can be used, for example, together with the logrotate tool.

Dec  8 14:34:33 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver[994]:  --stale-nonce[=<value>]#011#011#011Use extra security with nonce value having limited lifetime (default 600 secs).

Dec  8 14:34:33 sun turnserver[994]:  --max-allocate-lifetime#011<value>#011#011Set the maximum value for the allocation lifetime. Default to 3600 secs.

Dec  8 14:34:33 sun turnserver[994]:  --channel-lifetime#011#011<value>#011#011Set the lifetime for channel binding, default to 600 secs.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011This value MUST not be changed for production purposes.

Dec  8 14:34:33 sun turnserver[994]:  --permission-lifetime#011#011<value>#011#011Set the value for the lifetime of the permission. Default to 300 secs.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011This MUST not be changed for production purposes.

Dec  8 14:34:33 sun turnserver[994]:  -S, --stun-only#011#011#011#011Option to set standalone STUN operation only, all TURN requests will be ignored.

Dec  8 14:34:33 sun turnserver[994]:      --no-stun#011#011#011#011#011Option to suppress STUN functionality, only TURN requests will be processed.

Dec  8 14:34:33 sun turnserver[994]:  --alternate-server#011#011<ip:port>#011Set the TURN server to redirect the allocate requests (UDP and TCP services).

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:33 sun turnserver[994]:  --tls-alternate-server#011<ip:port>#011#011Set the TURN server to redirect the allocate requests (DTLS and TLS services).

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:33 sun turnserver[994]:  -C, --rest-api-separator#011<SYMBOL>#011This is the timestamp/username separator symbol (character) in TURN REST API.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011The default value is ':'.

Dec  8 14:34:33 sun turnserver[994]:  --max-allocate-timeout=<seconds>#011#011Max time, in seconds, allowed for full allocation establishment. Default is 60.

Dec  8 14:34:33 sun turnserver[994]:  --allowed-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are explicitly allowed to connect to the

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011turn server. Multiple allowed-peer-ip can be set.

Dec  8 14:34:33 sun turnserver[994]:  --denied-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are not allowed to connect to the turn server.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Multiple denied-peer-ip can be set.

Dec  8 14:34:33 sun turnserver[994]:  --pidfile <"pid-file-name">#011#011#011File name to store the pid of the process.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Default is /var/run/turnserver.pid (if superuser account is used) or

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011/var/tmp/turnserver.pid .

Dec  8 14:34:33 sun turnserver[994]:  --secure-stun#011#011#011#011#011Require authentication of the STUN Binding request.

Dec  8 14:34:33 sun turnserver: 0: MySQL supported

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011By default, the clients are allowed anonymous access to the STUN Binding functionality.

Dec  8 14:34:33 sun turnserver[994]:  --proc-user <user-name>#011#011#011User name to run the turnserver process.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011will make an attempt to change the current user ID to that user.

Dec  8 14:34:33 sun turnserver[994]:  --proc-group <group-name>#011#011#011Group name to run the turnserver process.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011will make an attempt to change the current group ID to that group.

Dec  8 14:34:33 sun turnserver[994]:  --mobility#011#011#011#011#011Mobility with ICE (MICE) specs support.

Dec  8 14:34:33 sun turnserver[994]:  -K, --keep-address-family#011#011#011TURN server allocates address family according TURN

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011Client <=> Server communication address family.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011!! It breaks RFC6156 section-4.2 (violates default IPv4) !!

Dec  8 14:34:33 sun turnserver[994]:  --no-cli#011#011#011#011#011Turn OFF the CLI support. By default it is always ON.

Dec  8 14:34:33 sun turnserver[994]:  --cli-ip=<IP>#011#011#011#011#011Local system IP address to be used for CLI server endpoint. Default value

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:33 sun turnserver[994]:  --cli-port=<port>#011#011#011#011CLI server port. Default is 5766.

Dec  8 14:34:33 sun turnserver[994]:  --cli-password=<password>#011#011#011CLI access password. Default is empty (no password).

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011For the security reasons, it is recommended to use the encrypted

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011for of the password (see the -P command in the turnadmin utility).

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011The dollar signs in the encrypted form must be escaped.

Dec  8 14:34:33 sun turnserver[994]:  --web-admin#011#011#011#011#011Enable Turn Web-admin support. By default it is disabled.

Dec  8 14:34:33 sun turnserver[994]:  --web-admin-ip=<IP>#011#011#011#011Local system IP address to be used for Web-admin server endpoint. Default value

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:33 sun turnserver[994]:  --web-admin-port=<port>#011#011#011Web-admin server port. Default is 8080.

Dec  8 14:34:33 sun turnserver[994]:  --web-admin-listen-on-workers#011#011#011Enable for web-admin server to listens on STUN/TURN workers STUN/TURN ports.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011By default it is disabled for security resons!

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011(This behavior used to be the default behavior, and was enabled by default.)

Dec  8 14:34:33 sun turnserver[994]:  --server-relay#011#011#011#011#011Server relay. NON-STANDARD AND DANGEROUS OPTION. Only for those applications

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011when we want to run server applications on the relay endpoints.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011This option eliminates the IP permissions check on the packets

Dec  8 14:34:33 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011incoming to the relay endpoints.

Dec  8 14:34:33 sun turnserver[994]:  --cli-max-output-sessions#011#011#011Maximum number of output sessions in ps CLI command.

Dec  8 14:34:33 sun turnserver[994]: #011#011#011#011#011#011This value can be changed on-the-fly in CLI. The default value is 256.

Dec  8 14:34:33 sun turnserver[994]:  --ne=[1|2|3]#011#011#011#011#011Set network engine type for the process (for internal purposes).

Dec  8 14:34:33 sun turnserver[994]:  -h#011#011#011#011#011#011Help

Dec  8 14:34:33 sun turnserver[994]:  For more information, see the wiki pages:

Dec  8 14:34:33 sun turnserver[994]: #011https://github.com/coturn/coturn/wiki/

Dec  8 14:34:33 sun turnserver[994]: 0: log file opened: /var/tmp/turn_994_2020-12-08.log

Dec  8 14:34:33 sun turnserver[994]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 0.0.0.0-0.255.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 10.0.0.0-10.255.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 100.64.0.0-100.127.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 169.254.0.0-169.254.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 172.16.0.0-172.31.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 192.0.0.0-192.0.0.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 192.0.2.0-192.0.2.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 192.88.99.0-192.88.99.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 192.168.0.0-192.168.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 198.18.0.0-198.19.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 198.51.100.0-198.51.100.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 203.0.113.0-203.0.113.255

Dec  8 14:34:33 sun turnserver[994]: 0: Black listing: 240.0.0.0-255.255.255.255

Dec  8 14:34:33 sun turnserver[994]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver[994]: 0:

Dec  8 14:34:33 sun turnserver[994]: RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server

Dec  8 14:34:33 sun turnserver[994]: Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:33 sun turnserver[994]: 0:

Dec  8 14:34:33 sun turnserver[994]: Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:33 sun turnserver[994]: 0:

Dec  8 14:34:33 sun turnserver[994]: Due to the open files/sockets limitation,

Dec  8 14:34:33 sun turnserver[994]: max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:33 sun turnserver[994]: 0:

Dec  8 14:34:33 sun turnserver[994]: ==== Show him the instruments, Practical Frost: ====

Dec  8 14:34:33 sun turnserver[994]: 0: TLS supported

Dec  8 14:34:33 sun turnserver[994]: 0: DTLS supported

Dec  8 14:34:33 sun turnserver[994]: 0: DTLS 1.2 supported

Dec  8 14:34:33 sun turnserver[994]: 0: TURN/STUN ALPN supported

Dec  8 14:34:33 sun turnserver[994]: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:33 sun turnserver[994]: 0: GCM (AEAD) supported

Dec  8 14:34:33 sun turnserver[994]: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:33 sun turnserver[994]: 0:

Dec  8 14:34:33 sun turnserver[994]: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun turnserver[994]: 0: Redis supported

Dec  8 14:34:33 sun turnserver[994]: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver[994]: 0: MySQL supported

Dec  8 14:34:33 sun turnserver[994]: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver[994]: 0:

Dec  8 14:34:33 sun turnserver[994]: 0: Default Net Engine version: 3 (UDP thread per CPU core)

Dec  8 14:34:33 sun turnserver[994]: =====================================================

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver[994]: 0: Domain name:

Dec  8 14:34:33 sun turnserver[994]: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver[994]: 0:

Dec  8 14:34:33 sun turnserver[994]: CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver[994]: 0: ERROR:

Dec  8 14:34:33 sun turnserver[994]: CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:33 sun turnserver[994]: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver[994]: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver[994]: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver[994]: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver[994]: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver[994]: 0: Listener address to use: ::1

Dec  8 14:34:33 sun turnserver[994]: 0: ERROR: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:33 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:33 sun turnserver: 0: Domain name: 

Dec  8 14:34:33 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:33 sun turnserver: 0: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:33 sun systemd[1]: coturn.service: Service RestartSec=100ms expired, scheduling restart.

Dec  8 14:34:33 sun systemd[1]: coturn.service: Scheduled restart job, restart counter is at 3.

Dec  8 14:34:33 sun systemd[1]: Stopped coTURN STUN/TURN Server.

Dec  8 14:34:33 sun systemd[1]: Starting coTURN STUN/TURN Server...

Dec  8 14:34:33 sun NetworkManager[741]: <info>  [1607434473.1325] modem-manager: ModemManager available

Dec  8 14:34:33 sun NetworkManager[741]: <info>  [1607434473.1326] supplicant: wpa_supplicant running

Dec  8 14:34:33 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:33 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:33 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:33 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:33 sun turnserver: 0: TLS supported

Dec  8 14:34:33 sun turnserver: 0: DTLS supported

Dec  8 14:34:33 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:33 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:33 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:33 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:33 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun turnserver: 0: Redis supported

Dec  8 14:34:33 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver: 0: MySQL supported

Dec  8 14:34:33 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:33 sun turnserver: 0: Domain name: 

Dec  8 14:34:33 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:33 sun turnserver: 0: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:33 sun turnserver[1017]: Usage: turnserver [options]

Dec  8 14:34:33 sun turnserver[1017]: Options:

Dec  8 14:34:33 sun turnserver[1017]:  -d, --listening-device#011<device-name>#011#011Listener interface device (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:33 sun turnserver[1017]:  -p, --listening-port#011#011<port>#011#011TURN listener port (Default: 3478).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Note: actually, TLS & DTLS sessions can connect to the "plain" TCP & UDP port(s), too,

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011if allowed by configuration.

Dec  8 14:34:33 sun turnserver[1017]:  --tls-listening-port#011#011<port>#011#011TURN listener port for TLS & DTLS listeners

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(Default: 5349).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Note: actually, "plain" TCP & UDP sessions can connect to the TLS & DTLS port(s), too,

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011if allowed by configuration. The TURN server

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011"automatically" recognizes the type of traffic. Actually, two listening

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011endpoints (the "plain" one and the "tls" one) are equivalent in terms of

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011functionality; but we keep both endpoints to satisfy the RFC 5766 specs.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011For secure TCP connections, we currently support SSL version 3 and

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011TLS versions 1.0, 1.1 and 1.2. For secure UDP connections, we support

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011DTLS version 1.

Dec  8 14:34:33 sun turnserver[1017]:  --alt-listening-port<port>#011<port>#011#011Alternative listening port for STUN CHANGE_REQUEST (in RFC 5780 sense,

Dec  8 14:34:33 sun turnserver[1017]:                                                 or in old RFC 3489 sense, default is "listening port plus one").

Dec  8 14:34:33 sun turnserver[1017]:  --alt-tls-listening-port#011<port>#011#011Alternative listening port for TLS and DTLS,

Dec  8 14:34:33 sun turnserver[1017]:  #011#011#011#011#011#011the default is "TLS/DTLS port plus one".

Dec  8 14:34:33 sun turnserver[1017]:  -L, --listening-ip#011#011<ip>#011#011Listener IP address of relay server. Multiple listeners can be specified.

Dec  8 14:34:33 sun turnserver[1017]:  --aux-server#011#011#011<ip:port>#011Auxiliary STUN/TURN server listening endpoint.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Auxiliary servers do not have alternative ports and

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011they do not support RFC 5780 functionality (CHANGE REQUEST).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Valid formats are 1.2.3.4:5555 for IPv4 and [1:2::3:4]:5555 for IPv6.

Dec  8 14:34:33 sun turnserver[1017]:  --udp-self-balance#011#011#011#011(recommended for older Linuxes only) Automatically balance UDP traffic

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011over auxiliary servers (if configured).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The load balancing is using the ALTERNATE-SERVER mechanism.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The TURN client must support 300 ALTERNATE-SERVER response for this functionality.

Dec  8 14:34:33 sun turnserver[1017]:  -i, --relay-device#011#011<device-name>#011Relay interface device for relay sockets (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:33 sun turnserver[1017]:  -E, --relay-ip#011#011<ip>#011#011#011Relay address (the local IP address that will be used to relay the

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011packets to the peer).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Multiple relay addresses may be used.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The same IP(s) can be used as both listening IP(s) and relay IP(s).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011If no relay IP(s) specified, then the turnserver will apply the default

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011policy: it will decide itself which relay addresses to be used, and it

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011will always be using the client socket IP address as the relay IP address

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011of the TURN session (if the requested relay address family is the same

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011as the family of the client socket).

Dec  8 14:34:33 sun turnserver[1017]:  -X, --external-ip  <public-ip[/private-ip]>#011TURN Server public/private address mapping, if the server is behind NAT.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011In that situation, if a -X is used in form "-X ip" then that ip will be reported

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011as relay IP address of all allocations. This scenario works only in a simple case

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011when one single relay address is be used, and no STUN CHANGE_REQUEST

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011functionality is required.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011That single relay address must be mapped by NAT to the 'external' IP.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011For that 'external' IP, NAT must forward ports directly (relayed port 12345

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011must be always mapped to the same 'external' port 12345).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011In more complex case when more than one IP address is involved,

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011that option must be used several times in the command line, each entry must

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011have form "-X public-ip/private-ip", to map all involved addresses.

Dec  8 14:34:33 sun turnserver[1017]:  --allow-loopback-peers#011#011#011#011Allow peers on the loopback addresses (127.x.x.x and ::1).

Dec  8 14:34:33 sun turnserver[1017]:  --no-multicast-peers#011#011#011#011Disallow peers on well-known broadcast addresses (224.0.0.0 and above, and FFXX:*).

Dec  8 14:34:33 sun turnserver[1017]:  -m, --relay-threads#011#011<number>#011Number of relay threads to handle the established connections

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(in addition to authentication thread and the listener thread).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011If explicitly set to 0 then application runs in single-threaded mode.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011If not set then a default OS-dependent optimal algorithm will be employed.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The default thread number is the number of CPUs.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011In older systems (pre-Linux 3.9) the number of UDP relay threads always equals

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011the number of listening endpoints (unless -m 0 is set).

Dec  8 14:34:33 sun turnserver[1017]:  --min-port#011#011#011<port>#011#011Lower bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Default value is 49152, according to RFC 5766.

Dec  8 14:34:33 sun turnserver[1017]:  --max-port#011#011#011<port>#011#011Upper bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Default value is 65535, according to RFC 5766.

Dec  8 14:34:33 sun turnserver[1017]:  -v, --verbose#011#011#011#011#011'Moderate' verbose mode.

Dec  8 14:34:33 sun turnserver[1017]:  -V, --Verbose#011#011#011#011#011Extra verbose mode, very annoying (for debug purposes only).

Dec  8 14:34:33 sun turnserver[1017]:  -o, --daemon#011#011#011#011#011Start process as daemon (detach from current shell).

Dec  8 14:34:33 sun turnserver[1017]:  --prod       #011 #011#011#011#011Production mode: hide the software version.

Dec  8 14:34:33 sun turnserver[1017]:  -f, --fingerprint#011#011#011#011Use fingerprints in the TURN messages.

Dec  8 14:34:33 sun turnserver[1017]:  -a, --lt-cred-mech#011#011#011#011Use the long-term credential mechanism.

Dec  8 14:34:33 sun turnserver[1017]:  -z, --no-auth#011#011#011#011#011Do not use any credential mechanism, allow anonymous access.

Dec  8 14:34:33 sun turnserver[1017]:  -u, --user#011#011#011<user:pwd>#011User account, in form 'username:password', for long-term credentials.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Cannot be used with TURN REST API.

Dec  8 14:34:33 sun turnserver[1017]:  -r, --realm#011#011#011<realm>#011#011The default realm to be used for the users when no explicit

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011origin/realm relationship was found in the database.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Must be used with long-term credentials

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011mechanism or with TURN REST API.

Dec  8 14:34:33 sun turnserver[1017]:  --check-origin-consistency#011#011#011The flag that sets the origin consistency check:

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011across the session, all requests must have the same

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011main ORIGIN attribute value (if the ORIGIN was

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011initially used by the session).

Dec  8 14:34:33 sun turnserver[1017]:  -q, --user-quota#011#011<number>#011Per-user allocation quota: how many concurrent allocations a user can create.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:33 sun turnserver[1017]:  -Q, --total-quota#011#011<number>#011Total allocations quota: global limit on concurrent allocations.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:33 sun turnserver[1017]:  -s, --max-bps#011#011#011<number>#011Default max bytes-per-second bandwidth a TURN session is allowed to handle

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(input and output network streams are treated separately). Anything above

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011that limit will be dropped or temporary suppressed

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(within the available buffer limits).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:33 sun turnserver[1017]:  -B, --bps-capacity#011#011<number>#011Maximum server capacity.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Total bytes-per-second bandwidth the TURN server is allowed to allocate

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011for the sessions, combined (input and output network streams are treated separately).

Dec  8 14:34:33 sun turnserver[1017]:  -c#011#011#011#011<filename>#011Configuration file name (default - turnserver.conf).

Dec  8 14:34:33 sun turnserver[1017]:  -b, , --db, --userdb#011<filename>#011#011SQLite database file name; default - /var/db/turndb or

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011    /usr/local/var/db/turndb or /var/lib/turn/turndb.

Dec  8 14:34:33 sun turnserver[1017]:  -e, --psql-userdb, --sql-userdb <conn-string>#011PostgreSQL database connection string, if used (default - empty, no PostreSQL DB used).

Dec  8 14:34:33 sun turnserver[1017]: #011#011                                This database can be used for long-term credentials mechanism users,

Dec  8 14:34:33 sun turnserver[1017]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011See http://www.postgresql.org/docs/8.4/static/libpq-connect.html for 8.x PostgreSQL

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011versions format, see

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011for 9.x and newer connection string formats.

Dec  8 14:34:33 sun turnserver[1017]:  -M, --mysql-userdb#011<connection-string>#011MySQL database connection string, if used (default - empty, no MySQL DB used).

Dec  8 14:34:33 sun turnserver[1017]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:33 sun turnserver[1017]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:33 sun turnserver[1017]: #011        #011          #011#011"host=<ip-addr> dbname=<database-name> user=<database-user> \

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds> read_timeout=<seconds>".

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The connection string parameters for the secure communications (SSL):

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011ca, capath, cert, key, cipher

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(see http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html for the

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011command options description).

Dec  8 14:34:33 sun turnserver[1017]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:33 sun turnserver[1017]:  --secret-key-file#011<filename>#011#011This is the file path which contain secret key of aes encryption while using MySQL password encryption.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011If you want to use in the MySQL connection string the password in encrypted format,

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011then set in this option the file path of the secret key. The key which is used to encrypt MySQL password.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Warning: If this option is set, then MySQL password must be set in "mysql-userdb" option in encrypted format!

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011If you want to use cleartext password then do not set this option!

Dec  8 14:34:33 sun turnserver[1017]:  -N, --redis-userdb#011<connection-string>#011Redis user database connection string, if used (default - empty, no Redis DB used).

Dec  8 14:34:33 sun turnserver[1017]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:33 sun turnserver[1017]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:33 sun turnserver[1017]: #011        #011          #011#011"host=<ip-addr> dbname=<db-number> \

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds>".

Dec  8 14:34:33 sun turnserver[1017]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:33 sun turnserver[1017]:  -O, --redis-statsdb#011<connection-string>#011Redis status and statistics database connection string, if used

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(default - empty, no Redis stats DB used).

Dec  8 14:34:33 sun turnserver[1017]: #011                                #011This database keeps allocations status information, and it can be also used for publishing

Dec  8 14:34:33 sun turnserver[1017]: #011#011                                and delivering traffic and allocation event notifications.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The connection string has the same parameters as redis-userdb connection string.

Dec  8 14:34:33 sun turnserver[1017]:  --use-auth-secret#011#011#011#011TURN REST API flag.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Flag that sets a special authorization option that is based upon authentication secret

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(TURN Server REST API, see TURNServerRESTAPI.pdf). This option is used with timestamp.

Dec  8 14:34:33 sun turnserver[1017]:  --static-auth-secret#011#011<secret>#011'Static' authentication secret value (a string) for TURN REST API only.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011If not set, then the turn server will try to use the 'dynamic' value

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011in turn_secret table in user database (if present).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011That database value can be changed on-the-fly

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011by a separate program, so this is why it is 'dynamic'.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Multiple shared secrets can be used (both in the database and in the "static" fashion).

Dec  8 14:34:33 sun turnserver[1017]:  --server-name#011#011#011#011#011Server name used for

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011the oAuth authentication purposes.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The default value is the realm name.

Dec  8 14:34:33 sun turnserver[1017]:  --oauth#011#011#011#011#011Support oAuth authentication.

Dec  8 14:34:33 sun turnserver[1017]:  -n#011#011#011#011#011#011Do not use configuration file, take all parameters from the command line only.

Dec  8 14:34:33 sun turnserver[1017]:  --cert#011#011#011<filename>#011#011Certificate file, PEM format. Same file search rules

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011If both --no-tls and --no_dtls options

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011are specified, then this parameter is not needed.

Dec  8 14:34:33 sun turnserver[1017]:  --pkey#011#011#011<filename>#011#011Private key file, PEM format. Same file search rules

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011If both --no-tls and --no-dtls options

Dec  8 14:34:33 sun turnserver[1017]:  --pkey-pwd#011#011<password>#011#011If the private key file is encrypted, then this password to be used.

Dec  8 14:34:33 sun turnserver[1017]:  --cipher-list#011<"cipher-string">#011#011Allowed OpenSSL cipher list for TLS/DTLS connections.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Default value is "DEFAULT".

Dec  8 14:34:33 sun turnserver[1017]:  --CA-file#011#011<filename>#011#011CA file in OpenSSL format.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Forces TURN server to verify the client SSL certificates.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011By default, no CA is set and no client certificate check is performed.

Dec  8 14:34:33 sun turnserver[1017]:  --ec-curve-name#011<curve-name>#011#011Curve name for EC ciphers, if supported by OpenSSL

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011library (TLS and DTLS). The default value is prime256v1,

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011if pre-OpenSSL 1.0.2 is used. With OpenSSL 1.0.2+,

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011an optimal curve will be automatically calculated, if not defined

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011by this option.

Dec  8 14:34:33 sun turnserver[1017]:  --dh566#011#011#011#011#011Use 566 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:33 sun turnserver[1017]:  --dh2066#011#011#011#011#011Use 2066 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:33 sun turnserver[1017]:  --dh-file#011<dh-file-name>#011#011#011Use custom DH TLS key, stored in PEM format in the file.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Flags --dh566 and --dh2066 are ignored when the DH key is taken from a file.

Dec  8 14:34:33 sun turnserver[1017]:  --no-tlsv1#011#011#011#011#011Do not allow TLSv1/DTLSv1 protocol.

Dec  8 14:34:33 sun turnserver[1017]:  --no-tlsv1_1#011#011#011#011#011Do not allow TLSv1.1 protocol.

Dec  8 14:34:33 sun turnserver[1017]:  --no-tlsv1_2#011#011#011#011#011Do not allow TLSv1.2/DTLSv1.2 protocol.

Dec  8 14:34:33 sun turnserver[1017]:  --no-udp#011#011#011#011#011Do not start UDP client listeners.

Dec  8 14:34:33 sun turnserver[1017]:  --no-tcp#011#011#011#011#011Do not start TCP client listeners.

Dec  8 14:34:33 sun turnserver[1017]:  --no-tls#011#011#011#011#011Do not start TLS client listeners.

Dec  8 14:34:33 sun turnserver[1017]:  --no-dtls#011#011#011#011#011Do not start DTLS client listeners.

Dec  8 14:34:33 sun turnserver[1017]:  --no-udp-relay#011#011#011#011#011Do not allow UDP relay endpoints, use only TCP relay option.

Dec  8 14:34:33 sun turnserver[1017]:  --no-tcp-relay#011#011#011#011#011Do not allow TCP relay endpoints, use only UDP relay options.

Dec  8 14:34:33 sun turnserver[1017]:  -l, --log-file#011#011<filename>#011#011Option to set the full path name of the log file.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011By default, the turnserver tries to open a log file in

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011/var/log/turnserver/, /var/log, /var/tmp, /tmp and . (current) directories

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(which open operation succeeds first that file will be used).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011With this option you can set the definite log file name.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The special names are "stdout" and "-" - they will force everything

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011to the stdout; and "syslog" name will force all output to the syslog.

Dec  8 14:34:33 sun turnserver[1017]:  --no-stdout-log#011#011#011#011Flag to prevent stdout log messages.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011By default, all log messages are going to both stdout and to

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011a log file. With this option everything will be going to the log file only

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(unless the log file itself is stdout).

Dec  8 14:34:33 sun turnserver[1017]:  --syslog#011#011#011#011#011Output all log information into the system log (syslog), do not use the file output.

Dec  8 14:34:33 sun turnserver[1017]:  --simple-log#011#011#011#011#011This flag means that no log file rollover will be used, and the log file

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011name will be constructed as-is, without PID and date appendage.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011This option can be used, for example, together with the logrotate tool.

Dec  8 14:34:33 sun turnserver[1017]:  --stale-nonce[=<value>]#011#011#011Use extra security with nonce value having limited lifetime (default 600 secs).

Dec  8 14:34:33 sun turnserver[1017]:  --max-allocate-lifetime#011<value>#011#011Set the maximum value for the allocation lifetime. Default to 3600 secs.

Dec  8 14:34:33 sun turnserver[1017]:  --channel-lifetime#011#011<value>#011#011Set the lifetime for channel binding, default to 600 secs.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011This value MUST not be changed for production purposes.

Dec  8 14:34:33 sun turnserver[1017]:  --permission-lifetime#011#011<value>#011#011Set the value for the lifetime of the permission. Default to 300 secs.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011This MUST not be changed for production purposes.

Dec  8 14:34:33 sun turnserver[1017]:  -S, --stun-only#011#011#011#011Option to set standalone STUN operation only, all TURN requests will be ignored.

Dec  8 14:34:33 sun turnserver[1017]:      --no-stun#011#011#011#011#011Option to suppress STUN functionality, only TURN requests will be processed.

Dec  8 14:34:33 sun turnserver[1017]:  --alternate-server#011#011<ip:port>#011Set the TURN server to redirect the allocate requests (UDP and TCP services).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:33 sun turnserver[1017]:  --tls-alternate-server#011<ip:port>#011#011Set the TURN server to redirect the allocate requests (DTLS and TLS services).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:33 sun turnserver[1017]:  -C, --rest-api-separator#011<SYMBOL>#011This is the timestamp/username separator symbol (character) in TURN REST API.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The default value is ':'.

Dec  8 14:34:33 sun turnserver[1017]:  --max-allocate-timeout=<seconds>#011#011Max time, in seconds, allowed for full allocation establishment. Default is 60.

Dec  8 14:34:33 sun turnserver[1017]:  --allowed-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are explicitly allowed to connect to the

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011turn server. Multiple allowed-peer-ip can be set.

Dec  8 14:34:33 sun turnserver[1017]:  --denied-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are not allowed to connect to the turn server.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Multiple denied-peer-ip can be set.

Dec  8 14:34:33 sun turnserver[1017]:  --pidfile <"pid-file-name">#011#011#011File name to store the pid of the process.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Default is /var/run/turnserver.pid (if superuser account is used) or

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011/var/tmp/turnserver.pid .

Dec  8 14:34:33 sun turnserver[1017]:  --secure-stun#011#011#011#011#011Require authentication of the STUN Binding request.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011By default, the clients are allowed anonymous access to the STUN Binding functionality.

Dec  8 14:34:33 sun turnserver[1017]:  --proc-user <user-name>#011#011#011User name to run the turnserver process.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011will make an attempt to change the current user ID to that user.

Dec  8 14:34:33 sun turnserver[1017]:  --proc-group <group-name>#011#011#011Group name to run the turnserver process.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011will make an attempt to change the current group ID to that group.

Dec  8 14:34:33 sun turnserver[1017]:  --mobility#011#011#011#011#011Mobility with ICE (MICE) specs support.

Dec  8 14:34:33 sun turnserver[1017]:  -K, --keep-address-family#011#011#011TURN server allocates address family according TURN

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011Client <=> Server communication address family.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011!! It breaks RFC6156 section-4.2 (violates default IPv4) !!

Dec  8 14:34:33 sun turnserver[1017]:  --no-cli#011#011#011#011#011Turn OFF the CLI support. By default it is always ON.

Dec  8 14:34:33 sun turnserver[1017]:  --cli-ip=<IP>#011#011#011#011#011Local system IP address to be used for CLI server endpoint. Default value

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:33 sun turnserver[1017]:  --cli-port=<port>#011#011#011#011CLI server port. Default is 5766.

Dec  8 14:34:33 sun turnserver[1017]:  --cli-password=<password>#011#011#011CLI access password. Default is empty (no password).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011For the security reasons, it is recommended to use the encrypted

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011for of the password (see the -P command in the turnadmin utility).

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011The dollar signs in the encrypted form must be escaped.

Dec  8 14:34:33 sun turnserver[1017]:  --web-admin#011#011#011#011#011Enable Turn Web-admin support. By default it is disabled.

Dec  8 14:34:33 sun turnserver[1017]:  --web-admin-ip=<IP>#011#011#011#011Local system IP address to be used for Web-admin server endpoint. Default value

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:33 sun turnserver[1017]:  --web-admin-port=<port>#011#011#011Web-admin server port. Default is 8080.

Dec  8 14:34:33 sun turnserver[1017]:  --web-admin-listen-on-workers#011#011#011Enable for web-admin server to listens on STUN/TURN workers STUN/TURN ports.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011By default it is disabled for security resons!

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011(This behavior used to be the default behavior, and was enabled by default.)

Dec  8 14:34:33 sun turnserver[1017]:  --server-relay#011#011#011#011#011Server relay. NON-STANDARD AND DANGEROUS OPTION. Only for those applications

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011when we want to run server applications on the relay endpoints.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011This option eliminates the IP permissions check on the packets

Dec  8 14:34:33 sun systemd[1]: coturn.service: Control process exited, code=exited, status=255/EXCEPTION

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011incoming to the relay endpoints.

Dec  8 14:34:33 sun turnserver[1017]:  --cli-max-output-sessions#011#011#011Maximum number of output sessions in ps CLI command.

Dec  8 14:34:33 sun turnserver[1017]: #011#011#011#011#011#011This value can be changed on-the-fly in CLI. The default value is 256.

Dec  8 14:34:33 sun turnserver[1017]:  --ne=[1|2|3]#011#011#011#011#011Set network engine type for the process (for internal purposes).

Dec  8 14:34:33 sun turnserver[1017]:  -h#011#011#011#011#011#011Help

Dec  8 14:34:33 sun turnserver[1017]:  For more information, see the wiki pages:

Dec  8 14:34:33 sun turnserver[1017]: #011https://github.com/coturn/coturn/wiki/

Dec  8 14:34:33 sun turnserver[1017]: 0: log file opened: /var/tmp/turn_1017_2020-12-08.log

Dec  8 14:34:33 sun turnserver[1017]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 0.0.0.0-0.255.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 10.0.0.0-10.255.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 100.64.0.0-100.127.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 169.254.0.0-169.254.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 172.16.0.0-172.31.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 192.0.0.0-192.0.0.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 192.0.2.0-192.0.2.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 192.88.99.0-192.88.99.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 192.168.0.0-192.168.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 198.18.0.0-198.19.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 198.51.100.0-198.51.100.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 203.0.113.0-203.0.113.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Black listing: 240.0.0.0-255.255.255.255

Dec  8 14:34:33 sun turnserver[1017]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver[1017]: 0:

Dec  8 14:34:33 sun turnserver[1017]: RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server

Dec  8 14:34:33 sun turnserver[1017]: Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:33 sun turnserver[1017]: 0:

Dec  8 14:34:33 sun turnserver[1017]: Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:33 sun turnserver[1017]: 0:

Dec  8 14:34:33 sun turnserver[1017]: Due to the open files/sockets limitation,

Dec  8 14:34:33 sun turnserver[1017]: max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:33 sun turnserver[1017]: 0:

Dec  8 14:34:33 sun turnserver[1017]: ==== Show him the instruments, Practical Frost: ====

Dec  8 14:34:33 sun turnserver[1017]: 0: TLS supported

Dec  8 14:34:33 sun turnserver[1017]: 0: DTLS supported

Dec  8 14:34:33 sun turnserver[1017]: 0: DTLS 1.2 supported

Dec  8 14:34:33 sun turnserver[1017]: 0: TURN/STUN ALPN supported

Dec  8 14:34:33 sun turnserver[1017]: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:33 sun turnserver[1017]: 0: GCM (AEAD) supported

Dec  8 14:34:33 sun turnserver[1017]: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:33 sun turnserver[1017]: 0:

Dec  8 14:34:33 sun turnserver[1017]: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun turnserver[1017]: 0: Redis supported

Dec  8 14:34:33 sun turnserver[1017]: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver[1017]: 0: MySQL supported

Dec  8 14:34:33 sun turnserver[1017]: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver[1017]: 0:

Dec  8 14:34:33 sun turnserver[1017]: 0: Default Net Engine version: 3 (UDP thread per CPU core)

Dec  8 14:34:33 sun turnserver[1017]: =====================================================

Dec  8 14:34:33 sun systemd[1]: coturn.service: Failed with result 'exit-code'.

Dec  8 14:34:33 sun turnserver[1017]: 0: Domain name:

Dec  8 14:34:33 sun turnserver[1017]: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver[1017]: 0:

Dec  8 14:34:33 sun turnserver[1017]: CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver[1017]: 0: ERROR:

Dec  8 14:34:33 sun turnserver[1017]: CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:33 sun turnserver[1017]: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver[1017]: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver[1017]: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver[1017]: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver[1017]: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver[1017]: 0: Listener address to use: ::1

Dec  8 14:34:33 sun turnserver[1017]: 0: ERROR: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:33 sun systemd[1]: Failed to start coTURN STUN/TURN Server.

Dec  8 14:34:33 sun Tor[929]: Parsing GEOIP IPv6 file /usr/share/tor/geoip6.

Dec  8 14:34:33 sun systemd[1]: coturn.service: Service RestartSec=100ms expired, scheduling restart.

Dec  8 14:34:33 sun systemd[1]: coturn.service: Scheduled restart job, restart counter is at 4.

Dec  8 14:34:33 sun systemd[1]: Stopped coTURN STUN/TURN Server.

Dec  8 14:34:33 sun systemd[1]: Starting coTURN STUN/TURN Server...

Dec  8 14:34:33 sun turnserver: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver: 0: #012RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server#012Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:33 sun turnserver: 0: #012Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:33 sun turnserver: 0: #012Due to the open files/sockets limitation,#012max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:33 sun turnserver: 0: #012#012==== Show him the instruments, Practical Frost: ====#012

Dec  8 14:34:33 sun turnserver: 0: TLS supported

Dec  8 14:34:33 sun turnserver: 0: DTLS supported

Dec  8 14:34:33 sun turnserver: 0: DTLS 1.2 supported

Dec  8 14:34:33 sun turnserver: 0: TURN/STUN ALPN supported

Dec  8 14:34:33 sun turnserver: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:33 sun turnserver: 0: GCM (AEAD) supported

Dec  8 14:34:33 sun turnserver: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun turnserver: 0: Redis supported

Dec  8 14:34:33 sun turnserver: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver: 0: MySQL supported

Dec  8 14:34:33 sun turnserver: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver: 0: 

Dec  8 14:34:33 sun turnserver: 0: Default Net Engine version: 3 (UDP thread per CPU core)#012#012=====================================================#012

Dec  8 14:34:33 sun turnserver: 0: Domain name: 

Dec  8 14:34:33 sun turnserver: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver: 0: #012CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver[1020]: Usage: turnserver [options]

Dec  8 14:34:33 sun turnserver[1020]: Options:

Dec  8 14:34:33 sun turnserver[1020]:  -d, --listening-device#011<device-name>#011#011Listener interface device (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:33 sun turnserver[1020]:  -p, --listening-port#011#011<port>#011#011TURN listener port (Default: 3478).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Note: actually, TLS & DTLS sessions can connect to the "plain" TCP & UDP port(s), too,

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011if allowed by configuration.

Dec  8 14:34:33 sun turnserver[1020]:  --tls-listening-port#011#011<port>#011#011TURN listener port for TLS & DTLS listeners

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(Default: 5349).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Note: actually, "plain" TCP & UDP sessions can connect to the TLS & DTLS port(s), too,

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011if allowed by configuration. The TURN server

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011"automatically" recognizes the type of traffic. Actually, two listening

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011endpoints (the "plain" one and the "tls" one) are equivalent in terms of

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011functionality; but we keep both endpoints to satisfy the RFC 5766 specs.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011For secure TCP connections, we currently support SSL version 3 and

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011TLS versions 1.0, 1.1 and 1.2. For secure UDP connections, we support

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011DTLS version 1.

Dec  8 14:34:33 sun turnserver[1020]:  --alt-listening-port<port>#011<port>#011#011Alternative listening port for STUN CHANGE_REQUEST (in RFC 5780 sense,

Dec  8 14:34:33 sun turnserver[1020]:                                                 or in old RFC 3489 sense, default is "listening port plus one").

Dec  8 14:34:33 sun turnserver[1020]:  --alt-tls-listening-port#011<port>#011#011Alternative listening port for TLS and DTLS,

Dec  8 14:34:33 sun turnserver[1020]:  #011#011#011#011#011#011the default is "TLS/DTLS port plus one".

Dec  8 14:34:33 sun turnserver[1020]:  -L, --listening-ip#011#011<ip>#011#011Listener IP address of relay server. Multiple listeners can be specified.

Dec  8 14:34:33 sun turnserver[1020]:  --aux-server#011#011#011<ip:port>#011Auxiliary STUN/TURN server listening endpoint.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Auxiliary servers do not have alternative ports and

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011they do not support RFC 5780 functionality (CHANGE REQUEST).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Valid formats are 1.2.3.4:5555 for IPv4 and [1:2::3:4]:5555 for IPv6.

Dec  8 14:34:33 sun turnserver[1020]:  --udp-self-balance#011#011#011#011(recommended for older Linuxes only) Automatically balance UDP traffic

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011over auxiliary servers (if configured).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The load balancing is using the ALTERNATE-SERVER mechanism.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The TURN client must support 300 ALTERNATE-SERVER response for this functionality.

Dec  8 14:34:33 sun turnserver: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver[1020]:  -i, --relay-device#011#011<device-name>#011Relay interface device for relay sockets (NOT RECOMMENDED. Optional, Linux only).

Dec  8 14:34:33 sun turnserver[1020]:  -E, --relay-ip#011#011<ip>#011#011#011Relay address (the local IP address that will be used to relay the

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011packets to the peer).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Multiple relay addresses may be used.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The same IP(s) can be used as both listening IP(s) and relay IP(s).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011If no relay IP(s) specified, then the turnserver will apply the default

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011policy: it will decide itself which relay addresses to be used, and it

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011will always be using the client socket IP address as the relay IP address

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011of the TURN session (if the requested relay address family is the same

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011as the family of the client socket).

Dec  8 14:34:33 sun turnserver[1020]:  -X, --external-ip  <public-ip[/private-ip]>#011TURN Server public/private address mapping, if the server is behind NAT.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011In that situation, if a -X is used in form "-X ip" then that ip will be reported

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011as relay IP address of all allocations. This scenario works only in a simple case

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011when one single relay address is be used, and no STUN CHANGE_REQUEST

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011functionality is required.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011That single relay address must be mapped by NAT to the 'external' IP.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011For that 'external' IP, NAT must forward ports directly (relayed port 12345

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011must be always mapped to the same 'external' port 12345).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011In more complex case when more than one IP address is involved,

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011that option must be used several times in the command line, each entry must

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011have form "-X public-ip/private-ip", to map all involved addresses.

Dec  8 14:34:33 sun turnserver[1020]:  --allow-loopback-peers#011#011#011#011Allow peers on the loopback addresses (127.x.x.x and ::1).

Dec  8 14:34:33 sun turnserver[1020]:  --no-multicast-peers#011#011#011#011Disallow peers on well-known broadcast addresses (224.0.0.0 and above, and FFXX:*).

Dec  8 14:34:33 sun turnserver[1020]:  -m, --relay-threads#011#011<number>#011Number of relay threads to handle the established connections

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(in addition to authentication thread and the listener thread).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011If explicitly set to 0 then application runs in single-threaded mode.

Dec  8 14:34:33 sun turnserver: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011If not set then a default OS-dependent optimal algorithm will be employed.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The default thread number is the number of CPUs.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011In older systems (pre-Linux 3.9) the number of UDP relay threads always equals

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011the number of listening endpoints (unless -m 0 is set).

Dec  8 14:34:33 sun turnserver[1020]:  --min-port#011#011#011<port>#011#011Lower bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Default value is 49152, according to RFC 5766.

Dec  8 14:34:33 sun turnserver[1020]:  --max-port#011#011#011<port>#011#011Upper bound of the UDP port range for relay endpoints allocation.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Default value is 65535, according to RFC 5766.

Dec  8 14:34:33 sun turnserver[1020]:  -v, --verbose#011#011#011#011#011'Moderate' verbose mode.

Dec  8 14:34:33 sun turnserver[1020]:  -V, --Verbose#011#011#011#011#011Extra verbose mode, very annoying (for debug purposes only).

Dec  8 14:34:33 sun turnserver[1020]:  -o, --daemon#011#011#011#011#011Start process as daemon (detach from current shell).

Dec  8 14:34:33 sun turnserver[1020]:  --prod       #011 #011#011#011#011Production mode: hide the software version.

Dec  8 14:34:33 sun turnserver[1020]:  -f, --fingerprint#011#011#011#011Use fingerprints in the TURN messages.

Dec  8 14:34:33 sun turnserver[1020]:  -a, --lt-cred-mech#011#011#011#011Use the long-term credential mechanism.

Dec  8 14:34:33 sun turnserver[1020]:  -z, --no-auth#011#011#011#011#011Do not use any credential mechanism, allow anonymous access.

Dec  8 14:34:33 sun turnserver[1020]:  -u, --user#011#011#011<user:pwd>#011User account, in form 'username:password', for long-term credentials.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Cannot be used with TURN REST API.

Dec  8 14:34:33 sun turnserver[1020]:  -r, --realm#011#011#011<realm>#011#011The default realm to be used for the users when no explicit

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011origin/realm relationship was found in the database.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Must be used with long-term credentials

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011mechanism or with TURN REST API.

Dec  8 14:34:33 sun turnserver[1020]:  --check-origin-consistency#011#011#011The flag that sets the origin consistency check:

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011across the session, all requests must have the same

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011main ORIGIN attribute value (if the ORIGIN was

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011initially used by the session).

Dec  8 14:34:33 sun turnserver[1020]:  -q, --user-quota#011#011<number>#011Per-user allocation quota: how many concurrent allocations a user can create.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:33 sun turnserver[1020]:  -Q, --total-quota#011#011<number>#011Total allocations quota: global limit on concurrent allocations.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver[1020]:  -s, --max-bps#011#011#011<number>#011Default max bytes-per-second bandwidth a TURN session is allowed to handle

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(input and output network streams are treated separately). Anything above

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011that limit will be dropped or temporary suppressed

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(within the available buffer limits).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011This option can also be set through the database, for a particular realm.

Dec  8 14:34:33 sun turnserver[1020]:  -B, --bps-capacity#011#011<number>#011Maximum server capacity.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Total bytes-per-second bandwidth the TURN server is allowed to allocate

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011for the sessions, combined (input and output network streams are treated separately).

Dec  8 14:34:33 sun turnserver[1020]:  -c#011#011#011#011<filename>#011Configuration file name (default - turnserver.conf).

Dec  8 14:34:33 sun turnserver[1020]:  -b, , --db, --userdb#011<filename>#011#011SQLite database file name; default - /var/db/turndb or

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011    /usr/local/var/db/turndb or /var/lib/turn/turndb.

Dec  8 14:34:33 sun turnserver[1020]:  -e, --psql-userdb, --sql-userdb <conn-string>#011PostgreSQL database connection string, if used (default - empty, no PostreSQL DB used).

Dec  8 14:34:33 sun turnserver[1020]: #011#011                                This database can be used for long-term credentials mechanism users,

Dec  8 14:34:33 sun turnserver[1020]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011See http://www.postgresql.org/docs/8.4/static/libpq-connect.html for 8.x PostgreSQL

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011versions format, see

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011for 9.x and newer connection string formats.

Dec  8 14:34:33 sun turnserver[1020]:  -M, --mysql-userdb#011<connection-string>#011MySQL database connection string, if used (default - empty, no MySQL DB used).

Dec  8 14:34:33 sun turnserver[1020]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:33 sun turnserver[1020]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:33 sun turnserver[1020]: #011        #011          #011#011"host=<ip-addr> dbname=<database-name> user=<database-user> \

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds> read_timeout=<seconds>".

Dec  8 14:34:33 sun turnserver: 0: Listener address to use: ::1

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The connection string parameters for the secure communications (SSL):

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011ca, capath, cert, key, cipher

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(see http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html for the

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011command options description).

Dec  8 14:34:33 sun turnserver[1020]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:33 sun turnserver[1020]:  --secret-key-file#011<filename>#011#011This is the file path which contain secret key of aes encryption while using MySQL password encryption.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011If you want to use in the MySQL connection string the password in encrypted format,

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011then set in this option the file path of the secret key. The key which is used to encrypt MySQL password.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Warning: If this option is set, then MySQL password must be set in "mysql-userdb" option in encrypted format!

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011If you want to use cleartext password then do not set this option!

Dec  8 14:34:33 sun turnserver[1020]:  -N, --redis-userdb#011<connection-string>#011Redis user database connection string, if used (default - empty, no Redis DB used).

Dec  8 14:34:33 sun turnserver[1020]: #011                                #011This database can be used for long-term credentials mechanism users,

Dec  8 14:34:33 sun turnserver[1020]: #011#011                                and it can store the secret value(s) for secret-based timed authentication in TURN RESP API.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The connection string my be space-separated list of parameters:

Dec  8 14:34:33 sun turnserver[1020]: #011        #011          #011#011"host=<ip-addr> dbname=<db-number> \

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011#011#011password=<database-user-password> port=<db-port> connect_timeout=<seconds>".

Dec  8 14:34:33 sun turnserver[1020]: #011        #011          #011#011All connection-string parameters are optional.

Dec  8 14:34:33 sun turnserver[1020]:  -O, --redis-statsdb#011<connection-string>#011Redis status and statistics database connection string, if used

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(default - empty, no Redis stats DB used).

Dec  8 14:34:33 sun turnserver[1020]: #011                                #011This database keeps allocations status information, and it can be also used for publishing

Dec  8 14:34:33 sun turnserver[1020]: #011#011                                and delivering traffic and allocation event notifications.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The connection string has the same parameters as redis-userdb connection string.

Dec  8 14:34:33 sun turnserver[1020]:  --use-auth-secret#011#011#011#011TURN REST API flag.

Dec  8 14:34:33 sun turnserver: 0: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Flag that sets a special authorization option that is based upon authentication secret

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(TURN Server REST API, see TURNServerRESTAPI.pdf). This option is used with timestamp.

Dec  8 14:34:33 sun turnserver[1020]:  --static-auth-secret#011#011<secret>#011'Static' authentication secret value (a string) for TURN REST API only.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011If not set, then the turn server will try to use the 'dynamic' value

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011in turn_secret table in user database (if present).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011That database value can be changed on-the-fly

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011by a separate program, so this is why it is 'dynamic'.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Multiple shared secrets can be used (both in the database and in the "static" fashion).

Dec  8 14:34:33 sun turnserver[1020]:  --server-name#011#011#011#011#011Server name used for

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011the oAuth authentication purposes.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The default value is the realm name.

Dec  8 14:34:33 sun turnserver[1020]:  --oauth#011#011#011#011#011Support oAuth authentication.

Dec  8 14:34:33 sun turnserver[1020]:  -n#011#011#011#011#011#011Do not use configuration file, take all parameters from the command line only.

Dec  8 14:34:33 sun turnserver[1020]:  --cert#011#011#011<filename>#011#011Certificate file, PEM format. Same file search rules

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011If both --no-tls and --no_dtls options

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011are specified, then this parameter is not needed.

Dec  8 14:34:33 sun turnserver[1020]:  --pkey#011#011#011<filename>#011#011Private key file, PEM format. Same file search rules

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011applied as for the configuration file.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011If both --no-tls and --no-dtls options

Dec  8 14:34:33 sun turnserver[1020]:  --pkey-pwd#011#011<password>#011#011If the private key file is encrypted, then this password to be used.

Dec  8 14:34:33 sun turnserver[1020]:  --cipher-list#011<"cipher-string">#011#011Allowed OpenSSL cipher list for TLS/DTLS connections.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Default value is "DEFAULT".

Dec  8 14:34:33 sun turnserver[1020]:  --CA-file#011#011<filename>#011#011CA file in OpenSSL format.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Forces TURN server to verify the client SSL certificates.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011By default, no CA is set and no client certificate check is performed.

Dec  8 14:34:33 sun turnserver[1020]:  --ec-curve-name#011<curve-name>#011#011Curve name for EC ciphers, if supported by OpenSSL

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011library (TLS and DTLS). The default value is prime256v1,

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011if pre-OpenSSL 1.0.2 is used. With OpenSSL 1.0.2+,

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011an optimal curve will be automatically calculated, if not defined

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011by this option.

Dec  8 14:34:33 sun turnserver[1020]:  --dh566#011#011#011#011#011Use 566 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:33 sun turnserver[1020]:  --dh2066#011#011#011#011#011Use 2066 bits predefined DH TLS key. Default size of the predefined key is 1066.

Dec  8 14:34:33 sun turnserver[1020]:  --dh-file#011<dh-file-name>#011#011#011Use custom DH TLS key, stored in PEM format in the file.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Flags --dh566 and --dh2066 are ignored when the DH key is taken from a file.

Dec  8 14:34:33 sun turnserver[1020]:  --no-tlsv1#011#011#011#011#011Do not allow TLSv1/DTLSv1 protocol.

Dec  8 14:34:33 sun turnserver[1020]:  --no-tlsv1_1#011#011#011#011#011Do not allow TLSv1.1 protocol.

Dec  8 14:34:33 sun turnserver[1020]:  --no-tlsv1_2#011#011#011#011#011Do not allow TLSv1.2/DTLSv1.2 protocol.

Dec  8 14:34:33 sun turnserver[1020]:  --no-udp#011#011#011#011#011Do not start UDP client listeners.

Dec  8 14:34:33 sun turnserver[1020]:  --no-tcp#011#011#011#011#011Do not start TCP client listeners.

Dec  8 14:34:33 sun turnserver[1020]:  --no-tls#011#011#011#011#011Do not start TLS client listeners.

Dec  8 14:34:33 sun turnserver[1020]:  --no-dtls#011#011#011#011#011Do not start DTLS client listeners.

Dec  8 14:34:33 sun turnserver[1020]:  --no-udp-relay#011#011#011#011#011Do not allow UDP relay endpoints, use only TCP relay option.

Dec  8 14:34:33 sun turnserver[1020]:  --no-tcp-relay#011#011#011#011#011Do not allow TCP relay endpoints, use only UDP relay options.

Dec  8 14:34:33 sun turnserver[1020]:  -l, --log-file#011#011<filename>#011#011Option to set the full path name of the log file.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011By default, the turnserver tries to open a log file in

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011/var/log/turnserver/, /var/log, /var/tmp, /tmp and . (current) directories

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(which open operation succeeds first that file will be used).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011With this option you can set the definite log file name.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The special names are "stdout" and "-" - they will force everything

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011to the stdout; and "syslog" name will force all output to the syslog.

Dec  8 14:34:33 sun turnserver[1020]:  --no-stdout-log#011#011#011#011Flag to prevent stdout log messages.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011By default, all log messages are going to both stdout and to

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011a log file. With this option everything will be going to the log file only

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(unless the log file itself is stdout).

Dec  8 14:34:33 sun turnserver[1020]:  --syslog#011#011#011#011#011Output all log information into the system log (syslog), do not use the file output.

Dec  8 14:34:33 sun turnserver[1020]:  --simple-log#011#011#011#011#011This flag means that no log file rollover will be used, and the log file

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011name will be constructed as-is, without PID and date appendage.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011This option can be used, for example, together with the logrotate tool.

Dec  8 14:34:33 sun Tor[929]: Bootstrapped 0%: Starting

Dec  8 14:34:33 sun systemd[1]: coturn.service: Control process exited, code=exited, status=255/EXCEPTION

Dec  8 14:34:33 sun turnserver[1020]:  --stale-nonce[=<value>]#011#011#011Use extra security with nonce value having limited lifetime (default 600 secs).

Dec  8 14:34:33 sun turnserver[1020]:  --max-allocate-lifetime#011<value>#011#011Set the maximum value for the allocation lifetime. Default to 3600 secs.

Dec  8 14:34:33 sun turnserver[1020]:  --channel-lifetime#011#011<value>#011#011Set the lifetime for channel binding, default to 600 secs.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011This value MUST not be changed for production purposes.

Dec  8 14:34:33 sun turnserver[1020]:  --permission-lifetime#011#011<value>#011#011Set the value for the lifetime of the permission. Default to 300 secs.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011This MUST not be changed for production purposes.

Dec  8 14:34:33 sun turnserver[1020]:  -S, --stun-only#011#011#011#011Option to set standalone STUN operation only, all TURN requests will be ignored.

Dec  8 14:34:33 sun turnserver[1020]:      --no-stun#011#011#011#011#011Option to suppress STUN functionality, only TURN requests will be processed.

Dec  8 14:34:33 sun turnserver[1020]:  --alternate-server#011#011<ip:port>#011Set the TURN server to redirect the allocate requests (UDP and TCP services).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:33 sun turnserver[1020]:  --tls-alternate-server#011<ip:port>#011#011Set the TURN server to redirect the allocate requests (DTLS and TLS services).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Multiple alternate-server options can be set for load balancing purposes.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011See the docs for more information.

Dec  8 14:34:33 sun turnserver[1020]:  -C, --rest-api-separator#011<SYMBOL>#011This is the timestamp/username separator symbol (character) in TURN REST API.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The default value is ':'.

Dec  8 14:34:33 sun turnserver[1020]:  --max-allocate-timeout=<seconds>#011#011Max time, in seconds, allowed for full allocation establishment. Default is 60.

Dec  8 14:34:33 sun turnserver[1020]:  --allowed-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are explicitly allowed to connect to the

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011turn server. Multiple allowed-peer-ip can be set.

Dec  8 14:34:33 sun turnserver[1020]:  --denied-peer-ip=<ip[-ip]> #011#011#011Specifies an ip or range of ips that are not allowed to connect to the turn server.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Multiple denied-peer-ip can be set.

Dec  8 14:34:33 sun turnserver[1020]:  --pidfile <"pid-file-name">#011#011#011File name to store the pid of the process.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Default is /var/run/turnserver.pid (if superuser account is used) or

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011/var/tmp/turnserver.pid .

Dec  8 14:34:33 sun turnserver[1020]:  --secure-stun#011#011#011#011#011Require authentication of the STUN Binding request.

Dec  8 14:34:33 sun systemd[1]: coturn.service: Failed with result 'exit-code'.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011By default, the clients are allowed anonymous access to the STUN Binding functionality.

Dec  8 14:34:33 sun turnserver[1020]:  --proc-user <user-name>#011#011#011User name to run the turnserver process.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011will make an attempt to change the current user ID to that user.

Dec  8 14:34:33 sun turnserver[1020]:  --proc-group <group-name>#011#011#011Group name to run the turnserver process.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011After the initialization, the turnserver process

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011will make an attempt to change the current group ID to that group.

Dec  8 14:34:33 sun turnserver[1020]:  --mobility#011#011#011#011#011Mobility with ICE (MICE) specs support.

Dec  8 14:34:33 sun turnserver[1020]:  -K, --keep-address-family#011#011#011TURN server allocates address family according TURN

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011Client <=> Server communication address family.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011!! It breaks RFC6156 section-4.2 (violates default IPv4) !!

Dec  8 14:34:33 sun turnserver[1020]:  --no-cli#011#011#011#011#011Turn OFF the CLI support. By default it is always ON.

Dec  8 14:34:33 sun turnserver[1020]:  --cli-ip=<IP>#011#011#011#011#011Local system IP address to be used for CLI server endpoint. Default value

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:33 sun turnserver[1020]:  --cli-port=<port>#011#011#011#011CLI server port. Default is 5766.

Dec  8 14:34:33 sun turnserver[1020]:  --cli-password=<password>#011#011#011CLI access password. Default is empty (no password).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011For the security reasons, it is recommended to use the encrypted

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011for of the password (see the -P command in the turnadmin utility).

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011The dollar signs in the encrypted form must be escaped.

Dec  8 14:34:33 sun turnserver[1020]:  --web-admin#011#011#011#011#011Enable Turn Web-admin support. By default it is disabled.

Dec  8 14:34:33 sun turnserver[1020]:  --web-admin-ip=<IP>#011#011#011#011Local system IP address to be used for Web-admin server endpoint. Default value

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011is 127.0.0.1.

Dec  8 14:34:33 sun turnserver[1020]:  --web-admin-port=<port>#011#011#011Web-admin server port. Default is 8080.

Dec  8 14:34:33 sun turnserver[1020]:  --web-admin-listen-on-workers#011#011#011Enable for web-admin server to listens on STUN/TURN workers STUN/TURN ports.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011By default it is disabled for security resons!

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011(This behavior used to be the default behavior, and was enabled by default.)

Dec  8 14:34:33 sun turnserver[1020]:  --server-relay#011#011#011#011#011Server relay. NON-STANDARD AND DANGEROUS OPTION. Only for those applications

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011when we want to run server applications on the relay endpoints.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011This option eliminates the IP permissions check on the packets

Dec  8 14:34:33 sun systemd[1]: Failed to start coTURN STUN/TURN Server.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011incoming to the relay endpoints.

Dec  8 14:34:33 sun turnserver[1020]:  --cli-max-output-sessions#011#011#011Maximum number of output sessions in ps CLI command.

Dec  8 14:34:33 sun turnserver[1020]: #011#011#011#011#011#011This value can be changed on-the-fly in CLI. The default value is 256.

Dec  8 14:34:33 sun turnserver[1020]:  --ne=[1|2|3]#011#011#011#011#011Set network engine type for the process (for internal purposes).

Dec  8 14:34:33 sun turnserver[1020]:  -h#011#011#011#011#011#011Help

Dec  8 14:34:33 sun turnserver[1020]:  For more information, see the wiki pages:

Dec  8 14:34:33 sun turnserver[1020]: #011https://github.com/coturn/coturn/wiki/

Dec  8 14:34:33 sun turnserver[1020]: 0: log file opened: /var/tmp/turn_1020_2020-12-08.log

Dec  8 14:34:33 sun turnserver[1020]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 0.0.0.0-0.255.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 10.0.0.0-10.255.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 100.64.0.0-100.127.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 169.254.0.0-169.254.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 127.0.0.0-127.255.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 172.16.0.0-172.31.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 192.0.0.0-192.0.0.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 192.0.2.0-192.0.2.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 192.88.99.0-192.88.99.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 192.168.0.0-192.168.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 198.18.0.0-198.19.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 198.51.100.0-198.51.100.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 203.0.113.0-203.0.113.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Black listing: 240.0.0.0-255.255.255.255

Dec  8 14:34:33 sun turnserver[1020]: 0: Bad configuration format: no-loopback-peers

Dec  8 14:34:33 sun turnserver[1020]: 0:

Dec  8 14:34:33 sun turnserver[1020]: RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server

Dec  8 14:34:33 sun turnserver[1020]: Version Coturn-4.5.1.1 'dan Eider'

Dec  8 14:34:33 sun turnserver[1020]: 0:

Dec  8 14:34:33 sun turnserver[1020]: Max number of open files/sockets allowed for this process: 524288

Dec  8 14:34:33 sun turnserver[1020]: 0:

Dec  8 14:34:33 sun turnserver[1020]: Due to the open files/sockets limitation,

Dec  8 14:34:33 sun turnserver[1020]: max supported number of TURN Sessions possible is: 262000 (approximately)

Dec  8 14:34:33 sun turnserver[1020]: 0:

Dec  8 14:34:33 sun turnserver[1020]: ==== Show him the instruments, Practical Frost: ====

Dec  8 14:34:33 sun turnserver[1020]: 0: TLS supported

Dec  8 14:34:33 sun turnserver[1020]: 0: DTLS supported

Dec  8 14:34:33 sun turnserver[1020]: 0: DTLS 1.2 supported

Dec  8 14:34:33 sun turnserver[1020]: 0: TURN/STUN ALPN supported

Dec  8 14:34:33 sun turnserver[1020]: 0: Third-party authorization (oAuth) supported

Dec  8 14:34:33 sun turnserver[1020]: 0: GCM (AEAD) supported

Dec  8 14:34:33 sun turnserver[1020]: 0: OpenSSL compile-time version: OpenSSL 1.1.1d  10 Sep 2019 (0x1010104f)

Dec  8 14:34:33 sun turnserver[1020]: 0:

Dec  8 14:34:33 sun turnserver[1020]: 0: SQLite supported, default database location is /var/lib/turn/turndb

Dec  8 14:34:33 sun turnserver[1020]: 0: Redis supported

Dec  8 14:34:33 sun turnserver[1020]: 0: PostgreSQL supported

Dec  8 14:34:33 sun turnserver[1020]: 0: MySQL supported

Dec  8 14:34:33 sun turnserver[1020]: 0: MongoDB is not supported

Dec  8 14:34:33 sun turnserver[1020]: 0:

Dec  8 14:34:33 sun turnserver[1020]: 0: Default Net Engine version: 3 (UDP thread per CPU core)

Dec  8 14:34:33 sun turnserver[1020]: =====================================================

Dec  8 14:34:33 sun turnserver[1020]: 0: Domain name:

Dec  8 14:34:33 sun turnserver[1020]: 0: Default realm: sun.0i0.fr

Dec  8 14:34:33 sun turnserver[1020]: 0:

Dec  8 14:34:33 sun turnserver[1020]: CONFIG: --no-tcp-relay: TCP relay endpoints are not allowed.

Dec  8 14:34:33 sun turnserver[1020]: 0: ERROR:

Dec  8 14:34:33 sun turnserver[1020]: CONFIG ERROR: Empty cli-password, and so telnet cli interface is disabled! Please set a non empty cli-password!

Dec  8 14:34:33 sun turnserver[1020]: 0: WARNING: cannot find private key file: /etc/jitsi/meet/sun.0i0.fr.key (1)

Dec  8 14:34:33 sun turnserver[1020]: 0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly

Dec  8 14:34:33 sun turnserver[1020]: 0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED

Dec  8 14:34:33 sun turnserver[1020]: 0: ===========Discovering listener addresses: =========

Dec  8 14:34:33 sun turnserver[1020]: 0: Listener address to use: 127.0.0.1

Dec  8 14:34:33 sun turnserver[1020]: 0: Listener address to use: ::1

Dec  8 14:34:33 sun turnserver[1020]: 0: ERROR: main: Cannot configure any meaningful IP listener address

Dec  8 14:34:33 sun systemd[1]: coturn.service: Service RestartSec=100ms expired, scheduling restart.

Dec  8 14:34:33 sun systemd[1]: coturn.service: Scheduled restart job, restart counter is at 5.

Dec  8 14:34:33 sun systemd[1]: Stopped coTURN STUN/TURN Server.

Dec  8 14:34:33 sun systemd[1]: coturn.service: Start request repeated too quickly.

Dec  8 14:34:33 sun systemd[1]: coturn.service: Failed with result 'exit-code'.

Dec  8 14:34:33 sun systemd[1]: Failed to start coTURN STUN/TURN Server.

Dec  8 14:34:34 sun systemd[1]: Started High performance HTTP 1.1 webserver written in Erlang.

Dec  8 14:34:34 sun systemd[1]: Created slice User Slice of UID 115.

Dec  8 14:34:34 sun systemd[1]: Starting User Runtime Directory /run/user/115...

Dec  8 14:34:34 sun systemd[1]: Started User Runtime Directory /run/user/115.

Dec  8 14:34:34 sun systemd[1]: Starting User Manager for UID 115...

Dec  8 14:34:34 sun Tor[929]: Starting with guard context "default"

Dec  8 14:34:34 sun Tor[929]: Signaled readiness to systemd

Dec  8 14:34:34 sun systemd[1]: Started Anonymizing overlay network for TCP.

Dec  8 14:34:34 sun Tor[929]: Problem bootstrapping. Stuck at 0%: Starting. (Network is unreachable; NOROUTE; count 1; recommendation warn; host 4CD4DFFEF3971C902A22100D911CAC639BE2EF5C at 143.178.111.120:9001)

Dec  8 14:34:34 sun Tor[929]: Opening Socks listener on /run/tor/socks

Dec  8 14:34:34 sun Tor[929]: Opened Socks listener on /run/tor/socks

Dec  8 14:34:34 sun Tor[929]: Opening Control listener on /run/tor/control

Dec  8 14:34:34 sun Tor[929]: Opened Control listener on /run/tor/control

Dec  8 14:34:34 sun Tor[929]: Bootstrapped 5%: Connecting to directory server

Dec  8 14:34:34 sun Tor[929]: Problem bootstrapping. Stuck at 5%: Connecting to directory server. (Network is unreachable; NOROUTE; count 2; recommendation warn; host 708A968F3644F8A547156368FEA3DB664110E631 at 178.63.72.24:9001)

Dec  8 14:34:34 sun Tor[929]: Problem bootstrapping. Stuck at 5%: Connecting to directory server. (Network is unreachable; NOROUTE; count 3; recommendation warn; host 08F06A0DDAFABF9A26FCB2E392A1435F9E048216 at 195.201.168.111:9001)

Dec  8 14:34:34 sun systemd[1079]: Listening on GnuPG cryptographic agent (ssh-agent emulation).

Dec  8 14:34:34 sun systemd[1079]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).

Dec  8 14:34:34 sun systemd[1079]: Listening on GnuPG network certificate management daemon.

Dec  8 14:34:34 sun systemd[1079]: Reached target Paths.

Dec  8 14:34:34 sun systemd[1079]: Reached target Timers.

Dec  8 14:34:34 sun systemd[1079]: Starting D-Bus User Message Bus Socket.

Dec  8 14:34:34 sun systemd[1079]: Listening on Sound System.

Dec  8 14:34:34 sun systemd[1079]: Listening on GnuPG cryptographic agent and passphrase cache.

Dec  8 14:34:34 sun systemd[1079]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).

Dec  8 14:34:34 sun systemd[1079]: Listening on D-Bus User Message Bus Socket.

Dec  8 14:34:34 sun systemd[1079]: Reached target Sockets.

Dec  8 14:34:34 sun systemd[1079]: Reached target Basic System.

Dec  8 14:34:34 sun systemd[1079]: Reached target Default.

Dec  8 14:34:34 sun systemd[1079]: Startup finished in 156ms.

Dec  8 14:34:34 sun systemd[1]: Started User Manager for UID 115.

Dec  8 14:34:34 sun systemd[1]: Started Session c1 of user lightdm.

Dec  8 14:34:34 sun Tor[929]: Problem bootstrapping. Stuck at 5%: Connecting to directory server. (Network is unreachable; NOROUTE; count 4; recommendation warn; host B411027C926A9BFFCF7DA91E3CAF1856A321EFFD at 51.15.76.56:443)

Dec  8 14:34:34 sun ModemManager[734]: <info>  Couldn't check support for device '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0': not supported by any plugin

Dec  8 14:34:34 sun ModemManager[734]: <info>  Couldn't check support for device '/sys/devices/pci0000:00/0000:00:1c.3/0000:09:00.0': not supported by any plugin

Dec  8 14:34:34 sun systemd[1079]: Started D-Bus User Message Bus.

Dec  8 14:34:34 sun dbus-daemon[1094]: [session uid=115 pid=1094] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.1' (uid=115 pid=1091 comm="/usr/sbin/lightdm-gtk-greeter ")

Dec  8 14:34:34 sun systemd[1079]: Starting Accessibility services bus...

Dec  8 14:34:35 sun dbus-daemon[1094]: [session uid=115 pid=1094] Successfully activated service 'org.a11y.Bus'

Dec  8 14:34:35 sun systemd[1079]: Started Accessibility services bus.

Dec  8 14:34:35 sun at-spi-bus-launcher[1095]: dbus-daemon[1100]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=115 pid=1091 comm="/usr/sbin/lightdm-gtk-greeter ")

Dec  8 14:34:35 sun at-spi-bus-launcher[1095]: dbus-daemon[1100]: Successfully activated service 'org.a11y.atspi.Registry'

Dec  8 14:34:35 sun at-spi-bus-launcher[1095]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

Dec  8 14:34:35 sun dbus-daemon[1094]: [session uid=115 pid=1094] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.4' (uid=115 pid=1091 comm="/usr/sbin/lightdm-gtk-greeter ")

Dec  8 14:34:35 sun systemd[1079]: Starting Virtual filesystem service...

Dec  8 14:34:35 sun dbus-daemon[1094]: [session uid=115 pid=1094] Successfully activated service 'org.gtk.vfs.Daemon'

Dec  8 14:34:35 sun systemd[1079]: Started Virtual filesystem service.

Dec  8 14:34:35 sun kernel: [   71.387736] fuse init (API version 7.27)

Dec  8 14:34:35 sun systemd[1]: Mounting FUSE Control File System...

Dec  8 14:34:35 sun systemd[1]: Mounted FUSE Control File System.

Dec  8 14:34:35 sun Tor[929]: Problem bootstrapping. Stuck at 5%: Connecting to directory server. (Network is unreachable; NOROUTE; count 5; recommendation warn; host C37F87C0125E26E6ACF54366FA2198209E856ABE at 185.80.222.164:443)

Dec  8 14:34:35 sun kernel: [   72.098687] r8169 0000:09:00.0 enp9s0: Link is Up - 1Gbps/Full - flow control rx/tx

Dec  8 14:34:35 sun kernel: [   72.098698] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8911] device (enp9s0): carrier: link connected

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8917] device (enp9s0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8931] policy: auto-activating connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8944] device (enp9s0): Activation: starting connection 'DHCP' (051f69e2-8743-4fea-b376-dc5a2888c605)

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8946] device (enp9s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8952] manager: NetworkManager state is now CONNECTING

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8956] device (enp9s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.8963] device (enp9s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.9050] dhcp4 (enp9s0): activation: beginning transaction (timeout in 45 seconds)

Dec  8 14:34:35 sun NetworkManager[741]: <info>  [1607434475.9156] dhcp4 (enp9s0): dhclient started with pid 1134

Dec  8 14:34:35 sun avahi-daemon[744]: Joining mDNS multicast group on interface enp9s0.IPv6 with address fe80::a9e:1ff:fe2e:3be5.

Dec  8 14:34:35 sun avahi-daemon[744]: New relevant interface enp9s0.IPv6 for mDNS.

Dec  8 14:34:35 sun avahi-daemon[744]: Registering new address record for fe80::a9e:1ff:fe2e:3be5 on enp9s0.*.

Dec  8 14:34:35 sun dhclient[1134]: DHCPREQUEST for 192.168.1.35 on enp9s0 to 255.255.255.255 port 67

Dec  8 14:34:35 sun dhclient[1134]: DHCPACK of 192.168.1.35 from 192.168.1.10

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0015] dhcp4 (enp9s0):   address 192.168.1.35

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0015] dhcp4 (enp9s0):   plen 24 (255.255.255.0)

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0016] dhcp4 (enp9s0):   gateway 192.168.1.10

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0016] dhcp4 (enp9s0):   lease time 43200

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0016] dhcp4 (enp9s0):   nameserver '192.168.1.10'

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0016] dhcp4 (enp9s0): state changed unknown -> bound

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0032] device (enp9s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0043] device (enp9s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0047] device (enp9s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0054] manager: NetworkManager state is now CONNECTED_LOCAL

Dec  8 14:34:36 sun avahi-daemon[744]: Joining mDNS multicast group on interface enp9s0.IPv4 with address 192.168.1.35.

Dec  8 14:34:36 sun avahi-daemon[744]: New relevant interface enp9s0.IPv4 for mDNS.

Dec  8 14:34:36 sun avahi-daemon[744]: Registering new address record for 192.168.1.35 on enp9s0.IPv4.

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0131] manager: NetworkManager state is now CONNECTED_SITE

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0133] policy: set 'DHCP' (enp9s0) as default for IPv4 routing and DNS

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0190] device (enp9s0): Activation: successful, device activated.

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0202] manager: NetworkManager state is now CONNECTED_GLOBAL

Dec  8 14:34:36 sun NetworkManager[741]: <info>  [1607434476.0208] manager: startup complete

Dec  8 14:34:36 sun nm-dispatcher: req:3 'up' [enp9s0]: new request (1 scripts)

Dec  8 14:34:36 sun nm-dispatcher: req:3 'up' [enp9s0]: start running ordered scripts...

Dec  8 14:34:36 sun nm-dispatcher: req:4 'connectivity-change': new request (1 scripts)

Dec  8 14:34:36 sun systemd[1]: Started Network Manager Wait Online.

Dec  8 14:34:36 sun systemd[1]: Reached target Network is Online.

Dec  8 14:34:36 sun systemd[1]: Starting vboxweb-service.service...

Dec  8 14:34:36 sun systemd[1]: Starting SMS daemon for Gammu...

Dec  8 14:34:36 sun dhclient[1134]: bound to 192.168.1.35 -- renewal in 18930 seconds.

Dec  8 14:34:36 sun systemd[1]: Starting LSB: disk temperature monitoring daemon...

Dec  8 14:34:36 sun systemd[1]: Starting LSB: VirtualBox Linux kernel module...

Dec  8 14:34:36 sun systemd[1]: Starting LSB: exim Mail Transport Agent...

Dec  8 14:34:36 sun systemd[1]: Starting Jitsi Videobridge...

Dec  8 14:34:36 sun systemd[1]: Started vboxweb-service.service.

Dec  8 14:34:36 sun systemd[1]: Started Jitsi Videobridge.

Dec  8 14:34:36 sun gammu-smsd[1147]: Warning: No PIN code in /etc/gammu-smsdrc file

Dec  8 14:34:36 sun systemd[1]: gammu-smsd.service: Can't open PID file /run/gammu-smsd.pid (yet?) after start: No such file or directory

Dec  8 14:34:36 sun gammu-smsd[1162]: Created POSIX RW shared memory at 0x7f6e8cea8000

Dec  8 14:34:36 sun gammu-smsd[1162]: Starting phone communication...

Dec  8 14:34:36 sun gammu-smsd[1162]: Can't open device: Erreur à l'ouverture du périphérique : périphérique inconnu, occupé ou problème de permissions. (DEVICEOPENERROR[2])

Dec  8 14:34:36 sun gammu-smsd[1162]: Stopping Gammu smsd: Aucune erreur. (NONE[1])

Dec  8 14:34:36 sun systemd[1]: Started SMS daemon for Gammu.

Dec  8 14:34:36 sun systemd[1]: gammu-smsd.service: Main process exited, code=exited, status=2/INVALIDARGUMENT

Dec  8 14:34:36 sun systemd[1]: Started LSB: disk temperature monitoring daemon.

Dec  8 14:34:36 sun systemd[1]: gammu-smsd.service: Failed with result 'exit-code'.

Dec  8 14:34:36 sun virtualbox[1149]: Loading VirtualBox kernel modules....

Dec  8 14:34:36 sun systemd[1]: Started LSB: VirtualBox Linux kernel module.

Dec  8 14:34:36 sun nm-dispatcher: req:4 'connectivity-change': start running ordered scripts...

Dec  8 14:34:36 sun systemd[1]: systemd-rfkill.service: Succeeded.

Dec  8 14:34:36 sun Tor[929]: Bootstrapped 10%: Finishing handshake with directory server

Dec  8 14:34:36 sun Tor[929]: Bootstrapped 80%: Connecting to the Tor network

Dec  8 14:34:36 sun Tor[929]: Bootstrapped 90%: Establishing a Tor circuit

Dec  8 14:34:37 sun NetworkManager[741]: <info>  [1607434477.0001] policy: set 'DHCP' (enp9s0) as default for IPv6 routing and DNS

Dec  8 14:34:37 sun avahi-daemon[744]: Leaving mDNS multicast group on interface enp9s0.IPv6 with address fe80::a9e:1ff:fe2e:3be5.

Dec  8 14:34:37 sun avahi-daemon[744]: Joining mDNS multicast group on interface enp9s0.IPv6 with address 2a01:e35:2ff3:d080:a9e:1ff:fe2e:3be5.

Dec  8 14:34:37 sun avahi-daemon[744]: Registering new address record for 2a01:e35:2ff3:d080:a9e:1ff:fe2e:3be5 on enp9s0.*.

Dec  8 14:34:37 sun avahi-daemon[744]: Withdrawing address record for fe80::a9e:1ff:fe2e:3be5 on enp9s0.

Dec  8 14:34:37 sun exim4[1150]: Starting MTA: exim4.

Dec  8 14:34:37 sun systemd[1]: Started LSB: exim Mail Transport Agent.

Dec  8 14:34:37 sun systemd[1]: Reached target Multi-User System.

Dec  8 14:34:37 sun systemd[1]: Reached target Graphical Interface.

Dec  8 14:34:37 sun systemd[1]: Starting Update UTMP about System Runlevel Changes...

Dec  8 14:34:37 sun systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.

Dec  8 14:34:37 sun systemd[1]: Started Update UTMP about System Runlevel Changes.

Dec  8 14:34:37 sun systemd[1]: Startup finished in 1min 6.398s (kernel) + 6.921s (userspace) = 1min 13.320s.

Dec  8 14:34:37 sun Tor[929]: Bootstrapped 100%: Done

Dec  8 14:34:38 sun avahi-daemon[744]: Registering new address record for 2a01:e35:2ff3:d080:e571:bb3e:47d5:50c8 on enp9s0.*.

Dec  8 14:34:45 sun systemd[1]: session-c1.scope: Killing process 1074 (lightdm) with signal SIGTERM.

Dec  8 14:34:45 sun systemd[1]: session-c1.scope: Killing process 1091 (lightdm-gtk-gre) with signal SIGTERM.

Dec  8 14:34:45 sun systemd[1]: Stopping Session c1 of user lightdm.

Dec  8 14:34:45 sun systemd[1]: session-c1.scope: Succeeded.

Dec  8 14:34:45 sun systemd[1]: Stopped Session c1 of user lightdm.

Dec  8 14:34:45 sun systemd[1]: Created slice User Slice of UID 1000.

Dec  8 14:34:45 sun systemd[1]: Starting User Runtime Directory /run/user/1000...

Dec  8 14:34:45 sun systemd[1]: Started User Runtime Directory /run/user/1000.

Dec  8 14:34:45 sun systemd[1]: Starting User Manager for UID 1000...

Dec  8 14:34:45 sun systemd[1569]: Reached target Timers.

Dec  8 14:34:45 sun systemd[1569]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).

Dec  8 14:34:45 sun systemd[1569]: Listening on GnuPG cryptographic agent and passphrase cache.

Dec  8 14:34:45 sun systemd[1569]: Starting D-Bus User Message Bus Socket.

Dec  8 14:34:45 sun systemd[1569]: Listening on GnuPG network certificate management daemon.

Dec  8 14:34:45 sun systemd[1569]: Reached target Paths.

Dec  8 14:34:45 sun systemd[1569]: Listening on GnuPG cryptographic agent (ssh-agent emulation).

Dec  8 14:34:45 sun systemd[1569]: Listening on Sound System.

Dec  8 14:34:45 sun systemd[1569]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).

Dec  8 14:34:45 sun systemd[1569]: Listening on D-Bus User Message Bus Socket.

Dec  8 14:34:45 sun systemd[1569]: Reached target Sockets.

Dec  8 14:34:45 sun systemd[1569]: Reached target Basic System.

Dec  8 14:34:45 sun systemd[1569]: Reached target Default.

Dec  8 14:34:45 sun systemd[1569]: Startup finished in 68ms.

Dec  8 14:34:45 sun systemd[1]: Started User Manager for UID 1000.

Dec  8 14:34:45 sun systemd[1]: Started Session 2 of user madiwas.

Dec  8 14:34:45 sun systemd[1569]: Started D-Bus User Message Bus.

Dec  8 14:34:46 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.5' (uid=1000 pid=1655 comm="/usr/bin/ibus-daemon --daemonize --xim ")

Dec  8 14:34:46 sun systemd[1569]: Starting Virtual filesystem service...

Dec  8 14:34:46 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gtk.vfs.Daemon'

Dec  8 14:34:46 sun systemd[1569]: Started Virtual filesystem service.

Dec  8 14:34:46 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating service name='org.freedesktop.portal.IBus' requested by ':1.5' (uid=1000 pid=1655 comm="/usr/bin/ibus-daemon --daemonize --xim ")

Dec  8 14:34:46 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.freedesktop.portal.IBus'

Dec  8 14:34:46 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.10' (uid=1000 pid=1667 comm="/usr/lib/ibus/ibus-ui-gtk3 ")

Dec  8 14:34:46 sun systemd[1569]: Starting Accessibility services bus...

Dec  8 14:34:46 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.a11y.Bus'

Dec  8 14:34:46 sun systemd[1569]: Started Accessibility services bus.

Dec  8 14:34:46 sun at-spi-bus-launcher[1690]: dbus-daemon[1695]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=1586 comm="x-session-manager ")

Dec  8 14:34:46 sun at-spi-bus-launcher[1690]: dbus-daemon[1695]: Successfully activated service 'org.a11y.atspi.Registry'

Dec  8 14:34:46 sun at-spi-bus-launcher[1690]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

Dec  8 14:34:46 sun systemd[1569]: Starting Sound Service...

Dec  8 14:34:46 sun dbus-daemon[739]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.70' (uid=1000 pid=1726 comm="/usr/bin/pulseaudio --daemonize=no ")

Dec  8 14:34:46 sun systemd[1]: Starting RealtimeKit Scheduling Policy Service...

Dec  8 14:34:46 sun dbus-daemon[739]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'

Dec  8 14:34:46 sun systemd[1]: Started RealtimeKit Scheduling Policy Service.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Successfully called chroot.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Successfully dropped privileges.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Successfully limited resources.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Running.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Canary thread running.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Successfully made thread 1726 of process 1726 (n/a) owned by '1000' high priority at nice level -11.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Supervising 1 threads of 1 processes of 1 users.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Watchdog thread running.

Dec  8 14:34:46 sun systemd[1]: NetworkManager-dispatcher.service: Succeeded.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Supervising 1 threads of 1 processes of 1 users.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Successfully made thread 1785 of process 1726 (n/a) owned by '1000' RT at priority 5.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Supervising 2 threads of 1 processes of 1 users.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Supervising 2 threads of 1 processes of 1 users.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Successfully made thread 1786 of process 1726 (n/a) owned by '1000' RT at priority 5.

Dec  8 14:34:46 sun rtkit-daemon[1737]: Supervising 3 threads of 1 processes of 1 users.

Dec  8 14:34:46 sun dbus-daemon[739]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service' requested by ':1.81' (uid=1000 pid=1726 comm="/usr/bin/pulseaudio --daemonize=no ")

Dec  8 14:34:46 sun systemd[1]: Condition check resulted in Bluetooth service being skipped.

Dec  8 14:34:46 sun systemd[1569]: Started Sound Service.

Dec  8 14:34:47 sun kernel: [   83.309425] logitech-hidpp-device 0003:046D:101B.0004: HID++ 1.0 device connected.

Dec  8 14:34:47 sun dbus-daemon[739]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service' requested by ':1.83' (uid=1000 pid=1716 comm="/usr/lib/x86_64-linux-gnu/cinnamon-settings-daemon")

Dec  8 14:34:47 sun systemd[1]: Starting Daemon for power management...

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gtk.vfs.UDisks2VolumeMonitor' unit='gvfs-udisks2-volume-monitor.service' requested by ':1.33' (uid=1000 pid=1759 comm="/usr/lib/x86_64-linux-gnu/cinnamon-settings-daemon")

Dec  8 14:34:47 sun systemd[1569]: Starting Virtual filesystem service - disk device monitor...

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating service name='ca.desrt.dconf' requested by ':1.38' (uid=1000 pid=1744 comm="/usr/lib/x86_64-linux-gnu/cinnamon-settings-daemon")

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'ca.desrt.dconf'

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gtk.vfs.UDisks2VolumeMonitor'

Dec  8 14:34:47 sun systemd[1569]: Started Virtual filesystem service - disk device monitor.

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gtk.vfs.AfcVolumeMonitor' unit='gvfs-afc-volume-monitor.service' requested by ':1.33' (uid=1000 pid=1759 comm="/usr/lib/x86_64-linux-gnu/cinnamon-settings-daemon")

Dec  8 14:34:47 sun systemd[1569]: Starting Virtual filesystem service - Apple File Conduit monitor...

Dec  8 14:34:47 sun gvfs-afc-volume-monitor[1832]: Volume monitor alive

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gtk.vfs.AfcVolumeMonitor'

Dec  8 14:34:47 sun systemd[1569]: Started Virtual filesystem service - Apple File Conduit monitor.

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gtk.vfs.GoaVolumeMonitor' unit='gvfs-goa-volume-monitor.service' requested by ':1.33' (uid=1000 pid=1759 comm="/usr/lib/x86_64-linux-gnu/cinnamon-settings-daemon")

Dec  8 14:34:47 sun systemd[1569]: Starting Virtual filesystem service - GNOME Online Accounts monitor...

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating service name='org.gnome.OnlineAccounts' requested by ':1.46' (uid=1000 pid=1837 comm="/usr/lib/gvfs/gvfs-goa-volume-monitor ")

Dec  8 14:34:47 sun goa-daemon[1841]: goa-daemon version 3.30.1 starting

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating service name='org.gnome.Identity' requested by ':1.47' (uid=1000 pid=1841 comm="/usr/lib/gnome-online-accounts/goa-daemon ")

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gnome.OnlineAccounts'

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gnome.Identity'

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gtk.vfs.GoaVolumeMonitor'

Dec  8 14:34:47 sun systemd[1569]: Started Virtual filesystem service - GNOME Online Accounts monitor.

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gtk.vfs.GPhoto2VolumeMonitor' unit='gvfs-gphoto2-volume-monitor.service' requested by ':1.33' (uid=1000 pid=1759 comm="/usr/lib/x86_64-linux-gnu/cinnamon-settings-daemon")

Dec  8 14:34:47 sun systemd[1569]: Starting Virtual filesystem service - digital camera monitor...

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gtk.vfs.GPhoto2VolumeMonitor'

Dec  8 14:34:47 sun systemd[1569]: Started Virtual filesystem service - digital camera monitor.

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gtk.vfs.MTPVolumeMonitor' unit='gvfs-mtp-volume-monitor.service' requested by ':1.33' (uid=1000 pid=1759 comm="/usr/lib/x86_64-linux-gnu/cinnamon-settings-daemon")

Dec  8 14:34:47 sun systemd[1569]: Starting Virtual filesystem service - Media Transfer Protocol monitor...

Dec  8 14:34:47 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gtk.vfs.MTPVolumeMonitor'

Dec  8 14:34:47 sun systemd[1569]: Started Virtual filesystem service - Media Transfer Protocol monitor.

Dec  8 14:34:48 sun dbus-daemon[739]: [system] Successfully activated service 'org.freedesktop.UPower'

Dec  8 14:34:48 sun systemd[1]: Started Daemon for power management.

Dec  8 14:34:49 sun /cinnamon-killer-daemon: Bound Cinnamon restart to <Control><Alt>Escape.

Dec  8 14:34:50 sun NetworkManager[741]: <info>  [1607434490.1490] agent-manager: req[0x56499a1dbc10, :1.105/org.freedesktop.nm-applet/1000]: agent registered

Dec  8 14:34:50 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gnome.evolution.dataserver.Sources5' unit='evolution-source-registry.service' requested by ':1.62' (uid=1000 pid=1915 comm="/usr/lib/evolution/evolution-data-server/evolution")

Dec  8 14:34:50 sun systemd[1569]: Starting Evolution source registry...

Dec  8 14:34:50 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gnome.evolution.dataserver.Sources5'

Dec  8 14:34:50 sun systemd[1569]: Started Evolution source registry.

Dec  8 14:34:50 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gtk.vfs.Metadata' unit='gvfs-metadata.service' requested by ':1.56' (uid=1000 pid=1922 comm="nemo-desktop ")

Dec  8 14:34:50 sun systemd[1569]: Starting Virtual filesystem metadata service...

Dec  8 14:34:50 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gtk.vfs.Metadata'

Dec  8 14:34:50 sun systemd[1569]: Started Virtual filesystem metadata service.

Dec  8 14:34:50 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gnome.evolution.dataserver.Calendar7' unit='evolution-calendar-factory.service' requested by ':1.62' (uid=1000 pid=1915 comm="/usr/lib/evolution/evolution-data-server/evolution")

Dec  8 14:34:50 sun systemd[1569]: Starting Evolution calendar service...

Dec  8 14:34:50 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gnome.evolution.dataserver.Calendar7'

Dec  8 14:34:50 sun systemd[1569]: Started Evolution calendar service.

Dec  8 14:34:50 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gnome.evolution.dataserver.AddressBook9' unit='evolution-addressbook-factory.service' requested by ':1.66' (uid=1000 pid=1974 comm="/usr/lib/evolution/evolution-calendar-factory ")

Dec  8 14:34:50 sun systemd[1569]: Starting Evolution address book service...

Dec  8 14:34:50 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gnome.evolution.dataserver.AddressBook9'

Dec  8 14:34:50 sun systemd[1569]: Started Evolution address book service.

Dec  8 14:34:55 sun systemd[1]: Stopping User Manager for UID 115...

Dec  8 14:34:55 sun systemd[1079]: Stopping Accessibility services bus...

Dec  8 14:34:55 sun systemd[1079]: Stopping D-Bus User Message Bus...

Dec  8 14:34:55 sun systemd[1079]: Stopping Virtual filesystem service...

Dec  8 14:34:55 sun systemd[1079]: Stopped target Default.

Dec  8 14:34:55 sun systemd[1079]: dbus.service: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Stopped D-Bus User Message Bus.

Dec  8 14:34:55 sun systemd[1079]: at-spi-dbus-bus.service: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Stopped Accessibility services bus.

Dec  8 14:34:55 sun systemd[1079]: gvfs-daemon.service: Main process exited, code=killed, status=15/TERM

Dec  8 14:34:55 sun systemd[1569]: run-user-115-gvfs.mount: Succeeded.

Dec  8 14:34:55 sun systemd[1]: run-user-115-gvfs.mount: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: run-user-115-gvfs.mount: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: gvfs-daemon.service: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Stopped Virtual filesystem service.

Dec  8 14:34:55 sun systemd[1079]: Stopped target Basic System.

Dec  8 14:34:55 sun systemd[1079]: Stopped target Timers.

Dec  8 14:34:55 sun systemd[1079]: Stopped target Paths.

Dec  8 14:34:55 sun systemd[1079]: Stopped target Sockets.

Dec  8 14:34:55 sun systemd[1079]: gpg-agent-extra.socket: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Closed GnuPG cryptographic agent and passphrase cache (restricted).

Dec  8 14:34:55 sun systemd[1079]: gpg-agent.socket: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Closed GnuPG cryptographic agent and passphrase cache.

Dec  8 14:34:55 sun systemd[1079]: gpg-agent-browser.socket: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Closed GnuPG cryptographic agent and passphrase cache (access for web browsers).

Dec  8 14:34:55 sun systemd[1079]: dirmngr.socket: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Closed GnuPG network certificate management daemon.

Dec  8 14:34:55 sun systemd[1079]: dbus.socket: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Closed D-Bus User Message Bus Socket.

Dec  8 14:34:55 sun systemd[1079]: gpg-agent-ssh.socket: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Closed GnuPG cryptographic agent (ssh-agent emulation).

Dec  8 14:34:55 sun systemd[1079]: pulseaudio.socket: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Closed Sound System.

Dec  8 14:34:55 sun systemd[1079]: Reached target Shutdown.

Dec  8 14:34:55 sun systemd[1079]: systemd-exit.service: Succeeded.

Dec  8 14:34:55 sun systemd[1079]: Started Exit the Session.

Dec  8 14:34:55 sun systemd[1079]: Reached target Exit the Session.

Dec  8 14:34:55 sun systemd[1]: user@115.service: Succeeded.

Dec  8 14:34:55 sun systemd[1]: Stopped User Manager for UID 115.

Dec  8 14:34:55 sun systemd[1]: Stopping User Runtime Directory /run/user/115...

Dec  8 14:34:55 sun systemd[1569]: run-user-115.mount: Succeeded.

Dec  8 14:34:55 sun systemd[1]: run-user-115.mount: Succeeded.

Dec  8 14:34:55 sun systemd[1]: user-runtime-dir@115.service: Succeeded.

Dec  8 14:34:55 sun systemd[1]: Stopped User Runtime Directory /run/user/115.

Dec  8 14:34:55 sun systemd[1]: Removed slice User Slice of UID 115.

Dec  8 14:35:01 sun systemd-timesyncd[675]: Synchronized to time server for the first time [2001:bc8:255e:100::1]:123 (2.debian.pool.ntp.org).

Dec  8 14:35:02 sun systemd[1]: systemd-fsckd.service: Succeeded.

Dec  8 14:35:02 sun systemd[1]: systemd-hostnamed.service: Succeeded.

Dec  8 14:35:05 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service' requested by ':1.71' (uid=1000 pid=2079 comm="gnome-terminal ")

Dec  8 14:35:05 sun systemd[1569]: Starting GNOME Terminal Server...

Dec  8 14:35:05 sun dbus-daemon[1594]: [session uid=1000 pid=1594] Successfully activated service 'org.gnome.Terminal'

Dec  8 14:35:05 sun systemd[1569]: Started GNOME Terminal Server.

Dec  8 14:35:11 sun pulseaudio[1726]: E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

Dec  8 14:36:13 sun kernel: [  170.302188] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)

Dec  8 14:37:34 sun rtkit-daemon[1737]: Supervising 3 threads of 1 processes of 1 users.

Dec  8 14:37:34 sun rtkit-daemon[1737]: Supervising 3 threads of 1 processes of 1 users.

Dec  8 14:37:34 sun rtkit-daemon[1737]: Supervising 3 threads of 1 processes of 1 users.

Dec  8 14:37:34 sun rtkit-daemon[1737]: Supervising 3 threads of 1 processes of 1 users.

Dec  8 14:37:34 sun rtkit-daemon[1737]: Successfully made thread 3323 of process 3211 (n/a) owned by '1000' RT at priority 10.

Dec  8 14:37:34 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:34 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:34 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:35 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:35 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:36 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:43 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:43 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:48 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:37:48 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:09 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:09 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:10 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:10 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:39 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:39 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:46 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:46 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:50 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:50 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:50 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:50 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:50 sun rtkit-daemon[1737]: Successfully made thread 3948 of process 3810 (n/a) owned by '1000' RT at priority 10.

Dec  8 14:39:50 sun rtkit-daemon[1737]: Supervising 5 threads of 3 processes of 1 users.

Dec  8 14:39:53 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:53 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:53 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:39:53 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:05 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:05 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:11 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:11 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:42 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:42 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:42 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:42 sun rtkit-daemon[1737]: Supervising 4 threads of 2 processes of 1 users.

Dec  8 14:40:42 sun rtkit-daemon[1737]: Successfully made thread 4164 of process 3367 (n/a) owned by '1000' RT at priority 10.

Dec  8 14:40:42 sun rtkit-daemon[1737]: Supervising 5 threads of 3 processes of 1 users.

Dec  8 14:43:05 sun dbus-daemon[739]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.267' (uid=0 pid=4443 comm="/usr/bin/gdbus call --system --dest org.freedeskto")

Dec  8 14:43:05 sun systemd[1]: Starting PackageKit Daemon...

Dec  8 14:43:05 sun PackageKit: daemon start

Dec  8 14:43:05 sun dbus-daemon[739]: [system] Successfully activated service 'org.freedesktop.PackageKit'

Dec  8 14:43:05 sun systemd[1]: Started PackageKit Daemon.

Dec  8 14:44:14 sun dbus-daemon[739]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service' requested by ':1.269' (uid=1000 pid=4465 comm="/usr/lib/chromium/chromium --show-component-extens")

Dec  8 14:44:14 sun systemd[1]: Condition check resulted in Bluetooth service being skipped.

Dec  8 14:48:10 sun PackageKit: daemon quit

Dec  8 14:48:10 sun systemd[1]: packagekit.service: Main process exited, code=killed, status=15/TERM

Dec  8 14:48:10 sun systemd[1]: packagekit.service: Succeeded.

Dec  8 14:48:54 sun systemd[1]: Starting Cleanup of Temporary Directories...

Dec  8 14:48:54 sun systemd-tmpfiles[4814]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:1] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher → /run/speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:48:54 sun systemd-tmpfiles[4814]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:2] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.cache → /run/speech-dispatcher/.cache; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:48:54 sun systemd-tmpfiles[4814]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:3] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.speech-dispatcher → /run/speech-dispatcher/.speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:48:54 sun systemd-tmpfiles[4814]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:4] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/.cache/speech-dispatcher → /run/speech-dispatcher/.cache/speech-dispatcher; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:48:54 sun systemd-tmpfiles[4814]: [/usr/lib/tmpfiles.d/speech-dispatcher.conf:5] Line references path below legacy directory /var/run/, updating /var/run/speech-dispatcher/log → /run/speech-dispatcher/log; please update the tmpfiles.d/ drop-in file accordingly.

Dec  8 14:48:54 sun systemd[1]: systemd-tmpfiles-clean.service: Succeeded.

Dec  8 14:48:54 sun systemd[1]: Started Cleanup of Temporary Directories.

Dec  8 14:52:42 sun NetworkManager[741]: <info>  [1607435562.5904] manager: sleep: sleep requested (sleeping: no  enabled: yes)

Dec  8 14:52:42 sun NetworkManager[741]: <info>  [1607435562.5907] manager: NetworkManager state is now ASLEEP

Dec  8 14:52:42 sun systemd[1]: Reached target Sleep.

Dec  8 14:52:42 sun systemd[1]: Starting Hibernate...

Dec  8 14:52:42 sun kernel: [ 1159.307617] PM: Image not found (code -22)

Dec  8 14:52:42 sun systemd-sleep[4897]: Suspending system...

Dec  8 14:52:42 sun kernel: [ 1159.309884] PM: hibernation entry

Dec  8 14:52:42 sun kernel: [ 1159.310297] (NULL device *): firmware: direct-loading firmware iwlwifi-2030-6.ucode

Dec  8 14:52:42 sun kernel: [ 1159.310335] PM: Syncing filesystems ...

Au sujet de la pagaille dans les headers du noyau 4.19.0-6... je ne sais quoi dire

Debian Alain · 09-12-2020 10:12:55

au pif , madiwas , tu utilises gnome , non ?

tu as pensé utiliser un bureau plus léger (xfce , par exemple) ?

ton display manager c'est quoi ? gdm ?

 systemctl status display-manager

le type et le nom de ta session :

echo $XDG_SESSION_TYPE && echo $XDG_SESSION_DESKTOP

l'occupation de ton home :

du -hcxd2 /home

mais je suis aussi , avec intérêt , les réflexions de Croutons ...

madiwas , c'est bien ton bureau qui freeze . c'est çà ? et pas avant ?

Dernière modification par Debian Alain (09-12-2020 10:17:40)

madiwas · 09-12-2020 10:17:27

J'utilise Cinnamon

systemctl status display-manager
● lightdm.service - Light Display Manager
Loaded: loaded (/lib/systemd/system/lightdm.service; indirect; vendor preset: enabled)
Active: active (running) since Tue 2020-12-08 14:34:32 CET; 19h ago
Docs: man:lightdm(1)
Process: 864 ExecStartPre=/bin/sh -c [ "$(cat /etc/X11/default-display-manager 2>/dev/null)" = "/usr/sbin/lightdm" ] (code=exited, status=0/SUCCESS)
Main PID: 878 (lightdm)
Tasks: 7 (limit: 4915)
Memory: 101.3M
CGroup: /system.slice/lightdm.service
├─878 /usr/sbin/lightdm
└─918 /usr/lib/xorg/Xorg :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch

x11
lightdm-xsession

Je ne me pleins aucunement de PB d'espace et de rapidité de mon OS, tout va bien de ce côté la i5 avec 2 SSD RAS pour cela !

Debian Alain · 09-12-2020 10:25:48

madiwas a écrit :

Je ne me pleins aucunement de PB d'espace et de rapidité de mon OS, tout va bien de ce côté la i5 avec 2 SSD RAS pour cela !

si j'ai bien lu , (post #15) , tes disques sont qd mme bien pleins (97 % pour chacun de tes deux disques)

sachant que linux réserve toujours une marge de sécurité sur ses disques (5 % , je crois) ,
j'aurai tendance à dire que tes disques sont saturés .

systeme plein = pas de place pour travailler = freeze

enfin , je pense .

Dernière modification par Debian Alain (09-12-2020 10:26:52)

Debian-facile

#1 07-12-2020 22:08:49

Écran noir après grub

#2 07-12-2020 22:24:37

Re : Écran noir après grub

#3 08-12-2020 07:53:09

Re : Écran noir après grub

#4 08-12-2020 09:15:06

Re : Écran noir après grub

#5 08-12-2020 09:30:03

Re : Écran noir après grub

#6 08-12-2020 09:43:02

Re : Écran noir après grub

#7 08-12-2020 10:41:58

Re : Écran noir après grub

#8 08-12-2020 10:52:50

Re : Écran noir après grub

#9 08-12-2020 11:01:58

Re : Écran noir après grub

#10 08-12-2020 11:09:39

Re : Écran noir après grub

#11 08-12-2020 13:53:51

Re : Écran noir après grub

#12 08-12-2020 14:19:53

Re : Écran noir après grub

#13 08-12-2020 14:27:51

Re : Écran noir après grub

#14 08-12-2020 14:40:43

Re : Écran noir après grub

#15 08-12-2020 14:46:24

Re : Écran noir après grub

#16 08-12-2020 15:10:35

Re : Écran noir après grub

#17 08-12-2020 21:30:29

Re : Écran noir après grub

#18 09-12-2020 08:38:56

Re : Écran noir après grub

#19 09-12-2020 09:20:09

Re : Écran noir après grub

#20 09-12-2020 09:30:47

Re : Écran noir après grub

#21 09-12-2020 09:35:56

Re : Écran noir après grub

#22 09-12-2020 09:48:17

Re : Écran noir après grub

#23 09-12-2020 10:12:55

Re : Écran noir après grub

#24 09-12-2020 10:17:27

Re : Écran noir après grub

#25 09-12-2020 10:25:48

Re : Écran noir après grub

Pied de page des forums