Bon maintenant que je suis sous testing, je remet l'ensemble des commandes habituelles :
uname -a
Linux taonix 5.10.0-6-amd64 #1 SMP Debian 5.10.28-1 (2021-04-09) x86_64 GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 05)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
00:17.0 SATA controller: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #4 (rev f1)
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation HM175 Chipset LPC/eSPI Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106M [GeForce GTX 1060 Mobile] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP106 High Definition Audio Controller (rev a1)
02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961/SM963
lspci -v
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
Subsystem: Lenovo Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
Flags: bus master, fast devsel, latency 0, IOMMU group 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 05) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 122, IOMMU group 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: a3000000-a40fffff [size=17M]
Prefetchable memory behind bridge: 0000000090000000-00000000a1ffffff [size=288M]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04) (prog-if 00 [VGA controller])
Subsystem: Lenovo HD Graphics 630
Flags: bus master, fast devsel, latency 0, IRQ 135, IOMMU group 2
Memory at a2000000 (64-bit, non-prefetchable) [size=16M]
Memory at b0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31) (prog-if 30 [XHCI])
Subsystem: Lenovo 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 127, IOMMU group 3
Memory at a4610000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
Subsystem: Lenovo 100 Series/C230 Series Chipset Family Thermal Subsystem
Flags: bus master, fast devsel, latency 0, IRQ 18, IOMMU group 3
Memory at a462a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
Subsystem: Lenovo 100 Series/C230 Series Chipset Family MEI Controller
Flags: bus master, fast devsel, latency 0, IRQ 136, IOMMU group 4
Memory at a462b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo HM170/QM170 Chipset SATA Controller [AHCI Mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 126, IOMMU group 5
Memory at a4628000 (32-bit, non-prefetchable) [size=8K]
Memory at a462e000 (32-bit, non-prefetchable) [size=256]
I/O ports at 5080 [size=8]
I/O ports at 5088 [size=4]
I/O ports at 5060 [size=32]
Memory at a462c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 123, IOMMU group 6
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: a4200000-a43fffff [size=2M]
Prefetchable memory behind bridge: [disabled]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #4 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 124, IOMMU group 7
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: a4500000-a45fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 125, IOMMU group 8
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: a4400000-a44fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation HM175 Chipset LPC/eSPI Controller (rev 31)
Subsystem: Lenovo HM175 Chipset LPC/eSPI Controller
Flags: bus master, medium devsel, latency 0, IOMMU group 9
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
Subsystem: Lenovo 100 Series/C230 Series Chipset Family Power Management Controller
Flags: bus master, fast devsel, latency 0, IOMMU group 9
Memory at a4624000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
Subsystem: Lenovo CM238 HD Audio Controller
Flags: bus master, fast devsel, latency 32, IRQ 137, IOMMU group 9
Memory at a4620000 (64-bit, non-prefetchable) [size=16K]
Memory at a4600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
Subsystem: Lenovo 100 Series/C230 Series Chipset Family SMBus
Flags: medium devsel, IRQ 16, IOMMU group 9
Memory at a462d000 (64-bit, non-prefetchable) [size=256]
I/O ports at 5040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation GP106M [GeForce GTX 1060 Mobile] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo GeForce GTX 1060 Max-Q 3GB
Flags: bus master, fast devsel, latency 0, IRQ 134, IOMMU group 1
Memory at a3000000 (32-bit, non-prefetchable) [size=16M]
Memory at 90000000 (64-bit, prefetchable) [size=256M]
Memory at a0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at a4080000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device: NVIDIA Corporation GP106 High Definition Audio Controller (rev a1)
Flags: bus master, fast devsel, latency 0, IRQ 17, IOMMU group 1
Memory at a4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
Subsystem: Lenovo Qualcomm Atheros QCA9377 Wireless Network Adapter
Flags: bus master, fast devsel, latency 0, IRQ 138, IOMMU group 10
Memory at a4200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 19, IOMMU group 11
I/O ports at 3000 [size=256]
Memory at a4504000 (64-bit, non-prefetchable) [size=4K]
Memory at a4500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961/SM963 (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd SM963 2.5" NVMe PCIe SSD
Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0, IOMMU group 12
Memory at a4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.05*+ 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1440x900 59.89
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1360x768 59.80 59.96
1280x800 59.99 59.97 59.81 59.91
1152x864 60.00
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
800x512 60.17
700x525 59.98
800x450 59.95 59.82
640x512 60.02
720x450 59.89
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
680x384 59.80 59.96
640x400 59.88 59.98
576x432 60.06
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DRI_PRIME=0 xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.05*+ 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1440x900 59.89
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1360x768 59.80 59.96
1280x800 59.99 59.97 59.81 59.91
1152x864 60.00
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
800x512 60.17
700x525 59.98
800x450 59.95 59.82
640x512 60.02
720x450 59.89
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
680x384 59.80 59.96
640x400 59.88 59.98
576x432 60.06
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DRI_PRIME=1 xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.05*+ 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1440x900 59.89
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1360x768 59.80 59.96
1280x800 59.99 59.97 59.81 59.91
1152x864 60.00
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
800x512 60.17
700x525 59.98
800x450 59.95 59.82
640x512 60.02
720x450 59.89
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
680x384 59.80 59.96
640x400 59.88 59.98
576x432 60.06
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
sudo dmesg
[ 0.000000] microcode: microcode updated early to revision 0xde, date = 2020-05-26
[ 0.000000] Linux version 5.10.0-6-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.28-1 (2021-04-09)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-6-amd64 root=UUID=c4d525e1-a349-48b2-b1b8-4a0852fb5802 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000062ddafff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000062ddb000-0x0000000062ddbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000062ddc000-0x0000000062ddcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000062ddd000-0x000000007a48dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a48e000-0x000000007a68dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007a68e000-0x000000007ae7dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ae7e000-0x000000007ce7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ce7e000-0x000000007cefdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007cefe000-0x000000007cefefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ceff000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x7cefd014 SMBIOS=0x7a702000 SMBIOS 3.0=0x7a700000 ESRT=0x7a6fe558 MEMATTR=0x6ad4d018
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LENOVO 80YY/LNVNB161216, BIOS 5XCN26WW 12/20/2018
[ 0.000000] tsc: Detected 2500.000 MHz processor
[ 0.000000] tsc: Detected 2499.952 MHz TSC
[ 0.000563] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000566] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000573] last_pfn = 0x47f000 max_arch_pfn = 0x400000000
[ 0.000577] MTRR default type: write-back
[ 0.000578] MTRR fixed ranges enabled:
[ 0.000579] 00000-9FFFF write-back
[ 0.000580] A0000-BFFFF uncachable
[ 0.000581] C0000-FFFFF write-protect
[ 0.000582] MTRR variable ranges enabled:
[ 0.000584] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000585] 1 base 007E000000 mask 7FFE000000 uncachable
[ 0.000586] 2 base 007D800000 mask 7FFF800000 uncachable
[ 0.000587] 3 disabled
[ 0.000587] 4 disabled
[ 0.000588] 5 disabled
[ 0.000588] 6 disabled
[ 0.000589] 7 disabled
[ 0.000590] 8 disabled
[ 0.000590] 9 disabled
[ 0.000946] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001217] last_pfn = 0x7ceff max_arch_pfn = 0x400000000
[ 0.010045] ACPI: Early table checksum verification disabled
[ 0.010047] ACPI: RSDP 0x000000007CEFD014 000024 (v02 LENOVO)
[ 0.010051] ACPI: XSDT 0x000000007CECC188 00010C (v01 LENOVO CB-01 00000001 01000013)
[ 0.010057] ACPI: FACP 0x000000007CEEE000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010062] ACPI: DSDT 0x000000007CED5000 015C9C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010065] ACPI: FACS 0x000000007CE4D000 000040
[ 0.010068] ACPI: UEFI 0x000000007CEFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010071] ACPI: UEFI 0x000000007CEFB000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010074] ACPI: MSDM 0x000000007CEFA000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010077] ACPI: SSDT 0x000000007CEF9000 0004C3 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010080] ACPI: SSDT 0x000000007CEF8000 000046 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010083] ACPI: TPM2 0x000000007CEF7000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010086] ACPI: SSDT 0x000000007CEF3000 0030A0 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010089] ACPI: ASF! 0x000000007CEF2000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010092] ACPI: ASPT 0x000000007CEF1000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010095] ACPI: BOOT 0x000000007CEF0000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010098] ACPI: DBGP 0x000000007CEEF000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010100] ACPI: HPET 0x000000007CEED000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010103] ACPI: APIC 0x000000007CEEC000 0000BC (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010106] ACPI: MCFG 0x000000007CEEB000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010109] ACPI: LPIT 0x000000007CED4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010112] ACPI: WSMT 0x000000007CED3000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010115] ACPI: SSDT 0x000000007CED2000 00029F (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010118] ACPI: SSDT 0x000000007CED1000 000346 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010121] ACPI: SSDT 0x000000007CECD000 003002 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010124] ACPI: SSDT 0x000000007CECB000 00051E (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010127] ACPI: DBGP 0x000000007CECA000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010130] ACPI: DBG2 0x000000007CEC9000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010133] ACPI: SSDT 0x000000007CEC8000 0002F5 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010136] ACPI: SSDT 0x000000007CEC7000 000EDE (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010138] ACPI: SSDT 0x000000007CEC2000 004743 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010141] ACPI: DMAR 0x000000007CEC1000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010144] ACPI: FPDT 0x000000007CEC0000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010147] ACPI: BGRT 0x000000007CEBF000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.010150] ACPI: Reserving FACP table memory at [mem 0x7ceee000-0x7ceee10b]
[ 0.010151] ACPI: Reserving DSDT table memory at [mem 0x7ced5000-0x7ceeac9b]
[ 0.010152] ACPI: Reserving FACS table memory at [mem 0x7ce4d000-0x7ce4d03f]
[ 0.010153] ACPI: Reserving UEFI table memory at [mem 0x7cefc000-0x7cefc235]
[ 0.010154] ACPI: Reserving UEFI table memory at [mem 0x7cefb000-0x7cefb041]
[ 0.010155] ACPI: Reserving MSDM table memory at [mem 0x7cefa000-0x7cefa054]
[ 0.010155] ACPI: Reserving SSDT table memory at [mem 0x7cef9000-0x7cef94c2]
[ 0.010156] ACPI: Reserving SSDT table memory at [mem 0x7cef8000-0x7cef8045]
[ 0.010157] ACPI: Reserving TPM2 table memory at [mem 0x7cef7000-0x7cef7033]
[ 0.010158] ACPI: Reserving SSDT table memory at [mem 0x7cef3000-0x7cef609f]
[ 0.010159] ACPI: Reserving ASF! table memory at [mem 0x7cef2000-0x7cef20a4]
[ 0.010160] ACPI: Reserving ASPT table memory at [mem 0x7cef1000-0x7cef1033]
[ 0.010160] ACPI: Reserving BOOT table memory at [mem 0x7cef0000-0x7cef0027]
[ 0.010161] ACPI: Reserving DBGP table memory at [mem 0x7ceef000-0x7ceef033]
[ 0.010162] ACPI: Reserving HPET table memory at [mem 0x7ceed000-0x7ceed037]
[ 0.010163] ACPI: Reserving APIC table memory at [mem 0x7ceec000-0x7ceec0bb]
[ 0.010164] ACPI: Reserving MCFG table memory at [mem 0x7ceeb000-0x7ceeb03b]
[ 0.010165] ACPI: Reserving LPIT table memory at [mem 0x7ced4000-0x7ced4093]
[ 0.010166] ACPI: Reserving WSMT table memory at [mem 0x7ced3000-0x7ced3027]
[ 0.010167] ACPI: Reserving SSDT table memory at [mem 0x7ced2000-0x7ced229e]
[ 0.010167] ACPI: Reserving SSDT table memory at [mem 0x7ced1000-0x7ced1345]
[ 0.010168] ACPI: Reserving SSDT table memory at [mem 0x7cecd000-0x7ced0001]
[ 0.010169] ACPI: Reserving SSDT table memory at [mem 0x7cecb000-0x7cecb51d]
[ 0.010170] ACPI: Reserving DBGP table memory at [mem 0x7ceca000-0x7ceca033]
[ 0.010171] ACPI: Reserving DBG2 table memory at [mem 0x7cec9000-0x7cec9053]
[ 0.010172] ACPI: Reserving SSDT table memory at [mem 0x7cec8000-0x7cec82f4]
[ 0.010173] ACPI: Reserving SSDT table memory at [mem 0x7cec7000-0x7cec7edd]
[ 0.010174] ACPI: Reserving SSDT table memory at [mem 0x7cec2000-0x7cec6742]
[ 0.010175] ACPI: Reserving DMAR table memory at [mem 0x7cec1000-0x7cec10a7]
[ 0.010176] ACPI: Reserving FPDT table memory at [mem 0x7cec0000-0x7cec0043]
[ 0.010177] ACPI: Reserving BGRT table memory at [mem 0x7cebf000-0x7cebf037]
[ 0.010181] esrt: Reserving ESRT space from 0x000000007a6fe558 to 0x000000007a6fe608.
[ 0.010191] Using GB pages for direct mapping
[ 0.010572] RAMDISK: [mem 0x322e5000-0x35169fff]
[ 0.010583] ACPI: Local APIC address 0xfee00000
[ 0.010682] No NUMA configuration found
[ 0.010683] Faking a node at [mem 0x0000000000000000-0x000000047effffff]
[ 0.010697] NODE_DATA(0) allocated [mem 0x47efd6000-0x47effffff]
[ 0.011033] Zone ranges:
[ 0.011034] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011036] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011037] Normal [mem 0x0000000100000000-0x000000047effffff]
[ 0.011039] Device empty
[ 0.011040] Movable zone start for each node
[ 0.011043] Early memory node ranges
[ 0.011044] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.011045] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.011046] node 0: [mem 0x0000000000100000-0x0000000062ddafff]
[ 0.011047] node 0: [mem 0x0000000062ddd000-0x000000007a48dfff]
[ 0.011048] node 0: [mem 0x000000007cefe000-0x000000007cefefff]
[ 0.011049] node 0: [mem 0x0000000100000000-0x000000047effffff]
[ 0.011051] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff]
[ 0.011053] On node 0 totalpages: 4166697
[ 0.011054] DMA zone: 64 pages used for memmap
[ 0.011055] DMA zone: 22 pages reserved
[ 0.011056] DMA zone: 3996 pages, LIFO batch:0
[ 0.011337] DMA zone: 28772 pages in unavailable ranges
[ 0.011338] DMA32 zone: 7763 pages used for memmap
[ 0.011339] DMA32 zone: 496781 pages, LIFO batch:63
[ 0.015199] DMA32 zone: 23411 pages in unavailable ranges
[ 0.015200] Normal zone: 57280 pages used for memmap
[ 0.015201] Normal zone: 3665920 pages, LIFO batch:63
[ 0.015495] Normal zone: 4096 pages in unavailable ranges
[ 0.015518] Reserving Intel graphics memory at [mem 0x7e000000-0x7fffffff]
[ 0.015903] ACPI: PM-Timer IO Port: 0x1808
[ 0.015905] ACPI: Local APIC address 0xfee00000
[ 0.015910] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.015911] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.015912] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.015913] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.015913] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.015914] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.015915] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.015916] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.015943] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.015945] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.015946] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.015948] ACPI: IRQ0 used by override.
[ 0.015949] ACPI: IRQ9 used by override.
[ 0.015951] Using ACPI (MADT) for SMP configuration information
[ 0.015952] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.015959] e820: update [mem 0x6ac4c000-0x6ad3ffff] usable ==> reserved
[ 0.015969] TSC deadline timer available
[ 0.015970] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.015997] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.016000] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.016002] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.016003] PM: hibernation: Registered nosave memory: [mem 0x62ddb000-0x62ddbfff]
[ 0.016004] PM: hibernation: Registered nosave memory: [mem 0x62ddc000-0x62ddcfff]
[ 0.016006] PM: hibernation: Registered nosave memory: [mem 0x6ac4c000-0x6ad3ffff]
[ 0.016008] PM: hibernation: Registered nosave memory: [mem 0x7a48e000-0x7a68dfff]
[ 0.016009] PM: hibernation: Registered nosave memory: [mem 0x7a68e000-0x7ae7dfff]
[ 0.016009] PM: hibernation: Registered nosave memory: [mem 0x7ae7e000-0x7ce7dfff]
[ 0.016010] PM: hibernation: Registered nosave memory: [mem 0x7ce7e000-0x7cefdfff]
[ 0.016012] PM: hibernation: Registered nosave memory: [mem 0x7ceff000-0x7fffffff]
[ 0.016013] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.016014] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.016014] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[ 0.016015] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.016016] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ 0.016016] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.016017] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.016018] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.016018] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.016019] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.016020] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.016021] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.016021] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.016022] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.016023] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.016023] PM: hibernation: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.016025] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.016026] Booting paravirtualized kernel on bare hardware
[ 0.016029] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.020851] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.021005] percpu: Embedded 54 pages/cpu s183960 r8192 d29032 u524288
[ 0.021013] pcpu-alloc: s183960 r8192 d29032 u524288 alloc=1*2097152
[ 0.021014] pcpu-alloc: [0] 0 1 2 3
[ 0.021049] Built 1 zonelists, mobility grouping on. Total pages: 4101568
[ 0.021050] Policy zone: Normal
[ 0.021051] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-6-amd64 root=UUID=c4d525e1-a349-48b2-b1b8-4a0852fb5802 ro quiet
[ 0.021945] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.022368] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.022414] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.035394] Memory: 1990404K/16666788K available (12295K kernel code, 2544K rwdata, 7548K rodata, 2388K init, 3712K bss, 466600K reserved, 0K cma-reserved)
[ 0.035401] random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0
[ 0.035518] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.035531] Kernel/User page tables isolation: enabled
[ 0.035549] ftrace: allocating 36387 entries in 143 pages
[ 0.048716] ftrace: allocated 143 pages with 5 groups
[ 0.048810] rcu: Hierarchical RCU implementation.
[ 0.048812] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.048813] Rude variant of Tasks RCU enabled.
[ 0.048814] Tracing variant of Tasks RCU enabled.
[ 0.048814] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.048815] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.052665] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.053161] random: crng done (trusting CPU's manufacturer)
[ 0.053183] Console: colour dummy device 80x25
[ 0.053199] printk: console [tty0] enabled
[ 0.053216] ACPI: Core revision 20200925
[ 0.053495] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.053577] APIC: Switch to symmetric I/O mode setup
[ 0.053579] DMAR: Host address width 39
[ 0.053580] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.053586] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.053587] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.053590] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.053591] DMAR: RMRR base: 0x0000007ad72000 end: 0x0000007ad91fff
[ 0.053592] DMAR: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
[ 0.053594] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.053595] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.053596] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.055080] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.055082] x2apic enabled
[ 0.055096] Switched APIC routing to cluster x2apic.
[ 0.059065] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077497] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x24090c9bc00, max_idle_ns: 440795288559 ns
[ 0.077501] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.90 BogoMIPS (lpj=9999808)
[ 0.077504] pid_max: default: 32768 minimum: 301
[ 0.079968] LSM: Security Framework initializing
[ 0.079984] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.080008] AppArmor: AppArmor initialized
[ 0.080010] TOMOYO Linux initialized
[ 0.080045] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.080068] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.080351] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.080374] process: using mwait in idle threads
[ 0.080377] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.080378] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.080381] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.080382] Spectre V2 : Mitigation: Full generic retpoline
[ 0.080383] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.080383] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.080385] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.080386] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.080391] SRBDS: Mitigation: Microcode
[ 0.080391] MDS: Mitigation: Clear CPU buffers
[ 0.080551] Freeing SMP alternatives memory: 32K
[ 0.084122] smpboot: CPU0: Intel(R) Core(TM) i5-7300HQ CPU @ 2.50GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.084304] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.084317] ... version: 4
[ 0.084317] ... bit width: 48
[ 0.084318] ... generic registers: 8
[ 0.084319] ... value mask: 0000ffffffffffff
[ 0.084319] ... max period: 00007fffffffffff
[ 0.084320] ... fixed-purpose events: 3
[ 0.084321] ... event mask: 00000007000000ff
[ 0.084426] rcu: Hierarchical SRCU implementation.
[ 0.085014] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.085064] smp: Bringing up secondary CPUs ...
[ 0.085141] x86: Booting SMP configuration:
[ 0.085142] .... node #0, CPUs: #1 #2 #3
[ 0.090015] smp: Brought up 1 node, 4 CPUs
[ 0.090015] smpboot: Max logical packages: 1
[ 0.090015] smpboot: Total of 4 processors activated (19999.61 BogoMIPS)
[ 0.107769] node 0 deferred pages initialised in 16ms
[ 0.108223] devtmpfs: initialized
[ 0.108223] x86/mm: Memory block size: 128MB
[ 0.109767] PM: Registering ACPI NVS region [mem 0x62ddb000-0x62ddbfff] (4096 bytes)
[ 0.109767] PM: Registering ACPI NVS region [mem 0x7ae7e000-0x7ce7dfff] (33554432 bytes)
[ 0.110034] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.110044] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.110090] pinctrl core: initialized pinctrl subsystem
[ 0.110263] NET: Registered protocol family 16
[ 0.110338] audit: initializing netlink subsys (disabled)
[ 0.110347] audit: type=2000 audit(1618828657.056:1): state=initialized audit_enabled=0 res=1
[ 0.110347] thermal_sys: Registered thermal governor 'fair_share'
[ 0.110347] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.110347] thermal_sys: Registered thermal governor 'step_wise'
[ 0.110347] thermal_sys: Registered thermal governor 'user_space'
[ 0.110347] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.110347] cpuidle: using governor ladder
[ 0.110347] cpuidle: using governor menu
[ 0.110347] Simple Boot Flag at 0x44 set to 0x1
[ 0.110347] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.110347] ACPI: bus type PCI registered
[ 0.110347] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.110347] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.110347] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.110347] PCI: Using configuration type 1 for base access
[ 0.110544] Kprobes globally optimized
[ 0.110547] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.110547] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.249755] ACPI: Added _OSI(Module Device)
[ 0.249755] ACPI: Added _OSI(Processor Device)
[ 0.249755] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.249755] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.249755] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.249755] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.249755] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.280681] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.282772] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.286854] ACPI: Dynamic OEM Table Load:
[ 0.286866] ACPI: SSDT 0xFFFF8A3B40B61800 0005EE (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.287986] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.288924] ACPI: Dynamic OEM Table Load:
[ 0.288932] ACPI: SSDT 0xFFFF8A3D2CCFF400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.290307] ACPI: Dynamic OEM Table Load:
[ 0.290315] ACPI: SSDT 0xFFFF8A3B40B63000 00065C (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.291697] ACPI: Dynamic OEM Table Load:
[ 0.291704] ACPI: SSDT 0xFFFF8A3D2CCFA000 00018A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.293970] ACPI: EC: EC started
[ 0.293970] ACPI: EC: interrupt blocked
[ 0.294227] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.294229] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.294229] ACPI: Interpreter enabled
[ 0.294278] ACPI: (supports S0 S3 S4 S5)
[ 0.294279] ACPI: Using IOAPIC for interrupt routing
[ 0.294316] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.294925] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.295864] ACPI: Power Resource [PG00] (on)
[ 0.314421] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.314426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.317358] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.317359] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.319520] PCI host bridge to bus 0000:00
[ 0.319522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.319524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.319526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.319527] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.319528] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.319529] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.319530] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.319531] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.319532] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.319533] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.319534] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.319535] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.319536] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.319537] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.319551] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[ 0.320453] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.320500] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.321420] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[ 0.321429] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[ 0.321435] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.321439] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.321455] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.322437] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.322464] pci 0000:00:14.0: reg 0x10: [mem 0xa4610000-0xa461ffff 64bit]
[ 0.322566] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.323567] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.323594] pci 0000:00:14.2: reg 0x10: [mem 0xa462a000-0xa462afff 64bit]
[ 0.324599] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.324623] pci 0000:00:16.0: reg 0x10: [mem 0xa462b000-0xa462bfff 64bit]
[ 0.324708] pci 0000:00:16.0: PME# supported from D3hot
[ 0.325666] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[ 0.325687] pci 0000:00:17.0: reg 0x10: [mem 0xa4628000-0xa4629fff]
[ 0.325699] pci 0000:00:17.0: reg 0x14: [mem 0xa462e000-0xa462e0ff]
[ 0.325710] pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087]
[ 0.325721] pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b]
[ 0.325733] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
[ 0.325744] pci 0000:00:17.0: reg 0x24: [mem 0xa462c000-0xa462c7ff]
[ 0.325808] pci 0000:00:17.0: PME# supported from D3hot
[ 0.326761] pci 0000:00:1c.0: [8086:a112] type 01 class 0x060400
[ 0.326903] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.326931] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 0.327909] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.328046] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.328071] pci 0000:00:1c.3: Intel SPT PCH root port ACS workaround enabled
[ 0.329047] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.329187] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.329213] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 0.330200] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[ 0.331218] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.331237] pci 0000:00:1f.2: reg 0x10: [mem 0xa4624000-0xa4627fff]
[ 0.332225] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[ 0.332252] pci 0000:00:1f.3: reg 0x10: [mem 0xa4620000-0xa4623fff 64bit]
[ 0.332291] pci 0000:00:1f.3: reg 0x20: [mem 0xa4600000-0xa460ffff 64bit]
[ 0.332349] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.333333] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.333390] pci 0000:00:1f.4: reg 0x10: [mem 0xa462d000-0xa462d0ff 64bit]
[ 0.333460] pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f]
[ 0.334496] pci 0000:01:00.0: [10de:1c20] type 00 class 0x030000
[ 0.334506] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[ 0.334513] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.334521] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[ 0.334526] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.334532] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.334546] pci 0000:01:00.0: Enabling HDA controller
[ 0.334673] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[ 0.334682] pci 0000:01:00.1: reg 0x10: [mem 0xa4000000-0xa4003fff]
[ 0.334791] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.334793] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.334795] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
[ 0.334798] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.335053] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[ 0.335106] pci 0000:02:00.0: reg 0x10: [mem 0xa4200000-0xa43fffff 64bit]
[ 0.335410] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.335854] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.335861] pci 0000:00:1c.0: bridge window [mem 0xa4200000-0xa43fffff]
[ 0.335952] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.335973] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.336001] pci 0000:03:00.0: reg 0x18: [mem 0xa4504000-0xa4504fff 64bit]
[ 0.336018] pci 0000:03:00.0: reg 0x20: [mem 0xa4500000-0xa4503fff 64bit]
[ 0.336151] pci 0000:03:00.0: supports D1 D2
[ 0.336153] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.336333] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.336337] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.336342] pci 0000:00:1c.3: bridge window [mem 0xa4500000-0xa45fffff]
[ 0.336436] pci 0000:04:00.0: [144d:a804] type 00 class 0x010802
[ 0.336463] pci 0000:04:00.0: reg 0x10: [mem 0xa4400000-0xa4403fff 64bit]
[ 0.336822] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.336829] pci 0000:00:1d.0: bridge window [mem 0xa4400000-0xa44fffff]
[ 0.338023] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.338078] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.338130] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.338182] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.338233] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.338284] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.338336] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.338387] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.338871] ACPI: EC: interrupt unblocked
[ 0.338871] ACPI: EC: event unblocked
[ 0.338884] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.338885] ACPI: EC: GPE=0x2
[ 0.338887] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.338888] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.338938] iommu: Default domain type: Translated
[ 0.338950] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.338950] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.338950] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.338950] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.338950] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.338950] vgaarb: loaded
[ 0.338950] EDAC MC: Ver: 3.0.0
[ 0.338950] Registered efivars operations
[ 0.338950] NetLabel: Initializing
[ 0.338950] NetLabel: domain hash size = 128
[ 0.338950] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.338950] NetLabel: unlabeled traffic allowed by default
[ 0.338950] PCI: Using ACPI for IRQ routing
[ 0.367433] PCI: pci_cache_line_size set to 64 bytes
[ 0.367740] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.367741] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.367742] e820: reserve RAM buffer [mem 0x62ddb000-0x63ffffff]
[ 0.367743] e820: reserve RAM buffer [mem 0x6ac4c000-0x6bffffff]
[ 0.367743] e820: reserve RAM buffer [mem 0x7a48e000-0x7bffffff]
[ 0.367744] e820: reserve RAM buffer [mem 0x7ceff000-0x7fffffff]
[ 0.367745] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[ 0.368456] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.368462] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.369517] clocksource: Switched to clocksource tsc-early
[ 0.378648] VFS: Disk quotas dquot_6.6.0
[ 0.378661] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.378766] AppArmor: AppArmor Filesystem Enabled
[ 0.378781] pnp: PnP ACPI init
[ 0.378914] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.378915] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.378917] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.378918] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.378919] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.378920] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.378922] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.378926] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.379243] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.379246] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.379438] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.379439] system 00:02: [io 0xffff] has been reserved
[ 0.379440] system 00:02: [io 0xffff] has been reserved
[ 0.379441] system 00:02: [io 0xffff] has been reserved
[ 0.379443] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.379444] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.379447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.379539] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.379542] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.379561] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.379596] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.379599] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.379630] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.379649] pnp 00:07: Plug and Play ACPI device, IDs SYN2b96 PNP0f03 (active)
[ 0.380808] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.380809] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.380811] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.380814] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.381330] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.381332] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.381333] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.381334] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.381335] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.381337] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.381338] system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.381340] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.381341] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.381342] system 00:09: [mem 0x80000000-0x8001ffff] has been reserved
[ 0.381345] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.381626] pnp: PnP ACPI: found 10 devices
[ 0.387241] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.387300] NET: Registered protocol family 2
[ 0.387431] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.387510] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.387685] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.387796] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.387834] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.387879] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.387966] NET: Registered protocol family 1
[ 0.387970] NET: Registered protocol family 44
[ 0.387974] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.387985] pci 0000:01:00.0: BAR 6: assigned [mem 0xa4080000-0xa40fffff pref]
[ 0.387986] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.387988] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.387991] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
[ 0.387993] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.387996] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.388002] pci 0000:00:1c.0: bridge window [mem 0xa4200000-0xa43fffff]
[ 0.388012] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.388015] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.388020] pci 0000:00:1c.3: bridge window [mem 0xa4500000-0xa45fffff]
[ 0.388030] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.388036] pci 0000:00:1d.0: bridge window [mem 0xa4400000-0xa44fffff]
[ 0.388047] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.388048] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.388049] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.388050] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.388051] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.388052] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.388053] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.388054] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.388055] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.388056] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.388057] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.388058] pci_bus 0000:00: resource 15 [mem 0x80000000-0xdfffffff window]
[ 0.388059] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[ 0.388060] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.388061] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[ 0.388062] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.388063] pci_bus 0000:02: resource 1 [mem 0xa4200000-0xa43fffff]
[ 0.388065] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.388065] pci_bus 0000:03: resource 1 [mem 0xa4500000-0xa45fffff]
[ 0.388067] pci_bus 0000:04: resource 1 [mem 0xa4400000-0xa44fffff]
[ 0.388190] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.389914] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.390069] PCI: CLS 64 bytes, default 64
[ 0.390130] Trying to unpack rootfs image as initramfs...
[ 1.183894] Freeing initrd memory: 47636K
[ 1.183937] DMAR: No ATSR found
[ 1.183970] DMAR: dmar0: Using Queued invalidation
[ 1.183973] DMAR: dmar1: Using Queued invalidation
[ 1.184419] pci 0000:00:00.0: Adding to iommu group 0
[ 1.184432] pci 0000:00:01.0: Adding to iommu group 1
[ 1.184440] pci 0000:00:02.0: Adding to iommu group 2
[ 1.184457] pci 0000:00:14.0: Adding to iommu group 3
[ 1.184464] pci 0000:00:14.2: Adding to iommu group 3
[ 1.184474] pci 0000:00:16.0: Adding to iommu group 4
[ 1.184482] pci 0000:00:17.0: Adding to iommu group 5
[ 1.184494] pci 0000:00:1c.0: Adding to iommu group 6
[ 1.184503] pci 0000:00:1c.3: Adding to iommu group 7
[ 1.184513] pci 0000:00:1d.0: Adding to iommu group 8
[ 1.184533] pci 0000:00:1f.0: Adding to iommu group 9
[ 1.184541] pci 0000:00:1f.2: Adding to iommu group 9
[ 1.184550] pci 0000:00:1f.3: Adding to iommu group 9
[ 1.184558] pci 0000:00:1f.4: Adding to iommu group 9
[ 1.184562] pci 0000:01:00.0: Adding to iommu group 1
[ 1.184566] pci 0000:01:00.1: Adding to iommu group 1
[ 1.184576] pci 0000:02:00.0: Adding to iommu group 10
[ 1.184585] pci 0000:03:00.0: Adding to iommu group 11
[ 1.184596] pci 0000:04:00.0: Adding to iommu group 12
[ 1.187108] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.187113] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.187117] software IO TLB: mapped [mem 0x0000000075f15000-0x0000000079f15000] (64MB)
[ 1.187524] Initialise system trusted keyrings
[ 1.187538] Key type blacklist registered
[ 1.187584] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.188654] zbud: loaded
[ 1.188797] integrity: Platform Keyring initialized
[ 1.188798] Key type asymmetric registered
[ 1.188799] Asymmetric key parser 'x509' registered
[ 1.188806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.188836] io scheduler mq-deadline registered
[ 1.189124] pcieport 0000:00:01.0: PME: Signaling with IRQ 122
[ 1.189341] pcieport 0000:00:1c.0: PME: Signaling with IRQ 123
[ 1.189672] pcieport 0000:00:1c.3: PME: Signaling with IRQ 124
[ 1.189902] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125
[ 1.189958] pcieport 0000:00:1d.0: AER: enabled with IRQ 125
[ 1.190054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.190066] efifb: probing for efifb
[ 1.190080] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[ 1.190081] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.190081] efifb: scrolling: redraw
[ 1.190082] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.190155] Console: switching to colour frame buffer device 240x67
[ 1.195412] fb0: EFI VGA frame buffer device
[ 1.195419] intel_idle: MWAIT substates: 0x11142120
[ 1.195420] intel_idle: v0.5.1 model 0x9E
[ 1.195631] intel_idle: Local APIC timer is reliable in all C-states
[ 1.196349] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.197059] Linux agpgart interface v0.103
[ 1.197091] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.197092] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.197398] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.200652] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.200655] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.200824] mousedev: PS/2 mouse device common for all mice
[ 1.200870] rtc_cmos 00:04: RTC can wake from S4
[ 1.201403] rtc_cmos 00:04: registered as rtc0
[ 1.201539] rtc_cmos 00:04: setting system clock to 2021-04-19T10:37:38 UTC (1618828658)
[ 1.201553] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.201560] intel_pstate: Intel P-state driver initializing
[ 1.201968] intel_pstate: Disabling energy efficiency optimization
[ 1.201969] intel_pstate: HWP enabled
[ 1.202088] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.202351] NET: Registered protocol family 10
[ 1.205093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.208685] Segment Routing with IPv6
[ 1.208715] mip6: Mobile IPv6
[ 1.208716] NET: Registered protocol family 17
[ 1.208821] mpls_gso: MPLS GSO support
[ 1.209239] microcode: sig=0x906e9, pf=0x20, revision=0xde
[ 1.209305] microcode: Microcode Update Driver: v2.2.
[ 1.209307] IPI shorthand broadcast: enabled
[ 1.209313] sched_clock: Marking stable (1208616698, 533673)->(1213403075, -4252704)
[ 1.209385] registered taskstats version 1
[ 1.209387] Loading compiled-in X.509 certificates
[ 1.232288] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.232299] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.232315] zswap: loaded using pool lzo/zbud
[ 1.232791] Key type ._fscrypt registered
[ 1.232792] Key type .fscrypt registered
[ 1.232793] Key type fscrypt-provisioning registered
[ 1.232842] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.235493] Freeing unused kernel image (initmem) memory: 2388K
[ 1.254082] Write protecting the kernel read-only data: 22528k
[ 1.254674] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.254877] Freeing unused kernel image (rodata/data gap) memory: 644K
[ 1.306789] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.306790] x86/mm: Checking user space page tables
[ 1.349587] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.349590] Run /init as init process
[ 1.349591] with arguments:
[ 1.349591] /init
[ 1.349592] with environment:
[ 1.349592] HOME=/
[ 1.349593] TERM=linux
[ 1.349593] BOOT_IMAGE=/boot/vmlinuz-5.10.0-6-amd64
[ 1.401126] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.401146] ACPI: Lid Switch [LID0]
[ 1.401179] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.401195] ACPI: Power Button [PWRB]
[ 1.401224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.405032] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 1.405034] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 1.405035] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 1.405036] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[ 1.405195] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 1.413529] ACPI: Power Button [PWRF]
[ 1.419159] SCSI subsystem initialized
[ 1.429145] ACPI: bus type USB registered
[ 1.429160] usbcore: registered new interface driver usbfs
[ 1.429165] usbcore: registered new interface driver hub
[ 1.429171] usbcore: registered new device driver usb
[ 1.435385] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.435479] libata version 3.00 loaded.
[ 1.435677] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.435724] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.436401] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.436809] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.439782] ahci 0000:00:17.0: version 3.0
[ 1.440005] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.440009] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.441137] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 1.441254] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.441439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.441440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441441] usb usb1: Product: xHCI Host Controller
[ 1.441442] usb usb1: Manufacturer: Linux 5.10.0-6-amd64 xhci-hcd
[ 1.441442] usb usb1: SerialNumber: 0000:00:14.0
[ 1.441517] hub 1-0:1.0: USB hub found
[ 1.441551] hub 1-0:1.0: 16 ports detected
[ 1.442059] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.442062] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.442063] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.442091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.442092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442093] usb usb2: Product: xHCI Host Controller
[ 1.442094] usb usb2: Manufacturer: Linux 5.10.0-6-amd64 xhci-hcd
[ 1.442094] usb usb2: SerialNumber: 0000:00:14.0
[ 1.442157] hub 2-0:1.0: USB hub found
[ 1.442176] hub 2-0:1.0: 8 ports detected
[ 1.442277] usb: port power management may be unreliable
[ 1.450034] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x4 impl SATA mode
[ 1.450037] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.451266] nvme nvme0: pci function 0000:04:00.0
[ 1.471607] libphy: r8169: probed
[ 1.471736] r8169 0000:03:00.0 eth0: RTL8168gu/8111gu, 8c:16:45:08:0e:86, XID 509, IRQ 129
[ 1.471738] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.472460] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.472957] scsi host0: ahci
[ 1.473118] scsi host1: ahci
[ 1.476358] scsi host2: ahci
[ 1.476424] ata1: DUMMY
[ 1.476425] ata2: DUMMY
[ 1.476427] ata3: SATA max UDMA/133 abar m2048@0xa462c000 port 0xa462c200 irq 126
[ 1.479629] nvme nvme0: 4/0/0 default/read/poll queues
[ 1.486392] nvme0n1: p1 p2 p3
[ 1.505693] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.525278] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-61)
[ 1.525314] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-61)
[ 1.525475] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 1.525478] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 1.525479] nouveau: detected PR support, will not use DSM
[ 1.525495] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.525685] checking generic (b0000000 7f0000) vs hw (a3000000 1000000)
[ 1.525686] checking generic (b0000000 7f0000) vs hw (90000000 10000000)
[ 1.525687] checking generic (b0000000 7f0000) vs hw (a0000000 2000000)
[ 1.525758] nouveau 0000:01:00.0: NVIDIA GP106 (136000a1)
[ 1.548622] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 1.548624] checking generic (b0000000 7f0000) vs hw (a2000000 1000000)
[ 1.548625] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[ 1.548626] fb0: switching to inteldrmfb from EFI VGA
[ 1.548728] Console: switching to colour dummy device 80x25
[ 1.548795] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.555814] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 1.556077] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 1.556376] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 1.557953] nouveau 0000:01:00.0: bios: version 86.06.51.00.08
[ 1.558231] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/nvdec/scrubber.bin
[ 1.558246] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/bl.bin
[ 1.558259] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/ucode_load.bin
[ 1.558273] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/unload_bl.bin
[ 1.558283] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/ucode_unload.bin
[ 1.558286] nouveau 0000:01:00.0: pmu: firmware unavailable
[ 1.558333] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_bl.bin
[ 1.558349] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_inst.bin
[ 1.558358] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_data.bin
[ 1.558366] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_sig.bin
[ 1.558381] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_bl.bin
[ 1.558399] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_inst.bin
[ 1.558406] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_data.bin
[ 1.558414] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_sig.bin
[ 1.558428] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_nonctx.bin
[ 1.558440] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_ctx.bin
[ 1.558452] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_bundle_init.bin
[ 1.558467] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_method_init.bin
[ 1.558486] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/sig-1.bin
[ 1.558513] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/image-1.bin
[ 1.558536] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/desc-1.bin
[ 1.601101] nouveau 0000:01:00.0: fb: 6144 MiB GDDR5
[ 1.785556] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.791897] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.828821] ata3.00: ATA-10: ST1000LM035-1RK172, LCM2, max UDMA/100
[ 1.828822] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.878034] ata3.00: configured for UDMA/100
[ 1.897258] scsi 2:0:0:0: Direct-Access ATA ST1000LM035-1RK1 LCM2 PQ: 0 ANSI: 5
[ 1.901484] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.901486] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.901490] sd 2:0:0:0: [sda] Write Protect is off
[ 1.901491] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.901503] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.944103] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
[ 1.944117] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.944118] usb 1-3: Product: USB Receiver
[ 1.944119] usb 1-3: Manufacturer: Logitech
[ 1.951055] hid: raw HID events driver (C) Jiri Kosina
[ 1.953269] [TTM] Zone kernel: Available graphics memory: 8141102 KiB
[ 1.953270] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 1.953270] [TTM] Initializing pool allocator
[ 1.953273] [TTM] Initializing DMA pool allocator
[ 1.953285] nouveau 0000:01:00.0: DRM: VRAM: 6144 MiB
[ 1.953286] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 1.953288] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 1.953289] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 1.953290] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 1.953290] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 1.953292] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800f46 04600010
[ 1.953293] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000f42 00020010
[ 1.953294] nouveau 0000:01:00.0: DRM: DCB outp 05: 02022f62 00020010
[ 1.953295] nouveau 0000:01:00.0: DRM: DCB outp 10: 04855f96 04600020
[ 1.953296] nouveau 0000:01:00.0: DRM: DCB outp 11: 04055f92 00020020
[ 1.953296] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001046
[ 1.953297] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
[ 1.953298] nouveau 0000:01:00.0: DRM: DCB conn 05: 02000546
[ 1.953651] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 1.956673] usbcore: registered new interface driver usbhid
[ 1.956674] usbhid: USB HID core driver
[ 1.958143] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52B.0001/input/input6
[ 2.017701] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[ 2.017853] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input7
[ 2.017905] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input8
[ 2.051135] sda: sda1
[ 2.051431] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.077546] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 2.081555] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input9
[ 2.081643] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[ 2.081760] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 2.149557] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.149909] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 2.149912] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
[ 2.197565] tsc: Refined TSC clocksource calibration: 2495.997 MHz
[ 2.197568] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa7454d2a, max_idle_ns: 440795253903 ns
[ 2.201535] clocksource: Switched to clocksource tsc
[ 2.274258] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 2.288436] usb 1-6: New USB device found, idVendor=04f2, idProduct=b57e, bcdDevice=87.40
[ 2.288438] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.288438] usb 1-6: Product: EasyCamera
[ 2.288439] usb 1-6: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.288440] usb 1-6: SerialNumber: 0001
[ 2.313544] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.335910] psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4744]
[ 2.370082] psmouse serio1: synaptics: queried min coordinates: x [1272..], y [1108..]
[ 2.370085] psmouse serio1: synaptics: Your touchpad (PNP: SYN2b96 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.394872] input: Logitech Wireless Device PID:4069 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input11
[ 2.394955] input: Logitech Wireless Device PID:4069 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input12
[ 2.395005] input: Logitech Wireless Device PID:4069 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input13
[ 2.395021] input: Logitech Wireless Device PID:4069 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input14
[ 2.395043] hid-generic 0003:046D:4069.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4069] on usb-0000:00:14.0-3/input2:2
[ 2.396553] input: Logitech Wireless Device PID:4066 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4066.0005/input/input18
[ 2.396640] input: Logitech Wireless Device PID:4066 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4066.0005/input/input19
[ 2.397493] input: Logitech Wireless Device PID:4066 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4066.0005/input/input20
[ 2.397515] input: Logitech Wireless Device PID:4066 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4066.0005/input/input21
[ 2.397639] hid-generic 0003:046D:4066.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4066] on usb-0000:00:14.0-3/input2:3
[ 2.421551] usb 1-11: new full-speed USB device number 4 using xhci_hcd
[ 2.443339] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x440000, board id: 3287, fw id: 2469908
[ 2.481542] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.490831] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.544669] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input25
[ 2.545047] logitech-hidpp-device 0003:046D:4069.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-3/input2:2
[ 2.575668] usb 1-11: New USB device found, idVendor=0cf3, idProduct=e500, bcdDevice= 0.01
[ 2.575671] usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.664615] input: Logitech Craft as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4066.0005/input/input26
[ 2.664997] logitech-hidpp-device 0003:046D:4066.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Craft] on usb-0000:00:14.0-3/input2:3
[ 2.676252] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 2.677265] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.677276] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 2.677434] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input27
[ 2.678498] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.678613] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input28
[ 2.678711] vga_switcheroo: enabled
[ 2.679358] fbcon: i915drmfb (fb0) is primary device
[ 2.692760] Console: switching to colour frame buffer device 240x67
[ 2.717264] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.800567] PM: Image not found (code -22)
[ 2.899769] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.934110] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 2.983067] systemd[1]: Inserted module 'autofs4'
[ 3.095503] systemd[1]: systemd 247.3-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 3.114145] systemd[1]: Detected architecture x86-64.
[ 3.114456] systemd[1]: Set hostname to <taonix>.
[ 3.198573] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 3.212591] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.247810] systemd[1]: Created slice system-getty.slice.
[ 3.248316] systemd[1]: Created slice system-modprobe.slice.
[ 3.248771] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.249131] systemd[1]: Created slice User and Session Slice.
[ 3.249304] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.249558] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.249665] systemd[1]: Reached target User and Group Name Lookups.
[ 3.249691] systemd[1]: Reached target Remote File Systems.
[ 3.249711] systemd[1]: Reached target Slices.
[ 3.249925] systemd[1]: Listening on Syslog Socket.
[ 3.250066] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.250148] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.250400] systemd[1]: Listening on Journal Audit Socket.
[ 3.250544] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.250712] systemd[1]: Listening on Journal Socket.
[ 3.251017] systemd[1]: Listening on udev Control Socket.
[ 3.251162] systemd[1]: Listening on udev Kernel Socket.
[ 3.252290] systemd[1]: Mounting Huge Pages File System...
[ 3.253455] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.254743] systemd[1]: Mounting Kernel Debug File System...
[ 3.255977] systemd[1]: Mounting Kernel Trace File System...
[ 3.257357] systemd[1]: Starting Set the console keyboard layout...
[ 3.258588] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.259724] systemd[1]: Starting Load Kernel Module configfs...
[ 3.260841] systemd[1]: Starting Load Kernel Module drm...
[ 3.261984] systemd[1]: Starting Load Kernel Module fuse...
[ 3.262727] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.262788] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 3.265119] systemd[1]: Starting Journal Service...
[ 3.267016] systemd[1]: Starting Load Kernel Modules...
[ 3.268152] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.269313] systemd[1]: Starting Coldplug All udev Devices...
[ 3.271559] systemd[1]: Mounted Huge Pages File System.
[ 3.271775] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.271946] systemd[1]: Mounted Kernel Debug File System.
[ 3.272108] systemd[1]: Mounted Kernel Trace File System.
[ 3.272531] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.272869] systemd[1]: modprobe@configfs.service: Succeeded.
[ 3.273079] systemd[1]: Finished Load Kernel Module configfs.
[ 3.273346] systemd[1]: modprobe@drm.service: Succeeded.
[ 3.273570] systemd[1]: Finished Load Kernel Module drm.
[ 3.274991] systemd[1]: Mounting Kernel Configuration File System...
[ 3.276818] fuse: init (API version 7.32)
[ 3.277399] systemd[1]: modprobe@fuse.service: Succeeded.
[ 3.277616] systemd[1]: Finished Load Kernel Module fuse.
[ 3.277757] systemd[1]: Mounted Kernel Configuration File System.
[ 3.278597] systemd[1]: Mounting FUSE Control File System...
[ 3.280765] systemd[1]: Mounted FUSE Control File System.
[ 3.286011] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[ 3.287311] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.287704] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.287736] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.288318] systemd[1]: Starting Load/Save Random Seed...
[ 3.288930] systemd[1]: Starting Create System Users...
[ 3.293256] lp: driver loaded but no devices found
[ 3.295403] ppdev: user-space parallel port driver
[ 3.298445] systemd[1]: Finished Load Kernel Modules.
[ 3.299145] systemd[1]: Starting Apply Kernel Variables...
[ 3.299861] systemd[1]: Finished Load/Save Random Seed.
[ 3.299990] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 3.301920] systemd[1]: Finished Create System Users.
[ 3.302564] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.304876] systemd[1]: Finished Apply Kernel Variables.
[ 3.311355] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.312484] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 3.337771] systemd[1]: Finished Set the console keyboard layout.
[ 3.337911] systemd[1]: Reached target Local File Systems (Pre).
[ 3.353066] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 3.353963] systemd[1]: Started Journal Service.
[ 3.359467] systemd-journald[250]: Received client request to flush runtime journal.
[ 3.464040] ACPI: AC Adapter [ADP0] (on-line)
[ 3.560093] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input29
[ 3.571529] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.574978] mc: Linux media interface: v0.10
[ 3.577243] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.620494] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 3.622915] videodev: Linux video capture interface: v2.00
[ 3.630914] Adding 1000444k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:1000444k SSFS
[ 3.633634] input: PC Speaker as /devices/platform/pcspkr/input/input30
[ 3.643626] cryptd: max_cpu_qlen set to 1000
[ 3.693498] pstore: Using crash dump compression: deflate
[ 3.693620] pstore: Registered efi as persistent store backend
[ 3.706087] AVX2 version of gcm_enc/dec engaged.
[ 3.706088] AES CTR mode by8 optimization enabled
[ 3.709299] iTCO_vendor_support: vendor-support=0
[ 3.712498] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.712559] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 3.712887] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.714906] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.714907] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.714908] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.714909] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.714909] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.797817] uvcvideo: Found UVC 1.00 device EasyCamera (04f2:b57e)
[ 3.797886] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.798063] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 3.798222] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 3.798391] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.798940] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 3.799057] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 3.821690] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input31
[ 3.821747] usbcore: registered new interface driver uvcvideo
[ 3.821748] USB Video Class driver (1.1.1)
[ 3.931265] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 4.039910] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.040440] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.040447] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 4.062593] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.101339] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 4.105425] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 4.110980] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input32
[ 4.111040] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input33
[ 4.111106] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input34
[ 4.111222] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input35
[ 4.111293] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input36
[ 4.111365] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input37
[ 4.120416] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.120420] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.120422] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.120424] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.120425] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.120427] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 4.120429] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.143500] audit: type=1400 audit(1618828661.436:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=545 comm="apparmor_parser"
[ 4.145303] audit: type=1400 audit(1618828661.436:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=548 comm="apparmor_parser"
[ 4.145307] audit: type=1400 audit(1618828661.436:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=548 comm="apparmor_parser"
[ 4.145310] audit: type=1400 audit(1618828661.436:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=548 comm="apparmor_parser"
[ 4.147232] audit: type=1400 audit(1618828661.440:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=549 comm="apparmor_parser"
[ 4.154195] audit: type=1400 audit(1618828661.448:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=550 comm="apparmor_parser"
[ 4.156484] audit: type=1400 audit(1618828661.448:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=547 comm="apparmor_parser"
[ 4.156489] audit: type=1400 audit(1618828661.448:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=547 comm="apparmor_parser"
[ 4.156492] audit: type=1400 audit(1618828661.448:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=547 comm="apparmor_parser"
[ 4.178231] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38
[ 4.178284] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input39
[ 4.178327] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40
[ 4.179450] Bluetooth: Core ver 2.22
[ 4.179465] NET: Registered protocol family 31
[ 4.179466] Bluetooth: HCI device and connection manager initialized
[ 4.179468] Bluetooth: HCI socket layer initialized
[ 4.179470] Bluetooth: L2CAP socket layer initialized
[ 4.179473] Bluetooth: SCO socket layer initialized
[ 4.188662] usbcore: registered new interface driver btusb
[ 4.295506] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:00 [mem 0xfdb00000-0xfdffffff]
[ 4.295510] caller pmc_core_probe+0x7d/0x370 [intel_pmc_core] mapping multiple BARs
[ 4.295522] intel_pmc_core intel_pmc_core.0: initialized
[ 4.301041] intel_rapl_common: Found RAPL domain package
[ 4.301043] intel_rapl_common: Found RAPL domain core
[ 4.301044] intel_rapl_common: Found RAPL domain uncore
[ 4.301045] intel_rapl_common: Found RAPL domain dram
[ 4.326028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.326030] Bluetooth: BNEP filters: protocol multicast
[ 4.326032] Bluetooth: BNEP socket layer initialized
[ 4.332997] NET: Registered protocol family 38
[ 4.398644] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[ 4.399431] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 4.400233] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
[ 4.403720] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/firmware-6.bin
[ 4.403727] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[ 4.403728] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 4.404181] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[ 4.444198] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[ 4.469563] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 4.470091] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/board-2.bin
[ 4.470266] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 4.566333] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 4.646465] ath: EEPROM regdomain: 0x6c
[ 4.646467] ath: EEPROM indicates we should expect a direct regpair map
[ 4.646469] ath: Country alpha2 being used: 00
[ 4.646470] ath: Regpair used: 0x6c
[ 4.661636] r8169 0000:03:00.0 enp3s0: Link is Down
[ 4.666357] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 15.171565] wlp2s0: authenticate with 50:c7:bf:be:d5:ea
[ 15.203270] wlp2s0: send auth to 50:c7:bf:be:d5:ea (try 1/3)
[ 15.204381] wlp2s0: authenticated
[ 15.209538] wlp2s0: associate with 50:c7:bf:be:d5:ea (try 1/3)
[ 15.210794] wlp2s0: RX AssocResp from 50:c7:bf:be:d5:ea (capab=0x1011 status=0 aid=2)
[ 15.213430] wlp2s0: associated
[ 15.213560] ath: EEPROM regdomain: 0x8114
[ 15.213568] ath: EEPROM indicates we should expect a country code
[ 15.213571] ath: doing EEPROM country->regdmn map search
[ 15.213573] ath: country maps to regdmn code: 0x37
[ 15.213574] ath: Country alpha2 being used: DE
[ 15.213575] ath: Regpair used: 0x37
[ 15.213576] ath: regdomain 0x8114 dynamically updated by country element
[ 15.259916] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 15.291226] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 50:c7:bf:be:d5:ea
[ 17.364009] tun: Universal TUN/TAP device driver, 1.6
[ 18.270426] logitech-hidpp-device 0003:046D:4069.0004: HID++ 4.5 device connected.
[ 20.389588] kauditd_printk_skb: 10 callbacks suppressed
[ 20.389588] audit: type=1400 audit(1618828677.684:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1551 comm="apparmor_parser"
[ 20.647915] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 20.649710] Bridge firewalling registered
[ 20.767131] Initializing XFRM netlink socket
[ 21.095779] br-d4b3d35cfebe: port 1(veth824901e) entered blocking state
[ 21.095782] br-d4b3d35cfebe: port 1(veth824901e) entered disabled state
[ 21.096018] device veth824901e entered promiscuous mode
[ 21.096997] br-d4b3d35cfebe: port 1(veth824901e) entered blocking state
[ 21.097000] br-d4b3d35cfebe: port 1(veth824901e) entered forwarding state
[ 21.097055] br-d4b3d35cfebe: port 1(veth824901e) entered disabled state
[ 21.155340] br-d4b3d35cfebe: port 2(veth17bba40) entered blocking state
[ 21.155344] br-d4b3d35cfebe: port 2(veth17bba40) entered disabled state
[ 21.155471] device veth17bba40 entered promiscuous mode
[ 21.155671] br-d4b3d35cfebe: port 2(veth17bba40) entered blocking state
[ 21.155674] br-d4b3d35cfebe: port 2(veth17bba40) entered forwarding state
[ 21.155703] IPv6: ADDRCONF(NETDEV_CHANGE): br-d4b3d35cfebe: link becomes ready
[ 21.156043] br-d4b3d35cfebe: port 2(veth17bba40) entered disabled state
[ 21.215719] br-d4b3d35cfebe: port 3(vethb45e91d) entered blocking state
[ 21.215723] br-d4b3d35cfebe: port 3(vethb45e91d) entered disabled state
[ 21.215938] device vethb45e91d entered promiscuous mode
[ 21.216229] br-d4b3d35cfebe: port 3(vethb45e91d) entered blocking state
[ 21.216232] br-d4b3d35cfebe: port 3(vethb45e91d) entered forwarding state
[ 21.273440] br-d4b3d35cfebe: port 4(vethb6430a3) entered blocking state
[ 21.273444] br-d4b3d35cfebe: port 4(vethb6430a3) entered disabled state
[ 21.273667] device vethb6430a3 entered promiscuous mode
[ 21.273920] br-d4b3d35cfebe: port 4(vethb6430a3) entered blocking state
[ 21.273923] br-d4b3d35cfebe: port 4(vethb6430a3) entered forwarding state
[ 21.451977] br-d4b3d35cfebe: port 5(vethcfe8a6e) entered blocking state
[ 21.451981] br-d4b3d35cfebe: port 5(vethcfe8a6e) entered disabled state
[ 21.452299] device vethcfe8a6e entered promiscuous mode
[ 21.455749] br-d4b3d35cfebe: port 5(vethcfe8a6e) entered blocking state
[ 21.455753] br-d4b3d35cfebe: port 5(vethcfe8a6e) entered forwarding state
[ 21.568889] br-d4b3d35cfebe: port 6(vethc76bf04) entered blocking state
[ 21.568892] br-d4b3d35cfebe: port 6(vethc76bf04) entered disabled state
[ 21.569124] device vethc76bf04 entered promiscuous mode
[ 21.570087] br-d4b3d35cfebe: port 6(vethc76bf04) entered blocking state
[ 21.570089] br-d4b3d35cfebe: port 6(vethc76bf04) entered forwarding state
[ 21.813633] br-d4b3d35cfebe: port 3(vethb45e91d) entered disabled state
[ 21.813669] br-d4b3d35cfebe: port 4(vethb6430a3) entered disabled state
[ 21.813695] br-d4b3d35cfebe: port 5(vethcfe8a6e) entered disabled state
[ 21.813718] br-d4b3d35cfebe: port 6(vethc76bf04) entered disabled state
[ 21.971026] eth0: renamed from vethba7642a
[ 22.001861] IPv6: ADDRCONF(NETDEV_CHANGE): vethb45e91d: link becomes ready
[ 22.001910] br-d4b3d35cfebe: port 3(vethb45e91d) entered blocking state
[ 22.001912] br-d4b3d35cfebe: port 3(vethb45e91d) entered forwarding state
[ 22.046367] eth0: renamed from veth633f191
[ 22.071334] IPv6: ADDRCONF(NETDEV_CHANGE): vethb6430a3: link becomes ready
[ 22.071362] br-d4b3d35cfebe: port 4(vethb6430a3) entered blocking state
[ 22.071364] br-d4b3d35cfebe: port 4(vethb6430a3) entered forwarding state
[ 22.097952] eth0: renamed from veth03887d1
[ 22.147995] IPv6: ADDRCONF(NETDEV_CHANGE): veth17bba40: link becomes ready
[ 22.148025] br-d4b3d35cfebe: port 2(veth17bba40) entered blocking state
[ 22.148027] br-d4b3d35cfebe: port 2(veth17bba40) entered forwarding state
[ 22.148094] eth0: renamed from vethb50870f
[ 22.162737] IPv6: ADDRCONF(NETDEV_CHANGE): veth824901e: link becomes ready
[ 22.162773] br-d4b3d35cfebe: port 1(veth824901e) entered blocking state
[ 22.162777] br-d4b3d35cfebe: port 1(veth824901e) entered forwarding state
[ 22.198050] eth0: renamed from veth61199c1
[ 22.225746] IPv6: ADDRCONF(NETDEV_CHANGE): vethcfe8a6e: link becomes ready
[ 22.225771] br-d4b3d35cfebe: port 5(vethcfe8a6e) entered blocking state
[ 22.225773] br-d4b3d35cfebe: port 5(vethcfe8a6e) entered forwarding state
[ 22.253938] eth0: renamed from veth5f8c208
[ 22.273963] IPv6: ADDRCONF(NETDEV_CHANGE): vethc76bf04: link becomes ready
[ 22.273988] br-d4b3d35cfebe: port 6(vethc76bf04) entered blocking state
[ 22.273989] br-d4b3d35cfebe: port 6(vethc76bf04) entered forwarding state
[ 41.978443] logitech-hidpp-device 0003:046D:4066.0005: HID++ 4.5 device connected.
[ 76.847080] pci_bus 0000:02: Allocating resources
[ 76.847146] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 76.847150] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 76.847162] pci_bus 0000:03: Allocating resources
[ 76.847169] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 76.847191] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[ 76.847204] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
[ 76.847208] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 76.847716] pci_bus 0000:04: Allocating resources
[ 76.847954] pcieport 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 76.847958] pcieport 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 76.847980] pcieport 0000:00:1d.0: BAR 15: assigned [mem 0x80500000-0x806fffff 64bit pref]
[ 76.847986] pcieport 0000:00:1d.0: BAR 13: assigned [io 0x7000-0x7fff]
[ 78.077612] nouveau 0000:01:00.0: Enabling HDA controller
[ 81.672239] pci_bus 0000:02: Allocating resources
[ 81.672361] pci_bus 0000:03: Allocating resources
[ 81.672812] pci_bus 0000:04: Allocating resources
[ 81.877591] nouveau 0000:01:00.0: DRM: allocated 3840x2160 fb: 0x200000, bo 00000000844a4c8c
[ 81.877636] nouveau 0000:01:00.0: [drm] fb1: nouveaudrmfb frame buffer device
[ 93.825821] pci_bus 0000:02: Allocating resources
[ 93.825941] pci_bus 0000:03: Allocating resources
[ 93.826456] pci_bus 0000:04: Allocating resources
[ 95.043735] nouveau 0000:01:00.0: Enabling HDA controller
[ 95.751882] pci_bus 0000:02: Allocating resources
[ 95.751995] pci_bus 0000:03: Allocating resources
[ 95.752354] pci_bus 0000:04: Allocating resources
sudo dmesg | grep drm
[ 1.548622] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 1.548626] fb0: switching to inteldrmfb from EFI VGA
[ 1.556376] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.149557] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.149909] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 2.313544] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.481542] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.676252] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 2.679358] fbcon: i915drmfb (fb0) is primary device
[ 2.717264] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 3.260841] systemd[1]: Starting Load Kernel Module drm...
[ 3.273346] systemd[1]: modprobe@drm.service: Succeeded.
[ 3.273570] systemd[1]: Finished Load Kernel Module drm.
[ 81.877636] nouveau 0000:01:00.0: [drm] fb1: nouveaudrmfb frame buffer device
sudo dmesg | grep nouveau
[ 1.525479] nouveau: detected PR support, will not use DSM
[ 1.525495] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.525758] nouveau 0000:01:00.0: NVIDIA GP106 (136000a1)
[ 1.557953] nouveau 0000:01:00.0: bios: version 86.06.51.00.08
[ 1.558231] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/nvdec/scrubber.bin
[ 1.558246] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/bl.bin
[ 1.558259] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/ucode_load.bin
[ 1.558273] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/unload_bl.bin
[ 1.558283] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/acr/ucode_unload.bin
[ 1.558286] nouveau 0000:01:00.0: pmu: firmware unavailable
[ 1.558333] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_bl.bin
[ 1.558349] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_inst.bin
[ 1.558358] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_data.bin
[ 1.558366] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/fecs_sig.bin
[ 1.558381] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_bl.bin
[ 1.558399] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_inst.bin
[ 1.558406] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_data.bin
[ 1.558414] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/gpccs_sig.bin
[ 1.558428] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_nonctx.bin
[ 1.558440] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_ctx.bin
[ 1.558452] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_bundle_init.bin
[ 1.558467] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/gr/sw_method_init.bin
[ 1.558486] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/sig-1.bin
[ 1.558513] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/image-1.bin
[ 1.558536] nouveau 0000:01:00.0: firmware: direct-loading firmware nvidia/gp106/sec2/desc-1.bin
[ 1.601101] nouveau 0000:01:00.0: fb: 6144 MiB GDDR5
[ 1.953285] nouveau 0000:01:00.0: DRM: VRAM: 6144 MiB
[ 1.953286] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 1.953288] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 1.953289] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 1.953290] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 1.953290] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 1.953292] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800f46 04600010
[ 1.953293] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000f42 00020010
[ 1.953294] nouveau 0000:01:00.0: DRM: DCB outp 05: 02022f62 00020010
[ 1.953295] nouveau 0000:01:00.0: DRM: DCB outp 10: 04855f96 04600020
[ 1.953296] nouveau 0000:01:00.0: DRM: DCB outp 11: 04055f92 00020020
[ 1.953296] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001046
[ 1.953297] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
[ 1.953298] nouveau 0000:01:00.0: DRM: DCB conn 05: 02000546
[ 1.953651] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 2.149557] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.149909] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 2.149912] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
[ 2.313544] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.481542] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 4.105425] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 78.077612] nouveau 0000:01:00.0: Enabling HDA controller
[ 81.877591] nouveau 0000:01:00.0: DRM: allocated 3840x2160 fb: 0x200000, bo 00000000844a4c8c
[ 81.877636] nouveau 0000:01:00.0: [drm] fb1: nouveaudrmfb frame buffer device
[ 95.043735] nouveau 0000:01:00.0: Enabling HDA controller
sudo dmesg | grep vga
[ 0.338950] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.338950] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.338950] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.338950] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.338950] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.338950] vgaarb: loaded
[ 1.548795] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.555814] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.678711] vga_switcheroo: enabled
[ 4.040447] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
sudo journalctl -r -p err
-- Journal begins at Mon 2021-04-19 13:25:03 +08, ends at Mon 2021-04-19 18:51:22 +08. --
avril 19 18:37:41 taonix kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
avril 19 18:37:41 taonix kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
avril 19 18:37:41 taonix kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
avril 19 18:37:41 taonix bluetoothd[567]: sap-server: Operation not permitted (1)
avril 19 18:37:41 taonix bluetoothd[567]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
-- Boot 7cd0b03c90d84476865aa6d653e8a624 --
avril 19 18:37:22 taonix kernel: watchdog: watchdog0: watchdog did not stop!
avril 19 18:37:22 taonix nm-openvpn[1178]: event_wait : Interrupted system call (code=4)
avril 19 18:37:21 taonix systemd-udevd[3353]: vethe507aff: Failed to get link config: No such device
avril 19 18:37:21 taonix systemd-udevd[3353]: vethf0e155b: Failed to get link config: No such device
avril 19 18:37:12 taonix systemd-udevd[3264]: veth76390a8: Failed to get link config: No such device
avril 19 18:37:11 taonix systemd-udevd[3257]: veth8b6368d: Failed to get link config: No such device
avril 19 18:36:23 taonix bluetoothd[639]: sap-server: Operation not permitted (1)
avril 19 18:36:23 taonix bluetoothd[639]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
avril 19 18:36:23 taonix kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
avril 19 18:36:23 taonix kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
avril 19 18:36:23 taonix kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
-- Boot 586d3a4ad17348109f84d1943258648c --
avril 19 18:30:22 taonix kernel: watchdog: watchdog0: watchdog did not stop!
avril 19 18:30:22 taonix systemd-udevd[3854]: veth223b364: Failed to get link config: No such device
avril 19 18:30:22 taonix systemd-udevd[3826]: veth2904e9c: Failed to get link config: No such device
avril 19 18:30:12 taonix systemd-udevd[3744]: veth9572320: Failed to get link config: No such device
avril 19 18:30:12 taonix systemd-udevd[3744]: vethb5ef8a2: Failed to get link config: No such device
avril 19 18:30:12 taonix systemd-udevd[3739]: vethb5ef8a2: Failed to get link config: No such device
avril 19 18:18:12 taonix bluetoothd[626]: sap-server: Operation not permitted (1)
avril 19 18:18:12 taonix bluetoothd[626]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
avril 19 18:18:12 taonix kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
avril 19 18:18:12 taonix kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
avril 19 18:18:12 taonix kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
avril 19 18:18:11 taonix kernel: nouveau 0000:01:00.0: DRM: Failure to read SCDC_TMDS_CONFIG: -6
-- Boot e7ac40a766bd48178c10abff98789b18 --
avril 19 18:17:52 taonix kernel: watchdog: watchdog0: watchdog did not stop!
avril 19 18:17:51 taonix nm-openvpn[31994]: event_wait : Interrupted system call (code=4)
avril 19 18:17:46 taonix NetworkManager[25707]: <error> [1618827466.4858] platform-linux: sysctl: failed to set '/proc/sys/net/ipv6/conf/veth90c9f71/disable_ipv6' to '1': (2) Aucun fichier >
avril 19 18:17:46 taonix systemd-udevd[32432]: veth2efdbec: Failed to get link config: No such device
avril 19 18:17:37 taonix systemd-udevd[32339]: vethbe3a147: Failed to get link config: No such device
avril 19 18:17:36 taonix systemd-udevd[32339]: veth2932618: Failed to get link config: No such device
avril 19 18:14:32 taonix nm-openvpn[9885]: event_wait : Interrupted system call (code=4)
avril 19 18:14:26 taonix systemd[1]: /lib/systemd/system/systemd-tmpfiles-setup-dev.service:12: Failed to parse value, ignoring: CANTCREAT
avril 19 18:14:26 taonix systemd[1]: /lib/systemd/system/systemd-tmpfiles-setup-dev.service:12: Failed to parse value, ignoring: DATAERR CANTCREAT
avril 19 18:14:26 taonix systemd[1]: /lib/systemd/system/systemd-tmpfiles-setup.service:13: Failed to parse value, ignoring: CANTCREAT
avril 19 18:14:26 taonix systemd[1]: /lib/systemd/system/systemd-tmpfiles-setup.service:13: Failed to parse value, ignoring: DATAERR CANTCREAT
glxinfo -B
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Intel (0x8086)
Device: Mesa Intel(R) HD Graphics 630 (KBL GT2) (0x591b)
Version: 20.3.4
Accelerated: yes
Video memory: 3072MB
Unified memory: yes
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) HD Graphics 630 (KBL GT2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 20.3.4
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 20.3.4
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.3.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
DRI_PRIME=0 glxinfo -B
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Intel (0x8086)
Device: Mesa Intel(R) HD Graphics 630 (KBL GT2) (0x591b)
Version: 20.3.4
Accelerated: yes
Video memory: 3072MB
Unified memory: yes
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) HD Graphics 630 (KBL GT2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 20.3.4
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 20.3.4
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.3.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
DRI_PRIME=1 glxinfo -B
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: nouveau (0x10de)
Device: NV136 (0x1c20)
Version: 20.3.4
Accelerated: yes
Video memory: 6111MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 4.3
Max compat profile version: 4.3
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: nouveau
OpenGL renderer string: NV136
OpenGL core profile version string: 4.3 (Core Profile) Mesa 20.3.4
OpenGL core profile shading language version string: 4.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.3 (Compatibility Profile) Mesa 20.3.4
OpenGL shading language version string: 4.30
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.3.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
cat /var/log/Xorg.0.log
[ 4.456]
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[ 4.456] Build Operating System: linux Debian
[ 4.456] Current Operating System: Linux taonix 5.10.0-6-amd64 #1 SMP Debian 5.10.28-1 (2021-04-09) x86_64
[ 4.456] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-6-amd64 root=UUID=c4d525e1-a349-48b2-b1b8-4a0852fb5802 ro quiet
[ 4.456] Build Date: 17 February 2021 09:17:43AM
[ 4.456] xorg-server 2:1.20.10-3 (https://www.debian.org/support)
[ 4.456] Current version of pixman: 0.40.0
[ 4.456] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.456] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.456] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 19 18:37:41 2021
[ 4.458] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.459] (==) No Layout section. Using the first Screen section.
[ 4.459] (==) No screen section available. Using defaults.
[ 4.459] (**) |-->Screen "Default Screen Section" (0)
[ 4.459] (**) | |-->Monitor "<default monitor>"
[ 4.460] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.460] (==) Automatically adding devices
[ 4.460] (==) Automatically enabling devices
[ 4.460] (==) Automatically adding GPU devices
[ 4.460] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.461] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.461] Entry deleted from font path.
[ 4.462] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 4.462] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.462] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.462] (II) Loader magic: 0x564f2af30e40
[ 4.462] (II) Module ABI versions:
[ 4.462] X.Org ANSI C Emulation: 0.4
[ 4.462] X.Org Video Driver: 24.1
[ 4.462] X.Org XInput driver : 24.1
[ 4.462] X.Org Server Extension : 10.0
[ 4.463] (++) using VT number 7
[ 4.463] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.463] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.463] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.476] (--) PCI:*(0@0:2:0) 8086:591b:17aa:39b9 rev 4, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 4.476] (--) PCI: (1@0:0:0) 10de:1c20:17aa:39b9 rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 4.476] (II) LoadModule: "glx"
[ 4.476] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.482] (II) Module glx: vendor="X.Org Foundation"
[ 4.482] compiled for 1.20.10, module version = 1.0.0
[ 4.482] ABI class: X.Org Server Extension, version 10.0
[ 4.557] (==) Matched modesetting as autoconfigured driver 0
[ 4.557] (==) Matched fbdev as autoconfigured driver 1
[ 4.557] (==) Matched vesa as autoconfigured driver 2
[ 4.557] (==) Assigned the driver to the xf86ConfigLayout
[ 4.557] (II) LoadModule: "modesetting"
[ 4.557] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.558] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.558] compiled for 1.20.10, module version = 1.20.10
[ 4.558] Module class: X.Org Video Driver
[ 4.558] ABI class: X.Org Video Driver, version 24.1
[ 4.558] (II) LoadModule: "fbdev"
[ 4.558] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.559] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.559] compiled for 1.20.0, module version = 0.5.0
[ 4.559] Module class: X.Org Video Driver
[ 4.559] ABI class: X.Org Video Driver, version 24.0
[ 4.559] (II) LoadModule: "vesa"
[ 4.559] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.559] (II) Module vesa: vendor="X.Org Foundation"
[ 4.559] compiled for 1.20.9, module version = 2.5.0
[ 4.559] Module class: X.Org Video Driver
[ 4.559] ABI class: X.Org Video Driver, version 24.1
[ 4.559] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.559] (II) FBDEV: driver for framebuffer: fbdev
[ 4.559] (II) VESA: driver for VESA chipsets: vesa
[ 4.590] (II) modeset(0): using drv /dev/dri/card0
[ 4.590] (WW) Falling back to old probe method for fbdev
[ 4.590] (II) Loading sub module "fbdevhw"
[ 4.590] (II) LoadModule: "fbdevhw"
[ 4.590] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.591] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.591] compiled for 1.20.10, module version = 0.0.2
[ 4.591] ABI class: X.Org Video Driver, version 24.1
[ 4.591] (II) modeset(G0): using drv /dev/dri/card1
[ 4.591] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.591] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 4.591] (==) modeset(0): RGB weight 888
[ 4.591] (==) modeset(0): Default visual is TrueColor
[ 4.591] (II) Loading sub module "glamoregl"
[ 4.591] (II) LoadModule: "glamoregl"
[ 4.591] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.599] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.599] compiled for 1.20.10, module version = 1.0.1
[ 4.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.764] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 630 (KBL GT2)
[ 4.764] (II) modeset(0): glamor initialized
[ 4.765] (II) modeset(0): Output eDP-1 has no monitor section
[ 4.766] (II) modeset(0): EDID for output eDP-1
[ 4.766] (II) modeset(0): Manufacturer: AUO Model: 61ed Serial#: 0
[ 4.766] (II) modeset(0): Year: 2016 Week: 0
[ 4.766] (II) modeset(0): EDID Version: 1.4
[ 4.766] (II) modeset(0): Digital Display Input
[ 4.766] (II) modeset(0): 6 bits per channel
[ 4.766] (II) modeset(0): Digital interface is DisplayPort
[ 4.766] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 4.766] (II) modeset(0): Gamma: 2.20
[ 4.766] (II) modeset(0): No DPMS capabilities specified
[ 4.766] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 4.766] (II) modeset(0): First detailed timing is preferred mode
[ 4.766] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 4.766] (II) modeset(0): redX: 0.575 redY: 0.345 greenX: 0.350 greenY: 0.575
[ 4.766] (II) modeset(0): blueX: 0.160 blueY: 0.150 whiteX: 0.313 whiteY: 0.329
[ 4.766] (II) modeset(0): Manufacturer's mask: 0
[ 4.766] (II) modeset(0): Supported detailed timing:
[ 4.766] (II) modeset(0): clock: 142.0 MHz Image Size: 344 x 193 mm
[ 4.766] (II) modeset(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2100 h_border: 0
[ 4.766] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1126 v_border: 0
[ 4.766] (II) modeset(0): Unknown vendor-specific block f
[ 4.766] (II) modeset(0): AUO
[ 4.766] (II) modeset(0): B156HAN06.1
[ 4.766] (II) modeset(0): EDID (in hex):
[ 4.766] (II) modeset(0): 00ffffffffffff0006afed6100000000
[ 4.766] (II) modeset(0): 001a0104952213780259259358599329
[ 4.766] (II) modeset(0): 26505400000001010101010101010101
[ 4.766] (II) modeset(0): 010101010101783780b470382e406c30
[ 4.766] (II) modeset(0): aa0058c1100000180000000f00000000
[ 4.766] (II) modeset(0): 00000000000000000020000000fe0041
[ 4.766] (II) modeset(0): 554f0a202020202020202020000000fe
[ 4.766] (II) modeset(0): 004231353648414e30362e31200a00ea
[ 4.766] (II) modeset(0): Printing probed modes for output eDP-1
[ 4.766] (II) modeset(0): Modeline "1920x1080"x60.1 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 4.766] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 4.766] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 4.766] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 4.766] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 4.766] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 4.766] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 4.766] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 4.766] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 4.766] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 4.766] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 4.766] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 4.766] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 4.766] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 4.766] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 4.766] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 4.766] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 4.766] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 4.766] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 4.766] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 4.766] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4.766] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4.766] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 4.766] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 4.766] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 4.766] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4.766] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 4.766] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 4.766] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 4.766] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 4.767] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 4.767] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 4.767] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 4.767] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 4.767] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 4.767] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 4.767] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 4.767] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 4.767] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 4.767] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 4.767] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 4.767] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 4.767] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 4.767] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 4.767] (II) modeset(0): Output eDP-1 connected
[ 4.767] (II) modeset(0): Using exact sizes for initial modes
[ 4.767] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 4.767] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.767] (==) modeset(0): DPI set to (96, 96)
[ 4.767] (II) Loading sub module "fb"
[ 4.767] (II) LoadModule: "fb"
[ 4.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.767] (II) Module fb: vendor="X.Org Foundation"
[ 4.767] compiled for 1.20.10, module version = 1.0.0
[ 4.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.768] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 4.768] (==) modeset(G0): RGB weight 888
[ 4.768] (==) modeset(G0): Default visual is TrueColor
[ 4.768] (II) Loading sub module "glamoregl"
[ 4.768] (II) LoadModule: "glamoregl"
[ 4.768] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.768] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.768] compiled for 1.20.10, module version = 1.0.1
[ 4.768] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.941] (II) modeset(G0): glamor X acceleration enabled on NV136
[ 4.941] (II) modeset(G0): glamor initialized
[ 5.025] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 5.026] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 5.105] (II) modeset(G0): Output DP-1-2 has no monitor section
[ 5.193] (II) modeset(G0): EDID for output DP-1-1
[ 5.194] (II) modeset(G0): EDID for output HDMI-1-1
[ 5.273] (II) modeset(G0): EDID for output DP-1-2
[ 5.273] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.273] (==) modeset(G0): DPI set to (96, 96)
[ 5.273] (II) Loading sub module "fb"
[ 5.273] (II) LoadModule: "fb"
[ 5.273] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.273] (II) Module fb: vendor="X.Org Foundation"
[ 5.273] compiled for 1.20.10, module version = 1.0.0
[ 5.273] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.273] (II) UnloadModule: "fbdev"
[ 5.273] (II) Unloading fbdev
[ 5.273] (II) UnloadSubModule: "fbdevhw"
[ 5.273] (II) Unloading fbdevhw
[ 5.273] (II) UnloadModule: "vesa"
[ 5.273] (II) Unloading vesa
[ 5.288] (==) modeset(0): Backing store enabled
[ 5.288] (==) modeset(0): Silken mouse enabled
[ 5.356] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 5.356] (==) modeset(0): DPMS enabled
[ 5.356] (II) modeset(0): [DRI2] Setup complete
[ 5.356] (II) modeset(0): [DRI2] DRI driver: iris
[ 5.356] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 5.360] (==) modeset(G0): Backing store enabled
[ 5.360] (==) modeset(G0): Silken mouse enabled
[ 5.360] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 5.360] (==) modeset(G0): DPMS enabled
[ 5.360] (II) modeset(G0): [DRI2] Setup complete
[ 5.360] (II) modeset(G0): [DRI2] DRI driver: nouveau
[ 5.360] (II) modeset(G0): [DRI2] VDPAU driver: nouveau
[ 5.361] (II) Initializing extension Generic Event Extension
[ 5.361] (II) Initializing extension SHAPE
[ 5.361] (II) Initializing extension MIT-SHM
[ 5.361] (II) Initializing extension XInputExtension
[ 5.361] (II) Initializing extension XTEST
[ 5.361] (II) Initializing extension BIG-REQUESTS
[ 5.362] (II) Initializing extension SYNC
[ 5.362] (II) Initializing extension XKEYBOARD
[ 5.362] (II) Initializing extension XC-MISC
[ 5.362] (II) Initializing extension SECURITY
[ 5.362] (II) Initializing extension XFIXES
[ 5.362] (II) Initializing extension RENDER
[ 5.362] (II) Initializing extension RANDR
[ 5.362] (II) Initializing extension COMPOSITE
[ 5.362] (II) Initializing extension DAMAGE
[ 5.363] (II) Initializing extension MIT-SCREEN-SAVER
[ 5.363] (II) Initializing extension DOUBLE-BUFFER
[ 5.363] (II) Initializing extension RECORD
[ 5.363] (II) Initializing extension DPMS
[ 5.363] (II) Initializing extension Present
[ 5.363] (II) Initializing extension DRI3
[ 5.363] (II) Initializing extension X-Resource
[ 5.363] (II) Initializing extension XVideo
[ 5.363] (II) Initializing extension XVideo-MotionCompensation
[ 5.363] (II) Initializing extension SELinux
[ 5.363] (II) SELinux: Disabled on system
[ 5.363] (II) Initializing extension GLX
[ 5.372] (II) AIGLX: Loaded and initialized iris
[ 5.372] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.372] (II) Initializing extension XFree86-VidModeExtension
[ 5.372] (II) Initializing extension XFree86-DGA
[ 5.372] (II) Initializing extension XFree86-DRI
[ 5.373] (II) Initializing extension DRI2
[ 5.375] (II) modeset(G0): Damage tracking initialized
[ 5.379] (II) modeset(0): Damage tracking initialized
[ 5.379] (II) modeset(0): Setting screen physical size to 508 x 285
[ 5.427] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 5.427] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.427] (II) LoadModule: "libinput"
[ 5.427] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.430] (II) Module libinput: vendor="X.Org Foundation"
[ 5.430] compiled for 1.20.8, module version = 0.30.0
[ 5.430] Module class: X.Org XInput Driver
[ 5.430] ABI class: X.Org XInput driver, version 24.1
[ 5.430] (II) Using input driver 'libinput' for 'Power Button'
[ 5.430] (**) Power Button: always reports core events
[ 5.430] (**) Option "Device" "/dev/input/event3"
[ 5.430] (**) Option "_source" "server/udev"
[ 5.434] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 5.434] (II) event3 - Power Button: device is a keyboard
[ 5.434] (II) event3 - Power Button: device removed
[ 5.449] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 5.449] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.449] (**) Option "xkb_model" "pc105"
[ 5.449] (**) Option "xkb_layout" "fr"
[ 5.449] (**) Option "xkb_variant" "latin9"
[ 5.463] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 5.463] (II) event3 - Power Button: device is a keyboard
[ 5.464] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 5.464] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.464] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.464] (**) Video Bus: always reports core events
[ 5.464] (**) Option "Device" "/dev/input/event8"
[ 5.464] (**) Option "_source" "server/udev"
[ 5.465] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 5.465] (II) event8 - Video Bus: device is a keyboard
[ 5.465] (II) event8 - Video Bus: device removed
[ 5.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input28/event8"
[ 5.509] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.509] (**) Option "xkb_model" "pc105"
[ 5.509] (**) Option "xkb_layout" "fr"
[ 5.509] (**) Option "xkb_variant" "latin9"
[ 5.511] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 5.511] (II) event8 - Video Bus: device is a keyboard
[ 5.513] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 5.513] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.513] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.513] (**) Video Bus: always reports core events
[ 5.513] (**) Option "Device" "/dev/input/event7"
[ 5.513] (**) Option "_source" "server/udev"
[ 5.514] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 5.514] (II) event7 - Video Bus: device is a keyboard
[ 5.514] (II) event7 - Video Bus: device removed
[ 5.549] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input27/event7"
[ 5.549] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 5.549] (**) Option "xkb_model" "pc105"
[ 5.549] (**) Option "xkb_layout" "fr"
[ 5.549] (**) Option "xkb_variant" "latin9"
[ 5.551] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 5.551] (II) event7 - Video Bus: device is a keyboard
[ 5.552] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 5.552] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.552] (II) Using input driver 'libinput' for 'Power Button'
[ 5.552] (**) Power Button: always reports core events
[ 5.553] (**) Option "Device" "/dev/input/event2"
[ 5.553] (**) Option "_source" "server/udev"
[ 5.554] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5.554] (II) event2 - Power Button: device is a keyboard
[ 5.555] (II) event2 - Power Button: device removed
[ 5.573] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 5.573] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 5.573] (**) Option "xkb_model" "pc105"
[ 5.573] (**) Option "xkb_layout" "fr"
[ 5.573] (**) Option "xkb_variant" "latin9"
[ 5.576] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5.576] (II) event2 - Power Button: device is a keyboard
[ 5.577] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 5.577] (II) No input driver specified, ignoring this device.
[ 5.577] (II) This device may have been added with another device file.
[ 5.578] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 5.579] (II) No input driver specified, ignoring this device.
[ 5.579] (II) This device may have been added with another device file.
[ 5.579] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 5.579] (II) No input driver specified, ignoring this device.
[ 5.579] (II) This device may have been added with another device file.
[ 5.580] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 5.580] (II) No input driver specified, ignoring this device.
[ 5.580] (II) This device may have been added with another device file.
[ 5.581] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 5.581] (II) No input driver specified, ignoring this device.
[ 5.581] (II) This device may have been added with another device file.
[ 5.582] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event16)
[ 5.582] (II) No input driver specified, ignoring this device.
[ 5.582] (II) This device may have been added with another device file.
[ 5.582] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event17)
[ 5.582] (II) No input driver specified, ignoring this device.
[ 5.582] (II) This device may have been added with another device file.
[ 5.585] (II) config/udev: Adding input device Logitech Craft (/dev/input/event6)
[ 5.585] (**) Logitech Craft: Applying InputClass "libinput pointer catchall"
[ 5.585] (**) Logitech Craft: Applying InputClass "libinput keyboard catchall"
[ 5.585] (II) Using input driver 'libinput' for 'Logitech Craft'
[ 5.585] (**) Logitech Craft: always reports core events
[ 5.585] (**) Option "Device" "/dev/input/event6"
[ 5.585] (**) Option "_source" "server/udev"
[ 5.588] (II) event6 - Logitech Craft: is tagged by udev as: Keyboard Mouse
[ 5.588] (II) event6 - Logitech Craft: device is a pointer
[ 5.588] (II) event6 - Logitech Craft: device is a keyboard
[ 5.589] (II) event6 - Logitech Craft: device removed
[ 5.621] (II) libinput: Logitech Craft: needs a virtual subdevice
[ 5.621] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4066.0005/input/input26/event6"
[ 5.621] (II) XINPUT: Adding extended input device "Logitech Craft" (type: MOUSE, id 10)
[ 5.622] (**) Option "AccelerationScheme" "none"
[ 5.622] (**) Logitech Craft: (accel) selected scheme none/0
[ 5.622] (**) Logitech Craft: (accel) acceleration factor: 2.000
[ 5.622] (**) Logitech Craft: (accel) acceleration threshold: 4
[ 5.625] (II) event6 - Logitech Craft: is tagged by udev as: Keyboard Mouse
[ 5.626] (II) event6 - Logitech Craft: device is a pointer
[ 5.626] (II) event6 - Logitech Craft: device is a keyboard
[ 5.627] (II) config/udev: Adding input device Logitech Craft (/dev/input/mouse1)
[ 5.627] (II) No input driver specified, ignoring this device.
[ 5.627] (II) This device may have been added with another device file.
[ 5.627] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/event5)
[ 5.627] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall"
[ 5.627] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall"
[ 5.627] (II) Using input driver 'libinput' for 'Logitech MX Master 2S'
[ 5.628] (**) Logitech MX Master 2S: always reports core events
[ 5.628] (**) Option "Device" "/dev/input/event5"
[ 5.628] (**) Option "_source" "server/udev"
[ 5.629] (II) event5 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse
[ 5.629] (II) event5 - Logitech MX Master 2S: device is a pointer
[ 5.629] (II) event5 - Logitech MX Master 2S: device is a keyboard
[ 5.629] (II) event5 - Logitech MX Master 2S: device removed
[ 5.645] (II) libinput: Logitech MX Master 2S: needs a virtual subdevice
[ 5.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input25/event5"
[ 5.645] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: MOUSE, id 11)
[ 5.645] (**) Option "AccelerationScheme" "none"
[ 5.645] (**) Logitech MX Master 2S: (accel) selected scheme none/0
[ 5.645] (**) Logitech MX Master 2S: (accel) acceleration factor: 2.000
[ 5.645] (**) Logitech MX Master 2S: (accel) acceleration threshold: 4
[ 5.647] (II) event5 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse
[ 5.647] (II) event5 - Logitech MX Master 2S: device is a pointer
[ 5.647] (II) event5 - Logitech MX Master 2S: device is a keyboard
[ 5.649] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/mouse2)
[ 5.649] (II) No input driver specified, ignoring this device.
[ 5.649] (II) This device may have been added with another device file.
[ 5.649] (II) config/udev: Adding input device EasyCamera: EasyCamera (/dev/input/event11)
[ 5.649] (**) EasyCamera: EasyCamera: Applying InputClass "libinput keyboard catchall"
[ 5.649] (II) Using input driver 'libinput' for 'EasyCamera: EasyCamera'
[ 5.649] (**) EasyCamera: EasyCamera: always reports core events
[ 5.649] (**) Option "Device" "/dev/input/event11"
[ 5.649] (**) Option "_source" "server/udev"
[ 5.651] (II) event11 - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[ 5.651] (II) event11 - EasyCamera: EasyCamera: device is a keyboard
[ 5.651] (II) event11 - EasyCamera: EasyCamera: device removed
[ 5.685] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input31/event11"
[ 5.685] (II) XINPUT: Adding extended input device "EasyCamera: EasyCamera" (type: KEYBOARD, id 12)
[ 5.685] (**) Option "xkb_model" "pc105"
[ 5.685] (**) Option "xkb_layout" "fr"
[ 5.685] (**) Option "xkb_variant" "latin9"
[ 5.688] (II) event11 - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[ 5.689] (II) event11 - EasyCamera: EasyCamera: device is a keyboard
[ 5.690] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event9)
[ 5.690] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 5.690] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 5.690] (**) Ideapad extra buttons: always reports core events
[ 5.690] (**) Option "Device" "/dev/input/event9"
[ 5.690] (**) Option "_source" "server/udev"
[ 5.692] (II) event9 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 5.693] (II) event9 - Ideapad extra buttons: device is a keyboard
[ 5.693] (II) event9 - Ideapad extra buttons: device removed
[ 5.733] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input29/event9"
[ 5.733] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 13)
[ 5.733] (**) Option "xkb_model" "pc105"
[ 5.733] (**) Option "xkb_layout" "fr"
[ 5.733] (**) Option "xkb_variant" "latin9"
[ 5.736] (II) event9 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 5.736] (II) event9 - Ideapad extra buttons: device is a keyboard
[ 5.737] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event18)
[ 5.737] (II) No input driver specified, ignoring this device.
[ 5.737] (II) This device may have been added with another device file.
[ 5.738] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19)
[ 5.738] (II) No input driver specified, ignoring this device.
[ 5.738] (II) This device may have been added with another device file.
[ 5.739] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[ 5.739] (II) No input driver specified, ignoring this device.
[ 5.739] (II) This device may have been added with another device file.
[ 5.740] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 5.740] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.740] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 5.740] (**) AT Translated Set 2 keyboard: always reports core events
[ 5.740] (**) Option "Device" "/dev/input/event0"
[ 5.740] (**) Option "_source" "server/udev"
[ 5.742] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.743] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.744] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 5.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 5.757] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 5.757] (**) Option "xkb_model" "pc105"
[ 5.757] (**) Option "xkb_layout" "fr"
[ 5.757] (**) Option "xkb_variant" "latin9"
[ 5.760] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.760] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.763] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 5.763] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 5.763] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 5.763] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 5.763] (**) Option "Device" "/dev/input/event4"
[ 5.763] (**) Option "_source" "server/udev"
[ 5.765] (II) event4 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 5.767] (II) event4 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 5.768] (II) event4 - SynPS/2 Synaptics TouchPad: device removed
[ 5.806] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[ 5.806] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 5.807] (**) Option "AccelerationScheme" "none"
[ 5.807] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 5.807] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 5.807] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 5.809] (II) event4 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 5.812] (II) event4 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 5.813] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 5.813] (II) No input driver specified, ignoring this device.
[ 5.813] (II) This device may have been added with another device file.
[ 5.814] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 5.814] (II) No input driver specified, ignoring this device.
[ 5.814] (II) This device may have been added with another device file.
[ 5.840] (**) Logitech Craft: Applying InputClass "libinput pointer catchall"
[ 5.840] (**) Logitech Craft: Applying InputClass "libinput keyboard catchall"
[ 5.840] (II) Using input driver 'libinput' for 'Logitech Craft'
[ 5.840] (**) Logitech Craft: always reports core events
[ 5.840] (**) Option "Device" "/dev/input/event6"
[ 5.840] (**) Option "_source" "_driver/libinput"
[ 5.840] (II) libinput: Logitech Craft: is a virtual subdevice
[ 5.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4066.0005/input/input26/event6"
[ 5.840] (II) XINPUT: Adding extended input device "Logitech Craft" (type: KEYBOARD, id 16)
[ 5.840] (**) Option "xkb_model" "pc105"
[ 5.840] (**) Option "xkb_layout" "fr"
[ 5.840] (**) Option "xkb_variant" "latin9"
[ 5.840] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall"
[ 5.840] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall"
[ 5.840] (II) Using input driver 'libinput' for 'Logitech MX Master 2S'
[ 5.840] (**) Logitech MX Master 2S: always reports core events
[ 5.840] (**) Option "Device" "/dev/input/event5"
[ 5.840] (**) Option "_source" "_driver/libinput"
[ 5.840] (II) libinput: Logitech MX Master 2S: is a virtual subdevice
[ 5.841] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input25/event5"
[ 5.841] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: KEYBOARD, id 17)
[ 5.841] (**) Option "xkb_model" "pc105"
[ 5.841] (**) Option "xkb_layout" "fr"
[ 5.841] (**) Option "xkb_variant" "latin9"
[ 6.598] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 6.598] (II) modeset(0): Printing DDC gathered Modelines:
[ 6.598] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 6.600] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 6.600] (II) modeset(0): Printing DDC gathered Modelines:
[ 6.600] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 6.602] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 6.602] (II) modeset(0): Printing DDC gathered Modelines:
[ 6.602] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 6.981] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 6.981] (II) modeset(0): Printing DDC gathered Modelines:
[ 6.981] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 63.653] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 63.653] (II) modeset(0): Printing DDC gathered Modelines:
[ 63.653] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 69.830] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 69.830] (II) modeset(0): Printing DDC gathered Modelines:
[ 69.830] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 71.302] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 71.302] (II) modeset(0): Printing DDC gathered Modelines:
[ 71.302] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 71.759] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 71.759] (II) modeset(0): Printing DDC gathered Modelines:
[ 71.759] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 71.961] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 71.962] (II) modeset(0): Printing DDC gathered Modelines:
[ 71.962] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 81.624] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 81.624] (II) modeset(0): Printing DDC gathered Modelines:
[ 81.624] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 82.264] (--) modeset(G0): HDMI max TMDS frequency 300000KHz
[ 82.355] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 82.355] (II) modeset(0): Printing DDC gathered Modelines:
[ 82.355] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 232.714] (EE) event6 - Logitech Craft: client bug: event processing lagging behind by 36ms, your system is too slow
[ 378.637] (EE) event6 - Logitech Craft: client bug: event processing lagging behind by 20ms, your system is too slow
[ 452.513] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 452.513] (II) modeset(0): Printing DDC gathered Modelines:
[ 452.513] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 462.550] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 462.550] (II) modeset(0): Printing DDC gathered Modelines:
[ 462.550] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 496.433] (EE) event6 - Logitech Craft: client bug: event processing lagging behind by 35ms, your system is too slow
[ 520.496] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-6ms), your system is too slow
[ 520.496] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-19ms), your system is too slow
[ 542.345] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-11ms), your system is too slow
[ 542.345] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-24ms), your system is too slow
[ 567.481] (EE) event6 - Logitech Craft: client bug: event processing lagging behind by 12ms, your system is too slow
[ 573.699] (EE) event5 - Logitech MX Master 2S: client bug: event processing lagging behind by 18ms, your system is too slow
[ 574.513] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
[ 593.291] (EE) event5 - Logitech MX Master 2S: client bug: event processing lagging behind by 34ms, your system is too slow
[ 594.971] (EE) event5 - Logitech MX Master 2S: client bug: event processing lagging behind by 30ms, your system is too slow
[ 596.728] (EE) event5 - Logitech MX Master 2S: client bug: event processing lagging behind by 23ms, your system is too slow
[ 622.883] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 622.883] (II) modeset(0): Printing DDC gathered Modelines:
[ 622.884] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 626.594] (EE) event5 - Logitech MX Master 2S: client bug: event processing lagging behind by 28ms, your system is too slow
[ 626.594] (EE) event5 - Logitech MX Master 2S: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
[ 628.672] (EE) event6 - Logitech Craft: client bug: event processing lagging behind by 34ms, your system is too slow
[ 628.672] (EE) event6 - Logitech Craft: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
[ 647.979] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 647.979] (II) modeset(0): Printing DDC gathered Modelines:
[ 647.979] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 652.404] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-1ms), your system is too slow
[ 652.404] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-15ms), your system is too slow
[ 664.428] (II) modeset(0): EDID vendor "AUO", prod id 25069
[ 664.428] (II) modeset(0): Printing DDC gathered Modelines:
[ 664.428] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 668.786] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[ 682.084] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-10ms), your system is too slow
[ 734.622] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-8ms), your system is too slow
[ 734.622] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-21ms), your system is too slow
[ 749.612] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-14ms), your system is too slow
[ 749.612] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-27ms), your system is too slow
[ 785.106] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-8ms), your system is too slow
[ 785.106] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-21ms), your system is too slow
[ 812.178] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-12ms), your system is too slow
[ 812.178] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-25ms), your system is too slow
[ 884.572] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-1ms), your system is too slow
[ 884.572] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-14ms), your system is too slow
[ 929.808] (EE) client bug: timer event5 debounce: scheduled expiry is in the past (-13ms), your system is too slow
[ 929.808] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-26ms), your system is too slow
cat /var/log/Xorg.0.log | grep drm
[ 4.463] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.463] (II) xfree86: Adding drm device (/dev/dri/card0)
cat /var/log/Xorg.0.log | grep nouveau
[ 5.360] (II) modeset(G0): [DRI2] DRI driver: nouveau
[ 5.360] (II) modeset(G0): [DRI2] VDPAU driver: nouveau