Cet après-midi, mon ordinateur portable a planté deux fois. Je ne comprends pas pourquoi, ni comment trouver la source de ces "freezes" intempestifs et occasionnels.
Je décide donc de me tourner vers vous, n'étant pas très compétent tout seul.
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x74940018-0x74950057] usable ==> usable
[ 0.000000] e820: update [mem 0x74940018-0x74950057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000003efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001effffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000001f000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000074940017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000074940018-0x0000000074950057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000074950058-0x000000007992afff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007992b000-0x00000000799a5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000799a6000-0x000000007a0b1fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007a0b2000-0x000000007ae20fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007ae21000-0x000000007b8f3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007b8f4000-0x000000007baf8fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007baf9000-0x000000007bff6fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007bff7000-0x000000007bffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x7b7b8f98 ACPI=0x7a136000 ACPI 2.0=0x7a136000 SMBIOS=0x7b18d000 SMBIOS 3.0=0x7b18c000 TPMEventLog=0x74951018
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] Kernel is locked down from EFI secure boot; see https://wiki.debian.org/SecureBoot
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. E202SA/E202SA, BIOS E202SA.302 10/17/2016
[ 0.000000] tsc: Detected 1600.000 MHz processor
[ 0.000036] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000040] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000061] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000069] MTRR default type: uncachable
[ 0.000071] MTRR fixed ranges enabled:
[ 0.000075] 00000-9FFFF write-back
[ 0.000079] A0000-FFFFF uncachable
[ 0.000080] MTRR variable ranges enabled:
[ 0.000084] 0 base 000000000 mask F80000000 write-back
[ 0.000087] 1 base 07C800000 mask FFF800000 uncachable
[ 0.000089] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000092] 3 base 07E000000 mask FFE000000 uncachable
[ 0.000095] 4 base 100000000 mask F80000000 write-back
[ 0.000097] 5 base 090000000 mask FF0000000 write-through
[ 0.000099] 6 disabled
[ 0.000101] 7 disabled
[ 0.000406] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000537] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.009466] esrt: Reserving ESRT space from 0x000000007b7b8f98 to 0x000000007b7b8fd0.
[ 0.010996] RAMDISK: [mem 0x3cd4a000-0x3efd8fff]
[ 0.011009] ACPI: Early table checksum verification disabled
[ 0.011016] ACPI: RSDP 0x000000007A136000 000024 (v02 _ASUS_)
[ 0.011023] ACPI: XSDT 0x000000007A136098 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011036] ACPI: FACP 0x000000007A1480E8 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011047] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20180810/tbfadt-569)
[ 0.011057] ACPI: DSDT 0x000000007A1361D0 011F18 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[ 0.011065] ACPI: FACS 0x000000007AE1FE80 000040
[ 0.011073] ACPI: APIC 0x000000007A1481F8 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011079] ACPI: FPDT 0x000000007A148280 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011086] ACPI: FIDT 0x000000007A1482C8 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011092] ACPI: ECDT 0x000000007A148368 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000006)
[ 0.011099] ACPI: MCFG 0x000000007A148430 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.011105] ACPI: SSDT 0x000000007A148470 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.011112] ACPI: SSDT 0x000000007A148BD8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.011121] ACPI: SSDT 0x000000007A148E68 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.011130] ACPI: UEFI 0x000000007A148FE8 000042 (v01 _ASUS_ Notebook 00000000 00000000)
[ 0.011136] ACPI: LPIT 0x000000007A149030 000104 (v01 _ASUS_ Notebook 00000005 MSFT 0100000D)
[ 0.011143] ACPI: BGRT 0x000000007A149138 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011149] ACPI: TPM2 0x000000007A149170 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.011156] ACPI: CSRT 0x000000007A1491A8 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D)
[ 0.011162] ACPI: SSDT 0x000000007A1492F8 0005F3 (v01 CpuDpf CpuDptf 00001000 INTL 20061109)
[ 0.011171] ACPI: SSDT 0x000000007A1498F0 001AA3 (v01 DptfTb DptfTab 00001000 INTL 20061109)
[ 0.011177] ACPI: MSDM 0x000000007995AF18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.011198] ACPI: Local APIC address 0xfee00000
[ 0.011441] No NUMA configuration found
[ 0.011444] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.011455] NODE_DATA(0) allocated [mem 0x17fffa000-0x17fffefff]
[ 0.011529] Zone ranges:
[ 0.011532] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011536] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011539] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.011542] Device empty
[ 0.011544] Movable zone start for each node
[ 0.011546] Early memory node ranges
[ 0.011548] node 0: [mem 0x0000000000001000-0x000000000003efff]
[ 0.011550] node 0: [mem 0x0000000000040000-0x000000000009dfff]
[ 0.011552] node 0: [mem 0x0000000000100000-0x000000001effffff]
[ 0.011554] node 0: [mem 0x0000000020200000-0x000000007992afff]
[ 0.011556] node 0: [mem 0x00000000799a6000-0x000000007a0b1fff]
[ 0.011558] node 0: [mem 0x000000007b8f4000-0x000000007baf8fff]
[ 0.011560] node 0: [mem 0x000000007bff7000-0x000000007bffffff]
[ 0.011562] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.012954] Zeroed struct page in unavailable ranges: 28703 pages
[ 0.012959] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.012965] On node 0 totalpages: 1019873
[ 0.012968] DMA zone: 64 pages used for memmap
[ 0.012969] DMA zone: 21 pages reserved
[ 0.012972] DMA zone: 3996 pages, LIFO batch:0
[ 0.013259] DMA32 zone: 7682 pages used for memmap
[ 0.013261] DMA32 zone: 491589 pages, LIFO batch:63
[ 0.054711] Normal zone: 8192 pages used for memmap
[ 0.054713] Normal zone: 524288 pages, LIFO batch:63
[ 0.089618] Reserving Intel graphics memory at [mem 0x7ce00000-0x7edfffff]
[ 0.089759] ACPI: PM-Timer IO Port: 0x408
[ 0.089763] ACPI: Local APIC address 0xfee00000
[ 0.089777] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.089779] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.089781] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.089783] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.089802] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.089806] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.089810] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.089813] ACPI: IRQ0 used by override.
[ 0.089816] ACPI: IRQ9 used by override.
[ 0.089821] Using ACPI (MADT) for SMP configuration information
[ 0.089838] e820: update [mem 0x78670000-0x78688fff] usable ==> reserved
[ 0.089865] TSC deadline timer available
[ 0.089868] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.089960] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.089966] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[ 0.089971] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.089973] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.089977] PM: Registered nosave memory: [mem 0x1f000000-0x201fffff]
[ 0.089982] PM: Registered nosave memory: [mem 0x74940000-0x74940fff]
[ 0.089987] PM: Registered nosave memory: [mem 0x74950000-0x74950fff]
[ 0.089992] PM: Registered nosave memory: [mem 0x78670000-0x78688fff]
[ 0.089997] PM: Registered nosave memory: [mem 0x7992b000-0x799a5fff]
[ 0.090002] PM: Registered nosave memory: [mem 0x7a0b2000-0x7ae20fff]
[ 0.090004] PM: Registered nosave memory: [mem 0x7ae21000-0x7b8f3fff]
[ 0.090009] PM: Registered nosave memory: [mem 0x7baf9000-0x7bff6fff]
[ 0.090014] PM: Registered nosave memory: [mem 0x7c000000-0x7cdfffff]
[ 0.090016] PM: Registered nosave memory: [mem 0x7ce00000-0x7edfffff]
[ 0.090017] PM: Registered nosave memory: [mem 0x7ee00000-0xdfffffff]
[ 0.090019] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.090021] PM: Registered nosave memory: [mem 0xf0000000-0xfe9fffff]
[ 0.090023] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[ 0.090024] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.090026] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.090028] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.090029] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.090031] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ 0.090033] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ 0.090034] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff]
[ 0.090036] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff]
[ 0.090038] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff]
[ 0.090039] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[ 0.090041] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[ 0.090043] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ 0.090044] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[ 0.090046] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[ 0.090048] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[ 0.090049] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.090051] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.090053] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.090057] [mem 0x7ee00000-0xdfffffff] available for PCI devices
[ 0.090060] Booting paravirtualized kernel on bare hardware
[ 0.090066] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.377008] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0
[ 0.377037] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.377878] percpu: Embedded 45 pages/cpu s144536 r8192 d31592 u524288
[ 0.377903] pcpu-alloc: s144536 r8192 d31592 u524288 alloc=1*2097152
[ 0.377906] pcpu-alloc: [0] 0 1 2 3
[ 0.377976] Built 1 zonelists, mobility grouping on. Total pages: 1003914
[ 0.377979] Policy zone: Normal
[ 0.377983] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-16-amd64 root=UUID=852b907d-000d-4e97-a410-9cb579a58357 ro quiet
[ 0.399711] Calgary: detecting Calgary via BIOS EBDA area
[ 0.399715] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.431910] Memory: 3810580K/4079492K available (10252K kernel code, 1242K rwdata, 3328K rodata, 1600K init, 2260K bss, 268912K reserved, 0K cma-reserved)
[ 0.432245] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.432264] Kernel/User page tables isolation: enabled
[ 0.432395] ftrace: allocating 31978 entries in 125 pages
[ 0.458504] rcu: Hierarchical RCU implementation.
[ 0.458509] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.458512] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.467583] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[ 0.468016] Console: colour dummy device 80x25
[ 0.468024] console [tty0] enabled
[ 0.468082] ACPI: Core revision 20180810
[ 0.468458] APIC: Switch to symmetric I/O mode setup
[ 0.470052] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.488455] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.488482] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[ 0.488488] pid_max: default: 32768 minimum: 301
[ 0.490679] Security Framework initialized
[ 0.490683] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.490726] AppArmor: AppArmor initialized
[ 0.492512] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.493429] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.493500] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.493531] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.494069] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.494072] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.494108] CPU0: Thermal monitoring enabled (TM1)
[ 0.494117] process: using mwait in idle threads
[ 0.494124] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.494126] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.494129] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.494133] Spectre V2 : Mitigation: Full generic retpoline
[ 0.494134] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.494192] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.494544] Freeing SMP alternatives memory: 24K
[ 0.506093] smpboot: CPU0: Intel(R) Pentium(R) CPU N3710 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[ 0.506457] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.506482] ... version: 3
[ 0.506484] ... bit width: 40
[ 0.506485] ... generic registers: 2
[ 0.506487] ... value mask: 000000ffffffffff
[ 0.506489] ... max period: 0000007fffffffff
[ 0.506490] ... fixed-purpose events: 3
[ 0.506493] ... event mask: 0000000700000003
[ 0.506607] rcu: Hierarchical SRCU implementation.
[ 0.507540] random: crng done (trusting CPU's manufacturer)
[ 0.508096] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.508273] smp: Bringing up secondary CPUs ...
[ 0.508459] x86: Booting SMP configuration:
[ 0.508459] .... node #0, CPUs: #1 #2 #3
[ 0.508589] smp: Brought up 1 node, 4 CPUs
[ 0.508589] smpboot: Max logical packages: 1
[ 0.508589] smpboot: Total of 4 processors activated (12800.00 BogoMIPS)
[ 0.509906] devtmpfs: initialized
[ 0.509906] x86/mm: Memory block size: 128MB
[ 0.509906] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
[ 0.509906] PM: Registering ACPI NVS region [mem 0x7a0b2000-0x7ae20fff] (14086144 bytes)
[ 0.512575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.512606] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.512719] pinctrl core: initialized pinctrl subsystem
[ 0.513156] NET: Registered protocol family 16
[ 0.513369] audit: initializing netlink subsys (disabled)
[ 0.513395] audit: type=2000 audit(1620400353.048:1): state=initialized audit_enabled=0 res=1
[ 0.513395] cpuidle: using governor ladder
[ 0.513395] cpuidle: using governor menu
[ 0.513395] ACPI: bus type PCI registered
[ 0.513395] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.513395] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.513395] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.513395] PCI: Using configuration type 1 for base access
[ 0.516547] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.516663] ACPI: Added _OSI(Module Device)
[ 0.516665] ACPI: Added _OSI(Processor Device)
[ 0.516667] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.516669] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.516671] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.516673] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.516681] ACPI: EC: EC started
[ 0.516683] ACPI: EC: interrupt blocked
[ 0.516708] ACPI: \: Used as first EC
[ 0.516712] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.516716] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.543603] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.549346] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.552951] ACPI: Dynamic OEM Table Load:
[ 0.552969] ACPI: SSDT 0xFFFF9656BAAE4800 0006D9 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.554006] ACPI: Dynamic OEM Table Load:
[ 0.554017] ACPI: SSDT 0xFFFF9656BAB59000 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.555144] ACPI: Dynamic OEM Table Load:
[ 0.555154] ACPI: SSDT 0xFFFF9656BAAF5400 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.555717] ACPI: Dynamic OEM Table Load:
[ 0.555726] ACPI: SSDT 0xFFFF9656BAACEC00 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.557945] ACPI: Interpreter enabled
[ 0.558005] ACPI: (supports S0 S3 S4 S5)
[ 0.558008] ACPI: Using IOAPIC for interrupt routing
[ 0.558085] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.558988] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.562485] ACPI: Power Resource [ID3C] (off)
[ 0.564551] ACPI: Power Resource [USBC] (on)
[ 0.574195] ACPI: Power Resource [CLK0] (off)
[ 0.574584] ACPI: Power Resource [CLK0] (off)
[ 0.574691] ACPI: Power Resource [CLK1] (off)
[ 0.585730] ACPI: Power Resource [FN00] (off)
[ 0.587328] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.587339] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.588236] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.589299] PCI host bridge to bus 0000:00
[ 0.589307] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.589311] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.589314] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.589319] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.589322] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.589325] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.589328] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.589331] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.589337] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.589359] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.589754] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.589785] pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff 64bit]
[ 0.589799] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.589810] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.589844] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.590133] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[ 0.590160] pci 0000:00:0b.0: reg 0x10: [mem 0x81321000-0x81321fff 64bit]
[ 0.590533] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.590602] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.590615] pci 0000:00:13.0: reg 0x24: [mem 0x8131e000-0x8131e7ff]
[ 0.590683] pci 0000:00:13.0: PME# supported from D3hot
[ 0.590933] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.590968] pci 0000:00:14.0: reg 0x10: [mem 0x81300000-0x8130ffff 64bit]
[ 0.591071] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.591354] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.591383] pci 0000:00:1a.0: reg 0x10: [mem 0x81100000-0x811fffff]
[ 0.591396] pci 0000:00:1a.0: reg 0x14: [mem 0x81000000-0x810fffff]
[ 0.591495] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.591786] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.591825] pci 0000:00:1b.0: reg 0x10: [mem 0x81310000-0x81313fff 64bit]
[ 0.591934] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.592196] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.592348] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.592636] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.593000] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.593072] pci 0000:00:1f.3: reg 0x10: [mem 0x81318000-0x8131801f]
[ 0.593188] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.593747] pci 0000:01:00.0: [10ec:8821] type 00 class 0x028000
[ 0.593809] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.593863] pci 0000:01:00.0: reg 0x18: [mem 0x81200000-0x81203fff 64bit]
[ 0.594084] pci 0000:01:00.0: supports D1 D2
[ 0.594087] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.594408] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.594415] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.594421] pci 0000:00:1c.0: bridge window [mem 0x81200000-0x812fffff]
[ 1.620059] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 1.620216] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.620376] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.620543] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.620705] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.620863] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.621019] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.621178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.625722] ACPI: EC: interrupt unblocked
[ 1.625759] ACPI: EC: event unblocked
[ 1.625782] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.625785] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.625963] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.625963] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.625963] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.625963] vgaarb: loaded
[ 1.625963] pps_core: LinuxPPS API ver. 1 registered
[ 1.625963] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.625963] PTP clock support registered
[ 1.625963] EDAC MC: Ver: 3.0.0
[ 1.625963] Registered efivars operations
[ 1.625963] PCI: Using ACPI for IRQ routing
[ 1.642338] PCI: pci_cache_line_size set to 64 bytes
[ 1.642436] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[ 1.642439] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.642442] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[ 1.642443] e820: reserve RAM buffer [mem 0x74940018-0x77ffffff]
[ 1.642445] e820: reserve RAM buffer [mem 0x78670000-0x7bffffff]
[ 1.642448] e820: reserve RAM buffer [mem 0x7992b000-0x7bffffff]
[ 1.642450] e820: reserve RAM buffer [mem 0x7a0b2000-0x7bffffff]
[ 1.642452] e820: reserve RAM buffer [mem 0x7baf9000-0x7bffffff]
[ 1.642707] clocksource: Switched to clocksource tsc-early
[ 1.668116] VFS: Disk quotas dquot_6.6.0
[ 1.668154] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.668422] AppArmor: AppArmor Filesystem Enabled
[ 1.668482] pnp: PnP ACPI init
[ 1.668636] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.669257] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.669262] system 00:01: [io 0x0400-0x047f] has been reserved
[ 1.669266] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 1.669278] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.669409] system 00:02: [io 0x0240-0x0259] has been reserved
[ 1.669421] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.669544] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 1.672114] system 00:04: [mem 0x8131f000-0x8131ffff] has been reserved
[ 1.672119] system 00:04: [mem 0x8131d000-0x8131dfff] has been reserved
[ 1.672123] system 00:04: [mem 0x8131b000-0x8131bfff] has been reserved
[ 1.672126] system 00:04: [mem 0x81319000-0x81319fff] has been reserved
[ 1.672140] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.672255] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.672259] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[ 1.672265] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 1.672268] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 1.672272] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[ 1.672276] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[ 1.672280] system 00:05: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 1.672284] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.672287] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.672298] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.673720] pnp: PnP ACPI: found 6 devices
[ 1.683365] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.683391] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.683399] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 1.683412] pci 0000:00:1c.0: bridge window [mem 0x81200000-0x812fffff]
[ 1.683430] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.683435] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.683438] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.683442] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.683445] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.683449] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.683453] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 1.683458] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 1.683462] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.683465] pci_bus 0000:01: resource 1 [mem 0x81200000-0x812fffff]
[ 1.683757] NET: Registered protocol family 2
[ 1.684175] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 1.684226] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.684393] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.684614] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.684739] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.684786] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.684941] NET: Registered protocol family 1
[ 1.684967] NET: Registered protocol family 44
[ 1.685002] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.685555] PCI: CLS 64 bytes, default 64
[ 1.685678] Unpacking initramfs...
[ 2.962278] Freeing initrd memory: 35388K
[ 2.962387] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.962392] software IO TLB: mapped [mem 0x70940000-0x74940000] (64MB)
[ 2.962466] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 2.962524] clocksource: Switched to clocksource tsc
[ 2.964135] Initialise system trusted keyrings
[ 2.964178] Key type blacklist registered
[ 2.964329] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 2.967911] zbud: loaded
[ 3.449015] Key type asymmetric registered
[ 3.449020] Asymmetric key parser 'x509' registered
[ 3.449053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.449127] io scheduler noop registered
[ 3.449130] io scheduler deadline registered
[ 3.449228] io scheduler cfq registered (default)
[ 3.449234] io scheduler mq-deadline registered
[ 3.450056] pcieport 0000:00:1c.0: Signaling PME with IRQ 115
[ 3.450217] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.450268] efifb: probing for efifb
[ 3.450301] efifb: framebuffer at 0x90000000, using 1876k, total 1875k
[ 3.450304] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 3.450305] efifb: scrolling: redraw
[ 3.450308] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.454220] Console: switching to colour frame buffer device 100x37
[ 3.457881] fb0: EFI VGA frame buffer device
[ 3.457908] intel_idle: MWAIT substates: 0x33000020
[ 3.457912] intel_idle: v0.4.1 model 0x4C
[ 3.458450] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.462269] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.483063] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.484971] Linux agpgart interface v0.103
[ 3.485086] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 3.485089] AMD IOMMUv2 functionality not available on this system
[ 3.486928] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 3.486931] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.488004] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.488341] mousedev: PS/2 mouse device common for all mice
[ 3.488538] rtc_cmos 00:00: RTC can wake from S4
[ 3.489030] rtc_cmos 00:00: registered as rtc0
[ 3.489076] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram
[ 3.489103] intel_pstate: Intel P-state driver initializing
[ 3.490214] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.493057] NET: Registered protocol family 10
[ 3.520716] Segment Routing with IPv6
[ 3.520773] mip6: Mobile IPv6
[ 3.520779] NET: Registered protocol family 17
[ 3.521177] mpls_gso: MPLS GSO support
[ 3.522398] mce: Using 6 MCE banks
[ 3.522565] microcode: sig=0x406c4, pf=0x1, revision=0x40a
[ 3.522999] microcode: Microcode Update Driver: v2.2.
[ 3.523059] sched_clock: Marking stable (3526475400, -3490587)->(3528498600, -5513787)
[ 3.523897] registered taskstats version 1
[ 3.523899] Loading compiled-in X.509 certificates
[ 3.528030] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.598005] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.598151] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 3.601714] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[ 3.603951] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[ 3.604183] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 3.604380] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 3.606662] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 3.608623] zswap: loaded using pool lzo/zbud
[ 3.609200] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.609896] rtc_cmos 00:00: setting system clock to 2021-05-07 15:12:36 UTC (1620400356)
[ 3.609979] Lockdown: Hibernation is restricted; see https://wiki.debian.org/SecureBoot
[ 3.617739] Freeing unused kernel image memory: 1600K
[ 3.633048] Write protecting the kernel read-only data: 16384k
[ 3.636668] Freeing unused kernel image memory: 2028K
[ 3.637990] Freeing unused kernel image memory: 768K
[ 3.660633] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.660850] x86/mm: Checking user space page tables
[ 3.678975] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.678978] Run /init as init process
[ 3.944682] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.944697] ACPI: Lid Switch [LID]
[ 3.944788] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 3.944812] ACPI: Sleep Button [SLPB]
[ 3.944888] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.944902] ACPI: Power Button [PWRF]
[ 3.976032] sdhci: Secure Digital Host Controller Interface driver
[ 3.976034] sdhci: Copyright(c) Pierre Ossman
[ 3.984916] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.988933] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.988937] ACPI: Thermal Zone [TZ01] (27 C)
[ 3.990190] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.990193] ACPI: Thermal Zone [THRM] (0 C)
[ 3.996334] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.999575] i2c_hid i2c-ELAN1000:00: i2c-ELAN1000:00 supply vdd not found, using dummy regulator
[ 3.999603] i2c_hid i2c-ELAN1000:00: Linked as a consumer to regulator.0
[ 3.999605] i2c_hid i2c-ELAN1000:00: i2c-ELAN1000:00 supply vddl not found, using dummy regulator
[ 4.015312] SCSI subsystem initialized
[ 4.019003] ACPI: bus type USB registered
[ 4.019052] usbcore: registered new interface driver usbfs
[ 4.019067] usbcore: registered new interface driver hub
[ 4.019089] usbcore: registered new device driver usb
[ 4.020177] cryptd: max_cpu_qlen set to 1000
[ 4.043783] SSE version of gcm_enc/dec engaged.
[ 4.048533] libata version 3.00 loaded.
[ 4.057873] ahci 0000:00:13.0: version 3.0
[ 4.058230] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 4.058235] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
[ 4.060877] scsi host0: ahci
[ 4.062837] scsi host1: ahci
[ 4.063010] ata1: SATA max UDMA/133 abar m2048@0x8131e000 port 0x8131e100 irq 117
[ 4.063013] ata2: SATA max UDMA/133 abar m2048@0x8131e000 port 0x8131e180 irq 117
[ 4.065781] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.065793] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 4.067220] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[ 4.067291] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 4.067608] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 4.067611] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.067613] usb usb1: Product: xHCI Host Controller
[ 4.067615] usb usb1: Manufacturer: Linux 4.19.0-16-amd64 xhci-hcd
[ 4.067616] usb usb1: SerialNumber: 0000:00:14.0
[ 4.067847] hub 1-0:1.0: USB hub found
[ 4.067871] hub 1-0:1.0: 7 ports detected
[ 4.069413] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.069422] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.069429] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 4.069515] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 4.069518] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.069520] usb usb2: Product: xHCI Host Controller
[ 4.069521] usb usb2: Manufacturer: Linux 4.19.0-16-amd64 xhci-hcd
[ 4.069523] usb usb2: SerialNumber: 0000:00:14.0
[ 4.069720] hub 2-0:1.0: USB hub found
[ 4.069742] hub 2-0:1.0: 6 ports detected
[ 4.070422] usb: port power management may be unreliable
[ 4.192054] checking generic (90000000 1d5000) vs hw (90000000 10000000)
[ 4.192057] fb: switching to inteldrmfb from EFI VGA
[ 4.192094] Console: switching to colour dummy device 80x25
[ 4.193164] [drm] Replacing VGA console driver
[ 4.193313] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.193314] [drm] Driver supports precise vblank timestamp query.
[ 4.195632] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.378769] ata2: SATA link down (SStatus 4 SControl 300)
[ 4.378809] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.380123] ata1.00: ATA-8: HGST HTS541010A7E630, SE0OA4H0, max UDMA/133
[ 4.380126] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 4.381538] ata1.00: configured for UDMA/133
[ 4.381937] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A7 A4H0 PQ: 0 ANSI: 5
[ 4.390671] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.390675] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.390688] sd 0:0:0:0: [sda] Write Protect is off
[ 4.390691] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.390710] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.404492] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 4.413242] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 4.414647] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.419800] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 4.446735] sda: sda1 sda2 sda3
[ 4.447287] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.556203] usb 1-2: New USB device found, idVendor=2717, idProduct=ff40, bcdDevice= 4.04
[ 4.556215] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.556226] usb 1-2: Product: SDM636-MTP _SN:76749E31
[ 4.556235] usb 1-2: Manufacturer: Xiaomi
[ 4.556242] usb 1-2: SerialNumber: 5607029
[ 4.684812] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[ 4.700318] fbcon: inteldrmfb (fb0) is primary device
[ 4.839237] usb 1-3: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[ 4.839251] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.839262] usb 1-3: Product: USB Receiver
[ 4.839270] usb 1-3: Manufacturer: Logitech
[ 4.860849] usbcore: registered new interface driver usbhid
[ 4.860851] usbhid: USB HID core driver
[ 4.866269] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C534.0001/input/input5
[ 4.926294] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[ 4.928172] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input6
[ 4.929018] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input7
[ 4.968805] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 4.989167] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input8
[ 4.990385] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[ 5.011172] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 5.123103] usb 1-4: New USB device found, idVendor=0bda, idProduct=0821, bcdDevice= 2.00
[ 5.123117] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.123128] usb 1-4: Product: Bluetooth Radio
[ 5.123136] usb 1-4: Manufacturer: Realtek
[ 5.123144] usb 1-4: SerialNumber: 00e04c000001
[ 5.252806] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[ 5.427687] usb 1-5: New USB device found, idVendor=0bda, idProduct=57ed, bcdDevice= 0.01
[ 5.427700] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.427711] usb 1-5: Product: USB2.0 VGA UVC WebCam
[ 5.427721] usb 1-5: Manufacturer: 04081-0005490016401002860
[ 5.427729] usb 1-5: SerialNumber: 200901010001
[ 5.981076] Console: switching to colour frame buffer device 170x48
[ 6.011628] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 21.672430] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 23.689525] systemd[1]: Inserted module 'autofs4'
[ 24.086808] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 24.105311] systemd[1]: Detected architecture x86-64.
[ 24.149061] systemd[1]: Set hostname to <ASUS>.
[ 24.163755] Lockdown: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot
[ 24.224521] Lockdown: BPF is restricted; see https://wiki.debian.org/SecureBoot
[ 25.125569] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 25.125580] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 25.924548] systemd[1]: Reached target Remote File Systems.
[ 25.924979] systemd[1]: Listening on Syslog Socket.
[ 25.925159] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 25.928748] systemd[1]: Created slice User and Session Slice.
[ 25.928786] systemd[1]: Reached target Slices.
[ 26.348563] lp: driver loaded but no devices found
[ 26.513462] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 26.533638] ppdev: user-space parallel port driver
[ 26.812678] systemd-journald[274]: Received request to flush runtime journal from PID 1
[ 28.267793] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input11
[ 28.312546] elan_i2c i2c-ELAN1000:00: i2c-ELAN1000:00 supply vcc not found, using dummy regulator
[ 28.354992] ACPI: AC Adapter [AC0] (off-line)
[ 28.393514] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 28.422091] iTCO_vendor_support: vendor-support=0
[ 28.446899] proc_thermal 0000:00:0b.0: Creating sysfs group for PROC_THERMAL_PCI
[ 28.478515] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 28.478629] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[ 28.478854] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 28.481613] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 28.484540] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 28.522903] EFI Variables Facility v0.08 2004-May-17
[ 28.543214] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 28.551807] pstore: Using compression: deflate
[ 28.551831] pstore: Registered efi as persistent store backend
[ 28.642795] elan_i2c i2c-ELAN1000:00: Elan Touchpad: Module ID: 0x0009, Firmware: 0x0004, Sample: 0x000b, IAP: 0x000e
[ 28.643059] input: Elan Touchpad as /devices/pci0000:00/808622C1:03/i2c-0/i2c-ELAN1000:00/input/input13
[ 28.691281] asus_wmi: ASUS WMI generic driver loaded
[ 28.699276] asus_wmi: Initialization: 0x1
[ 28.699339] asus_wmi: BIOS WMI version: 7.9
[ 28.699406] asus_wmi: SFUN value: 0xa0877
[ 28.701134] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
[ 28.706255] asus_wmi: Number of fans: 1
[ 28.938665] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 29.268208] Bluetooth: Core ver 2.22
[ 29.268271] NET: Registered protocol family 31
[ 29.268273] Bluetooth: HCI device and connection manager initialized
[ 29.268279] Bluetooth: HCI socket layer initialized
[ 29.268282] Bluetooth: L2CAP socket layer initialized
[ 29.268293] Bluetooth: SCO socket layer initialized
[ 29.615943] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 29.684082] usbcore: registered new interface driver btusb
[ 29.688101] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
[ 29.689064] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 29.689069] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8821a_fw.bin
[ 29.861538] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
[ 29.861684] bluetooth hci0: firmware: failed to load rtl_bt/rtl8821a_fw.bin (-2)
[ 29.861766] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 29.861843] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_fw.bin failed with error -2
[ 29.861848] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8821a_fw.bin not found
[ 29.862702] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 29.862705] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 29.862707] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 29.862708] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 29.862710] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 29.862712] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 29.862714] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 29.865872] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 29.935695] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 29.935818] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 29.935912] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 30.050256] intel_rapl: Found RAPL domain package
[ 30.050259] intel_rapl: Found RAPL domain core
[ 30.240360] media: Linux media interface: v0.10
[ 30.391856] videodev: Linux video capture interface: v2.00
[ 30.741070] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
[ 30.741082] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[ 30.741137] rtl8821ae 0000:01:00.0: firmware: failed to load rtlwifi/rtl8821aefw_29.bin (-2)
[ 30.741224] rtl8821ae 0000:01:00.0: Direct firmware load for rtlwifi/rtl8821aefw_29.bin failed with error -2
[ 30.741240] rtl8821ae 0000:01:00.0: firmware: failed to load rtlwifi/rtl8821aefw.bin (-2)
[ 30.741308] rtl8821ae 0000:01:00.0: Direct firmware load for rtlwifi/rtl8821aefw.bin failed with error -2
[ 30.741310] rtlwifi: Loading alternative firmware rtlwifi/rtl8821aefw.bin
[ 30.741512] rtl8821ae 0000:01:00.0: firmware: failed to load rtlwifi/rtl8821aefw_wowlan.bin (-2)
[ 30.741587] rtl8821ae 0000:01:00.0: Direct firmware load for rtlwifi/rtl8821aefw_wowlan.bin failed with error -2
[ 30.741600] rtl8821ae 0000:01:00.0: firmware: failed to load rtlwifi/rtl8821aefw.bin (-2)
[ 30.741667] rtl8821ae 0000:01:00.0: Direct firmware load for rtlwifi/rtl8821aefw.bin failed with error -2
[ 30.741669] rtlwifi: Loading alternative firmware rtlwifi/rtl8821aefw.bin
[ 30.880011] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 30.880356] rtlwifi: rtlwifi: wireless switch is on
[ 31.035269] rtl8821ae 0000:01:00.0 wlp1s0: renamed from wlan0
[ 31.163460] usb 1-2: USB disconnect, device number 2
[ 31.331201] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (0bda:57ed)
[ 31.335014] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18
[ 31.335167] usbcore: registered new interface driver uvcvideo
[ 31.335168] USB Video Class driver (1.1.1)
[ 32.731473] Adding 4079612k swap on /dev/sda3. Priority:-2 extents:1 across:4079612k FS
[ 34.832810] audit: type=1400 audit(1620400387.720:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=494 comm="apparmor_parser"
[ 34.832819] audit: type=1400 audit(1620400387.720:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=494 comm="apparmor_parser"
[ 34.832824] audit: type=1400 audit(1620400387.720:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=494 comm="apparmor_parser"
[ 34.833407] audit: type=1400 audit(1620400387.720:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=491 comm="apparmor_parser"
[ 34.852505] audit: type=1400 audit(1620400387.736:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=493 comm="apparmor_parser"
[ 34.852514] audit: type=1400 audit(1620400387.740:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=493 comm="apparmor_parser"
[ 34.852519] audit: type=1400 audit(1620400387.740:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=493 comm="apparmor_parser"
[ 34.864622] audit: type=1400 audit(1620400387.752:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=497 comm="apparmor_parser"
[ 34.864631] audit: type=1400 audit(1620400387.752:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=497 comm="apparmor_parser"
[ 34.909069] audit: type=1400 audit(1620400387.796:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=500 comm="apparmor_parser"
[ 40.436994] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.436997] Bluetooth: BNEP filters: protocol multicast
[ 40.437003] Bluetooth: BNEP socket layer initialized
[ 42.780519] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 42.938335] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000306 .
[ 43.044748] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 43.307556] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000306 .
[ 43.414084] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 44.407609] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 45.265365] Lockdown: ioperm is restricted; see https://wiki.debian.org/SecureBoot
[ 47.368912] broken atomic modeset userspace detected, disabling atomic
[ 99.018976] fuse init (API version 7.27)
[ 389.210724] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000306 .
[ 389.315778] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 463.744634] usb 1-2: new high-speed USB device number 7 using xhci_hcd
[ 463.895529] usb 1-2: New USB device found, idVendor=2717, idProduct=ff80, bcdDevice= 4.04
[ 463.895546] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 463.895557] usb 1-2: Product: SDM636-MTP _SN:76749E31
[ 463.895566] usb 1-2: Manufacturer: Xiaomi
[ 463.895575] usb 1-2: SerialNumber: 5607029
[ 464.052313] usbcore: registered new interface driver cdc_ether
[ 464.059367] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, da:eb:7a:63:90:09
[ 464.059466] usbcore: registered new interface driver rndis_host
[ 464.080541] rndis_host 1-2:1.0 enp0s20u2: renamed from usb0
[ 464.133748] IPv6: ADDRCONF(NETDEV_UP): enp0s20u2: link is not ready
[ 705.547648] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000306 .
[ 705.652665] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 726.834592] kauditd_printk_skb: 6 callbacks suppressed
[ 726.834596] audit: type=1400 audit(1620401079.396:18): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/fonts-elusive-icons/fonts/elusiveicons-webfont.ttf" pid=1383 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 726.847249] audit: type=1400 audit(1620401079.408:19): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/fonts-elusive-icons/fonts/elusiveicons-webfont.ttf" pid=1383 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1021.491763] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000306 .
[ 1021.596568] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 1337.533243] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000306 .
[ 1337.638278] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 1526.136148] asus_wmi: Unknown key cf pressed
[ 1527.203614] usb 1-2: USB disconnect, device number 7
[ 1527.203985] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device
[ 1528.672511] usb 1-2: new high-speed USB device number 8 using xhci_hcd
[ 1528.824315] usb 1-2: New USB device found, idVendor=2717, idProduct=ff40, bcdDevice= 4.04
[ 1528.824333] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1528.824344] usb 1-2: Product: SDM636-MTP _SN:76749E31
[ 1528.824353] usb 1-2: Manufacturer: Xiaomi
[ 1528.824361] usb 1-2: SerialNumber: 5607029
[ 1534.608858] usb 1-2: USB disconnect, device number 8
[ 1535.684420] usb 1-2: new high-speed USB device number 9 using xhci_hcd
[ 1535.835428] usb 1-2: New USB device found, idVendor=2717, idProduct=ff40, bcdDevice= 4.04
[ 1535.835439] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1535.835446] usb 1-2: Product: SDM636-MTP _SN:76749E31
[ 1535.835451] usb 1-2: Manufacturer: Xiaomi
[ 1535.835456] usb 1-2: SerialNumber: 5607029
[ 1538.749037] usb 1-2: USB disconnect, device number 9
[ 1539.204366] usb 1-2: new high-speed USB device number 10 using xhci_hcd
[ 1539.332609] usb 1-2: Device not responding to setup address.
[ 1539.540260] usb 1-2: Device not responding to setup address.
[ 1539.748344] usb 1-2: device not accepting address 10, error -71
[ 1546.672098] usb 1-2: new high-speed USB device number 12 using xhci_hcd
[ 1546.824275] usb 1-2: New USB device found, idVendor=2717, idProduct=ff80, bcdDevice= 4.04
[ 1546.824291] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1546.824302] usb 1-2: Product: SDM636-MTP _SN:76749E31
[ 1546.824311] usb 1-2: Manufacturer: Xiaomi
[ 1546.824320] usb 1-2: SerialNumber: 5607029
[ 1546.838805] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, 3e:9b:14:cd:53:a6
[ 1546.870510] rndis_host 1-2:1.0 enp0s20u2: renamed from usb0
[ 1546.927938] IPv6: ADDRCONF(NETDEV_UP): enp0s20u2: link is not ready
[ 1653.552307] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 1969.519540] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000306 .
[ 1969.624487] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready