[résolu] Hiberner ne fonctionne pas

totoZero7 · 18-02-2022 18:29:44

Bonjour,

sous debian Mate, pour mettre en hibernation
je clique sur Système > Éteindre > Hiberner

...j'attends un peu... et ça me met la page de login avec le mot de passe à mettre, et ça reste ainsi. L'ordi ne s'arrête pas.
Si je mets le mot de passe, j'entre dans ma session et les taches que j'utilisais sont présentes.

Je me souviens avoir testé cette fonction avec l'autre "mettre en veille" pour voir la différence. Je préférais mettre en hibernation car le contenu était sur le disque (SSD ici) et ça me demandait de déchiffrer le disque avant de lancer le système, ce que l'autre ne fait pas car il demande seulement le passe du login.
J'avais déjà eu des échecs pour le faire fonctionner puis un jour ça a marché. Je me suis arrêté là croyant que c'était réglé.

Sauf, que aujourd'hui, j'ai voulu à nouveau mettre en hibernation et ça n'a pas fonctionné.
Du coup je viens demander de l'aide.
j'ai regardé différents posts sur le sujet mais n'ai rien vu de semblable à mon problème.

Dernière modification par totoZero7 (14-06-2022 20:46:48)

VBrice · 18-02-2022 21:52:47

Bonjour,
si tu fait un

systemctl hibernate

que donne la commande dmesg?

totoZero7 · 18-02-2022 21:58:09

(dmesg ne marche pas en simple user)

dmesg

[    0.000000] Linux version 5.10.0-11-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.92-1 (2022-01-18)

[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.0-11-amd64 root=/dev/mapper/debM11SSD-root ro quiet

[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256

[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[    0.000000] BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable

[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable

[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bac1afff] usable

[    0.000000] BIOS-e820: [mem 0x00000000bac1b000-0x00000000bac72fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000bac73000-0x00000000bada7fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000bada8000-0x00000000badb8fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000badb9000-0x00000000badcffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000badd0000-0x00000000badd1fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000badd2000-0x00000000badd9fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000badda000-0x00000000bade4fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000bade5000-0x00000000bae40fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000bae41000-0x00000000bae83fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000bae84000-0x00000000baffffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.6 present.

[    0.000000] DMI: System manufacturer System Product Name/P8Z68-V LX, BIOS 0703 10/21/2011

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] tsc: Detected 3310.715 MHz processor

[    0.000625] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000627] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000633] last_pfn = 0x43fe00 max_arch_pfn = 0x400000000

[    0.000637] MTRR default type: uncachable

[    0.000638] MTRR fixed ranges enabled:

[    0.000639]   00000-9FFFF write-back

[    0.000639]   A0000-BFFFF uncachable

[    0.000640]   C0000-CFFFF write-protect

[    0.000641]   D0000-E7FFF uncachable

[    0.000642]   E8000-FFFFF write-protect

[    0.000642] MTRR variable ranges enabled:

[    0.000644]   0 base 000000000 mask C00000000 write-back

[    0.000644]   1 base 400000000 mask FC0000000 write-back

[    0.000645]   2 base 0BB800000 mask FFF800000 uncachable

[    0.000646]   3 base 0BC000000 mask FFC000000 uncachable

[    0.000647]   4 base 0C0000000 mask FC0000000 uncachable

[    0.000648]   5 base 43FE00000 mask FFFE00000 uncachable

[    0.000648]   6 disabled

[    0.000649]   7 disabled

[    0.000649]   8 disabled

[    0.000650]   9 disabled

[    0.001405] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  

[    0.001598] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved

[    0.001604] last_pfn = 0xbb000 max_arch_pfn = 0x400000000

[    0.009381] found SMP MP-table at [mem 0x000fcda0-0x000fcdaf]

[    0.038159] reserving inaccessible SNB gfx pages

[    0.038462] RAMDISK: [mem 0x32893000-0x35440fff]

[    0.038465] ACPI: Early table checksum verification disabled

[    0.038468] ACPI: RSDP 0x00000000000F0420 000024 (v02 ALASKA)

[    0.038471] ACPI: XSDT 0x00000000BAC66068 00004C (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.038477] ACPI: FACP 0x00000000BAC6F818 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)

[    0.038481] ACPI: DSDT 0x00000000BAC66140 0096D6 (v02 ALASKA A M I    00000000 INTL 20051117)

[    0.038484] ACPI: FACS 0x00000000BADDCF80 000040

[    0.038486] ACPI: APIC 0x00000000BAC6F910 000072 (v03 ALASKA A M I    01072009 AMI  00010013)

[    0.038489] ACPI: SSDT 0x00000000BAC6F988 000102 (v01 AMICPU PROC     00000001 MSFT 03000001)

[    0.038492] ACPI: MCFG 0x00000000BAC6FA90 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)

[    0.038494] ACPI: HPET 0x00000000BAC6FAD0 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)

[    0.038497] ACPI: Reserving FACP table memory at [mem 0xbac6f818-0xbac6f90b]

[    0.038498] ACPI: Reserving DSDT table memory at [mem 0xbac66140-0xbac6f815]

[    0.038498] ACPI: Reserving FACS table memory at [mem 0xbaddcf80-0xbaddcfbf]

[    0.038499] ACPI: Reserving APIC table memory at [mem 0xbac6f910-0xbac6f981]

[    0.038500] ACPI: Reserving SSDT table memory at [mem 0xbac6f988-0xbac6fa89]

[    0.038500] ACPI: Reserving MCFG table memory at [mem 0xbac6fa90-0xbac6facb]

[    0.038501] ACPI: Reserving HPET table memory at [mem 0xbac6fad0-0xbac6fb07]

[    0.038510] ACPI: Local APIC address 0xfee00000

[    0.038552] No NUMA configuration found

[    0.038552] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]

[    0.038562] NODE_DATA(0) allocated [mem 0x43fdcd000-0x43fdf6fff]

[    0.038913] Zone ranges:

[    0.038914]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.038915]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.038916]   Normal   [mem 0x0000000100000000-0x000000043fdfffff]

[    0.038917]   Device   empty

[    0.038918] Movable zone start for each node

[    0.038921] Early memory node ranges

[    0.038922]   node   0: [mem 0x0000000000001000-0x000000000009cfff]

[    0.038923]   node   0: [mem 0x0000000000100000-0x000000001fffffff]

[    0.038923]   node   0: [mem 0x0000000020200000-0x000000003fffffff]

[    0.038924]   node   0: [mem 0x0000000040200000-0x00000000bac1afff]

[    0.038925]   node   0: [mem 0x00000000badd0000-0x00000000badd1fff]

[    0.038925]   node   0: [mem 0x00000000bae84000-0x00000000baffffff]

[    0.038926]   node   0: [mem 0x0000000100000000-0x000000043fdfffff]

[    0.038928] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff]

[    0.038930] On node 0 totalpages: 4171573

[    0.038931]   DMA zone: 64 pages used for memmap

[    0.038931]   DMA zone: 156 pages reserved

[    0.038932]   DMA zone: 3996 pages, LIFO batch:0

[    0.038933]   DMA32 zone: 11879 pages used for memmap

[    0.038934]   DMA32 zone: 760217 pages, LIFO batch:63

[    0.038935]   Normal zone: 53240 pages used for memmap

[    0.038935]   Normal zone: 3407360 pages, LIFO batch:63

[    0.038938] On node 0, zone DMA: 1 pages in unavailable ranges

[    0.038970] On node 0, zone DMA: 99 pages in unavailable ranges

[    0.041070] On node 0, zone DMA32: 512 pages in unavailable ranges

[    0.045185] On node 0, zone DMA32: 512 pages in unavailable ranges

[    0.045192] On node 0, zone DMA32: 437 pages in unavailable ranges

[    0.045198] On node 0, zone DMA32: 178 pages in unavailable ranges

[    0.045660] On node 0, zone Normal: 20480 pages in unavailable ranges

[    0.045666] On node 0, zone Normal: 512 pages in unavailable ranges

[    0.045680] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]

[    0.045757] ACPI: PM-Timer IO Port: 0x408

[    0.045758] ACPI: Local APIC address 0xfee00000

[    0.045764] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[    0.045775] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23

[    0.045777] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.045778] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.045779] ACPI: IRQ0 used by override.

[    0.045780] ACPI: IRQ9 used by override.

[    0.045782] Using ACPI (MADT) for SMP configuration information

[    0.045783] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[    0.045787] TSC deadline timer available

[    0.045788] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.045808] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.045809] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]

[    0.045810] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]

[    0.045810] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[    0.045811] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[    0.045813] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]

[    0.045814] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff]

[    0.045815] PM: hibernation: Registered nosave memory: [mem 0xbac1b000-0xbac72fff]

[    0.045816] PM: hibernation: Registered nosave memory: [mem 0xbac73000-0xbada7fff]

[    0.045817] PM: hibernation: Registered nosave memory: [mem 0xbada8000-0xbadb8fff]

[    0.045817] PM: hibernation: Registered nosave memory: [mem 0xbadb9000-0xbadcffff]

[    0.045819] PM: hibernation: Registered nosave memory: [mem 0xbadd2000-0xbadd9fff]

[    0.045819] PM: hibernation: Registered nosave memory: [mem 0xbadda000-0xbade4fff]

[    0.045820] PM: hibernation: Registered nosave memory: [mem 0xbade5000-0xbae40fff]

[    0.045820] PM: hibernation: Registered nosave memory: [mem 0xbae41000-0xbae83fff]

[    0.045822] PM: hibernation: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]

[    0.045822] PM: hibernation: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]

[    0.045823] PM: hibernation: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]

[    0.045823] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]

[    0.045824] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]

[    0.045825] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]

[    0.045826] [mem 0xbfa00000-0xfed1bfff] available for PCI devices

[    0.045827] Booting paravirtualized kernel on bare hardware

[    0.045830] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.049577] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1

[    0.049739] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u524288

[    0.049745] pcpu-alloc: s200536 r8192 d28840 u524288 alloc=1*2097152

[    0.049747] pcpu-alloc: [0] 0 1 2 3 

[    0.049775] Built 1 zonelists, mobility grouping on.  Total pages: 4106234

[    0.049776] Policy zone: Normal

[    0.049777] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-11-amd64 root=/dev/mapper/debM11SSD-root ro quiet

[    0.050628] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)

[    0.051050] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)

[    0.051095] mem auto-init: stack:off, heap alloc:on, heap free:off

[    0.066364] Memory: 3041908K/16686292K available (12295K kernel code, 2545K rwdata, 7568K rodata, 2412K init, 3680K bss, 434072K reserved, 0K cma-reserved)

[    0.066371] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0

[    0.066464] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.066474] Kernel/User page tables isolation: enabled

[    0.066487] ftrace: allocating 36444 entries in 143 pages

[    0.076753] ftrace: allocated 143 pages with 5 groups

[    0.076850] rcu: Hierarchical RCU implementation.

[    0.076851] rcu:   RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.

[    0.076852]  Rude variant of Tasks RCU enabled.

[    0.076853]  Tracing variant of Tasks RCU enabled.

[    0.076853] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.

[    0.076854] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[    0.080153] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16

[    0.081943] Console: colour VGA+ 80x25

[    0.081953] printk: console [tty0] enabled

[    0.081964] ACPI: Core revision 20200925

[    0.082030] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[    0.082043] APIC: Switch to symmetric I/O mode setup

[    0.082113] x2apic: IRQ remapping doesn't support X2APIC mode

[    0.082533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.102044] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fb8d64e25c, max_idle_ns: 440795309546 ns

[    0.102047] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.43 BogoMIPS (lpj=13242860)

[    0.102049] pid_max: default: 32768 minimum: 301

[    0.102068] LSM: Security Framework initializing

[    0.102075] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.102097] AppArmor: AppArmor initialized

[    0.102098] TOMOYO Linux initialized

[    0.102132] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[    0.102157] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[    0.102361] mce: CPU0: Thermal monitoring enabled (TM1)

[    0.102372] process: using mwait in idle threads

[    0.102374] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8

[    0.102375] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

[    0.102377] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[    0.102378] Spectre V2 : Mitigation: Full generic retpoline

[    0.102378] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[    0.102379] Speculative Store Bypass: Vulnerable

[    0.102381] MDS: Vulnerable: Clear CPU buffers attempted, no microcode

[    0.102460] Freeing SMP alternatives memory: 32K

[    0.106114] smpboot: CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)

[    0.106227] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.

[    0.106233] core: PEBS disabled due to CPU errata, please upgrade microcode

[    0.106234] ... version:                3

[    0.106235] ... bit width:              48

[    0.106235] ... generic registers:      8

[    0.106236] ... value mask:             0000ffffffffffff

[    0.106237] ... max period:             00007fffffffffff

[    0.106237] ... fixed-purpose events:   3

[    0.106238] ... event mask:             00000007000000ff

[    0.106345] rcu: Hierarchical SRCU implementation.

[    0.106791] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[    0.106836] smp: Bringing up secondary CPUs ...

[    0.106910] x86: Booting SMP configuration:

[    0.106912] .... node  #0, CPUs:      #1 #2 #3

[    0.112442] smp: Brought up 1 node, 4 CPUs

[    0.112442] smpboot: Max logical packages: 1

[    0.112442] smpboot: Total of 4 processors activated (26485.72 BogoMIPS)

[    0.137121] node 0 deferred pages initialised in 20ms

[    0.137125] devtmpfs: initialized

[    0.137125] x86/mm: Memory block size: 128MB

[    0.138637] PM: Registering ACPI NVS region [mem 0xbac1b000-0xbac72fff] (360448 bytes)

[    0.138637] PM: Registering ACPI NVS region [mem 0xbada8000-0xbadb8fff] (69632 bytes)

[    0.138637] PM: Registering ACPI NVS region [mem 0xbadda000-0xbade4fff] (45056 bytes)

[    0.138637] PM: Registering ACPI NVS region [mem 0xbae41000-0xbae83fff] (274432 bytes)

[    0.138637] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.138637] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)

[    0.138637] pinctrl core: initialized pinctrl subsystem

[    0.138637] NET: Registered protocol family 16

[    0.138637] audit: initializing netlink subsys (disabled)

[    0.138637] audit: type=2000 audit(1645185329.056:1): state=initialized audit_enabled=0 res=1

[    0.138637] thermal_sys: Registered thermal governor 'fair_share'

[    0.138637] thermal_sys: Registered thermal governor 'bang_bang'

[    0.138637] thermal_sys: Registered thermal governor 'step_wise'

[    0.138637] thermal_sys: Registered thermal governor 'user_space'

[    0.138637] thermal_sys: Registered thermal governor 'power_allocator'

[    0.138637] cpuidle: using governor ladder

[    0.138637] cpuidle: using governor menu

[    0.138637] ACPI: bus type PCI registered

[    0.138637] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.138637] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)

[    0.138637] PCI: not using MMCONFIG

[    0.138637] PCI: Using configuration type 1 for base access

[    0.138637] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off

[    0.138637] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[    0.138671] Kprobes globally optimized

[    0.138674] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[    0.282287] ACPI: Added _OSI(Module Device)

[    0.282287] ACPI: Added _OSI(Processor Device)

[    0.282287] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.282287] ACPI: Added _OSI(Processor Aggregator Device)

[    0.282287] ACPI: Added _OSI(Linux-Dell-Video)

[    0.282287] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

[    0.282287] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)

[    0.287750] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.288481] ACPI: Dynamic OEM Table Load:

[    0.288486] ACPI: SSDT 0xFFFF9BFC803B2000 0003E0 (v01 AMI    IST      00000001 MSFT 03000001)

[    0.288823] ACPI: Dynamic OEM Table Load:

[    0.288826] ACPI: SSDT 0xFFFF9BFC8092D200 000120 (v01 AMI    CST      00000001 MSFT 03000001)

[    0.289450] ACPI: EC: EC started

[    0.289451] ACPI: EC: interrupt blocked

[    0.289454] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.289456] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions

[    0.289457] ACPI: Interpreter enabled

[    0.289471] ACPI: (supports S0 S1 S3 S4 S5)

[    0.289472] ACPI: Using IOAPIC for interrupt routing

[    0.289494] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)

[    0.289536] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources

[    0.289540] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.

[    0.289608] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.289777] ACPI: Enabled 7 GPEs in block 00 to 3F

[    0.289955] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

[    0.294290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.294294] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]

[    0.294400] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]

[    0.294496] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]

[    0.294502] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge

[    0.294571] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cdfff])

[    0.294695] PCI host bridge to bus 0000:00

[    0.294697] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.294698] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.294699] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.294700] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]

[    0.294701] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.294711] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000

[    0.294780] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400

[    0.294809] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    0.294880] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000

[    0.294887] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]

[    0.294891] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]

[    0.294894] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]

[    0.294987] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000

[    0.295007] pci 0000:00:16.0: reg 0x10: [mem 0xfe508000-0xfe50800f 64bit]

[    0.295075] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

[    0.295148] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320

[    0.295163] pci 0000:00:1a.0: reg 0x10: [mem 0xfe507000-0xfe5073ff]

[    0.295241] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[    0.295317] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300

[    0.295333] pci 0000:00:1b.0: reg 0x10: [mem 0xfe500000-0xfe503fff 64bit]

[    0.295407] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.295480] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400

[    0.295566] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.295653] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400

[    0.295739] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[    0.295823] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400

[    0.295908] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold

[    0.295993] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400

[    0.296078] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[    0.296163] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400

[    0.296248] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

[    0.296331] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400

[    0.296416] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold

[    0.296499] pci 0000:00:1c.7: [8086:244e] type 01 class 0x060401

[    0.296585] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold

[    0.296670] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320

[    0.296685] pci 0000:00:1d.0: reg 0x10: [mem 0xfe506000-0xfe5063ff]

[    0.296765] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[    0.296844] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100

[    0.297006] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601

[    0.297018] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]

[    0.297025] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]

[    0.297032] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]

[    0.297039] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]

[    0.297046] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]

[    0.297053] pci 0000:00:1f.2: reg 0x24: [mem 0xfe505000-0xfe5057ff]

[    0.297090] pci 0000:00:1f.2: PME# supported from D3hot

[    0.297155] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500

[    0.297171] pci 0000:00:1f.3: reg 0x10: [mem 0xfe504000-0xfe5040ff 64bit]

[    0.297190] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]

[    0.297273] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.297311] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.297354] pci 0000:00:1c.2: PCI bridge to [bus 03]

[    0.297398] pci 0000:00:1c.3: PCI bridge to [bus 04]

[    0.297441] pci 0000:00:1c.4: PCI bridge to [bus 05]

[    0.297512] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330

[    0.297546] pci 0000:06:00.0: reg 0x10: [mem 0xfe400000-0xfe407fff 64bit]

[    0.297709] pci 0000:06:00.0: PME# supported from D3hot D3cold

[    0.297808] pci 0000:00:1c.5: PCI bridge to [bus 06]

[    0.297813] pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe4fffff]

[    0.297882] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000

[    0.297906] pci 0000:07:00.0: reg 0x10: [io  0xe000-0xe0ff]

[    0.297938] pci 0000:07:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]

[    0.297959] pci 0000:07:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]

[    0.298079] pci 0000:07:00.0: supports D1 D2

[    0.298080] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.298205] pci 0000:00:1c.6: PCI bridge to [bus 07]

[    0.298208] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]

[    0.298216] pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]

[    0.298279] pci 0000:08:00.0: [1b21:1080] type 01 class 0x060401

[    0.298442] pci 0000:00:1c.7: PCI bridge to [bus 08-09] (subtractive decode)

[    0.298452] pci 0000:00:1c.7:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)

[    0.298453] pci 0000:00:1c.7:   bridge window [io  0x0d00-0xffff window] (subtractive decode)

[    0.298454] pci 0000:00:1c.7:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)

[    0.298455] pci 0000:00:1c.7:   bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)

[    0.298487] pci_bus 0000:09: extended config space not accessible

[    0.298568] pci 0000:08:00.0: PCI bridge to [bus 09] (subtractive decode)

[    0.298589] pci 0000:08:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)

[    0.298590] pci 0000:08:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)

[    0.298591] pci 0000:08:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)

[    0.298592] pci 0000:08:00.0:   bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)

[    0.299075] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[    0.299117] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)

[    0.299157] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)

[    0.299197] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)

[    0.299237] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[    0.299277] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[    0.299317] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)

[    0.299357] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[    0.299438] ACPI: EC: interrupt unblocked

[    0.299439] ACPI: EC: event unblocked

[    0.299443] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.299444] ACPI: EC: GPE=0x18

[    0.299445] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete

[    0.299446] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events

[    0.299490] iommu: Default domain type: Translated 

[    0.299502] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[    0.299502] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[    0.299502] pci 0000:00:02.0: vgaarb: bridge control possible

[    0.299502] vgaarb: loaded

[    0.299502] EDAC MC: Ver: 3.0.0

[    0.299502] NetLabel: Initializing

[    0.299502] NetLabel:  domain hash size = 128

[    0.299502] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO

[    0.299502] NetLabel:  unlabeled traffic allowed by default

[    0.299502] PCI: Using ACPI for IRQ routing

[    0.299502] PCI: pci_cache_line_size set to 64 bytes

[    0.299546] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]

[    0.299547] e820: reserve RAM buffer [mem 0xbac1b000-0xbbffffff]

[    0.299548] e820: reserve RAM buffer [mem 0xbadd2000-0xbbffffff]

[    0.299550] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]

[    0.299550] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]

[    0.299568] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    0.299573] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[    0.303066] clocksource: Switched to clocksource tsc-early

[    0.310530] VFS: Disk quotas dquot_6.6.0

[    0.310544] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.310640] AppArmor: AppArmor Filesystem Enabled

[    0.310656] pnp: PnP ACPI init

[    0.310775] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved

[    0.310776] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved

[    0.310777] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved

[    0.310778] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.310780] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved

[    0.310785] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.310855] system 00:01: [io  0x0290-0x029f] has been reserved

[    0.310858] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.310963] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.310998] system 00:03: [io  0x04d0-0x04d1] has been reserved

[    0.311002] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.311172] pnp 00:04: [dma 0 disabled]

[    0.311205] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.311317] system 00:05: [io  0x0400-0x0453] has been reserved

[    0.311318] system 00:05: [io  0x0458-0x047f] has been reserved

[    0.311319] system 00:05: [io  0x0500-0x057f] has been reserved

[    0.311321] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved

[    0.311322] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved

[    0.311323] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved

[    0.311325] system 00:05: [mem 0xff000000-0xffffffff] has been reserved

[    0.311328] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.311372] system 00:06: [io  0x0454-0x0457] has been reserved

[    0.311376] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    0.311520] pnp: PnP ACPI: found 7 devices

[    0.317105] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.317153] NET: Registered protocol family 2

[    0.317308] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)

[    0.319403] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)

[    0.319491] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)

[    0.319696] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)

[    0.319777] TCP: Hash tables configured (established 131072 bind 65536)

[    0.319824] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)

[    0.319871] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)

[    0.319926] NET: Registered protocol family 1

[    0.319931] NET: Registered protocol family 44

[    0.319946] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.319951] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.319961] pci 0000:00:1c.2: PCI bridge to [bus 03]

[    0.319972] pci 0000:00:1c.3: PCI bridge to [bus 04]

[    0.319982] pci 0000:00:1c.4: PCI bridge to [bus 05]

[    0.319992] pci 0000:00:1c.5: PCI bridge to [bus 06]

[    0.319997] pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe4fffff]

[    0.320004] pci 0000:00:1c.6: PCI bridge to [bus 07]

[    0.320007] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]

[    0.320013] pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]

[    0.320019] pci 0000:08:00.0: PCI bridge to [bus 09]

[    0.320038] pci 0000:00:1c.7: PCI bridge to [bus 08-09]

[    0.320049] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    0.320050] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    0.320051] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.320052] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff window]

[    0.320053] pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]

[    0.320054] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]

[    0.320055] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]

[    0.320056] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7 window]

[    0.320057] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff window]

[    0.320058] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.320059] pci_bus 0000:08: resource 7 [mem 0xbfa00000-0xffffffff window]

[    0.320060] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7 window]

[    0.320061] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff window]

[    0.320062] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.320063] pci_bus 0000:09: resource 7 [mem 0xbfa00000-0xffffffff window]

[    0.320133] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling

[    0.320144] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.450157] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x700 took 126956 usecs

[    0.582136] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x700 took 128856 usecs

[    0.582271] pci 0000:08:00.0: Disabling ASPM L0s/L1

[    0.582276] PCI: CLS 64 bytes, default 64

[    0.582317] Trying to unpack rootfs image as initramfs...

[    1.152732] Freeing initrd memory: 44728K

[    1.152744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    1.152746] software IO TLB: mapped [mem 0x00000000b6c1b000-0x00000000bac1b000] (64MB)

[    1.153118] Initialise system trusted keyrings

[    1.153126] Key type blacklist registered

[    1.153169] workingset: timestamp_bits=36 max_order=22 bucket_order=0

[    1.154077] zbud: loaded

[    1.154208] integrity: Platform Keyring initialized

[    1.154209] Key type asymmetric registered

[    1.154211] Asymmetric key parser 'x509' registered

[    1.154217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[    1.154242] io scheduler mq-deadline registered

[    1.154429] pcieport 0000:00:01.0: PME: Signaling with IRQ 24

[    1.154556] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25

[    1.154690] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26

[    1.154819] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27

[    1.154946] pcieport 0000:00:1c.4: PME: Signaling with IRQ 28

[    1.155038] pcieport 0000:00:1c.5: PME: Signaling with IRQ 29

[    1.155163] pcieport 0000:00:1c.6: PME: Signaling with IRQ 30

[    1.155291] pcieport 0000:00:1c.7: PME: Signaling with IRQ 31

[    1.155361] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[    1.155373] intel_idle: MWAIT substates: 0x1120

[    1.155374] intel_idle: v0.5.1 model 0x2A

[    1.155497] intel_idle: Local APIC timer is reliable in all C-states

[    1.156059] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    1.156200] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    1.156790] Linux agpgart interface v0.103

[    1.156818] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.

[    1.157041] i8042: PNP: No PS/2 controller found.

[    1.157117] mousedev: PS/2 mouse device common for all mice

[    1.157142] rtc_cmos 00:02: RTC can wake from S4

[    1.157311] rtc_cmos 00:02: registered as rtc0

[    1.157371] rtc_cmos 00:02: setting system clock to 2022-02-18T11:55:30 UTC (1645185330)

[    1.157384] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[    1.157391] intel_pstate: Intel P-state driver initializing

[    1.157704] ledtrig-cpu: registered to indicate activity on CPUs

[    1.158051] NET: Registered protocol family 10

[    1.164013] Segment Routing with IPv6

[    1.164032] mip6: Mobile IPv6

[    1.164035] NET: Registered protocol family 17

[    1.164091] mpls_gso: MPLS GSO support

[    1.164411] microcode: sig=0x206a7, pf=0x2, revision=0x1a

[    1.164431] microcode: Microcode Update Driver: v2.2.

[    1.164435] IPI shorthand broadcast: enabled

[    1.164441] sched_clock: Marking stable (1162649136, 1696471)->(1229614352, -65268745)

[    1.164604] registered taskstats version 1

[    1.164605] Loading compiled-in X.509 certificates

[    1.195205] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'

[    1.195219] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'

[    1.195239] zswap: loaded using pool lzo/zbud

[    1.195637] Key type ._fscrypt registered

[    1.195638] Key type .fscrypt registered

[    1.195639] Key type fscrypt-provisioning registered

[    1.195667] AppArmor: AppArmor sha1 policy hashing enabled

[    1.196854] Freeing unused kernel image (initmem) memory: 2412K

[    1.218109] Write protecting the kernel read-only data: 22528k

[    1.218654] Freeing unused kernel image (text/rodata gap) memory: 2040K

[    1.218810] Freeing unused kernel image (rodata/data gap) memory: 624K

[    1.260920] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    1.260921] x86/mm: Checking user space page tables

[    1.300166] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    1.300170] Run /init as init process

[    1.300171]   with arguments:

[    1.300172]     /init

[    1.300173]   with environment:

[    1.300173]     HOME=/

[    1.300174]     TERM=linux

[    1.300174]     BOOT_IMAGE=/vmlinuz-5.10.0-11-amd64

[    1.392270] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[    1.411105] ACPI: bus type USB registered

[    1.411128] usbcore: registered new interface driver usbfs

[    1.411134] usbcore: registered new interface driver hub

[    1.411143] usbcore: registered new device driver usb

[    1.420528] ACPI: Power Button [PWRB]

[    1.420582] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[    1.420672] ACPI: Power Button [PWRF]

[    1.421626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.422207] ehci-pci: EHCI PCI platform driver

[    1.422323] ehci-pci 0000:00:1a.0: EHCI Host Controller

[    1.422329] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

[    1.422340] ehci-pci 0000:00:1a.0: debug port 2

[    1.426242] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported

[    1.426472] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20200925/utaddress-204)

[    1.426477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    1.426477] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20200925/utaddress-204)

[    1.426480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    1.426480] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20200925/utaddress-204)

[    1.426483] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20200925/utaddress-204)

[    1.426485] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    1.426486] lpc_ich: Resource conflict(s) found affecting gpio_ich

[    1.431355] SCSI subsystem initialized

[    1.431427] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[    1.431464] i2c i2c-0: 4/4 memory slots populated (from DMI)

[    1.431499] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfe507000

[    1.432060] i2c i2c-0: Successfully instantiated SPD at 0x50

[    1.432524] i2c i2c-0: Successfully instantiated SPD at 0x51

[    1.432860] i2c i2c-0: Successfully instantiated SPD at 0x52

[    1.433160] i2c i2c-0: Successfully instantiated SPD at 0x53

[    1.433866] cryptd: max_cpu_qlen set to 1000

[    1.445088] AVX version of gcm_enc/dec engaged.

[    1.445090] AES CTR mode by8 optimization enabled

[    1.445123] libata version 3.00 loaded.

[    1.446466] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[    1.446526] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    1.446528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.446529] usb usb1: Product: EHCI Host Controller

[    1.446530] usb usb1: Manufacturer: Linux 5.10.0-11-amd64 ehci_hcd

[    1.446530] usb usb1: SerialNumber: 0000:00:1a.0

[    1.448729] ahci 0000:00:1f.2: version 3.0

[    1.449179] hub 1-0:1.0: USB hub found

[    1.449186] hub 1-0:1.0: 2 ports detected

[    1.449375] xhci_hcd 0000:06:00.0: xHCI Host Controller

[    1.449380] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 2

[    1.452006] libphy: r8169: probed

[    1.452310] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl, c8:60:00:6a:b5:f2, XID 2c9, IRQ 33

[    1.452312] r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]

[    1.453605] r8169 0000:07:00.0 enp7s0: renamed from eth0

[    1.458958] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode

[    1.458963] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 

[    1.470744] scsi host0: ahci

[    1.471818] scsi host1: ahci

[    1.472885] scsi host2: ahci

[    1.474087] scsi host3: ahci

[    1.476238] scsi host4: ahci

[    1.476793] scsi host5: ahci

[    1.476835] ata1: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505100 irq 32

[    1.476836] ata2: DUMMY

[    1.476836] ata3: DUMMY

[    1.476837] ata4: DUMMY

[    1.476838] ata5: DUMMY

[    1.476840] ata6: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505380 irq 32

[    1.510511] xhci_hcd 0000:06:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000

[    1.510748] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    1.510749] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.510750] usb usb2: Product: xHCI Host Controller

[    1.510751] usb usb2: Manufacturer: Linux 5.10.0-11-amd64 xhci-hcd

[    1.510752] usb usb2: SerialNumber: 0000:06:00.0

[    1.510926] hub 2-0:1.0: USB hub found

[    1.510938] hub 2-0:1.0: 2 ports detected

[    1.511065] ehci-pci 0000:00:1d.0: EHCI Host Controller

[    1.511070] xhci_hcd 0000:06:00.0: xHCI Host Controller

[    1.511072] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3

[    1.511073] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4

[    1.511076] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed

[    1.511089] ehci-pci 0000:00:1d.0: debug port 2

[    1.511100] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.

[    1.511118] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10

[    1.511119] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.511120] usb usb4: Product: xHCI Host Controller

[    1.511121] usb usb4: Manufacturer: Linux 5.10.0-11-amd64 xhci-hcd

[    1.511121] usb usb4: SerialNumber: 0000:06:00.0

[    1.511284] hub 4-0:1.0: USB hub found

[    1.511296] hub 4-0:1.0: 2 ports detected

[    1.514991] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported

[    1.514996] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe506000

[    1.530108] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[    1.530202] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    1.530204] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.530205] usb usb3: Product: EHCI Host Controller

[    1.530206] usb usb3: Manufacturer: Linux 5.10.0-11-amd64 ehci_hcd

[    1.530206] usb usb3: SerialNumber: 0000:00:1d.0

[    1.530393] hub 3-0:1.0: USB hub found

[    1.530399] hub 3-0:1.0: 2 ports detected

[    1.562639] i915 0000:00:02.0: vgaarb: deactivate vga console

[    1.563023] Console: switching to colour dummy device 80x25

[    1.564005] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    1.582546] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0

[    1.582974] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[    1.583181] acpi device:32: registered as cooling_device4

[    1.583224] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2

[    1.686735] fbcon: i915drmfb (fb0) is primary device

[    1.746101] usb 1-1: new high-speed USB device number 2 using ehci-pci

[    1.786064] usb 3-1: new high-speed USB device number 2 using ehci-pci

[    1.786684] Console: switching to colour frame buffer device 240x67

[    1.792830] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    1.792854] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    1.793262] ata1.00: supports DRM functions and may not be fully accessible

[    1.793913] ata1.00: disabling queued TRIM support

[    1.793915] ata1.00: ATA-11: Samsung SSD 870 EVO 1TB, SVT01B6Q, max UDMA/133

[    1.793917] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA

[    1.795381] ata6.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133

[    1.795383] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA

[    1.796045] ata1.00: supports DRM functions and may not be fully accessible

[    1.796521] ata1.00: disabling queued TRIM support

[    1.797179] ata6.00: configured for UDMA/133

[    1.798242] ata1.00: configured for UDMA/133

[    1.798403] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 870  1B6Q PQ: 0 ANSI: 5

[    1.798728] scsi 5:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5

[    1.811319] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[    1.832769] ata1.00: Enabling discard_zeroes_data

[    1.832796] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[    1.832802] sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)

[    1.832805] sd 5:0:0:0: [sda] Write Protect is off

[    1.832806] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.832808] sd 0:0:0:0: [sdb] Write Protect is off

[    1.832810] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[    1.832816] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.832820] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.842686] random: fast init done

[    1.858136] ata1.00: Enabling discard_zeroes_data

[    1.859360]  sdb: sdb1 sdb2 < sdb5 >

[    1.873489]  sda: sda1

[    1.874074] ata1.00: Enabling discard_zeroes_data

[    1.875059] sd 0:0:0:0: [sdb] supports TCG Opal

[    1.875060] sd 0:0:0:0: [sdb] Attached SCSI disk

[    1.890116] sd 5:0:0:0: [sda] Attached SCSI disk

[    1.902425] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

[    1.902428] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.902652] hub 1-1:1.0: USB hub found

[    1.902797] hub 1-1:1.0: 6 ports detected

[    1.938069] tsc: Refined TSC clocksource calibration: 3310.799 MHz

[    1.938077] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fb925d0d95, max_idle_ns: 440795276089 ns

[    1.938099] clocksource: Switched to clocksource tsc

[    1.942432] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

[    1.942437] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.942765] hub 3-1:1.0: USB hub found

[    1.942922] hub 3-1:1.0: 8 ports detected

[    2.011337] random: lvm: uninitialized urandom read (4 bytes read)

[    2.060187] random: lvm: uninitialized urandom read (4 bytes read)

[    2.126575] device-mapper: uevent: version 1.0.3

[    2.126752] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com

[    2.156110] random: cryptsetup: uninitialized urandom read (4 bytes read)

[    2.230102] usb 3-1.6: new low-speed USB device number 3 using ehci-pci

[    2.357874] usb 3-1.6: New USB device found, idVendor=05af, idProduct=8277, bcdDevice= 1.01

[    2.357878] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.357880] usb 3-1.6: Product: USB Keyboard

[    2.357881] usb 3-1.6: Manufacturer:  

[    2.370760] hid: raw HID events driver (C) Jiri Kosina

[    2.392720] usbcore: registered new interface driver usbhid

[    2.392722] usbhid: USB HID core driver

[    2.395298] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:05AF:8277.0001/input/input3

[    2.438102] usb 3-1.7: new full-speed USB device number 4 using ehci-pci

[    2.454372] hid-generic 0003:05AF:8277.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-1.6/input0

[    2.454987] input:   USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:05AF:8277.0002/input/input4

[    2.514185] input:   USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:05AF:8277.0002/input/input5

[    2.514322] hid-generic 0003:05AF:8277.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-1.6/input1

[    2.550355] usb 3-1.7: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.09

[    2.550359] usb 3-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.550361] usb 3-1.7: Product: USB Receiver

[    2.550363] usb 3-1.7: Manufacturer: Logitech

[    2.552801] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/0003:046D:C52B.0003/input/input6

[    2.610377] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input0

[    2.613091] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.1/0003:046D:C52B.0004/input/input7

[    2.613298] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.1/0003:046D:C52B.0004/input/input8

[    2.670160] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.1/0003:046D:C52B.0004/input/input9

[    2.670443] hid-generic 0003:046D:C52B.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input1

[    2.672583] hid-generic 0003:046D:C52B.0005: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2

[    2.803370] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2

[    2.924159] input: Logitech Wireless Device PID:406d Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.2/0003:046D:C52B.0005/0003:046D:406D.0006/input/input11

[    2.924342] hid-generic 0003:046D:406D.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Device PID:406d] on usb-0000:00:1d.0-1.7/input2:1

[    2.975987] input: Logitech M705 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.2/0003:046D:C52B.0005/0003:046D:406D.0006/input/input15

[    2.976258] logitech-hidpp-device 0003:046D:406D.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:1d.0-1.7/input2:1

[   12.586355] random: cryptsetup: uninitialized urandom read (2 bytes read)

[   12.596193] random: lvm: uninitialized urandom read (4 bytes read)

[   12.606184] random: crng init done

[   12.819855] PM: Image not found (code -22)

[   12.912090] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)

[   12.954362] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[   13.039048] systemd[1]: Inserted module 'autofs4'

[   13.057817] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)

[   13.074199] systemd[1]: Detected architecture x86-64.

[   13.074884] systemd[1]: Set hostname to <debM>.

[   13.211728] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.

[   13.237391] systemd[1]: Queued start job for default target Graphical Interface.

[   13.238317] systemd[1]: Created slice system-getty.slice.

[   13.238519] systemd[1]: Created slice system-modprobe.slice.

[   13.238740] systemd[1]: Created slice Cryptsetup Units Slice.

[   13.238911] systemd[1]: Created slice system-systemd\x2dfsck.slice.

[   13.239064] systemd[1]: Created slice User and Session Slice.

[   13.239140] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[   13.239283] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[   13.239347] systemd[1]: Reached target User and Group Name Lookups.

[   13.239361] systemd[1]: Reached target Remote File Systems.

[   13.239371] systemd[1]: Reached target Slices.

[   13.239449] systemd[1]: Listening on Device-mapper event daemon FIFOs.

[   13.239530] systemd[1]: Listening on LVM2 poll daemon socket.

[   13.239606] systemd[1]: Listening on Syslog Socket.

[   13.239680] systemd[1]: Listening on fsck to fsckd communication Socket.

[   13.239725] systemd[1]: Listening on initctl Compatibility Named Pipe.

[   13.239856] systemd[1]: Listening on Journal Audit Socket.

[   13.239932] systemd[1]: Listening on Journal Socket (/dev/log).

[   13.240027] systemd[1]: Listening on Journal Socket.

[   13.240132] systemd[1]: Listening on udev Control Socket.

[   13.240207] systemd[1]: Listening on udev Kernel Socket.

[   13.240788] systemd[1]: Mounting Huge Pages File System...

[   13.241344] systemd[1]: Mounting POSIX Message Queue File System...

[   13.241948] systemd[1]: Mounting Kernel Debug File System...

[   13.242576] systemd[1]: Mounting Kernel Trace File System...

[   13.242743] systemd[1]: Finished Availability of block devices.

[   13.243462] systemd[1]: Starting Set the console keyboard layout...

[   13.244054] systemd[1]: Starting Create list of static device nodes for the current kernel...

[   13.244709] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...

[   13.245337] systemd[1]: Starting Load Kernel Module configfs...

[   13.245932] systemd[1]: Starting Load Kernel Module drm...

[   13.246550] systemd[1]: Starting Load Kernel Module fuse...

[   13.246994] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.

[   13.247045] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.

[   13.248260] systemd[1]: Starting Journal Service...

[   13.250486] systemd[1]: Starting Load Kernel Modules...

[   13.251117] systemd[1]: Starting Remount Root and Kernel File Systems...

[   13.251708] systemd[1]: Starting Coldplug All udev Devices...

[   13.253019] systemd[1]: Mounted Huge Pages File System.

[   13.253132] systemd[1]: Mounted POSIX Message Queue File System.

[   13.253405] systemd[1]: Mounted Kernel Debug File System.

[   13.253531] systemd[1]: Mounted Kernel Trace File System.

[   13.253823] systemd[1]: Finished Set the console keyboard layout.

[   13.254105] systemd[1]: Finished Create list of static device nodes for the current kernel.

[   13.254394] systemd[1]: modprobe@configfs.service: Succeeded.

[   13.254545] systemd[1]: Finished Load Kernel Module configfs.

[   13.254736] systemd[1]: modprobe@drm.service: Succeeded.

[   13.254885] systemd[1]: Finished Load Kernel Module drm.

[   13.255577] systemd[1]: Mounting Kernel Configuration File System...

[   13.257584] systemd[1]: Mounted Kernel Configuration File System.

[   13.260248] fuse: init (API version 7.32)

[   13.260862] systemd[1]: modprobe@fuse.service: Succeeded.

[   13.261042] systemd[1]: Finished Load Kernel Module fuse.

[   13.261879] systemd[1]: Mounting FUSE Control File System...

[   13.264247] systemd[1]: Mounted FUSE Control File System.

[   13.264581] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro

[   13.265228] systemd[1]: Finished Remount Root and Kernel File Systems.

[   13.266486] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.

[   13.266525] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.

[   13.267108] systemd[1]: Starting Load/Save Random Seed...

[   13.267698] systemd[1]: Starting Create System Users...

[   13.275734] lp: driver loaded but no devices found

[   13.277669] systemd[1]: Finished Load/Save Random Seed.

[   13.277809] systemd[1]: Condition check resulted in First Boot Complete being skipped.

[   13.279601] ppdev: user-space parallel port driver

[   13.290466] IPMI message handler: version 39.2

[   13.292573] systemd[1]: Finished Create System Users.

[   13.293251] systemd[1]: Starting Create Static Device Nodes in /dev...

[   13.293498] ipmi device interface

[   13.315484] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.

[   13.321378] systemd[1]: Started Journal Service.

[   13.335716] systemd-journald[422]: Received client request to flush runtime journal.

[   13.339586] nvidia: loading out-of-tree module taints kernel.

[   13.339593] nvidia: module license 'NVIDIA' taints kernel.

[   13.339594] Disabling lock debugging due to kernel taint

[   13.345257] nvidia: module verification failed: signature and/or required key missing - tainting kernel

[   13.361780] nvidia-nvlink: Nvlink Core is being initialized, major device number 246

[   13.361996] NVRM: No NVIDIA graphics adapter found!

[   13.362063] nvidia-nvlink: Unregistered the Nvlink Core, major device number 246

[   13.440878] nvidia-nvlink: Nvlink Core is being initialized, major device number 246

[   13.441098] NVRM: No NVIDIA graphics adapter found!

[   13.441163] nvidia-nvlink: Unregistered the Nvlink Core, major device number 246

[   13.505417] iTCO_vendor_support: vendor-support=0

[   13.508423] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[   13.508466] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)

[   13.517210] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   13.517870] sd 5:0:0:0: Attached scsi generic sg1 type 0

[   13.517909] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[   13.571030] at24 0-0050: supply vcc not found, using dummy regulator

[   13.571038] input: PC Speaker as /devices/platform/pcspkr/input/input16

[   13.571596] at24 0-0050: 256 byte spd EEPROM, read-only

[   13.571610] at24 0-0051: supply vcc not found, using dummy regulator

[   13.572370] at24 0-0051: 256 byte spd EEPROM, read-only

[   13.572389] at24 0-0052: supply vcc not found, using dummy regulator

[   13.573020] nvidia-nvlink: Nvlink Core is being initialized, major device number 244

[   13.573240] NVRM: No NVIDIA graphics adapter found!

[   13.573304] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244

[   13.573333] at24 0-0052: 256 byte spd EEPROM, read-only

[   13.573353] at24 0-0053: supply vcc not found, using dummy regulator

[   13.573903] at24 0-0053: 256 byte spd EEPROM, read-only

[   13.584978] asus_wmi: ASUS WMI generic driver loaded

[   13.585946] asus_wmi: Initialization: 0x0

[   13.585967] asus_wmi: BIOS WMI version: 0.9

[   13.585997] asus_wmi: SFUN value: 0x0

[   13.586000] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS

[   13.586148] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer

[   13.586149] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

[   13.586150] RAPL PMU: hw unit of domain package 2^-16 Joules

[   13.586150] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules

[   13.586301] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input17

[   13.686086] Adding 999420k swap on /dev/mapper/debM11SSD-swap_1.  Priority:-2 extents:1 across:999420k SSFS

[   13.692363] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem

[   13.693950] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)

[   13.693956] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)

[   13.774824] audit: type=1400 audit(1645185343.112:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=606 comm="apparmor_parser"

[   13.780567] audit: type=1400 audit(1645185343.116:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=607 comm="apparmor_parser"

[   13.786165] audit: type=1400 audit(1645185343.124:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=609 comm="apparmor_parser"

[   13.786168] audit: type=1400 audit(1645185343.124:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=609 comm="apparmor_parser"

[   13.786169] audit: type=1400 audit(1645185343.124:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=609 comm="apparmor_parser"

[   13.788871] audit: type=1400 audit(1645185343.124:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=604 comm="apparmor_parser"

[   13.788875] audit: type=1400 audit(1645185343.124:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=604 comm="apparmor_parser"

[   13.789782] audit: type=1400 audit(1645185343.124:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=605 comm="apparmor_parser"

[   13.789785] audit: type=1400 audit(1645185343.124:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=605 comm="apparmor_parser"

[   13.789787] audit: type=1400 audit(1645185343.124:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=605 comm="apparmor_parser"

[   13.796241] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[   13.903561] intel_rapl_common: Found RAPL domain package

[   13.903563] intel_rapl_common: Found RAPL domain core

[   13.903564] intel_rapl_common: Found RAPL domain uncore

[   13.903568] intel_rapl_common: RAPL package-0 domain package locked by BIOS

[   13.910117] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line

[   13.910119] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[   13.910121] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

[   13.910121] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[   13.910122] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e

[   13.910123] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[   13.910124] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19

[   13.910125] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18

[   13.910126] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a

[   13.948927] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18

[   13.948971] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19

[   13.949006] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20

[   13.949043] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21

[   13.949075] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22

[   13.949109] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23

[   13.949141] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24

[   13.949178] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25

[   13.949213] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26

[   14.038426] nvidia-nvlink: Nvlink Core is being initialized, major device number 244

[   14.038621] NVRM: No NVIDIA graphics adapter found!

[   14.038683] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244

[   14.122612] nvidia-nvlink: Nvlink Core is being initialized, major device number 244

[   14.122813] NVRM: No NVIDIA graphics adapter found!

[   14.122880] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244

[   14.183982] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)

[   14.196159] nvidia-nvlink: Nvlink Core is being initialized, major device number 244

[   14.196352] NVRM: No NVIDIA graphics adapter found!

[   14.196414] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244

[   14.512113] r8169 0000:07:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw

[   14.512627] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE)

[   14.612545] vboxdrv: Found 4 processor cores

[   14.630329] vboxdrv: TSC mode is Invariant, tentative frequency 3310797466 Hz

[   14.630331] vboxdrv: Successfully loaded version 6.1.28 r147628 (interface 0x00320000)

[   14.806493] r8169 0000:07:00.0 enp7s0: Link is Down

[   14.842030] VBoxNetFlt: Successfully started.

[   14.845499] VBoxNetAdp: Successfully started.

[   16.363606] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control off

[   16.363616] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready

[  518.014514] logitech-hidpp-device 0003:046D:406D.0006: HID++ 4.5 device connected.

[  983.238194] kauditd_printk_skb: 10 callbacks suppressed

[  983.238196] audit: type=1400 audit(1645186313.289:22): apparmor="ALLOWED" operation="mknod" profile="libreoffice-soffice" name="/home/alex/Page_web/internet_4/Alimentation_courses_produits/prix/magasins_bio/lu2392sde2yq.tmp" pid=2392 comm="soffice.bin" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000

[  983.238202] audit: type=1400 audit(1645186313.289:23): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/Page_web/internet_4/Alimentation_courses_produits/prix/magasins_bio/lu2392sde2yq.tmp" pid=2392 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[  983.238361] audit: type=1400 audit(1645186313.289:24): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/Page_web/internet_4/Alimentation_courses_produits/prix/magasins_bio/lu2392sde2yq.tmp" pid=2392 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[  983.250330] audit: type=1400 audit(1645186313.301:25): apparmor="ALLOWED" operation="rename_src" profile="libreoffice-soffice" name="/home/alex/Page_web/internet_4/Alimentation_courses_produits/prix/magasins_bio/lu2392sde2yq.tmp" pid=2392 comm="soffice.bin" requested_mask="wrd" denied_mask="wrd" fsuid=1000 ouid=1000

[ 2747.821681] audit: type=1400 audit(1645188077.819:26): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/profiles.ini" pid=3180 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000

[ 2747.829936] audit: type=1400 audit(1645188077.827:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/cert9.db" pid=3180 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[ 2747.830011] audit: type=1400 audit(1645188077.827:28): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/cert9.db" pid=3180 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000

[ 2747.830610] audit: type=1400 audit(1645188077.831:29): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/key4.db" pid=3180 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[ 2747.830670] audit: type=1400 audit(1645188077.831:30): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/key4.db" pid=3180 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000

[ 2910.160231] audit: type=1400 audit(1645188240.154:31): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/profiles.ini" pid=3799 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000

[ 2910.163238] audit: type=1400 audit(1645188240.158:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/cert9.db" pid=3799 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[ 2910.163243] audit: type=1400 audit(1645188240.158:33): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/cert9.db" pid=3799 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000

[ 2910.163758] audit: type=1400 audit(1645188240.158:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/key4.db" pid=3799 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[ 2910.163832] audit: type=1400 audit(1645188240.158:35): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/key4.db" pid=3799 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000

[ 2923.576146] audit: type=1400 audit(1645188253.570:36): apparmor="ALLOWED" operation="mknod" profile="libreoffice-soffice" name="/home/alex/Doc_2/CV/Motivation/lu3799selmb7.tmp" pid=3799 comm="soffice.bin" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000

[ 2923.576155] audit: type=1400 audit(1645188253.570:37): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/Doc_2/CV/Motivation/lu3799selmb7.tmp" pid=3799 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[ 2923.576361] audit: type=1400 audit(1645188253.570:38): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/Doc_2/CV/Motivation/lu3799selmb7.tmp" pid=3799 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000

[ 2923.576369] audit: type=1400 audit(1645188253.570:39): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/alex/Doc_2/CV/Motivation/lu3799selmb7.tmp" pid=3799 comm="soffice.bin" requested_mask="wk" denied_mask="wk" fsuid=1000 ouid=1000

[ 2923.694696] audit: type=1400 audit(1645188253.686:40): apparmor="ALLOWED" operation="rename_src" profile="libreoffice-soffice" name="/home/alex/Doc_2/CV/Motivation/lu3799selmb7.tmp" pid=3799 comm="soffice.bin" requested_mask="wrd" denied_mask="wrd" fsuid=1000 ouid=1000

[ 2962.734427] audit: type=1400 audit(1645188292.725:41): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/profiles.ini" pid=3901 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000

[ 2962.737482] audit: type=1400 audit(1645188292.729:42): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/cert9.db" pid=3901 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[ 2962.737558] audit: type=1400 audit(1645188292.729:43): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/cert9.db" pid=3901 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000

[ 2962.738118] audit: type=1400 audit(1645188292.729:44): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/key4.db" pid=3901 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000

[ 2962.738181] audit: type=1400 audit(1645188292.729:45): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/alex/.thunderbird/j3dnac2r.default-default/key4.db" pid=3901 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000

[ 3101.012079] SUPR0GipMap: fGetGipCpu=0x1b

[ 3101.987345] vboxdrv: 00000000099f95d9 VMMR0.r0

[ 3102.132744] vboxdrv: 0000000025fc9a0d VBoxDDR0.r0

[ 3102.252975] vboxdrv: 00000000eda0f82f VBoxEhciR0.r0

[ 3102.254129] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)

[10183.048349] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750

[11095.230630] r8169 0000:07:00.0 enp7s0: Link is Down

[11095.494180] PM: hibernation: hibernation entry

[11095.502681] Filesystems sync: 0.008 seconds

[11095.502685] Freezing user space processes ... (elapsed 0.001 seconds) done.

[11095.504239] OOM killer disabled.

[11095.504373] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]

[11095.504374] PM: hibernation: Marking nosave pages: [mem 0x0009d000-0x000fffff]

[11095.504376] PM: hibernation: Marking nosave pages: [mem 0x20000000-0x201fffff]

[11095.504383] PM: hibernation: Marking nosave pages: [mem 0x40000000-0x401fffff]

[11095.504389] PM: hibernation: Marking nosave pages: [mem 0xbac1b000-0xbadcffff]

[11095.504394] PM: hibernation: Marking nosave pages: [mem 0xbadd2000-0xbae83fff]

[11095.504397] PM: hibernation: Marking nosave pages: [mem 0xbb000000-0xffffffff]

[11095.505056] PM: hibernation: Basic memory bitmaps created

[11095.505147] PM: hibernation: Preallocating image memory

[11097.067856] PM: hibernation: Allocated 1354833 pages for snapshot

[11097.067859] PM: hibernation: Allocated 5419332 kbytes in 1.56 seconds (3473.93 MB/s)

[11097.067860] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.

[11097.069867] printk: Suspending console(s) (use no_console_suspend to debug)

[11097.070494] serial 00:04: disabled

[11097.134083] ACPI: EC: interrupt blocked

[11097.134840] ACPI: Preparing to enter system sleep state S4

[11097.135572] ACPI: EC: event blocked

[11097.135572] ACPI: EC: EC stopped

[11097.135573] PM: Saving platform NVS memory

[11097.135866] Disabling non-boot CPUs ...

[11097.137101] smpboot: CPU 1 is now offline

[11097.138904] smpboot: CPU 2 is now offline

[11097.140687] smpboot: CPU 3 is now offline

[11097.141301] PM: hibernation: Creating image:

[11097.338409] PM: hibernation: Need to copy 1352534 pages

[11097.338411] PM: hibernation: Normal pages needed: 1352534 + 1024, available pages: 2818749

[11098.480492] PM: hibernation: Image created (1352534 pages copied)

[11097.141908] PM: Restoring platform NVS memory

[11097.142015] ACPI: EC: EC started

[11097.142318] Enabling non-boot CPUs ...

[11097.142354] x86: Booting SMP configuration:

[11097.142355] smpboot: Booting Node 0 Processor 1 APIC 0x2

[11097.144927] CPU1 is up

[11097.144993] smpboot: Booting Node 0 Processor 2 APIC 0x4

[11097.147548] CPU2 is up

[11097.147569] smpboot: Booting Node 0 Processor 3 APIC 0x6

[11097.150200] CPU3 is up

[11097.152420] ACPI: Waking up from system sleep state S4

[11097.152919] ACPI: EC: interrupt unblocked

[11097.175206] ACPI: EC: event unblocked

[11097.176204] serial 00:04: activated

[11097.509545] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[11097.509572] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[11097.513512] ata1.00: supports DRM functions and may not be fully accessible

[11097.513666] ata6.00: configured for UDMA/133

[11097.513975] ata1.00: disabling queued TRIM support

[11097.515925] ata1.00: supports DRM functions and may not be fully accessible

[11097.516322] ata1.00: disabling queued TRIM support

[11097.517789] ata1.00: configured for UDMA/133

[11097.517919] ata1.00: Enabling discard_zeroes_data

[11097.518575] PM: Using 3 thread(s) for compression

[11097.518578] PM: Compressing and saving image data (1355176 pages)...

[11097.518611] PM: Image saving progress:   0%

[11098.180692] PM: Image saving progress:  10%

[11098.918676] PM: Image saving progress:  20%

[11099.626599] PM: Image saving progress:  30%

[11100.359413] PM: Image saving progress:  40%

[11100.702973] PM: hibernation: Wrote 5420704 kbytes in 3.18 seconds (1704.62 MB/s)

[11100.876935] PM: hibernation: Basic memory bitmaps freed

[11100.876938] OOM killer enabled.

[11100.876939] Restarting tasks ... done.

[11100.879442] PM: hibernation: hibernation exit

[11100.903100] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE)

[11101.157165] r8169 0000:07:00.0 enp7s0: Link is Down

[11102.762839] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control off

[11102.762855] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready

[11119.376001] r8169 0000:07:00.0 enp7s0: Link is Down

[11119.598138] PM: suspend entry (deep)

[11119.619850] Filesystems sync: 0.021 seconds

[11119.620251] Freezing user space processes ... (elapsed 0.001 seconds) done.

[11119.621793] OOM killer disabled.

[11119.621794] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.

[11119.623048] printk: Suspending console(s) (use no_console_suspend to debug)

[11119.623694] serial 00:04: disabled

[11119.647691] sd 0:0:0:0: [sdb] Synchronizing SCSI cache

[11119.647760] sd 5:0:0:0: [sda] Synchronizing SCSI cache

[11119.647865] sd 5:0:0:0: [sda] Stopping disk

[11119.648621] sd 0:0:0:0: [sdb] Stopping disk

[11120.091859] ACPI: EC: interrupt blocked

[11120.111969] ACPI: Preparing to enter system sleep state S3

[11120.112526] ACPI: EC: event blocked

[11120.112527] ACPI: EC: EC stopped

[11120.112527] PM: Saving platform NVS memory

[11120.112833] Disabling non-boot CPUs ...

[11120.114058] smpboot: CPU 1 is now offline

[11120.115814] smpboot: CPU 2 is now offline

[11120.117443] smpboot: CPU 3 is now offline

[11120.118758] ACPI: Low-level resume complete

[11120.118777] ACPI: EC: EC started

[11120.118777] PM: Restoring platform NVS memory

[11120.119200] Enabling non-boot CPUs ...

[11120.119236] x86: Booting SMP configuration:

[11120.119238] smpboot: Booting Node 0 Processor 1 APIC 0x2

[11120.121518] smpboot: Scheduler frequency invariance went wobbly, disabling!

[11120.121833] CPU1 is up

[11120.121855] smpboot: Booting Node 0 Processor 2 APIC 0x4

[11120.124407] CPU2 is up

[11120.124428] smpboot: Booting Node 0 Processor 3 APIC 0x6

[11120.126985] CPU3 is up

[11120.129287] ACPI: Waking up from system sleep state S3

[11120.129809] ACPI: EC: interrupt unblocked

[11120.169092] ACPI: EC: event unblocked

[11120.169305] usb usb2: root hub lost power or was reset

[11120.169306] usb usb4: root hub lost power or was reset

[11120.170078] serial 00:04: activated

[11120.230456] sd 0:0:0:0: [sdb] Starting disk

[11120.230478] sd 5:0:0:0: [sda] Starting disk

[11120.465121] OOM killer enabled.

[11120.465122] Restarting tasks ... done.

[11120.475152] PM: suspend exit

[11120.485537] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE)

[11120.555695] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[11120.555939] ata1.00: supports DRM functions and may not be fully accessible

[11120.556281] ata1.00: disabling queued TRIM support

[11120.558038] ata1.00: supports DRM functions and may not be fully accessible

[11120.558407] ata1.00: disabling queued TRIM support

[11120.559968] ata1.00: configured for UDMA/133

[11120.560270] ata1.00: Enabling discard_zeroes_data

[11120.735021] r8169 0000:07:00.0 enp7s0: Link is Down

[11125.561006] ata6: link is slow to respond, please be patient (ready=0)

[11126.649064] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[11126.677040] ata6.00: configured for UDMA/133

[11254.516280] PM: hibernation: hibernation entry

[11254.524615] Filesystems sync: 0.008 seconds

[11254.524617] Freezing user space processes ... (elapsed 0.020 seconds) done.

[11254.545205] OOM killer disabled.

[11254.545317] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]

[11254.545318] PM: hibernation: Marking nosave pages: [mem 0x0009d000-0x000fffff]

[11254.545320] PM: hibernation: Marking nosave pages: [mem 0x20000000-0x201fffff]

[11254.545326] PM: hibernation: Marking nosave pages: [mem 0x40000000-0x401fffff]

[11254.545333] PM: hibernation: Marking nosave pages: [mem 0xbac1b000-0xbadcffff]

[11254.545337] PM: hibernation: Marking nosave pages: [mem 0xbadd2000-0xbae83fff]

[11254.545340] PM: hibernation: Marking nosave pages: [mem 0xbb000000-0xffffffff]

[11254.545977] PM: hibernation: Basic memory bitmaps created

[11254.546065] PM: hibernation: Preallocating image memory

[11255.271219] PM: hibernation: Allocated 1388922 pages for snapshot

[11255.271223] PM: hibernation: Allocated 5555688 kbytes in 0.72 seconds (7716.23 MB/s)

[11255.271224] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.

[11255.272641] printk: Suspending console(s) (use no_console_suspend to debug)

[11255.273200] serial 00:04: disabled

[11255.357339] ACPI: EC: interrupt blocked

[11255.358138] ACPI: Preparing to enter system sleep state S4

[11255.358766] ACPI: EC: event blocked

[11255.358766] ACPI: EC: EC stopped

[11255.358767] PM: Saving platform NVS memory

[11255.359063] Disabling non-boot CPUs ...

[11255.360310] smpboot: CPU 1 is now offline

[11255.362029] smpboot: CPU 2 is now offline

[11255.363745] smpboot: CPU 3 is now offline

[11255.364287] PM: hibernation: Creating image:

[11255.558580] PM: hibernation: Need to copy 1380435 pages

[11255.558582] PM: hibernation: Normal pages needed: 1380435 + 1024, available pages: 2790850

[11256.717683] PM: hibernation: Image created (1380435 pages copied)

[11255.364889] PM: Restoring platform NVS memory

[11255.365000] ACPI: EC: EC started

[11255.365317] Enabling non-boot CPUs ...

[11255.365351] x86: Booting SMP configuration:

[11255.365352] smpboot: Booting Node 0 Processor 1 APIC 0x2

[11255.367953] CPU1 is up

[11255.367981] smpboot: Booting Node 0 Processor 2 APIC 0x4

[11255.370604] CPU2 is up

[11255.370634] smpboot: Booting Node 0 Processor 3 APIC 0x6

[11255.373214] CPU3 is up

[11255.375454] ACPI: Waking up from system sleep state S4

[11255.375953] ACPI: EC: interrupt unblocked

[11255.398515] ACPI: EC: event unblocked

[11255.399430] serial 00:04: activated

[11255.724850] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[11255.724878] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[11255.729121] ata1.00: supports DRM functions and may not be fully accessible

[11255.729414] ata6.00: configured for UDMA/133

[11255.729511] ata1.00: disabling queued TRIM support

[11255.731447] ata1.00: supports DRM functions and may not be fully accessible

[11255.731829] ata1.00: disabling queued TRIM support

[11255.733441] ata1.00: configured for UDMA/133

[11255.733537] ata1.00: Enabling discard_zeroes_data

[11255.733949] PM: Using 3 thread(s) for compression

[11255.733952] PM: Compressing and saving image data (1383132 pages)...

[11255.733984] PM: Image saving progress:   0%

[11256.541934] PM: Image saving progress:  10%

[11257.360607] PM: Image saving progress:  20%

[11258.161636] PM: Image saving progress:  30%

[11259.008873] PM: Image saving progress:  40%

[11259.358897] PM: hibernation: Wrote 5532528 kbytes in 3.62 seconds (1528.32 MB/s)

[11259.568462] PM: hibernation: Basic memory bitmaps freed

[11259.568465] OOM killer enabled.

[11259.568465] Restarting tasks ... done.

[11259.580512] PM: hibernation: hibernation exit

[11259.598727] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE)

[11259.829428] r8169 0000:07:00.0 enp7s0: Link is Down

[11293.034575] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control rx/tx

[11293.034590] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready

[11352.446958] r8169 0000:07:00.0 enp7s0: Link is Down

[11354.115964] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control off

[11355.207848] r8169 0000:07:00.0 enp7s0: Link is Down

[11356.894836] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control off

[14254.099257] perf: interrupt took too long (3133 > 3130), lowering kernel.perf_event_max_sample_rate to 63750

[14767.322357] r8169 0000:07:00.0 enp7s0: Link is Down

[14767.541627] PM: hibernation: hibernation entry

[14767.552179] Filesystems sync: 0.010 seconds

[14767.552183] Freezing user space processes ... (elapsed 0.001 seconds) done.

[14767.553764] OOM killer disabled.

[14767.553925] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]

[14767.553927] PM: hibernation: Marking nosave pages: [mem 0x0009d000-0x000fffff]

[14767.553929] PM: hibernation: Marking nosave pages: [mem 0x20000000-0x201fffff]

[14767.553936] PM: hibernation: Marking nosave pages: [mem 0x40000000-0x401fffff]

[14767.553942] PM: hibernation: Marking nosave pages: [mem 0xbac1b000-0xbadcffff]

[14767.553948] PM: hibernation: Marking nosave pages: [mem 0xbadd2000-0xbae83fff]

[14767.553950] PM: hibernation: Marking nosave pages: [mem 0xbb000000-0xffffffff]

[14767.554645] PM: hibernation: Basic memory bitmaps created

[14767.554740] PM: hibernation: Preallocating image memory

[14768.315937] PM: hibernation: Allocated 1498004 pages for snapshot

[14768.315941] PM: hibernation: Allocated 5992016 kbytes in 0.76 seconds (7884.23 MB/s)

[14768.315941] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.

[14768.317375] printk: Suspending console(s) (use no_console_suspend to debug)

[14768.317875] serial 00:04: disabled

[14768.398161] ACPI: EC: interrupt blocked

[14768.398976] ACPI: Preparing to enter system sleep state S4

[14768.399657] ACPI: EC: event blocked

[14768.399657] ACPI: EC: EC stopped

[14768.399658] PM: Saving platform NVS memory

[14768.399974] Disabling non-boot CPUs ...

[14768.401203] smpboot: CPU 1 is now offline

[14768.403073] smpboot: CPU 2 is now offline

[14768.404924] smpboot: CPU 3 is now offline

[14768.405469] PM: hibernation: Creating image:

[14768.592461] PM: hibernation: Need to copy 1488990 pages

[14768.592463] PM: hibernation: Normal pages needed: 1488990 + 1024, available pages: 2682296

[14769.828651] PM: hibernation: Image created (1488990 pages copied)

[14768.406071] PM: Restoring platform NVS memory

[14768.406181] ACPI: EC: EC started

[14768.406484] Enabling non-boot CPUs ...

[14768.406519] x86: Booting SMP configuration:

[14768.406520] smpboot: Booting Node 0 Processor 1 APIC 0x2

[14768.409102] CPU1 is up

[14768.409130] smpboot: Booting Node 0 Processor 2 APIC 0x4

[14768.411686] CPU2 is up

[14768.411707] smpboot: Booting Node 0 Processor 3 APIC 0x6

[14768.414282] CPU3 is up

[14768.416525] ACPI: Waking up from system sleep state S4

[14768.417050] ACPI: EC: interrupt unblocked

[14768.435207] ACPI: EC: event unblocked

[14768.436062] serial 00:04: activated

[14768.761614] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[14768.761640] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[14768.765503] ata6.00: configured for UDMA/133

[14768.765718] ata1.00: supports DRM functions and may not be fully accessible

[14768.766104] ata1.00: disabling queued TRIM support

[14768.768100] ata1.00: supports DRM functions and may not be fully accessible

[14768.768486] ata1.00: disabling queued TRIM support

[14768.770096] ata1.00: configured for UDMA/133

[14768.770223] ata1.00: Enabling discard_zeroes_data

[14768.771141] PM: Using 3 thread(s) for compression

[14768.771143] PM: Compressing and saving image data (1491899 pages)...

[14768.771161] PM: Image saving progress:   0%

[14769.624095] PM: Image saving progress:  10%

[14770.481023] PM: Image saving progress:  20%

[14771.359354] PM: Image saving progress:  30%

[14772.217546] PM: Image saving progress:  40%

[14772.484278] PM: hibernation: Wrote 5967596 kbytes in 3.71 seconds (1608.51 MB/s)

[14772.666085] PM: hibernation: Basic memory bitmaps freed

[14772.666087] OOM killer enabled.

[14772.666088] Restarting tasks ... done.

[14772.667992] PM: hibernation: hibernation exit

[14772.689180] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE)

[14772.934958] r8169 0000:07:00.0 enp7s0: Link is Down

[14774.477108] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control off

[14774.477125] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready

[15391.640482] vboxdrv: 0000000051584598 VMMR0.r0

[15391.770715] vboxdrv: 000000001a4cffd4 VBoxDDR0.r0

[15391.809774] vboxdrv: 00000000c91e5c07 VBoxEhciR0.r0

[15391.810842] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)

[15448.725893] vboxdrv: 0000000059ec3717 VMMR0.r0

[15448.812425] vboxdrv: 000000000ba15ccd VBoxDDR0.r0

[15448.839483] vboxdrv: 000000007a102ace VBoxEhciR0.r0

[15448.840217] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)

[15612.028229] r8169 0000:07:00.0 enp7s0: Link is Down

[15612.257618] PM: hibernation: hibernation entry

[15612.270075] Filesystems sync: 0.012 seconds

[15612.270078] Freezing user space processes ... (elapsed 0.001 seconds) done.

[15612.271869] OOM killer disabled.

[15612.271992] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]

[15612.271993] PM: hibernation: Marking nosave pages: [mem 0x0009d000-0x000fffff]

[15612.271995] PM: hibernation: Marking nosave pages: [mem 0x20000000-0x201fffff]

[15612.272002] PM: hibernation: Marking nosave pages: [mem 0x40000000-0x401fffff]

[15612.272008] PM: hibernation: Marking nosave pages: [mem 0xbac1b000-0xbadcffff]

[15612.272014] PM: hibernation: Marking nosave pages: [mem 0xbadd2000-0xbae83fff]

[15612.272016] PM: hibernation: Marking nosave pages: [mem 0xbb000000-0xffffffff]

[15612.272716] PM: hibernation: Basic memory bitmaps created

[15612.272795] PM: hibernation: Preallocating image memory

[15614.083523] PM: hibernation: Allocated 1469138 pages for snapshot

[15614.083526] PM: hibernation: Allocated 5876552 kbytes in 1.81 seconds (3246.71 MB/s)

[15614.083527] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.

[15614.085013] printk: Suspending console(s) (use no_console_suspend to debug)

[15614.085667] serial 00:04: disabled

[15614.158321] ACPI: EC: interrupt blocked

[15614.159092] ACPI: Preparing to enter system sleep state S4

[15614.159771] ACPI: EC: event blocked

[15614.159772] ACPI: EC: EC stopped

[15614.159772] PM: Saving platform NVS memory

[15614.160081] Disabling non-boot CPUs ...

[15614.161322] smpboot: CPU 1 is now offline

[15614.163023] smpboot: CPU 2 is now offline

[15614.164695] smpboot: CPU 3 is now offline

[15614.165217] PM: hibernation: Creating image:

[15614.359245] PM: hibernation: Need to copy 1467410 pages

[15614.359247] PM: hibernation: Normal pages needed: 1467410 + 1024, available pages: 2703876

[15615.580994] PM: hibernation: Image created (1467410 pages copied)

[15614.165821] PM: Restoring platform NVS memory

[15614.165922] ACPI: EC: EC started

[15614.166222] Enabling non-boot CPUs ...

[15614.166258] x86: Booting SMP configuration:

[15614.166259] smpboot: Booting Node 0 Processor 1 APIC 0x2

[15614.168833] CPU1 is up

[15614.168870] smpboot: Booting Node 0 Processor 2 APIC 0x4

[15614.171445] CPU2 is up

[15614.171464] smpboot: Booting Node 0 Processor 3 APIC 0x6

[15614.174043] CPU3 is up

[15614.176297] ACPI: Waking up from system sleep state S4

[15614.176814] ACPI: EC: interrupt unblocked

[15614.195424] ACPI: EC: event unblocked

[15614.196367] serial 00:04: activated

[15614.521763] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[15614.521790] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[15614.525621] ata6.00: configured for UDMA/133

[15614.525802] ata1.00: supports DRM functions and may not be fully accessible

[15614.526341] ata1.00: disabling queued TRIM support

[15614.528243] ata1.00: supports DRM functions and may not be fully accessible

[15614.528661] ata1.00: disabling queued TRIM support

[15614.530190] ata1.00: configured for UDMA/133

[15614.530307] ata1.00: Enabling discard_zeroes_data

[15614.530752] PM: Using 3 thread(s) for compression

[15614.530753] PM: Compressing and saving image data (1470277 pages)...

[15614.530785] PM: Image saving progress:   0%

[15615.346309] PM: Image saving progress:  10%

[15616.151724] PM: Image saving progress:  20%

[15616.944061] PM: Image saving progress:  30%

[15617.735560] PM: Image saving progress:  40%

[15618.678687] PM: Image saving progress:  50%

[15618.686602] PM: hibernation: Wrote 5881108 kbytes in 4.15 seconds (1417.13 MB/s)

[15618.869263] PM: hibernation: Basic memory bitmaps freed

[15618.869266] OOM killer enabled.

[15618.869267] Restarting tasks ... done.

[15618.871573] PM: hibernation: hibernation exit

[15618.902557] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE)

[15619.193269] r8169 0000:07:00.0 enp7s0: Link is Down

[15620.843239] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control off

[15620.843250] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready

[16007.991733] ata1.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0

[16007.991737] ata1.00: irq_stat 0x40000008

[16007.991740] ata1.00: failed command: READ FPDMA QUEUED

[16007.991743] ata1.00: cmd 60/c0:f0:28:ee:b3/00:00:25:00:00/40 tag 30 ncq dma 98304 in

                        res 41/40:c0:88:ee:b3/00:00:25:00:00/00 Emask 0x409 (media error) <F>

[16007.991744] ata1.00: status: { DRDY ERR }

[16007.991745] ata1.00: error: { UNC }

[16007.992045] ata1.00: supports DRM functions and may not be fully accessible

[16007.992505] ata1.00: disabling queued TRIM support

[16007.994268] ata1.00: supports DRM functions and may not be fully accessible

[16007.994620] ata1.00: disabling queued TRIM support

[16007.996493] ata1.00: configured for UDMA/133

[16007.996504] sd 0:0:0:0: [sdb] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s

[16007.996506] sd 0:0:0:0: [sdb] tag#30 Sense Key : Medium Error [current] 

[16007.996508] sd 0:0:0:0: [sdb] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed

[16007.996510] sd 0:0:0:0: [sdb] tag#30 CDB: Read(10) 28 00 25 b3 ee 28 00 00 c0 00

[16007.996512] blk_update_request: I/O error, dev sdb, sector 632549000 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 0

[16007.996525] ata1: EH complete

[16007.996587] ata1.00: Enabling discard_zeroes_data

[18823.498087] vboxdrv: 000000002c14370e VMMR0.r0

[18823.645659] vboxdrv: 000000006d4b7fe9 VBoxDDR0.r0

[18823.675999] vboxdrv: 000000007c9c4d07 VBoxEhciR0.r0

[18823.676887] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)

[22555.702420] perf: interrupt took too long (3930 > 3916), lowering kernel.perf_event_max_sample_rate to 50750

[29498.571216] r8169 0000:07:00.0 enp7s0: Link is Down

[29498.581839] PM: hibernation: hibernation entry

[29498.591801] Filesystems sync: 0.009 seconds

[29498.591804] Freezing user space processes ... (elapsed 0.001 seconds) done.

[29498.593453] OOM killer disabled.

[29498.593575] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]

[29498.593576] PM: hibernation: Marking nosave pages: [mem 0x0009d000-0x000fffff]

[29498.593578] PM: hibernation: Marking nosave pages: [mem 0x20000000-0x201fffff]

[29498.593585] PM: hibernation: Marking nosave pages: [mem 0x40000000-0x401fffff]

[29498.593592] PM: hibernation: Marking nosave pages: [mem 0xbac1b000-0xbadcffff]

[29498.593597] PM: hibernation: Marking nosave pages: [mem 0xbadd2000-0xbae83fff]

[29498.593600] PM: hibernation: Marking nosave pages: [mem 0xbb000000-0xffffffff]

[29498.594294] PM: hibernation: Basic memory bitmaps created

[29498.594385] PM: hibernation: Preallocating image memory

[29499.320684] PM: hibernation: Allocated 1384915 pages for snapshot

[29499.320688] PM: hibernation: Allocated 5539660 kbytes in 0.72 seconds (7693.97 MB/s)

[29499.320689] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.

[29499.322116] printk: Suspending console(s) (use no_console_suspend to debug)

[29499.322685] serial 00:04: disabled

[29499.390979] ACPI: EC: interrupt blocked

[29499.391772] ACPI: Preparing to enter system sleep state S4

[29499.392404] ACPI: EC: event blocked

[29499.392405] ACPI: EC: EC stopped

[29499.392405] PM: Saving platform NVS memory

[29499.392717] Disabling non-boot CPUs ...

[29499.393965] smpboot: CPU 1 is now offline

[29499.395669] smpboot: CPU 2 is now offline

[29499.397247] smpboot: CPU 3 is now offline

[29499.397830] PM: hibernation: Creating image:

[29499.589407] PM: hibernation: Need to copy 1383304 pages

[29499.589409] PM: hibernation: Normal pages needed: 1383304 + 1024, available pages: 2787988

[29500.748241] PM: hibernation: Image created (1383304 pages copied)

[29499.398435] PM: Restoring platform NVS memory

[29499.398546] ACPI: EC: EC started

[29499.398855] Enabling non-boot CPUs ...

[29499.398888] x86: Booting SMP configuration:

[29499.398889] smpboot: Booting Node 0 Processor 1 APIC 0x2

[29499.401474] CPU1 is up

[29499.401540] smpboot: Booting Node 0 Processor 2 APIC 0x4

[29499.404097] CPU2 is up

[29499.404117] smpboot: Booting Node 0 Processor 3 APIC 0x6

[29499.406686] CPU3 is up

[29499.408933] ACPI: Waking up from system sleep state S4

[29499.409457] ACPI: EC: interrupt unblocked

[29499.428108] ACPI: EC: event unblocked

[29499.429035] serial 00:04: activated

[29499.758514] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[29499.758540] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[29499.762671] ata6.00: configured for UDMA/133

[29499.762697] ata1.00: supports DRM functions and may not be fully accessible

[29499.763147] ata1.00: disabling queued TRIM support

[29499.765139] ata1.00: supports DRM functions and may not be fully accessible

[29499.765527] ata1.00: disabling queued TRIM support

[29499.767138] ata1.00: configured for UDMA/133

[29499.767248] ata1.00: Enabling discard_zeroes_data

[29499.767813] PM: Using 3 thread(s) for compression

[29499.767816] PM: Compressing and saving image data (1386006 pages)...

[29499.767853] PM: Image saving progress:   0%

[29500.589985] PM: Image saving progress:  10%

[29501.384015] PM: Image saving progress:  20%

[29502.133755] PM: Image saving progress:  30%

[29502.895544] PM: Image saving progress:  40%

[29503.411105] PM: hibernation: Wrote 5544024 kbytes in 3.64 seconds (1523.08 MB/s)

[29503.618720] PM: hibernation: Basic memory bitmaps freed

[29503.618723] OOM killer enabled.

[29503.618723] Restarting tasks ... done.

[29503.628499] PM: hibernation: hibernation exit

[29503.644258] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE)

[29503.874365] r8169 0000:07:00.0 enp7s0: Link is Down

[29505.532146] r8169 0000:07:00.0 enp7s0: Link is Up - 100Mbps/Full - flow control off

[29505.532163] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready

anonyme · 18-02-2022 22:16:59

Bonsoir

de wikipedia => https://fr.wikipedia.org/wiki/Hibernati … ormatique)
de ton rerour de dmesg

[29499.393965] smpboot: CPU 1 is now offline

[29499.395669] smpboot: CPU 2 is now offline

[29499.397247] smpboot: CPU 3 is now offline

[29499.397830] PM: hibernation: Creating image:

[29499.589407] PM: hibernation: Need to copy 1383304 pages

[29499.589409] PM: hibernation: Normal pages needed: 1383304 + 1024, available pages: 2787988

[29500.748241] PM: hibernation: Image created (1383304 pages copied)

ceci me dit que tu est en veille en ram (mémoire vive )
seul le cpu0 est actif (cpu1 , 2 et 3 offline (inactif) (ton processeur doit être un quad core ).
l'image du système est en mémoire (pas sur le disque )
le retour sur le bureau est immédiat
la machine n'est pas éteinte , mais en faible consommation

tu a combien de mémoire "ram" et combien fait ton swap ?

j' avoue mélanger les deux type de veille
1) une éteint complètement l'ordinateur et sauve le contenu de la mémoire sur le disque
2) l'autre sauvegarde le système en mémoire et met le système en faible consommation . (pas d' écriture sur le disque )

ps : dans le premier cas le voyant d'alimentation clignote

Dernière modification par anonyme (18-02-2022 22:32:17)

totoZero7 · 18-02-2022 22:24:25

j'ai 16Go de ram
et le swap indique 1Go, je n'ai rien réglé de spécifique lors de l'installation. Je crois me souvenir que le swap de la version de Debian 10 (le système d'avant sur ce même pc) était beaucoup plus gros.

anonyme · 18-02-2022 22:29:32

oui c'est un bug de l' installateur , soit le modifier a l'installation (partition en manuel)
soit le modifier par la suite avec un live et gparted (ou si tu a un double boot avec une autre debian )

totoZero7 · 18-02-2022 22:37:48

Je n'ai pas de double boot donc cela sera avec un live

Mais est-ce possible sur un disque chiffré ? (tout est mis dans une partition je crois, j'ai fait au plus simple n'y comprenant pas grand chose)
Comment y arriver sans faire de bêtise ?

Quelle taille donner au swap ?

Dernière modification par totoZero7 (18-02-2022 22:38:57)

raleur · 18-02-2022 23:59:47

Poste la sortie de lsblk.

totoZero7 · 19-02-2022 00:01:47

lsblk

NAME                   MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT

sda                      8:0    0 931,5G  0 disk  

└─sda1                   8:1    0 931,5G  0 part  

  └─sdc1               254:3    0 931,5G  0 crypt /disk3

sdb                      8:16   0 931,5G  0 disk  

├─sdb1                   8:17   0   487M  0 part  /boot

├─sdb2                   8:18   0     1K  0 part  

└─sdb5                   8:21   0   931G  0 part  

  └─sda5_crypt         254:0    0   931G  0 crypt 

    ├─debM11SSD-root   254:1    0 930,1G  0 lvm   /

    └─debM11SSD-swap_1 254:2    0   976M  0 lvm   [SWAP]

totoZero7 · 19-02-2022 00:20:54

je viens de voir ton message édité

anonyme a écrit :

j' avoue mélanger les deux type de veille
1) une éteint complètement l'ordinateur et sauve le contenu de la mémoire sur le disque
2) l'autre sauvegarde le système en mémoire et met le système en faible consommation . (pas d' écriture sur le disque )

le 1 c'est ce que je cherche à faire avec "l'hibernation" sur le disque
le 2 c'est stocké dans la ram " la veille"

raleur · 19-02-2022 00:55:21

C'est une installation avec LVM chiffré. Et bien sûr, tu n'as pas réservé d'espace libre, sinon ça aurait été trop facile, donc pour agrandir le volume swap il faut réduire le volume racine...
Lancer un système live, ouvrir le volume chiffré, activer les volumes logiques, réduire le système de fichiers du volume racine, réduire le volume racine, agrandir et reformater le volume swap. Et laisser de l'espace libre au cas où il faudrait encore agrandir le swap. Dans le cas contraire, il sera très facile de réallouer cet espace au volume racine.

Pour la taille du swap, ça dépend de la quantité de mémoire utilisée au moment de l'hibernation. Dans les logs on peut voir

Normal pages needed: 1488990 + 1024

soit environ 6 Go (1 page = 4 Kio). Evidemment, ça ne rentre pas dans 1 Go de swap.
Il vaut mieux prendre de la marge et prévoir large.

Yal · 19-02-2022 10:24:45

Je me greffe sur ce thread pour une question con (enfin, elle l'est peut-être mais j'avoue que ça l'est pas du tout pour moi qui essaye de comprendre comment tout ça fonctionne) :

Si on crée de la swap pour stocker la mémoire vive durant l'hibernation, est-ce que ça ne revient pas à dire qu'à l'hibernation on stocke ce qui est dans la RAM dans un disque non-chiffré... Annulant du coup l'utilité d'avoir un disque chiffré pour nos données? Je veux dire, il suffirait d'avoir tel ou tel document sensible (genre des mots de passe) ouvert au moment de la mise en hibernation pour que ce doc soit enregistré dans la swap et donc soit lisible par un vilain pirate qui mettrait la main sur l'ordi? Ou alors j'ai rien pigé?

raleur · 19-02-2022 10:54:33

Le swap peut être chiffré. C'est le cas ici, comme lorsqu'on choisit le partitionnement assisté avec LVM chiffré.
D'ailleurs il me semble que l'installateur râle si le système est chiffré mais pas le swap.

Dernière modification par raleur (19-02-2022 10:56:19)

totoZero7 · 19-02-2022 14:33:09

Les étapes :

1. Lancer un système live - OK - J'ai lancé mon ancien Disque dur HDD ST1000
2. ouvrir le volume chiffré - OK - Note: Je découvre qu'il y a 2 secteurs endommagés sur mon SSD Samsung principale (celui dont je dois agrandir le swap), ça craint ?
file-Rba64eada2362420a569da19c94c7adac

3. activer les volumes logiques - Est-ce que je dois monter la partition "root" avant ? Comment activer les volumes logiques ?
4. réduire le système de fichiers du volume racine - Comment ?
5. réduire le volume racine - Comment ?
6. agrandir et reformater le volume swap. - Comment ?
7. Et laisser de l'espace libre au cas où il faudrait encore agrandir le swap. - Comment ?

raleur · 19-02-2022 14:50:59

2. Il faudrait vérifier ce que sont exactement ces secteurs "endommagés" avec smartctl -a. Reallocated, ça va. Pending ou Uncorrectable, c'est ennuyeux.

3. Ce n'est pas une partition mais un volume logique. Non, il ne faut pas le monter sinon il ne sera pas possible de le réduire.
Pas besoin d'activer les volumes logiques, ils le sont déjà.

4. Réduire le système de fichiers avec resize2fs qui exigera fsck avant. Ou bien en même temps que la réduction du volume avec l'option --resizefs (jamais utilisée, je ne connais pas sa fiabilité).

5. Réduire le volume logique avec lvreduce. Attention : réduire un volume logique ou une partition sans avoir réduit son système de fichiers rend ce dernier inutilisable.

6. Agrandir le volume logique avec lvextend et le reformater avec mkswap.

7. Lors des opérations précédentes, réduire de X Go et agrandir de Y Go avec X = Y + Z pour disposer de Z Go libres.

Consulter les pages de manuel de toutes ces commandes pour les détails.

Dernière modification par raleur (19-02-2022 14:51:25)

totoZero7 · 14-06-2022 20:46:27

J'ai formaté le PC en agrandissant le swap lors de l'installation avec l'assistant.
petit tuto ici:
https://debian-facile.org/atelier:chant … -debian-11

Problème résolu

Debian-facile

#1 18-02-2022 18:29:44

[résolu] Hiberner ne fonctionne pas

#2 18-02-2022 21:52:47

Re : [résolu] Hiberner ne fonctionne pas

#3 18-02-2022 21:58:09

Re : [résolu] Hiberner ne fonctionne pas

#4 18-02-2022 22:16:59

Re : [résolu] Hiberner ne fonctionne pas

#5 18-02-2022 22:24:25

Re : [résolu] Hiberner ne fonctionne pas

#6 18-02-2022 22:29:32

Re : [résolu] Hiberner ne fonctionne pas

#7 18-02-2022 22:37:48

Re : [résolu] Hiberner ne fonctionne pas

#8 18-02-2022 23:59:47

Re : [résolu] Hiberner ne fonctionne pas

#9 19-02-2022 00:01:47

Re : [résolu] Hiberner ne fonctionne pas

#10 19-02-2022 00:20:54

Re : [résolu] Hiberner ne fonctionne pas

#11 19-02-2022 00:55:21

Re : [résolu] Hiberner ne fonctionne pas

#12 19-02-2022 10:24:45

Re : [résolu] Hiberner ne fonctionne pas

#13 19-02-2022 10:54:33

Re : [résolu] Hiberner ne fonctionne pas

#14 19-02-2022 14:33:09

Re : [résolu] Hiberner ne fonctionne pas

#15 19-02-2022 14:50:59

Re : [résolu] Hiberner ne fonctionne pas

#16 14-06-2022 20:46:27

Re : [résolu] Hiberner ne fonctionne pas

Pied de page des forums