je sais pas / plus . je pige rien .
tout ce bordel à cause d'un paquet merdique .
j'en reviens pas .
bon , à priori , sur tous les kernel (5.16 et bureau mate ) l' imprimante ne fonctionne pas .
j' essaie ceci , si çà peut aider . kernel 5.16.0-1
[sudo] Mot de passe de alain :
[ 1.524787] usbcore: registered new interface driver usbfs
[ 1.524791] usbcore: registered new interface driver hub
[ 1.524806] usbcore: registered new device driver usb
[ 1.534888] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 1.534889] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.534890] usb usb1: Product: xHCI Host Controller
[ 1.534891] usb usb1: Manufacturer: Linux 5.16.0-1-amd64 xhci-hcd
[ 1.534892] usb usb1: SerialNumber: 0000:05:00.1
[ 1.535464] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.535475] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[ 1.535477] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.535478] usb usb2: Product: xHCI Host Controller
[ 1.535479] usb usb2: Manufacturer: Linux 5.16.0-1-amd64 xhci-hcd
[ 1.535479] usb usb2: SerialNumber: 0000:05:00.1
[ 1.536361] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 1.536363] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.536364] usb usb3: Product: xHCI Host Controller
[ 1.536365] usb usb3: Manufacturer: Linux 5.16.0-1-amd64 xhci-hcd
[ 1.536366] usb usb3: SerialNumber: 0000:05:00.3
[ 1.536876] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.536886] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[ 1.536887] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.536888] usb usb4: Product: xHCI Host Controller
[ 1.536889] usb usb4: Manufacturer: Linux 5.16.0-1-amd64 xhci-hcd
[ 1.536890] usb usb4: SerialNumber: 0000:05:00.3
[ 1.537105] usb: port power management may be unreliable
[ 1.537525] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 1.537526] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.537527] usb usb5: Product: xHCI Host Controller
[ 1.537527] usb usb5: Manufacturer: Linux 5.16.0-1-amd64 xhci-hcd
[ 1.537528] usb usb5: SerialNumber: 0000:0c:00.3
[ 1.537689] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.537699] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[ 1.537700] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.537701] usb usb6: Product: xHCI Host Controller
[ 1.537702] usb usb6: Manufacturer: Linux 5.16.0-1-amd64 xhci-hcd
[ 1.537702] usb usb6: SerialNumber: 0000:0c:00.3
[ 1.788294] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[ 1.792295] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 1.792298] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 1.953907] usb 3-4: config 1 has an invalid interface number: 2 but max is 1
[ 1.953908] usb 3-4: config 1 has no interface number 1
[ 1.965906] usb 3-4: New USB device found, idVendor=0b05, idProduct=18f3, bcdDevice= 1.00
[ 1.965908] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.965909] usb 3-4: Product: AURA LED Controller
[ 1.965909] usb 3-4: Manufacturer: AsusTek Computer Inc.
[ 1.965910] usb 3-4: SerialNumber: 9876543210
[ 1.985946] usbcore: registered new interface driver usbhid
[ 1.985947] usbhid: USB HID core driver
[ 1.987059] hid-generic 0003:0B05:18F3.0001: hiddev0,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:05:00.3-4/input2
[ 2.139834] usb 5-2: New USB device found, idVendor=03f0, idProduct=e807, bcdDevice=11.16
[ 2.139837] usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 2.139838] usb 5-2: Product: HP Webcam HD 4310
[ 2.139839] usb 5-2: Manufacturer: Hewlett Packard
[ 2.160502] usb 1-6: New USB device found, idVendor=0951, idProduct=16a4, bcdDevice= 0.30
[ 2.160504] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.160505] usb 1-6: Product: HyperX Virtual Surround Sound
[ 2.160506] usb 1-6: Manufacturer: Kingston
[ 2.160507] usb 1-6: SerialNumber: 00000000
[ 2.216973] hid-generic 0003:03F0:E807.0002: hiddev1,hidraw1: USB HID v1.11 Device [Hewlett Packard HP Webcam HD 4310] on usb-0000:0c:00.3-2/input4
[ 2.279679] input: Kingston HyperX Virtual Surround Sound Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.1/usb1/1-6/1-6:1.3/0003:0951:16A4.0003/input/input2
[ 2.336310] input: Kingston HyperX Virtual Surround Sound as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.1/usb1/1-6/1-6:1.3/0003:0951:16A4.0003/input/input3
[ 2.336369] hid-generic 0003:0951:16A4.0003: input,hiddev2,hidraw2: USB HID v1.11 Device [Kingston HyperX Virtual Surround Sound] on usb-0000:05:00.1-6/input3
[ 2.344306] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[ 2.517722] usb 5-3: New USB device found, idVendor=1b1c, idProduct=1b3d, bcdDevice=30.08
[ 2.517724] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.517725] usb 5-3: Product: Corsair Gaming K55 RGB Keyboard
[ 2.517725] usb 5-3: Manufacturer: Corsair
[ 2.517726] usb 5-3: SerialNumber: AF7B98475F8876F7F5001C0540048000
[ 2.536026] input: Corsair Corsair Gaming K55 RGB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-3/5-3:1.0/0003:1B1C:1B3D.0004/input/input4
[ 2.592361] input: Corsair Corsair Gaming K55 RGB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-3/5-3:1.0/0003:1B1C:1B3D.0004/input/input5
[ 2.592373] input: Corsair Corsair Gaming K55 RGB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-3/5-3:1.0/0003:1B1C:1B3D.0004/input/input6
[ 2.592416] hid-generic 0003:1B1C:1B3D.0004: input,hiddev3,hidraw3: USB HID v1.11 Keyboard [Corsair Corsair Gaming K55 RGB Keyboard] on usb-0000:0c:00.3-3/input0
[ 2.597826] hid-generic 0003:1B1C:1B3D.0005: hiddev4,hidraw4: USB HID v1.11 Device [Corsair Corsair Gaming K55 RGB Keyboard] on usb-0000:0c:00.3-3/input1
[ 2.724296] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[ 2.896727] usb 5-4: New USB device found, idVendor=1b1c, idProduct=1b2e, bcdDevice= 3.06
[ 2.896729] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.896730] usb 5-4: Product: Corsair Gaming M65 Pro RGB Mouse
[ 2.896731] usb 5-4: Manufacturer: Corsair
[ 2.896732] usb 5-4: SerialNumber: 0904102FAF791CA75F20F5F3F5001C04
[ 2.915836] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.0/0003:1B1C:1B2E.0006/input/input7
[ 2.915871] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.0/0003:1B1C:1B2E.0006/input/input8
[ 2.915884] input: Corsair Corsair Gaming M65 Pro RGB Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-4/5-4:1.0/0003:1B1C:1B2E.0006/input/input9
[ 2.915916] hid-generic 0003:1B1C:1B2E.0006: input,hiddev5,hidraw5: USB HID v1.11 Mouse [Corsair Corsair Gaming M65 Pro RGB Mouse] on usb-0000:0c:00.3-4/input0
[ 2.923824] hid-generic 0003:1B1C:1B2E.0007: hiddev6,hidraw6: USB HID v1.11 Device [Corsair Corsair Gaming M65 Pro RGB Mouse] on usb-0000:0c:00.3-4/input1
[ 6.368105] usb 5-2: Found UVC 1.00 device HP Webcam HD 4310 (03f0:e807)
[ 6.405294] input: HP Webcam HD 4310: HP Webcam HD as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-2/5-2:1.0/input/input18
[ 6.405344] usbcore: registered new interface driver uvcvideo
[ 6.518075] usb 5-2: current rate 48000 is different from the runtime rate 8000
[ 6.563951] usb 5-2: current rate 48000 is different from the runtime rate 16000
[ 6.627828] usb 5-2: current rate 48000 is different from the runtime rate 44100
[ 6.760960] usbcore: registered new interface driver snd-usb-audio
sudo tail -n 200 /var/log/syslog
[sudo] Mot de passe de alain :
Mar 30 19:05:16 sid /usr/libexec/gdm-x-session[4931]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:05:26 sid /usr/libexec/gdm-x-session[4973]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:05:26 sid /usr/libexec/gdm-x-session[4973]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:05:36 sid /usr/libexec/gdm-x-session[5018]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:05:36 sid /usr/libexec/gdm-x-session[5018]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:05:46 sid /usr/libexec/gdm-x-session[5067]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:05:46 sid /usr/libexec/gdm-x-session[5067]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:05:53 sid /usr/libexec/gdm-x-session[3024]: [2022-03-30 19:05:53.034] [234] (audio_device_pulse_linux.cc:1861): Can't query latency
Mar 30 19:05:56 sid /usr/libexec/gdm-x-session[5120]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:05:56 sid /usr/libexec/gdm-x-session[5120]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:06:06 sid /usr/libexec/gdm-x-session[5185]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:06:06 sid /usr/libexec/gdm-x-session[5185]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:06:13 sid /usr/libexec/gdm-x-session[5224]: ATTENTION: default value of option mesa_glthread overridden by environment.
Mar 30 19:06:13 sid /usr/libexec/gdm-x-session[5224]: ATTENTION: default value of option mesa_glthread overridden by environment.
Mar 30 19:06:13 sid /usr/libexec/gdm-x-session[5224]: ATTENTION: default value of option mesa_glthread overridden by environment.
Mar 30 19:06:13 sid /usr/libexec/gdm-x-session[5224]: ATTENTION: default value of option mesa_glthread overridden by environment.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 6 threads of 3 processes of 1 users.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 6 threads of 3 processes of 1 users.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 6 threads of 3 processes of 1 users.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 6 threads of 3 processes of 1 users.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 6 threads of 3 processes of 1 users.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 6 threads of 3 processes of 1 users.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Successfully made thread 5483 of process 5224 owned by '1000' RT at priority 10.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:13 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:14 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:14 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:14 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:14 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:14 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:14 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:16 sid /usr/libexec/gdm-x-session[5683]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:06:16 sid /usr/libexec/gdm-x-session[5683]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:06:16 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:16 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:24 sid /usr/libexec/gdm-x-session[3024]: [2022-03-30 19:06:24.564] [234] (audio_device_pulse_linux.cc:1861): Can't query latency
Mar 30 19:06:26 sid /usr/libexec/gdm-x-session[5747]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:06:26 sid /usr/libexec/gdm-x-session[5747]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:06:36 sid /usr/libexec/gdm-x-session[5795]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:06:36 sid /usr/libexec/gdm-x-session[5795]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:06:46 sid /usr/libexec/gdm-x-session[5838]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:06:46 sid /usr/libexec/gdm-x-session[5838]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:06:49 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:49 sid rtkit-daemon[1134]: Supervising 7 threads of 4 processes of 1 users.
Mar 30 19:06:56 sid /usr/libexec/gdm-x-session[5921]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:06:56 sid /usr/libexec/gdm-x-session[5921]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:07:06 sid /usr/libexec/gdm-x-session[6002]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:07:06 sid /usr/libexec/gdm-x-session[6002]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:07:16 sid /usr/libexec/gdm-x-session[6046]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:07:16 sid /usr/libexec/gdm-x-session[6046]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:07:26 sid /usr/libexec/gdm-x-session[6088]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:07:26 sid /usr/libexec/gdm-x-session[6088]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:07:36 sid /usr/libexec/gdm-x-session[6129]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:07:36 sid /usr/libexec/gdm-x-session[6129]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:07:36 sid /usr/libexec/gdm-x-session[3024]: [2022-03-30 19:07:36.567] [234] (audio_device_pulse_linux.cc:1861): Can't query latency
Mar 30 19:07:46 sid /usr/libexec/gdm-x-session[6170]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:07:46 sid /usr/libexec/gdm-x-session[6170]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:07:46 sid kernel: [ 435.343728] usb 5-1: new high-speed USB device number 5 using xhci_hcd
Mar 30 19:07:46 sid kernel: [ 435.498174] usb 5-1: New USB device found, idVendor=03f0, idProduct=c311, bcdDevice= 1.00
Mar 30 19:07:46 sid kernel: [ 435.498180] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 30 19:07:46 sid kernel: [ 435.498182] usb 5-1: Product: ENVY 5530 series
Mar 30 19:07:46 sid kernel: [ 435.498184] usb 5-1: Manufacturer: HP
Mar 30 19:07:46 sid kernel: [ 435.498186] usb 5-1: SerialNumber: CN595530XD06BX
Mar 30 19:07:46 sid root: loading HP Device 005 005
Mar 30 19:07:46 sid systemd-udevd[6199]: 5-1: Process '/bin/sh -c '/usr/bin/nohup /usr/bin/hp-config_usb_printer 005:005'' failed with exit code 127.
Mar 30 19:07:46 sid systemd[2096]: Reached target Printer.
Mar 30 19:07:46 sid systemd[1]: Reached target Printer Support.
Mar 30 19:07:46 sid systemd[1]: Started Daemon for IPP over USB printer support.
Mar 30 19:07:46 sid kernel: [ 435.568084] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:07:46 sid kernel: [ 435.568102] usbcore: registered new interface driver usblp
Mar 30 19:07:46 sid kernel: [ 435.569178] usb-storage 5-1:1.2: USB Mass Storage device detected
Mar 30 19:07:46 sid kernel: [ 435.569271] scsi host7: usb-storage 5-1:1.2
Mar 30 19:07:46 sid kernel: [ 435.569317] usbcore: registered new interface driver usb-storage
Mar 30 19:07:46 sid kernel: [ 435.570754] usbcore: registered new interface driver uas
Mar 30 19:07:46 sid kernel: [ 435.588622] usblp3: removed
Mar 30 19:07:46 sid colord-sane: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
Mar 30 19:07:46 sid colord-sane: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
Mar 30 19:07:46 sid colord-sane: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
Mar 30 19:07:46 sid colord-sane: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
Mar 30 19:07:46 sid colord-sane: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
Mar 30 19:07:46 sid colord-sane: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
Mar 30 19:07:52 sid kernel: [ 441.282018] usb 5-1: reset high-speed USB device number 5 using xhci_hcd
Mar 30 19:07:52 sid kernel: [ 441.442872] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:07:54 sid kernel: [ 443.588097] usblp3: removed
Mar 30 19:07:56 sid /usr/libexec/gdm-x-session[6262]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:07:56 sid /usr/libexec/gdm-x-session[6262]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:00 sid kernel: [ 449.250022] usb 5-1: reset high-speed USB device number 5 using xhci_hcd
Mar 30 19:08:00 sid kernel: [ 449.410744] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:08:02 sid kernel: [ 451.588848] usblp3: removed
Mar 30 19:08:06 sid /usr/libexec/gdm-x-session[6326]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:06 sid /usr/libexec/gdm-x-session[6326]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:325: DeprecationWarning: Gtk.ActionGroup.list_actions is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: for action in printer_manager_action_group.list_actions ():
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:326: DeprecationWarning: Gtk.Action.set_sensitive is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: action.set_sensitive (False)
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:334: DeprecationWarning: Gtk.ActionGroup.get_action is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: act = printer_manager_action_group.get_action (action)
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:364: DeprecationWarning: Gtk.UIManager.ensure_update is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: self.ui_manager.ensure_update ()
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:365: DeprecationWarning: Gtk.UIManager.get_accel_group is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: self.PrintersWindow.add_accel_group (self.ui_manager.get_accel_group ())
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:374: DeprecationWarning: Gtk.UIManager.get_action is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: action = self.ui_manager.get_action ("/new-printer")
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:375: DeprecationWarning: Gtk.Action.create_menu_item is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: newprinteritem = action.create_menu_item ()
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:673: DeprecationWarning: Gtk.Action.get_proxies is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: for widget in action.get_proxies ():
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:986: DeprecationWarning: urllib.parse.splittype() is deprecated as of 3.8, use urllib.parse.urlparse() instead
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: (scheme, rest) = urllib.parse.splittype (object.device_uri)
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:2246: DeprecationWarning: Gdk.threads_enter is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: Gdk.threads_enter ()
Mar 30 19:08:12 sid dbus-daemon[937]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.113' (uid=1000 pid=6366 comm="/usr/bin/python3 /usr/share/system-config-printer/")
Mar 30 19:08:12 sid systemd[1]: Starting Hostname Service...
Mar 30 19:08:12 sid dbus-daemon[937]: [system] Successfully activated service 'org.freedesktop.hostname1'
Mar 30 19:08:12 sid systemd[1]: Started Hostname Service.
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:2197: DeprecationWarning: Gdk.threads_leave is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: Gdk.threads_leave ()
Mar 30 19:08:15 sid /usr/libexec/gdm-x-session[2732]: Avertissement du gestionnaire de fenêtres : Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1c00007 (S'authenti)
Mar 30 19:08:15 sid /usr/libexec/gdm-x-session[2732]: Avertissement du gestionnaire de fenêtres : meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
Mar 30 19:08:16 sid /usr/libexec/gdm-x-session[6440]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:16 sid /usr/libexec/gdm-x-session[6440]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:23 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:711: DeprecationWarning: Gtk.Menu.popup_for_device is deprecated
Mar 30 19:08:23 sid /usr/libexec/gdm-x-session[6366]: self.printer_context_menu.popup_for_device (None, None, None, None,
Mar 30 19:08:26 sid /usr/libexec/gdm-x-session[6484]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:26 sid /usr/libexec/gdm-x-session[6484]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:33 sid dbus-daemon[2117]: [session uid=1000 pid=2117] Activating service name='org.fedoraproject.Config.Printing' requested by ':1.65' (uid=1000 pid=2833 comm="/usr/bin/python3 /usr/share/system-config-printer/")
Mar 30 19:08:33 sid dbus-daemon[937]: [system] Activating service name='org.opensuse.CupsPkHelper.Mechanism' requested by ':1.114' (uid=1000 pid=6366 comm="/usr/bin/python3 /usr/share/system-config-printer/") (using servicehelper)
Mar 30 19:08:33 sid dbus-daemon[937]: [system] Successfully activated service 'org.opensuse.CupsPkHelper.Mechanism'
Mar 30 19:08:33 sid dbus-daemon[2117]: [session uid=1000 pid=2117] Successfully activated service 'org.fedoraproject.Config.Printing'
Mar 30 19:08:33 sid org.fedoraproject.Config.Printing[6538]: /usr/share/system-config-printer/scp-dbus-service.py:602: DeprecationWarning: Gdk.threads_enter is deprecated
Mar 30 19:08:33 sid org.fedoraproject.Config.Printing[6538]: Gdk.threads_enter ()
Mar 30 19:08:33 sid scp-dbus-servic[6538]: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
Mar 30 19:08:36 sid /usr/libexec/gdm-x-session[6557]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:36 sid /usr/libexec/gdm-x-session[6557]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:46 sid /usr/libexec/gdm-x-session[6598]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:46 sid /usr/libexec/gdm-x-session[6598]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:56 sid /usr/libexec/gdm-x-session[6654]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:56 sid /usr/libexec/gdm-x-session[6654]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:01 sid systemd[1]: Starting Clean php session files...
Mar 30 19:09:01 sid systemd[1]: systemd-hostnamed.service: Deactivated successfully.
Mar 30 19:09:01 sid systemd[1]: phpsessionclean.service: Deactivated successfully.
Mar 30 19:09:01 sid systemd[1]: Finished Clean php session files.
Mar 30 19:09:01 sid CRON[6786]: (root) CMD ( [ -x /usr/lib/php/sessionclean ] && if [ ! -d /run/systemd/system ]; then /usr/lib/php/sessionclean; fi)
Mar 30 19:09:06 sid /usr/libexec/gdm-x-session[6790]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:06 sid /usr/libexec/gdm-x-session[6790]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:16 sid /usr/libexec/gdm-x-session[6830]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:16 sid /usr/libexec/gdm-x-session[6830]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:26 sid /usr/libexec/gdm-x-session[6872]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:26 sid /usr/libexec/gdm-x-session[6872]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:36 sid /usr/libexec/gdm-x-session[6913]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:36 sid /usr/libexec/gdm-x-session[6913]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:46 sid /usr/libexec/gdm-x-session[6956]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:46 sid /usr/libexec/gdm-x-session[6956]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:56 sid /usr/libexec/gdm-x-session[7014]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:56 sid /usr/libexec/gdm-x-session[7014]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:56 sid /usr/libexec/gdm-x-session[3024]: [2022-03-30 19:09:56.752] [234] (audio_device_pulse_linux.cc:1861): Can't query latency
Mar 30 19:10:06 sid /usr/libexec/gdm-x-session[7074]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:06 sid /usr/libexec/gdm-x-session[7074]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:16 sid /usr/libexec/gdm-x-session[7116]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:16 sid /usr/libexec/gdm-x-session[7116]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:26 sid /usr/libexec/gdm-x-session[7180]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:26 sid /usr/libexec/gdm-x-session[7180]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:36 sid /usr/libexec/gdm-x-session[7197]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:36 sid /usr/libexec/gdm-x-session[7197]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:46 sid /usr/libexec/gdm-x-session[7241]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:46 sid /usr/libexec/gdm-x-session[7241]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:56 sid /usr/libexec/gdm-x-session[7289]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:56 sid /usr/libexec/gdm-x-session[7289]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:06 sid /usr/libexec/gdm-x-session[7365]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:06 sid /usr/libexec/gdm-x-session[7365]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:16 sid /usr/libexec/gdm-x-session[7411]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:16 sid /usr/libexec/gdm-x-session[7411]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:16 sid systemd[1]: Starting Hourly check for daily apt-listbugs preferences cleanup...
Mar 30 19:11:16 sid systemd[1]: apt-listbugs.service: Deactivated successfully.
Mar 30 19:11:16 sid systemd[1]: Finished Hourly check for daily apt-listbugs preferences cleanup.
Mar 30 19:11:26 sid /usr/libexec/gdm-x-session[7462]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:26 sid /usr/libexec/gdm-x-session[7462]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:36 sid /usr/libexec/gdm-x-session[7513]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:36 sid /usr/libexec/gdm-x-session[7513]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:46 sid /usr/libexec/gdm-x-session[7552]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:46 sid /usr/libexec/gdm-x-session[7552]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:56 sid /usr/libexec/gdm-x-session[7601]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:56 sid /usr/libexec/gdm-x-session[7601]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:06 sid /usr/libexec/gdm-x-session[7665]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:06 sid /usr/libexec/gdm-x-session[7665]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:16 sid /usr/libexec/gdm-x-session[7716]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:16 sid /usr/libexec/gdm-x-session[7716]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:21 sid mate-terminal[7738]: Failed to parse translated string 'Terminal' for key 'title' in schema 'org.mate.terminal.profile': 0:expected value
Mar 30 19:12:21 sid mate-terminal[7738]: Using untranslated default instead.
Mar 30 19:12:21 sid mate-terminal[7738]: Failed to parse translated string '[UTF-8,current,ISO-8859-15,ISO-8859-1]' for key 'active-encodings' in schema 'org.mate.terminal.global': 1:expected value
Mar 30 19:12:21 sid mate-terminal[7738]: Using untranslated default instead.
Mar 30 19:12:26 sid /usr/libexec/gdm-x-session[7783]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:26 sid /usr/libexec/gdm-x-session[7783]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:36 sid /usr/libexec/gdm-x-session[7829]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:36 sid /usr/libexec/gdm-x-session[7829]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:46 sid /usr/libexec/gdm-x-session[7872]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:46 sid /usr/libexec/gdm-x-session[7872]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:56 sid /usr/libexec/gdm-x-session[7926]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:56 sid /usr/libexec/gdm-x-session[7926]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
sudo tail -n 200 /var/log/kern.log
Mar 30 19:00:38 sid kernel: [ 3.277797] sda: sda1
Mar 30 19:00:38 sid kernel: [ 3.304364] sd 5:0:0:0: [sda] Attached SCSI disk
Mar 30 19:00:38 sid kernel: [ 3.388834] [drm] reserve 0xa00000 from 0x83fe000000 for PSP TMR
Mar 30 19:00:38 sid kernel: [ 3.506714] amdgpu 0000:0a:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
Mar 30 19:00:38 sid kernel: [ 3.506738] amdgpu 0000:0a:00.0: amdgpu: use vbios provided pptable
Mar 30 19:00:38 sid kernel: [ 3.580967] amdgpu 0000:0a:00.0: amdgpu: SMU is initialized successfully!
Mar 30 19:00:38 sid kernel: [ 3.581165] [drm] Display Core initialized with v3.2.160!
Mar 30 19:00:38 sid kernel: [ 3.582910] [drm] DMUB hardware initialized: version=0x02020003
Mar 30 19:00:38 sid kernel: [ 3.818941] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:479
Mar 30 19:00:38 sid kernel: [ 4.227940] [drm] kiq ring mec 2 pipe 1 q 0
Mar 30 19:00:38 sid kernel: [ 4.233455] [drm] VCN decode and encode initialized successfully(under DPG Mode).
Mar 30 19:00:38 sid kernel: [ 4.233977] [drm] JPEG decode initialized successfully.
Mar 30 19:00:38 sid kernel: [ 4.235031] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
Mar 30 19:00:38 sid kernel: [ 4.235299] amdgpu: SRAT table not found
Mar 30 19:00:38 sid kernel: [ 4.235299] amdgpu: Virtual CRAT table created for GPU
Mar 30 19:00:38 sid kernel: [ 4.235400] amdgpu: Topology: Add dGPU node [0x73bf:0x1002]
Mar 30 19:00:38 sid kernel: [ 4.235401] kfd kfd: amdgpu: added device 1002:73bf
Mar 30 19:00:38 sid kernel: [ 4.235421] amdgpu 0000:0a:00.0: amdgpu: SE 4, SH per SE 2, CU per SH 10, active_cu_number 60
Mar 30 19:00:38 sid kernel: [ 4.241188] [drm] fb mappable at 0xD0685000
Mar 30 19:00:38 sid kernel: [ 4.241189] [drm] vram apper at 0xD0000000
Mar 30 19:00:38 sid kernel: [ 4.241190] [drm] size 33177600
Mar 30 19:00:38 sid kernel: [ 4.241190] [drm] fb depth is 24
Mar 30 19:00:38 sid kernel: [ 4.241191] [drm] pitch is 15360
Mar 30 19:00:38 sid kernel: [ 4.241224] fbcon: amdgpudrmfb (fb0) is primary device
Mar 30 19:00:38 sid kernel: [ 4.477576] [drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc line:479
Mar 30 19:00:38 sid kernel: [ 4.683194] Console: switching to colour frame buffer device 240x67
Mar 30 19:00:38 sid kernel: [ 4.711958] amdgpu 0000:0a:00.0: [drm] fb0: amdgpudrmfb frame buffer device
Mar 30 19:00:38 sid kernel: [ 4.724341] amdgpu 0000:0a:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724344] amdgpu 0000:0a:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724345] amdgpu 0000:0a:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724346] amdgpu 0000:0a:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724347] amdgpu 0000:0a:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724347] amdgpu 0000:0a:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724348] amdgpu 0000:0a:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724349] amdgpu 0000:0a:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724350] amdgpu 0000:0a:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724351] amdgpu 0000:0a:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724352] amdgpu 0000:0a:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724353] amdgpu 0000:0a:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724354] amdgpu 0000:0a:00.0: amdgpu: ring sdma2 uses VM inv eng 14 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724354] amdgpu 0000:0a:00.0: amdgpu: ring sdma3 uses VM inv eng 15 on hub 0
Mar 30 19:00:38 sid kernel: [ 4.724355] amdgpu 0000:0a:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1
Mar 30 19:00:38 sid kernel: [ 4.724356] amdgpu 0000:0a:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1
Mar 30 19:00:38 sid kernel: [ 4.724357] amdgpu 0000:0a:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1
Mar 30 19:00:38 sid kernel: [ 4.724358] amdgpu 0000:0a:00.0: amdgpu: ring vcn_dec_1 uses VM inv eng 5 on hub 1
Mar 30 19:00:38 sid kernel: [ 4.724359] amdgpu 0000:0a:00.0: amdgpu: ring vcn_enc_1.0 uses VM inv eng 6 on hub 1
Mar 30 19:00:38 sid kernel: [ 4.724359] amdgpu 0000:0a:00.0: amdgpu: ring vcn_enc_1.1 uses VM inv eng 7 on hub 1
Mar 30 19:00:38 sid kernel: [ 4.724360] amdgpu 0000:0a:00.0: amdgpu: ring jpeg_dec uses VM inv eng 8 on hub 1
Mar 30 19:00:38 sid kernel: [ 4.725396] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:0a:00.0 on minor 0
Mar 30 19:00:38 sid kernel: [ 4.828292] raid6: avx2x4 gen() 39833 MB/s
Mar 30 19:00:38 sid kernel: [ 4.896655] raid6: avx2x4 xor() 11985 MB/s
Mar 30 19:00:38 sid kernel: [ 4.964293] raid6: avx2x2 gen() 41597 MB/s
Mar 30 19:00:38 sid kernel: [ 5.032630] raid6: avx2x2 xor() 26014 MB/s
Mar 30 19:00:38 sid kernel: [ 5.100291] raid6: avx2x1 gen() 34729 MB/s
Mar 30 19:00:38 sid kernel: [ 5.168630] raid6: avx2x1 xor() 20629 MB/s
Mar 30 19:00:38 sid kernel: [ 5.236290] raid6: sse2x4 gen() 19669 MB/s
Mar 30 19:00:38 sid kernel: [ 5.304593] raid6: sse2x4 xor() 9204 MB/s
Mar 30 19:00:38 sid kernel: [ 5.372291] raid6: sse2x2 gen() 21431 MB/s
Mar 30 19:00:38 sid kernel: [ 5.440698] raid6: sse2x2 xor() 13403 MB/s
Mar 30 19:00:38 sid kernel: [ 5.508292] raid6: sse2x1 gen() 16979 MB/s
Mar 30 19:00:38 sid kernel: [ 5.576681] raid6: sse2x1 xor() 10629 MB/s
Mar 30 19:00:38 sid kernel: [ 5.576682] raid6: using algorithm avx2x2 gen() 41597 MB/s
Mar 30 19:00:38 sid kernel: [ 5.576683] raid6: .... xor() 26014 MB/s, rmw enabled
Mar 30 19:00:38 sid kernel: [ 5.576683] raid6: using avx2x2 recovery algorithm
Mar 30 19:00:38 sid kernel: [ 5.577310] xor: automatically using best checksumming function avx
Mar 30 19:00:38 sid kernel: [ 5.577689] async_tx: api initialized (async)
Mar 30 19:00:38 sid kernel: [ 5.697103] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
Mar 30 19:00:38 sid kernel: [ 5.847473] PM: Image not found (code -22)
Mar 30 19:00:38 sid kernel: [ 5.924250] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
Mar 30 19:00:38 sid kernel: [ 5.957731] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
Mar 30 19:00:38 sid kernel: [ 6.195432] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
Mar 30 19:00:38 sid kernel: [ 6.195579] fuse: init (API version 7.35)
Mar 30 19:00:38 sid kernel: [ 6.202249] lp: driver loaded but no devices found
Mar 30 19:00:38 sid kernel: [ 6.204650] ppdev: user-space parallel port driver
Mar 30 19:00:38 sid kernel: [ 6.213145] IPMI message handler: version 39.2
Mar 30 19:00:38 sid kernel: [ 6.213994] ipmi device interface
Mar 30 19:00:38 sid kernel: [ 6.240840] i2c i2c-3: adapter quirk: no zero length (addr 0x0018, size 0, write)
Mar 30 19:00:38 sid kernel: [ 6.240964] i2c i2c-3: adapter quirk: no zero length (addr 0x0019, size 0, write)
Mar 30 19:00:38 sid kernel: [ 6.241025] i2c i2c-3: adapter quirk: no zero length (addr 0x001a, size 0, write)
Mar 30 19:00:38 sid kernel: [ 6.241087] i2c i2c-3: adapter quirk: no zero length (addr 0x001b, size 0, write)
Mar 30 19:00:38 sid kernel: [ 6.241149] i2c i2c-3: adapter quirk: no zero length (addr 0x001c, size 0, write)
Mar 30 19:00:38 sid kernel: [ 6.241210] i2c i2c-3: adapter quirk: no zero length (addr 0x001d, size 0, write)
Mar 30 19:00:38 sid kernel: [ 6.241275] i2c i2c-3: adapter quirk: no zero length (addr 0x001e, size 0, write)
Mar 30 19:00:38 sid kernel: [ 6.241336] i2c i2c-3: adapter quirk: no zero length (addr 0x001f, size 0, write)
Mar 30 19:00:38 sid kernel: [ 6.244780] nct6775: Using Asus WMI to access 0xc1 chip.
Mar 30 19:00:38 sid kernel: [ 6.244811] nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
Mar 30 19:00:38 sid kernel: [ 6.269594] acpi_cpufreq: overriding BIOS provided _PSD data
Mar 30 19:00:38 sid kernel: [ 6.296048] sd 5:0:0:0: Attached scsi generic sg0 type 0
Mar 30 19:00:38 sid kernel: [ 6.296086] sd 6:0:0:0: Attached scsi generic sg1 type 0
Mar 30 19:00:38 sid kernel: [ 6.301754] ccp 0000:0c:00.1: enabling device (0000 -> 0002)
Mar 30 19:00:38 sid kernel: [ 6.302121] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
Mar 30 19:00:38 sid kernel: [ 6.302427] ccp 0000:0c:00.1: ccp: unable to access the device: you might be running a broken BIOS.
Mar 30 19:00:38 sid kernel: [ 6.303032] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
Mar 30 19:00:38 sid kernel: [ 6.304704] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
Mar 30 19:00:38 sid kernel: [ 6.306338] mc: Linux media interface: v0.10
Mar 30 19:00:38 sid kernel: [ 6.306447] input: PC Speaker as /devices/platform/pcspkr/input/input10
Mar 30 19:00:38 sid kernel: [ 6.310417] pstore: Using crash dump compression: deflate
Mar 30 19:00:38 sid kernel: [ 6.310421] pstore: Registered efi as persistent store backend
Mar 30 19:00:38 sid kernel: [ 6.314608] Adding 33791996k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:33791996k SSFS
Mar 30 19:00:38 sid kernel: [ 6.345960] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
Mar 30 19:00:38 sid kernel: [ 6.348671] videodev: Linux video capture interface: v2.00
Mar 30 19:00:38 sid kernel: [ 6.353522] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
Mar 30 19:00:38 sid kernel: [ 6.353524] RAPL PMU: hw unit of domain package 2^-16 Joules
Mar 30 19:00:38 sid kernel: [ 6.356317] asus_wmi: ASUS WMI generic driver loaded
Mar 30 19:00:38 sid kernel: [ 6.356377] cryptd: max_cpu_qlen set to 1000
Mar 30 19:00:38 sid kernel: [ 6.357297] asus_wmi: Initialization: 0x0
Mar 30 19:00:38 sid kernel: [ 6.357322] asus_wmi: BIOS WMI version: 0.9
Mar 30 19:00:38 sid kernel: [ 6.357417] asus_wmi: SFUN value: 0x0
Mar 30 19:00:38 sid kernel: [ 6.357419] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
Mar 30 19:00:38 sid kernel: [ 6.357862] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
Mar 30 19:00:38 sid kernel: [ 6.366496] AVX2 version of gcm_enc/dec engaged.
Mar 30 19:00:38 sid kernel: [ 6.366577] AES CTR mode by8 optimization enabled
Mar 30 19:00:38 sid kernel: [ 6.368105] usb 5-2: Found UVC 1.00 device HP Webcam HD 4310 (03f0:e807)
Mar 30 19:00:38 sid kernel: [ 6.370376] snd_hda_intel 0000:0a:00.1: enabling device (0000 -> 0002)
Mar 30 19:00:38 sid kernel: [ 6.370440] snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
Mar 30 19:00:38 sid kernel: [ 6.370442] snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
Mar 30 19:00:38 sid kernel: [ 6.370469] snd_hda_intel 0000:0c:00.4: enabling device (0000 -> 0002)
Mar 30 19:00:38 sid kernel: [ 6.378266] snd_hda_intel 0000:0a:00.1: bound 0000:0a:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
Mar 30 19:00:38 sid kernel: [ 6.379325] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input12
Mar 30 19:00:38 sid kernel: [ 6.379387] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input13
Mar 30 19:00:38 sid kernel: [ 6.379433] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input14
Mar 30 19:00:38 sid kernel: [ 6.379482] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input15
Mar 30 19:00:38 sid kernel: [ 6.380361] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input16
Mar 30 19:00:38 sid kernel: [ 6.380404] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.1/sound/card0/input17
Mar 30 19:00:38 sid kernel: [ 6.403870] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
Mar 30 19:00:38 sid kernel: [ 6.403875] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Mar 30 19:00:38 sid kernel: [ 6.403877] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Mar 30 19:00:38 sid kernel: [ 6.403879] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
Mar 30 19:00:38 sid kernel: [ 6.403880] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
Mar 30 19:00:38 sid kernel: [ 6.403881] snd_hda_codec_realtek hdaudioC2D0: inputs:
Mar 30 19:00:38 sid kernel: [ 6.403883] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
Mar 30 19:00:38 sid kernel: [ 6.403884] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
Mar 30 19:00:38 sid kernel: [ 6.403885] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
Mar 30 19:00:38 sid kernel: [ 6.405294] input: HP Webcam HD 4310: HP Webcam HD as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-2/5-2:1.0/input/input18
Mar 30 19:00:38 sid kernel: [ 6.405344] usbcore: registered new interface driver uvcvideo
Mar 30 19:00:38 sid kernel: [ 6.441085] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card2/input19
Mar 30 19:00:38 sid kernel: [ 6.441125] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card2/input20
Mar 30 19:00:38 sid kernel: [ 6.441159] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card2/input21
Mar 30 19:00:38 sid kernel: [ 6.441186] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card2/input22
Mar 30 19:00:38 sid kernel: [ 6.441215] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card2/input23
Mar 30 19:00:38 sid kernel: [ 6.441241] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card2/input24
Mar 30 19:00:38 sid kernel: [ 6.441277] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card2/input25
Mar 30 19:00:38 sid kernel: [ 6.441323] snd_hda_intel 0000:0c:00.4: device 1043:8733 is on the power_save denylist, forcing power_save to 0
Mar 30 19:00:38 sid kernel: [ 6.469361] SVM: TSC scaling supported
Mar 30 19:00:38 sid kernel: [ 6.469364] kvm: Nested Virtualization enabled
Mar 30 19:00:38 sid kernel: [ 6.469364] SVM: kvm: Nested Paging enabled
Mar 30 19:00:38 sid kernel: [ 6.469365] SEV supported: 509 ASIDs
Mar 30 19:00:38 sid kernel: [ 6.469384] SVM: Virtual VMLOAD VMSAVE supported
Mar 30 19:00:38 sid kernel: [ 6.469385] SVM: Virtual GIF supported
Mar 30 19:00:38 sid kernel: [ 6.469385] SVM: LBR virtualization supported
Mar 30 19:00:38 sid kernel: [ 6.493867] MCE: In-kernel MCE decoding enabled.
Mar 30 19:00:38 sid kernel: [ 6.518075] usb 5-2: current rate 48000 is different from the runtime rate 8000
Mar 30 19:00:38 sid kernel: [ 6.563951] usb 5-2: current rate 48000 is different from the runtime rate 16000
Mar 30 19:00:38 sid kernel: [ 6.627828] usb 5-2: current rate 48000 is different from the runtime rate 44100
Mar 30 19:00:38 sid kernel: [ 6.631447] intel_rapl_common: Found RAPL domain package
Mar 30 19:00:38 sid kernel: [ 6.631449] intel_rapl_common: Found RAPL domain core
Mar 30 19:00:38 sid kernel: [ 6.760960] usbcore: registered new interface driver snd-usb-audio
Mar 30 19:00:38 sid kernel: [ 7.212029] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
Mar 30 19:00:38 sid kernel: [ 7.312807] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
Mar 30 19:00:38 sid kernel: [ 7.335664] audit: type=1400 audit(1648659638.290:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=923 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.335745] audit: type=1400 audit(1648659638.290:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=921 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.336254] audit: type=1400 audit(1648659638.290:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=913 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.336283] audit: type=1400 audit(1648659638.290:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=920 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.336315] audit: type=1400 audit(1648659638.294:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/libexec/ibus-engine-hangul" pid=924 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.336475] audit: type=1400 audit(1648659638.294:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=914 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.336478] audit: type=1400 audit(1648659638.294:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=914 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.336769] audit: type=1400 audit(1648659638.294:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=917 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.336771] audit: type=1400 audit(1648659638.294:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=917 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.336773] audit: type=1400 audit(1648659638.294:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=917 comm="apparmor_parser"
Mar 30 19:00:38 sid kernel: [ 7.533472] NET: Registered PF_QIPCRTR protocol family
Mar 30 19:00:38 sid kernel: [ 8.024995] input: ckb2: Corsair Gaming M65 Pro RGB Mouse vKB as /devices/virtual/input/input26
Mar 30 19:00:38 sid kernel: [ 8.025003] input: ckb1: Corsair Gaming K55 RGB Keyboard vKB as /devices/virtual/input/input27
Mar 30 19:00:38 sid kernel: [ 8.025097] input: ckb2: Corsair Gaming M65 Pro RGB Mouse vM as /devices/virtual/input/input28
Mar 30 19:00:38 sid kernel: [ 8.025166] input: ckb1: Corsair Gaming K55 RGB Keyboard vM as /devices/virtual/input/input29
Mar 30 19:00:40 sid kernel: [ 9.225645] rfkill: input handler disabled
Mar 30 19:00:41 sid kernel: [ 10.548841] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Mar 30 19:00:41 sid kernel: [ 10.549159] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
Mar 30 19:00:45 sid kernel: [ 14.813673] kauditd_printk_skb: 18 callbacks suppressed
Mar 30 19:00:45 sid kernel: [ 14.813676] audit: type=1400 audit(1648659645.770:30): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1812 comm="cups-browsed" capability=23 capname="sys_nice"
Mar 30 19:00:55 sid kernel: [ 24.806701] rfkill: input handler enabled
Mar 30 19:00:56 sid kernel: [ 25.934519] traps: light-locker[2831] trap int3 ip:7fe550a6131f sp:7fff602b21d0 error:0 in libglib-2.0.so.0.7200.0[7fe550a23000+8c000]
Mar 30 19:07:46 sid kernel: [ 435.343728] usb 5-1: new high-speed USB device number 5 using xhci_hcd
Mar 30 19:07:46 sid kernel: [ 435.498174] usb 5-1: New USB device found, idVendor=03f0, idProduct=c311, bcdDevice= 1.00
Mar 30 19:07:46 sid kernel: [ 435.498180] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 30 19:07:46 sid kernel: [ 435.498182] usb 5-1: Product: ENVY 5530 series
Mar 30 19:07:46 sid kernel: [ 435.498184] usb 5-1: Manufacturer: HP
Mar 30 19:07:46 sid kernel: [ 435.498186] usb 5-1: SerialNumber: CN595530XD06BX
Mar 30 19:07:46 sid kernel: [ 435.568084] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:07:46 sid kernel: [ 435.568102] usbcore: registered new interface driver usblp
Mar 30 19:07:46 sid kernel: [ 435.569178] usb-storage 5-1:1.2: USB Mass Storage device detected
Mar 30 19:07:46 sid kernel: [ 435.569271] scsi host7: usb-storage 5-1:1.2
Mar 30 19:07:46 sid kernel: [ 435.569317] usbcore: registered new interface driver usb-storage
Mar 30 19:07:46 sid kernel: [ 435.570754] usbcore: registered new interface driver uas
Mar 30 19:07:46 sid kernel: [ 435.588622] usblp3: removed
Mar 30 19:07:52 sid kernel: [ 441.282018] usb 5-1: reset high-speed USB device number 5 using xhci_hcd
Mar 30 19:07:52 sid kernel: [ 441.442872] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:07:54 sid kernel: [ 443.588097] usblp3: removed
Mar 30 19:08:00 sid kernel: [ 449.250022] usb 5-1: reset high-speed USB device number 5 using xhci_hcd
Mar 30 19:08:00 sid kernel: [ 449.410744] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:08:02 sid kernel: [ 451.588848] usblp3: removed
sudo tail -n 200 /var/log/messages
Mar 30 19:07:36 sid /usr/libexec/gdm-x-session[3024]: [2022-03-30 19:07:36.567] [234] (audio_device_pulse_linux.cc:1861): Can't query latency
Mar 30 19:07:46 sid /usr/libexec/gdm-x-session[6170]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:07:46 sid /usr/libexec/gdm-x-session[6170]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:07:46 sid kernel: [ 435.343728] usb 5-1: new high-speed USB device number 5 using xhci_hcd
Mar 30 19:07:46 sid kernel: [ 435.498174] usb 5-1: New USB device found, idVendor=03f0, idProduct=c311, bcdDevice= 1.00
Mar 30 19:07:46 sid kernel: [ 435.498180] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 30 19:07:46 sid kernel: [ 435.498182] usb 5-1: Product: ENVY 5530 series
Mar 30 19:07:46 sid kernel: [ 435.498184] usb 5-1: Manufacturer: HP
Mar 30 19:07:46 sid kernel: [ 435.498186] usb 5-1: SerialNumber: CN595530XD06BX
Mar 30 19:07:46 sid root: loading HP Device 005 005
Mar 30 19:07:46 sid kernel: [ 435.568084] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:07:46 sid kernel: [ 435.568102] usbcore: registered new interface driver usblp
Mar 30 19:07:46 sid kernel: [ 435.569178] usb-storage 5-1:1.2: USB Mass Storage device detected
Mar 30 19:07:46 sid kernel: [ 435.569271] scsi host7: usb-storage 5-1:1.2
Mar 30 19:07:46 sid kernel: [ 435.569317] usbcore: registered new interface driver usb-storage
Mar 30 19:07:46 sid kernel: [ 435.570754] usbcore: registered new interface driver uas
Mar 30 19:07:46 sid kernel: [ 435.588622] usblp3: removed
Mar 30 19:07:52 sid kernel: [ 441.282018] usb 5-1: reset high-speed USB device number 5 using xhci_hcd
Mar 30 19:07:52 sid kernel: [ 441.442872] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:07:54 sid kernel: [ 443.588097] usblp3: removed
Mar 30 19:07:56 sid /usr/libexec/gdm-x-session[6262]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:07:56 sid /usr/libexec/gdm-x-session[6262]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:00 sid kernel: [ 449.250022] usb 5-1: reset high-speed USB device number 5 using xhci_hcd
Mar 30 19:08:00 sid kernel: [ 449.410744] usblp 5-1:1.1: usblp3: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
Mar 30 19:08:02 sid kernel: [ 451.588848] usblp3: removed
Mar 30 19:08:06 sid /usr/libexec/gdm-x-session[6326]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:06 sid /usr/libexec/gdm-x-session[6326]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:325: DeprecationWarning: Gtk.ActionGroup.list_actions is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: for action in printer_manager_action_group.list_actions ():
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:326: DeprecationWarning: Gtk.Action.set_sensitive is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: action.set_sensitive (False)
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:334: DeprecationWarning: Gtk.ActionGroup.get_action is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: act = printer_manager_action_group.get_action (action)
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:364: DeprecationWarning: Gtk.UIManager.ensure_update is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: self.ui_manager.ensure_update ()
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:365: DeprecationWarning: Gtk.UIManager.get_accel_group is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: self.PrintersWindow.add_accel_group (self.ui_manager.get_accel_group ())
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:374: DeprecationWarning: Gtk.UIManager.get_action is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: action = self.ui_manager.get_action ("/new-printer")
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:375: DeprecationWarning: Gtk.Action.create_menu_item is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: newprinteritem = action.create_menu_item ()
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:673: DeprecationWarning: Gtk.Action.get_proxies is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: for widget in action.get_proxies ():
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:986: DeprecationWarning: urllib.parse.splittype() is deprecated as of 3.8, use urllib.parse.urlparse() instead
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: (scheme, rest) = urllib.parse.splittype (object.device_uri)
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:2246: DeprecationWarning: Gdk.threads_enter is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: Gdk.threads_enter ()
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:2197: DeprecationWarning: Gdk.threads_leave is deprecated
Mar 30 19:08:12 sid /usr/libexec/gdm-x-session[6366]: Gdk.threads_leave ()
Mar 30 19:08:15 sid /usr/libexec/gdm-x-session[2732]: Avertissement du gestionnaire de fenêtres : Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1c00007 (S'authenti)
Mar 30 19:08:15 sid /usr/libexec/gdm-x-session[2732]: Avertissement du gestionnaire de fenêtres : meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
Mar 30 19:08:16 sid /usr/libexec/gdm-x-session[6440]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:16 sid /usr/libexec/gdm-x-session[6440]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:23 sid /usr/libexec/gdm-x-session[6366]: /usr/share/system-config-printer/system-config-printer.py:711: DeprecationWarning: Gtk.Menu.popup_for_device is deprecated
Mar 30 19:08:23 sid /usr/libexec/gdm-x-session[6366]: self.printer_context_menu.popup_for_device (None, None, None, None,
Mar 30 19:08:26 sid /usr/libexec/gdm-x-session[6484]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:26 sid /usr/libexec/gdm-x-session[6484]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:33 sid org.fedoraproject.Config.Printing[6538]: /usr/share/system-config-printer/scp-dbus-service.py:602: DeprecationWarning: Gdk.threads_enter is deprecated
Mar 30 19:08:33 sid org.fedoraproject.Config.Printing[6538]: Gdk.threads_enter ()
Mar 30 19:08:33 sid scp-dbus-servic[6538]: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
Mar 30 19:08:36 sid /usr/libexec/gdm-x-session[6557]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:36 sid /usr/libexec/gdm-x-session[6557]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:46 sid /usr/libexec/gdm-x-session[6598]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:46 sid /usr/libexec/gdm-x-session[6598]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:08:56 sid /usr/libexec/gdm-x-session[6654]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:08:56 sid /usr/libexec/gdm-x-session[6654]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:06 sid /usr/libexec/gdm-x-session[6790]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:06 sid /usr/libexec/gdm-x-session[6790]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:16 sid /usr/libexec/gdm-x-session[6830]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:16 sid /usr/libexec/gdm-x-session[6830]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:26 sid /usr/libexec/gdm-x-session[6872]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:26 sid /usr/libexec/gdm-x-session[6872]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:36 sid /usr/libexec/gdm-x-session[6913]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:36 sid /usr/libexec/gdm-x-session[6913]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:46 sid /usr/libexec/gdm-x-session[6956]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:46 sid /usr/libexec/gdm-x-session[6956]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:56 sid /usr/libexec/gdm-x-session[7014]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:09:56 sid /usr/libexec/gdm-x-session[7014]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:09:56 sid /usr/libexec/gdm-x-session[3024]: [2022-03-30 19:09:56.752] [234] (audio_device_pulse_linux.cc:1861): Can't query latency
Mar 30 19:10:06 sid /usr/libexec/gdm-x-session[7074]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:06 sid /usr/libexec/gdm-x-session[7074]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:16 sid /usr/libexec/gdm-x-session[7116]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:16 sid /usr/libexec/gdm-x-session[7116]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:26 sid /usr/libexec/gdm-x-session[7180]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:26 sid /usr/libexec/gdm-x-session[7180]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:36 sid /usr/libexec/gdm-x-session[7197]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:36 sid /usr/libexec/gdm-x-session[7197]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:46 sid /usr/libexec/gdm-x-session[7241]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:46 sid /usr/libexec/gdm-x-session[7241]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:10:56 sid /usr/libexec/gdm-x-session[7289]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:10:56 sid /usr/libexec/gdm-x-session[7289]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:06 sid /usr/libexec/gdm-x-session[7365]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:06 sid /usr/libexec/gdm-x-session[7365]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:16 sid /usr/libexec/gdm-x-session[7411]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:16 sid /usr/libexec/gdm-x-session[7411]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:26 sid /usr/libexec/gdm-x-session[7462]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:26 sid /usr/libexec/gdm-x-session[7462]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:36 sid /usr/libexec/gdm-x-session[7513]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:36 sid /usr/libexec/gdm-x-session[7513]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:46 sid /usr/libexec/gdm-x-session[7552]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:46 sid /usr/libexec/gdm-x-session[7552]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:11:56 sid /usr/libexec/gdm-x-session[7601]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:11:56 sid /usr/libexec/gdm-x-session[7601]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:06 sid /usr/libexec/gdm-x-session[7665]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:06 sid /usr/libexec/gdm-x-session[7665]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:16 sid /usr/libexec/gdm-x-session[7716]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:16 sid /usr/libexec/gdm-x-session[7716]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:21 sid mate-terminal[7738]: Failed to parse translated string 'Terminal' for key 'title' in schema 'org.mate.terminal.profile': 0:expected value
Mar 30 19:12:21 sid mate-terminal[7738]: Using untranslated default instead.
Mar 30 19:12:21 sid mate-terminal[7738]: Failed to parse translated string '[UTF-8,current,ISO-8859-15,ISO-8859-1]' for key 'active-encodings' in schema 'org.mate.terminal.global': 1:expected value
Mar 30 19:12:21 sid mate-terminal[7738]: Using untranslated default instead.
Mar 30 19:12:26 sid /usr/libexec/gdm-x-session[7783]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:26 sid /usr/libexec/gdm-x-session[7783]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:36 sid /usr/libexec/gdm-x-session[7829]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:36 sid /usr/libexec/gdm-x-session[7829]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:46 sid /usr/libexec/gdm-x-session[7872]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:46 sid /usr/libexec/gdm-x-session[7872]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:12:56 sid /usr/libexec/gdm-x-session[7926]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:12:56 sid /usr/libexec/gdm-x-session[7926]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:13:06 sid /usr/libexec/gdm-x-session[7988]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:13:06 sid /usr/libexec/gdm-x-session[7988]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:13:16 sid /usr/libexec/gdm-x-session[8029]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:13:16 sid /usr/libexec/gdm-x-session[8029]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:13:26 sid /usr/libexec/gdm-x-session[8077]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:13:26 sid /usr/libexec/gdm-x-session[8077]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:13:36 sid /usr/libexec/gdm-x-session[8119]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:13:36 sid /usr/libexec/gdm-x-session[8119]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:13:46 sid /usr/libexec/gdm-x-session[8162]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:13:46 sid /usr/libexec/gdm-x-session[8162]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:13:56 sid /usr/libexec/gdm-x-session[8220]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:13:56 sid /usr/libexec/gdm-x-session[8220]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:14:06 sid /usr/libexec/gdm-x-session[8280]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:14:06 sid /usr/libexec/gdm-x-session[8280]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:14:07 sid /usr/libexec/gdm-x-session[3024]: [2022-03-30 19:14:07.337] [234] (audio_device_pulse_linux.cc:1861): Can't query latency
Mar 30 19:14:16 sid /usr/libexec/gdm-x-session[8322]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:14:16 sid /usr/libexec/gdm-x-session[8322]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:14:26 sid /usr/libexec/gdm-x-session[8364]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:14:26 sid /usr/libexec/gdm-x-session[8364]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:14:36 sid /usr/libexec/gdm-x-session[8407]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:14:36 sid /usr/libexec/gdm-x-session[8407]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:14:46 sid /usr/libexec/gdm-x-session[8448]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:14:46 sid /usr/libexec/gdm-x-session[8448]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:14:56 sid /usr/libexec/gdm-x-session[8493]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:14:56 sid /usr/libexec/gdm-x-session[8493]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:15:06 sid /usr/libexec/gdm-x-session[8569]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:15:06 sid /usr/libexec/gdm-x-session[8569]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:15:16 sid /usr/libexec/gdm-x-session[8610]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:15:16 sid /usr/libexec/gdm-x-session[8610]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:15:26 sid /usr/libexec/gdm-x-session[8654]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:15:26 sid /usr/libexec/gdm-x-session[8654]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:15:36 sid /usr/libexec/gdm-x-session[8693]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:15:36 sid /usr/libexec/gdm-x-session[8693]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:15:46 sid /usr/libexec/gdm-x-session[8734]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:15:46 sid /usr/libexec/gdm-x-session[8734]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:15:56 sid /usr/libexec/gdm-x-session[8826]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:15:56 sid /usr/libexec/gdm-x-session[8826]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:16:01 sid caja[2796]: caja_bookmark_get_location: assertion 'CAJA_IS_BOOKMARK (bookmark)' failed
Mar 30 19:16:01 sid caja[2796]: g_file_get_uri: assertion 'G_IS_FILE (file)' failed
Mar 30 19:16:01 sid caja[2796]: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
Mar 30 19:16:05 sid caja[2796]: caja_bookmark_get_location: assertion 'CAJA_IS_BOOKMARK (bookmark)' failed
Mar 30 19:16:05 sid caja[2796]: g_file_get_uri: assertion 'G_IS_FILE (file)' failed
Mar 30 19:16:05 sid caja[2796]: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
Mar 30 19:16:06 sid /usr/libexec/gdm-x-session[8902]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:16:06 sid /usr/libexec/gdm-x-session[8902]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:16:10 sid caja[2796]: caja_bookmark_get_location: assertion 'CAJA_IS_BOOKMARK (bookmark)' failed
Mar 30 19:16:10 sid caja[2796]: g_file_get_uri: assertion 'G_IS_FILE (file)' failed
Mar 30 19:16:10 sid caja[2796]: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
Mar 30 19:16:16 sid /usr/libexec/gdm-x-session[8963]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:16:16 sid /usr/libexec/gdm-x-session[8963]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:16:26 sid /usr/libexec/gdm-x-session[9006]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:16:26 sid /usr/libexec/gdm-x-session[9006]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:16:36 sid /usr/libexec/gdm-x-session[9048]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:16:36 sid /usr/libexec/gdm-x-session[9048]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:16:46 sid /usr/libexec/gdm-x-session[9090]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:16:46 sid /usr/libexec/gdm-x-session[9090]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:16:51 sid /usr/libexec/gdm-x-session[2235]: (EE) event5 - ckb1: Corsair Gaming K55 RGB Keyboard vKB: client bug: event processing lagging behind by 34ms, your system is too slow
Mar 30 19:16:56 sid /usr/libexec/gdm-x-session[9145]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:16:56 sid /usr/libexec/gdm-x-session[9145]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:17:06 sid /usr/libexec/gdm-x-session[9217]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:17:06 sid /usr/libexec/gdm-x-session[9217]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:17:16 sid /usr/libexec/gdm-x-session[9260]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:17:16 sid /usr/libexec/gdm-x-session[9260]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:17:26 sid /usr/libexec/gdm-x-session[9303]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:17:26 sid /usr/libexec/gdm-x-session[9303]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:17:36 sid /usr/libexec/gdm-x-session[9351]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:17:36 sid /usr/libexec/gdm-x-session[9351]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:17:46 sid /usr/libexec/gdm-x-session[9394]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:17:46 sid /usr/libexec/gdm-x-session[9394]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:17:56 sid /usr/libexec/gdm-x-session[9444]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:17:56 sid /usr/libexec/gdm-x-session[9444]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:18:06 sid /usr/libexec/gdm-x-session[9511]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:18:06 sid /usr/libexec/gdm-x-session[9511]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:18:16 sid /usr/libexec/gdm-x-session[9554]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:18:16 sid /usr/libexec/gdm-x-session[9554]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:18:26 sid /usr/libexec/gdm-x-session[9596]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:18:26 sid /usr/libexec/gdm-x-session[9596]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:18:36 sid /usr/libexec/gdm-x-session[9642]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:18:36 sid /usr/libexec/gdm-x-session[9642]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
Mar 30 19:18:46 sid /usr/libexec/gdm-x-session[9684]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 22: [: -ge: unexpected operator
Mar 30 19:18:46 sid /usr/libexec/gdm-x-session[9684]: /home/alain/Téléchargements/scripts conky/show_gpu_power.sh: 31: [: -ge: unexpected operator
le script qui pose problème :
#!/bin/sh
# Get temperature value
SENSOR_PROBE='amdgpu-pci-0a00'
TEMP_STRING=$(sensors "$SENSOR_PROBE" | grep slowPPT |grep --only-matching '[0-9.]\+ W' | head --lines=1)
TEMP_NUMBER=${TEMP_STRING%.*}
# Set display mode based on arguments
# Default is to display temperature in a console
unset DISPLAY_MODE
if [ $# -eq 1 ]; then
case "$1" in
('conky'|'shell')
DISPLAY_MODE="$1"
;;
esac
fi
: "${DISPLAY_MODE:=shell}"
# Set display color based on temperature value
# ≥ 70°C is high, ≥ 80°C is critical
if [ $TEMP_NUMBER -ge 200 ]; then
case "$DISPLAY_MODE" in
('conky')
COLOR='red'
;;
('shell')
COLOR=31
;;
esac
elif [ $TEMP_NUMBER -ge 40 ]; then
case "$DISPLAY_MODE" in
('conky')
COLOR='yellow'
;;
('shell')
COLOR=33
;;
esac
else
case "$DISPLAY_MODE" in
('conky')
COLOR='green'
;;
('shell')
COLOR=32
;;
esac
fi
# Set message syntax based on display mode
case "$DISPLAY_MODE" in
('conky')
MESSAGE='${color %s}%s${color}'
;;
('shell')
MESSAGE='\033[1;%sm%s\033[0m\n'
;;
esac
# Print the formatted message
printf "$MESSAGE" "$COLOR" "C.G. : puissance consommée : $TEMP_STRING"
exit 0
Dernière modification par Debian Alain (30-03-2022 18:35:14)
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
