Double écran non détecté

madiwas · 15-03-2023 22:24:20

Bonjour,

J'utilise Debian 11.6 avec les dépôts bullseye main non-free contrib et je n'ai pas de signal sur mon second écran, que je passe par ma station d'accueil, ou en direct avec du HDMI ou VGA

Voici le résultat de la commande lspci :

et de arandr :

arandr 

 

(arandr:5360): Gdk-CRITICAL **: 22:17:59.647: gdk_atom_intern: assertion 'atom_name != NULL' failed

(arandr:5360): Gdk-CRITICAL **: 22:17:59.647: gdk_atom_intern: assertion 'atom_name != NULL' failed

Je suis en double-boot avec un Windows, lequel fonctionne bien avec le double écran, pouvez-vous me porter assistance sur ce phénomène ?

Amicalement,

Madiwas
PS mon PC est un ThinkPad P51

lspci

 

00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)

01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 05)

02.0 VGA compatible controller: Intel Corporation HD Graphics P630 (rev 04)

08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model

14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)

14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)

15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)

16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)

1b.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 (rev f1)

1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1)

1c.2 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 (rev f1)

1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)

1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)

1d.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #13 (rev f1)

1f.0 ISA bridge: Intel Corporation CM238 Chipset LPC/eSPI Controller (rev 31)

1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)

1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)

1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)

1f.6 Ethernet controller: Intel Corporation Ethernet Connection (5) I219-LM (rev 31)

00.0 3D controller: NVIDIA Corporation GM206GLM [Quadro M2200 Mobile] (rev a1)

00.1 Audio device: NVIDIA Corporation GM206 High Definition Audio Controller (rev a1)

00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. Device 5017 (rev 03)

00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)

3e:00.0 Non-Volatile memory controller: Lenovo Device 0004

3f:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)

Dernière modification par madiwas (26-03-2023 11:48:34)

mister_g · 23-03-2023 16:48:57

bonjour,

que donne la commande xrandr ?

madiwas · 24-03-2023 09:13:54

Bonjour Mister G

Dans le terminal, j'ai juste tapé xrandr sans argument, il m'ouvre l'interface graphique, j'ai juste copié le contenu du terminal que j'ai reporté ci-dessus

mister_g · 24-03-2023 09:42:42

dans ton exemple tu as tapé arandr, pas xrandr.

je voudrai voir aussi le retour de xrandr sans argument dans un terminal please

madiwas · 24-03-2023 17:43:23

Oups ! Je suis pas attentif... désolé

# xrandr
Can't open display

mister_g · 24-03-2023 18:01:24

ok,
ta session est sous wayland ou x ?

xrandr est un utilitaire pour xwindow, il ne fonctionne pas sous wayland et n'a pas l'air d'avoir d'équivalent.

madiwas · 24-03-2023 18:55:51

J'utilise Cinnamon, je n'en sais pas plus quelle commande dois-je passer pour savoir ?
Merci encore pour ton aide

debian-noel · 24-03-2023 19:47:59

Bonsoir
en user

echo "$XDG_SESSION_TYPE"

 

Croutons · 24-03-2023 20:42:19

Hello
xrandr doit être utilisé en terminal pour fonctionner , pas en console

Debian Alain · 24-03-2023 20:49:40

bonsoir

xrandr ne dépend pas de x11 ?
je l'utilise sur sid mais sous X.org ....

amicalement ,

madiwas · 25-03-2023 09:52:07

Bonjour à Tous,

Merci encore pour votre aide, voici mes retours :

$ echo "$XDG_SESSION_TYPE"
x11

Pour xrandr, j'ai le même message : # xrandr
Can't open display

debian-noel · 25-03-2023 10:28:27

Bonjour
si tu a ce retour , ton gpu fonctionne mal
en installant le paquet mesa-utils , et avec une commande en user

glxinfo -B

 

tu peux aussi regarder le log de X (dans ton home ou dans /var/log/Xorg.0.log)
tu a deux gpu (VGA et 3D) , intel et nvidia
déjà vérifier ceci

apt policy firmware-misc-nonfree

 

vérifier les erreurs sur cette machine

journalctl -b -r -p err

 

pour les firmwares et les DRM

dmesg | grep -i firmwares

 

dmesg | grep -i drm

 

pour bien configurer ce portable je n'ai pas les compétences désolé
mais si tu donne le retour des commandes cela va aider

Dernière modification par debian-noel (25-03-2023 10:29:45)

debian-noel · 25-03-2023 11:01:46

madiwas a écrit :

Bonjour à Tous,

Merci encore pour votre aide, voici mes retours :

$ echo "$XDG_SESSION_TYPE"
x11

Pour xrandr, j'ai le même message : # xrandr
Can't open display

pas vue le # en première lecture , xrandr est a faire en user

xrandr

 

peut être la cause de ceci: Can't open display

madiwas · 25-03-2023 12:38:55

mesa-utils était déjà installé...

Voici le retour des commandes :

glxinfo -B

 

name of display: :0

display: :0  screen: 0

direct rendering: Yes

Extended renderer info (GLX_MESA_query_renderer):

    Vendor: Intel (0x8086)

    Device: Mesa Intel(R) HD Graphics P630 (KBL GT2) (0x591d)

    Version: 20.3.5

    Accelerated: yes

    Video memory: 3072MB

    Unified memory: yes

    Preferred profile: core (0x1)

    Max core profile version: 4.6

    Max compat profile version: 4.6

    Max GLES1 profile version: 1.1

    Max GLES[23] profile version: 3.2

OpenGL vendor string: Intel

OpenGL renderer string: Mesa Intel(R) HD Graphics P630 (KBL GT2)

OpenGL core profile version string: 4.6 (Core Profile) Mesa 20.3.5

OpenGL core profile shading language version string: 4.60

OpenGL core profile context flags: (none)

OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 20.3.5

OpenGL shading language version string: 4.60

OpenGL context flags: (none)

OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.3.5

OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

apt policy firmware-misc-nonfree

 

firmware-misc-nonfree:

  Installé : 20210315-3

  Candidat : 20210315-3

 Table de version :

 *** 20210315-3 500

        500 [url]http://deb.debian.org/debian[/url] bullseye/non-free amd64 Packages

        100 /var/lib/dpkg/status

journalctl -b -r -p err

 

-- Journal begins at Tue 2023-02-21 00:14:03 CET, ends at Sat 2023-03-25 12:34:47 CET. --

mars 25 12:26:16 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q26 due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 12:26:16 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 12:26:16 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 25 11:03:17 oak cinnamon-screensaver-pam-helper[10836]: pam_unix(cinnamon-screensaver:auth): auth could not identify password for [m]

mars 25 11:03:17 oak cinnamon-screensaver-pam-helper[10836]: pam_unix(cinnamon-screensaver:auth): conversation failed

mars 25 10:43:01 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 10:43:01 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 10:43:01 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 25 10:43:00 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 10:43:00 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 10:43:00 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 25 10:42:11 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 10:42:11 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 10:42:11 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 25 10:42:10 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 10:42:10 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 10:42:10 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 25 09:46:42 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 09:46:42 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 09:46:42 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 25 09:46:41 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 09:46:41 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 25 09:46:41 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 25 09:20:56 oak bluetoothd[703]: sap-server: Operation not permitted (1)

mars 25 09:20:56 oak bluetoothd[703]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.

mars 25 09:20:55 oak kernel: Bluetooth: hci0: Reading supported features failed (-16)

mars 25 09:20:54 oak kernel: mei 0000:00:16.0-55213584-9a29-4916-badf-0fb7ed682aeb: FW version command failed -5

mars 25 09:20:54 oak kernel: mei 0000:00:16.0-55213584-9a29-4916-badf-0fb7ed682aeb: Could not read FW version

mars 24 18:39:04 oak systemd[6982]: Failed to start Sound Service.

mars 24 18:39:03 oak systemd[6982]: Failed to start Sound Service.

mars 24 18:39:03 oak pulseaudio[7015]: Failed to create secure directory (/nonexistent/.config/pulse): Aucun fichier ou dossier de ce type

mars 24 18:39:03 oak systemd[6982]: Failed to start Sound Service.

mars 24 18:39:03 oak pulseaudio[7014]: Failed to create secure directory (/nonexistent/.config/pulse): Aucun fichier ou dossier de ce type

mars 24 18:39:03 oak systemd[6982]: Failed to start Sound Service.

mars 24 18:39:03 oak pulseaudio[7013]: Failed to create secure directory (/nonexistent/.config/pulse): Aucun fichier ou dossier de ce type

mars 24 18:39:03 oak systemd[6982]: Failed to start Sound Service.

mars 24 18:39:03 oak pulseaudio[7012]: Failed to create secure directory (/nonexistent/.config/pulse): Aucun fichier ou dossier de ce type

mars 24 18:39:02 oak systemd[6982]: Failed to start Sound Service.

mars 24 18:39:02 oak pulseaudio[6999]: Failed to create secure directory (/nonexistent/.config/pulse): Aucun fichier ou dossier de ce type

mars 24 18:39:02 oak pipewire[6998]: Failed to receive portal pid: org.freedesktop.DBus.Error.NameHasNoOwner: Could not get PID of name 'org.freedesktop.portal.Desktop': no such name

mars 24 17:42:59 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q26 due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:42:59 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:42:59 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:39:41 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:39:41 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:39:41 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:39:40 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:39:40 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:39:40 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:38:38 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:38 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:38 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:38:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:37 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:38:31 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:31 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:31 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:38:30 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:30 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:30 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:38:27 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:27 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:27 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:38:26 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:26 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:38:26 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:30:38 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:30:38 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:30:38 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:30:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:30:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:30:37 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:30:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:30:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:30:37 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:30:36 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:30:36 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:30:36 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:55 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:55 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:55 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:54 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:54 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:54 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:40 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:40 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:40 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:39 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:39 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:39 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:39 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:39 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:39 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:38 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:38 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:38 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:38 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:38 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:38 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:37 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:37 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:37 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:36 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:36 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:36 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:36 oak pipewire[1200]: Failed to receive portal pid: org.freedesktop.DBus.Error.NameHasNoOwner: Could not get PID of name 'org.freedesktop.portal.Desktop': no such name

mars 24 17:26:36 oak pulseaudio[1089]: Error opening PCM device front:0: Aucun fichier ou dossier de ce type

mars 24 17:26:36 oak pulseaudio[1089]: Error opening PCM device front:0: Aucun fichier ou dossier de ce type

mars 24 17:26:35 oak lightdm[1180]: gkr-pam: unable to locate daemon control file

mars 24 17:26:20 oak pipewire[1088]: Failed to receive portal pid: org.freedesktop.DBus.Error.NameHasNoOwner: Could not get PID of name 'org.freedesktop.portal.Desktop': no such name

mars 24 17:26:19 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4F due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:19 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:19 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:19 oak bluetoothd[703]: sap-server: Operation not permitted (1)

mars 24 17:26:19 oak bluetoothd[703]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.

mars 24 17:26:19 oak kernel: Bluetooth: hci0: Reading supported features failed (-16)

mars 24 17:26:18 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._Q4E due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:18 oak kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.EC.HKEY.DEVT due to previous error (AE_NOT_FOUND) (20200925/psparse-529)

mars 24 17:26:18 oak kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.EC.HKEY.DEVT.PEGS], AE_NOT_FOUND (20200925/psargs-330)

mars 24 17:26:17 oak kernel: mei 0000:00:16.0-55213584-9a29-4916-badf-0fb7ed682aeb: FW version command failed -5

mars 24 17:26:17 oak kernel: mei 0000:00:16.0-55213584-9a29-4916-badf-0fb7ed682aeb: Could not read FW version

mars 24 17:26:17 oak kernel: firmware_class: See [url]https://wiki.debian.org/Firmware[/url] for information about missing firmware

mars 24 17:26:17 oak kernel: iwlwifi 0000:04:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)

dmesg | grep -i firmwares

 

NE RETOURNE RIEN

 

dmesg | grep -i drm

 

[    2.938912] i915 0000:00:02.0: [drm] VT-d active for gfx access

[    2.938931] fb0: switching to inteldrmfb from EFI VGA

[    2.946640] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

[    2.980643] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0

[    2.991845] fbcon: i915drmfb (fb0) is primary device

[    3.023550] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[   19.997928] systemd[1]: Starting Load Kernel Module drm...

[   20.006910] systemd[1]: modprobe@drm.service: Succeeded.

[   20.007119] systemd[1]: Finished Load Kernel Module drm.

[   20.930326] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver

[   20.930335] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1

Dernière modification par madiwas (26-03-2023 11:51:56)

debian-noel · 25-03-2023 15:08:27

pour le firmware désolé , j'ai mit un s
la bonne commande

dmesg | grep -i firmware

 

pour le gpu tu utilise intel par défaut et il fonctionne bien a priori

pour xrandr en commande user tu a regardé (et pas en root ) ?

si tu peux utiliser les balises codes du forum pour une meilleure lisibilité .

sinon pour le switch intel/nvidia tu a installé quelque chose ?

rodrigue7800be · 25-03-2023 15:15:02

01:00.0 3D controller: NVIDIA Corporation GM206GLM [Quadro M2200 Mobile] (rev a1)

Dernière modification par rodrigue7800be (25-03-2023 15:16:54)

madiwas · 26-03-2023 07:52:03

Bonjour,

Je vais essayer pour les balises ;-)

# dmesg | grep -i firmware

[    0.516262] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

[    2.945974] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin

[    2.946640] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

[    2.982300] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS

[    4.197014] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3

[   20.700380] platform regulatory.0: firmware: direct-loading firmware regulatory.db

[   20.700702] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s

[   20.909135] iwlwifi 0000:04:00.0: firmware: direct-loading firmware iwlwifi-8265-36.ucode

[   20.910880] iwlwifi 0000:04:00.0: loaded firmware version 36.ad812ee0.0 8265-36.ucode op_mode iwlmvm

[   20.911214] iwlwifi 0000:04:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)

[   20.911351] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware

[   21.357873] Bluetooth: hci0: Minimum firmware build 1 week 10 2014

[   21.359460] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.sfi

[   21.359465] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi

[   22.895400] Bluetooth: hci0: Waiting for firmware download to complete

[   22.895930] Bluetooth: hci0: Firmware loaded in 1505625 usecs

[   22.908657] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.ddc

[   22.914034] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019

[ 5406.143539] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s

[ 5406.143548] (NULL device *): firmware: direct-loading firmware regulatory.db

[ 5406.143573] (NULL device *): firmware: direct-loading firmware intel/ibt-12-16.ddc

[ 5406.143883] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin

[ 5406.143935] (NULL device *): firmware: direct-loading firmware intel/ibt-12-16.sfi

[ 5406.145043] (NULL device *): firmware: direct-loading firmware iwlwifi-8265-36.ucode

[ 5411.530980] Bluetooth: hci0: Minimum firmware build 1 week 10 2014

[ 5411.530983] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi

[ 5413.086437] Bluetooth: hci0: Waiting for firmware download to complete

[ 5413.086959] Bluetooth: hci0: Firmware loaded in 1524350 usecs

[ 5413.104046] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019

[17648.358740] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin

[17648.358915] (NULL device *): firmware: direct-loading firmware regulatory.db

[17648.358931] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s

[17648.359826] (NULL device *): firmware: direct-loading firmware iwlwifi-8265-36.ucode

[17654.335131] Bluetooth: hci0: Minimum firmware build 1 week 10 2014

[17654.335640] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.sfi

[17654.335652] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi

[17655.829933] Bluetooth: hci0: Waiting for firmware download to complete

[17655.830087] Bluetooth: hci0: Firmware loaded in 1462093 usecs

[17655.842222] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.ddc

[17655.847204] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019

[18021.901812] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin

[18021.902015] (NULL device *): firmware: direct-loading firmware regulatory.db

[18021.902018] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s

[18021.902086] (NULL device *): firmware: direct-loading firmware intel/ibt-12-16.ddc

[18021.902557] (NULL device *): firmware: direct-loading firmware intel/ibt-12-16.sfi

[18021.903850] (NULL device *): firmware: direct-loading firmware iwlwifi-8265-36.ucode

[18025.761520] Bluetooth: hci0: Minimum firmware build 1 week 10 2014

[18025.761532] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi

[18027.235952] Bluetooth: hci0: Waiting for firmware download to complete

[18027.236427] Bluetooth: hci0: Firmware loaded in 1442300 usecs

[18027.253471] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019

madiwas · 26-03-2023 07:55:55

Ah ! C'est plus joli avec les balises... du coup voici xrandr en user

$ xrandr 

Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384

eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm

   1920x1080     60.05*+  60.01    59.97    59.96    59.93  

   1680x1050     59.95    59.88  

   1600x1024     60.17  

   1400x1050     59.98  

   1600x900      59.99    59.94    59.95    59.82  

   1280x1024     60.02  

   1440x900      59.89  

   1400x900      59.96    59.88  

   1280x960      60.00  

   1440x810      60.00    59.97  

   1368x768      59.88    59.85  

   1360x768      59.80    59.96  

   1280x800      59.99    59.97    59.81    59.91  

   1152x864      60.00  

   1280x720      60.00    59.99    59.86    59.74  

   1024x768      60.04    60.00  

   960x720       60.00  

   928x696       60.05  

   896x672       60.01  

   1024x576      59.95    59.96    59.90    59.82  

   960x600       59.93    60.00  

   960x540       59.96    59.99    59.63    59.82  

   800x600       60.00    60.32    56.25  

   840x525       60.01    59.88  

   864x486       59.92    59.57  

   800x512       60.17  

   700x525       59.98  

   800x450       59.95    59.82  

   640x512       60.02  

   720x450       59.89  

   700x450       59.96    59.88  

   640x480       60.00    59.94  

   720x405       59.51    58.99  

   684x384       59.88    59.85  

   680x384       59.80    59.96  

   640x400       59.88    59.98  

   576x432       60.06  

   640x360       59.86    59.83    59.84    59.32  

   512x384       60.00  

   512x288       60.00    59.92  

   480x270       59.63    59.82  

   400x300       60.32    56.34  

   432x243       59.92    59.57  

   320x240       60.05  

   360x202       59.51    59.13  

   320x180       59.84    59.32

madiwas · 26-03-2023 08:42:23

pour le switch intel/nvidia j'ai rien installé, car je ne sais quoi installer en toute sécurité, pour ne pas casser ma configuration...

Dernière modification par madiwas (26-03-2023 08:43:17)

debian-noel · 26-03-2023 11:06:48

madiwas a écrit :

Ah ! C'est plus joli avec les balises... du coup voici xrandr en user

$ xrandr

oui plus agréable a lire
une petite remarque , ne pas mettre $ ou # devant la commande comme ceci

xrandr 

pour le retour on ne voit que eDP-1 , qui est l'écran du portable. (et pas de HDMI)
même sans écran toutes les sorties devraient être listé

il reste a voir le log de X

cat /var/log/Xorg.0.log

 

sinon pour le swith intel/nvidia je ne connais que bumblebee et primus
ou le paquet switcheroo-control
mais je doute que cela améliore quelque chose pour les sorties vidéo
attend l'avis d'autres membres .

madiwas · 26-03-2023 11:54:28

Merci debian-noel,

J'ai tout reformaté...

Voici le cat

cat /var/log/Xorg.0.log

 

[    20.843] 

X.Org X Server 1.20.11

X Protocol Version 11, Revision 0

[    20.843] Build Operating System: linux Debian

[    20.843] Current Operating System: Linux oak 5.10.0-21-amd64 #1 SMP Debian 5.10.162-1 (2023-01-21) x86_64

[    20.843] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-21-amd64 root=/dev/mapper/oak512-root ro quiet

[    20.843] Build Date: 01 February 2023  02:11:18PM

[    20.843] xorg-server 2:1.20.11-1+deb11u5 (https://www.debian.org/support) 

[    20.843] Current version of pixman: 0.40.0

[    20.843]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    20.843] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    20.843] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 26 11:47:13 2023

[    20.844] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    20.846] (==) No Layout section.  Using the first Screen section.

[    20.846] (==) No screen section available. Using defaults.

[    20.846] (**) |-->Screen "Default Screen Section" (0)

[    20.846] (**) |   |-->Monitor "<default monitor>"

[    20.847] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    20.847] (==) Automatically adding devices

[    20.847] (==) Automatically enabling devices

[    20.847] (==) Automatically adding GPU devices

[    20.847] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    20.848] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    20.848]  Entry deleted from font path.

[    20.849] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    20.849] (==) ModulePath set to "/usr/lib/xorg/modules"

[    20.849] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    20.849] (II) Loader magic: 0x55fe03445e40

[    20.849] (II) Module ABI versions:

[    20.849]  X.Org ANSI C Emulation: 0.4

[    20.849]  X.Org Video Driver: 24.1

[    20.849]  X.Org XInput driver : 24.1

[    20.849]  X.Org Server Extension : 10.0

[    20.850] (++) using VT number 7

[    20.850] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

[    20.850] (II) xfree86: Adding drm device (/dev/dri/card1)

[    20.850] (II) xfree86: Adding drm device (/dev/dri/card0)

[    20.865] (--) PCI:*(0@0:2:0) 8086:591d:17aa:224d rev 4, Mem @ 0x2ff2000000/16777216, 0x2fc0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072

[    20.865] (--) PCI: (1@0:0:0) 10de:1436:17aa:224d rev 161, Mem @ 0xeb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288

[    20.865] (II) LoadModule: "glx"

[    20.866] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    20.871] (II) Module glx: vendor="X.Org Foundation"

[    20.871]  compiled for 1.20.11, module version = 1.0.0

[    20.871]  ABI class: X.Org Server Extension, version 10.0

[    21.000] (==) Matched nouveau as autoconfigured driver 0

[    21.000] (==) Matched nv as autoconfigured driver 1

[    21.000] (==) Matched modesetting as autoconfigured driver 2

[    21.000] (==) Matched fbdev as autoconfigured driver 3

[    21.000] (==) Matched vesa as autoconfigured driver 4

[    21.000] (==) Assigned the driver to the xf86ConfigLayout

[    21.000] (II) LoadModule: "nouveau"

[    21.000] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so

[    21.002] (II) Module nouveau: vendor="X.Org Foundation"

[    21.002]  compiled for 1.20.10, module version = 1.0.17

[    21.002]  Module class: X.Org Video Driver

[    21.002]  ABI class: X.Org Video Driver, version 24.1

[    21.002] (II) LoadModule: "nv"

[    21.002] (WW) Warning, couldn't open module nv

[    21.002] (EE) Failed to load module "nv" (module does not exist, 0)

[    21.002] (II) LoadModule: "modesetting"

[    21.002] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    21.003] (II) Module modesetting: vendor="X.Org Foundation"

[    21.003]  compiled for 1.20.11, module version = 1.20.11

[    21.003]  Module class: X.Org Video Driver

[    21.003]  ABI class: X.Org Video Driver, version 24.1

[    21.003] (II) LoadModule: "fbdev"

[    21.003] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    21.004] (II) Module fbdev: vendor="X.Org Foundation"

[    21.004]  compiled for 1.20.0, module version = 0.5.0

[    21.004]  Module class: X.Org Video Driver

[    21.004]  ABI class: X.Org Video Driver, version 24.0

[    21.004] (II) LoadModule: "vesa"

[    21.004] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    21.004] (II) Module vesa: vendor="X.Org Foundation"

[    21.004]  compiled for 1.20.9, module version = 2.5.0

[    21.004]  Module class: X.Org Video Driver

[    21.004]  ABI class: X.Org Video Driver, version 24.1

[    21.004] (II) NOUVEAU driver Date:   Sat Jan 23 12:24:42 2021 -0500

[    21.004] (II) NOUVEAU driver for NVIDIA chipset families :

[    21.004]  RIVA TNT            (NV04)

[    21.004]  RIVA TNT2           (NV05)

[    21.004]  GeForce 256         (NV10)

[    21.004]  GeForce 2           (NV11, NV15)

[    21.004]  GeForce 4MX         (NV17, NV18)

[    21.005]  GeForce 3           (NV20)

[    21.005]  GeForce 4Ti         (NV25, NV28)

[    21.005]  GeForce FX          (NV3x)

[    21.005]  GeForce 6           (NV4x)

[    21.005]  GeForce 7           (G7x)

[    21.005]  GeForce 8           (G8x)

[    21.005]  GeForce 9           (G9x)

[    21.005]  GeForce GTX 2xx/3xx (GT2xx)

[    21.005]  GeForce GTX 4xx/5xx (GFxxx)

[    21.005]  GeForce GTX 6xx/7xx (GKxxx)

[    21.005]  GeForce GTX 9xx     (GMxxx)

[    21.005]  GeForce GTX 10xx    (GPxxx)

[    21.005] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    21.005] (II) FBDEV: driver for framebuffer: fbdev

[    21.005] (II) VESA: driver for VESA chipsets: vesa

[    21.028] (II) modeset(0): using drv /dev/dri/card0

[    21.028] (WW) Falling back to old probe method for fbdev

[    21.028] (II) Loading sub module "fbdevhw"

[    21.028] (II) LoadModule: "fbdevhw"

[    21.028] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    21.029] (II) Module fbdevhw: vendor="X.Org Foundation"

[    21.029]  compiled for 1.20.11, module version = 0.0.2

[    21.029]  ABI class: X.Org Video Driver, version 24.1

[    21.031] (EE) [drm] Failed to open DRM device for (null): -2

[    21.034] (II) modeset(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    21.035] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[    21.035] (==) modeset(0): RGB weight 888

[    21.036] (==) modeset(0): Default visual is TrueColor

[    21.036] (II) Loading sub module "glamoregl"

[    21.037] (II) LoadModule: "glamoregl"

[    21.039] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    21.047] (II) Module glamoregl: vendor="X.Org Foundation"

[    21.047]  compiled for 1.20.11, module version = 1.0.1

[    21.047]  ABI class: X.Org ANSI C Emulation, version 0.4

[    21.198] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics P630 (KBL GT2)

[    21.198] (II) modeset(0): glamor initialized

[    21.199] (II) modeset(0): Output eDP-1 has no monitor section

[    21.200] (II) modeset(0): EDID for output eDP-1

[    21.200] (II) modeset(0): Manufacturer: AUO  Model: 61ed  Serial#: 0

[    21.200] (II) modeset(0): Year: 2016  Week: 0

[    21.200] (II) modeset(0): EDID Version: 1.4

[    21.200] (II) modeset(0): Digital Display Input

[    21.200] (II) modeset(0): 6 bits per channel

[    21.200] (II) modeset(0): Digital interface is DisplayPort

[    21.200] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19

[    21.200] (II) modeset(0): Gamma: 2.20

[    21.200] (II) modeset(0): No DPMS capabilities specified

[    21.200] (II) modeset(0): Supported color encodings: RGB 4:4:4 

[    21.200] (II) modeset(0): First detailed timing is preferred mode

[    21.200] (II) modeset(0): Preferred mode is native pixel format and refresh rate

[    21.200] (II) modeset(0): redX: 0.575 redY: 0.345   greenX: 0.350 greenY: 0.575

[    21.200] (II) modeset(0): blueX: 0.160 blueY: 0.150   whiteX: 0.313 whiteY: 0.329

[    21.200] (II) modeset(0): Manufacturer's mask: 0

[    21.200] (II) modeset(0): Supported detailed timing:

[    21.200] (II) modeset(0): clock: 142.0 MHz   Image Size:  344 x 193 mm

[    21.200] (II) modeset(0): h_active: 1920  h_sync: 2028  h_sync_end 2076 h_blank_end 2100 h_border: 0

[    21.200] (II) modeset(0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1126 v_border: 0

[    21.200] (II) modeset(0): Unknown vendor-specific block f

[    21.200] (II) modeset(0):  AUO

[    21.200] (II) modeset(0):  B156HAN06.1

[    21.200] (II) modeset(0): EDID (in hex):

[    21.200] (II) modeset(0):   00ffffffffffff0006afed6100000000

[    21.200] (II) modeset(0):   001a0104952213780259259358599329

[    21.200] (II) modeset(0):   26505400000001010101010101010101

[    21.200] (II) modeset(0):   010101010101783780b470382e406c30

[    21.200] (II) modeset(0):   aa0058c1100000180000000f00000000

[    21.200] (II) modeset(0):   00000000000000000020000000fe0041

[    21.200] (II) modeset(0):   554f0a202020202020202020000000fe

[    21.200] (II) modeset(0):   004231353648414e30362e31200a00ea

[    21.200] (II) modeset(0): Printing probed modes for output eDP-1

[    21.200] (II) modeset(0): Modeline "1920x1080"x60.1  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)

[    21.200] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)

[    21.200] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)

[    21.200] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)

[    21.200] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)

[    21.200] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)

[    21.200] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)

[    21.200] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)

[    21.200] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)

[    21.200] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)

[    21.200] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)

[    21.200] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)

[    21.200] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)

[    21.200] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)

[    21.200] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)

[    21.200] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)

[    21.200] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)

[    21.201] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)

[    21.201] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)

[    21.201] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)

[    21.201] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)

[    21.201] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)

[    21.201] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)

[    21.201] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)

[    21.201] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)

[    21.201] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)

[    21.201] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)

[    21.201] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)

[    21.201] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)

[    21.201] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)

[    21.201] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)

[    21.201] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)

[    21.201] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)

[    21.201] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)

[    21.201] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)

[    21.201] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)

[    21.201] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)

[    21.201] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)

[    21.201] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)

[    21.201] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)

[    21.201] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)

[    21.201] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)

[    21.201] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)

[    21.201] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)

[    21.201] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)

[    21.201] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)

[    21.201] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)

[    21.201] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)

[    21.201] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)

[    21.201] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)

[    21.201] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)

[    21.201] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)

[    21.201] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)

[    21.201] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)

[    21.201] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)

[    21.201] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)

[    21.201] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[    21.201] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)

[    21.201] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)

[    21.201] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)

[    21.201] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)

[    21.201] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)

[    21.201] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)

[    21.201] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)

[    21.201] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)

[    21.201] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)

[    21.201] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)

[    21.201] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)

[    21.201] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)

[    21.201] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)

[    21.201] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)

[    21.201] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)

[    21.201] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)

[    21.201] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)

[    21.201] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)

[    21.201] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)

[    21.201] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)

[    21.201] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)

[    21.201] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)

[    21.201] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)

[    21.201] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)

[    21.201] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)

[    21.201] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)

[    21.201] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)

[    21.201] (II) modeset(0): Output eDP-1 connected

[    21.201] (II) modeset(0): Using exact sizes for initial modes

[    21.201] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0

[    21.201] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[    21.201] (==) modeset(0): DPI set to (96, 96)

[    21.201] (II) Loading sub module "fb"

[    21.201] (II) LoadModule: "fb"

[    21.201] (II) Loading /usr/lib/xorg/modules/libfb.so

[    21.202] (II) Module fb: vendor="X.Org Foundation"

[    21.202]  compiled for 1.20.11, module version = 1.0.0

[    21.202]  ABI class: X.Org ANSI C Emulation, version 0.4

[    21.202] (II) UnloadModule: "fbdev"

[    21.202] (II) Unloading fbdev

[    21.202] (II) UnloadSubModule: "fbdevhw"

[    21.202] (II) Unloading fbdevhw

[    21.202] (II) UnloadModule: "vesa"

[    21.202] (II) Unloading vesa

[    21.219] (==) modeset(0): Backing store enabled

[    21.219] (==) modeset(0): Silken mouse enabled

[    21.295] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.

[    21.295] (==) modeset(0): DPMS enabled

[    21.296] (II) modeset(0): [DRI2] Setup complete

[    21.296] (II) modeset(0): [DRI2]   DRI driver: iris

[    21.296] (II) modeset(0): [DRI2]   VDPAU driver: va_gl

[    21.296] (II) Initializing extension Generic Event Extension

[    21.296] (II) Initializing extension SHAPE

[    21.296] (II) Initializing extension MIT-SHM

[    21.296] (II) Initializing extension XInputExtension

[    21.297] (II) Initializing extension XTEST

[    21.297] (II) Initializing extension BIG-REQUESTS

[    21.297] (II) Initializing extension SYNC

[    21.297] (II) Initializing extension XKEYBOARD

[    21.297] (II) Initializing extension XC-MISC

[    21.297] (II) Initializing extension SECURITY

[    21.297] (II) Initializing extension XFIXES

[    21.297] (II) Initializing extension RENDER

[    21.298] (II) Initializing extension RANDR

[    21.298] (II) Initializing extension COMPOSITE

[    21.298] (II) Initializing extension DAMAGE

[    21.298] (II) Initializing extension MIT-SCREEN-SAVER

[    21.298] (II) Initializing extension DOUBLE-BUFFER

[    21.298] (II) Initializing extension RECORD

[    21.298] (II) Initializing extension DPMS

[    21.299] (II) Initializing extension Present

[    21.299] (II) Initializing extension DRI3

[    21.299] (II) Initializing extension X-Resource

[    21.299] (II) Initializing extension XVideo

[    21.299] (II) Initializing extension XVideo-MotionCompensation

[    21.299] (II) Initializing extension SELinux

[    21.299] (II) SELinux: Disabled on system

[    21.299] (II) Initializing extension GLX

[    21.313] (II) AIGLX: Loaded and initialized iris

[    21.313] (II) GLX: Initialized DRI2 GL provider for screen 0

[    21.313] (II) Initializing extension XFree86-VidModeExtension

[    21.313] (II) Initializing extension XFree86-DGA

[    21.313] (II) Initializing extension XFree86-DRI

[    21.313] (II) Initializing extension DRI2

[    21.318] (II) modeset(0): Damage tracking initialized

[    21.318] (II) modeset(0): Setting screen physical size to 508 x 285

[    21.369] (II) config/udev: Adding input device Power Button (/dev/input/event3)

[    21.369] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    21.369] (II) LoadModule: "libinput"

[    21.369] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    21.372] (II) Module libinput: vendor="X.Org Foundation"

[    21.372]  compiled for 1.20.8, module version = 0.30.0

[    21.372]  Module class: X.Org XInput Driver

[    21.372]  ABI class: X.Org XInput driver, version 24.1

[    21.372] (II) Using input driver 'libinput' for 'Power Button'

[    21.372] (**) Power Button: always reports core events

[    21.372] (**) Option "Device" "/dev/input/event3"

[    21.372] (**) Option "_source" "server/udev"

[    21.377] (II) event3  - Power Button: is tagged by udev as: Keyboard

[    21.378] (II) event3  - Power Button: device is a keyboard

[    21.378] (II) event3  - Power Button: device removed

[    21.464] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"

[    21.464] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    21.464] (**) Option "xkb_model" "pc105"

[    21.464] (**) Option "xkb_layout" "fr"

[    21.464] (**) Option "xkb_variant" "latin9"

[    21.485] (II) event3  - Power Button: is tagged by udev as: Keyboard

[    21.485] (II) event3  - Power Button: device is a keyboard

[    21.486] (II) config/udev: Adding input device Video Bus (/dev/input/event5)

[    21.486] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    21.486] (II) Using input driver 'libinput' for 'Video Bus'

[    21.486] (**) Video Bus: always reports core events

[    21.486] (**) Option "Device" "/dev/input/event5"

[    21.486] (**) Option "_source" "server/udev"

[    21.487] (II) event5  - Video Bus: is tagged by udev as: Keyboard

[    21.487] (II) event5  - Video Bus: device is a keyboard

[    21.487] (II) event5  - Video Bus: device removed

[    21.544] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7/event5"

[    21.544] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    21.544] (**) Option "xkb_model" "pc105"

[    21.544] (**) Option "xkb_layout" "fr"

[    21.544] (**) Option "xkb_variant" "latin9"

[    21.545] (II) event5  - Video Bus: is tagged by udev as: Keyboard

[    21.545] (II) event5  - Video Bus: device is a keyboard

[    21.546] (II) config/udev: Adding input device Video Bus (/dev/input/event4)

[    21.546] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    21.546] (II) Using input driver 'libinput' for 'Video Bus'

[    21.546] (**) Video Bus: always reports core events

[    21.546] (**) Option "Device" "/dev/input/event4"

[    21.546] (**) Option "_source" "server/udev"

[    21.547] (II) event4  - Video Bus: is tagged by udev as: Keyboard

[    21.547] (II) event4  - Video Bus: device is a keyboard

[    21.548] (II) event4  - Video Bus: device removed

[    21.592] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event4"

[    21.592] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)

[    21.592] (**) Option "xkb_model" "pc105"

[    21.592] (**) Option "xkb_layout" "fr"

[    21.592] (**) Option "xkb_variant" "latin9"

[    21.595] (II) event4  - Video Bus: is tagged by udev as: Keyboard

[    21.595] (II) event4  - Video Bus: device is a keyboard

[    21.597] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)

[    21.597] (II) No input driver specified, ignoring this device.

[    21.597] (II) This device may have been added with another device file.

[    21.598] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)

[    21.598] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[    21.598] (II) Using input driver 'libinput' for 'Sleep Button'

[    21.598] (**) Sleep Button: always reports core events

[    21.598] (**) Option "Device" "/dev/input/event1"

[    21.598] (**) Option "_source" "server/udev"

[    21.600] (II) event1  - Sleep Button: is tagged by udev as: Keyboard

[    21.600] (II) event1  - Sleep Button: device is a keyboard

[    21.600] (II) event1  - Sleep Button: device removed

[    21.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event1"

[    21.624] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)

[    21.624] (**) Option "xkb_model" "pc105"

[    21.624] (**) Option "xkb_layout" "fr"

[    21.624] (**) Option "xkb_variant" "latin9"

[    21.626] (II) event1  - Sleep Button: is tagged by udev as: Keyboard

[    21.626] (II) event1  - Sleep Button: device is a keyboard

[    21.627] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)

[    21.627] (II) No input driver specified, ignoring this device.

[    21.627] (II) This device may have been added with another device file.

[    21.628] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)

[    21.628] (II) No input driver specified, ignoring this device.

[    21.628] (II) This device may have been added with another device file.

[    21.629] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)

[    21.629] (II) No input driver specified, ignoring this device.

[    21.629] (II) This device may have been added with another device file.

[    21.630] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)

[    21.630] (II) No input driver specified, ignoring this device.

[    21.630] (II) This device may have been added with another device file.

[    21.631] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event17)

[    21.631] (II) No input driver specified, ignoring this device.

[    21.631] (II) This device may have been added with another device file.

[    21.632] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event18)

[    21.632] (II) No input driver specified, ignoring this device.

[    21.632] (II) This device may have been added with another device file.

[    21.634] (II) config/udev: Adding input device Logitech G500 (/dev/input/event8)

[    21.634] (**) Logitech G500: Applying InputClass "libinput pointer catchall"

[    21.634] (II) Using input driver 'libinput' for 'Logitech G500'

[    21.635] (**) Logitech G500: always reports core events

[    21.635] (**) Option "Device" "/dev/input/event8"

[    21.635] (**) Option "_source" "server/udev"

[    21.695] (II) event8  - Logitech G500: is tagged by udev as: Mouse

[    21.695] (II) event8  - Logitech G500: device set to 1600 DPI

[    21.695] (II) event8  - Logitech G500: device is a pointer

[    21.696] (II) event8  - Logitech G500: device removed

[    21.768] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C068.0001/input/input9/event8"

[    21.768] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE, id 10)

[    21.768] (**) Option "AccelerationScheme" "none"

[    21.768] (**) Logitech G500: (accel) selected scheme none/0

[    21.768] (**) Logitech G500: (accel) acceleration factor: 2.000

[    21.768] (**) Logitech G500: (accel) acceleration threshold: 4

[    21.829] (II) event8  - Logitech G500: is tagged by udev as: Mouse

[    21.829] (II) event8  - Logitech G500: device set to 1600 DPI

[    21.829] (II) event8  - Logitech G500: device is a pointer

[    21.830] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse2)

[    21.830] (II) No input driver specified, ignoring this device.

[    21.830] (II) This device may have been added with another device file.

[    21.831] (II) config/udev: Adding input device Logitech G500 Keyboard (/dev/input/event9)

[    21.831] (**) Logitech G500 Keyboard: Applying InputClass "libinput keyboard catchall"

[    21.831] (II) Using input driver 'libinput' for 'Logitech G500 Keyboard'

[    21.831] (**) Logitech G500 Keyboard: always reports core events

[    21.831] (**) Option "Device" "/dev/input/event9"

[    21.831] (**) Option "_source" "server/udev"

[    21.832] (II) event9  - Logitech G500 Keyboard: is tagged by udev as: Keyboard

[    21.832] (II) event9  - Logitech G500 Keyboard: device is a keyboard

[    21.833] (II) event9  - Logitech G500 Keyboard: device removed

[    21.856] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C068.0002/input/input10/event9"

[    21.856] (II) XINPUT: Adding extended input device "Logitech G500 Keyboard" (type: KEYBOARD, id 11)

[    21.856] (**) Option "xkb_model" "pc105"

[    21.856] (**) Option "xkb_layout" "fr"

[    21.856] (**) Option "xkb_variant" "latin9"

[    21.860] (II) event9  - Logitech G500 Keyboard: is tagged by udev as: Keyboard

[    21.860] (II) event9  - Logitech G500 Keyboard: device is a keyboard

[    21.862] (II) config/udev: Adding input device Logitech G500 Consumer Control (/dev/input/event10)

[    21.862] (**) Logitech G500 Consumer Control: Applying InputClass "libinput keyboard catchall"

[    21.862] (II) Using input driver 'libinput' for 'Logitech G500 Consumer Control'

[    21.862] (**) Logitech G500 Consumer Control: always reports core events

[    21.862] (**) Option "Device" "/dev/input/event10"

[    21.862] (**) Option "_source" "server/udev"

[    21.866] (II) event10 - Logitech G500 Consumer Control: is tagged by udev as: Keyboard

[    21.867] (II) event10 - Logitech G500 Consumer Control: device is a keyboard

[    21.867] (II) event10 - Logitech G500 Consumer Control: device removed

[    21.888] (II) libinput: Logitech G500 Consumer Control: needs a virtual subdevice

[    21.888] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C068.0002/input/input11/event10"

[    21.888] (II) XINPUT: Adding extended input device "Logitech G500 Consumer Control" (type: MOUSE, id 12)

[    21.888] (**) Option "AccelerationScheme" "none"

[    21.888] (**) Logitech G500 Consumer Control: (accel) selected scheme none/0

[    21.888] (**) Logitech G500 Consumer Control: (accel) acceleration factor: 2.000

[    21.888] (**) Logitech G500 Consumer Control: (accel) acceleration threshold: 4

[    21.892] (II) event10 - Logitech G500 Consumer Control: is tagged by udev as: Keyboard

[    21.892] (II) event10 - Logitech G500 Consumer Control: device is a keyboard

[    21.895] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event19)

[    21.895] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"

[    21.895] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'

[    21.895] (**) Integrated Camera: Integrated C: always reports core events

[    21.895] (**) Option "Device" "/dev/input/event19"

[    21.895] (**) Option "_source" "server/udev"

[    21.898] (II) event19 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard

[    21.899] (II) event19 - Integrated Camera: Integrated C: device is a keyboard

[    21.899] (II) event19 - Integrated Camera: Integrated C: device removed

[    21.948] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input27/event19"

[    21.948] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 13)

[    21.948] (**) Option "xkb_model" "pc105"

[    21.948] (**) Option "xkb_layout" "fr"

[    21.948] (**) Option "xkb_variant" "latin9"

[    21.952] (II) event19 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard

[    21.952] (II) event19 - Integrated Camera: Integrated C: device is a keyboard

[    21.953] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event20)

[    21.953] (II) No input driver specified, ignoring this device.

[    21.953] (II) This device may have been added with another device file.

[    21.954] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event21)

[    21.954] (II) No input driver specified, ignoring this device.

[    21.954] (II) This device may have been added with another device file.

[    21.955] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event22)

[    21.955] (II) No input driver specified, ignoring this device.

[    21.955] (II) This device may have been added with another device file.

[    21.956] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event23)

[    21.956] (II) No input driver specified, ignoring this device.

[    21.956] (II) This device may have been added with another device file.

[    21.957] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event24)

[    21.957] (II) No input driver specified, ignoring this device.

[    21.957] (II) This device may have been added with another device file.

[    21.958] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event25)

[    21.958] (II) No input driver specified, ignoring this device.

[    21.958] (II) This device may have been added with another device file.

[    21.959] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event26)

[    21.959] (II) No input driver specified, ignoring this device.

[    21.959] (II) This device may have been added with another device file.

[    21.961] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event27)

[    21.961] (II) No input driver specified, ignoring this device.

[    21.961] (II) This device may have been added with another device file.

[    21.962] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event28)

[    21.962] (II) No input driver specified, ignoring this device.

[    21.962] (II) This device may have been added with another device file.

[    21.963] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event29)

[    21.963] (II) No input driver specified, ignoring this device.

[    21.963] (II) This device may have been added with another device file.

[    21.964] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[    21.964] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[    21.964] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[    21.964] (**) AT Translated Set 2 keyboard: always reports core events

[    21.964] (**) Option "Device" "/dev/input/event0"

[    21.964] (**) Option "_source" "server/udev"

[    21.967] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard

[    21.967] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard

[    21.969] (II) event0  - AT Translated Set 2 keyboard: device removed

[    21.988] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[    21.988] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)

[    21.988] (**) Option "xkb_model" "pc105"

[    21.988] (**) Option "xkb_layout" "fr"

[    21.988] (**) Option "xkb_variant" "latin9"

[    21.991] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard

[    21.992] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard

[    21.995] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)

[    21.995] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"

[    21.995] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'

[    21.995] (**) SynPS/2 Synaptics TouchPad: always reports core events

[    21.995] (**) Option "Device" "/dev/input/event6"

[    21.995] (**) Option "_source" "server/udev"

[    21.998] (II) event6  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad

[    22.001] (II) event6  - SynPS/2 Synaptics TouchPad: device is a touchpad

[    22.001] (II) event6  - SynPS/2 Synaptics TouchPad: device removed

[    22.052] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event6"

[    22.052] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)

[    22.054] (**) Option "AccelerationScheme" "none"

[    22.054] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0

[    22.054] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000

[    22.054] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4

[    22.056] (II) event6  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad

[    22.059] (II) event6  - SynPS/2 Synaptics TouchPad: device is a touchpad

[    22.061] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)

[    22.061] (II) No input driver specified, ignoring this device.

[    22.061] (II) This device may have been added with another device file.

[    22.062] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event7)

[    22.062] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"

[    22.062] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'

[    22.062] (**) TPPS/2 IBM TrackPoint: always reports core events

[    22.062] (**) Option "Device" "/dev/input/event7"

[    22.062] (**) Option "_source" "server/udev"

[    22.065] (II) event7  - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick

[    22.066] (II) event7  - TPPS/2 IBM TrackPoint: device is a pointer

[    22.069] (II) event7  - TPPS/2 IBM TrackPoint: device removed

[    22.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input8/event7"

[    22.120] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)

[    22.120] (**) Option "AccelerationScheme" "none"

[    22.120] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0

[    22.120] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000

[    22.120] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4

[    22.123] (II) event7  - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick

[    22.124] (II) event7  - TPPS/2 IBM TrackPoint: device is a pointer

[    22.128] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)

[    22.128] (II) No input driver specified, ignoring this device.

[    22.128] (II) This device may have been added with another device file.

[    22.129] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)

[    22.129] (II) No input driver specified, ignoring this device.

[    22.129] (II) This device may have been added with another device file.

[    22.131] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event11)

[    22.131] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"

[    22.131] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'

[    22.131] (**) ThinkPad Extra Buttons: always reports core events

[    22.131] (**) Option "Device" "/dev/input/event11"

[    22.131] (**) Option "_source" "server/udev"

[    22.133] (II) event11 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch

[    22.134] (II) event11 - ThinkPad Extra Buttons: device is a keyboard

[    22.134] (II) event11 - ThinkPad Extra Buttons: device removed

[    22.164] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input14/event11"

[    22.164] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)

[    22.164] (**) Option "xkb_model" "pc105"

[    22.164] (**) Option "xkb_layout" "fr"

[    22.164] (**) Option "xkb_variant" "latin9"

[    22.167] (II) event11 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch

[    22.167] (II) event11 - ThinkPad Extra Buttons: device is a keyboard

[    22.194] (**) Logitech G500 Consumer Control: Applying InputClass "libinput keyboard catchall"

[    22.195] (II) Using input driver 'libinput' for 'Logitech G500 Consumer Control'

[    22.195] (**) Logitech G500 Consumer Control: always reports core events

[    22.195] (**) Option "Device" "/dev/input/event10"

[    22.195] (**) Option "_source" "_driver/libinput"

[    22.195] (II) libinput: Logitech G500 Consumer Control: is a virtual subdevice

[    22.195] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C068.0002/input/input11/event10"

[    22.195] (II) XINPUT: Adding extended input device "Logitech G500 Consumer Control" (type: KEYBOARD, id 18)

[    22.195] (**) Option "xkb_model" "pc105"

[    22.195] (**) Option "xkb_layout" "fr"

[    22.195] (**) Option "xkb_variant" "latin9"

[    33.705] (II) modeset(0): EDID vendor "AUO", prod id 25069

[    33.705] (II) modeset(0): Printing DDC gathered Modelines:

[    33.705] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)

[    33.753] (II) modeset(0): EDID vendor "AUO", prod id 25069

[    33.753] (II) modeset(0): Printing DDC gathered Modelines:

[    33.753] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)

[    33.790] (II) modeset(0): EDID vendor "AUO", prod id 25069

[    33.790] (II) modeset(0): Printing DDC gathered Modelines:

[    33.790] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)

[    33.792] (II) modeset(0): EDID vendor "AUO", prod id 25069

[    33.792] (II) modeset(0): Printing DDC gathered Modelines:

[    33.792] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)

[    33.859] (II) modeset(0): EDID vendor "AUO", prod id 25069

[    33.859] (II) modeset(0): Printing DDC gathered Modelines:

[    33.859] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)

[    34.063] (II) modeset(0): EDID vendor "AUO", prod id 25069

[    34.063] (II) modeset(0): Printing DDC gathered Modelines:

[    34.063] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)

[    34.405] (II) modeset(0): EDID vendor "AUO", prod id 25069

[    34.405] (II) modeset(0): Printing DDC gathered Modelines:

[    34.405] (II) modeset(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)

madiwas · 26-03-2023 12:04:29

Je viens d'installer les paquets

primus, primus-nvidia, bumblebee, bumblebee-nvidia & switcheroo-control

Rien de plus...

Après, je ne sais que faire de ces paquets ;-)

Dernière modification par madiwas (26-03-2023 12:04:53)

debian-noel · 26-03-2023 17:49:17

pour le log de X , il montre que eDP-1 comme sortie vidéo (comme xrandr )
pour les paquets :
soit "bumblebee primus" avec le driver nouveau
soit bumblebee-nvidia primus avec le driver nvidia
soit switcheroo-control (qui n'a pas besoin de bumblebee)
et dans tous les cas un reboot nécessaire .
toujours sur le log de X on ne voit pas nvidia il me semble
pourtant on voit les deux cartes

[ 20.850] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 20.850] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.865] (--) PCI:*(0@0:2:0) 8086:591d:17aa:224d rev 4, Mem @ 0x2ff2000000/16777216, 0x2fc0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[ 20.865] (--) PCI: (1@0:0:0) 10de:1436:17aa:224d rev 161, Mem @ 0xeb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288

mais a priori la carte nvidia ne fonctionne pas avec nouveau

[ 21.004] (II) NOUVEAU driver Date: Sat Jan 23 12:24:42 2021 -0500
[ 21.004] (II) NOUVEAU driver for NVIDIA chipset families :
[ 21.031] (EE) [drm] Failed to open DRM device for (null): -2

donc avec le driver nividia de bumblebee-nvidia cela doit être différent
mais il faut ces deux paquets installés

apt policy linux-image-amd64 et linux-headers-amd64

 

il te manque peut être linux-headers-amd64 et la compilation du driver nvidia a échoué .
mais bon a priori cela ne résous pas l'absence de la deuxième sortie
il doit y avoir un wiki pour installer correctement bumblebee-nvidia
remarque:
tu peu purger les paquets
et recommencer correctement

apt remove --purge *nvidia* bumblebee bumblebee-nvidia primus primus-nvidia switcheroo-control

 

celui de debian https://wiki.debian.org/fr/Bumblebee
pour toi celui ci (fr)

Debian 11 et versions suivantes
Pour les utilisateurs souhaitant utiliser le pilote propriétaire (assurez-vous que les composants contrib et non-free sont activés dans votre fichier fr/SourcesList) :

sudo apt install bumblebee-nvidia primus-nvidia primus-vk-nvidia

Utilisation

Alors que la commande optirun utilisée dans Debian 10 et les versions plus anciennes est toujours disponible, de meilleures performances peuvent être trouvées par l'utilisation de la nouvelle commande primusrun. Elle utilise la même syntaxe que la commande précédente, c'est à dire :

primusrun [options] <application> [application-parameters]

Ce qui ressemble quelque chose comme :

primusrun glxgears -info

la version (en) https://wiki.debian.org/Bumblebee

Dernière modification par debian-noel (26-03-2023 17:56:37)

madiwas · 26-03-2023 19:35:38

Petit retour...

apt policy linux-image-amd64

linux-image-amd64:

  Installé : 5.10.162-1

  Candidat : 5.10.162-1

 Table de version :

 *** 5.10.162-1 500

        500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages

        100 /var/lib/dpkg/status

     5.10.158-2 500

        500 http://deb.debian.org/debian bullseye/main amd64 Packages

apt policy linux-headers-amd64

linux-headers-amd64:

  Installé : 5.10.162-1

  Candidat : 5.10.162-1

 Table de version :

 *** 5.10.162-1 500

        500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages

        100 /var/lib/dpkg/status

     5.10.158-2 500

        500 http://deb.debian.org/debian bullseye/main amd64 Packages

J'ai essayé d'installer des pilotes NVIDIA, mais ce ne se passe pas bien, voici le log

more nvidia-installer.log

nvidia-installer log file '/var/log/nvidia-installer.log'

creation time: Sun Mar 26 20:20:46 2023

installer version: 525.89.02

PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

nvidia-installer command line:

    ./nvidia-installer

Using: nvidia-installer ncurses v6 user interface

-> Detected 8 CPUs online; setting concurrency level to 8.

-> The file '/tmp/.X0-lock' exists and appears to contain the process ID '4992' of a running X server.

ERROR: You appear to be running an X server; please exit X before installing.  For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page a

t www.nvidia.com.

ERROR: Installation has failed.  Please see the file '/var/log/nvidia-installer.log' for details.  You may find suggestions on fixing installation problems in the README available on the Linux driver download pa

ge at www.nvidia.com.

Je vais essayer ta commande apt remove --purge *nvidia* bumblebee bumblebee-nvidia primus primus-nvidia switcheroo-control et passer à la suite de tes recommandations

madiwas · 26-03-2023 19:58:19

Oups !!!

J'ai voulu faire un

apt install nvidia-legacy-390xx-driver firmware-misc-nonfree

suite au recommandation que j'ai trouvé sur https://wiki.debian.org/fr/NvidiaGraphi … eye_.2BALs- et à présent mon bureau Cinnamon est HS

Debian-facile

#1 15-03-2023 22:24:20

Double écran non détecté

#2 23-03-2023 16:48:57

Re : Double écran non détecté

#3 24-03-2023 09:13:54

Re : Double écran non détecté

#4 24-03-2023 09:42:42

Re : Double écran non détecté

#5 24-03-2023 17:43:23

Re : Double écran non détecté

#6 24-03-2023 18:01:24

Re : Double écran non détecté

#7 24-03-2023 18:55:51

Re : Double écran non détecté

#8 24-03-2023 19:47:59

Re : Double écran non détecté

#9 24-03-2023 20:42:19

Re : Double écran non détecté

#10 24-03-2023 20:49:40

Re : Double écran non détecté

#11 25-03-2023 09:52:07

Re : Double écran non détecté

#12 25-03-2023 10:28:27

Re : Double écran non détecté

#13 25-03-2023 11:01:46

Re : Double écran non détecté

#14 25-03-2023 12:38:55

Re : Double écran non détecté

#15 25-03-2023 15:08:27

Re : Double écran non détecté

#16 25-03-2023 15:15:02

Re : Double écran non détecté

#17 26-03-2023 07:52:03

Re : Double écran non détecté

#18 26-03-2023 07:55:55

Re : Double écran non détecté

#19 26-03-2023 08:42:23

Re : Double écran non détecté

#20 26-03-2023 11:06:48

Re : Double écran non détecté

#21 26-03-2023 11:54:28

Re : Double écran non détecté

#22 26-03-2023 12:04:29

Re : Double écran non détecté

#23 26-03-2023 17:49:17

Re : Double écran non détecté

#24 26-03-2023 19:35:38

Re : Double écran non détecté

#25 26-03-2023 19:58:19

Re : Double écran non détecté

Pied de page des forums