Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 12-05-2019 11:13:44

jean-thevenet
Membre
Inscription : 07-05-2019

Erreur DRM et "blue-tooth"

Depuis le début de débian Stretch j'ai systématiquement ces messages d'erreur au boot
J'y ei déjà passé beaucoup de temps, à chercher pourquoi, mais avant le fameux "dist-up-grade" qui a tout fait dysfonctionner, tout ce que j'avais besoin marchait correctement, sauf les logiciels d'éditions Vidéo tels Openshot et Pitivi seuls qui "marchent quand même", mais se bloquent avec certaines manières de déplacer la souris, réussir à faire un montage demande à minimiser un maximum l'usage de la souri dans la fenêtre ouverte.

blue-tooth: ça ne risque pas de marcher, il y en a pas

Écran:
Depuis stretch, débian, dans mon ordinateur 157456-11402138.jpg  se considère dans un "laptop" sans reconnaître d'écran externe, ce qui impose automatiquement le 60Hz et rien d'autre comme fréquence d'image (donc compatible seulement avec les médias NTSC).
Seul gdm3 accepter de démarrer l'interface graphique, les autres gestionnaires de connexion laissent juste un écran noir avec un curseur clignotant. J'ai l'idée que mes problèmes de lecture avec fluidité vidéo ont un lien étroit avec gnome, ainsi que l'impossibilité de choisir mon écran.
Je m'en suis accomodé durant 2 ans, mais mes activité en vidéo demandent d'être équipé pour au moins visionner les images d'une go-pro et des appareils photo filmant éventuellement en "PAL" (multiples de 25i/ secondes), sans compter les phénomènes de "tearing" et de "saut" devenus envahissant depuis le dist-upgrade de strech 9.0 à 9.9 et ne me permettant même plus de visionner mon propre "travail".


[    2.812312] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[    2.812323] EDID block is all zeroes
[    2.815918] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[    2.815928] EDID block is all zeroes
[    2.819467] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[    2.819473] EDID block is all zeroes
[    2.823045] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[    2.823053] EDID block is all zeroes

[    0.019586] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160831/dswload-210)
[    0.019771] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160831/psobject-238)
[    0.019936] ACPI Exception: AE_NOT_FOUND, (SSDT: SKL-ULT) while loading table (20160831/tbxfload-228)
[    0.021036] ACPI Error: 1 table load failures, 6 successful (20160831/tbxfload-246)
 



[    2.823061] i915 0000:00:02.0: eDP-1: Ignoring invalid EDID block 1.
[    2.824457] [drm] GuC firmware load skipped
[    2.849144] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.849852] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    2.850151] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.850163] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    2.854212] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[    2.856344] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
 


# lspci -nnk | grep -i vga -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06)
  Subsystem: Intel Corporation HD Graphics 530 [8086:1912]
  Kernel driver in use: i

915


dmesg |grep -i firmware

[    0.023407] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.165532] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    2.824457] [drm] GuC firmware load skipped
[    2.854212] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
 

Dernière modification par jean-thevenet (12-05-2019 12:23:14)

Hors ligne

#2 12-05-2019 11:18:31

jean-thevenet
Membre
Inscription : 07-05-2019

Re : Erreur DRM et "blue-tooth"

Hors ligne

#3 12-05-2019 11:32:12

jean-thevenet
Membre
Inscription : 07-05-2019

Re : Erreur DRM et "blue-tooth"

# uname -a

Linux cilaos-centre-du-monde 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1 (2019-04-12) x86_64 GNU/Linux



apt-get install linux-image-3.16.0-4-amd64 linux-headers-3.16.0-4-amd64

(vu dans l'autre topic)

Dans la même logique deviendrais

apt-get install linux-image-4.9.0-9-amd64 linux-headers-4.9.0-9-amd64


Mais ce n'est peut être pas équivalent car il ne se trouve pas dans  dmesg > /home/jean/Documents/log-boot.txt
la chaine de caractère "

[drm:intel_dsm_platform_mux_info]

"

# apt-get install linux-image-4.9.0-9-amd64 linux-headers-4.9.0-9-amd64

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
linux-image-4.9.0-9-amd64 is already the newest version (4.9.168-1).
linux-image-4.9.0-9-amd64 passé en « installé manuellement ».
Les NOUVEAUX paquets suivants seront installés :
  linux-headers-4.9.0-9-amd64 linux-headers-4.9.0-9-common
0 mis à jour, 2 nouvellement installés, 0 à enlever et 1 non mis à jour.
Il est nécessaire de prendre 8 120 ko dans les archives.
Après cette opération, 49,9 Mo d'espace disque supplémentaires seront utilisés.
Réception de:1 http://deb.debian.org/debian stretch/main amd64 linux-headers-4.9.0-9-common all 4.9.168-1 [7 671 kB]
Réception de:2 http://deb.debian.org/debian stretch/main amd64 linux-headers-4.9.0-9-amd64 amd64 4.9.168-1 [449 kB]                                                                                      
8 120 ko réceptionnés en 8s (997 ko/s)                                                                                                                                                                    
Sélection du paquet linux-headers-4.9.0-9-common précédemment désélectionné.
(Lecture de la base de données... 363749 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../linux-headers-4.9.0-9-common_4.9.168-1_all.deb ...
Dépaquetage de linux-headers-4.9.0-9-common (4.9.168-1) ...
Sélection du paquet linux-headers-4.9.0-9-amd64 précédemment désélectionné.
Préparation du dépaquetage de .../linux-headers-4.9.0-9-amd64_4.9.168-1_amd64.deb ...
Dépaquetage de linux-headers-4.9.0-9-amd64 (4.9.168-1) ...
Paramétrage de linux-headers-4.9.0-9-common (4.9.168-1) ...
Paramétrage de linux-headers-4.9.0-9-amd64 (4.9.168-1) ...

Dernière modification par jean-thevenet (12-05-2019 11:47:14)

Hors ligne

#4 12-05-2019 12:00:43

Debian Alain
Adhérent(e)
Lieu : Bretagne
Distrib. : stable / testing
Noyau : Linux 5.9.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : Erreur DRM et "blue-tooth"

si j'en crois ce post :

https://bugs.launchpad.net/ubuntu/+sour … ug/1240882

je te conseilles 2 choses :

mettre à jour ton kernel .
peut être installer celui des backports ?

mettre à jour ton pilote & ton firmware graphique .
peut être prendre celui/ceux des backports ?

Je te conseilles le sources.list suivant :


# Debian Stretch, dépôt principal + paquets non libres
deb http://deb.debian.org/debian/ stretch main contrib non-free
# Debian Stretch, mises à jour de sécurité + paquets non libres
deb http://security.debian.org/ stretch/updates main contrib non-free
# Debian Stretch, mises à jour "volatiles" + paquets non libres
deb http://deb.debian.org/debian/ stretch-updates main contrib non-free
# Debian Stretch, dépôt de rétroportages ("backports")
deb http://deb.debian.org/debian/ stretch-backports main contrib non-free
 

En ligne

#5 12-05-2019 19:10:36

jean-thevenet
Membre
Inscription : 07-05-2019

Re : Erreur DRM et "blue-tooth"

Ça n'a rien changé.
# dmesg > /home/jean/Documents/log-boot-apres-installation-backports.txt

[    0.000000] microcode: microcode updated early to revision 0xc6, date = 2018-04-17
[    0.000000] Linux version 4.9.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.168-1 (2019-04-12)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-amd64 root=UUID=0c350407-892c-4191-9ca6-65382f382246 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000823b1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000823b2000-0x00000000823b2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000823b3000-0x00000000823dcfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000823dd000-0x000000009867efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009867f000-0x000000009af7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009af7f000-0x000000009cf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff900000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Neousys Technology Inc. Nuvo-5000/NVS-5000, BIOS Build170627 06/27/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25e000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff937f800fe1b0]
[    0.000000] Base memory trampoline at [ffff937f80098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x161b34000, 0x161b34fff] PGTABLE
[    0.000000] BRK [0x161b35000, 0x161b35fff] PGTABLE
[    0.000000] BRK [0x161b36000, 0x161b36fff] PGTABLE
[    0.000000] BRK [0x161b37000, 0x161b37fff] PGTABLE
[    0.000000] BRK [0x161b38000, 0x161b38fff] PGTABLE
[    0.000000] BRK [0x161b39000, 0x161b39fff] PGTABLE
[    0.000000] BRK [0x161b3a000, 0x161b3afff] PGTABLE
[    0.000000] BRK [0x161b3b000, 0x161b3bfff] PGTABLE
[    0.000000] BRK [0x161b3c000, 0x161b3cfff] PGTABLE
[    0.000000] BRK [0x161b3d000, 0x161b3dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35821000-0x36c07fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 INSYDE)
[    0.000000] ACPI: XSDT 0x000000009CFC7188 0000D4 (v01 INSYDE SKL-ULT  00000000      01000013)
[    0.000000] ACPI: FACP 0x000000009CFED000 0000F4 (v04 INSYDE SKL-ULT  00000000 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFCD000 01A6B5 (v02 INSYDE SKL-ULT  00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF7D000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 INSYDE SKL-ULT  00000002 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF5000 0052EE (v02 INSYDE SKL-ULT  00003000 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFF4000 000034 (v01 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000009CFF3000 000054 (v00 INSYDE SKL-ULT  00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF2000 000622 (v02 INSYDE SKL-ULT  00000000 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFF1000 0000A5 (v32 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFF0000 000034 (v07 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFEF000 000028 (v01 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFEE000 000034 (v01 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFEC000 000038 (v01 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFEB000 000094 (v01 INSYDE SKL-ULT  00000000 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFEA000 0000BC (v02 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFE9000 00003C (v01 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009CFE8000 000134 (v01 INSYDE SKL-ULT  00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCC000 000E59 (v02 INSYDE SKL-ULT  00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCB000 00019A (v02 INSYDE SKL-ULT  00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCA000 000E73 (v02 INSYDE SKL-ULT  00003000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFC9000 0000A8 (v01 INSYDE SKL-ULT  00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFC8000 000ABD (v01 INSYDE SKL-ULT  00001000 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFC6000 000044 (v01 INSYDE SKL-ULT  00000002 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025dffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25dffb000-0x25dffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025dffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000823b1fff]
[    0.000000]   node   0: [mem 0x00000000823dd000-0x000000009867efff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025dffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025dffffff]
[    0.000000] On node 0 totalpages: 2057714
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9690 pages used for memmap
[    0.000000]   DMA32 zone: 620117 pages, LIFO batch:31
[    0.000000]   Normal zone: 22400 pages used for memmap
[    0.000000]   Normal zone: 1433600 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x823b2000-0x823b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x823b3000-0x823dcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9867f000-0x9af7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9af7f000-0x9cf7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff8fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff900000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9381ddc00000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2025539
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-amd64 root=UUID=0c350407-892c-4191-9ca6-65382f382246 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7997108K/8230856K available (6273K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 233748K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 3200.000 MHz processor
[    0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.00 BogoMIPS (lpj=12768000)
[    0.000019] pid_max: default: 32768 minimum: 301
[    0.000030] ACPI: Core revision 20160831
[    0.019590] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160831/dswload-210)
[    0.019774] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160831/psobject-238)
[    0.019940] ACPI Exception: AE_NOT_FOUND, (SSDT: SKL-ULT) while loading table (20160831/tbxfload-228)
[    0.021035] ACPI Error: 1 table load failures, 6 successful (20160831/tbxfload-246)
[    0.021203] Security Framework initialized
[    0.021203] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.021207] AppArmor: AppArmor disabled by boot time parameter
[    0.021488] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.022653] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023186] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023192] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023385] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023386] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.023389] mce: CPU supports 10 MCE banks
[    0.023397] CPU0: Thermal monitoring enabled (TM1)
[    0.023412] process: using mwait in idle threads
[    0.023414] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.023414] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.023416] Spectre V2 : Mitigation: Full generic retpoline
[    0.023416] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.023416] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.023417] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.023417] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.027188] Freeing SMP alternatives memory: 24K
[    0.029022] ftrace: allocating 25308 entries in 99 pages
[    0.047342] smpboot: Max logical packages: 1
[    0.047347] DMAR: Host address width 39
[    0.047348] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.047352] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.047352] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.047355] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.047356] DMAR: RMRR base: 0x0000009aeab000 end: 0x0000009aecafff
[    0.047357] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.047358] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.047358] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.047359] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.047359] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.048745] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.048745] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.052741] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.092432] TSC deadline timer enabled
[    0.092436] smpboot: CPU0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.092439] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.092465] ... version:                4
[    0.092465] ... bit width:              48
[    0.092465] ... generic registers:      8
[    0.092466] ... value mask:             0000ffffffffffff
[    0.092466] ... max period:             00007fffffffffff
[    0.092467] ... fixed-purpose events:   3
[    0.092467] ... event mask:             00000007000000ff
[    0.092882] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.092957] x86: Booting SMP configuration:
[    0.092958] .... node  #0, CPUs:      #1 #2 #3
[    0.103174] x86: Booted up 1 node, 4 CPUs
[    0.103176] smpboot: Total of 4 processors activated (25536.00 BogoMIPS)
[    0.105736] devtmpfs: initialized
[    0.105780] x86/mm: Memory block size: 128MB
[    0.108069] PM: Registering ACPI NVS region [mem 0x823b2000-0x823b2fff] (4096 bytes)
[    0.108070] PM: Registering ACPI NVS region [mem 0x9af7f000-0x9cf7efff] (33554432 bytes)
[    0.108551] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108556] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.108588] pinctrl core: initialized pinctrl subsystem
[    0.108663] NET: Registered protocol family 16
[    0.121547] cpuidle: using governor ladder
[    0.137560] cpuidle: using governor menu
[    0.137639] Simple Boot Flag at 0x44 set to 0x1
[    0.137654] ACPI: bus type PCI registered
[    0.137654] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.137707] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.137708] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.137711] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
[    0.137763] PCI: Using configuration type 1 for base access
[    0.153704] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.153705] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.153874] ACPI: Added _OSI(Module Device)
[    0.153875] ACPI: Added _OSI(Processor Device)
[    0.153875] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.153876] ACPI: Added _OSI(Processor Aggregator Device)
[    0.154767] ACPI: Executed 17 blocks of module-level executable AML code
[    0.161992] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.164336] ACPI: Dynamic OEM Table Load:
[    0.164410] ACPI: SSDT 0xFFFF9381D3A1A000 0006A2 (v02 PmRef  Cpu0Ist  00003000 INTL 20160108)
[    0.164632] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.165652] ACPI: Dynamic OEM Table Load:
[    0.165657] ACPI: SSDT 0xFFFF9381D3FA5800 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20160108)
[    0.166280] ACPI: Dynamic OEM Table Load:
[    0.166286] ACPI: SSDT 0xFFFF9381D3A1A800 0005AA (v02 PmRef  ApIst    00003000 INTL 20160108)
[    0.166730] ACPI: Dynamic OEM Table Load:
[    0.166736] ACPI: SSDT 0xFFFF9381D3840C00 000119 (v02 PmRef  ApCst    00003000 INTL 20160108)
[    0.168388] ACPI: Interpreter enabled
[    0.168422] ACPI: (supports S0 S3 S4 S5)
[    0.168422] ACPI: Using IOAPIC for interrupt routing
[    0.168450] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.168895] ACPI: Power Resource [PG00] (on)
[    0.169198] ACPI: Power Resource [PG01] (on)
[    0.169492] ACPI: Power Resource [PG02] (on)
[    0.181901] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.183271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.183275] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.185583] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.187125] PCI host bridge to bus 0000:00
[    0.187126] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.187127] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.187128] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.187129] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window]
[    0.187130] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.187131] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.187137] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[    0.187746] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[    0.187753] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.187758] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.187761] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.188434] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.188450] pci 0000:00:14.0: reg 0x10: [mem 0xc1120000-0xc112ffff 64bit]
[    0.188507] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.189144] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.189201] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.189231] pci 0000:00:16.0: reg 0x10: [mem 0xc114a000-0xc114afff 64bit]
[    0.189338] pci 0000:00:16.0: PME# supported from D3hot
[    0.189968] pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
[    0.189984] pci 0000:00:16.3: reg 0x10: [io  0x4080-0x4087]
[    0.189994] pci 0000:00:16.3: reg 0x14: [mem 0xc114e000-0xc114efff]
[    0.190667] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.190679] pci 0000:00:17.0: reg 0x10: [mem 0xc1148000-0xc1149fff]
[    0.190685] pci 0000:00:17.0: reg 0x14: [mem 0xc114d000-0xc114d0ff]
[    0.190691] pci 0000:00:17.0: reg 0x18: [io  0x4088-0x408f]
[    0.190697] pci 0000:00:17.0: reg 0x1c: [io  0x4090-0x4093]
[    0.190703] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.190709] pci 0000:00:17.0: reg 0x24: [mem 0xc114b000-0xc114b7ff]
[    0.190743] pci 0000:00:17.0: PME# supported from D3hot
[    0.191366] pci 0000:00:1c.0: [8086:a112] type 01 class 0x060400
[    0.191417] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.192028] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.192083] pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100
[    0.192784] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.192794] pci 0000:00:1f.2: reg 0x10: [mem 0xc1144000-0xc1147fff]
[    0.193451] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.193471] pci 0000:00:1f.3: reg 0x10: [mem 0xc1140000-0xc1143fff 64bit]
[    0.193500] pci 0000:00:1f.3: reg 0x20: [mem 0xc1130000-0xc113ffff 64bit]
[    0.193545] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.194168] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.194201] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.194247] pci 0000:00:1f.4: reg 0x10: [mem 0xc114c000-0xc114c0ff 64bit]
[    0.194316] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
[    0.195004] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[    0.195024] pci 0000:00:1f.6: reg 0x10: [mem 0xc1100000-0xc111ffff]
[    0.195128] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.195723] pci 0000:00:1f.6: System wakeup disabled by ACPI
[    0.195799] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000
[    0.195820] pci 0000:01:00.0: reg 0x10: [mem 0xc1000000-0xc107ffff]
[    0.195844] pci 0000:01:00.0: reg 0x18: [io  0x3000-0x301f]
[    0.195856] pci 0000:01:00.0: reg 0x1c: [mem 0xc1080000-0xc1083fff]
[    0.195973] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.196021] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.205633] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.205640] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.205659] pci 0000:00:1c.0:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.206820] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.206862] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.206902] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.206941] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.206980] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.207019] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.207059] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.207099] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.207263] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.207332] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.207333] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.207335] vgaarb: loaded
[    0.207336] vgaarb: bridge control possible 0000:00:02.0
[    0.207375] PCI: Using ACPI for IRQ routing
[    0.214270] PCI: pci_cache_line_size set to 64 bytes
[    0.214306] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.214307] e820: reserve RAM buffer [mem 0x823b2000-0x83ffffff]
[    0.214308] e820: reserve RAM buffer [mem 0x9867f000-0x9bffffff]
[    0.214308] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.214309] e820: reserve RAM buffer [mem 0x25e000000-0x25fffffff]
[    0.214450] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.214454] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.216494] clocksource: Switched to clocksource hpet
[    0.220934] VFS: Disk quotas dquot_6.6.0
[    0.220950] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.221004] pnp: PnP ACPI init
[    0.221106] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.221107] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.221108] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.221109] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.221110] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.221112] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.221113] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.221115] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221337] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.221338] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221434] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.221435] system 00:02: [io  0xffff] has been reserved
[    0.221436] system 00:02: [io  0xffff] has been reserved
[    0.221437] system 00:02: [io  0xffff] has been reserved
[    0.221439] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.221440] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.221441] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221507] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.221508] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221525] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.221552] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.221554] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.221580] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.221831] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.222053] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.222273] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.222493] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.223434] system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.223435] system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.223436] system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.223438] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.223834] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.223835] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.223836] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.223837] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.223838] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.223840] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.223841] system 00:0c: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.223842] system 00:0c: [mem 0xff000000-0xffffffff] could not be reserved
[    0.223843] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.223844] system 00:0c: [mem 0xa0000000-0xa001ffff] has been reserved
[    0.223846] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224005] pnp: PnP ACPI: found 13 devices
[    0.230699] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.230709] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.230711] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.230713] pci 0000:00:1c.0:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.230719] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.230720] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.230721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.230722] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xefffffff window]
[    0.230723] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.230724] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.230724] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc10fffff]
[    0.230851] NET: Registered protocol family 2
[    0.230964] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.231049] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.231181] TCP: Hash tables configured (established 65536 bind 65536)
[    0.231199] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.231218] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.231262] NET: Registered protocol family 1
[    0.231270] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.232706] PCI: CLS 64 bytes, default 64
[    0.232732] Unpacking initramfs...
[    0.471120] Freeing initrd memory: 20380K
[    0.471167] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.471169] software IO TLB: mapped [mem 0x9467f000-0x9867f000] (64MB)
[    0.471423] audit: initializing netlink subsys (disabled)
[    0.471435] audit: type=2000 audit(1557678324.468:1): initialized
[    0.471798] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.471860] zbud: loaded
[    0.472762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.472794] io scheduler noop registered
[    0.472795] io scheduler deadline registered
[    0.472806] io scheduler cfq registered (default)
[    0.473057] aer 0000:00:1c.0:pcie002: service driver aer loaded
[    0.473066] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.473067] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.473069] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.473074] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.473077] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.473086] intel_idle: MWAIT substates: 0x142120
[    0.473087] intel_idle: v0.4.1 model 0x5E
[    0.473208] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.473363] GHES: HEST is not enabled!
[    0.473407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.494255] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.515146] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.536037] 00:09: ttyS2 at I/O 0x3e8 (irq = 11, base_baud = 115200) is a 16550A
[    0.556952] 00:0a: ttyS3 at I/O 0x2e8 (irq = 10, base_baud = 115200) is a 16550A
[    0.557160] serial 0000:00:16.3: Couldn't register serial port 4080, irq 19, type 0, error -28
[    0.557377] Linux agpgart interface v0.103
[    0.557436] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.557436] AMD IOMMUv2 functionality not available on this system
[    0.557731] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.557732] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.557946] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.558082] mousedev: PS/2 mouse device common for all mice
[    0.558116] rtc_cmos 00:04: RTC can wake from S4
[    0.558511] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.558591] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.558595] intel_pstate: Intel P-state driver initializing
[    0.558876] intel_pstate: HWP enabled
[    0.559039] ledtrig-cpu: registered to indicate activity on CPUs
[    0.559521] NET: Registered protocol family 10
[    0.559798] mip6: Mobile IPv6
[    0.559799] NET: Registered protocol family 17
[    0.559800] mpls_gso: MPLS GSO support
[    0.559988] microcode: sig=0x506e3, pf=0x2, revision=0xc6
[    0.560163] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.560340] registered taskstats version 1
[    0.560347] zswap: loaded using pool lzo/zbud
[    0.560524] ima: No TPM chip found, activating TPM-bypass!
[    0.560525] ima: Allocated hash algorithm: sha256
[    0.561103] rtc_cmos 00:04: setting system clock to 2019-05-12 16:25:24 UTC (1557678324)
[    0.561169] PM: Hibernation image not present or could not be loaded.
[    0.746400] Freeing unused kernel memory: 1424K
[    0.746400] Write protecting the kernel read-only data: 12288k
[    0.747492] Freeing unused kernel memory: 1904K
[    0.749022] Freeing unused kernel memory: 1224K
[    0.751765] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.762188] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.762237] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.762242] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.792800] ACPI: bus type USB registered
[    0.792818] usbcore: registered new interface driver usbfs
[    0.792826] usbcore: registered new interface driver hub
[    0.792841] usbcore: registered new device driver usb
[    0.792915] SCSI subsystem initialized
[    0.793435] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.794346] libata version 3.00 loaded.
[    0.794854] pps_core: LinuxPPS API ver. 1 registered
[    0.794854] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.794965] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.794968] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.795071] PTP clock support registered
[    0.795196] dca service started, version 1.12.1
[    0.795953] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    0.795954] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.796123] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[    0.796130] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.796225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.796226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796227] usb usb1: Product: xHCI Host Controller
[    0.796228] usb usb1: Manufacturer: Linux 4.9.0-9-amd64 xhci-hcd
[    0.796229] usb usb1: SerialNumber: 0000:00:14.0
[    0.796307] hub 1-0:1.0: USB hub found
[    0.796348] hub 1-0:1.0: 16 ports detected
[    0.796956] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.796958] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.797003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.797004] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.797005] usb usb2: Product: xHCI Host Controller
[    0.797006] usb usb2: Manufacturer: Linux 4.9.0-9-amd64 xhci-hcd
[    0.797007] usb usb2: SerialNumber: 0000:00:14.0
[    0.797081] hub 2-0:1.0: USB hub found
[    0.797103] hub 2-0:1.0: 10 ports detected
[    0.797276] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.797276] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.797526] ahci 0000:00:17.0: version 3.0
[    0.800376] AVX2 version of gcm_enc/dec engaged.
[    0.800377] AES CTR mode by8 optimization enabled
[    0.807862] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x3c impl SATA mode
[    0.807864] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[    0.825222] pps pps0: new PPS source ptp0
[    0.825224] igb 0000:01:00.0: added PHC on eth0
[    0.825225] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[    0.825226] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 78:d0:04:24:c3:c5
[    0.825301] igb 0000:01:00.0: eth0: PBA No: 001300-000
[    0.825302] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[    0.825869] igb 0000:01:00.0 enp1s0: renamed from eth0
[    0.845651] scsi host0: ahci
[    0.846000] scsi host1: ahci
[    0.846263] scsi host2: ahci
[    0.846425] scsi host3: ahci
[    0.846577] scsi host4: ahci
[    0.846730] scsi host5: ahci
[    0.846762] ata1: DUMMY
[    0.846762] ata2: DUMMY
[    0.846764] ata3: SATA max UDMA/133 abar m2048@0xc114b000 port 0xc114b200 irq 129
[    0.846765] ata4: SATA max UDMA/133 abar m2048@0xc114b000 port 0xc114b280 irq 129
[    0.846769] ata5: SATA max UDMA/133 abar m2048@0xc114b000 port 0xc114b300 irq 129
[    0.846770] ata6: SATA max UDMA/133 abar m2048@0xc114b000 port 0xc114b380 irq 129
[    0.846977] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.045274] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.124580] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    1.131012] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 78:d0:04:24:c3:c4
[    1.131016] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.131080] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    1.132665] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    1.156564] ata3: SATA link down (SStatus 4 SControl 300)
[    1.156595] ata6: SATA link down (SStatus 4 SControl 300)
[    1.156631] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.156952] ata4.00: ATA-8: 2.5" SATA SSD 3IE3, S17411i, max UDMA/133
[    1.156956] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.157416] ata4.00: configured for UDMA/133
[    1.158015] scsi 3:0:0:0: Direct-Access     ATA      2.5" SATA SSD 3I 11i  PQ: 0 ANSI: 5
[    1.161646] ata5: SATA link down (SStatus 4 SControl 300)
[    1.197697] sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.197935] sd 3:0:0:0: [sda] Write Protect is off
[    1.197942] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.198115] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.200044]  sda: sda1 sda2 < sda5 >
[    1.201510] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.269391] usb 1-3: New USB device found, idVendor=046d, idProduct=c318
[    1.269396] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.269399] usb 1-3: Product: Logitech Illuminated Keyboard
[    1.269402] usb 1-3: Manufacturer: Logitech
[    1.274179] hidraw: raw HID events driver (C) Jiri Kosina
[    1.278224] usbcore: registered new interface driver usbhid
[    1.278226] usbhid: USB HID core driver
[    1.279722] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C318.0001/input/input1
[    1.337246] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3/input0
[    1.338058] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C318.0002/input/input2
[    1.388784] usb 1-4: new low-speed USB device number 3 using xhci_hcd
[    1.397209] hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3/input1
[    1.422232] PM: Starting manual resume from disk
[    1.422237] PM: Hibernation image partition 8:5 present
[    1.422239] PM: Looking for hibernation image.
[    1.422543] PM: Image not found (code -22)
[    1.422545] PM: Hibernation image not present or could not be loaded.
[    1.504586] tsc: Refined TSC clocksource calibration: 3191.995 MHz
[    1.504599] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02bffa531, max_idle_ns: 440795215709 ns
[    1.532331] usb 1-4: New USB device found, idVendor=046d, idProduct=c077
[    1.532336] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.532340] usb 1-4: Product: USB Optical Mouse
[    1.532343] usb 1-4: Manufacturer: Logitech
[    1.535026] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C077.0003/input/input3
[    1.535368] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4/input0
[    1.581334] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.607072] random: fast init done
[    1.652533] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[    1.857617] usb 1-9: New USB device found, idVendor=04e8, idProduct=6031
[    1.857621] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.857624] usb 1-9: Product: USB device
[    1.857627] usb 1-9: Manufacturer: M3  Portable
[    1.857630] usb 1-9: SerialNumber: DB9876543211163
[    1.938005] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.964447] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.964967] systemd[1]: Detected architecture x86-64.
[    1.966749] systemd[1]: Set hostname to <cilaos-centre-du-monde>.
[    1.976580] usb 1-11: new high-speed USB device number 5 using xhci_hcd
[    2.122307] usb 1-11: New USB device found, idVendor=04e8, idProduct=6860
[    2.122312] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.122315] usb 1-11: Product: SAMSUNG_Android
[    2.122319] usb 1-11: Manufacturer: SAMSUNG
[    2.122321] usb 1-11: SerialNumber: ce041714139c14060d
[    2.173889] systemd[1]: Reached target Remote File Systems.
[    2.174124] systemd[1]: Listening on Syslog Socket.
[    2.174238] systemd[1]: Listening on Journal Socket.
[    2.174430] systemd[1]: Listening on Journal Audit Socket.
[    2.174836] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.175148] systemd[1]: Created slice System Slice.
[    2.177132] systemd[1]: Starting Load Kernel Modules...
[    2.243951] lp: driver loaded but no devices found
[    2.255824] ppdev: user-space parallel port driver
[    2.295969] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.307722] systemd-journald[213]: Received request to flush runtime journal from PID 1
[    2.524768] clocksource: Switched to clocksource tsc
[    2.590285] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    2.590288] ACPI: Sleep Button [SLPB]
[    2.590319] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    2.590320] ACPI: Power Button [PWRF]
[    2.644860] wmi: Mapper loaded
[    2.663193] iTCO_vendor_support: vendor-support=0
[    2.691301] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.691332] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.691466] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.691970] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    2.693879] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.694150] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.694152] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.694154] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.694155] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.694157] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.694158] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.697461] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.702924] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.713956] [drm] Initialized
[    2.843501] [drm] Memory usable by graphics device = 4096M
[    2.843506] [drm] Replacing VGA console driver
[    2.845023] Console: switching to colour dummy device 80x25
[    2.852020] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.852023] [drm] Driver supports precise vblank timestamp query.
[    2.860998] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.871616] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[    2.871626] EDID block is all zeroes
[    2.875688] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[    2.875697] EDID block is all zeroes
[    2.879263] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[    2.879272] EDID block is all zeroes
[    2.882840] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[    2.882846] EDID block is all zeroes
[    2.882855] i915 0000:00:02.0: eDP-1: Ignoring invalid EDID block 1.
[    2.884126] [drm] GuC firmware load skipped
[    2.896210] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.896945] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    2.897211] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.897223] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    2.899742] usbcore: registered new interface driver usb-storage
[    2.900318] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[    2.901131] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[    2.910251] scsi host6: uas
[    2.910414] usbcore: registered new interface driver uas
[    2.913541] scsi 6:0:0:0: Direct-Access     Samsung  M3  Portable     8101 PQ: 0 ANSI: 6
[    2.920312] fbcon: inteldrmfb (fb0) is primary device
[    2.949121] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    2.949263] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.949267] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[    2.949805] sd 6:0:0:0: [sdb] Write Protect is off
[    2.949810] sd 6:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[    2.950102] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.950373] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[    2.952730]  sdb: sdb1
[    2.954964] sd 6:0:0:0: [sdb] Attached SCSI disk
[    2.961325] intel_rapl: Found RAPL domain package
[    2.961330] intel_rapl: Found RAPL domain core
[    2.961334] intel_rapl: Found RAPL domain uncore
[    2.961337] intel_rapl: Found RAPL domain dram
[    3.000357] Adding 8229884k swap on /dev/sda5.  Priority:-1 extents:1 across:8229884k SSFS
[    4.045703] Console: switching to colour frame buffer device 240x67
[    4.069360] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.150158] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:hp
[    4.150163] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.150167] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.150170] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.150173] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.150176] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    4.174891] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    4.175023] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    4.175153] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    4.409758] random: crng init done
[    4.409761] random: 7 urandom warning(s) missed due to ratelimiting
[    4.800858] [drm] RC6 on
[    5.447791] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    5.493323] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    5.495735] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    5.736824] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    7.165113] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[    7.165336] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   18.891051] fuse init (API version 7.26)
[   20.830320] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
[   20.961785] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
[  861.426664] usb 1-11: USB disconnect, device number 5
[  861.848969] usb 1-11: new high-speed USB device number 6 using xhci_hcd
[  861.990381] usb 1-11: New USB device found, idVendor=04e8, idProduct=6860
[  861.990384] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  861.990385] usb 1-11: Product: SAMSUNG_Android
[  861.990385] usb 1-11: Manufacturer: SAMSUNG
[  861.990386] usb 1-11: SerialNumber: **************
[ 2061.605274] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 3508.745043] perf: interrupt took too long (3164 > 3133), lowering kernel.perf_event_max_sample_rate to 63000
 

Hors ligne

#6 13-05-2019 08:29:05

jean-thevenet
Membre
Inscription : 07-05-2019

Re : Erreur DRM et "blue-tooth"

il y a ça aussi

libva-drm1:amd64                              1.7.3-2                                     amd64        Video Acceleration (VA) API for Linux -- DRM runtime
dpkg -l | grep -ie drm

ii  libdrm-amdgpu1:amd64                          2.4.74-1                                    amd64        Userspace interface to amdgpu-specific kernel DRM services -- runtime
ii  libdrm-dev:amd64                              2.4.74-1                                    amd64        Userspace interface to kernel DRM services -- development files
ii  libdrm-intel1:amd64                           2.4.74-1                                    amd64        Userspace interface to intel-specific kernel DRM services -- runtime
ii  libdrm-nouveau2:amd64                         2.4.74-1                                    amd64        Userspace interface to nouveau-specific kernel DRM services -- runtime
ii  libdrm-radeon1:amd64                          2.4.74-1                                    amd64        Userspace interface to radeon-specific kernel DRM services -- runtime
ii  libdrm2:amd64                                 2.4.74-1                                    amd64        Userspace interface to kernel DRM services -- runtime
ii  libva-drm1:amd64                              1.7.3-2                                     amd64        Video Acceleration (VA) API for Linux -- DRM runtime
 



$ lspci -nnk | egrep -iA3 "VGA"

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06)
  Subsystem: Intel Corporation HD Graphics 530 [8086:1912]
  Kernel driver in use: i915
  Kernel modules: i915


serveur X pour X.org – pilote d'affichage Intel i8xx et i9xx
Ce paquet fournit le pilote pour les familles de puces Intel i8xx et i9xx, ce qui inclut les séries i810, i815, i830, i845, i855, i865, i915, i945 et i965.

# apt-get install xserver-xorg-video-intel

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
xserver-xorg-video-intel is already the newest version (2:2.99.917+git20161206-1).





https://packages.debian.org/fr/stretch/ … ideo-intel

Ce paquet fournit également les pilotes XvMC (« XVideo Motion Compensation ») pour les puces i810/i815, i9xx et plus récentes.

Ce paquet est construit à partir du module de pilote xf86-video-intel de X.org.

L'utilisation de ce pilote est déconseillée si la version de hw est récente (à partir de 2007, environ). Il est possible de désinstaller ce pilote et laisser le serveur utiliser à la place son pilote intégré modesetting.



modesetting
(driver non accéléré)

tout cela renvoie peut être au sujet INTELgraphic UXA firefox chrome tearing, SNA lags avec VLC-mv-player

Dernière modification par jean-thevenet (13-05-2019 10:38:42)

Hors ligne

Pied de page des forums