Ça n'a rien changé.
[ 0.000000] microcode: microcode updated early to revision 0xc6, date = 2018-04-17
[ 0.000000] Linux version 4.9.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.168-1 (2019-04-12)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-amd64 root=UUID=0c350407-892c-4191-9ca6-65382f382246 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000823b1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000823b2000-0x00000000823b2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000823b3000-0x00000000823dcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000823dd000-0x000000009867efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009867f000-0x000000009af7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009af7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff900000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Neousys Technology Inc. Nuvo-5000/NVS-5000, BIOS Build170627 06/27/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff937f800fe1b0]
[ 0.000000] Base memory trampoline at [ffff937f80098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x161b34000, 0x161b34fff] PGTABLE
[ 0.000000] BRK [0x161b35000, 0x161b35fff] PGTABLE
[ 0.000000] BRK [0x161b36000, 0x161b36fff] PGTABLE
[ 0.000000] BRK [0x161b37000, 0x161b37fff] PGTABLE
[ 0.000000] BRK [0x161b38000, 0x161b38fff] PGTABLE
[ 0.000000] BRK [0x161b39000, 0x161b39fff] PGTABLE
[ 0.000000] BRK [0x161b3a000, 0x161b3afff] PGTABLE
[ 0.000000] BRK [0x161b3b000, 0x161b3bfff] PGTABLE
[ 0.000000] BRK [0x161b3c000, 0x161b3cfff] PGTABLE
[ 0.000000] BRK [0x161b3d000, 0x161b3dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35821000-0x36c07fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x000000009CFC7188 0000D4 (v01 INSYDE SKL-ULT 00000000 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFED000 0000F4 (v04 INSYDE SKL-ULT 00000000 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFCD000 01A6B5 (v02 INSYDE SKL-ULT 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CF7D000 000040
[ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 INSYDE SKL-ULT 00000002 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFF5000 0052EE (v02 INSYDE SKL-ULT 00003000 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFF4000 000034 (v01 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x000000009CFF3000 000054 (v00 INSYDE SKL-ULT 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFF2000 000622 (v02 INSYDE SKL-ULT 00000000 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF1000 0000A5 (v32 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFF0000 000034 (v07 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFEF000 000028 (v01 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFEE000 000034 (v01 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFEC000 000038 (v01 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFEB000 000094 (v01 INSYDE SKL-ULT 00000000 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFEA000 0000BC (v02 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFE9000 00003C (v01 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFE8000 000134 (v01 INSYDE SKL-ULT 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCC000 000E59 (v02 INSYDE SKL-ULT 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCB000 00019A (v02 INSYDE SKL-ULT 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCA000 000E73 (v02 INSYDE SKL-ULT 00003000 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFC9000 0000A8 (v01 INSYDE SKL-ULT 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC8000 000ABD (v01 INSYDE SKL-ULT 00001000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFC6000 000044 (v01 INSYDE SKL-ULT 00000002 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025dffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25dffb000-0x25dffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025dffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000823b1fff]
[ 0.000000] node 0: [mem 0x00000000823dd000-0x000000009867efff]
[ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025dffffff]
[ 0.000000] On node 0 totalpages: 2057714
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9690 pages used for memmap
[ 0.000000] DMA32 zone: 620117 pages, LIFO batch:31
[ 0.000000] Normal zone: 22400 pages used for memmap
[ 0.000000] Normal zone: 1433600 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x823b2000-0x823b2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x823b3000-0x823dcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9867f000-0x9af7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9af7f000-0x9cf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff8fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff900000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9381ddc00000 s105304 r8192 d29864 u524288
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2025539
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-amd64 root=UUID=0c350407-892c-4191-9ca6-65382f382246 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7997108K/8230856K available (6273K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 233748K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 3200.000 MHz processor
[ 0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.00 BogoMIPS (lpj=12768000)
[ 0.000019] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20160831
[ 0.019590] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160831/dswload-210)
[ 0.019774] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160831/psobject-238)
[ 0.019940] ACPI Exception: AE_NOT_FOUND, (SSDT: SKL-ULT) while loading table (20160831/tbxfload-228)
[ 0.021035] ACPI Error: 1 table load failures, 6 successful (20160831/tbxfload-246)
[ 0.021203] Security Framework initialized
[ 0.021203] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.021207] AppArmor: AppArmor disabled by boot time parameter
[ 0.021488] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022653] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023186] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023192] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023385] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.023386] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023389] mce: CPU supports 10 MCE banks
[ 0.023397] CPU0: Thermal monitoring enabled (TM1)
[ 0.023412] process: using mwait in idle threads
[ 0.023414] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.023414] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.023416] Spectre V2 : Mitigation: Full generic retpoline
[ 0.023416] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.023416] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.023417] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.023417] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.027188] Freeing SMP alternatives memory: 24K
[ 0.029022] ftrace: allocating 25308 entries in 99 pages
[ 0.047342] smpboot: Max logical packages: 1
[ 0.047347] DMAR: Host address width 39
[ 0.047348] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.047352] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.047352] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.047355] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.047356] DMAR: RMRR base: 0x0000009aeab000 end: 0x0000009aecafff
[ 0.047357] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[ 0.047358] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.047358] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.047359] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.047359] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.048745] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.048745] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.052741] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.092432] TSC deadline timer enabled
[ 0.092436] smpboot: CPU0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.092439] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.092465] ... version: 4
[ 0.092465] ... bit width: 48
[ 0.092465] ... generic registers: 8
[ 0.092466] ... value mask: 0000ffffffffffff
[ 0.092466] ... max period: 00007fffffffffff
[ 0.092467] ... fixed-purpose events: 3
[ 0.092467] ... event mask: 00000007000000ff
[ 0.092882] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.092957] x86: Booting SMP configuration:
[ 0.092958] .... node #0, CPUs: #1 #2 #3
[ 0.103174] x86: Booted up 1 node, 4 CPUs
[ 0.103176] smpboot: Total of 4 processors activated (25536.00 BogoMIPS)
[ 0.105736] devtmpfs: initialized
[ 0.105780] x86/mm: Memory block size: 128MB
[ 0.108069] PM: Registering ACPI NVS region [mem 0x823b2000-0x823b2fff] (4096 bytes)
[ 0.108070] PM: Registering ACPI NVS region [mem 0x9af7f000-0x9cf7efff] (33554432 bytes)
[ 0.108551] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.108556] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.108588] pinctrl core: initialized pinctrl subsystem
[ 0.108663] NET: Registered protocol family 16
[ 0.121547] cpuidle: using governor ladder
[ 0.137560] cpuidle: using governor menu
[ 0.137639] Simple Boot Flag at 0x44 set to 0x1
[ 0.137654] ACPI: bus type PCI registered
[ 0.137654] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.137707] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.137708] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.137711] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
[ 0.137763] PCI: Using configuration type 1 for base access
[ 0.153704] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.153705] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.153874] ACPI: Added _OSI(Module Device)
[ 0.153875] ACPI: Added _OSI(Processor Device)
[ 0.153875] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153876] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.154767] ACPI: Executed 17 blocks of module-level executable AML code
[ 0.161992] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.164336] ACPI: Dynamic OEM Table Load:
[ 0.164410] ACPI: SSDT 0xFFFF9381D3A1A000 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20160108)
[ 0.164632] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.165652] ACPI: Dynamic OEM Table Load:
[ 0.165657] ACPI: SSDT 0xFFFF9381D3FA5800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20160108)
[ 0.166280] ACPI: Dynamic OEM Table Load:
[ 0.166286] ACPI: SSDT 0xFFFF9381D3A1A800 0005AA (v02 PmRef ApIst 00003000 INTL 20160108)
[ 0.166730] ACPI: Dynamic OEM Table Load:
[ 0.166736] ACPI: SSDT 0xFFFF9381D3840C00 000119 (v02 PmRef ApCst 00003000 INTL 20160108)
[ 0.168388] ACPI: Interpreter enabled
[ 0.168422] ACPI: (supports S0 S3 S4 S5)
[ 0.168422] ACPI: Using IOAPIC for interrupt routing
[ 0.168450] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.168895] ACPI: Power Resource [PG00] (on)
[ 0.169198] ACPI: Power Resource [PG01] (on)
[ 0.169492] ACPI: Power Resource [PG02] (on)
[ 0.181901] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 0.183271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.183275] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.185583] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.187125] PCI host bridge to bus 0000:00
[ 0.187126] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.187127] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.187128] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.187129] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window]
[ 0.187130] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.187131] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.187137] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.187746] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.187753] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[ 0.187758] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.187761] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.188434] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.188450] pci 0000:00:14.0: reg 0x10: [mem 0xc1120000-0xc112ffff 64bit]
[ 0.188507] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.189144] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.189201] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.189231] pci 0000:00:16.0: reg 0x10: [mem 0xc114a000-0xc114afff 64bit]
[ 0.189338] pci 0000:00:16.0: PME# supported from D3hot
[ 0.189968] pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
[ 0.189984] pci 0000:00:16.3: reg 0x10: [io 0x4080-0x4087]
[ 0.189994] pci 0000:00:16.3: reg 0x14: [mem 0xc114e000-0xc114efff]
[ 0.190667] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.190679] pci 0000:00:17.0: reg 0x10: [mem 0xc1148000-0xc1149fff]
[ 0.190685] pci 0000:00:17.0: reg 0x14: [mem 0xc114d000-0xc114d0ff]
[ 0.190691] pci 0000:00:17.0: reg 0x18: [io 0x4088-0x408f]
[ 0.190697] pci 0000:00:17.0: reg 0x1c: [io 0x4090-0x4093]
[ 0.190703] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.190709] pci 0000:00:17.0: reg 0x24: [mem 0xc114b000-0xc114b7ff]
[ 0.190743] pci 0000:00:17.0: PME# supported from D3hot
[ 0.191366] pci 0000:00:1c.0: [8086:a112] type 01 class 0x060400
[ 0.191417] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.192028] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.192083] pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100
[ 0.192784] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.192794] pci 0000:00:1f.2: reg 0x10: [mem 0xc1144000-0xc1147fff]
[ 0.193451] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.193471] pci 0000:00:1f.3: reg 0x10: [mem 0xc1140000-0xc1143fff 64bit]
[ 0.193500] pci 0000:00:1f.3: reg 0x20: [mem 0xc1130000-0xc113ffff 64bit]
[ 0.193545] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.194168] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.194201] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.194247] pci 0000:00:1f.4: reg 0x10: [mem 0xc114c000-0xc114c0ff 64bit]
[ 0.194316] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f]
[ 0.195004] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[ 0.195024] pci 0000:00:1f.6: reg 0x10: [mem 0xc1100000-0xc111ffff]
[ 0.195128] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.195723] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 0.195799] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000
[ 0.195820] pci 0000:01:00.0: reg 0x10: [mem 0xc1000000-0xc107ffff]
[ 0.195844] pci 0000:01:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.195856] pci 0000:01:00.0: reg 0x1c: [mem 0xc1080000-0xc1083fff]
[ 0.195973] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.196021] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.205633] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.205640] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.205659] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc10fffff]
[ 0.206820] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.206862] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.206902] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.206941] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.206980] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.207019] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.207059] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.207099] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.207263] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.207332] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.207333] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.207335] vgaarb: loaded
[ 0.207336] vgaarb: bridge control possible 0000:00:02.0
[ 0.207375] PCI: Using ACPI for IRQ routing
[ 0.214270] PCI: pci_cache_line_size set to 64 bytes
[ 0.214306] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.214307] e820: reserve RAM buffer [mem 0x823b2000-0x83ffffff]
[ 0.214308] e820: reserve RAM buffer [mem 0x9867f000-0x9bffffff]
[ 0.214308] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.214309] e820: reserve RAM buffer [mem 0x25e000000-0x25fffffff]
[ 0.214450] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.214454] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.216494] clocksource: Switched to clocksource hpet
[ 0.220934] VFS: Disk quotas dquot_6.6.0
[ 0.220950] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.221004] pnp: PnP ACPI init
[ 0.221106] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.221107] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.221108] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.221109] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.221110] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.221112] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.221113] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.221115] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221337] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.221338] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221434] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.221435] system 00:02: [io 0xffff] has been reserved
[ 0.221436] system 00:02: [io 0xffff] has been reserved
[ 0.221437] system 00:02: [io 0xffff] has been reserved
[ 0.221439] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.221440] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.221441] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221507] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.221508] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221525] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.221552] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.221554] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.221580] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.221831] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.222053] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.222273] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.222493] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.223434] system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.223435] system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.223436] system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.223438] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223834] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.223835] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.223836] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.223837] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.223838] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.223840] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.223841] system 00:0c: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.223842] system 00:0c: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.223843] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.223844] system 00:0c: [mem 0xa0000000-0xa001ffff] has been reserved
[ 0.223846] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224005] pnp: PnP ACPI: found 13 devices
[ 0.230699] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.230709] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.230711] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.230713] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc10fffff]
[ 0.230719] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.230720] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.230721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.230722] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xefffffff window]
[ 0.230723] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.230724] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.230724] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc10fffff]
[ 0.230851] NET: Registered protocol family 2
[ 0.230964] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.231049] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.231181] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.231199] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.231218] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.231262] NET: Registered protocol family 1
[ 0.231270] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.232706] PCI: CLS 64 bytes, default 64
[ 0.232732] Unpacking initramfs...
[ 0.471120] Freeing initrd memory: 20380K
[ 0.471167] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.471169] software IO TLB: mapped [mem 0x9467f000-0x9867f000] (64MB)
[ 0.471423] audit: initializing netlink subsys (disabled)
[ 0.471435] audit: type=2000 audit(1557678324.468:1): initialized
[ 0.471798] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.471860] zbud: loaded
[ 0.472762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.472794] io scheduler noop registered
[ 0.472795] io scheduler deadline registered
[ 0.472806] io scheduler cfq registered (default)
[ 0.473057] aer 0000:00:1c.0:pcie002: service driver aer loaded
[ 0.473066] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.473067] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.473069] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.473074] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.473077] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.473086] intel_idle: MWAIT substates: 0x142120
[ 0.473087] intel_idle: v0.4.1 model 0x5E
[ 0.473208] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.473363] GHES: HEST is not enabled!
[ 0.473407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.494255] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.515146] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.536037] 00:09: ttyS2 at I/O 0x3e8 (irq = 11, base_baud = 115200) is a 16550A
[ 0.556952] 00:0a: ttyS3 at I/O 0x2e8 (irq = 10, base_baud = 115200) is a 16550A
[ 0.557160] serial 0000:00:16.3: Couldn't register serial port 4080, irq 19, type 0, error -28
[ 0.557377] Linux agpgart interface v0.103
[ 0.557436] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.557436] AMD IOMMUv2 functionality not available on this system
[ 0.557731] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.557732] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.557946] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.558082] mousedev: PS/2 mouse device common for all mice
[ 0.558116] rtc_cmos 00:04: RTC can wake from S4
[ 0.558511] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.558591] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.558595] intel_pstate: Intel P-state driver initializing
[ 0.558876] intel_pstate: HWP enabled
[ 0.559039] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.559521] NET: Registered protocol family 10
[ 0.559798] mip6: Mobile IPv6
[ 0.559799] NET: Registered protocol family 17
[ 0.559800] mpls_gso: MPLS GSO support
[ 0.559988] microcode: sig=0x506e3, pf=0x2, revision=0xc6
[ 0.560163] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.560340] registered taskstats version 1
[ 0.560347] zswap: loaded using pool lzo/zbud
[ 0.560524] ima: No TPM chip found, activating TPM-bypass!
[ 0.560525] ima: Allocated hash algorithm: sha256
[ 0.561103] rtc_cmos 00:04: setting system clock to 2019-05-12 16:25:24 UTC (1557678324)
[ 0.561169] PM: Hibernation image not present or could not be loaded.
[ 0.746400] Freeing unused kernel memory: 1424K
[ 0.746400] Write protecting the kernel read-only data: 12288k
[ 0.747492] Freeing unused kernel memory: 1904K
[ 0.749022] Freeing unused kernel memory: 1224K
[ 0.751765] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.762188] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.762237] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.762242] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.792800] ACPI: bus type USB registered
[ 0.792818] usbcore: registered new interface driver usbfs
[ 0.792826] usbcore: registered new interface driver hub
[ 0.792841] usbcore: registered new device driver usb
[ 0.792915] SCSI subsystem initialized
[ 0.793435] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.794346] libata version 3.00 loaded.
[ 0.794854] pps_core: LinuxPPS API ver. 1 registered
[ 0.794854] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.794965] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.794968] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.795071] PTP clock support registered
[ 0.795196] dca service started, version 1.12.1
[ 0.795953] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 0.795954] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.796123] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[ 0.796130] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.796225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.796226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.796227] usb usb1: Product: xHCI Host Controller
[ 0.796228] usb usb1: Manufacturer: Linux 4.9.0-9-amd64 xhci-hcd
[ 0.796229] usb usb1: SerialNumber: 0000:00:14.0
[ 0.796307] hub 1-0:1.0: USB hub found
[ 0.796348] hub 1-0:1.0: 16 ports detected
[ 0.796956] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.796958] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.797003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.797004] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.797005] usb usb2: Product: xHCI Host Controller
[ 0.797006] usb usb2: Manufacturer: Linux 4.9.0-9-amd64 xhci-hcd
[ 0.797007] usb usb2: SerialNumber: 0000:00:14.0
[ 0.797081] hub 2-0:1.0: USB hub found
[ 0.797103] hub 2-0:1.0: 10 ports detected
[ 0.797276] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.797276] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.797526] ahci 0000:00:17.0: version 3.0
[ 0.800376] AVX2 version of gcm_enc/dec engaged.
[ 0.800377] AES CTR mode by8 optimization enabled
[ 0.807862] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x3c impl SATA mode
[ 0.807864] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.825222] pps pps0: new PPS source ptp0
[ 0.825224] igb 0000:01:00.0: added PHC on eth0
[ 0.825225] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 0.825226] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 78:d0:04:24:c3:c5
[ 0.825301] igb 0000:01:00.0: eth0: PBA No: 001300-000
[ 0.825302] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 0.825869] igb 0000:01:00.0 enp1s0: renamed from eth0
[ 0.845651] scsi host0: ahci
[ 0.846000] scsi host1: ahci
[ 0.846263] scsi host2: ahci
[ 0.846425] scsi host3: ahci
[ 0.846577] scsi host4: ahci
[ 0.846730] scsi host5: ahci
[ 0.846762] ata1: DUMMY
[ 0.846762] ata2: DUMMY
[ 0.846764] ata3: SATA max UDMA/133 abar m2048@0xc114b000 port 0xc114b200 irq 129
[ 0.846765] ata4: SATA max UDMA/133 abar m2048@0xc114b000 port 0xc114b280 irq 129
[ 0.846769] ata5: SATA max UDMA/133 abar m2048@0xc114b000 port 0xc114b300 irq 129
[ 0.846770] ata6: SATA max UDMA/133 abar m2048@0xc114b000 port 0xc114b380 irq 129
[ 0.846977] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.045274] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.124580] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.131012] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 78:d0:04:24:c3:c4
[ 1.131016] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.131080] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.132665] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1.156564] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.156595] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.156631] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.156952] ata4.00: ATA-8: 2.5" SATA SSD 3IE3, S17411i, max UDMA/133
[ 1.156956] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.157416] ata4.00: configured for UDMA/133
[ 1.158015] scsi 3:0:0:0: Direct-Access ATA 2.5" SATA SSD 3I 11i PQ: 0 ANSI: 5
[ 1.161646] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.197697] sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.197935] sd 3:0:0:0: [sda] Write Protect is off
[ 1.197942] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.198115] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.200044] sda: sda1 sda2 < sda5 >
[ 1.201510] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.269391] usb 1-3: New USB device found, idVendor=046d, idProduct=c318
[ 1.269396] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.269399] usb 1-3: Product: Logitech Illuminated Keyboard
[ 1.269402] usb 1-3: Manufacturer: Logitech
[ 1.274179] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.278224] usbcore: registered new interface driver usbhid
[ 1.278226] usbhid: USB HID core driver
[ 1.279722] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C318.0001/input/input1
[ 1.337246] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3/input0
[ 1.338058] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C318.0002/input/input2
[ 1.388784] usb 1-4: new low-speed USB device number 3 using xhci_hcd
[ 1.397209] hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3/input1
[ 1.422232] PM: Starting manual resume from disk
[ 1.422237] PM: Hibernation image partition 8:5 present
[ 1.422239] PM: Looking for hibernation image.
[ 1.422543] PM: Image not found (code -22)
[ 1.422545] PM: Hibernation image not present or could not be loaded.
[ 1.504586] tsc: Refined TSC clocksource calibration: 3191.995 MHz
[ 1.504599] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02bffa531, max_idle_ns: 440795215709 ns
[ 1.532331] usb 1-4: New USB device found, idVendor=046d, idProduct=c077
[ 1.532336] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.532340] usb 1-4: Product: USB Optical Mouse
[ 1.532343] usb 1-4: Manufacturer: Logitech
[ 1.535026] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C077.0003/input/input3
[ 1.535368] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4/input0
[ 1.581334] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.607072] random: fast init done
[ 1.652533] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[ 1.857617] usb 1-9: New USB device found, idVendor=04e8, idProduct=6031
[ 1.857621] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.857624] usb 1-9: Product: USB device
[ 1.857627] usb 1-9: Manufacturer: M3 Portable
[ 1.857630] usb 1-9: SerialNumber: DB9876543211163
[ 1.938005] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.964447] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.964967] systemd[1]: Detected architecture x86-64.
[ 1.966749] systemd[1]: Set hostname to <cilaos-centre-du-monde>.
[ 1.976580] usb 1-11: new high-speed USB device number 5 using xhci_hcd
[ 2.122307] usb 1-11: New USB device found, idVendor=04e8, idProduct=6860
[ 2.122312] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.122315] usb 1-11: Product: SAMSUNG_Android
[ 2.122319] usb 1-11: Manufacturer: SAMSUNG
[ 2.122321] usb 1-11: SerialNumber: ce041714139c14060d
[ 2.173889] systemd[1]: Reached target Remote File Systems.
[ 2.174124] systemd[1]: Listening on Syslog Socket.
[ 2.174238] systemd[1]: Listening on Journal Socket.
[ 2.174430] systemd[1]: Listening on Journal Audit Socket.
[ 2.174836] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.175148] systemd[1]: Created slice System Slice.
[ 2.177132] systemd[1]: Starting Load Kernel Modules...
[ 2.243951] lp: driver loaded but no devices found
[ 2.255824] ppdev: user-space parallel port driver
[ 2.295969] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.307722] systemd-journald[213]: Received request to flush runtime journal from PID 1
[ 2.524768] clocksource: Switched to clocksource tsc
[ 2.590285] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 2.590288] ACPI: Sleep Button [SLPB]
[ 2.590319] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.590320] ACPI: Power Button [PWRF]
[ 2.644860] wmi: Mapper loaded
[ 2.663193] iTCO_vendor_support: vendor-support=0
[ 2.691301] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.691332] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.691466] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 2.691970] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 2.693879] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.694150] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.694152] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.694154] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.694155] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.694157] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.694158] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.697461] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.702924] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.713956] [drm] Initialized
[ 2.843501] [drm] Memory usable by graphics device = 4096M
[ 2.843506] [drm] Replacing VGA console driver
[ 2.845023] Console: switching to colour dummy device 80x25
[ 2.852020] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.852023] [drm] Driver supports precise vblank timestamp query.
[ 2.860998] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.871616] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[ 2.871626] EDID block is all zeroes
[ 2.875688] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[ 2.875697] EDID block is all zeroes
[ 2.879263] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[ 2.879272] EDID block is all zeroes
[ 2.882840] [drm:drm_edid_block_valid [drm]] *ERROR* EDID has major version 0, instead of 1
[ 2.882846] EDID block is all zeroes
[ 2.882855] i915 0000:00:02.0: eDP-1: Ignoring invalid EDID block 1.
[ 2.884126] [drm] GuC firmware load skipped
[ 2.896210] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.896945] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.897211] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.897223] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 2.899742] usbcore: registered new interface driver usb-storage
[ 2.900318] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[ 2.901131] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[ 2.910251] scsi host6: uas
[ 2.910414] usbcore: registered new interface driver uas
[ 2.913541] scsi 6:0:0:0: Direct-Access Samsung M3 Portable 8101 PQ: 0 ANSI: 6
[ 2.920312] fbcon: inteldrmfb (fb0) is primary device
[ 2.949121] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 2.949263] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2.949267] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 2.949805] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.949810] sd 6:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[ 2.950102] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.950373] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 2.952730] sdb: sdb1
[ 2.954964] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.961325] intel_rapl: Found RAPL domain package
[ 2.961330] intel_rapl: Found RAPL domain core
[ 2.961334] intel_rapl: Found RAPL domain uncore
[ 2.961337] intel_rapl: Found RAPL domain dram
[ 3.000357] Adding 8229884k swap on /dev/sda5. Priority:-1 extents:1 across:8229884k SSFS
[ 4.045703] Console: switching to colour frame buffer device 240x67
[ 4.069360] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.150158] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:hp
[ 4.150163] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.150167] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.150170] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.150173] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.150176] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.174891] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 4.175023] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 4.175153] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 4.409758] random: crng init done
[ 4.409761] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.800858] [drm] RC6 on
[ 5.447791] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 5.493323] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 5.495735] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 5.736824] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 7.165113] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 7.165336] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 18.891051] fuse init (API version 7.26)
[ 20.830320] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
[ 20.961785] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
[ 861.426664] usb 1-11: USB disconnect, device number 5
[ 861.848969] usb 1-11: new high-speed USB device number 6 using xhci_hcd
[ 861.990381] usb 1-11: New USB device found, idVendor=04e8, idProduct=6860
[ 861.990384] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 861.990385] usb 1-11: Product: SAMSUNG_Android
[ 861.990385] usb 1-11: Manufacturer: SAMSUNG
[ 861.990386] usb 1-11: SerialNumber: **************
[ 2061.605274] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 3508.745043] perf: interrupt took too long (3164 > 3133), lowering kernel.perf_event_max_sample_rate to 63000
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
se considère dans un "laptop" sans reconnaître d'écran externe, ce qui impose automatiquement le 60Hz et rien d'autre comme fréquence d'image (donc compatible seulement avec les médias NTSC). 