logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 03-02-2019 13:50:04

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Lamentable installation de Stretch.

Bonjour à tous smile

Je me suis lamentablement planté sur l'installe de Stretch, sur ce Pavilion HP : https://support.hp.com/fr-fr/document/c05300962

C'était lent, lourd, jamais vus ça sous Stretch en XFCE.
J'ai tenté le coup avec Ubuntu 16.04. Là aussi, forcément, c'est lent. Mais surtout, j'avais de gros problèmes de plantages.
Pendant l'utilisation, au reboot après image CloneZila, etc.

Je pense avoir identifié le problème.
C'est la carte WiFi Realtek.

lspci retourne :


00:00.0 Host bridge: Intel Corporation Device 5904 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Device 5916 (rev 02)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 02)
00:08.0 System peripheral: Intel Corporation Sky Lake Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Device 9d10 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1f.0 ISA bridge: Intel Corporation Device 9d58 (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330] (rev 83)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
03:00.0 [g]Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter[/g]
 



J'ai recommencé ce matin.
Mes recherches m'ont conduit à ces adresses :

Un /home séparé (sur un seul dd, ouais...). C'est idem.
https://noof.ovh/installer-le-pilote-po … u-kubuntu/
https://angristan.fr/corriger-le-proble … rtl8723be/
https://angristan.fr/resoudre-problemes … 3be-linux/

Cette fichue carte Wifi est-lle réellement incompatible avec Linux ?
Chez Realtek, je ne vois pas de driver pour Linux.

J'aimerais votre avis.
Merci wink

Hors ligne

#2 03-02-2019 14:08:53

raleur
Membre
Inscription : 03-10-2014

Re : Lamentable installation de Stretch.

Le plantage lamentable, c'est de vouloir utiliser un Pavilion.

Lupa a écrit :

Je pense avoir identifié le problème.
C'est la carte WiFi Realtek.


Qu'est-ce qui te fait penser cela ?
Elle marche ou pas ?
Machine récente ? Tu as regardé du côté du GPU Intel qui n'est pas identifié par lspci, donc peut-être trop récent ou exotique pour les pilotes graphiques de Stretch.
EDIT : Non, l'identifiant PCI est bien listé dans les alias du module i915 du noyau 4.9.

Lupa a écrit :

Un /home séparé (sur un seul dd, ouais...). C'est idem.


Evidemment. Le partitionnement n'a pas d'influence significative sur la rapidité du système.

Dernière modification par raleur (03-02-2019 14:14:10)


Il vaut mieux montrer que raconter.

Hors ligne

#3 03-02-2019 14:30:17

anonyme
Invité

Re : Lamentable installation de Stretch.

et celle ci ?


 Carte graphique
 
Carte graphique AMD Radeon™ R5 M430 (2 Go de mémoire DDR3 dédiée)
 



et celle la


00:02.0 VGA compatible controller: Intel Corporation Device 5916 (rev 02)
 



pour finir


01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330] (rev 83)
 



il te faut le firmware AMD => firmware-amd-graphics
tu peu fonctionner en libre mais ne me demande pas comment fonctionne un portable avec 2 gpu intel + amd  , je connais pas roll

pour celui ci


Intel® Core™ i5-7200U (2,5 GHz, jusqu'à 3,1 GHz, 3 Mo de mémoire cache, 2 cœurs)
 


tester avec le noyau des backports et le firmware intel => firmware-misc-nonfree ( pas sur que le noyau 4.9 et mesa13 prenne bien en charge le gpu intel de génération 7 en mobile ).
au pire fait directement un test en testing , par contre renseigne toi sur la prise en charge de deux gpu "intel + amd" sous debian

Dernière modification par anonyme (03-02-2019 15:01:26)

#4 03-02-2019 15:54:23

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

@raleur : oui, la carte wifi fonctionne. Mais j'ai vu des tas de sujets sur différents forums : cette carte faisait foirer des bécanes Linux. C'est donc elle que je soupçonne.

@anonyme : oui, j'ai les paquets pour la cg Radeon. Pour l'Intel, là...

Mon sources.list pour mes deux bécanes sous Stretch :


deb http://ftp.fr.debian.org/debian/ stretch main
deb-src http://ftp.fr.debian.org/debian/ stretch main

deb http://security.debian.org/debian-security stretch/updates main contrib non-free
deb-src http://security.debian.org/debian-security stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free
deb-src http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free

# -------- Pr WebMin ----------
deb http://download.webmin.com/download/repository sarge contrib

# --------- Pr Virtual Box ----
deb http://download.virtualbox.org/virtualbox/debian stretch contrib
 



Je vais voir la syntaxe pour introduire les backports.

Je donne le retour wink

Hors ligne

#5 03-02-2019 16:03:22

raleur
Membre
Inscription : 03-10-2014

Re : Lamentable installation de Stretch.

Pourquoi les sections contrib et non-free sont-elle activées sur les dépôts de sécurité et mises à jour mais pas sur le dépôt principal ?

Lupa a écrit :

oui, la carte wifi fonctionne. Mais j'ai vu des tas de sujets sur différents forums : cette carte faisait foirer des bécanes Linux. C'est donc elle que je soupçonne.


Et tu as essayé de la désactiver pour voir ce que ça donne ?

Dernière modification par raleur (03-02-2019 16:03:46)


Il vaut mieux montrer que raconter.

Hors ligne

#6 03-02-2019 17:05:23

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Ca tousse !
Il semblerait que j'aie des doublons dans mon sources.list. Le voici :


deb http://ftp.fr.debian.org/debian/ stretch main
deb-src http://ftp.fr.debian.org/debian/ stretch main

deb http://security.debian.org/debian-security stretch/updates main contrib
#deb-src http://security.debian.org/debian-security stretch/updates main contrib

deb http://security.debian.org/debian-security stretch/updates main contrib non-free
#deb-src http://security.debian.org/debian-security stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
#deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib
#deb-src http://ftp.fr.debian.org/debian/ stretch-updates main contrib

# -------- Pr WebMin ----------
#deb http://download.webmin.com/download/repository sarge contrib

 



Quant aux backports, quelle est la syntaxe ?
J'ai les paquets suivants :
firmware-linux-nonfree_20161130-4_all.deb  ==>> pas pu l'installer.


dpkg -i  firmware-linux-nonfree_20161130-4_all.deb
 



root@martin-deb:~/Téléchargements#

dpkg -i firmware-linux-nonfree_20161130-4_all.deb


Sélection du paquet firmware-linux-nonfree précédemment désélectionné.
(Lecture de la base de données... 96549 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de firmware-linux-nonfree_20161130-4_all.deb ...
Dépaquetage de firmware-linux-nonfree (20161130-4) ...
dpkg: des problèmes de dépendances empêchent la configuration de firmware-linux-nonfree :
 firmware-linux-nonfree dépend de firmware-misc-nonfree (= 20161130-4) ; cependant :
  Le paquet firmware-misc-nonfree n'est pas installé.
 firmware-linux-nonfree dépend de firmware-amd-graphics (= 20161130-4) ; cependant :
  Le paquet firmware-amd-graphics n'est pas installé.

dpkg: erreur de traitement du paquet firmware-linux-nonfree (--install) :
 problèmes de dépendances - laissé non configuré
Des erreurs ont été rencontrées pendant l'exécution :
 firmware-linux-nonfree

 



Puis

root@martin-deb:~/Téléchargements#

apt-get install -f


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Correction des dépendances... Fait
Les paquets suivants seront ENLEVÉS :
  firmware-linux-nonfree
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
1 partiellement installés ou enlevés.
Après cette opération, 20,5 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] n
Annulation.

 



xserver-xorg-video-intel_2.99.917+git20161206-1_amd64.deb : OK
mxserver-xorg-video-radeon_7.8.0-1+b1_amd64.deb : OK

Pour les backports, ça y est. Merci au wiki Debian wink
@raleur : non. Pas encore désactivé la carte wifi. Mais le microcode Intel, effectivement, Synaptic ne l'installe pas : il manque un paquet quelque part. J'aurais dû le noter. Là, je fais une image avant d'aller plus loin.

Edit à toto : Modif faite - BBCode forum séparation de la commande root de son retour.

Dernière modification par Lupa (03-02-2019 17:22:46)

Hors ligne

#7 03-02-2019 17:29:25

raleur
Membre
Inscription : 03-10-2014

Re : Lamentable installation de Stretch.

Le microcode Intel est pour le CPU, rien à voir avec un firmware pour GPU ou carte réseau.

Ton sources.list a des doublons pour security, mais en plus il est incohérent : certains lignes ont non-free et contrib, d'autres non.

Il vaut mieux montrer que raconter.

Hors ligne

#8 03-02-2019 18:30:59

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Bon. J'ai réglé des trucs.
Notamment le sources.list.

C'est au démarrage que l'OS m'indique qu'il y a un problème avec la carte WiFi. Et aussi celle bluetooth. D'où mon idée que c'est l'une d'elles qui pose problème.
Il m'a fait faire un


apt --fix -broken install
 



Le microcode Intel est passé (le CPU, oui, bien sûr). La Radeon aussi. Me reste la carte graphique Intel et la bluetooth. Mais j'hésite à installer cette dernière : énormes ressources réseaux !

Le sources.list :


deb http://ftp.fr.debian.org/debian/ stretch main
deb-src http://ftp.fr.debian.org/debian/ stretch main

deb http://security.debian.org/debian-security stretch/updates main contrib
#deb-src http://security.debian.org/debian-security stretch/updates main contrib

#deb http://security.debian.org/debian-security stretch/updates main contrib non-free
#deb-src http://security.debian.org/debian-security stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
#deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib
#deb-src http://ftp.fr.debian.org/debian/ stretch-updates main contrib

# Backports repository
deb http://deb.debian.org/debian stretch-backports main contrib non-free # disponible après la publication de stretch
#deb http://deb.debian.org/debian stretch-backports-sloppy main contrib non-free #

# -------- Pr WebMin ----------
#deb http://download.webmin.com/download/repository sarge contrib

 


Il reste une incohérence ? Je maîtrise mal cette syntaxe...

Hors ligne

#9 03-02-2019 18:40:33

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : Lamentable installation de Stretch.

bonsoir Lupa ,

pour ton sources.list , tu peux t'inspirer de celui ci :

https://debian-facile.org/doc:systeme:a … st:stretch

https://debian-facile.org/doc:systeme:a … st-via-cat


# Debian Stretch, dépôt principal + paquets non libres
deb http://deb.debian.org/debian/ stretch main contrib non-free
# Debian Stretch, mises à jour de sécurité + paquets non libres
deb http://security.debian.org/ stretch/updates main contrib non-free
# Debian Stretch, mises à jour "volatiles" + paquets non libres
deb http://deb.debian.org/debian/ stretch-updates main contrib non-free
# Debian Stretch, dépôt de rétroportages ("backports")
deb http://deb.debian.org/debian/ stretch-backports main contrib non-free
 



ce sera déjà plus clair pour toi . enfin , j'espère .

n'oublie pas , une fois le sources.list modifié :

apt update
et éventuellement ,
apt upgrade

Dernière modification par Debian Alain (03-02-2019 18:49:08)

Hors ligne

#10 03-02-2019 18:50:10

raleur
Membre
Inscription : 03-10-2014

Re : Lamentable installation de Stretch.

Il reste toujours l'incohérence entre les lignes avec et sans contrib et non-free.

Il vaut mieux montrer que raconter.

Hors ligne

#11 03-02-2019 19:14:55

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : Lamentable installation de Stretch.

normalement , c'est sur tous les dépôts qu'on modifie le "main contrib non-free" , pas sur un et pas l'autre ...

enfin , j'ai jamais vu ...

qu'en pense râleur ???

Hors ligne

#12 04-02-2019 10:01:05

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Bonjour à tous smile

Je commence à avoir des doutes sur le hardware, là.
Il me suffit d'éjecter un dd externe avec Thunar, par exemple, pour que tout plante. Redémarrage par le bouton power.
Après une image, je tente une install de Windows 8.1 64. Il devrait démarrer plus vite qu'avec Seven, par exemple. Si, là aussi, il rame, c'est que quelque chose n'est pas normal.

Merci pour les sources.list wink Je prends note.
Et je donne le retour.

Hors ligne

#13 05-02-2019 13:30:44

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Ouais...
Sous Windows 8, il était nettement plus véloce et surtout stable.
Je suis reparti sous Ubuntu 18.04 : il n'y a pas photo. Idem que Windows 8.
J'ai beaucoup à apprendre sur les noyaux... Là, ce n'est pas juste une question de drivers. Ou alors : je les ai mal installés ?

Vu que c'est un matériel assez récent, c'est ce qui me fait peur au sujet de la tour que je vais faire monter. Socket 1151...

Où est-ce que j'ai pu me gourer comme ça ?

Hors ligne

#14 05-02-2019 14:33:48

Herve33
Membre
Lieu : Mérignac 33
Distrib. : Debian 12 Xfce
Inscription : 21-09-2016

Re : Lamentable installation de Stretch.

Lupa a écrit :


Je suis reparti sous Ubuntu 18.04 : il n'y a pas photo. Idem que Windows 8.


Ubuntu ou Xubuntu ?


Acer Aspire 5733 - Debian 12 Xfce

Hors ligne

#15 05-02-2019 14:42:10

Allain
Membre
Distrib. : Jessie 8.11 (VM) / Stretch 9.7 (VM) / Jessie 8.5 (
Noyau : Il changera encore
(G)UI : Gnome 3
Inscription : 30-07-2016

Re : Lamentable installation de Stretch.

Debian Alain a écrit :

normalement , c'est sur tous les dépôts qu'on modifie le "main contrib non-free" , pas sur un et pas l'autre ...
enfin , j'ai jamais vu ...




Je pense que tu peux trouver la reponse ici wink
https://wiki.debian.org/fr/SourcesList

Dernière modification par Allain (05-02-2019 14:43:23)

Hors ligne

#16 05-02-2019 16:26:36

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Bonjour.
Ubuntu 18.04 LTS.
Tu penses que Debian plantait seulement à cause de ce sources.list ?

Hors ligne

#17 05-02-2019 16:33:35

Allain
Membre
Distrib. : Jessie 8.11 (VM) / Stretch 9.7 (VM) / Jessie 8.5 (
Noyau : Il changera encore
(G)UI : Gnome 3
Inscription : 30-07-2016

Re : Lamentable installation de Stretch.

Lupa a écrit :

Ubuntu 18.04 LTS.
Tu penses que Debian plantait seulement à cause de ce sources.list ?



Celui-ci alors
https://doc.ubuntu-fr.org/sources.list

Hors ligne

#18 05-02-2019 23:58:21

David5647
Membre
Distrib. : Debian Sid
Noyau : 5.15.0-2-amd64
(G)UI : i3wm + des bouts de kde
Inscription : 27-08-2017

Re : Lamentable installation de Stretch.

anonyme a écrit :

au pire fait directement un test en testing , par contre renseigne toi sur la prise en charge de deux gpu "intel + amd" sous debian


Tu as essayé? Kernel 4.19 pour testing

Hors ligne

#19 06-02-2019 10:03:33

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Bonjour à tous smile
Non, pas essayé le 4.19 .
J'ai installé avec l' ISO 9?7. Un Dvd 9.7 : "debian-9.7.0-amd64-DVD-1.jigdo" . Ici : https://cdimage.debian.org/debian-cd/cu … jigdo-dvd/
C'est une erreur ?
Il y a d'ailleurs souvent plusieurs DVD : DVD1, DVD2...
Lequel choisir ? 
Ca m'arrangerait bien de tout recommencer avec un Debian bien fourni en pilotes ! wink

Sous Ubuntu 18.04:


uname -a
4.15.0-45-generic #48Ubuntu
 

Dernière modification par Lupa (06-02-2019 10:05:13)

Hors ligne

#20 06-02-2019 10:19:05

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : Lamentable installation de Stretch.

en général , le dvd 1 contient l'essentiel de ce que l'on a besoin .

enfin , pour les besoins les plus courants .

mais tu sera rarement pris en défaut avec .

Ca m'arrangerait bien de tout recommencer avec un Debian bien fourni en pilotes !


je m'en doute ! et comment !

Dernière modification par Debian Alain (06-02-2019 10:20:07)

Hors ligne

#21 06-02-2019 11:06:13

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Donc, mieux vaudrait télécharger toutes ces ISO et, durant la réinstallation, les insérer sous forme de DVD, lorsque le programme d'installation demande des pilotes ? Pas mal... C'est bien ça ?

Parce que, après tout, il y a bien des gens travaillant sous Stretch avec du matériel récent ? Forcément !
Cf. mon sujet, ici : https://debian-facile.org/viewtopic.php?id=23649

Dernière modification par Lupa (06-02-2019 11:07:29)

Hors ligne

#22 06-02-2019 11:48:55

smolski
quasi...modo
Lieu : AIN
Distrib. : backports (buster) 10
Noyau : Linux 4.19.0-8-amd64
(G)UI : gnome
Inscription : 21-10-2008

Re : Lamentable installation de Stretch.

@Lupa
La démarche est d'installer d'abord avec une iso net install.
Pour un pc avec du matériel récent, on peut utiliser une iso avec des firmawres non-free qui peuvent faire l'affaire.
Voici l'iso dans le lien :
http://cdimage.debian.org/cdimage/unoff … 64/iso-cd/

Et tu choisis le lien :
firmware-9.7.0-amd64-netinst.iso  smile

Tu colles ça sur une cle usb (ou un cdrom) et tu boot dessus

Normalement tu auras un truc stable et en pointe.
Ensuite, si tu rencontres des difficultés, tu pourras partir de cette installation  pour les régler en informant le forum, par exemple depuis un second pc si l'installation de base ne le permet pas.

Force et courage

Dernière modification par smolski (06-02-2019 11:49:19)


saque eud dun (patois chtimi : fonce dedans)

Hors ligne

#23 06-02-2019 12:23:05

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Nickel ! wink
Je fais une image, et je repars de zéro.
Je donne le retour.
Merci !

15 H 51 : il manquait deux paquets :
firmware-realtek_20161130-4_all.deb
firmware-realtek_20161130-4~deb8u1_all.deb

Mais l'install est en cours.
J'ai téléchargé ces deux paquets pour Stretch.
Ca continue smile

Dernière modification par Lupa (06-02-2019 15:52:12)

Hors ligne

#24 08-02-2019 09:03:26

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Bonjour à tous smile
Ca a l'ai d'y être. Il est stable.
Il démarre plus vite. Pas plus qu'Ubuntu 18, mais c'est franchement mieux que ce que j'avais fait avant vos conseils wink

Je vais donc corriger ce sources.list.

Quant à Dropbox, là... J'ai installé le greffon pour Dolphin.
Ici : https://www.dropbox.com/fr/help/desktop … x-commands une procédure d'installation. Je verrai ce que ça donne sous Debian.

Hors ligne

#25 09-02-2019 10:58:21

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Lamentable installation de Stretch.

Bonjour à tous smile

Quelques détails.
Au démarrage, l'écran affiche que l'OS ne trouve pas certains périphériques.
- le bluetooth : j'hésite à l'installer, c'est très lourd. Et l'utilisatrice n'en n'a pas besoin.
- ACPI : drivers de la carte mère, ça.

Quant à la caméra, comment savoir si elle fonctionne ?

Voici des tests :

Bus 002 Device 002: ID 0bc2:61b6 Seagate RSS LLC
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 05c8:038f Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 003: ID 0bda:b008 Realtek Semiconductor Corp.
Bus 001 Device 006: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 004: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 




lshw



hp-deb
    description: Ordinateur Bloc-notes
    produit: HP Notebook (Z3F06EA#ABF)
    fabriquant: HP
    version: Type1ProductConfigId
    numéro de série: CND64027B2
    bits: 64 bits
    fonctionnalités: smbios-2.8 dmi-2.8 smp vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=notebook family=103C_5335KV G=N L=CON B=HP sku=Z3F06EA#ABF uuid=54A94912-89DB-11E6-B753-C8D3FF215556
  *-core
       description: Carte mère
       produit: 81EE
       fabriquant: HP
       identifiant matériel: 0
       version: 62.29
       numéro de série: PGBKBC5MY46EQK
       emplacement: Type2 - Board Chassis Location
     *-firmware
          description: BIOS
          fabriquant: Insyde
          identifiant matériel: 0
          version: F.17
          date: 09/08/2016
          taille: 128KiB
          capacité: 6080KiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification uefi
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz
          fabriquant: Intel Corp.
          identifiant matériel: 4
          information bus: cpu@0
          version: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz
          numéro de série: To Be Filled By O.E.M.
          emplacement: U3E1
          taille: 713MHz
          capacité: 4005MHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single ssbd ibrs ibpb stibp kaiser tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp flush_l1d cpufreq
          configuration: cores=2 enabledcores=2 threads=4
        *-cache:0
             description: L1 cache
             identifiant matériel: 5
             emplacement: L1 Cache
             taille: 128KiB
             capacité: 128KiB
             fonctionnalités: synchronous internal write-back unified
             configuration: level=1
        *-cache:1
             description: L2 cache
             identifiant matériel: 6
             emplacement: L2 Cache
             taille: 512KiB
             capacité: 512KiB
             fonctionnalités: synchronous internal write-back unified
             configuration: level=2
        *-cache:2
             description: L3 cache
             identifiant matériel: 7
             emplacement: L3 Cache
             taille: 3MiB
             capacité: 3MiB
             fonctionnalités: synchronous internal write-back unified
             configuration: level=3
     *-memory
          description: Mémoire Système
          identifiant matériel: 26
          emplacement: Carte mère
          taille: 4GiB
        *-bank:0
             description: SODIMM DDR4 Synchrone 2133 MHz (0,5 ns)
             produit: M471A5143EB0-CPB
             fabriquant: Samsung
             identifiant matériel: 0
             numéro de série: 16ACED09
             emplacement: Bottom-slot 1(left)
             taille: 4GiB
             bits: 64 bits
             horloge: 2133MHz (0.5ns)
        *-bank:1
             description: SODIMM DDR Synchrone [vide]
             identifiant matériel: 1
             emplacement: Bottom-slot 2(right)
     *-pci
          description: Host bridge
          produit: Intel Corporation
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 02
          bits: 32 bits
          horloge: 33MHz
        *-display
             description: VGA compatible controller
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 02
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:126 mémoire:c0000000-c0ffffff mémoire:b0000000-bfffffff portE/S:6000(taille=64) mémoire:c0000-dffff
        *-generic:0
             description: Signal processing controller
             produit: Skylake Processor Thermal Subsystem
             fabriquant: Intel Corporation
             identifiant matériel: 4
             information bus: pci@0000:00:04.0
             version: 02
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: msi pm bus_master cap_list
             configuration: driver=proc_thermal latency=0
             ressources: irq:16 mémoire:c1420000-c1427fff
        *-generic:1 NON-RÉCLAMÉ
             description: System peripheral
             produit: Skylake Gaussian Mixture Model
             fabriquant: Intel Corporation
             identifiant matériel: 8
             information bus: pci@0000:00:08.0
             version: 00
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: msi pm bus_master cap_list
             configuration: latency=0
             ressources: mémoire:c1432000-c1432fff
        *-usb
             description: USB controller
             produit: Sunrise Point-LP USB 3.0 xHCI Controller
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:123 mémoire:c1400000-c140ffff
           *-usbhost:0
                produit: xHCI Host Controller
                fabriquant: Linux 4.9.0-8-amd64 xhci-hcd
                identifiant matériel: 0
                information bus: usb@1
                nom logique: usb1
                version: 4.09
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=12 speed=480Mbit/s
              *-usb:0
                   description: USB hub
                   produit: USB2.0 Hub
                   fabriquant: Genesys Logic, Inc.
                   identifiant matériel: 3
                   information bus: usb@1:3
                   version: 85.36
                   fonctionnalités: usb-2.00
                   configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
                 *-usb:0
                      description: Clavier
                      produit: HP Basic USB Keyboard
                      fabriquant: CHICONY
                      identifiant matériel: 3
                      information bus: usb@1:3.3
                      version: 1.30
                      fonctionnalités: usb-2.00
                      configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
                 *-usb:1
                      description: Souris
                      produit: USB Optical Mouse
                      fabriquant: Logitech
                      identifiant matériel: 4
                      information bus: usb@1:3.4
                      version: 72.00
                      fonctionnalités: usb-2.00
                      configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
              *-usb:1
                   description: Interface sans fil Bluetooth
                   produit: Bluetooth Radio
                   fabriquant: Realtek
                   identifiant matériel: 4
                   information bus: usb@1:4
                   version: 2.00
                   numéro de série: 00e04c000001
                   fonctionnalités: bluetooth usb-2.10
                   configuration: driver=btusb maxpower=500mA speed=12Mbit/s
              *-usb:2
                   description: Vidéo
                   produit: HP TrueVision HD
                   fabriquant: Generic
                   identifiant matériel: 5
                   information bus: usb@1:5
                   version: 1.02
                   numéro de série: 200901010001
                   fonctionnalités: usb-2.00
                   configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
           *-usbhost:1
                produit: xHCI Host Controller
                fabriquant: Linux 4.9.0-8-amd64 xhci-hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 4.09
                fonctionnalités: usb-3.00
                configuration: driver=hub slots=6 speed=5000Mbit/s
              *-usb
                   description: Périphérique de stockage de masse
                   produit: M3
                   fabriquant: Seagate
                   identifiant matériel: 1
                   information bus: usb@2:1
                   nom logique: scsi2
                   version: 7.07
                   numéro de série: NM12HBQ1
                   fonctionnalités: usb-3.00 scsi
                   configuration: driver=uas maxpower=896mA speed=5000Mbit/s
                 *-disk
                      description: SCSI Disk
                      produit: M3
                      fabriquant: Seagate
                      identifiant matériel: 0.0.0
                      information bus: scsi@2:0.0.0
                      nom logique: /dev/sdb
                      version: 0707
                      numéro de série: NM12HBQ1
                      taille: 931GiB (1TB)
                      fonctionnalités: partitioned partitioned:dos
                      configuration: ansiversion=6 logicalsectorsize=512 sectorsize=4096 signature=708a86dc
                    *-volume
                         description: EXT4 volume
                         fabriquant: Linux
                         identifiant matériel: 1
                         information bus: scsi@2:0.0.0,1
                         nom logique: /dev/sdb1
                         nom logique: /media/root/MAXTOR-1-To
                         version: 1.0
                         numéro de série: a0469c84-eaf1-491f-b5cb-33ff37efa791
                         taille: 931GiB
                         capacité: 931GiB
                         fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                         configuration: created=2017-11-13 14:22:13 filesystem=ext4 label=MAXTOR-1-To lastmountpoint=/home/partimag modified=2019-02-09 10:34:24 mount.fstype=ext4 mount.options=rw,nosuid,nodev,relatime,data=ordered mounted=2019-02-09 10:34:24 state=mounted
        *-generic:2
             description: Signal processing controller
             produit: Sunrise Point-LP Thermal subsystem
             fabriquant: Intel Corporation
             identifiant matériel: 14.2
             information bus: pci@0000:00:14.2
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=intel_pch_thermal latency=0
             ressources: irq:18 mémoire:c1433000-c1433fff
        *-communication
             description: Communication controller
             produit: Sunrise Point-LP CSME HECI #1
             fabriquant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             ressources: irq:125 mémoire:c1434000-c1434fff
        *-storage
             description: SATA controller
             produit: Sunrise Point-LP SATA Controller [AHCI mode]
             fabriquant: Intel Corporation
             identifiant matériel: 17
             information bus: pci@0000:00:17.0
             version: 21
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             ressources: irq:124 mémoire:c1430000-c1431fff mémoire:c1437000-c14370ff portE/S:6080(taille=8) portE/S:6088(taille=4) portE/S:6060(taille=32) mémoire:c1435000-c14357ff
        *-pci:0
             description: PCI bridge
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 portE/S:5000(taille=4096) mémoire:c1300000-c13fffff portE/S:a0000000(taille=268435456)
           *-display
                description: Display controller
                produit: Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430]
                fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: 83
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm pciexpress msi bus_master cap_list rom
                configuration: driver=radeon latency=0
                ressources: irq:128 mémoire:a0000000-afffffff mémoire:c1300000-c133ffff portE/S:5000(taille=256) mémoire:c1340000-c135ffff
        *-pci:1
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #5
             fabriquant: Intel Corporation
             identifiant matériel: 1c.4
             information bus: pci@0000:00:1c.4
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 portE/S:4000(taille=4096) mémoire:c1200000-c12fffff portE/S:c1000000(taille=1048576)
           *-network
                description: Ethernet interface
                produit: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                nom logique: enp2s0
                version: 07
                numéro de série: c8:d3:ff:21:55:56
                taille: 100Mbit/s
                capacité: 100Mbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8106e-1_0.0.1 06/29/12 ip=192.168.0.38 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
                ressources: irq:122 portE/S:4000(taille=256) mémoire:c1200000-c1200fff mémoire:c1000000-c1003fff
        *-pci:2
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #6
             fabriquant: Intel Corporation
             identifiant matériel: 1c.5
             information bus: pci@0000:00:1c.5
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:17 portE/S:3000(taille=4096) mémoire:c1100000-c11fffff
           *-network
                description: Interface réseau sans fil
                produit: RTL8723BE PCIe Wireless Network Adapter
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                nom logique: wlo1
                version: 00
                numéro de série: 1e:c7:61:88:5f:8c
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=rtl8723be driverversion=4.9.0-8-amd64 firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11
                ressources: irq:17 portE/S:3000(taille=256) mémoire:c1100000-c1103fff
        *-isa
             description: ISA bridge
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 21
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master
             configuration: latency=0
        *-memory NON-RÉCLAMÉ
             description: Memory controller
             produit: Sunrise Point-LP PMC
             fabriquant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 21
             bits: 32 bits
             horloge: 33MHz (30.3ns)
             fonctionnalités: bus_master
             configuration: latency=0
             ressources: mémoire:c142c000-c142ffff
        *-multimedia
             description: Audio device
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             ressources: irq:127 mémoire:c1428000-c142bfff mémoire:c1410000-c141ffff
        *-serial
             description: SMBus
             produit: Sunrise Point-LP SMBus
             fabriquant: Intel Corporation
             identifiant matériel: 1f.4
             information bus: pci@0000:00:1f.4
             version: 21
             bits: 64 bits
             horloge: 33MHz
             configuration: driver=i801_smbus latency=0
             ressources: irq:16 mémoire:c1436000-c14360ff portE/S:6040(taille=32)
     *-scsi:0
          identifiant matériel: 1
          nom logique: scsi0
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: TOSHIBA MQ01ABD1
             fabriquant: Toshiba
             identifiant matériel: 0.0.0
             information bus: scsi@0:0.0.0
             nom logique: /dev/sda
             version: 4C
             numéro de série: 9696PR2QT
             taille: 931GiB (1TB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=fb5484f1
           *-volume:0
                description: EXT4 volume
                fabriquant: Linux
                identifiant matériel: 1
                information bus: scsi@0:0.0.0,1
                nom logique: /dev/sda1
                nom logique: /
                version: 1.0
                numéro de série: 8158375d-676a-46b6-a4d5-c9847342c069
                taille: 927GiB
                capacité: 927GiB
                fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
                configuration: created=2019-02-06 15:26:03 filesystem=ext4 lastmountpoint=/ modified=2019-02-09 10:31:20 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2019-02-08 11:29:37 state=mounted
           *-volume:1
                description: Extended partition
                identifiant matériel: 2
                information bus: scsi@0:0.0.0,2
                nom logique: /dev/sda2
                taille: 4012MiB
                capacité: 4012MiB
                fonctionnalités: primary extended partitioned partitioned:extended
              *-logicalvolume
                   description: Linux swap volume
                   identifiant matériel: 5
                   nom logique: /dev/sda5
                   version: 1
                   numéro de série: 7c731fec-94b3-41c9-8a50-0a6f3c7a83c0
                   taille: 4012MiB
                   capacité: 4012MiB
                   fonctionnalités: nofs swap initialized
                   configuration: filesystem=swap pagesize=4096
     *-scsi:1
          identifiant matériel: 2
          nom logique: scsi1
          fonctionnalités: emulated
        *-cdrom
             description: DVD-RAM writer
             produit: DVDRW GUD1N
             fabriquant: hp
             identifiant matériel: 0.0.0
             information bus: scsi@1:0.0.0
             nom logique: /dev/cdrom
             nom logique: /dev/cdrw
             nom logique: /dev/dvd
             nom logique: /dev/dvdrw
             nom logique: /dev/sr0
             version: MD00
             fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
  *-battery
       produit: HS04041
       fabriquant: 111-83-72
       identifiant matériel: 1
       version: 0
       numéro de série: 0
       emplacement: Primary
       capacité: 41440mWh
       configuration: voltage=14,8V
  *-power NON-RÉCLAMÉ
       description: OEM Define 1
       produit: OEM Define 5
       fabriquant: OEM Define 2
       identifiant matériel: 2
       version: OEM Define 6
       numéro de série: OEM Define 3
       capacité: 75mWh

 



dmesg



[    0.000000] microcode: microcode updated early to revision 0x8e, date = 2018-03-24
[    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=8158375d-676a-46b6-a4d5-c9847342c069 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000074296fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000074297000-0x0000000074297fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000074298000-0x0000000074298fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000074299000-0x000000008bd9dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008bd9e000-0x000000008c78dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008c78e000-0x000000008ce7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ce7e000-0x000000008cefdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008cefe000-0x000000008cefefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: HP HP Notebook/81EE, BIOS F.17 09/08/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x16f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 008D800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x8ceff max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff9cecc00fe1b0]
[    0.000000] Base memory trampoline at [ffff9cecc0098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x15373a000, 0x15373afff] PGTABLE
[    0.000000] BRK [0x15373b000, 0x15373bfff] PGTABLE
[    0.000000] BRK [0x15373c000, 0x15373cfff] PGTABLE
[    0.000000] BRK [0x15373d000, 0x15373dfff] PGTABLE
[    0.000000] BRK [0x15373e000, 0x15373efff] PGTABLE
[    0.000000] BRK [0x15373f000, 0x15373ffff] PGTABLE
[    0.000000] BRK [0x153740000, 0x153740fff] PGTABLE
[    0.000000] BRK [0x153741000, 0x153741fff] PGTABLE
[    0.000000] BRK [0x153742000, 0x153742fff] PGTABLE
[    0.000000] BRK [0x153743000, 0x153743fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35829000-0x36c0bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000008CEAE188 00012C (v01 HPQOEM SLIC-MPC 00000000 HP   01000013)
[    0.000000] ACPI: FACP 0x000000008CEDD000 00010C (v05 HPQOEM SLIC-MPC 00000000 HP   00040000)
[    0.000000] ACPI: DSDT 0x000000008CEB2000 027506 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000008CE5B000 000040
[    0.000000] ACPI: UEFI 0x000000008CEFC000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000008CEFB000 000042 (v01 HPQOEM INSYDE   00000002 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000008CEFA000 0004C8 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CEF9000 000046 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000008CEF8000 000034 (v03 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000008CEF0000 00756B (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000008CEEF000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000008CEE6000 0087AB (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CEE2000 003722 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000008CEE1000 0000A5 (v32 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: ASPT 0x000000008CEE0000 000034 (v07 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: BOOT 0x000000008CEDF000 000028 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: DBGP 0x000000008CEDE000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x000000008CEDC000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: APIC 0x000000008CEDB000 0000BC (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: MCFG 0x000000008CEDA000 00003C (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000008CEB1000 000E7A (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CEB0000 0001BC (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CEAF000 00018E (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000008CEAD000 000094 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000008CEAC000 00029F (v02 HPQOEM INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CEAB000 000346 (v01 HPQOEM INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CEA7000 00357E (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CEA6000 00051E (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008CEA5000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.000000] ACPI: DBG2 0x000000008CEA4000 000054 (v00 HPQOEM INSYDE   00000002 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000008CEA2000 001062 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CEA1000 000EE0 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008CE9F000 001B5E (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000008CE9E000 0000A8 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: NHLT 0x000000008CE9D000 00002D (v00 HPQOEM INSYDE   00000002 HP   00040000)
[    0.000000] ACPI: FPDT 0x000000008CE9C000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000016effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x16effb000-0x16effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000074296fff]
[    0.000000]   node   0: [mem 0x0000000074299000-0x000000008bd9dfff]
[    0.000000]   node   0: [mem 0x000000008cefe000-0x000000008cefefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000016effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000016effffff]
[    0.000000] On node 0 totalpages: 1027386
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8887 pages used for memmap
[    0.000000]   DMA32 zone: 568733 pages, LIFO batch:31
[    0.000000]   Normal zone: 7104 pages used for memmap
[    0.000000]   Normal zone: 454656 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000008e000000-0x000000008fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x74297000-0x74297fff]
[    0.000000] PM: Registered nosave memory: [mem 0x74298000-0x74298fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8bd9e000-0x8c78dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8c78e000-0x8ce7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ce7e000-0x8cefdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ceff000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9cee2ec00000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1011310
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=8158375d-676a-46b6-a4d5-c9847342c069 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3941324K/4109544K available (6267K kernel code, 1159K rwdata, 2872K rodata, 1420K init, 688K bss, 168220K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2700.000 MHz processor
[    0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=10848000)
[    0.000025] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20160831
[    0.040140] ACPI: 16 ACPI AML tables successfully acquired and loaded
[    0.040182] Security Framework initialized
[    0.040183] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.040187] AppArmor: AppArmor disabled by boot time parameter
[    0.040378] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.041074] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.041382] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.041386] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.041607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.041608] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.041612] mce: CPU supports 8 MCE banks
[    0.041620] CPU0: Thermal monitoring enabled (TM1)
[    0.041636] process: using mwait in idle threads
[    0.041638] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.041639] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.041640] Spectre V2 : Mitigation: Full generic retpoline
[    0.041641] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.041641] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.041642] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.041643] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.042028] Freeing SMP alternatives memory: 24K
[    0.045842] ftrace: allocating 25291 entries in 99 pages
[    0.070129] smpboot: Max logical packages: 2
[    0.070137] DMAR: Host address width 39
[    0.070138] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.070143] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.070144] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.070148] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.070149] DMAR: RMRR base: 0x0000008c6b9000 end: 0x0000008c6d8fff
[    0.070150] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.070152] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.070153] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.070153] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.070154] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.071551] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.071552] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.075488] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.115182] TSC deadline timer enabled
[    0.115186] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.115190] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.115227] ... version:                4
[    0.115227] ... bit width:              48
[    0.115227] ... generic registers:      4
[    0.115228] ... value mask:             0000ffffffffffff
[    0.115229] ... max period:             00007fffffffffff
[    0.115229] ... fixed-purpose events:   3
[    0.115230] ... event mask:             000000070000000f
[    0.115767] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.115864] x86: Booting SMP configuration:
[    0.115865] .... node  #0, CPUs:      #1 #2 #3
[    0.124780] x86: Booted up 1 node, 4 CPUs
[    0.124781] smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
[    0.128345] devtmpfs: initialized
[    0.128402] x86/mm: Memory block size: 128MB
[    0.130627] PM: Registering ACPI NVS region [mem 0x74297000-0x74297fff] (4096 bytes)
[    0.130628] PM: Registering ACPI NVS region [mem 0x8c78e000-0x8ce7dfff] (7274496 bytes)
[    0.130787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.130794] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.130832] pinctrl core: initialized pinctrl subsystem
[    0.130929] NET: Registered protocol family 16
[    0.144792] cpuidle: using governor ladder
[    0.160815] cpuidle: using governor menu
[    0.160862] Simple Boot Flag at 0x44 set to 0x1
[    0.160878] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.160879] ACPI: bus type PCI registered
[    0.160880] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.160947] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.160949] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.160958] PCI: Using configuration type 1 for base access
[    0.176968] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.176969] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.177188] ACPI: Added _OSI(Module Device)
[    0.177189] ACPI: Added _OSI(Processor Device)
[    0.177190] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.177190] ACPI: Added _OSI(Processor Aggregator Device)
[    0.178738] ACPI: Executed 35 blocks of module-level executable AML code
[    0.191392] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.194775] ACPI: Dynamic OEM Table Load:
[    0.194830] ACPI: SSDT 0xFFFF9CEE2A25B000 0006B4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.195097] ACPI: Executed 1 blocks of module-level executable AML code
[    0.195164] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.196799] ACPI: Dynamic OEM Table Load:
[    0.196809] ACPI: SSDT 0xFFFF9CEE28C04000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.197061] ACPI: Executed 1 blocks of module-level executable AML code
[    0.197715] ACPI: Dynamic OEM Table Load:
[    0.197725] ACPI: SSDT 0xFFFF9CEE2A25B800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.198211] ACPI: Executed 1 blocks of module-level executable AML code
[    0.198375] ACPI: Dynamic OEM Table Load:
[    0.198383] ACPI: SSDT 0xFFFF9CEE29309A00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.198630] ACPI: Executed 1 blocks of module-level executable AML code
[    0.200788] ACPI : EC: EC started
[    0.200788] ACPI : EC: interrupt blocked
[    0.201132] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.201134] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.201135] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.201136] ACPI: Interpreter enabled
[    0.201184] ACPI: (supports S0 S3 S4 S5)
[    0.201185] ACPI: Using IOAPIC for interrupt routing
[    0.201222] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.222934] ACPI: Power Resource [PC05] (on)
[    0.223341] ACPI: Power Resource [WRST] (on)
[    0.223827] ACPI: Power Resource [WRST] (on)
[    0.224241] ACPI: Power Resource [WRST] (on)
[    0.224656] ACPI: Power Resource [WRST] (on)
[    0.224932] ACPI: Power Resource [WRST] (on)
[    0.225353] ACPI: Power Resource [WRST] (on)
[    0.225766] ACPI: Power Resource [WRST] (on)
[    0.226178] ACPI: Power Resource [WRST] (on)
[    0.226589] ACPI: Power Resource [WRST] (on)
[    0.226999] ACPI: Power Resource [WRST] (on)
[    0.227413] ACPI: Power Resource [WRST] (on)
[    0.227824] ACPI: Power Resource [WRST] (on)
[    0.228208] ACPI: Power Resource [WRST] (on)
[    0.228591] ACPI: Power Resource [WRST] (on)
[    0.228982] ACPI: Power Resource [WRST] (on)
[    0.229365] ACPI: Power Resource [WRST] (on)
[    0.229748] ACPI: Power Resource [WRST] (on)
[    0.230131] ACPI: Power Resource [WRST] (on)
[    0.230515] ACPI: Power Resource [WRST] (on)
[    0.230897] ACPI: Power Resource [WRST] (on)
[    0.239060] ACPI: Power Resource [FN00] (off)
[    0.239153] ACPI: Power Resource [FN01] (off)
[    0.239244] ACPI: Power Resource [FN02] (off)
[    0.239336] ACPI: Power Resource [FN03] (off)
[    0.239426] ACPI: Power Resource [FN04] (off)
[    0.240734] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.240739] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.240773] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.242792] PCI host bridge to bus 0000:00
[    0.242794] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.242795] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.242797] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.242798] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.242799] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.242801] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.242809] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.243789] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.243799] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.243805] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.243809] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.244611] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.244622] pci 0000:00:04.0: reg 0x10: [mem 0xc1420000-0xc1427fff 64bit]
[    0.245455] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.245465] pci 0000:00:08.0: reg 0x10: [mem 0xc1432000-0xc1432fff 64bit]
[    0.246283] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.246302] pci 0000:00:14.0: reg 0x10: [mem 0xc1400000-0xc140ffff 64bit]
[    0.246374] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.247203] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.247243] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.247263] pci 0000:00:14.2: reg 0x10: [mem 0xc1433000-0xc1433fff 64bit]
[    0.248102] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.248125] pci 0000:00:16.0: reg 0x10: [mem 0xc1434000-0xc1434fff 64bit]
[    0.248204] pci 0000:00:16.0: PME# supported from D3hot
[    0.249019] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.249035] pci 0000:00:17.0: reg 0x10: [mem 0xc1430000-0xc1431fff]
[    0.249043] pci 0000:00:17.0: reg 0x14: [mem 0xc1437000-0xc14370ff]
[    0.249051] pci 0000:00:17.0: reg 0x18: [io  0x6080-0x6087]
[    0.249059] pci 0000:00:17.0: reg 0x1c: [io  0x6088-0x608b]
[    0.249068] pci 0000:00:17.0: reg 0x20: [io  0x6060-0x607f]
[    0.249076] pci 0000:00:17.0: reg 0x24: [mem 0xc1435000-0xc14357ff]
[    0.249121] pci 0000:00:17.0: PME# supported from D3hot
[    0.249925] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.249993] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.250794] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.250839] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.250906] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.251682] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.251716] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.251783] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.252574] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.252623] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[    0.253518] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.253530] pci 0000:00:1f.2: reg 0x10: [mem 0xc142c000-0xc142ffff]
[    0.254375] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[    0.254400] pci 0000:00:1f.3: reg 0x10: [mem 0xc1428000-0xc142bfff 64bit]
[    0.254435] pci 0000:00:1f.3: reg 0x20: [mem 0xc1410000-0xc141ffff 64bit]
[    0.254488] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.255305] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.255345] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.255391] pci 0000:00:1f.4: reg 0x10: [mem 0xc1436000-0xc14360ff 64bit]
[    0.255461] pci 0000:00:1f.4: reg 0x20: [io  0x6040-0x605f]
[    0.256379] pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
[    0.256395] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.256406] pci 0000:01:00.0: reg 0x18: [mem 0xc1300000-0xc133ffff 64bit]
[    0.256412] pci 0000:01:00.0: reg 0x20: [io  0x5000-0x50ff]
[    0.256424] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.256479] pci 0000:01:00.0: supports D1 D2
[    0.256481] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.256558] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.264933] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.264936] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.264939] pci 0000:00:1c.0:   bridge window [mem 0xc1300000-0xc13fffff]
[    0.264943] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.265022] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    0.265050] pci 0000:02:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.265083] pci 0000:02:00.0: reg 0x18: [mem 0xc1200000-0xc1200fff 64bit]
[    0.265105] pci 0000:02:00.0: reg 0x20: [mem 0xc1000000-0xc1003fff 64bit pref]
[    0.265217] pci 0000:02:00.0: supports D1 D2
[    0.265218] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.265336] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.276953] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.276955] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.276958] pci 0000:00:1c.4:   bridge window [mem 0xc1200000-0xc12fffff]
[    0.276962] pci 0000:00:1c.4:   bridge window [mem 0xc1000000-0xc10fffff 64bit pref]
[    0.277035] pci 0000:03:00.0: [10ec:b723] type 00 class 0x028000
[    0.277067] pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.277114] pci 0000:03:00.0: reg 0x18: [mem 0xc1100000-0xc1103fff 64bit]
[    0.277291] pci 0000:03:00.0: supports D1 D2
[    0.277292] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.277414] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.288969] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.288972] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.288975] pci 0000:00:1c.5:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.298365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.298418] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.298468] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.298518] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.298568] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.298618] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.298667] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.298716] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.299021] platform MSFT0101:00: failed to claim resource 1
[    0.299126] acpi MSFT0101:00: platform device creation failed: -16
[    0.299689] ACPI: Enabled 3 GPEs in block 00 to 7F
[    0.299736] ACPI : EC: interrupt unblocked
[    0.299750] ACPI : EC: event unblocked
[    0.299761] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.299762] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.299846] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.299848] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.299850] vgaarb: loaded
[    0.299850] vgaarb: bridge control possible 0000:00:02.0
[    0.299918] PCI: Using ACPI for IRQ routing
[    0.327912] PCI: pci_cache_line_size set to 64 bytes
[    0.327971] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.327973] e820: reserve RAM buffer [mem 0x74297000-0x77ffffff]
[    0.327974] e820: reserve RAM buffer [mem 0x8bd9e000-0x8bffffff]
[    0.327975] e820: reserve RAM buffer [mem 0x8ceff000-0x8fffffff]
[    0.327975] e820: reserve RAM buffer [mem 0x16f000000-0x16fffffff]
[    0.328165] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.328171] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.330210] clocksource: Switched to clocksource hpet
[    0.335497] VFS: Disk quotas dquot_6.6.0
[    0.335519] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.335587] pnp: PnP ACPI init
[    0.335734] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.335736] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.335738] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.335739] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.335741] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.335742] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.335744] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.335747] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336040] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.336042] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336209] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.336210] system 00:02: [io  0xfd60-0xfd63] has been reserved
[    0.336212] system 00:02: [io  0xffff] has been reserved
[    0.336213] system 00:02: [io  0xffff] has been reserved
[    0.336215] system 00:02: [io  0xffff] has been reserved
[    0.336216] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.336218] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.336220] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336317] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.336353] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.336355] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.336391] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.336415] pnp 00:06: Plug and Play ACPI device, IDs SYN3224 PNP0f03 (active)
[    0.343471] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.343473] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.343474] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.343476] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.343477] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.343479] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.344005] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.344007] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.344008] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.344010] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.344011] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.344013] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.344014] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.344016] system 00:08: [mem 0xff000000-0xff000fff] has been reserved
[    0.344018] system 00:08: [mem 0xff010000-0xffffffff] could not be reserved
[    0.344019] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.344021] system 00:08: [mem 0x90000000-0x9001ffff] has been reserved
[    0.344023] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.344673] pnp: PnP ACPI: found 9 devices
[    0.351740] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.351744] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.351768] pci 0000:01:00.0: BAR 6: assigned [mem 0xc1340000-0xc135ffff pref]
[    0.351770] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.351772] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.351776] pci 0000:00:1c.0:   bridge window [mem 0xc1300000-0xc13fffff]
[    0.351779] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.351783] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.351785] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.351788] pci 0000:00:1c.4:   bridge window [mem 0xc1200000-0xc12fffff]
[    0.351791] pci 0000:00:1c.4:   bridge window [mem 0xc1000000-0xc10fffff 64bit pref]
[    0.351796] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.351798] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.351801] pci 0000:00:1c.5:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.351808] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.351809] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.351811] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.351812] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.351813] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.351815] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.351816] pci_bus 0000:01: resource 1 [mem 0xc1300000-0xc13fffff]
[    0.351817] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.351818] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.351820] pci_bus 0000:02: resource 1 [mem 0xc1200000-0xc12fffff]
[    0.351821] pci_bus 0000:02: resource 2 [mem 0xc1000000-0xc10fffff 64bit pref]
[    0.351822] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.351823] pci_bus 0000:03: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.352015] NET: Registered protocol family 2
[    0.352158] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.352208] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.352272] TCP: Hash tables configured (established 32768 bind 32768)
[    0.352288] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.352299] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.352344] NET: Registered protocol family 1
[    0.352355] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.353844] PCI: CLS 64 bytes, default 64
[    0.353878] Unpacking initramfs...
[    0.672187] Freeing initrd memory: 20364K
[    0.672231] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.672234] software IO TLB [mem 0x87d9e000-0x8bd9e000] (64MB) mapped at [ffff9ced47d9e000-ffff9ced4bd9dfff]
[    0.672550] audit: initializing netlink subsys (disabled)
[    0.672565] audit: type=2000 audit(1549704679.668:1): initialized
[    0.672987] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.673041] zbud: loaded
[    0.674092] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.674139] io scheduler noop registered
[    0.674140] io scheduler deadline registered
[    0.674163] io scheduler cfq registered (default)
[    0.674694] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.674697] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.674710] intel_idle: MWAIT substates: 0x11142120
[    0.674711] intel_idle: v0.4.1 model 0x8E
[    0.674904] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.675080] GHES: HEST is not enabled!
[    0.675135] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.675578] Linux agpgart interface v0.103
[    0.675655] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.675655] AMD IOMMUv2 functionality not available on this system
[    0.675965] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.702356] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.702359] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.702469] mousedev: PS/2 mouse device common for all mice
[    0.702510] rtc_cmos 00:03: RTC can wake from S4
[    0.702884] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.702965] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.702970] intel_pstate: Intel P-state driver initializing
[    0.703211] intel_pstate: HWP enabled
[    0.703285] ledtrig-cpu: registered to indicate activity on CPUs
[    0.703636] NET: Registered protocol family 10
[    0.703853] mip6: Mobile IPv6
[    0.703853] NET: Registered protocol family 17
[    0.703855] mpls_gso: MPLS GSO support
[    0.703979] microcode: sig=0x806e9, pf=0x80, revision=0x8e
[    0.704019] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.704113] registered taskstats version 1
[    0.704122] zswap: loaded using pool lzo/zbud
[    0.704252] ima: No TPM chip found, activating TPM-bypass!
[    0.704253] ima: Allocated hash algorithm: sha256
[    0.705104] rtc_cmos 00:03: setting system clock to 2019-02-09 09:31:19 UTC (1549704679)
[    0.705148] PM: Hibernation image not present or could not be loaded.
[    0.705858] Freeing unused kernel memory: 1420K
[    0.705858] Write protecting the kernel read-only data: 12288k
[    0.706146] Freeing unused kernel memory: 1908K
[    0.707645] Freeing unused kernel memory: 1224K
[    0.711209] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.713235] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.721787] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.721839] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.721845] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.758621] thermal LNXTHERM:00: registered as thermal_zone0
[    0.758622] ACPI: Thermal Zone [TZ00] (28 C)
[    0.758723] thermal LNXTHERM:01: registered as thermal_zone1
[    0.758724] ACPI: Thermal Zone [TZ01] (30 C)
[    0.758769] thermal LNXTHERM:02: registered as thermal_zone2
[    0.758769] ACPI: Thermal Zone [TZ02] (10 C)
[    0.761394] SCSI subsystem initialized
[    0.761656] ACPI: bus type USB registered
[    0.761677] usbcore: registered new interface driver usbfs
[    0.761685] usbcore: registered new interface driver hub
[    0.761701] usbcore: registered new device driver usb
[    0.763054] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.763062] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.763382] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.763389] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.763473] libata version 3.00 loaded.
[    0.763625] r8169 0000:02:00.0 eth0: RTL8106e at 0xffffa9f0406b5000, c8:d3:ff:21:55:56, XID 04900000 IRQ 122
[    0.764485] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.764489] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.764592] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.764594] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.764595] usb usb1: Product: xHCI Host Controller
[    0.764597] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
[    0.764598] usb usb1: SerialNumber: 0000:00:14.0
[    0.764724] hub 1-0:1.0: USB hub found
[    0.764743] hub 1-0:1.0: 12 ports detected
[    0.765778] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.765782] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.765817] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.765818] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.765819] usb usb2: Product: xHCI Host Controller
[    0.765821] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
[    0.765822] usb usb2: SerialNumber: 0000:00:14.0
[    0.765930] hub 2-0:1.0: USB hub found
[    0.765945] hub 2-0:1.0: 6 ports detected
[    0.766186] usb: port power management may be unreliable
[    0.767194] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.767237] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.771566] AVX2 version of gcm_enc/dec engaged.
[    0.771567] AES CTR mode by8 optimization enabled
[    0.775689] ahci 0000:00:17.0: version 3.0
[    0.786003] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.786005] ahci 0000:00:17.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
[    0.786322] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    0.786390] scsi host0: ahci
[    0.786538] scsi host1: ahci
[    0.786607] ata1: SATA max UDMA/133 abar m2048@0xc1435000 port 0xc1435100 irq 124
[    0.786609] ata2: SATA max UDMA/133 abar m2048@0xc1435000 port 0xc1435180 irq 124
[    1.090406] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.098963] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.099003] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.101648] ata2.00: ATAPI: hp       DVDRW GUD1N, MD00, max UDMA/133
[    1.102191] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX1R4C, max UDMA/100
[    1.102196] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.105841] ata2.00: configured for UDMA/133
[    1.107409] ata1.00: configured for UDMA/100
[    1.107979] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 4C   PQ: 0 ANSI: 5
[    1.142432] scsi 1:0:0:0: CD-ROM            hp       DVDRW GUD1N      MD00 PQ: 0 ANSI: 5
[    1.163382] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.163389] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.163777] sd 0:0:0:0: [sda] Write Protect is off
[    1.163783] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.163856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.180362] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.180366] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.180777] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.232109] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[    1.232114] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.232117] usb 1-3: Product: USB2.0 Hub
[    1.233002] hub 1-3:1.0: USB hub found
[    1.233272] hub 1-3:1.0: 4 ports detected
[    1.298190]  sda: sda1 sda2 < sda5 >
[    1.299555] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.354310] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.432130] random: fast init done
[    1.492127] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[    1.495941] usb 1-4: New USB device found, idVendor=0bda, idProduct=b008
[    1.495945] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.495948] usb 1-4: Product: Bluetooth Radio
[    1.495951] usb 1-4: Manufacturer: Realtek
[    1.495954] usb 1-4: SerialNumber: 00e04c000001
[    1.522187] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[    1.574302] usb 1-3.3: new low-speed USB device number 4 using xhci_hcd
[    1.581247] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[    1.619627] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    1.690638] usb 1-3.3: New USB device found, idVendor=03f0, idProduct=0024
[    1.690643] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.690647] usb 1-3.3: Product: HP Basic USB Keyboard
[    1.690650] usb 1-3.3: Manufacturer: CHICONY
[    1.694258] tsc: Refined TSC clocksource calibration: 2712.009 MHz
[    1.694274] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27178ec3e42, max_idle_ns: 440795287235 ns
[    1.695212] hidraw: raw HID events driver (C) Jiri Kosina
[    1.703680] usbcore: registered new interface driver usbhid
[    1.703682] usbhid: USB HID core driver
[    1.705236] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:03F0:0024.0001/input/input3
[    1.762716] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-3.3/input0
[    1.793845] PM: Starting manual resume from disk
[    1.793850] PM: Hibernation image partition 8:5 present
[    1.793852] PM: Looking for hibernation image.
[    1.794089] PM: Image not found (code -22)
[    1.794091] PM: Hibernation image not present or could not be loaded.
[    1.794299] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[    1.973987] usb 1-5: New USB device found, idVendor=05c8, idProduct=038f
[    1.973992] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.973996] usb 1-5: Product: HP TrueVision HD
[    1.973999] usb 1-5: Manufacturer: Generic
[    1.974002] usb 1-5: SerialNumber: 200901010001
[    2.014299] usb 1-3.4: new low-speed USB device number 6 using xhci_hcd
[    2.126110] usb 1-3.4: New USB device found, idVendor=046d, idProduct=c077
[    2.126116] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.126119] usb 1-3.4: Product: USB Optical Mouse
[    2.126122] usb 1-3.4: Manufacturer: Logitech
[    2.128653] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:046D:C077.0002/input/input4
[    2.128798] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-3.4/input0
[    2.137415] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.718652] clocksource: Switched to clocksource tsc
[    3.761802] random: crng init done
[    3.761805] random: 7 urandom warning(s) missed due to ratelimiting
[    3.783659] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.945012] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.945134] systemd[1]: Detected architecture x86-64.
[    3.964997] systemd[1]: Set hostname to <HP-Deb>.
[    5.487567] systemd[1]: Listening on udev Kernel Socket.
[    5.487779] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.487898] systemd[1]: Listening on Journal Socket.
[    5.488243] systemd[1]: Created slice System Slice.
[    5.533420] systemd[1]: Starting Set the console keyboard layout...
[    5.533812] systemd[1]: Created slice system-getty.slice.
[    5.586527] systemd[1]: Starting Load Kernel Modules...
[    6.175555] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.342565] lp: driver loaded but no devices found
[    6.418505] ppdev: user-space parallel port driver
[    6.831060] RPC: Registered named UNIX socket transport module.
[    6.831063] RPC: Registered udp transport module.
[    6.831064] RPC: Registered tcp transport module.
[    6.831066] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.206585] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    7.241728] systemd-journald[220]: Received request to flush runtime journal from PID 1
[    7.817838] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.553728] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.585539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.644765] Initializing HPQ6001 module
[   11.644827] input: HP Wireless hotkeys as /devices/virtual/input/input5
[   11.658334] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input6
[   11.658348] ACPI: Lid Switch [LID0]
[   11.658401] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   11.658403] ACPI: Power Button [PWRF]
[   11.754258] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   11.830442] ACPI: Battery Slot [BAT1] (battery present)
[   12.009228] wmi: Mapper loaded
[   12.043065] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.043118] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   12.071317] iTCO_vendor_support: vendor-support=0
[   12.123722] ACPI: AC Adapter [ACAD] (on-line)
[   12.147051] acpi INT33D6:00: intel-vbtn: created platform device
[   12.147272] intel-vbtn INT33D6:00: failed to read Intel Virtual Button driver
[   12.160472] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.160596] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[   12.160691] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.342815] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   12.626905] [drm] Initialized
[   13.242874] [drm] Memory usable by graphics device = 4096M
[   13.242876] [drm] Replacing VGA console driver
[   13.243642] Console: switching to colour dummy device 80x25
[   13.249904] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.249906] [drm] Driver supports precise vblank timestamp query.
[   13.252859] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.259409] [drm] GuC firmware load skipped
[   13.277784] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.280399] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   13.280627] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   13.280636] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   13.284937] fbcon: inteldrmfb (fb0) is primary device
[   13.404314] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_01.bin
[   13.405092] [drm] Finished loading i915/kbl_dmc_ver1_01.bin (v1.1)
[   13.468108] [drm] radeon kernel modesetting enabled.
[   13.468150] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   13.468519] ATPX version 1, functions 0x00000033
[   13.468892] ATPX Hybrid Graphics
[   13.478419] Bluetooth: Core ver 2.22
[   13.478450] NET: Registered protocol family 31
[   13.478452] Bluetooth: HCI device and connection manager initialized
[   13.478458] Bluetooth: HCI socket layer initialized
[   13.478463] Bluetooth: L2CAP socket layer initialized
[   13.478472] Bluetooth: SCO socket layer initialized
[   13.550696] usbcore: registered new interface driver btusb
[   13.552065] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   13.552068] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[   13.582646] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_config.bin (-2)
[   13.582648] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[   13.582652] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin
[   13.582653] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[   13.592214] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[   13.593048] Bluetooth: hci0: rom_version status=0 version=1
[   13.593052] Bluetooth: cfg_sz 0, total size 22496
[   13.722032] CRAT table not found
[   13.722034] Finished initializing topology ret=0
[   13.722058] kfd kfd: Initialized module
[   13.808117] kvm: disabled by bios
[   13.847161] kvm: disabled by bios
[   13.895876] kvm: disabled by bios
[   13.930764] kvm: disabled by bios
[   14.408979] intel_rapl: Found RAPL domain package
[   14.408986] intel_rapl: Found RAPL domain core
[   14.408995] intel_rapl: Found RAPL domain uncore
[   14.409002] intel_rapl: Found RAPL domain dram
[   14.412296] Console: switching to colour frame buffer device 170x48
[   14.435378] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.435459] radeon 0000:01:00.0: enabling device (0400 -> 0403)
[   14.436094] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x103C:0x81EE 0x83).
[   14.436130] [drm] register mmio base: 0xC1300000
[   14.436133] [drm] register mmio size: 262144
[   14.436137] vga_switcheroo: enabled
[   14.452294] ATOM BIOS: HP
[   14.452303] [drm] GPU not posted. posting now...
[   14.456861] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[   14.456863] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[   14.456874] [drm] Detected VRAM RAM=2048M, BAR=256M
[   14.456875] [drm] RAM width 64bits DDR
[   14.456912] [TTM] Zone  kernel: Available graphics memory: 1983132 kiB
[   14.456913] [TTM] Initializing pool allocator
[   14.456917] [TTM] Initializing DMA pool allocator
[   14.456933] [drm] radeon: 2048M of VRAM memory ready
[   14.456934] [drm] radeon: 2048M of GTT memory ready.
[   14.456947] [drm] Loading hainan Microcode
[   14.522670] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_pfp.bin
[   14.533612] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_me.bin
[   14.543103] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_ce.bin
[   14.556178] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_rlc.bin
[   14.556470] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_mc.bin
[   14.566313] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_k_smc.bin
[   14.566323] [drm] Internal thermal controller without fan control
[   14.566495] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[   14.582243] media: Linux media interface: v0.10
[   14.587467] [drm] radeon: dpm initialized
[   14.587475] [drm] GART: num cpu pages 524288, num gpu pages 524288
[   14.594010] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[   14.594015] [drm] PCIE gen 3 link speeds already enabled
[   14.608671] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   14.608801] radeon 0000:01:00.0: WB enabled
[   14.608804] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff9cee26ccdc00
[   14.608805] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff9cee26ccdc04
[   14.608807] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff9cee26ccdc08
[   14.608808] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff9cee26ccdc0c
[   14.608810] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff9cee26ccdc10
[   14.608811] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.608811] [drm] Driver supports precise vblank timestamp query.
[   14.608812] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   14.608856] radeon 0000:01:00.0: radeon: using MSI.
[   14.608872] [drm] radeon: irq initialized.
[   14.620587] input: HP WMI hotkeys as /devices/virtual/input/input10
[   14.769746] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   14.769748] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.769749] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   14.769750] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.769751] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.769753] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[   14.769754] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   14.802693] [drm] ring test on 0 succeeded in 1 usecs
[   14.802698] [drm] ring test on 1 succeeded in 1 usecs
[   14.802702] [drm] ring test on 2 succeeded in 1 usecs
[   14.802710] [drm] ring test on 3 succeeded in 4 usecs
[   14.802716] [drm] ring test on 4 succeeded in 3 usecs
[   14.802882] [drm] ib test on ring 0 succeeded in 0 usecs
[   14.802904] [drm] ib test on ring 1 succeeded in 0 usecs
[   14.802926] [drm] ib test on ring 2 succeeded in 0 usecs
[   14.802942] [drm] ib test on ring 3 succeeded in 0 usecs
[   14.802958] [drm] ib test on ring 4 succeeded in 0 usecs
[   14.803129] [drm] Radeon Display Connectors
[   14.804416] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 1
[   14.846626] [drm] RC6 on
[   14.904036] Linux video capture interface: v2.00
[   15.083882] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   15.085408] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   15.085553] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   15.085697] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   15.085833] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   15.085968] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   15.649546] uvcvideo: Found UVC 1.00 device HP TrueVision HD (05c8:038f)
[   15.654612] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   15.654619] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[   15.654623] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   15.654816] input: HP TrueVision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input17
[   15.654958] usbcore: registered new interface driver uvcvideo
[   15.654959] USB Video Class driver (1.1.1)
[   16.443512] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[   16.473796] rtl8723be 0000:03:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
[   16.561225] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   16.561780] rtlwifi: rtlwifi: wireless switch is on
[   16.564997] rtl8723be 0000:03:00.0 wlo1: renamed from wlan0
[   16.923186] Adding 4108284k swap on /dev/sda5.  Priority:-1 extents:1 across:4108284k FS
[   24.414254] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   24.444668] NFSD: starting 90-second grace period (net ffffffffb24dbe80)
[   24.463625] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.463629] Bluetooth: BNEP filters: protocol multicast
[   24.463636] Bluetooth: BNEP socket layer initialized
[   26.252019] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   26.294418] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[   26.384136] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[   26.384139] [drm] PCIE gen 3 link speeds already enabled
[   26.394342] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   26.394446] radeon 0000:01:00.0: WB enabled
[   26.394448] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff9cee26ccdc00
[   26.394449] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff9cee26ccdc04
[   26.394450] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff9cee26ccdc08
[   26.394451] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff9cee26ccdc0c
[   26.394452] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff9cee26ccdc10
[   26.506395] r8169 0000:02:00.0 enp2s0: link down
[   26.506396] r8169 0000:02:00.0 enp2s0: link down
[   26.506443] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   26.535340] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   26.593163] [drm] ring test on 0 succeeded in 1 usecs
[   26.593168] [drm] ring test on 1 succeeded in 1 usecs
[   26.593172] [drm] ring test on 2 succeeded in 1 usecs
[   26.593180] [drm] ring test on 3 succeeded in 4 usecs
[   26.593187] [drm] ring test on 4 succeeded in 4 usecs
[   26.593218] [drm] ib test on ring 0 succeeded in 0 usecs
[   26.593241] [drm] ib test on ring 1 succeeded in 0 usecs
[   26.593263] [drm] ib test on ring 2 succeeded in 0 usecs
[   26.593275] [drm] ib test on ring 3 succeeded in 0 usecs
[   26.593286] [drm] ib test on ring 4 succeeded in 0 usecs
[   27.106078] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   27.551608] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   28.169891] r8169 0000:02:00.0 enp2s0: link up
[   28.169908] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   28.531679] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   37.837276] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[   41.840131] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[   41.840134] [drm] PCIE gen 3 link speeds already enabled
[   41.850628] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   41.850734] radeon 0000:01:00.0: WB enabled
[   41.850736] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff9cee26ccdc00
[   41.850737] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff9cee26ccdc04
[   41.850738] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff9cee26ccdc08
[   41.850740] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff9cee26ccdc0c
[   41.850741] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff9cee26ccdc10
[   42.042915] [drm] ring test on 0 succeeded in 1 usecs
[   42.042920] [drm] ring test on 1 succeeded in 1 usecs
[   42.042924] [drm] ring test on 2 succeeded in 1 usecs
[   42.042932] [drm] ring test on 3 succeeded in 4 usecs
[   42.042938] [drm] ring test on 4 succeeded in 3 usecs
[   42.042966] [drm] ib test on ring 0 succeeded in 0 usecs
[   42.042989] [drm] ib test on ring 1 succeeded in 0 usecs
[   42.043009] [drm] ib test on ring 2 succeeded in 0 usecs
[   42.043021] [drm] ib test on ring 3 succeeded in 0 usecs
[   42.043032] [drm] ib test on ring 4 succeeded in 0 usecs
[   66.640254] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[   66.640257] [drm] PCIE gen 3 link speeds already enabled
[   66.650192] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   66.650295] radeon 0000:01:00.0: WB enabled
[   66.650297] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff9cee26ccdc00
[   66.650298] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff9cee26ccdc04
[   66.650300] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff9cee26ccdc08
[   66.650301] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff9cee26ccdc0c
[   66.650302] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff9cee26ccdc10
[   66.842543] [drm] ring test on 0 succeeded in 1 usecs
[   66.842548] [drm] ring test on 1 succeeded in 1 usecs
[   66.842552] [drm] ring test on 2 succeeded in 1 usecs
[   66.842560] [drm] ring test on 3 succeeded in 4 usecs
[   66.842566] [drm] ring test on 4 succeeded in 4 usecs
[   66.842594] [drm] ib test on ring 0 succeeded in 0 usecs
[   66.842680] [drm] ib test on ring 1 succeeded in 0 usecs
[   66.842768] [drm] ib test on ring 2 succeeded in 0 usecs
[   66.842781] [drm] ib test on ring 3 succeeded in 0 usecs
[   66.842792] [drm] ib test on ring 4 succeeded in 0 usecs
[  178.146055] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[  178.167194] usb 2-1: New USB device found, idVendor=0bc2, idProduct=61b6
[  178.167200] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  178.167204] usb 2-1: Product: M3
[  178.167208] usb 2-1: Manufacturer: Seagate
[  178.167212] usb 2-1: SerialNumber: NM12HBQ1
[  178.270823] usbcore: registered new interface driver usb-storage
[  178.299526] scsi host2: uas
[  178.299786] usbcore: registered new interface driver uas
[  178.300423] scsi 2:0:0:0: Direct-Access     Seagate  M3               0707 PQ: 0 ANSI: 6
[  178.338597] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  181.180540] sd 2:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[  181.180546] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[  181.181143] sd 2:0:0:0: [sdb] Write Protect is off
[  181.181150] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[  181.181465] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  181.209251]  sdb: sdb1
[  181.211050] sd 2:0:0:0: [sdb] Attached SCSI disk
[  185.041222] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[  228.029674] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[  228.029679] [drm] PCIE gen 3 link speeds already enabled
[  228.048185] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[  228.048303] radeon 0000:01:00.0: WB enabled
[  228.048306] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff9cee26ccdc00
[  228.048308] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff9cee26ccdc04
[  228.048310] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff9cee26ccdc08
[  228.048311] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff9cee26ccdc0c
[  228.048313] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff9cee26ccdc10
[  228.241181] [drm] ring test on 0 succeeded in 1 usecs
[  228.241186] [drm] ring test on 1 succeeded in 1 usecs
[  228.241190] [drm] ring test on 2 succeeded in 1 usecs
[  228.241198] [drm] ring test on 3 succeeded in 4 usecs
[  228.241203] [drm] ring test on 4 succeeded in 3 usecs
[  228.241235] [drm] ib test on ring 0 succeeded in 0 usecs
[  228.241302] [drm] ib test on ring 1 succeeded in 0 usecs
[  228.241329] [drm] ib test on ring 2 succeeded in 0 usecs
[  228.241342] [drm] ib test on ring 3 succeeded in 0 usecs
[  228.241353] [drm] ib test on ring 4 succeeded in 0 usecs
[  371.900728] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready

 



Qu'en pensez-vous ?

Edit à toto : Modif faite - Mis en ordre le BBCode du forum en utilisant le GROS bouton Autre code pour encadrer les lignes de code isolées.

Hors ligne

Pied de page des forums