Debian-facile

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

- OK pour garder la discussion ouverte et faire avancer la science !
- rebelotte avec le clavier : pas moyen de valider mon mot de passe root(le premier ce coup-ci, celui qui fonctionnait bien pour taper les mots de passe) -

setxkbmap fr

cannot open display "default display"

De fait je ne peux pas installer firefox et donc pas poster le log de X

Correction : en appuyant pls fois sur verr num. c'est bon ça à marché !
A suivre...

Dernière modification par kerlap (25-08-2019 16:26:39)

anonyme

Invité

Re : Ecran noir à l'installation de Debian 10

si tu n'a aucun retour de glxinfo -B c'est pas bon idem pour xrandr

lsusb
 

apt-get install firefox-esr firefox-esr-l10n-fr
 

xrandr
 

apt-get install mesa-utils
 

cette commande ne fonctionne pas en root

glxinfo -B
 

nano /etc/default/keyboard
 

le contenu (clavier par defaut )

# KEYBOARD CONFIGURATION FILE

# Consult the keyboard(5) manual page.

XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""

BACKSPACE="guess"
 

apt-get install smartmontools smart-notifier
 

apt-get install acpi acpid acpi-support-base
 

apt-get install lm-sensors
 

la commande en user

sensors
 

cela doit te renvoyer des informations

Dernière modification par anonyme (25-08-2019 17:15:54)

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

Pfff ! Plus d'une demie-heure pour trouver comment installer firefox en commande, je n'avais pas le bon code, puis je ne savais pas comment sortir de la console mais finallement j'ai installé synaptic : re galère pour comprendre comment ça marche et installer firefox (mais sans sélectionner tout ce qui m'était proposé dans synaptic parceque je ne savais pas ce que c'est).
Ensuite j'ai vu le bon code en #102 pour le faire depuis un terminal je me suis dit que j'allais le faire pour être sûr d'avoir tout bien complet mais depuis le terminal ça ne marche plus sûrement un conflit avec synaptic !
Bref ça va prendre un peu de temps avant que je réussisse à faire tous les tests et les poster parce que là c'est trèèèèèèèès laborieux.

anonyme

Invité

Re : Ecran noir à l'installation de Debian 10

tu ferme synaptic et tu lance la commande en console
pour le lsub voici ce que j'ai pour la Z81

Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 046d:c01d Logitech, Inc. MX510 Optical Mouse
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 1a2c:0c21 China Resource Semico Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 

ceci c'est mon clavier basic de marque "bluestork"   =>  Bus 002 Device 002: ID 1a2c:0c21 China Resource Semico Co., Ltd
et ma souris logitech MX510  =>  Bus 005 Device 002: ID 046d:c01d Logitech, Inc. MX510 Optical Mouse

PS: avec le chipset Z87  tu risque d'avoir plus de port usb que moi

faut t' habituer , après ça ira beaucoup mieux
tu met les mains dans le moteur pas évident au début 
enfin moi j'ai toujours pas mes retours de commandes sur 5 pages ?   

et ce n'est que le début , l'audio , l impression , la gestion de l'énergie et j'en oublie
tu a pas finit de faire des commandes en console 

Dernière modification par anonyme (25-08-2019 17:56:38)

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

j'ai fermé synaptic et maintenant ça va beaucoup mieux, je transmet depuis le pc en buster.
synaptic : installé
Firefox : installé et vérifié depuis le terminal donc complet et à jour
mesa-utils : installé
smartmontools smart-notifier : installé
acpi acpid acpi-support-base : installé
lm-sensors : installé
hardinfo : installé
arandr : installé
A suivre les retours ...

Dernière modification par kerlap (25-08-2019 18:48:42)

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

lsusb

Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller
Bus 001 Device 004: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 001 Device 005: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 001 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

sensors

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +39.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:        +36.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:        +38.0°C  (high = +80.0°C, crit = +100.0°C)
Core 2:        +38.0°C  (high = +80.0°C, crit = +100.0°C)
Core 3:        +38.0°C  (high = +80.0°C, crit = +100.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C  (crit = +105.0°C)
temp2:        +29.8°C  (crit = +105.0°C)

asus-isa-0000
Adapter: ISA adapter
cpu_fan:        0 RPM
 

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

nano /etc/default/keyboard

# KEYBOARD CONFIGURATION FILE

# Consult the keyboard(5) manual page.

XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""

BACKSPACE="guess"

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

glxinfo -B

name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Intel Open Source Technology Center (0x8086)
    Device: Mesa DRI Intel(R) Haswell Desktop  (0x412)
    Version: 18.3.6
    Accelerated: yes
    Video memory: 1536MB
    Unified memory: yes
    Preferred profile: core (0x1)
    Max core profile version: 4.5
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.1
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Haswell Desktop
OpenGL core profile version string: 4.5 (Core Profile) Mesa 18.3.6
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 18.3.6
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.1 Mesa 18.3.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10
 

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

xrandr

Screen 0: minimum 8 x 8, current 2730 x 1680, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1050x1680+0+0 left (normal left inverted right x axis y axis) 470mm x 300mm
   1680x1050     59.95*+
   1600x1000     60.01  
   1280x1024     75.02    60.02  
   1440x900      59.90  
   1280x960      60.00  
   1152x864      75.00  
   1024x768      75.03    60.00  
   832x624       74.55  
   800x600       75.00    60.32  
   640x480       75.00    59.94  
   720x400       70.08  
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
VGA1 connected primary 1680x1050+1050+0 (normal left inverted right x axis y axis) 510mm x 290mm
   1920x1080     60.00 +
   1680x1050     59.95*
   1400x1050     59.98  
   1600x900      60.00  
   1280x1024     75.02    60.02  
   1440x900      59.89  
   1280x960      60.00  
   1280x800      59.81  
   1152x864      75.00  
   1280x720      60.00  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    72.81    66.67    59.94  
   720x400       70.08  
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
 

anonyme

Invité

Re : Ecran noir à l'installation de Debian 10

ton clavier est celui la =>  https://www.microsoft.com/accessories/f … /b2m-00002
peut être un peu de configuration a faire pour prendre les touches de fonction , tu ouvrira un autre fil pour ça

je vois 3 appareils sur le même bus , peut être en déplacer un sur une autre prise (du moins tester)
le lecteur de carte est interne ou externe ?

tu a deux écrans sur cette machine , en étendu ou le mode clone ?
comme tu est en auto , je dirai mode étendu

ps: le xorg.conf peu servir aussi a une configuration statique du matériel

installe le paquet arandr

apt-get install arandr
 

en user

arandr
 

tu ferme la fenêtre avec la croix

tu a dans mate : menu => système => préférences => matériel => affichage
au même endroit tu aura aussi "arandr" a partir du bureau

Dernière modification par anonyme (25-08-2019 18:23:22)

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

fdisk -l

root@debian:~# fdisk -l
Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Modèle de disque : WDC WD10EZRZ-00H
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xf557aa53

Périphérique Amorçage      Début        Fin   Secteurs Taille Id Type
/dev/sda1                   2048 1543921663 1543919616 736,2G  7 HPFS/NTFS/exFAT
/dev/sda2             1543921664 1953519615  409597952 195,3G  7 HPFS/NTFS/exFAT


Disque /dev/sdb : 117,4 GiB, 126035288064 octets, 246162672 secteurs
Modèle de disque : SanDisk SDSSDP12
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 61EA7F95-F306-4F62-99D8-574F29B6AA24

Périphérique    Début       Fin  Secteurs Taille Type
/dev/sdb1        2048   1050623   1048576   512M Système EFI
/dev/sdb2     1050624  59643903  58593280    28G Système de fichiers Linux
/dev/sdb3    59643904  76156927  16513024   7,9G Partition d'échange Linux
/dev/sdb4    76156928 246161407 170004480  81,1G Système de fichiers Linux
 

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

hardinfo

Je n'ai pas réussi à remonter toutes les pages de la réponse de commande il doit y avoir une limite, non ?
#114 : génial cet outil !
BIOS :
Date : 08/15/2014
Version : 2103

Dernière modification par kerlap (25-08-2019 18:54:11)

anonyme

Invité

Re : Ecran noir à l'installation de Debian 10

tu est bien en EFI , 28G pour la racine et 81.1G  pour le /home ?

dans le menu de mate a gauche
menu => applications => Outils système => informations et benchmarks du système
hardinfo en graphique

supprime le paste , en graphique donne moi juste la version de ton bios dans "dmi" => "bios" et la date du bios

la documentation de hardinfo

man hardinfo
 

il y a l'option "-r" pour créer un fichier , mais pas la peine , la plupart du temps tu l'utilisera en graphique et en user (pas en root).

Dernière modification par anonyme (25-08-2019 18:42:04)

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

#111 :
ton clavier est celui la =>  https://www.microsoft.com/accessories/f … /b2m-00002
>oui c'est ça

je vois 3 appareils sur le même bus , peut être en déplacer un sur une autre prise
>Ah ?? je regarderai ça.
le lecteur de carte est interne ou externe ?
> interne

tu as deux écrans sur cette machine , en étendu ou le mode clone ?
comme tu est en auto , je dirai mode étendu
> étendu c'est bien ça !

anonyme

Invité

Re : Ecran noir à l'installation de Debian 10

donc déplacé le clavier sur une autre prise et tu vérifie avec lsusb

ceci je pense que c'est interne aussi un hub supplémentaire Alcor

Bus 001 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub
 

a priori c'est lié au lecteur de carte

tu a oublié quelque chose 

journalctl -r -p err
 

et la version du bios que je cherche sur le net (je me souvient plus de celle de mon ancienne carte mais je sais que c'était stable et sans erreur . ).

Dernière modification par anonyme (25-08-2019 19:02:40)

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

J'ai corrigé #113 avec la version du BIOS
Est-ce que tu veux  le résultat de : /var/log/Xorg.0.log
Si oui un paste ou pas paste ? Idem je ne crois pas pouvoir remonter jusqu'au début.

anonyme

Invité

Re : Ecran noir à l'installation de Debian 10

avec un cat ?

cat /var/log/Xorg.0.log
 

ou avec pluma , le gestionnaire de fichier

apt-cache policy pluma
 

pluma:
  Installé : 1.20.4-1
  Candidat : 1.20.4-1
 Table de version :
 *** 1.20.4-1 500
        500 http://ftp.fr.debian.org/debian buster/main amd64 Packages
        100 /var/lib/dpkg/status
 

ps: si il n'est pas installé tu sais comment faire
avec caja tu te place dans le dossier et tu ouvre le fichier avec pluma
un copier coller sur le forum avec les bonnes balises

pour le bios tu a le dernier , pas forcément une bonne chose pour GNU Linux

BIOS :
Date : 08/15/2014
Version : 2103
 

=>  https://www.asus.com/fr/Motherboards/Z8 … Desk_BIOS/

la version minimale est pour ton cpu "1802"

Core i5-4460 (3.2GHz, 4C, L3:6M, HD Graphic, 84W, rev.C0) ALL 1802
 

il y a la version 2005 (éviter les béta)  entre 1802 et 2103

Dernière modification par anonyme (25-08-2019 19:20:12)

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

Avant déplacement du clavier :

journalctl -r -p err

-- Logs begin at Sun 2019-08-25 15:38:34 CEST, end at Sun 2019-08-25 20:03:59 CEST. --
août 25 15:38:34 debian systemd-udevd[334]: event3: Failed to call EVIOCSKEYCODE with scan code 0xc022e
août 25 15:38:34 debian systemd-udevd[334]: event3: Failed to call EVIOCSKEYCODE with scan code 0xc022d
lines 1-3/3 (END)
 

Après déplacement de mon clavier sur usb 3.0

lsusb

Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller
Bus 001 Device 006: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 001 Device 005: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 001 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 

journalctl -r -p err

-- Logs begin at Sun 2019-08-25 15:38:34 CEST, end at Sun 2019-08-25 20:11:50 CEST. --
août 25 20:04:57 debian systemd-udevd[10426]: event3: Failed to call EVIOCSKEYCODE with scan code 0xc02
août 25 20:04:57 debian systemd-udevd[10426]: event3: Failed to call EVIOCSKEYCODE with scan code 0xc02
août 25 15:38:34 debian systemd-udevd[334]: event3: Failed to call EVIOCSKEYCODE with scan code 0xc022e
août 25 15:38:34 debian systemd-udevd[334]: event3: Failed to call EVIOCSKEYCODE with scan code 0xc022d
lines 1-5/5 (END)
 

"ceci je pense que c'est interne aussi un hub supplémentaire Alcor
Bus 001 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub"
> je ne sais pas. J'ai aussi un petit hub usb 4 ports avec la souris branchée dessus.

anonyme

Invité

Re : Ecran noir à l'installation de Debian 10

humm on finit par tout savoir     

moi je vois toujours le clavier sur le bus 001

pour les messages la commande prend les erreurs depuis le dernier démarrage
après un reboot c'est réinitialisé
donc de deux on est passé a 4 messages (débranché , rebranché le clavier)

pour bien faire il faudrait tester sans le petit hub , même débrancher le lecteur de carte
voir si on peu déterminer qui donne ce message , normalement c'est le clavier

a l'arrière sur la carte mère tu dois avoir plusieurs connecteurs USB de disponible

Dernière modification par anonyme (25-08-2019 19:33:23)

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

apt-cache policy pluma

pluma:
  Installé : (aucun)
  Candidat : 1.20.4-1
 Table de version :
     1.20.4-1 500
        500 http://ftp.fr.debian.org/debian buster/main amd64 Packages
 

En root c'est idem.
Et depuis caja j'accède bien au fichier mais sans programme ad hoc pour l'ouvrir ...

J'ai réinitialisé le terminal et je peux maintenant tout voir - c'était l'empilement des commandes successives qui devaient être un peu lourdes.

cat /var/log/Xorg.0.log

[     8.032]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[     8.032] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[     8.032] Current Operating System: Linux debian 4.19.0-5-amd64 #1 SMP Debian 4.19.37-5+deb10u2 (2019-08-08) x86_64
[     8.032] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=db65e155-22df-422e-8ffb-b7eef2d5aacf ro quiet
[     8.032] Build Date: 05 March 2019  08:11:12PM
[     8.032] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[     8.032] Current version of pixman: 0.36.0
[     8.032]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     8.032] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.032] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 25 15:38:39 2019
[     8.033] (==) Using config file: "/etc/X11/xorg.conf"
[     8.033] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     8.037] (==) No Layout section.  Using the first Screen section.
[     8.037] (==) No screen section available. Using defaults.
[     8.037] (**) |-->Screen "Default Screen Section" (0)
[     8.037] (**) |   |-->Monitor "<default monitor>"
[     8.038] (==) No device specified for screen "Default Screen Section".
  Using the first device section listed.
[     8.038] (**) |   |-->Device "Device0"
[     8.038] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     8.038] (==) Automatically adding devices
[     8.038] (==) Automatically enabling devices
[     8.038] (==) Automatically adding GPU devices
[     8.038] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     8.047] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     8.047]  Entry deleted from font path.
[     8.047] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     8.047]  Entry deleted from font path.
[     8.047] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     8.047]  Entry deleted from font path.
[     8.047] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[     8.047]  Entry deleted from font path.
[     8.047] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     8.047]  Entry deleted from font path.
[     8.047] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     8.047]  Entry deleted from font path.
[     8.047] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  built-ins
[     8.047] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.047] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.047] (II) Loader magic: 0x55dd62c17e20
[     8.047] (II) Module ABI versions:
[     8.047]  X.Org ANSI C Emulation: 0.4
[     8.047]  X.Org Video Driver: 24.0
[     8.047]  X.Org XInput driver : 24.1
[     8.047]  X.Org Server Extension : 10.0
[     8.047] (++) using VT number 7

[     8.047] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     8.048] (II) xfree86: Adding drm device (/dev/dri/card0)
[     8.061] (--) PCI:*(0@0:2:0) 8086:0412:1043:8534 rev 6, Mem @ 0xef800000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     8.061] (II) LoadModule: "glx"
[     8.062] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     8.084] (II) Module glx: vendor="X.Org Foundation"
[     8.084]  compiled for 1.20.4, module version = 1.0.0
[     8.084]  ABI class: X.Org Server Extension, version 10.0
[     8.084] (II) LoadModule: "intel"
[     8.084] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     8.089] (II) Module intel: vendor="X.Org Foundation"
[     8.089]  compiled for 1.20.1, module version = 2.99.917
[     8.089]  Module class: X.Org Video Driver
[     8.089]  ABI class: X.Org Video Driver, version 24.0
[     8.089] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     8.089] (II) intel: Driver for Intel(R) HD Graphics
[     8.089] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     8.089] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     8.096] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180719
[     8.096] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20180925-2 (Andreas Boll <aboll@debian.org>)
[     8.096] (II) intel(0): SNA compiled for use with valgrind
[     8.117] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[     8.117] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[     8.117] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     8.117] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     8.117] (==) intel(0): RGB weight 888
[     8.117] (==) intel(0): Default visual is TrueColor
[     8.117] (II) intel(0): Output VGA1 has no monitor section
[     8.117] (II) intel(0): Enabled output VGA1
[     8.117] (II) intel(0): Output HDMI1 has no monitor section
[     8.117] (II) intel(0): Enabled output HDMI1
[     8.117] (II) intel(0): Output DP1 has no monitor section
[     8.117] (II) intel(0): Enabled output DP1
[     8.117] (II) intel(0): Output HDMI2 has no monitor section
[     8.117] (II) intel(0): Enabled output HDMI2
[     8.117] (II) intel(0): Output HDMI3 has no monitor section
[     8.117] (II) intel(0): Enabled output HDMI3
[     8.117] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     8.117] (II) intel(0): Output VIRTUAL1 has no monitor section
[     8.117] (II) intel(0): Enabled output VIRTUAL1
[     8.117] (--) intel(0): Output VGA1 using initial mode 1920x1080 on pipe 1
[     8.117] (--) intel(0): Output HDMI1 using initial mode 1680x1050 on pipe 0
[     8.118] (==) intel(0): TearFree disabled
[     8.118] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.118] (==) intel(0): DPI set to (96, 96)
[     8.118] (II) Loading sub module "dri3"
[     8.118] (II) LoadModule: "dri3"
[     8.118] (II) Module "dri3" already built-in
[     8.118] (II) Loading sub module "dri2"
[     8.118] (II) LoadModule: "dri2"
[     8.118] (II) Module "dri2" already built-in
[     8.118] (II) Loading sub module "present"
[     8.118] (II) LoadModule: "present"
[     8.118] (II) Module "present" already built-in
[     8.122] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     8.122] (==) intel(0): Backing store enabled
[     8.122] (==) intel(0): Silken mouse enabled
[     8.124] (II) intel(0): HW Cursor enabled
[     8.125] (==) intel(0): DPMS enabled
[     8.125] (==) intel(0): Display hotplug detection enabled
[     8.125] (II) intel(0): [DRI2] Setup complete
[     8.125] (II) intel(0): [DRI2]   DRI driver: i965
[     8.125] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     8.125] (II) intel(0): direct rendering: DRI2 enabled
[     8.125] (II) intel(0): hardware support for Present enabled
[     8.125] (II) Initializing extension Generic Event Extension
[     8.125] (II) Initializing extension SHAPE
[     8.126] (II) Initializing extension MIT-SHM
[     8.126] (II) Initializing extension XInputExtension
[     8.126] (II) Initializing extension XTEST
[     8.127] (II) Initializing extension BIG-REQUESTS
[     8.127] (II) Initializing extension SYNC
[     8.127] (II) Initializing extension XKEYBOARD
[     8.127] (II) Initializing extension XC-MISC
[     8.127] (II) Initializing extension SECURITY
[     8.127] (II) Initializing extension XFIXES
[     8.127] (II) Initializing extension RENDER
[     8.127] (II) Initializing extension RANDR
[     8.127] (II) Initializing extension COMPOSITE
[     8.127] (II) Initializing extension DAMAGE
[     8.127] (II) Initializing extension MIT-SCREEN-SAVER
[     8.127] (II) Initializing extension DOUBLE-BUFFER
[     8.128] (II) Initializing extension RECORD
[     8.128] (II) Initializing extension DPMS
[     8.128] (II) Initializing extension Present
[     8.128] (II) Initializing extension DRI3
[     8.128] (II) Initializing extension X-Resource
[     8.128] (II) Initializing extension XVideo
[     8.128] (II) Initializing extension XVideo-MotionCompensation
[     8.128] (II) Initializing extension SELinux
[     8.128] (II) SELinux: Disabled on system
[     8.128] (II) Initializing extension GLX
[     8.173] (II) AIGLX: Loaded and initialized i965
[     8.173] (II) GLX: Initialized DRI2 GL provider for screen 0
[     8.173] (II) Initializing extension XFree86-VidModeExtension
[     8.174] (II) Initializing extension XFree86-DGA
[     8.174] (II) Initializing extension XFree86-DRI
[     8.174] (II) Initializing extension DRI2
[     8.177] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[     8.192] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
[     8.207] (II) intel(0): Setting screen physical size to 508 x 285
[     8.270] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     8.270] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.270] (II) LoadModule: "libinput"
[     8.270] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     8.276] (II) Module libinput: vendor="X.Org Foundation"
[     8.276]  compiled for 1.20.4, module version = 0.28.2
[     8.276]  Module class: X.Org XInput Driver
[     8.276]  ABI class: X.Org XInput driver, version 24.1
[     8.276] (II) Using input driver 'libinput' for 'Power Button'
[     8.276] (**) Power Button: always reports core events
[     8.276] (**) Option "Device" "/dev/input/event1"
[     8.277] (**) Option "_source" "server/udev"
[     8.287] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     8.287] (II) event1  - Power Button: device is a keyboard
[     8.287] (II) event1  - Power Button: device removed
[     8.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     8.304] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.304] (**) Option "xkb_model" "pc105"
[     8.304] (**) Option "xkb_layout" "fr"
[     8.304] (**) Option "xkb_variant" "latin9"
[     8.324] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     8.324] (II) event1  - Power Button: device is a keyboard
[     8.325] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[     8.325] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     8.325] (II) Using input driver 'libinput' for 'Video Bus'
[     8.325] (**) Video Bus: always reports core events
[     8.325] (**) Option "Device" "/dev/input/event2"
[     8.325] (**) Option "_source" "server/udev"
[     8.325] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[     8.325] (II) event2  - Video Bus: device is a keyboard
[     8.325] (II) event2  - Video Bus: device removed
[     8.368] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[     8.368] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.368] (**) Option "xkb_model" "pc105"
[     8.368] (**) Option "xkb_layout" "fr"
[     8.368] (**) Option "xkb_variant" "latin9"
[     8.369] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[     8.369] (II) event2  - Video Bus: device is a keyboard
[     8.370] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     8.370] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.370] (II) Using input driver 'libinput' for 'Power Button'
[     8.370] (**) Power Button: always reports core events
[     8.370] (**) Option "Device" "/dev/input/event0"
[     8.370] (**) Option "_source" "server/udev"
[     8.372] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     8.372] (II) event0  - Power Button: device is a keyboard
[     8.372] (II) event0  - Power Button: device removed
[     8.404] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     8.404] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     8.404] (**) Option "xkb_model" "pc105"
[     8.404] (**) Option "xkb_layout" "fr"
[     8.404] (**) Option "xkb_variant" "latin9"
[     8.406] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     8.406] (II) event0  - Power Button: device is a keyboard
[     8.408] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event10)
[     8.408] (II) No input driver specified, ignoring this device.
[     8.408] (II) This device may have been added with another device file.
[     8.409] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event11)
[     8.409] (II) No input driver specified, ignoring this device.
[     8.409] (II) This device may have been added with another device file.
[     8.410] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[     8.410] (II) No input driver specified, ignoring this device.
[     8.410] (II) This device may have been added with another device file.
[     8.410] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[     8.410] (II) No input driver specified, ignoring this device.
[     8.410] (II) This device may have been added with another device file.
[     8.412] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[     8.412] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[     8.412] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[     8.412] (**) Logitech USB Optical Mouse: always reports core events
[     8.412] (**) Option "Device" "/dev/input/event5"
[     8.412] (**) Option "_source" "server/udev"
[     8.413] (II) event5  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[     8.413] (II) event5  - Logitech USB Optical Mouse: device set to 1000 DPI
[     8.413] (II) event5  - Logitech USB Optical Mouse: device is a pointer
[     8.413] (II) event5  - Logitech USB Optical Mouse: device removed
[     8.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1:1.0/0003:046D:C05A.0003/input/input5/event5"
[     8.444] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[     8.444] (**) Option "AccelerationScheme" "none"
[     8.444] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[     8.444] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[     8.444] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[     8.447] (II) event5  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[     8.447] (II) event5  - Logitech USB Optical Mouse: device set to 1000 DPI
[     8.447] (II) event5  - Logitech USB Optical Mouse: device is a pointer
[     8.448] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[     8.448] (II) No input driver specified, ignoring this device.
[     8.448] (II) This device may have been added with another device file.
[     8.449] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event3)
[     8.449] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[     8.449] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[     8.449] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[     8.449] (**) Option "Device" "/dev/input/event3"
[     8.449] (**) Option "_source" "server/udev"
[     8.452] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[     8.452] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[     8.452] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[     8.468] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:045E:00DB.0001/input/input3/event3"
[     8.468] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 10)
[     8.468] (**) Option "xkb_model" "pc105"
[     8.468] (**) Option "xkb_layout" "fr"
[     8.468] (**) Option "xkb_variant" "latin9"
[     8.470] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[     8.470] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[     8.471] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event4)
[     8.471] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[     8.471] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[     8.471] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[     8.471] (**) Option "Device" "/dev/input/event4"
[     8.471] (**) Option "_source" "server/udev"
[     8.472] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[     8.472] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[     8.473] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[     8.492] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: needs a virtual subdevice
[     8.492] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:045E:00DB.0002/input/input4/event4"
[     8.492] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: MOUSE, id 11)
[     8.492] (**) Option "AccelerationScheme" "none"
[     8.492] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) selected scheme none/0
[     8.492] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[     8.492] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[     8.494] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[     8.494] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[     8.495] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event12)
[     8.495] (II) No input driver specified, ignoring this device.
[     8.495] (II) This device may have been added with another device file.
[     8.495] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event13)
[     8.495] (II) No input driver specified, ignoring this device.
[     8.495] (II) This device may have been added with another device file.
[     8.496] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event14)
[     8.496] (II) No input driver specified, ignoring this device.
[     8.496] (II) This device may have been added with another device file.
[     8.496] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event15)
[     8.496] (II) No input driver specified, ignoring this device.
[     8.496] (II) This device may have been added with another device file.
[     8.497] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event16)
[     8.497] (II) No input driver specified, ignoring this device.
[     8.497] (II) This device may have been added with another device file.
[     8.497] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event17)
[     8.497] (II) No input driver specified, ignoring this device.
[     8.497] (II) This device may have been added with another device file.
[     8.498] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event18)
[     8.498] (II) No input driver specified, ignoring this device.
[     8.498] (II) This device may have been added with another device file.
[     8.498] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event19)
[     8.498] (II) No input driver specified, ignoring this device.
[     8.498] (II) This device may have been added with another device file.
[     8.499] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[     8.499] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     8.499] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     8.499] (**) Eee PC WMI hotkeys: always reports core events
[     8.499] (**) Option "Device" "/dev/input/event7"
[     8.499] (**) Option "_source" "server/udev"
[     8.500] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     8.500] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[     8.500] (II) event7  - Eee PC WMI hotkeys: device removed
[     8.532] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event7"
[     8.532] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[     8.532] (**) Option "xkb_model" "pc105"
[     8.532] (**) Option "xkb_layout" "fr"
[     8.532] (**) Option "xkb_variant" "latin9"
[     8.533] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     8.533] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[     8.534] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     8.534] (II) No input driver specified, ignoring this device.
[     8.534] (II) This device may have been added with another device file.
[     8.574] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[     8.574] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[     8.574] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[     8.574] (**) Option "Device" "/dev/input/event4"
[     8.574] (**) Option "_source" "_driver/libinput"
[     8.574] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: is a virtual subdevice
[     8.574] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:045E:00DB.0002/input/input4/event4"
[     8.574] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 13)
[     8.574] (**) Option "xkb_model" "pc105"
[     8.574] (**) Option "xkb_layout" "fr"
[     8.574] (**) Option "xkb_variant" "latin9"
[   568.831] (II) intel(0): resizing framebuffer to 1920x1680
[   568.864] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 0, position (0, 0), rotation left, reflection none
[   576.383] (II) intel(0): resizing framebuffer to 1920x1080
[   576.400] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[   757.908] (II) intel(0): resizing framebuffer to 3360x1680
[   757.940] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 0, position (0, 0), rotation left, reflection none
[   757.988] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 1, position (1680, 0), rotation normal, reflection none
[   788.862] (II) intel(0): resizing framebuffer to 2730x1680
[   788.879] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 1, position (1050, 0), rotation normal, reflection none
[   821.610] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 0, position (1050, 0), rotation normal, reflection none
[   821.711] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 1, position (0, 0), rotation left, reflection none
[  5494.758] (II) event1  - Power Button: device removed
[  5494.773] (II) event2  - Video Bus: device removed
[  5494.804] (II) event0  - Power Button: device removed
[  5494.820] (II) event5  - Logitech USB Optical Mouse: device removed
[  5494.852] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[  5494.869] (II) event7  - Eee PC WMI hotkeys: device removed
[  5494.904] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[  5494.920] (II) AIGLX: Suspending AIGLX clients for VT switch
[  7730.528] (II) AIGLX: Resuming AIGLX clients after VT switch
[  7730.528] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 0, position (1050, 0), rotation normal, reflection none
[  7730.655] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 1, position (0, 0), rotation left, reflection none
[  7730.773] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  7730.773] (II) event1  - Power Button: device is a keyboard
[  7730.776] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[  7730.776] (II) event2  - Video Bus: device is a keyboard
[  7730.777] (II) event0  - Power Button: is tagged by udev as: Keyboard
[  7730.777] (II) event0  - Power Button: device is a keyboard
[  7730.780] (II) event5  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[  7730.780] (II) event5  - Logitech USB Optical Mouse: device set to 1000 DPI
[  7730.780] (II) event5  - Logitech USB Optical Mouse: device is a pointer
[  7730.782] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[  7730.782] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[  7730.783] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[  7730.783] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[  7730.784] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[  7730.784] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[  8633.498] (II) event1  - Power Button: device removed
[  8633.513] (II) event2  - Video Bus: device removed
[  8633.545] (II) event0  - Power Button: device removed
[  8633.560] (II) event5  - Logitech USB Optical Mouse: device removed
[  8633.592] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[  8633.617] (II) event7  - Eee PC WMI hotkeys: device removed
[  8633.649] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[  8633.664] (II) AIGLX: Suspending AIGLX clients for VT switch
[  8766.568] (II) AIGLX: Resuming AIGLX clients after VT switch
[  8766.568] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 0, position (1050, 0), rotation normal, reflection none
[  8766.689] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 1, position (0, 0), rotation left, reflection none
[  8766.808] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  8766.808] (II) event1  - Power Button: device is a keyboard
[  8766.811] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[  8766.811] (II) event2  - Video Bus: device is a keyboard
[  8766.813] (II) event0  - Power Button: is tagged by udev as: Keyboard
[  8766.813] (II) event0  - Power Button: device is a keyboard
[  8766.816] (II) event5  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[  8766.816] (II) event5  - Logitech USB Optical Mouse: device set to 1000 DPI
[  8766.816] (II) event5  - Logitech USB Optical Mouse: device is a pointer
[  8766.818] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[  8766.818] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[  8766.819] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[  8766.819] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[  8766.819] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[  8766.820] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[ 15980.341] (II) config/udev: removing device Microsoft Natural® Ergonomic Keyboard 4000
[ 15980.342] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[ 15980.365] (II) UnloadModule: "libinput"
[ 15980.402] (II) config/udev: removing device Microsoft Natural® Ergonomic Keyboard 4000
[ 15980.403] (II) UnloadModule: "libinput"
[ 15980.403] (II) config/udev: removing device Microsoft Natural® Ergonomic Keyboard 4000
[ 15980.403] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[ 15980.421] (II) UnloadModule: "libinput"
[ 15985.164] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event3)
[ 15985.164] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[ 15985.164] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 15985.165] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 15985.165] (**) Option "Device" "/dev/input/event3"
[ 15985.165] (**) Option "_source" "server/udev"
[ 15985.166] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[ 15985.166] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[ 15985.166] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[ 15985.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:045E:00DB.0004/input/input20/event3"
[ 15985.184] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 10)
[ 15985.184] (**) Option "xkb_model" "pc105"
[ 15985.184] (**) Option "xkb_layout" "fr"
[ 15985.184] (**) Option "xkb_variant" "latin9"
[ 15985.184] (WW) Option "xkb_options" requires a string value
[ 15985.187] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[ 15985.187] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[ 15985.204] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event4)
[ 15985.204] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[ 15985.204] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 15985.204] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 15985.204] (**) Option "Device" "/dev/input/event4"
[ 15985.204] (**) Option "_source" "server/udev"
[ 15985.205] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[ 15985.205] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[ 15985.205] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[ 15985.224] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: needs a virtual subdevice
[ 15985.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:045E:00DB.0005/input/input21/event4"
[ 15985.224] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: MOUSE, id 11)
[ 15985.225] (**) Option "AccelerationScheme" "none"
[ 15985.226] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) selected scheme none/0
[ 15985.226] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[ 15985.226] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[ 15985.227] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[ 15985.227] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[ 15985.228] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[ 15985.228] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 15985.228] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 15985.228] (**) Option "Device" "/dev/input/event4"
[ 15985.228] (**) Option "_source" "_driver/libinput"
[ 15985.228] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: is a virtual subdevice
[ 15985.228] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:045E:00DB.0005/input/input21/event4"
[ 15985.228] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 13)
[ 15985.228] (**) Option "xkb_model" "pc105"
[ 15985.228] (**) Option "xkb_layout" "fr"
[ 15985.228] (**) Option "xkb_variant" "latin9"
[ 15985.228] (WW) Option "xkb_options" requires a string value
 

Debian Alain

Membre

Lieu : Bretagne

Distrib. : sid (unstable) / bullseye (stable)

Noyau : Linux sid 6.4.0-3-amd64

(G)UI : Gnome X.org (X11) / GDM3

Inscription : 11-03-2017

Site Web

Re : Ecran noir à l'installation de Debian 10

bonsoir kerlap

tu as pensé à çà :  https://www.amazon.fr/Logitech-Desktop- … 152&sr=8-3  ???

vu les problèmes que tu as avec ton clavier  ... peut être ...  ???

---

+ -- Les Cahiers du Débutant (Bullseye) -- + -- Les Cahiers de l'Admin (buster) -- +

+ (ISOs Debian Facile) + -- Les Commandes Linux (D - F) -- +

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

"il y a la version 2005 (éviter les béta)  entre 1802 et 2103 "
> Ce qui veut dire qu'il y a bien une mise à jour de la carte mère possible ?
ok je déconnecte tout ce que je peux. J'ai effectivement des ports usb attachés à la carte mère.

anonyme

Invité

Re : Ecran noir à l'installation de Debian 10

Avec le log de X on  voit bien le clavier microsoft , a mon avis il y a quelque chose a faire mais pas assez calé pour ça 

sinon pour t'amuser , tu remplace dans /etc/X11/xorg.conf le nom du driver "intel" par "modesetting"
tu dois avoir un bel écran noir , il te suffit de remettre "intel" et de redémarrer pour revenir correct
avec Wayland , le bug du noyau, ton PC ne pourra pas fonctionner.
la nuance c'est que en modeset tu utilise le driver du noyau
en intel tu utilise le paquet xserver-xorg-vidéo-intel du serveur X
je sais pas si ce bug est présent sur debian ( répertorié ) .

kerlap

Membre

Distrib. : Buster

Noyau : Linux 4.19.0-5-amd64

(G)UI : Mate

Inscription : 21-08-2019

Re : Ecran noir à l'installation de Debian 10

Bonsoir Debian Alain

J'ai un autre clavier et en le branchant sur le pc j'ai le même message d'erreur.

Merci pour le lien mais Amazon quand mêêêême !

Je vais manger ...

Dernière modification par kerlap (25-08-2019 19:49:40)