Vous n'êtes pas identifié(e).
Pages : 1
Du coup, j'ai suivi le conseil et fait
C'est réparable ou direction poubelle ?
Oh, et si ça peut aider :
Dernière modification par autrekrikri (26-01-2020 18:16:29)
Hors ligne
Dernière modification par raleur (26-01-2020 18:26:00)
Il vaut mieux montrer que raconter.
Hors ligne
D'après fdisk, sdb1 est une partition étendue. Ça ne se monte pas. Essaie plutôt sdb5.
Bonsoir,
alors, évidemment, j'ai débranché des disques ...
Bon, celui que je cherche fait 500Go.
C'est donc soit sda soit sdd.
Comme
tourne dans le vide, ça doit être celui-ci ...
Du coup, je peux faire quoi ?
[edit]OK, alors, là, il y a un plus gros soucis, car je ne peux plus rien monter ...
Dernière modification par autrekrikri (26-01-2020 19:06:26)
Hors ligne
Il vaut mieux montrer que raconter.
Hors ligne
Tu peux utiliser smartctl -a pour avoir un diagnostic d'un disque.
Je le lance avec quel dd ?
ici avec sdb :
et là avec sda :
Alors, dans mes souvenirs c'était le toshiba qui avait mes données.
Dernière modification par autrekrikri (26-01-2020 19:29:15)
Hors ligne
Une chose est sûre : sda (Toshiba) est au bout du rouleau. Il a épuisé tout son stock de secteurs de réserve pour réallouer des secteurs défectueux. Il doit être remplacé au plus vite.
Néanmoins il ne semble pas avoir de secteurs illisibles actuellement (current pending et offline uncorrectable à 0).
Il vaut mieux montrer que raconter.
Hors ligne
5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 1520
Une chose est sûre : sda (Toshiba) est au bout du rouleau. Il a épuisé tout son stock de secteurs de réserve pour réallouer des secteurs défectueux. Il doit être remplacé au plus vite.
Néanmoins il ne semble pas avoir de secteurs illisibles actuellement (current pending et offline uncorrectable à 0).
En effet, il n'est pas tout jeune, je vais en acheter un autre pour le remplacer. Mais j'aimerai récupérer mes données ...
Du coup, je ne vois pas quoi faire ...
Dernière modification par autrekrikri (26-01-2020 19:44:50)
Hors ligne
Il vaut mieux montrer que raconter.
Hors ligne
D'après smartctl il reste lisible. Quel est le problème ? Montre des commandes, leurs retours, les logs du noyau...
Comme dit dans un message plus haut :
Lorsque je tape la commande, je valide, tape mon mdp et ... rien ne se passe, pas de retour rien, je ne peux même pas taper de nouvelle commande. Là, par exemple, ça fait plus de deux minutes que : rien ...
Par contre, les logs du noyau, je sais pas faire ...
Dernière modification par autrekrikri (26-01-2020 20:41:53)
Hors ligne
Par contre, les logs du noyau, je sais pas faire
Ben si, avec dmesg comme dans ton premier post.
Il vaut mieux montrer que raconter.
Hors ligne
autrekrikri a écrit :Par contre, les logs du noyau, je sais pas faire
Ben si, avec dmesg comme dans ton premier post.
Ah, OK, je ne savais pas ce que c'était :-)
je n'ai pas réussi à tout copier ... Désolé
En effet, ça parle de sda, mais je ne comprend rien ...
Dernière modification par autrekrikri (26-01-2020 21:04:33)
Hors ligne
Il vaut mieux montrer que raconter.
Hors ligne
Je ne comprends pas tout non plus mais on dirait que le disque ne répond plus. Peut-être un arrêt et démarrage lui fera du bien ?
Alors, déjà fait deux fois ...
Hors ligne
Il vaut mieux montrer que raconter.
Hors ligne
Et fdisk et smartctl marchent encore avec ce disque ? Etonnant.
Ah, du coup, c'est mourru mourru ?
Hors ligne
Dernière modification par raleur (26-01-2020 21:40:31)
Il vaut mieux montrer que raconter.
Hors ligne
Je n'ai pas dit ça. En ce moment, fdisk et smartctl marchent encore ou c'était avant ?
Et bien fdisk me ressort :
je dirai donc oui, de même pour smartctl
Hors ligne
- pour kern.log :
- pour syslog :
"tail -n 100" affiche les 100 dernières lignes
"grep sda" affiche les lignes contenant "sda"
Dernière modification par Debian Alain (26-01-2020 22:10:41)
Hors ligne
Il vaut mieux montrer que raconter.
Hors ligne
pour les logs , tu peux essayer ceci :
- pour dmesg :dmesg | tail -n 100
[ 3632.826943] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3632.832542] ata3.00: configured for UDMA/33
[ 3632.832546] ata3.00: device reported invalid CHS sector 0
[ 3632.832552] ata3: EH complete
[ 3663.232432] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3663.232436] ata3.00: failed command: READ DMA EXT
[ 3663.232440] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 20 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3663.232442] ata3.00: status: { DRDY }
[ 3663.232445] ata3: hard resetting link
[ 3663.546699] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3663.552149] ata3.00: configured for UDMA/33
[ 3663.552153] ata3.00: device reported invalid CHS sector 0
[ 3663.552159] ata3: EH complete
[ 3696.000105] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3696.000113] ata3.00: failed command: READ DMA EXT
[ 3696.000121] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 6 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3696.000125] ata3.00: status: { DRDY }
[ 3696.000130] ata3: hard resetting link
[ 3696.314495] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3696.318586] ata3.00: configured for UDMA/33
[ 3696.318592] ata3.00: device reported invalid CHS sector 0
[ 3696.318604] sd 2:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3696.318608] sd 2:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current]
[ 3696.318611] sd 2:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
[ 3696.318616] sd 2:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
[ 3696.318618] blk_update_request: I/O error, dev sda, sector 976772352
[ 3696.318646] ata3: EH complete
[ 4088.685781] systemd[1]: apt-daily.timer: Adding 27min 33.362517s random time.
[ 4088.685863] systemd[1]: anacron.timer: Adding 1min 41.007137s random time.
[ 4088.922422] systemd[1]: apt-daily.timer: Adding 11h 46min 56.311886s random time.
[ 4088.922502] systemd[1]: anacron.timer: Adding 1min 46.139424s random time.
[ 4088.970110] systemd[1]: apt-daily.timer: Adding 3h 57min 21.229603s random time.
[ 4088.970204] systemd[1]: anacron.timer: Adding 3.004989s random time.
[ 4089.016472] systemd[1]: apt-daily.timer: Adding 3h 5min 57.972645s random time.
[ 4089.016555] systemd[1]: anacron.timer: Adding 3min 19.350173s random time.
[ 4089.078593] systemd[1]: apt-daily.timer: Adding 3h 19min 40.129849s random time.
[ 4089.078674] systemd[1]: anacron.timer: Adding 2min 1.172419s random time.
[ 9313.632436] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9313.632440] ata3.00: failed command: READ DMA EXT
[ 9313.632445] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 8 dma 131072 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9313.632447] ata3.00: status: { DRDY }
[ 9313.632449] ata3: hard resetting link
[ 9313.946722] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9313.950792] ata3.00: configured for UDMA/33
[ 9313.950802] ata3: EH complete
[ 9344.352251] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9344.352255] ata3.00: failed command: READ DMA EXT
[ 9344.352260] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 10 dma 131072 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9344.352262] ata3.00: status: { DRDY }
[ 9344.352265] ata3: hard resetting link
[ 9344.666503] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9344.671968] ata3.00: configured for UDMA/33
[ 9344.671979] ata3: EH complete
[ 9377.120023] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9377.120028] ata3.00: failed command: READ DMA EXT
[ 9377.120032] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 27 dma 131072 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9377.120034] ata3.00: status: { DRDY }
[ 9377.120037] ata3: hard resetting link
[ 9377.434248] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9377.438214] ata3.00: configured for UDMA/33
[ 9377.438224] ata3: EH complete
[ 9409.887873] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9409.887877] ata3.00: failed command: READ DMA EXT
[ 9409.887882] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 13 dma 131072 in
res 40/00:00:00:f4:2c/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9409.887883] ata3.00: status: { DRDY }
[ 9409.887886] ata3: hard resetting link
[ 9410.202054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9410.205959] ata3.00: configured for UDMA/33
[ 9410.205973] ata3: EH complete
[ 9415.703283] perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 9442.659508] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9442.659513] ata3.00: failed command: READ DMA EXT
[ 9442.659517] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 30 dma 131072 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9442.659519] ata3.00: status: { DRDY }
[ 9442.659522] ata3: hard resetting link
[ 9442.973801] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9442.977947] ata3.00: configured for UDMA/33
[ 9442.977961] ata3: EH complete
[ 9473.375351] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9473.375358] ata3.00: failed command: READ DMA EXT
[ 9473.375367] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 16 dma 131072 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9473.375371] ata3.00: status: { DRDY }
[ 9473.375376] ata3: hard resetting link
[ 9473.690116] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9473.695758] ata3.00: configured for UDMA/33
[ 9473.695775] sd 2:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9473.695779] sd 2:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current]
[ 9473.695782] sd 2:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
[ 9473.695786] sd 2:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
[ 9473.695789] blk_update_request: I/O error, dev sda, sector 976772352
[ 9473.695811] ata3: EH complete
[13404.313712] perf: interrupt took too long (3191 > 3143), lowering kernel.perf_event_max_sample_rate to 62500
dmesg | tail -n 100 | grep sda
[ 3696.318604] sd 2:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3696.318608] sd 2:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current]
[ 3696.318611] sd 2:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
[ 3696.318616] sd 2:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
[ 3696.318618] blk_update_request: I/O error, dev sda, sector 976772352
[ 9473.695775] sd 2:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9473.695779] sd 2:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current]
[ 9473.695782] sd 2:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
[ 9473.695786] sd 2:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
[ 9473.695789] blk_update_request: I/O error, dev sda, sector 976772352
- pour kern.log :cat /var/log/kern.log | tail -n 100
Jan 26 19:05:08 bureau kernel: [ 3602.111219] ata3.00: configured for UDMA/100
Jan 26 19:05:08 bureau kernel: [ 3602.111229] ata3.00: device reported invalid CHS sector 0
Jan 26 19:05:08 bureau kernel: [ 3602.111247] ata3: EH complete
Jan 26 19:05:39 bureau kernel: [ 3632.512732] ata3.00: limiting speed to UDMA/33:PIO4
Jan 26 19:05:39 bureau kernel: [ 3632.512735] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 19:05:39 bureau kernel: [ 3632.512740] ata3.00: failed command: READ DMA EXT
Jan 26 19:05:39 bureau kernel: [ 3632.512745] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 2 dma 131072 in
Jan 26 19:05:39 bureau kernel: [ 3632.512745] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 19:05:39 bureau kernel: [ 3632.512748] ata3.00: status: { DRDY }
Jan 26 19:05:39 bureau kernel: [ 3632.512751] ata3: hard resetting link
Jan 26 19:05:39 bureau kernel: [ 3632.826943] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 19:05:39 bureau kernel: [ 3632.832542] ata3.00: configured for UDMA/33
Jan 26 19:05:39 bureau kernel: [ 3632.832546] ata3.00: device reported invalid CHS sector 0
Jan 26 19:05:39 bureau kernel: [ 3632.832552] ata3: EH complete
Jan 26 19:06:09 bureau kernel: [ 3663.232432] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 19:06:09 bureau kernel: [ 3663.232436] ata3.00: failed command: READ DMA EXT
Jan 26 19:06:09 bureau kernel: [ 3663.232440] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 20 dma 131072 in
Jan 26 19:06:09 bureau kernel: [ 3663.232440] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 19:06:09 bureau kernel: [ 3663.232442] ata3.00: status: { DRDY }
Jan 26 19:06:09 bureau kernel: [ 3663.232445] ata3: hard resetting link
Jan 26 19:06:10 bureau kernel: [ 3663.546699] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 19:06:10 bureau kernel: [ 3663.552149] ata3.00: configured for UDMA/33
Jan 26 19:06:10 bureau kernel: [ 3663.552153] ata3.00: device reported invalid CHS sector 0
Jan 26 19:06:10 bureau kernel: [ 3663.552159] ata3: EH complete
Jan 26 19:06:42 bureau kernel: [ 3696.000105] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 19:06:42 bureau kernel: [ 3696.000113] ata3.00: failed command: READ DMA EXT
Jan 26 19:06:42 bureau kernel: [ 3696.000121] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 6 dma 131072 in
Jan 26 19:06:42 bureau kernel: [ 3696.000121] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 19:06:42 bureau kernel: [ 3696.000125] ata3.00: status: { DRDY }
Jan 26 19:06:42 bureau kernel: [ 3696.000130] ata3: hard resetting link
Jan 26 19:06:43 bureau kernel: [ 3696.314495] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 19:06:43 bureau kernel: [ 3696.318586] ata3.00: configured for UDMA/33
Jan 26 19:06:43 bureau kernel: [ 3696.318592] ata3.00: device reported invalid CHS sector 0
Jan 26 19:06:43 bureau kernel: [ 3696.318604] sd 2:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 26 19:06:43 bureau kernel: [ 3696.318608] sd 2:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current]
Jan 26 19:06:43 bureau kernel: [ 3696.318611] sd 2:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
Jan 26 19:06:43 bureau kernel: [ 3696.318616] sd 2:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
Jan 26 19:06:43 bureau kernel: [ 3696.318618] blk_update_request: I/O error, dev sda, sector 976772352
Jan 26 19:06:43 bureau kernel: [ 3696.318646] ata3: EH complete
Jan 26 20:40:20 bureau kernel: [ 9313.632436] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:40:20 bureau kernel: [ 9313.632440] ata3.00: failed command: READ DMA EXT
Jan 26 20:40:20 bureau kernel: [ 9313.632445] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 8 dma 131072 in
Jan 26 20:40:20 bureau kernel: [ 9313.632445] res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:40:20 bureau kernel: [ 9313.632447] ata3.00: status: { DRDY }
Jan 26 20:40:20 bureau kernel: [ 9313.632449] ata3: hard resetting link
Jan 26 20:40:20 bureau kernel: [ 9313.946722] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:40:20 bureau kernel: [ 9313.950792] ata3.00: configured for UDMA/33
Jan 26 20:40:20 bureau kernel: [ 9313.950802] ata3: EH complete
Jan 26 20:40:51 bureau kernel: [ 9344.352251] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:40:51 bureau kernel: [ 9344.352255] ata3.00: failed command: READ DMA EXT
Jan 26 20:40:51 bureau kernel: [ 9344.352260] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 10 dma 131072 in
Jan 26 20:40:51 bureau kernel: [ 9344.352260] res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:40:51 bureau kernel: [ 9344.352262] ata3.00: status: { DRDY }
Jan 26 20:40:51 bureau kernel: [ 9344.352265] ata3: hard resetting link
Jan 26 20:40:51 bureau kernel: [ 9344.666503] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:40:51 bureau kernel: [ 9344.671968] ata3.00: configured for UDMA/33
Jan 26 20:40:51 bureau kernel: [ 9344.671979] ata3: EH complete
Jan 26 20:41:23 bureau kernel: [ 9377.120023] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:41:23 bureau kernel: [ 9377.120028] ata3.00: failed command: READ DMA EXT
Jan 26 20:41:23 bureau kernel: [ 9377.120032] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 27 dma 131072 in
Jan 26 20:41:23 bureau kernel: [ 9377.120032] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:41:23 bureau kernel: [ 9377.120034] ata3.00: status: { DRDY }
Jan 26 20:41:23 bureau kernel: [ 9377.120037] ata3: hard resetting link
Jan 26 20:41:24 bureau kernel: [ 9377.434248] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:41:24 bureau kernel: [ 9377.438214] ata3.00: configured for UDMA/33
Jan 26 20:41:24 bureau kernel: [ 9377.438224] ata3: EH complete
Jan 26 20:41:56 bureau kernel: [ 9409.887873] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:41:56 bureau kernel: [ 9409.887877] ata3.00: failed command: READ DMA EXT
Jan 26 20:41:56 bureau kernel: [ 9409.887882] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 13 dma 131072 in
Jan 26 20:41:56 bureau kernel: [ 9409.887882] res 40/00:00:00:f4:2c/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:41:56 bureau kernel: [ 9409.887883] ata3.00: status: { DRDY }
Jan 26 20:41:56 bureau kernel: [ 9409.887886] ata3: hard resetting link
Jan 26 20:41:56 bureau kernel: [ 9410.202054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:41:56 bureau kernel: [ 9410.205959] ata3.00: configured for UDMA/33
Jan 26 20:41:56 bureau kernel: [ 9410.205973] ata3: EH complete
Jan 26 20:42:02 bureau kernel: [ 9415.703283] perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
Jan 26 20:42:29 bureau kernel: [ 9442.659508] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:42:29 bureau kernel: [ 9442.659513] ata3.00: failed command: READ DMA EXT
Jan 26 20:42:29 bureau kernel: [ 9442.659517] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 30 dma 131072 in
Jan 26 20:42:29 bureau kernel: [ 9442.659517] res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:42:29 bureau kernel: [ 9442.659519] ata3.00: status: { DRDY }
Jan 26 20:42:29 bureau kernel: [ 9442.659522] ata3: hard resetting link
Jan 26 20:42:29 bureau kernel: [ 9442.973801] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:42:29 bureau kernel: [ 9442.977947] ata3.00: configured for UDMA/33
Jan 26 20:42:29 bureau kernel: [ 9442.977961] ata3: EH complete
Jan 26 20:43:00 bureau kernel: [ 9473.375351] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:43:00 bureau kernel: [ 9473.375358] ata3.00: failed command: READ DMA EXT
Jan 26 20:43:00 bureau kernel: [ 9473.375367] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 16 dma 131072 in
Jan 26 20:43:00 bureau kernel: [ 9473.375367] res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:43:00 bureau kernel: [ 9473.375371] ata3.00: status: { DRDY }
Jan 26 20:43:00 bureau kernel: [ 9473.375376] ata3: hard resetting link
Jan 26 20:43:00 bureau kernel: [ 9473.690116] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:43:00 bureau kernel: [ 9473.695758] ata3.00: configured for UDMA/33
Jan 26 20:43:00 bureau kernel: [ 9473.695775] sd 2:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 26 20:43:00 bureau kernel: [ 9473.695779] sd 2:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current]
Jan 26 20:43:00 bureau kernel: [ 9473.695782] sd 2:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
Jan 26 20:43:00 bureau kernel: [ 9473.695786] sd 2:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
Jan 26 20:43:00 bureau kernel: [ 9473.695789] blk_update_request: I/O error, dev sda, sector 976772352
Jan 26 20:43:00 bureau kernel: [ 9473.695811] ata3: EH complete
Jan 26 21:48:31 bureau kernel: [13404.313712] perf: interrupt took too long (3191 > 3143), lowering kernel.perf_event_max_sample_rate to 62500
cat /var/log/kern.log | tail -n 100 | grep sda
Jan 26 19:06:43 bureau kernel: [ 3696.318604] sd 2:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 26 19:06:43 bureau kernel: [ 3696.318608] sd 2:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current]
Jan 26 19:06:43 bureau kernel: [ 3696.318611] sd 2:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
Jan 26 19:06:43 bureau kernel: [ 3696.318616] sd 2:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
Jan 26 19:06:43 bureau kernel: [ 3696.318618] blk_update_request: I/O error, dev sda, sector 976772352
Jan 26 20:43:00 bureau kernel: [ 9473.695775] sd 2:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 26 20:43:00 bureau kernel: [ 9473.695779] sd 2:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current]
Jan 26 20:43:00 bureau kernel: [ 9473.695782] sd 2:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
Jan 26 20:43:00 bureau kernel: [ 9473.695786] sd 2:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
Jan 26 20:43:00 bureau kernel: [ 9473.695789] blk_update_request: I/O error, dev sda, sector 976772352
- pour syslog :cat /var/log/syslog | tail -n 100
Jan 26 20:13:21 bureau smartd[1661]: Device: /dev/sda [SAT], Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
Jan 26 20:17:01 bureau CRON[31825]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 26 20:40:20 bureau kernel: [ 9313.632436] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:40:20 bureau kernel: [ 9313.632440] ata3.00: failed command: READ DMA EXT
Jan 26 20:40:20 bureau kernel: [ 9313.632445] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 8 dma 131072 in
Jan 26 20:40:20 bureau kernel: [ 9313.632445] res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:40:20 bureau kernel: [ 9313.632447] ata3.00: status: { DRDY }
Jan 26 20:40:20 bureau kernel: [ 9313.632449] ata3: hard resetting link
Jan 26 20:40:20 bureau kernel: [ 9313.946722] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:40:20 bureau kernel: [ 9313.950792] ata3.00: configured for UDMA/33
Jan 26 20:40:20 bureau kernel: [ 9313.950802] ata3: EH complete
Jan 26 20:40:51 bureau kernel: [ 9344.352251] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:40:51 bureau kernel: [ 9344.352255] ata3.00: failed command: READ DMA EXT
Jan 26 20:40:51 bureau kernel: [ 9344.352260] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 10 dma 131072 in
Jan 26 20:40:51 bureau kernel: [ 9344.352260] res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:40:51 bureau kernel: [ 9344.352262] ata3.00: status: { DRDY }
Jan 26 20:40:51 bureau kernel: [ 9344.352265] ata3: hard resetting link
Jan 26 20:40:51 bureau kernel: [ 9344.666503] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:40:51 bureau kernel: [ 9344.671968] ata3.00: configured for UDMA/33
Jan 26 20:40:51 bureau kernel: [ 9344.671979] ata3: EH complete
Jan 26 20:41:23 bureau kernel: [ 9377.120023] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:41:23 bureau kernel: [ 9377.120028] ata3.00: failed command: READ DMA EXT
Jan 26 20:41:23 bureau kernel: [ 9377.120032] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 27 dma 131072 in
Jan 26 20:41:23 bureau kernel: [ 9377.120032] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:41:23 bureau kernel: [ 9377.120034] ata3.00: status: { DRDY }
Jan 26 20:41:23 bureau kernel: [ 9377.120037] ata3: hard resetting link
Jan 26 20:41:24 bureau kernel: [ 9377.434248] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:41:24 bureau kernel: [ 9377.438214] ata3.00: configured for UDMA/33
Jan 26 20:41:24 bureau kernel: [ 9377.438224] ata3: EH complete
Jan 26 20:41:56 bureau kernel: [ 9409.887873] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:41:56 bureau kernel: [ 9409.887877] ata3.00: failed command: READ DMA EXT
Jan 26 20:41:56 bureau kernel: [ 9409.887882] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 13 dma 131072 in
Jan 26 20:41:56 bureau kernel: [ 9409.887882] res 40/00:00:00:f4:2c/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:41:56 bureau kernel: [ 9409.887883] ata3.00: status: { DRDY }
Jan 26 20:41:56 bureau kernel: [ 9409.887886] ata3: hard resetting link
Jan 26 20:41:56 bureau kernel: [ 9410.202054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:41:56 bureau kernel: [ 9410.205959] ata3.00: configured for UDMA/33
Jan 26 20:41:56 bureau kernel: [ 9410.205973] ata3: EH complete
Jan 26 20:42:02 bureau kernel: [ 9415.703283] perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
Jan 26 20:42:29 bureau kernel: [ 9442.659508] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:42:29 bureau kernel: [ 9442.659513] ata3.00: failed command: READ DMA EXT
Jan 26 20:42:29 bureau kernel: [ 9442.659517] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 30 dma 131072 in
Jan 26 20:42:29 bureau kernel: [ 9442.659517] res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:42:29 bureau kernel: [ 9442.659519] ata3.00: status: { DRDY }
Jan 26 20:42:29 bureau kernel: [ 9442.659522] ata3: hard resetting link
Jan 26 20:42:29 bureau kernel: [ 9442.973801] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:42:29 bureau kernel: [ 9442.977947] ata3.00: configured for UDMA/33
Jan 26 20:42:29 bureau kernel: [ 9442.977961] ata3: EH complete
Jan 26 20:43:00 bureau kernel: [ 9473.375351] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 26 20:43:00 bureau kernel: [ 9473.375358] ata3.00: failed command: READ DMA EXT
Jan 26 20:43:00 bureau kernel: [ 9473.375367] ata3.00: cmd 25/00:00:00:5d:38/00:01:3a:00:00/e0 tag 16 dma 131072 in
Jan 26 20:43:00 bureau kernel: [ 9473.375367] res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 26 20:43:00 bureau kernel: [ 9473.375371] ata3.00: status: { DRDY }
Jan 26 20:43:00 bureau kernel: [ 9473.375376] ata3: hard resetting link
Jan 26 20:43:00 bureau kernel: [ 9473.690116] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jan 26 20:43:00 bureau kernel: [ 9473.695758] ata3.00: configured for UDMA/33
Jan 26 20:43:00 bureau kernel: [ 9473.695775] sd 2:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 26 20:43:00 bureau kernel: [ 9473.695779] sd 2:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current]
Jan 26 20:43:00 bureau kernel: [ 9473.695782] sd 2:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
Jan 26 20:43:00 bureau kernel: [ 9473.695786] sd 2:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 3a 38 5d 00 00 01 00 00
Jan 26 20:43:00 bureau kernel: [ 9473.695789] blk_update_request: I/O error, dev sda, sector 976772352
Jan 26 20:43:00 bureau kernel: [ 9473.695811] ata3: EH complete
Jan 26 20:43:21 bureau smartd[1661]: Device: /dev/sda [SAT], FAILED SMART self-check. BACK UP DATA NOW!
Jan 26 20:43:21 bureau smartd[1661]: Device: /dev/sda [SAT], Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
Jan 26 20:43:21 bureau smartd[1661]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 181
Jan 26 21:04:36 bureau systemd[1]: Started Run anacron jobs.
Jan 26 21:04:36 bureau anacron[21843]: Anacron 2.3 started on 2020-01-26
Jan 26 21:04:36 bureau anacron[21843]: Normal exit (0 jobs run)
Jan 26 21:04:36 bureau systemd[1]: anacron.timer: Adding 46.220472s random time.
Jan 26 21:12:50 bureau freshclam[549]: Sun Jan 26 21:12:50 2020 -> Received signal: wake up
Jan 26 21:12:50 bureau freshclam[549]: Sun Jan 26 21:12:50 2020 -> ClamAV update process started at Sun Jan 26 21:12:50 2020
Jan 26 21:12:50 bureau freshclam[549]: Sun Jan 26 21:12:50 2020 -> ^Your ClamAV installation is OUTDATED!
Jan 26 21:12:50 bureau freshclam[549]: Sun Jan 26 21:12:50 2020 -> ^Local version: 0.101.4 Recommended version: 0.102.1
Jan 26 21:12:50 bureau freshclam[549]: Sun Jan 26 21:12:50 2020 -> DON'T PANIC! Read https://www.clamav.net/documents/upgrading-clamav
Jan 26 21:12:50 bureau freshclam[549]: Sun Jan 26 21:12:50 2020 -> main.cld is up to date (version: 59, sigs: 4564902, f-level: 60, builder: sigmgr)
Jan 26 21:12:50 bureau freshclam[549]: Sun Jan 26 21:12:50 2020 -> daily.cld is up to date (version: 25707, sigs: 2162077, f-level: 63, builder: raynman)
Jan 26 21:12:50 bureau freshclam[549]: Sun Jan 26 21:12:50 2020 -> bytecode.cvd is up to date (version: 331, sigs: 94, f-level: 63, builder: anvilleg)
Jan 26 21:13:21 bureau smartd[1661]: Device: /dev/sda [SAT], FAILED SMART self-check. BACK UP DATA NOW!
Jan 26 21:13:21 bureau smartd[1661]: Device: /dev/sda [SAT], Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
Jan 26 21:13:21 bureau smartd[1661]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 181 to 176
Jan 26 21:17:01 bureau CRON[27843]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jan 26 21:43:21 bureau smartd[1661]: Device: /dev/sda [SAT], FAILED SMART self-check. BACK UP DATA NOW!
Jan 26 21:43:21 bureau smartd[1661]: Device: /dev/sda [SAT], Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
Jan 26 21:43:21 bureau smartd[1661]: Device: /dev/sdb [SAT], SMART Usage Attribute: 189 Airflow_Temperature_Cel changed from 23 to 24
Jan 26 21:43:21 bureau smartd[1661]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 24
Jan 26 21:48:31 bureau kernel: [13404.313712] perf: interrupt took too long (3191 > 3143), lowering kernel.perf_event_max_sample_rate to 62500
Jan 26 22:01:36 bureau systemd[1]: Started Run anacron jobs.
Jan 26 22:01:36 bureau anacron[16315]: Anacron 2.3 started on 2020-01-26
Jan 26 22:01:36 bureau anacron[16315]: Normal exit (0 jobs run)
Jan 26 22:01:36 bureau systemd[1]: anacron.timer: Adding 1min 35.738404s random time.
Jan 26 22:12:50 bureau freshclam[549]: Sun Jan 26 22:12:50 2020 -> Received signal: wake up
Jan 26 22:12:50 bureau freshclam[549]: Sun Jan 26 22:12:50 2020 -> ClamAV update process started at Sun Jan 26 22:12:50 2020
Jan 26 22:12:50 bureau freshclam[549]: Sun Jan 26 22:12:50 2020 -> ^Your ClamAV installation is OUTDATED!
Jan 26 22:12:50 bureau freshclam[549]: Sun Jan 26 22:12:50 2020 -> ^Local version: 0.101.4 Recommended version: 0.102.1
Jan 26 22:12:50 bureau freshclam[549]: Sun Jan 26 22:12:50 2020 -> DON'T PANIC! Read https://www.clamav.net/documents/upgrading-clamav
Jan 26 22:12:50 bureau freshclam[549]: Sun Jan 26 22:12:50 2020 -> main.cld is up to date (version: 59, sigs: 4564902, f-level: 60, builder: sigmgr)
Jan 26 22:12:50 bureau freshclam[549]: Sun Jan 26 22:12:50 2020 -> daily.cld is up to date (version: 25707, sigs: 2162077, f-level: 63, builder: raynman)
Jan 26 22:12:50 bureau freshclam[549]: Sun Jan 26 22:12:50 2020 -> bytecode.cvd is up to date (version: 331, sigs: 94, f-level: 63, builder: anvilleg)
Jan 26 22:13:20 bureau smartd[1661]: Device: /dev/sda [SAT], FAILED SMART self-check. BACK UP DATA NOW!
Jan 26 22:13:20 bureau smartd[1661]: Device: /dev/sda [SAT], Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
cat /var/log/syslog | tail -n 100 | grep sda
Hors ligne
Hors ligne
Hors ligne
Hors ligne
Pages : 1