C'est un vieux monsieur, qui a été très mal conseillé par un supermarché. Je ne dis pas l'enseigne.
Une arnaque. Pure et simple.
Windows 10 S, des gens qui ont tripatouillé dessus... et ça plantait. Pas la moindre donnée à sauvegarder : il n'y avait rien dessus.
[ 0.000000] Linux version 5.4.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 5.4.8-1~bpo10+1 (2020-01-07)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-0.bpo.2-amd64 root=UUID=0bbcafc3-d2b2-490c-9d83-7c53d198780f ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x000000006f97efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006f97f000-0x0000000072b7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000072b7f000-0x0000000072bdefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000072bdf000-0x0000000072c1efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000072c1f000-0x0000000079d36fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079d37000-0x000000007a636fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a637000-0x000000007abfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.60 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x72c1e014 TPMFinalLog=0x72a85000 ESRT=0x6fc4a818 SMBIOS=0x6fc37000 SMBIOS 3.0=0x6fc35000 MEMATTR=0x6cf52018 TPMEventLog=0x4ad3d018
[ 0.000000] Kernel is locked down from EFI Secure Boot; see https://wiki.debian.org/SecureBoot
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] SMBIOS 3.0.1 present.
[ 0.000000] DMI: Acer Aspire A114-32/Bulbasaur_GL_S, BIOS V1.15 01/30/2019
[ 0.000000] tsc: Detected 1094.400 MHz processor
[ 0.000031] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000035] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000050] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000056] MTRR default type: uncachable
[ 0.000059] MTRR fixed ranges enabled:
[ 0.000062] 00000-9FFFF write-back
[ 0.000064] A0000-BFFFF uncachable
[ 0.000066] C0000-FFFFF write-protect
[ 0.000068] MTRR variable ranges enabled:
[ 0.000072] 0 base 00FF800000 mask 7FFF800000 write-combining
[ 0.000075] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000077] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.000080] 3 base 007C000000 mask 7FFC000000 uncachable
[ 0.000082] 4 base 0100000000 mask 7F80000000 write-back
[ 0.000084] 5 base 0090000000 mask 7FF0000000 write-combining
[ 0.000086] 6 disabled
[ 0.000087] 7 disabled
[ 0.000088] 8 disabled
[ 0.000090] 9 disabled
[ 0.000197] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000290] last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
[ 0.009208] esrt: Reserving ESRT space from 0x000000006fc4a818 to 0x000000006fc4a850.
[ 0.009228] Using GB pages for direct mapping
[ 0.009233] BRK [0x118601000, 0x118601fff] PGTABLE
[ 0.009238] BRK [0x118602000, 0x118602fff] PGTABLE
[ 0.009241] BRK [0x118603000, 0x118603fff] PGTABLE
[ 0.009347] BRK [0x118604000, 0x118604fff] PGTABLE
[ 0.009636] BRK [0x118605000, 0x118605fff] PGTABLE
[ 0.009737] BRK [0x118606000, 0x118606fff] PGTABLE
[ 0.009834] BRK [0x118607000, 0x118607fff] PGTABLE
[ 0.009941] BRK [0x118608000, 0x118608fff] PGTABLE
[ 0.010089] BRK [0x118609000, 0x118609fff] PGTABLE
[ 0.010197] BRK [0x11860a000, 0x11860afff] PGTABLE
[ 0.010397] RAMDISK: [mem 0x3da15000-0x3fffafff]
[ 0.010410] ACPI: Early table checksum verification disabled
[ 0.010417] ACPI: RSDP 0x0000000072C1E014 000024 (v02 ACRSYS)
[ 0.010424] ACPI: XSDT 0x0000000072BFA188 000114 (v01 ACRSYS ACRPRDCT 00000003 01000013)
[ 0.010436] ACPI: FACP 0x0000000072C14000 000114 (v06 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010447] ACPI: DSDT 0x0000000072C03000 009A09 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010454] ACPI: FACS 0x0000000072BD7000 000040
[ 0.010459] ACPI: FACS 0x0000000072BD7000 000040
[ 0.010465] ACPI: UEFI 0x0000000072C1D000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.010471] ACPI: UEFI 0x0000000072C1C000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.010477] ACPI: SSDT 0x0000000072C1B000 000554 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.010483] ACPI: TPM2 0x0000000072C1A000 000034 (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.010489] ACPI: MSDM 0x0000000072C19000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.010495] ACPI: BDAT 0x0000000072C18000 000030 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.010501] ACPI: HPET 0x0000000072C13000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010507] ACPI: LPIT 0x0000000072C12000 00005C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010513] ACPI: APIC 0x0000000072C11000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010519] ACPI: MCFG 0x0000000072C10000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010524] ACPI: NPKT 0x0000000072C0F000 000065 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010530] ACPI: PRAM 0x0000000072C0E000 000030 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010536] ACPI: WSMT 0x0000000072C0D000 000028 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010542] ACPI: SSDT 0x0000000072C01000 00111A (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010548] ACPI: SSDT 0x0000000072C00000 000271 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010554] ACPI: SSDT 0x0000000072BFF000 00030B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.010560] ACPI: SSDT 0x0000000072BF4000 0055D0 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.010566] ACPI: SSDT 0x0000000072BFE000 000439 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.010572] ACPI: SSDT 0x0000000072BFD000 00072B (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.010578] ACPI: SSDT 0x0000000072BFC000 00032D (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.010584] ACPI: SSDT 0x0000000072BFB000 00017C (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.010590] ACPI: SSDT 0x0000000072BF1000 00283F (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.010596] ACPI: FPDT 0x0000000072BF0000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.010602] ACPI: DBGP 0x0000000072C16000 000034 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010608] ACPI: DBG2 0x0000000072C17000 000072 (v00 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010614] ACPI: DMAR 0x0000000072C15000 0000A8 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.010620] ACPI: WDAT 0x0000000072BEE000 000104 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.010626] ACPI: BGRT 0x0000000072BEF000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.010631] ACPI: NHLT 0x0000000072BED000 00002D (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.010646] ACPI: Local APIC address 0xfee00000
[ 0.010933] No NUMA configuration found
[ 0.010935] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.010946] NODE_DATA(0) allocated [mem 0x17fffb000-0x17fffffff]
[ 0.011013] Zone ranges:
[ 0.011015] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011018] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011021] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.011023] Device empty
[ 0.011025] Movable zone start for each node
[ 0.011027] Early memory node ranges
[ 0.011029] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.011032] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.011033] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.011035] node 0: [mem 0x0000000012151000-0x000000006f97efff]
[ 0.011037] node 0: [mem 0x0000000072c1f000-0x0000000079d36fff]
[ 0.011039] node 0: [mem 0x000000007a637000-0x000000007abfffff]
[ 0.011041] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.011971] Zeroed struct page in unavailable ranges: 45397 pages
[ 0.011974] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.011978] On node 0 totalpages: 1003179
[ 0.011981] DMA zone: 64 pages used for memmap
[ 0.011982] DMA zone: 21 pages reserved
[ 0.011985] DMA zone: 3996 pages, LIFO batch:0
[ 0.012117] DMA32 zone: 7421 pages used for memmap
[ 0.012119] DMA32 zone: 474895 pages, LIFO batch:63
[ 0.035909] Normal zone: 8192 pages used for memmap
[ 0.035912] Normal zone: 524288 pages, LIFO batch:63
[ 0.052090] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.052280] ACPI: PM-Timer IO Port: 0x408
[ 0.052286] ACPI: Local APIC address 0xfee00000
[ 0.052300] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.052303] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.052304] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.052306] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.052343] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.052348] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.052351] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.052355] ACPI: IRQ0 used by override.
[ 0.052357] ACPI: IRQ9 used by override.
[ 0.052361] Using ACPI (MADT) for SMP configuration information
[ 0.052364] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.052385] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.052435] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.052439] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.052443] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.052447] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.052451] PM: Registered nosave memory: [mem 0x6f97f000-0x72b7efff]
[ 0.052452] PM: Registered nosave memory: [mem 0x72b7f000-0x72bdefff]
[ 0.052454] PM: Registered nosave memory: [mem 0x72bdf000-0x72c1efff]
[ 0.052458] PM: Registered nosave memory: [mem 0x79d37000-0x7a636fff]
[ 0.052462] PM: Registered nosave memory: [mem 0x7ac00000-0x7fffffff]
[ 0.052463] PM: Registered nosave memory: [mem 0x80000000-0xd3708fff]
[ 0.052465] PM: Registered nosave memory: [mem 0xd3709000-0xd3709fff]
[ 0.052466] PM: Registered nosave memory: [mem 0xd370a000-0xdfffffff]
[ 0.052468] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.052469] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
[ 0.052471] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.052472] PM: Registered nosave memory: [mem 0xfed02000-0xff7fffff]
[ 0.052474] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.052478] [mem 0x80000000-0xd3708fff] available for PCI devices
[ 0.052481] Booting paravirtualized kernel on bare hardware
[ 0.052487] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.288890] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.289563] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u524288
[ 0.289580] pcpu-alloc: s178584 r8192 d30312 u524288 alloc=1*2097152
[ 0.289583] pcpu-alloc: [0] 0 1 2 3
[ 0.289648] Built 1 zonelists, mobility grouping on. Total pages: 987481
[ 0.289650] Policy zone: Normal
[ 0.289654] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-0.bpo.2-amd64 root=UUID=0bbcafc3-d2b2-490c-9d83-7c53d198780f ro quiet
[ 0.290723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.291221] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.291309] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.307346] Calgary: detecting Calgary via BIOS EBDA area
[ 0.307348] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.334078] Memory: 3755752K/4012716K available (10243K kernel code, 1187K rwdata, 3748K rodata, 1660K init, 2076K bss, 256964K reserved, 0K cma-reserved)
[ 0.334496] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.334531] Kernel/User page tables isolation: enabled
[ 0.334562] ftrace: allocating 33565 entries in 132 pages
[ 0.362108] Lockdown: swapper: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 0.362111] Tracing disabled due to lockdown
[ 0.362236] rcu: Hierarchical RCU implementation.
[ 0.362240] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.362242] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.362244] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.367580] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[ 0.368150] random: crng done (trusting CPU's manufacturer)
[ 0.368208] Console: colour dummy device 80x25
[ 0.368217] printk: console [tty0] enabled
[ 0.368262] ACPI: Core revision 20190816
[ 0.368794] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.368891] APIC: Switch to symmetric I/O mode setup
[ 0.368895] DMAR: Host address width 39
[ 0.368897] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[ 0.368909] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
[ 0.368912] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[ 0.368927] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.368931] DMAR: RMRR base: 0x00000072b52000 end: 0x00000072b71fff
[ 0.368933] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.368937] DMAR-IR: IOAPIC id 1 under DRHD base 0xfed65000 IOMMU 1
[ 0.368939] DMAR-IR: HPET id 0 under DRHD base 0xfed65000
[ 0.368941] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.371081] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.371083] x2apic enabled
[ 0.371106] Switched APIC routing to cluster x2apic.
[ 0.375807] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.392851] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.392864] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
[ 0.392869] pid_max: default: 32768 minimum: 301
[ 0.400977] LSM: Security Framework initializing
[ 0.400996] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.401054] AppArmor: AppArmor initialized
[ 0.401059] TOMOYO Linux initialized
[ 0.401130] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.401149] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.401732] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.401783] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.401851] process: using mwait in idle threads
[ 0.401856] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.401858] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.401866] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.401871] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.401873] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.401878] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.401880] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.402368] Freeing SMP alternatives memory: 24K
[ 0.405956] TSC deadline timer enabled
[ 0.405968] smpboot: CPU0: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz (family: 0x6, model: 0x7a, stepping: 0x1)
[ 0.406322] Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.406334] ... version: 4
[ 0.406336] ... bit width: 48
[ 0.406337] ... generic registers: 4
[ 0.406338] ... value mask: 0000ffffffffffff
[ 0.406340] ... max period: 00007fffffffffff
[ 0.406341] ... fixed-purpose events: 3
[ 0.406342] ... event mask: 000000070000000f
[ 0.406430] rcu: Hierarchical SRCU implementation.
[ 0.407533] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.407676] smp: Bringing up secondary CPUs ...
[ 0.407906] x86: Booting SMP configuration:
[ 0.407908] .... node #0, CPUs: #1
[ 0.408858] smp: Brought up 1 node, 2 CPUs
[ 0.408858] smpboot: Max logical packages: 2
[ 0.408858] smpboot: Total of 2 processors activated (4377.60 BogoMIPS)
[ 0.409311] devtmpfs: initialized
[ 0.409311] x86/mm: Memory block size: 128MB
[ 0.410122] PM: Registering ACPI NVS region [mem 0x72b7f000-0x72bdefff] (393216 bytes)
[ 0.410122] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.410122] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.410122] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 0.410122] Can not register tracer function_graph due to lockdown
[ 0.410122] pinctrl core: initialized pinctrl subsystem
[ 0.410122] NET: Registered protocol family 16
[ 0.410122] audit: initializing netlink subsys (disabled)
[ 0.410122] audit: type=2000 audit(1580900137.040:1): state=initialized audit_enabled=0 res=1
[ 0.410122] cpuidle: using governor ladder
[ 0.410122] cpuidle: using governor menu
[ 0.410122] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.410122] ACPI: bus type PCI registered
[ 0.410122] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.410122] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.410122] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.410122] PCI: Using configuration type 1 for base access
[ 0.414900] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.414900] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.885534] ACPI: Added _OSI(Module Device)
[ 0.885534] ACPI: Added _OSI(Processor Device)
[ 0.885534] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.885534] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.885534] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.885534] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.885534] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.908781] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.934734] ACPI: Dynamic OEM Table Load:
[ 0.934754] ACPI: SSDT 0xFFFF8E2F7AA64600 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.936587] ACPI: Dynamic OEM Table Load:
[ 0.936603] ACPI: SSDT 0xFFFF8E2F7AA64C00 00015F (v02 PmRef ApIst 00003000 INTL 20130117)
[ 0.938083] ACPI: Dynamic OEM Table Load:
[ 0.938099] ACPI: SSDT 0xFFFF8E2F7A967780 00008D (v02 PmRef ApCst 00003000 INTL 20130117)
[ 0.940071] ACPI: EC: EC started
[ 0.940073] ACPI: EC: interrupt blocked
[ 0.940897] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.940902] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.940905] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.940906] ACPI: Interpreter enabled
[ 0.940972] ACPI: (supports S0 S3 S4 S5)
[ 0.940975] ACPI: Using IOAPIC for interrupt routing
[ 0.941044] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.941835] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.942328] ACPI: Power Resource [DRST] (on)
[ 0.947161] ACPI: Power Resource [WRST] (on)
[ 0.956038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.956050] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.957743] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.957746] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.957784] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.959221] PCI host bridge to bus 0000:00
[ 0.959226] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.959230] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.959233] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.959236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.959239] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.959242] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.959244] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.959247] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.959250] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[ 0.959253] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.959255] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
[ 0.959258] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[ 0.959261] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[ 0.959264] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[ 0.959266] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[ 0.959269] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[ 0.959272] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[ 0.959274] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[ 0.959277] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[ 0.959280] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.959304] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[ 0.959948] pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
[ 0.959994] pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit]
[ 0.960680] pci 0000:00:00.3: [8086:3190] type 00 class 0x088000
[ 0.960710] pci 0000:00:00.3: reg 0x10: [mem 0xa1416000-0xa1416fff 64bit]
[ 0.961324] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[ 0.961345] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.961356] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.961365] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.961395] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.962050] pci 0000:00:0e.0: [8086:3198] type 00 class 0x040380
[ 0.962080] pci 0000:00:0e.0: reg 0x10: [mem 0xa1410000-0xa1413fff 64bit]
[ 0.962116] pci 0000:00:0e.0: reg 0x20: [mem 0xa1200000-0xa12fffff 64bit]
[ 0.962216] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.962869] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[ 0.962923] pci 0000:00:0f.0: reg 0x10: [mem 0xa1417000-0xa1417fff 64bit]
[ 0.963070] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.963640] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[ 0.963669] pci 0000:00:12.0: reg 0x10: [mem 0xa1414000-0xa1415fff]
[ 0.963680] pci 0000:00:12.0: reg 0x14: [mem 0xa141e000-0xa141e0ff]
[ 0.963694] pci 0000:00:12.0: reg 0x18: [io 0x2080-0x2087]
[ 0.963707] pci 0000:00:12.0: reg 0x1c: [io 0x2088-0x208b]
[ 0.963719] pci 0000:00:12.0: reg 0x20: [io 0x2060-0x207f]
[ 0.963732] pci 0000:00:12.0: reg 0x24: [mem 0xa141c000-0xa141c7ff]
[ 0.963795] pci 0000:00:12.0: PME# supported from D3hot
[ 0.964365] pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
[ 0.964489] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.965115] pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
[ 0.965235] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[ 0.965830] pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
[ 0.965950] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[ 0.966565] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[ 0.966614] pci 0000:00:15.0: reg 0x10: [mem 0xa1400000-0xa140ffff 64bit]
[ 0.966703] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.967292] pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000
[ 0.967328] pci 0000:00:17.0: reg 0x10: [mem 0xa1418000-0xa1418fff 64bit]
[ 0.967345] pci 0000:00:17.0: reg 0x18: [mem 0xa1419000-0xa1419fff 64bit]
[ 0.968021] pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501
[ 0.968076] pci 0000:00:1c.0: reg 0x10: [mem 0xa141a000-0xa141afff 64bit]
[ 0.968102] pci 0000:00:1c.0: reg 0x18: [mem 0xa141b000-0xa141bfff 64bit]
[ 0.968824] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[ 0.969562] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[ 0.969636] pci 0000:00:1f.1: reg 0x10: [mem 0xa141d000-0xa141d0ff 64bit]
[ 0.969720] pci 0000:00:1f.1: reg 0x20: [io 0x2040-0x205f]
[ 0.970432] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.970548] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
[ 0.970585] pci 0000:02:00.0: reg 0x10: [mem 0xa1305000-0xa1305fff]
[ 0.970662] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.970676] pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[ 0.970684] pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.970797] pci 0000:02:00.0: supports D1 D2
[ 0.970800] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.971007] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
[ 0.971044] pci 0000:02:00.1: reg 0x10: [io 0x1000-0x10ff]
[ 0.971079] pci 0000:02:00.1: reg 0x18: [mem 0xa1304000-0xa1304fff 64bit]
[ 0.971100] pci 0000:02:00.1: reg 0x20: [mem 0xa1300000-0xa1303fff 64bit]
[ 0.971230] pci 0000:02:00.1: supports D1 D2
[ 0.971233] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.971448] pci 0000:00:13.2: PCI bridge to [bus 02]
[ 0.971453] pci 0000:00:13.2: bridge window [io 0x1000-0x1fff]
[ 0.971459] pci 0000:00:13.2: bridge window [mem 0xa1300000-0xa13fffff]
[ 0.971886] pci 0000:03:00.0: [168c:0042] type 00 class 0x028000
[ 0.972354] pci 0000:03:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit]
[ 0.973887] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.975255] pci 0000:00:13.3: PCI bridge to [bus 03]
[ 0.975263] pci 0000:00:13.3: bridge window [mem 0xa1000000-0xa11fffff]
[ 0.976458] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.976599] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.976737] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.976884] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15)
[ 0.977019] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.977153] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9
[ 0.977285] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.977418] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.985510] ACPI: EC: interrupt unblocked
[ 0.985540] ACPI: EC: event unblocked
[ 0.985609] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.985613] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.985724] iommu: Default domain type: Translated
[ 0.985762] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.985762] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.985762] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.985762] vgaarb: loaded
[ 0.985762] EDAC MC: Ver: 3.0.0
[ 0.985762] Registered efivars operations
[ 0.985762] PCI: Using ACPI for IRQ routing
[ 0.993987] PCI: pci_cache_line_size set to 64 bytes
[ 0.994322] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.994325] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.994327] e820: reserve RAM buffer [mem 0x6f97f000-0x6fffffff]
[ 0.994328] e820: reserve RAM buffer [mem 0x79d37000-0x7bffffff]
[ 0.994330] e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
[ 0.994624] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.994633] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.996702] clocksource: Switched to clocksource tsc-early
[ 0.996706] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 0.996707] Tracing disabled due to lockdown
[ 0.996709] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 0.996710] Tracing disabled due to lockdown
[ 0.996712] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 0.996713] Tracing disabled due to lockdown
[ 0.996716] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 0.996717] Tracing disabled due to lockdown
[ 0.996719] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 0.996720] Tracing disabled due to lockdown
[ 0.996721] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 0.996722] Tracing disabled due to lockdown
[ 0.996829] VFS: Disk quotas dquot_6.6.0
[ 0.996829] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.996829] AppArmor: AppArmor Filesystem Enabled
[ 0.996829] pnp: PnP ACPI init
[ 0.996829] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:13.2 BAR 13 [io 0x1000-0x1fff]
[ 0.996829] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.996829] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.996829] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.996829] system 00:00: [io 0x0600-0x061f] has been reserved
[ 0.996829] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.996829] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.996829] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.996829] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.996829] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.996829] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.996829] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.996829] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.996829] system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.996829] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.996829] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.996829] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.996829] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.996829] pnp: PnP ACPI: found 4 devices
[ 0.998762] thermal_sys: Registered thermal governor 'fair_share'
[ 0.998764] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.998765] thermal_sys: Registered thermal governor 'step_wise'
[ 0.998767] thermal_sys: Registered thermal governor 'user_space'
[ 1.003259] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.003490] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.003509] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 1.003530] pci 0000:02:00.0: BAR 6: assigned [mem 0xa1310000-0xa131ffff pref]
[ 1.003534] pci 0000:00:13.2: PCI bridge to [bus 02]
[ 1.003538] pci 0000:00:13.2: bridge window [io 0x1000-0x1fff]
[ 1.003546] pci 0000:00:13.2: bridge window [mem 0xa1300000-0xa13fffff]
[ 1.003557] pci 0000:00:13.3: PCI bridge to [bus 03]
[ 1.003563] pci 0000:00:13.3: bridge window [mem 0xa1000000-0xa11fffff]
[ 1.003574] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.003578] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.003581] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.003583] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.003586] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.003589] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.003592] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 1.003595] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[ 1.003598] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[ 1.003601] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[ 1.003603] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[ 1.003606] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[ 1.003609] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[ 1.003611] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[ 1.003614] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[ 1.003617] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[ 1.003620] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[ 1.003622] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[ 1.003625] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[ 1.003628] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.003631] pci_bus 0000:02: resource 1 [mem 0xa1300000-0xa13fffff]
[ 1.003634] pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa11fffff]
[ 1.003846] NET: Registered protocol family 2
[ 1.004128] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 1.004147] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.004249] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 1.004421] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.004482] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.004506] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.004619] NET: Registered protocol family 1
[ 1.004630] NET: Registered protocol family 44
[ 1.004659] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.006688] PCI: CLS 64 bytes, default 64
[ 1.006773] Trying to unpack rootfs image as initramfs...
[ 2.530971] Freeing initrd memory: 38808K
[ 2.531095] DMAR: No ATSR found
[ 2.531180] DMAR: dmar0: Using Queued invalidation
[ 2.531187] DMAR: dmar1: Using Queued invalidation
[ 2.531669] pci 0000:00:00.0: Adding to iommu group 0
[ 2.531694] pci 0000:00:00.1: Adding to iommu group 0
[ 2.531716] pci 0000:00:00.3: Adding to iommu group 0
[ 2.542607] pci 0000:00:02.0: Adding to iommu group 1
[ 2.542707] pci 0000:00:02.0: Using iommu direct mapping
[ 2.542785] pci 0000:00:0e.0: Adding to iommu group 2
[ 2.542912] pci 0000:00:0f.0: Adding to iommu group 3
[ 2.543011] pci 0000:00:12.0: Adding to iommu group 4
[ 2.543138] pci 0000:00:13.0: Adding to iommu group 5
[ 2.543249] pci 0000:00:13.2: Adding to iommu group 6
[ 2.543376] pci 0000:00:13.3: Adding to iommu group 7
[ 2.543521] pci 0000:00:15.0: Adding to iommu group 8
[ 2.543648] pci 0000:00:17.0: Adding to iommu group 9
[ 2.543760] pci 0000:00:1c.0: Adding to iommu group 10
[ 2.546307] pci 0000:00:1f.0: Adding to iommu group 11
[ 2.546334] pci 0000:00:1f.1: Adding to iommu group 11
[ 2.546474] pci 0000:02:00.0: Adding to iommu group 12
[ 2.546515] pci 0000:02:00.1: Adding to iommu group 12
[ 2.546620] pci 0000:03:00.0: Adding to iommu group 13
[ 2.546693] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 2.550999] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 2.551024] clocksource: Switched to clocksource tsc
[ 2.551645] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 2.551647] Tracing disabled due to lockdown
[ 2.551649] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 2.551651] Can not register tracer mmiotrace due to lockdown
[ 2.551654] Lockdown: swapper/0: use of tracefs is restricted; see https://wiki.debian.org/SecureBoot
[ 2.551655] Can not register tracer blk due to lockdown
[ 2.551656] Warning: could not register the block tracer
[ 2.551915] Initialise system trusted keyrings
[ 2.551946] Key type blacklist registered
[ 2.552049] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 2.555275] zbud: loaded
[ 2.555726] Platform Keyring initialized
[ 2.555731] Key type asymmetric registered
[ 2.555733] Asymmetric key parser 'x509' registered
[ 2.555748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.555847] io scheduler mq-deadline registered
[ 2.556509] pcieport 0000:00:13.0: PME: Signaling with IRQ 122
[ 2.556950] pcieport 0000:00:13.2: PME: Signaling with IRQ 123
[ 2.557329] pcieport 0000:00:13.3: PME: Signaling with IRQ 124
[ 2.557458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.557488] efifb: probing for efifb
[ 2.557513] efifb: framebuffer at 0x90000000, using 4128k, total 4128k
[ 2.557515] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 2.557516] efifb: scrolling: redraw
[ 2.557520] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.557712] Console: switching to colour frame buffer device 170x48
[ 2.563515] fb0: EFI VGA frame buffer device
[ 2.563535] intel_idle: MWAIT substates: 0x11242020
[ 2.563537] intel_idle: v0.4.1 model 0x7A
[ 2.563808] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.566567] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.566570] ACPI: Thermal Zone [TZ01] (36 C)
[ 2.566827] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.568065] Linux agpgart interface v0.103
[ 2.568179] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.568181] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 2.568480] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.568482] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.570304] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.570563] mousedev: PS/2 mouse device common for all mice
[ 2.570661] rtc_cmos 00:03: RTC can wake from S4
[ 2.571354] rtc_cmos 00:03: registered as rtc0
[ 2.571391] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.571412] intel_pstate: Intel P-state driver initializing
[ 2.571708] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.572071] drop_monitor: Initializing network drop monitor service
[ 2.572561] NET: Registered protocol family 10
[ 2.578188] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.598083] Segment Routing with IPv6
[ 2.598113] mip6: Mobile IPv6
[ 2.598116] NET: Registered protocol family 17
[ 2.598218] mpls_gso: MPLS GSO support
[ 2.598491] microcode: sig=0x706a1, pf=0x1, revision=0x2a
[ 2.598532] microcode: Microcode Update Driver: v2.2.
[ 2.598538] IPI shorthand broadcast: enabled
[ 2.598549] sched_clock: Marking stable (2597523006, 901935)->(2603816319, -5391378)
[ 2.598687] registered taskstats version 1
[ 2.598688] Loading compiled-in X.509 certificates
[ 2.648370] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.648391] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 2.648416] zswap: loaded using pool lzo/zbud
[ 2.648564] Key type ._fscrypt registered
[ 2.648565] Key type .fscrypt registered
[ 2.648591] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.651582] integrity: Loading X.509 certificate: UEFI:db
[ 2.651658] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 2.651659] integrity: Loading X.509 certificate: UEFI:db
[ 2.651687] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 2.651688] integrity: Loading X.509 certificate: UEFI:db
[ 2.651705] integrity: Loaded X.509 cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5'
[ 2.651705] integrity: Loading X.509 certificate: UEFI:db
[ 2.651868] alg: No test for pkcs1pad(rsa,sha1) (pkcs1pad(rsa-generic,sha1))
[ 2.654599] integrity: Loaded X.509 cert 'LINPUS: 967f81f2f4f5ac0f24fca5e42982e4ad1e56ddff'
[ 2.654600] integrity: Loading X.509 certificate: UEFI:db
[ 2.654887] integrity: Loaded X.509 cert 'Quanta NB4: 073d6a4c306ea5b9499e861c7ba55cde'
[ 2.660561] rtc_cmos 00:03: setting system clock to 2020-02-05T10:55:39 UTC (1580900139)
[ 2.660617] Lockdown: swapper/0: hibernation is restricted; see https://wiki.debian.org/SecureBoot
[ 2.661740] Freeing unused kernel image memory: 1660K
[ 2.681116] Write protecting the kernel read-only data: 16384k
[ 2.682429] Freeing unused kernel image memory: 2036K
[ 2.682804] Freeing unused kernel image memory: 348K
[ 2.699298] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.699334] x86/mm: Checking user space page tables
[ 2.710015] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.710017] Run /init as init process
[ 2.835126] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.835159] ACPI: Power Button [PWRB]
[ 2.835218] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 2.835242] ACPI: Sleep Button [SLPB]
[ 2.835292] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 2.835313] ACPI: Lid Switch [LID0]
[ 2.835362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.835402] ACPI: Power Button [PWRF]
[ 2.855955] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 2.860010] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.885383] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.891279] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 2.891334] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[ 2.901354] ACPI: bus type USB registered
[ 2.901604] usbcore: registered new interface driver usbfs
[ 2.901616] usbcore: registered new interface driver hub
[ 2.901645] usbcore: registered new device driver usb
[ 2.915665] sdhci: Secure Digital Host Controller Interface driver
[ 2.915666] sdhci: Copyright(c) Pierre Ossman
[ 2.918204] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 2.922120] SCSI subsystem initialized
[ 2.937833] libphy: r8169: probed
[ 2.938032] r8169 0000:02:00.1 eth0: RTL8411b, b4:a9:fc:2b:35:f5, XID 5c8, IRQ 126
[ 2.938034] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.952978] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 3)
[ 2.953359] mmc0: CQHCI version 5.10
[ 2.967026] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.967034] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 2.968232] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 2.968238] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 2.968311] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[ 2.968495] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 2.968497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.968498] usb usb1: Product: xHCI Host Controller
[ 2.968500] usb usb1: Manufacturer: Linux 5.4.0-0.bpo.2-amd64 xhci-hcd
[ 2.968501] usb usb1: SerialNumber: 0000:00:15.0
[ 2.968724] hub 1-0:1.0: USB hub found
[ 2.968823] hub 1-0:1.0: 9 ports detected
[ 2.970733] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.970737] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 2.970740] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 2.970795] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 2.970796] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.970798] usb usb2: Product: xHCI Host Controller
[ 2.970799] usb usb2: Manufacturer: Linux 5.4.0-0.bpo.2-amd64 xhci-hcd
[ 2.970800] usb usb2: SerialNumber: 0000:00:15.0
[ 2.970906] hub 2-0:1.0: USB hub found
[ 2.970922] hub 2-0:1.0: 7 ports detected
[ 2.971770] usb: port power management may be unreliable
[ 2.984429] r8169 0000:02:00.1 enp2s0f1: renamed from eth0
[ 2.990547] libata version 3.00 loaded.
[ 2.994862] ahci 0000:00:12.0: version 3.0
[ 2.995152] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.995154] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
[ 2.999734] scsi host0: ahci
[ 3.000185] scsi host1: ahci
[ 3.000254] ata1: SATA max UDMA/133 abar m2048@0xa141c000 port 0xa141c100 irq 128
[ 3.000258] ata2: SATA max UDMA/133 abar m2048@0xa141c000 port 0xa141c180 irq 128
[ 3.007447] i2c_hid i2c-ELAN0503:00: i2c-ELAN0503:00 supply vdd not found, using dummy regulator
[ 3.007470] i2c_hid i2c-ELAN0503:00: i2c-ELAN0503:00 supply vddl not found, using dummy regulator
[ 3.024531] i915 0000:00:02.0: VT-d active for gfx access
[ 3.024534] checking generic (90000000 408000) vs hw (90000000 10000000)
[ 3.024535] fb0: switching to inteldrmfb from EFI VGA
[ 3.024625] Console: switching to colour dummy device 80x25
[ 3.024659] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 3.024761] [drm] couldn't get memory information
[ 3.024763] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.024763] [drm] Driver supports precise vblank timestamp query.
[ 3.024838] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.025321] i915 0000:00:02.0: firmware: direct-loading firmware i915/glk_dmc_ver1_04.bin
[ 3.025553] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 3.147665] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 3.148659] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.149083] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.151804] fbcon: i915drmfb (fb0) is primary device
[ 3.165303] Console: switching to colour frame buffer device 170x48
[ 3.187890] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 3.200579] mmc0: Command Queue Engine enabled
[ 3.200599] mmc0: new HS400 MMC card at address 0001
[ 3.209188] mmcblk0: mmc0:0001 DA4064 58.2 GiB
[ 3.209268] mmcblk0boot0: mmc0:0001 DA4064 partition 1 4.00 MiB
[ 3.209335] mmcblk0boot1: mmc0:0001 DA4064 partition 2 4.00 MiB
[ 3.209455] mmcblk0rpmb: mmc0:0001 DA4064 partition 3 16.0 MiB, chardev (247:0)
[ 3.212257] mmcblk0: p1 p2 p3
[ 3.305035] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 3.316426] ata2: SATA link down (SStatus 4 SControl 300)
[ 3.316465] ata1: SATA link down (SStatus 4 SControl 300)
[ 3.327498] input: ELAN0503:00 04F3:3093 Mouse as /devices/pci0000:00/0000:00:17.0/i2c_designware.0/i2c-1/i2c-ELAN0503:00/0018:04F3:3093.0001/input/input6
[ 3.327572] input: ELAN0503:00 04F3:3093 Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_designware.0/i2c-1/i2c-ELAN0503:00/0018:04F3:3093.0001/input/input8
[ 3.327636] hid-generic 0018:04F3:3093.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0503:00 04F3:3093] on i2c-ELAN0503:00
[ 3.458721] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[ 3.458729] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.458733] usb 1-3: Product: USB2.0 Hub
[ 3.460563] hub 1-3:1.0: USB hub found
[ 3.460824] hub 1-3:1.0: 4 ports detected
[ 3.541117] mmc0: Requiring re-tune after rpm resume
[ 3.561850] Lockdown: resume: hibernation is restricted; see https://wiki.debian.org/SecureBoot
[ 3.588931] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 3.685950] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.741974] usb 1-5: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[ 3.741978] usb 1-5: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[ 3.741986] usb 1-5: New USB device found, idVendor=04ca, idProduct=3015, bcdDevice= 0.01
[ 3.741989] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.790985] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 3.820919] usb 1-3.3: new low-speed USB device number 4 using xhci_hcd
[ 3.915863] systemd[1]: Inserted module 'autofs4'
[ 3.935970] usb 1-3.3: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30
[ 3.935972] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.935974] usb 1-3.3: Product: HP Basic USB Keyboard
[ 3.935975] usb 1-3.3: Manufacturer: CHICONY
[ 4.049314] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[ 4.215433] usb 1-7: New USB device found, idVendor=04f2, idProduct=b5e0, bcdDevice=14.10
[ 4.215439] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.215444] usb 1-7: Product: VGA WebCam
[ 4.215447] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 4.215450] usb 1-7: SerialNumber: 0x0001
[ 4.263326] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.277030] usb 1-3.4: new low-speed USB device number 6 using xhci_hcd
[ 4.281259] systemd[1]: Detected architecture x86-64.
[ 4.303628] systemd[1]: Set hostname to <ACER-DEB-PASCAL>.
[ 4.304390] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 4.304584] Lockdown: systemd: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot
[ 4.380749] usb 1-3.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 4.380752] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.380754] usb 1-3.4: Product: USB Optical Mouse
[ 4.380756] usb 1-3.4: Manufacturer: Logitech
[ 4.506190] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[ 4.539503] systemd[1]: Listening on Journal Audit Socket.
[ 4.539738] systemd[1]: Listening on Syslog Socket.
[ 4.539960] systemd[1]: Listening on Journal Socket.
[ 4.539999] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 4.542367] systemd[1]: Mounting Huge Pages File System...
[ 4.596806] lp: driver loaded but no devices found
[ 4.624620] RPC: Registered named UNIX socket transport module.
[ 4.624621] RPC: Registered udp transport module.
[ 4.624622] RPC: Registered tcp transport module.
[ 4.624623] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.626860] ppdev: user-space parallel port driver
[ 4.652970] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 4.695668] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.968176] systemd-journald[247]: Received request to flush runtime journal from PID 1
[ 5.083899] ACPI: AC Adapter [ACAD] (on-line)
[ 5.117587] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/10251229:00/input/input9
[ 5.201281] proc_thermal 0000:00:00.1: Creating sysfs group for PROC_THERMAL_PCI
[ 5.266598] mc: Linux media interface: v0.10
[ 5.266912] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 5.266945] acer_wmi: Function bitmap for Communication Button: 0x801
[ 5.328294] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 5.333469] EFI Variables Facility v0.08 2004-May-17
[ 5.368621] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 5.368623] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.368623] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.368624] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.368625] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.390835] videodev: Linux video capture interface: v2.00
[ 5.402765] input: ELAN0503:00 04F3:3093 Mouse as /devices/pci0000:00/0000:00:17.0/i2c_designware.0/i2c-1/i2c-ELAN0503:00/0018:04F3:3093.0001/input/input11
[ 5.406110] input: ELAN0503:00 04F3:3093 Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_designware.0/i2c-1/i2c-ELAN0503:00/0018:04F3:3093.0001/input/input13
[ 5.406688] input: Acer WMI hotkeys as /devices/virtual/input/input14
[ 5.409419] hid-multitouch 0018:04F3:3093.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0503:00 04F3:3093] on i2c-ELAN0503:00
[ 5.424776] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.450611] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:03F0:0024.0002/input/input15
[ 5.450649] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 5.450741] cryptd: max_cpu_qlen set to 1000
[ 5.515109] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:15.0-3.3/input0
[ 5.517884] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:046D:C077.0003/input/input16
[ 5.520078] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:15.0-3.4/input0
[ 5.520134] usbcore: registered new interface driver usbhid
[ 5.520135] usbhid: USB HID core driver
[ 5.528405] SSE version of gcm_enc/dec engaged.
[ 5.536958] uvcvideo: Found UVC 1.00 device VGA WebCam (04f2:b5e0)
[ 5.553737] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.553741] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.553742] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.553837] input: VGA WebCam: VGA WebCam as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/input/input17
[ 5.553935] usbcore: registered new interface driver uvcvideo
[ 5.553936] USB Video Class driver (1.1.1)
[ 5.646418] intel_rapl_common: Found RAPL domain package
[ 5.646422] intel_rapl_common: Found RAPL domain core
[ 5.646423] intel_rapl_common: Found RAPL domain uncore
[ 5.646425] intel_rapl_common: Found RAPL domain dram
[ 5.697426] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 5.697429] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.697430] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 5.697431] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.697432] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.697434] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 5.697435] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.036147] pstore: Using crash dump compression: deflate
[ 6.036168] pstore: Registered efi as persistent store backend
[ 6.124925] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
[ 6.125231] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
[ 6.128032] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input20
[ 6.128311] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input21
[ 6.128488] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input22
[ 6.128664] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input23
[ 6.128838] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input24
[ 6.137716] Adding 4012028k swap on /dev/mmcblk0p3. Priority:-2 extents:1 across:4012028k SSFS
[ 6.167110] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 6.170876] Bluetooth: Core ver 2.22
[ 6.170892] NET: Registered protocol family 31
[ 6.170893] Bluetooth: HCI device and connection manager initialized
[ 6.170898] Bluetooth: HCI socket layer initialized
[ 6.170901] Bluetooth: L2CAP socket layer initialized
[ 6.170906] Bluetooth: SCO socket layer initialized
[ 6.218700] usbcore: registered new interface driver btusb
[ 6.451752] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:03:00.0.bin (-2)
[ 6.451800] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 6.451860] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/cal-pci-0000:03:00.0.bin (-2)
[ 6.464313] ath10k_pci 0000:03:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/firmware-6.bin
[ 6.464325] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6
[ 6.464327] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 6.465197] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[ 6.513628] audit: type=1400 audit(1580900143.351:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=606 comm="apparmor_parser"
[ 6.513632] audit: type=1400 audit(1580900143.351:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=606 comm="apparmor_parser"
[ 6.513634] audit: type=1400 audit(1580900143.351:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=606 comm="apparmor_parser"
[ 6.520057] audit: type=1400 audit(1580900143.355:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=607 comm="apparmor_parser"
[ 6.536715] audit: type=1400 audit(1580900143.371:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=609 comm="apparmor_parser"
[ 6.536719] audit: type=1400 audit(1580900143.371:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=609 comm="apparmor_parser"
[ 6.542919] ath10k_pci 0000:03:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/board-2.bin
[ 6.543170] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 6.555900] audit: type=1400 audit(1580900143.391:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=608 comm="apparmor_parser"
[ 6.555904] audit: type=1400 audit(1580900143.391:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=608 comm="apparmor_parser"
[ 6.568259] audit: type=1400 audit(1580900143.403:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=611 comm="apparmor_parser"
[ 6.585677] audit: type=1400 audit(1580900143.423:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=613 comm="apparmor_parser"
[ 6.621453] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[ 6.640089] ath10k_pci 0000:03:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 6.744709] ath: EEPROM regdomain: 0x69
[ 6.744710] ath: EEPROM indicates we should expect a direct regpair map
[ 6.744712] ath: Country alpha2 being used: 00
[ 6.744712] ath: Regpair used: 0x69
[ 6.764550] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 6.846180] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.846182] Bluetooth: BNEP filters: protocol multicast
[ 6.846188] Bluetooth: BNEP socket layer initialized
[ 7.127152] r8169 0000:02:00.1: firmware: direct-loading firmware rtl_nic/rtl8411-2.fw
[ 7.127258] Generic FE-GE Realtek PHY r8169-201:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-201:00, irq=IGNORE)
[ 7.253026] r8169 0000:02:00.1 enp2s0f1: Link is Down
[ 7.504841] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[ 7.881629] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[ 8.132700] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 8.133060] NFSD: Using legacy client tracking operations.
[ 8.133063] NFSD: starting 90-second grace period (net f00000a8)
[ 8.337446] Lockdown: Xorg: raw io port access is restricted; see https://wiki.debian.org/SecureBoot
[ 8.451755] broken atomic modeset userspace detected, disabling atomic
[ 9.645396] r8169 0000:02:00.1 enp2s0f1: Link is Up - 100Mbps/Full - flow control rx/tx
[ 9.645410] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f1: link becomes ready
[ 57.596415] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 443.036552] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:989a:d8a6:9294:ef61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=722586 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 443.036641] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:989a:d8a6:9294:ef61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=690939 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 443.036674] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=705567 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 443.036705] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=860443 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 443.036736] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=869533 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 443.036766] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=292682 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 443.046629] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:989a:d8a6:9294:ef61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=722586 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 443.046663] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:989a:d8a6:9294:ef61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=690939 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 443.046691] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=705567 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 443.046718] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=860443 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1100.765058] mmc1: card never left busy state
[ 1100.765072] mmc1: error -110 whilst initialising SD card
[ 1101.768055] mmc1: cannot verify signal voltage switch
[ 1101.892996] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 1101.894408] mmcblk1: mmc1:aaaa SL16G 14.8 GiB (ro)
[ 1101.912839] mmcblk1: p1
[ 1105.979122] mmc1: card aaaa removed
[ 1185.979983] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:989a:d8a6:9294:ef61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=722586 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1185.980072] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:989a:d8a6:9294:ef61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=690939 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1185.980105] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=705567 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1185.980136] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=860443 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1185.980166] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=869533 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1185.980198] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=fe80:0000:0000:0000:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=292682 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1185.990180] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:989a:d8a6:9294:ef61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=722586 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1185.990221] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:989a:d8a6:9294:ef61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=690939 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1185.990250] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=705567 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 1185.990277] [UFW BLOCK] IN=enp2s0f1 OUT= MAC=33:33:00:00:00:01:04:d4:c4:02:92:69:86:dd SRC=2a01:0e35:2ef3:4080:06d4:c4ff:fe02:9269 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=860443 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 1193.586725] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1193.607849] usb 2-1: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 1193.607857] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1193.607861] usb 2-1: Product: USB3.0 External HDD
[ 1193.607864] usb 2-1: Manufacturer: ASMedia
[ 1193.607868] usb 2-1: SerialNumber: 20170100000E
[ 1193.783886] usbcore: registered new interface driver usb-storage
[ 1193.791040] scsi host2: uas
[ 1193.791171] usbcore: registered new interface driver uas
[ 1193.793133] scsi 2:0:0:0: Direct-Access HGST HTS 721010A9E630 0 PQ: 0 ANSI: 6
[ 1193.824737] scsi 2:0:0:0: Attached scsi generic sg0 type 0
[ 1193.832399] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1193.832402] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1193.832535] sd 2:0:0:0: [sda] Write Protect is off
[ 1193.832536] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 1193.832696] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1193.833127] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1193.868173] sda: sda1
[ 1193.869345] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1204.184574] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1242.196780] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1242.454580] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1242.546823] usb 2-1: USB disconnect, device number 2
[ 1261.550538] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 1261.571612] usb 2-1: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 1261.571620] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1261.571624] usb 2-1: Product: USB3.0 External HDD
[ 1261.571628] usb 2-1: Manufacturer: ASMedia
[ 1261.571631] usb 2-1: SerialNumber: 20170100000E
[ 1261.582239] scsi host2: uas
[ 1261.585179] scsi 2:0:0:0: Direct-Access HGST HTS 721010A9E630 0 PQ: 0 ANSI: 6
[ 1261.585810] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1261.587516] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1261.587518] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1261.587633] sd 2:0:0:0: [sda] Write Protect is off
[ 1261.587634] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 1261.588513] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1261.588819] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1261.622153] sda: sda1
[ 1261.623601] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1299.569988] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1332.179311] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1332.422216] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1332.518613] usb 2-1: USB disconnect, device number 3
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
