logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 17-10-2020 05:59:55

anonyme
Invité

Re : HDMI amdgpu

Bonjour
j' utilise ceci en https  (ou en http ) .


#debian bullseye 11 https
deb https://deb.debian.org/debian-security bullseye-security/updates main contrib non-free
deb https://deb.debian.org/debian/ bullseye-updates main contrib non-free
deb https://deb.debian.org/debian/ bullseye main contrib non-free
 



tu a des doublons sur le tien , des références a buster , a buster-backports , du bullseye et du testing
donc oui pas terrible pour une installation neuve

le tien nettoyé ça donne ceci


deb http://deb.debian.org/debian bullseye main contrib non-free
deb http://deb.debian.org/debian-security/ bullseye-security/updates main contrib non-free
deb http://deb.debian.org/debian bullseye-updates main contrib non-free
#deb http://www.deb-multimedia.org bullseye main non-free
 



j'ai désactivé le multimedia
un apt update


apt update
 


et un apt autoclean


apt autoclean
 



pour tes tests avec wayland c'est pas cool , je pensais que cela fonctionnerait mieux .

ça aussi pas cool


Switcheroo ne fonctionne qu'avec gnome.
Sous KDE il faut passer avec DRI_PRIME=1 ou 0.
 



et pour le HDMI c'est une maladie , tu parle d'utiliser l'écran du portable ou un écran externe en hdmi ?

je manque d'expérience sur ce genre de matériel , je n'utilise que des PC fixes avec debian.
moins de galère avec des PC de bureau

#27 17-10-2020 17:16:16

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.10.0-19-amd64
(G)UI : gnome wayland
Inscription : 01-09-2007

Re : HDMI amdgpu

Un écran externe en hdmi.

Pour switcheroo il y a quand même la possibilité dans les options de cochr le gpu.

P.s.
kernel 5.8.0.3 disponible dans l'apt search linux-image-amd64
je test ... sait-on jamais ...

Merci pour le sources.list, je l'ai modifié.
     __________________________________

J'ai testé de lancer un jeu en forçant le GPU dédié (carte graphique rx5500m) avec les options sous kde et ... Pouf patatra à chaque fois.
Le framebuffer plante, et freeze total de la machine.

J'en conclu que les pilotes libre ne sont pas encore au point. C'est toujours le GPU renoir (processeur) qui fonctionne.

Je ne met pas résolu, car ça ne l'est vraiment pas. Mais au moins maintenant je sais pourquoi .
Attendons un peu que les mises à jour viennent.
Le pc tourne, fait ce que je lui demande c'est déjà ça.
Mais jouer avec un 2ième écran ou regarder un film sur la tv via l'hdmi du pc ce n'est pas pour tout de suite ...

Merci robert pour ta participation à la recherche et la compréhension smile

Sources :
https://gitlab.freedesktop.org/drm/amd/-/issues/1177

Dernière modification par ludopika (17-10-2020 21:59:04)

Hors ligne

#28 18-10-2020 04:53:29

anonyme
Invité

Re : HDMI amdgpu

Bonjour
essaie d'ouvrir la mémoire au maximum dans le bios , pour moi 3000MB sur le Raven 2200G
les jeux ont besoin de mémoire et tente d'utiliser "renoir" plutôt que la 5500M


glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: X.Org (0x1002)
    Device: AMD RAVEN (DRM 3.38.0, 5.8.0-2-amd64, LLVM 10.0.1) (0x15dd)
    Version: 20.1.9
    Accelerated: yes
    Video memory: 3072MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.6
    Max compat profile version: 4.6
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
    VBO free memory - total: 2928 MB, largest block: 2928 MB
    VBO free aux. memory - total: 3045 MB, largest block: 3045 MB
    Texture free memory - total: 2928 MB, largest block: 2928 MB
    Texture free aux. memory - total: 3045 MB, largest block: 3045 MB
    Renderbuffer free memory - total: 2928 MB, largest block: 2928 MB
    Renderbuffer free aux. memory - total: 3045 MB, largest block: 3045 MB
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 3072 MB
    Total available memory: 6144 MB
    Currently available dedicated video memory: 2928 MB
 



pour le noyau en version 5.8 rien de neuf , il faudrait le 5.9 pour les améliorations et bullseye je sais pas quel noyau final va être retenu

je sais pas si tu la déjà précisé , pendant le démarrage du portable , l'affichage se promène entre le portable et le HDMI ou uniquement le portable ?
il y a bien le xorg.conf pour personnalisé l'affichage ou le bureau dans les préférences mais faut que la machine soit stable .

voir si le bios te propose des options pour les GPU
ps: au début (stretch) , j'ai eu des soucis avec le raven , avec un seul gpu .
le multi-écran et le multi-gpu pas stable et difficile a mettre en oeuvre sur raven
par contre je peu jouer en OpenGL ou Vulkan (avec un jeux compatible) sur le 2200G
pense a activer le "i386" pour Steam par exemple pour les jeux
faut être patient , et peut être passer a la prochaine "testing" pour améliorer (pas pour tout de suite )
ps: je sais pas si avoir l'affichage sur les deux écrans possible sur le portable , et gérer le mode "clone" ou "étendu" (au niveau matériel)
ton lien au dessus montre que n'est pas le seul  hmm

Dernière modification par anonyme (19-10-2020 15:48:59)

#29 21-10-2020 08:38:22

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.10.0-19-amd64
(G)UI : gnome wayland
Inscription : 01-09-2007

Re : HDMI amdgpu

Bonjour,

Comme tu dis robert, le noyau 5.8 reste inchangé.
Par contre le 5.9 contient une vrai amélioration au niveau hardware.

Pendant le démarrage, oui, j'ai l'affichage en clone sur les 2 écrans.

Je vais regarder comment installer le noyau 5.9 (sid) en gardant mon système bullseye.
          ____________________________


P.S:
(Comme l'autre jour, cette partie me servira de memo)

Suivre les tutos :
https://debian-facile.org/doc:systeme:a … st:testing (ajout dépôt unstable)
https://debian-facile.org/doc:systeme:apt:pinning (création d'un fichier pinning)

On crée un fichier /etc/apt/preferences.d/kernel-sid :

nano /etc/apt/preferences.d


puis on y rajoute le code suivant :

Package: *
Pin: release n=sid
Pin-priority:100
 
Package: linux-image-5.9.0-1-amd64-unsigned
Pin: release n=sid
Pin-Priority: 900



Après vérifications :

apt-get update


et

apt-cache policy


il y a un souci :

root@debian:~# apt-cache policy
Fichiers du paquet :
 100 /var/lib/dpkg/status
     release a=now
 500 http://deb.debian.org/debian unstable/non-free i386 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=non-free,b=i386
     origin deb.debian.org
 500 http://deb.debian.org/debian unstable/non-free amd64 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=non-free,b=amd64
     origin deb.debian.org
 500 http://deb.debian.org/debian unstable/contrib i386 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=contrib,b=i386
     origin deb.debian.org
 500 http://deb.debian.org/debian unstable/contrib amd64 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=contrib,b=amd64
     origin deb.debian.org
 500 http://deb.debian.org/debian unstable/main i386 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=i386
     origin deb.debian.org
 500 http://deb.debian.org/debian unstable/main amd64 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64
     origin deb.debian.org
 500 https://dl.winehq.org/wine-builds/debian buster/main i386 Packages
     release o=dl.winehq.org,a=stable,n=buster,l=winehq,c=main,b=i386
     origin dl.winehq.org
 500 https://dl.winehq.org/wine-builds/debian buster/main amd64 Packages
     release o=dl.winehq.org,a=stable,n=buster,l=winehq,c=main,b=amd64
     origin dl.winehq.org
 500 http://files.eid.belgium.be/debian buster/main i386 Packages
     release o=BOSA,a=stable,n=buster,l=BOSA,c=main,b=i386
     origin files.eid.belgium.be
 500 http://files.eid.belgium.be/debian buster/main amd64 Packages
     release o=BOSA,a=stable,n=buster,l=BOSA,c=main,b=amd64
     origin files.eid.belgium.be
 500 http://www.deb-multimedia.org bullseye/non-free i386 Packages
     release o=Unofficial Multimedia Packages,a=testing,n=bullseye,l=Unofficial Multimedia Packages,c=non-free,b=i386
     origin www.deb-multimedia.org
 500 http://www.deb-multimedia.org bullseye/non-free amd64 Packages
     release o=Unofficial Multimedia Packages,a=testing,n=bullseye,l=Unofficial Multimedia Packages,c=non-free,b=amd64
     origin www.deb-multimedia.org
 500 http://www.deb-multimedia.org bullseye/main i386 Packages
     release o=Unofficial Multimedia Packages,a=testing,n=bullseye,l=Unofficial Multimedia Packages,c=main,b=i386
     origin www.deb-multimedia.org
 500 http://www.deb-multimedia.org bullseye/main amd64 Packages
     release o=Unofficial Multimedia Packages,a=testing,n=bullseye,l=Unofficial Multimedia Packages,c=main,b=amd64
     origin www.deb-multimedia.org
 500 http://deb.debian.org/debian bullseye/non-free i386 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=non-free,b=i386
     origin deb.debian.org
 500 http://deb.debian.org/debian bullseye/non-free amd64 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=non-free,b=amd64
     origin deb.debian.org
 500 http://deb.debian.org/debian bullseye/contrib i386 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=contrib,b=i386
     origin deb.debian.org
 500 http://deb.debian.org/debian bullseye/contrib amd64 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=contrib,b=amd64
     origin deb.debian.org
 500 http://deb.debian.org/debian bullseye/main i386 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=main,b=i386
     origin deb.debian.org
 500 http://deb.debian.org/debian bullseye/main amd64 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=main,b=amd64
     origin deb.debian.org
Paquets épinglés :
     linux-image-5.9.0-1-amd64-unsigned -> 5.9.1-1 avec la priorité 900



L'apt-cache policy à bien pris en compte le paquet linux-image.
Par contre ça met des priorités 500 à la branche unstable en me donne une histoire comme 280Mo de mises à jour scratchhead.gif ... alors que j'ai :

Package: *
Pin: release n=sid
Pin-priority:100
 
Package: linux-image-5.9.0-1-amd64-unsigned
Pin: release n=sid
Pin-Priority: 900


La branche sid devrait avoir une priorité 100 non ?
Avant de tout casser, je préfère avoir une confirmation ... à suivre ...

Dernière modification par ludopika (21-10-2020 11:41:34)

Hors ligne

#30 21-10-2020 13:27:13

anonyme
Invité

Re : HDMI amdgpu

Bonjour
plus simple


apt-get -s --reinstall install linux-image-amd64
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'
état... Fait
Les paquets supplémentaires suivants seront installés :
  linux-image-5.9.0-1-amd64 wireless-regdb
Paquets suggérés :
  linux-doc-5.9 debian-kernel-handbook
Les NOUVEAUX paquets suivants seront installés :
  linux-image-5.9.0-1-amd64
Les paquets suivants seront mis à jour :
  linux-image-amd64 wireless-regdb
2 mis à jour, 1 nouvellement installés, 0 à enlever et 1416 non mis à jour.
Inst wireless-regdb [2016.06.10-1] (2020.04.29-2 Debian:unstable [all])
Inst linux-image-5.9.0-1-amd64 (5.9.1-1 Debian:unstable [amd64])
Inst linux-image-amd64 [4.19+105+deb10u7] (5.9.1-1 Debian:unstable [amd64])
Conf wireless-regdb (2020.04.29-2 Debian:unstable [all])
Conf linux-image-5.9.0-1-amd64 (5.9.1-1 Debian:unstable [amd64])
Conf linux-image-amd64 (5.9.1-1 Debian:unstable [amd64])
 



puis tu commente la ligne sid avec "#"
ça fonctionne si tu n'a pas besoin des headers (et aucune dépendance est modifié )
j'ai simulé a partir de buster avec la ligne sid activé

pour revenir en arrière tu désinstalle "linux-image-amd64 pour le remettre a la version de bullseye
pour le noyau tu peu le retirer sans soucis a partir d un noyau plus ancien

sinon encore plus restrictif


apt-get -s --reinstall install linux-image-5.9.0-1-amd64
 



Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
  wireless-regdb
Paquets suggérés :
  linux-doc-5.9 debian-kernel-handbook
Les NOUVEAUX paquets suivants seront installés :
  linux-image-5.9.0-1-amd64
Les paquets suivants seront mis à jour :
  wireless-regdb
1 mis à jour, 1 nouvellement installés, 0 à enlever et 1417 non mis à jour.
Inst wireless-regdb [2016.06.10-1] (2020.04.29-2 Debian:unstable [all])
Inst linux-image-5.9.0-1-amd64 (5.9.1-1 Debian:unstable [amd64])
Conf wireless-regdb (2020.04.29-2 Debian:unstable [all])
Conf linux-image-5.9.0-1-amd64 (5.9.1-1 Debian:unstable [amd64])
 



pour "wireless-regdb" j'ai "network manager" et j'ai du utiliser une clé wifi sur cette machine
avec la simulation tu risque rien , mais tu aura le retour de ce qu'il va faire
pense a bien commenter ensuite la ligne sid (a moins que tu pense passer a sid  tongue  )

Dernière modification par anonyme (21-10-2020 13:39:11)

#31 21-10-2020 15:46:45

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.10.0-19-amd64
(G)UI : gnome wayland
Inscription : 01-09-2007

Re : HDMI amdgpu

Mais si je commente la ligne sid, il n'y aura plus de mise à jour de ce paquet.

Je pense avoir trouvé.
Voici mon fichier pinning  dans /etc/apt/preferences.d :

Package: *
Pin: release a=testing
Pin-Priority:900

Package: *
Pin: release a=testing-updates
Pin-Priority:900

Package: *
Pin: release n=sid
Pin-priority:-1

Package: linux-image-5.9.0-1-amd64-unsigned
Pin: release n=sid
Pin-Priority:900
 




Qui me renvois un update-cache policy aux poils comme je les aime big_smile :

root@debian:~# apt-cache policy
Fichiers du paquet :
 100 /var/lib/dpkg/status
     release a=now
  -1 http://deb.debian.org/debian sid/non-free i386 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=non-free,b=i386
     origin deb.debian.org
  -1 http://deb.debian.org/debian sid/non-free amd64 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=non-free,b=amd64
     origin deb.debian.org
  -1 http://deb.debian.org/debian sid/contrib i386 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=contrib,b=i386
     origin deb.debian.org
  -1 http://deb.debian.org/debian sid/contrib amd64 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=contrib,b=amd64
     origin deb.debian.org
  -1 http://deb.debian.org/debian sid/main i386 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=i386
     origin deb.debian.org
  -1 http://deb.debian.org/debian sid/main amd64 Packages
     release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64
     origin deb.debian.org
 500 https://dl.winehq.org/wine-builds/debian buster/main i386 Packages
     release o=dl.winehq.org,a=stable,n=buster,l=winehq,c=main,b=i386
     origin dl.winehq.org
 500 https://dl.winehq.org/wine-builds/debian buster/main amd64 Packages
     release o=dl.winehq.org,a=stable,n=buster,l=winehq,c=main,b=amd64
     origin dl.winehq.org
 500 http://files.eid.belgium.be/debian buster/main i386 Packages
     release o=BOSA,a=stable,n=buster,l=BOSA,c=main,b=i386
     origin files.eid.belgium.be
 500 http://files.eid.belgium.be/debian buster/main amd64 Packages
     release o=BOSA,a=stable,n=buster,l=BOSA,c=main,b=amd64
     origin files.eid.belgium.be
 900 http://www.deb-multimedia.org testing/non-free i386 Packages
     release o=Unofficial Multimedia Packages,a=testing,n=bullseye,l=Unofficial Multimedia Packages,c=non-free,b=i386
     origin www.deb-multimedia.org
 900 http://www.deb-multimedia.org testing/non-free amd64 Packages
     release o=Unofficial Multimedia Packages,a=testing,n=bullseye,l=Unofficial Multimedia Packages,c=non-free,b=amd64
     origin www.deb-multimedia.org
 900 http://www.deb-multimedia.org testing/main i386 Packages
     release o=Unofficial Multimedia Packages,a=testing,n=bullseye,l=Unofficial Multimedia Packages,c=main,b=i386
     origin www.deb-multimedia.org
 900 http://www.deb-multimedia.org testing/main amd64 Packages
     release o=Unofficial Multimedia Packages,a=testing,n=bullseye,l=Unofficial Multimedia Packages,c=main,b=amd64
     origin www.deb-multimedia.org
 900 http://deb.debian.org/debian testing/non-free i386 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=non-free,b=i386
     origin deb.debian.org
 900 http://deb.debian.org/debian testing/non-free amd64 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=non-free,b=amd64
     origin deb.debian.org
 900 http://deb.debian.org/debian testing/contrib i386 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=contrib,b=i386
     origin deb.debian.org
 900 http://deb.debian.org/debian testing/contrib amd64 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=contrib,b=amd64
     origin deb.debian.org
 900 http://deb.debian.org/debian testing/main i386 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=main,b=i386
     origin deb.debian.org
 900 http://deb.debian.org/debian testing/main amd64 Packages
     release o=Debian,a=testing,n=bullseye,l=Debian,c=main,b=amd64
     origin deb.debian.org
Paquets épinglés :
     linux-image-5.9.0-1-amd64-unsigned -> 5.9.1-1 avec la priorité 900



En résumé, il me dit :
- avec -1 tu n'installera rien de la branche sid
- avec 500 tu installera du stable si pas trouvé mieux ailleurs
- avec 900 tu installe en priorité le testing sinon tu te rabat sur le stable
- avec le paquet épinglé tu l'installe quoiqu'il arrive même si cette branche est en sid

Il n'y a plus qu'à tester ! huhu!!

Petit retour :
=> il installe bien le paquet linux-image mais il ne trouve pas les dépendances (dommage j'y ai cru a fond lol)
=> je teste ta solution du coup robert, et commenter ensuite la ligne sid du sources.list
   => bien joué l'artiste, ça fonctionne. Du coup je dois dé-commenter de temps en temps juste pour --reinstall le paquet linux-image-amd64 ce qui le mettra à jour.
Avec ta solution je perd l'effet automatique de la gestion des paquets, mais je gagne en visibilité => j'installe manuellement ce que je veux !
Je comprend maintenant pourquoi il est périlleux de jouer avec sid ! il ne faut pas oublier de modifier le sources-listold_geek.gif

Par contre, toujours pas d'hdmi ...
Pas grave, au moins j'approfondi les connaissances de la gestion du système en mettant les mains dans le camboui merci.gif

Dernière modification par ludopika (21-10-2020 17:26:09)

Hors ligne

#32 22-10-2020 09:18:06

anonyme
Invité

Re : HDMI amdgpu

tu te moque de la mise a jour sur sid du noyau
premier cas le noyau descend sur "testing" et tu n'a plus besoin de "sid"
deuxième cas un noyau de version supérieure sur sid et tu l'installe

oui si sid ne t' intéresse pas c'est plus simple.
juste surveiller les dépendances avec la simulation "-s" pour ne pas mettre en péril "Bullseye (testing)
enlever le noyau pas compliqué , du moment que tu démarre sur un autre noyau

quand au HDMI c'est du chinois pour moi sur les portables , je sais que ce souci revient souvent sur le forum
en fait les sorties vidéo sont partagé entre deux gpu (en théorie) mais je sais pas comment c'est géré

tu regardé du coté du xorg.conf et ton log de X
je connais pas du tout KDE  hmm

#33 01-11-2020 09:30:34

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.10.0-19-amd64
(G)UI : gnome wayland
Inscription : 01-09-2007

Re : HDMI amdgpu

Bonjour robert

Je m'excuse du temps de réponse, j'ai des soucis coté travail (licenciement ...). Je passe les détails.

Donc le xorg.conf !
Pas de fichier xorg.conf dans /etc/x11
je vais chercher comment en créer un ... à suivre

   -----------------------

J'utilise le wiki
Rien ne se créé ...

Dernière modification par ludopika (01-11-2020 10:00:46)

Hors ligne

#34 01-11-2020 09:56:43

anonyme
Invité

Re : HDMI amdgpu

Bonjour
moi je jette l'éponge si quelqu'un a une solution . hmm
par contre si tu poste le log de X je peu regarder si tout va bien
normalement selon le bureau il est dans /var/log   ou dans ton /home/tonuser/.local   (fichiers cachés )

#35 01-11-2020 10:01:36

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.10.0-19-amd64
(G)UI : gnome wayland
Inscription : 01-09-2007

Re : HDMI amdgpu

[     4.851] (--) Log file renamed from "/var/log/Xorg.pid-751.log" to "/var/log/Xorg.0.log"
[     4.853]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     4.853] Build Operating System: Linux 4.19.0-8-amd64 x86_64 Debian
[     4.853] Current Operating System: Linux debian 5.9.0-1-amd64 #1 SMP Debian 5.9.1-1 (2020-10-17) x86_64
[     4.853] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64 root=UUID=18de27d7-dff4-4a5e-8d81-c24ffc28af61 ro quiet
[     4.853] Build Date: 31 March 2020  10:14:40AM
[     4.853] xorg-server 2:1.20.8-2 (https://www.debian.org/support)
[     4.853] Current version of pixman: 0.36.0
[     4.853]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     4.853] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.853] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov  1 09:50:44 2020
[     4.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.856] (==) No Layout section.  Using the first Screen section.
[     4.856] (==) No screen section available. Using defaults.
[     4.856] (**) |-->Screen "Default Screen Section" (0)
[     4.856] (**) |   |-->Monitor "<default monitor>"
[     4.857] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     4.857] (==) Automatically adding devices
[     4.857] (==) Automatically enabling devices
[     4.857] (==) Automatically adding GPU devices
[     4.857] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     4.859] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     4.859]  Entry deleted from font path.
[     4.861] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     4.861] (==) ModulePath set to "/usr/lib/xorg/modules"
[     4.861] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.861] (II) Loader magic: 0x558f06581e20
[     4.861] (II) Module ABI versions:
[     4.861]  X.Org ANSI C Emulation: 0.4
[     4.861]  X.Org Video Driver: 24.1
[     4.861]  X.Org XInput driver : 24.1
[     4.861]  X.Org Server Extension : 10.0
[     4.862] (++) using VT number 7

[     4.862] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     4.863] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.865] (II) xfree86: Adding drm device (/dev/dri/card1)
[     4.877] (--) PCI: (3@0:0:0) 1002:7340:1462:12ac rev 193, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfe500000/524288, BIOS @ 0x????????/131072
[     4.877] (--) PCI:*(7@0:0:0) 1002:1636:1462:12ac rev 199, Mem @ 0xb0000000/268435456, 0xc0000000/2097152, 0xfe400000/524288, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[     4.877] (II) LoadModule: "glx"
[     4.878] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.884] (II) Module glx: vendor="X.Org Foundation"
[     4.884]  compiled for 1.20.8, module version = 1.0.0
[     4.884]  ABI class: X.Org Server Extension, version 10.0
[     4.884] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[     4.884]  loading driver: amdgpu
[     4.884] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[     4.884]  loading driver: amdgpu
[     4.884] (==) Matched amdgpu as autoconfigured driver 0
[     4.884] (==) Matched ati as autoconfigured driver 1
[     4.884] (==) Matched modesetting as autoconfigured driver 2
[     4.884] (==) Matched fbdev as autoconfigured driver 3
[     4.884] (==) Matched vesa as autoconfigured driver 4
[     4.884] (==) Assigned the driver to the xf86ConfigLayout
[     4.884] (II) LoadModule: "amdgpu"
[     4.887] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[     4.890] (II) Module amdgpu: vendor="X.Org Foundation"
[     4.890]  compiled for 1.20.4, module version = 19.1.0
[     4.890]  Module class: X.Org Video Driver
[     4.890]  ABI class: X.Org Video Driver, version 24.0
[     4.890] (II) LoadModule: "ati"
[     4.890] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[     4.890] (II) Module ati: vendor="X.Org Foundation"
[     4.890]  compiled for 1.20.4, module version = 19.1.0
[     4.890]  Module class: X.Org Video Driver
[     4.890]  ABI class: X.Org Video Driver, version 24.0
[     4.959] (II) LoadModule: "radeon"
[     4.959] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[     4.961] (II) Module radeon: vendor="X.Org Foundation"
[     4.961]  compiled for 1.20.4, module version = 19.1.0
[     4.961]  Module class: X.Org Video Driver
[     4.961]  ABI class: X.Org Video Driver, version 24.0
[     4.961] (II) LoadModule: "modesetting"
[     4.961] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.962] (II) Module modesetting: vendor="X.Org Foundation"
[     4.962]  compiled for 1.20.8, module version = 1.20.8
[     4.962]  Module class: X.Org Video Driver
[     4.962]  ABI class: X.Org Video Driver, version 24.1
[     4.962] (II) LoadModule: "fbdev"
[     4.962] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.963] (II) Module fbdev: vendor="X.Org Foundation"
[     4.963]  compiled for 1.20.0, module version = 0.5.0
[     4.963]  Module class: X.Org Video Driver
[     4.963]  ABI class: X.Org Video Driver, version 24.0
[     4.963] (II) LoadModule: "vesa"
[     4.963] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.963] (II) Module vesa: vendor="X.Org Foundation"
[     4.963]  compiled for 1.20.9, module version = 2.5.0
[     4.963]  Module class: X.Org Video Driver
[     4.963]  ABI class: X.Org Video Driver, version 24.1
[     4.963] (II) AMDGPU: Driver for AMD Radeon:
  All GPUs supported by the amdgpu kernel driver
[     4.963] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
  ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
  ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
  ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
  ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
  ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
  ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
  ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
  ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
  ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
  ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
  ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
  ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
  ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
  ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
  ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
  ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
  ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
  ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
  ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
  ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
  ATI Radeon 9800PRO, ATI Radeon 9800XT,
  ATI Radeon Mobility 9600/9700 (M10/M11),
  ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
  ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
  ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
  ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
  ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
  ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
  ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
  ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
  ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
  ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
  ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
  ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
  ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
  ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
  ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
  ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
  ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
  ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
  ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
  ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
  ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
  ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
  ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
  ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
  ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
  ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
  ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
  ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
  ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
  ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
  ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
  ATI FireGL V3350, ATI Mobility Radeon X1450,
  ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
  ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
  ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
  ATI FireGL V3400, ATI Mobility FireGL V5250,
  ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
  ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
  ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
  ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
  ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
  ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
  ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
  ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
  ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
  ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
  ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
  ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
  AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
  ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
  ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
  ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
  ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
  ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
  ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
  ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
  ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
  ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
  ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
  ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
  ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
  ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
  ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
  ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
  ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
  ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
  ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
  ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
  ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
  ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
  ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
  ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
  ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
  ATI FireGL V3600, ATI Radeon HD 2600 LE,
  ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
  ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
  ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
  ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
  ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
  ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
  ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
  ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
  ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
  ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
  ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
  AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
  AMD Radeon HD 6300 Series Graphics,
  AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
  ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
  AMD Firestream 9350, ATI Radeon HD 5800 Series,
  ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
  ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
  ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
  ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
  REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
  ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
  AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
  AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
  ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
  MULLINS, KAVERI, HAWAII
[     4.966] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.966] (II) FBDEV: driver for framebuffer: fbdev
[     4.966] (II) VESA: driver for VESA chipsets: vesa
[     4.973] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[     4.977] (WW) Falling back to old probe method for modesetting
[     4.977] (WW) Falling back to old probe method for fbdev
[     4.977] (II) Loading sub module "fbdevhw"
[     4.977] (II) LoadModule: "fbdevhw"
[     4.977] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.978] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.978]  compiled for 1.20.8, module version = 0.0.2
[     4.978]  ABI class: X.Org Video Driver, version 24.1
[     4.978] (II) AMDGPU(G0): [KMS] Kernel modesetting enabled.
[     4.979] (II) AMDGPU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     4.979] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[     4.979] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     4.979] (==) AMDGPU(0): Default visual is TrueColor
[     4.979] (==) AMDGPU(0): RGB weight 888
[     4.979] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[     4.979] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x1636)
[     4.979] (II) Loading sub module "fb"
[     4.979] (II) LoadModule: "fb"
[     4.979] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.980] (II) Module fb: vendor="X.Org Foundation"
[     4.980]  compiled for 1.20.8, module version = 1.0.0
[     4.980]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.980] (II) Loading sub module "dri2"
[     4.980] (II) LoadModule: "dri2"
[     4.980] (II) Module "dri2" already built-in
[     5.104] (II) Loading sub module "glamoregl"
[     5.104] (II) LoadModule: "glamoregl"
[     5.105] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.112] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.112]  compiled for 1.20.8, module version = 1.0.1
[     5.112]  ABI class: X.Org ANSI C Emulation, version 0.4
[     5.137] (II) AMDGPU(0): glamor X acceleration enabled on AMD RENOIR (DRM 3.39.0, 5.9.0-1-amd64, LLVM 10.0.1)
[     5.137] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[     5.137] (==) AMDGPU(0): TearFree property default: auto
[     5.137] (==) AMDGPU(0): VariableRefresh: disabled
[     5.137] (II) AMDGPU(0): KMS Pageflipping: enabled
[     5.137] (II) AMDGPU(0): Output eDP has no monitor section
[     5.143] (II) AMDGPU(0): EDID for output eDP
[     5.143] (II) AMDGPU(0): Manufacturer: AUO  Model: 978f  Serial#: 0
[     5.143] (II) AMDGPU(0): Year: 2020  Week: 3
[     5.143] (II) AMDGPU(0): EDID Version: 1.4
[     5.143] (II) AMDGPU(0): Digital Display Input
[     5.143] (II) AMDGPU(0): 8 bits per channel
[     5.143] (II) AMDGPU(0): Digital interface is DisplayPort
[     5.143] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 38  vert.: 22
[     5.143] (II) AMDGPU(0): Gamma: 2.20
[     5.143] (II) AMDGPU(0): No DPMS capabilities specified
[     5.143] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[     5.143] (II) AMDGPU(0): First detailed timing is preferred mode
[     5.143] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[     5.143] (II) AMDGPU(0): Display is continuous-frequency
[     5.143] (II) AMDGPU(0): redX: 0.575 redY: 0.347   greenX: 0.352 greenY: 0.578
[     5.143] (II) AMDGPU(0): blueX: 0.161 blueY: 0.128   whiteX: 0.313 whiteY: 0.329
[     5.143] (II) AMDGPU(0): Manufacturer's mask: 0
[     5.144] (II) AMDGPU(0): Supported detailed timing:
[     5.144] (II) AMDGPU(0): clock: 368.1 MHz   Image Size:  382 x 215 mm
[     5.144] (II) AMDGPU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2102 h_border: 0
[     5.144] (II) AMDGPU(0): v_active: 1080  v_sync: 1090  v_sync_end 1095 v_blanking: 1216 v_border: 0
[     5.144] (II) AMDGPU(0): Supported detailed timing:
[     5.144] (II) AMDGPU(0): clock: 153.4 MHz   Image Size:  382 x 215 mm
[     5.144] (II) AMDGPU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2102 h_border: 0
[     5.144] (II) AMDGPU(0): v_active: 1080  v_sync: 1090  v_sync_end 1095 v_blanking: 1216 v_border: 0
[     5.144] (II) AMDGPU(0): Ranges: V min: 60 V max: 144 Hz, H min: 176 H max: 176 kHz, PixClock max 375 MHz
[     5.144] (II) AMDGPU(0):  B173HAN04.9
[     5.144] (II) AMDGPU(0): EDID (in hex):
[     5.144] (II) AMDGPU(0):  00ffffffffffff0006af8f9700000000
[     5.144] (II) AMDGPU(0):  031e0104a526167803707593585a9429
[     5.144] (II) AMDGPU(0):  20505400000001010101010101010101
[     5.144] (II) AMDGPU(0):  010101010101ce8f80b6703888403020
[     5.144] (II) AMDGPU(0):  a5007ed710000018ec3b80b670388840
[     5.144] (II) AMDGPU(0):  3020a5007ed710000018000000fd003c
[     5.144] (II) AMDGPU(0):  90b0b025010a202020202020000000fe
[     5.144] (II) AMDGPU(0):  004231373348414e30342e39200a007a
[     5.144] (II) AMDGPU(0): Printing probed modes for output eDP
[     5.144] (II) AMDGPU(0): Modeline "1920x1080"x144.0  368.14  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (175.1 kHz eP)
[     5.144] (II) AMDGPU(0): Modeline "1920x1080"x60.0  153.40  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (73.0 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1680x1050"x144.0  368.14  1680 1968 2000 2102  1050 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1280x1024"x144.0  368.14  1280 1968 2000 2102  1024 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1440x900"x144.0  368.14  1440 1968 2000 2102  900 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1280x800"x144.0  368.14  1280 1968 2000 2102  800 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1280x720"x144.0  368.14  1280 1968 2000 2102  720 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1024x768"x144.0  368.14  1024 1968 2000 2102  768 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "800x600"x144.0  368.14  800 1968 2000 2102  600 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "640x480"x144.0  368.14  640 1968 2000 2102  480 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Output eDP connected
[     5.144] (II) AMDGPU(0): Using exact sizes for initial modes
[     5.144] (II) AMDGPU(0): Output eDP using initial mode 1920x1080 +0+0
[     5.144] (II) AMDGPU(0): mem size init: gart size :bf6b3000 vram size: s:1e325000 visible:1e325000
[     5.144] (==) AMDGPU(0): DPI set to (96, 96)
[     5.144] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.144] (II) Loading sub module "ramdac"
[     5.144] (II) LoadModule: "ramdac"
[     5.144] (II) Module "ramdac" already built-in
[     5.144] (==) AMDGPU(G0): Depth 24, (--) framebuffer bpp 32
[     5.144] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     5.144] (==) AMDGPU(G0): Default visual is TrueColor
[     5.144] (==) AMDGPU(G0): RGB weight 888
[     5.144] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC)
[     5.144] (--) AMDGPU(G0): Chipset: "Radeon RX 5500M" (ChipID = 0x7340)
[     5.144] (II) Loading sub module "fb"
[     5.144] (II) LoadModule: "fb"
[     5.144] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.144] (II) Module fb: vendor="X.Org Foundation"
[     5.144]  compiled for 1.20.8, module version = 1.0.0
[     5.144]  ABI class: X.Org ANSI C Emulation, version 0.4
[     5.144] (II) Loading sub module "dri2"
[     5.144] (II) LoadModule: "dri2"
[     5.144] (II) Module "dri2" already built-in
[     5.154] (II) Loading sub module "glamoregl"
[     5.154] (II) LoadModule: "glamoregl"
[     5.154] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.154] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.154]  compiled for 1.20.8, module version = 1.0.1
[     5.154]  ABI class: X.Org ANSI C Emulation, version 0.4
[     5.159] (II) AMDGPU(G0): glamor X acceleration enabled on Radeon RX 5500M (NAVI14, DRM 3.39.0, 5.9.0-1-amd64, LLVM 10.0.1)
[     5.159] (II) AMDGPU(G0): glamor detected, initialising EGL layer.
[     5.159] (==) AMDGPU(G0): TearFree property default: auto
[     5.159] (II) AMDGPU(G0): Output HDMI-A-1-0 has no monitor section
[     5.159] (II) AMDGPU(G0): EDID for output HDMI-A-1-0
[     5.159] (II) AMDGPU(G0): mem size init: gart size :fe5be000 vram size: s:fe0e4000 visible:fe34000
[     5.159] (==) AMDGPU(G0): DPI set to (96, 96)
[     5.159] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0)
[     5.159] (II) Loading sub module "ramdac"
[     5.159] (II) LoadModule: "ramdac"
[     5.159] (II) Module "ramdac" already built-in
[     5.159] (II) UnloadModule: "radeon"
[     5.159] (II) Unloading radeon
[     5.159] (II) UnloadModule: "modesetting"
[     5.159] (II) Unloading modesetting
[     5.159] (II) UnloadModule: "fbdev"
[     5.159] (II) Unloading fbdev
[     5.159] (II) UnloadSubModule: "fbdevhw"
[     5.159] (II) Unloading fbdevhw
[     5.159] (II) UnloadModule: "vesa"
[     5.159] (II) Unloading vesa
[     5.160] (II) AMDGPU(0): [DRI2] Setup complete
[     5.160] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     5.160] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[     5.220] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[     5.221] (II) AMDGPU(0): SYNC extension fences enabled
[     5.221] (II) AMDGPU(0): Present extension enabled
[     5.221] (==) AMDGPU(0): DRI3 enabled
[     5.221] (==) AMDGPU(0): Backing store enabled
[     5.221] (II) AMDGPU(0): Direct rendering enabled
[     5.236] (II) AMDGPU(0): Use GLAMOR acceleration.
[     5.236] (II) AMDGPU(0): Acceleration enabled
[     5.236] (==) AMDGPU(0): DPMS enabled
[     5.236] (==) AMDGPU(0): Silken mouse enabled
[     5.236] (II) AMDGPU(0): Set up textured video (glamor)
[     5.241] (II) AMDGPU(G0): [DRI2] Setup complete
[     5.241] (II) AMDGPU(G0): [DRI2]   DRI driver: radeonsi
[     5.241] (II) AMDGPU(G0): [DRI2]   VDPAU driver: radeonsi
[     5.253] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[     5.253] (==) AMDGPU(G0): Backing store enabled
[     5.253] (II) AMDGPU(G0): Direct rendering enabled
[     5.257] (II) AMDGPU(G0): Use GLAMOR acceleration.
[     5.257] (II) AMDGPU(G0): Acceleration enabled
[     5.257] (==) AMDGPU(G0): DPMS enabled
[     5.257] (==) AMDGPU(G0): Silken mouse enabled
[     5.260] (II) Initializing extension Generic Event Extension
[     5.260] (II) Initializing extension SHAPE
[     5.260] (II) Initializing extension MIT-SHM
[     5.260] (II) Initializing extension XInputExtension
[     5.261] (II) Initializing extension XTEST
[     5.261] (II) Initializing extension BIG-REQUESTS
[     5.261] (II) Initializing extension SYNC
[     5.261] (II) Initializing extension XKEYBOARD
[     5.261] (II) Initializing extension XC-MISC
[     5.261] (II) Initializing extension SECURITY
[     5.262] (II) Initializing extension XFIXES
[     5.262] (II) Initializing extension RENDER
[     5.262] (II) Initializing extension RANDR
[     5.262] (II) Initializing extension COMPOSITE
[     5.262] (II) Initializing extension DAMAGE
[     5.263] (II) Initializing extension MIT-SCREEN-SAVER
[     5.263] (II) Initializing extension DOUBLE-BUFFER
[     5.263] (II) Initializing extension RECORD
[     5.263] (II) Initializing extension DPMS
[     5.263] (II) Initializing extension Present
[     5.263] (II) Initializing extension DRI3
[     5.263] (II) Initializing extension X-Resource
[     5.264] (II) Initializing extension XVideo
[     5.264] (II) Initializing extension XVideo-MotionCompensation
[     5.264] (II) Initializing extension SELinux
[     5.264] (II) SELinux: Disabled on system
[     5.264] (II) Initializing extension GLX
[     5.268] (II) AIGLX: Loaded and initialized radeonsi
[     5.268] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.268] (II) Initializing extension XFree86-VidModeExtension
[     5.268] (II) Initializing extension XFree86-DGA
[     5.268] (II) Initializing extension XFree86-DRI
[     5.268] (II) Initializing extension DRI2
[     5.271] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[     5.337] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[     5.337] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.337] (II) LoadModule: "libinput"
[     5.338] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     5.341] (II) Module libinput: vendor="X.Org Foundation"
[     5.341]  compiled for 1.20.8, module version = 0.30.0
[     5.341]  Module class: X.Org XInput Driver
[     5.341]  ABI class: X.Org XInput driver, version 24.1
[     5.341] (II) Using input driver '
libinput' for 'Power Button'
[     5.341] (**) Power Button: always reports core events
[     5.341] (**) Option "Device" "/dev/input/event5"
[     5.342] (**) Option "_source" "server/udev"
[     5.344] (II) event5  - Power Button: is tagged by udev as: Keyboard
[     5.345] (II) event5  - Power Button: device is a keyboard
[     5.345] (II) event5  - Power Button: device removed
[     5.373] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[     5.373] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.373] (**) Option "xkb_model" "pc105"
[     5.373] (**) Option "xkb_layout" "fr"
[     5.373] (**) Option "xkb_variant" "latin9"
[     5.395] (II) event5  - Power Button: is tagged by udev as: Keyboard
[     5.396] (II) event5  - Power Button: device is a keyboard
[     5.396] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[     5.396] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.396] (II) Using input driver '
libinput' for 'Video Bus'
[     5.396] (**) Video Bus: always reports core events
[     5.396] (**) Option "Device" "/dev/input/event2"
[     5.396] (**) Option "_source" "server/udev"
[     5.397] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[     5.397] (II) event2  - Video Bus: device is a keyboard
[     5.397] (II) event2  - Video Bus: device removed
[     5.453] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input3/event2"
[     5.453] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.453] (**) Option "xkb_model" "pc105"
[     5.454] (**) Option "xkb_layout" "fr"
[     5.454] (**) Option "xkb_variant" "latin9"
[     5.456] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[     5.456] (II) event2  - Video Bus: device is a keyboard
[     5.457] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     5.457] (II) No input driver specified, ignoring this device.
[     5.457] (II) This device may have been added with another device file.
[     5.457] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     5.457] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.457] (II) Using input driver '
libinput' for 'Power Button'
[     5.457] (**) Power Button: always reports core events
[     5.457] (**) Option "Device" "/dev/input/event3"
[     5.457] (**) Option "_source" "server/udev"
[     5.459] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     5.459] (II) event3  - Power Button: device is a keyboard
[     5.459] (II) event3  - Power Button: device removed
[     5.486] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[     5.486] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     5.486] (**) Option "xkb_model" "pc105"
[     5.486] (**) Option "xkb_layout" "fr"
[     5.486] (**) Option "xkb_variant" "latin9"
[     5.487] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     5.488] (II) event3  - Power Button: device is a keyboard
[     5.488] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[     5.488] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.488] (II) Using input driver '
libinput' for 'Sleep Button'
[     5.488] (**) Sleep Button: always reports core events
[     5.488] (**) Option "Device" "/dev/input/event4"
[     5.488] (**) Option "_source" "server/udev"
[     5.490] (II) event4  - Sleep Button: is tagged by udev as: Keyboard
[     5.490] (II) event4  - Sleep Button: device is a keyboard
[     5.490] (II) event4  - Sleep Button: device removed
[     5.513] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[     5.514] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     5.514] (**) Option "xkb_model" "pc105"
[     5.514] (**) Option "xkb_layout" "fr"
[     5.514] (**) Option "xkb_variant" "latin9"
[     5.515] (II) event4  - Sleep Button: is tagged by udev as: Keyboard
[     5.516] (II) event4  - Sleep Button: device is a keyboard
[     5.517] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[     5.517] (II) No input driver specified, ignoring this device.
[     5.517] (II) This device may have been added with another device file.
[     5.518] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse (/dev/input/event6)
[     5.518] (**) COOLER MASTER CM110 Gaming Mouse: Applying InputClass "libinput pointer catchall"
[     5.518] (II) Using input driver '
libinput' for 'COOLER MASTER CM110 Gaming Mouse'
[     5.518] (**) COOLER MASTER CM110 Gaming Mouse: always reports core events
[     5.518] (**) Option "Device" "/dev/input/event6"
[     5.518] (**) Option "_source" "server/udev"
[     5.580] (II) event6  - COOLER MASTER CM110 Gaming Mouse: is tagged by udev as: Mouse
[     5.580] (II) event6  - COOLER MASTER CM110 Gaming Mouse: device is a pointer
[     5.580] (II) event6  - COOLER MASTER CM110 Gaming Mouse: device removed
[     5.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.0/0003:2516:0119.0001/input/input8/event6"
[     5.618] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse" (type: MOUSE, id 10)
[     5.618] (**) Option "AccelerationScheme" "none"
[     5.618] (**) COOLER MASTER CM110 Gaming Mouse: (accel) selected scheme none/0
[     5.618] (**) COOLER MASTER CM110 Gaming Mouse: (accel) acceleration factor: 2.000
[     5.618] (**) COOLER MASTER CM110 Gaming Mouse: (accel) acceleration threshold: 4
[     5.680] (II) event6  - COOLER MASTER CM110 Gaming Mouse: is tagged by udev as: Mouse
[     5.680] (II) event6  - COOLER MASTER CM110 Gaming Mouse: device is a pointer
[     5.681] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse (/dev/input/mouse0)
[     5.681] (II) No input driver specified, ignoring this device.
[     5.681] (II) This device may have been added with another device file.
[     5.682] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse System Control (/dev/input/event9)
[     5.682] (**) COOLER MASTER CM110 Gaming Mouse System Control: Applying InputClass "libinput keyboard catchall"
[     5.682] (II) Using input driver '
libinput' for 'COOLER MASTER CM110 Gaming Mouse System Control'
[     5.682] (**) COOLER MASTER CM110 Gaming Mouse System Control: always reports core events
[     5.682] (**) Option "Device" "/dev/input/event9"
[     5.682] (**) Option "_source" "server/udev"
[     5.685] (II) event9  - COOLER MASTER CM110 Gaming Mouse System Control: is tagged by udev as: Keyboard
[     5.685] (II) event9  - COOLER MASTER CM110 Gaming Mouse System Control: device is a keyboard
[     5.685] (II) event9  - COOLER MASTER CM110 Gaming Mouse System Control: device removed
[     5.722] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:2516:0119.0002/input/input10/event9"
[     5.722] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse System Control" (type: KEYBOARD, id 11)
[     5.722] (**) Option "xkb_model" "pc105"
[     5.722] (**) Option "xkb_layout" "fr"
[     5.722] (**) Option "xkb_variant" "latin9"
[     5.725] (II) event9  - COOLER MASTER CM110 Gaming Mouse System Control: is tagged by udev as: Keyboard
[     5.725] (II) event9  - COOLER MASTER CM110 Gaming Mouse System Control: device is a keyboard
[     5.726] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse Consumer Control (/dev/input/event10)
[     5.726] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[     5.726] (II) Using input driver '
libinput' for 'COOLER MASTER CM110 Gaming Mouse Consumer Control'
[     5.726] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: always reports core events
[     5.726] (**) Option "Device" "/dev/input/event10"
[     5.726] (**) Option "_source" "server/udev"
[     5.728] (II) event10 - COOLER MASTER CM110 Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[     5.729] (II) event10 - COOLER MASTER CM110 Gaming Mouse Consumer Control: device is a keyboard
[     5.729] (II) event10 - COOLER MASTER CM110 Gaming Mouse Consumer Control: device removed
[     5.758] (II) libinput: COOLER MASTER CM110 Gaming Mouse Consumer Control: needs a virtual subdevice
[     5.758] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:2516:0119.0002/input/input11/event10"
[     5.758] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse Consumer Control" (type: MOUSE, id 12)
[     5.758] (**) Option "AccelerationScheme" "none"
[     5.758] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: (accel) selected scheme none/0
[     5.758] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: (accel) acceleration factor: 2.000
[     5.758] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: (accel) acceleration threshold: 4
[     5.761] (II) event10 - COOLER MASTER CM110 Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[     5.761] (II) event10 - COOLER MASTER CM110 Gaming Mouse Consumer Control: device is a keyboard
[     5.762] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse (/dev/input/event11)
[     5.762] (II) No input driver specified, ignoring this device.
[     5.762] (II) This device may have been added with another device file.
[     5.763] (II) config/udev: Adding input device COOLER MASTER CM110 Gaming Mouse Keyboard (/dev/input/event7)
[     5.763] (**) COOLER MASTER CM110 Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[     5.763] (II) Using input driver '
libinput' for 'COOLER MASTER CM110 Gaming Mouse Keyboard'
[     5.763] (**) COOLER MASTER CM110 Gaming Mouse Keyboard: always reports core events
[     5.763] (**) Option "Device" "/dev/input/event7"
[     5.763] (**) Option "_source" "server/udev"
[     5.765] (II) event7  - COOLER MASTER CM110 Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[     5.766] (II) event7  - COOLER MASTER CM110 Gaming Mouse Keyboard: device is a keyboard
[     5.766] (II) event7  - COOLER MASTER CM110 Gaming Mouse Keyboard: device removed
[     5.790] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:2516:0119.0002/input/input9/event7"
[     5.790] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse Keyboard" (type: KEYBOARD, id 13)
[     5.790] (**) Option "xkb_model" "pc105"
[     5.790] (**) Option "xkb_layout" "fr"
[     5.790] (**) Option "xkb_variant" "latin9"
[     5.792] (II) event7  - COOLER MASTER CM110 Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[     5.792] (II) event7  - COOLER MASTER CM110 Gaming Mouse Keyboard: device is a keyboard
[     5.793] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event15)
[     5.793] (II) No input driver specified, ignoring this device.
[     5.793] (II) This device may have been added with another device file.
[     5.794] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event16)
[     5.794] (II) No input driver specified, ignoring this device.
[     5.794] (II) This device may have been added with another device file.
[     5.794] (II) config/udev: Adding input device gpio-keys (/dev/input/event17)
[     5.794] (II) No input driver specified, ignoring this device.
[     5.794] (II) This device may have been added with another device file.
[     5.795] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     5.795] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     5.795] (II) Using input driver '
libinput' for 'AT Translated Set 2 keyboard'
[     5.795] (**) AT Translated Set 2 keyboard: always reports core events
[     5.795] (**) Option "Device" "/dev/input/event0"
[     5.795] (**) Option "_source" "server/udev"
[     5.796] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     5.796] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     5.797] (II) event0  - AT Translated Set 2 keyboard: device removed
[     5.818] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     5.818] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[     5.818] (**) Option "xkb_model" "pc105"
[     5.818] (**) Option "xkb_layout" "fr"
[     5.818] (**) Option "xkb_variant" "latin9"
[     5.820] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     5.820] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     5.822] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[     5.822] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     5.822] (II) Using input driver '
libinput' for 'SynPS/2 Synaptics TouchPad'
[     5.822] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     5.822] (**) Option "Device" "/dev/input/event8"
[     5.822] (**) Option "_source" "server/udev"
[     5.823] (II) event8  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     5.824] (II) event8  - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     5.825] (II) event8  - SynPS/2 Synaptics TouchPad: device is a touchpad
[     5.825] (II) event8  - SynPS/2 Synaptics TouchPad: device removed
[     5.882] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event8"
[     5.882] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[     5.884] (**) Option "AccelerationScheme" "none"
[     5.884] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[     5.884] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     5.884] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     5.885] (II) event8  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     5.886] (II) event8  - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     5.887] (II) event8  - SynPS/2 Synaptics TouchPad: device is a touchpad
[     5.888] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[     5.888] (II) No input driver specified, ignoring this device.
[     5.888] (II) This device may have been added with another device file.
[     5.889] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[     5.889] (II) No input driver specified, ignoring this device.
[     5.889] (II) This device may have been added with another device file.
[     5.889] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event13)
[     5.889] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.889] (II) Using input driver '
libinput' for 'MSI WMI hotkeys'
[     5.889] (**) MSI WMI hotkeys: always reports core events
[     5.889] (**) Option "Device" "/dev/input/event13"
[     5.889] (**) Option "_source" "server/udev"
[     5.890] (II) event13 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[     5.890] (II) event13 - MSI WMI hotkeys: device is a keyboard
[     5.891] (II) event13 - MSI WMI hotkeys: device removed
[     5.937] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event13"
[     5.937] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 16)
[     5.937] (**) Option "xkb_model" "pc105"
[     5.937] (**) Option "xkb_layout" "fr"
[     5.938] (**) Option "xkb_variant" "latin9"
[     5.939] (II) event13 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[     5.939] (II) event13 - MSI WMI hotkeys: device is a keyboard
[     5.945] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[     5.945] (II) Using input driver '
libinput' for 'COOLER MASTER CM110 Gaming Mouse Consumer Control'
[     5.945] (**) COOLER MASTER CM110 Gaming Mouse Consumer Control: always reports core events
[     5.945] (**) Option "Device" "/dev/input/event10"
[     5.945] (**) Option "_source" "_driver/libinput"
[     5.946] (II) libinput: COOLER MASTER CM110 Gaming Mouse Consumer Control: is a virtual subdevice
[     5.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.3/usb1/1-2/1-2:1.1/0003:2516:0119.0002/input/input11/event10"
[     5.946] (II) XINPUT: Adding extended input device "COOLER MASTER CM110 Gaming Mouse Consumer Control" (type: KEYBOARD, id 17)
[     5.946] (**) Option "xkb_model" "pc105"
[     5.946] (**) Option "xkb_layout" "fr"
[     5.946] (**) Option "xkb_variant" "latin9"
[     5.953] (EE) Failed to open authorization file "/var/run/sddm/{0930d6a0-22db-45d4-83dd-d5615c927dfa}": No such file or directory
[    10.583] (II) AMDGPU(0): EDID vendor "AUO", prod id 38799
[    10.583] (II) AMDGPU(0): Using EDID range info for horizontal sync
[    10.583] (II) AMDGPU(0): Using EDID range info for vertical refresh
[    10.583] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    10.583] (II) AMDGPU(0): Modeline "1920x1080"x0.0  368.14  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (175.1 kHz eP)
[    10.583] (II) AMDGPU(0): Modeline "1920x1080"x0.0  153.40  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (73.0 kHz e)
[    10.665] (II) event8  - SynPS/2 Synaptics TouchPad: device removed
[    10.677] (II) AMDGPU(0): EDID vendor "AUO", prod id 38799
[    10.677] (II) AMDGPU(0): Using hsync ranges from config file
[    10.677] (II) AMDGPU(0): Using vrefresh ranges from config file
[    10.677] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    10.677] (II) AMDGPU(0): Modeline "1920x1080"x0.0  368.14  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (175.1 kHz eP)
[    10.677] (II) AMDGPU(0): Modeline "1920x1080"x0.0  153.40  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (73.0 kHz e)

Hors ligne

#36 01-11-2020 10:41:10

anonyme
Invité

Re : HDMI amdgpu

ton log est parfait
j'ai trouvé ceci


[     5.159] (II) AMDGPU(G0): Output HDMI-A-1-0 has no monitor section
[     5.159] (II) AMDGPU(G0): EDID for output HDMI-A-1-0
[     5.159] (II) AMDGPU(G0): mem size init: gart size :fe5be000 vram size: s:fe0e4000 visible:fe34000
[     5.159] (==) AMDGPU(G0): DPI set to (96, 96)
 


tu a un écran allumé et branché sur la sortie HDMI actuellement ?
pour la sortie eDP (écran du portable ) aucun souci


[     5.144] (II) AMDGPU(0): Printing probed modes for output eDP
[     5.144] (II) AMDGPU(0): Modeline "1920x1080"x144.0  368.14  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (175.1 kHz eP)
[     5.144] (II) AMDGPU(0): Modeline "1920x1080"x60.0  153.40  1920 1968 2000 2102  1080 1090 1095 1216 -hsync -vsync (73.0 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1680x1050"x144.0  368.14  1680 1968 2000 2102  1050 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1280x1024"x144.0  368.14  1280 1968 2000 2102  1024 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1440x900"x144.0  368.14  1440 1968 2000 2102  900 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1280x800"x144.0  368.14  1280 1968 2000 2102  800 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1280x720"x144.0  368.14  1280 1968 2000 2102  720 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "1024x768"x144.0  368.14  1024 1968 2000 2102  768 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "800x600"x144.0  368.14  800 1968 2000 2102  600 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Modeline "640x480"x144.0  368.14  640 1968 2000 2102  480 1090 1095 1216 -hsync -vsync (175.1 kHz e)
[     5.144] (II) AMDGPU(0): Output eDP connected
[     5.144] (II) AMDGPU(0): Using exact sizes for initial modes
[     5.144] (II) AMDGPU(0): Output eDP using initial mode 1920x1080 +0+0
 



pour le driver c'est correct , le couple modeset + amdgpu
bref tout va bien sauf le HDMI  roll
les portables me donne la migraine  hmm

#37 01-11-2020 10:47:35

anonyme
Invité

Re : HDMI amdgpu

je te met un exemple d un ordinateur de bureau (rien a voir avec un portable )
c'est hors sujet mais pour comprendre qu il y a un souci sur le portable et malheureusement je sais pas lequel
ps: je peu mettre en théorie 6 écrans sur ma machine ( 2x3)

un pc de bureau tout est clair et fonctionnel , les sorties sont bien listées

ma carte AMD avec un écran  driver libre pour afficher le bureau


[     7.062] (II) AMDGPU(0): Monitor name: B193W
[     7.062] (II) AMDGPU(0): EDID (in hex):
[     7.062] (II) AMDGPU(0):  00ffffffffffff00047217004c357084
[     7.062] (II) AMDGPU(0):  2f12010380291a78ead7a5a2594a9624
[     7.062] (II) AMDGPU(0):  145054bfef909500950f81808140714f
[     7.062] (II) AMDGPU(0):  0101010101019a29a0d0518422305098
[     7.062] (II) AMDGPU(0):  36009a001100001c000000ff004c424c
[     7.062] (II) AMDGPU(0):  3043303234343035320a000000fd0032
[     7.062] (II) AMDGPU(0):  4b1e520e000a202020202020000000fc
[     7.062] (II) AMDGPU(0):  0042313933570a202020202020200094
[     7.062] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[     7.062] (II) AMDGPU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[     7.062] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1280x800"x59.9  106.50  1280 1520 1672 1904  800 903 909 934 -hsync +vsync (55.9 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1280x720"x59.9  106.50  1280 1520 1672 1904  720 903 909 934 -hsync +vsync (55.9 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     7.062] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     7.062] (II) AMDGPU(0): EDID for output HDMI-A-0
[     7.062] (II) AMDGPU(0): EDID for output DVI-D-0
[     7.062] (II) AMDGPU(0): Output DisplayPort-0 connected
[     7.062] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[     7.062] (II) AMDGPU(0): Output DVI-D-0 disconnected
[     7.062] (II) AMDGPU(0): Using exact sizes for initial modes
[     7.062] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 1440x900 +0+0
[     7.062] (II) AMDGPU(0): mem size init: gart size :bf86f000 vram size: s:7f1bc000 visible:7f1bc000
[     7.062] (==) AMDGPU(0): DPI set to (96, 96)
[     7.062] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.062] (II) Loading sub module "ramdac"
[     7.062] (II) LoadModule: "ramdac"
[     7.062] (II) Module "ramdac" already built-in
 


ma carte nvidia sans écran pour bosser sur cuda driver nonfree


[     7.122] (II) NVIDIA GLX Module  450.66  Wed Aug 12 19:41:37 UTC 2020
[     7.123] (II) NVIDIA: The X server supports PRIME Render Offload.
[     7.154] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:9:0:0
[     7.154] (--) NVIDIA(0):     CRT-0
[     7.154] (--) NVIDIA(0):     DFP-0
[     7.154] (--) NVIDIA(0):     DFP-1
[     7.155] (II) NVIDIA(G0): NVIDIA GPU GeForce GTX 750 Ti (GM107-A) at PCI:9:0:0 (GPU-0)
[     7.155] (--) NVIDIA(G0): Memory: 2097152 kBytes
[     7.155] (--) NVIDIA(G0): VideoBIOS: 82.07.32.00.18
[     7.155] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[     7.156] (--) NVIDIA(GPU-0): CRT-0: disconnected
[     7.156] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[     7.156] (--) NVIDIA(GPU-0):
[     7.156] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     7.156] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     7.156] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     7.156] (--) NVIDIA(GPU-0):
[     7.156] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     7.156] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     7.156] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[     7.156] (--) NVIDIA(GPU-0):
[     7.156] (II) NVIDIA(G0): Validated MetaModes:
[     7.156] (II) NVIDIA(G0):     "NULL"
[     7.156] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[     7.156] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[     7.156] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
 



toutes mes sorties sont bien listées

#38 01-11-2020 10:53:27

anonyme
Invité

Re : HDMI amdgpu

tu a 2 cartes graphiques tu connais leur nom
je suppose l'apu du cpu


[     4.979] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x1636)
[     5.137] (II) AMDGPU(0): glamor X acceleration enabled on AMD RENOIR (DRM 3.39.0, 5.9.0-1-amd64, LLVM 10.0.1)
 



la seconde 5500M on la voit pas ?

si si tongue


[     5.159] (II) AMDGPU(G0): glamor X acceleration enabled on Radeon RX 5500M (NAVI14, DRM 3.39.0, 5.9.0-1-amd64, LLVM 10.0.1)
 



"amdgpu 0" c'est renoir l'apu et  "amdgpu G0" c'est la 5500M

Dernière modification par anonyme (01-11-2020 11:03:51)

#39 01-11-2020 10:55:51

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : HDMI amdgpu

ch'tite indiscrétion :

pardon pour le dérangement :

apt install inxi


inxi -Fr

Hors ligne

#40 01-11-2020 11:05:26

anonyme
Invité

Re : HDMI amdgpu

donc tout va bien mais pas de HDMI roll

#41 02-11-2020 22:13:41

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.10.0-19-amd64
(G)UI : gnome wayland
Inscription : 01-09-2007

Re : HDMI amdgpu

Robert si tu veux j'ai du zaldiar pour la tête ça marche du tonnerre ...
Je me suis résigné a ne pas avoir la sortie hdmi .

Alain voici la réponse :

ludo@debian:~$ inxi -Fr
System:    Host: debian Kernel: 5.9.0-1-amd64 x86_64 bits: 64 Desktop: KDE Plasma 5.17.5 Distro: Debian GNU/Linux bullseye/sid
Machine:   Type: Laptop System: Micro-Star product: Bravo 17 A4DDR v: REV:1.0 serial: <superuser/root required>
           Mobo: Micro-Star model: MS-17FK v: REV:1.0 serial: <superuser/root required> BIOS: American Megatrends
           v: E17FKAMS.113 date: 05/18/2020
Battery:   ID-1: BAT1 charge: 45.1 Wh condition: 49.5/51.3 Wh (96%)
CPU:       Info: 6-Core model: AMD Ryzen 5 4600H with Radeon Graphics bits: 64 type: MT MCP L2 cache: 3072 KiB
           Speed: 1611 MHz min/max: 1400/3000 MHz Core speeds (MHz): 1: 1391 2: 1440 3: 3992 4: 3979 5: 1341 6: 1330 7: 1380
           8: 1431 9: 1772 10: 1770 11: 1770 12: 1774
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] Navi 14 [Radeon RX 5500/5500M / Pro 5500M] driver: amdgpu v: kernel
           Device-2: Advanced Micro Devices [AMD/ATI] Renoir driver: amdgpu v: kernel
           Display: x11 server: X.Org 1.20.8 driver: amdgpu FAILED: ati unloaded: fbdev,modesetting,radeon,vesa
           resolution: 1920x1080~144Hz
           OpenGL: renderer: AMD RENOIR (DRM 3.39.0 5.9.0-1-amd64 LLVM 10.0.1) v: 4.6 Mesa 20.1.9
Audio:     Device-1: Advanced Micro Devices [AMD/ATI] Navi 10 HDMI Audio driver: snd_hda_intel
           Device-2: Advanced Micro Devices [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor driver: N/A
           Device-3: Advanced Micro Devices [AMD] Family 17h HD Audio driver: snd_hda_intel
           Sound Server: ALSA v: k5.9.0-1-amd64
Network:   Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi
           IF: wlp4s0 state: down mac: 92:ae:93:ec:ec:95
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
           IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: 00:d8:61:e6:6c:6b
Drives:    Local Storage: total: 476.94 GiB used: 62.64 GiB (13.1%)
           ID-1: /dev/nvme0n1 model: SSSTC CL1-8D512 size: 476.94 GiB
Partition: ID-1: / size: 45.58 GiB used: 16.55 GiB (36.3%) fs: ext4 dev: /dev/nvme0n1p1
           ID-2: /home size: 418.94 GiB used: 46.10 GiB (11.0%) fs: ext4 dev: /dev/nvme0n1p5
Swap:      ID-1: swap-1 type: partition size: 3.73 GiB used: 0 KiB (0.0%) dev: /dev/nvme0n1p6
Sensors:   System Temperatures: cpu: 68.2 C mobo: N/A
           Fan Speeds (RPM): N/A
           GPU: device: amdgpu temp: 54.0 C device: amdgpu temp: N/A
Repos:     Active apt repos in: /etc/apt/sources.list
           1: deb http://deb.debian.org/debian/ testing main contrib non-free
           2: deb http://deb.debian.org/debian-security/ testing-security/updates main contrib non-free
           3: deb http://deb.debian.org/debian/ testing-updates main contrib non-free
           4: deb http://www.deb-multimedia.org/ testing main non-free
           5: deb http://files.eid.belgium.be/debian/ buster main
           6: deb https://dl.winehq.org/wine-builds/debian/ buster main
Info:      Processes: 284 Uptime: 4m Memory: 15.11 GiB used: 1.76 GiB (11.6%) Shell: Bash inxi: 3.1.08




Wah !!! magique ce paquet inxi, ca donne une réponse précise des drivers et  coloré ! on y vois de suite plus clair.
Il y a un truc qui coince ici, driver amdgpu FAILED :

 Display: x11 server: X.Org 1.20.8 driver: amdgpu FAILED: ati unloaded: fbdev,modesetting,radeon,vesa

Dernière modification par ludopika (02-11-2020 22:21:23)

Hors ligne

#42 02-11-2020 23:59:31

anonyme
Invité

Re : HDMI amdgpu

ton #35 dit le contraire , le driver amdgpu ok
tu peu vérifier ton gpu principal (apu du cpu (renoir) ) avec glxinfo -B
il faut le paquet "mesa-utils" installé
et en user faire


glxinfo -B
 



tu a aussi xrandr


xrandr
 

#43 11-11-2020 01:24:00

ludopika
Membre
Lieu : France / Belgique
Distrib. : debian bullseye
Noyau : Linux 5.10.0-19-amd64
(G)UI : gnome wayland
Inscription : 01-09-2007

Re : HDMI amdgpu

Bonjour,

Problème résolu en parti.
Voici comment :

1/ j'ai tenté l'install full-kde sous buster avec kernel unstable (5.9) => tjs pas d'hdmi, pas de reboot sans plantage et instababilité avec plantage driver carte réseaux ...
2/ j'ai tenté le server wayland à la place de X11 sous kde => une catastrophe ! kernel panic !
3/ j'ai installé gnome sous buster => un léger mieux, au moins le reboot fonctionnait ... tjs pas hdmi
4/ finalement j'ai installé gnome avec sources.list bullseye (testing) + kernel unstable (5.9) => et la miracle ! gnome avec wayland ...

Ce qui fonctionne :
- port hdmi (2ième écran ou tv)
- reboot propre sans plantage (freeze)
- stabilité sans perte connection
- possibilité de lancer les jeux avec le GPU dédié (la carte graphique, 1ere fois que j'entend le ventilo CG tongue)

Ce qui ne fonctionne pas :
- pas de son sortie hdmi vers tv (en cours de recherche problème connu)
- sortie de veille provoque un freeze (du coup j'ai désactivé la veille)
- gnome en version standard sous x11 fonctionne mais pas d'hdmi.

Je ne met pas résolu car je vais encore essayer de répondre au problème de son.

Dernière modification par ludopika (11-11-2020 20:52:02)

Hors ligne

Pied de page des forums