Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 29-09-2020 10:00:24

martine
Membre
Inscription : 29-09-2020

[Résolu] Installation DFLinux sur Asus E402B

Bonjour, je débute sous Linux !

Un ami m'a prêté une cléVentoy, je boote correctement sur la DFLinux 10.5-1, mais impossible d'accéder au menu whisker : juste un truc transparent, pas possible de faire un clic droit sur le bureau, pas de réaction avec ctrl-alt-T
Donc impossible d'envoyer des détails !

Alors qu'une Manjaro sur la même clé est parfaitement fonctionnelle.

Que me conseillez-vous ? est-il possible d'avoir une Debian sur ce matériel ?

Dernière modification par martine (01-10-2020 09:08:54)

Hors ligne

#2 29-09-2020 12:32:15

arpinux
CA Debian-Facile
Lieu : Montréal d'aude
Distrib. : debian stable
Noyau : 4.9-amd64
(G)UI : noDE
Inscription : 30-06-2016
Site Web

Re : [Résolu] Installation DFLinux sur Asus E402B

bonjour martine smile

et tu ne souhaites pas installer Manjaro ? si tu souhaite vraiment installer Debian, pourrais-tu tester de lancer une session "live sans échec" de Dfiso depuis ta clé Ventoy ?

nous sommes tous différents ... c'est notre point commun ...
Association Debian-Facile -- Les cahiers du débutant -- ISO Debian-Facile -- anar'prez

Hors ligne

#3 29-09-2020 13:08:27

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

C'est à priori ce que je veux faire, je vais donc tenter çà de ce pas !

Voilà, manifestement ça bloque.

1601389362.jpg

Dernière modification par martine (29-09-2020 13:58:00)

Hors ligne

#4 29-09-2020 14:10:36

Caribou22
CA Debian-Facile
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stable
Noyau : Sans pépins
(G)UI : Xfce, Gnome
Inscription : 10-11-2014
Site Web

Re : [Résolu] Installation DFLinux sur Asus E402B

Bonjour smile
Quel est le modèle de carte graphique sur cet ordi ?

Hors ligne

#5 29-09-2020 14:23:10

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

Voilà ce que me donne Manjaro :

System:
  Host: manjaro Kernel: 5.6.15-1-MANJARO x86_64 bits: 64 compiler: gcc
  v: 10.1.0 Desktop: Xfce 4.14.2 tk: Gtk 3.24.20 info: xfce4-panel wm: xfwm4
  dm: LightDM 1.30.0 Distro: Manjaro Linux
Machine:
  Type: Laptop System: ASUSTeK product: E402BA v: 1.0
  serial: <root required>
  Mobo: ASUSTeK model: E402BA v: 1.0 serial: <root required>
  UEFI [Legacy]: American Megatrends v: E402BA.305 date: 05/11/2017
Battery:
  ID-1: BAT0 charge: 30.2 Wh condition: 31.0/36.8 Wh (84%) volts: 7.7/7.7
  model: ASUSTeK ASUS Battery type: Li-ion serial:   status: Not charging
  cycles: 31
  Device-1: hidpp_battery_2 model: Logitech Wireless Mouse M185
  serial: 4008-03-e8-c0-b4 charge: 55% (should be ignored) rechargeable: yes
  status: Discharging
CPU:
  Topology: Dual Core model: AMD A6-9220 RADEON R4 5 COMPUTE CORES 2C+3G
  bits: 64 type: MCP arch: Excavator L2 cache: 1024 KiB
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  bogomips: 9985
  Speed: 2855 MHz min/max: 1300/2500 MHz boost: enabled Core speeds (MHz):
  1: 1877 2: 2239
Graphics:
  Device-1: AMD Stoney [Radeon R2/R3/R4/R5 Graphics] vendor: ASUSTeK
  driver: amdgpu v: kernel bus ID: 00:01.0 chip ID: 1002:98e4
  Display: x11 server: X.Org 1.20.8 driver: amdgpu,ati unloaded: modesetting
  alternate: fbdev,vesa resolution: 1920x1080~60Hz
  OpenGL: renderer: AMD STONEY (DRM 3.36.0 5.6.15-1-MANJARO LLVM 10.0.0)
  v: 4.5 Mesa 20.0.7 direct render: Yes
Audio:
  Device-1: AMD vendor: ASUSTeK driver: snd_hda_intel v: kernel
  bus ID: 00:01.1 chip ID: 1002:15b3
  Device-2: AMD Family 15h Audio vendor: ASUSTeK driver: snd_hda_intel
  v: kernel bus ID: 00:09.2 chip ID: 1022:157a
  Sound Server: ALSA v: k5.6.15-1-MANJARO
Network:
  Device-1: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter
  vendor: AzureWave driver: ath9k v: kernel port: f100 bus ID: 01:00.0
  chip ID: 168c:0036
  IF: wlp1s0 state: down mac: 82:35:fa:a2:3e:23
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  vendor: ASUSTeK driver: r8169 v: kernel port: e000 bus ID: 02:00.0
  chip ID: 10ec:8168
  IF: enp2s0 state: down mac: b0:6e:bf:15:78:d9
Drives:
  Local Storage: total: 1.85 TiB used: 101.49 GiB (5.4%)
  ID-1: /dev/sda vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB
  speed: 6.0 Gb/s rotation: 5400 rpm serial: ZDE2CNAQ rev: SDM1 scheme: GPT
  ID-2: /dev/sdb type: USB vendor: Lexar model: USB Flash Drive
  size: 29.88 GiB serial: AA5E6YI68FNX5UXW rev: 1100 scheme: MBR
  ID-3: /dev/sdc type: USB vendor: Toshiba model: External USB 3.0
  size: 931.51 GiB serial: 20190521005077F rev: 5438 scheme: MBR
Partition:
  ID-1: / size: 2.78 GiB used: 61.6 MiB (2.2%) fs: overlay source: ERR-102
Sensors:
  System Temperatures: cpu: 53.9 C mobo: N/A gpu: amdgpu temp: 54 C
  Fan Speeds (RPM): cpu: 2900
Info:
  Processes: 172 Uptime: 6m Memory: 3.71 GiB used: 709.3 MiB (18.7%)
  Init: systemd v: 245 Compilers: gcc: 10.1.0 Shell: bash v: 5.0.17
  running in: xfce4-terminal inxi: 3.0.37

Hors ligne

#6 29-09-2020 15:46:33

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [Résolu] Installation DFLinux sur Asus E402B

Bonjour
installe le paquet "firmware-amd-graphics" en ayant activé le "contrib non-ree" dans ton sources.list


nano /etc/apt/sources.list
 


avec ceci dedans


deb http://deb.debian.org/debian/ buster main contrib non-free
deb http://security.debian.org/debian-security buster/updates main contrib non-free
deb http://deb.debian.org/debian/ buster-updates main contrib non-free
 




apt update
 




apt-get install firmware-amd-graphics
 



et reboot

nota:
si tu utilise le compte "root" utilise "su -" (et pas "su")

pour faire ceci démarrer en mode dépannage de debian et activer le réseau (si tu n'a pas la main en démarrage normal )

ps: précise si tu est en wifi ou en filaire pour avoir le net .

Dernière modification par robert2a (29-09-2020 15:48:20)

Hors ligne

#7 29-09-2020 16:29:36

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

Alors, merci pour ça, maintenant, comment puis je faire en session live, puisque je n'accède pas au terminal ?
Pour les non-free, ça doit déjà être en place puisque j'utilise DLinux, mais ensuite ?
Autre solution : j'installe puis je tente la commande ?
Puis je la passer avec un simple sudo ?
Normalement je peux en Wii et via Ethernet

Dernière modification par martine (29-09-2020 16:33:04)

Hors ligne

#8 29-09-2020 17:05:39

Jean-Pierre Pinson
Membre
Lieu : Orléans
Distrib. : Trisquel 8 64bits Ordi.: Thinkpad T400
Noyau : 4.15.0-55-generic x86_64
(G)UI : xfce
Inscription : 04-03-2017

Re : [Résolu] Installation DFLinux sur Asus E402B

Pour passer en root

su -

sans oublier l'espace entre su et le tiré


Et pour revenir en simple utilisateurs

exit

Dernière modification par Jean-Pierre Pinson (29-09-2020 17:07:02)


Trisquel 8 64bits
Bureau : xfce
Ordinateur : Thinkpad T400 libreboot

En ligne

#9 29-09-2020 17:46:35

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Leap 15.2
Noyau : Linux 5.3.18
(G)UI : KDE 5.18.5
Inscription : 11-03-2016

Re : [Résolu] Installation DFLinux sur Asus E402B

Bonjour smile
martine indique qu'elle souhaite installer la version DFlinux 10.5-1 donc elle doit utiliser sudo pour l'administration et non su.
Les dépôts contrib et non-free sont effectivement activés.
Le paquet firmware-amd est installé dès le départ donc après avoir installé le système, pas besoin de faire les commandes de robert2a.
par contre je ne sais pas si ça fonctionne pour un test en Live.
Il y a un message d'erreur sur la capture d'écran

VGACON disables amdgpu kernel modesetting

Hors ligne

#10 29-09-2020 20:07:19

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

Bonsoir, merci pour votre attention à tous !

J'ai donc installé suite au post de chalu. Hélas, c'est exactement la même chose.
C'est très curieux : si l'on ouvre une fenètre, pour voir son contenu il faut cliquer sur le bureau, puis si l'on sélectionne un fichier sur le fenêtre, il faut à nouveau cliquer sur le bureau.
Le menu apparaît en transparent, les icônes comme par exemple celle du réseau permettant d'activer le wifi sont... inactives.
Je peux accéder au tty, mais à ce stade ne peux sélectionner un point wifi.
Je dois pouvoir tenter ethernet

Là, par contre,

Hors ligne

#11 30-09-2020 05:27:16

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Leap 15.2
Noyau : Linux 5.3.18
(G)UI : KDE 5.18.5
Inscription : 11-03-2016

Re : [Résolu] Installation DFLinux sur Asus E402B

Bonjour,
Je ferais une installation  classique en mettant l’iso de DFlinux seule sur une clé à l’aide du logiciel etcher par exemple.

Hors ligne

#12 30-09-2020 08:01:37

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

Bonjour et merci, hélas, exactement le même comportement en session live depuis une USB flashée avec BalenaEtcher hmm

Hors ligne

#13 30-09-2020 12:39:28

Caribou22
CA Debian-Facile
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stable
Noyau : Sans pépins
(G)UI : Xfce, Gnome
Inscription : 10-11-2014
Site Web

Re : [Résolu] Installation DFLinux sur Asus E402B

Bonjour smile

Si ça fonctionne avec Manjaro et pas avec Debian, on pourrait tenter d'installer un noyau plus récent dans ta Debian (Backports).
Mais je n'ai pas fait ça depuis un moment hmm Si quelqu’un a la procédure

Hors ligne

#14 30-09-2020 12:47:15

jarek
Membre
Lieu : Haute Loire
Distrib. : bullseye
Noyau : linux 5.8.0 amd64
(G)UI : Xfce4 - LightDM
Inscription : 24-06-2014

Re : [Résolu] Installation DFLinux sur Asus E402B

Moi je ferais comme a dit chalu   tongue  parce que son matériel est quand même bien mûr . . .

Dernière modification par jarek (30-09-2020 12:47:42)


Le Diable a inventé l'Administration afin que les Hommes perdent tout espoir à jamais.
Ryzen3 3200G - Asrock B450

Hors ligne

#15 30-09-2020 14:30:35

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

J'ai repassé l'installation ! mêmes symptômes à l'arrivée

Hors ligne

#16 30-09-2020 18:11:15

Caribou22
CA Debian-Facile
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stable
Noyau : Sans pépins
(G)UI : Xfce, Gnome
Inscription : 10-11-2014
Site Web

Re : [Résolu] Installation DFLinux sur Asus E402B

J'ai deux pistes, à tester indépendamment sur une installation vierge de préférence :

Solution 1 : Trouvaille avec le message d'erreur relevé par chalu : https://www.reddit.com/r/linuxquestions … desetting/

Pour le tester en session live :

- Dans le menu de boot de la clé, place toi sur l'option "tester Debian" et appuie sur TAB.
- Une ligne de commande apparaît, déplace toi après les mots quiet splash pour ajouter à la suite "amdgpu.dc=0" (sans les guillemets, et si tu es en qwerty, tapes q,dgpu:dc=à )
- démarre avec Entrée et regarde si les bugs sont toujours présents.

Si le test en live est concluant, voici comment l'appliquer sur le système installé :

Depuis ton système installé, édite ton fichier grub avec cette commande :

nano /etc/default/grub


C'est une commande root, donc dans DFiso, ajoutes-y le préfixe sudo :

sudo nano /etc/default/grub



Le fichier est comme ceci dans DFiso Buster normalement :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="initrd=/install/gtk/initrd.gz"

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



A la ligne GRUB_CMDLINE_LINUX_DEFAULT="quiet splash", ajoute le paramètre amdgpu.dc=0 pour obtenir ceci :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash amdgpu.dc=0"
GRUB_CMDLINE_LINUX="initrd=/install/gtk/initrd.gz"

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



Pour enregistrer : Ctrl+X, puis la lettre O puis Entrée.

Puis pour appliquer :

sudo update-grub


le changement sera définitif smile

Solution 2 : Hypothèse que Manjaro marche mieux car elle a un noyau Linux plus récent.

Depuis ta Debian installée, essaye ceci :
Essaye d'ouvrir un terminal avec Super + T (Super = touche Windows)
Si ça ne marche pas, passer en console tty avec Ctrl+Alt+F1 fonctionnera aussi

Et saisis ceci  afin d'éditer ton sources.list

sudo nano /etc/apt/sources.list



Et ajoute cette ligne à la fin du fichier (dépôt buster-backports contenant des paquets plus récents) :

deb http://deb.debian.org/debian/ buster-backports main contrib non-free



Pour enregistrer : Ctrl+X, puis la lettre O puis Entrée.

Puis ensuite, saisis ces commandes pour installer un noyau Linux plus récents (issu du dépôts backports):

sudo apt update


sudo apt-get -t buster-backports install linux-image-amd64


Et redémarre ton ordi. Il y a des chances que ça améliore les choses ! smile

sudo nano /etc/default/grub

Dernière modification par Caribou22 (01-10-2020 11:07:31)

Hors ligne

#17 30-09-2020 21:02:46

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

Merci de vous occuper de moi smile

Je viens de tester la méthode 1,hélas rien ne change.
Je vais faire la 2 mais un peu plus tard : il faut que je retrouve les câbles !

Hors ligne

#18 01-10-2020 09:08:11

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

Youpi !
Solution 2 a résolu le problème !

J'ai supprimé l'ajout au fichier grub, du coup.

Merci ! smile


[Edit] me voilà avec un noyau 5.7 tout neuf en plus du 4.19, se mettra t'il à jour avec les commandes classiques ou avec pk-update ?

Dernière modification par martine (01-10-2020 09:11:45)

Hors ligne

#19 01-10-2020 09:33:08

smolski
quasi...modo
Lieu : AIN
Distrib. : backports (buster) 10
Noyau : Linux 4.19.0-8-amd64
(G)UI : gnome
Inscription : 21-10-2008

Re : [Résolu] Installation DFLinux sur Asus E402B

La commande autoremove sert à supprimer les paquets obsolètes.
La commande :

sudo apt autoremove


"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#20 01-10-2020 11:00:44

Caribou22
CA Debian-Facile
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stable
Noyau : Sans pépins
(G)UI : Xfce, Gnome
Inscription : 10-11-2014
Site Web

Re : [Résolu] Installation DFLinux sur Asus E402B

Ah super ! big_smile
Oui, il se mettra à jour tout seul wink Il changera de version régulièrement jusqu'au gel de la future version stable de Debian (11 Bullseye) il me semble.

Il se mettra à jour en même temps que tes mises à jour classiques, quelque-soit l'outil utilisé. Si tu as installé la 10.5-1, il n'y a plus pk-update-icon normalement, et les mises à jour sont automatiques. Mais tu es libre de ré-installer ce gestionnaire de mises à jour si tu le souhaites smile

Dernière modification par Caribou22 (01-10-2020 11:02:18)

Hors ligne

#21 01-10-2020 12:06:51

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

Merci à tous !

J'ai fait le autoremove, il a gardé le 4.19 (il fait collection ?)
Je peux supprimer le pk update ?

Hors ligne

#22 01-10-2020 16:15:51

smolski
quasi...modo
Lieu : AIN
Distrib. : backports (buster) 10
Noyau : Linux 4.19.0-8-amd64
(G)UI : gnome
Inscription : 21-10-2008

Re : [Résolu] Installation DFLinux sur Asus E402B

martine a écrit :

J'ai fait le autoremove, il a gardé le 4.19


Probablement que tu as une apllication qui l'utilise... cool


"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#23 01-10-2020 16:31:15

martine
Membre
Inscription : 29-09-2020

Re : [Résolu] Installation DFLinux sur Asus E402B

Mon ami a fait une mise à jour du Bios, ça peut toujours aider.

Il reste quelques erreurs, c'est grave docteurs ?

[    0.000000] Linux version 5.7.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6), GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Debian 5.7.10-1~bpo10+1 (2020-07-30)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.7.0-0.bpo.2-amd64 root=UUID=3bc719bc-b403-4282-ab3b-f9d6fd8ca814 ro acpi_osi=Linux quiet splash
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x20b/0x2b0 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000e4b96fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e4b97000-0x00000000e5672fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e5673000-0x00000000e569dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000e569e000-0x00000000e57b1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000e57b2000-0x00000000e5b29fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e5b2a000-0x00000000e6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e7000000-0x00000000e7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe700000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000111ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000112000000-0x0000000116ffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xa97ae018-0xa97bde57] usable ==> usable
[    0.000000] e820: update [mem 0xa97ae018-0xa97bde57] usable ==> usable
[    0.000000] e820: update [mem 0xa979c018-0xa97ad857] usable ==> usable
[    0.000000] e820: update [mem 0xa979c018-0xa97ad857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a979c017] usable
[    0.000000] reserve setup_data: [mem 0x00000000a979c018-0x00000000a97ad857] usable
[    0.000000] reserve setup_data: [mem 0x00000000a97ad858-0x00000000a97ae017] usable
[    0.000000] reserve setup_data: [mem 0x00000000a97ae018-0x00000000a97bde57] usable
[    0.000000] reserve setup_data: [mem 0x00000000a97bde58-0x00000000e4b96fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e4b97000-0x00000000e5672fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e5673000-0x00000000e569dfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000e569e000-0x00000000e57b1fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000e57b2000-0x00000000e5b29fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e5b2a000-0x00000000e6ffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e7000000-0x00000000e7ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe700000-0x00000000fe7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000111ffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000112000000-0x0000000116ffffff] reserved
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  TPMFinalLog=0xe5772000  ACPI 2.0=0xe567b000  ACPI=0xe567b000  SMBIOS=0xe59d2000  SMBIOS 3.0=0xe59d1000  ESRT=0xe3f95a98  MEMATTR=0xe37ea018  TPMEventLog=0xa97be018
[    0.000000] Kernel is locked down from EFI Secure Boot; see https://wiki.debian.org/SecureBoot
[    0.000000] secureboot: Secure boot enabled
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. E402BA/E402BA, BIOS E402BA.314 02/26/2020
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2495.416 MHz processor
[    0.000285] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000286] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000294] last_pfn = 0x112000 max_arch_pfn = 0x400000000
[    0.000300] MTRR default type: uncachable
[    0.000301] MTRR fixed ranges enabled:
[    0.000302]   00000-9FFFF write-back
[    0.000303]   A0000-BFFFF write-through
[    0.000304]   C0000-DFFFF uncachable
[    0.000305]   E0000-FFFFF write-protect
[    0.000305] MTRR variable ranges enabled:
[    0.000307]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000308]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000310]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000310]   3 base 0000E0000000 mask FFFFF8000000 write-back
[    0.000311]   4 base 0000E7000000 mask FFFFFF000000 uncachable
[    0.000312]   5 disabled
[    0.000313]   6 disabled
[    0.000313]   7 disabled
[    0.000314] TOM2: 0000000117000000 aka 4464M
[    0.000589] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000697] e820: update [mem 0xe7000000-0xffffffff] usable ==> reserved
[    0.000705] last_pfn = 0xe7000 max_arch_pfn = 0x400000000
[    0.005984] esrt: Reserving ESRT space from 0x00000000e3f95a98 to 0x00000000e3f95ad0.
[    0.005990] e820: update [mem 0xe3f95000-0xe3f95fff] usable ==> reserved
[    0.006006] Using GB pages for direct mapping
[    0.007099] RAMDISK: [mem 0x3a8b2000-0x3e4cbfff]
[    0.007110] ACPI: Early table checksum verification disabled
[    0.007114] ACPI: RSDP 0x00000000E567B000 000024 (v02 _ASUS_)
[    0.007118] ACPI: XSDT 0x00000000E567B098 0000AC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.007124] ACPI: FACP 0x00000000E5686DC8 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.007129] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200326/tbfadt-624)
[    0.007133] ACPI: DSDT 0x00000000E567B1D0 00BBF7 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[    0.007136] ACPI: FACS 0x00000000E576FF00 000040
[    0.007139] ACPI: APIC 0x00000000E5686EE0 00007E (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.007141] ACPI: FPDT 0x00000000E5686F60 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.007144] ACPI: FIDT 0x00000000E5686FA8 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.007147] ACPI: ECDT 0x00000000E5687048 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.007149] ACPI: MCFG 0x00000000E5687110 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
[    0.007151] ACPI: MSDM 0x00000000E5687150 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.007154] ACPI: HPET 0x00000000E56871A8 000038 (v01 _ASUS_ Notebook 01072009 AMI  00000005)
[    0.007156] ACPI: UEFI 0x00000000E56871E0 000042 (v01                 00000000      00000000)
[    0.007159] ACPI: IVRS 0x00000000E5687228 0000D0 (v02 AMD    AGESA    00000001 AMD  00000000)
[    0.007161] ACPI: VFCT 0x00000000E56872F8 00FE84 (v01 _ASUS_ Notebook 00000001 AMD  31504F47)
[    0.007164] ACPI: BGRT 0x00000000E5697180 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.007166] ACPI: TPM2 0x00000000E56971B8 000034 (v03 _ASUS_ Notebook 00000001 AMI  00000000)
[    0.007169] ACPI: SSDT 0x00000000E56971F0 0006B2 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.007171] ACPI: SSDT 0x00000000E56978A8 004B5B (v02 AMD    AGESA    00000002 MSFT 04000000)
[    0.007173] ACPI: CRAT 0x00000000E569C408 000310 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.007176] ACPI: SSDT 0x00000000E569C718 00165E (v01 AMD    CPMCMN   00000001 INTL 20120913)
[    0.007186] ACPI: Local APIC address 0xfee00000
[    0.007288] No NUMA configuration found
[    0.007289] Faking a node at [mem 0x0000000000000000-0x0000000111ffffff]
[    0.007294] NODE_DATA(0) allocated [mem 0x111ffb000-0x111ffffff]
[    0.007324] Zone ranges:
[    0.007325]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007326]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007327]   Normal   [mem 0x0000000100000000-0x0000000111ffffff]
[    0.007328]   Device   empty
[    0.007329] Movable zone start for each node
[    0.007330] Early memory node ranges
[    0.007331]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.007332]   node   0: [mem 0x0000000000100000-0x00000000e4b96fff]
[    0.007333]   node   0: [mem 0x00000000e5b2a000-0x00000000e6ffffff]
[    0.007334]   node   0: [mem 0x0000000100000000-0x0000000111ffffff]
[    0.007763] Zeroed struct page in unavailable ranges: 32756 pages
[    0.007765] Initmem setup node 0 [mem 0x0000000000001000-0x0000000111ffffff]
[    0.007767] On node 0 totalpages: 1015820
[    0.007769]   DMA zone: 64 pages used for memmap
[    0.007770]   DMA zone: 23 pages reserved
[    0.007771]   DMA zone: 3999 pages, LIFO batch:0
[    0.007848]   DMA32 zone: 14658 pages used for memmap
[    0.007848]   DMA32 zone: 938093 pages, LIFO batch:63
[    0.025623]   Normal zone: 1152 pages used for memmap
[    0.025625]   Normal zone: 73728 pages, LIFO batch:15
[    0.026331] ACPI: PM-Timer IO Port: 0x808
[    0.026334] ACPI: Local APIC address 0xfee00000
[    0.026341] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.026349] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.026352] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[    0.026354] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.026356] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.026357] ACPI: IRQ0 used by override.
[    0.026358] ACPI: IRQ9 used by override.
[    0.026360] Using ACPI (MADT) for SMP configuration information
[    0.026361] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.026370] e820: update [mem 0xe3777000-0xe37a5fff] usable ==> reserved
[    0.026383] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.026411] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.026413] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.026415] PM: hibernation: Registered nosave memory: [mem 0xa979c000-0xa979cfff]
[    0.026416] PM: hibernation: Registered nosave memory: [mem 0xa97ad000-0xa97adfff]
[    0.026417] PM: hibernation: Registered nosave memory: [mem 0xa97ae000-0xa97aefff]
[    0.026419] PM: hibernation: Registered nosave memory: [mem 0xa97bd000-0xa97bdfff]
[    0.026421] PM: hibernation: Registered nosave memory: [mem 0xe3777000-0xe37a5fff]
[    0.026423] PM: hibernation: Registered nosave memory: [mem 0xe3f95000-0xe3f95fff]
[    0.026424] PM: hibernation: Registered nosave memory: [mem 0xe4b97000-0xe5672fff]
[    0.026425] PM: hibernation: Registered nosave memory: [mem 0xe5673000-0xe569dfff]
[    0.026426] PM: hibernation: Registered nosave memory: [mem 0xe569e000-0xe57b1fff]
[    0.026426] PM: hibernation: Registered nosave memory: [mem 0xe57b2000-0xe5b29fff]
[    0.026428] PM: hibernation: Registered nosave memory: [mem 0xe7000000-0xe7ffffff]
[    0.026429] PM: hibernation: Registered nosave memory: [mem 0xe8000000-0xf7ffffff]
[    0.026429] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.026430] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfe6fffff]
[    0.026431] PM: hibernation: Registered nosave memory: [mem 0xfe700000-0xfe7fffff]
[    0.026431] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfeb7ffff]
[    0.026432] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.026432] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.026433] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.026434] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.026434] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.026435] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.026435] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.026436] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.026436] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.026437] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
[    0.026438] PM: hibernation: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
[    0.026438] PM: hibernation: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
[    0.026439] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
[    0.026439] PM: hibernation: Registered nosave memory: [mem 0xfedc9000-0xfedfffff]
[    0.026440] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.026441] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.026441] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.026443] [mem 0xe8000000-0xf7ffffff] available for PCI devices
[    0.026445] Booting paravirtualized kernel on bare hardware
[    0.026449] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.029988] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.030571] percpu: Embedded 55 pages/cpu s188056 r8192 d29032 u524288
[    0.030579] pcpu-alloc: s188056 r8192 d29032 u524288 alloc=1*2097152
[    0.030580] pcpu-alloc: [0] 0 1 2 3
[    0.030610] Built 1 zonelists, mobility grouping on.  Total pages: 999923
[    0.030611] Policy zone: Normal
[    0.030613] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.7.0-0.bpo.2-amd64 root=UUID=3bc719bc-b403-4282-ab3b-f9d6fd8ca814 ro acpi_osi=Linux quiet splash
[    0.031557] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.032009] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.032040] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.064790] Memory: 3740132K/4063280K available (10243K kernel code, 1272K rwdata, 4020K rodata, 1628K init, 1944K bss, 256972K reserved, 0K cma-reserved)
[    0.064944] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.064960] ftrace: allocating 34999 entries in 137 pages
[    0.081820] ftrace: allocated 137 pages with 3 groups
[    0.081939] rcu: Hierarchical RCU implementation.
[    0.081940] rcu:   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.081942] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.081943] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.086152] NR_IRQS: 33024, nr_irqs: 1000, preallocated irqs: 16
[    0.086474] random: crng done (trusting CPU's manufacturer)
[    0.086507] Console: colour dummy device 80x25
[    0.086514] printk: console [tty0] enabled
[    0.086541] ACPI: Core revision 20200326
[    0.086745] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.086760] APIC: Switch to symmetric I/O mode setup
[    0.087927] AMD-Vi: Disable IOMMU on Stoney Ridge
[    0.088433] AMD-Vi: AMD IOMMU disabled
[    0.088866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.106761] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f84f85ce1, max_idle_ns: 440795273801 ns
[    0.106768] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.83 BogoMIPS (lpj=9981664)
[    0.106770] pid_max: default: 32768 minimum: 301
[    0.109049] LSM: Security Framework initializing
[    0.109059] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.109087] AppArmor: AppArmor initialized
[    0.109089] TOMOYO Linux initialized
[    0.109122] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.109136] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.109419] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[    0.109478] LVT offset 1 assigned for vector 0xf9
[    0.109486] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.109487] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.109492] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.109494] Spectre V2 : Mitigation: Full AMD retpoline
[    0.109495] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.109496] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.109498] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.109694] Freeing SMP alternatives memory: 32K
[    0.220743] smpboot: CPU0: AMD A6-9220 RADEON R4, 5 COMPUTE CORES 2C+3G (family: 0x15, model: 0x70, stepping: 0x0)
[    0.220922] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.220927] ... version:                0
[    0.220928] ... bit width:              48
[    0.220928] ... generic registers:      6
[    0.220929] ... value mask:             0000ffffffffffff
[    0.220929] ... max period:             00007fffffffffff
[    0.220930] ... fixed-purpose events:   0
[    0.220930] ... event mask:             000000000000003f
[    0.220975] rcu: Hierarchical SRCU implementation.
[    0.221404] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.221478] smp: Bringing up secondary CPUs ...
[    0.221596] x86: Booting SMP configuration:
[    0.221597] .... node  #0, CPUs:      #1
[    0.222764] smp: Brought up 1 node, 2 CPUs
[    0.222764] smpboot: Max logical packages: 2
[    0.222764] smpboot: Total of 2 processors activated (9981.66 BogoMIPS)
[    0.222786] node 0 initialised, 16544 pages in 4ms
[    0.223004] devtmpfs: initialized
[    0.223004] x86/mm: Memory block size: 128MB
[    0.223312] PM: Registering ACPI NVS region [mem 0xe569e000-0xe57b1fff] (1130496 bytes)
[    0.223312] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.223312] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.223312] pinctrl core: initialized pinctrl subsystem
[    0.223312] thermal_sys: Registered thermal governor 'fair_share'
[    0.223312] thermal_sys: Registered thermal governor 'bang_bang'
[    0.223312] thermal_sys: Registered thermal governor 'step_wise'
[    0.223312] thermal_sys: Registered thermal governor 'user_space'
[    0.223312] NET: Registered protocol family 16
[    0.223312] audit: initializing netlink subsys (disabled)
[    0.223312] audit: type=2000 audit(1601565975.136:1): state=initialized audit_enabled=0 res=1
[    0.223312] cpuidle: using governor ladder
[    0.223312] cpuidle: using governor menu
[    0.223312] ACPI: bus type PCI registered
[    0.223312] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.223312] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.223312] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.223312] PCI: Using configuration type 1 for base access
[    0.224093] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.224093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.399140] ACPI: Added _OSI(Module Device)
[    0.399140] ACPI: Added _OSI(Processor Device)
[    0.399140] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.399140] ACPI: Added _OSI(Processor Aggregator Device)
[    0.399140] ACPI: Added _OSI(Linux-Dell-Video)
[    0.399140] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.399140] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.399140] ACPI: Added _OSI(Linux)
[    0.410792] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.411693] ACPI: EC: EC started
[    0.411694] ACPI: EC: interrupt blocked
[    0.412425] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.412426] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.413612] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline
[    0.415749] ACPI: Interpreter enabled
[    0.415774] ACPI: (supports S0 S3 S4 S5)
[    0.415776] ACPI: Using IOAPIC for interrupt routing
[    0.415804] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.416057] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.417948] ACPI: Power Resource [P0SD] (off)
[    0.417981] ACPI: Power Resource [P3SD] (off)
[    0.418077] ACPI: Power Resource [P0U2] (off)
[    0.418106] ACPI: Power Resource [P3U2] (off)
[    0.418825] ACPI: Power Resource [P0U3] (off)
[    0.418855] ACPI: Power Resource [P3U3] (off)
[    0.419224] ACPI: Power Resource [P0ST] (on)
[    0.419253] ACPI: Power Resource [P3ST] (on)
[    0.422114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.422120] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.422272] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.422412] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.422430] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.422690] PCI host bridge to bus 0000:00
[    0.422693] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.422694] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.422695] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.422697] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.422698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.422699] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.422700] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xfed3ffff window]
[    0.422701] pci_bus 0000:00: root bus resource [mem 0xfedca000-0xffffffff window]
[    0.422703] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.422712] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[    0.422823] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[    0.422932] pci 0000:00:01.0: [1002:98e4] type 00 class 0x030000
[    0.422949] pci 0000:00:01.0: reg 0x10: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.422956] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.422961] pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.422966] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[    0.422971] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[    0.422976] pci 0000:00:01.0: enabling Extended Tags
[    0.422984] pci 0000:00:01.0: BAR 0: assigned to efifb
[    0.423014] pci 0000:00:01.0: supports D1 D2
[    0.423015] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.423109] pci 0000:00:01.1: [1002:15b3] type 00 class 0x040300
[    0.423122] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[    0.423140] pci 0000:00:01.1: enabling Extended Tags
[    0.423168] pci 0000:00:01.1: supports D1 D2
[    0.423227] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[    0.423301] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
[    0.423337] pci 0000:00:02.2: enabling Extended Tags
[    0.423377] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.423464] pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
[    0.423500] pci 0000:00:02.3: enabling Extended Tags
[    0.423538] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    0.423624] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[    0.423707] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[    0.423719] pci 0000:00:08.0: reg 0x10: [mem 0xf0800000-0xf081ffff 64bit pref]
[    0.423723] pci 0000:00:08.0: reg 0x18: [mem 0xfe800000-0xfe8fffff]
[    0.423727] pci 0000:00:08.0: reg 0x1c: [mem 0xfeb70000-0xfeb70fff]
[    0.423735] pci 0000:00:08.0: reg 0x24: [mem 0xfeb6a000-0xfeb6bfff]
[    0.423816] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[    0.423887] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[    0.423896] pci 0000:00:09.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff]
[    0.423925] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[    0.424012] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[    0.424038] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[    0.424141] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.424235] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[    0.424253] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.424261] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.424269] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.424276] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.424284] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.424292] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff]
[    0.424327] pci 0000:00:11.0: PME# supported from D3hot
[    0.424403] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[    0.424421] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
[    0.424489] pci 0000:00:12.0: supports D1 D2
[    0.424490] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.424563] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.424689] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.424818] pci 0000:00:14.7: [1022:7906] type 00 class 0x080501
[    0.424838] pci 0000:00:14.7: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff 64bit]
[    0.424892] pci 0000:00:14.7: PME# supported from D3cold
[    0.424963] pci 0000:00:18.0: [1022:15b0] type 00 class 0x060000
[    0.425022] pci 0000:00:18.1: [1022:15b1] type 00 class 0x060000
[    0.425077] pci 0000:00:18.2: [1022:15b2] type 00 class 0x060000
[    0.425142] pci 0000:00:18.3: [1022:15b3] type 00 class 0x060000
[    0.425201] pci 0000:00:18.4: [1022:15b4] type 00 class 0x060000
[    0.425255] pci 0000:00:18.5: [1022:15b5] type 00 class 0x060000
[    0.425373] pci 0000:01:00.0: [168c:0036] type 00 class 0x028000
[    0.425399] pci 0000:01:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit]
[    0.425429] pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref]
[    0.425493] pci 0000:01:00.0: supports D1 D2
[    0.425494] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.425601] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.425607] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.425682] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.425713] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.425740] pci 0000:02:00.0: reg 0x18: [mem 0xfe904000-0xfe904fff 64bit]
[    0.425759] pci 0000:02:00.0: reg 0x20: [mem 0xfe900000-0xfe903fff 64bit]
[    0.425861] pci 0000:02:00.0: supports D1 D2
[    0.425862] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.426055] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.426059] pci 0000:00:02.3:   bridge window [io  0xe000-0xefff]
[    0.426062] pci 0000:00:02.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.426719] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.426778] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.426822] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.426871] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.426915] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.426952] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.426989] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.427026] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.427882] ACPI: EC: interrupt unblocked
[    0.427883] ACPI: EC: event unblocked
[    0.427888] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.427888] ACPI: EC: GPE=0x3
[    0.427890] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete
[    0.427891] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[    0.427959] iommu: Default domain type: Translated
[    0.427977] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.427977] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.427977] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.427977] vgaarb: loaded
[    0.427977] EDAC MC: Ver: 3.0.0
[    0.427977] Registered efivars operations
[    0.427977] PCI: Using ACPI for IRQ routing
[    0.428554] PCI: pci_cache_line_size set to 64 bytes
[    0.428599] Expanded resource Reserved due to conflict with AMD0020:01
[    0.428601] e820: reserve RAM buffer [mem 0xa979c018-0xabffffff]
[    0.428602] e820: reserve RAM buffer [mem 0xa97ae018-0xabffffff]
[    0.428603] e820: reserve RAM buffer [mem 0xe3777000-0xe3ffffff]
[    0.428604] e820: reserve RAM buffer [mem 0xe3f95000-0xe3ffffff]
[    0.428605] e820: reserve RAM buffer [mem 0xe4b97000-0xe7ffffff]
[    0.428606] e820: reserve RAM buffer [mem 0xe7000000-0xe7ffffff]
[    0.428607] e820: reserve RAM buffer [mem 0x112000000-0x113ffffff]
[    0.428729] NetLabel: Initializing
[    0.428730] NetLabel:  domain hash size = 128
[    0.428731] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.428745] NetLabel:  unlabeled traffic allowed by default
[    0.428779] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.428781] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.431796] clocksource: Switched to clocksource tsc-early
[    0.444401] VFS: Disk quotas dquot_6.6.0
[    0.444420] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.444570] AppArmor: AppArmor Filesystem Enabled
[    0.444591] pnp: PnP ACPI init
[    0.444756] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.444763] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.444827] system 00:01: [mem 0xe3000000-0xe7ffffff] could not be reserved
[    0.444831] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.444895] system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved
[    0.444899] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.444959] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.445034] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.445097] pnp 00:05: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.445286] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.445287] system 00:06: [io  0x040b] has been reserved
[    0.445289] system 00:06: [io  0x04d6] has been reserved
[    0.445290] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.445291] system 00:06: [io  0x0c14] has been reserved
[    0.445293] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.445294] system 00:06: [io  0x0c52] has been reserved
[    0.445295] system 00:06: [io  0x0c6c] has been reserved
[    0.445296] system 00:06: [io  0x0c6f] has been reserved
[    0.445297] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
[    0.445299] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
[    0.445300] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
[    0.445301] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
[    0.445302] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.445303] system 00:06: [io  0x0800-0x089f] has been reserved
[    0.445305] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.445306] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.445308] system 00:06: [io  0xfe00-0xfefe] has been reserved
[    0.445310] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.445311] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.445312] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.445314] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.445315] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.445317] system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.445318] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.445319] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.445323] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.445941] pnp: PnP ACPI: found 7 devices
[    0.451974] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.452027] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.452032] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.452038] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.452040] pci 0000:00:02.3:   bridge window [io  0xe000-0xefff]
[    0.452044] pci 0000:00:02.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.452051] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.452053] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.452054] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.452055] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.452057] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.452058] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.452059] pci_bus 0000:00: resource 10 [mem 0xe8000000-0xfed3ffff window]
[    0.452060] pci_bus 0000:00: resource 11 [mem 0xfedca000-0xffffffff window]
[    0.452062] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.452063] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.452064] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.452157] NET: Registered protocol family 2
[    0.452317] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.452327] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.452388] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.452497] TCP: Hash tables configured (established 32768 bind 32768)
[    0.452554] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.452571] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.452686] NET: Registered protocol family 1
[    0.452694] NET: Registered protocol family 44
[    0.452708] pci 0000:00:01.0: disabling ATS
[    0.452715] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.452723] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[    0.452991] pci 0000:00:10.0: PME# does not work under D0, disabling it
[    0.453132] PCI: CLS 64 bytes, default 64
[    0.453207] Trying to unpack rootfs image as initramfs...
[    1.438802] Freeing initrd memory: 61544K
[    1.438842] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.438844] software IO TLB: mapped [mem 0xde176000-0xe2176000] (64MB)
[    1.438881] LVT offset 0 assigned for vector 0x400
[    1.438993] perf: AMD IBS detected (0x000007ff)
[    1.439433] Initialise system trusted keyrings
[    1.439444] Key type blacklist registered
[    1.439512] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.440932] zbud: loaded
[    1.441114] integrity: Platform Keyring initialized
[    1.441117] Key type asymmetric registered
[    1.441118] Asymmetric key parser 'x509' registered
[    1.441128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.441194] io scheduler mq-deadline registered
[    1.441834] pcieport 0000:00:02.2: PME: Signaling with IRQ 25
[    1.441982] pcieport 0000:00:02.3: PME: Signaling with IRQ 26
[    1.442078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.442095] efifb: probing for efifb
[    1.442108] efifb: framebuffer at 0xe8000000, using 1952k, total 1950k
[    1.442109] efifb: mode is 800x600x32, linelength=3328, pages=1
[    1.442109] efifb: scrolling: redraw
[    1.442111] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.442202] Console: switching to colour frame buffer device 100x37
[    1.443367] fb0: EFI VGA frame buffer device
[    1.443405] ACPI: \_PR_.P000: Found 2 idle states
[    1.443491] ACPI: \_PR_.P001: Found 2 idle states
[    1.444305] thermal LNXTHERM:00: registered as thermal_zone0
[    1.444306] ACPI: Thermal Zone [THRM] (55 C)
[    1.444429] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.444879] AMD0020:00: ttyS0 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A
[    1.445489] AMD0020:01: ttyS1 at MMIO 0xfedc8000 (irq = 11, base_baud = 3000000) is a 16550A
[    1.446052] Linux agpgart interface v0.103
[    1.446095] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.446096] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.446242] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.449721] i8042: Detected active multiplexing controller, rev 1.1
[    1.450832] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.450837] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.450863] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.450884] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.450905] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.451010] mousedev: PS/2 mouse device common for all mice
[    1.451052] rtc_cmos 00:03: RTC can wake from S4
[    1.451208] rtc_cmos 00:03: registered as rtc0
[    1.451234] rtc_cmos 00:03: setting system clock to 2020-10-01T15:26:16 UTC (1601565976)
[    1.451252] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.451279] ledtrig-cpu: registered to indicate activity on CPUs
[    1.451376] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[    1.451567] NET: Registered protocol family 10
[    1.460689] Segment Routing with IPv6
[    1.460721] mip6: Mobile IPv6
[    1.460724] NET: Registered protocol family 17
[    1.460761] mpls_gso: MPLS GSO support
[    1.460939] microcode: CPU0: patch_level=0x06006705
[    1.460945] microcode: CPU1: patch_level=0x06006705
[    1.460949] microcode: Microcode Update Driver: v2.2.
[    1.460955] IPI shorthand broadcast: enabled
[    1.460962] sched_clock: Marking stable (1460449175, 424737)->(1464455831, -3581919)
[    1.461054] registered taskstats version 1
[    1.461057] Loading compiled-in X.509 certificates
[    1.489902] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.502239] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.502257] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    1.502280] zswap: loaded using pool lzo/zbud
[    1.502411] Key type ._fscrypt registered
[    1.502412] Key type .fscrypt registered
[    1.502413] Key type fscrypt-provisioning registered
[    1.502454] AppArmor: AppArmor sha1 policy hashing enabled
[    1.503296] integrity: Loading X.509 certificate: UEFI:db
[    1.503544] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    1.503545] integrity: Loading X.509 certificate: UEFI:db
[    1.503789] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    1.503789] integrity: Loading X.509 certificate: UEFI:db
[    1.503814] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.503815] integrity: Loading X.509 certificate: UEFI:db
[    1.503835] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.503835] integrity: Loading X.509 certificate: UEFI:db
[    1.504080] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    1.505842] Lockdown: swapper/0: hibernation is restricted; see https://wiki.debian.org/SecureBoot
[    1.507599] Freeing unused kernel image (initmem) memory: 1628K
[    1.523037] Write protecting the kernel read-only data: 16384k
[    1.523762] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    1.523809] Freeing unused kernel image (rodata/data gap) memory: 76K
[    1.565873] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.565876] Run /init as init process
[    1.565877]   with arguments:
[    1.565878]     /init
[    1.565879]     splash
[    1.565879]   with environment:
[    1.565880]     HOME=/
[    1.565880]     TERM=linux
[    1.565881]     BOOT_IMAGE=/boot/vmlinuz-5.7.0-0.bpo.2-amd64
[    1.630652] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0e/PNP0C09:00/PNP0C0D:00/input/input4
[    1.630681] ACPI: Lid Switch [LID]
[    1.630762] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    1.630827] ACPI: Power Button [PWRB]
[    1.630876] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[    1.630895] ACPI: Sleep Button [SLPB]
[    1.630940] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    1.630979] ACPI: Power Button [PWRF]
[    1.643630] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.651857] ACPI BIOS Error (bug): Could not resolve symbol [^^^PB2.VGA.AFN7], AE_NOT_FOUND (20200326/psargs-330)
[    1.651925] ACPI Error: Aborting method \_SB.PCI0.VGA.LCDD._BCM due to previous error (AE_NOT_FOUND) (20200326/psparse-531)
[    1.651984] ACPI Error: Evaluating _BCM failed (20200326/video-357)
[    1.652117] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    1.692344] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    1.692347] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    1.692415] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    1.705014] SCSI subsystem initialized
[    1.727654] ACPI: bus type USB registered
[    1.727680] usbcore: registered new interface driver usbfs
[    1.727688] usbcore: registered new interface driver hub
[    1.728119] usbcore: registered new device driver usb
[    1.743232] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.744431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.748110] sdhci: Secure Digital Host Controller Interface driver
[    1.748112] sdhci: Copyright(c) Pierre Ossman
[    1.749636] ehci-pci: EHCI PCI platform driver
[    1.749835] ehci-pci 0000:00:12.0: EHCI Host Controller
[    1.749843] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[    1.749857] ehci-pci 0000:00:12.0: debug port 2
[    1.749899] ehci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000
[    1.752328] libphy: r8169: probed
[    1.752559] r8169 0000:02:00.0 eth0: RTL8168gu/8111gu, b0:6e:bf:15:78:d9, XID 509, IRQ 28
[    1.752561] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.760388] libata version 3.00 loaded.
[    1.762800] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[    1.762931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[    1.762933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.762935] usb usb1: Product: EHCI Host Controller
[    1.762936] usb usb1: Manufacturer: Linux 5.7.0-0.bpo.2-amd64 ehci_hcd
[    1.762937] usb usb1: SerialNumber: 0000:00:12.0
[    1.763100] hub 1-0:1.0: USB hub found
[    1.763109] hub 1-0:1.0: 2 ports detected
[    1.767740] ahci 0000:00:11.0: version 3.0
[    1.768093] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.768097] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[    1.769486] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1)
[    1.769495] sdhci-pci 0000:00:14.7: enabling device (0000 -> 0002)
[    1.774307] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.774317] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.774502] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[    1.787082] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.788559] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[    1.788561] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.788563] usb usb2: Product: xHCI Host Controller
[    1.788564] usb usb2: Manufacturer: Linux 5.7.0-0.bpo.2-amd64 xhci-hcd
[    1.788565] usb usb2: SerialNumber: 0000:00:10.0
[    1.788915] hub 2-0:1.0: USB hub found
[    1.789594] hub 2-0:1.0: 4 ports detected
[    1.791544] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.791555] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    1.791560] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[    1.791935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.791966] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[    1.791968] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.791969] usb usb3: Product: xHCI Host Controller
[    1.791970] usb usb3: Manufacturer: Linux 5.7.0-0.bpo.2-amd64 xhci-hcd
[    1.791972] usb usb3: SerialNumber: 0000:00:10.0
[    1.792336] hub 3-0:1.0: USB hub found
[    1.792536] hub 3-0:1.0: 4 ports detected
[    1.796693] scsi host0: ahci
[    1.796816] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 19
[    1.847008] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[    1.872031] input: FocalTechPS/2 FocalTech Touchpad as /devices/platform/i8042/serio4/input/input13
[    1.973615] [drm] amdgpu kernel modesetting enabled.
[    1.973703] Parsing CRAT table with 1 nodes
[    1.973708] Creating topology SYSFS entries
[    1.973725] Topology: Add APU node [0x0:0x0]
[    1.973726] Finished initializing topology
[    1.973793] checking generic (e8000000 1e8000) vs hw (e8000000 8000000)
[    1.973794] fb0: switching to amdgpudrmfb from EFI VGA
[    1.973876] Console: switching to colour dummy device 80x25
[    1.973928] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[    1.974136] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x1043:0x1680 0xEA).
[    1.974156] [drm] register mmio base: 0xFEB00000
[    1.974156] [drm] register mmio size: 262144
[    1.974162] [drm] add ip block number 0 <vi_common>
[    1.974163] [drm] add ip block number 1 <gmc_v8_0>
[    1.974164] [drm] add ip block number 2 <cz_ih>
[    1.974165] [drm] add ip block number 3 <gfx_v8_0>
[    1.974166] [drm] add ip block number 4 <sdma_v3_0>
[    1.974167] [drm] add ip block number 5 <powerplay>
[    1.974168] [drm] add ip block number 6 <dm>
[    1.974169] [drm] add ip block number 7 <uvd_v6_0>
[    1.974170] [drm] add ip block number 8 <vce_v3_0>
[    1.974171] [drm] add ip block number 9 <acp_ip>
[    1.974174] kfd kfd: STONEY  not supported in kfd
[    1.974208] ATOM BIOS: SWBRT01116.001
[    1.974229] [drm] UVD is enabled in physical mode
[    1.974231] [drm] VCE enabled in VM mode
[    1.974261] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    1.974268] amdgpu 0000:00:01.0: VRAM: 80M 0x000000F400000000 - 0x000000F404FFFFFF (80M used)
[    1.974270] amdgpu 0000:00:01.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[    1.974275] [drm] Detected VRAM RAM=80M, BAR=80M
[    1.974276] [drm] RAM width 64bits UNKNOWN
[    1.974362] [TTM] Zone  kernel: Available graphics memory: 1951706 KiB
[    1.974363] [TTM] Initializing pool allocator
[    1.974368] [TTM] Initializing DMA pool allocator
[    1.974406] [drm] amdgpu: 80M of VRAM memory ready
[    1.974408] [drm] amdgpu: 2858M of GTT memory ready.
[    1.974411] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.974442] [drm] PCIE GART of 1024M enabled (table at 0x000000F4001D5000).
[    1.974552] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_pfp.bin
[    1.974573] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_me.bin
[    1.974589] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_ce.bin
[    1.974608] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_rlc.bin
[    1.974719] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_mec.bin
[    1.975616] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_sdma.bin
[    1.975705] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu8_smu
[    1.975869] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_uvd.bin
[    1.975873] [drm] Found UVD firmware Version: 1.43 Family ID: 15
[    1.975878] [drm] UVD ENC is disabled
[    1.976189] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_vce.bin
[    1.976194] [drm] Found VCE firmware Version: 52.0 Binary ID: 3
[    1.976640] smu version 26.16.00
[    2.005013] [drm] DM_PPLIB: values for Engine clock
[    2.005015] [drm] DM_PPLIB:   200000
[    2.005015] [drm] DM_PPLIB:   300000
[    2.005016] [drm] DM_PPLIB:   400000
[    2.005016] [drm] DM_PPLIB:   464520
[    2.005016] [drm] DM_PPLIB:   514290
[    2.005017] [drm] DM_PPLIB:   576000
[    2.005017] [drm] DM_PPLIB:   626090
[    2.005018] [drm] DM_PPLIB:   654550
[    2.005019] [drm] DM_PPLIB: Validation clocks:
[    2.005020] [drm] DM_PPLIB:    engine_max_clock: 65455
[    2.005020] [drm] DM_PPLIB:    memory_max_clock: 80000
[    2.005020] [drm] DM_PPLIB:    level           : 8
[    2.005022] [drm] DM_PPLIB: values for Display clock
[    2.005022] [drm] DM_PPLIB:   300000
[    2.005023] [drm] DM_PPLIB:   400000
[    2.005023] [drm] DM_PPLIB:   496560
[    2.005024] [drm] DM_PPLIB:   626090
[    2.005024] [drm] DM_PPLIB:   685720
[    2.005024] [drm] DM_PPLIB:   757900
[    2.005025] [drm] DM_PPLIB:   800000
[    2.005025] [drm] DM_PPLIB:   847060
[    2.005026] [drm] DM_PPLIB: Validation clocks:
[    2.005026] [drm] DM_PPLIB:    engine_max_clock: 65455
[    2.005027] [drm] DM_PPLIB:    memory_max_clock: 80000
[    2.005027] [drm] DM_PPLIB:    level           : 8
[    2.005028] [drm] DM_PPLIB: values for Memory clock
[    2.005028] [drm] DM_PPLIB:   333000
[    2.005029] [drm] DM_PPLIB:   800000
[    2.005029] [drm] DM_PPLIB: Validation clocks:
[    2.005030] [drm] DM_PPLIB:    engine_max_clock: 65455
[    2.005030] [drm] DM_PPLIB:    memory_max_clock: 80000
[    2.005030] [drm] DM_PPLIB:    level           : 8
[    2.005109] [drm] Display Core initialized with v3.2.76!
[    2.037583] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.063520] [drm] UVD initialized successfully.
[    2.163676] [drm] VCE initialized successfully.
[    2.166007] [drm] fb mappable at 0x112643000
[    2.166008] [drm] vram apper at 0x112000000
[    2.166009] [drm] size 8294400
[    2.166010] [drm] fb depth is 24
[    2.166010] [drm]    pitch is 7680
[    2.166115] fbcon: amdgpudrmfb (fb0) is primary device
[    2.183357] Console: switching to colour frame buffer device 240x67
[    2.204684] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[    2.219803] [drm] Initialized amdgpu 3.37.0 20150101 for 0000:00:01.0 on minor 0
[    2.222799] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.270980] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.379437] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[    2.379440] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.379741] hub 1-1:1.0: USB hub found
[    2.379805] hub 1-1:1.0: 4 ports detected
[    2.397309] ata1.00: ATA-10: ST1000LM035-1RK172, SDM1, max UDMA/133
[    2.397312] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.447194] ata1.00: configured for UDMA/133
[    2.447343] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 SDM1 PQ: 0 ANSI: 5
[    2.453544] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.453547] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.453558] sd 0:0:0:0: [sda] Write Protect is off
[    2.453560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.453578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.454955] tsc: Refined TSC clocksource calibration: 2495.317 MHz
[    2.454963] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7f206bf1, max_idle_ns: 440795322908 ns
[    2.454978] clocksource: Switched to clocksource tsc
[    2.525444]  sda: sda1 sda2 sda3
[    2.525909] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.666962] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.778502] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[    2.778505] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.778506] usb 1-1.1: Product: USB Receiver
[    2.778507] usb 1-1.1: Manufacturer: Logitech
[    2.785193] hid: raw HID events driver (C) Jiri Kosina
[    2.791906] usbcore: registered new interface driver usbhid
[    2.791908] usbhid: USB HID core driver
[    2.793876] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0001/input/input14
[    2.794007] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input0
[    2.794253] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/input/input15
[    2.851233] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input1
[    2.858961] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[    2.867241] logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input0
[    2.943409] logitech-djreceiver 0003:046D:C52F.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input1
[    2.968673] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=3490, bcdDevice= 0.01
[    2.968676] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.006106] logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD step 4 DJ (0x04) connected on slot 1
[    3.006553] input: Logitech Wireless Mouse PID:4008 Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input18
[    3.006647] input: Logitech Wireless Mouse PID:4008 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input19
[    3.006687] hid-generic 0003:046D:4008.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4008] on usb-0000:00:12.0-1.1/input1:1
[    3.046959] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[    3.054482] input: Logitech M185 as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input23
[    3.054573] logitech-hidpp-device 0003:046D:4008.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech M185] on usb-0000:00:12.0-1.1/input1:1
[    3.197574] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=5a01, bcdDevice=16.08
[    3.197577] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.197579] usb 1-1.3: Product: USB2.0 VGA UVC WebCam
[    3.197580] usb 1-1.3: Manufacturer: Azurewave
[    3.197581] usb 1-1.3: SerialNumber: 0x0001
[    3.606772] raid6: avx2x4   gen() 11348 MB/s
[    3.674777] raid6: avx2x4   xor()  3376 MB/s
[    3.742774] raid6: avx2x2   gen() 10279 MB/s
[    3.810772] raid6: avx2x2   xor()  7164 MB/s
[    3.878771] raid6: avx2x1   gen() 11370 MB/s
[    3.946771] raid6: avx2x1   xor()  6537 MB/s
[    4.014774] raid6: sse2x4   gen()  8837 MB/s
[    4.082772] raid6: sse2x4   xor()  3376 MB/s
[    4.150774] raid6: sse2x2   gen() 10442 MB/s
[    4.218779] raid6: sse2x2   xor()  6497 MB/s
[    4.286773] raid6: sse2x1   gen()  8010 MB/s
[    4.354771] raid6: sse2x1   xor()  5526 MB/s
[    4.354774] raid6: using algorithm avx2x1 gen() 11370 MB/s
[    4.354774] raid6: .... xor() 6537 MB/s, rmw enabled
[    4.354776] raid6: using avx2x2 recovery algorithm
[    4.363287] xor: automatically using best checksumming function   avx      
[    4.427649] Btrfs loaded, crc32c=crc32c-intel
[    4.601733] process '/usr/bin/fstype' started with executable stack
[    4.749858] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    5.151023] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    5.975869] systemd[1]: Inserted module 'autofs4'
[    6.122342] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.139146] systemd[1]: Detected architecture x86-64.
[    6.170124] systemd[1]: Set hostname to <debian>.
[    6.182428] Lockdown: systemd: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot
[    6.806401] systemd[1]: /lib/systemd/system/systemd-swap.service:21: Unknown lvalue 'ProtectClock' in section 'Service', ignoring
[    6.806418] systemd[1]: /lib/systemd/system/systemd-swap.service:24: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring
[    6.806424] systemd[1]: /lib/systemd/system/systemd-swap.service:25: Unknown lvalue 'ProtectKernelLogs' in section 'Service', ignoring
[    6.806435] systemd[1]: /lib/systemd/system/systemd-swap.service:28: Unknown lvalue 'RestrictSUIDSGID' in section 'Service', ignoring
[    6.835584] systemd[1]: /etc/systemd/system/anydesk.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
[    6.859037] systemd[1]: Listening on Journal Audit Socket.
[    6.859907] systemd[1]: Created slice system-getty.slice.
[    7.231478] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    7.248711] lp: driver loaded but no devices found
[    7.256410] systemd-journald[208]: Received request to flush runtime journal from PID 1
[    7.270966] ppdev: user-space parallel port driver
[    7.932188] acpi_cpufreq: overriding BIOS provided _PSD data
[    8.187652] EFI Variables Facility v0.08 2004-May-17
[    8.203365] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xe57aa000-0xe57aafff flags 0x200] vs e57aa000 4000
[    8.203371] tpm_crb MSFT0101:00: can't request region for resource [mem 0xe57aa000-0xe57aafff]
[    8.203380] tpm_crb: probe of MSFT0101:00 failed with error -16
[    8.221627] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    8.221736] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    8.221741] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    8.239336] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input24
[    8.248289] pstore: Using crash dump compression: deflate
[    8.248304] pstore: Registered efi as persistent store backend
[    8.268669] ACPI: AC Adapter [AC0] (on-line)
[    8.289931] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.373938] asus_wmi: ASUS WMI generic driver loaded
[    8.418633] cryptd: max_cpu_qlen set to 1000
[    8.472990] asus_wmi: Initialization: 0x1
[    8.473036] asus_wmi: BIOS WMI version: 9.0
[    8.473065] asus_wmi: SFUN value: 0x21
[    8.473069] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[    8.473070] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[    8.474112] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input25
[    8.478745] battery: new extension: ASUS Battery Extension
[    8.550244] AVX2 version of gcm_enc/dec engaged.
[    8.550246] AES CTR mode by8 optimization enabled
[    8.550549] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.550880] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    8.551163] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    8.551411] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.823124] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[    8.823266] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[    8.824173] snd_hda_intel 0000:00:09.2: enabling device (0004 -> 0006)
[    8.875910] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    8.910356] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    8.966930] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    8.972482] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input26
[    9.125951] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[    9.127049] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    9.127052] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.127054] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    9.127056] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[    9.127057] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[    9.127059] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[    9.127061] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[    9.142074] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input27
[    9.144292] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input28
[    9.148666] kvm: Nested Virtualization enabled
[    9.148670] SVM: kvm: Nested Paging enabled
[    9.148671] SVM: Virtual VMLOAD VMSAVE supported
[    9.148672] SVM: Virtual GIF supported
[    9.269618] MCE: In-kernel MCE decoding enabled.
[    9.514687] ath9k 0000:01:00.0: enabling device (0000 -> 0002)
[    9.515478] ath: phy0: Set BT/WLAN RX diversity capability
[    9.522680] ath: phy0: Enable LNA combining
[    9.523857] ath: EEPROM regdomain: 0x6a
[    9.523860] ath: EEPROM indicates we should expect a direct regpair map
[    9.523862] ath: Country alpha2 being used: 00
[    9.523863] ath: Regpair used: 0x6a
[    9.525063] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.525795] ieee80211 phy0: Atheros AR9565 Rev:2 mem=0xffffa23d01000000, irq=37
[    9.658399] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[   10.699331] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   10.806611] mc: Linux media interface: v0.10
[   10.875900] Bluetooth: Core ver 2.22
[   10.875937] NET: Registered protocol family 31
[   10.875937] Bluetooth: HCI device and connection manager initialized
[   10.876446] Bluetooth: HCI socket layer initialized
[   10.876450] Bluetooth: L2CAP socket layer initialized
[   10.876454] Bluetooth: SCO socket layer initialized
[   10.882386] videodev: Linux video capture interface: v2.00
[   11.089714] usbcore: registered new interface driver btusb
[   11.096092] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (13d3:5a01)
[   11.103338] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[   11.103342] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[   11.103344] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   11.103446] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input29
[   11.104036] usbcore: registered new interface driver uvcvideo
[   11.104039] USB Video Class driver (1.1.1)
[   11.133403] usb 1-1.2: firmware: direct-loading firmware ar3k/AthrBT_0x31010100.dfu
[   11.177595] usb 1-1.2: firmware: direct-loading firmware ar3k/ramps_0x31010100_40.dfu
[   11.183585] usbcore: registered new interface driver ath3k
[   11.222140] usb 1-1.2: USB disconnect, device number 4
[   11.302373] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   11.446877] usb 1-1.2: new full-speed USB device number 6 using ehci-pci
[   11.668230] audit: type=1400 audit(1601565986.711:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=678 comm="apparmor_parser"
[   11.668238] audit: type=1400 audit(1601565986.711:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=678 comm="apparmor_parser"
[   11.675866] audit: type=1400 audit(1601565986.719:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=679 comm="apparmor_parser"
[   11.675871] audit: type=1400 audit(1601565986.719:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=679 comm="apparmor_parser"
[   11.675873] audit: type=1400 audit(1601565986.719:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=679 comm="apparmor_parser"
[   11.750208] audit: type=1400 audit(1601565986.791:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=683 comm="apparmor_parser"
[   11.806742] audit: type=1400 audit(1601565986.847:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=684 comm="apparmor_parser"
[   11.811830] audit: type=1400 audit(1601565986.855:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=680 comm="apparmor_parser"
[   11.811835] audit: type=1400 audit(1601565986.855:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=680 comm="apparmor_parser"
[   11.811837] audit: type=1400 audit(1601565986.855:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=680 comm="apparmor_parser"
[   14.056214] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.056217] Bluetooth: BNEP filters: protocol multicast
[   14.056224] Bluetooth: BNEP socket layer initialized
[   16.808410] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=3490, bcdDevice= 0.02
[   16.808417] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   17.946839] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[   17.946954] Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   18.067828] r8169 0000:02:00.0 enp2s0: Link is Down
[   21.470209] Lockdown: Xorg: raw io port access is restricted; see https://wiki.debian.org/SecureBoot
[   22.057560] wlp1s0: authenticate with 24:7f:20:ba:9d:48
[   22.071198] wlp1s0: send auth to 24:7f:20:ba:9d:48 (try 1/3)
[   22.073820] wlp1s0: authenticated
[   22.074804] wlp1s0: associate with 24:7f:20:ba:9d:48 (try 1/3)
[   22.080600] wlp1s0: RX AssocResp from 24:7f:20:ba:9d:48 (capab=0x431 status=0 aid=5)
[   22.080703] wlp1s0: associated
[   22.080790] ath: EEPROM regdomain: 0x80fa
[   22.080791] ath: EEPROM indicates we should expect a country code
[   22.080792] ath: doing EEPROM country->regdmn map search
[   22.080793] ath: country maps to regdmn code: 0x37
[   22.080794] ath: Country alpha2 being used: FR
[   22.080794] ath: Regpair used: 0x37
[   22.080796] ath: regdomain 0x80fa dynamically updated by country element
[   22.263940] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   26.924628] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53021 DF PROTO=UDP SPT=50421 DPT=50001 LEN=157
[   26.925548] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53022 DF PROTO=UDP SPT=56030 DPT=50001 LEN=157
[   26.928667] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53023 DF PROTO=UDP SPT=58450 DPT=50002 LEN=157
[   26.928931] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53024 DF PROTO=UDP SPT=40478 DPT=50002 LEN=157
[   26.931474] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53025 DF PROTO=UDP SPT=60194 DPT=50003 LEN=157
[   26.931642] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53026 DF PROTO=UDP SPT=56517 DPT=50003 LEN=157
[   27.018824] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1.  Priority:50 extents:10 across:2490364k FS
[   27.646988] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   27.734142] ata1.00: configured for UDMA/133
[   27.935948] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53141 DF PROTO=UDP SPT=43990 DPT=50001 LEN=157
[   27.936019] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53142 DF PROTO=UDP SPT=60719 DPT=50001 LEN=157
[   27.939175] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53143 DF PROTO=UDP SPT=53871 DPT=50002 LEN=157
[   27.939785] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53144 DF PROTO=UDP SPT=43565 DPT=50002 LEN=157
[   32.226285] fuse: init (API version 7.31)
[   44.851579] Bluetooth: RFCOMM TTY layer initialized
[   44.851587] Bluetooth: RFCOMM socket layer initialized
[   44.851600] Bluetooth: RFCOMM ver 1.11
[   54.209568] logitech-hidpp-device 0003:046D:4008.0003: HID++ 2.0 device connected.
[   59.955702] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:24:7f:20:ba:9d:48:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[   99.889627] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:24:7f:20:ba:9d:48:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[  104.498093] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:24:7f:20:ba:9d:48:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
 

Hors ligne

#24 01-10-2020 17:32:20

Caribou22
CA Debian-Facile
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stable
Noyau : Sans pépins
(G)UI : Xfce, Gnome
Inscription : 10-11-2014
Site Web

Re : [Résolu] Installation DFLinux sur Asus E402B

Il me semble que Debian garde toujours 2 noyaux au minimum, donc autoremove doit conserver logiquement le 4.19 et le 5.7 pour le moment.

Quand tu recevras un nouveau noyau, le 4.19 sera automatiquement supprimé normalement wink

je ne m'y connais pas en analyse de logs de ce type et mise à jour de BIOS par contre hmm

Hors ligne

#25 02-10-2020 11:16:22

jarek
Membre
Lieu : Haute Loire
Distrib. : bullseye
Noyau : linux 5.8.0 amd64
(G)UI : Xfce4 - LightDM
Inscription : 24-06-2014

Re : [Résolu] Installation DFLinux sur Asus E402B

Ah, le AMD A6 est donc un processeur récent !

Mais pour les mises à jour bpo je ne crois pas que DFLinux le fasse tout seul.
A mon avis il faut les exécuter explicitement.

Le Diable a inventé l'Administration afin que les Hommes perdent tout espoir à jamais.
Ryzen3 3200G - Asrock B450

Hors ligne

Pied de page des forums