Mon ami a fait une mise à jour du Bios, ça peut toujours aider.
[ 0.000000] Linux version 5.7.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6), GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Debian 5.7.10-1~bpo10+1 (2020-07-30)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.7.0-0.bpo.2-amd64 root=UUID=3bc719bc-b403-4282-ab3b-f9d6fd8ca814 ro acpi_osi=Linux quiet splash
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x20b/0x2b0 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000e4b96fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e4b97000-0x00000000e5672fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e5673000-0x00000000e569dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e569e000-0x00000000e57b1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000e57b2000-0x00000000e5b29fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e5b2a000-0x00000000e6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e7000000-0x00000000e7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe700000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000111ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000112000000-0x0000000116ffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xa97ae018-0xa97bde57] usable ==> usable
[ 0.000000] e820: update [mem 0xa97ae018-0xa97bde57] usable ==> usable
[ 0.000000] e820: update [mem 0xa979c018-0xa97ad857] usable ==> usable
[ 0.000000] e820: update [mem 0xa979c018-0xa97ad857] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a979c017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a979c018-0x00000000a97ad857] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a97ad858-0x00000000a97ae017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a97ae018-0x00000000a97bde57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a97bde58-0x00000000e4b96fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e4b97000-0x00000000e5672fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e5673000-0x00000000e569dfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000e569e000-0x00000000e57b1fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000e57b2000-0x00000000e5b29fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e5b2a000-0x00000000e6ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e7000000-0x00000000e7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe700000-0x00000000fe7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000111ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000112000000-0x0000000116ffffff] reserved
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: TPMFinalLog=0xe5772000 ACPI 2.0=0xe567b000 ACPI=0xe567b000 SMBIOS=0xe59d2000 SMBIOS 3.0=0xe59d1000 ESRT=0xe3f95a98 MEMATTR=0xe37ea018 TPMEventLog=0xa97be018
[ 0.000000] Kernel is locked down from EFI Secure Boot; see https://wiki.debian.org/SecureBoot
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. E402BA/E402BA, BIOS E402BA.314 02/26/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2495.416 MHz processor
[ 0.000285] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000286] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000294] last_pfn = 0x112000 max_arch_pfn = 0x400000000
[ 0.000300] MTRR default type: uncachable
[ 0.000301] MTRR fixed ranges enabled:
[ 0.000302] 00000-9FFFF write-back
[ 0.000303] A0000-BFFFF write-through
[ 0.000304] C0000-DFFFF uncachable
[ 0.000305] E0000-FFFFF write-protect
[ 0.000305] MTRR variable ranges enabled:
[ 0.000307] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000308] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000310] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000310] 3 base 0000E0000000 mask FFFFF8000000 write-back
[ 0.000311] 4 base 0000E7000000 mask FFFFFF000000 uncachable
[ 0.000312] 5 disabled
[ 0.000313] 6 disabled
[ 0.000313] 7 disabled
[ 0.000314] TOM2: 0000000117000000 aka 4464M
[ 0.000589] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000697] e820: update [mem 0xe7000000-0xffffffff] usable ==> reserved
[ 0.000705] last_pfn = 0xe7000 max_arch_pfn = 0x400000000
[ 0.005984] esrt: Reserving ESRT space from 0x00000000e3f95a98 to 0x00000000e3f95ad0.
[ 0.005990] e820: update [mem 0xe3f95000-0xe3f95fff] usable ==> reserved
[ 0.006006] Using GB pages for direct mapping
[ 0.007099] RAMDISK: [mem 0x3a8b2000-0x3e4cbfff]
[ 0.007110] ACPI: Early table checksum verification disabled
[ 0.007114] ACPI: RSDP 0x00000000E567B000 000024 (v02 _ASUS_)
[ 0.007118] ACPI: XSDT 0x00000000E567B098 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.007124] ACPI: FACP 0x00000000E5686DC8 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.007129] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200326/tbfadt-624)
[ 0.007133] ACPI: DSDT 0x00000000E567B1D0 00BBF7 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[ 0.007136] ACPI: FACS 0x00000000E576FF00 000040
[ 0.007139] ACPI: APIC 0x00000000E5686EE0 00007E (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.007141] ACPI: FPDT 0x00000000E5686F60 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.007144] ACPI: FIDT 0x00000000E5686FA8 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.007147] ACPI: ECDT 0x00000000E5687048 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.007149] ACPI: MCFG 0x00000000E5687110 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
[ 0.007151] ACPI: MSDM 0x00000000E5687150 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.007154] ACPI: HPET 0x00000000E56871A8 000038 (v01 _ASUS_ Notebook 01072009 AMI 00000005)
[ 0.007156] ACPI: UEFI 0x00000000E56871E0 000042 (v01 00000000 00000000)
[ 0.007159] ACPI: IVRS 0x00000000E5687228 0000D0 (v02 AMD AGESA 00000001 AMD 00000000)
[ 0.007161] ACPI: VFCT 0x00000000E56872F8 00FE84 (v01 _ASUS_ Notebook 00000001 AMD 31504F47)
[ 0.007164] ACPI: BGRT 0x00000000E5697180 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.007166] ACPI: TPM2 0x00000000E56971B8 000034 (v03 _ASUS_ Notebook 00000001 AMI 00000000)
[ 0.007169] ACPI: SSDT 0x00000000E56971F0 0006B2 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.007171] ACPI: SSDT 0x00000000E56978A8 004B5B (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.007173] ACPI: CRAT 0x00000000E569C408 000310 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.007176] ACPI: SSDT 0x00000000E569C718 00165E (v01 AMD CPMCMN 00000001 INTL 20120913)
[ 0.007186] ACPI: Local APIC address 0xfee00000
[ 0.007288] No NUMA configuration found
[ 0.007289] Faking a node at [mem 0x0000000000000000-0x0000000111ffffff]
[ 0.007294] NODE_DATA(0) allocated [mem 0x111ffb000-0x111ffffff]
[ 0.007324] Zone ranges:
[ 0.007325] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007326] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007327] Normal [mem 0x0000000100000000-0x0000000111ffffff]
[ 0.007328] Device empty
[ 0.007329] Movable zone start for each node
[ 0.007330] Early memory node ranges
[ 0.007331] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.007332] node 0: [mem 0x0000000000100000-0x00000000e4b96fff]
[ 0.007333] node 0: [mem 0x00000000e5b2a000-0x00000000e6ffffff]
[ 0.007334] node 0: [mem 0x0000000100000000-0x0000000111ffffff]
[ 0.007763] Zeroed struct page in unavailable ranges: 32756 pages
[ 0.007765] Initmem setup node 0 [mem 0x0000000000001000-0x0000000111ffffff]
[ 0.007767] On node 0 totalpages: 1015820
[ 0.007769] DMA zone: 64 pages used for memmap
[ 0.007770] DMA zone: 23 pages reserved
[ 0.007771] DMA zone: 3999 pages, LIFO batch:0
[ 0.007848] DMA32 zone: 14658 pages used for memmap
[ 0.007848] DMA32 zone: 938093 pages, LIFO batch:63
[ 0.025623] Normal zone: 1152 pages used for memmap
[ 0.025625] Normal zone: 73728 pages, LIFO batch:15
[ 0.026331] ACPI: PM-Timer IO Port: 0x808
[ 0.026334] ACPI: Local APIC address 0xfee00000
[ 0.026341] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.026349] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.026352] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.026354] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.026356] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.026357] ACPI: IRQ0 used by override.
[ 0.026358] ACPI: IRQ9 used by override.
[ 0.026360] Using ACPI (MADT) for SMP configuration information
[ 0.026361] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.026370] e820: update [mem 0xe3777000-0xe37a5fff] usable ==> reserved
[ 0.026383] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.026411] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.026413] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.026415] PM: hibernation: Registered nosave memory: [mem 0xa979c000-0xa979cfff]
[ 0.026416] PM: hibernation: Registered nosave memory: [mem 0xa97ad000-0xa97adfff]
[ 0.026417] PM: hibernation: Registered nosave memory: [mem 0xa97ae000-0xa97aefff]
[ 0.026419] PM: hibernation: Registered nosave memory: [mem 0xa97bd000-0xa97bdfff]
[ 0.026421] PM: hibernation: Registered nosave memory: [mem 0xe3777000-0xe37a5fff]
[ 0.026423] PM: hibernation: Registered nosave memory: [mem 0xe3f95000-0xe3f95fff]
[ 0.026424] PM: hibernation: Registered nosave memory: [mem 0xe4b97000-0xe5672fff]
[ 0.026425] PM: hibernation: Registered nosave memory: [mem 0xe5673000-0xe569dfff]
[ 0.026426] PM: hibernation: Registered nosave memory: [mem 0xe569e000-0xe57b1fff]
[ 0.026426] PM: hibernation: Registered nosave memory: [mem 0xe57b2000-0xe5b29fff]
[ 0.026428] PM: hibernation: Registered nosave memory: [mem 0xe7000000-0xe7ffffff]
[ 0.026429] PM: hibernation: Registered nosave memory: [mem 0xe8000000-0xf7ffffff]
[ 0.026429] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.026430] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfe6fffff]
[ 0.026431] PM: hibernation: Registered nosave memory: [mem 0xfe700000-0xfe7fffff]
[ 0.026431] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfeb7ffff]
[ 0.026432] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.026432] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.026433] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.026434] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.026434] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.026435] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.026435] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.026436] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.026436] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.026437] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
[ 0.026438] PM: hibernation: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
[ 0.026438] PM: hibernation: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
[ 0.026439] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
[ 0.026439] PM: hibernation: Registered nosave memory: [mem 0xfedc9000-0xfedfffff]
[ 0.026440] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.026441] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.026441] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.026443] [mem 0xe8000000-0xf7ffffff] available for PCI devices
[ 0.026445] Booting paravirtualized kernel on bare hardware
[ 0.026449] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.029988] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.030571] percpu: Embedded 55 pages/cpu s188056 r8192 d29032 u524288
[ 0.030579] pcpu-alloc: s188056 r8192 d29032 u524288 alloc=1*2097152
[ 0.030580] pcpu-alloc: [0] 0 1 2 3
[ 0.030610] Built 1 zonelists, mobility grouping on. Total pages: 999923
[ 0.030611] Policy zone: Normal
[ 0.030613] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.7.0-0.bpo.2-amd64 root=UUID=3bc719bc-b403-4282-ab3b-f9d6fd8ca814 ro acpi_osi=Linux quiet splash
[ 0.031557] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.032009] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.032040] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.064790] Memory: 3740132K/4063280K available (10243K kernel code, 1272K rwdata, 4020K rodata, 1628K init, 1944K bss, 256972K reserved, 0K cma-reserved)
[ 0.064944] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.064960] ftrace: allocating 34999 entries in 137 pages
[ 0.081820] ftrace: allocated 137 pages with 3 groups
[ 0.081939] rcu: Hierarchical RCU implementation.
[ 0.081940] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.081942] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.081943] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.086152] NR_IRQS: 33024, nr_irqs: 1000, preallocated irqs: 16
[ 0.086474] random: crng done (trusting CPU's manufacturer)
[ 0.086507] Console: colour dummy device 80x25
[ 0.086514] printk: console [tty0] enabled
[ 0.086541] ACPI: Core revision 20200326
[ 0.086745] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.086760] APIC: Switch to symmetric I/O mode setup
[ 0.087927] AMD-Vi: Disable IOMMU on Stoney Ridge
[ 0.088433] AMD-Vi: AMD IOMMU disabled
[ 0.088866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.106761] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f84f85ce1, max_idle_ns: 440795273801 ns
[ 0.106768] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.83 BogoMIPS (lpj=9981664)
[ 0.106770] pid_max: default: 32768 minimum: 301
[ 0.109049] LSM: Security Framework initializing
[ 0.109059] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.109087] AppArmor: AppArmor initialized
[ 0.109089] TOMOYO Linux initialized
[ 0.109122] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.109136] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.109419] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[ 0.109478] LVT offset 1 assigned for vector 0xf9
[ 0.109486] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.109487] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.109492] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.109494] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.109495] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.109496] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.109498] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.109694] Freeing SMP alternatives memory: 32K
[ 0.220743] smpboot: CPU0: AMD A6-9220 RADEON R4, 5 COMPUTE CORES 2C+3G (family: 0x15, model: 0x70, stepping: 0x0)
[ 0.220922] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.220927] ... version: 0
[ 0.220928] ... bit width: 48
[ 0.220928] ... generic registers: 6
[ 0.220929] ... value mask: 0000ffffffffffff
[ 0.220929] ... max period: 00007fffffffffff
[ 0.220930] ... fixed-purpose events: 0
[ 0.220930] ... event mask: 000000000000003f
[ 0.220975] rcu: Hierarchical SRCU implementation.
[ 0.221404] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.221478] smp: Bringing up secondary CPUs ...
[ 0.221596] x86: Booting SMP configuration:
[ 0.221597] .... node #0, CPUs: #1
[ 0.222764] smp: Brought up 1 node, 2 CPUs
[ 0.222764] smpboot: Max logical packages: 2
[ 0.222764] smpboot: Total of 2 processors activated (9981.66 BogoMIPS)
[ 0.222786] node 0 initialised, 16544 pages in 4ms
[ 0.223004] devtmpfs: initialized
[ 0.223004] x86/mm: Memory block size: 128MB
[ 0.223312] PM: Registering ACPI NVS region [mem 0xe569e000-0xe57b1fff] (1130496 bytes)
[ 0.223312] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.223312] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.223312] pinctrl core: initialized pinctrl subsystem
[ 0.223312] thermal_sys: Registered thermal governor 'fair_share'
[ 0.223312] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.223312] thermal_sys: Registered thermal governor 'step_wise'
[ 0.223312] thermal_sys: Registered thermal governor 'user_space'
[ 0.223312] NET: Registered protocol family 16
[ 0.223312] audit: initializing netlink subsys (disabled)
[ 0.223312] audit: type=2000 audit(1601565975.136:1): state=initialized audit_enabled=0 res=1
[ 0.223312] cpuidle: using governor ladder
[ 0.223312] cpuidle: using governor menu
[ 0.223312] ACPI: bus type PCI registered
[ 0.223312] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.223312] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.223312] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.223312] PCI: Using configuration type 1 for base access
[ 0.224093] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.224093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.399140] ACPI: Added _OSI(Module Device)
[ 0.399140] ACPI: Added _OSI(Processor Device)
[ 0.399140] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.399140] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.399140] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.399140] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.399140] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.399140] ACPI: Added _OSI(Linux)
[ 0.410792] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.411693] ACPI: EC: EC started
[ 0.411694] ACPI: EC: interrupt blocked
[ 0.412425] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.412426] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.413612] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline
[ 0.415749] ACPI: Interpreter enabled
[ 0.415774] ACPI: (supports S0 S3 S4 S5)
[ 0.415776] ACPI: Using IOAPIC for interrupt routing
[ 0.415804] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.416057] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.417948] ACPI: Power Resource [P0SD] (off)
[ 0.417981] ACPI: Power Resource [P3SD] (off)
[ 0.418077] ACPI: Power Resource [P0U2] (off)
[ 0.418106] ACPI: Power Resource [P3U2] (off)
[ 0.418825] ACPI: Power Resource [P0U3] (off)
[ 0.418855] ACPI: Power Resource [P3U3] (off)
[ 0.419224] ACPI: Power Resource [P0ST] (on)
[ 0.419253] ACPI: Power Resource [P3ST] (on)
[ 0.422114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.422120] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.422272] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.422412] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.422430] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.422690] PCI host bridge to bus 0000:00
[ 0.422693] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.422694] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.422695] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.422697] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.422698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.422699] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.422700] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xfed3ffff window]
[ 0.422701] pci_bus 0000:00: root bus resource [mem 0xfedca000-0xffffffff window]
[ 0.422703] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.422712] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[ 0.422823] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[ 0.422932] pci 0000:00:01.0: [1002:98e4] type 00 class 0x030000
[ 0.422949] pci 0000:00:01.0: reg 0x10: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.422956] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.422961] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.422966] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.422971] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.422976] pci 0000:00:01.0: enabling Extended Tags
[ 0.422984] pci 0000:00:01.0: BAR 0: assigned to efifb
[ 0.423014] pci 0000:00:01.0: supports D1 D2
[ 0.423015] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.423109] pci 0000:00:01.1: [1002:15b3] type 00 class 0x040300
[ 0.423122] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.423140] pci 0000:00:01.1: enabling Extended Tags
[ 0.423168] pci 0000:00:01.1: supports D1 D2
[ 0.423227] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[ 0.423301] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
[ 0.423337] pci 0000:00:02.2: enabling Extended Tags
[ 0.423377] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.423464] pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
[ 0.423500] pci 0000:00:02.3: enabling Extended Tags
[ 0.423538] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.423624] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[ 0.423707] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[ 0.423719] pci 0000:00:08.0: reg 0x10: [mem 0xf0800000-0xf081ffff 64bit pref]
[ 0.423723] pci 0000:00:08.0: reg 0x18: [mem 0xfe800000-0xfe8fffff]
[ 0.423727] pci 0000:00:08.0: reg 0x1c: [mem 0xfeb70000-0xfeb70fff]
[ 0.423735] pci 0000:00:08.0: reg 0x24: [mem 0xfeb6a000-0xfeb6bfff]
[ 0.423816] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[ 0.423887] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[ 0.423896] pci 0000:00:09.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff]
[ 0.423925] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[ 0.424012] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[ 0.424038] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.424141] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.424235] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[ 0.424253] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.424261] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.424269] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.424276] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.424284] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.424292] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff]
[ 0.424327] pci 0000:00:11.0: PME# supported from D3hot
[ 0.424403] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[ 0.424421] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
[ 0.424489] pci 0000:00:12.0: supports D1 D2
[ 0.424490] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.424563] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.424689] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.424818] pci 0000:00:14.7: [1022:7906] type 00 class 0x080501
[ 0.424838] pci 0000:00:14.7: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff 64bit]
[ 0.424892] pci 0000:00:14.7: PME# supported from D3cold
[ 0.424963] pci 0000:00:18.0: [1022:15b0] type 00 class 0x060000
[ 0.425022] pci 0000:00:18.1: [1022:15b1] type 00 class 0x060000
[ 0.425077] pci 0000:00:18.2: [1022:15b2] type 00 class 0x060000
[ 0.425142] pci 0000:00:18.3: [1022:15b3] type 00 class 0x060000
[ 0.425201] pci 0000:00:18.4: [1022:15b4] type 00 class 0x060000
[ 0.425255] pci 0000:00:18.5: [1022:15b5] type 00 class 0x060000
[ 0.425373] pci 0000:01:00.0: [168c:0036] type 00 class 0x028000
[ 0.425399] pci 0000:01:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit]
[ 0.425429] pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref]
[ 0.425493] pci 0000:01:00.0: supports D1 D2
[ 0.425494] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.425601] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.425607] pci 0000:00:02.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.425682] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.425713] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.425740] pci 0000:02:00.0: reg 0x18: [mem 0xfe904000-0xfe904fff 64bit]
[ 0.425759] pci 0000:02:00.0: reg 0x20: [mem 0xfe900000-0xfe903fff 64bit]
[ 0.425861] pci 0000:02:00.0: supports D1 D2
[ 0.425862] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426055] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.426059] pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
[ 0.426062] pci 0000:00:02.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.426719] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.426778] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.426822] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.426871] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.426915] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.426952] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.426989] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.427026] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.427882] ACPI: EC: interrupt unblocked
[ 0.427883] ACPI: EC: event unblocked
[ 0.427888] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.427888] ACPI: EC: GPE=0x3
[ 0.427890] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete
[ 0.427891] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.427959] iommu: Default domain type: Translated
[ 0.427977] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.427977] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.427977] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.427977] vgaarb: loaded
[ 0.427977] EDAC MC: Ver: 3.0.0
[ 0.427977] Registered efivars operations
[ 0.427977] PCI: Using ACPI for IRQ routing
[ 0.428554] PCI: pci_cache_line_size set to 64 bytes
[ 0.428599] Expanded resource Reserved due to conflict with AMD0020:01
[ 0.428601] e820: reserve RAM buffer [mem 0xa979c018-0xabffffff]
[ 0.428602] e820: reserve RAM buffer [mem 0xa97ae018-0xabffffff]
[ 0.428603] e820: reserve RAM buffer [mem 0xe3777000-0xe3ffffff]
[ 0.428604] e820: reserve RAM buffer [mem 0xe3f95000-0xe3ffffff]
[ 0.428605] e820: reserve RAM buffer [mem 0xe4b97000-0xe7ffffff]
[ 0.428606] e820: reserve RAM buffer [mem 0xe7000000-0xe7ffffff]
[ 0.428607] e820: reserve RAM buffer [mem 0x112000000-0x113ffffff]
[ 0.428729] NetLabel: Initializing
[ 0.428730] NetLabel: domain hash size = 128
[ 0.428731] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.428745] NetLabel: unlabeled traffic allowed by default
[ 0.428779] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.428781] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.431796] clocksource: Switched to clocksource tsc-early
[ 0.444401] VFS: Disk quotas dquot_6.6.0
[ 0.444420] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.444570] AppArmor: AppArmor Filesystem Enabled
[ 0.444591] pnp: PnP ACPI init
[ 0.444756] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.444763] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.444827] system 00:01: [mem 0xe3000000-0xe7ffffff] could not be reserved
[ 0.444831] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444895] system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.444899] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444959] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.445034] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.445097] pnp 00:05: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.445286] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.445287] system 00:06: [io 0x040b] has been reserved
[ 0.445289] system 00:06: [io 0x04d6] has been reserved
[ 0.445290] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.445291] system 00:06: [io 0x0c14] has been reserved
[ 0.445293] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.445294] system 00:06: [io 0x0c52] has been reserved
[ 0.445295] system 00:06: [io 0x0c6c] has been reserved
[ 0.445296] system 00:06: [io 0x0c6f] has been reserved
[ 0.445297] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.445299] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.445300] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.445301] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.445302] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.445303] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.445305] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.445306] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.445308] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.445310] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.445311] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.445312] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.445314] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.445315] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.445317] system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.445318] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.445319] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.445323] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.445941] pnp: PnP ACPI: found 7 devices
[ 0.451974] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.452027] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.452032] pci 0000:00:02.2: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.452038] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.452040] pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
[ 0.452044] pci 0000:00:02.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.452051] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.452053] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.452054] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.452055] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.452057] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.452058] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.452059] pci_bus 0000:00: resource 10 [mem 0xe8000000-0xfed3ffff window]
[ 0.452060] pci_bus 0000:00: resource 11 [mem 0xfedca000-0xffffffff window]
[ 0.452062] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.452063] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.452064] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.452157] NET: Registered protocol family 2
[ 0.452317] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.452327] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.452388] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.452497] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.452554] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.452571] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.452686] NET: Registered protocol family 1
[ 0.452694] NET: Registered protocol family 44
[ 0.452708] pci 0000:00:01.0: disabling ATS
[ 0.452715] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.452723] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.452991] pci 0000:00:10.0: PME# does not work under D0, disabling it
[ 0.453132] PCI: CLS 64 bytes, default 64
[ 0.453207] Trying to unpack rootfs image as initramfs...
[ 1.438802] Freeing initrd memory: 61544K
[ 1.438842] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.438844] software IO TLB: mapped [mem 0xde176000-0xe2176000] (64MB)
[ 1.438881] LVT offset 0 assigned for vector 0x400
[ 1.438993] perf: AMD IBS detected (0x000007ff)
[ 1.439433] Initialise system trusted keyrings
[ 1.439444] Key type blacklist registered
[ 1.439512] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.440932] zbud: loaded
[ 1.441114] integrity: Platform Keyring initialized
[ 1.441117] Key type asymmetric registered
[ 1.441118] Asymmetric key parser 'x509' registered
[ 1.441128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.441194] io scheduler mq-deadline registered
[ 1.441834] pcieport 0000:00:02.2: PME: Signaling with IRQ 25
[ 1.441982] pcieport 0000:00:02.3: PME: Signaling with IRQ 26
[ 1.442078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.442095] efifb: probing for efifb
[ 1.442108] efifb: framebuffer at 0xe8000000, using 1952k, total 1950k
[ 1.442109] efifb: mode is 800x600x32, linelength=3328, pages=1
[ 1.442109] efifb: scrolling: redraw
[ 1.442111] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.442202] Console: switching to colour frame buffer device 100x37
[ 1.443367] fb0: EFI VGA frame buffer device
[ 1.443405] ACPI: \_PR_.P000: Found 2 idle states
[ 1.443491] ACPI: \_PR_.P001: Found 2 idle states
[ 1.444305] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.444306] ACPI: Thermal Zone [THRM] (55 C)
[ 1.444429] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.444879] AMD0020:00: ttyS0 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A
[ 1.445489] AMD0020:01: ttyS1 at MMIO 0xfedc8000 (irq = 11, base_baud = 3000000) is a 16550A
[ 1.446052] Linux agpgart interface v0.103
[ 1.446095] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.446096] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.446242] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.449721] i8042: Detected active multiplexing controller, rev 1.1
[ 1.450832] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.450837] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.450863] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.450884] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.450905] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.451010] mousedev: PS/2 mouse device common for all mice
[ 1.451052] rtc_cmos 00:03: RTC can wake from S4
[ 1.451208] rtc_cmos 00:03: registered as rtc0
[ 1.451234] rtc_cmos 00:03: setting system clock to 2020-10-01T15:26:16 UTC (1601565976)
[ 1.451252] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.451279] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.451376] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[ 1.451567] NET: Registered protocol family 10
[ 1.460689] Segment Routing with IPv6
[ 1.460721] mip6: Mobile IPv6
[ 1.460724] NET: Registered protocol family 17
[ 1.460761] mpls_gso: MPLS GSO support
[ 1.460939] microcode: CPU0: patch_level=0x06006705
[ 1.460945] microcode: CPU1: patch_level=0x06006705
[ 1.460949] microcode: Microcode Update Driver: v2.2.
[ 1.460955] IPI shorthand broadcast: enabled
[ 1.460962] sched_clock: Marking stable (1460449175, 424737)->(1464455831, -3581919)
[ 1.461054] registered taskstats version 1
[ 1.461057] Loading compiled-in X.509 certificates
[ 1.489902] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.502239] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.502257] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 1.502280] zswap: loaded using pool lzo/zbud
[ 1.502411] Key type ._fscrypt registered
[ 1.502412] Key type .fscrypt registered
[ 1.502413] Key type fscrypt-provisioning registered
[ 1.502454] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.503296] integrity: Loading X.509 certificate: UEFI:db
[ 1.503544] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 1.503545] integrity: Loading X.509 certificate: UEFI:db
[ 1.503789] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 1.503789] integrity: Loading X.509 certificate: UEFI:db
[ 1.503814] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.503815] integrity: Loading X.509 certificate: UEFI:db
[ 1.503835] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.503835] integrity: Loading X.509 certificate: UEFI:db
[ 1.504080] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.505842] Lockdown: swapper/0: hibernation is restricted; see https://wiki.debian.org/SecureBoot
[ 1.507599] Freeing unused kernel image (initmem) memory: 1628K
[ 1.523037] Write protecting the kernel read-only data: 16384k
[ 1.523762] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.523809] Freeing unused kernel image (rodata/data gap) memory: 76K
[ 1.565873] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.565876] Run /init as init process
[ 1.565877] with arguments:
[ 1.565878] /init
[ 1.565879] splash
[ 1.565879] with environment:
[ 1.565880] HOME=/
[ 1.565880] TERM=linux
[ 1.565881] BOOT_IMAGE=/boot/vmlinuz-5.7.0-0.bpo.2-amd64
[ 1.630652] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0e/PNP0C09:00/PNP0C0D:00/input/input4
[ 1.630681] ACPI: Lid Switch [LID]
[ 1.630762] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 1.630827] ACPI: Power Button [PWRB]
[ 1.630876] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 1.630895] ACPI: Sleep Button [SLPB]
[ 1.630940] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 1.630979] ACPI: Power Button [PWRF]
[ 1.643630] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.651857] ACPI BIOS Error (bug): Could not resolve symbol [^^^PB2.VGA.AFN7], AE_NOT_FOUND (20200326/psargs-330)
[ 1.651925] ACPI Error: Aborting method \_SB.PCI0.VGA.LCDD._BCM due to previous error (AE_NOT_FOUND) (20200326/psparse-531)
[ 1.651984] ACPI Error: Evaluating _BCM failed (20200326/video-357)
[ 1.652117] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 1.692344] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.692347] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 1.692415] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.705014] SCSI subsystem initialized
[ 1.727654] ACPI: bus type USB registered
[ 1.727680] usbcore: registered new interface driver usbfs
[ 1.727688] usbcore: registered new interface driver hub
[ 1.728119] usbcore: registered new device driver usb
[ 1.743232] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.744431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.748110] sdhci: Secure Digital Host Controller Interface driver
[ 1.748112] sdhci: Copyright(c) Pierre Ossman
[ 1.749636] ehci-pci: EHCI PCI platform driver
[ 1.749835] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 1.749843] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.749857] ehci-pci 0000:00:12.0: debug port 2
[ 1.749899] ehci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000
[ 1.752328] libphy: r8169: probed
[ 1.752559] r8169 0000:02:00.0 eth0: RTL8168gu/8111gu, b0:6e:bf:15:78:d9, XID 509, IRQ 28
[ 1.752561] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.760388] libata version 3.00 loaded.
[ 1.762800] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 1.762931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 1.762933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.762935] usb usb1: Product: EHCI Host Controller
[ 1.762936] usb usb1: Manufacturer: Linux 5.7.0-0.bpo.2-amd64 ehci_hcd
[ 1.762937] usb usb1: SerialNumber: 0000:00:12.0
[ 1.763100] hub 1-0:1.0: USB hub found
[ 1.763109] hub 1-0:1.0: 2 ports detected
[ 1.767740] ahci 0000:00:11.0: version 3.0
[ 1.768093] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.768097] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 1.769486] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1)
[ 1.769495] sdhci-pci 0000:00:14.7: enabling device (0000 -> 0002)
[ 1.774307] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.774317] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.774502] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 1.787082] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 1.788559] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 1.788561] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.788563] usb usb2: Product: xHCI Host Controller
[ 1.788564] usb usb2: Manufacturer: Linux 5.7.0-0.bpo.2-amd64 xhci-hcd
[ 1.788565] usb usb2: SerialNumber: 0000:00:10.0
[ 1.788915] hub 2-0:1.0: USB hub found
[ 1.789594] hub 2-0:1.0: 4 ports detected
[ 1.791544] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.791555] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.791560] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 1.791935] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.791966] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[ 1.791968] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.791969] usb usb3: Product: xHCI Host Controller
[ 1.791970] usb usb3: Manufacturer: Linux 5.7.0-0.bpo.2-amd64 xhci-hcd
[ 1.791972] usb usb3: SerialNumber: 0000:00:10.0
[ 1.792336] hub 3-0:1.0: USB hub found
[ 1.792536] hub 3-0:1.0: 4 ports detected
[ 1.796693] scsi host0: ahci
[ 1.796816] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 19
[ 1.847008] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[ 1.872031] input: FocalTechPS/2 FocalTech Touchpad as /devices/platform/i8042/serio4/input/input13
[ 1.973615] [drm] amdgpu kernel modesetting enabled.
[ 1.973703] Parsing CRAT table with 1 nodes
[ 1.973708] Creating topology SYSFS entries
[ 1.973725] Topology: Add APU node [0x0:0x0]
[ 1.973726] Finished initializing topology
[ 1.973793] checking generic (e8000000 1e8000) vs hw (e8000000 8000000)
[ 1.973794] fb0: switching to amdgpudrmfb from EFI VGA
[ 1.973876] Console: switching to colour dummy device 80x25
[ 1.973928] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[ 1.974136] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x1043:0x1680 0xEA).
[ 1.974156] [drm] register mmio base: 0xFEB00000
[ 1.974156] [drm] register mmio size: 262144
[ 1.974162] [drm] add ip block number 0 <vi_common>
[ 1.974163] [drm] add ip block number 1 <gmc_v8_0>
[ 1.974164] [drm] add ip block number 2 <cz_ih>
[ 1.974165] [drm] add ip block number 3 <gfx_v8_0>
[ 1.974166] [drm] add ip block number 4 <sdma_v3_0>
[ 1.974167] [drm] add ip block number 5 <powerplay>
[ 1.974168] [drm] add ip block number 6 <dm>
[ 1.974169] [drm] add ip block number 7 <uvd_v6_0>
[ 1.974170] [drm] add ip block number 8 <vce_v3_0>
[ 1.974171] [drm] add ip block number 9 <acp_ip>
[ 1.974174] kfd kfd: STONEY not supported in kfd
[ 1.974208] ATOM BIOS: SWBRT01116.001
[ 1.974229] [drm] UVD is enabled in physical mode
[ 1.974231] [drm] VCE enabled in VM mode
[ 1.974261] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 1.974268] amdgpu 0000:00:01.0: VRAM: 80M 0x000000F400000000 - 0x000000F404FFFFFF (80M used)
[ 1.974270] amdgpu 0000:00:01.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[ 1.974275] [drm] Detected VRAM RAM=80M, BAR=80M
[ 1.974276] [drm] RAM width 64bits UNKNOWN
[ 1.974362] [TTM] Zone kernel: Available graphics memory: 1951706 KiB
[ 1.974363] [TTM] Initializing pool allocator
[ 1.974368] [TTM] Initializing DMA pool allocator
[ 1.974406] [drm] amdgpu: 80M of VRAM memory ready
[ 1.974408] [drm] amdgpu: 2858M of GTT memory ready.
[ 1.974411] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.974442] [drm] PCIE GART of 1024M enabled (table at 0x000000F4001D5000).
[ 1.974552] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_pfp.bin
[ 1.974573] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_me.bin
[ 1.974589] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_ce.bin
[ 1.974608] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_rlc.bin
[ 1.974719] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_mec.bin
[ 1.975616] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_sdma.bin
[ 1.975705] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu8_smu
[ 1.975869] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_uvd.bin
[ 1.975873] [drm] Found UVD firmware Version: 1.43 Family ID: 15
[ 1.975878] [drm] UVD ENC is disabled
[ 1.976189] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/stoney_vce.bin
[ 1.976194] [drm] Found VCE firmware Version: 52.0 Binary ID: 3
[ 1.976640] smu version 26.16.00
[ 2.005013] [drm] DM_PPLIB: values for Engine clock
[ 2.005015] [drm] DM_PPLIB: 200000
[ 2.005015] [drm] DM_PPLIB: 300000
[ 2.005016] [drm] DM_PPLIB: 400000
[ 2.005016] [drm] DM_PPLIB: 464520
[ 2.005016] [drm] DM_PPLIB: 514290
[ 2.005017] [drm] DM_PPLIB: 576000
[ 2.005017] [drm] DM_PPLIB: 626090
[ 2.005018] [drm] DM_PPLIB: 654550
[ 2.005019] [drm] DM_PPLIB: Validation clocks:
[ 2.005020] [drm] DM_PPLIB: engine_max_clock: 65455
[ 2.005020] [drm] DM_PPLIB: memory_max_clock: 80000
[ 2.005020] [drm] DM_PPLIB: level : 8
[ 2.005022] [drm] DM_PPLIB: values for Display clock
[ 2.005022] [drm] DM_PPLIB: 300000
[ 2.005023] [drm] DM_PPLIB: 400000
[ 2.005023] [drm] DM_PPLIB: 496560
[ 2.005024] [drm] DM_PPLIB: 626090
[ 2.005024] [drm] DM_PPLIB: 685720
[ 2.005024] [drm] DM_PPLIB: 757900
[ 2.005025] [drm] DM_PPLIB: 800000
[ 2.005025] [drm] DM_PPLIB: 847060
[ 2.005026] [drm] DM_PPLIB: Validation clocks:
[ 2.005026] [drm] DM_PPLIB: engine_max_clock: 65455
[ 2.005027] [drm] DM_PPLIB: memory_max_clock: 80000
[ 2.005027] [drm] DM_PPLIB: level : 8
[ 2.005028] [drm] DM_PPLIB: values for Memory clock
[ 2.005028] [drm] DM_PPLIB: 333000
[ 2.005029] [drm] DM_PPLIB: 800000
[ 2.005029] [drm] DM_PPLIB: Validation clocks:
[ 2.005030] [drm] DM_PPLIB: engine_max_clock: 65455
[ 2.005030] [drm] DM_PPLIB: memory_max_clock: 80000
[ 2.005030] [drm] DM_PPLIB: level : 8
[ 2.005109] [drm] Display Core initialized with v3.2.76!
[ 2.037583] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.063520] [drm] UVD initialized successfully.
[ 2.163676] [drm] VCE initialized successfully.
[ 2.166007] [drm] fb mappable at 0x112643000
[ 2.166008] [drm] vram apper at 0x112000000
[ 2.166009] [drm] size 8294400
[ 2.166010] [drm] fb depth is 24
[ 2.166010] [drm] pitch is 7680
[ 2.166115] fbcon: amdgpudrmfb (fb0) is primary device
[ 2.183357] Console: switching to colour frame buffer device 240x67
[ 2.204684] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[ 2.219803] [drm] Initialized amdgpu 3.37.0 20150101 for 0000:00:01.0 on minor 0
[ 2.222799] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.270980] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.379437] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 2.379440] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.379741] hub 1-1:1.0: USB hub found
[ 2.379805] hub 1-1:1.0: 4 ports detected
[ 2.397309] ata1.00: ATA-10: ST1000LM035-1RK172, SDM1, max UDMA/133
[ 2.397312] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.447194] ata1.00: configured for UDMA/133
[ 2.447343] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SDM1 PQ: 0 ANSI: 5
[ 2.453544] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.453547] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.453558] sd 0:0:0:0: [sda] Write Protect is off
[ 2.453560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.453578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.454955] tsc: Refined TSC clocksource calibration: 2495.317 MHz
[ 2.454963] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7f206bf1, max_idle_ns: 440795322908 ns
[ 2.454978] clocksource: Switched to clocksource tsc
[ 2.525444] sda: sda1 sda2 sda3
[ 2.525909] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.666962] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.778502] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[ 2.778505] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.778506] usb 1-1.1: Product: USB Receiver
[ 2.778507] usb 1-1.1: Manufacturer: Logitech
[ 2.785193] hid: raw HID events driver (C) Jiri Kosina
[ 2.791906] usbcore: registered new interface driver usbhid
[ 2.791908] usbhid: USB HID core driver
[ 2.793876] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0001/input/input14
[ 2.794007] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input0
[ 2.794253] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/input/input15
[ 2.851233] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input1
[ 2.858961] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.867241] logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input0
[ 2.943409] logitech-djreceiver 0003:046D:C52F.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input1
[ 2.968673] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=3490, bcdDevice= 0.01
[ 2.968676] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.006106] logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD step 4 DJ (0x04) connected on slot 1
[ 3.006553] input: Logitech Wireless Mouse PID:4008 Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input18
[ 3.006647] input: Logitech Wireless Mouse PID:4008 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input19
[ 3.006687] hid-generic 0003:046D:4008.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4008] on usb-0000:00:12.0-1.1/input1:1
[ 3.046959] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[ 3.054482] input: Logitech M185 as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input23
[ 3.054573] logitech-hidpp-device 0003:046D:4008.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech M185] on usb-0000:00:12.0-1.1/input1:1
[ 3.197574] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=5a01, bcdDevice=16.08
[ 3.197577] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.197579] usb 1-1.3: Product: USB2.0 VGA UVC WebCam
[ 3.197580] usb 1-1.3: Manufacturer: Azurewave
[ 3.197581] usb 1-1.3: SerialNumber: 0x0001
[ 3.606772] raid6: avx2x4 gen() 11348 MB/s
[ 3.674777] raid6: avx2x4 xor() 3376 MB/s
[ 3.742774] raid6: avx2x2 gen() 10279 MB/s
[ 3.810772] raid6: avx2x2 xor() 7164 MB/s
[ 3.878771] raid6: avx2x1 gen() 11370 MB/s
[ 3.946771] raid6: avx2x1 xor() 6537 MB/s
[ 4.014774] raid6: sse2x4 gen() 8837 MB/s
[ 4.082772] raid6: sse2x4 xor() 3376 MB/s
[ 4.150774] raid6: sse2x2 gen() 10442 MB/s
[ 4.218779] raid6: sse2x2 xor() 6497 MB/s
[ 4.286773] raid6: sse2x1 gen() 8010 MB/s
[ 4.354771] raid6: sse2x1 xor() 5526 MB/s
[ 4.354774] raid6: using algorithm avx2x1 gen() 11370 MB/s
[ 4.354774] raid6: .... xor() 6537 MB/s, rmw enabled
[ 4.354776] raid6: using avx2x2 recovery algorithm
[ 4.363287] xor: automatically using best checksumming function avx
[ 4.427649] Btrfs loaded, crc32c=crc32c-intel
[ 4.601733] process '/usr/bin/fstype' started with executable stack
[ 4.749858] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.151023] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 5.975869] systemd[1]: Inserted module 'autofs4'
[ 6.122342] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 6.139146] systemd[1]: Detected architecture x86-64.
[ 6.170124] systemd[1]: Set hostname to <debian>.
[ 6.182428] Lockdown: systemd: /dev/mem,kmem,port is restricted; see https://wiki.debian.org/SecureBoot
[ 6.806401] systemd[1]: /lib/systemd/system/systemd-swap.service:21: Unknown lvalue 'ProtectClock' in section 'Service', ignoring
[ 6.806418] systemd[1]: /lib/systemd/system/systemd-swap.service:24: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring
[ 6.806424] systemd[1]: /lib/systemd/system/systemd-swap.service:25: Unknown lvalue 'ProtectKernelLogs' in section 'Service', ignoring
[ 6.806435] systemd[1]: /lib/systemd/system/systemd-swap.service:28: Unknown lvalue 'RestrictSUIDSGID' in section 'Service', ignoring
[ 6.835584] systemd[1]: /etc/systemd/system/anydesk.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
[ 6.859037] systemd[1]: Listening on Journal Audit Socket.
[ 6.859907] systemd[1]: Created slice system-getty.slice.
[ 7.231478] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 7.248711] lp: driver loaded but no devices found
[ 7.256410] systemd-journald[208]: Received request to flush runtime journal from PID 1
[ 7.270966] ppdev: user-space parallel port driver
[ 7.932188] acpi_cpufreq: overriding BIOS provided _PSD data
[ 8.187652] EFI Variables Facility v0.08 2004-May-17
[ 8.203365] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xe57aa000-0xe57aafff flags 0x200] vs e57aa000 4000
[ 8.203371] tpm_crb MSFT0101:00: can't request region for resource [mem 0xe57aa000-0xe57aafff]
[ 8.203380] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 8.221627] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 8.221736] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 8.221741] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 8.239336] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input24
[ 8.248289] pstore: Using crash dump compression: deflate
[ 8.248304] pstore: Registered efi as persistent store backend
[ 8.268669] ACPI: AC Adapter [AC0] (on-line)
[ 8.289931] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.373938] asus_wmi: ASUS WMI generic driver loaded
[ 8.418633] cryptd: max_cpu_qlen set to 1000
[ 8.472990] asus_wmi: Initialization: 0x1
[ 8.473036] asus_wmi: BIOS WMI version: 9.0
[ 8.473065] asus_wmi: SFUN value: 0x21
[ 8.473069] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 8.473070] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 8.474112] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input25
[ 8.478745] battery: new extension: ASUS Battery Extension
[ 8.550244] AVX2 version of gcm_enc/dec engaged.
[ 8.550246] AES CTR mode by8 optimization enabled
[ 8.550549] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.550880] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 8.551163] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 8.551411] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.823124] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[ 8.823266] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 8.824173] snd_hda_intel 0000:00:09.2: enabling device (0004 -> 0006)
[ 8.875910] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 8.910356] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 8.966930] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 8.972482] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input26
[ 9.125951] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 9.127049] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 9.127052] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.127054] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 9.127056] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 9.127057] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 9.127059] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
[ 9.127061] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
[ 9.142074] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input27
[ 9.144292] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input28
[ 9.148666] kvm: Nested Virtualization enabled
[ 9.148670] SVM: kvm: Nested Paging enabled
[ 9.148671] SVM: Virtual VMLOAD VMSAVE supported
[ 9.148672] SVM: Virtual GIF supported
[ 9.269618] MCE: In-kernel MCE decoding enabled.
[ 9.514687] ath9k 0000:01:00.0: enabling device (0000 -> 0002)
[ 9.515478] ath: phy0: Set BT/WLAN RX diversity capability
[ 9.522680] ath: phy0: Enable LNA combining
[ 9.523857] ath: EEPROM regdomain: 0x6a
[ 9.523860] ath: EEPROM indicates we should expect a direct regpair map
[ 9.523862] ath: Country alpha2 being used: 00
[ 9.523863] ath: Regpair used: 0x6a
[ 9.525063] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.525795] ieee80211 phy0: Atheros AR9565 Rev:2 mem=0xffffa23d01000000, irq=37
[ 9.658399] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[ 10.699331] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 10.806611] mc: Linux media interface: v0.10
[ 10.875900] Bluetooth: Core ver 2.22
[ 10.875937] NET: Registered protocol family 31
[ 10.875937] Bluetooth: HCI device and connection manager initialized
[ 10.876446] Bluetooth: HCI socket layer initialized
[ 10.876450] Bluetooth: L2CAP socket layer initialized
[ 10.876454] Bluetooth: SCO socket layer initialized
[ 10.882386] videodev: Linux video capture interface: v2.00
[ 11.089714] usbcore: registered new interface driver btusb
[ 11.096092] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (13d3:5a01)
[ 11.103338] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[ 11.103342] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[ 11.103344] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[ 11.103446] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input29
[ 11.104036] usbcore: registered new interface driver uvcvideo
[ 11.104039] USB Video Class driver (1.1.1)
[ 11.133403] usb 1-1.2: firmware: direct-loading firmware ar3k/AthrBT_0x31010100.dfu
[ 11.177595] usb 1-1.2: firmware: direct-loading firmware ar3k/ramps_0x31010100_40.dfu
[ 11.183585] usbcore: registered new interface driver ath3k
[ 11.222140] usb 1-1.2: USB disconnect, device number 4
[ 11.302373] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.446877] usb 1-1.2: new full-speed USB device number 6 using ehci-pci
[ 11.668230] audit: type=1400 audit(1601565986.711:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=678 comm="apparmor_parser"
[ 11.668238] audit: type=1400 audit(1601565986.711:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=678 comm="apparmor_parser"
[ 11.675866] audit: type=1400 audit(1601565986.719:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=679 comm="apparmor_parser"
[ 11.675871] audit: type=1400 audit(1601565986.719:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=679 comm="apparmor_parser"
[ 11.675873] audit: type=1400 audit(1601565986.719:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=679 comm="apparmor_parser"
[ 11.750208] audit: type=1400 audit(1601565986.791:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=683 comm="apparmor_parser"
[ 11.806742] audit: type=1400 audit(1601565986.847:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=684 comm="apparmor_parser"
[ 11.811830] audit: type=1400 audit(1601565986.855:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=680 comm="apparmor_parser"
[ 11.811835] audit: type=1400 audit(1601565986.855:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=680 comm="apparmor_parser"
[ 11.811837] audit: type=1400 audit(1601565986.855:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=680 comm="apparmor_parser"
[ 14.056214] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.056217] Bluetooth: BNEP filters: protocol multicast
[ 14.056224] Bluetooth: BNEP socket layer initialized
[ 16.808410] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=3490, bcdDevice= 0.02
[ 16.808417] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 17.946839] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[ 17.946954] Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 18.067828] r8169 0000:02:00.0 enp2s0: Link is Down
[ 21.470209] Lockdown: Xorg: raw io port access is restricted; see https://wiki.debian.org/SecureBoot
[ 22.057560] wlp1s0: authenticate with 24:7f:20:ba:9d:48
[ 22.071198] wlp1s0: send auth to 24:7f:20:ba:9d:48 (try 1/3)
[ 22.073820] wlp1s0: authenticated
[ 22.074804] wlp1s0: associate with 24:7f:20:ba:9d:48 (try 1/3)
[ 22.080600] wlp1s0: RX AssocResp from 24:7f:20:ba:9d:48 (capab=0x431 status=0 aid=5)
[ 22.080703] wlp1s0: associated
[ 22.080790] ath: EEPROM regdomain: 0x80fa
[ 22.080791] ath: EEPROM indicates we should expect a country code
[ 22.080792] ath: doing EEPROM country->regdmn map search
[ 22.080793] ath: country maps to regdmn code: 0x37
[ 22.080794] ath: Country alpha2 being used: FR
[ 22.080794] ath: Regpair used: 0x37
[ 22.080796] ath: regdomain 0x80fa dynamically updated by country element
[ 22.263940] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 26.924628] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53021 DF PROTO=UDP SPT=50421 DPT=50001 LEN=157
[ 26.925548] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53022 DF PROTO=UDP SPT=56030 DPT=50001 LEN=157
[ 26.928667] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53023 DF PROTO=UDP SPT=58450 DPT=50002 LEN=157
[ 26.928931] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53024 DF PROTO=UDP SPT=40478 DPT=50002 LEN=157
[ 26.931474] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53025 DF PROTO=UDP SPT=60194 DPT=50003 LEN=157
[ 26.931642] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53026 DF PROTO=UDP SPT=56517 DPT=50003 LEN=157
[ 27.018824] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1. Priority:50 extents:10 across:2490364k FS
[ 27.646988] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 27.734142] ata1.00: configured for UDMA/133
[ 27.935948] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53141 DF PROTO=UDP SPT=43990 DPT=50001 LEN=157
[ 27.936019] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53142 DF PROTO=UDP SPT=60719 DPT=50001 LEN=157
[ 27.939175] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53143 DF PROTO=UDP SPT=53871 DPT=50002 LEN=157
[ 27.939785] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=192.168.1.14 DST=239.255.102.18 LEN=177 TOS=0x00 PREC=0x00 TTL=1 ID=53144 DF PROTO=UDP SPT=43565 DPT=50002 LEN=157
[ 32.226285] fuse: init (API version 7.31)
[ 44.851579] Bluetooth: RFCOMM TTY layer initialized
[ 44.851587] Bluetooth: RFCOMM socket layer initialized
[ 44.851600] Bluetooth: RFCOMM ver 1.11
[ 54.209568] logitech-hidpp-device 0003:046D:4008.0003: HID++ 2.0 device connected.
[ 59.955702] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:24:7f:20:ba:9d:48:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 99.889627] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:24:7f:20:ba:9d:48:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 104.498093] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:fb:24:7f:20:ba:9d:48:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2