Freeze après réinstall Debian

tlax38 · 18-05-2018 12:38:23

Bonjour à tous,
j'ai réinstallé cette semaine Debian stretch, j'ai paramétré comme il faut les sources.list (je crois), j'ai installé le pilote libre de ma Nvidia avec ce tuto: https://debian-facile.org/doc:materiel: … ia:optimus, mais j'ai pourtant un problème qui est que quand mon PC freeze très facilement; par exemple, il suffit que je regarde une vidéo et qu'en même temps je surfe sur le web pour que je sois obligé de redémarrer mon PC.
D'avance merci pour votre aide, je suis à votre disposition pour toute demande d'information.

Debian Alain · 18-05-2018 12:52:56

salut tlax38 .

n'oublies pas de remplir ton profil .

pour t'aider ce sera plus facile .

déjà quel type de pc : portable / tour ?

quel proc. / ram ?

quelle marque de pc ?

quelle carte video marque / type ?

Dernière modification par Debian Alain (18-05-2018 12:55:02)

tlax38 · 18-05-2018 13:19:55

Ok j'ai mis à jour mon profil.

èfpé · 18-05-2018 13:30:42

Bonjour,

Toujours le même portable (MSI GE72 2QC Apache) ? et après installation de bumblebee quid de :

optirun glxgears

Probable souci, le GPU GeForce GTX 960M (Maxwell) non pris en charge par nouveau.

tlax38 · 18-05-2018 13:58:46

root@tlax38-PC:/home/tlax38# optirun glxgears

[ 5675.389259] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 5675.389290] [ERROR]Aborting because fallback start is disabled.

root@tlax38-PC:/home/tlax38#

èfpé · 18-05-2018 14:12:42

Re-,

OK ; et donc ? comme tu as pu le constater cette erreur est envisagée dans le tuto que tu as suivi.

tlax38 · 18-05-2018 14:57:57

Hmm... en effet. Je dois reconnaître que je n'ai pas suivi le tuto jusqu'à la fin

Bon, après avoir résolu ce message d'erreur, il m'en est apparu un autre:

root@tlax38-PC:/home/tlax38/Téléchargements# optirun glxgears

 

[ 8844.409132] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Unknown chipset: NV117

[ 8844.409172] [ERROR]Aborting because fallback start is disabled.

Et celui-ci ne se trouve pas dans la liste que contient la page.

èfpé · 18-05-2018 15:12:42

Re-,

OK ; il semble que l'hypothèse du post #4 est validée, il y a d'ailleurs un avertissement à ce sujet...

Les portables MSI semblent relativement coriaces, Kurlrip en a bavé avec le GE73VR 7RF Raider.

anonyme · 18-05-2018 15:21:55

Bonjour

tu a installé le firmware ?

apt-get install firmware-misc-nonfree

 

nota : sur un pc de bureau c'est utile avec une GTX960 ( NVIDIA:5 GM206 [GeForce GTX 960] 2308)
mais aucune garantie pour un portable (960M)

dans le log de X

NVIDIA(0): NVIDIA GPU GeForce GTX 960 (GM206-A) at PCI:1:0:0 (GPU-0)

 

ceci => produit: GM107M [GeForce GTX 860M]

comme GM107 me parle j'ai cherché dans ma collection => NVIDIA:4 GM107 [GeForce GTX 750 Ti] 1306

tu a bien détecté ton gpu nvidia ?
ps: bon les portables pas mon truc

dans ta description tu donne ceci => CG 3D: NVIDIA GM107M Geforce GTX 960M

nota : pour la petite histoire , le GM107 a équipé la serie gtx7xx sur les 750 et 750TI , série7xx qui a l'origine est du "kepler"
mais bon les constructeur font n'importe quoi pour les gammes , donc il vaut mieux travailler avec le numéro de chipset

Dernière modification par anonyme (18-05-2018 15:43:18)

tlax38 · 18-05-2018 15:43:03

anonyme a écrit :

Bonjour

tu a installé le firmware ?

Je viens de le faire suite à ton message mais je reste avec le même message d'erreur.

anonyme · 18-05-2018 15:46:32

désolé , ce que j'ai trouvé pour le GM107M c'est pas bien bon

il te reste le driver propriétaire avec bumblebee (pour avoir les DRM qui se charge correctement )
ps: ou tenter un noyau plus récent

si tu peu poster le retour de cette commande

journalctl -r -p err

 

voir ce que renvoie "nouveau" comme erreurs

ps: précisé le bureau que tu utilise ? (gnome ,wayland , X etc .... ) peut donner des informations complémentaires
le contenu du log de X peut etre aussi ? (bien que sans DRM du noyau le résultat soit prévisible ).

Dernière modification par anonyme (18-05-2018 16:05:09)

tlax38 · 18-05-2018 16:12:51

anonyme a écrit :

désolé , ce que j'ai trouvé pour le GM107M c'est pas bien bon
il te reste le driver propriétaire avec bumblebee (pour avoir les DRM qui se charge correctement )
ps: ou tenter un noyau plus récent

si tu peu poster le retour de cette commande

journalctl -r -p err

voir ce que renvoie "nouveau" comme erreurs

ps: précisé le bureau que tu utilise ? (gnome ,wayland , X etc .... ) peut donner des informations complémentaires
le contenu du log de X peut etre aussi ? (bien que sans DRM du noyau le résultat soit prévisible ).

root@tlax38-PC:/home/tlax38/Téléchargements# journalctl -r -p err

mai 18 16:53:45 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 16:41:28 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 16:29:03 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 15:50:58 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 15:47:27 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 15:41:35 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 14:58:09 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 14:21:55 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 14:10:57 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 14:03:53 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:43:55 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:40:01 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:30:35 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:27:39 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:24:49 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:24:34 tlax38-PC bluetoothd[578]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)

mai 18 13:24:30 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:24:17 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:23:59 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 18 13:23:51 tlax38-PC bluetoothd[578]: sap-server: Operation not permitted (1)

mai 18 13:23:51 tlax38-PC bluetoothd[578]: Sap driver initialization failed.

mai 18 13:23:51 tlax38-PC bluetoothd[578]: Failed to obtain handles for "Service Changed" characteristic

mai 18 13:23:50 tlax38-PC avahi-daemon[593]: chroot.c: open() failed: No such file or directory

mai 18 13:23:45 tlax38-PC kernel: nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid

mai 18 13:23:45 tlax38-PC kernel: nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid

mai 18 13:23:45 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1a40822c)

mai 18 13:23:45 tlax38-PC kernel: iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-3160-17.ucode (-2)

mai 18 13:23:45 tlax38-PC kernel: Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.7.bseq

mai 18 13:23:45 tlax38-PC kernel: bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.bseq (-2)

mai 18 13:23:45 tlax38-PC kernel: Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq(-2)

mai 18 13:23:45 tlax38-PC kernel: bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq (-2)

Le contenu du log de X, je l'obtiens comment?

èfpé · 18-05-2018 16:46:42

@tlax38,

cat /home/tlax38/.local/share/xorg/Xorg.0.log

Le bureau étant GNOME. Note que l'information figure dans un de tes fils précédents...

Dernière modification par èfpé (19-05-2018 01:16:42)

tlax38 · 18-05-2018 16:53:09

tlax38@tlax38-PC:~$ cat /home/$USER/.local/share/xorg/Xorg.0.log

[    56.708] (--) Log file renamed from "/home/tlax38/.local/share/xorg/Xorg.pid-960.log" to "/home/tlax38/.local/share/xorg/Xorg.0.log"

[    56.709] 

X.Org X Server 1.19.2

Release Date: 2017-03-02

[    56.709] X Protocol Version 11, Revision 0

[    56.709] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian

[    56.709] Current Operating System: Linux tlax38-PC 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) x86_64

[    56.709] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=3464713b-66b1-4efc-a130-189b39d8f32f ro quiet

[    56.709] Build Date: 16 October 2017  08:19:45AM

[    56.709] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) 

[    56.709] Current version of pixman: 0.34.0

[    56.709]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    56.709] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    56.709] (==) Log file: "/home/tlax38/.local/share/xorg/Xorg.0.log", Time: Fri May 18 13:24:31 2018

[    56.760] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    56.803] (==) No Layout section.  Using the first Screen section.

[    56.803] (==) No screen section available. Using defaults.

[    56.803] (**) |-->Screen "Default Screen Section" (0)

[    56.803] (**) |   |-->Monitor "<default monitor>"

[    56.804] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    56.804] (==) Automatically adding devices

[    56.804] (==) Automatically enabling devices

[    56.804] (==) Automatically adding GPU devices

[    56.804] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    56.804] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    56.804]  Entry deleted from font path.

[    56.804] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    56.804] (==) ModulePath set to "/usr/lib/xorg/modules"

[    56.804] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    56.804] (II) Loader magic: 0x55e85c890e00

[    56.804] (II) Module ABI versions:

[    56.804]  X.Org ANSI C Emulation: 0.4

[    56.804]  X.Org Video Driver: 23.0

[    56.804]  X.Org XInput driver : 24.1

[    56.804]  X.Org Server Extension : 10.0

[    56.805] (++) using VT number 2

[    56.807] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32

[    56.808] (II) xfree86: Adding drm device (/dev/dri/card1)

[    56.808] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0

[    56.808] (II) xfree86: Adding drm device (/dev/dri/card0)

[    56.809] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0

[    56.810] (--) PCI:*(0:0:2:0) 8086:1612:1462:1139 rev 10, Mem @ 0xa1000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072

[    56.810] (--) PCI: (0:1:0:0) 10de:139b:1462:1139 rev 162, Mem @ 0xa2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288

[    56.810] (II) LoadModule: "glx"

[    56.884] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    56.913] (II) Module glx: vendor="X.Org Foundation"

[    56.913]  compiled for 1.19.2, module version = 1.0.0

[    56.913]  ABI class: X.Org Server Extension, version 10.0

[    56.913] (==) Matched nouveau as autoconfigured driver 0

[    56.913] (==) Matched nv as autoconfigured driver 1

[    56.913] (==) Matched modesetting as autoconfigured driver 2

[    56.913] (==) Matched fbdev as autoconfigured driver 3

[    56.913] (==) Matched vesa as autoconfigured driver 4

[    56.913] (==) Assigned the driver to the xf86ConfigLayout

[    56.913] (II) LoadModule: "nouveau"

[    56.946] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so

[    56.970] (II) Module nouveau: vendor="X.Org Foundation"

[    56.970]  compiled for 1.19.3, module version = 1.0.13

[    56.970]  Module class: X.Org Video Driver

[    56.970]  ABI class: X.Org Video Driver, version 23.0

[    56.970] (II) LoadModule: "nv"

[    56.970] (WW) Warning, couldn't open module nv

[    56.970] (II) UnloadModule: "nv"

[    56.970] (II) Unloading nv

[    56.970] (EE) Failed to load module "nv" (module does not exist, 0)

[    56.970] (II) LoadModule: "modesetting"

[    56.970] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    56.971] (II) Module modesetting: vendor="X.Org Foundation"

[    56.971]  compiled for 1.19.2, module version = 1.19.2

[    56.971]  Module class: X.Org Video Driver

[    56.971]  ABI class: X.Org Video Driver, version 23.0

[    56.971] (II) LoadModule: "fbdev"

[    56.971] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    56.971] (II) Module fbdev: vendor="X.Org Foundation"

[    56.971]  compiled for 1.19.0, module version = 0.4.4

[    56.971]  Module class: X.Org Video Driver

[    56.971]  ABI class: X.Org Video Driver, version 23.0

[    56.971] (II) LoadModule: "vesa"

[    56.971] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    56.972] (II) Module vesa: vendor="X.Org Foundation"

[    56.972]  compiled for 1.19.0, module version = 2.3.4

[    56.972]  Module class: X.Org Video Driver

[    56.972]  ABI class: X.Org Video Driver, version 23.0

[    56.972] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400

[    56.972] (II) NOUVEAU driver for NVIDIA chipset families :

[    56.972]  RIVA TNT        (NV04)

[    56.972]  RIVA TNT2       (NV05)

[    56.972]  GeForce 256     (NV10)

[    56.972]  GeForce 2       (NV11, NV15)

[    56.972]  GeForce 4MX     (NV17, NV18)

[    56.972]  GeForce 3       (NV20)

[    56.972]  GeForce 4Ti     (NV25, NV28)

[    56.972]  GeForce FX      (NV3x)

[    56.972]  GeForce 6       (NV4x)

[    56.972]  GeForce 7       (G7x)

[    56.972]  GeForce 8       (G8x)

[    56.972]  GeForce GTX 200 (NVA0)

[    56.972]  GeForce GTX 400 (NVC0)

[    56.972] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    56.972] (II) FBDEV: driver for framebuffer: fbdev

[    56.972] (II) VESA: driver for VESA chipsets: vesa

[    56.972] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)

[    56.972] (II) [drm] nouveau interface version: 1.3.1

[    56.972] (EE) Unknown chipset: NV117

[    56.972] (II) modeset(0): using drv /dev/dri/card0

[    56.972] (II) modeset(G0): using drv /dev/dri/card1

[    56.972] (WW) Falling back to old probe method for fbdev

[    56.972] (II) Loading sub module "fbdevhw"

[    56.972] (II) LoadModule: "fbdevhw"

[    56.972] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    56.973] (II) Module fbdevhw: vendor="X.Org Foundation"

[    56.973]  compiled for 1.19.2, module version = 0.0.2

[    56.973]  ABI class: X.Org Video Driver, version 23.0

[    56.973] (WW) Falling back to old probe method for vesa

[    56.973] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support

[    56.973] (II) modeset(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    56.973] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[    56.973] (==) modeset(0): RGB weight 888

[    56.973] (==) modeset(0): Default visual is TrueColor

[    56.973] (II) Loading sub module "glamoregl"

[    56.973] (II) LoadModule: "glamoregl"

[    56.973] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    56.982] (II) Module glamoregl: vendor="X.Org Foundation"

[    56.982]  compiled for 1.19.2, module version = 1.0.0

[    56.982]  ABI class: X.Org ANSI C Emulation, version 0.4

[    56.982] (II) glamor: OpenGL accelerated X.org driver based.

[    56.988] (II) glamor: EGL version 1.4 (DRI2):

[    56.989] (II) modeset(0): glamor initialized

[    56.990] (II) modeset(0): Output eDP-1 has no monitor section

[    56.990] (II) modeset(0): Output DP-1 has no monitor section

[    56.991] (II) modeset(0): Output HDMI-1 has no monitor section

[    56.995] (II) modeset(0): Output HDMI-2 has no monitor section

[    56.996] (II) modeset(0): EDID for output eDP-1

[    56.996] (II) modeset(0): Manufacturer: CMN  Model: 1735  Serial#: 0

[    56.996] (II) modeset(0): Year: 2014  Week: 39

[    56.996] (II) modeset(0): EDID Version: 1.4

[    56.996] (II) modeset(0): Digital Display Input

[    56.996] (II) modeset(0): 6 bits per channel

[    56.996] (II) modeset(0): Digital interface is DisplayPort

[    56.996] (II) modeset(0): Max Image Size [cm]: horiz.: 38  vert.: 22

[    56.996] (II) modeset(0): Gamma: 2.20

[    56.996] (II) modeset(0): No DPMS capabilities specified

[    56.996] (II) modeset(0): Supported color encodings: RGB 4:4:4 

[    56.996] (II) modeset(0): First detailed timing is preferred mode

[    56.996] (II) modeset(0): Preferred mode is native pixel format and refresh rate

[    56.996] (II) modeset(0): redX: 0.640 redY: 0.333   greenX: 0.313 greenY: 0.613

[    56.996] (II) modeset(0): blueX: 0.154 blueY: 0.060   whiteX: 0.313 whiteY: 0.329

[    56.996] (II) modeset(0): Manufacturer's mask: 0

[    56.996] (II) modeset(0): Supported detailed timing:

[    56.996] (II) modeset(0): clock: 140.0 MHz   Image Size:  382 x 215 mm

[    56.996] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2102 h_border: 0

[    56.996] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1110 v_border: 0

[    56.996] (II) modeset(0):  N173HGE-E11

[    56.996] (II) modeset(0):  CMN

[    56.996] (II) modeset(0):  N173HGE-E11

[    56.996] (II) modeset(0): EDID (in hex):

[    56.996] (II) modeset(0):   00ffffffffffff000dae351700000000

[    56.996] (II) modeset(0):   271801049526167802d495a355509d27

[    56.996] (II) modeset(0):   0f505400000001010101010101010101

[    56.996] (II) modeset(0):   010101010101b03680b670381e403020

[    56.996] (II) modeset(0):   35007ed710000018000000fe004e3137

[    56.996] (II) modeset(0):   334847452d4531310a20000000fe0043

[    56.996] (II) modeset(0):   4d4e0a202020202020202020000000fe

[    56.996] (II) modeset(0):   004e3137334847452d4531310a20009c

[    56.996] (II) modeset(0): Printing probed modes for output eDP-1

[    56.996] (II) modeset(0): Modeline "1920x1080"x60.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[    56.996] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)

[    56.996] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)

[    56.996] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)

[    56.996] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)

[    56.996] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)

[    56.996] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)

[    56.996] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)

[    56.996] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)

[    56.996] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)

[    56.996] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)

[    56.996] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)

[    56.996] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)

[    56.996] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)

[    56.996] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)

[    56.996] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)

[    56.996] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)

[    56.996] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)

[    56.996] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)

[    56.996] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)

[    56.996] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)

[    56.996] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)

[    56.996] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)

[    56.996] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)

[    56.996] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)

[    56.996] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)

[    56.996] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)

[    56.996] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)

[    56.996] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)

[    56.996] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[    56.996] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)

[    56.996] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)

[    56.996] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)

[    56.996] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)

[    56.996] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)

[    56.996] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)

[    56.996] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)

[    56.996] (II) modeset(0): EDID for output DP-1

[    56.997] (II) modeset(0): EDID for output HDMI-1

[    57.001] (II) modeset(0): EDID for output HDMI-2

[    57.001] (II) modeset(0): Output eDP-1 connected

[    57.001] (II) modeset(0): Output DP-1 disconnected

[    57.001] (II) modeset(0): Output HDMI-1 disconnected

[    57.001] (II) modeset(0): Output HDMI-2 disconnected

[    57.001] (II) modeset(0): Using exact sizes for initial modes

[    57.001] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0

[    57.001] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[    57.001] (==) modeset(0): DPI set to (96, 96)

[    57.001] (II) Loading sub module "fb"

[    57.001] (II) LoadModule: "fb"

[    57.001] (II) Loading /usr/lib/xorg/modules/libfb.so

[    57.002] (II) Module fb: vendor="X.Org Foundation"

[    57.002]  compiled for 1.19.2, module version = 1.0.0

[    57.002]  ABI class: X.Org ANSI C Emulation, version 0.4

[    57.017] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32

[    57.017] (==) modeset(G0): RGB weight 888

[    57.017] (==) modeset(G0): Default visual is TrueColor

[    57.017] (II) Loading sub module "glamoregl"

[    57.017] (II) LoadModule: "glamoregl"

[    57.017] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    57.017] (II) Module glamoregl: vendor="X.Org Foundation"

[    57.017]  compiled for 1.19.2, module version = 1.0.0

[    57.017]  ABI class: X.Org ANSI C Emulation, version 0.4

[    57.017] (II) glamor: OpenGL accelerated X.org driver based.

[    57.169] (II) glamor: EGL version 1.4 (DRI2):

[    57.231] (II) modeset(G0): glamor initialized

[    57.231] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)

[    57.231] (==) modeset(G0): DPI set to (96, 96)

[    57.231] (II) Loading sub module "fb"

[    57.231] (II) LoadModule: "fb"

[    57.232] (II) Loading /usr/lib/xorg/modules/libfb.so

[    57.232] (II) Module fb: vendor="X.Org Foundation"

[    57.232]  compiled for 1.19.2, module version = 1.0.0

[    57.232]  ABI class: X.Org ANSI C Emulation, version 0.4

[    57.232] (II) UnloadModule: "fbdev"

[    57.232] (II) Unloading fbdev

[    57.232] (II) UnloadSubModule: "fbdevhw"

[    57.232] (II) Unloading fbdevhw

[    57.232] (II) UnloadModule: "vesa"

[    57.232] (II) Unloading vesa

[    57.232] (==) Depth 24 pixmap format is 32 bpp

[    57.277] (==) modeset(G0): Backing store enabled

[    57.277] (==) modeset(G0): Silken mouse enabled

[    57.278] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    57.305] (==) modeset(G0): DPMS enabled

[    57.305] (II) modeset(G0): [DRI2] Setup complete

[    57.305] (II) modeset(G0): [DRI2]   DRI driver: nouveau

[    57.305] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau

[    57.360] (==) modeset(0): Backing store enabled

[    57.360] (==) modeset(0): Silken mouse enabled

[    57.360] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    57.360] (==) modeset(0): DPMS enabled

[    57.360] (II) modeset(0): [DRI2] Setup complete

[    57.360] (II) modeset(0): [DRI2]   DRI driver: i965

[    57.360] (II) modeset(0): [DRI2]   VDPAU driver: i965

[    57.360] (--) RandR disabled

[    57.363] (II) SELinux: Disabled on system

[    57.366] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    57.366] (II) AIGLX: enabled GLX_ARB_create_context

[    57.366] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    57.366] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile

[    57.366] (II) AIGLX: enabled GLX_INTEL_swap_event

[    57.366] (II) AIGLX: enabled GLX_SGI_swap_control

[    57.366] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[    57.366] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[    57.366] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float

[    57.366] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    57.366] (II) AIGLX: enabled GLX_ARB_create_context_robustness

[    57.366] (II) AIGLX: Loaded and initialized i965

[    57.366] (II) GLX: Initialized DRI2 GL provider for screen 0

[    57.367] (II) modeset(G0): Damage tracking initialized

[    57.369] (II) modeset(0): Damage tracking initialized

[    57.369] (II) modeset(0): Setting screen physical size to 508 x 285

[    57.402] (II) config/udev: Adding input device Power Button (/dev/input/event6)

[    57.402] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    57.402] (II) LoadModule: "libinput"

[    57.402] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    57.404] (II) Module libinput: vendor="X.Org Foundation"

[    57.404]  compiled for 1.19.0, module version = 0.23.0

[    57.404]  Module class: X.Org XInput Driver

[    57.404]  ABI class: X.Org XInput driver, version 24.1

[    57.404] (II) Using input driver 'libinput' for 'Power Button'

[    57.405] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 26 paused 0

[    57.405] (**) Power Button: always reports core events

[    57.405] (**) Option "Device" "/dev/input/event6"

[    57.405] (**) Option "_source" "server/udev"

[    57.405] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard

[    57.405] (II) input device 'Power Button', /dev/input/event6 is a keyboard

[    57.405] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"

[    57.405] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    57.405] (**) Option "xkb_model" "pc105"

[    57.405] (**) Option "xkb_layout" "fr"

[    57.405] (**) Option "xkb_variant" "latin9"

[    57.417] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard

[    57.417] (II) input device 'Power Button', /dev/input/event6 is a keyboard

[    57.417] (II) config/udev: Adding input device Video Bus (/dev/input/event8)

[    57.417] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    57.417] (II) Using input driver 'libinput' for 'Video Bus'

[    57.418] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 29 paused 0

[    57.418] (**) Video Bus: always reports core events

[    57.418] (**) Option "Device" "/dev/input/event8"

[    57.418] (**) Option "_source" "server/udev"

[    57.418] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard

[    57.418] (II) input device 'Video Bus', /dev/input/event8 is a keyboard

[    57.418] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"

[    57.418] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    57.418] (**) Option "xkb_model" "pc105"

[    57.418] (**) Option "xkb_layout" "fr"

[    57.418] (**) Option "xkb_variant" "latin9"

[    57.418] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard

[    57.419] (II) input device 'Video Bus', /dev/input/event8 is a keyboard

[    57.419] (II) config/udev: Adding input device Video Bus (/dev/input/event9)

[    57.419] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    57.419] (II) Using input driver 'libinput' for 'Video Bus'

[    57.419] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 30 paused 0

[    57.419] (**) Video Bus: always reports core events

[    57.419] (**) Option "Device" "/dev/input/event9"

[    57.419] (**) Option "_source" "server/udev"

[    57.420] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard

[    57.420] (II) input device 'Video Bus', /dev/input/event9 is a keyboard

[    57.420] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input10/event9"

[    57.420] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)

[    57.420] (**) Option "xkb_model" "pc105"

[    57.420] (**) Option "xkb_layout" "fr"

[    57.420] (**) Option "xkb_variant" "latin9"

[    57.420] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard

[    57.420] (II) input device 'Video Bus', /dev/input/event9 is a keyboard

[    57.420] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)

[    57.421] (II) No input driver specified, ignoring this device.

[    57.421] (II) This device may have been added with another device file.

[    57.421] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[    57.421] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    57.421] (II) Using input driver 'libinput' for 'Power Button'

[    57.421] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 31 paused 0

[    57.421] (**) Power Button: always reports core events

[    57.421] (**) Option "Device" "/dev/input/event5"

[    57.421] (**) Option "_source" "server/udev"

[    57.421] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    57.421] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    57.421] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"

[    57.421] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)

[    57.421] (**) Option "xkb_model" "pc105"

[    57.422] (**) Option "xkb_layout" "fr"

[    57.422] (**) Option "xkb_variant" "latin9"

[    57.422] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    57.422] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    57.422] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)

[    57.422] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[    57.422] (II) Using input driver 'libinput' for 'Sleep Button'

[    57.423] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0

[    57.423] (**) Sleep Button: always reports core events

[    57.423] (**) Option "Device" "/dev/input/event4"

[    57.423] (**) Option "_source" "server/udev"

[    57.423] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard

[    57.423] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard

[    57.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"

[    57.423] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)

[    57.423] (**) Option "xkb_model" "pc105"

[    57.423] (**) Option "xkb_layout" "fr"

[    57.423] (**) Option "xkb_variant" "latin9"

[    57.423] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard

[    57.423] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard

[    57.424] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)

[    57.424] (II) No input driver specified, ignoring this device.

[    57.424] (II) This device may have been added with another device file.

[    57.424] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)

[    57.424] (II) No input driver specified, ignoring this device.

[    57.424] (II) This device may have been added with another device file.

[    57.424] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)

[    57.424] (II) No input driver specified, ignoring this device.

[    57.424] (II) This device may have been added with another device file.

[    57.425] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)

[    57.425] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"

[    57.425] (II) Using input driver 'libinput' for 'USB Optical Mouse'

[    57.484] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0

[    57.484] (**) USB Optical Mouse: always reports core events

[    57.484] (**) Option "Device" "/dev/input/event1"

[    57.484] (**) Option "_source" "server/udev"

[    57.485] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse

[    57.485] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps

[    57.485] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:1BCF:0007.0001/input/input3/event1"

[    57.485] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)

[    57.485] (**) Option "AccelerationScheme" "none"

[    57.485] (**) USB Optical Mouse: (accel) selected scheme none/0

[    57.485] (**) USB Optical Mouse: (accel) acceleration factor: 2.000

[    57.485] (**) USB Optical Mouse: (accel) acceleration threshold: 4

[    57.486] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse

[    57.486] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps

[    57.487] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)

[    57.487] (II) No input driver specified, ignoring this device.

[    57.487] (II) This device may have been added with another device file.

[    57.487] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)

[    57.487] (II) No input driver specified, ignoring this device.

[    57.487] (II) This device may have been added with another device file.

[    57.488] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)

[    57.488] (II) No input driver specified, ignoring this device.

[    57.488] (II) This device may have been added with another device file.

[    57.488] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)

[    57.488] (II) No input driver specified, ignoring this device.

[    57.488] (II) This device may have been added with another device file.

[    57.488] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[    57.489] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[    57.489] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[    57.489] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 34 paused 0

[    57.489] (**) AT Translated Set 2 keyboard: always reports core events

[    57.489] (**) Option "Device" "/dev/input/event0"

[    57.489] (**) Option "_source" "server/udev"

[    57.489] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[    57.489] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[    57.489] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[    57.489] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)

[    57.489] (**) Option "xkb_model" "pc105"

[    57.489] (**) Option "xkb_layout" "fr"

[    57.489] (**) Option "xkb_variant" "latin9"

[    57.490] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[    57.490] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[    57.490] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)

[    57.490] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"

[    57.490] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'

[    57.490] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0

[    57.490] (**) SynPS/2 Synaptics TouchPad: always reports core events

[    57.490] (**) Option "Device" "/dev/input/event2"

[    57.491] (**) Option "_source" "server/udev"

[    57.491] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is tagged by udev as: Touchpad

[    57.491] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is a touchpad

[    57.491] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"

[    57.491] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)

[    57.491] (**) Option "AccelerationScheme" "none"

[    57.491] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0

[    57.491] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000

[    57.491] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4

[    57.491] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is tagged by udev as: Touchpad

[    57.491] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is a touchpad

[    57.492] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)

[    57.492] (II) No input driver specified, ignoring this device.

[    57.492] (II) This device may have been added with another device file.

[    57.492] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)

[    57.492] (II) No input driver specified, ignoring this device.

[    57.492] (II) This device may have been added with another device file.

[    57.492] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event16)

[    57.492] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"

[    57.492] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'

[    57.493] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 36 paused 0

[    57.493] (**) MSI WMI hotkeys: always reports core events

[    57.493] (**) Option "Device" "/dev/input/event16"

[    57.493] (**) Option "_source" "server/udev"

[    57.493] (II) input device 'MSI WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard

[    57.493] (II) input device 'MSI WMI hotkeys', /dev/input/event16 is a keyboard

[    57.493] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event16"

[    57.493] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 14)

[    57.493] (**) Option "xkb_model" "pc105"

[    57.493] (**) Option "xkb_layout" "fr"

[    57.493] (**) Option "xkb_variant" "latin9"

[    57.493] (II) input device 'MSI WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard

[    57.493] (II) input device 'MSI WMI hotkeys', /dev/input/event16 is a keyboard

[    59.735] (II) modeset(0): EDID vendor "CMN", prod id 5941

[    59.735] (II) modeset(0): Printing DDC gathered Modelines:

[    59.735] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[    63.950] (II) modeset(0): EDID vendor "CMN", prod id 5941

[    63.950] (II) modeset(0): Printing DDC gathered Modelines:

[    63.950] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[   986.761] (II) modeset(0): EDID vendor "CMN", prod id 5941

[   986.761] (II) modeset(0): Printing DDC gathered Modelines:

[   986.761] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[  2321.684] (II) Axis 0 value 1220 is outside expected range [1260, 5917]

See https://wayland.freedesktop.org/libinput/doc/1.6.3//absolute_coordinate_ranges.html for details

[  2842.583] (II) modeset(0): EDID vendor "CMN", prod id 5941

[  2842.583] (II) modeset(0): Printing DDC gathered Modelines:

[  2842.583] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[ 11543.409] (II) Axis 0x1 value 1213 is outside expected range [1238, 4969]

See https://wayland.freedesktop.org/libinput/doc/1.6.3//absolute_coordinate_ranges.html for details

anonyme · 18-05-2018 17:07:59

suite a ceci

[    56.709] (==) Log file: "/home/tlax38/.local/share/xorg/Xorg.0.log", Time: Fri May 18 13:24:31 2018

 

tu a redémarré la machine après l'installation du firmware (vers 15H environ) , le log est de 13H environ

le gpu nvidia (nouveau) et gpu intel

[    57.232] (==) Depth 24 pixmap format is 32 bpp

[    57.277] (==) modeset(G0): Backing store enabled

[    57.277] (==) modeset(G0): Silken mouse enabled

[    57.278] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    57.305] (==) modeset(G0): DPMS enabled

[    57.305] (II) modeset(G0): [DRI2] Setup complete

[    57.305] (II) modeset(G0): [DRI2]   DRI driver: nouveau

[    57.305] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau

[    57.360] (==) modeset(0): Backing store enabled

[    57.360] (==) modeset(0): Silken mouse enabled

[    57.360] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    57.360] (==) modeset(0): DPMS enabled

[    57.360] (II) modeset(0): [DRI2] Setup complete

[    57.360] (II) modeset(0): [DRI2]   DRI driver: i965

[    57.360] (II) modeset(0): [DRI2]   VDPAU driver: i965

[    57.360] (--) RandR disabled

[    57.363] (II) SELinux: Disabled on system

[    57.366] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    57.366] (II) AIGLX: enabled GLX_ARB_create_context

[    57.366] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    57.366] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile

[    57.366] (II) AIGLX: enabled GLX_INTEL_swap_event

[    57.366] (II) AIGLX: enabled GLX_SGI_swap_control

[    57.366] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[    57.366] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[    57.366] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float

[    57.366] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    57.366] (II) AIGLX: enabled GLX_ARB_create_context_robustness

[    57.366] (II) AIGLX: Loaded and initialized i965

[    57.366] (II) GLX: Initialized DRI2 GL provider for screen 0

[    57.367] (II) modeset(G0): Damage tracking initialized

[    57.369] (II) modeset(0): Damage tracking initialized

[    57.369] (II) modeset(0): Setting screen physical size to 508 x 285

KMS prend en charge les deux a priori intel et nvidia (kernel mode setting)

les paquets xserver-xorg-video-intel et xserver-xorg-video-nouveau ne sont pas utiles , ils peuvent etre enlevés

en dehors d un bug de bumblebee , le souci est ici :

[    56.972] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)

[    56.972] (II) [drm] nouveau interface version: 1.3.1

[    56.972] (EE) Unknown chipset: NV117

et ici on voit bien que KMS est activé pour les deux gpu

[    56.972] (II) modeset(0): using drv /dev/dri/card0

[    56.972] (II) modeset(G0): using drv /dev/dri/card1

donc je te propose de retirer les deux paquets nommé ci dessus (intel et nouveau )et de redémarrer la machine

le serveur X charge ceci a chaque démarrage : (si tu est bien sous gnome classic ou gnome sous X (a confirmer) et pas Wayland )

[    56.913] (==) Matched nouveau as autoconfigured driver 0  => charge le paquet xserver-xorg-video-nouveau

[    56.913] (==) Matched nv as autoconfigured driver 1

[    56.913] (==) Matched modesetting as autoconfigured driver 2   => charge KMS (pour tous les gpu )

[    56.913] (==) Matched fbdev as autoconfigured driver 3

[    56.913] (==) Matched vesa as autoconfigured driver 4

ps: le paquet "intel" n'est pas chargé par X

nota : avec un noyau plus récent (backports) peut etre a tester

tu peu tester la commande "glxinfo -B" si tu a installé le paquet "mesa-utils"

ps: pour les messages de ton #12 (erreurs de nouveau ) j'ai pas d'explication , au vue du log de X les DRM de nouveau sont bien chargés
demande a ce qu on te donne une commande pour prendre dans le syslog ce qui correspond a "nouveau" et "drm"

pour finir , peut etre la fatigue , je trouve pas l'équivalent de ceci :

[    56.970] (II) UnloadModule: "nv"

[    56.970] (II) Unloading nv

pour nouveau (déchargé)

quelque chose comme ceci (de ma machine avec un driver nvidia)

[    12.118] (II) LoadModule: "nouveau"

[    12.118] (WW) Warning, couldn't open module nouveau

[    12.118] (II) UnloadModule: "nouveau"

[    12.118] (II) Unloading nouveau

[    12.118] (EE) Failed to load module "nouveau" (module does not exist, 0)

toujours été pénible bumblebee sur les portables
en plus je suppose qu'avant de réinstaller ça fonctionnait ?

Dernière modification par anonyme (18-05-2018 17:56:51)

tlax38 · 18-05-2018 19:10:22

Oui ça fonctionnait...
Pour ce qui est de ma session Gnome : c'est bien Gnome tout court qui est coché en ouverture de session, pas Gnome Classique, pas Wayland, pas Xsession.

anonyme · 18-05-2018 22:24:03

Si tu peu répondre aux questions de mon fil en #15
effectuer les commandes (et poster les retours si besoin )
installer peut etre les firmwares qui manquent ( voir le retour des erreurs ).
faire une recherche dans le log => /var/log/syslog (pour "drm" et "nouveau" ).

nota: garde le firmware-misc-nonfree , il est utile pour intel gpu et nouveau (parfois .... ).
vue que cela a déjà fonctionné , il doit etre possible de le refaire ........
ps: tu peu installer aussi le paquet "intel-microcode" pour ton CPU .

comme dit plus haut , voir ton ancien fil => https://debian-facile.org/viewtopic.php?id=21362
a priori a l'époque tu a trouvé une solution avec bumblebee et nouveau

Dernière modification par anonyme (18-05-2018 22:30:31)

tlax38 · 19-05-2018 09:48:55

les paquets xserver-xorg-video-intel et xserver-xorg-video-nouveau ne sont pas utiles , ils peuvent etre enlevés

donc je te propose de retirer les deux paquets nommé ci dessus (intel et nouveau )et de redémarrer la machine

C'est fait à l'instant, à la suite de quoi:

glxinfo -B

name of display: :0

display: :0  screen: 0

direct rendering: Yes

Extended renderer info (GLX_MESA_query_renderer):

    Vendor: Intel Open Source Technology Center (0x8086)

    Device: Mesa DRI Intel(R) HD Graphics 5600 (Broadwell GT2)  (0x1612)

    Version: 13.0.6

    Accelerated: yes

    Video memory: 3072MB

    Unified memory: yes

    Preferred profile: core (0x1)

    Max core profile version: 4.5

    Max compat profile version: 3.0

    Max GLES1 profile version: 1.1

    Max GLES[23] profile version: 3.1

OpenGL vendor string: Intel Open Source Technology Center

OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5600 (Broadwell GT2) 

OpenGL core profile version string: 4.5 (Core Profile) Mesa 13.0.6

OpenGL core profile shading language version string: 4.50

OpenGL core profile context flags: (none)

OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 13.0.6

OpenGL shading language version string: 1.30

OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.1 Mesa 13.0.6

OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10

demande a ce qu on te donne une commande pour prendre dans le syslog ce qui correspond a "nouveau" et "drm"

hmm d'accord... peux-tu me donner une commande pour prendre dans le syslog ce qui correspond à "nouveau" et "drm"? (j'ai bon?)
Je crois que dans ton #15 c'est tout ce que tu m'as demandé mais si j'ai oublié quelque chose, n'hésite pas à me le dire.

Debian Alain · 19-05-2018 10:07:47

sauf erreurs :

less /var/log/syslog | grep -i nouveau

less /var/log/syslog | grep -i drm 

Dernière modification par Debian Alain (19-05-2018 10:19:04)

tlax38 · 19-05-2018 10:14:01

Debian Alain a écrit :

sauf erreurs :

less /var/log/syslog | grep nouveau

less /var/log/syslog | grep drm

less /var/log/syslog | grep nouveau

May 19 08:24:08 tlax38-PC tracker-miner-f[1777]:   (Sparql buffer) Error in task 5 (file:///home/tlax38/Documents/A%20voir%20%C3%A0%20lire%20%C3%A0%20%C3%A9couter/Documentaires/Le%20monde%20en%20face%20-%20Fr5.2018-05-02%20-%20Le%20nouveau%20d%C3%A9sordre%20mondial%20(doc-Fr.2018)%20+%20d%C3%A9bat_clo2.mkv) of the array-update: UNIQUE constraint failed: nie:DataObject.nie:url (strerror of errno (not necessarily related): Ressource temporairement non disponible)

 

less /var/log/syslog | grep drm 

May 19 08:22:16 tlax38-PC kernel: [    8.569198] [drm] Initialized

May 19 08:22:16 tlax38-PC kernel: [    9.226387] [drm] Memory usable by graphics device = 4096M

May 19 08:22:16 tlax38-PC kernel: [    9.226388] [drm] Replacing VGA console driver

May 19 08:22:16 tlax38-PC kernel: [    9.232242] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

May 19 08:22:16 tlax38-PC kernel: [    9.232242] [drm] Driver supports precise vblank timestamp query.

May 19 08:22:16 tlax38-PC kernel: [    9.249637] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0

May 19 08:22:16 tlax38-PC kernel: [    9.256301] fbcon: inteldrmfb (fb0) is primary device

May 19 08:22:16 tlax38-PC kernel: [   10.384114] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

May 19 08:23:15 tlax38-PC /usr/lib/gdm3/gdm-x-session[1487]: (II) xfree86: Adding drm device (/dev/dri/card0)

May 19 10:20:54 tlax38-PC kernel: [    8.928114] [drm] Initialized

May 19 10:20:54 tlax38-PC kernel: [    9.944448] [drm] Memory usable by graphics device = 4096M

May 19 10:20:54 tlax38-PC kernel: [    9.944449] [drm] Replacing VGA console driver

May 19 10:20:54 tlax38-PC kernel: [    9.950280] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

May 19 10:20:54 tlax38-PC kernel: [    9.950281] [drm] Driver supports precise vblank timestamp query.

May 19 10:20:54 tlax38-PC kernel: [    9.965582] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0

May 19 10:20:54 tlax38-PC kernel: [    9.973113] fbcon: inteldrmfb (fb0) is primary device

May 19 10:20:54 tlax38-PC kernel: [   11.091679] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

May 19 10:21:37 tlax38-PC /usr/lib/gdm3/gdm-x-session[1059]: (II) xfree86: Adding drm device (/dev/dri/card0)

anonyme · 19-05-2018 10:17:01

Bonjour

tu peu faire aussi ceci

optirun glxinfo -B

 

pour avoir le retour pour la 960M (ce que tu a posté ci dessus pour intel )

pour "intel" tout va bien , pour "nouveau" a mon avis la commande n'est pas bonne.

tu peu aussi refaire un

journalctl -r -p err

 

pour répondre a ta question , depuis hier tu a redémarré la machine ?

Dernière modification par anonyme (19-05-2018 10:27:02)

tlax38 · 19-05-2018 10:28:31

optirun glxinfo -B

[ 3995.694129] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)

[ 3995.694159] [ERROR]Aborting because fallback start is disabled.

root@tlax38-PC:/home/tlax38#

 journalctl -r -p err

-- Logs begin at Sat 2018-05-19 10:20:42 CEST, end at Sat 2018-05-19 11:27:44 CEST. --

mai 19 11:27:11 tlax38-PC kernel: nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid

mai 19 11:27:11 tlax38-PC kernel: nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid

mai 19 11:27:11 tlax38-PC kernel: nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)

mai 19 10:21:40 tlax38-PC bluetoothd[653]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)

mai 19 10:21:04 tlax38-PC minissdpd[898]: setsockopt(udp, IP_ADD_MEMBERSHIP)(0.0.0.0): No such device

mai 19 10:20:54 tlax38-PC bluetoothd[653]: sap-server: Operation not permitted (1)

mai 19 10:20:54 tlax38-PC bluetoothd[653]: Sap driver initialization failed.

mai 19 10:20:54 tlax38-PC bluetoothd[653]: Failed to obtain handles for "Service Changed" characteristic

mai 19 10:20:52 tlax38-PC avahi-daemon[648]: chroot.c: open() failed: No such file or directory

mai 19 10:20:48 tlax38-PC kernel: Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.7.bseq

mai 19 10:20:48 tlax38-PC kernel: bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.bseq (-2)

mai 19 10:20:48 tlax38-PC kernel: Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq(-2)

mai 19 10:20:48 tlax38-PC kernel: bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq (-2)

mai 19 10:20:46 tlax38-PC kernel: iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-3160-17.ucode (-2)

anonyme · 19-05-2018 10:37:52

installe iwlwifi

apt-get install firmware-iwlwifi

 

et redémarre la machine

puis

journalctl -r -p err

 

bumblebee ne fonctionne pas , erreur sur "nouveau" pas de module chargé.
bumblebee ne supporte pas KMS ? , le log de X nous dit "ok" pour nouveau

Dernière modification par anonyme (19-05-2018 10:51:53)

tlax38 · 19-05-2018 10:47:01

apt-get install firmware-iwlwifi OK

Reboot

 journalctl -r -p err

root@tlax38-PC:/home/tlax38#  journalctl -r -p err

-- Logs begin at Sat 2018-05-19 11:43:19 CEST, end at Sat 2018-05-19 11:45:05 CE

mai 19 11:44:10 tlax38-PC bluetoothd[669]: RFCOMM server failed for Headset Voic

mai 19 11:43:30 tlax38-PC bluetoothd[669]: sap-server: Operation not permitted (

mai 19 11:43:30 tlax38-PC bluetoothd[669]: Sap driver initialization failed.

mai 19 11:43:30 tlax38-PC bluetoothd[669]: Failed to obtain handles for "Service

mai 19 11:43:29 tlax38-PC avahi-daemon[717]: chroot.c: open() failed: No such fi

lines 1-6/6 (END)...skipping...

-- Logs begin at Sat 2018-05-19 11:43:19 CEST, end at Sat 2018-05-19 11:45:05 CEST. --

mai 19 11:44:10 tlax38-PC bluetoothd[669]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)

mai 19 11:43:30 tlax38-PC bluetoothd[669]: sap-server: Operation not permitted (1)

mai 19 11:43:30 tlax38-PC bluetoothd[669]: Sap driver initialization failed.

mai 19 11:43:30 tlax38-PC bluetoothd[669]: Failed to obtain handles for "Service Changed" characteristic

mai 19 11:43:29 tlax38-PC avahi-daemon[717]: chroot.c: open() failed: No such file or directory

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

lines 1-6/6 (END)

anonyme · 19-05-2018 10:57:59

ok c'est plus propre , il te reste ce souci de "nouveau" avec cette carte 960M.

il va te falloir l'aide d'utilisateur de bumblebee sur debian

nota: de mon #15

[    57.232] (==) Depth 24 pixmap format is 32 bpp

[    57.277] (==) modeset(G0): Backing store enabled

[    57.277] (==) modeset(G0): Silken mouse enabled

[    57.278] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    57.305] (==) modeset(G0): DPMS enabled

[    57.305] (II) modeset(G0): [DRI2] Setup complete

[    57.305] (II) modeset(G0): [DRI2]   DRI driver: nouveau

[    57.305] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau

pour une carte discrète c'est correct , mais avec bumblebee ça ne fonctionne pas
tu te souvient pas comment ça été résolu sur ta première installation ?

Dernière modification par anonyme (19-05-2018 11:14:22)

Debian-facile

#1 18-05-2018 12:38:23

Freeze après réinstall Debian

#2 18-05-2018 12:52:56

Re : Freeze après réinstall Debian

#3 18-05-2018 13:19:55

Re : Freeze après réinstall Debian

#4 18-05-2018 13:30:42

Re : Freeze après réinstall Debian

#5 18-05-2018 13:58:46

Re : Freeze après réinstall Debian

#6 18-05-2018 14:12:42

Re : Freeze après réinstall Debian

#7 18-05-2018 14:57:57

Re : Freeze après réinstall Debian

#8 18-05-2018 15:12:42

Re : Freeze après réinstall Debian

#9 18-05-2018 15:21:55

Re : Freeze après réinstall Debian

#10 18-05-2018 15:43:03

Re : Freeze après réinstall Debian

#11 18-05-2018 15:46:32

Re : Freeze après réinstall Debian

#12 18-05-2018 16:12:51

Re : Freeze après réinstall Debian

#13 18-05-2018 16:46:42

Re : Freeze après réinstall Debian

#14 18-05-2018 16:53:09

Re : Freeze après réinstall Debian

#15 18-05-2018 17:07:59

Re : Freeze après réinstall Debian

#16 18-05-2018 19:10:22

Re : Freeze après réinstall Debian

#17 18-05-2018 22:24:03

Re : Freeze après réinstall Debian

#18 19-05-2018 09:48:55

Re : Freeze après réinstall Debian

#19 19-05-2018 10:07:47

Re : Freeze après réinstall Debian

#20 19-05-2018 10:14:01

Re : Freeze après réinstall Debian

#21 19-05-2018 10:17:01

Re : Freeze après réinstall Debian

#22 19-05-2018 10:28:31

Re : Freeze après réinstall Debian

#23 19-05-2018 10:37:52

Re : Freeze après réinstall Debian

#24 19-05-2018 10:47:01

Re : Freeze après réinstall Debian

#25 19-05-2018 10:57:59

Re : Freeze après réinstall Debian

Pied de page des forums